Bauhaus-Institut für zukunftsweisende Infrastruktursysteme (b.is)
Refine
Document Type
- Article (8)
- Doctoral Thesis (5)
- Conference Proceeding (1)
- Preprint (1)
Institute
- Bauhaus-Institut für zukunftsweisende Infrastruktursysteme (b.is) (15) (remove)
Keywords
- Abwasser (3)
- Biogas (3)
- Finite-Elemente-Methode (2)
- OA-Publikationsfonds2022 (2)
- crowdsourcing (2)
- elementary interaction (2)
- platform (2)
- set of objectives (2)
- Abfall (1)
- Abwasserreinigung (1)
Neuartige Sanitärsysteme zielen auf eine ressourcenorientierte Verwertung von Abwasser ab. Erreicht werden soll dies durch die separate Erfassung von Abwasserteilströmen. In den Fachöffentlichkeiten der Wasserwirtschaft und Raumplanung werden neuartige Sanitärsysteme als ein geeigneter Ansatz für die zukünftige
Sicherung der Abwasserentsorgung in ländlichen Räumen betrachtet. Die Praxistauglichkeit dieser Systeme wurde zwar in Forschungsprojekten nachgewiesen, bisher erschweren jedoch für Abwasserentsorger vielfältige Risiken die Einführung einer ressourcenorientierten Abwasserbewirtschaftung. Ausgehend von einer Untersuchung der Kontexte bei der Umsetzung eines neuartigen Sanitärsystems im ländlichen Raum Thüringens wird in diesem Beitrag der Frage nachgegangen, wie auf Landesebene mit dem abwasserwirtschaftlichen Instrumentarium die Einführung von ressourcenorientierten Systemansätzen unterstützt werden kann. Zentrale Elemente des Beitrags sind die Darstellung der wesentlichen Transformationsrisiken in Bezug auf die Einführung innovativer Lösungsansätze, eine Erläuterung der spezifischen abwasserwirtschaftlichen Instrumente sowie die Darlegung von Steuerungsansätzen,mit denen die Einführung von neuartigen Sanitärsystemen gefördert werden kann. Im Ergebnis wird die Realisierbarkeit von neuartigen Sanitärsystemen durch den strategischen Einsatz des Instrumentariums deutlich, gleichwohl die Wasserwirtschaft durch die Erweiterung der bisherigen Systemgrenzen auf die Kooperation mit anderen Bereichen der Daseinsvorsorge angewiesen ist.
Der vorliegende Beitrag beschreibt die Problematik bei der Prognose verkehrsbedingter Schadstoff-Immissionen. Im Mittelpunkt steht die Entwicklung und der Aufbau einer Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien. Die Simulationsumgebung wird über die drei Felder Verkehr, Emission, Immission entwickelt und findet zunächst Anwendung in der Evaluation verkehrlicher Maßnahmen für die Friedberger Landstraße in Frankfurt am Main.
Antimicrobial resistances (AMR) are ranked among the top ten threats to public health and societal development worldwide. Toilet wastewater contained in domestic wastewater is a significant source of AMR entering the aquatic environment. The current commonly implemented combined sewer systems at times cause overflows during rain events, resulting in the discharge of untreated wastewater into the aquatic environment, thus promoting AMR. In this short research article, we describe an approach to transform combined sewer systems into source separation-modified combined sewer systems that separately treat toilet wastewater. We employ simulations for demonstrating that source separation-modified combined sewer systems reduce the emission of AMR- causing substances by up to 11.5 logarithm levels. Thus, source separation- modified combined sewer systems are amongst the most effective means of combating AMR.
KEYWORDS
In the early 2000s the pre-Columbian, anthropologically produced black soil in the Amazon basin, „Terra Preta de Índio“, received greater scientific attention. Compared to the surrounding poor soils, this very fertile anthrosol contains significantly higher levels of microorganisms and nutrients. The reason for this was determined to be the likewise high levels of charred biomass. This stable carbon, now called biochar, has since been intensively examined as an option to improve soil and to store carbon.
Although the creation of Terra Preta was most likely based on a purposeful utilization of organic residues from households and gardens, biochar plays no role in the current recycling of bio-waste. However, the implementation of biochar could lead to many improvements. Results from agricultural research suggest that not only the yield capacity of soils can be increased but also the process performance of composting and biogas plants.
The latter is especially relevant since currently about 40% of all collected bio-waste in Germany is recycled in an energy-material cascade consisting of anaerobic digestion and composting. The use of biochar in this cascade could then sequentially increase biogas yields, reduce greenhouse gas emissions, and improve compost quality.
To realize the aforementioned advantages, the concept of biochar has to be integrated into the existing bio-waste cascade as practically as possible. This was done by the development of a theoretical scenario that allowed the analysis of energy and material flows to evaluate biochar’s recycling performance. Furthermore, the legal and economic framework were examined to assess the feasibility of the extended cascade and to suggest possible adjustments to the frameworks.
Antimicrobial resistance (AMR) is identified by the World Health Organization (WHO) as one of the top ten threats to public health worldwide. In addition to public health, AMR also poses a major threat to food security and economic development. Current sanitation systems contribute to the emergence and spread of AMR and lack effective AMR mitigation measures. This study assesses source separation of blackwater as a mitigation measure against AMR. A source-separation-modified combined sanitation system with separate collection of blackwater and graywater is conceptually described. Measures taken at the source, such as the separate collection and discharge of material flows, were not considered so far on a load balance basis, i.e., they have not yet been evaluated for their effectiveness. The sanitation system described is compared with a combined system and a separate system regarding AMR emissions by means of simulation. AMR is represented in the simulation model by one proxy parameter each for antibiotics (sulfamethoxa-zole), antibiotic-resistant bacteria (extended-spectrum beta-lactamase E. Coli), and antibiotic re-sistance genes (blaTEM). The simulation results suggest that the source-separation-based sanitation system reduces emissions of antibiotic-resistant bacteria and antibiotic resistance genes into the aquatic environment by more than six logarithm steps compared to combined systems. Sulfa-methoxazole emissions can be reduced by 75.5% by keeping blackwater separate from graywater and treating it sufficiently. In summary, sanitation systems incorporating source separation are, to date, among the most effective means of preventing the emission of AMR into the aquatic envi-ronment.
In this work, the degradation performance for the photocatalytic oxidation of eight micropollutants (amisulpride, benzotriazole, candesartan, carbamazepine, diclofenac, gabapentin, methlybenzotriazole, and metoprolol) within real secondary effluent was investigated using three different reactor designs. For all reactor types, the influence of irradiation power on its reaction rate and energetic efficiency was investigated. Flat cell and batch reactor showed almost similar substance specific degradation behavior. Within the immersion rotary body reactor, benzotriazole and methylbenzotriazole showed a significantly lower degradation affinity. The flat cell reactor achieved the highest mean degradation rate, with half time values ranging from 5 to 64 min with a mean of 18 min, due to its high catalysts surface to hydraulic volume ratio. The EE/O values were calculated for all micro-pollutants as well as the mean degradation rate constant of each experimental step. The lowest substance specific energy per order (EE/O) values of 5 kWh/m3 were measured for benzotriazole within the batch reactor. The batch reactor also reached the lowest mean values (11.8–15.9 kWh/m3) followed by the flat cell reactor (21.0–37.0 kWh/m3) and immersion rotary body reactor (23.9–41.0 kWh/m3). Catalyst arrangement and irradiation power were identified as major influences on the energetic performance of the reactors. Low radiation intensities as well as the use of submerged catalyst arrangement allowed a reduction in energy demand by a factor of 3–4. A treatment according to existing treatment goals of wastewater treatment plants (80% total degradation) was achieved using the batch reactor with a calculated energy demand of 7000 Wh/m3.
The detailed structural analysis of thin-walled circular pipe members often requires the use of a shell or solid-based finite element method. Although these methods provide a very good approximation of the deformations, they require a higher degree of discretization which causes high computational costs. On the other hand, the analysis of thin-walled circular pipe members based on classical beam theories is easy to implement and needs much less computation time, however, they are limited in their ability to approximate the deformations as they cannot consider the deformation of the cross-section.
This dissertation focuses on the study of the Generalized Beam Theory (GBT) which is both accurate and efficient in analyzing thin-walled members. This theory is based on the separation of variables in which the displacement field is expressed as a combination of predetermined deformation modes related to the cross-section, and unknown amplitude functions defined on the beam's longitudinal axis. Although the GBT was initially developed for long straight members, through the consideration of complementary deformation modes, which amend the null transverse and shear membrane strain assumptions of the classical GBT, problems involving short members, pipe bends, and geometrical nonlinearity can also be analyzed using GBT. In this dissertation, the GBT formulation for the analysis of these problems is developed and the application and capabilities of the method are illustrated using several numerical examples. Furthermore, the displacement and stress field results of these examples are verified using an equivalent refined shell-based finite element model.
The developed static and dynamic GBT formulations for curved thin-walled circular pipes are based on the linear kinematic description of the curved shell theory. In these formulations, the complex problem in pipe bends due to the strong coupling effect of the longitudinal bending, warping and the cross-sectional ovalization is handled precisely through the derivation of the coupling tensors between the considered GBT deformation modes. Similarly, the geometrically nonlinear GBT analysis is formulated for thin-walled circular pipes based on the nonlinear membrane kinematic equations. Here, the initial linear and quadratic stress and displacement tangent stiffness matrices are built using the third and fourth-order GBT deformation mode coupling tensors.
Longitudinally, the formulation of the coupled GBT element stiffness and mass matrices are presented using a beam-based finite element formulation. Furthermore, the formulated GBT elements are tested for shear and membrane locking problems and the limitations of the formulations regarding the membrane locking problem are discussed.
Multi-criteria decision analysis (MCDA) is an established methodology to support the decision-making of multi-objective problems. For conducting an MCDA, in most cases, a set of objectives (SOO) is required, which consists of a hierarchical structure comprised of objectives, criteria, and indicators. The development of an SOO is usually based on moderated development processes requiring high organizational and cognitive effort from all stakeholders involved. This article proposes elementary interactions as a key paradigm of an algorithm-driven development process for an SOO that requires little moderation efforts. Elementary interactions are self-contained information requests that may be answered with little cognitive effort. The pairwise comparison of elements in the well-known analytical hierarchical process (AHP) is an example of an elementary interaction. Each elementary interaction in the development process presented contributes to the stepwise development of an SOO. Based on the hypothesis that an SOO may be developed exclusively using elementary interactions (EIs), a concept for a multi-user platform is proposed. Essential components of the platform are a Model Aggregator, an Elementary Interaction Stream Generator, a Participant Manager, and a Discussion Forum. While the latter component serves the professional exchange of the participants, the first three components are intended to be automatable by algorithms. The platform concept proposed has been evaluated partly in an explorative validation study demonstrating the general functionality of the algorithms outlined. In summary, the platform concept suggested demonstrates the potential to ease SOO development processes as the platform concept does not restrict the application domain; it is intended to work with little administration moderation efforts, and it supports the further development of an existing SOO in the event of changes in external conditions. The algorithm-driven development of SOOs proposed in this article may ease the development of MCDA applications and, thus, may have a positive effect on the spread of MCDA applications.
Multi-criteria decision analysis (MCDA) is an established methodology to support the decision-making of multi-objective problems. For conducting an MCDA, in most cases, a set of objectives (SOO) is required, which consists of a hierarchical structure comprised of objectives, criteria, and indicators. The development of an SOO is usually based on moderated development processes requiring high organizational and cognitive effort from all stakeholders involved. This article proposes elementary interactions as a key paradigm of an algorithm-driven development process for an SOO that requires little moderation efforts. Elementary interactions are self-contained information requests that may be answered with little cognitive effort. The pairwise comparison of elements in the well-known analytical hierarchical process (AHP) is an example of an elementary interaction. Each elementary interaction in the development process presented contributes to the stepwise development of an SOO. Based on the hypothesis that an SOO may be developed exclusively using elementary interactions (EIs), a concept for a multi-user platform is proposed. Essential components of the platform are a Model Aggregator, an Elementary Interaction Stream Generator, a Participant Manager, and a Discussion Forum. While the latter component serves the professional exchange of the participants, the first three components are intended to be automatable by algorithms. The platform concept proposed has been evaluated partly in an explorative validation study demonstrating the general functionality of the algorithms outlined. In summary, the platform concept suggested demonstrates the potential to ease SOO development processes as the platform concept does not restrict the application domain; it is intended to work with little administration moderation efforts, and it supports the further development of an existing SOO in the event of changes in external conditions. The algorithm-driven development of SOOs proposed in this article may ease the development of MCDA applications and, thus, may have a positive effect on the spread of MCDA applications.
We propose an enhanced iterative scheme for the precise reconstruction of piezoelectric material parameters from electric impedance and mechanical displacement measurements. It is based on finite-element simulations of the full three-dimensional piezoelectric equations, combined with an inexact Newton or nonlinear Landweber iterative inversion scheme. We apply our method to two piezoelectric materials and test its performance. For the first material, the manufacturer provides a full data set; for the second one, no material data set is available. For both cases, our inverse scheme, using electric impedance measurements as input data, performs well.