Refine
Has Fulltext
- yes (830) (remove)
Document Type
- Article (830) (remove)
Institute
- Professur Theorie und Geschichte der modernen Architektur (393)
- Professur Informatik im Bauwesen (130)
- Institut für Strukturmechanik (ISM) (72)
- Professur Bauphysik (23)
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (21)
- Professur Informatik in der Architektur (15)
- Institut für Europäische Urbanistik (11)
- Professur Bauchemie und Polymere Werkstoffe (11)
- Junior-Professur Computational Architecture (10)
- Materialforschungs- und -prüfanstalt an der Bauhaus-Universität (10)
Keywords
- Bauhaus-Kolloquium (395)
- Weimar (395)
- Architektur (167)
- 1986 (63)
- 1989 (60)
- Design (59)
- Bauhaus (55)
- Raum (55)
- Digitalisierung (52)
- 1996 (51)
- 1983 (49)
- 2007 (49)
- Bild (49)
- 2003 (46)
- 1992 (39)
- Architekturtheorie (37)
- 1979 (36)
- Maschinelles Lernen (29)
- Finite-Elemente-Methode (27)
- OA-Publikationsfonds2020 (27)
- OA-Publikationsfonds2022 (23)
- Simulation (23)
- Stadtplanung (23)
- Bautechnik (22)
- Wohnungsbau (22)
- Produktmodell (21)
- Technologie (21)
- CAD (20)
- Modellierung (20)
- Deutschland <DDR> (19)
- Städtebau (18)
- Fortschritt (17)
- Lernendes System (15)
- Machine learning (15)
- Kongress (14)
- Macht (14)
- Mehragentensystem (14)
- OA-Publikationsfonds2023 (14)
- Virtuelle Realität (14)
- Fiktion (13)
- Physikalisches Verfahren (11)
- Stadt (11)
- Bauwerk (10)
- Gropius (10)
- Neue Medien (10)
- Stadtentwicklung (10)
- Walter (10)
- Großtafelbau (9)
- OA-Publikationsfonds2021 (9)
- Raumklima (9)
- Industriedesign (8)
- Ludwig (8)
- Mies van der Rohe (8)
- Moderne (8)
- OA-Publikationsfonds2018 (8)
- Optimierung (8)
- machine learning (8)
- Building Information Modeling (7)
- Deutschland <Bundesrepublik> (7)
- Erdbeben (7)
- Deep learning (6)
- Forschungskooperation (6)
- Industriebau (6)
- Journalismus (6)
- Medien (6)
- Moholy-Nagy (6)
- Neues Bauen (6)
- OA-Publikationsfonds2019 (6)
- Technik (6)
- big data (6)
- Bauentwurf (5)
- Beton (5)
- Brücke (5)
- Dynamische Belastung (5)
- Fuzzy-Logik (5)
- Geoinformationssystem (5)
- László (5)
- Rezeption (5)
- Stahlbau (5)
- Verkehrsplanung (5)
- Wasserglas (5)
- Weimar / Bauhaus (5)
- Wärmeleitfähigkeit (5)
- computational fluid dynamics (5)
- Ästhetik (5)
- Alkalisilikat (4)
- Arbeitsplatzgestaltung (4)
- Baukonstruktion (4)
- Bauwesen (4)
- Bindemittel (4)
- Bruchmechanik (4)
- Computational Design (4)
- Denkmalpflege (4)
- Dessau / Bauhaus (4)
- Dreidimensionales Modell (4)
- Europa (4)
- Film (4)
- Framework <Informatik> (4)
- Hannes <Architekt> (4)
- Impedanzspektroskopie (4)
- Kunst (4)
- Künstliche Intelligenz (4)
- May (4)
- Meyer (4)
- Neuronales Netz (4)
- Produktivkraft (4)
- Silikat (4)
- Sowjetunion (4)
- Strömungsmechanik (4)
- Visualisierung (4)
- Wissensmanagement (4)
- Wohnen (4)
- artificial intelligence (4)
- rapid visual screening (4)
- API (3)
- Angewandte Mathematik (3)
- Anwendung (3)
- Baubetriebslehre (3)
- Bauindustrie (3)
- Bauschaden (3)
- Baustelle (3)
- Bauzeichnung (3)
- Behaglichkeit (3)
- Berlin <West> (3)
- Bildanalyse (3)
- Boden (3)
- Bridge (3)
- Computerunterstütztes Verfahren (3)
- Damm (3)
- Datenmodell (3)
- Denkmal (3)
- Entrepreneurship (3)
- Ernst <Architekt> (3)
- Facility-Management (3)
- Faschismus (3)
- Fehlerabschätzung (3)
- Funktionalismus <Architektur> (3)
- Gebäude (3)
- Geopolymere (3)
- Graphentheorie (3)
- Informationstechnik (3)
- Ingenieurbau (3)
- Inspektion (3)
- Le Corbusier (3)
- Lebenszyklus (3)
- Living wall (3)
- Mikroklima (3)
- Moskau / WCHUTEIN (3)
- Nachhaltigkeit (3)
- Nationalsozialismus (3)
- OA-Publikationsfonds2017 (3)
- Online-Medien (3)
- Polymere (3)
- Schaden (3)
- Silicate (3)
- Soziale Bewegung (3)
- Sozialer Wohnungsbau (3)
- Stadtforschung (3)
- Strukturanalyse (3)
- Temperatur (3)
- Tragwerk (3)
- Träger (3)
- Tschechische Republik (3)
- Utopie (3)
- Wohnungspolitik (3)
- Zukunft (3)
- artificial neural networks (3)
- damaged buildings (3)
- earthquake safety assessment (3)
- random forest (3)
- schlieren imaging (3)
- support vector machine (3)
- thermal comfort (3)
- 1834-1896> (2)
- 1976 (2)
- Abwasser (2)
- Abwasserreinigung (2)
- Aerodynamik (2)
- Aggregation (2)
- Algorithmus (2)
- Alkalisilicate (2)
- Alumosilikat (2)
- Arbeitshygiene (2)
- Architekturkritik (2)
- Architekturstudium (2)
- BIM (2)
- Balkanroute (2)
- Balken (2)
- Baubetrieb (2)
- Bauplanung (2)
- Baustahl (2)
- Baustatik (2)
- Belüftung (2)
- Benutzer (2)
- Berlin (2)
- Berührungslose Messung (2)
- Bildsegmentierung (2)
- Bildverarbeitung (2)
- Biodiesel (2)
- Biopolitik (2)
- Boden-Bauwerk-Wechselwirkung (2)
- Bodenmechanik (2)
- Brückenbau (2)
- CGI <Computergraphik> (2)
- Coating (2)
- Computational Urban Design (2)
- Computerspiel (2)
- Controlling (2)
- Datenaustausch (2)
- Datenbank (2)
- Delphin (2)
- Dialogsystem (2)
- ENVI-Met (2)
- Ehrendoktorwürde (2)
- Eis (2)
- Elastizität (2)
- Elastoplastizität (2)
- Energiebedarf (2)
- Entscheidungsunterstützung (2)
- Entscheidungsunterstützungssystem (2)
- Europäische Union (2)
- Fahrleitung (2)
- Festkörpermechanik (2)
- Feuchteleitung (2)
- Fluid (2)
- Flüchtlingspolitik (2)
- Forschung (2)
- Fotokatalyse (2)
- Fotovoltaik (2)
- Freie Schwingung (2)
- Gebäudehülle (2)
- Gebäudesimulation (2)
- Georg (2)
- Geschichtetes Medium (2)
- Gesellschaft (2)
- Gestaltungslehre (2)
- Gewalt (2)
- Grundrissgenerierung (2)
- Grundwasser (2)
- Hans (2)
- Heat transport (2)
- IFC-basierte Gebäudesimulation (2)
- Industrialisiertes Bauen (2)
- Industrialisierung (2)
- Ingenieurwissenschaften (2)
- Innenstadt (2)
- Inspection (2)
- Instandhaltung (2)
- Intelligente Stadt (2)
- Internet (2)
- Internet of things (2)
- Italien (2)
- Ito (2)
- Itten (2)
- Johannes (2)
- Journalistik (2)
- Katastrophenmanagement (2)
- Klimaänderung (2)
- Kommunistische Partei Deutschlands (2)
- Koolhaas (2)
- Kosten-Nutzen-Analyse (2)
- Kritik (2)
- Kritikbegriff (2)
- Kultur (2)
- Kulturerbe (2)
- Kunsterziehung (2)
- Kunstschule (2)
- Künste (2)
- Langzeitverhalten (2)
- Laser (2)
- Lehrtätigkeit (2)
- Machine Learning (2)
- Maschinelles Sehen (2)
- Massendaten (2)
- Mathematische Modellierung (2)
- Mathematisches Modell (2)
- Measurements (2)
- Medienwissenschaft (2)
- Messung (2)
- Metapher (2)
- Metropole (2)
- Modernisierung <Bauwesen> (2)
- Moisture transport (2)
- Monitoring (2)
- Morris (2)
- Moskau (2)
- Moskau / WChUTEIN (2)
- Muche (2)
- Multikriterielle Optimierung (2)
- Museumsführer (2)
- Nachrichtensendung (2)
- Neoliberalismus (2)
- Neuklassizismus (2)
- Otto (2)
- Planung (2)
- Planungstheorie (2)
- Plastizität (2)
- Polieren (2)
- Politik (2)
- Postmoderne (2)
- Postwachstumsstadt (2)
- Preßburg (2)
- Quantitative Sozialforschung (2)
- Quarzglas (2)
- Rasterelektronenmikroskopie (2)
- Raumwahrnehmung (2)
- Regionalentwicklung (2)
- Reifungsprozess (2)
- Rem (2)
- Rissausbreitung (2)
- Rissbildung (2)
- Rom (2)
- Schnittstelle (2)
- Schwingung (2)
- Schwingungsdämpfung (2)
- Sensitivitätsanalyse (2)
- Skelettbau (2)
- Slowakei (2)
- Smartphone (2)
- Sozialdemokratische Partei Deutschlands (2)
- Sozialismus (2)
- Soziologie (2)
- Spitzentechnologie (2)
- Sprache (2)
- Stabilität (2)
- Stadtgestaltung (2)
- Stahl (2)
- Stahlbeton (2)
- Stahlkonstruktion (2)
- Standardisierung (2)
- Straßenbau (2)
- Structural Health Monitoring (2)
- Strukturbildungsprozess (2)
- Strukturmechanik (2)
- Strömungsgeschwindigkeit (2)
- Studium (2)
- Theater (2)
- Toyoo (2)
- Tragfähigkeit (2)
- Training (2)
- Transfer learning (2)
- Transformation (2)
- UNESCO (2)
- Ungewissheit (2)
- Utopische Architektur (2)
- Verflüssigung (2)
- Verkehrssicherheit (2)
- Vulnerability assessment (2)
- Wassergehalt (2)
- Waterglass (2)
- Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren (2)
- William <Künstler (2)
- Wirtschaft (2)
- Wissensverarbeitung (2)
- Wohnumfeld (2)
- Wohungsbau (2)
- Wärmeübertragung (2)
- Zementklinker (2)
- building simulation (2)
- buildings (2)
- coupling (2)
- crowdsourcing (2)
- damping aggregate (2)
- data science (2)
- ductless personalized ventilation (2)
- earthquake (2)
- elementary interaction (2)
- extreme learning machine (2)
- heat transfer coefficient (2)
- indoor air quality (2)
- industrial heritage (2)
- mathematical modeling (2)
- metaconcrete (2)
- personalized ventilation (2)
- photocatalysis (2)
- platform (2)
- residential buildings (2)
- set of objectives (2)
- smart cities (2)
- soft computing techniques (2)
- thermische Gebäudehülle (2)
- urban morphology (2)
- variational principle (2)
- vibration absorber (2)
- virtual construction site (2)
- vulnerability assessment (2)
- wireless sensor networks (2)
- Öffentlicher Personennahverkehr (2)
- 1968 (1)
- 20.00 (1)
- 3D Surface Models (1)
- 3D printing (1)
- 3D reinforced concrete buildings (1)
- 3D-Druck (1)
- 3D-Printing (1)
- 4D Modeling (1)
- 54.73 (1)
- 86.28 (1)
- AIEd (1)
- ANN modeling (1)
- Abfallwirtschaft (1)
- Ablaufplanung (1)
- Abonnement (1)
- Abwassermanagement (1)
- Abwassertechnologie (1)
- Abwasserwirtschaft (1)
- Activation function (1)
- Ad-hoc-Netz (1)
- Adaptive Pushover (1)
- Aeroelastizität (1)
- Affecting factors; Measurement uncertainty; Materials testing; Quantitative comparison; Strain comparison; Tensile test (1)
- Affective Processing (1)
- Aggregationsprozess (1)
- Agonismus (1)
- Air tightness (1)
- Aktionsraumforschung (1)
- Akustik (1)
- Akustische Laufzeit-Tomographie (1)
- Aleksandr A. (1)
- Alkalisilikatsol (1)
- Alkalislikat (1)
- Allgemeinheit (1)
- Alltagskritik (1)
- Altbaumodernisierung (1)
- Altenheim (1)
- Alter (1)
- Aluminosilicate (1)
- Amplifikationsprozesse (1)
- Andrea (1)
- Angewandte Informatik (1)
- Anthropologie (1)
- Anthropozän (1)
- Antibiotikum (1)
- Antidiskriminierung (1)
- Antike (1)
- Arbeitskultur (1)
- Arbeitsplatz (1)
- Arbeitsschutz (1)
- Arc-direct energy deposition (1)
- Architecture (1)
- Architecture Pollution (1)
- Architekt (1)
- Architektur <Motiv> (1)
- Architekturphotographie (1)
- Architekturzeichnung (1)
- Arendt (1)
- Artificial Intelligence (1)
- Artificial neural network (1)
- Assistive robot (1)
- Association for Computing Machinery / Special Interest Group on Graphics (1)
- Atlantropa (1)
- Aufsatz (1)
- Augmented Reality (1)
- Augmented reality (1)
- Augmented studio (1)
- Ausbildungsstätte (1)
- Ausfachung (1)
- Ausschreibung (1)
- Autobahn (1)
- Automation (1)
- Automatisierung (1)
- Auxiliary lane; Conflict Indexes; Road safety; Traffic Conflict Technique; U-turn (1)
- Avantgarde (1)
- Axial fan (1)
- Axialspannung (1)
- BIM, BIM Adoption, BIM Advantages , Construction Industry, Pakistan (1)
- BIM; Building Information Modeling; site management; construction site. (1)
- Background-oriented schlieren (1)
- Balkan (1)
- Bandmatrix (1)
- Batterie (1)
- Bauakustik (1)
- Bauaufnahme (1)
- Bauausführung (1)
- Baubionik (1)
- Bauhaus-Universität Weimar (1)
- Bauhaus.MobilityLab (1)
- Bauinformatik (1)
- Bauklimatik (1)
- Baumaschinen (1)
- Bauornament (1)
- Bauphysik (1)
- Baustelleneinrichtung (1)
- Bauteil (1)
- Bauwerksplanung (1)
- Bauwirtschaft (1)
- Bauzustand (1)
- Bayes-Verfahren (1)
- Bayesian inference (1)
- Bayesian parameter update (1)
- Beam-to-column connection; semi-rigid; flush end-plate connection; moment-rotation curve (1)
- Bedarfsforschung (1)
- Belastung (1)
- Belgrad (1)
- Beltrami-Gleichung (1)
- Bentonit (1)
- Benutzung (1)
- Bergbau (1)
- Berlin / Bauhaus (1)
- Bernard (1)
- Beschichtung (1)
- Beschleunigungsstreifen (1)
- Beschränkung (1)
- Bewertung (1)
- Bibliotheken (1)
- Biegefestigkeit (1)
- Bilderkennung (1)
- Biofeedback (1)
- Biogasanlage (1)
- Biomasse (1)
- Bismarck (1)
- Black Mountain <NC> / Black Mountain College (1)
- Blasinstrument (1)
- Blumenberg, Hans (1)
- Bodenfeuchte (1)
- Bodengestaltung (1)
- Bodentemperatur (1)
- Bolzen (1)
- Bonding Methods (1)
- Boris V. (1)
- Bornitrid (1)
- Brandschutz (1)
- Brasilia (1)
- Brasilien (1)
- Brazil; collective; residences; families; neighbourhoods; new middle class; private; self-production; space; urban (1)
- Breslau / Staatliche Akademie für Kunst und Kunstgewerbe (1)
- Bretton-Woods-System (1)
- Brünn (1)
- Brünn / Haus Tugendhat (1)
- Brüssel / Philips-Pavillon (1)
- Bubble column reactor (1)
- Buchgestaltung (1)
- Building monitoring (1)
- Building safety assessment (1)
- CAD 3D <Programm> (1)
- CFD (1)
- Cable-driven parallel robots (1)
- Cable-stayed bridges; wind engineering; wind tunnel testing; construction (1)
- Cambridge <Mass.> (1)
- Camera Tracking (1)
- Care home (1)
- Catenary poles (1)
- Celebration <Fla.> (1)
- Cellular automata (1)
- Charles <Wales (1)
- ChatGPT (1)
- Chatbot (1)
- Chicago <Ill.> / Illinois Institute ot Technology (1)
- Chirurgie (1)
- Collocation method (1)
- Comic (1)
- Commercialization; Comprehencive; Memorlization; Renovation; Socialization (1)
- Computational modeling (1)
- Computational urban design (1)
- Computational urban planning (1)
- Computer Supported Cooperative Work (1)
- Computer graphics (1)
- Computer vision (1)
- Computergraphik (1)
- Computersimulation (1)
- Computertomographie (1)
- Computerunterstütztes Lernen (1)
- Concept of Living (1)
- Construction Sequence (1)
- ContikiMAC (1)
- Convective indoor air flow (1)
- Coupled-Eulerian–Lagrangian (1)
- Covid-19 (1)
- Cross-correlation (1)
- Culture of Media (1)
- DLVO-Theorie (1)
- Damage (1)
- Damage Information Modeling (1)
- Damage Segmentation (1)
- Damage accumulation (1)
- Dammbau (1)
- Datenbanksystem (1)
- Datenbankverwaltung (1)
- Datensammlung (1)
- Datenverarbeitung (1)
- Debatte (1)
- Deep Learning (1)
- Defekt (1)
- Deformationsverhalten (1)
- Degrowth (1)
- Dekonstruktion (1)
- Dementia (1)
- Demokratie (1)
- Design Spectra (1)
- Design-simulation-loop (1)
- Deutschland (1)
- Deutschland <Östliche Länder> (1)
- Dichte Packung (1)
- Dielectric materials (1)
- Dielectric spectroscopy (1)
- Dielektrische Spektroskopie (1)
- Diener (1)
- Diffusionswärme (1)
- Digital image correlation (1)
- Digitaljournalismus (1)
- Dirac-Operator (1)
- Diskrete Optimierung (1)
- Diskrimierung (1)
- Diskurs (1)
- Distributed computing (1)
- Dokument (1)
- Domain Adaptation (1)
- Domed Cities (1)
- Dresden (1)
- Druckfestigkeit (1)
- Druckluft (1)
- Dual phase steel (1)
- Dual-support (1)
- Dynamic Taxonomy Composition, Keyquery, Classification Systems, Reverted Index, Big Data Problem (1)
- EDX (1)
- ELM (1)
- ENVI-met (1)
- EXPRESS <Programmiersprache> (1)
- Earthquake (1)
- Edelstahl (1)
- Egypt (1)
- Eigenheim (1)
- Eigenwert (1)
- Elastizitätstheorie (1)
- Elastomer (1)
- Electromagnetic properties of porous materials (1)
- Elektrostatische Welle (1)
- Embankment, sensitivity analysis, parameter identification, Particle Swarm Optimization (1)
- Emotion (1)
- Empfindlichkeit (1)
- Empire XPU 8.01 (1)
- Ender (1)
- Energieeffizienz (1)
- Energieplanung (1)
- Energiespeicherung (1)
- Energieverbrauch (1)
- Energiewende (1)
- Entscheidung bei mehrfacher Zielsetzung (1)
- Entwicklungsländer (1)
- Epoxide (1)
- Epoxidharz (1)
- Erbe (1)
- Erbeben (1)
- Erdbebensicherheit (1)
- Erfurt (1)
- Erlebnis (1)
- Erneuerbare Energien (1)
- Ernst <Architektur> (1)
- Erweiterte Realität (1)
- Erweiterte Realität <Informatik> (1)
- Erwin (1)
- Ethik (1)
- Eurocode (1)
- Evolutions-Strategie (1)
- Evolutionäre Algorithmen (1)
- Experimentalplattform (1)
- Expo <2000> (1)
- Extreme value distribution (1)
- Fachwerkbau (1)
- Fagus-Werk Karl Benscheidt (1)
- Fahrleitungsmast (1)
- Fahrradergometer (1)
- Fakultät (1)
- Farbgestaltung (1)
- Fatigue life (1)
- Feminismus (1)
- Ferdinand <Architekt> (1)
- Fernerkung (1)
- Fernsehproduktion (1)
- Fertigbau (1)
- Festphasen-Fermentation (1)
- Feststoff (1)
- Fiction (1)
- Filmarchitektur (1)
- Finite element methods (1)
- Finnland (1)
- Fire resistance; Parameter optimization; Sensitivity analysis; Thermal properties (1)
- First Order Reliability Method (1)
- Flow visualization (1)
- Flächengerechtigkeit (1)
- Flächenverbrauch (1)
- Flüchtling (1)
- Fordismus (1)
- Forecasting (1)
- Forschungsprozess (1)
- Fraktal (1)
- Frankfurt <Main> (1)
- Frankfurt am Main (1)
- Frankreich (1)
- Frau (1)
- Freac (1)
- Freac. (1)
- Freiraum (1)
- Freiträgerkapazität (1)
- Frequency (1)
- Fritz (1)
- Frost (1)
- Frostangriff (1)
- Frosterus (1)
- Frühsozialismus (1)
- Funktechnik (1)
- Funktioneller Gradientenwerkstoff (1)
- Funktionentheorie (1)
- Funtionalismus <Architektur> (1)
- Fussgänger (1)
- Fuzzy Logic (1)
- Fuzzy-Regelung (1)
- GIS (1)
- Game Engine (1)
- Gartenkunst (1)
- Gaussian process regression (1)
- Gebäudeleittechnik (1)
- Gedächtnis (1)
- Gefühl (1)
- Gegenwissen (1)
- Gegenwissenschaft (1)
- Gel (1)
- Gelbildung (1)
- Generative Entwurfsmethoden (1)
- Genetischer Algorithmus (1)
- Gentrification (1)
- Gentrifizierung (1)
- Geo-Statistical Analysis (1)
- Geochemical modeling; Soils; High-pressure behavior; bentonite; clays; expansive clays (1)
- Geografie (1)
- Geoinformatik (1)
- Geometrie (1)
- Geopolymer (1)
- Georg Vintz (1)
- Gerechtigkeit (1)
- Gesang (1)
- Geschichte (1)
- Geschäftsmodell (1)
- Gesicht (1)
- Gesundheit (1)
- Gesundheitsinformationssystem (1)
- Gesundheitswesen (1)
- Gewaltprävention (1)
- Gewinde (1)
- Giedion (1)
- Gips (1)
- Gittererzeugung (1)
- Gleichgewicht (1)
- Globe thermometers (1)
- Godber (1)
- Google (1)
- Gottfried (1)
- Grafik (1)
- Graph (1)
- Graphen (1)
- Graphene (1)
- Grauwasser (1)
- Green facade (1)
- Green-Funktion (1)
- Grenzregime (1)
- Grenzzustand (1)
- Griechenland (1)
- Grundlage (1)
- Grundstück (1)
- Grundstücksumlegung (1)
- Größenverhältnis (1)
- Gründung (1)
- Gustav (1)
- Göteborg (1)
- Haesler (1)
- Hahs (1)
- Halbraum (1)
- Haller (1)
- Hamburg (1)
- Hannah (1)
- Henselmann (1)
- Hermann <Architekt> (1)
- Herrschaftskritik (1)
- Herzog und de Meuron (1)
- Heuristik (1)
- High-Tech <Kunst> (1)
- High-speed electric train (1)
- Highway (1)
- Hilberseimer (1)
- Himalaja (1)
- Himalaya (1)
- Hinnerk (1)
- History (1)
- Hochfester Beton (1)
- Hochhaus (1)
- Hochschulbildung (1)
- Hochwasser (1)
- Hochwasserschadensmodell (1)
- Hollein (1)
- Holzbau (1)
- Holzkonstruktion (1)
- Homosexualität (1)
- Horst <Designer> (1)
- Housing (1)
- Housing Policy (1)
- Human thermal plume (1)
- Hydratation (1)
- Hydro-mechanically coupled (1)
- Hydrological drought (1)
- Hypoplasticity (1)
- Hängebrücke (1)
- Hüftgelenk (1)
- Hüttensand (1)
- IAQ (1)
- IOT (1)
- Idealised urban unit model, Micro-climate simulations, Urban weather projections, Cities (1)
- Identifikation (1)
- Identität (1)
- Image processing (1)
- Immobilieninvestments, Portfoliomanagement, Entscheidungsunterstützung, Multikriterielle Analyse, Outranking, ELECTRE, Planung, Controlling (1)
- Impedance measurement (1)
- Implicit (1)
- Individualisierung (1)
- Indoor climate (1)
- Indoor environment (1)
- Industriekultur (1)
- Industrielles Bauen (1)
- Infiltration (1)
- Informatik (1)
- Information (1)
- Information Retrieval (1)
- Informationsgesellschaft (1)
- Informationsmanagement (1)
- Infrastructures (1)
- Infrastruktur (1)
- Infrastrukturplanung (1)
- Ingenieurholzbau (1)
- Instrument (1)
- Integrierte Planung (1)
- Intensivstation (1)
- Interaktion (1)
- Interaktion, Layouts, generierung (1)
- Internet der Dinge (1)
- Internet der dinge (1)
- Internet of Things (1)
- Investition (1)
- Isotropie (1)
- Isovist (1)
- Italy (1)
- Japan (1)
- Japanischer Film (1)
- Journal ranking, rating, impact factors, VHB-JOURQUAL (1)
- Journalismusförderung (1)
- Journalismusplattform (1)
- Jugoslawien (1)
- K-d Trees (1)
- K-nearest neighbors (1)
- KNN (1)
- Kabelbrücke (1)
- Kalkulation (1)
- Kalkulationsverfahren (1)
- Kamera Tracking (1)
- Kanal (1)
- Kansas City <Mo.> / University of Missouri (1)
- Kant, Immanuel (1)
- Karikatur (1)
- Kartierung (1)
- Kassel / Documenta (1)
- Katastrophe (1)
- Kategorientheorie (1)
- Kaverne (1)
- Kennzahl (1)
- Kette (1)
- Kire (1)
- Klebtechnik (1)
- Klein- und Mittelbetrieb (1)
- Klimanotstand (1)
- Knicklast (1)
- Koaxialkabel (1)
- Kohlenstoff (1)
- Kollaboratives Entwerfen (1)
- Kollisionserkennung (1)
- Kollokationsmethode (1)
- Kommunikationsprotokoll (1)
- Konflikt (1)
- Konrad (1)
- Kontamination (1)
- Konzeptkunst (1)
- Konzipieren <Technik> (1)
- Kracauer (1)
- Kramer (1)
- Krankollision (1)
- Kreis (1)
- Kremlas (1)
- Krieg (1)
- Kriegerdenkmal (1)
- Kuba (1)
- Kulturbau (1)
- Kulturhaus (1)
- Kulturwissenschaften (1)
- Kulturwissenschaftler (1)
- Kulturwissenschaftliches Studium (1)
- Kunstgeschichte (1)
- Kunsthandwerk (1)
- Kuppelstadt (1)
- Kupplung (1)
- Körper (1)
- Körperschall (1)
- Kühlkörper (1)
- Künstliche Welt <Moiv> (1)
- LED light source (1)
- Land surface temperature (1)
- Laplace-Operator (1)
- Large deformation (1)
- Laser Welding; CO2; Diode; Distortion; Finite Element Analysis; Thermal Analysis; Mechanical Analysis; Numerical Model (1)
- Laser; quartz glass; polishing; temperature; residual stress; simulation; contactless measurement (1)
- Laserschweißen (1)
- Laubenganghaus (1)
- Layout, generative Methode, evolutionäres Verfahren (1)
- Leben (1)
- Lebenszyklus <Wirtschaft> (1)
- Lehm (1)
- Leipzig (1)
- Leistungsverhalten (1)
- Leitbild (1)
- Lernen (1)
- Life cycle assessment (1)
- Lindig (1)
- Literatur (1)
- Literaturrecherche (1)
- Loading sequence (1)
- Logistics Properties (1)
- Logistik (1)
- London-Docklands (1)
- Luft (1)
- Luftdichtheit (1)
- Luftqualität (1)
- L´aszló (1)
- Lärm (1)
- Lüftung (1)
- Lüftungsanlage (1)
- M5 model tree (1)
- MATLAB (1)
- MDLSM method (1)
- Magdeburg (1)
- Magnesiumsulfat (1)
- Makroalgen (1)
- Malerei (1)
- Managementinformationssystem (1)
- Manfredo (1)
- Manufacturing (1)
- Market Analysis (1)
- Markowschke (1)
- Marmara Region (1)
- Mart (1)
- Massenfertigung (1)
- Materialverhalten (1)
- Matlab (1)
- Mattieren (1)
- Mauerwerk (1)
- Mean radiant temperature (1)
- Mechanische Eigenschaft (1)
- Medienarchäologie (1)
- Medienkultur (1)
- Medienphilosophie (1)
- Medienwirtschaft (1)
- Mehrdimensionalität (1)
- Melchior Vulpius (1)
- Mensch (1)
- Mensch-Maschine-Kommunikation (1)
- Metakaolin (1)
- Metaphorik (1)
- Methodologie (1)
- Michel (1)
- Middle-ware (1)
- Mieten (1)
- Mikrocomputer (1)
- Mikrokapsel (1)
- Mikropolitik (1)
- Mikroskopie (1)
- Mikrostruktur (1)
- Mikroverunreinigungen (1)
- Mild steel (1)
- Milieuforschung (1)
- Minimalismus <Architektur> (1)
- Mittelstand (1)
- MoS2 (1)
- Model-free status monitoring (1)
- Modellierungsmethode (1)
- Molekülstruktur (1)
- Montage (1)
- Morphologie (1)
- Moser (1)
- Motette (1)
- Multi-criteria decision making (1)
- Multi-objective Evolutionary Optimization, Elitist Non- Dominated Sorting Evolution Strategy (ENSES), Sandwich Structure, Pareto-Optimal Solutions, Evolutionary Algorithm (1)
- Multikriteria-Entscheidung (1)
- Multikriterielle Entscheidungsanalyse (1)
- Multimedia (1)
- Multiple Volume Rendering (1)
- Multiple comparative views (1)
- Museum (1)
- Museum Guidance (1)
- Musikgeschichte (1)
- Musikgeschichte Weimars (1)
- Musiktheorie (1)
- Musikwissenschaft (1)
- Mustererkennung (1)
- Mustersprache (1)
- Mörtel (1)
- NURBS (1)
- NURBS geometry (1)
- Nachtragsvereinbarung (1)
- Nagymaros (1)
- Nanofluid (1)
- Nanomaterials (1)
- Nanomechanik (1)
- Nanopore (1)
- Nanoporöser Stoff (1)
- Nanoribbons, thermal conductivity (1)
- Nanostrukturiertes Material (1)
- Nanowissenschaften (1)
- Nasskühlung (1)
- Natriumsulfat (1)
- Naturkatastrophe (1)
- Navier–Stokes equations (1)
- Network Analysis (1)
- Neuartige Sanitärsysteme (1)
- Neubrandenburg (1)
- Neugründung (1)
- Neural Networks (1)
- Neuronales Lernen (1)
- Nichtlineares Phänomen (1)
- Niederlande (1)
- Nissen (1)
- Nitratbelastung (1)
- Non-Destructive Testing (1)
- Nonlocal operator method (1)
- Numerische Strömungssimulation (1)
- Numerisches Verfahren (1)
- Oberflächentemperatur (1)
- Objekterkennung (1)
- Objektmodell (1)
- Objektorientiertes Datenbanksystem (1)
- Objektorientierung (1)
- Operations Research (1)
- Operator energy functional (1)
- Organische Architektur (1)
- Organischer Abfall (1)
- Ortslosigkeit (1)
- Ostdeutschland (1)
- Otto von (1)
- Overlay (1)
- P3P (1)
- PCM (1)
- Pakistan (1)
- Pandemie (1)
- Paraffin (1)
- Parallelverarbeitung (1)
- Parameteridentifikation (1)
- Parodiemesse (1)
- Partial differential equations (1)
- Partizipation (1)
- Paul (1)
- Pavillon (1)
- Pedestrian movement (1)
- Peer-to-Peer-Netz (1)
- Performance (1)
- Peridynamik (1)
- Peripherisierungsforschung (1)
- Perkolationstheorie (1)
- Personalized ventilation (1)
- Perspektive (1)
- Pfadanalyse (1)
- Pflasterungen (Mathematik) (1)
- Pflege (1)
- Phasenumwandlung (1)
- Philosophie (1)
- Phone-to-phone communication (1)
- Photobioreaktor (1)
- Photogrammetrie (1)
- Photographie (1)
- Photothermische Methode (1)
- Physarum polycephalum (1)
- Physikalische Eigenschaft (1)
- Pierre (1)
- Piezoelectric materials (1)
- Plasik (1)
- Plastik (1)
- Plastische Deformation (1)
- Plastizitätstheorie (1)
- Platte (1)
- Polen (1)
- Politische Philosophie (1)
- Polymorphie (1)
- Populismus (1)
- Portfoliomanagement (1)
- Post Occupancy Evaluation (1)
- Postdemokratie (1)
- Postpolitik (1)
- Postwachstum (1)
- Potential problem (1)
- Potsdam / Einsteinturm (1)
- Pozzo (1)
- Prinz> (1)
- Privatsphäre (1)
- Produktdaten (1)
- Produktgestaltung (1)
- Produktinformation (1)
- Programm (1)
- Projection (1)
- Projektdokumentation (1)
- Projektion (1)
- Projektion <Optik> (1)
- Projektplanung (1)
- Protest (1)
- Prozesslogik (1)
- Prozessmanagement (1)
- Prozesssimulation (1)
- Public-Private Partnerships (1)
- Punktwolke (1)
- Püschel (1)
- QUEST3D (1)
- Quantenphysik (1)
- Quaternion (1)
- RC frames (1)
- RSSI (1)
- Radioastronomie (1)
- Rainflow counting algorithm (1)
- Randwertproblem (1)
- Rapid Visual Screening (1)
- Raspberry Pi (1)
- Raster <Bauwesen> (1)
- Rastergrafik (1)
- Rating (1)
- Rationalismus (1)
- Raumluftströmungen (1)
- Raumordnung (1)
- Raumplanung (1)
- Real Estate Portfolio Management (1)
- Realexperimente (1)
- Reallabor (1)
- Redaktion (1)
- Reflektometrie (1)
- Regional factors of influence (1)
- Regionalstruktur (1)
- Rekonstruktion (1)
- Relative acceleration (1)
- Relaxation (1)
- Reliabilität (1)
- Rendering (1)
- Rendite (1)
- Renewable energy (1)
- Renovierung (1)
- Residentielle Mobilität (1)
- Resistenz (1)
- Resonance (1)
- Resonanz (1)
- Responsibilisierung (1)
- Ressourcen (1)
- Ressourcenallokation (1)
- Restaurierung (1)
- Richtlinien (1)
- Risikomanagement (1)
- Riss (1)
- Robert (1)
- Roboter (1)
- Robotik (1)
- Robustheit (1)
- Rotorblatt (1)
- Russland (1)
- Räumliche Beziehungen (1)
- SHM (1)
- STEP (1)
- Safety factor (1)
- Schadensakkumulation (1)
- Schadenserkennung (1)
- Schadensprognose (1)
- Schadstoffkonzentration (1)
- Scheper (1)
- Schlieren imaging (1)
- Schlierenmethode (1)
- Schlierenspiegel (1)
- Schnitt (1)
- Schriftzeichenerkennung (1)
- Schubspannung (1)
- Schulgebäude (1)
- Schweiz (1)
- Schwellenwert (1)
- Schwingungsmessung (1)
- Science-Fiction-Film (1)
- Seismic risk (1)
- Selbstgenutztes Wohneigentum (1)
- Selbstorganisation (1)
- Semper (1)
- Sensor (1)
- Serviceroboter (1)
- Setzung (1)
- Sham Feedback (1)
- Shore Spacing (1)
- Shore Stiffness (1)
- Shoring System (1)
- Sicherheit (1)
- Sicherheitsfaktor (1)
- Siedlungswasserwirtschaft (1)
- Siegfried (1)
- Sigfried (1)
- Sigmoid function (1)
- Sigurd (1)
- Silicatglas (1)
- Silikatbeschichtung (1)
- Simulations (1)
- Smartphones (1)
- Smithson (1)
- Smog (1)
- Social Housing (1)
- Social Media (1)
- Software (1)
- Softwareentwicklung (1)
- Soil (1)
- Sol-Gel (1)
- Solar (1)
- Soziale Gerechtigkeit (1)
- Soziale Medien (1)
- Sozialisation (1)
- Sozioökonomischer Wandel (1)
- Space Syntax (1)
- Spannender Baum (1)
- Spannung (1)
- Spannungs-Dehnungs-Beziehung (1)
- Spatial Relationships (1)
- Spaziergang (1)
- Sport (1)
- Stabwerk (1)
- Stadtbegriff (1)
- Stadtmarketing (1)
- Stadtsanierung (1)
- Stadtsoziologie (1)
- Stadtverkehr (1)
- Stadtökologie (1)
- Stahlbauteil (1)
- Stahlbetonkonstruktion (1)
- Stahlbrücke (1)
- Stahlträger (1)
- Stam (1)
- Standard (1)
- Stapelproblem (1)
- Start-up-Simulation (1)
- Statik (1)
- Steifigkeit (1)
- Steuerungsansätze (1)
- Stiffness matrix (1)
- Stochastik (1)
- Stochastisches Modell (1)
- Stoffeigenschaft (1)
- Stoffgesetz (1)
- Stokes-Problem (1)
- Strahlungstemperatur (1)
- Straße (1)
- Straßenbrücke (1)
- Straßenkarte (1)
- Straßennetzwerk analyse, graph-basierte generative Methoden (1)
- Stress-strain curve (1)
- Structural health monitoring (1)
- Strukturalismus (1)
- Strukturkrise (1)
- Strukturschaden (1)
- Strömung (1)
- Student (1)
- Studentenschaft (1)
- Studie (1)
- Studiengang Kulturwissenschaften (1)
- Studiotechnik (1)
- Städtischer Wohnungsmarkt (1)
- Stütze (1)
- Subjektivierung (1)
- Subobject Detection (1)
- Subobjekterkennung (1)
- Suchmaschine (1)
- Suchverfahren (1)
- Suchverhalten (1)
- Superplasticizer (1)
- Sustainability (1)
- Sustainable production (1)
- Symbol (1)
- TPOGS (1)
- Tafuri (1)
- Tampere (1)
- Taxonomie (1)
- Taylor series expansion (1)
- Teamwork (1)
- Technikphilosophie (1)
- Technische Universität (1)
- Technisches Denkmal (1)
- Text Mining (1)
- Textproduktion (1)
- Theoretische Elektrotechnik (1)
- Theorie (1)
- Thermal comfort (1)
- Thermal conductivity (1)
- Thermodynamik (1)
- Thermodynamische Eigenschaft (1)
- Thermography (1)
- Thiersch (1)
- Ton (1)
- Ton <Geologie> (1)
- Topographie (1)
- Tragwerk / Vorspannung (1)
- Trajektorie (Mathematik) (1)
- Transformation risks (1)
- Transformationsrisiken (1)
- Transient and time domain; Dams; Infiltration; Soil moisture; calibration; levee model; soil moisture measurement; spatial time domain reflectometry (1)
- Transparenz (1)
- Transport (1)
- Transportproblem (1)
- Trägheit (1)
- Tsallis entropy (1)
- Tschechoslowakei (1)
- Tschumi (1)
- Tunnel (1)
- Turmdrehkran (1)
- U-value (1)
- UASB (1)
- UCB model (1)
- Ubiquitous Computing (1)
- Ukraine (1)
- Umweltbelastung (1)
- Umweltbilanz (1)
- Umweltgerechtigkeit (1)
- Umweltverschutzung (1)
- Umweltverträglichkeit (1)
- Umweltveränderung (1)
- Uncertainty (1)
- Ungarn (1)
- Unterteilungsalgorithmen (1)
- Unterteilungsalgorithmus (1)
- Urban Analysis (1)
- Urbanität (1)
- Urheberrecht (1)
- Validierung (1)
- Variational principle (1)
- Vektorfunktion (1)
- Ventilation (1)
- Verarbeitungseigenschaft (1)
- Verband der Hochschullehrer für Betriebswirtschaftslehre (1)
- Verbundtragwerk (1)
- Verbundwerkstoff (1)
- Verkehr (1)
- Verkehrsaufkommen (1)
- Verkehrsinfrastruktur (1)
- Verkehrsmittelwahl (1)
- Verkehrsnetz (1)
- Vernetzung (1)
- Versionierung (1)
- Versionsverwaltung (1)
- Versorgungsnetz (1)
- Verteiltes Datenverarbeitungssystem (1)
- Verteiltes System (1)
- Verwundbarkeit (1)
- Vesnin (1)
- Vibration measurements (1)
- Vibratory pile driving (1)
- Videoüberwachung (1)
- Vielfalt (1)
- Villon (1)
- Virtual Studios (1)
- Virtuelle Baustelle (1)
- Virtuelle Studios (1)
- Viskoplastizität (1)
- Visualization (1)
- Vogtland (1)
- Vokalmusik (1)
- Vorgespannte Konstruktion (1)
- Vorspannung (1)
- Vulnerability (1)
- Wachstumskritik (1)
- Wartezeit (1)
- Wasser (1)
- Wasserbeständigkeit (1)
- Wasserkraftwerk (1)
- Wastewater manegement (1)
- Wechselwirkung (1)
- Weidanz (1)
- Weimar / Staatliche Bauhochschule (1)
- Weimar / Thüringisches Hauptstaatsarchiv (1)
- Welfare State (1)
- Weltausstellung (1)
- Werkkunstschule (1)
- Werkstoff (1)
- Werkstoffprüfung (1)
- Werner Max (1)
- Wettbewerb (1)
- Wetter (1)
- Wien / Haas-Haus (1)
- Wilhelm (1)
- Wind load (1)
- Windkanal (1)
- Windkraftwerk (1)
- Windlast (1)
- Wireless sensor network (1)
- Wirtschaftlichkeit (1)
- Wissenschaftliches Arbeiten (1)
- Wissenschaftskritik (1)
- Wissenschaftsorganisation (1)
- Wissenschaftspolitik (1)
- Wissenssoziologie (1)
- Wittwer (1)
- Wohnfläche (1)
- Wohnform (1)
- Wohngebiet (1)
- Wohnkultur (1)
- Wohnraum (1)
- Wohnsiedlung (1)
- Wohnsitz (1)
- Wohnstandortentscheidungen (1)
- Wohnstandortpräferenzen (1)
- Wohnungsbaupolitik (1)
- Wohnungseigentum (1)
- Wohnungsfrage (1)
- Wolgast (1)
- Wärmedurchgangszahl (1)
- Wärmeempfindung (1)
- Wärmespeicherung (1)
- Wärmeübergang (1)
- Wärmeübergangszahl (1)
- Zeitbereichsreflektometrie (1)
- Zement (1)
- Zufallsvariable (1)
- Zugversuch (1)
- Zuverlässigkeit (1)
- Zuverlässigkeitstheorie (1)
- Zürich (1)
- abstract modelling (1)
- abstraction (1)
- academic skills (1)
- academic writing (1)
- acoustical measurement (1)
- action recognition (1)
- adaptive image classification (1)
- adaptive neuro-fuzzy inference system (ANFIS) (1)
- adaptive pushover (1)
- aerodynamic models (1)
- airborne infection (1)
- alumosilicate (1)
- amine hardener (1)
- ant colony optimization algorithm (ACO) (1)
- anthropogenic micro-pollutants (1)
- antimicrobial resistance genes (1)
- artificial neural network (1)
- audience studies (1)
- automated quality control (1)
- back-pressure (1)
- background-oriented schlieren (1)
- battery (1)
- berlinite (1)
- bio-based (1)
- biodiesel (1)
- biogene Abfallstoffe (1)
- biopolitics (1)
- bodily self-consciousness; self-face identification; self–other distinction; visuo-spatial mechanisms (1)
- bolt (1)
- bridge (1)
- bridge aerodynamics (1)
- bridge aeroelasticity (1)
- building acoustics (1)
- cable force (1)
- cable stayed bridge (1)
- capsular clustering (1)
- carboxymethylcellulose (1)
- category theory (1)
- cellular automata (1)
- cement (1)
- cement clinker (1)
- cement microstructure (1)
- characteristic value (1)
- chloride binding (1)
- circumferential contact length (1)
- classification (1)
- classifier (1)
- clear channel assessments (1)
- climate chamber (1)
- climate change (1)
- climate loads (1)
- climate models (1)
- cluster analysis (1)
- cluster density (1)
- cluster shape (1)
- clustering (1)
- coaxial transmission line (1)
- cognitive load (1)
- communicative action (1)
- competition (1)
- complex data analysis (1)
- computation (1)
- computational design (1)
- computational fluid dynamics (CFD) (1)
- computational hydraulics (1)
- computational modeling (1)
- computerbasierte Entwurfsprozesse (1)
- computerbasiertes Entwerfen (1)
- concrete (1)
- congestion control (1)
- congestion; signaled intersections; traffic capacity (1)
- content platforms (1)
- coronary artery disease (1)
- correlation; factors; loss of life in accidents; modeling; Road traffic accidents; socio-economic aspect; statistical analysis (1)
- crack (1)
- crack detection (1)
- crack propagation (1)
- crack sensor; fibre optic sensor; humidity sensor; SHM (1)
- crane collision (1)
- criminal justice (1)
- cross-contamination (1)
- cryogenic suction (1)
- curing agent (1)
- cybernetics (1)
- cycle ergometer (1)
- damage identification (1)
- dams (1)
- deep learning (1)
- deep learning neural network (1)
- degradation (1)
- demand response programs (1)
- depletion method (1)
- desk fan (1)
- dielectric materials (1)
- dielectric measurements (1)
- dielectric spectroscopy (1)
- diesel engines (1)
- diffusion limited aggregation (1)
- diffusion-contact model (1)
- digital journalism (1)
- digital light projection (1)
- digital native news media (1)
- digital-born news media (1)
- digitale Produktmodellierung (1)
- digitales Gebäudemodell (1)
- digitization (1)
- dimensionality reduction (1)
- discrete Dirac operator (1)
- discrete boundary value problems (1)
- discrete fourier transform (1)
- discrete fundamental solution (1)
- discrete monogenic functions (1)
- diskrete Fourier-Transformation (1)
- dual-support (1)
- duty-cycles (1)
- earthquake damage (1)
- earthquake engineering (1)
- earthquake vulnerability assessment (1)
- education (1)
- electromagnetic scattering (1)
- electromagnetic waves (1)
- energetic approach (1)
- energy consumption (1)
- energy demand (1)
- energy efficiency (1)
- energy form (1)
- energy justice (1)
- energy per order (1)
- energy retrofitting (1)
- energy, exergy (1)
- engineering (1)
- ensemble model (1)
- entrepreneurial journalism (1)
- epoxy (1)
- estimation (1)
- etching (1)
- europe (1)
- experimental validation (1)
- experimentelles Wissen (1)
- explicit time integration (1)
- extreme events (1)
- extreme pressure (1)
- extreme value analysis (1)
- eye-tracking (1)
- field repair organization (1)
- firefly optimization algorithm (1)
- fisher-information matrix (1)
- fixed effects regression (1)
- flexural-torsional-buckling (1)
- flow pattern (1)
- focussed ion beam (1)
- fog computing (1)
- food informatics (1)
- formal approaches (1)
- forward contracts (1)
- foundations (1)
- fractional-order control (1)
- fracture mechanics (1)
- free vibration test (1)
- frequency sweep test (1)
- full-waveform inversion (1)
- functionally graded materials (1)
- fused filament fabrication (1)
- fuzzy decision making (1)
- fuzzy set qualitative comparative analysis (1)
- game engine (1)
- generative design system (1)
- genetic programming (1)
- geografische Metapher (1)
- geoinformatics (1)
- geopolymer (1)
- gewaltbezogene Institution (1)
- glass frosting (1)
- green gentrification (1)
- grey water treatment (1)
- ground structure (1)
- ground water contamination (1)
- growth mode (1)
- gully erosion susceptibility (1)
- gypsum, metallurgical dust, multi-walled carbon nanotubes, water resistance, calcium hydrosilicates, X-ray analyze, microstructure. (1)
- health (1)
- health informatics (1)
- heart disease diagnosis (1)
- heat sink (1)
- heat storage (1)
- heat transfer (1)
- hermochemical heat storage, hydration mechanism, magnesium sulfate; sodium sulfate (1)
- high performance fine-grained concrete, rice husk ash, workability, compressive strength, splitting tensile strength, chloride penetration resistance (1)
- housing (1)
- human blob (1)
- human body proportions (1)
- human thermal plume (1)
- hybrid machine learning (1)
- hybrid machine learning model (1)
- hybride Werkstoffe (1)
- hydraulic jump (1)
- hydrological model (1)
- hydrology (1)
- image processing (1)
- image segmentation (1)
- industry 4.0 (1)
- initerfacial water, liquid-like water, Mars, dielectric spectroscopy, ice, permittivity, JSC Mars 1, Bentonite, Birchak, CRIM, plate capacitor, monolayer, Hamaker constant, soil (1)
- initial equilibrium state (1)
- initial shape (1)
- intensive care unit (1)
- inverse analysis (1)
- isosurface (1)
- journalism (1)
- journalism products (1)
- journalism theories (1)
- kommunikativer Konstruktivismus (1)
- kritische Stadtforschung (1)
- künstlerischer Aktivismus (1)
- laplace operator (1)
- laser; contactless measurement; quartz glass; polishing; temperature; residual stress; simulation; sensitivity (1)
- least square support vector machine (LSSVM) (1)
- longitudinal dispersion coefficient (1)
- low-carbon policy (1)
- macro algae (1)
- mass spectrometry (1)
- mathematical model (1)
- mathematical modelling (1)
- mean-squared error (1)
- media anthropology, anthropomediality, anthropological knowledge, museum exhibitions, diorama, relationality (1)
- media performance (1)
- media work (1)
- metakaoline (1)
- micro climate (1)
- micro-CT (1)
- micro-pollutant treatment (1)
- microbial resistances (1)
- microcapsule (1)
- microclimate (1)
- micropolar elasticity (1)
- microwave propagation (1)
- mining (1)
- mitigation (1)
- mobile ad-hoc networks (1)
- model comparison (1)
- model complexity (1)
- modelling (1)
- molecular dynamics (1)
- monitoring (1)
- mortar (1)
- multi-agent systems (1)
- multi-criteria decision analysis (1)
- multi-criteria decision analysis; (1)
- multimedia design principles (1)
- multimedia learning (1)
- museum guidance system (1)
- nanofluid (1)
- nanoreinforced composites (1)
- natural hazard (1)
- neural architecture search (1)
- neural networks (NNs) (1)
- news media start-up (1)
- news start-ups (1)
- noise (1)
- nonlocal Hessian operator (1)
- nonlocal operator method (1)
- nonlocal theory (1)
- nonstationarity (1)
- numerical modelling (1)
- numerical simulation (1)
- occupant requirements (1)
- occupant satisfaction (1)
- open-ended coaxial probe (1)
- openings (1)
- operator calculus (1)
- operator energy functional (1)
- organisation of and institutions for research in Germany (1)
- organischer Abfall (1)
- out-of-plane seismic load (1)
- partical swarm optimization (1)
- particles concentration (1)
- perception (1)
- peridynamics (1)
- personalisierte Lüftung (1)
- personalization effect (1)
- phase change materials (1)
- phosphate industry (1)
- phosphoric acid (1)
- photobioreactor (1)
- photocatalytic ozonation (1)
- photovoltaic (1)
- photovoltaic-thermal (PV/T) (1)
- physical activities (1)
- physicochemical properties of geomaterials (1)
- physics-informed activation function (1)
- planetary research (1)
- politische Repräsentation (1)
- polycarboxylate ether (1)
- polymer adsorption (1)
- polymorphe Unschärfemodellierung (1)
- practice theories (1)
- practice theory (1)
- precipitation (1)
- prediction (1)
- predictive algorithms (1)
- predictive model (1)
- principal component analysis (1)
- privacy, mobile identity management, location-based applications, p3p (1)
- protoplasmic tubes, Nucleolus-Organisator-Region (1)
- public health (1)
- public service media (1)
- public space (1)
- quaternionic analysis (1)
- questionnaire (1)
- radiological and chemical properties (1)
- randomized spectral representation (1)
- rapid assessment (1)
- rapid classification (1)
- rasterization (1)
- reactor design (1)
- real-time monitoring (1)
- received signal strength indicator (1)
- rectangular lattice (1)
- refugee district (1)
- regional development (1)
- reinforcement learning (1)
- remote sensing (1)
- rendering (1)
- research methodology (1)
- research process (1)
- resource-oriented sanitation (1)
- response surface methodology (1)
- retailer (1)
- rice (1)
- risk management (1)
- rivers (1)
- robots; companions; servants; literature; theater; film (1)
- rule based classification (1)
- salt frost attack (1)
- salt hydrate (1)
- schlieren velocimetry (1)
- scientific visualization, virtual environments, Big Data, radio astronomy (1)
- seasonal precipitation (1)
- seismic assessment (1)
- seismic hazard analysis (1)
- seismic risk estimation (1)
- seismic vulnerability (1)
- self-healing concrete (1)
- semi-probabilistic concept (1)
- signal processing (1)
- simulation (1)
- singular value decomposition (1)
- site-specific spectrum (1)
- smart sensors (1)
- smooth rectangular channel (1)
- social accessibility (1)
- social justice (1)
- social theory (1)
- sodium silicate solution (1)
- soil temperature (1)
- soil-structure interaction (1)
- sound pressure level prediction (1)
- source separation (1)
- soziale Kämpfe (1)
- spatial analysis (1)
- spatiotemporal database (1)
- spearman correlation coefficient (1)
- sport (1)
- square root cubature calman filter (1)
- stability (1)
- standard deviation of pressure fluctuations (1)
- statistical analysis (1)
- statistical coeffcient of the probability distribution (1)
- steel (1)
- stilling basin (1)
- stochastic programming (1)
- structural engineering (1)
- structural vulnerability (1)
- structure-borne sound (1)
- structure-borne sound sources (1)
- städtische Strukturen (1)
- sugarcane (1)
- summer overheating in buildings (1)
- superpixel (1)
- superplasticizer (1)
- superplasticizers (1)
- supervised learning (1)
- support vector regression (1)
- sustainability (1)
- tangible user interface (1)
- tapped blind holes (1)
- theory development (1)
- thermal manikin (1)
- thermal sensation (1)
- thermisches Empfinden (1)
- thermography (1)
- threat (1)
- three-dimensional truss structures (1)
- titan dioxide (1)
- titanium dioxid (1)
- tomography (1)
- topology optimization (1)
- tower-like structures (1)
- tracer gas (1)
- trade-offs (1)
- training (1)
- transmitted light microscopy (1)
- triad of violence (1)
- type theory (1)
- type-3 fuzzy systems (1)
- ulva intestinalis (1)
- unreinforced masonry infill walls (1)
- uranium tailing deposit (1)
- urban form (1)
- urban form; Geographical Information System;walking experience; isovists; logistic regression (1)
- urban health (1)
- urban heat island effect (1)
- urban modeling (1)
- urban perception (1)
- urban planning (1)
- urban political ecology (1)
- urban research-quantitative (1)
- urban sustainability (1)
- validation (1)
- vanillin (1)
- vertical green system (1)
- vibration-based damage identification (1)
- vibration-based methodology (1)
- violence (1)
- virtual environment (1)
- virtuelle Baustelle (1)
- visible spectrophotometry (1)
- wastewater treatment (1)
- water content measurement; TDR probe; clay-rock; dielectric spectroscopy; frequency domain finite element modeling (1)
- water quality (1)
- wave propagation (1)
- wavelet transform (1)
- weak form (1)
- wind turbine rotor blades (1)
- wireless sensor network (1)
- Ägypten (1)
- Ätzen (1)
- Öffentlich-private Partnerschaft (1)
- Öffentlich-rechtlicher Rundfunk (1)
- Öffentlicher Sektor (1)
- Öffentliches Gebäude (1)
- Öffentlichkeit (1)
- Ökologie (1)
- Überhitzung (1)
- Überschwemmung (1)
- äquivalente Temperatur (1)
Electric trains are considered one of the most eco-friendly and safest means of transportation. Catenary poles are used worldwide to support overhead power lines for electric trains. The performance of the catenary poles has an extensive influence on the integrity of the train systems and, consequently, the connected human services. It became a must nowadays to develop SHM systems that provide the instantaneous status of catenary poles in- service, making the decision-making processes to keep or repair the damaged poles more feasible. This study develops a data-driven, model-free approach for status monitoring of cantilever structures, focusing on pre-stressed, spun-cast ultrahigh-strength concrete catenary poles installed along high-speed train tracks. The pro-posed approach evaluates multiple damage features in an unfied damage index, which leads to straightforward interpretation and comparison of the output. Besides, it distinguishes between multiple damage scenarios of the poles, either the ones caused by material degradation of the concrete or by the cracks that can be propagated during the life span of the given structure. Moreover, using a logistic function to classify the integrity of structure avoids the expensive learning step in the existing damage detection approaches, namely, using the modern machine and deep learning methods. The findings of this study look very promising when applied to other types of cantilever structures, such as the poles that support the power transmission lines, antenna masts, chimneys, and wind turbines.
This study proposes an efficient Bayesian, frequency-based damage identification approach to identify damages in cantilever structures with an acceptable error rate, even at high noise levels. The catenary poles of electric high-speed train systems were selected as a realistic case study to cover the objectives of this study. Compared to other frequency-based damage detection approaches described in the literature, the proposed approach is efficiently able to detect damages in cantilever structures to higher levels of damage detection, namely identifying both the damage location and severity using a low-cost structural health monitoring (SHM) system with a limited number of sensors; for example, accelerometers. The integration of Bayesian inference, as a stochastic framework, in the proposed approach, makes it possible to utilize the benefit of data fusion in merging the informative data from multiple damage features, which increases the quality and accuracy of the results. The findings provide the decision-maker with the information required to manage the maintenance, repair, or replacement procedures.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien'
This dataset consists mainly of two subsets. The first subset includes measurements and simulation data conducted to validate the simulation tool ENVI-met. The measurements were conducted at the campus of the Bauhaus-University Weimar in Weimar, Germany and consisted of recording exterior air temperature, globe temperature, relative humidity, and wind velocity at 1.5 m at four points on four different days. After the measurements, the geometry of the campus was modelled and meshed; the simulations were conducted using the weather data of the measurements days with the aim of investigating the accuracy of the model.
The second data subset consists of ENVI-met simulation data of the potential of facade greening in improving the outdoor environment and the indoor air temperature during heatwaves in Central European cities. The data consist of the boundary conditions and the simulation output of two simulation models: with and without facade greening. The geometry of the models corresponded to a residential buildings district in Stuttgart, Germany. The simulation output consisted of exterior air temperature, mean radiant temperature, relative humidity, and wind velocity at 12 different probe points in the model in addition to the indoor air temperature of an exemplary building. The dataset presents both vertical profiles of the probed parameters as well as the time series output of the five-day simulation duration. Both data subsets correspond to the investigations presented in the co-submitted article [1].
Besides their multiple known benefits regarding urban microclimate, living walls can be used as decentralized stand-alone systems to treat greywater locally at the buildings. While this offers numerous environmental advantages, it can have a considerable impact on the hygrothermal performance of the facade as such systems involve bringing large quantities of water onto the facade. As it is difficult to represent complex entities such as plants in the typical simulation tools used for heat and moisture transport, this study suggests a new approach to tackle this challenge by coupling two tools: ENVI-Met and Delphin. ENVI-Met was used to simulate the impact of the plants to determine the local environmental parameters at the living wall. Delphin, on the other hand, was used to conduct the hygrothermal simulations using the local parameters calculated by ENVI-Met. Four wall constructions were investigated in this study: an uninsulated brick wall, a precast concrete plate, a sandy limestone wall, and a double-shell wall. The results showed that the living wall improved the U-value, the exterior surface temperature, and the heat flux through the wall. Moreover, the living wall did not increase the risk of moisture in the wall during winter and eliminated the risk of condensation.
This dataset presents the numerical analysis of the heat and moisture transport through a facade equipped with a living wall system designated for greywater treatment. While such greening systems provide many environmental benefits, they involve pumping large quantities of water onto the wall assembly, which can increase the risk of moisture in the wall as well as impaired energetic performance due to increased thermal conductivity with increased moisture content in the building materials. This dataset was acquired through numerical simulation using the coupling of two simulation tools, namely Envi-Met and Delphin. This coupling was used to include the complex role the plants play in shaping the near-wall environmental parameters in the hygrothermal simulations. Four different wall assemblies were investigated, each assembly was assessed twice: with and without the living wall. The presented data include the input and output parameters of the simulations, which were presented in the co-submitted article [1].
Physical exercise demonstrates a special case of aerosol emission due to its associated elevated breathing rate. This can lead to a faster spread of airborne viruses and respiratory diseases. Therefore, this study investigates cross-infection risk during training. Twelve human subjects exercised on a cycle ergometer under three mask scenarios: no mask, surgical mask, and FFP2 mask. The emitted aerosols were measured in a grey room with a measurement setup equipped with an optical particle sensor. The spread of expired air was qualitatively and quantitatively assessed using schlieren imaging. Moreover, user satisfaction surveys were conducted to evaluate the comfort of wearing face masks during training. The results indicated that both surgical and FFP2 masks significantly reduced particles emission with a reduction efficiency of 87.1% and 91.3% of all particle sizes, respectively. However, compared to surgical masks, FFP2 masks provided a nearly tenfold greater reduction of the particle size range with long residence time in the air (0.3–0.5 μm). Furthermore, the investigated masks reduced exhalation spreading distances to less than 0.15 m and 0.1 m in the case of the surgical mask and FFP2 mask, respectively. User satisfaction solely differed with respect to perceived dyspnea between no mask and FFP2 mask conditions.
Performance assessment of a ductless personalized ventilation system using a validated CFD model
(2018)
The aim of this study is twofold: to validate a computational fluid dynamics (CFD) model, and then to use the validated model to evaluate the performance of a ductless personalized ventilation (DPV) system. To validate the numerical model, a series of measurements was conducted in a climate chamber equipped with a thermal manikin. Various turbulence models, settings, and options were tested; simulation results were compared to the measured data to determine the turbulence model and solver settings that achieve the best agreement between the measured and simulated values. Subsequently, the validated CFD model was then used to evaluate the thermal environment and indoor air quality in a room equipped with a DPV system combined with displacement ventilation. Results from the numerical model were then used to quantify thermal sensation and comfort using the UC Berkeley thermal comfort model.
Personalized ventilation (PV) is a mean of delivering conditioned outdoor air into the breathing zone of the occupants. This study aims to qualitatively investigate the personalized flows using two methods of visualization: (1) schlieren imaging using a large schlieren mirror and (2) thermography using an infrared camera. While the schlieren imaging was used to render the velocity and mass transport of the supplied flow, thermography was implemented to visualize the air temperature distribution induced by the PV. Both studies were conducted using a thermal manikin to simulate an occupant facing a PV outlet. As a reference, the flow supplied by an axial fan and a cased axial fan was visualized with the schlieren system as well and compared to the flow supplied by PV. Schlieren visualization results indicate that the steady, low-turbulence flow supplied by PV was able to penetrate the thermal convective boundary layer encasing the manikin's body, providing clean air for inhalation. Contrarily, the axial fan diffused the supplied air over a large target area with high turbulence intensity; it only disturbed the convective boundary layer rather than destroying it. The cased fan supplied a flow with a reduced target area which allowed supplying more air into the breathing zone compared to the fan. The results of thermography visualization showed that the supplied cool air from PV penetrated the corona-shaped thermal boundary layer. Furthermore, the supplied air cooled the surface temperature of the face, which indicates the large impact of PV on local thermal sensation and comfort.
Personalisierte Lüftung (PL) kann die thermische Behaglichkeit sowie die Qualität der eingeatmeten Atemluft verbessern, in dem jedem Arbeitsplatz Frischluft separat zugeführt wird. In diesem Beitrag wird die Wirkung der PL auf die thermische Behaglichkeit der Nutzer unter sommerlichen Randbedingungen untersucht. Hierfür wurden zwei Ansätze zur Bewertung des Kühlungseffekts der PL untersucht: basierend auf (1) der äquivalenten Temperatur und (2) dem thermischen Empfinden. Grundlage der Auswertung sind in einer Klimakammer gemessene sowie numerisch simulierte Daten. Vor der Durchführung der Simulationen wurde das numerische Modell zunächst anhand der gemessenen Daten validiert. Die Ergebnisse zeigen, dass der Ansatz basierend auf dem thermischen Empfinden zur Evaluierung des Kühlungseffekts der PL sinnvoller sein kann, da bei diesem die komplexen physiologischen Faktoren besser berücksichtigt werden.
The performance of ductless personalized ventilation (DPV) was compared to the performance of a typical desk fan since they are both stand-alone systems that allow the users to personalize their indoor environment. The two systems were evaluated using a validated computational fluid dynamics (CFD) model of an office room occupied by two users. To investigate the impact of DPV and the fan on the inhaled air quality, two types of contamination sources were modelled in the domain: an active source and a passive source. Additionally, the influence of the compared systems on thermal comfort was assessed using the coupling of CFD with the comfort model developed by the University of California, Berkeley (UCB model). Results indicated that DPV performed generally better than the desk fan. It provided better thermal comfort and showed a superior performance in removing the exhaled contaminants. However, the desk fan performed better in removing the contaminants emitted from a passive source near the floor level. This indicates that the performance of DPV and desk fans depends highly on the location of the contamination source. Moreover, the simulations showed that both systems increased the spread of exhaled contamination when used by the source occupant.
This study investigates the performance of two systems: personalized ventilation (PV) and ductless personalized ventilation (DPV). Even though the literature indicates a compelling performance of PV, it is not often used in practice due to its impracticality. Therefore, the present study assesses the possibility of replacing the inflexible PV with DPV in office rooms equipped with displacement ventilation (DV) in the summer season. Numerical simulations were utilized to evaluate the inhaled concentration of pollutants when PV and DPV are used. The systems were compared in a simulated office with two occupants: a susceptible occupant and a source occupant. Three types of pollution were simulated: exhaled infectious air, dermally emitted contamination, and room contamination from a passive source. Results indicated that PV improved the inhaled air quality regardless of the location of the pollution source; a higher PV supply flow rate positively impacted the inhaled air quality. Contrarily, the performance of DPV was highly sensitive to the source location and the personalized flow rate. A higher DPV flow rate tends to decrease the inhaled air quality due to increased mixing of pollutants in the room. Moreover, both systems achieved better results when the personalized system of the source occupant was switched off.
The node moving and multistage node enrichment adaptive refinement procedures are extended in mixed discrete least squares meshless (MDLSM) method for efficient analysis of elasticity problems. In the formulation of MDLSM method, mixed formulation is accepted to avoid second-order differentiation of shape functions and to obtain displacements and stresses simultaneously. In the refinement procedures, a robust error estimator based on the value of the least square residuals functional of the governing differential equations and its boundaries at nodal points is used which is inherently available from the MDLSM formulation and can efficiently identify the zones with higher numerical errors. The results are compared with the refinement procedures in the irreducible formulation of discrete least squares meshless (DLSM) method and show the accuracy and efficiency of the proposed procedures. Also, the comparison of the error norms and convergence rate show the fidelity of the proposed adaptive refinement procedures in the MDLSM method.
Energy‐Efficient Method for Wireless Sensor Networks Low‐Power Radio Operation in Internet of Things
(2020)
The radio operation in wireless sensor networks (WSN) in Internet of Things (IoT)applications is the most common source for power consumption. Consequently, recognizing and controlling the factors affecting radio operation can be valuable for managing the node power consumption. Among essential factors affecting radio operation, the time spent for checking the radio is of utmost importance for monitoring power consumption. It can lead to false WakeUp or idle listening in radio duty cycles and ContikiMAC. ContikiMAC is a low‐power radio duty‐cycle protocol in Contiki OS used in WakeUp mode, as a clear channel assessment (CCA) for checking radio status periodically. This paper presents a detailed analysis of radio WakeUp time factors of ContikiMAC. Furthermore, we propose a lightweight CCA (LW‐CCA) as an extension to ContikiMAC to reduce the Radio Duty‐Cycles in false WakeUps and idle listening though using dynamic received signal strength indicator (RSSI) status check time. The simulation results in the Cooja simulator show that LW‐CCA reduces about 8% energy consumption in nodes while maintaining up to 99% of the packet delivery rate (PDR).
Der vorliegende Beitrag ist in zwei thematische Teilebereiche gegliedert. Der erste Teil beschäftigt sich mit der Analyse von Graphen, insbesondere von Graphen, die Straßennetzwerke repräsentieren. Hierzu werden Methoden aus der Graphentheorie angewendet und Kenngrößen aus der Space Syntax Methode ausgewertet. Ein Framework, welches basierend auf der Graphentheorie in Architektur und Stadtplanung Einzug gehalten hat, ist die Space Syntax Methode. Sie umfasst die Ableitung unterschiedlicher Kenngrößen eines Graphen bzw. Netzwerkes, wodurch eine Analyse für architektonische und stadtplanerische Zwecke ermöglicht wird.
Der zweite Teil dieses Berichts beschäftigt sich mit der Generierung von Graphen, insbe-sondere der von Straßennetzwerkgraphen. Die generativen Methoden basieren zum Teil auf den gewonnenen Erkenntnissen der Analyse von Straßennetzwerken. Es werden unterschiedliche Ansätze untersucht, um verschiedene Parameterwerte zur Generierung von Straßengraphen festzulegen. Als Ergebnis der Arbeiten ist ein Softwaretool entstanden, welches es erlaubt, auf Grundlage einer Voronoi-Tesselierung realistische Straßennetzwerkgraphen zu erzeugen.
Within the scope of literature, the influence of openings within the infill walls that are bounded by a reinforced concrete frame and excited by seismic drift forces in both in- and out-of-plane direction is still uncharted. Therefore, a 3D micromodel was developed and calibrated thereafter, to gain more insight in the topic. The micromodels were calibrated against their equivalent physical test specimens of in-plane, out-of-plane drift driven tests on frames with and without infill walls and openings, as well as out-of-plane bend test of masonry walls. Micromodels were rectified based on their behavior and damage states. As a result of the calibration process, it was found that micromodels were sensitive and insensitive to various parameters, regarding the model’s behavior and computational stability. It was found that, even within the same material model, some parameters had more effects when attributed to concrete rather than on masonry. Generally, the in-plane behavior of infilled frames was found to be largely governed by the interface material model. The out-of-plane masonry wall simulations were governed by the tensile strength of both the interface and masonry material model. Yet, the out-of-plane drift driven test was governed by the concrete material properties.
Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration
(2023)
Structures and their components experience substantially large vibration amplitudes at resonance, which can cause their failure. The scope of this study is the utilization of silicone-coated steel balls in concrete as damping aggregates to suppress the resonance vibration. The heavy steel cores oscillate with a frequency close to the resonance frequency of the structure. Due to the phase difference between the vibrations of the cores and the structure, the cores counteract the vibration of the structure. The core-coating inclusions are randomly distributed in concrete similar to standard aggregates. This mixture is referred to as metaconcrete. The main goal of this work is to validate the ability of the inclusions to suppress mechanical vibration through laboratory experiments. For this purpose, two small-scale metaconcrete beams were cast and tested. In a free vibration test, the metaconcrete beams exhibited a larger damping ratio compared to a similar beam cast from conventional concrete. The vibration amplitudes of the metaconcrete beams at resonance were measured with a frequency sweep test. In comparison with the conventional concrete beam, both metaconcrete beams demonstrated smaller vibration amplitudes. Both experiments verified an improvement in the dynamic response of the metaconcrete beams at resonance vibration.
Resonance vibration of structures is an unpleasant incident that can be conventionally avoided by using a Tuned Mass Damper (TMD). The scope of this paper contains the utilization of engineered inclusions in concrete as damping aggregates to suppress resonance vibration similar to a TMD. The inclusions are composed of a stainless-steel core with a spherical shape coated with silicone. This configuration has been the subject of several studies and it is best known as Metaconcrete. This paper presents the procedure of a free vibration test conducted with two small-scaled concrete beams. The beams exhibited a higher damping ratio after the core-coating element was secured to them. Subsequently, two meso-models of small-scaled beams were created: one representing conventional concrete and the other representing concrete with the core-coating inclusions. The frequency response curves of the models were obtained. The change in the response peak verified the ability of the inclusions to suppress the resonance vibration. This study concludes that the core-coating inclusions can be utilized in concrete as damping aggregates.
A safe and economic structural design based on the semi-probabilistic concept requires statistically representative safety elements, such as characteristic values, design values, and partial safety factors. Regarding climate loads, the safety levels of current design codes strongly reflect experiences based on former measurements and investigations assuming stationary conditions, i.e. involving constant frequencies and intensities. However, due to climate change, occurrence of corresponding extreme weather events is expected to alter in the future influencing the reliability and safety of structures and their components. Based on established approaches, a systematically refined data-driven methodology for the determination of design parameters considering nonstationarity as well as standardized targets of structural reliability or safety, respectively, is therefore proposed. The presented procedure picks up fundamentals of European standardization and extends them with respect to nonstationarity by applying a shifting time window method. Taking projected snow loads into account, the application of the method is exemplarily demonstrated and various influencing parameters are discussed.
Paper-based data acquisition and manual transfer between incompatible software or data formats during inspections of bridges, as done currently, are time-consuming, error-prone, cumbersome, and lead to information loss. A fully digitized workflow using open data formats would reduce data loss, efforts, and the costs of future inspections. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information among different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focuses on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing.
Object-Oriented Damage Information Modeling Concepts and Implementation for Bridge Inspection
(2022)
Bridges are designed to last for more than 50 years and consume up to 50% of their life-cycle costs during their operation phase. Several inspections and assessment actions are executed during this period. Bridge and damage information must be gathered, digitized, and exchanged between different stakeholders. Currently, the inspection and assessment practices rely on paper-based data collection and exchange, which is time-consuming and error-prone, and leads to loss of information. Storing and exchanging damage and building information in a digital format may lower costs and errors during inspection and assessment and support future needs, for example, immediate simulations regarding performance assessment, automated maintenance planning, and mixed reality inspections. This study focused on the concept for modeling damage information to support bridge reviews and structural analysis. Starting from the definition of multiple use cases and related requirements, the data model for damage information is defined independently from the subsequent implementation. In the next step, the implementation via an established standard is explained. Functional tests aim to identify problems in the concept and implementation. To show the capability of the final model, two example use cases are illustrated: the inspection review of the entire bridge and a finite-element analysis of a single component. Main results are the definition of necessary damage data, an object-oriented damage model, which supports multiple use cases, and the implementation of the model in a standard. Furthermore, the tests have shown that the standard is suitable to deliver damage information; however, several software programs lack proper implementation of the standard.
In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4% and 2% of its construction cost per year over its entire life cycle. This means that up to 80% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed.
Welche Zukünfte?
(2017)
This study is focused on finite element analysis of a model comprising femur into which a femoral component of a total hip replacement was implanted. The considered prosthesis is fabricated from a functionally graded material (FGM) comprising a layer of a titanium alloy bonded to a layer of hydroxyapatite. The elastic modulus of the FGM was adjusted in the radial, longitudinal, and longitudinal-radial directions by altering the volume fraction gradient exponent. Four cases were studied, involving two different methods of anchoring the prosthesis to the spongy bone and two cases of applied loading. The results revealed that the FG prostheses provoked more SED to the bone. The FG prostheses carried less stress, while more stress was induced to the bone and cement. Meanwhile, less shear interface stress was stimulated to the prosthesis-bone interface in the noncemented FG prostheses. The cement-bone interface carried more stress compared to the prosthesis-cement interface. Stair climbing induced more harmful effects to the implanted femur components compared to the normal walking by causing more stress. Therefore, stress shielding, developed stresses, and interface stresses in the THR components could be adjusted through the controlling stiffness of the FG prosthesis by managing volume fraction gradient exponent.
Current disaster management procedures rely primarily on heuristics which result in their strategies being very cautious and sub-optimum in terms of saving life, minimising damage and returning the building to its normal function. Also effective disaster management demands decentralized, dynamic, flexible, short term and across domain resource sharing, which is not well supported by existing distributing computing infrastructres. The paper proposes a conceptual framework for emergency management in the built environment, using Semantic Grid as an integrating platform for different technologies. The framework supports a distributed network of specialists in built environment, including structural engineers, building technologists, decision analysts etc. It brings together the necessary technology threads, including the Semantic Web (to provide a framework for shared definitions of terms, resources and relationships), Web Services (to provide dynamic discovery and integration) and Grid Computing (for enhanced computational power, high speed access, collaboration and security control) to support rapid formation of virtual teams for disaster management. The proposed framework also make an extensive use of modelling and simulation (both numerical and using visualisations), data mining (to find resources in legacy data sets) and visualisation. It also include a variety of hardware instruments with access to real time data. Furthermore the whole framework is centred on collaborative working by the virtual team. Although focus of this paper is on disaster management, many aspects of the discussed Grid and Visualisation technologies will be useful for any other forms of collaboration. Conclusions are drawn about the possible future impact on the built environment.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer'
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer'
Wissenschaftliches Kolloquium vom 24. bis 27. April 2003 in Weimar an der Bauhaus-Universität zum Thema: ‚MediumArchitektur - Zur Krise der Vermittlung'
A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model
Prediction of the groundwater nitrate concentration is of utmost importance for pollution control and water resource management. This research aims to model the spatial groundwater nitrate concentration in the Marvdasht watershed, Iran, based on several artificial intelligence methods of support vector machine (SVM), Cubist, random forest (RF), and Bayesian artificial neural network (Baysia-ANN) machine learning models. For this purpose, 11 independent variables affecting groundwater nitrate changes include elevation, slope, plan curvature, profile curvature, rainfall, piezometric depth, distance from the river, distance from residential, Sodium (Na), Potassium (K), and topographic wetness index (TWI) in the study area were prepared. Nitrate levels were also measured in 67 wells and used as a dependent variable for modeling. Data were divided into two categories of training (70%) and testing (30%) for modeling. The evaluation criteria coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and Nash–Sutcliffe efficiency (NSE) were used to evaluate the performance of the models used. The results of modeling the susceptibility of groundwater nitrate concentration showed that the RF (R2 = 0.89, RMSE = 4.24, NSE = 0.87) model is better than the other Cubist (R2 = 0.87, RMSE = 5.18, NSE = 0.81), SVM (R2 = 0.74, RMSE = 6.07, NSE = 0.74), Bayesian-ANN (R2 = 0.79, RMSE = 5.91, NSE = 0.75) models. The results of groundwater nitrate concentration zoning in the study area showed that the northern parts of the case study have the highest amount of nitrate, which is higher in these agricultural areas than in other areas. The most important cause of nitrate pollution in these areas is agriculture activities and the use of groundwater to irrigate these crops and the wells close to agricultural areas, which has led to the indiscriminate use of chemical fertilizers by irrigation or rainwater of these fertilizers is washed and penetrates groundwater and pollutes the aquifer.
This study aims to evaluate a new approach in modeling gully erosion susceptibility (GES) based on a deep learning neural network (DLNN) model and an ensemble particle swarm optimization (PSO) algorithm with DLNN (PSO-DLNN), comparing these approaches with common artificial neural network (ANN) and support vector machine (SVM) models in Shirahan watershed, Iran. For this purpose, 13 independent variables affecting GES in the study area, namely, altitude, slope, aspect, plan curvature, profile curvature, drainage density, distance from a river, land use, soil, lithology, rainfall, stream power index (SPI), and topographic wetness index (TWI), were prepared. A total of 132 gully erosion locations were identified during field visits. To implement the proposed model, the dataset was divided into the two categories of training (70%) and testing (30%). The results indicate that the area under the curve (AUC) value from receiver operating characteristic (ROC) considering the testing datasets of PSO-DLNN is 0.89, which indicates superb accuracy. The rest of the models are associated with optimal accuracy and have similar results to the PSO-DLNN model; the AUC values from ROC of DLNN, SVM, and ANN for the testing datasets are 0.87, 0.85, and 0.84, respectively. The efficiency of the proposed model in terms of prediction of GES was increased. Therefore, it can be concluded that the DLNN model and its ensemble with the PSO algorithm can be used as a novel and practical method to predict gully erosion susceptibility, which can help planners and managers to manage and reduce the risk of this phenomenon.
Piping erosion is one form of water erosion that leads to significant changes in the landscape and environmental degradation. In the present study, we evaluated piping erosion modeling in the Zarandieh watershed of Markazi province in Iran based on random forest (RF), support vector machine (SVM), and Bayesian generalized linear models (Bayesian GLM) machine learning algorithms. For this goal, due to the importance of various geo-environmental and soil properties in the evolution and creation of piping erosion, 18 variables were considered for modeling the piping erosion susceptibility in the Zarandieh watershed. A total of 152 points of piping erosion were recognized in the study area that were divided into training (70%) and validation (30%) for modeling. The area under curve (AUC) was used to assess the effeciency of the RF, SVM, and Bayesian GLM. Piping erosion susceptibility results indicated that all three RF, SVM, and Bayesian GLM models had high efficiency in the testing step, such as the AUC shown with values of 0.9 for RF, 0.88 for SVM, and 0.87 for Bayesian GLM. Altitude, pH, and bulk density were the variables that had the greatest influence on the piping erosion susceptibility in the Zarandieh watershed. This result indicates that geo-environmental and soil chemical variables are accountable for the expansion of piping erosion in the Zarandieh watershed.
The point collocation method of finite spheres (PCMFS) is used to model the hyperelastic response of soft biological tissue in real time within the framework of virtual surgery simulation. The proper orthogonal decomposition (POD) model order reduction (MOR) technique was used to achieve reduced-order model of the problem, minimizing computational cost. The PCMFS is a physics-based meshfree numerical technique for real-time simulation of surgical procedures where the approximation functions are applied directly on the strong form of the boundary value problem without the need for integration, increasing computational efficiency. Since computational speed has a significant role in simulation of surgical procedures, the proposed technique was able to model realistic nonlinear behavior of organs in real time. Numerical results are shown to demonstrate the effectiveness of the new methodology through a comparison between full and reduced analyses for several nonlinear problems. It is shown that the proposed technique was able to achieve good agreement with the full model; moreover, the computational and data storage costs were significantly reduced.
The present article aims to provide an overview of the consequences of dynamic soil-structure interaction (SSI) on building structures and the available modelling techniques to resolve SSI problems. The role of SSI has been traditionally considered beneficial to the response of structures. However, contemporary studies and evidence from past earthquakes showed detrimental effects of SSI in certain conditions. An overview of the related investigations and findings is presented and discussed in this article. Additionally, the main approaches to evaluate seismic soil-structure interaction problems with the commonly used modelling techniques and computational methods are highlighted. The strength, limitations, and application cases of each model are also discussed and compared. Moreover, the role of SSI in various design codes and global guidelines is summarized. Finally, the advancements and recent findings on the SSI effects on the seismic response of buildings with different structural systems and foundation types are presented. In addition, with the aim of helping new researchers to improve previous findings, the research gaps and future research tendencies in the SSI field are pointed out.
Building Information Modeling is a powerful tool for the design and for a consistent set of data in a virtual storage. For the application in the phases of realization and on site it needs further development. The paper describes main challenges and main features, which will help the development of software to better service the needs of construction site managers
The development of 3D technologies during the last decades in many different areas, leads us towards the complete 3D representation of planet earth on a high level of detail. On the lowest level we have geographical information systems (GIS) representing the outer layer of our planet as a 3D model. In the meantime these systems do not only give a geographical model but also present additional information like ownership, infrastructure and others that might be of interest for the construction business. In future these systems will serve as basis for virtual environments for planning and simulation of construction sites. In addition to this work is done on the integration of GIS systems with 3D city models in the area of urban planning and thus integration of different levels of detail. This article presents research work on the use of 3D models in construction on the next level of detail below the level of urban planning. The 3D city model is taken as basis for the 3D model of the construction site. In this virtual nD-world a contractor can organize and plan his resources, simulate different variants of construction processes and thus find out the most effective solution for the consideration of costs and time. On the basis of former researches the authors present a new approach for cost estimation and simulation using development technologies from game software.
The paper analyses the application of 3D gaming technologies in the simulation of processes associated with human resources and machinery on construction sites in order to determine process costs. It addresses the problem of detailing in process simulation. The authors outline special boundary conditions for the simulation of cost-relevant resource processes on virtual construction sites. The approach considers different needs for detailing in process simulation during the planning and building phase. For simulation of process costs on a construction site (contractors view) the level of detail has to be set to high. A prototype for determination of process durations (and hereby process costs) developed at the Bauhaus University Weimar is presented as a result of ongoing researches on detailing in process simulation. It shows the method of process cost determination on a high level of detail (game between excavator and truck) through interaction with the virtual environment of the site.
Der Einsatz von CAD-Applikationen hat die Planungsarbeit im Bauwesen entscheidend verändert. In der Entwurfsplanung sind die Änderungen bereits deutlich erkennbar. Seit der Anwendung von dreidimensionalen Planungswerkzeugen kann der Bauherr das Bauwerk in seiner virtuellen Gesamtheit am Computer betrachten und bewerten. Dies bietet viele Vorteile. So ist der Planer gezwungen alle wesentlichen Details a priori exakt zu planen, wodurch viele Fehler vermieden werden können. Dies bietet insbesondere für Planungen in Baubetrieben, z.B. im Rahmen der Arbeitsvorbereitung, neue Einsatzmöglichkeiten.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1996 in Weimar an der Bauhaus-Universität zum Thema: ‚Techno-Fiction. Zur Kritik der technologischen Utopien'
While Public-Private Partnership (PPP) is widely adopted across various sectors, it raises a question on its meagre utilisation in the housing sector. This paper, therefore, gauges the perspective of the stakeholders in the building industry towards the application of PPP in various building sectors together with housing. It assesses the performance reliability of PPP for housing by learning possible take-aways from other sectors. The role of key stakeholders in the industry becomes highly responsible for an informed understanding and decision-making. To this end, a two-tier investigation was conducted including surveys and expert interviews, with several stakeholders in the PPP industry in Europe, involving the public sector, private sector, consultants, as well as other community/user representatives.
The survey results demonstrated the success rate with PPPs, major factors important for PPPs such as profitability or end-user acceptability, the prevalent practices and trends in the PPP world, and the majority of support expressed in favour of the suitability of PPP for housing. The interviews added more detailed dimensions to the understanding of the PPP industry, its functioning and enabling the formation of a comprehensive outlook. The results present the perspective, approaches, and experiences of stakeholders over PPP practices, current trends and scenarios and their take on PPP in housing. It shall aid in understanding the challenges prevalent in the PPP approach for implementation in housing and enable the policymakers and industry stakeholders to make provisions for higher uptake to accelerate housing provision.
The spread of breathing air when playing wind instruments and singing was investigated and visualized using two methods: (1) schlieren imaging with a schlieren mirror and (2) background-oriented schlieren (BOS). These methods visualize airflow by visualizing density gradients in transparent media. The playing of professional woodwind and brass instrument players, as well as professional classical trained singers were investigated to estimate the spread distances of the breathing air. For a better comparison and consistent measurement series, a single high note, a single low note, and an extract of a musical piece were investigated. Additionally, anemometry was used to determine the velocity of the spreading breathing air and the extent to which it was quantifiable. The results showed that the ejected airflow from the examined instruments and singers did not exceed a spreading range of 1.2 m into the room. However, differences in the various instruments have to be considered to assess properly the spread of the breathing air. The findings discussed below help to estimate the risk of cross-infection for wind instrument players and singers and to develop efficacious safety precautions, which is essential during critical health periods such as the current COVID-19 pandemic.
This article focuses on further developments of the background-oriented schlieren (BOS) technique to visualize convective indoor air flow, which is usually defined by very small density gradients. Since the light rays deflect when passing through fluids with different densities, BOS can detect the resulting refractive index gradients as integration along a line of sight. In this paper, the BOS technique is used to yield a two-dimensional visualization of small density gradients. The novelty of the described method is the implementation of a highly sensitive BOS setup to visualize the ascending thermal plume from a heated thermal manikin with temperature differences of minimum 1 K. To guarantee steady boundary conditions, the thermal manikin was seated in a climate laboratory. For the experimental investigations, a high-resolution DLSR camera was used capturing a large field of view with sufficient detail accuracy. Several parameters such as various backgrounds, focal lengths, room air temperatures, and distances between the object of investigation, camera, and structured background were tested to find the most suitable parameters to visualize convective indoor air flow. Besides these measurements, this paper presents the analyzing method using cross-correlation algorithms and finally the results of visualizing the convective indoor air flow with BOS. The highly sensitive BOS setup presented in this article complements the commonly used invasive methods that highly influence weak air flows.
The synchronous distributed processing of common source code in the software development process is supported by well proven methods. The planning process has similarities with the software development process. However, there are no consistent and similarly successful methods for applications in construction projects. A new approach is proposed in this contribution.
Für eine Abschätzung des Heizwärmebedarfs von Gebäuden und Quartieren können thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Gebäudemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Bauplänen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Spätere bauliche Veränderungen des Gebäudes müssen häufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zusätzlich erhöht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einflüsse gegeben sind. Die Verknüpfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte überführbar. Mithilfe des Building Information Modeling (BIM) können Simulationsdaten sowohl konsistent gespeichert als auch über Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierfür wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten Übergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen ermöglicht. Dabei werden geometrische und physikalische Parameter direkt aus einem über den gesamten Lebenszyklus aktuellen Gebäudemodell extrahiert und an die Simulation übergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Gebäudemodellierung und nach späteren baulichen Veränderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollständige Übertragbarkeit der Eingangs- und Ausgangswerte sicher.
Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products. By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data.
Für eine Abschätzung des Heizwärmebedarfs von Gebäuden und Quartieren können thermisch-energetische Simulationen eingesetzt werden. Grundlage dieser Simulationen sind geometrische und physikalische Gebäudemodelle. Die Erstellung des geometrischen Modells erfolgt in der Regel auf Basis von Bauplänen oder Vor-Ort-Begehungen, was mit einem großen Recherche- und Modellierungsaufwand verbunden ist. Spätere bauliche Veränderungen des Gebäudes müssen häufig manuell in das Modell eingearbeitet werden, was den Arbeitsaufwand zusätzlich erhöht. Das physikalische Modell stellt die Menge an Parametern und Randbedingungen dar, welche durch Materialeigenschaften, Lage und Umgebungs-einflüsse gegeben sind. Die Verknüpfung beider Modelle wird innerhalb der entsprechenden Simulations-software realisiert und ist meist nicht in andere Softwareprodukte überführbar.
Mithilfe des Building Information Modeling (BIM) können Simulationsdaten sowohl konsistent gespeichert als auch über Schnittstellen mit entsprechenden Anwendungen ausgetauscht werden. Hierfür wird eine Methode vorgestellt, die thermisch-energetische Simulationen auf Basis des standardisierten Übergabe-formats Industry Foundation Classes (IFC) inklusive anschließender Auswertungen ermöglicht. Dabei werden geometrische und physikalische Parameter direkt aus einem über den gesamten Lebenszyklus aktuellen Gebäudemodell extrahiert und an die Simulation übergeben. Dies beschleunigt den Simulations-prozess hinsichtlich der Gebäudemodellierung und nach späteren baulichen Veränderungen. Die erarbeite-te Methode beruht hierbei auf einfachen Modellierungskonventionen bei der Erstellung des Bauwerksinformationsmodells und stellt eine vollständige Übertragbarkeit der Eingangs- und Ausgangswerte sicher.
Thermal building simulation based on BIM-models. Thermal energetic simulations are used for the estimation of the heating demand of buildings and districts. These simulations are based on building models containing geometrical and physical information. The creation of geometrical models is usually based on existing construction plans or in situ assessments which demand a comparatively big effort of investigation and modeling. Alterations, which are later applied to the structure, request manual changes of the related model, which increases the effort additionally. The physical model represents the total amount of parameters and boundary conditions that are influenced by material properties, location and environmental influences on the building. The link between both models is realized within the correspondent simulation soft-ware and is usually not transferable to other software products.
By Applying Building Information Modeling (BIM) simulation data is stored consistently and an exchange to other software is enabled. Therefore, a method which allows a thermal energetic simulation based on the exchange format Industry Foundation Classes (IFC) including an evaluation is presented. All geometrical and physical information are extracted directly from the building model that is kept up-to-date during its life cycle and transferred to the simulation. This accelerates the simulation process regarding the geometrical modeling and adjustments after later changes of the building. The developed method is based on simple conventions for the creation of the building model and ensures a complete transfer of all simulation data.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer'
Authors' own research in applied unicriterial and multicriterial optimisation of bar structures, and also an analysis of accessible bibliography on structural synthesis allows to present herein an attempt to define a general algorithm for proceeding in formulation of a structural optimisation problem. A practical aspect of such an algorithm consists, in author's opinion, in enabling a designer a correct creation of a mathematical model of synthesis problems, independently of known mathematical methods employed to looking for an unconditional extremum of function of several variables. A proposed algorithm is not a ready-for-use tool for solving all the optimisation problems, but it constitutes an easy-to-expand theoretical basis. This basis should allow a designer to create a proper set of compromises on the way to construct a mathematical model of a specific optimisation problem. The algorithm, presented in the paper, is constructed as a sequence of the one-after-another problem questions, on which the designer answers: yes or no, and a set of selections from the knowledge base consisting of the elements of an optimisation problem components. The order of making questions adopted by the authors in the algorithm is subjective, however it is supported by their experience, both in applied optimisation and in designing of structures like trusses or frames.
Die Planungsforschung hat sich spätestens seit der „kommunikativen Wende“ intensiv damit beschäftigt, wie mit Konflikten umgegangen werden soll und wird. Ansätze der „agonistischen“ Planungstheorie widersprechen der normativen Prämisse, Konsensbildung unter den Planungsbeteiligten anzustreben. Vielmehr wollen sie widerstreitende Positionen normativ für die räumliche Entwicklung fruchtbar machen. Zugleich betonen sie eine vermeintliche Dualität von Planung und Protest, die in der neueren Protesttheorie infrage gestellt wird. Dieser Beitrag zeigt aufbauend auf einer Diskussion von planungs- und protesttheoretischen Ansätzen und einer empirischen Analyse planungsbezogener Proteste in Deutschland, dass diese Proteste von den Planungsakteuren zwar immer stärker als „Normalität“ aufgefasst werden und antagonistische Partizipation trotz zunehmender Konflikthaftigkeit und vermeintlicher Infragestellung der repräsentativen Demokratie kulturell regelgebunden bleibt. Protesthandeln ist Teil ausdifferenzierter „Partizipationsbündel“, die situationsbezogen auch Teilnahme an Beteiligungsverfahren, direktdemokratische Verfahren und Klagen umfassen. Protestierende verfolgen dabei meist eine eher reformorientierte Agenda, die keiner „Zähmung“ bedarf. Allerdings können die zugrunde liegenden Konflikte häufig gar nicht „gelöst“ werden. Planenden hingegen können auch innerhalb eines agonistischen Planungsumfelds rationalistische und deliberative Ansätze zur Verfügung stehen, die sie situationsbezogen und strategisch nutzen.
Urban planners are often challenged with the task of developing design solutions which must meet multiple, and often contradictory, criteria. In this paper, we investigated the trade-offs between social, psychological, and energy potential of the fundamental elements of urban form: the street network and the building massing. Since formal mehods to evaluate urban form from the psychological and social point of view are not readily available, we developed a methodological framework to quantify these criteria as the first contribution in this paper. To evaluate the psychological potential, we conducted a three-tiered empirical study starting from real world environments and then abstracting them to virtual environments. In each context, the implicit (physiological) response and explicit (subjective) response of pedestrians were measured. To quantify the social potential, we developed a street network centrality-based measure of social accessibility.
For the energy potential, we created an energy model to analyze the impact of pure geometric form on the energy demand of the building stock. The second contribution of this work is a method to identify distinct clusters of urban form and, for each, explore the trade-offs between the select design criteria. We applied this method to two case studies identifying nine types of urban form and their respective potential trade-offs, which are directly applicable for the assessment of strategic decisions regarding urban form during the early planning stages.
Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computergenerated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination – opening new possibilities for TV studios.
Superimposing Dynamic Range
(2009)
Replacing a uniform illumination by a high-frequent illumination enhances the contrast of observed and captured images. We modulate spatially and temporally multiplexed (projected) light with reflective or transmissive matter to achieve high dynamic range visualizations of radiological images on printed paper or ePaper, and to boost the optical contrast of images viewed or imaged with light microscopes.
Der Text folgt in essayistischer Form einem Spaziergang durch das politische Zentrum Brasílias in Brasilien. Die Konzentration liegt auf der Gestaltung des Bodens. Wie ist die Planhauptstadt „vom Reißbrett“ in der Horizontalen gestaltet? Wie sehen repräsentative Plätze einer Stadt aus, die vor allem für Autos gebaut worden ist? Der forschende Blick liegt auf dem erlebten Ist-Zustand und wird assoziativ mit Ergebnissen der Forschungsarbeit aus Deutschland reflektiert. „Mächtiger Boden“ entstand als Satellit zur aktuellen Forschung der Autorin im Rahmen eines Aufenthalts in Brasilien.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer'
Elitenkritik, populare Bündnisse und inklusive Solidaritär. Interview zur Debatte um Linkspopulismus
(2018)
In der aktuellen ökonomischen und politischen Krise haben Debatten um linke Strategien wieder Hochkonjunktur. Besonders kontrovers werden Vorschläge diskutiert, die einen Linkspopulismus als Alternative zum rechten politischen Projekt, zum Neoliberalismus und als Transformationsstrategie hin zu einer sozialistischen Gesellschaft propagieren. Thomas Goes und Violetta Bock haben mit ihrem Buch Ein unanständiges Angebot? Mit linkem Populismus gegen Eliten und Rechte (2017) eine programmatische Aufarbeitung existierender linker Populismuskonzepte und ihre eigene Vorstellung davon, wie ein linker Populismus gelingen kann, vorgelegt. Damit haben sie die Debatte um Linkspopulismus in Deutschland befeuert. Im Interview werden sie nach ihren Positionen und den Kontroversen um das Buch befragt. Das Interview soll als Aufschlag für eine Debatte dienen. Antworten zu den dargestellten Positionen und Bezüge zu städtischen Themen und städtischen sozialen Bewegungen sind sehr willkommen.
Beyond metropolitan areas, many peripheral regions and their cities in Europe have, in manifold ways, been significantly shaped by industrialisation. In the context of the relocation of industrial production to other countries over the last decades, the question has been raised as to the role this heritage can play in futural regional development as well as the potential local identification with this history. Hence, this article seeks to analyse the perception of the industrial heritage in the Vogtland region, located alongside the border of three German federal states and the Czech Republic. It inquires as to the perception of the industrial heritage by the local population and related potential future narrations. Based on spontaneous and explorative interviews with local people as an empirical base, a discrepancy between the perception of the tangible and intangible dimensions of the industrial heritage can be observed. On the one hand, the tangible heritage like older factories and production complexes are seen as a functional legacy and an “eyesore” narrative is attributed to them. On the other hand, people often reference the personal and familial connection to the industry and highlight its importance for the historical development and the wealth of the region. But these positive associations are mainly limited to the intangible dimension and are disconnected from the material artefacts of industrial production.
Broadband electromagnetic frequency or time domain sensor techniques present high potential for quantitative water content monitoring in porous media. Prior to in situ application, the impact of the relationship between the broadband electromagnetic properties of the porous material (clay-rock) and the water content on the frequency or time domain sensor response is required. For this purpose, dielectric properties of intact clay rock samples experimental determined in the frequency range from 1 MHz to 10 GHz were used as input data in 3-D numerical frequency domain finite element field calculations to model the one port broadband frequency or time domain transfer function for a three rods based sensor embedded in the clay-rock. The sensor response in terms of the reflection factor was analyzed in time domain with classical travel time analysis in combination with an empirical model according to Topp equation, as well as the theoretical Lichtenecker and Rother model (LRM) to estimate the volumetric water content. The mixture equation considering the appropriate porosity of the investigated material provide a practical and efficient approach for water content estimation based on classical travel time analysis with the onset-method. The inflection method is not recommended for water content estimation in electrical dispersive and absorptive material. Moreover, the results clearly indicate that effects due to coupling of the sensor to the material cannot be neglected. Coupling problems caused by an air gap lead to dramatic effects on water content estimation, even for submillimeter gaps. Thus, the quantitative determination of the in situ water content requires careful sensor installation in order to reach a perfect probe clay rock coupling.
Urban and building energy simulation models are usually driven by typical meteorological year (TMY) weather data often in a TMY2 or EPW format. However, the locations where these historical datasets were collected (usually airports) generally do not represent the local, site specific micro-climates that cities develop. In this paper, a humid sub-tropical climate context has been considered. An idealised “urban unit model” of 250 m radius is being presented as a method of adapting commonly available weather data files to the local micro-climate. This idealised “urban unit model” is based on the main thermal and morphological characteristics of nine sites with residential/institutional (university) use in Hangzhou, China. The area of the urban unit was determined by the region of influence on the air temperature signal at the centre of the unit. Air temperature and relative humidity were monitored and the characteristics of the surroundings assessed (eg green-space, blue-space, built form). The “urban unit model” was then implemented into micro-climatic simulations using a Computational Fluid Dynamics – Surface Energy Balance analysis tool (ENVI-met, Version 4). The “urban unit model” approach used here in the simulations delivered results with performance evaluation indices comparable to previously published work (for air temperature; RMSE <1, index of agreement d > 0.9). The micro-climatic simulation results were then used to adapt the air temperature and relative humidity of the TMY file for Hangzhou to represent the local, site specific morphology under three different weather forcing cases, (ie cloudy/rainy weather (Group 1), clear sky, average weather conditions (Group 2) and clear sky, hot weather (Group 3)). Following model validation, two scenarios (domestic and non-domestic building use) were developed to assess building heating and cooling loads against the business as usual case of using typical meteorological year data files. The final “urban weather projections” obtained from the simulations with the “urban unit model” were used to compare the degree days amongst the reference TMY file, the TMY file with a bulk UHI offset and the TMY file adapted for the site-specific micro-climate (TMY-UWP). The comparison shows that Heating Degree Days (HDD) of the TMY file (1598 days) decreased by 6 % in the “TMY + UHI” case and 13 % in the “TMY-UWP” case showing that the local specific micro-climate is attributed with an additional 7 % (ie from 6 to 13 %) reduction in relation to the bulk UHI effect in the city. The Cooling Degree Days (CDD) from the “TMY + UHI” file are 17 % more than the reference TMY (207 days) and the use of the “TMY-UWP” file results to an additional 14 % increase in comparison with the “TMY + UHI” file (ie from 17 to 31 %). This difference between the TMY-UWP and the TMY + UHI files is a reflection of the thermal characteristics of the specific urban morphology of the studied sites compared to the wider city. A dynamic thermal simulation tool (TRNSYS) was used to calculate the heating and cooling load demand change in a domestic and a non-domestic building scenario. The heating and cooling loads calculated with the adapted TMY-UWP file show that in both scenarios there is an increase by approximately 20 % of the cooling load and a 20 % decrease of the heating load. If typical COP values for a reversible air-conditioning system are 2.0 for heating and 3.5 for cooling then the total electricity consumption estimated with the use of the “urbanised” TMY-UWP file will be decreased by 11 % in comparison with the “business as usual” (ie reference TMY) case. Overall, it was found that the proposed method is appropriate for urban and building energy performance simulations in humid sub-tropical climate cities such as Hangzhou, addressing some of the shortfalls of current simulation weather data sets such as the TMY.
Wissenschaftliches Kolloquium vom 27. bis 30. Juni 1989 in Weimar an der Hochschule für Architektur und Bauwesen zum Thema: ‚Produktivkraftentwicklung und Umweltgestaltung. Sozialer und wissenschaftlich-technischer Fortschritt in ihren Auswirkungen auf Architektur und industrielle Formgestaltung in unserer Zeit. Zum 100. Geburtstag von Hannes Meyer'
Gentrification und Kultur
(1993)
Auguste Rodins Weimarer Eva
(2018)
Wissenschaftliches Kolloquium vom 19. bis 22. April 2007 in Weimar an der Bauhaus-Universität zum Thema: ‚Die Realität des Imaginären. Architektur und das digitale Bild'
In this work different fibre optic sensors for the structural health monitoring of civil engineering structures are reported. A fibre optic crack sensor and two different fibre optic moisture sensors have been designed to detect the moisture ingress in concrete based building structures. Moreover, the degeneration of the mechanical properties of optical glass fibre sensors and hence their long-term stability and reliability due to the mechanical and chemical impact of the concrete environment is discussed as well as the advantage of applying a fibre optic sensor system for the structural health monitoring of sewerage tunnels is demonstrated.
Im Rahmen eines Vortrags wurde ein begrenzter Bereich ausgewählt, an dessen Entstehung alle fünf Disziplinen, die "la Grande Roma di Mussolini" gestalteten, gleichermaßen Anteil haben. Der Städtebau - wie er bis zum 2. Weltkrieg praktiziert wurde -, die Architektur, die bildenden Künste, die Denkmalpflege und vor allem die Archäologie in einer bis dahin unbekannten Vorreiterrolle. ...
This paper addresses the scope for action by municipalities in a climate emergency and places it in the framework of ecomodern (urban) policy. We analyse the way in which two German ‘climate emergency municipalities’ translate conflicts of post-fossil transformation into concrete political and planning strategies. Although more than 2,200 authorities around the world have already declared a climate emergency, research on the impact of these resolutions on the political orientation of municipalities is very limited. Our research focus is on the (potentially agonistic) treatment of conflicts in planning. We argue that in times of a socio-ecological crisis, success in conflict resolution cannot refer to appeasement and depoliticisation. Instead, we propose a framework of five criteria, based on critical theory on ecomodern strategies, planning processes and degrowth. Thus, this practice-related and explorative paper connects empirical insights from the German cities of Constance and Berlin with an innovative normative framework. The findings tell a complex story of an, at least partial, admission of the failure of previous climate mitigation strategies, a lack of social institutions of limits, an instrumental relation to nature and a disregard for social injustices. The paper discusses how municipalities, in the context of ongoing tensions over the post-fossil transformation in Germany, on the one hand hold on to business-as-usual approaches, but on the other hand also set political impulses for change.
Die derzeitige Wohnungskrise hat eine sozial-ökologische Kernproblematik. Dabei ist die sozial ungerechte und ökologisch problematische Verteilung von Wohnfläche meist unsichtbar und wird weder in wissenschaftlichen noch in aktivistischen Kontexten ausreichend als Frage der Flächengerechtigkeit problematisiert. Denn Wohnraum und Fläche in einer Stadt sind keine endlos verfügbaren Güter: Wenn einige Menschen auf viel Raum leben, bleibt für andere Menschen weniger Fläche übrig. Und die Menschen, die am wenigstens für eine Verknappung von Wohnraum verantwortlich sind, leiden am meisten darunter. Dieser Artikel arbeitet zunächst den Begriff der Wohnflächengerechtigkeit heraus, wobei auf die Ungleichverteilung von Wohnfläche und deren gesellschaftliche Implikationen unter derzeitigen Wohnungsverteilungsmechanismen Bezug genommen wird. Anschließend wird der Verbrauch von (Wohn-)Fläche aus ökologischer Perspektive problematisiert. Der Artikel diskutiert scheinbare und transformationsorientierte Lösungs- und Handlungsansätze. Abschließend fordert er in der kritischen Stadtforschung und in aktivistischen Kontexten eine stärkere Debatte um eine Wohnflächengerechtigkeit, deren Verwirklichung gleichermaßen eine soziale wie ökologische Dimension hat.
We present a novel image classification technique for detecting multiple objects (called subobjects) in a single image. In addition to image classifiers, we apply spatial relationships among the subobjects to verify and to predict locations of detected and undetected subobjects, respectively. By continuously refining the spatial relationships throughout the detection process, even locations of completely occluded exhibits can be determined. Finally, all detected subobjects are labeled and the user can select the object of interest for retrieving corresponding multimedia information. This approach is applied in the context of PhoneGuide, an adaptive museum guidance system for camera-equipped mobile phones. We show that the recognition of subobjects using spatial relationships is up to 68% faster than related approaches without spatial relationships. Results of a field experiment in a local museum illustrate that unexperienced users reach an average recognition rate for subobjects of 85.6% under realistic conditions.
In this paper, we present a novel technique for adapting local image classifiers that are applied for object recognition on mobile phones through ad-hoc network communication between the devices. By continuously accumulating and exchanging collected user feedback among devices that are located within signal range, we show that our approach improves the overall classification rate and adapts to dynamic changes quickly. This technique is applied in the context of PhoneGuide – a mobile phone based museum guidance framework that combines pervasive tracking and local object recognition for identifying a large number of objects in uncontrolled museum environments.
SLang - the Structural Language : Solving Nonlinear and Stochastic Problems in Structural Mechanics
(1997)
Recent developments in structural mechanics indicate an increasing need of numerical methods to deal with stochasticity. This process started with the modeling of loading uncertainties. More recently, also system uncertainty, such as physical or geometrical imperfections are modeled in probabilistic terms. Clearly, this task requires close connenction of structural modeling with probabilistic modeling. Nonlinear effects are essential for a realistic description of the structural behavior. Since modern structural analysis relies quite heavily on the Finite Element Method, it seems to be quite reasonable to base stochastic structural analysis on this method. Commercially available software packages can cover deterministic structural analysis in a very wide range. However, the applicability of these packages to stochastic problems is rather limited. On the other hand, there is a number of highly specialized programs for probabilistic or reliability problems which can be used only in connection with rather simplistic structural models. In principle, there is the possibility to combine both kinds of software in order to achieve the goal. The major difficulty which then arises in practical computation is to define the most suitable way of transferring data between the programs. In order to circumvent these problems, the software package SLang (Structural Language) has been developed. SLang is a command interpreter which acts on a set of relatively complex commands. Each command takes input from and gives output to simple data structures (data objects), such as vectors and matrices. All commands communicate via these data objects which are stored in memory or on disk. The paper will show applications to structural engineering problems, in particular failure analysis of frames and shell structures with random loads and random imperfections. Both geometrical and physical nonlinearities are taken into account.
A broadband soil dielectric spectra retrieval approach ( 1 MHz– 2 GHz) has been implemented for a layered half space. The inversion kernel consists of a two-port transmission line forward model in the frequency domain and a constitutive material equation based on a power law soil mixture rule (Complex Refractive Index Model - CRIM). The spatially-distributed retrieval of broadband dielectric spectra was achieved with a global optimization approach based on a Shuffled Complex Evolution (SCE) algorithm using the full set of the scattering parameters. For each layer, the broadband dielectric spectra were retrieved with the corresponding parameters thickness, porosity, water saturation and electrical conductivity of the aqueous pore solution. For the validation of the approach, a coaxial transmission line cell measured with a network analyzer was used. The possibilities and limitations of the inverse parameter estimation were numerically analyzed in four scenarios. Expected and retrieved layer thicknesses, soil properties and broadband dielectric spectra in each scenario were in reasonable agreement. Hence, the model is suitable for an estimation of in-homogeneous material parameter distributions. Moreover, the proposed frequency domain approach allows an automatic adaptation of layer number and thickness or regular grids in time and/or space.
This paper proposes a practice-theoretical journalism research approach for an alternate and innovative perspective of digital journalism’s current empirical challenges. The practice-theoretical approach is introduced by demonstrating its explanatory power in relation to demarcation problems, technological changes, economic challenges and challenges to journalism’s legitimacy. Its respective advantages in dealing with these problems are explained and then compared to established journalism theories. The particular relevance of the theoretical perspective is due to (1) its central decision to observe journalistic practices, (2) the transgression of conventional journalistic boundaries, (3) the denaturalization of journalistic norms and laws, (4) the explicit consideration of a material, socio-technical dimension of journalism, (5) a focus on the conflicting relationship between journalistic practices and media management practices, and (6) prioritizing order generation over stability.
Why Do Digital Native News Media Fail? An Investigation of Failure in the Early Start-Up Phase
(2020)
Digital native news media have great potential for improving journalism. Theoretically, they can be the sites where new products, novel revenue streams and alternative ways of organizing digital journalism are discovered, tested, and advanced. In practice, however, the situation appears to be more complicated. Besides the normal pressures facing new businesses, entrepreneurs in digital news are faced with specific challenges. Against the background of general and journalism specific entrepreneurship literature, and in light of a practice–theoretical approach, this qualitative case study research on 15 German digital native news media outlets empirically investigates what barriers curb their innovative capacity in the early start-up phase. In the new media organizations under study here, there are—among other problems—a high degree of homogeneity within founding teams, tensions between journalistic and economic practices, insufficient user orientation, as well as a tendency for organizations to be underfinanced. The patterns of failure investigated in this study can raise awareness, help news start-ups avoid common mistakes before actually entering the market, and help industry experts and investors to realistically estimate the potential of new ventures within the digital news industry.
Entrepreneurship and start-up activities are seen as a key response to recent upheavals in the media industry: Newly founded ventures can act as important drivers for industry transformation and renewal, pioneering new products, business models, and organizational designs (e.g. Achtenhagen, 2017; Buschow & Laugemann, 2020).
In principle, media students represent a crucial population of nascent entrepreneurs: individuals who will likely become founders of start-ups (Casero-Ripollés et al., 2016). However, their willingness to start a new business is generally considered to be rather low (Goyanes, 2015), and for journalism students, the idea of innovation tends to be conservative, following traditional norms and professional standards (Singer & Broersma, 2020). In a sample of Spanish journalism students, López-Meri et al. (2020) found that one of the main barriers to entrepreneurial intentions is that students feel they lack knowledge and training in entrepreneurship.
In the last 10 years, a wide variety of entrepreneurship education courses have been set up in media departments of colleges and universities worldwide.
These programs have been designed to sensitize and prepare communications, media and journalism students to think and act entrepreneurially (e.g. Caplan et al., 2020; Ferrier, 2013; Ferrier & Mays, 2017; Hunter & Nel, 2011). Entrepreneurial competencies
and practices not only play a crucial role for start-ups, but, in imes of digital transformation, are increasingly sought after by legacy media companies as well (Küng, 2015).
At the Department of Journalism and Communication Research, Hanover University of Music, Drama and Media, Germany, we have been addressing these developments with the “Media Entrepreneurship” program. The course, established in 2013, aims to provide fundamental knowledge of entrepreneurship, as well as promoting students‘ entrepreneurial thinking and behavior. This article presents the pedagogical approach of the program and investigates learning outcomes. By outlining and evaluating the Media Entrepreneurship program, this article aims to promote good practices of entrepreneurship education in communications, media and journalism, and to reflect on the limitations of such programs.
In the wake of the news industry’s digitization, novel organizations that differ considerably from traditional media firms in terms of their functional roles and organizational practices of media work are emerging. One new type is the field repair organization, which is characterized by supporting high‐quality media work to compensate for the deficits (such as those which come from cost savings and layoffs) which have become apparent in legacy media today. From a practice‐theoretical research perspective and based on semi‐structured interviews, virtual field observations, and document analysis, we have conducted a single case study on Science Media Center Germany (SMC), a unique non‐profit news start‐up launched in 2016 in Cologne, Germany. Our findings show that, in addition to field repair activities, SMC aims to facilitate progress and innovation in the field, which we refer to as field advancement. This helps to uncover emerging needs and anticipates problems before they intensify or even occur, proactively providing products and tools for future journalism. This article contributes to our understanding of novel media organizations with distinct functions in the news industry, allowing for advancements in theory on media work and the organization of journalism in times of digital upheaval.