500 Naturwissenschaften
Refine
Document Type
- Bachelor Thesis (3)
- Doctoral Thesis (3)
- Article (2)
Institute
Keywords
- BIM (2)
- Building Information Modeling (2)
- Erdbau (2)
- Affective Processing (1)
- Alterung (1)
- Alterungsdihydrat (1)
- Analytische Lösung (1)
- Anhydrit III (1)
- Augmented Reality Displays (1)
- Betongelenk (1)
Biofeedback constitutes a well-established, non-invasive method to voluntary interfere in emotional processing by means of cognitive strategies. However, treatment durations exhibit strong inter-individual variations and first successes can often be achieved only after a large number of sessions. Sham feedback constitutes a rather untapped approach by providing feedback that does not correspond to the participant’s actual state. The current study aims to gain insights into mechanisms of sham feedback processing in order to support new techniques in biofeedback therapy. We carried out two experiments and applied different types of sham feedback on skin conductance responses and pupil size changes during affective processing. Results indicate that standardized but context-sensitive sham signals based on skin conductance responses exert a stronger influence on emotional regulation compared to individual sham feedback from ongoing pupil dynamics. Also, sham feedback should forego unnatural signal behavior to avoid irritation and skepticism among participants. Altogether, a reasonable combination of stimulus features and sham feedback characteristics enables to considerably reduce the actual bodily responsiveness already within a single session.
Prediction of the groundwater nitrate concentration is of utmost importance for pollution control and water resource management. This research aims to model the spatial groundwater nitrate concentration in the Marvdasht watershed, Iran, based on several artificial intelligence methods of support vector machine (SVM), Cubist, random forest (RF), and Bayesian artificial neural network (Baysia-ANN) machine learning models. For this purpose, 11 independent variables affecting groundwater nitrate changes include elevation, slope, plan curvature, profile curvature, rainfall, piezometric depth, distance from the river, distance from residential, Sodium (Na), Potassium (K), and topographic wetness index (TWI) in the study area were prepared. Nitrate levels were also measured in 67 wells and used as a dependent variable for modeling. Data were divided into two categories of training (70%) and testing (30%) for modeling. The evaluation criteria coefficient of determination (R2), mean absolute error (MAE), root mean square error (RMSE), and Nash–Sutcliffe efficiency (NSE) were used to evaluate the performance of the models used. The results of modeling the susceptibility of groundwater nitrate concentration showed that the RF (R2 = 0.89, RMSE = 4.24, NSE = 0.87) model is better than the other Cubist (R2 = 0.87, RMSE = 5.18, NSE = 0.81), SVM (R2 = 0.74, RMSE = 6.07, NSE = 0.74), Bayesian-ANN (R2 = 0.79, RMSE = 5.91, NSE = 0.75) models. The results of groundwater nitrate concentration zoning in the study area showed that the northern parts of the case study have the highest amount of nitrate, which is higher in these agricultural areas than in other areas. The most important cause of nitrate pollution in these areas is agriculture activities and the use of groundwater to irrigate these crops and the wells close to agricultural areas, which has led to the indiscriminate use of chemical fertilizers by irrigation or rainwater of these fertilizers is washed and penetrates groundwater and pollutes the aquifer.
Jede Baumaßnahme ist durch einen Unikatcharakter geprägt. Individuelle Planung, Vergabe und Bauvorgänge stellen immer wieder aufs Neue eine große Herausforderung dar. Durch die sich teilweise sehr schnell ändernden Randbedingungen, müssen erarbeitete Abläufe häufig schnell geändert werden. Dies geschieht heutzutage meist auf Grundlage von Erfahrungen der am Bau Beteiligten. Auch bei bester Planung und Vorbereitung können Unwägbarkeiten den Bauprozess aufhalten. Das können ungeeigneter Baugrund, verschiedenste Hinderungen im Baufeld, schlechte Witterungsverhältnisse, Ausfälle von Maschinen, veränderte Zielsetzungen des Auftraggebers und vieles mehr sein. Dies führt zu Bauzeitverlängerungen und damit zu Kostensteigerungen.
Um diesen Problemen besser begegnen zu können und diesen komplexen und fehler-anfälligen Prozess zu unterstützen, sind ein verbesserter Informationsfluss, genauere Boden-aufschlüsse und eine exaktere Dimensionierung des einzusetzenden Gerätes notwendig.
Aus diesen Gründen ist der Einsatz von Building Information Modeling (BIM) sinnvoll. BIM bietet die Möglichkeit den Informationsfluss zu verbessern, die Datengenauigkeit zu erhöhen und Abläufe zu optimieren. Außerdem ermöglicht die Anwendung Planungsschritte miteinander zu verknüpfen, Kalkulationen zu vereinfachen und das Erstellen eines intelligenten Modells, das über den gesamten Lebenszyklus erweitert werden kann.
Die Maßnahmen des Spezialtiefbaus zählen zu den kostenintensivsten auf einer Baustelle. Großes Gerät und spezialisierte Firmen sind für eine erfolgreiche Durchführung unerlässlich. Da der Baugrund immer einen großen Unsicherheitsfaktor bildet, müssen geeignete, unterstützende Anwendungen zum Einsatz kommen. Hierfür bildet BIM eine geeignete Plattform. Protokolle, Maschinendaten und Kontrolldaten können hier webbasiert analysiert und für alle zugänglich gemacht werden, um zum einen die Transparenz zu steigern und zum anderen den Überblick, selbst bei hochkomplexen Bauvorhaben zu behalten.
In dieser Arbeit soll ein Überblick über die aktuelle Forschungssituation im Bereich Building Information Modeling im Erdbau, speziell im Spezialtiefbau, gegeben werden. Die Ergebnisse die mit Hilfe vorhandener Publikationen und Forschungsarbeiten verschiedener Universitäten und namhafter Forschungsgruppen zusammengetragen wurden sollen eine Grundlage für die weitere Forschung in diesem Bereich bilden. Über die Aufgabenstellung hinaus wird zusätzlich mit dem Softwareprogramm Revit 2014 ein Modell erstellt. Es wird versucht eine überschnittene Bohrpfahlwand zu modellieren und sie mit Parametern auszustatten. Zusammenfassend wird das Programm für den Einsatz bewertet.
Die meisten Baustellen bieten Optimierungspotential. Vor allem der Erdbau fordert durch seine hohe Dynamik und großen Unsicherheiten eine hohe Planungsleistung für jedes neue Projekt. Doch auch bei bester Planung und Vorbereitung kann der Bauprozess durch nicht vorhersehbare Einwirkungen aufgehalten werden. Dazu zählen Witterungseinflüsse, Baumaschinenausfälle, unvorhergesehene Bodenschichten und veränderte Zielsetzungen des Auftraggebers. Dies kann zu Störungen im Bauablauf führen, die eine Bauzeitverzögerung und eine Kostensteigerung nach sich ziehen. Um diese Probleme zu umgehen, sind ein verbesserter Informationsfluss, genaue Bodenaufschlüsse und eine exakte Dimensionierung des einzusetzenden Gerätes notwendig.
Hier kann Building Information Modeling (BIM) zum Einsatz kommen. Diese Anwendung bietet die Möglichkeit, die Datengenauigkeit zu erhöhen, den Informationsfluss auf der Baustelle zu verbessern, eine Informationsplattform für alle Beteiligten zu schaffen und die Abläufe transparent zu gestalten. Außerdem ermöglicht die Anwendung Planungsschritte miteinander zu verknüpfen, Kalkulationen zu vereinfachen und das Erstellen eines intelligenten Modells, das über den gesamten Lebenszyklus erweitert werden kann.
Die Grundlagen dieser Arbeit bilden die Begriffsdefinitionen zu Erdbau, Tiefbau und Building Information Modeling. Diese Arbeit setzt sich speziell mit Erdbauwerken und deren Sicherungsmaßnahmen auseinander. Darauf aufbauend wird im Rahmen einer Recherche der Forschungsstand im Bereich Building Information Modeling und Tiefbau zusammengefasst. Mit Hilfe einiger Forschungsbeiträge, -projekte, -verbände, Dissertationen und Anwendungsprogrammen wird ein Überblick geschaffen. Die Übersicht soll eine Grundlage für die weitere Forschung auf diesem Gebiet bilden. Abschließend findet eine Bewertung statt.
Über die Aufgabenstellung hinaus wird zusätzlich mit dem Softwareprogramm Revit 2014 ein Modell erstellt, um aufzuzeigen, dass das Potential auf Erdbaustellen mit BIM-Anwendungen besser ausgeschöpft werden kann. Es wird versucht eine Gabionenwand, eine Sicherungsmaßnahme von Erdbauwerken zu modellieren und sie mit Parametern auszustatten. Zusammenfassend wird das Programm für den Einsatz im Tiefbau bewertet.
Superplasticizers are utilized both to improve the fluidity during the placement and to reduce the water content of concretes. Both effects have also an impact on the properties of the hardened concrete. As a side effect the presence of superplasticizers affects the strength development of concretes that is strongly retarded. This may lead to an ecomomical drawback of the concrete manufacturing. The present work is aimed at gaining insights on the causes of the retarding effect of superplasticizers on the hydration of Portland cement. In order to simplify the complex interactions occurring during the hydration of Portland cement the majority of the work focuses on the interaction of superplasticizer and tricalcium silicate (Ca3SiO5 or C3S, the main compound of Portland cement clinker). The tests are performed in three main parts accompanied by methods as for example isothermal conduction calorimetry, electrical conductivity, Electron Microscopy, ICP-OES, TOC, as well as Analytical Ultracentrifugation.
In the first main part and based on the interaction of cations and anionic charges of polymers, the interactions between calcium ions and superplasticizers are investigated. As a main effect calcium ions are complexed by the functional groups of the polymers (carboxy, sulfonic). Calcium ions may be both dissolved in the aqueous phase and a constitute of particle interfaces. Besides these effects it is furthermore shown that superplasticizers induce the formation of nanoscaled particles which are dispersed in the aqueous phase (cluster formation). Analogous to recent findings in the field of biomineralization, it is reasonable to assume that these nanoparticles influence the crystal growth by their assembly process.
Based on the assumption that superplasticizers hinder either or both dissolution and precipitation and by that retard the cement hydration, the impact on separate reactions is investigated. On experiments that address the solubility of C-S-H phases and portlandite, it is shown that complexation of calcium ions in the aqueous phase by functional groups of polymers increases the solubility of portlandite. Contrary, in case of C-S-H solubility the complexation of calcium ions in solution leads to decrease of the calcium ion concentration in the aqueous phase. These effects are explained by differences in adsorption of polymers on C-S-H phases and portlandite. It is proposed that adsorption is stronger on C-S-H phases compared to portlandite due to the increased specific surface area of C-S-H phases. Following that, it is claimed that before polymers are able to adsorb on C-S-H phases the functional groups must be screened by calcium ions in the aqueous phase. It is further shown that data regarding the impact of superplasticizers on the unconstrained dissolution rate of C3S does not provide a clear relation to the overall retarding effect occurring during the hydration of C3S. Both increased and decreased dissolution rate with respect to the reference sample are detected. If the complexation capability of the superplasticizers is considered then also a reduced dissolution rate of C3S is determined. Despite the fact that the global hydration process is accelerated, the addition of calcite leads to a slower dissolution rate. Thus, a hindered unconstrained dissolution of C3S as possibly cause for the retarding effect still remains open for discussion. In the last section of this part, the pure crystallization of hydrate phases (C-S-H phases, portlandite) is fathomed. Results clearly show that superplasticizers prolong the induction time and modify the rate of crystal growth during pure crystallization in particular due to the complexation of ions in solution. But this effect is insufficient to account for the overall retarding effect. Further important factors are the blocking of crystal growth faces by adsorbed polymers and the dispersion of nanoscaled particles which hinders their agglomeration in order to build up crystals.
In the last main part of the work, the previously gathered results are utilized in order to investigate hydration kinetics. During hydration, dissolution and precipitation occur in parallel. Thereby, special attention is laid on the ion composition of the aqueous phase of C3S pastes and suspensions in order to determine the rate limiting step. All in all it is concluded that the retarding effect of superplasticizers on the hydration of tricalcium silicate is based on the retardation of crystallization of hydrate phases (C-S-H phases and portlandite). Thereby, the two effects complexation of calcium ions on surfaces and stabilization of nanoscaled particles are of major importance. These mechanisms may partly be compensated by template performance and increase in solubility by complexation of ions in solution. The decreased dissolution rate of C3S by the presence of superplasticizers during the in parallel occuring hydration process can only be assessed indirectly by means of the development of the ion concentrations in the aqueous phase (reaction path). Whether this observation is the cause or the consequence within the dissolution-precipitation process and therefore accounts for the retarding effect remains a topic for further investigations.
Besides these results it is shown that superplasticizers can be associated chemically with inhibitors because they reduce the frequency factor to end the induction period. Because the activation energy is widely unaffected it is shown that the basic reaction mechanism sustain. Furthermore, a method was developed which permits for the first time the determination of ion concentrations in the aqueous phase of C3S pastes in-situ. It is shown that during the C3S hydration the ion concentration in the aqueous phase is developed correspondingly to the heat release rate (calorimetry). The method permits the differentiation of the acceleration period in three stages. It is emphasized that crystallization of the product phases of C3S hydration, namely C-S-H phases and portlandite, are responsible for the end of the induction period.
Die Bruchmechanik hat einen wichtigen Platz im modernen Bauingenieurwesen, um die Ausbreitung von Rissen in Bauteilen und ihre Gefährlichkeit einzuschätzen. Dabei kommen verschiedenste Methoden zum Einsatz. In dieser Arbeit soll die Qualitätsbewertung für einige dieser Methoden untersucht werden. Zu vergleichen sind u. a. die Genauigkeit, die Schnelligkeit, die Komplexität und die Stabilität. In den Vergleich sind die Finite Elemente Methode, die Extended Finite Elemente Methode und eine Kopplungsmethode (analytische Lösung für die Rissspitze und Finite Elemente Lösung für den Rest des Gebietes) einzubeziehen. Als reales Beispiel aus dem Bauingenieurwesen wird ein Betongelenk mit einem vorhandenen Riss betrachtet.
Die Arbeit zeigt die wesentlichen Gründe auf, warum betahalbhydratreiche Niederbranntgipsbinder (industriell als Stuckgips bezeichnet) oft sehr unterschiedliche Eigenschaften aufweisen.
Der Anteil an Halbhydrat, welches aus dem stark hygroskopischen Anhydrit III (A III) durch die Reaktion mit Luftfeuchtigkeit entsteht, stellt einen erheblichen, bislang vollkommen unbeachteten Einfluss dar. Dieses Halbhydrat aus A III zeigt andere Oberflächeneigenschaften und ein Reaktionsverhalten, das von frisch gebranntem Betahalbhydrat abweicht.
Es zeigt sich, wie weitreichend der Einfluss physiko-chemischer Oberflächenprozesse wie Adsorption und Kondensation ist. Hierdurch wird nicht nur die Oberflächenenergie der Partikel abgebaut, sondern auch eine Verminderung der Hydratationswärme verursacht. Somit wirken sich physikalische Vorgänge thermodynamisch aus. Einwirkende und resultierende Parameter einer Alterung wirken wie folgt äußerst komplex zusammen:
Die dominierenden Bindemitteleigenschaften Abbindeverhalten und Wasseranspruch verändern sich durch eine Alterung sowohl aufgrund der Phasenumwandlungen als auch infolge der Veränderungen der Kristallite. Ebenso einflussreich ist die Veränderung der Oberflächencharakteristik. Die Auswirkung der Alterung auf die Reaktivität geht deutlich über den Abbau von Anhydrit III, die Dezimierung von abbindefähigem Material und die beschleunigende Wirkung von Alterungsdihydrat hinaus. Das Wachstum der Kristallite von Halbhydrat und die Verringerung der inneren Energie sowie die energetisch günstige spontane Beladung der Kristallgitterkanäle kleinster Anhydrit III-Kristallite mit dampfförmigem Wasser müssen als maßgebliche Ursachen für die Abnahme der Reaktivität infolge der Alterung herausgestellt werden. Die Abnahme der spezifischen Oberfläche und der Oberflächenenergie wirken sich außerdem auf den Lösungs- und den Hydratationsprozess aus. Der auf der Oberfläche von Anhydrit III kristallisierte Anhydrit II wirkt sich auch nach der Umwandlung von A III in Halbhydrat lösungshemmend aus. Infolge der alterungsbedingten Dihydratbildung, die bei anhaltender Feuchteeinwirkung einsetzt, wird diese Wirkung aufgehoben bzw. vermindert. Obgleich Dihydrat für seinen Beschleunigungseffekt bekannt ist, entfaltet Alterungsdihydrat infolge seiner besonderen Ausbildung innerhalb der wenige Moleküllagen umfassenden Kondenswasserschicht nur eine geringe keimbildende Wirkung.
Eine wesentliche Erkenntnis betrifft den Bindungscharakter des Überstöchiometrischen Wassers. Diesbezüglich ist eine rein physikalische Bindung nachweisbar. Das in der Arbeit als stärker adsorptiv gebunden bezeichnete Wasser kommt neben der Freien Feuchte ausschließlich bei Anwesenheit von Halbhydrat vor. Dieser Zusammenhang wird erstmalig hergestellt und mit Hilfe der kristallchemisch bedingten höheren Oberflächenenergie von Halbhydrat erklärt.
Gaze based human-computer-interaction has been a research topic for over a quarter century. Since then, the main scenario for gaze interaction has been helping handicapped people to communicate an interact with their environment. With the rapid development of mobile and wearable display technologies, a new application field for gaze interaction has appeared, opening new research questions.
This thesis investigates the feasibility of mobile gaze based interaction, studying deeply the use of pie menus as a generic and robust widget for gaze interaction as well as visual and perceptual issues on head mounted (wearable) optical see-through displays.
It reviews conventional gaze-based selection methods and investigates in detail the use of pie menus for gaze control. It studies and discusses layout issues, selection methods and applications. Results show that pie menus can allocate up to six items in width and multiple depth layers, allowing a fast and accurate navigation through hierarchical levels by using or combining multiple selection methods. Based on these results, several text entry methods based on pie menus are proposed. Character-by-character text entry, text entry with bigrams and with text entry with bigrams derived by word prediction, as well as possible selection methods, are examined in a longitudinal study. Data showed large advantages of the bigram entry methods over single character text entry in speed and accuracy. Participants preferred the novel selection method based on saccades (selecting by borders) over the conventional and well established dwell time method.
On the one hand, pie menus showed to be a feasible and robust widget, which may enable the efficient use of mobile eye tracking systems that may not be accurate enough for controlling elements on conventional interface. On the other hand, visual perception on mobile displays technologies need to be examined in order to deduce if the mentioned results can be transported to mobile devices.
Optical see-through devices enable observers to see additional information embedded in real environments. There is already some evidence of increasing visual load on the respective systems. We investigated visual performance on participants with a visual search tasks and dual tasks presenting visual stimuli on the optical see-through device, only on a computer screen, and simultaneously on both devices. Results showed that switching between the presentation devices (i.e. perceiving information simultaneously from both devices) produced costs in visual performance. The implications of these costs and of further perceptual and technical factors for mobile gaze-based interaction are discussed and solutions are proposed.