600 Technik, Medizin, angewandte Wissenschaften
Refine
Document Type
- Doctoral Thesis (57)
- Article (31)
- Master's Thesis (11)
- Preprint (7)
- Bachelor Thesis (4)
- Book (2)
- Report (2)
Institute
- Institut für Strukturmechanik (ISM) (35)
- Professur Baubetrieb und Bauverfahren (9)
- Bauhaus-Institut für zukunftsweisende Infrastruktursysteme (b.is) (8)
- Professur Informatik in der Architektur (7)
- Professur Modellierung und Simulation - Konstruktion (7)
- F. A. Finger-Institut für Baustoffkunde (FIB) (5)
- Professur Bauchemie und Polymere Werkstoffe (4)
- Professur Stahl- und Hybridbau (4)
- Professur Bauphysik (3)
- Professur Betriebswirtschaftslehre im Bauwesen (3)
Keywords
- Maschinelles Lernen (8)
- OA-Publikationsfonds2022 (8)
- Finite-Elemente-Methode (6)
- Isogeometric Analysis (5)
- Aerodynamik (4)
- Beton (4)
- Erdbeben (4)
- Simulation (4)
- machine learning (4)
- Abwasser (3)
This term paper presents a literature review and discusses concepts of the following point: 1- Factors affecting small-strain stiffness in soil; 2- Methods to determine small-strain shear stiffness in laboratory and in-situ; 3- Brief introduction into wave propagation and 4- Bender elements technique to determine shear wave velocity in soil.
The initial shear modulus, Gmax, of soil is an important parameter for a variety of geotechnical design applications. This modulus is typically associated with shear strain levels about 5*10^-3% and below. The critical role of soil stiffness at small-strains in the design and analysis of geotechnical infrastructure is now widely accepted.
Gmax is a key parameter in small-strain dynamic analyses such as those to predict soil behavior or soil-structure interaction during earthquake, explosions, machine or traffic vibration where it is necessary to know how the shear modulus degrades from its small-strain value as the level of shear strain increases. Gmax can be equally important for small-strain cyclic situations such as those caused by wind or wave loading and for small-strain static situations as well. Gmax may also be used as an indirect indication of various soil parameters, as it, in many cases, correlates well to other soil properties such as density and sample disturbance. In recent years, a technique using bender elements was developed to investigate the small-strain shear modulus Gmax.
The objective of this thesis is to study the initial shear stiffness for various sands with different void ratios, densities, grain size distribution under dry and saturated conditions, then to compare empirical equations to predict Gmax and results from other testing devices with results of bender elements from this study.
Der vorliegende Beitrag ist in zwei thematische Teilebereiche gegliedert. Der erste Teil beschäftigt sich mit der Analyse von Graphen, insbesondere von Graphen, die Straßennetzwerke repräsentieren. Hierzu werden Methoden aus der Graphentheorie angewendet und Kenngrößen aus der Space Syntax Methode ausgewertet. Ein Framework, welches basierend auf der Graphentheorie in Architektur und Stadtplanung Einzug gehalten hat, ist die Space Syntax Methode. Sie umfasst die Ableitung unterschiedlicher Kenngrößen eines Graphen bzw. Netzwerkes, wodurch eine Analyse für architektonische und stadtplanerische Zwecke ermöglicht wird.
Der zweite Teil dieses Berichts beschäftigt sich mit der Generierung von Graphen, insbe-sondere der von Straßennetzwerkgraphen. Die generativen Methoden basieren zum Teil auf den gewonnenen Erkenntnissen der Analyse von Straßennetzwerken. Es werden unterschiedliche Ansätze untersucht, um verschiedene Parameterwerte zur Generierung von Straßengraphen festzulegen. Als Ergebnis der Arbeiten ist ein Softwaretool entstanden, welches es erlaubt, auf Grundlage einer Voronoi-Tesselierung realistische Straßennetzwerkgraphen zu erzeugen.
Das Unterteilen einer vorgegebenen Grundfläche in Zonen und Räume ist eine im Architekturentwurf häufig eingesetzte Methode zur Grundrissentwicklung. Für deren Automatisierung können Unterteilungsalgorithmen betrachtet werden, die einen vorgegebenen, mehrdimensionalen Raum nach einer festgelegten Regel unterteilen. Neben dem Einsatz in der Computergrafik zur Polygondarstellung und im Floorplanning zur Optimierung von Platinen-, Chip- und Anlagenlayouts finden Unterteilungsalgorithmen zunehmend Anwendung bei der automatischen Generierung von Stadt- und Gebäudegrundrissen, insbesondere in Computerspielen.
Im Rahmen des Forschungsprojekts Kremlas wurde das gestalterische und generative Potential von Unterteilungsalgorithmen im Hinblick auf architektonische Fragestellungen und ihre Einsatzmöglichkeiten zur Entwicklung einer kreativen evolutionären Entwurfsmethode zur Lösung von Layoutproblemen in Architektur und Städtebau untersucht. Es entstand ein generativer Mechanismus, der eine Unterteilungsfolge zufällig erstellt und Grundrisse mit einer festgelegten Anzahl an Räumen mit bestimmter Raumgröße durch Unterteilung generiert. In Kombination mit evolutionären Algorithmen lassen sich die erhaltenen Layoutlösungen zudem hinsichtlich architektonisch relevanter Kriterien optimieren, für die im vorliegenden Fall Nachbarschaftsbeziehungen zwischen einzelnen Räumen betrachtet wurden.
Das vorliegende Arbeitspapier beschäftigt sich mit der Thematik der Nutzerinteraktion bei computerbasierten generativen Systemen. Zunächst wird erläutert, warum es notwendig ist, den Nutzer eines solchen Systems in den Generierungsprozess zu involvieren. Darauf aufbauend werden Anforderungen an ein interaktives generatives System formuliert. Anhand eines Systems zur Generierung von Layouts werden Methoden diskutiert, um diesen Anforderungen gerecht zu werden. Es wird gezeigt, dass sich insbesondere evolutionäre Algorithmen für ein interaktives entwurfsunterstützendes System eignen. Es wird kurz beschrieben, wie sich Layoutprobleme durch eine evolutionäre Strategie lösen lassen. Abschließend werden Fragen bezüglich der grafischen Darstellung von Layoutlösungen und der Interaktion mit dem Dargestellten diskutiert.
Forscher prognostizieren in den kommenden Jahren eine Klimaerwärmung bis zu 6 ° C. Aus diesem Grund wurde das EU – Forschungsprojekt „ Climate for Culture“ ins Leben gerufen, um Auswirkungen dieses Klimawandels auf denkmalgeschützte, kulturhistorische Gebäude zu untersuchen. Ziel ist es, entsprechende Schutzmaßnahmen in konservatorischer Hinsicht zu erarbeiten.
Aufgrund des Zusammenhanges zwischen Temperatur und Luftfeuchte führt diese Klimaerwärmung auch zu einer Änderung des Feuchtehaushaltes im Außenbereich und, bedingt durch einen immer vorhandenen Luftwechsel, schließlich auch im Innenbereich von Gebäuden.
Die Fähigkeit eines Gebäudes, durch seine Beschaffenheit auf Feuchteeinflüsse zu reagieren, wird maßgeblich bestimmt durch seine Möglichkeit, in der Gebäudehülle und der vorhandenen Einrichtung anfallende Feuchte zwischenzuspeichern und diese zeitversetzt wieder an die Umgebung abzugeben. Diese Fähigkeit sorptiver Flächen zur Feuchtepufferung konnte bislang nur mit erheblichem Aufwand ermittelt werden.
In der vorliegenden Arbeit wird versucht, durch einfachere Methoden mittels hygrothermischer Simulation einen „Zweizahlwert“ zu erhalten, mit dem sich diese Raumkompetenz schnell und nachvollziehbar darstellen lässt.
6 Zusammenfassung und Ausblick
Die hydrothermal induzierte Phasentransformation konnte für ATZ-Keramik mit tiefenge-mittelten und tiefenaufgelösten Methoden charkterisiert und quantifiziert werden.
Die zeit- und temperaturabhängige Alterungskinetik von ATZ wurde durch neun Tempera-turstufen in einem Temperaturbereich von 50 °C bis 134 °C untersucht und die kinetischen Parameter nummerisch bestimmt. Für 3Y-TZP wurde diese Prozedur bei drei Temperaturen im Temperaturbereich von 70 °C bis 134 °C angewendet. Aufgrund des ARRHENIUS-Verhaltens der Umwandlungskinetik konnte der zeitliche Verlauf der isotherm stattfinden-den hydrothermal induzierten Phasentransformation bei Körpertemperatur simuliert wer-den. Die Simulation dient zur Bewertung der Langzeitstabilität von medizinischen Implanta-ten aus ATZ bzw. 3Y-TZP. Die Untersuchungen wurden in Wasser und in Wasserdampf bzw. wasserdampfgesättigter Luft durchgeführt. Die Langzeitsimulation für 3Y-TZP wurde an-hand von Explantat-Untersuchungen verifiziert.
ATZ zeigt gegenüber 3Y-TZP eine höhere Alterungsstabilität bezogen auf die zeitliche Ent-wicklung der monoklinen Phase. Im Hinblick auf die Oberflächenhärte, die durch die Pha-senumwandlung stark beeinflusst wird, erweist sich ATZ über einen langen Alterungszeit-raum stabiler als 3Y-TZP. Bis zu einem monoklinen Gehalt von 40 % beweist ATZ einen deutlichen Härtevorteil gegenüber 3Y TZP, dieser entspricht in der Langzeitsimulation für die Wasserlagerung ca. 35 Jahre. Das wirkt sich insbesondere bei Verschleißpaarungen wie beim künstlichen Hüftgelenk positiv aus.
Verschleißuntersuchungen an einer neu entwickelten Kugel-auf-Scheibe-Geometrie mit li-nearer Kinematik, die dem Hüftgelenk nachempfunden wurde, belegen die vorteilhaften Verschleißeigenschaften von ATZ in Form von sehr geringen Abtragsraten und einer intak-ten Oberfläche nach 720 000 absolvierten Zyklen. Dabei wurde sogar eine Aufhärtung der Oberfläche durch die Verschleißbeanspruchung um bis zu 8 % nachgewiesen.
Bei der tiefengemittelten Charakterisierung der hydrothermalen Alterung wurde in beiden Materialtypen festgestellt, dass die Geschwindigkeit der Phasentransformation neben der Temperatur merklich von der Änderung der H2O-Stoffmengenkonzentrantion an der Ober-fläche der Keramik abhängig ist, was sich mit den unterschiedlichen Aktivierungsenergien für Wasser- bzw. Wasserdampflagerung belegen lässt. Die Aktivierungsenergie Ea der hyd-rothermalen Phasentransformation wurde mit Hilfe der ARRHENIUS-Beziehung ermittelt und beträgt für ATZ bei Wasserdampflagerung 102 kJ/mol und bei Wasserlagerung 92 kJ/mol. Für Y-TZP beträgt die Aktivierungsenergie 114 kJ/mol bei Wasserdampflagerung und 102 kJ/mol bei Wasserlagerung. Der resultierende präexponentielle Faktor k0 unterscheidet sich für Wasserlagerung und Wasserdampflagerung um eine Größenordnung, was auf einen leicht andersartigen thermisch aktivierten Gesamtprozess hinweist.
Der Avrami-Exponent n, der einen Hinweis auf den Mechanismus der Keimbildung sowie deren geometrische Ordnung geben kann, zeigte keine signifikante Abhängigkeit von der Temperatur und vom Umgebungsmedium. Er ist dagegen zeitabhängig und fällt mit zuneh-mender Alterungszeit, d.h. mit zunehmendem monoklinem Gehalt von ca. 4 auf 0,5 ab, was auf eine abnehmende Keimbildungsrate hindeutet. In Verbindung mit weiteren Untersu-chungen durch unabhängige und zum Teil tiefenauflösende Methoden wie GIXRD, NRA und Knoop-Mikrohärte-Messungen lässt sich der Alterungsmechanismus, bzw. sein zeitlicher und örtlicher Ablauf, durch die drei Stadien A, B und C beschreiben:
A 0-5 ma. % m-ZrO2 Quasi-homogene Keimbildung an bevorzugten Orten wie Kornkan-ten und Kornecken (n≈4), Wassertransport wahrscheinlich via Korngrenzendiffusion, Aufhärtung der Oberfläche
B 5-40 ma. % m-ZrO2 Keimbildung an den Korngrenzflächen bis zur Keimsättigung (n≈2), monokline Randschicht wächst zeitlich linear, Wassertransport konvektiv über Mikrorisse, deutlicher Härteverlust der Oberfläche
C ≥ 40 ma. % m-ZrO2 Wachstum der monoklinen Kristallite von den Korngrenzflächen in die tetragonalen Kristallite unter starker Verzwillingung (n≈0,5), Abnahme der tetragonalen Kristallitgröße, starke Mikrorissbildung, dramatischer Rückgang der Oberflächenhärte
Die Kristallitgröße der monoklinen Phase verbleibt im ATZ über alle drei Abschnitte bei 30 ±5 nm. Ein Anwachsen der Kristallite ist mechanische behindert. Kleinere monokline Kristallite sind im ATZ thermodynamisch instabil. Die Kristallitgröße der tetragonalen Phase fällt in den Abschnitten A und B sehr langsam und in C sehr schnell bis auf 25 nm ab. Bei dieser Kristallitgröße ist die tetragonale Phase gegenüber der monoklinen Phase thermody-namisch stabil. Diese residualen tetragonalen Kristallite weisen nach vollständigem Reakti-onsablauf einem Anteil von 7 ma. % auf. Der Sättigungsgehalt der monoklinen Phase betrug in beiden Materialen unabhängig von der Temperatur bzw. dem Umgebungsmedium 75 % der ZrO2-Phase.
In Abschnitt C besitzt die residuale tetragonale Phase eine starke Orientierung. Dadurch wird die geometrische Bedingtheit der hydrothermal induzierten Phasenumwandlung ver-deutlicht. Die monokline Phase ist über den gesamten Alterungsprozess stark nach m(1 1 1) orientiert, was mit einer bevorzugten Umklapprichtung der c-Achse zur freien Oberfläche hin verbunden ist.
Mit Hilfe der tiefenaufgelösten Phasenanalyse konnte die Wachstumsgeschwindigkeit der monoklinen Randschicht von der Oberfläche in das Volumen untersucht werden. Die Ge-schwindigkeit des Schichtwachstums ist in Abschnitt B nicht zeit- und tiefenabhängig, son-dern konstant mit ausgeprägtem ARRHENIUS-Verhalten (Temperaturabhängigkeit). Die Akti-vierungsenergie der Schichtwachstumsgeschwindigkeit km liegt in der gleichen Größenord-nung wie die der Transformationskonstante k.
Die Umwandlungszone schreitet also mit konstanter Geschwindigkeit in das Volumen fort und hinterlässt ein verzweigtes Mikro- und Nanoriss-System. FESEM-Aufnahmen bestätigen das Vorhandensein einer porösen Randschicht, durch die das Wasser nahezu ungehindert eindringen kann.
NRA Untersuchungen deuten in Stadium A auf Korngrenzendiffusion hin und bestätigen in Stadium B einen konvektiven Transport des Wassers an die Transformationszone. Eine Dif-fusion über Sauerstoffleerstellen im Gitter konnte anhand von Proben aus 8YSZ nicht nach-gewiesen werden. Dagegen kommt es in dem verzweigten Riss- und Porensystem in der gealterten Randschicht zum Rücktransport des Wassers an die Oberfläche, sobald die Pro-ben aus der hydrothermalen Atmosphäre genommen, an Luft gelagert oder in die Hochva-kuumkammer der NRA-Messapparatur eingeschleust werden.
Mikrostrukturelle Untersuchungen an eigens entwickelten Verschleißpaarungen zeigten nach 720000 Zyklen ähnliche Oberflächeneigenschaften wie im Alterungsstadium A. Man kann daher davon ausgehen, dass die Stadien B und C aus Stabilitätsgründen in der tribolo-gischen Kontaktzone nicht existieren können und es dass sich im Falle einer gleichzeitigen, hydrothermalen und tribologischen Beanspruchung um einen stationären Alterungs- und Verschleißprozess handelt. Durch quasiplastische Deformation der monoklinen und tetra-gonalen Kristallite wird die Verschleißrate und die Abriebpartikel bei einer hart /hart Paa-rung aus ATZ deutlich minimiert, so dass ATZ für die Hüftendoprothetik ein durchaus geeig-neten Werkstoff darstellt, der sich auf der Grundlage der in dieser Arbeit gewonnenen Daten über eine Imlantationsdauer von .mehr als 15 Jahre stabil verhalten kann.
Metakaolin made from kaolin is used around the world but rarely in Vietnam where abundant deposits of kaolin is found. The first studies of producing metakaolin were conducted with high quality Vietnamese kaolins. The results showed the potential to produce metakaolin, and its effect has on strength development of mortars and concretes. However, utilisation of a low quality kaolin for producing Vietnamese metakaolin has not been studied so far.
The objectives of this study were to produce a good quality metakaolin made from low quality Vietnamese kaolin and to facilitate the utilisation of Vietnamese metakaolin in composite cements.
In order to reach such goals, the optimal thermal conversion of Vietnamese kaolin into metakaolin was carried out by many investigations, and as such the optimal conversion is found using the analysis results of DSC/TGA, XRD and CSI. During the calcination in a range of 500 – 800 oC lasting for 1 – 5 hours, the characterisation of calcinated kaolin was also monitored for mass loss, BET surface, PSD, density as well as the presence of the residual water. It is found to have a well correlation between residual water and BET surface.
The pozzolanic activity of metakaolin was tested by various methods regarding to the saturated lime method, mCh and TGA-CaO method. The results of the study showed which method is the most suitable one to characterise the real activity of metakaolin and can reach the greatest agreement with concrete performance. Furthermore, the pozzolanic activity results tested using methods were also analysed and compared to each other with respect to the BET surface.
The properties of Vietnam metakaolin was established using investigations on water demand, setting time, spread-flowability, and strength. It is concluded that depending on the intended use of composite cement and weather conditions of cure, each Vietnamese metakaolin can be used appropriately to produce (1) a composite cement with a low water demand (2) a high strength of composite cement (3) a composite cement that aims to reduce CO2 emissions and to improve economics of cement products (4) a high performance mortar.
The durability of metakaolin mortar was tested to find the needed metakaolin content against ASR, sulfat and sulfuric acid attacks successfully.
Modern digital material approaches for the visualization and simulation of heterogeneous materials allow to investigate the behavior of complex multiphase materials with their physical nonlinear material response at various scales. However, these computational techniques require extensive hardware resources with respect to computing power and main memory to solve numerically large-scale discretized models in 3D. Due to a very high number of degrees of freedom, which may rapidly be increased to the two-digit million range, the limited hardware ressources are to be utilized in a most efficient way to enable an execution of the numerical algorithms in minimal computation time. Hence, in the field of computational mechanics, various methods and algorithms can lead to an optimized runtime behavior of nonlinear simulation models, where several approaches are proposed and investigated in this thesis.
Today, the numerical simulation of damage effects in heterogeneous materials is performed by the adaption of multiscale methods. A consistent modeling in the three-dimensional space with an appropriate discretization resolution on each scale (based on a hierarchical or concurrent multiscale model), however, still contains computational challenges in respect to the convergence behavior, the scale transition or the solver performance of the weak coupled problems. The computational efficiency and the distribution among available hardware resources (often based on a parallel hardware architecture) can significantly be improved. In the past years, high-performance computing (HPC) and graphics processing unit (GPU) based computation techniques were established for the investigationof scientific objectives. Their application results in the modification of existing and the development of new computational methods for the numerical implementation, which enables to take advantage of massively clustered computer hardware resources. In the field of numerical simulation in material science, e.g. within the investigation of damage effects in multiphase composites, the suitability of such models is often restricted by the number of degrees of freedom (d.o.f.s) in the three-dimensional spatial discretization. This proves to be difficult for the type of implementation method used for the nonlinear simulation procedure and, simultaneously has a great influence on memory demand and computational time.
In this thesis, a hybrid discretization technique has been developed for the three-dimensional discretization of a three-phase material, which is respecting the numerical efficiency of nonlinear (damage) simulations of these materials. The increase of the computational efficiency is enabled by the improved scalability of the numerical algorithms. Consequently, substructuring methods for partitioning the hybrid mesh were implemented, tested and adapted to the HPC computing framework using several hundred CPU (central processing units) nodes for building the finite element assembly. A memory-efficient iterative and parallelized equation solver combined with a special preconditioning technique for solving the underlying equation system was modified and adapted to enable combined CPU and GPU based computations.
Hence, it is recommended by the author to apply the substructuring method for hybrid meshes, which respects different material phases and their mechanical behavior and which enables to split the structure in elastic and inelastic parts. However, the consideration of the nonlinear material behavior, specified for the corresponding phase, is limited to the inelastic domains only, and by that causes a decreased computing time for the nonlinear procedure. Due to the high numerical effort for such simulations, an alternative approach for the nonlinear finite element analysis, based on the sequential linear analysis, was implemented in respect to scalable HPC. The incremental-iterative procedure in finite element analysis (FEA) during the nonlinear step was then replaced by a sequence of linear FE analysis when damage in critical regions occured, known in literature as saw-tooth approach. As a result, qualitative (smeared) crack initiation in 3D multiphase specimens has efficiently been simulated.
Im Rahmen dieser Arbeit wurde die Entscheidungsfindung im Herstellungsprozess von Brückenkappen untersucht. Es stellte sich heraus, dass die Fuzzy-Methode ein geeignetes Werkzeug sein könnte, die Teilprozesse auf die Möglichkeit ihrer Parallelisierung hin zu untersuchen. Um diese Theorie zu testen, wurde auf den Grundlagen von Arbeiten der Professur Baubetrieb und Bauverfahren der Prozess näher analysiert und unterstützend durch eigene Recherchen ein UML-Diagramm erstellt, welches als Aktivitätsdiagramm ausgebildet wurde. Aufbauend auf diesem Ablauf und den gewonnenen Kenntnissen zur Herstellung einer Brückenkappe, konnten die einzelnen Prozesse zu Teilprozessen, sogenannten Bausteinen, zusammengefasst werden. Diese Bausteine sind entstanden, um die Simulation möglich zu machen, indem der Ablauf weniger komplex wird und nur die Prozesse zu beurteilen sind, die beeinflusst bzw. in ihrer Reihenfolge bis zu einem gewissen Grad variabel sind. Eine erleichterte Interaktion mit den Bausteinen und deren Überführung in ein Simulationsprogramm wurde über Templates realisiert. So besitzt jeder Baustein eine einheitliche Struktur. Unter anderem beinhalten die Bausteine die jeweiligen Ressourcen und Parameter, sowie die Abhängigkeiten der Prozesse untereinander und die zugehörige Priorität. Zur Entscheidungsfindung wurde die Fuzzylogik herangezogen und die Problemstellung der Parallelisierung zum Ziel gesetzt. Die Realisierung wurde über einen Entscheidungsbaum und das daraus resultierende Regelwerk erreicht. Somit ließen sich, ausgehend von einem festgelegten Prozess und durch die Fuzzifizierung der Eingangsparameter Priorität, Prozessdauer und Verfügbarkeit der Ressourcen und Arbeitskräfte, verschiedene Pfade identifizieren, allerdings nur in Verbindung mit den vorher analysierten Abhängigkeiten. Für jeden der Eingangsparameter wurden so Fuzzy-Sets erstellt. Über den Entscheidungsbaum, welcher mit den linguistischen Variablen versehen wurde, konnte über sogenannte "und" - Verknüpfungen das Regelwerk aufgestellt werden. Das gekürzte Regelwerk in dieser Arbeit beinhaltet grundsätzlich nur die Regeln, die auch zu einer wirklichen Entscheidung führen. Daraus folgt, dass es möglich ist mittels der Fuzzy-Methode eine Entscheidung darüber zu fällen, ob zwei Prozesse zu parallelisieren sind oder nicht und aufgetretene Verzögerungen wieder eingeholt werden können.
Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen Lösung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung räumlicher Elemente, z.B. von Parzellen, Gebäuden, Räumen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Forschungsprojekts entstanden.
Die Qualität von Beplankungselementen wirkt sich deutlich auf den Feuerwiderstand von Metallständer-Wandkonstruktionen aus. Daher wurde im Rahmen dieser Arbeit der Einfluss von Zusätzen in Gipsplatten bezüglich einer möglichen Verbesserung dieser Eigenschaft untersucht.
Zu diesem Zweck wurden spezielle, den jeweiligen Untersuchungsbedingungen angepasste Probekörper unter Verwendung verschiedenster Zusätze gefertigt. Die Beurteilung deren Auswirkungen erfolgte insbesondere mittels nachfolgender fünf Kriterien:
1) dem Zeitpunkt der Temperaturerhöhung nach der Probekörperentwässerung,
2) dem Maximalwert der Plattenrückseitentemperatur,
3) der Größe und der Anzahl der Risse,
4) der Plattenstabilität nach der Wärmebeanspruchung,
5) der Verkürzung von prismatischen Probekörpern.
Besonders wichtig war hierbei die Charakterisierung der Auswirkungen einer simulierten Brandbeanspruchung von 970 °C über 90 Minuten auf Labor-Gipsplatten. Dabei wurde die Temperaturänderung auf der Plattenrückseite über den gesamten Prüfzeitraum kontinuierlich erfasst. Die Bewertung des Zusammenhalts der Platten nach der thermischen Beanspruchung erfolgte erstmals quantitativ über Anzahl und Größe der an den Proben entstandenen Risse. Ursächlich für die Rissbildung ist die Verringerung des Probekörpervolumens infolge des ausgetriebenen Kristallwassers. Da dieser Parameter im Plattenversuch nicht bestimmt werden kann, wurde ergänzend das Längenänderungsverhalten von Prismen im Ergebnis einer 90minütigen Temperung bei 1000 °C im Muffelofen ermittelt.
Besonders vorteilhaft hat sich die Zugabe von 80 g/m2 Glasfasern und 7,75 % Kalksteinmehl auf das Verhalten von Gipsplatten bei Brandbeanspruchung ausgewirkt. Diese Verbesserung ist insbesondere auf höhere Stabilität und geringere Schrumpfung der Gipsplatte zurückzuführen.
Basierend auf den im Labormaßstab erhaltenen Ergebnissen wurden Rezepturvorschläge zur Verbesserung des Feuerwiderstandsverhaltens von Gipsplatten unter Praxisbedingungen entwickelt. Die Herstellung der erforderlichen großformatigen Platten erfolgte auf der Bandstraße der Knauf Gips KG. Diese Platten wurden als Wandkonstruktion mit zweilagiger Beplankung einer großtechnischen Prüfung erfolgreich unterzogen. Eine geringere Durchbiegung der Wandkonstruktion, eine verminderte Volumenreduzierung der Platten sowie eine erhöhte Plattenstabilität belegen die verbesserten Eigenschaften dieser modifizierten Feuerschutzplatte.
Weitere durchgeführte Untersuchungen ergaben, dass es unerheblich ist, ob die Platten auf Basis von Natur- oder REA-Gips bzw. mit hohem oder niedrigem Flächengewicht gefertigt wurden. Das eindeutig beste Ergebnis mit einer Feuerwiderstandsdauer von 118 Minuten hat eine Wandkonstruktion aus Feuerschutzplatten auf Basis eines Stuckgipses aus 100 % REA-Gips mit einem Anteil von 83,9 g/m2 Glasfasern und 1 % Vermiculit und einem Flächengewicht von 10,77 kg/m2, bei einer Plattenstärke von 12,5 mm.
Die als Ziel vorgebende Feuerwiderstandsdauer von 120 Minuten bei zweilagiger Beplankung ohne Dämmstoff könnte künftig erreicht werden, wenn es gelingt, die Volumenreduzierung noch besser zu kompensieren und die Plattenstabilität zu steigern. Eine Möglichkeit hierzu ist die Substitution der beidseitigen Kartonlagen durch eine Glasfaser-Vliesummantelung. Die Wandkonstruktion W112 ohne Dämmstoff erreicht dabei eine Feuerwiderstandsdauer von weit über 120 Minuten, wobei der Gipskern mit Glasfasern armiert ist.
Helsinki Central
(2012)
Als zentraler Ort und Eingangstor in die finnische Hauptstadt bietet der Bereich um den Bahnhof, in dem sich das Baufeld befindet zu wenig räumliche Qualitäten und bildet gleichzeitig eine Barriere zwischen dem historischen Stadtkern und dem politischen und kulturellem Zentrum der Stadt.
Der historische Bahnhof aus der Epoche des Jugendstils ist momentan eingeschlossen von einer hochfrequentierten Straße im Süden und den flankierenden Stationen des Busbahnhofs an der Ost- und Westseite.
Die fußläufigen Verbindungen in die Altstadt sind gestört und das Regierungsviertel mit
dem Reichstagsgebäude werden links liegen gelassen. Eine Orientierung als Neuankömmling ist schwer möglich.
Darüber hinaus kommt etwa die Hälfte der Züge, vor allem die Regionalzüge nicht in der Bahnhofshalle des Kopfbahnhofes an, weil die Begrenzung durch die
Seitenflügel nur eine Erweiterung des Bahnhofs nach Norden hin zuließ.
Entstanden ist ein Entwurf der versucht, dem gesamten Bereich um den Bahnhof ein neues Gesicht zu geben und eine Verbesserung auf unterschiedlichen Ebenen zu erreichen. Er bündelt zum einen die verschiedenen Verkehrsströme und stellt eine bisher unterbrochene Querverbindung zwischen den benachbarten Stadtvierteln entlang des Bahnhofsareals her. Zum anderen trägt er dem Erfordernis nach einem städtebaulichen Gegenüber für das
Regierungsgebäude Rechnung, welches damit in den Verbund der kulturellen Einrichtungen auf dem Töölönlahti Gelände aufgenommen wird. Darüber hinaus belebt er eine Besonderheit von Helsinki. Zu Beginn des 20. Jahrhunderts bestand die Notwendigkeit den Hafen an das Schienennetz anzubinden. Da der Stadtkern bereits sehr dicht bebaut war, wurde ein Eisenbahnring entlang der Küste, einmal um das Stadtzentrum herum gebaut. Seitdem die Verbindung stillgelegt wurde liegt dieser Ring brach, was nun die große Chance bietet, eine kreuzungsfreien Rad- und Fußweg zu etablieren, der durch den Entwurf eines Mobilityhubs geschlossen würde.
In der vorliegenden Broschüre werden die städtebaulichen Rahmenbedingungen, die Analyse der gegenwärtigen Situation und der eigentliche Entwurfsprozess, der zu dieser Lösung führte dokumentiert.
Bentonite sind quellfähige Tone, die häufig in der Umwelttechnik (in Abdichtungsbauwerken oder in der Bodensanierung) eingesetzt werden. Ziel der Arbeit war die Klärung, wie eine unterschiedliche Kationenbelegung mit Cu2+ und NH4+ die Eigenschaften der Bentonite bei Raumtemperatur und nach moderater Wärmebehandlung (300 – 450°C) beeinflusst. Im Blickpunkt stand insbesondere die gleichzeitige Präsenz von Kupfer- und Ammoniumionen, die als Vertreter für häufig auftretende Inhaltsstoffe von Wässern in der Umgebung von technischen Bentoniten ausgewählt wurden.
Die Untersuchungen zur Cu2+-Sorption bei Raumtemperatur und nach moderater Wärmebehandlung (300 – 450°C) erfolgten an Pulverproben von zwei technischen Bentoniten, die sich in der ursprünglichen Kationenbelegung, Art und Anteil an Nebengemengteilen, sowie der Schichtladungsverteilung in den Montmorilloniten unterscheiden. Vor der Wärmebehandlung wurden die Bentonite durch Kontakt mit verschieden konzentrierten Kupfer- und Ammoniumlösungen mit unterschiedlichen Gehalten der Kationen Cu2+, NH4+, Na+, Ca2+, Mg2+ belegt.
Der Eintrag von Kupferionen in die Bentonite durch Kationenaustausch bei Raumtemperatur wurde erwartungsgemäß durch präsente Nebengemengteile (wie Carbonat) beeinflusst, so dass die Kupferionen zusätzlich spezifisch adsorbiert und in festen Phasen angereichert wurden.
Die Cu2+-Fixierung infolge der Wärmebehandlung wurde vom Cu2+-Totalgehalt in den Bentoniten, der Präsenz von Nebengemengteilen und die Schichtladungsverteilung in den Montmorilloniten beeinflusst. Es waren generell Behandlungstemperaturen von > 400°C erforderlich, um Cu2+-Fixierungsraten von > 95% zu erzielen.
Waren während der Wärmebehandlung neben Cu2+-Ionen gleichzeitig NH4+-Ionen in den Bentoniten präsent, konnte die Cu2+-Fixierungstemperatur herabgesetzt werden. Die Deammonisierung (NH4+ --> NH3 + H+) der NH4+-belegten Bentonite fand größtenteils unterhalb der Dehydroxylierungstemperatur der Bentonite statt.
Durch Untersuchungen (XRD, FTIR, NMR, ESR) zum Mechanismus der Cu2+-Einbindung in die Bentonite an speziell aufbereiteten Proben (carbonatfrei, < 2 µm) konnte nachgewiesen werden, dass in den Cu2+-belegten Montmorilloniten die Cu2+-Ionen infolge der Wärmebehandlung nicht bis in die Oktaederschicht der Tonminerale vordringen, sondern nur bis in die Tetraederschicht wandern. In den NH4+-belegten Montmorilloniten treten im Zusammenhang mit der Deammonisierung keine zusätzlichen Strukturänderungen (wie Auflösung der Oktaederschicht) infolge der Wärmebehandlung auf.
Der Einsatz ungeeigneter Materialien ist eine der häufigsten Ursachen für Bauwerksschäden. Da die Beseitigung dieser Schäden oft mit hohen Kosten verbunden ist, besteht in der Baupraxis der Bedarf an einer Identifizierungsmethode für eingesetzte Baustoffe. Daneben wäre eine Kenntnis der in einem Bauwerk vorliegenden Materialien auch für Instandhaltungsarbeiten hilfreich.
Die Identifizierung der in einem Festbeton oder Festmörtel vorliegenden Zementart gilt auch gegenwärtig noch als schwierig oder sogar unmöglich. Die Schwierigkeiten ergeben sich in erste Linie daraus, dass die Hydratationsprodukte verschiedener Zementarten oft nur geringe Unterschiede in ihrer chemischen und mineralogischen Zusammensetzung aufweisen und die Hydratationsmechanismen bei einigen Zementarten noch nicht vollständig erforscht sind.
Primäres Ziel der vorliegenden Arbeit war es zu untersuchen, ob anhand des Mineralphasenbestandes, der sich während einer thermischen Behandlung von Zementsteinen einstellt, eine Identifizierung der vorliegenden Zementart möglich ist. Weiterhin sollte die Übertragbarkeit dieser Ergebnisse auf Betone und Mörtel eingeschätzt werden.
Zur Schaffung von Identifizierungsmerkmalen wurden die (angereicherten) Zementsteine bei Temperaturen im Bereich zwischen 600 °C und 1400 °C thermisch behandelt. An den getemperten Proben wurde der Mineralphasenbestand mittels Röntgendiffraktometrie bestimmt. Mit der gleichen Methode wurden die Ausgangszemente und die (angereicherten) Zementsteine untersucht. Aus der Gegenüberstellung der nachgewiesenen Mineralphasen konnten die gesuchten Identifizierungsmerkmale abgeleitet werden. Um den Einfluss der Gesteinskörnungen auf die Identifizierungsmöglichkeiten gesondert zu erfassen, wurde das Versuchsprogramm auf 3 Abstraktionsebenen angelegt. Für die Auswertung der Ergebnisse wurden die Proben zu Klassen zusammengefasst, welche jeweils charakteristische Zusammensetzungen der Ausgangszemente repräsentieren. Für die Analyseergebnisse wurden die klassenspezifischen die Mittel- und Grenzwerte bestimmt.
Als die effektivste Methode zur Anreicherung der Zementsteinmatrix aus Mörtel- und Betonproben erwies sich die Kombination aus einer Zerkleinerung in einem Laborbackenbrecher. Die fein partikulären Fraktionen, welche Zementsteingehalte von 70-80 Ma.-% aufwiesen, wurden als Analyseproben verwendet. Es zeigte sich aber auch, dass das Anreicherungsergebnis von der Gesteinskörnungsart abhängt. Bei Laborbetonen mit einer Kalkstein-Gesteinskörnung wurde mit der gleichen Methode lediglich eine Anreicherung des Zementsteins auf etwa 50 Ma.-% erreicht.
Die Untersuchungen auf Abstraktionsebene 1 lieferten die Erkenntnis, dass der Hydratationsprozess der Klinkerphasen, der Klinkerphasengemische sowie des Hüttensandes, auch in Gegenwart des Sulfatträgers für Behandlungstemperaturen im Bereich des Klinkerbrandes vollständig reversibel ist. Im Hinblick auf die Identifizierungsmöglichkeiten wurde 1100 °C als optimale Behandlungstemperatur ermittelt, da hier eine Schmelzphasenbildung ausgeschlossen werden kann.
Durch eine Gegenüberstellung der chemischen Zusammensetzung der Ausgangszemente und des Phasenbestandes nach der Temperung konnte nachgewiesen werden, dass bei reinen Zementsteinen grundsätzlich alle Bestandteile an der Reaktion, die während der thermischen Behandlung bei 1100 °C stattfindet, beteiligt sind. Der sich einstellende Phasen bestand ist nur von der chemischen Zusammensetzung der Probe und dabei besonders von derem CaO-Gehalt abhängig. Empirisch wurde eine Prioritätenfolge für die Phasenbildung ermittelt. Daraus geht hervor, dass bevorzugt CaO-reiche Phasen, wie Aluminatferritphase, Belit und Ye‘elimit entstehen und dass überschüssiger Kalk als freies CaO vorliegt. Nur wenn der CaO-Gehalt der Probe nicht für die vollständige Bildung der – in der Summe – kalkreichsten Phasen ausreicht, entstehen partiell oder vollständig kalkärmere Phasen, wie Merwinit und Melilith. Basierend auf den Prioritäten zur Phasenbildung wurde ein Satz von Berechnungsgleichungen aufgestellt, mit denen der CaO-Typ aus der Phasenzusammensetzung der bei 1100 °C getemperten Probe bestimmt werden kann. CaO-Typen repräsentieren Bereiche für die chemische Zusammensetzung der Ausgangsprobe, welche bei der Temperaturbehandlung zu einer charakteristischen qualitativen Phasenzusammensetzung führen. Die CaO-Typen der marktüblichen Zementarten wurden anhand der in der Norm EN 197 festgelegten Bereiche für die Zusammensetzung der Zemente aus ihren Hauptbestandteilen sowie der aus der Fachliteratur ermittelten Bereiche für die chemische Zusammensetzung dieser Hauptbestandteile ermittelt. Damit kann für die Zementarten der Phasenbestand vorhergesagt werden, welcher sich während der Temperaturbehandlung des entsprechenden Zementsteins einstellt. Ein Vergleich mit dem gemessenen Phasenbestand erlaubt so die Identifizierung der Zementart.
Die Übertragbarkeit der durch die Untersuchungen an den Zementsteinen gewonnenen Erkenntnisse und die daraus abgeleiteten Identifizierungsmöglichkeiten auf Zementsteine, welche aus quarzsandhaltigen Normmörteln angereichert wurden, konnte nachgewiesen werden. Dabei wurde eine leichte Verschiebung des Phasenbestandes hin zu kalkärmeren Phasen beobachtet, welche auf die Reaktionsbeteiligung eines Teils der in den Proben enthaltenen Restgesteinskörnung zurückzuführen ist. Die Unterscheidungsmöglichkeiten zwischen den Zementarten blieben jedoch überwiegend erhalten.
Bei Betonen nimmt der Einfluss der Gesteinskörnung auf den Phasenbestand deutlich zu und kann zum Teil nicht mehr vernachlässigt werden. Die Identifizierungsmöglichkeiten müssen deshalb nach der chemischen Zusammensetzung und der Reaktivität der Gesteinskörnung differenziert ermittelt werden. Dazu sind weitere Untersuchungen notwendig.
Für Zementsteine, zementsteinreiche Systeme sowie Mörtel und Betone mit wenig reaktiven Gesteinskörnungen kann die Zementart bereits mit der in dieser Arbeit vorgestellten Methode identifiziert werden. In Fällen, für die sich die Bereiche der chemischen Zusammensetzung mehrerer Zementarten überschneiden, kann es dabei notwendig sein, zusätzliche chemische bzw. mineralogische Untersuchungen durchzuführen, z. B. am unbehandelten Zementstein.
Der Komplexität einer großen Baumaßnahme steht meist ein relativ unpräzises Termincontrolling gegenüber. Die Gründe dafür liegen in unzureichenden Baufortschrittsinformationen und der Schwierigkeit, eine geeignete Steuerungsmaßnahme auszuwählen. In der Folge kommt es häufig zu Terminverzügen und Mehrkosten.
Ziel der Arbeit war es, die realen Bau-Ist-Zustände eines Bauprojektes so genau zu erfassen, dass es möglich wird, täglich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes zu schaffen und mit Hilfe eines Simulationswerkzeuges nachzubilden. Zu diesem Zweck sollte ein Erfassungskonzept ausgearbeitet werden, mit dessen Hilfe unter Verwendung von Erfassungstechniken aussagekräftige sowie belastbare Daten zu einer auf die Anforderungen der Simulation abgestimmten Datenbasis zusammengeführt werden.
Um der Zielstellung gerecht zu werden, wurde anhand eines Beispiels ein Prozessmodell aufgebaut und definiert, welche Informationen zum Aufbau eines Simulationsmodells, das die reaktive Ablaufplanung unterstützt, erfasst werden müssen. Die einzelnen Prozessgrößen wurden detailliert beschrieben und die Erfassungsgrößen daraus abgeleitet. Weiterhin wurden Aussagen zur Prozessstrukturierung erarbeitet. Somit wurden Informationsstützstellen definiert.
Es wurden Methoden zur Erfassung des Bau-Ist-Zustandes hinsichtlich ihrer Eignung sowie Anwendungsmöglichkeiten analysiert und ausgewählte Anwendungsbeispiele für RFID, Barcodes und Bautagebücher dargestellt. Außerdem wurde betrachtet, welche Daten der baustelleneigenen Bauablaufdokumentation zur Belegung der Informationsstützstellen genutzt werden können. Diese Betrachtung stellte Dokumente in den Fokus, welche aufgrund von Vorschriften oder Vertragsbedingungen ohnehin auf Baustellen erfasst werden müssen.
Schließlich wurden die vorangegangenen Betrachtungen hinsichtlich der Erfassungsgrößen und der Erfassungsmethoden in einem Erfassungskonzept zusammengeführt und eine geeignete Kombination von Erfassungsmethoden entwickelt.
Der Baufortschritt soll anhand der Beschreibung, welchen Status die einzelnen Vorgänge angenommen haben, mit Hilfe eines digitalen Bautagebuchs erfasst werden. Die Randbedingungen, wie die Verfügbarkeit von Personal-, Material- und Geräteressourcen, werden mit Hilfe von RFID-Tags identifiziert, auf denen alle weiteren benötigten Informationen hinterlegt sind. Informationen über Ressourcen, welche geplante Termine wiedergeben, müssen ebenfalls im digitalen Bautagebuch hinterlegt und aktuell gehalten werden. Traditionelle Lieferscheine in Papierform müssen durch digitale Lieferscheine ersetzt werden.
Abgeschlossen wurde die Ausarbeitung des Erfassungskonzeptes durch Ansätze, mit deren Hilfe der Erfassungsaufwand reduziert werden kann. Zu diesem Zweck wurde eine hierarchische Ordnung des Erfassungskonzeptes eingeführt.
Im Ergebnis ist somit ein Erfassungskonzept entstanden, mit dessen Hilfe die realen Bau-Ist-Zustände einer Baumaßnahme so genau erfasst werden können, dass täglich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes in einer Simulations¬umgebung generiert werden kann. Die Erfassungskonzeption liefert eine Datenbasis, die auf die Anforderungen der Simulation abgestimmt ist.
This thesis presents two new methods in finite elements and isogeometric analysis for structural analysis. The first method proposes an alternative alpha finite element method using triangular elements. In this method, the piecewise constant strain field of linear triangular finite element method models is enhanced by additional strain terms with an adjustable parameter a, which results in an effectively softer stiffness formulation compared to a linear triangular element. In order to avoid the transverse shear locking of Reissner-Mindlin plates analysis the alpha finite element method is coupled with a discrete shear gap technique for triangular elements to significantly improve the accuracy of the standard triangular finite elements.
The basic idea behind this element formulation is to approximate displacements and rotations as in the standard finite element method, but to construct the bending, geometrical and shear strains using node-based smoothing domains. Several numerical examples are presented and show that the alpha FEM gives a good agreement compared to several other methods in the literature.
Second method, isogeometric analysis based on rational splines over hierarchical T-meshes (RHT-splines) is proposed. The RHT-splines are a generalization of Non-Uniform Rational B-splines (NURBS) over hierarchical T-meshes, which is a piecewise bicubic polynomial over a hierarchical
T-mesh. The RHT-splines basis functions not only inherit all the properties of NURBS such as non-negativity, local support and partition of unity but also more importantly as the capability of joining geometric objects without gaps, preserving higher order continuity everywhere and allow local refinement and adaptivity. In order to drive the adaptive refinement, an efficient recovery-based error estimator is employed. For this problem an imaginary surface is defined. The imaginary surface is basically constructed by RHT-splines basis functions which is used for approximation and interpolation functions as well as the construction of the recovered stress components. Numerical investigations prove that the proposed method is capable to obtain results with higher accuracy and convergence rate than NURBS results.
Development of a Sustainability-based Sanitation Planning Tool (SusTA) for Developing Countries
(2014)
Background and Research Goal
Despite all the efforts in the sanitation sector, it is acknowledged that the world is not on track to meet the MDG sanitation target to reduce the number of people without access to sanitation by 2015. Furthermore, a large number of existing sanitation facilities in developing countries is out of order. This leads to the conclusion that, besides technical failures, the planning process in the sanitation sector was ineffective. This ineffectiveness may be attributed to the lack of knowledge of the sanitation planners about the local conditions of the sanitation project. In addition, sustainability of a technology is often approached from a fragmented perspective that often leads to an unsustainable solution.
The dissertation is conducted within the framework of the Integrated Water Resources Management (IWRM) Indonesia project. The goal of this work is to contribute to the development of a methodology of a planning tool for sustainable sanitation technology. The tool is designed for sanitation planners in developing countries, where a top-down planning approach is common practice. The proposed tool enables comprehensive sustainability assessments (using the Helmholtz Concept of Sustainability as reference), taking into account local conditions.
State of the Science
In the planning practice, many sanitation planning tools focus on technology selection. However, it has become evident that the selection criteria for sustainable technologies are not always considered in the tools’ framework. In other cases, when the criteria are provided by the tool, there is no clear indication of the conditions to be fulfilled in order to meet these criteria. Specifically, there is no reference to what is meant by sustainable technology in a particular context and how to comprehensively assess the sustainability of different technology options.
Research Methodology
Developing a planning tool is an empirical process, combining theory and practical experience. Hence, the development process of such a tool requires extensive observations, particularly on the interaction between stakeholders in the sanitation sector as well as between technology and its environment. For this purpose, a case study within the project area was carried out. Pucanganom, a village representing common strategic problems in developing countries (e.g. top-down planning approaches, lack of involvement of beneficiaries in the planning process, lack of sustainability assessments) was finally selected as the case study area. After the in-depth case study, an analytical generalisation was developed to enable the tool’s application to a broader context.
Results
The result of this research is a new tool – the Sustainability-based Sanitation Planning Tool (SusTA). SusTA enables comprehensive sustainability assessment in its five generic steps, namely: (1) analysis of stakeholders and sanitation policy in the region, (2) distance-to-target analysis on sanitation conditions in the region, (3) examination of physical and socio-economic conditions in the project area, (4) contextualisation of the technology assessment process in the project area, and (5) sustainability-oriented technology assessment at the project level. These steps are conducted at two levels of planning – the region and the project area – in order to identify the specific problems and interests which influence the selection of a sanitation system. Each planning step is equipped with tool elements (e.g. set of indicators, household questionnaires, technology assessment matrices) to support the analysis.
From the development of SusTA, it can be concluded that four elements are required for an effective and widely applicable sanitation planning tool: sustainability concept, participatory approach, contextualisation framework and modification framework. SusTA provides both a theoretical and a practical basis for assessing the sustainability of sanitation technologies in developing countries. The tool’s main advantages for decision makers in these countries are: It is simple and transparent in its steps, does not require vast amounts of data and does not need a sophisticated computer program.
The increasing success of BIM (Building Information Model) and the emergence of its implementation in 3D construction models have paved a way for improving scheduling process. The recent research on application of BIM in scheduling has focused on quantity take-off, duration estimation for individual trades, schedule visualization, and clash detection.
Several experiments indicated that the lack of detailed planning causes about 30% non-productive time and stacking of trades. However, detailed planning still has not been implemented in practice despite receiving a lot of interest from researchers. The reason is associated with the huge amount and complexity of input data. In order to create a detailed planning, it is time consuming to manually decompose activities, collect and calculate the detailed information in relevant. Moreover, the coordination of detailed activities requires much effort for dealing with their complex constraints.
This dissertation aims to support the generation of detailed schedules from a rough schedule. It proposes a model for automated detailing of 4D schedules by integrating BIM, simulation and Pareto-based optimization.
Die Entwicklung von Hybridtechnologien führt zu vielen neuartigen und effizienten Anwen-dungen. Hybridtechnologien kommen immer dann zum Einsatz, wenn die ausschließliche Nutzung einer Technologie oder eines Werkstoffs nicht zum gewünschten Ergebnis führt. Dann kann durch Kombination unterschiedlicher Werkstoffe oder Technologien ein System geschaffen werden, das in seiner Konfiguration ein Optimum an Eigenschaften darstellt.
Im Bauwesen geht die Entwicklung schon seit jeher in Richtung von immer schlankeren ar-chitektonisch ansprechenden Konstruktionen. In der gegenwärtigen Entwicklung ermöglichen hochtechnologische Kunststoffe und Faserwerkstoffe, wie z. B. Kohlenstofffasern, sehr schlanke, leichte und dennoch hochtragfähiger Konstruktionen. Der wirtschaftliche Aspekt bei der Entwicklung von Tragsystemen bzw. -strukturen erfordert dabei in fast allen Fällen eine kostengünstig effiziente Ausbildung und die Optimierung von Trageigenschaften und Kostenfaktoren. Daher besteht oft die Anforderung nach einem Verbundsystem, bei dem unterschiedliche Materialien in der Art miteinander kombiniert werden, dass jeder Werkstoff für eine bestimmte Beanspruchung angeordnet wird und sein Tragfähigkeitspotenzial optimal ausschöpft. Im Rahmen dieser Arbeit werden an konkreten Beispielen Möglichkeiten aufge-zeigt, Hochtechnologiewerkstoffe in effizienter Art und Weise zu nutzen.
Der Kunststoff-Faser-Verbundwerkstoff stellt eine Möglichkeit dar, den als solches nur für dünnschichtige Klebverbindungen nutzbaren Klebstoff in seinen Anwendungsmöglichkeiten zu erweitern. Die Fasern wirken dabei dem mechanischen Schwachpunkt des Klebstoffs, einer nur geringen Zugfestigkeit, effektiv entgegen. Mit faserverstärkten Klebstoff können Anwendungen realisiert werden, bei denen der Klebstoff auch zur Zugkraftübertragung ge-nutzt wird. Zusätzlich bieten Füllstoffe eine Möglichkeit, die Steifigkeit des Klebstoffs zu stei-gern, was für viele mechanischen Beanspruchungen Vorteile mit sich bringt. Die Kombination aus einem partikelgefüllten und zusätzlich faserverstärkten Klebstoff führt zu einem Ver-bundwerkstoff, der für viele unterschiedliche Anwendungen geeignet ist. Praktische Anwen-dungsmöglichkeiten finden sich in der Herstellung von Fassadenelementen, wo der faserver-stärkte Klebstoff zur Verbindung von Aluminiumhohlprofilen verwendet wird. Weitere Anwen-dungsgebiete erstrecken sich auf die Zugkraftbewehrung von Betontragelementen, bei denen der faserverstärkte Klebstoff die Rolle einer Zugbewehrung an der Betonoberfläche übernimmt.
Alu-CFK-Hybridelemente ermöglichen die Herstellung sehr effizienter Tragsysteme, bei de-nen Gewichtsreduzierung der Tragstruktur und Kosteneinsparungen im Betrieb des Bauwerks gleichermaßen ermöglicht werden. Die CFK-Lamellen werden dabei in den am stärksten längskraftbeanspruchten Bereichen eines Aluminiumtragelementes angeordnet, wodurch sich die Biegetragfähigkeit des dann hybriden Tragelements signifikant erhöht. In der Folge können Gewichtsreduzierungen, verglichen mit herkömmlichen Aluminiumtragelementen, erzielt werden. Weiterhin können die Querschnittsaußenmaße bei Alu-CFK-Hybridelementen deutlich reduziert werden. In der Folge vereinfachen sich der Transport und die Montage dieser Art Tragwerke, was besonders bei fliegenden Bauten einen wesentlichen Vorteil dar-stellt.
Der Einsatz von Glas-Kunststoff-Hybridelementen ermöglicht die Konstruktion transparenter Tragstrukturen in einer optisch einzigartigen Qualität. Die Konstruktion eines Glas-Kunststoff-Hybridelementes ermöglicht ein redundant wirkendes Tragverhalten, bei dem die Steifigkeit und optische Qualität des Glases optimal im Tragsystem genutzt werden können. Der Kunst-stoff stellt eine Art Sicherheitselement dar und übernimmt im Falle eines Glasbruchs die Tragwirkung des Glases. Die Eigenschaft der Vorankündigung eines Systemversagens stellt die Grundlage für eine baupraktische Anwendung des Glas-Kunststoff-Hybridelementes als statisches Tragsystem dar. Durch die Redundanz des Tragverhaltens von Glas-Kunststoff-Hybridelementen ist das Versagen dieser Tragstruktur durch optische oder strukturelle An-zeichen erkennbar und eine Bemessung somit möglich.
Für die mechanische Analyse grundlegender Zusammenhänge in Hybridsystemen können ingenieurmäßige, analytische und numerische Betrachtungen durchgeführt werden. Die in-genieurmäßigen Betrachtungen sind sehr gut geeignet, um Abschätzungen zu treffen, die in später durchgeführten experimentellen Bauteiluntersuchungen oft auch ihre Bestätigung fan-den. Bei Detailbetrachtungen, wie z. B. der Analyse eines nichtlinearen Spannungsverlaufes in mechanisch beanspruchten Klebfugen, bietet eine numerische Betrachtung mittels FEM Vorteile, da sie eine sehr detaillierte Auswertung in Bereichen mit hohen Spannungsgradien-ten ermöglicht. Durch die Anwendung der FEM ist es möglich, Strukturen in unterschiedlichen Skalierungsbereichen zu analysieren und dabei auch Bereiche einzubeziehen, die für experimentelle Untersuchungen nur sehr schwer zugänglich sind. Genaue Kenntnisse über das Materialverhalten der zu analysierenden Stoffe stellen dabei eine wesentliche Grundlage für die Erstellung qualitativ hochwertiger Rechenmodelle dar.
The focus of the thesis is to process measurements acquired from a continuous
monitoring system at a railway bridge. Temperature, strain and ambient vibration
records are analysed and two main directions of investigation are pursued.
The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is
studied and correlated to environmental and operational factors.
The second aspect deals with the structural response to passing trains. Corresponding
triggered records of strain and temperature are processed and their assessment is
accomplished using the average strains induced by each train as the reference parameter.
Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out.
Baulogistische Vorgänge sind in einer modern angelegten Baustelle der Schlüssel zu einer wirtschaftlichen Abwicklung. Dieses gilt nicht nur für den Rohbau, bei dem die sehr enge Verzahnung zwischen den Fertigungs- und Logistikprozessen auf der Baustelle zu beobachten ist, sondern noch mehr für die Ausbauphase, bei der vermeintlich unabhängig voneinander agierende Einzelunternehmen des Ausbaus auf engem Raum miteinander um die jeweils besten Liefer- und Montagebedingungen konkurrieren.
Ausgehend von einer aktuellen Großbaustelle in Jena werden verschiedene Varianten einer leistungsfähigen Baulogistik entwickelt und deren Implementierung auf der Baustelle vorbereitet werden.
Generell hat sich im Forschungsprojekt insbesondere durch die Gespräche mit den Hochschulvertretern bestätigt, dass für qualitativ hochwertige Lehre und Forschung qualitativ hochwertige Flächen in ausreichendem Umfang notwendig sind.
Ein Ziel der Forschungsarbeit ist die Entwicklung von Modellen zur Allokation und Steuerung von Flächenressourcen in Hochschulen. Ausgehend von Darstellungen und Erfahrungen für die Flächensteuerung aus Unternehmen, anderen Bereichen der öffentlichen Verwaltung und Forschungseinrichtungen wurden mögliche Steuerungsverfahren für Hochschulen untersucht. Es wurde ein Steuerungsmodell für Hochschulen entwickelt, das auf die hochschulinternen und die extern wirksamen Rahmenbedingungen reagiert.
Die hochschulinterne Flächenallokation wird zum einen maßgeblich von externen Rahmen-bedingungen und zum zweiten von internen Prozessen, Abläufen und Strukturen beeinflusst. Die Kenntnis dieser Bedingungen wird als Voraussetzung für die Benennung von Erfolgsfak-toren für die Implementation neuer Steuerungsmodelle angenommen. Analysiert wurden daher die liegenschaftspolitischen und die organisatorischen Rahmenbedingungen sowie die steuerungsrelevanten Eigenschaften der Flächen selber.
Aerodynamic Analysis of Slender Vertical Structure and Response Control with Tuned Mass Damper
(2015)
Analysis of vortex induced vibration has gained more interest in practical held of civil engineering. The phenomenon often occurs in long and slender vertical structure like high rise building, tower, chimney or bridge pylon, which resulting in unfavorable responses and might lead to the collapse of the structures. The phenomenon appears when frequency of vortex shedding produced in the wake area of body meet the natural frequency of the structure. Even though this phenomenon does not necessarily generate a divergent amplitude response, the structure still may fail due to fatigue damage.
To reduce the effect of vortex induced vibration, engineers widely use passive vibration response control system. In this case, the thesis studies the effect of tuned mass damper. The objective of this thesis is to simulate the effect of tuned mass damper in reducing unfavorable responses due to vortex induced vibration and initiated by numerical model validation with respect to wind tunnel test report. The reference structure that being used inside the thesis is Stonecutter Bridge, Hongkong.
A numerical solver for computational uid dynamics named VX ow which developed by Morgenthal [6] is utilized for wind and structure simulation. The comparison between numerical model and wind tunnel result shows 10% maximum tip displacement diference in the model of full erection freestanding tower. The tuned mass damper (TMD) model itself built separately in finite element software SOFiSTiK, and the efective damping obtained from this model then applied inside input modal data of VX ow simulation. A single TMD with mass ratio of TMD 0.5% to the mass of first bending frequency, the maximum tip displacement is measured to be average 67% reduced.
Considering construction limitation and robustness of TMD, the effects of multiple TMD inside a structure are also studied. An uncoupled procedure of applying aeroelastic loads obtained from VX
ow inside finite element software SOFiSTiK is also done to observe the optimum distribution and optimum mass ratio of multiple tuned mass damper. The rest of the properties of TMD are calculated with Den Hartog's formula. The results are as follows: peak displacement in the case of multiple TMD that distributed with polynomial spacing achieve 7.8% more reduction performance than
the one that distributed with equal spacing. Optimum mass of tuned mass damper achieved with ratio 1.25% mass of first bending frequency corresponds to across wind direction.
Piezoelectric materials are used in several applications as sensors and actuators where they experience high stress and electric field concentrations as a result of which they may fail due to fracture. Though there are many analytical and experimental works on piezoelectric fracture mechanics. There are very few studies about damage detection, which is an interesting way to prevent the failure of these ceramics.
An iterative method to treat the inverse problem of detecting cracks and voids in piezoelectric structures is proposed. Extended finite element method (XFEM) is employed for solving the inverse problem as it allows the use of a single regular mesh for large number of iterations with different flaw geometries.
Firstly, minimization of cost function is performed by Multilevel Coordinate Search (MCS) method. The XFEM-MCS methodology is applied to two dimensional electromechanical problems where flaws considered are straight cracks and elliptical voids. Then a numerical method based on combination of classical shape derivative and level set method for front propagation used in structural optimization is utilized to minimize the cost function. The results obtained show that the XFEM-level set methodology is effectively able to determine the number of voids in a piezoelectric structure and its corresponding locations.
The XFEM-level set methodology is improved to solve the inverse problem of detecting inclusion interfaces in a piezoelectric structure. The material interfaces are implicitly represented by level sets which are identified by applying regularisation using total variation penalty terms. The formulation is presented for three dimensional structures and inclusions made of different materials are detected by using multiple level sets. The results obtained prove that the iterative procedure proposed can determine the location and approximate shape of material subdomains in the presence of higher noise levels.
Piezoelectric nanostructures exhibit size dependent properties because of surface elasticity and surface piezoelectricity. Initially a study to understand the influence of surface elasticity on optimization of nano elastic beams is performed. The boundary of the nano structure is implicitly represented by a level set function, which is considered as the design variable in the optimization process. Two objective functions, minimizing the total potential energy of a nanostructure subjected to a material volume constraint and minimizing the least square error compared to a target
displacement, are chosen for the numerical examples. The numerical examples demonstrate the importance of size and aspect ratio in determining how surface effects impact the optimized topology of nanobeams.
Finally a conventional cantilever energy harvester with a piezoelectric nano layer is analysed. The presence of surface piezoelectricity in nano beams and nano plates leads to increase in electromechanical coupling coefficient. Topology optimization of these piezoelectric structures in an energy harvesting device to further increase energy conversion using appropriately modified XFEM-level set algorithm is performed .
Briefly, the two basic questions that this research is supposed to answer are:
1. Howmuch fiber is needed and how fibers should be distributed through a fiber reinforced composite (FRC) structure in order to obtain the optimal and reliable structural response?
2. How do uncertainties influence the optimization results and reliability of the structure?
Giving answer to the above questions a double stage sequential optimization algorithm for finding the optimal content of short fiber reinforcements and their distribution in the composite structure, considering uncertain design parameters, is presented. In the first stage, the optimal amount of short fibers in a FRC structure with uniformly distributed fibers is conducted in the framework of a Reliability Based Design Optimization (RBDO) problem. Presented model considers material, structural and modeling uncertainties. In the second stage, the fiber distribution optimization (with the aim to further increase in structural reliability) is performed by defining a fiber distribution function through a Non-Uniform Rational BSpline (NURBS) surface. The advantages of using the NURBS surface as a fiber distribution function include: using the same data set for the optimization and analysis; high convergence rate due to the smoothness of the NURBS; mesh independency of the optimal layout; no need for any post processing technique and its non-heuristic nature. The output of stage 1 (the optimal fiber content for homogeneously distributed fibers) is considered as the input of stage 2. The output of stage 2 is the Reliability Index (b ) of the structure with the optimal fiber content and distribution.
First order reliability method (in order to approximate the limit state function) as well as different material models including Rule of Mixtures, Mori-Tanaka, energy-based approach and stochastic multi-scales are implemented in different examples. The proposed combined model is able to capture the role of available uncertainties in FRC structures through a computationally efficient algorithm using all sequential, NURBS and sensitivity based techniques. The methodology is successfully implemented for interfacial shear stress optimization in sandwich beams and also for optimization of the internal cooling channels in a ceramic matrix composite.
Finally, after some changes and modifications by combining Isogeometric Analysis, level set and point wise density mapping techniques, the computational framework is extended for topology optimization of piezoelectric / flexoelectric materials.
Die vorliegende Arbeit beschäftigt sich mit dem Thema Stadthotels in Deutschland zwischen Energieeffizienz und Wirtschaftlichkeit - Studie auf Grundlagen der EnEV-Anforderungen. Die Arbeit setzt sich mit einer qualitativen und quantitativen Analyse über die Energieeffizienz auf Grundlagen der EnEV-Anforderungen und deren Wirtschaftlichkeit bei Stadthotels in Deutschland auseinander. Die Analyse wurde anhand von verschiedenen Untersuchungen bei Hotels aufgebaut. Diese umfassen empirische, energetische und wirtschaftliche Untersuchungen. Die durchgeführten Untersuchungen kommen schließlich zu eindeutigen Ergebnissen auf verschiedenen Ebenen. Im Ergebnis wird deutlich, dass die Optimierung der Gebäudetechnik sowie auch die Verbesserung der energetischen Qualität der Gebäudehülle der Hotels bedeutende Einflussfaktoren zur Steigerung der Energieeffizienz darstellen. Dabei ist jedoch festzuhalten, dass sich die Optimierung der Gebäudetechnik der Hotels insbesondere im Bereich der Lüftungs- und Klimatechnik als besonders wirksam erwiesen hat. Die Effektivität dieser Maßnahmen konnte sowohl in Hinsicht auf die Steigerung der Energieeffizienz als auch in Bezug auf die Wirtschaftlichkeit bewiesen werden.
Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder.
Durch Reifungs- und Strukturbildungsprozesse kann es bei silikatischen und alumosilikatischen Bindern zu Rissbildung bei behinderter Verformung, Festigkeitsverlust und somit Verlust der Dauerhaftigkeit kommen. Die Bewertung dieser Prozesse erfolgt an silikatischen Materialien mit einem Ausblick auf die alumosilikatischen Binder
The construction and operation of a sanitary landfill (SLF) in the Philippines presents concerns on the regulation of the activities of the informal sector in the area. In anticipation of these directives, an association of informal waste reclaimers group called Uswag Calajunan Livelihood Association, Inc. (UCLA) was formed in May 2009. One option identified was the waste-to-energy activity through the production of fuel briquettes. With the availability of raw materials in the area, what was lacking then was an appropriate technology that would cater to their needs. This study, therefore, presented the case of UCLA on how socio-economic and technical aspects was integrated for the development and improvement of a briquetting technology needed in the production of quality briquettes as part of their income generating activities. A non-experimental posttest only design was utilized for the collection of descriptive information. Descriptions and discussions were also made on the enhancement of the briquetting machine from the first hand-press molder developed until the finalized design was attained.
Results revealed that the improved briquetting technology withstood the wear and tear of operation showing a significant (P<0.01) increase on the production rate (220 pcs/hr; 4 kg/hr) and bulk density (444.83 kg/m3) of briquettes produced. The quality of cylindrical briquettes produced in terms of bulk density, heating value (15.13 MJ/kg), moisture (6.2%), N and S closely met or has met the requirements of DIN 51731. Based on the operating expenses, the briquettes may be marked-up to Php0.25/pc (USD0.006) or Php15.00/kg (USD0.34) for profit generation. The potential daily earnings of Php130.00 (USD2.95) to Php288.56 (USD6.56) generated in producing briquettes are higher when compared to the majority of waste reclaimers’ daily income of Php124.00 (USD2.82). The high positive response (93%) on the usability of briquettes and the willingness of the respondents (81%) to buy them when sold in the market indicates its promising potential as fuel in the nearby communities. Results of briquette production citing the case of UCLA could be considered as potential source of income given the social, technical, economic and environmental feasibility of the experiment. This method of utilizing wastes in an urban setting of a developing country with similar socio-economic and physical set-ups may also be recommended for testing or replication.
In contemporary society, data representation is an important and essential part of many aspects of our daily lives. This thesis aims to contribute to our understanding on how people experience data and what role representational modality plays in the process of perception and interpretation. This research is grounded in phenomenology - I align my theoretical exploration to ideas and concepts from philosophical phenomenology, while also respecting the essence of a phenomenological approach in the choice and application of methods. Alongside offering a rich description of people’s experience of data representation, the key contributions I claim transcend four areas: theory, methods, design, and empirical findings. From a theoretical perspective, besides describing a phenomenology of human-data relations, I define, for the first time, multisensory data representation and establish a design space for the study of this class of representation. In relation to methodologies, I describe and deploy two methods to investigate different aspects of data experience. I blend the Repertory Grid technique with a focus group session and show how this adaption can be used to elicit rich design relevant insight. I also introduce the Elicitation Interview technique as a method for gathering detailed and precise accounts of human experience. Furthermore, I describe for the first time, how this technique can be used to elicit accounts of experience with data. My contribution to design relates to the creation of a series of bespoke data-driven artefacts, as well as describing an approach to design that I call Design Probes, which allows researchers to focus their enquiry on specific design features. To answer the research questions I set out in this thesis, I report on a series of empirical studies that used the aforementioned methods. The findings of these studies show, for instance, how certain representational modalities cause us to have heightened awareness of our body, some are more difficult to interpret than others, some rely heavily on instinct and each of them solicit us to reference external events during the process of interpretation. I conclude that a phenomenology of human-data relations show how representational modality affects the way we experience data, it also shows how this experience unfolds and it offers insight into particular moments such as the formation of meaning.
The world society faces a huge challenge to implement the human right of “access to sanitation”. More and more it is accepted that the conventional approach towards providing sanitation services is not suitable to solve this problem. This dissertation examines the possibility to enhance “access to sanitation” for people who are living in areas with underdeveloped water and wastewater infrastructure systems. The idea hereby is to follow an integrated approach for sanitation, which allows for a mutual completion of existing infrastructure with resource-based sanitation systems.
The notion “integrated sanitation system (iSaS)” is defined in this work and guiding principles for iSaS are formulated. Further on the implementation of iSaS is assessed at the example of a case study in the city of Darkhan in Mongolia. More than half of Mongolia’s population live in settlements where yurts (tents of Nomadic people) are predominant. In these settlements (or “ger areas”) sanitation systems are not existent and the hygienic situation is precarious.
An iSaS has been developed for the ger areas in Darkhan and tested over more than two years. Further on a software-based model has been developed with the goal to describe and assess different variations of the iSaS. The results of the assessment of material-flows, monetary-flows and communication-flows within the iSaS are presented in this dissertation. The iSaS model is adaptable and transferable to the socio-economic conditions in other regions and climate zones.
The aim of my research is to observe the variance of energy efficiency of a typical multi-story office building under the exposure of different climatic conditions. Energy efficiency requirements in building codes or energy standards are among the most important single measures for buildings’ energy efficiency. Therefore, this study can be set up for a better understanding of how energy efficiency of a building changes under the effect of adverse to moderate climatic conditions which possess a mentionable effect on the operation of a building.
This thesis is structured in three balanced and conceptual steps. Following the aim of the project, the virtual building model is to be analyzed under the effect of seven distinct climatic conditions namely work environment of New Delhi, Mumbai, Berlin, Lisbon, Copenhagen, Dubai and Montreal. Firstly, the task is to do a complete literature research based on the scope of similar researches and studying the problems in detail along with the theoritical background all the concepts which are implemented to get the numerical results. This chapter also comprises a detailed study of the climatic conditions of the above-mentioned cities. Different climatic traits like temperature variations, count of heating and cooling degree days, relative humidity, temperature range and comfort zonal charts for the specified cities are studied in detail. This study helps to understand the effect of these adverse to moderate climates on the operation of the building. On the second step, the virtual building model is prepared on a software platform named Revit Structures. This virtual building model is not necessarily a complete building, but it has the relevant functionalities of a real building. We perform the energy analysis and the heating and cooling analysis on this virtual building model to study the operational outcome of the building under different climatic conditions in detail. By the end of these above two tasks, two scenarios are observed. On one hand, we have a literature research and on the other hand we have the numerical results. Therefore, finally we present a comparative scenario based on the energy efficient performances of the building under such variant climatic conditions. This is followed by the prediction of thermal comfort level inside the building and it based on Fanger’s PMV Model. Understanding the literature and the numerical values in detail helps us to predict the index thermal comfort level inside the building.
The conclusion of this master thesis focuses mainly on the scopes of improvement of energy efficiency requirements in energy codes if any, differentiated according to specific locations. The initial aim of my hypothesis which is to study the impacts of climatic variations on the energy efficient performances of a building is fulfilled but as such topics have very deep and broad roots, the scope of further improvements is always predominant.
The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. %, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. %, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6% for ethyl ester and 3.1% for methyl ester, compared with those for the experimental data.
As part of an international research project – funded by the European Union – capillary glasses for facades are being developed exploiting storage energy by means of fluids flowing through the capillaries. To meet highest visual demands, acrylate adhesives and EVA films are tested as possible bonding materials for the glass setup. Especially non-destructive methods (visual analysis, analysis of birefringent properties and computed tomographic data) are applied to evaluate failure patterns as well as the long-term behavior considering climatic influences. The experimental investigations are presented after different loading periods, providing information of failure developments. In addition, detailed information and scientific findings on the application of computed tomographic analyses are presented.
Die Zonenmethode nach Hertz ist ein vereinfachtes Verfahren zur Heißbemessung von Stahlbetonbauteilen. Um eine händische Bemessung zu ermöglichen, werden daher verschiedene Annahmen und Vereinfachungen getroffen. Insbesondere werden die thermischen Dehnungen vernachlässigt und das mechanische Verhalten durch einen verkleinerten Querschnitt mit konstanten Stoffeigenschaften beschrieben.
Ziel der vorliegenden Arbeit ist, dieses vereinfachte Verfahren in ein nichtlineares Verfahren zur Heißbemessung von Stahlbetondruckgliedern bei Brandbeanspruchung durch die Einheits-Temperaturzeitkurve zu überführen. Dazu werden die wesentlichen Annahmen der Zonenmethode überprüft und ein Vorschlag zur Weiterentwicklung vorgestellt. Dieser beruht im Wesentlichen auf der Modellierung der druckbeanspruchten Bewehrung. Diese weiterentwickelte Zonenmethode wird durch die Nachrechnung von Laborversuchen validiert und das Sicherheitsniveau durch eine vollprobabilistische Analyse und den Vergleich mit dem allgemeinen Verfahren bestimmt.
Living heritage sites are strongly connected to their historical, geographical, socio-political and cultural context. A descriptive narrative of the evolutionary process of the living heritage site of a Sufi shrine is undertaken in this research. It focuses on the changing relationship between the spatial and socio-cultural aspects over time. The larger or macro regional context is interrelated to the micro architectural context. The tangible heritage is defined by and intimately tied to the intangible aspects of the heritage. It is these constituting macro and micro elements and their interrelationships particularly through space and architecture that the research thesis explores in its documentation and analysis.
The Sufi shrine in the South Asian Pakistani context is representative of a larger culture in the precolonial era. It is an expression of an indigenous modernity, belonging to a certain time period, place and community. The Sufi shrine as a building type has evolved from the precolonial time period, particularly starting at the golden ages of the Muslim Empire in the world (9th – 12th century), through the colonial age when western modernity arrived until the current neoliberal paradigm within the post independence period. Continued and evolved use of space, ritualistic performances, multiple social groups using the site are various elements whose documentation and analysis can establish the essential co-relations that contribute to continuity of its historical living. Physical and social relation of the historic site to its immediate settlement context is also a significant element that preserves the socio-cultural context.
The chosen case of the Shrine of Shah Abdul Latif Bhitai, situated in the small town of Bhitshah in the province of Sindh, Pakistan forms a unique example where the particular physical and socio-cultural environment forms the context within which the Sufi heritage lives and survives. It is well integrated within its context at multiple levels. What are these levels and how do the constituting elements integrate is a major subject of research? These form the background to defining some of the basic issues and questions addressed in this doctoral thesis.
Given that living heritage sites are unique due to their particular association to the context, the case study method was used to gain deeper insight and understanding on the topic.
In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly.
In this work, molecular separation of aqueous-organic was simulated by using combined soft computing-mechanistic approaches. The considered separation system was a microporous membrane contactor for separation of benzoic acid from water by contacting with an organic phase containing extractor molecules. Indeed, extractive separation is carried out using membrane technology where complex of solute-organic is formed at the interface. The main focus was to develop a simulation methodology for prediction of concentration distribution of solute (benzoic acid) in the feed side of the membrane system, as the removal efficiency of the system is determined by concentration distribution of the solute in the feed channel. The pattern of Adaptive Neuro-Fuzzy Inference System (ANFIS) was optimized by finding the optimum membership function, learning percentage, and a number of rules. The ANFIS was trained using the extracted data from the CFD simulation of the membrane system. The comparisons between the predicted concentration distribution by ANFIS and CFD data revealed that the optimized ANFIS pattern can be used as a predictive tool for simulation of the process. The R2 of higher than 0.99 was obtained for the optimized ANFIS model. The main privilege of the developed methodology is its very low computational time for simulation of the system and can be used as a rigorous simulation tool for understanding and design of membrane-based systems.
Highlights are, Molecular separation using microporous membranes. Developing hybrid model based on ANFIS-CFD for the separation process, Optimization of ANFIS structure for prediction of separation process
The accurate representation of aerodynamic forces is essential for a safe, yet reasonable design of long-span bridges subjected to wind effects. In this paper, a novel extension of the Pseudo-three-dimensional Vortex Particle Method (Pseudo-3D VPM) is presented for Computational Fluid Dynamics (CFD) buffeting analysis of line-like structures. This extension entails an introduction of free-stream turbulent fluctuations, based on the velocity-based turbulence generation. The aerodynamic response of a long-span bridge is obtained by subjecting the 3D dynamic representation of the structure to correlated free-stream turbulence in two-dimensional (2D) fluid planes, which are positioned along the bridge deck. The span-wise correlation of the free-stream turbulence between the 2D fluid planes is established based on Taylor's hypothesis of frozen turbulence. Moreover, the application of the laminar Pseudo-3D VPM is extended to a multimode flutter analysis. Finally, the structural response from the Pseudo-3D flutter and buffeting analyses is verified with the response, computed using the semi-analytical linear unsteady model in the time-domain. Meaningful merits of the turbulent Pseudo-3D VPM with respect to the linear unsteady model are the consideration of the 2D aerodynamic nonlinearity, nonlinear fluid memory, vortex shedding and local non-stationary turbulence effects in the aerodynamic forces. The good agreement of the responses for the two models in the 3D analyses demonstrates the applicability of the Pseudo-3D VPM for aeroelastic analyses of line-like structures under turbulent and laminar free-stream conditions.
Wireless sensor networks have attracted great attention for applications in structural health monitoring due to their ease of use, flexibility of deployment, and cost-effectiveness. This paper presents a software framework for WiFi-based wireless sensor networks composed of low-cost mass market single-board computers. A number of specific system-level software components were developed to enable robust data acquisition, data processing, sensor network communication, and timing with a focus on structural health monitoring (SHM) applications. The framework was validated on Raspberry Pi computers, and its performance was studied in detail. The paper presents several characteristics of the measurement quality such as sampling accuracy and time synchronization and discusses the specific limitations of the system. The implementation includes a complementary smartphone application that is utilized for data acquisition, visualization, and analysis. A prototypical implementation further demonstrates the feasibility of integrating smartphones as data acquisition nodes into the network, utilizing their internal sensors. The measurement system was employed in several monitoring campaigns, three of which are documented in detail. The suitability of the system is evaluated based on comparisons of target quantities with reference measurements. The results indicate that the presented system can robustly achieve a measurement performance commensurate with that required in many typical SHM tasks such as modal identification. As such, it represents a cost-effective alternative to more traditional monitoring solutions.
Urban planners are often challenged with the task of developing design solutions which must meet multiple, and often contradictory, criteria. In this paper, we investigated the trade-offs between social, psychological, and energy potential of the fundamental elements of urban form: the street network and the building massing. Since formal mehods to evaluate urban form from the psychological and social point of view are not readily available, we developed a methodological framework to quantify these criteria as the first contribution in this paper. To evaluate the psychological potential, we conducted a three-tiered empirical study starting from real world environments and then abstracting them to virtual environments. In each context, the implicit (physiological) response and explicit (subjective) response of pedestrians were measured. To quantify the social potential, we developed a street network centrality-based measure of social accessibility.
For the energy potential, we created an energy model to analyze the impact of pure geometric form on the energy demand of the building stock. The second contribution of this work is a method to identify distinct clusters of urban form and, for each, explore the trade-offs between the select design criteria. We applied this method to two case studies identifying nine types of urban form and their respective potential trade-offs, which are directly applicable for the assessment of strategic decisions regarding urban form during the early planning stages.
The underlying goal of this work is to reduce the uncertainty related to thermally induced stress prediction. This is accomplished by considering use of non-linear material behavior, notably path dependent thermal hysteresis behavior in the elastic properties.
Primary novel factors of this work center on two aspects.
1. Broad material characterization and mechanistic material understanding, giving insight into why this class of material behaves in characteristic manners.
2. Development and implementation of a thermal hysteresis material model and its use to determine impact on overall macroscopic stress predictions.
Results highlight microcracking evolution and behavior as the dominant mechanism for material property complexity in this class of materials. Additionally, it was found that for the cases studied, thermal hysteresis behavior impacts relevant peak stress predictions of a heavy-duty diesel particulate filter undergoing a drop-to-idle regeneration by less than ~15% for all conditions tested. It is also found that path independent heating curves may be utilized for a linear solution assumption to simplify analysis.
This work brings forth a newly conceived concept of a 3 state, 4 path, thermally induced microcrack evolution process; demonstrates experimental behavior that is consistent with the proposed mechanisms, develops a mathematical framework that describes the process and quantifies the impact in a real world application space.
Railway systems are highly competitive compared with other means of transportation because of their distinct advantages in speed, convenience and safety. Therefore, the demand for railway transportation is increasing around the world. Constructing railway tracks and related engineering structures in areas with loose or soft cohesive subgrade usually leads to problems, such as excessive settlement, deformation and instability. Several remedies have been proposed to avoid or reduce such problems, including the replacement of soft soil and the construction of piles or stone columns.
This thesis aims to expand the geotechnical knowledge of how to improve subgrade ballasted railway tracks, using stone columns and numerical modeling for the railway infrastructure. Three aspects are considered: i) railway track dynamics modeling and validation by field measurements, ii) modeling and parametric studies on stone columns, and iii) studies on the linear and non-linear behavior of stone columns under the dynamic load of trains.
The first step of this research was to develop a reliable numerical model of a railway track. The finite element method in a time domain was used for either a 2D plane strain or 3D analysis. Individual methods for modeling a train load in 2D and 3D were implemented and are discussed in this thesis. The developed loading method was validated with three different railway tracks using obtained vibration measurements. Later, these numerical models were used to analyze the influence of stone column length and train speed in the stress field.
The performance of the treated ground depends on various parameters, such as the strength of stone columns, spacing, length and diameter of the columns. Therefore, the second step was devoted to a parameter study of stone columns as a unit cell with an axisymmetric condition. The results showed that even short stone columns were effective for settlement reduction, and area of replacement was the main influential parameter in their performance.
The third part of this thesis focuses on a hypothetical railway-track response to the passage of various train speeds and the influence of stone-column length. The stress-strain response of subgrade is analyzed under either an elastic–perfectly plastic or advanced constitutive model. The non-linear soil response in the finite element method and the impact of train speed and stone column length on railway tracks are also evaluated. Moreover, the reductions of induced vibration – in both a horizontal and a vertical direction – after improvement are investigated.
Scalarization methods are a category of multiobjective optimization (MOO) methods. These methods allow the usage of conventional single objective optimization algorithms, as scalarization methods reformulate the MOO problem into a single objective optimization problem. The scalarization methods analysed within this thesis are the Weighted Sum (WS), the Epsilon-Constraint (EC), and the MinMax (MM) method. After explaining the approach of each method, the WS, EC and MM are applied, a-posteriori, to three different examples: to the Kursawe function; to the ten bar truss, a common benchmark problem in structural optimization; and to the metamodel of an aero engine exit module.
The aim is to evaluate and compare the performance of each scalarization method that is examined within this thesis. The evaluation is conducted using performance metrics, such as the hypervolume and the generational distance, as well as using visual comparison.
The application to the three examples gives insight into the advantages and disadvantages of each method, and provides further understanding of an adequate application of the methods concerning high dimensional optimization problems.
This thesis addresses an adaptive higher-order method based on a Geometry Independent Field approximatTion(GIFT) of polynomial/rationals plines over hierarchical T-meshes(PHT/RHT-splines).
In isogeometric analysis, basis functions used for constructing geometric models in computer-aided design(CAD) are also employed to discretize the partial differential equations(PDEs) for numerical analysis. Non-uniform rational B-Splines(NURBS) are the most commonly used basis functions in CAD. However, they may not be ideal for numerical analysis where local refinement is required.
The alternative method GIFT deploys different splines for geometry and numerical analysis. NURBS are utilized for the geometry representation, while for the field solution, PHT/RHT-splines are used. PHT-splines not only inherit the useful properties of B-splines and NURBS, but also possess the capabilities of local refinement and hierarchical structure. The smooth basis function properties of PHT-splines make them suitable for analysis purposes. While most problems considered in isogeometric analysis can be solved efficiently when the solution is smooth, many non-trivial problems have rough solutions. For example, this can be caused by the presence of re-entrant corners in the domain. For such problems, a tensor-product basis (as in the case of NURBS) is less suitable for resolving the singularities that appear since refinement propagates throughout the computational domain. Hierarchical bases and local refinement (as in the case of PHT-splines) allow for a more efficient way to resolve these singularities by adding more degrees of freedom where they are necessary. In order to drive the adaptive refinement, an efficient recovery-based error estimator is proposed in this thesis. The estimator produces a recovery solution which is a more accurate approximation than the computed numerical solution. Several two- and three-dimensional numerical investigations with PHT-splines of higher order and continuity prove that the proposed method is capable of obtaining results with higher accuracy, better convergence, fewer degrees of freedom and less computational cost than NURBS for smooth solution problems. The adaptive GIFT method utilizing PHT-splines with the recovery-based error estimator is used for solutions with discontinuities or singularities where adaptive local refinement in particular domains of interest achieves higher accuracy with fewer degrees of freedom. This method also proves that it can handle complicated multi-patch domains for two- and three-dimensional problems outperforming uniform refinement in terms of degrees of freedom and computational cost.
A categorical perspective towards aerodynamic models for aeroelastic analyses of bridge decks
(2019)
Reliable modelling in structural engineering is crucial for the serviceability and safety of structures. A huge variety of aerodynamic models for aeroelastic analyses of bridges poses natural questions on their complexity and thus, quality. Moreover, a direct comparison of aerodynamic models is typically either not possible or senseless, as the models can be based on very different physical assumptions. Therefore, to address the question of principal comparability and complexity of models, a more abstract approach, accounting for the effect of basic physical assumptions, is necessary.
This paper presents an application of a recently introduced category theory-based modelling approach to a diverse set of models from bridge aerodynamics. Initially, the categorical approach is extended to allow an adequate description of aerodynamic models. Complexity of the selected aerodynamic models is evaluated, based on which model comparability is established. Finally, the utility of the approach for model comparison and characterisation is demonstrated on an illustrative example from bridge aeroelasticity. The outcome of this study is intended to serve as an alternative framework for model comparison and impact future model assessment studies of mathematical models for engineering applications.
Landwirtschaftliche Biogasanlagen leisten mit ca. 9.300 Anlagen und einem Anteil von 5,3% an der Stromerzeugung, einen Beitrag zur Erzeugung Erneuer-barer Energien in Deutschland. Die Optimierung dieser Anlagen fördert die nachhaltige Bereitstellung von Strom, Wärme und BioErdgas.
Das Ergebnis dieser Forschungsarbeit ist die Entwicklung eines mehrmethodi-schen Bewertungsansatzes zur Beschreibung der Qualität der Eingangs-substrate als Teil einer ganzheitlichen Prozessoptimierung. Dies gelingt durch die kombinierte Nutzung klassischer Analysesätze, der Nutzung organolepti-scher Parameter – der humansensorischen Sinnenprüfung – und der Integration von prozess- und substratspezifischem Erfahrungswissen. Anhand von halbtechnischen Versuchen werden Korrelationen und Kausalitäten zwi-schen chemisch-physikalischen, biologischen, organoleptischen und erfahrungsbezogenen Parametern erforscht. Die Entwicklung einer Fallbasis mit Hilfe des Fallbasierten Schließens, einer Form Künstlicher Intelligenz, zeigt das Entwicklungs- und Integrationspotenzial der Automatisierung auf, insbesondere auch im Hinblick auf neue Ansätze z.B. Industrie 4.0. Erste Lösungen zur Bewältigung der identifizierten Herausforderungen der mehrmethodischen Prozessbewertung werden vorgestellt.
Abschließend wird ein Ausblick auf den weiteren Forschungsbedarf gegeben und die Übertragbarkeit des mehrmethodischen Bewertungsansatzes auf andere Anwendungsfelder z.B. Bioabfallbehandlung, Kläranlagen angeregt.
Long-span bridges are prone to wind-induced vibrations. Therefore, a reliable representation of the aerodynamic forces acting on a bridge deck is of a major significance for the design of such structures. This paper presents a systematic study of the two-dimensional (2D) fluid-structure interaction of a bridge deck under smooth and turbulent wind conditions. Aerodynamic forces are modeled by two approaches: a computational fluid dynamics (CFD) model and six semi-analytical models. The vortex particle method is utilized for the CFD model and the free-stream turbulence is introduced by seeding vortex particles upstream of the deck with prescribed spectral characteristics. The employed semi-analytical models are based on the quasi-steady and linear unsteady assumptions and aerodynamic coefficients obtained from CFD analyses.
The underlying assumptions of the semi-analytical aerodynamic models are used to interpret the results of buffeting forces and aeroelastic response due to a free-stream turbulence in comparison with the CFD model. Extensive discussions are provided to analyze the effect of linear fluid memory and quasi-steady nonlinearity from a CFD perspective. The outcome of the analyses indicates that the fluid memory is a governing effect in the buffeting forces and aeroelastic response, while the effect of the nonlinearity is overestimated by the quasi-steady models. Finally, flutter analyses are performed and the obtained critical velocities are further compared with wind tunnel results, followed by a brief examination of the post-flutter behavior. The results of this study provide a deeper understanding of the extent of which the applied models are able to replicate the physical processes for fluid-structure interaction phenomena in bridge aerodynamics and aeroelasticity.
Identifying cable force with vibration-based methods has become widely used in engineering practice due to simplicity of application. The string taut theory provides a simple definition of the relationship between natural frequencies and the tension force of a cable. However, this theory assumes a perfectly flexible non-sagging cable pinned at its ends. These assumptions do not reflect all cases, especially when the cable is short, under low tension forces or the supports are partially flexible. Extradosed bridges, which are distinguished from cable-stayed bridges by their low pylon height, have shorter cables. Therefore the application of the conventional string taut theory to identify cable forces on extradosed bridge cables might be inadequate to identify cable forces.
In this work, numerical modelling of an extradosed bridge cable saddled on a circular deviator at pylon is conducted. The model is validated with the catenary analytical solution and its static and dynamic behaviours are studied. The effect of a saddle support is found to positively affect the cable stiffness by geometric means; longer saddle radius increases the cable stiffness by suppressing the deformations near the saddle. Further, accounting the effects of bending stiffness in the numerical model by using beam elements show considerable deviation from models with truss elements (i.e. zero bending stiffness). This deviation is manifested when comparing the static and dynamic properties. This motivates a more thorough study of bending stiffness effects on short cables.
Bending stiffness effects are studied using two rods connected with several springs along their length. Under bending moments, the springs resist the rods' relative axial displacement by the springs' transverse component. This concept is used to identify bending stiffness values by utilizing the parallel axis theorem to quantify ratios of the second moment of area. These ratios are calculated based on the setup of the springs (e.g. number of springs per unit length, transverse stiffness, etc...). The numerical model based on this concept agrees well with the theoretical values computed using upper and lower bounds of the parallel axis theorem.
The proposed concept of quantifying ratios of the second moment of area using springs as connection between cable rods is applied on an actual extradosed bridge geometry. The model is examined by comparison to the previously validated global numerical model. The two models showed good correlation under various changing parameters. This allowed further study of the effects of stick/slip behaviour between cable rods on an actual bridge geometry.
Renewable energy use is on the rise and these alternative resources of energy can help combat with the climate change. Around 80% of the world's electricity comes from coal and petroleum however, the renewables are the fastest growing source of energy in the world. Solar, wind, hydro, geothermal and biogas are the most common forms of renewable energy. Among them, wind energy is emerging as a reliable and large-scaled source of power production. The recent research and confidence in the performance has led to the construction of more and bigger wind turbines around the world. As wind turbines are getting bigger, a concern regarding their safety is also in discussion. Wind turbines are expensive machinery to construct and the enormous capital investment is one of the main reasons, why many countries are unable to adopt to the wind energy. Generally, a reliable wind turbine will result in better performance and assist in minimizing the cost of operation. If a wind turbine fails, it's a loss of investment and can be harmful for the surrounding habitat. This thesis aims towards estimating the reliability of an offshore wind turbine. A model of Jacket type offshore wind turbine is prepared by using finite element software package ABAQUS and is compared with the structural failure criteria of the wind turbine tower. UQLab, which is a general uncertainty quantification framework developed at ETH Zürich, is used for the reliability analysis. Several probabilistic methods are included in the framework of UQLab, which include Monte Carlo, First Order Reliability Analysis and Adaptive Kriging Monte Carlo simulation. This reliability study is performed only for the structural failure of the wind turbine but it can be extended to many other forms of failures e.g. reliability for power production, or reliability for different component failures etc. It's a useful tool that can be utilized to estimate the reliability of future wind turbines, that could result in more safer and better performance of wind turbines.
Gashochdruckleitungen aus Stahl werden mit Hilfe eines deterministischen Sicherheitskonzeptes bemessen. Im unveränderten Bemessungszustand und im bestimmungsgemäßem Betrieb ist die statische Tragfähigkeit der Gashochdruckleitungen gegeben.
Mit den Jahren unterliegen Gashochdruckleitungen aus Stahl geometrischen Veränderungen, die häufig durch Korrosion hervorgerufen werden. Die Beurteilung der statischen Tragfähigkeit erfolgt dann unter Berücksichtigung dieser geometrischen Änderung.
Deterministische Sicherheitsbeiwerte der Bemessung neuer Gashochdruckleitungen können für die Bemessung bestehender korrosionsgeschädigter Gashochdruckleitungen nicht herangezogen werden, da diese einen definierten Beanspruchungs- und Geometriezustand unterstellen, welcher durch den geometrischen Einfluss der Korrosion so nicht mehr besteht.
Die Arbeit befasst sich mit der Ermittlung deterministischer Sicherheitsbeiwerte für die Bemessung korrosionsgeschädigter Gashochdruckleitungen auf Basis von Versagenswahrscheinlichkeiten und stellt ein Anwendungskonzept zu deren Nutzung vor.
The latest earthquakes have proven that several existing buildings, particularly in developing countries, are not secured from damages of earthquake. A variety of statistical and machine-learning approaches have been proposed to identify vulnerable buildings for the prioritization of retrofitting. The present work aims to investigate earthquake susceptibility through the combination of six building performance variables that can be used to obtain an optimal prediction of the damage state of reinforced concrete buildings using artificial neural network (ANN). In this regard, a multi-layer perceptron network is trained and optimized using a database of 484 damaged buildings from the Düzce earthquake in Turkey. The results demonstrate the feasibility and effectiveness of the selected ANN approach to classify concrete structural damage that can be used as a preliminary assessment technique to identify vulnerable buildings in disaster risk-management programs.
Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe für die Verwendung als Energieträger, Nahrungsmittel oder als Ausgangsstoff für Pharmazeutika. Dass die Quantität und Qualität der in natürlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und küstennahen Aquakulturen in Europa gegenwärtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabhängige Algenproduktion zu ermöglichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt.
Im Ergebnis wird für den gegenwärtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz für die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz für die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erhöht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf jährlich 460.869€ für Ulva intestinalis, 4.010€ für Fucus vesiculosus und 16.913€ für Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gezüchteten Grünalge Ulva intestinalis anzustreben und die Produktivität der Zuchtanlage im Sinne des Optimalszenarios zu steigern.
Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low.
Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs.
Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite.
It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.
Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity
(2020)
Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges.
Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension
of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality.
In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity.
The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips.
Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles’ strength can be related with the target gust amplitudes a priori.
The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind–bridge interaction and suggest appropriate modeling strategies for an enhanced design.
Earthquake is among the most devastating natural disasters causing severe economical, environmental, and social destruction. Earthquake safety assessment and building hazard monitoring can highly contribute to urban sustainability through identification and insight into optimum materials and structures. While the vulnerability of structures mainly depends on the structural resistance, the safety assessment of buildings can be highly challenging. In this paper, we consider the Rapid Visual Screening (RVS) method, which is a qualitative procedure for estimating structural scores for buildings suitable for medium- to high-seismic cases. This paper presents an overview of the common RVS methods, i.e., FEMA P-154, IITK-GGSDMA, and EMPI. To examine the accuracy and validation, a practical comparison is performed between their assessment and observed damage of reinforced concrete buildings from a street survey in the Bingöl region, Turkey, after the 1 May 2003 earthquake. The results demonstrate that the application of RVS methods for preliminary damage estimation is a vital tool. Furthermore, the comparative analysis showed that FEMA P-154 creates an assessment that overestimates damage states and is not economically viable, while EMPI and IITK-GGSDMA provide more accurate and practical estimation, respectively.
Rapid Visual Screening (RVS) is a procedure that estimates structural scores for buildings and prioritizes their retrofit and upgrade requirements. Despite the speed and simplicity of RVS, many of the collected parameters are non-commensurable and include subjectivity due to visual observations. This might cause uncertainties in the evaluation, which emphasizes the use of a fuzzy-based method. This study aims to propose a novel RVS methodology based on the interval type-2 fuzzy logic system (IT2FLS) to set the priority of vulnerable building to undergo detailed assessment while covering uncertainties and minimizing their effects during evaluation. The proposed method estimates the vulnerability of a building, in terms of Damage Index, considering the number of stories, age of building, plan irregularity, vertical irregularity, building quality, and peak ground velocity, as inputs with a single output variable. Applicability of the proposed method has been investigated using a post-earthquake damage database of reinforced concrete buildings from the Bingöl and Düzce earthquakes in Turkey.
Abstract In the first part of this research, the utilization of tuned mass dampers in the vibration control of tall buildings during earthquake excitations is studied. The main issues such as optimizing the parameters of the dampers and studying the effects of frequency content of the target earthquakes are addressed.
Abstract The non-dominated sorting genetic algorithm method is improved by upgrading generic operators, and is utilized to develop a framework for determining the optimum placement and parameters of dampers in tall buildings. A case study is presented in which the optimal placement and properties of dampers are determined for a model of a tall building under different earthquake excitations through computer simulations.
Abstract In the second part, a novel framework for the brain learning-based intelligent seismic control of smart structures is developed. In this approach, a deep neural network learns how to improve structural responses during earthquake excitations using feedback control.
Abstract Reinforcement learning method is improved and utilized to develop a framework for training the deep neural network as an intelligent controller. The efficiency of the developed framework is examined through two case studies including a single-degree-of-freedom system and a high-rise building under different earthquake excitation records.
Abstract The results show that the controller gradually develops an optimum control policy to reduce the vibrations of a structure under an earthquake excitation through a cyclical process of actions and observations.
Abstract It is shown that the controller efficiently improves the structural responses under new earthquake excitations for which it was not trained. Moreover, it is shown that the controller has a stable performance under uncertainties.
In recent years, substantial attention has been devoted to thermoelastic multifield problems and their numerical analysis. Thermoelasticity is one of the important categories of multifield problems which deals with the effect of mechanical and thermal disturbances on an elastic body. In other words, thermoelasticity encompasses the phenomena that describe the elastic and thermal behavior of solids and their interactions under thermo-mechanical loadings. Since providing an analytical solution for general coupled thermoelasticity problems is mathematically complicated, the development of alternative numerical solution techniques seems essential.
Due to the nature of numerical analysis methods, presence of error in results is inevitable, therefore in any numerical simulation, the main concern is the accuracy of the approximation. There are different error estimation (EE) methods to assess the overall quality of numerical approximation. In many real-life numerical simulations, not only the overall error, but also the local error or error in a particular quantity of interest is of main interest. The error estimation techniques which are developed to evaluate the error in the quantity of interest are known as “goal-oriented” error estimation (GOEE) methods.
This project, for the first time, investigates the classical a posteriori error estimation and goal-oriented a posteriori error estimation in 2D/3D thermoelasticity problems. Generally, the a posteriori error estimation techniques can be categorized into two major branches of recovery-based and residual-based error estimators. In this research, application of both recovery- and residual-based error estimators in thermoelasticity are studied. Moreover, in order to reduce the error in the quantity of interest efficiently and optimally in 2D and 3D thermoelastic problems, goal-oriented adaptive mesh refinement is performed.
As the first application category, the error estimation in classical Thermoelasticity (CTE) is investigated. In the first step, a rh-adaptive thermo-mechanical formulation based on goal-oriented error estimation is proposed.The developed goal-oriented error estimation relies on different stress recovery techniques, i.e., the superconvergent patch recovery (SPR), L2-projection patch recovery (L2-PR), and weighted superconvergent patch recovery (WSPR). Moreover, a new adaptive refinement strategy (ARS) is presented that minimizes the error in a quantity of interest and refines the discretization such that the error is equally distributed in the refined mesh. The method is validated by numerous numerical examples where an analytical solution or reference solution is available.
After investigating error estimation in classical thermoelasticity and evaluating the quality of presented error estimators, we extended the application of the developed goal-oriented error estimation and the associated adaptive refinement technique to the classical fully coupled dynamic thermoelasticity. In this part, we present an adaptive method for coupled dynamic thermoelasticity problems based on goal-oriented error estimation. We use dimensionless variables in the finite element formulation and for the time integration we employ the acceleration-based Newmark-_ method. In this part, the SPR, L2-PR, and WSPR recovery methods are exploited to estimate the error in the quantity of interest (QoI). By using
adaptive refinement in space, the error in the quantity of interest is minimized. Therefore, the discretization is refined such that the error is equally distributed in the refined mesh. We demonstrate the efficiency of this method by numerous numerical examples.
After studying the recovery-based error estimators, we investigated the residual-based error estimation in thermoelasticity. In the last part of this research, we present a 3D adaptive method for thermoelastic problems based on goal-oriented error estimation where the error is measured with respect to a pointwise quantity of interest. We developed a method for a posteriori error estimation and mesh adaptation based on dual weighted residual (DWR) method relying on the duality principles and consisting of an adjoint problem solution. Here, we consider the application of the derived estimator and mesh refinement to two-/three-dimensional (2D/3D) thermo-mechanical multifield problems. In this study, the goal is considered to be given by singular pointwise functions, such as the point value or point value derivative at a specific point of interest (PoI). An adaptive algorithm has been adopted to refine the mesh to minimize the goal in the quantity of interest.
The mesh adaptivity procedure based on the DWR method is performed by adaptive local h-refinement/coarsening with allowed hanging nodes. According to the proposed DWR method, the error contribution of each element is evaluated. In the refinement process, the contribution of each element to the goal error is considered as the mesh refinement criterion.
In this study, we substantiate the accuracy and performance of this method by several numerical examples with available analytical solutions. Here, 2D and 3D problems under thermo-mechanical loadings are considered as benchmark problems. To show how accurately the derived estimator captures the exact error in the evaluation of the pointwise quantity of interest, in all examples, considering the analytical solutions, the goal error effectivity index as a standard measure of the quality of an estimator is calculated. Moreover, in order to demonstrate the efficiency of the proposed method and show the optimal behavior of the employed refinement method, the results of different conventional error estimators and refinement techniques (e.g., global uniform refinement, Kelly, and weighted Kelly techniques) are used for comparison.
Material properties play a critical role in durable products manufacturing. Estimation of the precise characteristics in different scales requires complex and expensive experimental measurements. Potentially, computational methods can provide a platform to determine the fundamental properties before the final experiment. Multi-scale computational modeling leads to the modeling of the various time, and length scales include nano, micro, meso, and macro scales. These scales can be modeled separately or in correlation with coarser scales. Depend on the interested scales modeling, the right selection of multi-scale methods leads to reliable results and affordable computational cost. The present dissertation deals with the problems in various length and time scales using computational methods include density functional theory (DFT), molecular mechanics (MM), molecular dynamics (MD), and finite element (FE) methods.
Physical and chemical interactions in lower scales determine the coarser scale properties. Particles interaction modeling and exploring fundamental properties are significant challenges of computational science. Downscale modelings need more computational effort due to a large number of interacted atoms/particles. To deal with this problem and bring up a fine-scale (nano) as a coarse-scale (macro) problem, we extended an atomic-continuum framework. The discrete atomic models solve as a continuum problem using the computationally efficient FE method. MM or force field method based on a set of assumptions approximates a solution on the atomic scale. In this method, atoms and bonds model as a harmonic oscillator with a system of mass and springs. The negative gradient of the potential energy equal to the forces on each atom. In this way, each bond's total potential energy includes bonded, and non-bonded energies are simulated as equivalent structural strain energies. Finally, the chemical nature of the atomic bond is modeled as a piezoelectric beam element that solves by the FE method.
Exploring novel materials with unique properties is a demand for various industrial applications. During the last decade, many two-dimensional (2D) materials have been synthesized and shown outstanding properties. Investigation of the probable defects during the formation/fabrication process and studying their strength under severe service life are the critical tasks to explore performance prospects. We studied various defects include nano crack, notch, and point vacancy (Stone-Wales defect) defects employing MD analysis. Classical MD has been used to simulate a considerable amount of molecules at micro-, and meso- scales. Pristine and defective nanosheet structures considered under the uniaxial tensile loading at various temperatures using open-source LAMMPS codes. The results were visualized with the open-source software of OVITO and VMD.
Quantum based first principle calculations have been conducting at electronic scales and known as the most accurate Ab initio methods. However, they are computationally expensive to apply for large systems. We used density functional theory (DFT) to estimate the mechanical and electrochemical response of the 2D materials. Many-body Schrödinger's equation describes the motion and interactions of the solid-state particles. Solid describes as a system of positive nuclei and negative electrons, all electromagnetically interacting with each other, where the wave function theory describes the quantum state of the set of particles. However, dealing with the 3N coordinates of the electrons, nuclei, and N coordinates of the electrons spin components makes the governing equation unsolvable for just a few interacted atoms. Some assumptions and theories like Born Oppenheimer and Hartree-Fock mean-field and Hohenberg-Kohn theories are needed to treat with this equation. First, Born Oppenheimer approximation reduces it to the only electronic coordinates. Then Kohn and Sham, based on Hartree-Fock and Hohenberg-Kohn theories, assumed an equivalent fictitious non-interacting electrons system as an electron density functional such that their ground state energies are equal to a set of interacting electrons. Exchange-correlation energy functionals are responsible for satisfying the equivalency between both systems. The exact form of the exchange-correlation functional is not known. However, there are widely used methods to derive functionals like local density approximation (LDA), Generalized gradient approximation (GGA), and hybrid functionals (e.g., B3LYP). In our study, DFT performed using VASP codes within the GGA/PBE approximation, and visualization/post-processing of the results realized via open-source software of VESTA.
The extensive DFT calculations are conducted 2D nanomaterials prospects as anode/cathode electrode materials for batteries. Metal-ion batteries' performance strongly depends on the design of novel electrode material. Two-dimensional (2D) materials have developed a remarkable interest in using as an electrode in battery cells due to their excellent properties. Desirable battery energy storage systems (BESS) must satisfy the high energy density, safe operation, and efficient production costs. Batteries have been using in electronic devices and provide a solution to the environmental issues and store the discontinuous energies generated from renewable wind or solar power plants. Therefore, exploring optimal electrode materials can improve storage capacity and charging/discharging rates, leading to the design of advanced batteries.
Our results in multiple scales highlight not only the proposed and employed methods' efficiencies but also promising prospect of recently synthesized nanomaterials and their applications as an anode material. In this way, first, a novel approach developed for the modeling of the 1D nanotube as a continuum piezoelectric beam element. The results converged and matched closely with those from experiments and other more complex models. Then mechanical properties of nanosheets estimated and the failure mechanisms results provide a useful guide for further use in prospect applications. Our results indicated a comprehensive and useful vision concerning the mechanical properties of nanosheets with/without defects. Finally, mechanical and electrochemical properties of the several 2D nanomaterials are explored for the first time—their application performance as an anode material illustrates high potentials in manufacturing super-stretchable and ultrahigh-capacity battery energy storage systems (BESS). Our results exhibited better performance in comparison to the available commercial anode materials.
Die vorliegende Arbeit richtet sich an Ingenieur*innen und Wissenschaftler*innen der technischen Gebäudeausrüstung. Sie greift einen sich abzeichnenden Änderungsbedarf in der Umwelt- und Nachhaltigkeitsbewertung von Gebäuden und wärmetechnischen Anlagen auf. Der aktuell genutzte nicht erneuerbare Primärenergiebedarf wird insbesondere hinsichtlich künftiger politischer Klima- und Umweltschutzziele als alleinige Bewertungsgröße nicht ausreichend sein. Die mit dieser Arbeit vorgestellte Ökoeffizienzbewertungsmethode kann als geeignetes Instrument zur Lösung der Probleme beitragen. Sie ermöglicht systematische, ganzheitliche Bewertungen und reproduzierbare Vergleiche wärmetechnischer Anlagen bezüglich ihrer ökologischen und ökonomischen Nachhaltigkeit. Die wesentlichsten Neuentwicklungen sind die spezifische Umweltleistung, in Erweiterung zum genutzten Primärenergiefaktor, und der Ökoeffizienzindikator UWI.
Antimicrobial resistance (AMR) is identified by the World Health Organization (WHO) as one of the top ten threats to public health worldwide. In addition to public health, AMR also poses a major threat to food security and economic development. Current sanitation systems contribute to the emergence and spread of AMR and lack effective AMR mitigation measures. This study assesses source separation of blackwater as a mitigation measure against AMR. A source-separation-modified combined sanitation system with separate collection of blackwater and graywater is conceptually described. Measures taken at the source, such as the separate collection and discharge of material flows, were not considered so far on a load balance basis, i.e., they have not yet been evaluated for their effectiveness. The sanitation system described is compared with a combined system and a separate system regarding AMR emissions by means of simulation. AMR is represented in the simulation model by one proxy parameter each for antibiotics (sulfamethoxa-zole), antibiotic-resistant bacteria (extended-spectrum beta-lactamase E. Coli), and antibiotic re-sistance genes (blaTEM). The simulation results suggest that the source-separation-based sanitation system reduces emissions of antibiotic-resistant bacteria and antibiotic resistance genes into the aquatic environment by more than six logarithm steps compared to combined systems. Sulfa-methoxazole emissions can be reduced by 75.5% by keeping blackwater separate from graywater and treating it sufficiently. In summary, sanitation systems incorporating source separation are, to date, among the most effective means of preventing the emission of AMR into the aquatic envi-ronment.
In the last two decades, Peridynamics (PD) attracts much attention in the field of fracture mechanics. One key feature of PD is the nonlocality, which is quite different from the ideas in conventional methods such as FEM and meshless method. However, conventional PD suffers from problems such as constant horizon, explicit algorithm, hourglass mode. In this thesis, by examining the nonlocality with scrutiny, we proposed several new concepts such as dual-horizon (DH) in PD, dual-support (DS) in smoothed particle hydrodynamics (SPH), nonlocal operators and operator energy functional. The conventional PD (SPH) is incorporated in the DH-PD (DS-SPH), which can adopt an inhomogeneous discretization and inhomogeneous support domains. The DH-PD (DS-SPH) can be viewed as some fundamental improvement on the conventional PD (SPH). Dual formulation of PD and SPH allows h-adaptivity while satisfying the conservations of linear momentum, angular momentum and energy. By developing the concept of nonlocality further, we introduced the nonlocal operator method as a generalization of DH-PD. Combined with energy functional of various physical models, the nonlocal forms based on dual-support concept are derived. In addition, the variation of the energy functional allows implicit formulation of the nonlocal theory. At last, we developed the higher order nonlocal operator method which is capable of solving higher order partial differential equations on arbitrary domain in higher dimensional space. Since the concepts are developed gradually, we described our findings chronologically.
In chapter 2, we developed a DH-PD formulation that includes varying horizon sizes and solves the "ghost force" issue. The concept of dual-horizon considers the unbalanced interactions between the particles with different horizon sizes. The present formulation fulfills both the balances of linear momentum and angular momentum exactly with arbitrary particle discretization. All three peridynamic formulations, namely bond based, ordinary state based and non-ordinary state based peridynamics can be implemented within the DH-PD framework. A simple adaptive refinement procedure (h-adaptivity) is proposed reducing the computational cost. Both two- and three- dimensional examples including the Kalthoff-Winkler experiment and plate with branching cracks are tested to demonstrate the capability of the method.
In chapter 3, a nonlocal operator method (NOM) based on the variational principle is proposed for the solution of waveguide problem in computational electromagnetic field. Common differential operators as well as the variational forms are defined within the context of nonlocal operators. The present nonlocal formulation allows the assembling of the tangent stiffness matrix with ease, which is necessary for the eigenvalue analysis of the waveguide problem. The present formulation is applied to solve 1D Schrodinger equation, 2D electrostatic problem and the differential electromagnetic vector wave equations based on electric fields.
In chapter 4, a general nonlocal operator method is proposed which is applicable for solving partial differential equations (PDEs) of mechanical problems. The nonlocal operator can be regarded as the integral form, ``equivalent'' to the differential form in the sense of a nonlocal interaction model. The variation of a nonlocal operator plays an equivalent role as the derivatives of the shape functions in the meshless methods or those of the finite element method. Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease. The nonlocal operator method is enhanced here also with an operator energy functional to satisfy the linear consistency of the field. A highlight of the present method is the functional derived based on the nonlocal operator can convert the construction of residual and stiffness matrix into a series of matrix multiplications using the predefined nonlocal operators. The nonlocal strong forms of different functionals can be obtained easily via the concept of support and dual-support. Several numerical examples of different types of PDEs are presented.
In chapter 5, we extended the NOM to higher order scheme by using a higher order Taylor series expansion of the unknown field. Such a higher order scheme improves the original NOM in chapter 3 and chapter 4, which can only achieve one-order convergence. The higher order NOM obtains all partial derivatives with specified maximal order simultaneously without resorting to shape functions. The functional based on the nonlocal operators converts the construction of residual and stiffness matrix into a series of matrix multiplication on the nonlocal operator matrix. Several numerical examples solved by strong form or weak form are presented to show the capabilities of this method.
In chapter 6, the NOM proposed as a particle-based method in chapter 3,4,5, has difficulty in imposing accurately the boundary conditions of various orders. In this paper, we converted the particle-based NOM into a scheme with interpolation property. The new scheme describes partial derivatives of various orders at a point by the nodes in the support and takes advantage of the background mesh for numerical integration. The boundary conditions are enforced via the modified variational principle. The particle-based NOM can be viewed a special case of NOM with interpolation property when nodal integration is used. The scheme based on numerical integration greatly improves the stability of the method, as a consequence, the operator energy functional in particle-based NOM is not required. We demonstrated the capabilities of current method by solving the gradient solid problems and comparing the numerical results with the available exact solutions.
In chapter 7, we derived the DS-SPH in solid within the framework of variational principle. The tangent stiffness matrix of SPH can be obtained with ease, and can be served as the basis for the present implicit SPH. We proposed an hourglass energy functional, which allows the direct derivation of hourglass force and hourglass tangent stiffness matrix. The dual-support is {involved} in all derivations based on variational principles and is automatically satisfied in the assembling of stiffness matrix. The implementation of stiffness matrix comprises with two steps, the nodal assembly based on deformation gradient and global assembly on all nodes. Several numerical examples are presented to validate the method.
Für die Verminderung der betonspezifischen CO2-Emissionen wird ein verstärkter Einsatz klinkerreduzierter Zemente bzw. Betone angestrebt. Die Reduzierung des Klinkergehaltes darf jedoch nicht zu einer lebensdauerrelevanten Beeinträchtigung der Betondauerhaftigkeit führen. In diesem Zusammenhang stellt der Frost-Tausalz-Widerstand eine kritische Größe dar, da er bei höheren Klinkersubstitutionsraten häufig negativ beeinflusst wird. Erschwerend kommt hinzu, dass für klinkerreduzierte Betone nur ein unzureichender Erfahrungsschatz vorliegt. Ein hoher Frost-Tausalz-Widerstand kann daher nicht ausschließlich anhand deskriptiver Vorgaben gewährleistet werden. Demgemäß sollte perspektivisch auch für frost-tausalzbeanspruchte Bauteile eine performancebasierte Lebensdauerbetrachtung erfolgen.
Eine unverzichtbare Grundlage für das Erreichen dieser Ziele ist ein Verständnis für die Schadensvorgänge beim Frost-Tausalz-Angriff. Der Forschungsstand ist jedoch geprägt von widersprüchlichen Schadenstheorien. Somit wurde als Zielstellung für diese Arbeit abgeleitet, die existierenden Schadenstheorien unter Berücksichtigung des aktuellen Wissensstandes zu bewerten und mit eigenen Untersuchungen zu prüfen und einzuordnen. Die Sichtung des Forschungsstandes zeigte, dass nur zwei Theorien das Potential haben, den Frost-Tausalz-Angriff umfassend abzubilden – die Glue Spall Theorie und die Cryogenic Suction Theorie.
Die Glue Spall Theorie führt die Entstehung von Abwitterungen auf die mechanische Schädigung der Betonoberfläche durch eine anhaftende Eisschicht zurück. Dabei sollen nur bei moderaten Tausalzkonzentrationen in der einwirkenden Lösung kritische Spannungszustände in der Eisschicht auftreten, die eine Schädigung der Betonoberfläche hervorrufen können. In dieser Arbeit konnte jedoch nachgewiesen werden, dass starke Abwitterungen auch bei Tausalz¬konzentrationen auftreten, bei denen eine mechanische Schädigung des Betons durch das Eis auszuschließen ist. Damit wurde die fehlende Eignung der Glue Spall Theorie aufgezeigt.
Die Cryogenic Suction Theorie fußt auf den eutektischen Eigenschaften von Tausalz-lösungen, die im gefrorenen Zustand immer als Mischung auf festem Wassereis und flüssiger, hochkonzentrierter Salzlösung bestehen, solange ihre Eutektikumstemperatur nicht unter¬schritten wird. Die flüssige Phase im salzhaltigen Eis stellt für gefrorenen Beton ein bisher nicht berücksichtigtes Flüssigkeitsreservoir dar, welches trotz der hohen Salzkonzentration die Eisbildung in der Betonrandzone verstärken und so die Entstehung von Abwitterungen verursachen soll. In dieser Arbeit wurde bestätigt, dass die Eisbildung im Zementstein beim Gefrieren in hochkonzentrierter Tausalzlösung tatsächlich verstärkt wird. Das Ausmaß der zusätzlichen Eisbildung wurde dabei auch von der Fähigkeit des Zementsteins zur Bindung von Chloridionen aus der Tausalzlösung beeinflusst.
Zusammenfassend wurde festgestellt, dass die Cryogenic Suction Theorie eine gute Beschreibung des Frost-Tausalz-Angriffes darstellt, aber um weitere Aspekte ergänzt werden muss. Die Berücksichtigung der intensiven Sättigung von Beton durch den Prozess der Mikroeislinsenpumpe stellt hier die wichtigste Erweiterung dar. Basierend auf dieser Überlegung wurde eine kombinierte Schadenstheorie aufgestellt. Wichtige Annahmen dieser Theorie konnten experimentell bestätigt werden. Im Ergebnis wurde so die Grundlage für ein tiefergehendes Verständnis des Frost-Tausalz-Angriffes geschaffen. Zudem wurde ein neuer Ansatz identifiziert, um die (potentielle) Verringerung des Frost-Tausalz-Widerstandes klinkerreduzierter Betone zu erklären.
Die Auseinandersetzung mit der Digitalisierung ist in den letzten Jahren in den Medien, auf Konferenzen und in Ausschüssen der Bau- und Immobilienbranche angekommen. Während manche Bereiche Neuerungen hervorbringen und einige Akteure als Pioniere zu bezeichnen sind, weisen andere Themen noch Defizite hinsichtlich der digitalen Transformation auf. Zu dieser Kategorie kann auch das Baugenehmigungsverfahren gezählt werden. Unabhängig davon, wie Architekten und Ingenieure in den Planungsbüros auf innovative Methoden setzen, bleiben die Bauvorlagen bisher zuhauf in Papierform oder werden nach der elektronischen Einreichung in der Behörde ausgedruckt. Vorhandene Ressourcen, beispielsweise in Form eines Bauwerksinformationsmodells, die Unterstützung bei der Baugenehmigungsfeststellung bieten können, werden nicht ausgeschöpft. Um mit digitalen Werkzeugen eine Entscheidungshilfe für die Baugenehmigungsbehörden zu erarbeiten, ist es notwendig, den Ist-Zustand zu verstehen und Gegebenheiten zu hinterfragen, bevor eine Gesamtautomatisierung der innerbehördlichen Vorgänge als alleinige Lösung zu verfolgen ist.
Mit einer inhaltlich-organisatorischen Betrachtung der relevanten Bereiche, die Einfluss auf die Baugenehmigungsfeststellung nehmen, wird eine Optimierung des Baugenehmigungsverfahrens in den
Behörden angestrebt. Es werden die komplexen Bereiche, wie die Gesetzeslage, der Einsatz von Technologie aber auch die subjektiven Handlungsalternativen, ermittelt und strukturiert. Mit der Entwicklung eines Modells zur Feststellung der Baugenehmigungsfähigkeit wird sowohl ein Verständnis für Einflussfaktoren vermittelt als auch eine Transparenzsteigerung für alle Beteiligten geschaffen.
Neben einer internationalen Literaturrecherche diente eine empirische Studie als Untersuchungsmethode. Die empirische Studie wurde in Form von qualitativen Experteninterviews durchgeführt, um den Ist-Zustand im Bereich der Baugenehmigungsverfahren festzustellen. Das erhobene Datenmaterial wurde aufbereitet und anschließend einer softwaregestützten Inhaltsanalyse unterzogen. Die Ergebnisse wurden in Kombination mit den Erkenntnissen der Literaturrecherche in verschiedenen Analysen als Modellgrundlage aufgearbeitet.
Ergebnis der Untersuchung stellt ein Entscheidungsmodell dar, welches eine Lücke zwischen den gegenwärtigen
Abläufen in den Baubehörden und einer Gesamtautomatisierung der Baugenehmigungsprüfung schließt. Die prozessorientierte Strukturierung entscheidungsrelevanter Sachverhalte im Modell ermöglicht eine Unterstützung bei der Baugenehmigungsfeststellung für Prüfer und Antragsteller. Das theoretische Modell konnte in Form einer Webanwendung in die Praxis übertragen werden.
In den letzten Jahrzehnten unterlag der Straßenbetriebsdienst tiefgreifenden Veränderungen. Diese Veränderungen schließt auch die betriebliche Steuerungsphilosophie ein, um eine planungsrationale und ökonomische Gestaltung des Straßenbetriebsdienstes zu unterstützen. Dabei erfolgt eine verbindliche Vorgabe der Leistungsinhalte und -umfänge und ermöglicht eine Budgetierung für das vorgesehene Jahresarbeitsprogramm.
Ziel der Untersuchung ist die Entwicklung eines Modells für die Ermittlung von leistungsbezogenen Musterjahresganglinien zur Unterstützung der Jahresarbeitsplanung. Dafür lagen für jede Leistung des Leistungsbereiches „Grünpflege“ jeweils 260 einzelne Jahresganglinien vor.
Im Ergebnis der Untersuchung wird die leistungsbezogene Musterjahresganglinie in vier Schritten ermittelt. Im ersten Schritt erfolgt die Prüfung der Datenqualität; im zweiten Schritt eine Korrelationsanalyse; im dritten Schritt die fachliche Überprüfung der Leistungsausprägung und im vierten Schritt die Ermittlung der leistungsbezogenen Musterjahresganglinie aus den verbliebenen leistungsbezogenen Jahresganglinien.
In recent years, the discussion of digitalization has arrived in the media, at conferences, and in committees of the construction and real estate industry. While some areas are producing innovations and some contributors can be described as pioneers, other topics still show deficits with regard to digital transformation. The building permit process can also be counted in this category. Regardless of how architects and engineers in planning offices rely on innovative methods, building documents have so far remained in paper form in too many cases, or are printed out after electronic submission to the authority. Existing resources – for example in the form of a building information model, which could provide support in the building permit process – are not being taken advantage of. In order to use digital tools to support decision-making by the building permit authorities, it is necessary to understand the current situation and to question conditions before pursuing the overall automation of internal authority processes as the sole solution.
With a substantive-organizational consideration of the relevant areas that influence building permit determination, an improvement of the building permit procedure within authorities is proposed. Complex areas – such as legal situations, the use of technology, as well as the subjective alternative action – are determined and structured. With the development of a model for the determination of building permitability, both an understanding of influencing factors is conveyed and an increase in transparency for all parties involved is created.
In addition to an international literature review, an empirical study served as the research method. The empirical study was conducted in the form of qualitative expert interviews in order to determine the current state in the field of building permit procedures. The collected data material was processed and subsequently subjected to a software-supported content analysis. The results were processed, in combination with findings from the literature review, in various analyses to form the basis for a proposed model.
The result of the study is a decision model that closes the gap between the current processes within the building authorities and an overall automation of the building permit review process. The model offers support to examiners and applicants in determining building permit eligibility, through its process-oriented structuring of decision-relevant facts. The theoretical model could be transferred into practice in the form of a web application.
Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid−structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size.
“How to understand the interaction between urban space and social processes” is a significant question in urban studies. To answer that, the city needs to be recognized as both a physical and a social entity and urban theory and practice need to connect these (Hillier 2007). The present research aims to re-examine the complex correlation between spatial and social inequality manifestations in the city of Tehran regarding the concept of segregation.
It observes the causes and consequences of segregation in Tehran and provides an insight into both concepts of socio-spatial segregation and neighborhood effects and creates a link between them. First, I argue when, where, and for whom spatial locations affect the chances of social networks in Tehran. Then, I discuss how neighborhood effects can emerge via social network mechanisms and thus affect the perceptions of residents in the neighborhoods.
This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level.
This thesis presents the advances and applications of phase field modeling in fracture analysis. In this approach, the sharp crack surface topology in a solid is approximated by a diffusive crack zone governed by a scalar auxiliary variable. The uniqueness of phase field modeling is that the crack paths are automatically determined as part of the solution and no interface tracking is required. The damage parameter varies continuously over the domain. But this flexibility comes with associated difficulties: (1) a very fine spatial discretization is required to represent sharp local gradients correctly; (2) fine discretization results in high computational cost; (3) computation of higher-order derivatives for improved convergence rates and (4) curse of dimensionality in conventional numerical integration techniques. As a consequence, the practical applicability of phase field models is severely limited.
The research presented in this thesis addresses the difficulties of the conventional numerical integration techniques for phase field modeling in quasi-static brittle fracture analysis. The first method relies on polynomial splines over hierarchical T-meshes (PHT-splines) in the framework of isogeometric analysis (IGA). An adaptive h-refinement scheme is developed based on the variational energy formulation of phase field modeling. The fourth-order phase field model provides increased regularity in the exact solution of the phase field equation and improved convergence rates for numerical solutions on a coarser discretization, compared to the second-order model. However, second-order derivatives of the phase field are required in the fourth-order model. Hence, at least a minimum of C1 continuous basis functions are essential, which is achieved using hierarchical cubic B-splines in IGA. PHT-splines enable the refinement to remain local at singularities and high gradients, consequently reducing the computational cost greatly. Unfortunately, when modeling complex geometries, multiple parameter spaces (patches) are joined together to describe the physical domain and there is typically a loss of continuity at the patch boundaries. This decrease of smoothness is dictated by the geometry description, where C0 parameterizations are normally used to deal with kinks and corners in the domain. Hence, the application of the fourth-order model is severely restricted. To overcome the high computational cost for the second-order model, we develop a dual-mesh adaptive h-refinement approach. This approach uses a coarser discretization for the elastic field and a finer discretization for the phase field. Independent refinement strategies have been used for each field.
The next contribution is based on physics informed deep neural networks. The network is trained based on the minimization of the variational energy of the system described by general non-linear partial differential equations while respecting any given law of physics, hence the name physics informed neural network (PINN). The developed approach needs only a set of points to define the geometry, contrary to the conventional mesh-based discretization techniques. The concept of `transfer learning' is integrated with the developed PINN approach to improve the computational efficiency of the network at each displacement step. This approach allows a numerically stable crack growth even with larger displacement steps. An adaptive h-refinement scheme based on the generation of more quadrature points in the damage zone is developed in this framework. For all the developed methods, displacement-controlled loading is considered. The accuracy and the efficiency of both methods are studied numerically showing that the developed methods are powerful and computationally efficient tools for accurately predicting fractures.
In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible.
Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution.
Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance.
Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis.
Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements.
Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction.
For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem.
Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field.
From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element.
As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section.
Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.
This dissertation investigates the interactions between urban form, allocation of activities, and pedestrian movement in the context of urban planning. The ability to assess the long-term impact of urban planning decisions on what people do and how they get there is of central importance, with various disciplines addressing this topic. This study focuses on approaches proposed by urban morphologists, urban economists, and transportation planners, each aiming the attention at a different part of the form-activity-movement interaction. Even though there is no doubt about the advantages of these highly focused approaches, it remains unclear what is the cost of ignoring the effect of some interactions while considering others. The general aim of this dissertation is to empirically test the validity of the individual models and quantify the impact of this isolationist approach on their precision and bias.
For this purpose, we propose a joined form-activity-movement interaction model and conduct an empirical study in Weimar, Germany. We estimate how the urban form and activities affect movement as well as how movement and urban form affect activities. By estimating these effects in isolation and simultaneously, we assess the bias of the individual models.
On the one hand, the empirical study results confirm the significance of all interactions suggested by the individual models. On the other hand, we were able to show that when these interactions are estimated in isolation, the resulting predictions are biased. To conclude, we do not question the knowledge brought by transportation planners, urban morphologists, and urban economists. However, we argue that it might be of little use on its own.
We see the relevance of this study as being twofold. On the one hand, we proposed a novel methodological framework for the simultaneous estimation of the form-activity-movement interactions. On the other hand, we provide empirical evidence about the strengths and limitations of current approaches.
One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel.
To evaluate the results of the Tsallis entropy, GP and ANFIS models, laboratory observations were used in which shear stress was measured using an optimized Preston tube. This is then used to measure the SSD in various aspect ratios in the rectangular channel. To investigate the shear stress percentage, 10 data series with a total of 112 different data for were used. The results of the sensitivity analysis show that the most influential parameter for the SSD in smooth rectangular channel is the dimensionless parameter B/H, Where the transverse coordinate is B, and the flow depth is H. With the parameters (b/B), (B/H) for the bed and (z/H), (B/H) for the wall as inputs, the modeling of the GP was better than the other one. Based on the analysis, it can be concluded that the use of GP and ANFIS algorithms is more effective in estimating shear stress in smooth rectangular channels than the Tsallis entropy-based equations.
Die Arbeit leistet einen wissenschaftlichen Beitrag zur Erforschung der Einsatzmöglichkeiten eines Immobilienportfoliomanagements für öffentliche museale Schlösserverwaltungen in Deutschland. Insbesondere wird ein für deren Organisation spezifisches Modell zur Investitionssteuerung herausgearbeitet und dessen Anwendbarkeit in der Praxis mit Experten diskutiert.
Accurate prediction of stable alluvial hydraulic geometry, in which erosion and sedimentation are in equilibrium, is one of the most difficult but critical topics in the field of river engineering. Data mining algorithms have been gaining more attention in this field due to their high performance and flexibility. However, an understanding of
the potential for these algorithms to provide fast, cheap, and accurate predictions of hydraulic geometry is lacking. This study provides the first quantification of this potential. Using at-a-station field data, predictions of flow depth, water-surface width and longitudinal water surface slope are made using three standalone data mining techniques -, Instance-based Learning (IBK), KStar, Locally Weighted Learning (LWL) - along with four types of novel hybrid algorithms in which the standalone models are trained with Vote, Attribute Selected
Classifier (ASC), Regression by Discretization (RBD), and Cross-validation Parameter Selection (CVPS) algorithms (Vote-IBK, Vote-Kstar, Vote-LWL, ASC-IBK, ASC-Kstar, ASC-LWL, RBD-IBK, RBD-Kstar, RBD-LWL, CVPSIBK, CVPS-Kstar, CVPS-LWL). Through a comparison of their predictive performance and a sensitivity analysis of the driving variables, the results reveal: (1) Shield stress was the most effective parameter in the prediction of all geometry dimensions; (2) hybrid models had a higher prediction power than standalone data mining models,
empirical equations and traditional machine learning algorithms; (3) Vote-Kstar model had the highest performance in predicting depth and width, and ASC-Kstar in estimating slope, each providing very good prediction performance. Through these algorithms, the hydraulic geometry of any river can potentially be predicted accurately and with ease using just a few, readily available flow and channel parameters. Thus, the results reveal that these models have great potential for use in stable channel design in data poor catchments, especially in developing nations where technical modelling skills and understanding of the hydraulic and sediment processes occurring in the river system may be lacking.
The concept of information entropy together with the principle of maximum entropy to open channel flow is essentially based on some physical consideration of the problem under consideration. This paper is a discussion on Yeganeh and Heidari (2020)’s paper, who proposed a new approach for measuring vertical distribution of streamwise velocity in open channels. The discussers argue that their approach is conceptually incorrect and thus leads to a physically unrealistic situation. In addition, the discussers found some wrong mathematical expressions (which are assumed to be typos) written in the paper, and also point out that the authors did not cite some of the original papers on the topic.
Complex vortex flow patterns around bridge piers, especially during floods, cause scour process that can result in the failure of foundations. Abutment scour is a complex three-dimensional phenomenon that is difficult to predict especially with traditional formulas obtained using empirical approaches such as regressions. This paper presents a test of a standalone Kstar model with five novel hybrid algorithm of bagging (BA-Kstar), dagging (DA-Kstar), random committee (RC-Kstar), random subspace (RS-Kstar), and weighted instance handler wrapper (WIHWKstar) to predict scour depth (ds) for clear water condition. The dataset consists of 99 scour depth data from flume experiments (Dey and Barbhuiya, 2005) using abutment shapes such as vertical, semicircular and 45◦ wing. Four dimensionless parameter of relative flow depth (h/l), excess abutment Froude number (Fe), relative sediment size (d50/l) and relative submergence (d50/h) were considered for the prediction of relative scour depth (ds/l). A portion of the dataset was used for the calibration (70%), and the remaining used for model validation. Pearson correlation coefficients helped deciding relevance of the input parameters combination and finally four different combinations of input parameters were used. The performance of the models was assessed visually and with quantitative metrics. Overall, the best input combination for vertical abutment shape is the combination of Fe, d50/l and h/l, while for semicircular and 45◦ wing the combination of the Fe and d50/l is the most effective input parameter combination. Our results show that incorporating Fe, d50/l and h/l lead to higher performance while involving d50/h reduced the models prediction power for vertical abutment shape and for semicircular and 45◦ wing involving h/l and d50/h lead to more error. The WIHW-Kstar provided the highest performance in scour depth prediction around vertical abutment shape while RC-Kstar model outperform of other models for scour depth prediction around semicircular and 45◦ wing.
The Finite Element Method (FEM) is widely used in engineering for solving Partial Differential Equations (PDEs) over complex geometries. To this end, it is required to provide the FEM software with a geometric model that is typically constructed in a Computer-Aided Design (CAD) software. However, FEM and CAD use different approaches for the mathematical description of the geometry. Thus, it is required to generate a mesh, which is suitable for FEM, based on the CAD model. Nonetheless, this procedure is not a trivial task and it can be time consuming. This issue becomes more significant for solving shape and topology optimization problems, which consist in evolving the geometry iteratively. Therefore, the computational cost associated to the mesh generation process is increased exponentially for this type of applications.
The main goal of this work is to investigate the integration of CAD and CAE in shape and topology optimization. To this end, numerical tools that close the gap between design and analysis are presented. The specific objectives of this work are listed below:
• Automatize the sensitivity analysis in an isogeometric framework for applications in shape optimization. Applications for linear elasticity are considered.
• A methodology is developed for providing a direct link between the CAD model and the analysis mesh. In consequence, the sensitivity analysis can be performed in terms of the design variables located in the design model.
• The last objective is to develop an isogeometric method for shape and topological optimization. This method should take advantage of using Non-Uniform Rational B-Splines (NURBS) with higher continuity as basis functions.
Isogeometric Analysis (IGA) is a framework designed to integrate the design and analysis in engineering problems. The fundamental idea of IGA is to use the same basis functions for modeling the geometry, usually NURBS, for the approximation of the solution fields. The advantage of integrating design and analysis is two-fold. First, the analysis stage is more accurate since the system of PDEs is not solved using an approximated geometry, but the exact CAD model. Moreover, providing a direct link between the design and analysis discretizations makes possible the implementation of efficient sensitivity analysis methods. Second, the computational time is significantly reduced because the mesh generation process can be avoided.
Sensitivity analysis is essential for solving optimization problems when gradient-based optimization algorithms are employed. Automatic differentiation can compute exact gradients, automatically by tracking the algebraic operations performed on the design variables. For the automation of the sensitivity analysis, an isogeometric framework is used. Here, the analysis mesh is obtained after carrying out successive refinements, while retaining the coarse geometry for the domain design. An automatic differentiation (AD) toolbox is used to perform the sensitivity analysis. The AD toolbox takes the code for computing the objective and constraint functions as input. Then, using a source code transformation approach, it outputs a code for computing the objective and constraint functions, and their sensitivities as well. The sensitivities obtained from the sensitivity propagation method are compared with analytical sensitivities, which are computed using a full isogeometric approach.
The computational efficiency of AD is comparable to that of analytical sensitivities. However, the memory requirements are larger for AD. Therefore, AD is preferable if the memory requirements are satisfied. Automatic sensitivity analysis demonstrates its practicality since it simplifies the work of engineers and designers.
Complex geometries with sharp edges and/or holes cannot easily be described with NURBS. One solution is the use of unstructured meshes. Simplex-elements (triangles and tetrahedra for two and three dimensions respectively) are particularly useful since they can automatically parameterize a wide variety of domains. In this regard, unstructured Bézier elements, commonly used in CAD, can be employed for the exact modelling of CAD boundary representations. In two dimensions, the domain enclosed by NURBS curves is parameterized with Bézier triangles. To describe exactly the boundary of a two-dimensional CAD model, the continuity of a NURBS boundary representation is reduced to C^0. Then, the control points are used to generate a triangulation such that the boundary of the domain is identical to the initial CAD boundary representation. Thus, a direct link between the design and analysis discretizations is provided and the sensitivities can be propagated to the design domain.
In three dimensions, the initial CAD boundary representation is given as a collection of NURBS surfaces that enclose a volume. Using a mesh generator (Gmsh), a tetrahedral mesh is obtained. The original surface is reconstructed by modifying the location of the control points of the tetrahedral mesh using Bézier tetrahedral elements and a point inversion algorithm. This method offers the possibility of computing the sensitivity analysis using the analysis mesh. Then, the sensitivities can be propagated into the design discretization. To reuse the mesh originally generated, a moving Bézier tetrahedral mesh approach was implemented.
A gradient-based optimization algorithm is employed together with a sensitivity propagation procedure for the shape optimization cases. The proposed shape optimization approaches are used to solve some standard benchmark problems in structural mechanics. The results obtained show that the proposed approach can compute accurate gradients and evolve the geometry towards optimal solutions. In three dimensions, the moving mesh approach results in faster convergence in terms of computational time and avoids remeshing at each optimization step.
For considering topological changes in a CAD-based framework, an isogeometric phase-field based shape and topology optimization is developed. In this case, the diffuse interface of a phase-field variable over a design domain implicitly describes the boundaries of the geometry. The design variables are the local values of the phase-field variable. The descent direction to minimize the objective function is found by using the sensitivities of the objective function with respect to the design variables. The evolution of the phase-field is determined by solving the time dependent Allen-Cahn equation.
Especially for topology optimization problems that require C^1 continuity, such as for flexoelectric structures, the isogeometric phase field method is of great advantage. NURBS can achieve the desired continuity more efficiently than the traditional employed functions. The robustness of the method is demonstrated when applied to different geometries, boundary conditions, and material configurations. The applications illustrate that compared to piezoelectricity, the electrical performance of flexoelectric microbeams is larger under bending. In contrast, the electrical power for a structure under compression becomes larger with piezoelectricity.
BIM-basierte Digitalisierung von Bestandsgebäuden aus Sicht des FM am Beispiel von Heizungsanlagen
(2022)
Das Ziel der Arbeit ist, für das Facility Management relevante Informationen für die mit Building Information Modeling basierende Erstellung von Bestandsgebäuden am Beispiel einer Hei- zungsanlage zu definieren. Darauf basierend sind die notwendigen Arbeitsschritte der Objek- taufnahme abgeleitet. Für die Definition der Arbeitsschritte wurden das grundlegende Vorge- hen bei einer Objektaufnahme sowie die gesetzlichen Gegebenheiten für den Betrieb einer Heizungsanlage dargelegt. Darüber hinaus sind in der vorliegenden Ausarbeitung die Vorteile und Herausforderungen hinsichtlich des Zusammenspiels von Building Information Modeling und Facility Management analysiert. Die definierten Arbeitsschritte sind anhand eines Beispiel- projektes angewendet worden. Im Rahmen des Beispielprojekts sind die entscheidenden Be- triebsdaten je Anlagenteil in Form von Informationsanforderungen nach DIN 17412 definiert. Das Gebäudemodell ist durch Parameter mit den für das Facility Management relevanten In- formationen ergänzt. Die Resultate des Beispielprojektes sind mit aussagekräftigen Schnitten, Plänen sowie 3-D-Visualisierungen dargestellt. Abschließend sind die Ergebnisse in Bezug auf das FM validiert. Aus den Arbeitsschritten und Ergebnissen ist eine Leitlinie erstellt worden für den Digitalisierungsprozess von Bestandsgebäuden für das Facility Management.
Quantification of cracks in concrete thin sections considering current methods of image analysis
(2022)
Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze-thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones.
Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons.
Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form.
The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows:
-The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method.
-A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires $C^1$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation.
-A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved.
In machine learning, if the training data is independently and identically distributed as the test data then a trained model can make an accurate predictions for new samples of data. Conventional machine learning has a strong dependence on massive amounts of training data which are domain specific to understand their latent patterns. In contrast, Domain adaptation and Transfer learning methods are sub-fields within machine learning that are concerned with solving the inescapable problem of insufficient training data by relaxing the domain dependence hypothesis. In this contribution, this issue has been addressed and by making a novel combination of both the methods we develop a computationally efficient and practical algorithm to solve boundary value problems based on nonlinear partial differential equations. We adopt a meshfree analysis framework to integrate the prevailing geometric modelling techniques based on NURBS and present an enhanced deep collocation approach that also plays an important role in the accuracy of solutions. We start with a brief introduction on how these methods expand upon this framework. We observe an excellent agreement between these methods and have shown that how fine-tuning a pre-trained network to a specialized domain may lead to an outstanding performance compare to the existing ones. As proof of concept, we illustrate the performance of our proposed model on several benchmark problems.
Tropical coral reefs, one of the world’s oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling.
The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts.
Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem.
For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation – two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012–today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time.
In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs – demonstrating the feasibility of digitally designing such ‘living architecture’ according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation – not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them.
Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design.
In this work, we present a deep collocation method (DCM) for three-dimensional potential problems in non-homogeneous media. This approach utilizes a physics-informed neural network with material transfer learning reducing the solution of the non-homogeneous partial differential equations to an optimization problem. We tested different configurations of the physics-informed neural network including smooth activation functions, sampling methods for collocation points generation and combined optimizers. A material transfer learning technique is utilized for non-homogeneous media with different material gradations and parameters, which enhance the generality and robustness of the proposed method. In order to identify the most influential parameters of the network configuration, we carried out a global sensitivity analysis. Finally, we provide a convergence proof of our DCM. The approach is validated through several benchmark problems, also testing different material variations.
The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept.
To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory.
The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown.
The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste.
Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally.
As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content.
In recent years, lightweight materials, such as polymer composite materials (PNCs) have been studied and developed due to their excellent physical and chemical properties. Structures composed of these composite materials are widely used in aerospace engineering structures, automotive components, and electrical devices. The excellent and outstanding mechanical, thermal, and electrical properties of Carbon nanotube (CNT) make it an ideal filler to strengthen polymer materials’ comparable properties. The heat transfer of composite materials has very promising engineering applications in many fields, especially in electronic devices and energy storage equipment. It is essential in high-energy density systems since electronic components need heat dissipation functionality. Or in other words, in electronic devices the generated heat should ideally be dissipated by light and small heat sinks.
Polymeric composites consist of fillers embedded in a polymer matrix, the first ones will significantly affect the overall (macroscopic) performance of the material. There are many common carbon-based fillers such as single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), carbon nanobuds (CNB), fullerene, and graphene. Additives inside the matrix have become a popular subject for researchers. Some extraordinary characters, such as high-performance load, lightweight design, excellent chemical resistance, easy processing, and heat transfer, make the design of polymeric nanotube composites (PNCs) flexible. Due to the reinforcing effects with different fillers on composite materials, it has a higher degree of freedom and can be designed for the structure according to specific applications’ needs. As already stated, our research focus will be on SWCNT enhanced PNCs. Since experiments are timeconsuming, sometimes expensive and cannot shed light into phenomena taking place for instance at the interfaces/interphases of composites, they are often complemented through theoretical and computational analysis.
While most studies are based on deterministic approaches, there is a comparatively lower number of stochastic methods accounting for uncertainties in the input parameters. In deterministic models, the output of the model is fully determined by the parameter values and the initial conditions. However, uncertainties in the input parameters such as aspect ratio, volume fraction, thermal properties of fiber and matrix need to be taken into account for reliable predictions. In this research, a stochastic multiscale method is provided to study the influence of numerous uncertain input parameters on the thermal conductivity of the composite. Therefore, a hierarchical multi-scale method based on computational homogenization is presented in to predict the macroscopic thermal conductivity based on the fine-scale structure. In order to study the inner mechanism, we use the finite element method and employ surrogate models to conduct a Global Sensitivity Analysis (GSA). The SA is performed in order to quantify the influence of the conductivity of the fiber, matrix, Kapitza resistance, volume fraction and aspect ratio on the macroscopic conductivity. Therefore, we compute first-order and total-effect sensitivity indices with different surrogate models.
As stochastic multiscale models are computational expensive, surrogate approaches are commonly exploited. With the emergence of high performance computing and artificial intelligence, machine learning has become a popular modeling tool for numerous applications. Machine learning (ML) is commonly used in regression and maps data through specific rules with algorithms to build input and output models. They are particularly useful for nonlinear input-output relationships when sufficient data is available. ML has also been used in the design of new materials and multiscale analysis. For instance, Artificial neural networks and integrated learning seem to be ideally for such a task. They can theoretically simulate any non-linear relationship through the connection of neurons. Mapping relationships are employed to carry out data-driven simulations of inputs and outputs in stochastic modeling.
This research aims to develop a stochastic multi-scale computational models of PNCs in heat transfer. Multi-scale stochastic modeling with uncertainty analysis and machine learning methods consist of the following components:
-Uncertainty Analysis. A surrogate based global sensitivity analysis is coupled with a hierarchical multi-scale method employing computational homogenization. The effect of the conductivity of the fibers and the matrix, the Kapitza resistance, volume fraction and aspect ratio on the ’macroscopic’ conductivity of the composite is systematically studied. All selected surrogate models yield consistently the conclusions that the most influential input parameters are the aspect ratio followed by the volume fraction. The Kapitza Resistance has no significant effect on the thermal conductivity of the PNCs. The most accurate surrogate model in terms of the R2 value is the moving least square (MLS).
-Hybrid Machine Learning Algorithms. A combination of artificial neural network (ANN) and particle swarm optimization (PSO) is applied to estimate the relationship between variable input and output parameters. The ANN is used for modeling the composite while PSO improves the prediction performance through an optimized global minimum search. The thermal conductivity of the fibers and the matrix, the kapitza resistance, volume fraction and aspect ratio are selected as input parameters. The output is the macroscopic (homogenized) thermal conductivity of the composite. The results show that the PSO significantly improves the predictive ability of this hybrid intelligent algorithm, which outperforms traditional neural networks.
-Stochastic Integrated Machine Learning. A stochastic integrated machine learning based multiscale approach for the prediction of the macroscopic thermal conductivity in PNCs is developed. Seven types of machine learning models are exploited in this research, namely Multivariate Adaptive Regression Splines (MARS), Support Vector Machine (SVM), Regression Tree (RT), Bagging Tree (Bag), Random Forest (RF), Gradient Boosting Machine (GBM) and Cubist. They are used as components of stochastic modeling to construct the relationship between the variable of the inputs’ uncertainty and the macroscopic thermal conductivity of PNCs. Particle Swarm Optimization (PSO) is used for hyper-parameter tuning to find the global optimal values leading to a significant reduction in the computational cost. The advantages and disadvantages of various methods are also analyzed in terms of computing time and model complexity to finally give a recommendation for the applicability of different models.
The detailed structural analysis of thin-walled circular pipe members often requires the use of a shell or solid-based finite element method. Although these methods provide a very good approximation of the deformations, they require a higher degree of discretization which causes high computational costs. On the other hand, the analysis of thin-walled circular pipe members based on classical beam theories is easy to implement and needs much less computation time, however, they are limited in their ability to approximate the deformations as they cannot consider the deformation of the cross-section.
This dissertation focuses on the study of the Generalized Beam Theory (GBT) which is both accurate and efficient in analyzing thin-walled members. This theory is based on the separation of variables in which the displacement field is expressed as a combination of predetermined deformation modes related to the cross-section, and unknown amplitude functions defined on the beam's longitudinal axis. Although the GBT was initially developed for long straight members, through the consideration of complementary deformation modes, which amend the null transverse and shear membrane strain assumptions of the classical GBT, problems involving short members, pipe bends, and geometrical nonlinearity can also be analyzed using GBT. In this dissertation, the GBT formulation for the analysis of these problems is developed and the application and capabilities of the method are illustrated using several numerical examples. Furthermore, the displacement and stress field results of these examples are verified using an equivalent refined shell-based finite element model.
The developed static and dynamic GBT formulations for curved thin-walled circular pipes are based on the linear kinematic description of the curved shell theory. In these formulations, the complex problem in pipe bends due to the strong coupling effect of the longitudinal bending, warping and the cross-sectional ovalization is handled precisely through the derivation of the coupling tensors between the considered GBT deformation modes. Similarly, the geometrically nonlinear GBT analysis is formulated for thin-walled circular pipes based on the nonlinear membrane kinematic equations. Here, the initial linear and quadratic stress and displacement tangent stiffness matrices are built using the third and fourth-order GBT deformation mode coupling tensors.
Longitudinally, the formulation of the coupled GBT element stiffness and mass matrices are presented using a beam-based finite element formulation. Furthermore, the formulated GBT elements are tested for shear and membrane locking problems and the limitations of the formulations regarding the membrane locking problem are discussed.
Inhaltlich beschäftigt sich die Arbeit, die im Rahmen des Promotionsstudiengangs Kunst und Gestaltung an der Bauhaus-Universität entstand, mit der Erforschung sozio-interaktiver Potentiale der Videotelefonie im Kontext von Nähe und Verbundenheit mit Fokus auf Eigenbild, Embodiment sowie den Rederechtswechsel.
Die Videotelefonie als Kommunikationsform hat sich – und darauf deuten die Erfahrungen der Co- vid-19-Pandemie hin – im lebensweltlichen Alltag der Menschen etabliert und wird dort in naher Zukunft nicht mehr wegzudenken sein. Auf Basis ihrer Möglichkeiten und Errungenschaften ist es inzwischen Realität und Lebenswirklichkeit, dass die Kommunikation sowohl im privaten als auch im geschäftlichen Kontext mittels verschiedenster Kanäle stattfindet. Der Videotelefonie kommt hierbei als solche nicht nur eine tragende Funktion, sondern auch eine herausragende Rolle bei der vermeintlichen Reproduktion der Face-to-Face-Kommunikation im digitalen Raum zu und wird wie selbstverständlich zum zwischenmenschlichen Austausch genutzt. Just an diesem Punkt knüpft die Forschungsarbeit an. Zentral stand dabei das Vorhaben einer dezidierte Untersuchung des Forschungsgegenstandes Videotelefonie, sowohl aus Kultur- als auch Technikhistorischer, aber auch Medien-, Wahrnehmungs- wie Kommunikations- theoretischer Perspektive, indem analytische und phänosemiotische Perspektiven miteinander in Beziehung gesetzt werden (z.B. Wahrnehmungsbedingungen, Interaktionsmerkmale, realisierte Kommunikationsprozesse etc.). Damit verbundenes, wünschenswertes Ziel war es, eine möglichst zeitgemäße wie relevante Forschungsfrage zu adressieren, die neben den kulturellen Technisierungs- und Mediatisierungstendenzen in institutionellen und privaten Milieus ebenfalls eine conditio sine qua non der pandemischen (Massen-)Kommunikation entwirft.
Die Arbeit ist damit vor allem im Bereich des Produkt- und Interactiondesigns zu verorten. Darüber hinaus hatte sie das Ziel der Darlegung und Begründung der Videotelefonie als eigenständige Kommunikationsform, welche durch eigene, kommunikative Besonderheiten, die sich in ihrer jeweiligen Ingebrauchnahme sowie durch spezielle Wahrnehmungsbedingungen äußern, und die die Videotelefonie als »Rederechtswechselmedium« avant la lettre konsolidieren, gekennzeichnet ist. Dabei sollte der Beweis erbracht werden, dass die Videotelefonie nicht als Schwundstufe einer Kommunikation Face-to-Face, sondern als ein eigenständiges Mediatisierungs- und Kommunikationsereignis zu verstehen sei. Und eben nicht als eine beliebige – sich linear vom Telefon ausgehende – entwickelte Form der audio-visuellen Fernkommunikation darstellt, sondern die gestalterische (Bewegtbild-)Technizität ein eigenständiges Funktionsmaß offeriert, welches wiederum ein innovatives Kommunikationsmilieu im Kontext einer Rederechtswechsel-Medialität stabilisiert.
For the safe and efficient operation of dams, frequent monitoring and maintenance are required. These are usually expensive, time consuming, and cumbersome. To alleviate these issues, we propose applying a wave-based scheme for the location and quantification of damages in dams.
To obtain high-resolution “interpretable” images of the damaged regions, we drew inspiration from non-linear full-multigrid methods for inverse problems and applied a new cyclic multi-stage full-waveform inversion (FWI) scheme. Our approach is less susceptible to the stability issues faced by the standard FWI scheme when dealing with ill-posed problems. In this paper, we first selected an optimal acquisition setup and then applied synthetic data to demonstrate the capability of our approach in identifying a series of anomalies in dams by a mixture of reflection and transmission tomography. The results had sufficient robustness, showing the prospects of application in the field of non-destructive testing of dams.
In this work, the degradation performance for the photocatalytic oxidation of eight micropollutants (amisulpride, benzotriazole, candesartan, carbamazepine, diclofenac, gabapentin, methlybenzotriazole, and metoprolol) within real secondary effluent was investigated using three different reactor designs. For all reactor types, the influence of irradiation power on its reaction rate and energetic efficiency was investigated. Flat cell and batch reactor showed almost similar substance specific degradation behavior. Within the immersion rotary body reactor, benzotriazole and methylbenzotriazole showed a significantly lower degradation affinity. The flat cell reactor achieved the highest mean degradation rate, with half time values ranging from 5 to 64 min with a mean of 18 min, due to its high catalysts surface to hydraulic volume ratio. The EE/O values were calculated for all micro-pollutants as well as the mean degradation rate constant of each experimental step. The lowest substance specific energy per order (EE/O) values of 5 kWh/m3 were measured for benzotriazole within the batch reactor. The batch reactor also reached the lowest mean values (11.8–15.9 kWh/m3) followed by the flat cell reactor (21.0–37.0 kWh/m3) and immersion rotary body reactor (23.9–41.0 kWh/m3). Catalyst arrangement and irradiation power were identified as major influences on the energetic performance of the reactors. Low radiation intensities as well as the use of submerged catalyst arrangement allowed a reduction in energy demand by a factor of 3–4. A treatment according to existing treatment goals of wastewater treatment plants (80% total degradation) was achieved using the batch reactor with a calculated energy demand of 7000 Wh/m3.
Bolted connections are widely employed in structures like transmission poles, wind turbines, and television (TV) towers. The behaviour of bolted connections is often complex and plays a significant role in the overall dynamic characteristics of the structure. The goal of this work is to conduct a fatigue lifecycle assessment of such a bolted connection block of a 193 m tall TV tower, for which 205 days of real measurement data have been obtained from the installed monitoring devices. Based on the recorded data, the best-fit stochastic wind distribution for 50 years, the decisive wind action, and the locations to carry out the fatigue analysis have been decided. A 3D beam model of the entire tower is developed to extract the nodal forces corresponding to the connection block location under various mean wind speeds, which is later coupled with a detailed complex finite element model of the connection block, with over three million degrees of freedom, for acquiring stress histories on some pre-selected bolts. The random stress histories are analysed using the rainflow counting algorithm (RCA) and the damage is estimated using Palmgren-Miner's damage accumulation law. A modification is proposed to integrate the loading sequence effect into the RCA, which otherwise is ignored, and the differences between the two RCAs are investigated in terms of the accumulated damage.
A safe and economic structural design based on the semi-probabilistic concept requires statistically representative safety elements, such as characteristic values, design values, and partial safety factors. Regarding climate loads, the safety levels of current design codes strongly reflect experiences based on former measurements and investigations assuming stationary conditions, i.e. involving constant frequencies and intensities. However, due to climate change, occurrence of corresponding extreme weather events is expected to alter in the future influencing the reliability and safety of structures and their components. Based on established approaches, a systematically refined data-driven methodology for the determination of design parameters considering nonstationarity as well as standardized targets of structural reliability or safety, respectively, is therefore proposed. The presented procedure picks up fundamentals of European standardization and extends them with respect to nonstationarity by applying a shifting time window method. Taking projected snow loads into account, the application of the method is exemplarily demonstrated and various influencing parameters are discussed.
Design-related reassessment of structures integrating Bayesian updating of model safety factors
(2022)
In the semi-probabilistic approach of structural design, the partial safety factors are defined by considering some degree of uncertainties to actions and resistance, associated with the parameters’ stochastic nature. However, uncertainties for individual structures can be better examined by incorporating measurement data provided by sensors from an installed health monitoring scheme. In this context, the current study proposes an approach to revise the partial safety factor for existing structures on the action side, γE by integrating Bayesian model updating. A simple numerical example of a beam-like structure with artificially generated measurement data is used such that the influence of different sensor setups and data uncertainties on revising the safety factors can be investigated. It is revealed that the health monitoring system can reassess the current capacity reserve of the structure by updating the design safety factors, resulting in a better life cycle assessment of structures. The outcome is furthermore verified by analysing a real life small railway steel bridge ensuring the applicability of the proposed method to practical applications.
The seismic vulnerability assessment of existing reinforced concrete (RC) buildings is a significant source of disaster mitigation plans and rescue services. Different countries evolved various Rapid Visual Screening (RVS) techniques and methodologies to deal with the devastating consequences of earthquakes on the structural characteristics of buildings and human casualties. Artificial intelligence (AI) methods, such as machine learning (ML) algorithm-based methods, are increasingly used in various scientific and technical applications. The investigation toward using these techniques in civil engineering applications has shown encouraging results and reduced human intervention, including uncertainties and biased judgment. In this study, several known non-parametric algorithms are investigated toward RVS using a dataset employing different earthquakes. Moreover, the methodology encourages the possibility of examining the buildings’ vulnerability based on the factors related to the buildings’ importance and exposure. In addition, a web-based application built on Django is introduced. The interface is designed with the idea to ease the seismic vulnerability investigation in real-time. The concept was validated using two case studies, and the achieved results showed the proposed approach’s potential efficiency
Das Ziel der Arbeit ist, eine mögliche Verbesserung der Güte der Lebensdauervorhersage für Gusseisenwerkstoffe mit Kugelgraphit zu erreichen, wobei die Gießprozesse verschiedener Hersteller berücksichtigt werden.
Im ersten Schritt wurden Probenkörper aus GJS500 und GJS600 von mehreren Gusslieferanten gegossen und daraus Schwingproben erstellt.
Insgesamt wurden Schwingfestigkeitswerte der einzelnen gegossenen Proben sowie der Proben des Bauteils von verschiedenen Gussherstellern weltweit entweder durch direkte Schwingversuche oder durch eine Sammlung von Betriebsfestigkeitsversuchen bestimmt.
Dank der metallografischen Arbeit und Korrelationsanalyse konnten drei wesentliche Parameter zur Bestimmung der lokalen Dauerfestigkeit festgestellt werden: 1. statische Festigkeit, 2. Ferrit- und Perlitanteil der Mikrostrukturen und 3. Kugelgraphitanzahl pro Flächeneinheit.
Basierend auf diesen Erkenntnissen wurde ein neues Festigkeitsverhältnisdiagramm (sogenanntes Sd/Rm-SG-Diagramm) entwickelt.
Diese neue Methodik sollte vor allem ermöglichen, die Bauteildauerfestigkeit auf der Grundlage der gemessenen oder durch eine Gießsimulation vorhersagten lokalen Zugfestigkeitswerte sowie Mikrogefügenstrukturen besser zu prognostizieren.
Mithilfe der Versuche sowie der Gießsimulation ist es gelungen, unterschiedliche Methoden der Lebensdauervorhersage unter Berücksichtigung der Herstellungsprozesse weiterzuentwickeln.