Refine
Document Type
- Conference Proceeding (38)
- Article (22)
- Doctoral Thesis (16)
- Part of a Book (10)
- Bachelor Thesis (8)
- Master's Thesis (3)
- Book (2)
- Periodical (2)
- Study Thesis (2)
- Habilitation (1)
Institute
- Graduiertenkolleg 1462 (19)
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (19)
- Institut für Strukturmechanik (ISM) (18)
- Universitätsbibliothek (11)
- Professur Bauphysik (8)
- Professur Informatik in der Architektur (6)
- F. A. Finger-Institut für Baustoffkunde (FIB) (4)
- An-Institute (2)
- Institut für Europäische Urbanistik (2)
- Professur Bauchemie und Polymere Werkstoffe (2)
Keywords
- Angewandte Mathematik (50)
- Angewandte Informatik (36)
- Computerunterstütztes Verfahren (36)
- Strukturmechanik (14)
- Elektronisches Buch (7)
- Bauphysik (3)
- Bibliothek (3)
- E-Book-Reader (3)
- Urheberrecht (3)
- Architektur (2)
Year of publication
- 2012 (105) (remove)
In crowdsourcingbasierten Systemen kommt der Qualitätssicherung des durch Benutzer generierten Inhaltes große Bedeutung für die Erhaltung der Benutzbarkeit zu. Das bauphysikalische Lehrspiel "BuildVille" benutzt für die Quiz-Anwendung einen Crowdsourcing-Ansatz: Die Quiz-Fragen werden von den Benutzern selbst generiert. Mit Hilfe dieser Arbeit soll sichergestellt werden, dass fehlerhafte, irrtümlicherweise oder zum Spaß eingegebene Fragen möglichst früh erkannt, korrigiert oder von der weiteren Verbreitung ausgeschlossen werden. Dazu soll mit Hilfe einer Analyse bestehender crowdsourcingbasierter Systeme bezüglich umgesetzter Qualitätssicherungsmaßnahmen ein Konzept für die QS-Maßnahmen in BuildVille entwickelt werden.
Modern digital material approaches for the visualization and simulation of heterogeneous materials allow to investigate the behavior of complex multiphase materials with their physical nonlinear material response at various scales. However, these computational techniques require extensive hardware resources with respect to computing power and main memory to solve numerically large-scale discretized models in 3D. Due to a very high number of degrees of freedom, which may rapidly be increased to the two-digit million range, the limited hardware ressources are to be utilized in a most efficient way to enable an execution of the numerical algorithms in minimal computation time. Hence, in the field of computational mechanics, various methods and algorithms can lead to an optimized runtime behavior of nonlinear simulation models, where several approaches are proposed and investigated in this thesis.
Today, the numerical simulation of damage effects in heterogeneous materials is performed by the adaption of multiscale methods. A consistent modeling in the three-dimensional space with an appropriate discretization resolution on each scale (based on a hierarchical or concurrent multiscale model), however, still contains computational challenges in respect to the convergence behavior, the scale transition or the solver performance of the weak coupled problems. The computational efficiency and the distribution among available hardware resources (often based on a parallel hardware architecture) can significantly be improved. In the past years, high-performance computing (HPC) and graphics processing unit (GPU) based computation techniques were established for the investigationof scientific objectives. Their application results in the modification of existing and the development of new computational methods for the numerical implementation, which enables to take advantage of massively clustered computer hardware resources. In the field of numerical simulation in material science, e.g. within the investigation of damage effects in multiphase composites, the suitability of such models is often restricted by the number of degrees of freedom (d.o.f.s) in the three-dimensional spatial discretization. This proves to be difficult for the type of implementation method used for the nonlinear simulation procedure and, simultaneously has a great influence on memory demand and computational time.
In this thesis, a hybrid discretization technique has been developed for the three-dimensional discretization of a three-phase material, which is respecting the numerical efficiency of nonlinear (damage) simulations of these materials. The increase of the computational efficiency is enabled by the improved scalability of the numerical algorithms. Consequently, substructuring methods for partitioning the hybrid mesh were implemented, tested and adapted to the HPC computing framework using several hundred CPU (central processing units) nodes for building the finite element assembly. A memory-efficient iterative and parallelized equation solver combined with a special preconditioning technique for solving the underlying equation system was modified and adapted to enable combined CPU and GPU based computations.
Hence, it is recommended by the author to apply the substructuring method for hybrid meshes, which respects different material phases and their mechanical behavior and which enables to split the structure in elastic and inelastic parts. However, the consideration of the nonlinear material behavior, specified for the corresponding phase, is limited to the inelastic domains only, and by that causes a decreased computing time for the nonlinear procedure. Due to the high numerical effort for such simulations, an alternative approach for the nonlinear finite element analysis, based on the sequential linear analysis, was implemented in respect to scalable HPC. The incremental-iterative procedure in finite element analysis (FEA) during the nonlinear step was then replaced by a sequence of linear FE analysis when damage in critical regions occured, known in literature as saw-tooth approach. As a result, qualitative (smeared) crack initiation in 3D multiphase specimens has efficiently been simulated.
6 Zusammenfassung und Ausblick
Die hydrothermal induzierte Phasentransformation konnte für ATZ-Keramik mit tiefenge-mittelten und tiefenaufgelösten Methoden charkterisiert und quantifiziert werden.
Die zeit- und temperaturabhängige Alterungskinetik von ATZ wurde durch neun Tempera-turstufen in einem Temperaturbereich von 50 °C bis 134 °C untersucht und die kinetischen Parameter nummerisch bestimmt. Für 3Y-TZP wurde diese Prozedur bei drei Temperaturen im Temperaturbereich von 70 °C bis 134 °C angewendet. Aufgrund des ARRHENIUS-Verhaltens der Umwandlungskinetik konnte der zeitliche Verlauf der isotherm stattfinden-den hydrothermal induzierten Phasentransformation bei Körpertemperatur simuliert wer-den. Die Simulation dient zur Bewertung der Langzeitstabilität von medizinischen Implanta-ten aus ATZ bzw. 3Y-TZP. Die Untersuchungen wurden in Wasser und in Wasserdampf bzw. wasserdampfgesättigter Luft durchgeführt. Die Langzeitsimulation für 3Y-TZP wurde an-hand von Explantat-Untersuchungen verifiziert.
ATZ zeigt gegenüber 3Y-TZP eine höhere Alterungsstabilität bezogen auf die zeitliche Ent-wicklung der monoklinen Phase. Im Hinblick auf die Oberflächenhärte, die durch die Pha-senumwandlung stark beeinflusst wird, erweist sich ATZ über einen langen Alterungszeit-raum stabiler als 3Y-TZP. Bis zu einem monoklinen Gehalt von 40 % beweist ATZ einen deutlichen Härtevorteil gegenüber 3Y TZP, dieser entspricht in der Langzeitsimulation für die Wasserlagerung ca. 35 Jahre. Das wirkt sich insbesondere bei Verschleißpaarungen wie beim künstlichen Hüftgelenk positiv aus.
Verschleißuntersuchungen an einer neu entwickelten Kugel-auf-Scheibe-Geometrie mit li-nearer Kinematik, die dem Hüftgelenk nachempfunden wurde, belegen die vorteilhaften Verschleißeigenschaften von ATZ in Form von sehr geringen Abtragsraten und einer intak-ten Oberfläche nach 720 000 absolvierten Zyklen. Dabei wurde sogar eine Aufhärtung der Oberfläche durch die Verschleißbeanspruchung um bis zu 8 % nachgewiesen.
Bei der tiefengemittelten Charakterisierung der hydrothermalen Alterung wurde in beiden Materialtypen festgestellt, dass die Geschwindigkeit der Phasentransformation neben der Temperatur merklich von der Änderung der H2O-Stoffmengenkonzentrantion an der Ober-fläche der Keramik abhängig ist, was sich mit den unterschiedlichen Aktivierungsenergien für Wasser- bzw. Wasserdampflagerung belegen lässt. Die Aktivierungsenergie Ea der hyd-rothermalen Phasentransformation wurde mit Hilfe der ARRHENIUS-Beziehung ermittelt und beträgt für ATZ bei Wasserdampflagerung 102 kJ/mol und bei Wasserlagerung 92 kJ/mol. Für Y-TZP beträgt die Aktivierungsenergie 114 kJ/mol bei Wasserdampflagerung und 102 kJ/mol bei Wasserlagerung. Der resultierende präexponentielle Faktor k0 unterscheidet sich für Wasserlagerung und Wasserdampflagerung um eine Größenordnung, was auf einen leicht andersartigen thermisch aktivierten Gesamtprozess hinweist.
Der Avrami-Exponent n, der einen Hinweis auf den Mechanismus der Keimbildung sowie deren geometrische Ordnung geben kann, zeigte keine signifikante Abhängigkeit von der Temperatur und vom Umgebungsmedium. Er ist dagegen zeitabhängig und fällt mit zuneh-mender Alterungszeit, d.h. mit zunehmendem monoklinem Gehalt von ca. 4 auf 0,5 ab, was auf eine abnehmende Keimbildungsrate hindeutet. In Verbindung mit weiteren Untersu-chungen durch unabhängige und zum Teil tiefenauflösende Methoden wie GIXRD, NRA und Knoop-Mikrohärte-Messungen lässt sich der Alterungsmechanismus, bzw. sein zeitlicher und örtlicher Ablauf, durch die drei Stadien A, B und C beschreiben:
A 0-5 ma. % m-ZrO2 Quasi-homogene Keimbildung an bevorzugten Orten wie Kornkan-ten und Kornecken (n≈4), Wassertransport wahrscheinlich via Korngrenzendiffusion, Aufhärtung der Oberfläche
B 5-40 ma. % m-ZrO2 Keimbildung an den Korngrenzflächen bis zur Keimsättigung (n≈2), monokline Randschicht wächst zeitlich linear, Wassertransport konvektiv über Mikrorisse, deutlicher Härteverlust der Oberfläche
C ≥ 40 ma. % m-ZrO2 Wachstum der monoklinen Kristallite von den Korngrenzflächen in die tetragonalen Kristallite unter starker Verzwillingung (n≈0,5), Abnahme der tetragonalen Kristallitgröße, starke Mikrorissbildung, dramatischer Rückgang der Oberflächenhärte
Die Kristallitgröße der monoklinen Phase verbleibt im ATZ über alle drei Abschnitte bei 30 ±5 nm. Ein Anwachsen der Kristallite ist mechanische behindert. Kleinere monokline Kristallite sind im ATZ thermodynamisch instabil. Die Kristallitgröße der tetragonalen Phase fällt in den Abschnitten A und B sehr langsam und in C sehr schnell bis auf 25 nm ab. Bei dieser Kristallitgröße ist die tetragonale Phase gegenüber der monoklinen Phase thermody-namisch stabil. Diese residualen tetragonalen Kristallite weisen nach vollständigem Reakti-onsablauf einem Anteil von 7 ma. % auf. Der Sättigungsgehalt der monoklinen Phase betrug in beiden Materialen unabhängig von der Temperatur bzw. dem Umgebungsmedium 75 % der ZrO2-Phase.
In Abschnitt C besitzt die residuale tetragonale Phase eine starke Orientierung. Dadurch wird die geometrische Bedingtheit der hydrothermal induzierten Phasenumwandlung ver-deutlicht. Die monokline Phase ist über den gesamten Alterungsprozess stark nach m(1 1 1) orientiert, was mit einer bevorzugten Umklapprichtung der c-Achse zur freien Oberfläche hin verbunden ist.
Mit Hilfe der tiefenaufgelösten Phasenanalyse konnte die Wachstumsgeschwindigkeit der monoklinen Randschicht von der Oberfläche in das Volumen untersucht werden. Die Ge-schwindigkeit des Schichtwachstums ist in Abschnitt B nicht zeit- und tiefenabhängig, son-dern konstant mit ausgeprägtem ARRHENIUS-Verhalten (Temperaturabhängigkeit). Die Akti-vierungsenergie der Schichtwachstumsgeschwindigkeit km liegt in der gleichen Größenord-nung wie die der Transformationskonstante k.
Die Umwandlungszone schreitet also mit konstanter Geschwindigkeit in das Volumen fort und hinterlässt ein verzweigtes Mikro- und Nanoriss-System. FESEM-Aufnahmen bestätigen das Vorhandensein einer porösen Randschicht, durch die das Wasser nahezu ungehindert eindringen kann.
NRA Untersuchungen deuten in Stadium A auf Korngrenzendiffusion hin und bestätigen in Stadium B einen konvektiven Transport des Wassers an die Transformationszone. Eine Dif-fusion über Sauerstoffleerstellen im Gitter konnte anhand von Proben aus 8YSZ nicht nach-gewiesen werden. Dagegen kommt es in dem verzweigten Riss- und Porensystem in der gealterten Randschicht zum Rücktransport des Wassers an die Oberfläche, sobald die Pro-ben aus der hydrothermalen Atmosphäre genommen, an Luft gelagert oder in die Hochva-kuumkammer der NRA-Messapparatur eingeschleust werden.
Mikrostrukturelle Untersuchungen an eigens entwickelten Verschleißpaarungen zeigten nach 720000 Zyklen ähnliche Oberflächeneigenschaften wie im Alterungsstadium A. Man kann daher davon ausgehen, dass die Stadien B und C aus Stabilitätsgründen in der tribolo-gischen Kontaktzone nicht existieren können und es dass sich im Falle einer gleichzeitigen, hydrothermalen und tribologischen Beanspruchung um einen stationären Alterungs- und Verschleißprozess handelt. Durch quasiplastische Deformation der monoklinen und tetra-gonalen Kristallite wird die Verschleißrate und die Abriebpartikel bei einer hart /hart Paa-rung aus ATZ deutlich minimiert, so dass ATZ für die Hüftendoprothetik ein durchaus geeig-neten Werkstoff darstellt, der sich auf der Grundlage der in dieser Arbeit gewonnenen Daten über eine Imlantationsdauer von .mehr als 15 Jahre stabil verhalten kann.
BAUHAUS ISOMETRY AND FIELDS
(2012)
While integration increases by networking, segregation strides ahead too. Most of us fixate our mind on special topics. Yet we are relying on our intuition too. We are sometimes waiting for the inflow of new ideas or valuable information that we hold in high esteem, although we are not entirely conscious of its origin. We may even say the most precious intuitions are rooting in deep subconscious, collective layers of the mind. Take as a simple example the emergence of orientation in paleolithic events and its relation to the dihedral symmetry of the compass. Consider also the extension of this algebraic matter into the operational structures of the mind on the one hand and into the algebra of geometry, Clifford algebra as we use to call it today, on the other. Culture and mind, and even the individual act of creation may be connected with transient events that are subconscious and inaccessible to cognition in principle. Other events causative for our work may be merely invisible too us, though in principle they should turn out attainable. In this case we are just ignorant of the whole creative process. Sometimes we begin to use unusual tools or turn into handicraft enthusiasts. Then our small institutes turn into workshops and factories. All this is indeed joining with the Bauhaus and its spirit. We shall go together into this, and we shall present a record of this session.
The topic of structural robustness is covered extensively in current literature in structural engineering. A few evaluation methods already exist. Since these methods are based on different evaluation approaches, the comparison is difficult. But all the approaches have one in common, they need a structural model which represents the structure to be evaluated. As the structural model is the basis of the robustness evaluation, there is the question if the quality of the chosen structural model is influencing the estimation of the structural robustness index. This paper shows what robustness in structural engineering means and gives an overview of existing assessment methods. One is the reliability based robustness index, which uses the reliability indices of a intact and a damaged structure. The second one is the risk based robustness index, which estimates the structural robustness by the usage of direct and indirect risk. The paper describes how these approaches for the evaluation of structural robustness works and which parameters will be used. Since both approaches needs a structural model for the estimation of the structural behavior and the probability of failure, it is necessary to think about the quality of the chosen structural model. Nevertheless, the chosen model has to represent the structure, the input factors and reflect the damages which occur. On the example of two different model qualities, it will be shown, that the model choice is really influencing the quality of the robustness index.
Texts from the web can be reused individually or in large quantities. The former is called text reuse and the latter language reuse. We first present a comprehensive overview of the different ways in which text and language is reused today, and how exactly information retrieval technologies can be applied in this respect. The remainder of the thesis then deals with specific retrieval tasks. In general, our contributions consist of models and algorithms, their evaluation, and for that purpose, large-scale corpus construction.
The thesis divides into two parts. The first part introduces technologies for text reuse detection, and our contributions are as follows: (1) A unified view of projecting-based and embedding-based fingerprinting for near-duplicate detection and the first time evaluation of fingerprint algorithms on Wikipedia revision histories as a new, large-scale corpus of near-duplicates. (2) A new retrieval model for the quantification of cross-language text similarity, which gets by without parallel corpora. We have evaluated the model in comparison to other models on many different pairs of languages. (3) An evaluation framework for text reuse and particularly plagiarism detectors, which consists of tailored detection performance measures and a large-scale corpus of automatically generated and manually written plagiarism cases. The latter have been obtained via crowdsourcing. This framework has been successfully applied to evaluate many different state-of-the-art plagiarism detection approaches within three international evaluation competitions.
The second part introduces technologies that solve three retrieval tasks based on language reuse, and our contributions are as follows: (4) A new model for the comparison of textual and non-textual web items across media, which exploits web comments as a source of information about the topic of an item. In this connection, we identify web comments as a largely neglected information source and introduce the rationale of comment retrieval. (5) Two new algorithms for query segmentation, which exploit web n-grams and Wikipedia as a means of discerning the user intent of a keyword query. Moreover, we crowdsource a new corpus for the evaluation of query segmentation which surpasses existing corpora by two orders of magnitude. (6) A new writing assistance tool called Netspeak, which is a search engine for commonly used language. Netspeak indexes the web in the form of web n-grams as a source of writing examples and implements a wildcard query processor on top of it.
Die thermochemische Wärmespeicherung über reversible Salzhydratation stellt einen aussichtsreichen Weg zur Speicherung von Niedertemperaturwärme, wie z.B. solarer Energie, dar.
Untersuchungen an Magnesiumsulfat-Hydraten zeigen, dass das bei 130°C entwässerte Magnesiumsulfat-Heptahydrat seinen thermodynamisch stabilen Endzustand während der Reaktion mit gasförmigem Wasser nicht wieder erreicht. Um diese kinetische Hemmung zu überwinden und den Einfluss von unterschiedlichen Porenräumen auf die Hydratation bzw. Sorption des Magnesiumsulfates zu charakterisieren, wurde das Magnesiumsulfat in Trägermaterialien auf Basis offenporiger Gläser mit durchschnittlichen Porendurchmessern von 4 nm bis 1,4 µm eingebracht und diese Kompositmaterialien untersucht. Dabei ist festgestellt worden, dass jede salzbezogene Sorptionswärme im Porenraum höher ist, als die des ungeträgerten Salzes und mit kleiner werdendem Porenradius weiter zunimmt.
Weiterhin wurden Teile des Magnesiumsulfates mit niedrig deliqueszierenden Salzen substituiert, um die Wasseraufnahme und somit die Wärmespeicherkapazität zu erhöhen. Dies stellt einen neuen Weg zur Herstellung von Kompositmaterialien dar, über den man Eigenschaften wie Deliqueszenzfeuchte und Desorptionstemperatur einstellen und an die Sorptionsbedingungen eines Speichers anpassen kann. Als niedrig deliqueszierende Salze wurden Magnesiumchlorid und Lithiumchlorid
als Zusätze untersucht, wobei ein Ansteigen der Sorptionswärme und Wasseraufnahme mit steigendem Chloridanteil festgestellt wurde. Aufgrund der geringeren Deliqueszenzfeuchte des Lithiumchlorides gegenüber dem Magnesiumchlorid wurden bei gleichen Massenverhältnissen höhere Sorptionswärmen erzielt. Untersuchungen zu Zinksulfat in Verbindung mit Chloriden bescheinigen diesem Salz -speziell bei tieferen Entwässerungstemperaturen- eine gute Eignung als Aktivstoff zur Wärmespeicherung.
Zusammenfassend konnte festgestellt werden, dass sich die Wärmespeicherkapazitäten über die Porengröße, in die das Salz eingebracht wird, und die gewählte Mischungszusammensetzung steuern lassen. Die gemessenen Sorptionswärmen ermöglichen insbesondere bei niedrigen Sorptionstemperaturen und hohen Luftfeuchtigkeiten den Schluss, dass die Verwendung von Salzmischungen als Aktivkomponente in Kompositmaterialien einen geeigneten Weg zur thermochemischen Speicherung solarer Wärme (≤130 °C) darstellt.
Metakaolin made from kaolin is used around the world but rarely in Vietnam where abundant deposits of kaolin is found. The first studies of producing metakaolin were conducted with high quality Vietnamese kaolins. The results showed the potential to produce metakaolin, and its effect has on strength development of mortars and concretes. However, utilisation of a low quality kaolin for producing Vietnamese metakaolin has not been studied so far.
The objectives of this study were to produce a good quality metakaolin made from low quality Vietnamese kaolin and to facilitate the utilisation of Vietnamese metakaolin in composite cements.
In order to reach such goals, the optimal thermal conversion of Vietnamese kaolin into metakaolin was carried out by many investigations, and as such the optimal conversion is found using the analysis results of DSC/TGA, XRD and CSI. During the calcination in a range of 500 – 800 oC lasting for 1 – 5 hours, the characterisation of calcinated kaolin was also monitored for mass loss, BET surface, PSD, density as well as the presence of the residual water. It is found to have a well correlation between residual water and BET surface.
The pozzolanic activity of metakaolin was tested by various methods regarding to the saturated lime method, mCh and TGA-CaO method. The results of the study showed which method is the most suitable one to characterise the real activity of metakaolin and can reach the greatest agreement with concrete performance. Furthermore, the pozzolanic activity results tested using methods were also analysed and compared to each other with respect to the BET surface.
The properties of Vietnam metakaolin was established using investigations on water demand, setting time, spread-flowability, and strength. It is concluded that depending on the intended use of composite cement and weather conditions of cure, each Vietnamese metakaolin can be used appropriately to produce (1) a composite cement with a low water demand (2) a high strength of composite cement (3) a composite cement that aims to reduce CO2 emissions and to improve economics of cement products (4) a high performance mortar.
The durability of metakaolin mortar was tested to find the needed metakaolin content against ASR, sulfat and sulfuric acid attacks successfully.
Methods for model quality assessment are aiming to find the most appropriate model with respect to accuracy and computational effort for a structural system under investigation. Model error estimation techniques can be applied for this purpose when kinematical models are investigated. They are counted among the class of white box models, which means that the model hierarchy and therewith the best model is known. This thesis gives an overview of discretisation error estimators. Deduced from these, methods for model error estimation are presented. Their general goal is to make a prediction of the inaccuracies that are introduced using the simpler model without knowing the solution of a more complex model. This information can be used to steer an adaptive process. Techniques for linear and non-linear problems as well as global and goal-oriented errors are introduced. The estimation of the error in local quantities is realised by solving a dual problem, which serves as a weight for the primal error. So far, such techniques have mainly been applied in
material modelling and for dimensional adaptivity. Within the scope of this thesis, available model error estimators are adapted for an application to kinematical models. Their applicability is tested regarding the question of whether a geometrical non-linear calculation is necessary or not. The analysis is limited to non-linear estimators due to the structure of the underlying differential equations. These methods often involve simplification, e.g linearisations. It is investigated to which extent such assumptions lead to meaningful results, when applied to kinematical models.
This paper presents a novel numerical procedure for computing limit and shakedown loads of structures using a node-based smoothed FEM in combination with a primal–dual algorithm. An associated primal–dual form based on the von Mises yield criterion is adopted. The primal-dual algorithm together with a Newton-like iteration are then used to solve this associated primal–dual form to determine simultaneously both approximate upper and quasi-lower bounds of the plastic collapse limit and the shakedown limit. The present formulation uses only linear approximations and its implementation into finite element programs is quite simple. Several numerical examples are given to show the reliability, accuracy, and generality of the present formulation compared with other available methods.
We present an extended finite element formulation for dynamic fracture of piezo-electric materials. The method is developed in the context of linear elastic fracture mechanics. It is applied to mode I and mixed mode-fracture for quasi-steady cracks. An implicit time integration scheme is exploited. The results are compared to results obtained with the boundary element method and show excellent agreement.
Monogenic functions play a role in quaternion analysis similarly to that of holomorphic functions in complex analysis. A holomorphic function with nonvanishing complex derivative is a conformal mapping. It is well-known that in Rn+1, n ≥ 2 the set of conformal mappings is restricted to the set of Möbius transformations only and that the Möbius transformations are not monogenic. The paper deals with a locally geometric mapping property of a subset of monogenic functions with nonvanishing hypercomplex derivatives (named M-conformal mappings). It is proved that M-conformal mappings orthogonal to all monogenic constants admit a certain change of solid angles and vice versa, that change can characterize such mappings. In addition, we determine planes in which those mappings behave like conformal mappings in the complex plane.
Architektonisches Entwerfen ist ein kreativer Prozess, der eine Lösung hervorbringt, die in ihrer Form und ihrer Funktionalität so noch nicht bestand. Resultat eines architektonischen Entwurfes ist ein Original, dessen Entstehen eine schöpferische Komponente erfordert. Dieser kreative Prozess ist nicht systematisierbar und kann auch nicht als Methode wiederholbar gemacht werden. Im Rahmen der architektonischen Lehre ist die Vermittlung von Methoden zur Entwurfsfindung jedoch ein wesentlicher Aspekt. Der hier vorgestellte Entwurf möchte zeigen, dass der Auffassung, allein intuitive Methoden als Entwurfsgrundlage zu nutzen, die Auffassung entgegen steht, eine reglementierte Methode zur Entwurfs- und Formfindung anzuwenden.
Eine solche reglementierte Methode wird hierbei als Entwurfsgrammatik bezeichnet.
In den 1950er Jahren entstehen zwei revolutionäre Werke des Komponisten und Architekten Iannis Xenakis: die Komposition Metastaseis und der Philips-Pavillon für die Weltausstellung in Brüssel. Basierend auf diesen Arbeiten wird eine Methode vorgestellt, welche musikalische Parameter in architektonischen Parameter transformiert.
Diese Methode bildet die Grundlage für ein exaktes räumliches Transformation-Modell, welches aus mathematischen Funktionen abgeleitet ist. Dabei weißt das Transformations-Modell eine starke Ähnlichkeit mit der Architektur des Pavillons auf.
A numerical analysis of the mode of deformation of the main load-bearing components of a typical frame sloping shaft headgear was performed. The analysis was done by a design model consisting of plane and solid finite elements, which were modeled in the program «LIRA». Due to the numerical results, the regularities of local stress distribution under a guide pulley bearing were revealed and parameters of a plane stress under both emergency and normal working loads were determined. In the numerical simulation, the guidelines to improve the construction of the joints of guide pulleys resting on sub-pulley frame-type structures were established. Overall, the results obtained are the basis for improving the engineering procedures of designing steel structures of shaft sloping headgear.
Die besondere Aggressivität von hochkonzentrierten Magnesiumsulfatlösungen bei Einwirkung auf Beton ist seit vielen Jahrzehnten bekannt. Neben dem Sulfat greift zusätzlich auch das Magnesium den Zementstein an. Bei hohen Lösungskonzentrationen nimmt der Magnesiumangriff gegenüber dem Sulfatangriff sogar eine dominante Rolle ein. Magnesiumgehalte unter 300 mg/l im Grundwasser gelten allerdings bislang als nicht angreifend. In Auslagerungs- und Laborversuchen wurde jedoch festgestellt, dass auch bei praxisrelevanten Magnesium- (<300 mg/l) und Sulfatgehalten (1.500 mg/l) das Magnesium zu einer deutlichen Verschärfung des Sulfatangriffes bei niedrigen Temperaturen führte. Diese Verschärfung trat bei Mörteln und Betonen auf, bei denen der erhöhte Sulfatwiderstand durch einen teilweisen Zementersatz mit 20 % Flugasche zu einem CEM II/A-LL erreicht werden sollte, gemäß der Flugascheregelung nach EN 206-1/DIN 1045-2.
Bei einem teilweisen Zementersatz durch 30 % Flugasche konnte auch in magnesiumhaltigen Sulfatlösungen eine deutliche Verbesserung des Sulfatwiderstandes erreicht werden. Mörtel mit HS-Zement als Bindemittel wiesen keinerlei Schäden auf. Schadensverursachend war eine Kombination mehrerer Einflüsse. Zum einen wurde der Sulfatwiderstand des Zement-Flugasche-Systems durch die unzureichende Reaktion der Flugasche infolge der niedrigen Lagerungstemperatur geschwächt. Zum anderen konnte durch die Einwirkung des Magnesiums in der Randzone vermutlich eine Destabilisierung der C-S-H-Phasen erfolgen, wodurch die Thaumasitbildung an dieser Stelle forciert wurde. Zusätzlich wurde durch den Portlanditverbrauch und die pH-Wert-Absenkung in der Randzone die puzzolanische Reaktion der Flugasche behindert.
Der Nachbehandlung eines Fahrbahndeckenbetons kommt zum Erzielen eines hohen Frost-Tausalz-Widerstandes der fertigen Betondecke eine besondere Bedeutung zu. Bei der Waschbetonbauweise erfolgt die Nachbehandlung in mehreren Schritten. Eine erste Nachbehandlung gewährleistet den Verdunstungsschutz des Betons bis zum Zeitpunkt des Ausbürstens des verzögerten Oberflächenmörtels. Daran schließt sich die zweite Nachbehandlung an, in der Regel durch Aufsprühen eines flüssigen Nachbehandlungsmittels.
Der zweite Nachbehandlungsschritt ist entscheidend für den Frost-Tausalz-Widerstand der Betondecke. Im Rahmen eines Forschungsprojektes wurde daher untersucht, inwiefern durch eine Optimierung der zweiten Nachbehandlung der Frost-Tausalz-Widerstand von Waschbetonoberflächen erhöht werden kann, insbesondere bei Verwendung hüttensandhaltiger Zemente. Schon durch eine einmalige Nassnachbehandlung wurde eine deutlich höherer Widerstand der Waschbetons gegen Frost-Tausalz-Angriff erzielt.
MODEL DESCRIBING STATIC AND DYNAMIC DISPLACEMENTS OF SILOS WALL DURING THE FLOW OF LOOSE MATERIAL
(2012)
Correct evaluation of wall displacements is a key matter when designing silos. This issue is important from both the standpoint of design engineer (load-bearing capacity of structures) and end-consumer (durability of structures). Commonplace methods of silo design mainly focus on satisfying limit states of load-bearing capacity. Current standards fail to specify methods of dynamic displacements analysis. Measurements of stressacting on silo walls prove that the actual stress is sum of static and dynamic stresses. Janssen came up with differential equation describing state of static equilibrium in cross-section of a silo. By solving the equation static stress of granular solid on silo walls can be determined. Equations of motion were determined from equilibrium equations of feature objects. General solution, describing dynamic stresses was presented as parametric model. This paper presents particular integrals of differential equation, which enable analysing displacements and vibrations for different rigidities of silo walls, types of granular solid and its flow rate.
In this paper experimental studies and numerical analysis carried out on reinforced concrete beam are partially reported. They aimed to apply the rigid finite element method to calculations for reinforced concrete beams using discrete crack model. Hence rotational ductility resulting from crack occurrence had to be determined. A relationship for calculating it in static equilibrium was proposed. Laboratory experiments proved that dynamic ductility is considerably smaller. Therefore scaling of the empirical parameter was carried out. Consequently a formula for its value depending on reinforcement ratio was obtained.
DISCRETE CRACK MODEL OF BORCZ FOR CALCULATING THE DEFLECTIONS OF BENDING REINFORCED CONCRETE BEAM
(2012)
In the design of the reinforced concrete beams loaded by the bending moment, it is assumed that the structure can be used at a level of load, that there are local discontinuities - cracks. Designing the element demands checking two limit states of construction, load capacity and usability. Limit states usability include also the deflection of the element. Deflections in the reinforced concrete beams with cracks are based on actual rigidity of the element. After cracking there is a local change in rigidity of the beam. The rigidity is variable in the element’s length and due to the heterogeneous structure of concrete, it is not possible to clearly describe those changes. Most standards of testing methods tend to simplify the calculations and take the average value of the beam’s rigidity on its entire length. The rigidity depends on the level of the maximal load of the beam. Experimental researches verify the value by inserting the coefficients into the formulas used in the theory of elasticity. The researches describe the changes in rigidity in the beam’s length more precisely. The authors take into consideration the change of rigidity, depending on the level of maximum load (continuum models), or localize the changes in rigidity in the area of the cracks (discrete models). This paper presents one of the discrete models. It is distinguished by the fact that the left side of the differential equation, that depends on the rigidity, is constant, and all effects associated with the scratches are taken as the external load and placed on the right side of the equation. This allows to generalize the description. The paper presents a particular integral of the differential equation, which allow analyzing the displacement and vibration for different rigidity of the silo’s walls, the flow rate and type of the flowing material.
This paper presents a methodology for uncertainty quantification in cyclic creep analysis. Several models- , namely BP model, Whaley and Neville model, modified MC90 for cyclic loading and modified Hyperbolic function for cyclic loading are used for uncertainty quantification. Three types of uncertainty are included in Uncertainty Quantification (UQ): (i) natural variability in loading and materials properties; (ii) data uncertainty due to measurement errors; and (iii) modelling uncertainty and errors during cyclic creep analysis. Due to the consideration of all type of uncertainties, a measure for the total variation of the model response is achieved. The study finds that the BP, modified Hyperbolic and modified MC90 are best performing models for cyclic creep prediction in that order. Further, global Sensitivity Analysis (SA) considering the uncorrelated and correlated parameters is used to quantify the contribution of each source of uncertainty to the overall prediction uncertainty and to identifying the important parameters. The error in determining the input quantities and model itself can produce significant changes in creep prediction values. The variability influence of input random quantities on the cyclic creep was studied by means of the stochastic uncertainty and sensitivity analysis namely the Gartner et al. method and Saltelli et al. method. All input imperfections were considered to be random quantities. The Latin Hypercube Sampling (LHS) numerical simulation method (Monte Carlo type method) was used. It has been found by the stochastic sensitivity analysis that the cyclic creep deformation variability is most sensitive to the Elastic modulus of concrete, compressive strength, mean stress, cyclic stress amplitude, number of cycle, in that order.
In this paper we review two distint complete orthogonal systems of monogenic polynomials over 3D prolate spheroids. The underlying functions take on either values in the reduced and full quaternions (identified, respectively, with R3 and R4), and are generally assumed to be nullsolutions of the well known Riesz and Moisil Théodoresco systems in R3. This will be done in the spaces of square integrable functions over R and H. The representations of these polynomials are explicitly given. Additionally, we show that these polynomial functions play an important role in defining the Szegö kernel function over the surface of 3D spheroids. As a concrete application, we prove the explicit expression of the monogenic Szegö kernel function over 3D prolate spheroids.
Due to the complex interactions between the ground, the driving machine, the lining tube and the built environment, the accurate assignment of in-situ system parameters for numerical simulation in mechanized tunneling is always subject to tremendous difficulties. However, the more accurate these parameters are, the more applicable the responses gained from computations will be. In particular, if the entire length of the tunnel lining is examined, then, the appropriate selection of various kinds of ground parameters is accountable for the success of a tunnel project and, more importantly, will prevent potential casualties. In this context, methods of system identification for the adaptation of numerical simulation of ground models are presented. Hereby, both deterministic and probabilistic approaches are considered for typical scenarios representing notable variations or changes in the ground model.
Civil engineers take advantage of models to design reliable structures. In order to fulfill the design goal with a certain amount of confidence, the utilized models should be able to predict the probable structural behavior under the expected loading schemes. Therefore, a major challenge is to find models which provide less uncertain and more robust responses. The problem gets even twofold when the model to be studied is a global model comprised of different interacting partial models. This study aims at model quality evaluation of global models with a focus on frame-wall systems as the case study. The paper, presents the results of the first step taken toward accomplishing this goal. To start the model quality evaluation of the global frame-wall system, the main element (i.e. the wall) was studied through nonlinear static and dynamic analysis using two different modeling approaches. The two selected models included the fiber section model and the Multiple-Vertical-Line-Element-Model (MVLEM). The influence of the wall aspect ratio (H=L) and the axial load on the response of the models was studied. The results from nonlinear static and dynamic analysis of both models are presented and compared. The models resulted in quite different responses in the range of low aspect ratio walls under large axial loads due to different contribution of the shear deformations to the top displacement. In the studied cases, the results implied that careful attention should be paid to the model quality evaluation of the wall models specifically when they are supposed to be coupled to other partial models such as a moment frame or a soil-footing substructure which their response is sensitive to shear deformations. In this case, even a high quality wall model would not result in a high quality coupled system since it fails to interact properly with the rest of the system.
Experimentelle Untersuchung eines Verfahrens zur optimalen Positionierung von Referenzsensoren bei der experimentellen Modalanalyse mit output-only Methoden nach Brehm (2011). Untersuchung des Einflusses der Referenzsensorpositionierung, -anzahl und der Positionierung der wandernden Sensoren unter Anwendung des Stochastic-Subspace-Verfahrens zur Auswertung der output-only Messdaten.
The aim of our contribution is to clarify the relation between totally regular variables and Appell sequences of hypercomplex holomorphic polynomials (sometimes simply called monogenic power-like functions) in Hypercomplex Function Theory. After their introduction in 2006 by two of the authors of this note on the occasion of the 17th IKM, the latter have been subject of investigations by different authors with different methods and in various contexts. The former concept, introduced by R. Delanghe in 1970 and later also studied by K. Gürlebeck in 1982 for the case of quaternions, has some obvious relationship with the latter, since it describes a set of linear hypercomplex holomorphic functions all power of which are also hypercomplex holomorphic. Due to the non-commutative nature of the underlying Clifford algebra, being totally regular variables or Appell sequences are not trivial properties as it is for the integer powers of the complex variable z=x+ iy. Simple examples show also, that not every totally regular variable and its powers form an Appell sequence and vice versa. Under some very natural normalization condition the set of all para-vector valued totally regular variables which are also Appell sequences will completely be characterized. In some sense the result can also be considered as an answer to a remark of K. Habetha in chapter 16: Function theory in algebras of the collection Complex analysis. Methods, trends, and applications, Akademie-Verlag Berlin, (Eds. E. Lanckau and W. Tutschke) 225-237 (1983) on the use of exact copies of several complex variables for the power series representation of any hypercomplex holomorphic function.
Lesen - Schreiben - Apparate
(2012)
This paper presents a robust model updating strategy for system identification of wind turbines. To control the updating parameters and to avoid ill-conditioning, the global sensitivity analysis using the elementary effects method is conducted. The formulation of the objective function is based on M¨uller-Slany’s strategy for multi-criteria functions. As a simulationbased optimization, a simulation adapter is developed to interface the simulation software ANSYS and the locally developed optimization software MOPACK. Model updating is firstly tested on the beam model of the rotor blade. The defect between the numerical model and the reference has been markedly reduced by the process of model updating. The effect of model updating becomes more pronounced in the comparison of the measured and the numerical properties of the wind turbine model. The deviations of the frequencies of the updated model are rather small. The complete comparison including the free vibration modes by the modal assurance criteria shows the excellent coincidence of the modal parameters of the updated model with the ones from the measurements. By successful implementation of the model validation via model updating, the applicability and effectiveness of the solution concept has been demonstrated.
This paper is focused on the first numerical tests for coupling between analytical solution and finite element method on the example of one problem of fracture mechanics. The calculations were done according to ideas proposed in [1]. The analytical solutions are constructed by using an orthogonal basis of holomorphic and anti-holomorphic functions. For coupling with finite element method the special elements are constructed by using the trigonometric interpolation theorem.
It is well known that complex quaternion analysis plays an important role in the study of higher order boundary value problems of mathematical physics. Following the ideas given for real quaternion analysis, the paper deals with certain orthogonal decompositions of the complex quaternion Hilbert space into its subspaces of null solutions of Dirac type operator with an arbitrary complex potential. We then apply them to consider related boundary value problems, and to prove the existence and uniqueness as well as the explicit representation formulae of the underlying solutions.
Many structures in different engineering applications suffer from cracking. In order to make reliable prognosis about the serviceability of those structures it is of utmost importance to identify cracks as precisely as possible by non-destructive testing. A novel approach (XIGA), which combines the Isogeometric Analysis (IGA) and the Extended Finite Element Method (XFEM) is used for the forward problem, namely the analysis of a cracked material, see [1]. Applying the NURBS (Non-Uniform Rational B-Spline) based approach from IGA together with the XFEM allows to describe effectively arbitrarily shaped cracks and avoids the necessity of remeshing during the crack identification problem. We want to exploit these advantages for the inverse problem of detecting existing cracks by non-destructive testing, see e.g. [2]. The quality of the reconstructed cracks however depends on two major issues, namely the quality of the measured data (measurement error) and the discretization of the crack model. The first one will be taken into account by applying regularizing methods with a posteriori stopping criteria. The second one is critical in the sense that too few degrees of freedom, i.e. the number of control points of the NURBS, do not allow for a precise description of the crack. An increased number of control points, however, increases the number of unknowns in the inverse analysis and intensifies the ill-posedness. The trade-off between accuracy and stability is aimed to be found by applying an inverse multilevel algorithm [3, 4] where the identification is started with short knot vectors which successively will be enlarged during the identification process.
Helsinki Central
(2012)
Als zentraler Ort und Eingangstor in die finnische Hauptstadt bietet der Bereich um den Bahnhof, in dem sich das Baufeld befindet zu wenig räumliche Qualitäten und bildet gleichzeitig eine Barriere zwischen dem historischen Stadtkern und dem politischen und kulturellem Zentrum der Stadt.
Der historische Bahnhof aus der Epoche des Jugendstils ist momentan eingeschlossen von einer hochfrequentierten Straße im Süden und den flankierenden Stationen des Busbahnhofs an der Ost- und Westseite.
Die fußläufigen Verbindungen in die Altstadt sind gestört und das Regierungsviertel mit
dem Reichstagsgebäude werden links liegen gelassen. Eine Orientierung als Neuankömmling ist schwer möglich.
Darüber hinaus kommt etwa die Hälfte der Züge, vor allem die Regionalzüge nicht in der Bahnhofshalle des Kopfbahnhofes an, weil die Begrenzung durch die
Seitenflügel nur eine Erweiterung des Bahnhofs nach Norden hin zuließ.
Entstanden ist ein Entwurf der versucht, dem gesamten Bereich um den Bahnhof ein neues Gesicht zu geben und eine Verbesserung auf unterschiedlichen Ebenen zu erreichen. Er bündelt zum einen die verschiedenen Verkehrsströme und stellt eine bisher unterbrochene Querverbindung zwischen den benachbarten Stadtvierteln entlang des Bahnhofsareals her. Zum anderen trägt er dem Erfordernis nach einem städtebaulichen Gegenüber für das
Regierungsgebäude Rechnung, welches damit in den Verbund der kulturellen Einrichtungen auf dem Töölönlahti Gelände aufgenommen wird. Darüber hinaus belebt er eine Besonderheit von Helsinki. Zu Beginn des 20. Jahrhunderts bestand die Notwendigkeit den Hafen an das Schienennetz anzubinden. Da der Stadtkern bereits sehr dicht bebaut war, wurde ein Eisenbahnring entlang der Küste, einmal um das Stadtzentrum herum gebaut. Seitdem die Verbindung stillgelegt wurde liegt dieser Ring brach, was nun die große Chance bietet, eine kreuzungsfreien Rad- und Fußweg zu etablieren, der durch den Entwurf eines Mobilityhubs geschlossen würde.
In der vorliegenden Broschüre werden die städtebaulichen Rahmenbedingungen, die Analyse der gegenwärtigen Situation und der eigentliche Entwurfsprozess, der zu dieser Lösung führte dokumentiert.
Eine der jüngsten Entwicklungen in der Games Branche sind sogenannte Social Games. Hierbei handelt es sich um digitale Spiele, die innerhalb von sozialen Netzwerken, wie z.B. Facebook und Myspace, gespielt werden.
Studien zeigen, dass kommerzielle digitale Spiele mehr als nur ein Zeitvertreib sind. Sie fördern sowohl kognitive, als auch affektive
und psychomotorische Kompetenzen. Aus diesem Grund werden seit Jahrzehnten digitale Spiele in der Pädagogik eingesetzt, um ihre Motivationskraft zu nutzen, um Lerneffekte zu erzielen.
Ziel dieser Arbeit ist es Spielmechaniken für ein bauphysikalisches Social Game zu entwickeln. Ausgehend von der Identifikation von Spielmechaniken, basierend auf einer Analyse der Funktionsweisen existierender populärer Social Games, und einem grundlegenden pädagogischen Verständnis bezüglich Digital Game Based Learning (DGBL), werden Spielmechaniken entwickelt, mit deren Hilfe bauphysikalische Fachkompetenzen vermittelt werden können.
Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen Lösung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung räumlicher Elemente, z.B. von Parzellen, Gebäuden, Räumen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Forschungsprojekts entstanden.
Aktionsräume in Dresden
(2012)
In vorliegender Studie werden die Aktionsräume von Befragten in Dresden über eine standardisierte Befragung (n=360) untersucht. Die den Aktionsräumen zugrundeliegenden Aktivitäten werden unterschieden in Einkaufen für den täglichen Bedarf, Ausgehen (z.B. in Café, Kneipe, Gaststätte), Erholung im Freien (z.B. spazieren gehen, Nutzung von Grünanlagen) und private Geselligkeit (z.B. Feiern, Besuch von Verwandten/Freunden). Der Aktionsradius wird unterschieden in Wohnviertel, Nachbarviertel und sonstiges weiteres Stadtgebiet. Um aus den vier betrachteten Aktivitäten einen umfassenden Kennwert für den durchschnittlichen Aktionsradius eines Befragten zu bilden, wird ein Modell für den Kennwert eines Aktionsradius entwickelt. Die Studie kommt zu dem Ergebnis, dass das Alter der Befragten einen signifikanten – wenn auch geringen – Einfluss auf den Aktionsradius hat. Das Haushaltsnettoeinkommen hat einen mit Einschränkung signifikanten, ebenfalls geringen Einfluss auf alltägliche Aktivitäten der Befragten.
In vorliegender Studie werden die Wohnstandortpräferenzen der Sinus-Milieugruppen in Dresden über eine standardisierte Befragung (n=318) untersucht. Es wird unterschieden zwischen handlungsleitenden Wohnstandortpräferenzen, die durch Anhaltspunkte auf der Handlungsebene stärker in Betracht gezogen werden sollten, und Wohnstandortpräferenzen, welche eher orientierenden Charakter haben. Die Wohnstandortpräferenzen werden untersucht anhand der Kategorien Ausstattung/Zustand der Wohnung/des näheren Wohnumfeldes, Versorgungsstruktur, soziales Umfeld, Baustrukturtyp, Ortsgebundenheit sowie des Aspektes des Images eines Stadtviertels. Um die Befragten den Sinus-Milieugruppen zuordnen zu können, wird ein Lebensweltsegment-Modell entwickelt, welches den Anspruch hat, die Sinus-Milieugruppen in der Tendenz abzubilden. Die Studie kommt zu dem Ergebnis, dass die Angehörigen der verschiedenen Lebensweltsegmente in jeder Kategorie - wenn auch z.T. auf geringerem Niveau - signifikante Unterschiede in der Bewertung einzelner Wohnstandortpräferenzen aufweisen.
THE INFLUENCE OF THE LOCAL CONCAVITY ON THE FUNCTIONING OF BEARING SHELL OF HIGH-RISE CONSTRUCTION
(2012)
Areas with various defects and damages, which reduce carrying capacity, were examined in a study of metal chimneys. In this work, the influence of the local dimples on the function of metal chimneys was considered. Modeling tasks were completed in the software packages LIRA and ANSYS. Parameters were identified, which characterize the local dimples, and a numerical study of the influence of local dimples on the stress-strain state of shells of metal chimneys was conducted. A distribution field of circular and meridional tension was analyzed in a researched area. Zones of influence of dimples on the bearing cover of metal chimneys were investigated. The bearing capacities of high-rise structures with various dimple geometries and various cover parameters were determined with respect to specified areas of the trunk. Dependent relationships are represented graphically for the decrease in bearing capacity of a cover with respect to dimples. Diameter and thickness of covers of metal chimneys were constructed according to the resulting data.
This thesis explores how architecture aids in the performance of open-ended narratives by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architecture old and new stems from specific cultural and social forms, and is dictated by processes of remembering and forgetting. It is through interaction (between inhabitant and object) that architecture is given innate meanings within an urban environment that makes its role in the interplay one of investigative interest.
To enable the study of this performance, I develop a framework based on various theoretical paradigms to investigate three broad questions: 1) How does one study the performance of memory and forgetting through architecture in dynamic urban landscapes? 2) Is there a way to identify markers and elements within the urban environment that enable such a study? 3) What is the role that urban form plays within this framework and does the transformation of urban form imply the transformation of memory and forgetting?
The developed framework is applied to a macro (an urban level study of Bangalore, India) and micro level study (a singular or object level study of Stari Most/ Old Bridge, Mostar, BiH), to analyse the performance of remembering and forgetting in various urban spheres through interaction with architecture and form. By means of observations, archival research, qualitative mapping, drawings and narrative interviews, the study demonstrates that certain sites and characteristics of architecture enable the performance of remembering and the questioning of forgetting by embodying features that support this act.
Combining theory and empirical studies this thesis is an attempt to elucidate on the processes through which remembering and forgetting is initiated and experienced through architectural forms. The thesis argues for recognising the potential of architecture as one that embodies and supports the performance of memory and forgetting, by acting as an auratic contact zone.
The aim of this paper we discuss explicit series constructions for the fundamental solution of the Helmholtz operator on some important examples non-orientable conformally at manifolds. In the context of this paper we focus on higher dimensional generalizations of the Klein bottle which in turn generalize higher dimensional Möbius strips that we discussed in preceding works. We discuss some basic properties of pinor valued solutions to the Helmholtz equation on these manifolds.
Die Vorstellung des Gesamtwerkes der halleschen Architekten Julius Kallmeyer und Wilhelm Facilides, die sich Anfang der 1920er Jahre zu einer Zusammenarbeit entschlossen und eine Vielzahl interessanter Gebäude für die Saalestadt schufen, ist in der Fokussierung der Gesamtthematik der Lebens- und Werksdarstellung das Grundanliegen dieser Ausarbeitung. Dieses bisher nicht in Angriff genommene architekturgeschichtliche Anliegen beschäftigt sich mit den Ergebnissen der Bürogeschichte einer- und der Lebensgeschichte der Persönlichkeiten andererseits. Bis heute gelten die klassisch modernen Architekturen Kallmeyers & Facilides ́, gerade für den gehobenen Wohnhausbau in Halle an der Saale, als herausragende Leistungen.
Dieses Arbeitspapier beschreibt, wie ausgehend von einem vorhandenen Straßennetzwerk Bebauungsareale mithilfe von Unterteilungsalgorithmen automatisch umgelegt, d.h. in Grundstücke unterteilt, und anschließend auf Basis verschiedener städtebaulicher Typen bebaut werden können. Die Unterteilung von Bebauungsarealen und die Generierung von Bebauungsstrukturen unterliegen dabei bestimmten stadtplanerischen Einschränkungen, Vorgaben und Parametern. Ziel ist es aus den dargestellten Untersuchungen heraus ein Vorschlagssystem für stadtplanerische Entwürfe zu entwickeln, das anhand der Umsetzung eines ersten Softwareprototyps zur Generierung von Stadtstrukturen weiter diskutiert wird.
The process of analysis and design in structural engineering requires the consideration of different partial models, for example loading, structural materials, structural elements, and analysis types. The various partial models are combined by coupling several of their components. Due to the large number of available partial models describing similar phenomena, many different model combinations are possible to simulate the same aspects of a structure. The challenging task of an engineer is to select a model combination that ensures a sufficient, reliable prognosis. In order to achieve this reliable prognosis of the overall structural behavior, a high individual quality of the partial models and an adequate coupling of the partial models is required. Several methodologies have been proposed to evaluate the quality of partial models for their intended application, but a detailed study of the coupling quality is still lacking. This paper proposes a new approach to assess the coupling quality of partial models in a quantitative manner. The approach is based on the consistency of the coupled data and applies for uni- and bidirectional coupled partial models. Furthermore, the influence of the coupling quality on the output quantities of the partial models is considered. The functionality of the algorithm and the effect of the coupling quality are demonstrated using an example of coupled partial models in structural engineering.
Ziel dieser Arbeit ist die Entwicklung von Methoden, mit denen die Prognosequalität von Kriechmodellen des Betons bestimmt werden kann. Die Methoden werden in zwei Ausgangsszenarien unterschieden: die Bewertung ohne und die Bewertung mit Verwendung von spezifischen Versuchsdaten zum Kriechverhalten des Betons. Die Modellqualität wird anhand der Gesamtunsicherheit der prognostizierten Kriechnachgiebigkeit quantifiziert. Die Unsicherheit wird für die Kriechprognose ohne Versuchsdaten über eine Unsicherheitsanalyse unter Berücksichtigung korrelierter Eingangsparameter ermittelt. Bei der Verwendung experimenteller Daten werden die stochastischen Eigenschaften der Modellparameter mittels Bayesian Updating bestimmt. Die Bewertung erfolgt erneut basierend auf einer Unsicherheitsanalyse sowie alternativ mittels Modellselektion nach Bayes.
Weiterhin wird eine auf Graphentheorie und Sensitivitätsanalysen basierende Methode zur Bewertung von gekoppelten Partialmodellen entwickelt. Damit wird der Einfluss eines Partialmodells auf das Verhalten einer globalen Tragstruktur quantifiziert, Interaktionen von Partialmodellen festgestellt und ein Maß für die Qualität eines Gesamtmodells ermittelt.