Filtern
Dokumenttyp
- Artikel (Wissenschaftlicher) (32)
- Preprint (3)
Institut
Schlagworte
- Maschinelles Lernen (18)
- Machine learning (13)
- OA-Publikationsfonds2020 (10)
- machine learning (7)
- big data (6)
- Deep learning (5)
- OA-Publikationsfonds2018 (4)
- artificial intelligence (3)
- random forest (3)
- Biodiesel (2)
Biodiesel, as the main alternative fuel to diesel fuel which is produced from renewable and available resources, improves the engine emissions during combustion in diesel engines. In this study, the biodiesel is produced initially from waste cooking oil (WCO). The fuel samples are applied in a diesel engine and the engine performance has been considered from the viewpoint of exergy and energy approaches. Engine tests are performed at a constant 1500 rpm speed with various loads and fuel samples. The obtained experimental data are also applied to develop an artificial neural network (ANN) model. Response surface methodology (RSM) is employed to optimize the exergy and energy efficiencies. Based on the results of the energy analysis, optimal engine performance is obtained at 80% of full load in presence of B10 and B20 fuels. However, based on the exergy analysis results, optimal engine performance is obtained at 80% of full load in presence of B90 and B100 fuels. The optimum values of exergy and energy efficiencies are in the range of 25–30% of full load, which is the same as the calculated range obtained from mathematical modeling.
The classical Internet of things routing and wireless sensor networks can provide more precise monitoring of the covered area due to the higher number of utilized nodes. Because of the limitations in shared transfer media, many nodes in the network are prone to the collision in simultaneous transmissions. Medium access control protocols are usually more practical in networks with low traffic, which are not subjected to external noise from adjacent frequencies. There are preventive, detection and control solutions to congestion management in the network which are all the focus of this study. In the congestion prevention phase, the proposed method chooses the next step of the path using the Fuzzy decision-making system to distribute network traffic via optimal paths. In the congestion detection phase, a dynamic approach to queue management was designed to detect congestion in the least amount of time and prevent the collision. In the congestion control phase, the back-pressure method was used based on the quality of the queue to decrease the probability of linking in the pathway from the pre-congested node. The main goals of this study are to balance energy consumption in network nodes, reducing the rate of lost packets and increasing quality of service in routing. Simulation results proved the proposed Congestion Control Fuzzy Decision Making (CCFDM) method was more capable in improving routing parameters as compared to recent algorithms.
The K-nearest neighbors (KNN) machine learning algorithm is a well-known non-parametric classification method. However, like other traditional data mining methods, applying it on big data comes with computational challenges. Indeed, KNN determines the class of a new sample based on the class of its nearest neighbors; however, identifying the neighbors in a large amount of data imposes a large computational cost so that it is no longer applicable by a single computing machine. One of the proposed techniques to make classification methods applicable on large datasets is pruning. LC-KNN is an improved KNN method which first clusters the data into some smaller partitions using the K-means clustering method; and then applies the KNN for each new sample on the partition which its center is the nearest one. However, because the clusters have different shapes and densities, selection of the appropriate cluster is a challenge. In this paper, an approach has been proposed to improve the pruning phase of the LC-KNN method by taking into account these factors. The proposed approach helps to choose a more appropriate cluster of data for looking for the neighbors, thus, increasing the classification accuracy. The performance of the proposed approach is evaluated on different real datasets. The experimental results show the effectiveness of the proposed approach and its higher classification accuracy and lower time cost in comparison to other recent relevant methods.
A Hybrid Clustering and Classification Technique for Forecasting Short-Term Energy Consumption
(2018)
Electrical energy distributor companies in Iran have to announce their energy demand at least three 3-day ahead of the market opening. Therefore, an accurate load estimation is highly crucial. This research invoked methodology based on CRISP data mining and used SVM, ANN, and CBA-ANN-SVM (a novel hybrid model of clustering with both widely used ANN and SVM) to predict short-term electrical energy demand of Bandarabbas. In previous studies, researchers introduced few effective parameters with no reasonable error about Bandarabbas power consumption. In this research we tried to recognize all efficient parameters and with the use of CBA-ANN-SVM model, the rate of error has been minimized. After consulting with experts in the field of power consumption and plotting daily power consumption for each week, this research showed that official holidays and weekends have impact on the power consumption. When the weather gets warmer, the consumption of electrical energy increases due to turning on electrical air conditioner. Also, con-sumption patterns in warm and cold months are different. Analyzing power consumption of the same month for different years had shown high similarity in power consumption patterns. Factors with high impact on power consumption were identified and statistical methods were utilized to prove their impacts. Using SVM, ANN and CBA-ANN-SVM, the model was built. Sine the proposed method (CBA-ANN-SVM) has low MAPE 5 1.474 (4 clusters) and MAPE 5 1.297 (3 clusters) in comparison with SVM (MAPE 5 2.015) and ANN (MAPE 5 1.790), this model was selected as the final model. The final model has the benefits from both models and the benefits of clustering. Clustering algorithm with discovering data structure, divides data into several clusters based on similarities and differences between them. Because data inside each cluster are more similar than entire data, modeling in each cluster will present better results. For future research, we suggest using fuzzy methods and genetic algorithm or a hybrid of both to forecast each cluster. It is also possible to use fuzzy methods or genetic algorithms or a hybrid of both without using clustering. It is issued that such models will produce better and more accurate results.
This paper presents a hybrid approach to predict the electric energy usage of weather-sensitive loads. The presented methodutilizes the clustering paradigm along with ANN and SVMapproaches for accurate short-term prediction of electric energyusage, using weather data. Since the methodology beinginvoked in this research is based on CRISP data mining, datapreparation has received a gr eat deal of attention in thisresear ch. Once data pre-processing was done, the underlyingpattern of electric energy consumption was extracted by themeans of machine learning methods to precisely forecast short-term energy consumption. The proposed approach (CBA-ANN-SVM) was applied to real load data and resulting higher accu-racy comparing to the existing models.
2018 American Institute of Chemical Engineers Environ Prog, 2018
https://doi.org/10.1002/ep.12934
Due to the importance of identifying crop cultivars, the advancement of accurate assessment of cultivars is considered essential. The existing methods for identifying rice cultivars are mainly time-consuming, costly, and destructive. Therefore, the development of novel methods is highly beneficial. The aim of the present research is to classify common rice cultivars in Iran based on color, morphologic, and texture properties using artificial intelligence (AI) methods. In doing so, digital images of 13 rice cultivars in Iran in three forms of paddy, brown, and white are analyzed through pre-processing and segmentation of using MATLAB. Ninety-two specificities, including 60 color, 14 morphologic, and 18 texture properties, were identified for each rice cultivar. In the next step, the normal distribution of data was evaluated, and the possibility of observing a significant difference between all specificities of cultivars was studied using variance analysis. In addition, the least significant difference (LSD) test was performed to obtain a more accurate comparison between cultivars. To reduce data dimensions and focus on the most effective components, principal component analysis (PCA) was employed. Accordingly, the accuracy of rice cultivar separations was calculated for paddy, brown rice, and white rice using discriminant analysis (DA), which was 89.2%, 87.7%, and 83.1%, respectively. To identify and classify the desired cultivars, a multilayered perceptron neural network was implemented based on the most effective components. The results showed 100% accuracy of the network in identifying and classifying all mentioned rice cultivars. Hence, it is concluded that the integrated method of image processing and pattern recognition methods, such as statistical classification and artificial neural networks, can be used for identifying and classification of rice cultivars.