Refine
Document Type
- Conference Proceeding (3)
- Article (2)
- Doctoral Thesis (2)
Institute
Keywords
- Beton (7) (remove)
Increasing structural robustness is the goal which is of interest for structural engineering community. The partial collapse of RC buildings is subject of this dissertation. Understanding the robustness of RC buildings will guide the development of safer structures against abnormal loading scenarios such as; explosions, earthquakes, fine, and/or long-term accumulation effects leading to deterioration or fatigue. Any of these may result in local immediate structural damage, that can propagate to the rest of the structure causing what is known by the disproportionate collapse.
This work handels collapse propagation through various analytical approaches which simplifies the mechanical description of damaged reinfoced concrete structures due to extreme acidental event.
The development of a consistent material model for textile reinforced concrete requires the formulation and calibration of several sub-models on different resolution scales. Each of these models represents the material structure at the corresponding scale. While the models at the micro-level are able to capture the fundamental failure and damage mechanisms of the material components (e.g. filament rupture and debonding from the matrix) their computational costs limit their application to the small size representative unit cells of the material structure. On the other hand, the macro-level models provide a sufficient performance at the expense of limited range of applicability. Due to the complex structuring of the textile reinforced concrete at several levels (filament - yarn - textile - matrix) it is a non-trivial task to develop a multiscale model from scratch. It is rather more effective to develop a set of conceptually related sub-models for each structural level covering the selected phenomena of the material behavior. The homogenized effective material properties obtained at the lower level may be verified and validated using experiments and models at the higher level(s). In this paper the development of a consistent material model for textile reinforced concrete is presented. Load carrying and failure mechanisms at the micro, meso and macro scales are described and models with the focus on the specified scales are introduced. The models currently being developed in the framework of the collaborative research center are classified and evaluated with respect to the failure mechanisms being captured. The micromechanical modeling of the yarn and bonding behavior is discussed in detail and the correspondence with the experiments focused on the selected failure and interaction mechanisms is shown. The example of modeling the bond layer demonstrates the application of the presented strategy.
The US Department of Highways is embarked on a very ambitious program to renovate much of the bridges and highways allover the USA. While it is doing so, it is also trying to take advantage of using such program to enhance the research for future programs. One of those projects is a 1000 ft. (305 m) long concrete bridge in the State of Vermont, located in the North East of USA. It is scheduled for renovation, in which the deck and its side parapet walls will be replaced. New England Transportation Consortium (NETC) decided to make further use of this project to find what effect will the heavy demolition tools have on the concrete to remain in place. The goal is to find out the extent of the experimental measurement agreement with the analytical results. In order to accomplish such a goal, numerous strain gages were installed at and in the vicinity of the demolition areas. Those gages will measure the effect of the demolition on the adjacent areas, and how far the destructive effect of the powerful demolition tools can propagate through different parts of the structure. The gages are connected to National Instruments data acquisition equipment, which is connected to a lap top computer to save all the acquired data. The analytical part the project will be using the energy method, which means that the energy applied by the demolition tools should equal the energy absorbed by the demolished structure, in elastic and plastic deformation forms.
The goal of the collaborative research center (SFB 532) >Textile reinforced concrete (TRC): the basis for the development of a new material technology< installed in 1998 at the Aachen University is a complex assessment of mechanical, chemical, economical and productional aspects in an interdisciplinary environment. The research project involves 10 institutes performing parallel research in 17 projects. The coordination of such a research process requires effective software support for information sharing in form of data exchange, data analysis and data archival. Furthermore, the processes of experiment planning and design, modification of material compositions and design parameters and development of new material models in such an environment call for systematic coordination applying the concepts of operational research. Flexible organization of the data coming from several sources is a crucial premise for a transparent accumulation of knowledge and, thus, for a successful research in a long run. The technical information system (TRC-TIS) developed in the SFB 532 has been implemented as a database-powered web server with a transparent definition of the product and process model. It serves as an intranet server with access domains devoted to the involved research groups. At the same time, it allows the presentation of selected results just by granting a data object an access from the public area of the server via internet.
Die Mahlung als Zerkleinerungsprozess stellt seit den Anfängen der Menschheit eine der wichtigsten Verarbeitungsformen von Materialien aller Art dar - von der Getreidemahlung, über das Aufschließen von Heilkräutern in Mörsern bis hin zur Herstellung von Tonern für Drucker und Kopierer. Besonders die Zementmahlung ist in modernen Gesellschaften sowohl ein wirtschaftlicher als auch ein ökologischer Faktor. Mehr als zwei Drittel der elektrischen Energie der Zementproduktion werden für Rohmehl- und Klinker- bzw. Kompositmaterialmahlung verbraucht. Dies ist nur ein Grund, warum der Mahlprozess zunehmend in den Fokus vieler Forschungs- und Entwicklungsvorhaben rückt. Die Komplexität der Zementmahlung steigt im zunehmenden Maße an. Die simple „Mahlung auf Zementfeinheit“ ist seit langem obsolet. Zemente werden maßgeschneidert, mit verschiedensten Kombinationsprodukten, getrennt oder gemeinsam, in unterschiedlichen Mahlaggregaten oder mit ganz neuen Ansätzen gefertigt. Darüber hinaus gewinnt auch der Sektor des Baustoffrecyclings, mit allen damit verbundenen Herausforderungen, immer mehr an Bedeutung. Bei der Fragestellung, wie der Mahlprozess einerseits leistungsfähige Produkte erzeugen kann und andererseits die zunehmenden Anforderungen an Nachhaltigkeit erfüllt, steht das Mahlaggregat im Mittelpunkt der Betrachtungen. Dementsprechend gliedert sich, neben einer eingehenden Literaturrecherche zum Wissensstand, die vorliegende Arbeit in zwei übergeordnete Teile:
Im ersten Teil werden Untersuchungen an konventionellen Mahlaggregaten mit in der Zementindustrie verwendeten Kernprodukten wie Portlandzementklinker, Kalkstein, Flugasche und Hüttensand angestellt. Um eine möglichst effektive Mahlung von Zement und Kompositmaterialien zu gewährleisten, ist es wichtig, die Auswirkung von Mühlenparametern zu kennen. Hierfür wurde eine umfangreiche Versuchsmatrix aufgestellt und
abgearbeitet. Das Spektrum der Analysemethoden war ebenfalls umfangreich und wurde sowohl auf die gemahlenen Materialien als auch auf die daraus hergestellten Zemente und Betone angewendet. Es konnte gezeigt werden, dass vor allem die Unterscheidung zwischen Mahlkörpermühlen und mahlkörperlosen Mühlen entscheidenden Einfluss auf die Granulometrie und somit auch auf die Zementperformance hat. Besonders stark wurden die Verarbeitungseigenschaften, insbesondere der Wasseranspruch und damit auch das Porengefüge und schließlich Druckfestigkeiten sowie Dauerhaftigkeitseigenschaften der aus diesen Zementen hergestellten Betone, beeinflusst. Bei Untersuchungen zur gemeinsamen Mahlung von Kalkstein und Klinker führten ungünstige Anreicherungseffekte des gut mahlbaren Kalksteins sowie tonigen Nebenbestandteilen zu einer schlechteren Performance in allen Zementprüfungen.
Der zweite Teil widmet sich der Hochenergiemahlung. Die dahinterstehende Technik wird seit Jahrzehnten in anderen Wirtschaftsbranchen, wie der Pharmazie, Biologie oder auch Lebensmittelindustrie angewendet und ist seit einiger Zeit auch in der Zementforschung anzutreffen. Beispielhaft seien hier die Planeten- und Rührwerkskugelmühle als Vertreter genannt. Neben grundlegenden Untersuchungen an Zementklinker
und konventionellen Kompositmaterialien wie Hüttensand und Kalkstein wurde auch die Haupt-Zementklinkerphase Alit untersucht. Die Hochenergiemahlung von konventionellen Kompositmaterialien generierte zusätzliche Reaktivität bei gleicher Granulometrie gegenüber der herkömmlichen Mahlung. Dies wurde vor allem bei per se reaktivem Zementklinker als auch bei latent-hydraulischem Hüttensand beobachtet. Gemahlene Flugaschen konnten nur im geringen Maße weiter aktiviert werden. Der generelle Einfluss von Oberflächenvergrößerung, Strukturdefekten und Relaxationseffekten eines Mahlproduktes wurden eingehend untersucht und gewichtet. Die Ergebnisse bei der Hochenergiemahlung von Alit zeigten, dass die durch Mahlung eingebrachten Strukturdefekte eine Erhöhung der Reaktivität zur Folge haben. Hierbei konnte festgestellt werden, das maßgeblich Oberflächendefekte, strukturelle (Volumen-)defekte und als Konterpart Selbstheilungseffekte die reaktivitätsbestimmenden Faktoren sind. Weiterhin wurden Versuche zur Mahlung von Altbetonbrechsand durchgeführt. Im Speziellen wurde untersucht, inwieweit eine Rückführung von Altbetonbrechsand, als unverwertbarer Teil des Betonbruchs, in Form eines Zement-Kompositmaterials in den Baustoffkreislauf möglich ist. Die hierfür verwendete Mahltechnik umfasst sowohl konventionelle Mühlen als auch Hochenergiemühlen. Es wurden Kompositzemente mit variiertem Recyclingmaterialanteil hergestellt und auf grundlegende Eigenschaften untersucht. Zur Bewertung der Produktqualität wurde der sogenannte „Aktivierungskoeffizient“ eingeführt. Es stellte sich heraus, dass die Rückführung von Altbetonbrechsand als potentielles Kompositmaterial wesentlich vom Anteil des Zementsteins abhängt. So konnte beispielsweise reiner Zementstein als aufgemahlenes Kompositmaterial eine bessere Performance gegenüber dem mit Gesteinskörnung beaufschlagtem Altbetonbrechsand ausweisen. Bezogen auf die gemessenen Hydratationswärmen und Druckfestigkeiten nahm der Aktivierungskoeffzient mit fallendem Abstraktionsgrad ab. Ebenfalls sank der Aktivierungskoeffizient mit steigendem Substitutionsgrad. Als Vergleich wurden dieselben Materialien in konventionellen Mühlen aufbereitet. Die hier erzielten Ergebnisse können teilweise der Hochenergiemahlung als gleichwertig beurteilt werden. Folglich ist bei der Aktivierung von Recyclingmaterialien weniger die Mahltechnik als der Anteil an aktivierbarem Zementstein ausschlaggebend.
Scaling of concrete due to salt frost attack is an important durability issue in moderate and cold climates. The actual damage mechanism is still not completely understood. Two recent damage theories—the glue spall theory and the cryogenic suction theory—offer plausible, but conflicting explanations for the salt frost scaling mechanism. The present study deals with the cryogenic suction theory, which assumes that freezing concrete can take up unfrozen brine from a partly frozen deicing solution during salt frost attack. According to the model hypothesis, the resulting saturation of the concrete surface layer intensifies the ice formation in this layer and causes salt frost scaling. In this study an experimental technique was developed that makes it possible to quantify to which extent brine uptake can increase ice formation in hardened cement paste (used as a model material for concrete). The experiments were carried out with low temperature differential scanning calorimetry, where specimens were subjected to freeze–thaw cycles while being in contact with NaCl brine. Results showed that the ice content in the specimens increased with subsequent freeze–thaw cycles due to the brine uptake at temperatures below 0 °C. The ability of the hardened cement paste to bind chlorides from the absorbed brine at the same time affected the freezing/melting behavior of the pore solution and the magnitude of the ice content.
Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration
(2023)
Structures and their components experience substantially large vibration amplitudes at resonance, which can cause their failure. The scope of this study is the utilization of silicone-coated steel balls in concrete as damping aggregates to suppress the resonance vibration. The heavy steel cores oscillate with a frequency close to the resonance frequency of the structure. Due to the phase difference between the vibrations of the cores and the structure, the cores counteract the vibration of the structure. The core-coating inclusions are randomly distributed in concrete similar to standard aggregates. This mixture is referred to as metaconcrete. The main goal of this work is to validate the ability of the inclusions to suppress mechanical vibration through laboratory experiments. For this purpose, two small-scale metaconcrete beams were cast and tested. In a free vibration test, the metaconcrete beams exhibited a larger damping ratio compared to a similar beam cast from conventional concrete. The vibration amplitudes of the metaconcrete beams at resonance were measured with a frequency sweep test. In comparison with the conventional concrete beam, both metaconcrete beams demonstrated smaller vibration amplitudes. Both experiments verified an improvement in the dynamic response of the metaconcrete beams at resonance vibration.