56.03 Methoden im Bauingenieurwesen
Refine
Document Type
- Article (143) (remove)
Institute
Keywords
- Bautechnik (21)
- Produktmodell (20)
- Simulation (20)
- Finite-Elemente-Methode (17)
- Lernendes System (15)
- Mehragentensystem (14)
- Modellierung (13)
- Physikalisches Verfahren (11)
- Bauwerk (9)
- CAD (8)
Identification of modal parameters of a space frame structure is a complex assignment due to a large number of degrees of freedom, close natural frequencies, and different vibrating mechanisms. Research has been carried out on the modal identification of rather simple truss structures. So far, less attention has been given to complex three-dimensional truss structures. This work develops a vibration-based methodology for determining modal information of three-dimensional space truss structures. The method uses a relatively complex space truss structure for its verification. Numerical modelling of the system gives modal information about the expected vibration behaviour. The identification process involves closely spaced modes that are characterised by local and global vibration mechanisms. To distinguish between local and global vibrations of the system, modal strain energies are used as an indicator. The experimental validation, which incorporated a modal analysis employing the stochastic subspace identification method, has confirmed that considering relatively high model orders is required to identify specific mode shapes. Especially in the case of the determination of local deformation modes of space truss members, higher model orders have to be taken into account than in the modal identification of most other types of structures.
In this paper, we present an open-source code for the first-order and higher-order nonlocal operator method (NOM) including a detailed description of the implementation. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combined with the method of weighed residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. The implementation in this paper is focused on linear elastic solids for sake of conciseness through the NOM can handle more complex nonlinear problems. The NOM can be very flexible and efficient to solve partial differential equations (PDEs), it’s also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Finally, we present some classical benchmark problems including the classical cantilever beam and plate-with-a-hole problem, and we also make an extension of this method to solve complicated problems including phase-field fracture modeling and gradient elasticity material.
In this study, we propose a nonlocal operator method (NOM) for the dynamic analysis of (thin) Kirchhoff plates. The nonlocal Hessian operator is derived based on a second-order Taylor series expansion. The NOM does not require any shape functions and associated derivatives as ’classical’ approaches such as FEM, drastically facilitating the implementation. Furthermore, NOM is higher order continuous, which is exploited for thin plate analysis that requires C1 continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for the time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation.
Electric trains are considered one of the most eco-friendly and safest means of transportation. Catenary poles are used worldwide to support overhead power lines for electric trains. The performance of the catenary poles has an extensive influence on the integrity of the train systems and, consequently, the connected human services. It became a must nowadays to develop SHM systems that provide the instantaneous status of catenary poles in- service, making the decision-making processes to keep or repair the damaged poles more feasible. This study develops a data-driven, model-free approach for status monitoring of cantilever structures, focusing on pre-stressed, spun-cast ultrahigh-strength concrete catenary poles installed along high-speed train tracks. The pro-posed approach evaluates multiple damage features in an unfied damage index, which leads to straightforward interpretation and comparison of the output. Besides, it distinguishes between multiple damage scenarios of the poles, either the ones caused by material degradation of the concrete or by the cracks that can be propagated during the life span of the given structure. Moreover, using a logistic function to classify the integrity of structure avoids the expensive learning step in the existing damage detection approaches, namely, using the modern machine and deep learning methods. The findings of this study look very promising when applied to other types of cantilever structures, such as the poles that support the power transmission lines, antenna masts, chimneys, and wind turbines.
This study proposes an efficient Bayesian, frequency-based damage identification approach to identify damages in cantilever structures with an acceptable error rate, even at high noise levels. The catenary poles of electric high-speed train systems were selected as a realistic case study to cover the objectives of this study. Compared to other frequency-based damage detection approaches described in the literature, the proposed approach is efficiently able to detect damages in cantilever structures to higher levels of damage detection, namely identifying both the damage location and severity using a low-cost structural health monitoring (SHM) system with a limited number of sensors; for example, accelerometers. The integration of Bayesian inference, as a stochastic framework, in the proposed approach, makes it possible to utilize the benefit of data fusion in merging the informative data from multiple damage features, which increases the quality and accuracy of the results. The findings provide the decision-maker with the information required to manage the maintenance, repair, or replacement procedures.
Für eine Abschätzung des Heizwärmebedarfs von Gebäuden und Quartieren können thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Gebäudemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Bauplänen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Spätere bauliche Veränderungen des Gebäudes müssen häufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zusätzlich erhöht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einflüsse gegeben sind. Die Verknüpfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte überführbar. Mithilfe des Building Information Modeling (BIM) können Simulationsdaten sowohl konsistent gespeichert als auch über Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierfür wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten Übergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen ermöglicht. Dabei werden geometrische und physikalische Parameter direkt aus einem über den gesamten Lebenszyklus aktuellen Gebäudemodell extrahiert und an die Simulation übergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Gebäudemodellierung und nach späteren baulichen Veränderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollständige Übertragbarkeit der Eingangs- und Ausgangswerte sicher.
Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products. By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data.
Für eine Abschätzung des Heizwärmebedarfs von Gebäuden und Quartieren können thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Gebäudemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Bauplänen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Spätere bauliche Veränderungen des Gebäudes müssen häufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zusätzlich erhöht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einflüsse gegeben sind. Die Verknüpfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte überführbar.
Mithilfe des Building Information Modeling (BIM) können Simulationsdaten sowohl konsistent gespeichert als auch über Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierfür wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten Übergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen ermöglicht. Dabei werden geometrische und physikalische Parameter direkt aus einem über den gesamten Lebenszyklus aktuellen Gebäudemodell extrahiert und an die Simulation übergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Gebäudemodellierung und nach späteren baulichen Veränderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollständige Übertragbarkeit der Eingangs- und Ausgangswerte sicher.
Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products.
By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data.
Building Information Modeling is a powerful tool for the design and for a consistent set of data in a virtual storage. For the application in the phases of realization and on site it needs further development. The paper describes main challenges and main features, which will help the development of software to better service the needs of construction site managers
The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method.
Different types of data provide different type of information. The present research analyzes the error on prediction obtained under different data type availability for calibration. The contribution of different measurement types to model calibration and prognosis are evaluated. A coupled 2D hydro-mechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are identified by scaled sensitivities. Then, Particle Swarm Optimization is applied to determine the optimal parameter values and finally, the error in prognosis is determined. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain the actual prediction errors. The analyses presented here were performed calibrating the hydro-mechanical model to 31 data sets of 100 observations of varying data types. The prognosis results improve when using diversified information for calibration. However, when using several types of information, the number of observations has to be increased to be able to cover a representative part of the model domain. For an analysis with constant number of observations, a compromise between data type availability and domain coverage proves to be the best solution. Which type of calibration information contributes to the best prognoses could not be determined in advance. The error in model prognosis does not depend on the error in calibration, but on the parameter error, which unfortunately cannot be determined in inverse problems since we do not know its real value. The best prognoses were obtained independent of calibration fit. However, excellent calibration fits led to an increase in prognosis error variation. In the case of excellent fits; parameters' values came near the limits of reasonable physical values more often. To improve the prognoses reliability, the expected value of the parameters should be considered as prior information on the optimization algorithm.
The fire resistance of concrete members is controlled by the temperature distribution of the considered cross section. The thermal analysis can be performed with the advanced temperature dependent physical properties provided by 5EN6 1992-1-2. But the recalculation of laboratory tests on columns from 5TU6 Braunschweig shows, that there are deviations between the calculated and measured temperatures. Therefore it can be assumed, that the mathematical formulation of these thermal properties could be improved. A sensitivity analysis is performed to identify the governing parameters of the temperature calculation and a nonlinear optimization method is used to enhance the formulation of the thermal properties. The proposed simplified properties are partly validated by the recalculation of measured temperatures of concrete columns. These first results show, that the scatter of the differences from the calculated to the measured temperatures can be reduced by the proposed simple model for the thermal analysis of concrete.
The paper analyses the application of 3D gaming technologies in the simulation of processes associated with human resources and machinery on construction sites in order to determine process costs. It addresses the problem of detailing in process simulation. The authors outline special boundary conditions for the simulation of cost-relevant resource processes on virtual construction sites. The approach considers different needs for detailing in process simulation during the planning and building phase. For simulation of process costs on a construction site (contractors view) the level of detail has to be set to high. A prototype for determination of process durations (and hereby process costs) developed at the Bauhaus University Weimar is presented as a result of ongoing researches on detailing in process simulation. It shows the method of process cost determination on a high level of detail (game between excavator and truck) through interaction with the virtual environment of the site.
Der Einsatz von CAD-Applikationen hat die Planungsarbeit im Bauwesen entscheidend verändert. In der Entwurfsplanung sind die Änderungen bereits deutlich erkennbar. Seit der Anwendung von dreidimensionalen Planungswerkzeugen kann der Bauherr das Bauwerk in seiner virtuellen Gesamtheit am Computer betrachten und bewerten. Dies bietet viele Vorteile. So ist der Planer gezwungen alle wesentlichen Details a priori exakt zu planen, wodurch viele Fehler vermieden werden können. Dies bietet insbesondere für Planungen in Baubetrieben, z.B. im Rahmen der Arbeitsvorbereitung, neue Einsatzmöglichkeiten.
Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenwärtig die Realisierung des durchgängigen, fachübergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsfähigkeit der deutschen Bauwirtschaft ist es unumgänglich, vorhandene Effizienzpotentiale in der Bauplanung auszuschöpfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden können. Nach dem gegenwärtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchgängig nutzbar sind. Diese werden in einem allgemeingültigen Format den speziellen Programmen der Fachplaner zur Verfügung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu übertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erfüllen müssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unveränderter Weise erfolgen.
For modeling of singular fields of stresses and deformations in elasters with a crack is offered to use of three-dimesional a special finite element. Weak compessible of elasters is taken into account on the basis of threefold approximation of fields of displacements, deformations and function of volume change. At intensive cyclic loading of the elastomer constructions with a crack it is necessary to take into account warming and large deformations at the crack top. The stress-deformed state elasters with a crack is determined from the decision of a nonlinear problem by a modified method Newton-Kantorovich. Account stress intensity factors for a rectangular plate with a various arrangement of a through crack is executed. Process of development of a surface crack and dissipative warming in prismatic a element of shift is investigated.
Die Gesamtheit der Produktinformationen im Bauwesen stellt sich als sehr inkonsistente und redundante Informationsmenge dar. Die Hersteller stehen vor der Aufgabe, diese Produktinformationen nicht nur in der üblichen Katalogform sondern auch in neuen Medien wie CD-ROM und WWW zu publizieren. Einmal betriebener Erfassungsaufwand muß sich dabei durch eine einfache Mehrfachverwendung der Daten rentieren. Wegen seiner technologischen Eigenschaften eignet sich das WWW sehr gut als primäre Quelle für Produktinformationen. Vor allem wegen der möglichen Aktualität sollte es Grundlage für Publikationen in den anderen Medien sein. Mit verhältnismäßig geringem Aufwand lassen sich die WWW-Präsentation von Produktdaten so strukturieren, daß eine automatisierte Erfassung und Verarbeitung dieser Daten vereinfacht wird. So kann die Datenkonsistenz von der visuellen Präsentation in herkömmlichen Katalogen bis zur automatisch erstellten Produktdatenbank durchgängig gesichert werden. Vor dem Hintergrund der von Schnittstellenproblemen, heterogener Softwarestruktur und unzureichender Ausnutzung der Möglichkeiten der Informatik gekennzeichneten Situation im Bauwesen wird in generalisierter Ansatz mittels SGML vorgestellt. Mit einem derartigen Datenangebot werden neue, verteilte und vernetzte Anwendungen auf Grundlage derselben Produktdaten ermöglicht.
In the rpocess of project construction organization under conditions of limited resources the problem of investor arises, which in onecriteria setting is as follows N invsted projects reindexed i=1,2,...,n are considered, initial parameters of the problem are:- duraion of iproject construction, - expected profit per unit of time from i project after putting it info operation ,-the time fixed , after the expiry of it a fine is paid for each overdued unit of time units in number. The investor resources are limited, i.e., at every moment of time investor can provid delivering of necessary resources only for one project .Any admissible problem decision of investor represents one of n! permutation of of numbers 1,2,..,n. X={x}-is the set of all admissible solutions (SAS) of this problem . In works of different authors the quality of decision is evaluated either by objective function (OF) of the type MINSUM where,by the objective function of the of the type MINMAX
Pseudorigidity method for solving the problem of limit equilibrium of rigid-plastic constructions
(1997)
1.Design calculations , based upon the theory elasticity , cannot completely satisfy engineers and designers , because cannot answer to basic question about overload capability . Only design calculations of limit equilibrium of rigid-plastic constructions can answer to this question completely enough. As a rule , such design calculations are made issue from hypothesis, that material of construction has rigid-plastic diagram Prandtl .This scheme of calculation gives qualitatively more correct results, then usual calculation, based upon law Hooke’s , and allows more really estimate ultimate strength of construction due to different loads. Universal algorithms for solving the problem of limit equilibrium have been created since the middle of the 60’s.These algorithms are based upon two basic theorems about limit analysis - static and kinetics. It was found , that with the help of above-mentioned theorems the problem of limit equilibrium can be formulated as a problem of linear programming (for linear yield) or nonlinear programming (for yield Guber-Mizes). The method of linear programming conformably to calculation of rod systems got the most development in the reports Prager W. [1] and Chiras A. [ 2 ]. The method of linear programming conformably to plates and shells was widely used by Rganizin A.[3]. [3[ contains more full bibliography about this problem. Calculation of limit equilibrium with the help of linear and nonlinear programming has a few significant lacks: - complexity and laboriousness preliminary preparation of problem for PC; - necessity to use special program means , which are not in usual program packet for strength analysis. Author worked out a new method about design calculation of limit equilibrium without above-mentioned lacks . The method is based upon analogy of relations between internal generalized efforts and generalized deformations in elastic system and between generalized efforts and velocities of change generalized deformations in rigid-plastic system. Because later rigid-plastic deformation would be treated as an elastic deformation in the system with special constructed rigidities , this method could be called >pseudorigidity method<.
Problem of discretic programming in conditions of manycriterial is considered. Set of work, being subject to fulfilment, is available. Are certain also: set of the executors; set, machines; set of resources (materials, semifinished items and etc.) and other set. As a functional complex name set, which will be formed, when on one representative of each of the specified sets is nominated to one working place. The allowable decision of a examined problem represents set of not crossed complexes provided that, for each working place one functional complex is certain in the accuracy. The elementary case of a formulated above problem is known under the name >a problem about purposes< [1], when the complex is defined as a pair >an executor - working place<. In case of three-element complexes we come to a problem about three-combinations. In a general case the complex consists from m of elements and the problem of formation of m-element complexes is formulated on the m-colour column.
Model of stressed-strained State of Multilayer Masses with regard for Non-Ideal Contact of Layers
(1997)
Thus, mathematical model stressed- strained of a condition of layered masses is constructed. The model has high accuracy. It allows to simulate slippery contact of layers without friction. Thus not the order of permitting system of the equations is increased, and at its realization the method of fenite elements does not increase quantity of required degrees freedom. The differential operators included in system the equations are similar known in the classical theory of shells. It facilitates construction of a finite element. Presence in system of the differential equations of derivative of external forces allows to use her for the decision of contact problems with a stain of contact commensurable with thickness of a masses.
Analytical models, describing oscillations of systems of interconnected solid and deformable bodies,making a complex movement in fields of inertia forces and gravitation forces, are resulted. Method of numerical investigation of dynamics of the specified systems, based on sharing of parameter prolongation method, Newton-Kantorovich algorithm, Flocke and Liapunov hteories, is developed. On the basis of constructed analytical models and numerical techniques a new, practically important problems of dynamics of systems, consisting of solid bodies, flexible rods, membranes and soft shells, which make a complex movement in fields of forces of inertia and gravity are solved. The received results are used during designing of responsible elements of structures, making a complex movement, which find application in construction and mechanical engineering.
The phenomenological and computational aspects of the various damage models applications for the low and multi cyclic fatigue processes are investigated. Damage is considered as internal state variable, describing macroscopic effects of the progressive material degradation, within the framework of continuum damage mechanics. Present analysis is restricted to the case of isotropic damage, which can be modeled by a scalar variable. The strain, force and power types of kinetic equations for the damage evolution description are considered. The original mixed strain-power type damage model is developed for taking into account the different physical fracture mechanism in monotone and cyclic loading. The constitutive equations of plastic flow theory coupled and uncoupled to damage has been considered. The rational algorithm of implementation into finite element code is considered for developed damage models. Set of the computational experiments has been carried out for the various structures (huge aerials, pipelines, fastening units, vessel of nuclear reactor) and cases of loading. The comparison of the predictions of the developed model with experimental data is performed for 1X18H10T steel tubular specimens for complex paths of loading and for complex profiles beams under cyclic loading. Damage field distribution is the basic information for the prediction of crack initiation in structures. The developed method of structural parameter for stress concentration zones is discussed for correcting of crack location. It allows to describe the crack initiation near surface domain as observe in numerous experiments.
In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts.
The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process
Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed.
In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics.
In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force
The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.
The problem of the computation of stresses and settlements in the half-space under various types of loads is often presented in geotechnical engineering. In 1885 Boussinesq advanced theoretical expressions to determine stresses at a point within an ideal mass. His equation considers a point load on the surface of a semi-infinite, homogeneous, isotropic, weightless, elastic half-space. Newmark in 1942 performed the integration of Boussinesq's equations for the vertical stress under a corner of a rectangular area loaded with a uniform load. The problem of the determination of vertical stresses under a rectangular shaped footing has been satisfactorily solved with renewal integration of the Boussinesq's equation over the arbitrary rectangle on surface of the half-space, with a non-uniform load represented with piecewise linear interpolation functions. The problem of the determination of stresses in the case when the footing shape is an arbitrary quadrilateral however remains unsolved. The paper discusses an approach to the computation of vertical stresses and settlements in an arbitrary point of the half-space, loaded with a uniform load, which shape in the ground plan can be a general four noded form with straight edges. Since the form is transformed into a biunit square and all integrations are performed over this area, all solutions are valid also for an arbitrary triangle by the implementation of the degeneration rule.
The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve.
Parallele Netzgenerierung
(1997)
Bei der Berechnung von statischen oder dynamischen Problemen mit Hilfe der Methode der Finiten Elemente ist eine Diskretisierung des zu berechnenden Gebietes notwendig. Bei einer sinnvollen Modellierung des Gebietes ist die Elementgröße meist nicht konstant, sondern ist an kritischen Stellen kleiner. Die Vorgaben hierfür können einerseits aus Erfahrungen des Anwenders, andererseits aus einer Fehlerabschätzung einer vorangegangenen FE-Berechnung resultieren [5]. Soll die FE-Berechnung auf einem Parallelrechner geschehen, ist eine Partitionierung des Gebietes, d.h. eine Zuordnung der Elemente zu den Prozessoren, notwendig. Bei dem hier beschriebenen Ansatz werden nun im Gegensatz zu den üblichen Verfahren erst die Eingangsdaten für den Netzgenerator umgewandelt und dann das Elementnetz direkt auf dem Parallelrecher gleichzeitig auf allen Prozessoren erzeugt. Eine Aufteilung der Elemente auf die Prozessoren entsteht als Nebenprodukt der Netzaufteilung. Die entstehenden Teilgebietsgrenzen werden geometrisch minimiert. Die Lastbalance der Netzaufteilung sowie der FE-Rechnung wird durch ein annähernd gleiche Anzahl der Elemente je Partition gewährleistet. Als Eingabedaten wird eine Beschreibung des Gebietes durch Polygonzüge, sowie einer Netzdichtefunktion, z.B. durch Punkte mit Angaben über die angestrebte Elementgröße, benötigt.
Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erwähnten Funktionen dargestellt. Darüber hinaus wird die Möglichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle Fälle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen Lösungen geben die Möglichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen ermöglicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die Möglichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen.
Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency
(1997)
Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations.
Multimodel Numerical Analysis of the Elasto-Visco-Plastic Deformation of Materials and Constructions
(1997)
At the present time there is no a generally accepted theory of visco-plasticity which is applicable for a wide class of materials and arbitrary paths of loading. The multimodel approach, based on the creation of hierarchical sequence of the models, is the most rational. The developed library of elasto-visco-plastic models includes both simplest and sophistic models demanding numerous experimental data. A unified general form of constitutive equations for all used elasto-visco-plastic models are presented based upon the concept of tensorial internal state variables. It permits to use unified algorithm of boundary tasks solution for different variants of material models. The developed selection criteria system generates the necessary conditions and provides the choice of the simplest variant of theory sufficient for correct problem solution. Formulation of the selection criteria system is based on peculiarities of viscoplastic materials behavior for the wide range thermomechanical loading and numerous computational experiments with structures different complexity levels. A set of effective schemes of integration stress-strain relations and non-linear finite element system solution are discussed for the considered class of material models. Application possibility of different material models is studied both for material element and for complicated structures. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined loading.
The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown.
Authors' own research in applied unicriterial and multicriterial optimisation of bar structures, and also an analysis of accessible bibliography on structural synthesis allows to present herein an attempt to define a general algorithm for proceeding in formulation of a structural optimisation problem. A practical aspect of such an algorithm consists, in author's opinion, in enabling a designer a correct creation of a mathematical model of synthesis problems, independently of known mathematical methods employed to looking for an unconditional extremum of function of several variables. A proposed algorithm is not a ready-for-use tool for solving all the optimisation problems, but it constitutes an easy-to-expand theoretical basis. This basis should allow a designer to create a proper set of compromises on the way to construct a mathematical model of a specific optimisation problem. The algorithm, presented in the paper, is constructed as a sequence of the one-after-another problem questions, on which the designer answers: yes or no, and a set of selections from the knowledge base consisting of the elements of an optimisation problem components. The order of making questions adopted by the authors in the algorithm is subjective, however it is supported by their experience, both in applied optimisation and in designing of structures like trusses or frames.
Der Funktionsumfang von 3D-Modellierern und die Leistung allgemein zur Verfügung stehender Rechnersysteme gestatten die Modellierung beliebiger Objekte in jeder nur denkbaren Fachdisziplin. Das potentielle Leistungsvermögen von 3D-Modellierern sollte Anreiz sein, sie so alltäglich einzusetzen, wie die etablierten Standardapplikationen. Die im Vortrag gezeigten Modelle umfassen ein kleines Spektrum der möglichen Anwendungsgebiete. Weder vom (Daten)Umfang noch von ihrem Kompliziertheitsgrad stellen sie etwas Besonderes dar. Sie sollen nur das Interesse für einen alltäglichen Einsatz von 3D-Modellierern wecken und eventuell vorhandenen Einsatzschwellen abbauen helfen. Die im Vortrag gezeigten Bildfolgen sind unter http://www.uni-weimar.de/animationen zu finden.
Der englische Physiker und Mathematiker Roger Penrose hat eine mathematische Pflasterung entdeckt, deren Formenreichtum neue Impulse in der Architektur setzen kann. In der Gemeinde Bütgenbach im Hohen Venn, Belgien, wurde das Verwaltungszentrum durch den Essener Architekten Ernst Burghartz mit mehrereren Penrose-Pflasterungen versehen. Diese beruhen auf einem Computer-Programm, welches der Vortragende zusammen mit Dr. Frank Martini entwickelt hat. Herr Burghartz hat jedoch diesen Vorentwurf nach seinen künstlerischen Vorstellungen abgewandelt.
Seit mehreren Jahren wird im Fachbereich Gestaltung, Studiengang Innenarchitektur 3D-Computergrafik und -animation in Lehrveranstaltungen ausgebildet und in Projekt- und Diplomarbeiten als Darstellungsmedium angewandt. Eine besondere Herausforderung stellen dabei die 3D-Visualisierungen von historischen Gebäuden dar. Mit den beiden nachfolgenden Beispielen soll der Einsatz und die curricularen Verknüpfung der CA-Technologie mit Studienarbeiten und Projekten zum Thema >Denkmalpflege< aufgezeigt werden. Rekonstruktion und Visualisierung des ehemaligen >Jagdschlosses Platte< bei Wiesbaden. Mit Unterstützung einer Kunsthistorikerin wurde in einer Studienarbeit das im Krieg zerstörte ehemalige Jagdschloß im Computer nachgebildet. Neben der Darstellung des Gebäudeäußeren und des zentralen Innenbereiches wurde eine Animation über die Triangulierung der klassizistischen Geometrie erstellt. Umnutzung historischer Bausubstanz am Beispiel der ehemaligen Klostersanlage >Schiffenberg< bei Gießen. Im Rahmen einer Projektarbeit wurden mehrer Konzepte entwickelt, Entwürfe erstellt und mittels Computeranimationen öffentlich präsentiert. In Kooperation mit dem Studiengang Fernsehtechnik (FH-Wiesbaden) wurde von zwei Studenten eine Videodokumentation über den gesamten Projektverlauf erstellt. Neben dem Aufzeigen der Arbeitsprozesse und dem Vorstellen des Lehrkonzeptes für die curriculare Einbindung der CA-Technologie werden aktuelle Studienergebnisse anhand von Videoprojektionen vorgestellt.
Methods with the convergence order p 2 (Newton`s, tangent hyperbolas, tangent parabolas etc.) and their approximate variants are studied. Conditions are presented under which the approximate variants preserve their convergence rate intrinsic to these methods and some computational aspects (possibilities to organize parallel computation, globalization of a method, the solution of the linear equations versus the matrix inversion at every iteration etc.) are discussed. Polyalgorithmic computational schemes (hybrid methods) combining the best features of various methods are developed and possibilities of their application to numerical solution of two-point boundary-value problem in ordinary differential equations and decomposition-coordination problem in convex programming are analyzed.
In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.
Bei der Betrachtung von Stapelproblemen ergibt sich unter anderem folgendes Problem: Ein gegebener Stapel - bestehend aus den Elementen v i der Menge V - soll an anderer Stelle in einer vorgeschriebenen, veränderten Struktur wieder aufgebaut werden. Dazu stehen Hilfsstapelplätze zur Verfügung. Die Optimierung dieses Problems hinsichtlich der Anzahl der benötigten Hilfsstapelplätze ist NP-vollständig. Es werden Erfahrungen mit einem Branch-and-Bound Algorithmus zur Lösung des Problems vorgestellt sowie ein heuristischer Algorithmus diskutiert
Gegenstand der Betrachtung ist ein spezielles Tourenproblem der Schüttgutoptimierung. Man stelle sich als Realitätsbezug ein Transportunternehmen vor, das eine Anzahl von gleichartigen Fahrzeugen in einem Fuhrpark stationiert hat. Vorgegebene Mengen von Schüttgut müssen von einer Kiesgrube zu mehreren Baustellen transportiert werden. Dabei sind Be- und Entladezeiten, unterschiedliche mittlere Geschwindigkeiten für Leer- bzw. Lastfahrten und Schichtzeiten zu berücksichtigen. Gesucht ist eine optimale Anzahl von einzusetzenden Fahrzeugen und die zugehörigen Tourenpläne mit dem Ziel der Minimierung der Transportkosten unter Beachtung der Lieferverträge. Die Lösung des Problems erfolgt in zwei Phasen. Zuerst wird die Frage geklärt, wieviele Fahrzeuge bei minimalem Kostenniveau einzusetzen und welche zu den Leerfahrten gehörigen Teilstrecken wie oft zu befahren sind. Anschließend wird mit heuristischen Verfahren versucht, die Menge der zu fahrenden Teilstrecken so auf die Fahrzeuge aufzuteilen, daß für jedes Fahrzeug eine zulässige Tour entsteht. Zur komplexen Lösung einer denkbaren Aufgabe liegt ein Programm in der Programmiersprache PASCAL vor. Die erzielten numerischen Resultate belegen, daß auch für Probleme größerer Dimension eine Optimallösung oder sehr gute Näherungen in vernünftiger Zeit gefunden werden.
Priority-rule methods for approximately minimizing the duration of a project subject to minimal and maximal time lags between the activities of the project and limited availability of renewable resources are considered. Such a project can be modelled by a cyclic activity-on-node network. Two generation schemes for constructing feasible schedules are discussed: the serial and parallel schemes. Two different kinds of heuristic procedures are proposed. The sequential or direct method processes the activities or respectively nodes of the project network one after another without considering the strong components separately. The contraction method uses a bottom-up technique. First, a feasible subschedule is determined for each strong component. Second, each strong component is replaced by a single node and the resulting acyclic network is treated by the direct method. In conclusion, some results from an experimental performance analysis of the heuristics are given using a new network generator.
We consider the standardization problem (SP) which can be formulated as follows. It is known demand bi in each type i in {1, 2, ..., n} of items. Production of yi items of the ith type brings a profit fi (yi), where fi is a nondecreasing concave function for each i in {1, 2, ..., n}.It is necessary to satisfy the demand and to maximize the total profit provided that there exist >standardization possibilities< . These possibilities means that some types of items can be replaced by some another types. We introduce generalized standardization problem (GSP) in which titems demand is given as the set of admissible demand vectors. We show that GSP and SP are special cases of the resource allocation problem over a network polymatroid. Ibasing on this observation we propose a polynomial time solution algorithm for GSP and SP.
The idea of representing urban structure and various communication systems (water and energy supply, telephone and cable TV networks) as fractal objects is not absolutely new. However, known works, devoted to this problem use models and approaches from fractal physics. For example, to simulate urban growth Diffusion Limited Aggregation (DLA) model and Dielectric Breakdown (DB) model are used. This study introduces a different approach. Net structure of communication system is described by a graph of special type called regular G(l,r,n)-graph. Authors provide description of such graph, develop iterative process for its generation and prove its self-similarity, i.e. that every regular graph is a pre-fractal. After the infinite number of steps this process generates a fractal. The devised algorithm for generation and grathical representation of regular G(l,r,n)-graphs with different values of l,r and n has been programmed to receive computer simulations. For optimal graphic presentation of pre-fractals the Optimal Space Ordering method was suggested. It is based on the minimization of the >graph energy< value about vertices' coordinates. The effective procedure for optimization was developed that takes into account specific properties of graph energy as objective function For the fractal graph introduced the Hausdorff-Besikovich and similarity dimensions were calculated. It has been shown that >graph energy< is directly related to the graph's fractal properties. For G(3,3,n) and G(4,4,n) graphs fractal dimensions calculated by different methods are the same (D=1,5 and D=2 respectively), while topological dimension of both graphs is 1.
A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model
This work was partially supported by DAAD, Fundamental Researches Foundation of Belarus and International Soros Science Education Program We consider a vector discrete optimization problem on a system of non- empty subsets (trajectories) of a finite set. The vector criterion of the pro- blem consists partial criterias of the kinds MINSUM, MINMAX and MIN- MIN. The stability of eficient (Pareto optimal, Slater optimal and Smale op- timal) trajectories to perturbations of vector criterion parameters has been investigated. Suficient and necessary conditions of eficient trajectories local stability have been obtained. Lower evaluations of eficient trajectories sta- bility radii, and formulas in several cases, have been found for the case when l(inf) -norm is defined in the space of vector criterion parameters.
The theory of random matrices, or random matrix theory, RMT in what follows, has been developed at the beginning of the fties to describe the sta- tistical properties of energy levels of complex quantum systems, [1], [2], [3]. In the early eighties it has enjoyed renewed interest since it has been recognized as a very useful tool in the study of numerous physical systems. Specically, it is very useful in the analysis of chaotic quantum systems. In fact, in the last years many papers appeared about the problem of quantum chaos which implies the quantization of systems whose underlying classical dynamics is irregular (i.e. chaotic). The simplest models considered in this eld are billi- ards of various shapes. From the the classical point of view, a point particle in a 2-dimensional billiard displays regular or irregular motion depending on the shape of the billiard; for instance motion in a rectangular or circular billi- ard is regular thanks to the symmetries of the boundary. On the other hand, billiards of arbitrary shapes imply chaotic motion, i.e. exponential diver- gence of initially nearby trajectories. In order to study quantum billiards we have to consider the Schroedinger equation in various 2-dimensional domains. The eigenvalues of the Schroedinger equation represent the allowed energy levels of our quantum particle in the billiard under consideration, while the eigenfunction norms represent the probability density of nding the particle in a certain position. The question of quantum chaos is whether the charac- ter of the classical motion (regular or chaotic) can in uence some properties
With the help of functional analytical methods complex analysis is a powerful tool in treating non-linear first-order partial differential equations in the plane. Some of the most important of these equations are the Beltrami equations. This is due to the fact that the theory of Beltrami systems is related to many problems of geometry and analysis, like non-linear subsonic two-dimensional hydrodynamics, problems of conformal and quasiconformal mappings of two-dimensional Riemannian manifolds, or complex analytic dynamics. The theory of Beltrami equations is strongly connected with the -operator. This singular integral operator is immediately recognized as two-dimensional Hilbert-transform, known also under the name of integral operator with Beurling kernel, acting as an isometry of L2(C) onto L2(C). In hypercomplex function theory the Beltrami equations have not yet this importance, but nevertheless, they are a basic condition for the transfer of complex methods and efforts for solving partial differential equations, especially of non-linear type, to the spatial case. Here we deal with hypercomplex Beltrami systems. For this we restrict ourselves to the quaternionic case, but without any loss of generality. We will show how a spatial generalization of the complex -operator can be used to solve systems of non-linear partial differential equations, in particular different types of spatial Beltrami systems. Also, the for practical purposes so important norm estimates will be derived. Some of our results are stronger as known results in the complex case, but they are applicable in the complex situation, too.
The aim of this talk is to show that the methods used by Métivier and Lapidus to study the eigenvalue distribution of elliptic operators (e.g., of the Dirichlet Laplacian) can be adapted to the study of the similar problem for the Stokes operator. In this way we get asymptotic formulae for the eigenvalues of the latter operator even in the case when the underlying domain has an extremely irregular (fractal) boundary. In the case the boundary is not that irregular (e.g., when it is Lipschitz) the estimates we obtain are much better than the ones we can find in the current literature.
Bauwerke sind in ihrer Betriebszeit vielen nutzungseinschränkenden Einflüssen ausgesetzt. Die dadurch erforderliche Instandhaltung dient zur Gewährleistung und zur Erhöhung der geplanten Nutzungsfähigkeit sowie Dauerhaftigkeit von Bauwerken. Sie spielt eine immer größere Rolle im Bauwesen. Die Kosten der Bauwerksinstandhaltung betragen je nach Art des Bauwerkes in Deutschland pro Jahr ca. 1-6% des Wiederbeschaffungswertes. Die Reduzierung des Instandhaltungsaufwandes durch Technik- und Management-Maßnahmen ist daher wirtschaftlich sinnvoll. Der Einsatz moderner Informations- und Kommunikationstechnologie auf dem Gebiet der Bestandsaufnahme und -analyse ist erforderlich, um einerseits die Bearbeitung von multimedialen Informationen über Ist- und Soll-Zustände von Bauwerken effektiver durchzuführen und um andererseits die Analyse von Schäden im Sinne einer Entscheidungshilfe zu unterstützen. Durch den Einsatz der WWW-Technologie kann die Bearbeitung auch verteilt im Datennetz über ferne Rechner hinweg erfolgen. Im Beitrag werden die Konzeptionierung und Implementierung des WWW-fähigen DV-Systems BINAS zur Unterstützung der Bestandsaufnahme und -analyse sowie die dafür erforderlichen Methoden und Werkzeuge vorgestellt.
Die Entwicklung Berlins zur neuen Hauptstadt des vereinigten Deutschlands erfordert den umfangreichen Ausbau der innerstädtischen Verkehrswege und eine umfassende Einbindung in das bundesweite Verkehrsnetz. Der Ausbau der Inter-City-Express-Strecke zwischen Hannover und Berlin bedingte eine Umplanung großer Streckenabschnitte der Deutschen Bahn AG. Im Zeitalter der computergestützten Informationsverarbeitung sind gerade auf dem Gebiet der Tragwerksplanung konstruktiver Ingenieurbauten vielfältige Möglichkeiten gegeben. So ist bei der Planung von Brückenneubauten eine durchgehende computergestützte Konstruktion und Tragwerksplanung vom Vorentwurf bis hin zur Fertigung möglich. Weiterhin gestatten besondere Berechnungsmethoden bei speziellen Belastungsarten eine exaktere Schnittkraft- und Spannungsermittlung und dadurch eine dem wirklichen Tragverhalten entsprechende genauere Nachweisführung. An Beispielen aus dem konstruktiven Ingenieurbau im Zuge der Sanierung der Berliner Stadtbahn wird die Anwendung moderner Rechentechnik und computergestützter Konstruktionsmethoden und Berechnungsverfahren diskutiert. Die Berliner Stadtbahn wird in weiten Abschnitten über gemauerte Ziegelsteinviadukte geführt. Das Konzept der Sanierungsmaßnahmen sah neben der Anordnung einer lastverteilenden Platte einen Gleisaufbau als Feste Fahrbahn vor. Zusätzlich wurden die Gleisabstände den heutigen Bundesbahnvorschriften angepaßt. Aus diesem Grund wurde eine genaue Nachrechnung der Stadbahnviadukte unter Berücksichtigung der verschiedensten Parameter (z.B. Fugen in der lastverteilenden Platte, Rißbildung im Mauerwerk, Schubverformungen in Fugen zwischen Beton und Mauerwerk bei Überschreitung von Grenzwerten) erforderlich. Die zwischen dem Berliner Hauptbahnhof und dem Bahnhof Jannowitzbrücke befindliche Eisenbahnüberführung über die Holzmarktstraße wurden abgebrochen. Das neue Bauwerk besteht aus einer zweifeldrigen, schiefwinkligen Deckbrücke für 4 Gleise. Auf Grund der komplizierten geometrischen Randbedingungen erfolgte eine durchgängige computergestützte Erstellung der Ausführungsunterlagen. Die Hauptabmessungen der Konstruktion wurden mit Hilfe von Vermessungsdaten bestimmt, die im CAD-Programm verarbeitet wurden. Die CAD-Daten bildeten die geometrischen Eingangsgrößen für das Berechnungsprogramm. Die Querschnittsdimensionierung der Berechnung ging dann in die CAD-Bearbeitung ein. Die Koordinaten für die Werkstattfertigung sowie für die Montage auf der Baustelle ergaben sich ebenfalls aus den Berechnungsergebnissen.
Der Entwurf einfacher Konstruktionen stellt für den Tragwerksplaner zumeist eine Routineaufgabe dar. Üblicherweise werden Statik, Zeichnungen sowie Elementelisten separat voneinander erstellt. Das Programmsystem ICAD bietet die Möglichkeit, diese Arbeiten in einer Bearbeitungsstufe durchzuführen. Die Programmierung der Bemessung, Darstellung und Auswertung von Bauteilen wird mit dem Editor Emacs vorgenommen, die grafische Umsetzung des compilierten Quelltextes erfolgt im ICAD-Browser. Innerhalb dieser Benutzeroberfläche steht eine Reihe von Werkzeugen für die Eingabe und Visualisierung von Daten zur Verfügung. Betrachtet man die zu bearbeitenden Bauteile und Anschlüsse als bekannte Konstruktionen des Ingenieurholzbaus, für die es eine festgelegte Anzahl von Abmessungen und Kennwerten gibt, so läßt sich jede dieser Konstruktionen als eigenständiger Modul programmieren. Der Tragwerksplaner ist somit in der Lage, aus einem Katalog an Bauteilen und Anschlüssen die Gesamtkonstruktion zusammenzustellen. Allgemeingültige Kennwerte, Berechnungsverfahren und häufig verwendete Unterprogramme stehen modular als Wissensbasis zur Verfügung und werden von den einzelnen Tragelementen bedarfsgerecht eingebunden. Eine weitere Möglichkeit der wissensbasierten Tragwerksplanung stellt die sogenannte Multi-Criteria-Analyse dar. Bei diesem Verfahren nimmt das Programm selbständig eine Entscheidungsfindung für eine oder mehrere günstige Konstruktionslösungen vor. Dazu sind lediglich Wichtungen verschiedener Randbedingungen durch den Anwender erforderlich.
Der Beitrag beschreibt die Entwicklung eines Softwaresystems zur strukturierten Erfassung und Verwaltung bestehender Gebäude in der Architektur. Die Erfassung erfolgt durch die Aufnahme von geometrischen Daten und Sachdaten in unterschiedlichen Abstraktionsstufen unter Einbeziehung einer vorangehenden Dekomposition. Basis für die Entwicklung eines solchen Systems ist die Analyse und Systematik der Erfassungstechniken, -abläufe und der Gegenstand der architektonischen Bestandsaufnahme. Parallel hierzu erfolgt die Bewertung und Nutzung aktueller Techniken und Werkzeuge der applikativen Informatik. Schwerpunkte der Forschungsarbeit sind die Ableitung einer allgemeinen Gebäude- und Bauteilstruktur, die Einbeziehung aktueller informationstechnischer Verfahren und Werkzeuge und die Entwicklung eines entsprechenden Experimentalsystems. Auf eine Auswahl softwaretechnischer Entwicklungen wird näher eingegangen (objektspezifische Eigenschaften, flexible Geometrieerfassung und Benutzeroberflächen).
SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics
(1997)
Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account.
Bauwerke werden heute mit umfassender Systematik Bauwerke werden heute mit umfassender Systematik die Brauchbarkeit der Bauwerke werden durch Normung und Prüfung intensiv beeinflußt. Der Computereinsatz ist in diesem Bereich allgemein üblich. Im Gegensatz zu Planungs- und Ausführungsphase eines Bauwerks ist die Betriebsphase wenig systematisiert. Dies ist überraschend, da die Betriebsphase über die Lebensdauer eines Bauwerks hinweg wesentlich größere Kosten verursacht, als der Rohbau und da der Nutzen des Bauwerks ja nicht in seiner Errichtung sondern in seinem Betrieb liegt. Die mangelnde Systematik der Bewirtschaftung ist beispielsweise daran ersichtlich, daß es im allgemeinen noch keine brauchbare Dokumentation der Gebäudebewirtschaftung, wenige Normen und wenig Software für diesen Aufgabenbereich gibt.
Unterschiedliche Sichten auf einen Anwendungsbereich drücken sich in unterschiedlich strukturierten Modellen aus. Diese Modelle enthalten im allgemeinen unterschiedliche Arten von Informationen über Objekte ihres Anwendungsbereiches. In diesem Beitrag soll ein Konzept zur Modellintegration beschrieben werden, das die Zusammenführung dieser Informationen gestattet. Im Gegensatz zu traditionellen Methoden des Datenaustauschs, bei dem Objekte des einen Modells in Objekte des anderen Modells konvertiert werden, beruht das Integrationskonzept auf dem Erkennen und dem Verbinden einander äquivalenter Objekte in den Modellen. Als Grundlage zur Beschreibung der Modellschemata wurde die in der ISO 10303-11 spezifizierte konzeptuelle Sprache EXPRESS benutzt. Der Objektzugriff wird durch ein Laufzeitsystem realisiert, das auf der Basis des Standard Data Acces Interface (SDAI ISO 10303-22) entwickelt wurde. Die Modellintegration umfaßt zwei Teilbereiche. Zum einen muß ein Abgleich der verschiedenen Schemata (Schema mapping) erfolgen. Zum anderen müssen Regeln zur Objektidentifikation (Object matching) beschrieben werden. Zur Angabe dieser Integrationsinformationen wurden Strukturen entwickelt. Die in diesen Strukturen abgelegten Beziehungen werden durch das Laufzeitsystem ausgewertet. Durch diese Vorgehensweise lassen sich zum einen alle verfügbaren Informationen über Objekte des Anwendungsbereiches zusammenführen, so daß sie im Gesamtkontext sichtbar werden und bearbeitet werden können. Zum anderen können Inkonsistenzen zwischen den Modellen erkannt und ausgewertet werden.
Increasing complexity of today's buildings requires a high level of integration in the planning process. Common planning strategies, where individual project partners cooperate mainly to exchange results, are not suitable to jointly develop project goals and objectives. Integrated planning, a more holistic approach to deal with complex problems, is based on a high degree of communication amoung team members and leads to a goal oriented cooperation. Current approaches in the reasearch area of Computer Supported Cooperative Work (CSCW) poorly meet the requirements in planning. A planning process model, based on the principles of integrated planning will be introduced, aimed to provide the background for the implementation of a CSCW-platform.
We provide a critical overview of the current status of computational support for construction the management and building performance evaluation in North-America. This overview is based on the research conducted in relation to the design and construction of the Intelligent Workplace (IW), Carnegie Mellon University, Pittsburgh, Pennsylvania, USA. With regard to the commercial software products in the field of construction management the following limitations can be identified: Although project planning, cost estimating and construction simulation are supported, tasks like bidding as well as site and material management have not received the same level of attention. Few project management software packages are integrated in a total design support software system. Little analysis or evaluation options are provided to support managerial decision making. Various research groups address the construction planning and scheduling, construction contracting, site layout generation as well as the integration of these three topics. Currently problems such as efficient material management and calculation of environmental and energy responsive site management are insufficiently addressed within the ongoing research projects. In the domain of building performance simulation and decision support one can notice that, the development and application of computational tools is industry driven. As a result the concerns addressed by the tools are mainly issues pertaining to the selection and sizing of systems and components rather than an integrated performance evaluation. Consequently, these programs are rarely used by building designers, especially in the early design stages, where the predictive capabilities of simulation tools could be of significant value. Although many research institutions address the necessity for the integration of performance simulation within the overall design support environments most of the practically available performance simulation tools still remain mono-dimensional and isolated.
Informationstechnische Integration im Bauwesen durch Nutzung fachspezifischen Anwenderwissens
(1997)
Im vorliegenden Beitrag wird ein Integrationskonzept vorgestellt, bei dem das fachspezifische Wissen des Anwenders integraler Bestandteil des Konzeptes ist. Grundgedanke des Konzeptes ist es, die Informationen vorerst im Kontext der Anwendung, mit der sie erstellt wurden, zu belassen. Die Interpretation der Informationen erfolgt durch den Anwender, der diese Informationen zur Integration nutzen möchte. Er weiß, welche Daten er für seine Arbeiten benötigt, und er verfügt über das erforderliche fachspezifische Wissen, um die Informationen anderer Bearbeiter verstehen zu können. Damit ist es nicht erforderlich, die internen Datenstrukturen einer Software zu verstehen und in einem neutralen Format zu beschreiben. Die Integration erfolgt interaktiv am Bildschirm durch den Anwender. Das vorgestellt Konzept wird in den Kontext der in der Literatur beschriebenen Integrationskonzepte eingegliedert. Hierzu werden die Integrationskonzepte klassifiziert. Die Klassifikation erfolgt auf der Grundlage der Software-Architekturen. Das vorgestellte Integrationskonzept wird am Beispiel der Angebotsbearbeitung im Bauwesen konkretisiert.
For many purposes geometric information about existing buildings is necessary, e.g. planing of conservation or reconstruction. Architectural photogrammetry is a technique to acquire 3D geometric data of buildings for a CAD model from images. In this paper the state of the art in architectural photogrammetry and some developments towards automation are described. The photogrammetric process consists of image acquisition, orientation and restitution. Special attention is put on digital methods, from digital image acquisition to restitution methods, supported by digital image processing. There are a few field of development towards automation, e.g. feature extraction, extraction of edges and lines and the detection of corresponding points. The acquired data may be used in a CAD environment or for visualization in Virtual Reality Models, using digital orthoimages for texture mapping.
Due to technological progress and European standardization (e.g. ISO certification) there is an increasing demand to automate the digital recording of building plans. Currently there are two approaches available: (1) labour-intensive redrawing with digitizing tablets or by screen digitizing, (2) automatic scanning and vectorizing where vectorization generally demands an interactive follow-up treatment due to incomplete or ambigues results. This paper proposes a knowledge-based approach for building plan analysis. The procedure reveals the following processing steps: scanning of the building plan, enhancing the image quality and binarization, extraction of lines, line junctions and character fields, knowledge-based interpretation and grouping of image features to domain specific feature aggregates like door symbols, stair symbols etc., optical character recognition and lexicon-based interpretation of character fields, matching of feature aggregates with dimension sets. First results of a prototype implementation are presented. At last an extension of the approach towards a semantic modeling concept showing a coupling between 3D object modeling and an explict 2D modeling of images and technical drawings is presented
There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets
Eine Bauunterlage ist in der Regel an mehreren Orten vorhanden. Sie wird von verschiedenen Personen an verschiedenen Orten zu verschiedenen Zeitpunkten geändert. Die Änderungen sind häufig und in vielen Fällen von geringem Umfang. Die Verteilung solcher Unterlagen in Computernetzen, sowie die Durchführung und die Verwaltung von Änderungen stellen hohe Anforderungen an die Informations- und Kommunikationstechnik. Insbesondere ist die Konsistenz der Unterlagen unter Berücksichtigung der typischen Merkmale des Arbeitsablaufes im Bauwesen zu sichern. Im Vortrag wird ein Konzept für die Bearbeitung von Bauunterlagen, insbesondere für Zeichnungen, in Computernetzen vorgestellt. Grundlage dieses Konzeptes ist die Norm ISO 10303 STEP (The standard for exchange of product model data). Das AP 201 >Explicit draughting< der ISO 10303 wurde als Austauschformat für Zeichnungen festgelegt. Im Rahmen des Vortrages wird ein Projektmodell vorgestellt. Das Projektmodell bildet den Informationsfluß während des Bauprozesses ab und ermöglicht die Sicherung der Konsistenz einer Zeichnung während der Bearbeitung der verschiedenen Fachleute. Bei Änderung einer Zeichnung wird ausschließlich die Differenzmenge als Information übertragen. Da die Arbeitsweise des Ingenieurs im Bauwesen eine Vollauthomatisierung des Datenaustausches nicht zuläßt, werden Änderungen nur nach Entscheidung des zuständigen Fachmanns in die ursprüngliche Fassung der Zeichnung übernommen. Werkzeuge für die Unterstützung der Auflösung von Widersprüchen in einem Dokument werden vorgestellt.
Es wird gezeigt, daß im allgemeinen die Zeichnungsinhalte von Entwurfsplänen im konstruktiven Ingenieurbau in Teilzeichnungen zerlegt werden können, denen fachspezifische Objekte des Bauwesen entsprechen. Solche Objekte sind beispiels- weise Querschnitte, Träger, Stützen und Fundamente. Diese Teilobjekte werden durch eine unterschiedliche Anzahl von Parametern festgelegt werden. Wählt man für diese Parameter die entsprechendnen Fachbegriffe, so hat man durch diese die Möglichkeit die Teilobjekte auch in Datenbanken zu speichern. Neben den Sachparametern müssen auch zeichnungs- technische Werte, wie Maßstab, gewählte Längeneinheiten (m,cm..) und Einsatzpunkt - für die Lage des Teilobjektes im Gesamtplan - gespeichert werden. Zeichenmodule für jedes Teilobjekt können dann bei Aufruf eines bestimmten Planes aus den Daten der Datenbank die Teilzeichnungen generieren, sodaß eine Planspeicherung in der übliche Speicherform (Speicherelemente Punkt, Linie usw.) nicht mehr erforderlich ist. Neben der reinen Darstellung können die Programmodule auch dahingehend erweitert werden, daß auch die zugehörigen Berechnungen durchgeführt werden. Die numerischen Ergebnisse wie auch die Eingabewerte werden in einem alfanumerischen Dokument abgelegt. Damit ergibt sich dann ein Konstruktionsystem für den Entwurf, das insbesondere die Berechnung von Varianten sehr erleichertert. In Sonderfällen können auch die Pläne in ein Standard CAD Programm eingelesen werden, um allfällige Besonderheiten interaktiv zu ergänzen. Das relationale Modell wird weiters vorgestellt, nach dem die Zeichnungsinhalte gespeichert werden. Neben reinen Teilobjektsätzen werden auch Tabellensätze verwendet, um unter einem Namen mehrere numersiche Daten verwalten zu können. Es werden auch sogenannte Fort- setzungssätze besprochen, die in Entsprechung der stark unterschiedlichen Anzahl der Objektattibute verwendet werden.
Neben der reinen Bauausführung und den damit verbundenen Roh- und Ausbaukosten stellt insbesondere die Bewirtschaftung von Gebäuden einen wesentlichen Kostenfaktor dar, den zu minimieren Ziel der Bestrebungen auf dem Gebiet des Facilities Management ist. Insbesondere die Integration der verteilt vorliegenden Informationen muß hierbei das Ziel sein, um durch effiziente Informationsverarbeitung eine Einsparung von Unterhaltskosten zu erreichen. Bereits in der Planungsphase lassen sich die späteren Kosten für die Bewirtschaftung modellieren. Dies gilt auch für die Modellierung des Energiehaushaltes von Gebäuden. Für die Modellierung des Wärmeschutzes und der damit verbundenen Ermittlung des Heizenergiebedarfs werden z.Zt. starke Vereinfachungen getroffen, die durch die aktuelle Wärmeschutzverordnung vorgegeben sind, so daß die errechneten Werte meist sehr ungenau sind. Für eine DV-gerechte Modellierung eines Gebäudes während seiner Bewirtschaftung reichen herkömmliche CAD-Systeme nicht aus, da das Modell verschiedene Sichten zulassen muß: Neben einer bauteilorientierten Sicht muß auch eine raumorientierte Sicht vorgehalten werden, damit eine Modellierung von flächenbezogenen Parametern wie z.B. Kosten möglich wird. Dieser Beitrag zeigt einen Ansatz, der eine intensive Nutzung heterogener Ressourcen und Informationen auf der Grundlage eines dreidimensionalen Gebäudemodells ermöglicht. Exemplarisch für die Bereiche Raummanagement (im Sinne von kosten- und nutzungsorientierter Bestandsverwaltung) und Bauphysik wird dieser Ansatz erläutert und die Eingliederung dieser Teilgebiete der Bestandsverwaltung und -bewirtschaftung in ein Gesamtsystem aufgezeigt.
Die Kosten für die Unterhaltung von Bauwerken über den Lebenszyklus sind im Vergleich zu den Planungs- und Herstellungskosten erheblich größer. Insbesondere setzt eine Reduzierung des Instandhaltungsaufwandes als Teilprozeß der Bestandsverwaltung das rechtzeitige Erkennen von Bauschäden und das vorausschauende Ergreifen von Gegenmaßnahmen voraus. Das planmäßige Vorgehen beim Erkennen von Bauschäden, d.h. die regelmäßige Überwachung baulicher Anlagen, dient nicht nur dem sparsamen Umgang mit vorhandenen Mitteln, sondern verringert auch die Gefahr des plötzlichen Versagens von tragenden Bauteilen. Dadurch werden Gefahren für die Nutzer der Bauwerke frühzeitig abgewendet. Die Notwendigkeit der systematischen Instandhaltung mit modernen Methoden wird auch in den Schlußfolgerungen des dritten Bauschadensberichts des Bundesministeriums für Raumordnung, Bauwesen und Städtebau unterstrichen. Um den Zustand eines Bauteils festzustellen, werden ausreichende Informationen über Struktur, Material, Alter, Belastungen, Umweltbedingungen etc. benötigt. Zur Verarbeitung dieser Fülle von Informationen unterschiedlichen Typs (z.B. technische Dokumente, CAD-Zeichnungen, Photos etc.) bei der Überwachung und Dokumentation baulicher Anlagen ist eine geeignete DV-Unterstützung notwendig. Zur Verwaltung der komplexen Baustrukturinformationen werden objektorientierte Bauwerksmodelle benötigt. Zur bedarfsgerechten Aufbereitung der unterschiedlichen Informationsarten und -qualitäten ist zusätzlich eine multimediale Informationsverarbeitung sowohl intern als auch in der Benutzungsschnittstelle erforderlich. Im Beitrag werden die Grundlagen objektorientierter Methoden zur Bauwerksmodellierung sowie von Multimedia mit den Bereichen Text, Graphik (Vektor- und Pixelgraphik), Audio, Photo und Video einschließlich deren Verknüpfungsmöglichkeiten im Sinne von Hypermedia an Beispielen erläutert. Zusätzlich werden aktuelle Entwicklungstendenzen im Bereich der Telekommunikation mit den Möglichkeiten des Computernetzes INTERNET zur Bestandsverwaltung in verteilten Systemen aufgezeigt. Abschließend werden Anwendungen der objektorientierten und multimedialen Informationsverarbeitung in der täglichen Ingenieurpraxis am Beispiel des DV-Systems BestandManager zur Überwachung und Dokumentation baulicher Anlagen vorgestellt.
Essence of service unreliability on account of irregularity has been given. The reasons of occurance of overcrowded vehicles have been listed. The factor of service unreliability on account of irregularity has been determined. It is probability of the event, that the passenger finds departing vehicle fully filled, i.e. when all places seating and standing are occupied or condition of the travel, which would be not acceptable for passenger. Large dispersion of headways (i.e. irregularity) increases probability of such situations. To calculate the mentioned factor, the computer simulation was used. Both, passenger arrivals and vehicle operation have been modelled as stochastic interacted processes. Distributions of headways and passenger arrivals have been fixed by statistical methods. The >maximal capacity< of a vehicle has been determined. The set of parameters values for simulation runs has been given. The transformed results of computer simulation are series of nomographs for determination of a factor value. They were prepared for many types of trams and city buses, but only one nomograph has been presented. Difficulties in verification of model were discussed. Recommendations for rational utilisation level of public transport means capacity in the condition of randomness of passenger arrivals and disturbances in vehicle operation have been proposed. The other possibilities of service unreliability have been mentioned. General conclusions have been given
Die Zielstellung der ModalSplitBetrachtungen läuft darauf hinaus, Entscheidungs-kriterien zu erarbeiten, nach denen die einzelnen Personen ihre Verkehrsmittel auswählen. In dieser Veröffentlichung wurden alle drei Gruppen der Modelle (klassische, verhaltensorientierte und der Analyse) der Verkehrsaufteilung kurz charakterisiert. Dann wurden vier ausgewählte Modelle genauer beschrieben. Zum Schluß wird das Modell der Verkehrsmittelwahl dargestellt , das für die Untersuchung der Verkehrsaufteilung in Krakau verwendet wurde .
Das Eintreffen der Passagiere einer Haltestelle eines öffentlichen Nahverkehrsmittel wird als stochastischer Prozeß beschrieben . Die Ankünfte der Nahverkehrsmittel stellen einen Erneuerungsprozeß dar , wohingegen die Ankünfte der Personen innerhalb einer Erneuerungsperiode als instationärer Poissonprozeß aufgefaßt wird. Über die Intensitätsfunktion liegen Messungen vor. Betrachtet wird die Gesamt- wartezeit der Personen an einer Haltestelle .
O-D Matrix sind die wichtigste Informationsquelle, die den Bedarf an Transport in der Stadt betrifft. Sie dienen den richtigen Bildung von Straßennetz und Öffentlichen Personen Verkehrslinien. Anhand diesen Grundlagen gerechnet man Verkehrsstärken, die zur Dimensionierung der Verkehrsinfrastruktur benutzt werden. Im Verkehrsplannung zur Rechnung O-D Matrix wird Vier - Stufen - Methode angewendet. In dieser Methode verwendet man die Angaben aus den Haushaltsumfragen und aus den Kordonumfragen. Diese Methode fordert einen großen Arbeitsaufwand und Kosten. Hier wird die andere Methode dargestellt. Bei Schätzung der O-D Matrix verwendet man die Verkehrsstärken, die in den Straßenquerschnitten gemessen werden. Wir brauchen gemessene Verkehrsstärken auch für andere Ziele (z. B. für Signalsteuerung, für Beobachtung des Motorisierungstrendes). Darum ist diese Methode billiger als das traditionelle Verfahren. In diesen Methode haben wir zwei Möglichkeiten. Die erste - von Verkehrsstärkemessungen kann man O-D Matrix direkt schätzen. Und zweite Möglichkeit - zuerst rechnen wir die Verkehrserzeugungen und später O-D Matrix. Das zweite Verfahren hat einen wesentlichen Vorteil und zwar, anhand der Verkehrserzeugungen ist es möglich alle Elemente O-D Matrix zu rechnen. Bei der Schätzung der O-D Matrix unmittelbar von den Messungen (das erste Verfahren) bekommt man nur diese Elemente, die in den beobachtenen Straßenquerschnitten auftreten.
In diese Veröffentlichung werden die Kennziffern dargestellt, die zur Beurteilung der Struktur von Verkehrsnetzen behilflich sein können. Zu diesem Zweck wurde die Graphentheorie angewendet. Eine erste Gruppe von Bewertungen stützt sich auf die Anzahl der Knoten und Bögen des Netzes. Detailliertere Informationen über Engpässe oder Schwachstellen im Verkehrsnetz erhält man durch die Analyse der Kantenzusammenhangs. Die Unabhängigkeit der einzelnen Verkehrsarten , ihre Bewertung und Maßnahmen, sie zu verbessern werden vorgeschlagen und diskutiert. Weiteren Untersuchungen werden angeregt.
Die Sicherheit von Tragwerken hängt von der zuverlässigen Modellierung sämtlicher Tragwerksparameter ab. Üblicherweise werden diese Parameter als deterministische oder stochastische Größen beschrieben. Stochastische Größen sind Zufallsgrößen, die unscharfe Informationen über Tragwerksparameter mit Hilfe von Dichtefunktionen erfassen. Nicht alle unscharfen Tragwerksparameter lassen sich als Zufallsgrößen darstellen. Sie können jedoch als Fuzzy-Größen modelliert werden. Fuzzy-Größen beschreiben unscharfe Tragwerksparameter als unscharfe Menge mit Bewertungsfunktion (Zugehörigkeitsfunktion). Die Fuzzy-Modellierung im Bauingenieurwesen umfaßt die Fuzzifizierung, die Fuzzy-Analyse, die Defuzzifizierung und die Sicherheitsbeurteilung. Sie erlaubt es, Tragwerke mit nicht-stochastischen unscharfen Eingangsinformationen zu untersuchen. Nicht-stochastische Eingangsinformationen treten sowohl bei bestehenden als auch bei neuen Tragwerken auf. Die unscharfen Ergebnisse der Fuzzy-Modellierung gestatten es, das Systemverhalten zutreffender zu beurteilen; sie sind die Ausgangspunkte für eine neue Sicherheitsbeurteilung auf der Grundlage der Möglichkeitstheorie. Bei der Fuzzy-Analyse ist die alpha-Diskretisierung vorteilhaft einsetzbar. Bei fehlender Monotonie der deterministischen Berechnungen und unter Berücksichtigung der Nichtlinearität wird die Fuzzy-Analyse mit Optimierungsalgorithmen durchgeführt. Zwei Beispiele werden diskutiert: die Lösung eines transzendenten Eigenwertproblems und eines linearen Gleichungssystems. Die Systemantworten der Fuzzy-Analyse werden der Sicherheitsbeurteilung zugrunde gelegt. Für ausgewählte physikalische Größen werden Versagensfunktionen definiert. Diese bewerten die Möglichkeit des Versagens. Mit Hilfe von Min-max-Operationen der Fuzzy-Set-Theorie erhält man aus Versagensfunktion und Fuzzy-Antwort die Versagensmöglichkeit bzw. die Überlebensmöglichkeit. Die ermittelte Versagensmöglichkeit repräsentiert die subjektive Beurteilung der Möglichkeit, daß das Ereignis &qout;Versagen&qout; eintritt. Beispiele zeigen die Unterschiede zwischen der Sicherheitsbeurteilung mittels Fuzzy-Modells und mittels deterministischen Modells.
Die geometrische Modellierung hat in den Ingenieurwissenschaften eine große Bedeutung erlangt. Die Visualisierung von zwei- oder dreidimensionalen Problemstellungen ist aus heutigen Anwendungen nicht mehr wegzudenken. Zunehmend rücken Aufgabenstellungen aus dem Bereich der geometrischen Modellierung in den Vordergrund, die über die etablierten Dimensionen 1-3 hinausgehen und die nicht mehr rein geometrischer Natur sind. Hierzu zählen Aufgabenstellungen aus den Bereichen numerische Simulation, Parameteridentifikation und Strukturanalyse. Auf diese nicht-geometrischen Aufgabenstellungen sollen geometrische Verfahren, wie z.B. Triangulation, konvexe Hülle, geometrischer Schnitt und Interpolation angewendet werden. Hierzu werden diese Algorithmen, die alle auf der klassischen Geometrie des euklidischen Raumes beruhen, auf ihre Übertragbarkeit hin analysiert und überarbeitet. Am Beispiel einer Parameteridentifikation wird eine systematische Vorgehensweise vorgestellt, die es ermöglicht, trotz weniger Versuchsrechnungen den Bereich der in Frage kommenden Parameter umfassend zu beschreiben. Dies ermöglicht ein besseres Verständnis der Zusammenhänge der Parameter untereinander. Häufig existieren mehr als eine Parameterkombination, so daß diese eine Isolinie formen, die ihrerseits unendlich viele Lösungen des gestellten Problemes im Untersuchungsgebiet beschreibt.
Der Effekt des praktischen Einsatzes von CAD-Systemen im Stahlbau erschöpft sich heute weitgehend in einer Verbesserung der Qualität der Planungsunterlagen und in der Verkürzung der Bearbeitungszeiten. Dabei ist bei schwierigen individuellen Konstruktionen die Einsparung an Arbeitszeit oft nicht sehr markant gegenüber einer traditionellen Arbeitsweise. Die dreidimensionale Erfassung, Speicherung und Verarbeitung von Konstruktionsdaten im Rechner verlangt neben größeren Rechenleistungen neue Verfahren für die Behandlung dieser Daten. Die Möglichkeiten der Automatisierung stahlbautypischer Produktionsvorgänge und einer variablen, computergestützten Planung erfordern wissenschaftlich-technische Betrachtungen des Gesamtproblems. Ausgehend von den Anforderungen des Stahlbaus wird ein neues dreidimensionales Volumenmodell für den rechnergestützten Entwurf und die Konstruktion erarbeitet. Es werden grundlegende Methoden zur Problembehandlung aufgezeigt. Die Methodik basiert im wesentlichen auf der Methode der Inzidenz-Matrizen, um die Beziehungen zwischen topologischen und geometrischen Informationen eines Körpers darzustellen. Die Ermittlung der lokalen Mannigfaltigkeiten wird mit dem Euler-Polyedersatz verglichen und an Beispielen demonstriert. Eine neue Methode zur Ermittlung der lokalen Mannigfaltigkeiten wird dargestellt. Stahlbauspezifische Konstruktionen werden erzeugt und ihre Gestalt nach Anforderungen verändert. Im besonderen werden stahlbauspezifische Ausklinkungen und Verschneidungen erarbeitet und an Beispielen präsentiert.
A technique for using object-oriented technologies to write structural analysis software has been developed. The structural design information of an individual building is stored in an object-oriented database. A global database provides general design values as material data and safety factors. A class library for load elements has been evolved to model the transfer of loads in a building. This class library is the basis for the development of further classes for other structural elements such as beams, columns or slabs. A software has been developed to monitor the forces transferred from one structural member to another in a building for load cases and combinations according to Eurocode 1. The results of the analysis are stored in the projects database from which a structural design report may be generated. The software was developed under Microsoft Visual C++. The Microsoft Foundation Class Library (MFC) was used to program the Graphical User Interface (GUI). Object Linking and Embedding (OLE) technology is useful to include any type of OLE server objects for example texts written with a word processor or CAD drawings in the structural design report. The Object-Oriented Database Management System (OODBMS) ObjectStore provides services to store the large amount of objects.
A Product Model of a Road
(1997)
Many errors and delays frequently appear when data is exchanged between particular tasks in the lifecycle of the road. Inter-task connections are therefore of great importance for the quality of the final product. The article describes a product model of a road wich is the kernel of an integrated information system intended to support all important stages of the road lifecycle: design, evaluation (through different analysis procedures), construction, and maintainance. Since particular tasks are often executed at different places and in different companies, the interconnections are supported by a special metafile which contains all specific data of the product model. The concept of the integrated system is object and component oriented. Additionally, existing conventional program packages are included to support some common tasks (methods). A conventional relational database system as well as an open spatial database system with the relevant GIS functionality are included to support the data structures of the model.
Objektorientierte Modellierungstechniken werden gegenwärtig vor allem Entwicklern von CAD-Systemen angeboten. Sie erzeugen über die Schritte OO-Modellanalyse und OO-Softwaredesign OO-Programme, die mit ihrer Compilation das durch den Softwareingenieur gefundene Modell festschreiben. Generell, aber insbesondere im Bauwerksdesign, ist dieses Vorgehen unbefriedigend, da hier eine Normung von Modellen nicht gelingt, der Entwurfsprozeß vergleichsweise lang ist und eine Kooperation von Ingenieurgewerken mit verschiedenen Modelldomänen die Regel sind. Darüber hinaus weisen die Modelle in frühen Phasen ein hohes Maß an Unschärfe und Abstraktion auf. CAD-Tools, die diese Phasen unterstützen, benötigen deshalb: statt eines genormten Produktmodells ein einheitliches, kognitiv begründetes Modellstrukturierungsparadigma, für das mit der Objektorientierung eine mögliche Ausprägung gegeben ist, ein explizites, verfügbares Domänenmodell zur fortwährenden Interpretation von Bauwerksmodellen, deskriptive Elemente, die die Interpretation von Objekten und Attributen erleichtern, ein Konzept zur Behandlung von Unschärfe und Abstraktion. Hieraus ergeben sich für die Entwicklung von CAD-Systemen folgende Forderungen : Explizite Verfügbarkeit von Klassenobjekten und deren Erzeugung und Veränderung zur Laufzeit, Vererbung auf Klassen- und Instanzniveau, Erweiterte Attributkonzepte (Facetten), Unterstützung der Aggregation als einer wesentlichen Modellstrukturierungsrelation, Verfügbarkeit von OO-Schnittstellen zum Aufbau von CAD-Systemen aus Tools einerseits, sowie zur Trennung von Modellverwaltung und Modellrepräsentation andererseits. Als ein herausragendes Merkmal des Objektorientierten Paradigmas wird die Anwendungsnähe genannt, da Erscheinungen der behandelten Domäne sich analog in Modellen und Programmen wiederfinden (sollen). Unter der Grundannahme, daß dieses Paradigma auch durch den Anwender zur Erstellung seiner Modellwelten verwendet wird, will FLEXOB eine homogene Umgebung schaffen, die die Modellwelt des Softwareingenieurs zu Analysezwecken dem Anwender zur Verfügung stellt und die die Erweiterung dieser Modellwelt auf deskriptivem Niveau ermöglicht. Das Tool FLEXOB und einige wesentliche Implementationsdetails werden im Beitrag vorgestellt. Es handelt sich bei diesem Tools um eine C++ Klassenbibliothek, die entweder als Objektmodul oder als Windows-DLL verwendet werden kann. Aspekte des Nutzungsregimes solch flexibler Modellverwaltungen werden im Beitrag ebenfalls angespochen.
Für die Gestaltung einer durchgängigen Unterstützung des Entwurfsprozesses stehen gegenwärtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repräsentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen berücksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. Für ein echtes CADesign bildet dessen Klärung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise ähnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivitäten ergeben sich für: die Systematisierung computergestützter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsfähigen UNDO- bzw. TMS-Mechanismen.
There exists a big gap between the capabilities of current 3D-CAD applications and their actual usage in practice. Many architects and planners still prefer to draft in 2D because the benefits of 3D modeling are difficult to explain. This presentation offers a basis to view the 3D building model not merely as the source for 2D plan generation. By adding extra dimensions like Time and Cost to the 3D building model it becomes possible to generate dynamic information on building construction progress with regards to used material, resources and cost. These additional benefits are key elements to many planners and contractors and may therefore widen the acceptance of 3D building modeling in general.
In this Paper, we explored the relation between the electricity consumption in residential sector and the automobile energy consumption in transportation sector in accordance with the location of city by employing Geographic Information System (GIS). We found in the study that the electricity consumption per capita has a tendency that is higher in city center and lower in suburbs in Utsunomiya city. It is also noted that there is little difference among total consumption between city center and suburbs, despite the fact that the density of electric appliances tends to increase in a small size house of city center and the amount of automobile energy consumption from residence is lower in city center than in suburbs.
Digital maps are very easily applied as route guide maps. Route guide maps are provided through Web or a mobile phone services, and demand for such services is increasing. However, the production of a route guide map requires a great deal of time. Therefore, it is difficult for general users to make route guide maps. The purpose of the present research is the development of a system that can generate a route guide map using the Digital Map 2500 (Spatial Data Framework) published by the Geographical Survey Institute. This system will not require advanced equipment or expert knowledge. Therefore, anyone can produce route guide maps easily and quickly. By using the Digital Map 2500, the time and cost required in order to generate a map are reduced. Moreover, a useful route guide map can be created by simplifying the map form based on the human cognitive map.
A large-scale computer modeling and simulation method is presented for environmental flows in urban area. Several GIS and CAD data were used for the preparation of shape model and an automatic mesh generation method based on Delaunay method was developed. Parallel finite element method based on domain decomposition method was employed for the numerical simulation of natural phenomena. The present method was applied to the simulation of flood flow and wind flow in urban area. The present method is shown to be a useful planning and design tool for the natural disasters and the change of environments.
The paper introduced the research and application of the highway construction management information integrated system. Explained the development and application of highway survey applet run on mobile telephone supporting Java and the technique of transmitting engineering data by GPRS wireless network technology. And expounded the development and application of highway engineering construction field data collecting software run on Pocket-PC. Recommended the technique of engineering long distance data transmitting based on C/S structure adopting VPN (Virtual Private Networks) technology. Especially expatiated on the research on the platform of highway construction management information integrated system adopting geography information system (GIS) technique, database technique and network technique. And said all to subsystem about bid manage, contract management, engineering design drawing, engineering survey calculation, measure and pay, data processing on engineering experiment, quantity assessing, project plan and progress, engineering document management etc. Besides? proposed highway construction project visual analysis and inquiry system based on Web-GIS; Explained the research and application of highway engineering construction OA based on B/S structure; real-time workflow and information processing such as the management of administration, business and procedure of authorization and information distribution. At last, the author described the prospect of the application of C/S and B/S structure in trade software development in the highway construction management.
Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application.
Research on Establishment of a Standard of Traffic Impact Assessment with Integrated Database System
(2004)
Planning support systems, such as geographical information system (GIS) and traffic flow simulation models, are widely in use in recent urban planning research. In this paper we propose a method to apply traffic impact assessment (TIA) to large-scale, commercial developments. In TIA research we often encounter the problem of increasing amount of data that is necessary for detailed investigation and analysis, as the scale of commercial developments become larger and more complex. As a result, TIA presents two problems. The first problem is the difficulty of data acquisition. The second problem is the reliability of data. As a solution, we developed an integrated database system.
Modeling of Freeway Traffic
(2004)
An integrated modeling of freeway traffic is developed, whose implementation in an uniform computer –aided simulation model facilitate comparative evaluation and systematic coupling of several traffic simulations, traffic controls, traffic measurements and traffic scenarios. The integrated modeling of freeway traffic is a basic mapping of freeway networks, control methods, measurements and different simulations of traffic flow...
Development of Urban Land Use Model to Compare Transit-Oriented and Automobile-Oriented Cities
(2004)
This study is an attempt to develop a simple simulation model that can compare the differences between automobile-oriented and transit-oriented cities, and clarify the difference between city forms by transportation modes. Following a theoretical model development, a series of simulation runs are tried. The model allocates people who commute to CBD from residential zones along a transportation corridor. As a result of many simulation analyses, it is shown that automobiles need much more traffic space in comparison with the transit as is shown by the proposed traffic space ratio both in CBD and along the corridor.
This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction.
A wide variety of behavioural models exist in microscopic traffic simulation. Commercial programms often use closed-source policies and are confined to their respective simulation platforms. Open-source approaches mainly focus on distinctive, highly specialized traffic situations. In the scope of this paper, an open-source framework for developing modular, objectoriented simulation systems is presented, capable of simultaneously accommodating different driving models and enabling the user to modify and extend the catalogue of driving behaviours. The existing driving behaviours and the computational implementation of the simulation are being described.
This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique.
Effective knowledge management is increasingly considered as a cornerstone of sustainable business success. Knowledge management systems are strategically valuable for both ensuring consistency and continuous improvement of various aspects such as quality delivery, productivity and competitiveness. The small and medium enterprises (SMEs) in the construction industry are mostly operating under tighter timeframes, narrower profit margins and more constrained resources. Hence the recently commenced SMILE-SMC (Strategic Management with Information Leveraged Excellece for Small and Medium Contractors) project aims to support the information and knowledge management needs of the small and medium contractors in Hong Kong. This paper presents some snapshots on the SMILE-SMC project, and its conceptualized deliverables with some highlights of recent developments.
Civil engineering decision support systems (construction, building life cycle, refurbishment, total quality management, innovation, etc.) created in Lithuania are described in this paper. The above decision support systems comprise of the following constituent parts: data (database and its management system), models (model base and its management system) and a user interface. Presentation of information in databases may be in conceptual (digital, textual, graphical, photographic, video) and quantitative forms. Quantitative information presented involves criteria systems and subsystems, units of measurement, values and initial weight fully defining the variants provided. The databases were developed providing a multiple criteria analysis of alternatives from economical, infrastructure, technical, technological, qualitative, legislative, social and other perspectives. This information is provided in a user-oriented way. Since the analysis of alternatives is usually performed by taking into account economical, infrastructure, technical, technological, qualitative and other factors, a model-base include models which enable a decision maker to carry out a comprehensive analysis of the variants available and make a proper choice. These systems, related questions and practical case study were analysed the paper.
This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations.
Transport problems, as, for instance, the transport of sediment in hydraulic engineering and the transport of harmful substances through porous media, play an important role in many fields of civil engineering. Other examples include the dissipation of heat or sound as well as the simulation of traffic with macroscopic models. The contribution explains the analysis of the applicability of Voronoi-based finite volume methods for the approximation of solutions of transport problems. A special concern is the discretisation of the transport equation. Current limitations of the method as well as ideas for stabilisation are explained with examples.
Analysis System for Bridge Test (Chinese name abbr.: QLJC) is an application software specially designed for bridge test to analyze the static and dynamic character of bridge structures, calculate efficiency ratio of load test, pick up the results of observation points and so on. In this paper, research content, system design, calculation theory, characteristics and practical application of QLJC is introduced in detail.
The influence of vortex-induces vibrations on vertical tie rods has been proved as a determinant load factor in the lifetime-oriented dimensioning of arched steel bridges. Particularly, the welded connection plates between the suspenders and the arches often exhibit cracks induced primarily rods. In this context, the synchronization of the vortex-shedding to the rod motion in a critical wind velocity range, the so-called lock-in effect, is of essential interest.
The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...