Refine
Document Type
- Conference Proceeding (336) (remove)
Institute
- Professur Informatik im Bauwesen (336) (remove)
Keywords
- Modellierung (49)
- Bauwerk (39)
- Verteiltes System (36)
- CAD (31)
- Finite-Elemente-Methode (24)
- Architektur (21)
- Computerunterstütztes Verfahren (21)
- Baubetrieb (17)
- Ingenieurbau (17)
- Internet (17)
This paper will present a number of technical aspects for one of the most elaborate instrumentation and data acquisition projects ever undertaken in Canada. Confederation Bridge, the longest bridge built over ice covered seawater has been equipped with the state of the art data acquistition devices and systems as well as data transfer networks. The Bridge has been providing a fixed surface connection between Prince Edward Island and Province of New Brunswick in Canada since its opening in 1997. The Bridge has a rather long design service life of 100 years. Because of its large size and long span length, its design is not covered by any existing codes or standards worldwide. The focus of the paper is to introduce the data acquisition, transfer, processing and management systems. The instrumentation and communications infrastructure and devices will be presented in some details along with the data processing and management systems and techniques. Teams of engineers and researchers use the collected data to verify the analysis and design assumptions and parameters as well as investigate the short-term and long-term behaviour and health of the Bridge. The collected data are also used in furthering research activities in the field of bridge engineering and in elevating our knowledge about behaviour, reliability and durability of such complex structures, their components and materials.
Die Aufgaben des Bauingenieurwesens sind dadurch geprägt, daß sowohl die Planung als auch die Ausführung von Bauwerken häufigen Änderungen unterliegen. Beschreibt man das Verhalten der Bauwerke und den Bauprozeß im Computer mit Modellen, so ändern sich Umfang und Struktur der Modelle als Folge der Änderung in Planung und Ausführung. Diesen Vorgang nennt man Dynamisierung des Modells. Die Dynamisierung führt zu Veränderungen und Inkonsistenzen in den Modellen der Anwendungen. Die Aktualisierung und Abstimmung von Beziehungen innerhalb eines Modells sowie die Sicherung der Konsistenz der Modelle untereinander sind daher von zentraler Bedeutung für die Lösung von Bauingenieuraufgaben. Seit den letzten 10 Jahren wird die objektorientierte Methode in der Modellierung für Anwendungen im Bauingenieurwesen intensiv entwickelt und eingesetzt. Es hat sich gezeigt, daß die Anwendung dieser Methode in wichtigen Bereichen der Modellierung zu Verbesserungen führt. Gleichzeitig hat sich aber auch herausgestellt, daß die für das Bauingenieurwesen wichtigen Aspekte der Aktualisierung und der Konsistenz nicht zweckmäßig beschreibbar sind. In diesem Beitrag wird eine einfache Modelliermethode in ihrem Konzept und ihrer Realisierung gezeigt, mit der sich die Aktualisierung von Objekten und Modellen sowie die Sicherstellung der Konsistenz in Systemen des Bauingenieurwesens bearbeiten lassen.
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. In dem Beitrag wird ein Konzept und prototypische Realisierung für die durchgängige Unterstützung des gesamten Bauaufnahmeprozesses für Altbausubstanz vorgestellt und diskutiert. Der Fokus liegt auf der frühe Phase in der Bauaufnahme als ein Baustein in einer gesamtheitlichen IT-gestützen Planungsumgebung eingegangen. Durch gezielte Aufnahme planungsrelevanter Parameter und Auswertung hinsichtlich Wirtschaftlichkeit und Wiederverwendbarkeit bzw. der Variantenüberprüfung von Nutungskonzepten, werden gerade in dieser Phase wesentliche Entscheidungen für eine kostengünstige Planung getroffen werden. In der Veröffentlichung wird der Fokus auf folgende Punkte gesetzt: - Strukturierung und Aufnahme der Informationen während der Erstbegehung - Skizzenhafte Abbildung als Basis für die Formulierung erster Entwurfsintensionen/ Variantenuntersuchungen - Navigations- und Informationsumgebung - gezielte Auswertungsmöglichkeiten (bspw. Wirtschaftlichkeitsberechnung, Wiederverwendung von Bauteilen, Kalkulation von Abrissmengen)
Cost and Schedule Controlling in Relation to Liquidity Management during Construction Projects
(2004)
The present paper describes a software application which can be used for relating the scheduled events of a construction project with the respective financial parameters, leading to an overall improvement in general controlling and liquidity management. For this purpose, existing construction schedules are taken and details of the assignment are recorded. Thus it becomes possible to assess a future payment status should changes in the designated schedule occur.
The contribution introduces an adaptable process model to meet the special requirements of the coordination of planning activities in AEC (Architecture, Engineering, Construction). The process model is based on the concept of Coloured Petri-Nets and uses metainformation to characterize process-relevant information and to enable process-control based on the actual results of the planning.
As it is well known, the approximation theory of complex valued functions is one of the main fields in function theory. In general, several aspects of approximation and interpolation are only well understood by using methods of complex analysis. It seems natural to extend these techniques to higher dimensions by using Clifford Analysis methods or, more specific, in lower dimensions 3 or 4, by using tools of quaternionic analysis. One starting point for such attempts has to be the suitable choice of complete orthonormal function systems that should replace the holomorphic function systems used in the complex case. The aim of our contribuition is the construction of a complete orthonormal system of monogenic polynomials derived from a harmonic function system by using sistematically the generalized quaternionic derivative
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 'Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken' entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Vor dem Hintergrund zunehmender Komplexität der Bauaufgaben steigt die Zahl der an einem Projekt Beteiligten und deren örtliche Verteilung. Planungsvorhaben sind dadurch verstärkt gekennzeichnet durch einen erhöhten Aufwand in Planungskoordination, -organisation und Kommunikation. Globale Computernetzwerke - das Internet - bieten Potential zur Lösung dieser Aufgaben. Vor diesem Hintergrund sind in der letzten Zeit eine Vielzahl von Systemen die sich unterschiedlichsten Techniken bedienen entstanden. Allen diesen Systemen gemein ist die Vision der Optimierung des Planungsprozesses, Vereinfachung der Kommunikation und die Verbesserung des Zeitmanagements. Aus Sicht der Architekten stellt sich die Situation derzeit als ambivalent dar: Einerseits sind die Ideen, die den 'IBPM - Systemen' zugrunde liegen, nachvollziehbar und offerieren einen sofort messbaren Nutzen. Auf der anderen Seite stehen vielfältige Aspekte, die den uneingeschränkten Einsatz dieser Systeme augenscheinlich verhindern. Ein Focus bei der Beleuchtung dieser Schwachstellen liegt auf dem omnipräsentem Problem der mangelhaften Unterstützung graphischer Daten als die bedeutendste Informationsgrundlage im Planungsprozess. Aus der konkreten, fachspezifischen Analyse des Planungsprozesses, der Untersuchung potentieller Entwicklungsmöglichkeiten vorhandener Systeme und der intensiven Auseinandersetzung mit neuen Internettechnologien entstand im Zuge dieses Forschungsschwerpunktes eine architekturpraxisnahe Applikation, die das Internet weg vom reinen Präsentationsmedium, über ein reines Kommunikationsmittel hinaus, hin zu einer leistungsfähigen interaktiven Schnittstelle für alle am Entwurfs- und Planungsprozess Beteiligten erschließt.
The paper describes a development of the analytical finite strip method (FSM) in displacements for linear elastic static analysis of simply supported at their transverse ends complex orthotropic prismatic shell structures with arbitrary open or closed deformable contour of the cross-section under general external loads. A number of bridge top structures, some roof structures and others are related to the studied class. By longitudinal sections the prismatic thin-walled structure is discretized to a limited number of plane straight strips which are connected continuously at their longitudinal ends to linear joints. As basic unknowns are assumed the three displacements of points from the joint lines and the rotation to these lines. In longitudinal direction of the strips the unknown quantities and external loads are presented by single Fourier series. In transverse direction of each strips the unknown values are expressed by hyperbolic functions presenting an exact solution of the corresponding differential equations of the plane straight strip. The basic equations and relations for the membrane state, for the bending state and for the total state of the finite strip are obtained. The rigidity matrix of the strip in the local and global co-ordinate systems is derived. The basic relations of the structure are given and the general stages of the analytical FSM are traced. For long structures FSM is more efficient than the classic finite element method (FEM), since the problem dimension is reduced by one and the number of unknowns decreases. In comparison with the semi-analytical FSM, the analytical FSM leads to a practically precise solution, especially for wider strips, and provides compatibility of the displacements and internal forces along the longitudinal linear joints.
Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used.
Designing lightings in a 3D-scene is a general complex task for building conception as it is submitted to many constraints such as aesthetics or ergonomics. This is often achieved by experimental trials until reaching an acceptable result. Several rendering softwares (such as Radiance) allow an accurate computation of lighting for each point in a scene, but this is a long process and any modification requires the whole scene to be rendered again to get the result. The first guess is empirical, provided by experience of the operator and rarely submitted to scientific considerations. Our aim is to provide a tool for helping designers to achieve this work in the scope of global illumination. We consider the problem when some data are asked for : on one hand the mean lighting in some zones (for example on a desktop) and on the other hand some qualitative information about location of sources (spotlights on the ceiling, halogens on north wall,...). The system we are conceiving computes the number of light sources, their position and intensities, in order to obtain the lighting effects defined by the user. The algorithms that we use bind together radiosity computations with resolution of a system of constraints.
Computational Steering provides methods for the integration of modeling, simulation, visualization, data analysis and post processing. The user has full control over a running simulation and the possibility to modify objects (geometry and other properties), boundary conditions and other parameters of the system interactively. The objective of such a system is to explore the effects of changes made immediately and thus to optimize the target problem interactively. We present a computational steering based system for fluid flow problems in civil engineering. It is based on three software components as shown in figure 1. The modeler is the CAD-system AutoCAD, which offers a powerful programming interface allowing an efficient access to the geometric data. It also offers convenient manipulators for geometric objects. The simulation kernel is a Lattice-Boltzmann (LB) solver for the Navier-Stokes equations, which is especially suitable for instationary flows in complex geometries. For the visualization and postprocessing we use the software tool AVS, which provides a powerful programming interface and allows the efficient visualization of flow fields. These three components are interconnected through two communication modules and three interfaces as depicted in figure 1. Interface 1 is responsible for the transformation of the modified system for the simulation kernel, interface 2 is responsible for the proper preparation of the simulation data whereas interface 3 transforms the data from the modeler into a format suitable for the visualization system. The whole system is synchronized by the two communication modules.
COMPARISON OF SOME VARIANTS OF THE FINITE STRIP METHOD FOR ANALYSIS OF COMPLEX SHELL STRUCTURES
(2000)
The subject of this paper is to explore and evaluate the semi-analytical, analytical and numerical versions of the finite strip method (FSM) for static, dynamic and stability analyses of complex thin-walled structures. Many of bridge superstructures, some roof and floor structures, reservoirs, channels, tunnels, subways, layered shells and plates etc. can be analysed by this method. In both semi-analytical and analytical variants beam eigenvalue vibration or stability functions, orthogonal polynomials, products of these functions are used as longitudinal functions of the unknowns. In the numerical FSM spline longitudinal displacement functions are implemented. In the semi-analytical and numerical FSM conventional transverse shape functions for displacements are used. In the analytical FSM the accurate function of the strip normal displacement and the plane stress function are applied. These three basic variants of the FSM are compared in quality and quantity in view to the following: basic ideas, modelling, unknowns, DOF, a kind and order of the strips, longitudinal and transverse displacement and stress functions, compatibility requirements, boundary conditions, ways for obtaining of the strip stiffness and load matrices, a kind and size of the structure stiffness matrix and its band width, mesh density, necessary number of terms in length, accuracy and convergence of the stresses and displacements, approaches for refining results, input and output data, computer resources used, application area, closeness to other methods, options for future development. Numerical example is presented. Advantages and shortcomings are pointed. Conclusions are given.
Am Fraunhofer ISE wurde in den letzten Jahren die Simulationsumgebung ColSim entwickelt, die sich speziell zur Untersuchung von Regelungssystemen in Gebäudeenergieversorgungssystemen eignet. Zielsetzung des Designs ist die Umsetzung des simulationsbasierten Regelungsentwurfs, der einen unmittelbaren Einsatz der Regelungsmodule auf sog. Enbedded Systems gestattet. Das Simulationswerkzeug zeichnet sich durch die modulare offene Struktur aus, die eine flexible Erweiterung ermöglicht (vgl. TRNSYS [1]). Die Implementierung erfolgte im genormten ANSI-C Code, der einen plattform- unabhänigen Einsatz gewährleistet. Entwicklungsplattform stellt derzeit ein Linux Cluster dar, als Zielplattform wurden bisher sowohl eingebettete Industrie-PCs wie auch klassische Micro- controller Boards verwendet. Die Entwurfsmethode wird anhand einer Systemregelung für eine solarthermische Anlage mit 120m2 Kollektorfläche (SolarThermie2000 Anlage) demonstriert, bei der ein vernetztes Regelungssystem mit Internet-Integration zum Einsatz kommt. Das Regelungssystem verfügt seinerseits über ein Betriebssystem (schlankes embedded linux system), das die Kommunikation nach aussen gestattet. Das Regelungssystem vefügt somit über Klima- bzw Strahlungsdaten, die für den Regelungsprozess von Bedeutung sind. Die externen Informationen können einerseits zur >Einsparung< von Sensorik genutzt werden, andererseits gestatten sie den Einsatz von prädiktiver Regelungsmethodik, um den fossilen (Nachheiz-) Energieeinsatz zu minimieren. Mit Hilfe von simulationstechnischen Systemstudien kann ein adaptives Verhalten des Regelungssystems erprobt werden, das eine selbstständige Strecken- identifikation realieren kann. Beispielsweise soll beim näher beschriebenen solarthermischen System die Totzeit bestimmt werden, die sich infolge der Verrohrung zwischen Speicher und Entladegruppe ergibt. Der Betrieb der Entlade- pumpe wird einerseits in Abhängigkeit der Verfügbarkeit des Pufferwassers erfolgen, andererseits in Abhängigkeit des erwarteten Zapfvolumens durch den Verbraucher. Die vernetzten Regelungssysteme, die auf Basis der Simulationsmodelle ent- wickelt werden, sollen künftig die gesamte Energieflußanalyse des Gebäudes realisieren, wobei eine transparente Darstellung des Systemverhaltens auf Basis einer Internet Visualisierung erfolgt. Der Betreiber und Nutzer wird unmittel- bar durch die Online Dienste (SMS,Email,Fax) über das (fehlerhafte) Anlagen- verhalten informiert. Gerade die sensitiven regenerativen Systeme neigen durch ihre Komplexität zu Störungen, die oftmals nicht erkannt werden, weil die konventionellen Teilsysteme (z.B. Ergasbrenner) den Ausfall in der Regel >kompensieren<.
A/E/C Team members, while collaborating on building projects, rely on past experiences and content through the use of project design archives (whether in paper or digital format). This leads to underutilization of potential knowledge, as decision-making of data, information, and knowledge reuse is limited by access to these archives, due to sheer size and inconvenient presentation. This paper presents an integrated solution that leverages two technologies CoMem (Corporate Memory) and iRoom (interactive Room) developed at Stanford. This addresses critical limitations, i.e., content, context, visualization and interactivity, constraining the process of collaborative exploration towards knowledge reuse and decision-making.
In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI).
Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design
(2004)
The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students.
The construction industry is a project-based business bringing together many different organisations to complete a desired goal. The strategic use of Information and Communication Technologies (ICT) has enabled this goal to be completed more effectively. Two issues require addressing, the technology itself and the implementation factors of the technology. Such implementation factors should consider, among other factors, the legal and contractual issues associated with the use of ICT, training requirements and its effects on the organisational culture. To date the legal and contractual issues have not been extensively covered, and it is recognised that the technologies have not been properly covered by any recognised legal and contractual practices. This in turn is threatening to inhibit the growth and prosperity of the use of the technology on construction projects. This paper discusses these legal and contractual issues and describes methods and tools that can be used to enable the growth of technology to be used in a legal and contractually valid environment.
Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator
(2004)
A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment.
Beside the standard calculation programs for civil engineering buildings mathematical programs have been lately established for the solution of differential equations for the analysis of mechanical and static systems. Programs like Maple, Matlab, MathCAD and Mathematica are popular in this field. To the knowledge of the authors, the widest application functionality offers the program Maple. Its advantages are, e.g. the alternatively symbolic or numerical solution of differential equation systems, the easy handling of parameter studies, the immediate visualization of results, the definition of macros for selected calculation steps and their export in other computer languages and, not least, the automatically generated, very clear documentation of the matehematical calculus.
In Bauplanungssystemen können XML-Technologien in vielen Bereichen eingesetzt werden mit dem Ziel, diese Systeme modular und webfähig zu gestalten. Der Einsatz lohnt als Basis-Datenstruktur für verschiedene rechnerinterne Modelle, Steuerungsstruktur für Customizing von Anwendungen, Bindeglied zwischen objektbasierten Systemen, Kommunikationsprotokoll zwischen Komponenten. Es ist möglich, komplexe Objekte aus dem Planungsalltag mittels XML arzustellen, zu speichern und zu verarbeiten. Es ist möglich, entsprechende Komponenten im Netz zu verteilen bzw. über Internet zu verbinden. Die heute dominierende Sicht auf XML als Austauschmedium wird ergänzt um die Idee eines XML-basierten Systems: Entwurfsobjekte können als >XML-Objekte< formuliert und im Sinne eines late binding verwendet werden.
Review of Discrete Optimization Techniques for CAD Discrete optimization in the structure design Morphological method The alternative graph approach Convex discrete optimization without objective function Matroidal Decomposition in design Decomposition of layered matrices Discrete Optimization in Designing Packing problem Optimal arrangement of rectangles and shortest paths in L1-metrics Partition problems Discrete optimization in computational geometry and computer graphics Maxima of a point set on the plane Triangulation One of the main problems in computer graphics is removing hidden lines and surfaces
We describe the database requirements of SEED (Software Environment to Support the Early Phases in Building Design). The requirements are typical for a database that intends to support a heterogeneous design support environment consisting of independent software modules with diverse internal design models, requirements not met by any commercial database system. The design and implementation of this database is an integral part of the overall software engineering effort. We describe the SEED approach that integrates external and in-house software based on a shared information model specified in the modeling language SPROUT, which allows for the specification of domains, and classes, relationship types and their behavior, and multiple classifications. The SPROUT run-time system organizes and coordinates the communication between the software modules and the database
To support research in the building sector and in order to help it move towards a new digital economy, the European Commission under the 5th Framework initiative, especially the IST programme, funded various RTD projects. The opportunity to bring these IST projects together was acknowledged so that stronger links can be created under a clustering umbrella and that, moreover, links of those projects with their RTD environment could be facilitated. This has been the objective of work carried out within the ICCI (IST-2001-33022) Cluster project. This paper introduces the main aims and objectives of the project, and then presents its principal outcomes. In a second part, it synthesises the underlying concepts, technology and tools that will make ICT-based Construction a reality in a near future, and gives recommended actions for the industry, the EC and the Construction ICT R&D in Europe, giving some benefit of this project experience to the three communities.
Die Planung von komplexen Bauwerken erfolgt zunehmend mit Planungswerkzeugen, die den Export von Bauwerksinformationen im STEP-Format auf Grundlage der IFC (Industry Foundation Classes) erlauben. Durch die Verfügbarkeit dieser Schnittstelle ist es möglich, Bauwerksinformationen für die weiterführende Verarbeitung zu verwenden. Zur Visualisierung der geometrischen Daten stehen innerhalb der IFC verschiedene geometrische Modelle für die Darstellung von Bauteilen zur Verfügung. Unter anderem werden für das „Ausschneiden“ von Öffnungen aus Bauteilen (z.B. für Fenster und Türen) geometrische boolesche Operationen benötigt.
Gegenstand des Beitrags ist die Vorstellung eines Algorithmus zur Berechnung von booleschen Operationen auf Basis eines triangulierten B-Rep (Boundary Representation) Modells nach HUBBARD (1990). Da innerhalb von IFC-Gebäudemodellen Bauteile oft das Resultat mehrerer boolescher Operationen sind (z.B. um mehrere Fensteröffnungen von einer gegebenen Wand abzuziehen), wurde der Algorithmus von Hubbard angepasst, sodass mehrere boolesche Operationen gleichzeitig berechnet werden können. Durch diese Optimierung wird eine deutliche Reduzierung der benötigten Berechnungen und somit der Rechenzeit erreicht.
In der vorliegenden Arbeit geht es um die Anwendung von biorthogonalen Waveletsystemen in der Parameteridentifikation. Es sollen Grundlagen geschaffen werden, um bei der Auswertung dynamischer Experimente derartige Wavelets und damit die schnelle Wavelet-Transformation (FWT) systematisch und effektiv zu nutzen. Zu diesem Zweck wird von den Waveletfiltern ein System von Verbindungskoeffizienten abgeleitet. Mit deren Hilfe erfolgen die Projektionen von Operatoren, insbesondere die von Differentiations- und Integrationsoperatoren, in die entsprechenden Wavelet-Räume. Sämtliche Verbindungskoeffizienten können rekursiv und in endlich vielen Schritten exakt berechnet werden. Ausgehend von den dynamischen Krafteinwirkungen und den gemessenen Reaktionsbeschleunigungen oder Reaktionsgeschwindigkeiten bezüglich der einzelnen Freiheitsgrade können dann unbekannte Steifigkeiten und Dämpfungen identifiziert werden. Dazu erfolgt nach entsprechenden Wavelet-Zerlegungen aller relevanten Zeitsignale ein Abgleich auf den einzelnen Frequenzbändern. Dieser führt insbesondere zu einem System von linearen Matrizengleichungen zur Bestimmung der unbekannten Parameter. Vorgeschlagen wird im Falle einer größeren Zahl von Freiheitsgraden und Parametern, ein mehrstufiges Optimierungsverfahren anzuwenden. Gegenüber Identifikationsverfahren im Zeitbereich werden aufwendige numerische Quadraturverfahren und die daraus resultierenden Fehlerquellen und Stabilitätsprobleme vermieden. Gegenüber Verfahren im Frequenzbereich, die ausschließlich mit Hilfe der FFT formuliert werden, sind Störungen in den Randspektren besser beherrschbar und eliminierbar. Außerdem werden mit einem FWT-Verfahren einfachere Denoising-Algorithmen anwendbar. Letztendlich wird im Vergleich zu einem FFT-Verfahren ein späterer Übergang zur Identifikation nichtlinearer MDOF-Systeme methodisch erleichtert.
Bewertung der Grenzlast von elastisch-plastischen Tragwerken mit Hilfe stochastischer Methoden
(1997)
Für die Analyse von Tragwerken sowohl des Stahlbaus als auch des Massivbaus eröffnet die nationale und internationale Normengebung in zunehmendem Maße die Anwendung physikalisch nichtlinearer Berechnungsmodelle. Es ist zu erwarten, daß neben dem traditionellen elastischen Berechnungsmodell das linearelastisch-idealplastische Materialmodell in die Tragwerksanalyse Eingang finden wird. Während bei den traditionellen Berechnungsverfahren auf der Grundlage der Elastizitätstheorie hinreichende Erfahrungen durch die Planungspraxis bestehen und umfangreiche Untersuchungen zur dabei erreichten Sicherheit vorliegen, stellen die nichtlinearen Berechnungsmethoden sowohl in mechanischer als auch in sicherheitstheoretischer Hinsicht ein neues Erfahrungsfeld dar. Im vorliegenden Beitrag werden aus der Vielzahl der anstehenden Probleme folgende Teilprobleme behandelt: Bestimmung der Versagenswahrscheinlichkeit elasto-plastischer Tragsysteme nach dem Kriterium der plastischen Grenzlast Ermittlung stochastischer Eigenschaften des plastischen Grenzlastparameters elasto-plastischer Tragsysteme. Die Lösung des mechanischen Problems geschieht über eine lineare Optimierungsaufgabe, die nach dem statischen Theorem der plastischen Grenzlast formuliert ist. Als stochastische Methode wird die Simulation angewandt, die zum einen auf einer zufälligen Erzeugung der Realisierungen (stochastische Simulation) und zum anderen auf einer planmäßigen Erzeugung der Realisierungen (konstruktive Simulation) beruhen kann. Für jedes der Teilprobleme wird ein Beispiel vorgestellt.
Werden bei der Tragwerksauslegung Schnittgrößenumlagerungen infolge Plastizierungen zugelassen, dann ist die Lastintensität durch die Einhaltung von entsprechenden Grenzzustandskriterien, passend zum physikalisch nichtlinearen Tragverhalten, zu begrenzen. Für Tragwerke, die von mehreren unabhängig voneinander, wiederholt und in beliebiger Reihenfolge auftretenden Lasten beansprucht werden, stellt die adaptive Grenzlast (Einspiellast), ausgedrückt durch den adaptiven Grenzlastfaktor, ein geeignetes Grenzzustandskriterium dar. Bedingt durch zufällige Systemeigenschaften und zeitlich zufälliges Lastverhalten stellt der adaptive Grenzlastfaktor eine Zufallsgröße dar. Für die Bestimmung des stochastischen adaptiven Grenzlastfaktors und der Versagenswahrscheinlichkeit gegenüber dem Grenzzustand der Adaption für einen Zeitraum [0,T] werden die mathematische Optimierung (mechanische Problemlösung) und die Monte-Carlo-Simulation (stochastische Problemlösung) herangezogen, wobei eine Überführung von zeitvarianten Lastmodellen in äquivalente zeitinvariante Lastmodelle erforderlich wird. Am Beispiel eines eingespannten Stahlbetonrahmens wird untersucht, wie sich eine unterschiedliche stochastische Modellbildung des Tragwerks und eine unterschiedliche Vorgehensweise bei der Überlagerung von Extremwerten der Belastung auf die Beurteilung der Versagenswahrscheinlichkeit des Tragwerks für verschiedene Lebensdauern auswirken. Im Ergebnis dieser Untersuchungen zeigt sich, dass sich die Versagenswahrscheinlichkeit signifikant erhöht, wenn stochastische Tragwerkseigenschaften in Ansatz gebracht werden. Die größte Bedeutung besitzt dabei die Zufälligkeit der Zugfestigkeit der Bewehrung. Alle anderen Zufallsgrößen beeinflussen die Versagenswahrscheinlichkeit nur in ihrer Gesamtheit, einzeln betrachtet sind sie nahezu bedeutungslos. Es stellt sich weiterhin heraus, dass eine vereinfachte Überlagerung der Last-Extremwerte zu einer deutlichen Überschätzung der Versagenswahrscheinlichkeit führt und somit als konservatives Modell zu bewerten ist.
Neue Konstruktionsentwicklungen erwarten von Bauingenieuren auch neue Berechnungs- und Analysenmethoden. Zu solchen Konstruktionen gehören Polystyrol-Massiv-Rippendecken. Die Decken, die eine wichtige Rolle im Neubau sowie in der Sanierung und Rekonstruktion von Altbauten spielen, haben eine umfangreiche Technologiebeschreibung, jedoch relativ kleine Berechnungsbase zur statischen Analyse der Ausnutzugs- und Statischfestigkeitsparametern. In den Vortrag wurde eine Methode zu Analyse solche Decken dargestellt. Das interessante Problem befindet sich in der sogennaten zweiten Phase, wenn der Decke keine elastische Platte ist. Eine wichtige Rolle bei Berechnung spielen die veränderte Steifigkeit und Rheology.
In der jüngeren Vergangenheit haben die Entwicklungen von neuen Programmen und der Rechentechnik zu radikalen Veränderungen in den Methoden der Berechnung von ingenieurtechnischen Bauten geführt. An erster Stelle sind hier die Matrizenmethoden für notwendige Berechnungen der Aufgaben anzuführen, welche eine kompakte und allgemeine Form der Aufschreibung von Gleichungen gestatten und geeignet für die Bearbeitung an Computern sind. Die elektronischen Maschinen wurden damit befähigt nicht nur Systeme linear-algebraischer Gleichungen mit hundert oder tausend von Unbekannten zu lösen, sonder auch die Bearbeitung von Differentialgleichungen, sowie die Formierung dieser Gleichungen zu übernehmen. Damit übernehmen die Computer den Grossteil des Prozesses der Berechnung und der Projektierung einer Konstruktion. Zweifellose Aktualität haben die Fragen über die Benutzung dieser Eigenschaften für die Aufgaben der Bauinformatik und Baumechanik. Diesen ist der vorliegende Artikel gewidmet. In der Praxis der Projektierung kommen oft komplexe Stabsysteme und zylindrische-gefaltete Flächensysteme vor. Dabei ist zu berücksichtigen: die Verschiebung in Stabsystemen, ihre elastischen Gründungen und die auftretenden längs- und querlaufenden Biegungen sowie harmonische Schwingungen. In diesem Artikel wird ein universeller Algorithmus zur Ausarbeitung von Matrizen für Härte- und Festigkeitsbetrachtungen für Stäbe vorgestellt. Der entwickelte Algorithmus erlaubt die Berechnung von komplizierten Stabsystemen, die in der Praxis weit verbreitet sind. Für die Ausarbeitung der Matrizen für die Festigkeitsbetrachtung wurde die symbolische Programmiersprache MAPLE benutzt. Weiterhin zeigt dieser Artikel die Berechnung von gefalteten Flächensystemen unter Verwendung des diskret- kontinuierlichen Modells von W. S. Wlasow, mit Hilfe eines universellen Algorithmus auf. Für die Aufstellung der Matrix für Festigkeitsbetrachtung werden als Systemeinstellungen die Schichtformierung und der Ausschluss nach Gauss vorgeschlagen. Am Ende des Artikels werden Beispiele für die Berechnung von komplizierten Konstruktion aufgeführt.
Bei der Tragwerksplanung sowohl für Massivkonstruktionen als auch für Stahlkonstruktionen werden zukünftig nichtlineare Berechnungsverfahren in größerem Umfang Anwendung finden, als das in der Vergangenheit üblich bzw. möglich war. Wichtige Impulse gehen dabei von der europäischen Normung aus. Bei der Anwendung von Berechnungsverfahren, die die Nichtlinearität des Materialverhaltens berücksichtigen und bei der Ermittlung der Tragsicherheit planmäßig ausnutzen, ist es notwendig, die Entwicklung plastischer Deformationen zu verfolgen und bei der Beurteilung des Grenzzustandes der Tragfähigkeit als Kriterium mit heranzuziehen. Im vorliegenden Beitrag werden mathematische Modelle für folgende Berechnungsaufgaben vorgestellt: Ermittlung der Schnittgrößen und Formänderungen in ebenen Stabtragwerken nach Theorie II. Ordnung unter Berücksichtigung der physikalischen Nichtlinearität und Ermittlung von Grenzlasten, die durch Spannungs- und Verformungskriterien definiert sind. Dabei zeigt sich, daß mathematische Modelle auf der Grundlage von Extremalprinzipien und unter Einbeziehung der mathematischen Optimierung effektiv und hinreichend universell formuliert werden können. Wie Beispielrechnungen zeigen, ist die Beurteilung der Tragfähigkeit unter Berücksichtigung von Deformationsbegrenzungen von entscheidender Bedeutung, um Fehleinschätzungen der Tragsicherheit zu vermeiden.
Rectangular steel frames are considered and subjected to strong ground motion. Their behavior factor is numerically evaluated using nonlinear time history analysis and different ground acceleration records. The behavior factor is determined assuming severe collapse mechanism occurs throughout the time history. The system of equations is transformed into single equation end then the energy balance concept is applied. The expression for the behavior factor is derived and its application to four story two bays steel frame is illustrated and the corresponding results are discussed.
A method of automatic maintenance of vibration amplitude of a number of mechanisms at given level, when exiting force amplitude is varied greatly is given. For this purpose a pendulum is attached to a mechanism through a viscoelastic hinge. Load of a pendulum can move along an arm and it is viscoelastic connected to it.
Datenaustausch, Daten resp. Produktdatenmodelle sind seit mehreren Jahren Themen in der Forschung. Verschiedene Forschungsprojekte und Initiativen diverser Firmen führten zu bereichsübergreifenden Ansätzen wie IFC und verschiedenen STEP-AP´s. Speziell im Stahlbau sind die Projekte >Produktschnittstelle Stahlbau< und >CIMsteel< entwickelt, weiterentwickelt und überarbeitet worden. Als Weiterentwicklung der bisher existierenden Austauschformate versuchen neuere Ansätze den Nutzen über die reine Datenübermittlung hinaus zu erweitern. So integrieren diese Lösungsvorschläge Aspekte der Kommunikation, der Zusammenarbeit und des Managements. Des weiteren übernehmen sie Aufgaben der Daten- und Modellverwaltung. Somit erfolgt eine digitale Abbildung unter Einbezug sämtlicher ermittelter Daten. Resultierend aus den besonderen Randbedingungen im Bauwesen, wird ein Bauwerksmodell aus untereinander in Beziehung gesetzten Domänenmodellen aufgebaut
Entwurfsprozesse im Bauwesen sind hochgradig kooperative Prozesse mit alternierenden Phasen asynchroner und synchroner Teamarbeit. Die Informationen über den aktuellen Entwurfsgegenstand können als Objektstrukturen modelliert werden, die in entsprechenden Modellverwaltungssystemen gespeichert werden. Bei der Realisierung von kooperativ nutzbaren Umgebungen für den Bauwerksentwurf sind jedoch bei der Auswahl von Basistechniken spezifische Anforderungen von CSCW-Applikationen zu beachten, die bestimmte traditionelle Verfahren nicht erfüllen. Neben verschiedenen Auswirkungen auf das Interaktionsverhalten der Entwurfsumgebung spielt die cooperation awareness der eingesetzten Mechanismen eine bedeutende Rolle. Mechanismen zur Zugriffskontrolle sind in netzwerkbasierten Mehrbenutzerumgebungen essentiell, jedoch sind herkömmliche Verfahren zu unflexibel und nicht hinreichend ausdrucksstark. Eine adaptierte und erweiterte Variante des Matrixverfahrens ist für die Anwendung in Modellverwaltungssystemen geeignet. Ebenso muss bei der Auswahl von Mechanismen zur Nebenläufigkeitskontrolle Augenmerk auf dessen Eignung in Groupware-Systemen gelegt werden. Bei der Unterstützung asynchroner Kooperation können Lock-Verfahren auf die Informationen in Modellverwaltungssystemen angewandt werden. Für die Applikationen für synchrone Teamarbeit müssen derartige Mechanismen auf die gemeinsamen Informationsbestände sowie auf Systemressourcen der Entwurfsumgebung angewendet werden. Hierfür sind floor-passing'-Verfahren geeignet; die Anwendbarkeit von Transformationsverfahren sollte für die konkret umzusetzende Applikation geprüft werden.
In this paper we revisit the so-called Bergman kernel method (BKM) for solving conformal mapping problems. This method is based on the reproducing property of the Bergman kernel function. The main drawback of this well known technique is that it involves an orthonormalization process and thus is numerically unstable. This difficulty can be, in some cases, overcome by using the Maple system, which makes no use of numeric quadrature. We illustrate this implementation by presenting a numerical example. The construction of reproducing kernel functions is not restricted to real dimension 2. Results concerning the construction of Bergman kernel functions in closed form for special domains in the framework of hypercomplex function theory suggest that BKM can also be extended to mapping problems in higher dimensions, particularly 3-dimensional cases. We describe such a generalized BKM-approach and present numerical examples obtained by the use of specially developed software packages for quaternions.
In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading.
The development of the qualitative methods of investigation of dynamic systems, suggested by the authors, is the effective means for identification of dynamic systems. The results of the extensive investigations of the behaviour of linear dynamic systems and symmetrical system with double well potential under polyharmonic excitation are given in the paper. Phase space of dynamic systems is multi-dimensional. Each point of this space is characterized by not less than four co-ordinates. In particular: displacement, velocity, acceleration and time. Real space has three dimensions. It is more convenient for the analysis. We consider the phase space as limited to three dimensions, namely displacement, velocity and acceleration. Another choice of parameters of phase planes is also possible [1, 2]. Phase trajectory on a plane is of the greatest interest. It is known that accelerations of points are more sensitive to deviations of oscillations from harmonic ones. It is connected with the fact that power criteria on it are interpreted most evidently. Besides, dependence is back symmetric relative to axis of the diagram of elastic characteristic. Only the phase trajectories allow establishing a type and a level of non-linearity of a system. The results of the extensive investigations of the dynamic systems behaviour under polyharmonic excitation are given in the paper. The use of the given phase trajectories enables us to determine with a high degree of reliability the following peculiarities: - presence or absence of non-linear character of behaviour of a dynamic system; - type of non-linearity; - type of dynamic process (oscillations of the basic tone, combinative oscillations, chaotic oscillations.). Unlike existing asymptotic and stochastic methods of identification of dynamic systems, the use of the suggested technique is not connected with the use of a significant amount of computing procedures, and also it has a number of advantages at the investigation of complicated oscillations.
A fuzzy logic controller - WNC (Water Network Control) was developed for control of urban drainage systems. The objectives are to avoid accidents, flooding, pollutions through combined sewer overflows and excessive operation and maintenance costs. Fuzzy logic was proved to be a promising approach, flexible and easy accepted, because it includes the expert knowledge. Fuzzy control system proposed is robust and also easy to understand and modified. It offers to the operator the possibility to participate directly in the system control, combining the results of the modern optimization techniques with the experience and knowledge accumulated in time by experts. Thus, the control of urban sewer system can be well solved by implementing an intelligent control system, based on available information (fuzzy) and on expert's experience. An important feature of this fuzzy logic system is its capability to elaborate a control decision even in situations that were not considered in the design phase of the urban network.
All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper.
Die Einführung von neuen Informations- und Kommunikationstechniken in Klein- und Mittelständische Unternehmen (hier: kleine und mittlere Planungsbüros im Bauwesen) ist mit speziellen Problemen behaftet. Erfahrungswerte liegen nur in größeren und zumeist fachfremden Firmen vor. Neben den eigentlichen Sicherheitsrisiken (Thematik Internet), Verständnisschwierigkeiten und daraus resultierenden Akzeptanzproblemen fehlt beim Einsatz dieser neuen Techniken die Verbindung zum Ablauf in projektbasiert arbeitenden Unternehmen. Der Begeisterung und Euphorie durch den Einsatz neuer Technik stehen Änderungen des eigenen Arbeitsstiles und ein anfänglicher Mehraufwand entgegen. Ein Schwerpunktthema der eigenen Forschungsarbeiten sind die Ermittlung und Validierung von Kriterien für die Einführung neuer IuK-Techniken speziell in kleineren und mittleren Planungsbüros. In einer fortschreitenden Reihe von Arbeiten am Fachbereich wurden und werden nacheinander die genannten Problematiken und Aspekte in Angriff genommen. Dabei werden neben der Kategorisierung von Anwendungsszenarien und Vorstellung der einzelnen, empfehlenswerten Techniken einzelne Konzepte am Fachbereich und in Zusammenarbeit mit Ingenieurbüros überprüft. Der Beitrag möchte in Ergänzung zu bereits gelaufenen Arbeiten als Empfehlung oder Leitfaden für Planungsbüros auf die Machbarkeit neuer Techniken und einige nötige Randbedingungen eingehen.
Moderne Bemessungskonzepte für seismisch beanspruchte Hochbauten, wie die Methode der Kapazitäts-bemessung, planen inelastisches Verhalten einzelner Bereiche der Konstruktion beim Entwurf bewußt ein, um so einen Teil der durch das Beben eingetragenen Energie als inelastische Formänderungsarbeit zu absorbieren. Wird bei Akzeptanz inelastischen Verhaltens eine bestimmte Belastungsintensität, die als adaptive Grenzlast oder Einspiellast bezeichnet wird, überschritten, kann es infolge zyklischer Einwirkungen zu einer unbe-grenzten Akkumulation inelastischer Deformationen kommen. Die adaptive Grenzlast stellt damit für zyklische Einwirkungen eine geeignete Kenngröße zur Bewertung der Tragwerksqualität dar, bei der neben der Sicherung des Gleichgewichts ein bestimmtes Schädigungsniveau nicht überschritten wird. Im vorliegenden Beitrag werden die Grundzüge eines Bemessungs- und Nachweiskonzeptes für seismisch beanspruchte Stahlbetontragwerke, das unter Einbeziehung der Grundprinzipe der Kapazitätsbemessung von einem einheitlichen Kriterium zur Beschreibung des Grenzzustandes der Tragfähigkeit auf der Basis der adaptive Grenzlast ausgeht, vorgestellt. Dabei ist die Abschätzung der Verformungen notwendiger Bestandteil des Nachweis- bzw. Bemessungskonzeptes. Bei Druckgliedern ist die Berücksichtigung des Einflusses der Verformungen notwendiger Bestandteil des Bemessungskonzeptes. Entsprechende Erweiterungen der Berechnungsmodelle zur Berücksichtigung des Einflusses geometrisch nichtlinearer Effekte im Sinne einer Theorie II. Ordnung werden vorgestellt.
In den zurückliegenden Jahren wurden an der Professur Massivbau I umfangreiche Untersuchungen zur Modellbildung und rechnerischen Erfassung des Tragverhaltens von Tragwerken und Tragwerkselementen aus Stahlbeton und Spannbeton unter Berücksichtigung von Rißbildungen und Plastizierungen durchgeführt. Diesen Untersuchungen liegt als einheitliches methodisches Konzept der mathematischen Problembeschreibung und Problemlösung die mathematische Optimierung zugrunde. Bereits anläßlich des IKM 1994 [1] hatte der Verfasser Gelegenheit, zusammenfassend über Ergebnisse bei der Anwendung der mathematischen Optimierung im Bereich der nichtlinearen Tragwerksanalyse zu berichten. Der vorliegende Beitrag, soll einen Überblick über seitdem untersuchte Problemkreise und dabei gewonnene Ergebnisse und Erfahrungen vermitteln. Bei der Anwendung der linearen und quadratischen Optimierung sind wegen der geforderten Linearität der Nebenbedingungen Vereinfachungen bei der Modellbildung des stahlbetonspezifischen Tragverhaltens unumgänglich. Besonders betroffen sind die Ansätze zur Beschreibungen des Materialverhaltens. Durch den Einsatz allgemeiner nichtlinearer mathematischer Optimierungsmethoden lässt sich eine methodisch bedingte Linearisierung des Berechnungsmodells umgehen....
Die technische Entwicklung, insbesondere auf dem Gebiet der Digitaltechnik eröffnet heute neue und sehr weitreichende Möglichkeiten für die Automatisierung in Zweck- und Wohnbauten. Die zur Verfügung stehenden technischen Komponenten (intelligente Sensoren und Aktoren sowie ein hausinternes Netz für die Datenübertragung -Feldbus-) unterscheiden sich für diese Einsatzfälle kaum. Die Zielstellungen sind jedoch gänzlich andere. Intelligenz im Wohnbau bedeutet vor allem intelligente Alltagsbewältigung (z.B. Zeiteinsparung), Komfort und Wohlbefinden. Daß im Heimbereich nichtfunktionale Faktoren (Human Interface, Ästhetik, Preis, Attraktivität) eine große Rolle spielen, ist in das Problembewußtsein der Gerätehersteller und Käufer getreten. Im Bereich der Heimautomatisierung werden zunehmend moderne, die Möglichkeiten der konventioellen Steuerungs- und Regelungstechnik ergänzende Technologien wie Fuzzy- Steuerungen zur Optimierung der internen Arbeitsweise von Geräten eingesetzt. Die informatorische Vernetzung im Wohnbau unterstützt darüberhinaus wichtige Anliegen des Gebäudemanagements (energetische, ergonomische und ökologische Betrachtungen der Gebäudenutzung unter wirtschaftlichen Gesichtspunkten).
Petri-Netze und deren Erweiterungen stellen ein leistungsfähiges Instrument zur Model-lierung, Simulation und Animation von Systemen bzw. Prozessen dar. Mathematische Methoden die sowohl analytisch beschreibbar als auch graphisch darstellbar sind, wie z. B. Warteschlangenprobleme, Netzpläne, Suche optimaler Wege in Netzen bzw. Dynamische Optimierung, können mit Hilfe von Petri-Netzen modelliert werden. Werden Petri-Netze zur graphischen Darstellung gewählt, so können die Stellen (passive Knoten) mit Markenverweilzeiten sowie die Transitionen (aktive Knoten) mit Schaltzeiten belegt werden. Für die Zeiten sind deterministische bzw. stochastische Größen einsetzbar. Wird dem Gesamtnetz eine zentrale Uhr und den einzelnen zeitbehafteten Knoten jeweils eine lokale Uhr zugeordnet, so lassen sich die Prozeßabläufe mittels Animation sichtbar machen. Ein an der Professur Computergestützte Techniken entwickeltes Programmsystem dient zur Demonstration der einzelnen Probleme. In anschaulicher Weise kann damit das Ver-ständnis für die genannten Methoden sowie die mit ihrer Hilfe dargestellten Prozesse erleichtert werden.
The steel structure design codes require to check up the member strength when evaluating plastic deformations. The model of perfectly plastic material is accepted. The strength criteria for simple cross-sections (I section, etc.) of steel members are given in design codes. The analytical strength criteria for steel cross-sections and numerical approaches based on stepwise procedure are investigated in many articles. Another way for checking the carrying capacity of cross-sections is the use of methods that are applied for defining strain-deformed state of elastic perfectly plastic systems. In this paper non-iterative methods are suggested for checking strength of cross-sections. Carrying capacity of cross section is verified according to extremum principle of plastic fail under monotonically loading and the strain-deformed state of cross-section is defined according to extremum energy principals of elastic potential of residual stresses and complementary work of residual displacements. The mathematical expressions of these principals for discrete cross-section are formulated as problems of convex mathematical programming. The cross-section of steel member using finite element method is divided into free form plane elements. The constant distribution of stresses along the finite element is accepted. The relationships of finite elements for static formulation of the problem are formed so, that kinematics formulation relationships could be obtained in a formal way using the theory of duality. Numerical examples of determination of cross-section strength, composition of interactive curves and composition of moment-curvature curves for different axial force levels are presented.
The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes.
The general motivation of this research is to develop software to support the handling of the increased complexity of architectural design. In this paper we describe a system providing general support during the whole process. Instead of only developing design tools we are also addressing the problem of the operating environment of these tools. We conclude that design tools have to be integrated in an open, modular, distributed, user friendly and efficient environment. Two major fields have to be addressed - the development of design tools and the realisation of an integrated system as their operation environment. We will briefly focus on the latter by discussing known technologies in the field of information technology and other design disciplines that can be used to realise such an environment. Regarding the first subject we have to state the need of a detailed tool specification. As a solution we suggest a strategy where the tool functions are specified on the basis of a transformation, where a hierarchical process model is mapped into specifications of different design tools realising appropriate support for all sub-processes of architectural design. Using this strategy the main steps to develop such a support system are: implementation of a framework as basis for the integrated design system decision whether the tool specification are already implemented in available tools in this case these tools can be integrated using known methods for tool coupling otherwise new design tools have to be developed according to the framework
This paper describes a research project that addresses the difficulties in dealing with regulatory documents such as national and regional codes. These documents tend to be voluminous, heavily cross-referenced, possibly ambiguous and even conflicting at times. There are often multiple documents that need to be consulted and satisfied; however it is a difficult task to locate all of the relevant provisions. In addition, sections dealing with the same or similar conceptual ideas sometimes lay down conflicting requirements. We propose a framework for regulation representation, analysis and comparison with emphasis on the extraction of similarities between provisions. We focus on accessibility regulations, whose intent is to provide the same or equivalent access to a building and its facilities for disabled persons. An XML regulatory repository is developed to extract structural as well as non-structural features from government regulations to help user understanding and computational analysis. A similarity analysis is performed between different sources of regulations. In order to achieve a better comparison between provisions, we employ a combination of feature matching and structural analysis. Results are shown on comparisons between American and European codes, as well as on the domain of electronic-rulemaking.
This paper examines the impact of information technology (IT) utilization on construction firm performance. Based on empirical data collected from 74 US construction firms, the analyses provide evidence that IT has a positive impact on overall firm performance, schedule performance, and cost performance. Firm performance is a composite score of several metrics of performance: schedule performance, cost performance, customer satisfaction, safety performance, and profit. No relationship is found between IT utilization and customer satisfaction, safety, or profit, although this may be due to limitations of the study given strong correlations between IT utilization and cost and schedule performnance. The empirical evidence of positive association between performance and IT use provided by this research is significant to both construction practice and research literature. This evidence should encourage firms to adopt and invest in IT tools.
There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management.