620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Refine
Document Type
- Doctoral Thesis (132) (remove)
Institute
- Institut für Strukturmechanik (ISM) (13)
- Professur Allgemeine Baustoffkunde (9)
- Professur Holz- und Mauerwerksbau (9)
- Professur Massivbau I (9)
- Professur Baumechanik (8)
- Professur Informatik im Bauwesen (8)
- F. A. Finger-Institut für Baustoffkunde (FIB) (7)
- Professur Baubetrieb und Bauverfahren (6)
- Professur Bauchemie und Polymere Werkstoffe (5)
- Professur Grundbau (5)
Keywords
- Beton (11)
- Optimierung (9)
- Finite-Elemente-Methode (8)
- Modellierung (8)
- Tragverhalten (7)
- Hydratation (5)
- Kriechen (5)
- Mikrostruktur (5)
- Stahlbeton (5)
- Bemessung (4)
- Deformationsverhalten (4)
- Dynamik (4)
- Holzbau (4)
- Mathematisches Modell (4)
- Planungsprozess (4)
- Porenbeton (4)
- Simulation (4)
- Stabilität (4)
- Stahlbetonkonstruktion (4)
- concrete (4)
- Alkali-Kieselsäure-Reaktion (3)
- BIM (3)
- Bauwerk (3)
- Bauwesen (3)
- Dynamische Belastung (3)
- Entwurf (3)
- Gips (3)
- IFC (3)
- Informationsmodell (3)
- Kooperation (3)
- Kunstharzmodifizierter Zementbeton (3)
- Kunststoffmörtel (3)
- Langzeitverhalten (3)
- Mauerwerk (3)
- Mikroskopie (3)
- Nichtlineare Finite-Elemente-Methode (3)
- Objektorientierung (3)
- Schwinden (3)
- Stahlbau (3)
- Stahlbetonbauteil (3)
- Strukturdynamik (3)
- Systemidentifikation (3)
- Tragfähigkeit (3)
- Tragwerk (3)
- Verbundbauweise (3)
- Versionsverwaltung (3)
- Waste (3)
- Zement (3)
- Zuverlässigkeit (3)
- finite element method (3)
- microstructure (3)
- system identification (3)
- Alkalisulfate (2)
- Animation (2)
- Baubetrieb (2)
- Bauplanung (2)
- Bauwerkslebenszyklus (2)
- Berechnung (2)
- Betonzusatzmittel (2)
- Bruchmechanik (2)
- Bruchverhalten (2)
- Building Information Model (2)
- Computer Supported Cooperative Work (2)
- Computersimulation (2)
- Concrete (2)
- Creep (2)
- Dauerhaftigkeit (2)
- Diskontinuumsmechanik (2)
- Eigenspannung (2)
- Elastizitätsmodul (2)
- Energiedissipation (2)
- Erdbeben (2)
- Experiment (2)
- Extremalprinzip (2)
- Fließmittel (2)
- Geschwindigkeitsverteilung (2)
- Großtafelbau (2)
- HBV (2)
- Holz (2)
- Holz-Beton-Verbund (2)
- Hybridbauweise (2)
- Imperfektion (2)
- Informationssystem (2)
- Isogeometrische Analyse (2)
- Keramik (2)
- Kontinuumsmechanik (2)
- Kunststoffadditiv (2)
- Langzeittragverhalten (2)
- Linearelastische Bruchmechanik (2)
- Mehrphasensystem (2)
- Mehrskalenanalyse (2)
- Mehrskalenmodell (2)
- Modell (2)
- Modellbildung (2)
- Mörtel (2)
- NURBS (2)
- Nichtlineare Mechanik (2)
- Nichtlineare Optimierung (2)
- Numerische Mathematik (2)
- Oberflächenbeschreibung (2)
- Oberflächenstruktur (2)
- Porosität (2)
- Quelldruck (2)
- Rauheitsparameter (2)
- Rauigkeit (2)
- Recycling (2)
- Rissbildung (2)
- Sanierung (2)
- Schale (2)
- Scheduling (2)
- Schubbewehrung (2)
- Schubtragfähigkeit (2)
- Stochastik (2)
- Straßenquerschnitt (2)
- Straßenverkehr (2)
- Strömungswiderstand (2)
- Terminplanung (2)
- Tomographie (2)
- Ultraschall (2)
- Verbund (2)
- Verteiltes System (2)
- Wirkungsmechanismen (2)
- Wärmebehandlung (2)
- Zementbeton (2)
- Zementstein (2)
- Zerstörungsfreie Werkstoffprüfung (2)
- Zuverlässigkeitstheorie (2)
- bond (2)
- building life cycle (2)
- cement (2)
- continuum mechanics (2)
- cooperation (2)
- cracking (2)
- design (2)
- durability (2)
- dynamics (2)
- earthquake (2)
- fatigue (2)
- mathematical programming (2)
- modelling (2)
- optimization (2)
- reinforced concrete (2)
- shrinkage (2)
- simulation (2)
- timber-concrete composite (2)
- velocity distribution (2)
- versioning (2)
- 2+1-roads (1)
- 40 °C Nebelkammer (1)
- 4D (1)
- 4D-Simulation (1)
- 5 (1)
- 56.81 (1)
- 60 °C-Betonversuch über Wasser (1)
- ASR (1)
- Abaqus (1)
- Abbinderegler (1)
- Abfall (1)
- Abfallwirtschaftsplan (1)
- Abfälle (1)
- Ablauf (1)
- Abstandsmessung (1)
- Adaptives Verfahren (1)
- Adaptivität (1)
- Adhäsion (1)
- Aktive Integration (1)
- Algen (1)
- Alkali-Carbonat-Reaktion (1)
- Alkali-Kieselsäure-Gel (1)
- Alkali-silica reaction (1)
- Alkalilösliche Kieselsäure (1)
- Alkalisulfat (1)
- Altbaumodernisierung (1)
- Alterungsbeständigkeit (1)
- Anomale Dispersion (1)
- Anorganische Salze (1)
- Antwortflächenverfahren (1)
- Arbeitsschutz (1)
- Arbeitsunfall (1)
- Architecture (1)
- Aridisierung (1)
- Asbestbelastung (1)
- Asbestsanierung (1)
- Aufkohlung <Metallurgie> (1)
- Aufwindkraftwerk (1)
- Ausbreitung (1)
- Ausbreitungsvorgänge (1)
- Auslaugung (1)
- Aussteifungssystem (1)
- Ausziehversuch (1)
- Autobahn (1)
- Autobahnarbeitsstellen (1)
- Autoclaved Aerated Concrete (1)
- Autoclaved Aerated Conrete (1)
- Autofrettage (1)
- Autogenous (1)
- Autokorrelationslänge (1)
- Autonomous (1)
- Außenwand (1)
- B-Spline (1)
- B-Spline Finite Elemente (1)
- B-spline (1)
- BOT projects (1)
- BSCF (1)
- Bauablauf (1)
- Bauablaufplan (1)
- Bauarbeit (1)
- Bauauftragsrechnung (1)
- Bauausführung (1)
- Bauchemie (1)
- Baudenkmal (1)
- Bauen im Bestand (1)
- Bauentwurf (1)
- Baugrundmodell (1)
- Baugrundverbesserung (1)
- Baukonstruktion (1)
- Bauleistungsfeststellung (1)
- Baumangel (1)
- Bauphysik (1)
- Bauschaden (1)
- Bausoll (1)
- Baustelle (1)
- Baustoff (1)
- Bauteil (1)
- Bauwerksinformationsmodell (1)
- Bauwerksmodell (1)
- Bauwerksmodellierung (1)
- Bayes neuronale Netze (1)
- Bayes-Entscheidungstheorie (1)
- Bayes-Inferenz (1)
- Bayesian model updating (1)
- Bayesian neural networks (1)
- Bayesische Modelaktualisierung (1)
- Bearbeitung von Ingenieuraufgaben (1)
- Behelfsverkehrsführungen (1)
- Behälter (1)
- Belastungsversuch (1)
- Belüftung (1)
- Bemessungsverfahren (1)
- Bentonit-Sand (1)
- Bentonite-sand (1)
- Benut (1)
- Benutzeroberfläche (1)
- Berechnungsverfahren (1)
- Berührungsfläche (1)
- Beschichtung (1)
- Beschleuniger (1)
- Beschädigung (1)
- Bestandsmaßnahmen (1)
- Betonbau (1)
- Betonschaden (1)
- Betonsteinherstellung (1)
- Betonverarbeitung (1)
- Betonverflüssiger (1)
- Betonzusatz (1)
- Betonzuschlag (1)
- Beulung (1)
- Bewertung (1)
- Bewertungsmethode (1)
- Bimomente (1)
- Bindemittel-Boden-Säulen (1)
- Blasenschleier (1)
- Bleilochtalsperre (1)
- Boden (1)
- Bodenaggressivität (1)
- Bodenfilter (1)
- Bodenunruhe (1)
- Bodenverbesserung <Bauwesen> (1)
- Brettschichtholz (1)
- Brettstapel (1)
- Brettstapelbau (1)
- Bruchkriterien (1)
- Bruchzähigkeit (1)
- Brücke (1)
- Brückenbau (1)
- Building Information Modeling (1)
- Building Modelling (1)
- C-S-H Phasen (1)
- C-S-H phases (1)
- CAD (1)
- CAD-Systems (1)
- CAO (1)
- CDF-Verfahren (1)
- CFD (1)
- CFRP (1)
- COM (1)
- CSCW (1)
- CSMF (1)
- Calciumsulfat (1)
- Calciumsulfat-Halbhydrat (1)
- Calciumsulfatbindemittel (1)
- Cluster-Analyse (1)
- Co-operative Work (1)
- Computer aided architectural design (1)
- Computer model (1)
- Computer science (1)
- Computermodul (1)
- Construction Product data (1)
- Constructive Design (1)
- Constructive Optimisation (1)
- Continuous-Time Markov Chain (1)
- Controlling (1)
- Cost-Benefit Analysis (1)
- Coupled models (1)
- Customizing (1)
- Cylinder-Axle-Model (1)
- Damage (1)
- Datenaustausch (1)
- Datenmodell (1)
- Dauerfestigk (1)
- Dauerstandfestigkeit (1)
- Deep Soil Stabilization (1)
- Deformation (1)
- Deformationsmessung (1)
- Dehnwellenresonanz (1)
- Delamination (1)
- Deponiebau (1)
- Design (1)
- Destratifikation (1)
- Developing countries (1)
- Direkte numerische Simul (1)
- Direkte numerische Simulation (1)
- Diskrete-Elemente-Methode (1)
- Dispersion <Welle> (1)
- Distributed computing (1)
- Domain Models (1)
- Domänenmodelle (1)
- Drehrohr (1)
- Dreidimensionale Comp (1)
- Dreistreifige Landstraße (1)
- Durchströmung (1)
- Dynamic Model Management Systems (1)
- Dynamic Schema Evolution (1)
- Dynamische Messungen (1)
- Dynamische Modellverwaltungssysteme (1)
- Dynamische Schemaevolution (1)
- Dübelleiste (1)
- E-Modul (1)
- E-modulus (1)
- Ebener Dehnungszustand (1)
- Editor (1)
- Einsatzhärten (1)
- Einzellast (1)
- Energiemethoden (1)
- Energietransport (1)
- Energieübertragung (1)
- Energy-dissipation (1)
- Enteisungsanlage (1)
- Entity-Relationship-Datenmodell (1)
- Entscheidungshilfemodell (1)
- Entscheidungsträger (1)
- Entwicklungsländer (1)
- Environment (1)
- Epizentrendichte (1)
- Erdbebenbelastung (1)
- Erdbebengefährdung (1)
- Erdbebenschaden (1)
- Ereignisgesteuerte Prozeßkette (1)
- Erhärtungsprüfung (1)
- Ermüdung (1)
- Ermüdung b (1)
- Ermüdung bei hohen Lastspielzahlen (1)
- Ersatzbrennstoffe (1)
- Ettringit (1)
- Evaluation methods (1)
- Event-driven Process Chain (1)
- Evolutionäre Algorithmen (1)
- FIB-Klimawechsellagerung (1)
- Facility-Management (1)
- Fallbeispiel (1)
- Faseroptischer Sensor (1)
- Faserverbundschalentragwerk (1)
- Fehlerfortpflanzung (1)
- Fehlstellenmodell (1)
- Feinkornbaustahl (1)
- Ferri (1)
- Festbett (1)
- Festigkeit (1)
- Festkörpermechanik (1)
- Festmörtel (1)
- Filling moulds with fresh concrete (1)
- Filter (1)
- Finite Element Method (1)
- Finite Element Model (1)
- Finite-Volumen-Methode (1)
- Fließgewässer (1)
- Fließverhalten (1)
- Flächenverbund (1)
- Flüssigkeit-Bauwerk-Interaktion (1)
- Flüssigkeitsviskosität (1)
- Form optimization (1)
- Formabweichung (1)
- Formoptimierung (1)
- Formänderungsenergie (1)
- Fracture (1)
- Fracture Toughness (1)
- Fragmentierung (1)
- Fraktographie (1)
- Freeform (1)
- Freiform (1)
- Freistrahlen (1)
- Frischmörtel (1)
- Frost-Tau-Widerstand (1)
- Frostbeständigkeit (1)
- Frostwiderstand (1)
- Fuge (1)
- Functional design (1)
- Fügen (1)
- Füllen der Form mit Frischbeton (1)
- GFK (1)
- GFRP (1)
- Gabellagerung (1)
- Gebäude (1)
- Gebäudesimulation ESP-r (1)
- Gefährdung (1)
- Gefüge <Werkstoffkunde> (1)
- Gekoppelte Modelle (1)
- Generierung (1)
- Geometric Modeling (1)
- Geostatistik (1)
- Geotechnik (1)
- Geotextilien (1)
- Geschwindigkeit (1)
- Geschwindigkeitsmessung (1)
- Gesteinskörnungen (1)
- Gewässersanierung (1)
- Gips-Zement-Puzzolan-Bindemittel (1)
- Gipstreiben (1)
- Gitterfreie Methode (1)
- Glas (1)
- Glasfaserverstärkter Kunststoff (1)
- Glass (1)
- Grenzlast (1)
- Grenzzustand (1)
- Grenzzustandsanalyse (1)
- Groupware (1)
- Großtafelbauweise (1)
- H/V-Methode (1)
- Haftverbund (1)
- Haufwerksporiger Beton (1)
- Healing (1)
- Hochdruck (1)
- Hochofenzement (1)
- Holzbauteil (1)
- Holzrahmenbau (1)
- Holzrahmenbauwände (1)
- Holzstützen (1)
- Holztafelbau (1)
- Holzverbindung (1)
- Homogenisieren (1)
- Homogenisierung (1)
- Hydratationswärme (1)
- Hypertrophie (1)
- Immobilie (1)
- Immobilienwirtschaft (1)
- Impedanzfunktion (1)
- Indikator (1)
- Inferenzstatistik (1)
- Informationsmanagement (1)
- Informationssuche (1)
- Injektion (1)
- Instandhaltung (1)
- Instandhaltungsplanung (1)
- Instandsetzung (1)
- Integration (1)
- Interkristalline Korrosion (1)
- Internalisierung <Wirtschaft> (1)
- Interpartikuläre Wechselwirkungen (1)
- Inversionsalgorithmus (1)
- Inversionstheorie (1)
- Isogeometric Analysis (1)
- Joint type (1)
- Junger Beton (1)
- Kalk-Boden-Säulen (1)
- Kalkulation (1)
- Keramischer Baustoff (1)
- Klassieren (1)
- Kleben (1)
- Klebtechnologie (1)
- Klimaschutz (1)
- Klimawechsellagerung (1)
- Klinker (1)
- Klüftung (1)
- Knoten (1)
- Knotenmodell (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kohäsion (1)
- Kollaboration (1)
- Kommunikationsdienst (1)
- Kommunikationstechnik (1)
- Kompressibilität (1)
- Konsens (1)
- Konstruktion (1)
- Konstruktive Optimierung (1)
- Konstrutkiver Entwurf (1)
- Kontaktwechselwirkung (1)
- Kontinuierliche Simul (1)
- Kontinuitaetsbedingungen (1)
- Konvektion (1)
- Konzessionen (1)
- Kooperatives Arbeiten (1)
- Kornzerfall (1)
- Korrosionsgeschwindigkeit (1)
- Korrosionsprüfung (1)
- Kosten-Nutzen-Analyse (1)
- Kostenrechnung (1)
- Kraftschluss (1)
- Kriging (1)
- Kunststoffbeton (1)
- Kunststofffilme (1)
- Kunststoffkleben (1)
- Kurzzeit-Kriechen (1)
- LSCF (1)
- Lack of building (1)
- Langzeitverzögerer (1)
- Laser-Ultraschall (1)
- Laserschweißen (1)
- Lasertechnologie (1)
- Laservibrometer (1)
- Latentwärmespeicher (1)
- Lattice Grids (1)
- Laufzeit (1)
- Lebenszyklus (1)
- Lebenszyklusbetrachtungen (1)
- Leistungsmeldung (1)
- Leitung (1)
- Lichtlimitation (1)
- Lime Columns (1)
- Limit Atate Analysis (1)
- Logit-Modell (1)
- Lösungsanalytik (1)
- Lösungsverfahren (1)
- MAG-Schweißen (1)
- MFPA Weimar (1)
- Magnesiumsulfat (1)
- Maintenance (1)
- Makrosimulation (1)
- Markov-Kette mit stetiger Zeit (1)
- Materialermüdung (1)
- Mathematical Programming (1)
- Mauermörtel (1)
- Mechanik (1)
- Mechanisches Versagen (1)
- Mehrachsige Beanspruchung (1)
- Mehragentensystem (1)
- Mehrgitterverfahren (1)
- Meshless method (1)
- Meso-Scale (1)
- Metallkleben (1)
- Metallographie (1)
- Metaphosphat (1)
- Methoden und Verfahren (1)
- Microstructure (1)
- Mikro-Scale (1)
- Mikrosimulation (1)
- Mineralischer Rohstoff (1)
- Mixed Mode (1)
- Modale Parameter (1)
- Modellkalibrierung (1)
- Modezuordung (1)
- Monte Carlo method (1)
- Monte Carlo simulation (1)
- Monte-Carlo Simulation (1)
- Monte-Carlo-Integration (1)
- Monte-Carlo-Methode (1)
- Monte-Carlo-Simulation (1)
- Morinol (1)
- Multiscale modeling (1)
- Multiskalenmodellierung (1)
- Nachbeulverhalten (1)
- Nachfragerisiko (1)
- Nachhaltigkeit (1)
- Natriumchlorid (1)
- Neuronales Netz (1)
- Nichtlineare Berechnung (1)
- Nichtlineare Kon (1)
- Nichtlineare Stabilitätstheorie (1)
- Nichtlineares System (1)
- Non-linear buckling (1)
- Nonlinear Programming (1)
- Numerische Berechnung (1)
- Numerische Strömungsmechanik (1)
- Numerisches Verfahren (1)
- Nutzeroberfläche (1)
- Nutzungsdauer (1)
- Oberflächenabdichtung (1)
- Oberflächenspannung (1)
- Oberflächenvorbereitung (1)
- Object-oriented programming (1)
- Optimal Matching Technik (1)
- Optimal Matching Technique (1)
- Optimization (1)
- Organisationsstruktur (1)
- PCM-Putz (1)
- PCM-plaster (1)
- Parameteranalyse (1)
- Parameteridentif (1)
- Parameteridentification (1)
- Parametric Design (1)
- Parametrische Optimierung (1)
- Parametrischer Entwurf (1)
- Paramter Identification (1)
- Partialmodelle (1)
- Partikel-Schwarm-Optimierung (1)
- Perkolationstheorie (1)
- Perowskit (1)
- Perpendicular-to-grain loaded Connections (1)
- Pfahl (1)
- Pfahlgründung (1)
- Pfahlprobebelastung (1)
- Phase field model (1)
- Phasenumwandlung (1)
- Phasenübergangsmaterialien (1)
- Phosphonocarbonsäure (PBTC) (1)
- Phosphor (1)
- Pile Foundation (1)
- Pile Load Test (1)
- Planning process (1)
- Planung (1)
- Plastizität (1)
- Plastizitätstheorie (1)
- Platte (1)
- Polykristall (1)
- Polymer modification (1)
- Polymeradsorption (1)
- Polymermodifizierung (1)
- Porenlösung (1)
- Porenwasser (1)
- Porenwasserdruck (1)
- Portlandkalksteinzement (1)
- Portlandzement (1)
- Probabilistik (1)
- Produktinformation (1)
- Produktlebenszyklus (1)
- Profilstahl (1)
- Prognosemodell (1)
- Prognosequalität (1)
- Prävention (1)
- Prüftechnik (1)
- Prüfverfahren (1)
- Public Private Partnership (1)
- Push-over Analyse (1)
- Pyrolyse (1)
- Qualitätssicherung (1)
- Quarz (1)
- Quarzglas (1)
- Quellen (1)
- Queranschluß (1)
- Querdehnzahl (1)
- Querkraft (1)
- Querkraftbewehrung (1)
- Querkrafttragfähigkeit (1)
- Querschnittsanalyse (1)
- RDF (1)
- RQ15 (1)
- Radar (1)
- Radar <Druckschrift> (1)
- Rahmenecke (1)
- Rahmentragwerk (1)
- Rehabilitation (1)
- Reinforced Concrete (1)
- Reinforced concrete (1)
- Reliability (1)
- Reliability Theory (1)
- Reorganisation (1)
- Restbeton (1)
- Resttragfähigkeit (1)
- Revitalisierung (1)
- Risikoallokation (1)
- Risikomanagement (1)
- Risikoverteilung (1)
- Rissbreite (1)
- Rissentwicklung (1)
- Risssimulation (1)
- Rohrleitung (1)
- Rückbeton (1)
- SVB (1)
- Safety of work (1)
- Salzmischungen (1)
- Sauerstoff (1)
- Scale-Up (1)
- Schaden (1)
- Schadensanalyse (1)
- Schadensdiagnose (1)
- Schadensmechanik (1)
- Schadenspotential (1)
- Schallemissionsanalyse (1)
- Schaum (1)
- Schmale Luzin (1)
- Schnittgrößenumlagerungen (1)
- Schweinegülle (1)
- Schweißen (1)
- Schweißverbindung (1)
- Schwindisotherme (1)
- Schwindmechanismus (1)
- Schwindreduktion (1)
- Schwindreduzierer (1)
- Schwingung (1)
- Schwingungsanalyse (1)
- Schädigung (1)
- Schädigungsindikator (1)
- Schüttung (1)
- Sediment (1)
- Seerestaurierung (1)
- Segmentierung (1)
- Sekundärrohstoff (1)
- Selbstheilung (1)
- Selbstüberwachung (1)
- Sequenzanalyse <Soziologie> (1)
- Shear Capacity (1)
- Shear Strength (1)
- Sicherheit (1)
- Sicherheitstheorie (1)
- Sickerwasser (1)
- Siedlungswasserwirtschaft (1)
- Simulationsprozess (1)
- Software-Architektur (1)
- Software-Komponente (1)
- Softwareentwicklung (1)
- Sonnenenergie (1)
- Sonnenkollektor (1)
- Sorptionsisotherme (1)
- Sorptionswärme (1)
- Soziale Kosten (1)
- Spaltdruck (1)
- Spannungsintensitätsfaktor (1)
- Spannungszustand (1)
- SrMnO3 (1)
- Stability behavior (1)
- Stabnetz (1)
- Stahlbeton-Rahmenbauwerke (1)
- Stahlbetonbau (1)
- Stahlkonstruktionen (1)
- Standard-Software (1)
- Standardisierung (1)
- Standardsoftware (1)
- Standsicherheit (1)
- Statics (1)
- Statik (1)
- Statistik (1)
- Statistischer Größeneinfluss (1)
- Staumauer (1)
- Steel frames (1)
- Stehendes Gewässer (1)
- Steifigkeit (1)
- Steifigkeits-Degradation (1)
- Steifigkeitsdegradation (1)
- Stochastische Analysis (1)
- Stoffgesetz (1)
- Strahlung (1)
- Strain Energy (1)
- Straßenbenutzungsgebühr (1)
- Straßenbrücke (1)
- Straßennetz (1)
- Straßensektor (1)
- Stress Intensity Factor (1)
- Strukturbildung (1)
- Strukturmechanik (1)
- Strukturänderung (1)
- Struvite (1)
- Strömungsfeld (1)
- Stuckgips (1)
- Stufen-Schwellen-Sequenzen (1)
- Stuttgart / Sonderforschungsbereich Rechnergestützte Modellierung und Simulation zur Analyse (1)
- Suffosion (1)
- Super Healing (1)
- Suspendieren (1)
- Suspension (1)
- Suspensionsanalytik (1)
- Taumittel (1)
- Technische Überwachung (1)
- Teilsättigung (1)
- Teilung (1)
- Temperatur (1)
- Temperaturfeld (1)
- Tensiometer (1)
- Thermische Belastung (1)
- Thermische Energiespeicherung (1)
- Thermochemische Wärmespeicherung (1)
- Thermodynamik (1)
- Timber (1)
- Ton <Geologie> (1)
- Traffic revenue risk (1)
- Traglast (1)
- Tragwerksplanung (1)
- Tragwerksverstärkung (1)
- Transparenz (1)
- Transportgleichung (1)
- Träger (1)
- Typenbildung (1)
- Ultraschall-Laserverfahren (1)
- Ultraschallmesstechnik (1)
- Unfallursache (1)
- Unfallverhütung (1)
- Ungesättigte Zone (1)
- Unsaturated soil (1)
- Unsicherheit (1)
- Unsicherheitsanalyse (1)
- Untergrundklassifikation (1)
- Variationsprinzip (1)
- Variographie (1)
- Verbindungskoeffizienten (1)
- Verbindungstechnik (1)
- Verbunddeckenplatten (1)
- Verbunddokument (1)
- Verbundkonstruktionen (1)
- Verbundmittel (1)
- Verbundverhalten (1)
- Verflüssigung (1)
- Verglasung (1)
- Vergärung (1)
- Verkehrsablauf (1)
- Verkehrsmengenrisiko (1)
- Verkehrspolitik (1)
- Verkehrsqualität (1)
- Verkehrstechnik (1)
- Verkehrsverhalten (1)
- Verkehrswirtschaft (1)
- Verknüpfungen (1)
- Versagensmechanismen (1)
- Version control (1)
- Versionierung (1)
- Versuchsmethode (1)
- Verteilte Anwendungen (1)
- Verteilte Modelle (1)
- Vertrauen (1)
- Virtuelle Realität (1)
- Virtuelles Unternehmen (1)
- Visualisierung (1)
- Vollholz (1)
- Vorspannung (1)
- Wachstumshemmung (1)
- Warping moments (1)
- Warping stiffness (1)
- Wasserglas (1)
- Wasserhaushalt (1)
- Wasserlinsendecken (1)
- Wasserversorgung (1)
- Wasserwirtschaft (1)
- Waste management concept (1)
- Wavelet (1)
- Wechselwirkung (1)
- Wellenausbreitung (1)
- Werthandlungsbereich (1)
- Werthandlungsmodell (1)
- Wertstoff (1)
- Wirbelringe (1)
- Wirkmechanismus (1)
- Wirtschaftlichkeit (1)
- Woelbsteifigkeit (1)
- Wohnhäuser in Stahlbauweise (1)
- Wohnungsbau (1)
- Wohnungsbestand (1)
- Wohnungsmodernisierung (1)
- Wohnungswirtschaft (1)
- Wärmeeinflusszone (1)
- Wärmeverlust (1)
- Wärmeübertragung (1)
- Young's modulus (1)
- Zementhydratation (1)
- Zufallsfeld (1)
- Zugfestigkeit (1)
- Zugversuch (1)
- Zusatzmittel (1)
- Zuverlässigkeit in der Bauausführung (1)
- Zwangsspannung (1)
- Zweischaliges Mauerwerk (1)
- Zylinder-Achsen-Modell (1)
- accident reasons (1)
- acid resistant coating material (1)
- action mechanism (1)
- adaptive simulation (1)
- adaptivity (1)
- adhesion (1)
- adhesive bonding (1)
- admixture (1)
- aerated concrete (1)
- aged hemihydrate plasters (1)
- aggregate (1)
- alkali silicate gels (1)
- alkali silicate reaction (1)
- alkali-carbonate reaction (1)
- alkali-silica-reaktion (1)
- anaerobic digestion (1)
- atomistic simulation methods (1)
- autofrettage (1)
- autogenes Schwinden (1)
- autogenous shrinkage (1)
- automation (1)
- biaxial – sand (1)
- biaxial-sand (1)
- bridge (1)
- building Information model (1)
- building damage (1)
- building information modelling (1)
- building model (1)
- building modeling (1)
- building modelling (1)
- calcium sulfate hemihydrate (1)
- case study (1)
- ceramics (1)
- characterization of surface (1)
- civil engineer . active integration (1)
- climate storage (1)
- cluster analysis (1)
- cohesion (1)
- communications service (1)
- composite (1)
- composite elements (1)
- compressibility (1)
- computer aides optimization (1)
- concentrated load (1)
- concrete admixture (1)
- conduction (1)
- connection coefficients (1)
- connector (1)
- construction (1)
- construction chemicals (1)
- construction schedule (1)
- continuum damage mechanics (1)
- continuum mechanic (1)
- convection (1)
- cost estimation (1)
- course of events (1)
- crack mitigation (1)
- crack simulation (1)
- cracking of concrete (1)
- creep (1)
- cross-section analysis (1)
- damage (1)
- damage indicator (1)
- damage potential (1)
- decision (1)
- delamination (1)
- demand risk (1)
- deviatoric (1)
- deviatorisch (1)
- discontinuum mechanic (1)
- disjoining pressure (1)
- diskontinuum mechanics (1)
- dissimilarity measures (1)
- dissipation of energy (1)
- distributed applications (1)
- distributed models (1)
- drying-wetting (1)
- dynamic behavior (1)
- early project phase (1)
- earthquake damage (1)
- editor (1)
- effective properties (1)
- einschichtige Elemente (1)
- elastic properties (1)
- elastische Eigenschaften (1)
- elastische Parameter (1)
- energy-dissipation (1)
- engineer-technical integration (1)
- epicenter density (1)
- evolutionary algorithms (1)
- existing buildings (1)
- external costs (1)
- fachliche Integration (1)
- failure (1)
- faserverstärkte Kunststoffe (1)
- fault diagnosis (1)
- fiber optical Sensor (1)
- fiber reinforced polymer (1)
- fiber-reinforced plastics (1)
- fiber-reinforced shell structures (1)
- finite element (1)
- finite elements (1)
- flow resistance (1)
- fluidity (1)
- flussgebietsorientierte Bewirtschaftung (1)
- force-fit (1)
- fracture behavior (1)
- freeze-thaw resistance (1)
- freeze-thaw-resistance (1)
- fresh mortar (1)
- frost resistance (1)
- frühe Planungsphasen (1)
- generation (1)
- geometrical nonlinear (1)
- geostatistic (1)
- gravel-bed rivers (1)
- group document (1)
- guidance in construction (1)
- gypsum (1)
- gypsumcristalline (1)
- hardened mortar (1)
- hazard assessment (1)
- heat of hydration (1)
- high-strenght concrete (1)
- hochfester Beton (1)
- homogene heterogene Strukturcharakterisierung (1)
- housing stock (1)
- hydration (1)
- hydromechanische Prozesse (1)
- hygro-mechanical stability (1)
- hygro-mechanische Instabilität (1)
- hygrothermal long-time load-bearing performance (1)
- hygrothermisches Langzeittragverhalten (1)
- impedance function (1)
- indicator (1)
- individual roughness structure (1)
- individuelle Rauheitsstruktur (1)
- information management (1)
- information system (1)
- information technology (1)
- innere relative Feuchte (1)
- intelligente Materialien (1)
- interactive (1)
- interaktiv (1)
- intergranular damage (1)
- internal relative humidity (1)
- inversion procedure (1)
- inversion theorie (1)
- isogeometric analysis (1)
- job description (1)
- joining (1)
- joint (1)
- jointed rock (1)
- joints (1)
- k-Wert (1)
- keramische Masse (1)
- koiter approximation (1)
- kriging (1)
- laminated timber (1)
- landfill cover lining system (1)
- large panel buildings (1)
- latent heat storage (1)
- leakages (1)
- level-of-service (1)
- life cycle costs (1)
- linear elastic fracture mechanics (1)
- links (1)
- liquid storage tank (1)
- liquid vicosity (1)
- liquid-structure-interaction (1)
- load-test (1)
- local approach (1)
- logit-model (1)
- long-term retarder (1)
- long-time-performance (1)
- lösbare Verbindung (1)
- macroscale (1)
- masonry (1)
- material properties (1)
- materialgerecht (1)
- mathematical modelling (1)
- mechanische Effizienz (1)
- mehrphasig (1)
- mehrschichtige Elemente (1)
- mesoscale (1)
- metaphosphate (1)
- methodes and procedures (1)
- microscopy (1)
- microtremors (1)
- modal parameters (1)
- mode pairing (1)
- model updating (1)
- modulares Bauwerk (1)
- mortar method (1)
- motars (1)
- multigrid (1)
- multiphase (1)
- multiscale method (1)
- nachgeordnetes Straßennetz (1)
- natürliche Fließgewässer (1)
- nichtlineare Optimierung (1)
- niederzyklisch (1)
- non-destructive (1)
- non-destructive test procedures (1)
- non-linear optimisation (1)
- nonlinear creep (1)
- nonlinear finite elements (1)
- numeric analysis (1)
- numerical modelling (1)
- numerical simulation (1)
- object splitting (1)
- object versioning (1)
- object-orientation (1)
- objektoriertes Paradigma (1)
- operative mechanisms (1)
- optimal sensor positions (1)
- optimale Sensorpositionierung (1)
- parameter identification (1)
- parametric design (1)
- parametric optimization (1)
- partial models (1)
- percolation theory (1)
- phase change materials (1)
- phosphonocarbon acid (PBTC) (1)
- phosphorus (1)
- physical nonlinear (1)
- physically and geometrically nonlinear computation (1)
- physically non-linear analysis (1)
- physikalisch nichtlinear (1)
- pig manure (1)
- plane-strain conditions (1)
- polymer cement concrete (1)
- polymer concrete (1)
- pore solution (1)
- portland limestone cement (1)
- poröse Trägermaterialien (1)
- post-buckling analysis (1)
- prestress (1)
- prevention (1)
- probabilistics (1)
- processing of engineering tasks (1)
- pull-out (1)
- push-over analysis (1)
- quadratical optimization (1)
- quality assurance (1)
- quasicontinuum method (1)
- radiation (1)
- reinforced-concrete (1)
- reinforcement (1)
- reliability assessment (1)
- reliability in construction processes (1)
- remaining load capacitiy (1)
- residential buildings (1)
- residual stress (1)
- response surface method (1)
- restrained stress (1)
- revitalisation (1)
- risk allocation (1)
- road bridge (1)
- road pricing (1)
- roughness (1)
- roughness parameter (1)
- räumliche Anfragesprache (1)
- scale transition (1)
- scheduling (1)
- schwindreduzierendes Zusatzmittel (1)
- segmentation algorithm (1)
- seismic hazard (1)
- selective sensitivity (1)
- selektive Sensitivität (1)
- self-checking (1)
- semispace model (1)
- sequence (1)
- set regulator (1)
- short-term creep (1)
- shrinkage reducer (1)
- shrinkage reducing admixtures (1)
- shrinkage reducing agents (1)
- shrinkage reduction (1)
- silikatkeramische Masse (1)
- similarity measurement (1)
- site classification (1)
- slab (1)
- slip-block-test (1)
- slow-late-aggregate (1)
- software architecture (1)
- software component (1)
- soil-structure-interaction (1)
- solar energy (1)
- sommerlicher Wärmeschutz (1)
- spatial query (1)
- spherical (1)
- sphärisch (1)
- stability theory (1)
- standard (1)
- standard software (1)
- statistic size effect (1)
- steel (1)
- steel structures (1)
- step-pool sequences (1)
- stiffness-degradation (1)
- stirrups (1)
- stochastic (1)
- stochastics (1)
- strain (1)
- strategies (1)
- strength (1)
- stress (1)
- structural design (1)
- structural dynamics (1)
- structural reliability (1)
- substitute fuel (1)
- suffusion (1)
- superplasticizer (1)
- surface structures (1)
- sustainability (1)
- swelling (1)
- swelling pressure (1)
- synergy (1)
- säurefeste Beschichtungen (1)
- technical management (1)
- technische Nutzungsdauer (1)
- temperature (1)
- tensile strength (1)
- tension-stiffening (1)
- test-method (1)
- textural changes (1)
- thermal building simulation (1)
- thermal glazings (1)
- thermal load (1)
- thermal protection (1)
- thermodynamics (1)
- tiefgründige Bodenstabilisierung (1)
- timber (1)
- timber concrete composite (1)
- timber structure (1)
- timber-composite structures (1)
- toll road concessions (1)
- traffic flow (1)
- transformation plasticity (1)
- transformationsinduzierte Plastizität (1)
- transport of energy (1)
- travel behavior (1)
- typology (1)
- ultrasonic laser technique (1)
- uncertain data (1)
- uniaxial (1)
- unsaturation (1)
- upwind power plant (1)
- user interface (1)
- value activity model (1)
- variographie (1)
- virtual experiment (1)
- virtueller Versuch (1)
- water balance (1)
- water-glass (1)
- wave field dispersion (1)
- wave propagation (1)
- wavelet (1)
- weakest-link model (1)
- welding (1)
- wood-frame construction (1)
- wood-framed shear walls (1)
- wooden columns (1)
- work accidents (1)
- young concrete (1)
- zerstörungsfrei (1)
- zyklisch (1)
- µ-3D Computertomografie (1)
Die meisten traditionellen Methoden der Systemidentifikation beruhen auf der Abbildung der Meßwerte entweder im Zeit- oder im Frequenzbereich. In jüngerer Zeit wurden im Zusammenhang mit der Systemidentifikation Verfahren entwicklet, die auf der Anwendung der Wavelet-Transformation beruhen. Das Ziel dieser Arbeit war, einen Algorithmus zu entwickeln, der die Identifikation von Parametern eines Finite-Elemente-Modells, das ein experimentell untersuchtes mechanisches System beschreibt, ermöglicht. Es wurde eine Methode erarbeitet, mit deren Hilfe die gesuchten Parameter durch Lösen eines Systems von Bewegungsgleichungen im Zeit-Skalen-Bereich ermittelt werden. Durch die Anwendung dieser Darstellung können Probleme, die durch Rauschanteile in den Meßdaten entstehen, reduziert werden. Die Ergebnisse numerischer Simulation und einer experimentellen Studie bestätigen die Vorteile einer Anwendung der Wavelet-Transformation in der vorgeschlagenen Weise. ...
Die vorliegende Arbeit beschäftigt sich mit der geometrischen Suffosionsbeständigkeit von Erdstoffen. Mit dem wahrscheinlichkeitstheoretischen Ansatz der Perkolationstheorie wurde ein analytisches Verfahren gewählt, mit dem suffosive Materialtransportprozesse modelliert und quantifiziert werden können. Mit dem verwendeten Perkolationsmodell wurde eine beliebige Porenstruktur eines realen Erdstoffes im 3-Dimensionalen modelliert. Mögliche Materialtransportprozesse innerhalb der modellierten Porenstruktur wurden anschließend simuliert. Allgemein gültige Gesetzmäßigkeiten wurden hergeleitet und Grenzbedingungen formuliert. Diese sind vom Erdstoff unabhängig und beschreiben Zusammenhänge zwischen Materialtransport und Porenstruktur. Anwendbar sind diese Ergebnisse auf homogene, isotrope und selbstähnliche Erdstoffgefüge. Aussagen über konkrete Erdstoffe können über die Transformationsmethode erfolgen. Für die Verwendung der Transformationsmethode ist vorab die relevante Porenstruktur, d. h. die Porenengstellenverteilung, zu ermitteln.
Ausgehend von den klassischen Variationsprinzipien der Mechanik werden kinematische und gemischte Extremalprinzipe abgeleitet, die zur Beschreibung geometrisch und physikalisch nichtlinearen Tragverhaltens geeignet sind. Ein Schwerpunkt der Arbeit besteht in der Anwendung der Prinzipe zur Analyse und Bemessung von Stahlbeton-, Spannbeton- und Verbundquerschnitten. Aus einem einheitlichen Berechnungsmodell wird eine Vielzahl praxisrelevanter Problemstellungen abgeleitet. Ein weiterer Schwerpunkt ist die Anwendung der kinematischen Extremalformulierung für die geometrisch und physikalisch nichtlineare Berechnung von Stabtragwerken.
Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken.
The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history.
In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain.
Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics.
In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied.
Ziel der Arbeit ist es, einen Beitrag zur Weiterentwicklung und Adaption der Holz-Beton-Verbundbauweise auf den Straßenbrückenbau zu leisten. Dabei stehen differenzierte Untersuchungen zum Trag- und Verformungsverhalten hybrider Holzbrückentragwerke sowie die Entwicklung geeigneter Verbundelemente im Vordergrund. Um die Einführung dieser innovativen Bauweise in der Praxis zu unterstützen, werden Bemessungs- und Konstruktionshinweise erarbeitet. Aufbauend auf eine Analyse des derzeitigen Forschungs- und Entwicklungsstandes auf dem Gebiet des Holz-Beton-Verbundbaus erfolgt die Untersuchung des Trag- und Verformungsverhaltens von Holz-Beton-Verbundbrücken anhand einer umfangreichen Parameterstudie. Dabei wird der Einfluss verschiedener Geometrie- und Steifigkeitsparameter auf die Tragfähigkeit und Gebrauchstauglichkeit von Holz-Beton-Verbundbrücken quantifiziert. Spezielle Untersuchungen dienen der Evaluation der Ermüdungssicherheit und der Ermittlung der Steifigkeitsdegradation unter Langzeitbeanspruchung auf der Basis einer realitätsnahen Abbildung des differenten zeit- und klimaabhängigen Tragverhaltens der Verbundbaustoffe. Praxisgerechte Empfehlungen für die optimierte konstruktive Durchbildung hybrider Holzbrückentragwerke fassen die Ergebnisse der Parameterstudie zusammen. Aus den Parameteranalysen leitet sich ein Anforderungsprofil bezüglich der Steifigkeit und Tragfähigkeit geeigneter Verbundelemente für den Straßenbrückenbau ab. Das Tragverhalten von drei ausgewählten Verbundelementtypen, welche diesem Profil entsprechen, wird anhand systematischer Scherversuche unter Kurzzeit-, Langzeit- und dynamischer Belastung analysiert. Aufbauend auf diese Testreihen werden weiterführende umfangreiche Versuchsserien mit dem Verbundelement Dübelleiste zur Bestimmung der mechanischen Kennwerte und zur Analyse des Gesamttragverhaltens vorgestellt. In Auswertung der umfangreichen Bauteilversuche und rechnerischer Simulationen auf der Basis Finiter-Elemente-Modelle wird ein Bemessungskonzept erarbeitet und die Eignung des Verbundelementes Dübelleiste für den Einsatz im Hybridbrückenbau nachgewiesen.
Im Rahmen der Arbeit wird das Querkrafttragverhalten bewehrter Bauteile aus Porenbeton untersucht. Die vorherrschende Beschreibung des inneren Kräftezustandes basiert auf der Modellvorstellung eines Fachwerks oder Sprengwerks mit Stahlzugstreben und Betondruckstreben. Ziel ist die Entwicklung eines alternativen Verfahrens zur Ermittlung des inneren Kräftezustandes.
Ausgehend vom Prinzip des Minimums des elastischen Gesamtpotentials wird eine Extremalaufgabe für das mechanische Problem formuliert. Die numerische Umsetzung basiert auf der Überführung der Extremalaufgabe in eine nichtlineare Optimierungsaufgabe. Diese lässt sich mit Standardsoftware lösen. Der Vorteil dieser Vorgehensweise besteht darin, dass das grundlegende Verfahren unabhängig vom verwendeten Materialmodell ist. Nichtlineare Spannungs-Dehnungs-Beziehungen oder die Berücksichtigung der Rissbildung erfordern keine Anpassung des Berechnungsalgorithmus.
Bewehrte Porenbetonbauteile besitzen im Hinblick auf das Trag- und Verformungsverhalten einige Besonderheiten. Berechnungsansätze für Stahlbetonelemente lassen sich nicht ohne entsprechende Modifikationen übertragen lassen. Die Bewehrung wird aus glatten Stäben hergestellt, so dass nach der Herstellung nur ein Haftverbund wirksam ist. Dieser kann über die Lebensdauer teilweise oder vollständig versagen. Die Kraftübertragung zwischen den Verbundelementen muss durch entsprechende Kopplungselemente (z.B. Querstäbe, Bügel, Endwinkel) sichergestellt werden.
Der Bewehrungskorb ist im Porenbeton gebettet. Aufgrund der relativ niedrigen Festigkeit bzw. Steifigkeit des Porenbetons und des teilweise unwirksamen Verbundes treten Relativverschiebungen zwischen beiden Verbundmaterialien auf. Hier sind die Ursachen dafür zu finden, dass die Beanspruchung der Querkraftbewehrung viel geringer ist als bei vergleichbaren Stahlbetonbalken. Der Querkraftbewehrungsgrad erlaubt keine Rückschlüsse auf den Querkraftwiderstand.
Das zentrale Anliegen der Arbeit ist die Implementierung nichtlinearer Materialansätze, der Rissbildung des Porenbetons sowie der porenbetonspezifischen Besonderheiten verschieblicher Verbund, diskrete Verankerung der Bewehrung und Relativverschiebungen zwischen Porenbeton und Bewehrung) in das Berechnungsmodell.
Die Leistungsfähigkeit des entwickelten Berechnungsmodells wird anhand von Beispielen demonstriert. Die Kräfte in der Bewehrung sowie das Tragwerksverhalten werden realitätsnah bestimmt.
Die vorliegende Arbeit fokussiert die Optimierung freigeformter adaptiver Faserverbundflächentragwerke auf Basis einer entwickelten und auf einem parametrischen Gesamtmodell basierenden Entwurfsmethode. Die Übertragung adaptiver, natürlich inspirierter Vorgänge stellt eine weitreichende Inspirationsquelle dar. Adaptive Tragwerke können unter Anwendung von Smart Materials als materialsparende, filigrane Tragwerke ausgeführt werden. Die Erfüllung der Grenzzustände der Tragfähigkeit und der Gebrauchstauglichkeit wird nicht allein über die Querschnittsabmessungen sichergestellt. Die notwendige Bauteilsteifigkeit kann vielmehr durch Eintragung von Aktivierungsenergie (Operational Energy) realisiert werden. Auf diese Weise kann die aufgrund der Bauteilabmessungen gebundene Energie (Embodied Energy) minimiert werden. Die entwickelte Entwurfsmethode ermöglicht die Auslegung und Optimierung materialminimierter Schalentragwerke in einem mehrstufigen Prozess. Hierbei wird aus tragwerksplanerischer Sicht die numerische Formfindung, die statische Berechnung und die Aktor- und Sensorpositionierung berechnet. Zudem werden Analysen hinsichtlich der Nachhaltigkeit auf Basis einer Lebenszyklusanalyse durchgeführt. Aufgrund der unterschiedlichen, sich aber gegenseitig beeinflussenden Kriterien, ist eine Optimierung durchzuführen. In der vorliegenden Arbeit wird ein Ansatz zur Definition zulässiger Ökobilanzkennwerte von Smart Materials auf Basis der Energiedifferenz zwischen einer passiven und einer adaptiven Struktur vorgestellt. Anhand dieser Kennwerte kann die Entwicklung zukünftiger Smart Materials unter dem Aspekt der ganzheitlichen Nachhaltigkeit erfolgen. Die Allgemeingültigkeit und Übertragbarkeit der Entwurfsmethode auf weitere Tragsysteme im Bauwesen und speziell anderer Materialkonstellationen wird anhand verschiedener Beispiele aufgezeigt.
The nonlinear behavior of concrete can be attributed to the propagation of microcracks within the heterogeneous internal material structure. In this thesis, a mesoscale model is developed which allows for the explicit simulation of these microcracks. Consequently, the actual physical phenomena causing the complex nonlinear macroscopic behavior of concrete can be represented using rather simple material formulations. On the mesoscale, the numerical model explicitly resolves the components of the internal material structure. For concrete, a three-phase model consisting of aggregates, mortar matrix and interfacial transition zone is proposed. Based on prescribed grading curves, an efficient algorithm for the generation of three-dimensional aggregate distributions using ellipsoids is presented. In the numerical model, tensile failure of the mortar matrix is described using a continuum damage approach. In order to reduce spurious mesh sensitivities, introduced by the softening behavior of the matrix material, nonlocal integral-type material formulations are applied. The propagation of cracks at the interface between aggregates and mortar matrix is represented in a discrete way using a cohesive crack approach. The iterative solution procedure is stabilized using a new path following constraint within the framework of load-displacement-constraint methods which allows for an efficient representation of snap-back phenomena. In several examples, the influence of the randomly generated heterogeneous material structure on the stochastic scatter of the results is analyzed. Furthermore, the ability of mesoscale models to represent size effects is investigated. Mesoscale simulations require the discretization of the internal material structure. Compared to simulations on the macroscale, the numerical effort and the memory demand increases dramatically. Due to the complexity of the numerical model, mesoscale simulations are, in general, limited to small specimens. In this thesis, an adaptive heterogeneous multiscale approach is presented which allows for the incorporation of mesoscale models within nonlinear simulations of concrete structures. In heterogeneous multiscale models, only critical regions, i.e. regions in which damage develops, are resolved on the mesoscale, whereas undamaged or sparsely damage regions are modeled on the macroscale. A crucial point in simulations with heterogeneous multiscale models is the coupling of sub-domains discretized on different length scales. The sub-domains differ not only in the size of the finite elements but also in the constitutive description. In this thesis, different methods for the coupling of non-matching discretizations - constraint equations, the mortar method and the arlequin method - are investigated and the application to heterogeneous multiscale models is presented. Another important point is the detection of critical regions. An adaptive solution procedure allowing the transfer of macroscale sub-domains to the mesoscale is proposed. In this context, several indicators which trigger the model adaptation are introduced. Finally, the application of the proposed adaptive heterogeneous multiscale approach in nonlinear simulations of concrete structures is presented.
The numerical simulation of damage using phenomenological models on the macroscale was state of the art for many decades. However, such models are not able to capture the complex nature of damage, which simultaneously proceeds on multiple length scales. Furthermore, these phenomenological models usually contain damage parameters, which are physically not interpretable. Consequently, a reasonable experimental determination of these parameters is often impossible. In the last twenty years, the ongoing advance in computational capacities provided new opportunities for more and more detailed studies of the microstructural damage behavior. Today, multiphase models with several million degrees of freedom enable for the numerical simulation of micro-damage phenomena in naturally heterogeneous materials. Therewith, the application of multiscale concepts for the numerical investigation of the complex nature of damage can be realized. The presented thesis contributes to a hierarchical multiscale strategy for the simulation of brittle intergranular damage in polycrystalline materials, for example aluminum. The numerical investigation of physical damage phenomena on an atomistic microscale and the integration of these physically based information into damage models on the continuum meso- and macroscale is intended. Therefore, numerical methods for the damage analysis on the micro- and mesoscale including the scale transfer are presented and the transition to the macroscale is discussed. The investigation of brittle intergranular damage on the microscale is realized by the application of the nonlocal Quasicontinuum method, which fully describes the material behavior by atomistic potential functions, but reduces the number of atomic degrees of freedom by introducing kinematic couplings. Since this promising method is applied only by a limited group of researchers for special problems, necessary improvements have been realized in an own parallelized implementation of the 3D nonlocal Quasicontinuum method. The aim of this implementation was to develop and combine robust and efficient algorithms for a general use of the Quasicontinuum method, and therewith to allow for the atomistic damage analysis in arbitrary grain boundary configurations. The implementation is applied in analyses of brittle intergranular damage in ideal and nonideal grain boundary models of FCC aluminum, considering arbitrary misorientations. From the microscale simulations traction separation laws are derived, which describe grain boundary decohesion on the mesoscale. Traction separation laws are part of cohesive zone models to simulate the brittle interface decohesion in heterogeneous polycrystal structures. 2D and 3D mesoscale models are presented, which are able to reproduce crack initiation and propagation along cohesive interfaces in polycrystals. An improved Voronoi algorithm is developed in 2D to generate polycrystal material structures based on arbitrary distribution functions of grain size. The new model is more flexible in representing realistic grain size distributions. Further improvements of the 2D model are realized by the implementation and application of an orthotropic material model with Hill plasticity criterion to grains. The 2D and 3D polycrystal models are applied to analyze crack initiation and propagation in statically loaded samples of aluminum on the mesoscale without the necessity of initial damage definition.
In der Arbeit werden Möglichkeiten aufgezeigt, die Tragfähigkeit von Queranschlüssen an Trägern aus Voll- und Brettschichtholz abzuschätzen. Die Tragfähigkeit dieser Anschlüsse wird nicht allein durch die Tragfähigkeit der mechanischen Verbindungsmittel selbst begrenzt. Die Tragfähigkeit der Verbindungsmittel wird in dieser Arbeit a priori als hinreichend betrachtet. Sie kann z. B. nach der Theorie von JOHANSEN bestimmt werden. Insbesondere bei solchen Anschlüssen, welche unterhalb der Schwerachse von Trägern angeordnet sind, erzeugen die durch die Verbindungsmittel eingeleiteten Lasten Beanspruchungen, welche die Tragfähigkeiten dieser Anschlüsse bestimmen. Die Abschätzung der Tragfähigkeit auf der Basis von Spannungen hat bei dieser Problemstellung methodische Schwächen. Bauteile aus Holz können unter Gebrauchsbedingungen rißbehaftet sein. Mit den Methoden der Linear-Elastischen Bruchmechanik kann die Tragfähigkeit von rißbehafteten Bauteilen beurteilt werden. Es werden wegen der Vielzahl möglicher Ausführungvarianten lediglich Anschlüsse betrachtet, welche mit stiftförmigen Verbindungsmitteln hergestellt werden. Zur Bestimmung bruchmechanischer Kennwerte werden numerische Methoden angewendet. Es werden wichtige Parameter dieser Anschlüsse untersucht und hinsichtlich ihrer Berücksichtigung im Rechenmodell bewertet. Zur Verifizierung des Rechenmodells werden Vergleiche mit experimentellen Untersuchungen anderer Wissenschaftler angestellt. Der Einsatz verschiedener Versagenskriterien wird diskutiert. Schließlich wird ein formaler Zusammenhang zur Abschätzung der Tragfähigkeit für einzelne Verbindungsmittel hergestellt. Weiterhin wird die Tragfähigkeit von praxisüblichen Anschlüssen anhand einfacher Zusammenhänge aufgezeigt.
A Flexible Model for Incorporating Construction Product Data into Building Information Models
(2006)
When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work.
Abstract Developing and emerging tropical Asian countries have encountered fast urban development due to the migration of farmers seeking a better life in the city. This resulted in a lack of appro-priate infrastructure and inappropriate social services in many cities. Municipal solid waste management is no exception and is in fact often placed at the bottom of the list of priorities for the cities’ appropriate urban management plans since laws and regulations must first be for-mulated and implemented. The problem of unmanaged municipal solid waste certainly leads to air pollution, disease, and to soil and water contamination. These problems in tropical climates are compounded with high temperature, high-level humidity, heavy rainfall and frequent flooding. Stagnant water and leachate from waste quickly become the breeding grounds of in-sects, rodents and bacteria, thus creating a health hazard for workers and local populations. Moreover, water and groundwater contamination may lead to serious environmental degrada-tion with direct impacts on water supplies, and in the fast degradation of agricultural products, the backbone of most tropical Asian countries. Many cities still allow or tolerate dumping of waste in uncontrolled sites, and open burning that disperses particulates that most likely contain dioxins and furans. Even with increasingly scarce land availability within or in proximity of the cities, sanitary landfill is still the most often cho-sen disposal method around Asia because of its lower cost when compared to modern treatment systems. Yet, most of these landfill sites do not have proper lining, daily covering, methane recovery devices, leachate control systems, nor do they have long-term closure and monitoring plans, which implies short and long-term hazards. Some municipalities opted for incineration, which usually entails high operation and maintenance costs because of the need for supple-mental fuel and often-inappropriate running conditions. Although tropical conditions appear to favor certain disposal systems such as composting, appropriate technology needs to be identi-fied in order to reduce operation and maintenance costs while ensuring good quality outputs; compost plants have often been closed because of poor quality products due to the high content of plastic and glass particulates in the finished product. Tropical Asian cities are now required to identify affordable and sustainable solutions for the management of their increasing amount of waste generated daily, while ensuring minimal environmental impact, social acceptance and minimal land use. The purpose of this dissertation was to develop a user-friendly decision-making tool for public administrators and government officials in tropical Asian developing and emerging cities. This tool was developed based on a list of selected decision-making issues necessary in making an informed decision. The decision-making tool is to be used by decision-makers in making a pre-liminary assessment of a most appropriate waste management and treatment system for their municipality. Tropical Asian cities must consider a number of issues when deciding on their waste management plan such as the continuously changing quantum and composition of waste associated with the increasing population and income per capita, the high humidity levels, and the often-limited financial resources. Other determinant factors include legal, political, institu-tional, social and technical issues. Furthermore, administrators must realize the importance of each stage involved in waste management, which includes waste generation, collection, trans-port, waste characteristics, disposal and treatment. To better understand the complexity of the issues involved in tropical Asian municipalities, the city of Bangkok, Thailand’s largest city and capital, was selected as a case study for the management of its 9,000 tonnes of waste gen-erated daily. Numerous interviews, meetings along with the review of documents, reports and site visits offered an inside view of the tropical city’s various decision-making issues towards its waste management plan, and examine specific problems encountered by the city’s decision-makers. The review and analysis of the decision-making issues involved in Bangkok’s waste management plan showed how the decision-making tool can be used in various Asian tropical cities. In conclusion, waste management in an emerging tropical country involves specific challenges that need to be addressed. Economical, technical and social criteria need to be fully understood as to capacitate government officials in the selection of the most appropriate urban waste man-agement system. Limited budgets, lack of public awareness and poor systems’ management often cloud decision-makers in choosing what appears to be the best solution in the short term, but more costly over the years. Weather conditions and scarcity of land in proximity of the city make waste management especially challenging. The decision-making framework offers a tool to decision-makers, as to facilitate the understanding and identification of key issues necessary in the formulation of a sustainable urban waste management plan and in the selection of a tech-nically, economically and socially acceptable integrated MSW management system. A detailed feasibility study and master plan will follow the preliminary study as to define the plant´s specifications, its location and its financing.