Refine
Document Type
- Article (30)
- Conference Proceeding (22)
- Doctoral Thesis (3)
Institute
Keywords
- 2003 (30)
- Bauhaus-Kolloquium (30)
- Weimar (30)
- Architektur (15)
- Architekturtheorie (5)
- Virtuelle Realität (5)
- CAD (4)
- Modellierung (4)
- Neue Medien (4)
- Raum (4)
Year of publication
- 2003 (55) (remove)
A lot of real-life problems lead frequently to the solution of a complicated (large scale, multicriteria, unstable, nonsmooth etc.) nonlinear optimization problem. In order to cope with large scale problems and to develop many optimum plans a hiearchical approach to problem solving may be useful. The idea of hierarchical decision making is to reduce the overall complex problem into smaller and simpler approximate problems (subproblems) which may thereupon treated independently. One way to break a problem into smaller subproblems is the use of decomposition-coordination schemes. For finding proper values for coordination parameters in convex programming some rapidly convergent iterative methods are developed, their convergence properties and computational aspects are examined. Problems of their global implementation and polyalgorithmic approach are discussed as well.
Most of the existing seismic resistant design codes are based on the response spectrum theory. The influence of inelastic deformations can be evaluated by considering inelastic type of resisting force and then the inelastic spectrum is considerably different from the elastic one. Also, the influence of stiffness degradation and strength deterioration can be accounted for by including more precise models from material point of view. In some recent papers the corresponding changes in response spectra due to the P- Ä effect are discussed. The experience accumulated from the recent earthquakes indicates that structural pounding may considerably influence the response of structures and should be taken into account in design procedures. The most convenient way to do that is to predict the influence of the pounding on the response spectra for accelerations, velocities and displacements. Generally speaking the contact problems such as pounding are characterized by large extent of nonlinearity and slow convergence of the computational procedures. Thus obtaining spectra where the contact problem is accounted for seems very attractive from engineering point of view because could easy be implemented into the design procedures. However it is worth nothing that there is not rigorous mathematical proof that the original system can be decomposed into single equations related to single degree of freedom systems. It is the porpose of the paper to study the influence of the pounding on the response spectra and to evaluate the amplification due to the impact. For this purpose two adjacent SDOF systems are considered that are able to interact during the vibration process. This problem is solved versus the elastic stiffness ratio, which appears to be very important for such assemblage. The contact between masses is numerically simulated using opening gap elements as links. Comparisons between calculated response spectra and linear response spectra are made in order to derive analytical relationships to simply obtain the contribution of pounding. The results are graphically illustrated in response spectra format and the influence of the stiffness ratio is clarified.
The development of a consistent material model for textile reinforced concrete requires the formulation and calibration of several sub-models on different resolution scales. Each of these models represents the material structure at the corresponding scale. While the models at the micro-level are able to capture the fundamental failure and damage mechanisms of the material components (e.g. filament rupture and debonding from the matrix) their computational costs limit their application to the small size representative unit cells of the material structure. On the other hand, the macro-level models provide a sufficient performance at the expense of limited range of applicability. Due to the complex structuring of the textile reinforced concrete at several levels (filament - yarn - textile - matrix) it is a non-trivial task to develop a multiscale model from scratch. It is rather more effective to develop a set of conceptually related sub-models for each structural level covering the selected phenomena of the material behavior. The homogenized effective material properties obtained at the lower level may be verified and validated using experiments and models at the higher level(s). In this paper the development of a consistent material model for textile reinforced concrete is presented. Load carrying and failure mechanisms at the micro, meso and macro scales are described and models with the focus on the specified scales are introduced. The models currently being developed in the framework of the collaborative research center are classified and evaluated with respect to the failure mechanisms being captured. The micromechanical modeling of the yarn and bonding behavior is discussed in detail and the correspondence with the experiments focused on the selected failure and interaction mechanisms is shown. The example of modeling the bond layer demonstrates the application of the presented strategy.
Die vorliegende Dissertation zeigt am Beispiel der Entwicklung eines modernen geriatrischen Zentrums, dass Architektur einen eigenständigen Beitrag dazu leisten kann, die Probleme des Alters in der heutigen Gesellschaft anzunehmen und zu bewältigen. Die Arbeit setzt zum einen an stadtplanerischen Defiziten der vergangenen Jahrzehnte an und verdeutlicht, wie ein bedürfnisgerechtes, innerstädtisches geriatrisches Zentrum dem Leitbild der „humanen Stadt“ zu entsprechen vermag, um damit die Stadt wieder zu einem multifunktionalen Erlebnisraum für alle Bevölkerungsgruppen werden zu lassen. Zum anderen greift sie die aktuelle gesundheitspolitische Debatte auf und weist nach, dass ein solches Zentrum als integrierte Verbundlösung, die alle Versorgungsstrukturen unter einem Dach anbietet, ideal dazu geeignet ist, die Anforderungen unserer Zeit auf geriatrischem und pflegerischem Gebiet zu erfüllen. Die Anforderungen an eine derartige Einrichtung sind umfangreich und differenziert. Sie werden unter Heranziehung aktueller Forschungsergebnisse aus stadtsoziologischer, psychologischer, gerontologischer und sozialökologischer Sicht hergeleitet und in praktische architektonische bzw. baukonstruktive Handlungsanweisungen umgesetzt. Als zentrale, übergeordnete Anforderungen neben optimaler medizinischer und pflegerischer Betreuung werden herausgearbeitet: 1. Erhöhung der Lebenszufriedenheit der Bewohner 2. Stärkung der Autonomie und Selbstständigkeit der älteren Menschen 3. Befolgung des Grundsatzes >Prävention vor Rehabilitation, Rehabilitation vor Pflege< 4. Förderung eines selbstbestimmten Lebens in vertrauter Umgebung bis ins hohe Alter 5. Gewährung von Geborgenheits- und Heimatgefühlen 6. Gemeinwesenorientierung und enge Anbindung an die Strukturen des Quartiers 7. Erhaltung bzw. Stärkung der sozialen Integration der älteren und kranken Menschen 8. Förderung eines hohen Aktivitätsniveaus und einer anspruchsvollen Freizeitgestaltung 9. Bereitstellung einer anregenden sowie sicheren, weil Orientierung gebenden Umgebung Das vorgestellte geriatrische Zentrum bildet die architektonische Entsprechung zum gesellschaftlichen Strukturwandel des Alters und zu den gesundheits- und pflegepolitischen Entwicklungen unserer Zeit und leistet damit einen eigenständigen Beitrag, die gesundheitlichen und sozialen Probleme alter Menschen in unserer Gesellschaft zu lindern, in dem nutzerorientierte Gebäudestrukturen geschaffen werden, die einem integrativen Netzwerk aus Wohn-, Therapie- und Pflegeformen Raum geben. Damit steht das geriatrische Zentrum beispielhaft für eine Architektur, die stets von den Bedürfnissen der Menschen ausgeht und mit baulichen Lösungen auf die sozialen Herausforderungen unserer Zeit reagiert.
Hannah and her sisters
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points.
Skinless architecture
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
The problem F|n=2|F is to minimize the given objective function F(C1,m, C2,m) of completion times Ci,m of two jobs i Î J={1, 2} processed on m machines M={1, 2, …, m}. Both jobs have the same technological route through m machines. Processing time ti,k of job iÎ J on machine kÎ M is known. Operation preemptions are not allowed. Let R2m be space of non-negative 2m-dimensional real vectors t=(t1,1,…, t1,m, t2,1,…, t2,m) with Chebyshev’s distance d(t, t*). To solve problem F|n=2|F, we can use the geometric algorithm, which includes the following steps: 1) construct digraph (V, A) for problem F|n=2|F and find so-called border vertices in (V, A); 2) construct the set of trajectories corresponding to the shortest paths Rt in digraph (V, A) from the origin vertex to each of the border vertices; 3) find an optimal path in the set Rt that represents a schedule with minimal value of the objective function F. Let path tu Î Rt be optimal for the problem F|n=2|F with operation processing times defined by vector t. If for any small positive real number e > 0 there exists vector t*Î R2m such that d(t, t*) = e and path tu is not optimal for the problem F|n=2|F with operation processing times defined by vector t*, then optimality of path tu is not stable. The main result of the paper is the proof of necessary and sufficient conditions for optimality stability of path tu. If objective function F is continuous non-decreasing (e.g., makespan, total completion time, maximal lateness or total tardiness), then to test whether optimality of the path tu Î Rt is stable takes O(m log m) time.
The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet.
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
SYSBAT - An Application to the Building ProductionBased on Computer Supported Cooperative Work
(2003)
Our proposed solution is to enable partners of a construction project to share all the technical data produced and handled during the building production process by building a system through the use of internet technology. The system links distributed databases and allows building partners to access remotely and manipulate specific information. It provides an updated building representation that is being enriched and refined all along the building production process. A recent collaboration with Nemetschek France (subsidiary company of Nemetschek AG, AEC CAD software leader) focus on a building product repository available in a web context. The aim is to help building project actors to choose a technical solution that fits its professional needs, and maintain our information system with up to date information. It starts with the possibility to build on line building product catalogs, in order to link Allplan CAD entities with building technical features. This paper presents the conceptual approaches on which our information system is built. Starting from a general organization diagram organization, we focus on the product and the description branches of construction works (including last IFC model specifications). Our aim is to add decisional support to the construction works selection process. To do so, we consider the actor's role upon the system and the pieces of information each one needs to achieve a given task.
The conventional way of describing an image is in terms of its canonical pixel-based representation. Other image description techniques are based on image transformations. Such an image transformation converts a canonical image representation into a representation in which specific properties of an image are described more explicitly. In most transformations, images are locally approximated within a window by a linear combination of a number of a priori selected patterns. The coefficients of such a decomposition then provide the desired image representation. The Hermite transform is an image transformation technique introduced by Martens. It uses overlapping Gaussian windows and projects images locally onto a basis of orthogonal polynomials. As the analysis filters needed for the Hermite transform are derivatives of Gaussians, Hermite analysis is in close agreement with the information analysis carried out by the human visual system. In this paper we construct a new higher dimensional Hermite transform within the framework of Quaternionic Analysis. The building blocks for this construction are the Clifford-Hermite polynomials rewritten in terms of Quaternionic analysis. Furthermore, we compare this newly introduced Hermite transform with the Quaternionic-Hermite Continuous Wavelet transform. The Continuous Wavelet transform is a signal analysis technique suitable for non-stationary, inhomogeneous signals for which Fourier analysis is inadequate. Finally the developed three dimensional filter functions of the Quaternionic-Hermite transform are tested with traditional scalar benchmark signals upon their selectivity at detecting pointwise singularities.
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Architecture and association
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
A realistic and reliable model is an important precondition for the simulation of revitalization tasks and the estimation of system properties of existing buildings. Thereby, the main focus lies on the parameter identification, the optimization strategies and the preparation of experiments. As usual structures are modeled by the finite element method. This as well as other techniques are based on idealizations and empiric material properties. Within one theory the parameters of the model should be approximated by gradually performed experiments and their analysis. This approximation method is performed by solving an optimization problem, which is usually non-convex, of high dimension and possesses a non-differentiable objective function. Therefore we use an optimization procedure based on genetic algorithms which was implemented by using the program package SLang...
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
The empire of language
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used.
Architecture and Air
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Building design, realization, operation and refurbishment have to take into account the environmental impacts as well as the resulting costs over a long period of time. LCA methods had to be developed for buildings because of their complexity, their long life duration and through a large number of actors who are involved. This was realized by integrating life cycle analysis, life cycle costing and building product models in integrated LCA models. However the use of such models leads to difficulties. The principal ones are the uncertainty treatment in LCA models and the lack of experience of practitioners who are not LCA specialists. Answers to these problems are the management of uncertainty and the development of simplified models for building design, construction and operation. This can be achieved with the mean of experimental plans or Monte Carlo simulation. The paper will focus on how these techniques can be used, what are their possibilities and disadvantages, particularly concerning the development of simplified models.
In den zurückliegenden Jahren wurden an der Professur Massivbau I umfangreiche Untersuchungen zur Modellbildung und rechnerischen Erfassung des Tragverhaltens von Tragwerken und Tragwerkselementen aus Stahlbeton und Spannbeton unter Berücksichtigung von Rißbildungen und Plastizierungen durchgeführt. Diesen Untersuchungen liegt als einheitliches methodisches Konzept der mathematischen Problembeschreibung und Problemlösung die mathematische Optimierung zugrunde. Bereits anläßlich des IKM 1994 [1] hatte der Verfasser Gelegenheit, zusammenfassend über Ergebnisse bei der Anwendung der mathematischen Optimierung im Bereich der nichtlinearen Tragwerksanalyse zu berichten. Der vorliegende Beitrag, soll einen Überblick über seitdem untersuchte Problemkreise und dabei gewonnene Ergebnisse und Erfahrungen vermitteln. Bei der Anwendung der linearen und quadratischen Optimierung sind wegen der geforderten Linearität der Nebenbedingungen Vereinfachungen bei der Modellbildung des stahlbetonspezifischen Tragverhaltens unumgänglich. Besonders betroffen sind die Ansätze zur Beschreibungen des Materialverhaltens. Durch den Einsatz allgemeiner nichtlinearer mathematischer Optimierungsmethoden lässt sich eine methodisch bedingte Linearisierung des Berechnungsmodells umgehen....
Today´s procedures for the awarding of public construction performance contracts are mainly paper-based. Although the usage of electronic means is permitted in the VOB, the regulations are not sufficient yet. Especially software agents within the AEC-bidding process were not considered at all. The acceptance of an agent-based virtual marketplace for AEC-bidding depends on a reliable and trustworthy public key infrastructure according to the (German) digital signature act. Only if confidentiality, integrity, non-repudiation, and authentication are provided reliably, users will assign sensitive business processes like public tendering procedures to software agents. The development of a secure agent-based virtual marketplace for AEC-bidding according to legal regulations is an entirely new approach from a technical as well as from a legal point of view. The objective of this research project is the development of intelligent software-agents which are able to legally call for bids, to calculate proposals, and to award the successful bidder.
The construction industry is suffering form the existence of isolated islands of software applications and bottle neck solutions. The idea of an integrated virtual database that consists of separated platforms, representing various disciplines, depending on the web technology is envisaged to solve the problem of integration. This paper is about the production and use of OIPs (Object Information Packs) as a part of the construction material product in the form of XML files that include all the technical and commercial data of the product, which might be needed by any discipline in its overall life cycle. This object information pack is neutral and independent of any software application. It is assumed to fit in a building product model at the IFC (resource layer). An example of brick - wall aggregation process is used to demonstrate the capability of the technology and the ability of non computer science experts to use it.
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading.
Spatializing difference
(2003)
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
We consider an industrial application consisting of the mass minimization of a frame in an injection moulding machine. This frame has to compensate the forces acting on the mould inside the machine and has to fulfill certain critical constraints. The deformation of that frame with constant thickness is described by the plain stress state equations for linear elasticity. If the thickness varies then we use a generalized plain stress state with constant thickness in the coarse grid elements. These direct problems are solved by an adaptive multigrid solver. The mass minimization problem leads to a constrained minimization problem for a non-linear functional which will be solved by some standard optimization algorithm which requires the gradients with respect to design parameters. For the shape optimization problem, we assume that the machine components consist of simple geometrical primitives determined by a few design parameters. Therefore, we calculate the gradient in the shape optimization by means of numerical differentiation which requires the solution of approximately 4 direct problems per design parameter. The adaptive solver guarantees the detection of critical regions automatically, and ensures a good approximation to the exact solution of the direct problem. This rather slow approach can be significantly accelerated by using the adjoint method to express the gradient. It will be combined with a direct implementation of several terms that appear after applying the chain rule to the gradient.
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
Usually, the co-ordination of design and planning tasks of a project in the construction industries is done in a paper based way. Subsequent modifications have to be handled manually. The effects of modifications cannot be determined automatically. The approach to specify a complete process model before project start does not consider the requirements of the construction industries. The effort of specification at the beginning and during the process (modifications) does not justify the use of standard process model techniques. A new approach is presented in the according paper. A complete process model is deducted on the basis of a core. The core consists of process elements and specific relations between them. Modifications need to be specified in the core only. The effort of specification is therefore reduced. The deduction of the complete process is based on the graph theory. Algorithms of the graph theory are also used to determine the effects of modifications during project work.
Discrete-continual Finite Element Method of Analysis for Three-dimensional Curvilinear Structures
(2003)
This paper is devoted to discrete-continual finite element method (DCFEM) of analysis for three-dimensional curvilinear structures. Operational and variational formulations of the problem in the ring coordinate system are presented. The discrete-continual design model for structures with constant physical and geometrical parameters in longitudinal direction is offered on the basis of so-called curvilinear discrete-continual finite elements. Element coordinate system, approximation of nodal unknowns, construction of element nodal load vector are under consideration. Element system of differential equations is formulated with use of special generalized block-structured stiffness matrix of discrete-continual finite element. Local differential relations are formulated. Resultant multipoint boundary problem for system of ordinary differential equations is given. Method of analytical solution of multipoint boundary problems in structural analysis is offered as well. Its major peculiarities include universality, computer-oriented algorithm involving theory of distributions, computational stability, optimal conditionality of resultant systems, partial Jordan decomposition of matrix of coefficients, eliminating necessity of calculation of root vectors. Brief information concerning developed software is provided.
Hyperbolic Qp-scales
(2003)
The Qp-scales were first introduced in [1] as interpolation spaces between the Bloch and Dirichlet spaces in the complex space. ... However, such treatment presents the disadvantage of only considering the Euclidean case. In order to obtain an approach to homogeneous hyperbolic manifolds, the projective model of Gel'fand was retaken in [2]. With the help of a convenient fundamental solution for the hyperbolic (homogeneous of degree ®) D® (see [5]) it was introduced in [7] and [3] equivalent Qp scales for homogeneous hyperbolic spaces. In this talk we shall present and study some properties of this hyperbolic scale.
Iso-parametric finite elements with linear shape functions show in general a too stiff element behavior, called locking. By the investigation of structural parts under bending loading the so-called shear locking appears, because these elements can not reproduce pure bending modes. Many studies dealt with the locking problem and a number of methods to avoid the undesirable effects have been developed. Two well known methods are the >Assumed Natural Strain< (ANS) method and the >Enhanced Assumed Strain< (EAS) method. In this study the EAS method is applied to a four-node plane element with four EAS-parameters. The paper will describe the well-known linear formulation, its extension to nonlinear materials and the modeling of material uncertainties with random fields. For nonlinear material behavior the EAS parameters can not be determined directly. Here the problem is solved by using an internal iteration at the element level, which is much more efficient and stable than the determination via a global iteration. To verify the deterministic element behavior the results of common test examples are presented for linear and nonlinear materials. The modeling of material uncertainties is done by point-discretized random fields. To show the applicability of the element for stochastic finite element calculations Latin Hypercube Sampling was applied to investigate the stochastic hardening behavior of a cantilever beam with nonlinear material. The enhanced linear element can be applied as an alternative to higher-order finite elements where more nodes are necessary. The presented element formulation can be used in a similar manner to improve stochastic linear solid elements.
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
In Bauplanungssystemen können XML-Technologien in vielen Bereichen eingesetzt werden mit dem Ziel, diese Systeme modular und webfähig zu gestalten. Der Einsatz lohnt als Basis-Datenstruktur für verschiedene rechnerinterne Modelle, Steuerungsstruktur für Customizing von Anwendungen, Bindeglied zwischen objektbasierten Systemen, Kommunikationsprotokoll zwischen Komponenten. Es ist möglich, komplexe Objekte aus dem Planungsalltag mittels XML arzustellen, zu speichern und zu verarbeiten. Es ist möglich, entsprechende Komponenten im Netz zu verteilen bzw. über Internet zu verbinden. Die heute dominierende Sicht auf XML als Austauschmedium wird ergänzt um die Idee eines XML-basierten Systems: Entwurfsobjekte können als >XML-Objekte< formuliert und im Sinne eines late binding verwendet werden.
After more than hundred years of arguments in favour and against quaternions, of exciting odysseys with new insights as well as disillusions about their usefulness the mathematical world saw in the last 40 years a burst in the application of quaternions and its generalizations in almost all disciplines that are dealing with problems in more than two dimensions. Our aim is to sketch some ideas - necessarily in a very concise and far from being exhaustive manner - which contributed to the picture of the recent development. With the help of some historical reminiscences we firstly try to draw attention to quaternions as a special case of Clifford Algebras which play the role of a unifying language in the Babylon of several different mathematical languages. Secondly, we refer to the use of quaternions as a tool for modelling problems and at the same time for simplifying the algebraic calculus in almost all applied sciences. Finally, we intend to show that quaternions in combination with classical and modern analytic methods are a powerful tool for solving concrete problems thereby giving origin to the development of Quaternionic Analysis and, more general, of Clifford Analysis.
In this Thesis we study some complex and hypercomplex function spaces and classes such as hypercomplex Besov spaces, Bloch space and Op spaces as well as the class of basic sets of polynomials in several complex variables. It is shown that hyperholomorphic Besov spaces can be applied to characterize the hyperholomorphic Bloch space. Moreover, we consider BMOM and VMOM spaces.
Das zentrale Problem der Arbeit ist die Untersuchung der Rolle von Orten und Räumen für die Evolution bestimmter visueller Medien im 19. Jahrhundert. Die historische Schwelle wird mit der Erfindung des Panoramas, der Geburt der Passage und der Reform der Bibliothek um 1800 markiert. Ausgehend von der Systemtheorie Luhmanns und dem französischen Poststrukturalismus (Baudry, Lyotard, Foucault) entwickelt die Arbeit dazu einen Begriff des Dispositivs, der zur Untersuchung des Verhältnisses von Objekt, Betrachter und Apparat verwendet wird. Im Mittelpunkt steht dabei das Wechselverhältnis von Wahrnehmung und Kommunikation. Mit Bezug auf Kants »Kritik der Urteilskraft« wird dabei ein neuer Vorschlag für den Code des Kunstsystems – gestaltet/nicht gestaltet – entwickelt. Die zentralen Begriffe für die Definition des Dispositivs sind Abschirmung, Distanzierung und Inszenierung. Damit wird der Versuch unternommen, die Frage des Raumes in der Systemtheorie zu klären. Die historische Analyse beschreibt die Entwicklung vom Theater zum Kino im 19. und frühen 20. Jahrhundert und fokussiert dabei vor allem auf das Festspielhaus Wagners in Bayreuth. Abschließend wird der Beitrag der Warenhäuser und des Schaufensters zur Evolution des Wirtschaftsystems untersucht.