Refine
Document Type
- Doctoral Thesis (494) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (14)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
- Simulation (10)
- Virtuelle Realität (10)
- Kulturerbe (9)
- Design (8)
- Isogeometrische Analyse (7)
- Tragverhalten (7)
- Zement (7)
- architecture (7)
- BIM (6)
- CAD (6)
- Gips (6)
- Hydratation (6)
- Künstlerische Forschung (6)
- Mikrostruktur (6)
- Stadtforschung (6)
- Stahlbeton (6)
- Architekturtheorie (5)
- China (5)
- Concrete (5)
- Holzbau (5)
- Kriechen (5)
- Kryptologie (5)
- Medienkunst (5)
- Mensch-Maschine-Kommunikation (5)
- NURBS (5)
- Nachhaltigkeit (5)
- Stabilität (5)
- Städtebau (5)
- design (5)
- finite element method (5)
- urban planning (5)
- Alkali-Kieselsäure-Reaktion (4)
- Bauentwurf (4)
- Bauwesen (4)
- Bemessung (4)
- Bruchverhalten (4)
- Building Information Modeling (4)
- Computersimulation (4)
- Deformationsverhalten (4)
- Dynamik (4)
- Entwurf (4)
- Finite Element Method (4)
- Informatik (4)
- Konstruktion (4)
- Landschaft (4)
- Mathematisches Modell (4)
- Medien (4)
- Migration (4)
- Moderne (4)
- Nichtlineare Finite-Elemente-Methode (4)
- Peridynamik (4)
- Planungsprozess (4)
- Porenbeton (4)
- Raum (4)
- Sicherheit (4)
- Siedlung (4)
- Stahlbetonkonstruktion (4)
- Strukturdynamik (4)
- Strukturmechanik (4)
- Tragwerk (4)
- concrete (4)
- Öffentlicher Raum (4)
- Actor-Network-Theory (3)
- Architecture (3)
- Artistic Research (3)
- Baudenkmal (3)
- Baukonstruktion (3)
- Bauphysik (3)
- Bauplanung (3)
- Bauwerk (3)
- Beteiligung (3)
- Biogas (3)
- Brücke (3)
- Computer Supported Cooperative Work (3)
- Computerspiel (3)
- Designforschung (3)
- Dynamische Belastung (3)
- Erdbeben (3)
- Erinnerung (3)
- Erkenntnistheorie (3)
- FEM (3)
- Facility-Management (3)
- Fließmittel (3)
- Fotografie (3)
- Geschichte (3)
- Gestaltoptimierung (3)
- IFC (3)
- Immersion <Virtuelle Realität> (3)
- Information Retrieval (3)
- Informationsmodell (3)
- Informationssystem (3)
- Kooperation (3)
- Kunstharzmodifizierter Zementbeton (3)
- Kunststoffmörtel (3)
- Langzeitverhalten (3)
- Mauerwerk (3)
- Medientheorie (3)
- Mehrskalenmodell (3)
- Mikroskopie (3)
- Modellbildung (3)
- Nachkriegsarchitektur (3)
- Nutzungsänderung (3)
- Objektorientierung (3)
- Optimization (3)
- Peridynamics (3)
- Phasenfeldmodell (3)
- Polymere (3)
- Probabilistik (3)
- Projektmanagement (3)
- Public Private Partnership (3)
- Raumordnung (3)
- Raumwahrnehmung (3)
- Rissbildung (3)
- Sanierung (3)
- Schwinden (3)
- Segregation (3)
- Semiotik (3)
- Stadt (3)
- Stadtsoziologie (3)
- Stahlbau (3)
- Stahlbetonbauteil (3)
- Systemidentifikation (3)
- Technologie (3)
- Tragfähigkeit (3)
- Ultraschall (3)
- Unsicherheit (3)
- Urban studies (3)
- Urbanistik (3)
- Verbund (3)
- Verbundbauweise (3)
- Versionsverwaltung (3)
- Vorspannung (3)
- Waste (3)
- Wohnungsbau (3)
- Wärmebehandlung (3)
- Zuverlässigkeit (3)
- cement (3)
- construction (3)
- durability (3)
- earthquake (3)
- microstructure (3)
- reinforced concrete (3)
- simulation (3)
- stochastic (3)
- system identification (3)
- urban development (3)
- Ästhetik (3)
- Abfall (2)
- Alkalisulfate (2)
- Alterung (2)
- Animation (2)
- Architektur / Geschichte (2)
- Architektur / Ästhetik (2)
- Argumentation (2)
- Batterie (2)
- Bauantrag (2)
- Bauaufnahme (2)
- Baubetrieb (2)
- Bauchemie (2)
- Bauforschung (2)
- Baugenehmigung (2)
- Bauklimatik (2)
- Baustoff (2)
- Bauteil (2)
- Bauwerkslebenszyklus (2)
- Bauwerksmodell (2)
- Bauökologie (2)
- Beleuchtung (2)
- Benutzerfreundlichkeit (2)
- Benutzeroberfläche (2)
- Berechnung (2)
- Berechnungsverfahren (2)
- Betonverflüssiger (2)
- Betonzusatzmittel (2)
- Bodenunruhe (2)
- Brand Management (2)
- Branding (2)
- Brazil (2)
- Brettschichtholz (2)
- Bruch (2)
- Bruchmechanik (2)
- Brückenbau (2)
- Building Information Model (2)
- Building application (2)
- Built environment (2)
- CAAD (2)
- Calciumsulfat (2)
- Cement (2)
- Computer Graphics (2)
- Computer-Aided Design (2)
- Creep (2)
- Datenmodell (2)
- Dauerhaftigkeit (2)
- Decision-making (2)
- Denkmal (2)
- Digitalisierung (2)
- Diskontinuumsmechanik (2)
- Dokumentarfilm (2)
- Eigenspannung (2)
- Elastizitätsmodul (2)
- Energiebedarf (2)
- Energiedissipation (2)
- Energieverbrauch (2)
- Energiewende (2)
- Entrepreneurship (2)
- Entscheidungsmodell (2)
- Entwicklungsländer (2)
- Experiment (2)
- Extremalprinzip (2)
- Facility Management (2)
- Faltung (2)
- Film (2)
- Finnland (2)
- Formänderungsenergie (2)
- Fotografie als Handlung (2)
- Fracture (2)
- Fracture mechanics (2)
- Frankreich (2)
- Frost (2)
- Gashochdruckleitungen (2)
- Generierung (2)
- Geschwindigkeitsverteilung (2)
- Glasfaserverstärkter Kunststoff (2)
- Globalisierung (2)
- Großtafelbau (2)
- HBV (2)
- Hausforschung (2)
- Holz (2)
- Holz-Beton-Verbund (2)
- Human-Computer Interaction (2)
- Hybridbauweise (2)
- Hydrodynamik (2)
- Immobilienmanagement (2)
- Imperfektion (2)
- Industriekultur (2)
- Infrastruktur (2)
- Infrastrukturgeschichte (2)
- Innovation (2)
- Innovationsmanagement (2)
- Integration (2)
- Internet (2)
- Inventarisierung (2)
- Kationenaustausch (2)
- Keramik (2)
- Kleben (2)
- Klimaschutz (2)
- Klimaänderung (2)
- Kollektives Gedächtnis (2)
- Kommunikation (2)
- Konservierung (2)
- Kontinuumsmechanik (2)
- Korrosion (2)
- Kultur (2)
- Kulturdenkmal (2)
- Kunststoffadditiv (2)
- Langzeittragverhalten (2)
- Linearelastische Bruchmechanik (2)
- Loos (2)
- Machine Learning (2)
- Manifest (2)
- Manifesto (2)
- Marke (2)
- Marketing (2)
- Media (2)
- Medienphilosophie (2)
- Medienwissenschaft (2)
- Medium (2)
- Mehrgitterverfahren (2)
- Mehrphasensystem (2)
- Mehrskalenanalyse (2)
- Mensch-Maschine-Interaktion (2)
- Modell (2)
- Monte-Carlo-Simulation (2)
- Multi-User Virtual Reality (2)
- Multiscale modeling (2)
- Mörtel (2)
- Nanoverbundstruktur (2)
- Narrativität (2)
- Navigation (2)
- Neuronales Netz (2)
- Nichtlineare Mechanik (2)
- Nichtlineare Optimierung (2)
- Numerische Mathematik (2)
- Numerisches Verfahren (2)
- Oberflächenbeschreibung (2)
- Oberflächenstruktur (2)
- Organische Architektur (2)
- Ornament (2)
- Parametric Design (2)
- Partielle Differentialgleichung (2)
- Partizipation (2)
- Performative Fotografie (2)
- Performativität (2)
- Phase-field modeling (2)
- Philosophie (2)
- Phänomenologie (2)
- Platte (2)
- Plausibilität (2)
- Porosität (2)
- Process management (2)
- Project management (2)
- Prozessmanagement (2)
- Quelldruck (2)
- Quellen (2)
- Rauheitsparameter (2)
- Rauigkeit (2)
- Recycling (2)
- Rezeption (2)
- Rezeptionssteuerung (2)
- Rice husk ash (2)
- Risikomanagement (2)
- Sauerstoff (2)
- Schaden (2)
- Schale (2)
- Scheduling (2)
- Schloss (2)
- Schlüssel (2)
- Schubbewehrung (2)
- Schubtragfähigkeit (2)
- Schule (2)
- Sensitivitätsanalyse (2)
- Shape Optimization (2)
- Software (2)
- Stadtbild (2)
- Stadtmarketing (2)
- Stadtsanierung (2)
- Stadtumbau (2)
- Staumauer (2)
- Steifigkeit (2)
- Stochastik (2)
- Straßenquerschnitt (2)
- Straßenverkehr (2)
- Strömungswiderstand (2)
- Suburbanisierung (2)
- Suffosion (2)
- Systementwurf (2)
- Tachymetrie (2)
- Technikgeschichte (2)
- Terminplanung (2)
- Thüringen (2)
- Tomographie (2)
- Tricalcium silicate (2)
- Umbau (2)
- Unbewegliche Sache (2)
- Uncertainty (2)
- Unsicherheitsanalyse (2)
- Urban Planning (2)
- Urbanität (2)
- Variational principle (2)
- Variationsprinzip (2)
- Verkehrspolitik (2)
- Verstädterung (2)
- Verteiltes System (2)
- Vesikel (2)
- Virtual Reality (2)
- Virtualität (2)
- Visualisierung (2)
- Wahrnehmung (2)
- Wavelet (2)
- Welt (2)
- Werkstoffkunde (2)
- Windenergie (2)
- Wirklichkeit (2)
- Wirkungsmechanismen (2)
- Wissenschaft / Geschichte (2)
- Wissenschaftsgeschichte <Fach> (2)
- Wohnen (2)
- XFEM (2)
- Zementbeton (2)
- Zementhydratation (2)
- Zementstein (2)
- Zerstörungsfreie Werkstoffprüfung (2)
- Zivilgesellschaft (2)
- Zusatzmittel (2)
- Zuverlässigkeitstheorie (2)
- art (2)
- bond (2)
- building life cycle (2)
- collaboration (2)
- continuum mechanics (2)
- cooperation (2)
- crack (2)
- cracking (2)
- damage (2)
- dynamics (2)
- fatigue (2)
- gypsum (2)
- heritage (2)
- history of science (2)
- industrial building (2)
- innovation (2)
- mathematical programming (2)
- modelling (2)
- multiphase (2)
- multiscale (2)
- nanocomposite (2)
- optimization (2)
- public space (2)
- scheduling (2)
- shrinkage (2)
- social housing (2)
- socialist city (2)
- sustainability (2)
- swelling (2)
- timber-concrete composite (2)
- town planning (2)
- urban history (2)
- urban regeneration (2)
- urban studies (2)
- urbanism (2)
- velocity distribution (2)
- versioning (2)
- virtual reality (2)
- Ägypten (2)
- Öffentlichkeit (2)
- Ökobilanz (2)
- 0947 (1)
- 0948 (1)
- 0949 (1)
- 1980/90 (1)
- 2+1-roads (1)
- 2D/3D Adaptive Mesh Refinement (1)
- 3D (1)
- 3D Interaction Techniques (1)
- 3D Telepresence (1)
- 3D User Interfaces and Interaction Techniques (1)
- 40 °C Nebelkammer (1)
- 4D (1)
- 4D-Simulation (1)
- 5 (1)
- 56.62 (1)
- 56.81 (1)
- 60 °C-Betonversuch über Wasser (1)
- 80er und 90er Jahre (1)
- AES-192 (1)
- AES-256 (1)
- AI, computational thinking (1)
- ANTROPOLOGÍA (1)
- ARIA (1)
- ASR (1)
- ATZ (1)
- Abaqus (1)
- Abbiegespur (1)
- Abbinderegler (1)
- Abfallwirtschaftsplan (1)
- Abfälle (1)
- Abjekt (1)
- Ablauf (1)
- Abstandsmessung (1)
- Abwasser (1)
- Acceleration (1)
- Accesible (1)
- Acoustic Travel-Time Tomography (1)
- Adaptive central high resolution schemes (1)
- Adaptives System (1)
- Adaptives Verfahren (1)
- Adaptivität (1)
- Adhäsion (1)
- Adolf (1)
- Advanced Encryption Standard (1)
- Aerodynamic Stability (1)
- Aerodynamics (1)
- Aerodynamik (1)
- Aeroelastic energy harvesting (1)
- Aeroelastic instabilities (1)
- Aeroelasticity (1)
- Aeroelastizität (1)
- Affekt (1)
- Agoraphobie (1)
- Agrarprodukt (1)
- Air Conditioning (1)
- Akkumulator (1)
- Akteur-Netzwerk-Theorie (1)
- Aktive Integration (1)
- Akutkrankenhaus (1)
- Alexandria (1)
- Algen (1)
- Algorithmus (1)
- Alkali silica reaction (1)
- Alkali-Carbonat-Reaktion (1)
- Alkali-Kieselsäure-Gel (1)
- Alkali-Kieselsäure-Reaktion; Fahrbahndecken; Flugbetriebsflächen; äußere Alkalizufuhr; Enteisungsmittel; Natriumchlorid; Alkaliacetate; Alkaliformiate; AKR-Performance-Prüfung; FIB-Klimawechsellagerung (1)
- Alkali-silica reaction (1)
- Alkalilösliche Kieselsäure (1)
- Alkalisulfat (1)
- Alltäglichkeit (1)
- Altbau (1)
- Altbaumodernisierung (1)
- Altern / Prävention (1)
- Alterungsbeständigkeit (1)
- Alterungsdihydrat (1)
- Altstadt (1)
- Altstadtsanierung (1)
- Ambiguität (1)
- Ammonium-Ton (1)
- Anachronismus (1)
- Analytical Solution (1)
- Analytische Lösung (1)
- Anhydrit III (1)
- Anisotropie (1)
- Ankergeschäft (1)
- Anomale Dispersion (1)
- Anorganische Salze (1)
- Anpassung (1)
- Anschauung (1)
- Anschluss (1)
- Anthologie (1)
- Anthology (1)
- Antwortflächenverfahren (1)
- App (1)
- Apparatgeist-Theorie (1)
- Patent Application (1)
- Arabische Altstadt (1)
- Arabischer Frühling (1)
- Arbeitsplanung (1)
- Arbeitsschutz (1)
- Arbeitsunfall (1)
- Architectual lighting (1)
- Architectural Theory (1)
- Architecture Theory (1)
- Architektur / Gesch (1)
- Architektur / Soziologie (1)
- Architektur der Moderne (1)
- Architekturgeschichte (1)
- Architekturgeschichte Shanghai (1)
- Architekturgeschichtsschreibung (1)
- Architekturwettbewerb (1)
- Argumentation Strategies (1)
- Aridisierung (1)
- Arman (1)
- Arrangements (1)
- Art (1)
- Art History (1)
- Art Projects (1)
- Art Sociology (1)
- Art-Mods (1)
- Artefakt (1)
- Artek (1)
- Artificial Intelligence (1)
- Artificial coral reefs (1)
- Asbestbelastung (1)
- Asbestsanierung (1)
- Asynchronität (1)
- Atmosphäre (1)
- Atomindustrie (1)
- Audio-Walk (1)
- Audioführung (1)
- Audiovision (1)
- Audiowalk (1)
- Auditory Awareness (1)
- Aufführung (1)
- Aufkohlung <Metallurgie> (1)
- Aufmaß (1)
- Aufstellstreifen (1)
- Aufwindkraftwerk (1)
- Augmented Audio Reality (1)
- Augmented Reality Displays (1)
- Ausbreitung (1)
- Ausbreitungsvorgänge (1)
- Ausdruck (1)
- Ausgleichsrechnung (1)
- Ausgleichung (1)
- Auslaugung (1)
- Aussteifungssystem (1)
- Ausstellung (1)
- Ausstellungshallen (1)
- Ausstellungstheorie (1)
- Auswahlpolitik von AV-Dokumenten (1)
- Auswirkung (1)
- Ausziehversuch (1)
- Authentifizierte Verschlüsselung (1)
- Autobahn (1)
- Autobahnarbeitsstellen (1)
- Autoclaved Aerated Concrete (1)
- Autoclaved Aerated Conrete (1)
- Autofrettage (1)
- Autogenous (1)
- Autoklav (1)
- Autokorrelationslänge (1)
- Autokratie (1)
- Autonomous (1)
- Autorschaft (1)
- Außenwand (1)
- Awareness (1)
- B-Spline (1)
- B-Spline Finite Elemente (1)
- B-spline (1)
- BDA (1)
- BMOM-Raum (1)
- BOT projects (1)
- BSCF (1)
- BTF (1)
- Barrierefreiheit (1)
- Basic sets of polynomials (1)
- Battery (1)
- Battery development (1)
- Bau-Ist (1)
- Bauablauf (1)
- Bauablaufplan (1)
- Bauablaufplanung (1)
- Bauarbeit (1)
- Bauarchäologie in Wohngebäuden der Stadt Meißen (1)
- Bauauftragsrechnung (1)
- Bauausführung (1)
- Bauen im Bestand (1)
- Bauen mit Kunststoffen (1)
- Bauernhaus (1)
- Bauform (1)
- Baugeschichte (1)
- Baugrundmodell (1)
- Baugrundverbesserung (1)
- Bauinformatik (1)
- Baukastensystem (1)
- Bauleistungsfeststellung (1)
- Baumangel (1)
- Bauprozess (1)
- Bauschaden (1)
- Bausoll (1)
- Baustein (1)
- Baustelle (1)
- Baustreitigkeiten (1)
- Bautechnik (1)
- Bauverwaltung (1)
- Bauwerksinformationsmodell (1)
- Bauwerksmodellierung (1)
- Bauwirtschaft (1)
- Bayes (1)
- Bayes neuronale Netze (1)
- Bayes-Entscheidungstheorie (1)
- Bayes-Inferenz (1)
- Bayesian Inference, Uncertainty Quantification (1)
- Bayesian method (1)
- Bayesian model updating (1)
- Bayesian neural networks (1)
- Bayesische Modelaktualisierung (1)
- Bayes’schen Inferenz (1)
- Bayreuth / Festspielhaus (1)
- Bearbeitung von Ingenieuraufgaben (1)
- Bedarfsermittlung (1)
- Befinden (1)
- Behelfsverkehrsführungen (1)
- Behindertengerechtes Bauen (1)
- Behinderter (1)
- Behälter (1)
- Beilegung (1)
- Belastungsversuch (1)
- Beleuchtungsstärkemessungen (1)
- Belit (1)
- Belüftung (1)
- Bemessungsverfahren (1)
- Benjamin (1)
- Bentonit (1)
- Bentonit-Sand (1)
- Bentonit-Sandgemische (1)
- Bentonite-sand (1)
- Benut (1)
- Benutzererlebnis (1)
- Benutzerorientierung (1)
- Benutzerschnittstellen (1)
- Benutzerschnittstellenentwurfssystem (1)
- Beobachter (1)
- Berlin (1)
- Berlin / Ausstellung Exil (1)
- Berufsschule (1)
- Berührungsfläche (1)
- Beschichtung (1)
- Beschleuniger (1)
- Beschädigung (1)
- Besov spaces (1)
- Besov-Räume (1)
- Bestandsmaßnahmen (1)
- Beteiligungsforschung (1)
- Betonbau (1)
- Betonschaden (1)
- Betonsteinherstellung (1)
- Betonverarbeitung (1)
- Betonzusatz (1)
- Betonzuschlag (1)
- Betriebswirtschaft (1)
- Beugungsgitter (1)
- Beulung (1)
- Beweisbare Sicherheit (1)
- Bewertung (1)
- Bewertungsmethode (1)
- Bewusstsein (1)
- Biegetheorie (1)
- Biegezugbelastung (1)
- Bild (1)
- Bild-Autorenschaft (1)
- Bilderkennung (1)
- Bildqualität (1)
- Bildtheorie (1)
- Bildwissenschaft (1)
- Bimanual Interaction (1)
- Bimomente (1)
- Bindemittel-Boden-Säulen (1)
- Bindiger Boden (1)
- BioArt (1)
- Biogasanlage (1)
- Biogasproduktion (1)
- Biomass (1)
- Biomass Technology (1)
- Biomasse (1)
- Biomechanics (1)
- Biomechanik (1)
- Biotechnologie (1)
- Blasenschleier (1)
- Bleilochtalsperre (1)
- Blitzableiter (1)
- Blitzschutzanlage (1)
- Bloch space (1)
- Bloch-Raum (1)
- Blockchiffre (1)
- Blockchiffrenbasierte Hashfunktion (1)
- Blockcipher Based Hashing (1)
- Bluetooth tracking (1)
- Boden (1)
- Boden-Bauwerk-Wechselwirkung (1)
- Bodenaggressivität (1)
- Bodenfilter (1)
- Bodenverbesserung <Bauwesen> (1)
- Body (1)
- Bogotá (1)
- Boltanski, Christian (1)
- Boltanski, Christian; Faltung; Feldmann, Hans-Peter; Künstlerbuch; Van de Velde, Henry (1)
- Boundary Element Method (1)
- Brand (1)
- Brandenburg (1)
- Brandschutz (1)
- Brasilien (1)
- Brechzahländerung (1)
- Brettstapel (1)
- Brettstapelbau (1)
- Bridge (1)
- Bridges (1)
- Brikettierung (1)
- Briquette Production (1)
- Briquetting (1)
- Britain (1)
- Bruchkriterien (1)
- Bruchzähigkeit (1)
- Brustkorb (1)
- Buch (1)
- Buch; Buchkunst; Falte; Ornament; Papier (1)
- Buchdruck (1)
- Buchgestaltung (1)
- Buchkunst (1)
- Budgetierung (1)
- Building Information Modelling (1)
- Building Modelling (1)
- Building Permit (1)
- Building modelling (1)
- Building permit (1)
- Building representation (1)
- Building surveying (1)
- Bunker (1)
- Business Development (1)
- Bühnenbild (1)
- Bürgerbeteiligung (1)
- C-S-H Phasen (1)
- C-S-H phases (1)
- CAD-Systems (1)
- CAO (1)
- CDF-Verfahren (1)
- CET (1)
- CFD (1)
- CFRP (1)
- CO2 (1)
- COM (1)
- CSCW (1)
- CSMF (1)
- Calcinieren (1)
- Calciumsulfat-Halbhydrat (1)
- Calciumsulfatbindemittel (1)
- Camera Calibration (1)
- Camera Obscura (1)
- Capsular clustering; Design of microcapsules (1)
- Carbon nanotubes (1)
- Carl Heinrich Ferdinand Streichhan (1)
- Cassirer (1)
- Category Theory (1)
- Central and Eastern Europe (1)
- Child Friendly Cities Initiative (1)
- Chile (1)
- Chinese rural clan settlement (1)
- Christo (1)
- Citizen participation (1)
- City (1)
- City Marketing (1)
- City marketing (1)
- Clan (1)
- Clifford-Algebra (1)
- Clifford-Analysis (1)
- Cluster-Analyse (1)
- Co-operative Work (1)
- Co-production (1)
- Cognition (1)
- Cohesive surface technique (1)
- Collaboration (1)
- Collaborative Virtual Environments (1)
- Collective Listening (1)
- Commercial Architecture (1)
- Communicative memory (1)
- Community (1)
- Comparative History (1)
- Complex Systems (1)
- Complexation (1)
- Computational Argumentation (1)
- Computational Fluid Dynamics (1)
- Computational contact mechanics (1)
- Computational fracture modeling (1)
- Computational modelling (1)
- Computational wind engineering (1)
- Computer (1)
- Computer Game (1)
- Computer Supported Collaborative Work (1)
- Computer Supported Cooperative Learning (1)
- Computer aided architectural design (1)
- Computer model (1)
- Computer science (1)
- Computer-assisted building surveying (1)
- Computergeschichte (1)
- Computergraphik (1)
- Computermodellierung des Bruchverhaltens (1)
- Computermodul (1)
- Computervermitteltes Arbeiten (1)
- Computervermitteltes Lernen (1)
- Concrete catenary pole (1)
- Conformity Assessment (1)
- Conservation (1)
- Construction (1)
- Construction Product data (1)
- Construction Sector (1)
- Constructive Design (1)
- Constructive Optimisation (1)
- Container (1)
- Containerisierung (1)
- Containerization (1)
- Content <Internet> (1)
- Content Management (1)
- Content-bases Image retrieval (1)
- Continuous-Time Markov Chain (1)
- Continuum Mechnics (1)
- Control system (1)
- Controlling (1)
- Cordoba (1)
- Corruption (1)
- Cost-Benefit Analysis (1)
- Coupled models (1)
- Coupled numerical methods (1)
- Cross-Section Distortion (1)
- Cross-Section Warping (1)
- Cryogenic Suction (1)
- Cryptanalysis (1)
- Cryptography (1)
- Cultural memory (1)
- Cultural tourism (1)
- Curved thin-walled circular pipes (1)
- Customizing (1)
- Cylinder-Axle-Model (1)
- Czechoslovakia (1)
- Damage (1)
- Damage Identification (1)
- Damage identification (1)
- Damage mechanism (1)
- Dams (1)
- Darstellungssatz von Goursat (1)
- Das @Erhabene (1)
- Das Unheimliche (1)
- Data (1)
- Data Mining (1)
- Data exchange, Schema mapping, Quality assessment, Uncertainty, Coupling, BIM, Design patterns, Metamodel architecture (1)
- Data-driven (1)
- Daten (1)
- Datenaustausch (1)
- Datenbank (1)
- Datenbanken (1)
- Datenkompetenz (1)
- Dauerfestigk (1)
- Dauerstandfestigkeit (1)
- Daylight control systems (1)
- Deal ii C++ code (1)
- Deammonisierung (1)
- Decision Making (1)
- Deck cross-sections (1)
- Deep Energy Method (1)
- Deep Soil Stabilization (1)
- Defekt (1)
- Deformation (1)
- Deformationsmessung (1)
- Dehnwellenresonanz (1)
- Delamination (1)
- Demographie (1)
- Demokratie (1)
- Denkmalkunde (1)
- Denkmalschutz (1)
- Denkmalwerte (1)
- Deponiebau (1)
- Depth Camera (1)
- Design Science (1)
- Design, UX, Human-Centered-Design (1)
- Designgeschichte (1)
- Designing Urban National Memory (1)
- Desktop (1)
- Desktop-VR-Interface (1)
- Destratifikation (1)
- Deutsche Mediathek (1)
- Deutschland (1)
- Developing Countries (1)
- Developing countries (1)
- Development (1)
- Dictatorship (1)
- Dienstliegenschaft (1)
- Differentielle Kryptoanalyse (1)
- Differenzenpotentiale (1)
- Digital Health (1)
- Digital Humanities (1)
- Digital technologies (1)
- Digital video compositing ; video projection ; digital video composition techniques (1)
- Digitale Archive (1)
- Digitale Fotografie (1)
- Ding (1)
- Dingdiskurs (1)
- Direkte numerische Simul (1)
- Direkte numerische Simulation (1)
- Discrete function theory (1)
- Discrete fundamental solution (1)
- Discrete potential theory (1)
- Diskrete Fourier-Transformation (1)
- Diskrete Fundamentallösung (1)
- Diskrete Funktionentheorie (1)
- Diskrete Potentialtheorie (1)
- Diskrete-Elemente-Methode (1)
- Disparitäten (1)
- Dispersion <Welle> (1)
- Dispersionskeramik (1)
- Display (1)
- Display Technoloy, Collaboration, Virtual Reality (1)
- Dispute Resolution (1)
- Dispute Resolution Model (1)
- Dissertation (1)
- Distributed computing (1)
- Dokumentation (1)
- Domain Models (1)
- Domänenmodelle (1)
- Dramaturgie (1)
- Drehrohr (1)
- Dreidimensionale Comp (1)
- Dreistreifige Landstraße (1)
- Druckbelastung (1)
- Druckglied (1)
- Durchströmung (1)
- Dynamic Analysis (1)
- Dynamic Model Management Systems (1)
- Dynamic Schema Evolution (1)
- Dynamische Analyse (1)
- Dynamische Messungen (1)
- Dynamische Modellverwaltungssysteme (1)
- Dynamische Schemaevolution (1)
- Dörfer (1)
- Dübelleiste (1)
- E-Learning (1)
- E-Modul (1)
- E-modulus (1)
- ECOLOGÍA POLÍTICA (1)
- ERP (1)
- ESTUDIOS URBANOS (1)
- Ebener Dehnungszustand (1)
- Ecology in design (1)
- Editor (1)
- Effizienz (1)
- Effizienzmessung (1)
- Egypt (1)
- Eignungstest (1)
- Eija-Liisa Ahtila (1)
- Einkaufszentrum (1)
- Einsatzhärten (1)
- Einwanderer (1)
- Einzelhandel (1)
- Einzellast (1)
- Eisenbahn (1)
- Eisenman (1)
- Ekel (1)
- Electrochemical properties (1)
- Electronic Learning (1)
- Elektrifizierung (1)
- Elektrische Energie (1)
- Elektriziätsgeschichte (1)
- Elektrochemische Eigenschaft (1)
- Elektrode (1)
- Elektrodenmaterial (1)
- Elektromechanik (1)
- Elektropolis (1)
- Elementanalyse (1)
- Emblem (1)
- Emigration to China (1)
- Emotion (1)
- Empirische Sozialforschung (1)
- Encryption (1)
- Energie und Brandschutz (1)
- Energieeffizienz (1)
- Energieerzeugung (1)
- Energiekosten (1)
- Energiemethoden (1)
- Energiepreis (1)
- Energiespeichersystem (1)
- Energietransport (1)
- Energiewirtschaft (1)
- Energieübertragung (1)
- Energy-dissipation (1)
- Enteisungsanlage (1)
- Enterprise Resource Planning (1)
- Entity-Relationship-Datenmodell (1)
- Entrepreneurial Orientation (1)
- Entscheidung (1)
- Entscheidungsbegründung (1)
- Entscheidungshilfemodell (1)
- Entscheidungsträger (1)
- Entscheidungsverhalten (1)
- Entstalinisierung (1)
- Entwicklung frühneuzeitlichen Wohnens in Sachsen (1)
- Entwurf von Mikrokapseln (1)
- Entwurfsmethoden (1)
- Entwurfsmethodik (1)
- Entwurfssystem (1)
- Environment (1)
- Environmental Art (1)
- Environmental studies (1)
- Epistemology (1)
- Epizentrendichte (1)
- Erdbebenbelastung (1)
- Erdbebengefährdung (1)
- Erdbebenschaden (1)
- Erdbebensicherheit (1)
- Erdrutsch (1)
- Ereignisgesteuerte Prozeßkette (1)
- Erfahrungswissen (1)
- Ergebnisorientierte Steuerung (1)
- Erhärtungsprüfung (1)
- Erlebnis (1)
- Ermüdung (1)
- Ermüdung b (1)
- Ermüdung bei hohen Lastspielzahlen (1)
- Ernst (1)
- Error estimation (1)
- Ersatzbrennstoffe (1)
- Erschliessungsstrategien (1)
- Ertüchtigung (1)
- Erweiterte Finite-Elemente-Methode (1)
- Erweiterte Realität (1)
- Erweiterte Realität <Informatik> (1)
- Erzählung (1)
- Ethiopia (1)
- Ethnografie (1)
- Ethnographie (1)
- Ethnography (1)
- Ethnologie (1)
- Ettringit (1)
- European Urban Studies (1)
- European city-making process (1)
- Evaluation methods (1)
- Event-driven Process Chain (1)
- Evolutionäre Algorithmen (1)
- Experimentalfilm (1)
- Experimente (1)
- Experimentelle Architektur (1)
- Explorative Suche (1)
- Expressionismus (1)
- Extradisziplinarität (1)
- Eye Typing (1)
- Eye tracking movement (1)
- FIB-Klimawechsellagerung (1)
- FM-Leistungserbringung (1)
- FVK (1)
- Facilides (1)
- Fallbasiertes Schließen (1)
- Fallbeispiel (1)
- Falte (1)
- Faseroptischer Sensor (1)
- Faserverbundschalentragwerk (1)
- Fashion studies (1)
- Fehlerfortpflanzung (1)
- Fehlstellenmodell (1)
- Feinkornbaustahl (1)
- Feldhaus (1)
- Feldmann, Hans-Peter (1)
- Feminismus (1)
- Fernsehserie (1)
- Ferri (1)
- Fertighausbau (1)
- Festbett (1)
- Festigkeit (1)
- Festkörpermechanik (1)
- Festmörtel (1)
- Feuer (1)
- Fiber Reinforced Composite (1)
- Filling moulds with fresh concrete (1)
- Filmproduktion (1)
- Filmtheater (1)
- Filter (1)
- Finite Element (1)
- Finite Element Analysis (1)
- Finite Element Model (1)
- Finite Elemente Methode (1)
- Finite-Differenzen-Methode (1)
- Finite-Volumen-Methode (1)
- Finland (1)
- Flattern (1)
- Flexoelectricity (1)
- Fließgewässer (1)
- Fließverhalten (1)
- Florianópolis (1)
- Flucht und Emigration Europäischer Künstler 1933-1945 <1998> (1)
- Fluid-Structure Interaction (1)
- Flussgebiet (1)
- Flutter (1)
- Flächenverbund (1)
- Flüssigkeit-Bauwerk-Interaktion (1)
- Flüssigkeitsviskosität (1)
- Food Waste Management (1)
- Form (1)
- Form optimization (1)
- Formabweichung (1)
- Formgedächtnis (1)
- Formoptimierung (1)
- Forschung (1)
- Fotografisches Handlungsgefüge (1)
- Fourier (1)
- Fourier-Reihe (1)
- Fracking (1)
- Fracture Computational Model (1)
- Fracture Toughness (1)
- Fragmentierung (1)
- Fraktographie (1)
- Frankfurt <Main> / Dezernat Umwelt (1)
- Franklin (1)
- Franz Maria (1)
- Freeform (1)
- Freiform (1)
- Freistrahlen (1)
- Frischmörtel (1)
- Frost-Tau-Widerstand (1)
- Frost-Tausalz-Angriff (1)
- Frost-Tausalz-Widerstand (1)
- Frostbeständigkeit (1)
- Frostwiderstand (1)
- Frühe Neuzeit (1)
- Fuge (1)
- Full waveform inversion (1)
- Fuller, Richard Buckminster (1)
- Functional design (1)
- Functionally Graded Materials (1)
- Funktionale Privatisierung (1)
- Funktionalismus <Architektur> (1)
- Funktionenraum (1)
- Funktionentheorie (1)
- Fuzzy logic (1)
- Fuzzy-Logik (1)
- Fügen (1)
- Füllen der Form mit Frischbeton (1)
- GDR (1)
- GFK (1)
- GFRP (1)
- GIXRD (1)
- Gabellagerung (1)
- Games (1)
- Gartenstadt (1)
- Gartenvorort (1)
- Gasleitung (1)
- Gated Communities (1)
- Gaze Control (1)
- Gaze Interaction (1)
- Gebäude (1)
- Gebäudeabbild (1)
- Gebäudedaten-Modellierung (1)
- Gebäudeplanung (1)
- Gebäudesimulation ESP-r (1)
- Gefährdung (1)
- Gefüge <Werkstoffkunde> (1)
- Gefühl (1)
- Geheimdienst (1)
- Geiger-Müller-Zählrohr (1)
- Geigerzähler (1)
- Gekoppelte Modelle (1)
- Gemeinschaftsgarten (1)
- General Plan (1)
- Generalized Beam Theory (GBT) (1)
- Generalized Bean Theory (1)
- Geographischer Raum (1)
- Geoinformationssystem (1)
- Geometric Modeling (1)
- Geometric Partial Differential Equations (1)
- Geometrically nonlinear analysis (1)
- Geometrische Modellierung (1)
- Geometry Independent Field Approximation (1)
- Geostatistik (1)
- Geotechnik (1)
- Geotextilien (1)
- Geriatic (1)
- Geriatrie (1)
- Gerichtsentscheidung (1)
- Germany (1)
- Geschichte des Computing (1)
- Geschichte: 1848-1884 (1)
- Geschichte> (1)
- Geschichtsschreibung (1)
- Geschlossene Gesellschaft (1)
- Geschlossener Immobilienfonds (1)
- Geschossbau (1)
- Geschwindigkeit (1)
- Geschwindigkeitsmessung (1)
- Gestaltung (1)
- Gestaltungsrahmen (1)
- Gestaltungsrichtlinien (1)
- Gesteinskörnung (1)
- Gesteinskörnungen (1)
- Gesteinskörnungssubstitutionsmaterial (1)
- Gewebeverbundwerkstoff (1)
- Gewässersanierung (1)
- Ghadames (1)
- Gilles Deleuze (1)
- Gips-Zement-Puzzolan-Bindemittel (1)
- Gipstreiben (1)
- Gitterfreie Methode (1)
- Glas (1)
- Glass (1)
- Gleisanlage (1)
- Gleisdynamik (1)
- Globalgeschichte (1)
- Globalisierung <Geschichte> (1)
- Glue Spall (1)
- Goal-oriented A Posteriori Error Estimation (1)
- Graffiti (1)
- Graffito (1)
- Grafikdesign (1)
- Grand duchy Saxony-Weimar-Eisenach (1)
- Graphentheorie (1)
- Graphics hardware (1)
- Graphische Benutzeroberfläche (1)
- Grauguss (1)
- Greater Shanghai (1)
- Greensche Matrix (1)
- Grenzlast (1)
- Grenzzustand (1)
- Grenzzustandsanalyse (1)
- Grindahl (1)
- Grounded theory (1)
- Group Navigation (1)
- Groupware (1)
- Großbritannien (1)
- Großprojekt (1)
- Großsiedlung (1)
- Großtafelbauweise (1)
- Grundlagenkrise (1)
- Grundrisstypologie historischer Wohngebäude (1)
- Gruppenbewusstsein (1)
- H/V-Methode (1)
- HAS-160 (1)
- HISTORIA (1)
- HISTORIA AMBIENTAL (1)
- HPC (1)
- Haftverbund (1)
- Hakim (1)
- Hakim Madi (1)
- Halle (1)
- Handel (1)
- Handelsarchitektur (1)
- Handy (1)
- Hanoi (1)
- Hans Poelzig . Architekturgeschichte der DDR (1)
- Hash-Algorithmus (1)
- Hate Speech (1)
- Haufwerksporiger Beton (1)
- Hausformenwandel (1)
- Haushaltsrecht (1)
- Hauspflege (1)
- Healing (1)
- Hedonic Consumption (1)
- Heilungseffekt (1)
- Helmholtz Acoustic Problems (1)
- Heritage (1)
- Heritage management (1)
- Hermann (1)
- Heterotopie (1)
- Hetzer (1)
- Heuristik (1)
- High precision underwater monitoring (1)
- High-speed railway bridge (1)
- Historical Sociology (1)
- Historische Altstadt (1)
- Historische Gebäude (1)
- Historische Kulturlandschaft (1)
- Historische Soziologie (1)
- Historischer Film (1)
- Historismus (1)
- History (1)
- History of Electricity (1)
- Hochdruck (1)
- Hochofenzement (1)
- Holomorphe Funktion (1)
- Holzbauteil (1)
- Holzkonstruktion (1)
- Holzleimbau (1)
- Holzrahmenbau (1)
- Holzrahmenbauwände (1)
- Holzstützen (1)
- Holztafelbau (1)
- Holzverbindung (1)
- Homogeneity (1)
- Homogenisieren (1)
- Homogenisierung (1)
- Homogenität (1)
- Hospiz (1)
- Hotel- und Kasinoarchitektur (1)
- Housing (1)
- Human Computer Interaction (1)
- Human-Computer Interaction (HCI) (1)
- Human-Computer-Interaction (1)
- Human-centered Design (1)
- Human-machine communication (1)
- Hungary (1)
- Hybridization (1)
- Hydratationswärme (1)
- Hydration and microstructure (1)
- Hydrauliche Bindemittel (1)
- Hydraulik (1)
- Hydraulischer Grundbruch (1)
- Hydromechanik (1)
- Hydrothermalsynthese (1)
- Hyperbolic PDEs (1)
- Hyperkomplexe Funktion (1)
- Hypertrophie (1)
- Hüftgelenkprothese (1)
- INA (1)
- Iannis Xenakis (1)
- Identifikation (1)
- Ikonographie (1)
- Illuminance of tropical sky (1)
- Illusion (1)
- Illustration (1)
- Illustriertes Buch (1)
- Image (1)
- Imagination (1)
- Immaterielles Kulturerbe (1)
- Immersion (1)
- Immobilie (1)
- Immobilien-Lebenszyklusansatz (1)
- Immobilienfonds (1)
- Immobilieninvestor (1)
- Immobilienwirtschaft (1)
- Impact (1)
- Impedanzfunktion (1)
- Imre (1)
- Incompressibility (1)
- Indikator (1)
- Individual Sociology (1)
- Individuelle Planung (1)
- Indonesia (1)
- Industrie (1)
- Industrie 4.0 (1)
- Industrie- und Verkehrsbauten (1)
- Industrielles Bauen (1)
- Industry Foundation Classes (IFC) (1)
- Inertgas (1)
- Inferenzstatistik (1)
- Informal Sector (1)
- Informal Settlements (1)
- Informal Urbanization (1)
- Information Quality Assessment (1)
- Information Visualization (1)
- Informationsdesign (1)
- Informationsmanagement (1)
- Informationssuche (1)
- Informationstechnik (1)
- Infrastruktur-Sondervermögen (1)
- Infrastrukturplanung (1)
- Ingenieurbau (1)
- Ingenieurgeschichte (1)
- Inhalt (1)
- Injektion (1)
- Innovation Management (1)
- Instandhaltung (1)
- Instandhaltungsplanung (1)
- Instandsetzung (1)
- Institutionelle (1)
- Institutioneller Anleger (1)
- Inszenierte Fotografie (1)
- Inszenierung (1)
- Intangible Acoustic Heritage (1)
- Integrated Development Plan (1)
- Integration <Politik> (1)
- Integrationsstrategie (1)
- Integrative Gestaltung (1)
- Interaction Fidelity (1)
- Interaction Techniques (1)
- Interaktion (1)
- Interaktive numerische Simulation (1)
- Interface Design (1)
- Interkristalline Korrosion (1)
- Interkulturalität (1)
- Internal pozzolanic reactivity (1)
- Internalisierung <Wirtschaft> (1)
- Interoperabilität (1)
- Interpartikuläre Wechselwirkungen (1)
- Inverse Gaschromatographie (1)
- Inverse Probleme (1)
- Inverse Problems (1)
- Inverse analysis (1)
- Inverse problems (1)
- Inversionsalgorithmus (1)
- Inversionstheorie (1)
- Investition (1)
- Investor (1)
- Iran (1)
- Iraner (1)
- Iranian immigrants (1)
- Iranierin (1)
- Islamische Altstadt (1)
- Isogeometrc Analysis (1)
- Isogeometric analysis (1)
- Isovist (1)
- Istanbul (1)
- Jahresarbeitsplanung (1)
- Jahrhundertwende (1)
- Jemen (1)
- Jerde Partnership International (1)
- Jim Jarmusch (1)
- Johann Albert Heinric (1)
- Joint type (1)
- Jugend (1)
- Junge Pioniere (1)
- Junger Beton (1)
- KMU (1)
- KTP-Einkristall (1)
- Kairo (1)
- Kaliumtitanylphosphat (1)
- Kalk (1)
- Kalk-Boden-Säulen (1)
- Kalkulation (1)
- Kallmeyer (1)
- Kapazität (1)
- Kapitalisierung (1)
- Kapselclustern (1)
- Karte (1)
- Kartierung (1)
- Kasernenenbauten (1)
- Keramischer Baustoff (1)
- Kernkompetenzen (1)
- Kerntechnische Industrie (1)
- Key (1)
- Kind (1)
- Kindergartenbau (1)
- Kirchoff--love theory (1)
- Klangkunst (1)
- Klassenraum (1)
- Klassenzimmer (1)
- Klassieren (1)
- Klebstoff-Faser-Verbundwerkstoff; Alu-Carbon-Hybridelement; Glas-Kunststoff-Hybridelement; ANSYS; CFK; Klebverbindungen (1)
- Klebtechnologie (1)
- Klein- und Mittelbetrieb (1)
- Klimaanlage (1)
- Klimawechsellagerung (1)
- Klinker (1)
- Klüftung (1)
- Knoop Mikrohärte (1)
- Knoten (1)
- Knotenmodell (1)
- Knowledge modelling (1)
- Kognitive Komplexität (1)
- Kohlenstoff Nanoröhre (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kohäsion (1)
- Kohäsionsflächenverfahren (1)
- Kollaboration (1)
- Kollaborative Arbeit (1)
- Kolonistenhäuser (1)
- Kommerzialisierung (1)
- Kommunikationsdienst (1)
- Kommunikationstechnik (1)
- Kommunität (1)
- Komplexität (1)
- Kompost (1)
- Kompressibilität (1)
- Kondensation (1)
- Konformitätsbewertung (1)
- Konjugierte-Gradienten-Methode (1)
- Konsens (1)
- Konstruktive Optimierung (1)
- Konstrutkiver Entwurf (1)
- Kontaktwechselwirkung (1)
- Kontextbezogenes System (1)
- Kontinuierliche Simul (1)
- Kontinuitaetsbedingungen (1)
- Kontinuum (1)
- Kontrolle (1)
- Konvektion (1)
- Konzentrationslager (1)
- Konzessionen (1)
- Kooperatives Arbeiten (1)
- Korallenriff (1)
- Korea (1)
- Kornzerfall (1)
- Korrosionsgeschwindigkeit (1)
- Korrosionsprüfung (1)
- Korruption (1)
- Kosten- und Leistungsentwicklung (1)
- Kosten-Nutzen-Analyse (1)
- Kostengünstiges Bauen (1)
- Kostenrechnung (1)
- Kraftschluss (1)
- Krankenhaus-Immobilien (1)
- Krankenhausfinanzierung (1)
- Krankenhäuser (1)
- Krieg (1)
- Kriging (1)
- Krim (1)
- Kristallitgröße (1)
- Kritik (1)
- Kritische Theorie (1)
- Kritisches Museumstheater (1)
- Kryptoanalyse (1)
- Kryptographie (1)
- Kulturaustausch (1)
- Kulturgeschichte (1)
- Kulturgeschichte <Fach> (1)
- Kulturgut (1)
- Kulturkreis (1)
- Kulturlandschaft (1)
- Kulturraum (1)
- Kulturtechnik (1)
- Kulturtechniken (1)
- Kunst / Geschichte (1)
- Kunst-Denkmal-Kollaborationen (1)
- Kunstförderung (1)
- Kunstgeschichte (1)
- Kunstsoziologie (1)
- Kunststoff (1)
- Kunststoff-Metall-Verbund (1)
- Kunststoffbauteil (1)
- Kunststoffbauten (1)
- Kunststoffbeton (1)
- Kunststofffilme (1)
- Kunststoffherstellung (1)
- Kunststoffhäuser (1)
- Kunststoffindustrie (1)
- Kunststoffkleben (1)
- Kunststofftechnik (1)
- Kunstvereine (1)
- Kunstvereinslandschaft (1)
- Kupferfixierung (1)
- Kupfersilicate (1)
- Kurzzeit-Kriechen (1)
- Kybernetik (1)
- Körper (1)
- Künstlerbuch (1)
- Künstliche Intelligenz (1)
- Künstliche Korallenriffe (1)
- LSCF (1)
- Lack of building (1)
- Lagos (1)
- Land development (1)
- Landentwicklung (1)
- Landeskunde Thüringen (1)
- Landespflegeplanung (1)
- Landnutzung (1)
- Landscape (1)
- Langzeitverzögerer (1)
- Large Data (1)
- Large Scale Projects (1)
- Las Vegas (Nev.) (1)
- Las Vegas <Nev.> (1)
- Laser-Ultraschall (1)
- Laserschweißen (1)
- Lasertechnologie (1)
- Laservibrometer (1)
- Lassen (1)
- Lastverformungsverhalten (1)
- Latentwärmespeicher (1)
- Latin America (1)
- Latin American city (1)
- Lattice Grids (1)
- Laufzeit (1)
- Laurent (1)
- Laurent-Reihe (1)
- Learned Lessons (1)
- Learning on demand (1)
- Lebendige Architektur (1)
- Lebensdauer (1)
- Lebensdauerabschätzung (1)
- Lebensqualität (1)
- Lebenszyklus (1)
- Lebenszyklusbetrachtungen (1)
- Lehm (1)
- Lehmbau (1)
- Leichtbau (1)
- Leila Roy-Sokhey (1)
- Leipzig (1)
- Leipziger Osten (1)
- Leistungsmeldung (1)
- Leistungswettbewerb (1)
- Leitung (1)
- Lernumgebung (1)
- Lettenkeupersandstein (1)
- Leuchtdichtemessungen (1)
- Libyen (1)
- Licht und Schatten (1)
- Lichtlimitation (1)
- Lichtsignalanlage (1)
- Lichtsignalsteuerung (1)
- Life Cycle Assessment (1)
- Lime Columns (1)
- Limit Atate Analysis (1)
- Lineare Elastizitätstheorie (1)
- Living Architecture (1)
- Living History (1)
- Local maximum entropy approximants (1)
- Localised Sound (1)
- Logistics <theory> (1)
- Logistik (1)
- Logistik <Theorie (1)
- Logit-Modell (1)
- Lomonosov (1)
- Lomonossow (1)
- Lower Keuper Sandstone (1)
- Ludwig Hilberseimer (1)
- Luftelektrizität (1)
- Luftreinigung (1)
- Luftzerlegung (1)
- Luhmann (1)
- Luminance of tropical sky (1)
- Lumineszenzdiode (1)
- Ländlicher Raum (1)
- Lösung innerer und äußerer Randwertprobleme (1)
- Lösungsanalytik (1)
- Lösungsverfahren (1)
- M-Learning (1)
- MAG-Schweißen (1)
- MFPA Weimar (1)
- Machttheorie (1)
- Macro-mesoporous structure (1)
- Magnesiumsulfat (1)
- Mahlaggregat (1)
- Mahlung (1)
- Maintenance (1)
- Maissilage (1)
- Make-up Urbanism (1)
- Make-up-Urbanistik (1)
- Maker Culture (1)
- Makovecz (1)
- Makroalgen (1)
- Makrosimulation (1)
- Mangel (1)
- Mangement (1)
- Maps (1)
- Markenführung (1)
- Markennetze (1)
- Markenpolitik (1)
- Marketing / Strategisches Management (1)
- Markov-Kette mit stetiger Zeit (1)
- Maschine (1)
- Maschinelles Sehen (1)
- Maschinenbau (1)
- Mass Tuned Damper (1)
- Material (1)
- Materialermüdung (1)
- Materialität (1)
- Materialversagen (1)
- Materialwahl (1)
- Mathematical Programming (1)
- Mathematik (1)
- Mauermörtel (1)
- Maurice / Phénoménologie de la perception (1)
- Mechanical properties (1)
- Mechanik (1)
- Mechanische Eigenschaft (1)
- Mechanisches Versagen (1)
- Media Goods (1)
- Media Philosophy (1)
- Media art (1)
- Media discourse (1)
- Media representations (1)
- Mediation (1)
- Medienarchiv (1)
- Medienarchäologie (1)
- Mediendesign (1)
- Medienereignis (1)
- Medienforschung (1)
- Medieninformatik (1)
- Medienpolitik (1)
- Medientechnologie (1)
- Medium <Physik> (1)
- Meeresökologie (1)
- Megastadt (1)
- Mehrachsige Beanspruchung (1)
- Mehragentensystem (1)
- Mehrfachnutzung (1)
- Mehrgenerationenwohnen (1)
- Meißen (1)
- Menaka <Madame> (1)
- Menaka-Archiv (1)
- Mensch-Maschiene-Kommunikation (1)
- Mensch-Maschine-Interaktion (MMI) (1)
- Merleau-Ponty (1)
- Mesh Refinement (1)
- Mesh quality (1)
- Meshless method (1)
- Meso-Scale (1)
- Mesoporous structure (1)
- Metallkleben (1)
- Metallographie (1)
- Metamodell (1)
- Metapher (1)
- Metaphors (1)
- Metaphosphat (1)
- Metastaseis (1)
- Methoden und Verfahren (1)
- Methodik zur Ermittlung der Tageslichtautonomie (1)
- Methodology for calculation of daylight autonomy (1)
- Mexico (1)
- Microstructure (1)
- Middle Keuper Sandstone (1)
- Migrant (1)
- Mikro-Scale (1)
- Mikrokapsel (1)
- Mikrosimulation (1)
- Minderkostenberechnung (1)
- Minderung (1)
- Mineralischer Rohstoff (1)
- Mittelschule Mössingen (1)
- Mix design method (1)
- Mixed Mode (1)
- Mobile Architektur (1)
- Mobile Computing (1)
- Mobile Karte (1)
- Mobile Learning (1)
- Mobile Media Art (1)
- Mobile maps (1)
- Mobiles (1)
- Mobiles Endgerät (1)
- Mobiles Lernen (1)
- Mobilfunk (1)
- Modale Parameter (1)
- Modding (1)
- Model assessment (1)
- Model quality, Model error estimation, Kinematical model, Geometric non-linearity, Finite Element method (1)
- Modellkalibrierung (1)
- Modellqualität, Modellfehlerschätzer, Geometrisch nicht-lineare Berechnung, Kinematik Modell, Finite Elemente Methode (1)
- Moderne Architektur (1)
- Modernisierung (1)
- Modernization (1)
- Modezuordung (1)
- Molecular Dynamics Simulation (1)
- Molekulardynamik (1)
- Mongolei (1)
- Mongolia (1)
- Monte Carlo method (1)
- Monte Carlo simulation (1)
- Monte-Carlo Simulation (1)
- Monte-Carlo-Integration (1)
- Monte-Carlo-Methode (1)
- Montecarlo Simulation (1)
- Montmorillonite (1)
- Morinol (1)
- Motivation (1)
- Multi-Frame Rate Composition (1)
- Multi-Frame Rate Rendering (1)
- Multi-scale modeling (1)
- Multidimensional Scaling (1)
- Multiphysics (1)
- Multiskalenmodellierung (1)
- Muscle model (1)
- Museum (1)
- Museumsführer (1)
- Musik (1)
- Musik und Architektur (1)
- Musikfilm (1)
- Musikvideo (1)
- Muskel (1)
- Muslim (1)
- Musterjahresganglinien (1)
- Mängel (1)
- Müllverbrennung (1)
- Müllverbrennungsanlage (1)
- NIÖ (1)
- NRA (1)
- Nachbehandlung (1)
- Nachbehandlungsmittel (1)
- Nachbergbau (1)
- Nachbeulverhalten (1)
- Nachfragerisiko (1)
- Nachhaltigkeitsbewertung (1)
- Nachkriegsmoderne (1)
- Nanomaterial (1)
- Nanomechanical Resonators (1)
- Nanomechanik (1)
- Nanostructures (1)
- Nanostrukturiertes Material (1)
- Narration (1)
- Narrative (1)
- Nation-building (1)
- Nationalsozialismus (1)
- Natriumchlorid (1)
- Natur (1)
- Natural Language Processing (1)
- Nature (1)
- Naturstein (1)
- Natürliche Sprache (1)
- Neighborhood Effects (1)
- Neue Institutionenökonomik (1)
- Neue Medien (1)
- Neues Steuerungsmodell (1)
- New Public Management (1)
- Nichtlineare Berechnung (1)
- Nichtlineare Kon (1)
- Nichtlineare Stabilitätstheorie (1)
- Nichtlineares System (1)
- Nichtlokale Operatormethode (1)
- Niklas (1)
- Nitrate (1)
- Non-linear buckling (1)
- Nonlinear Programming (1)
- Normalität (1)
- North Korea (1)
- Nouveau Realisme (1)
- Nuclear Art (1)
- Nuklearindustrie (1)
- Numerical (1)
- Numerical Simulation (1)
- Numerical Simulations (1)
- Numerische Berechnung (1)
- Numerische Strömungsmechanik (1)
- Nutzeroberfläche (1)
- Nutzerpartizipation (1)
- Nutzungsdauer (1)
- OA-Publikationsfonds2023 (1)
- OPL (1)
- ORDENAMIENTO TERRITORIAL (1)
- OWL <Informatik> (1)
- Obdachlos (1)
- Oberflächenabdichtung (1)
- Oberflächenspannung (1)
- Oberflächenvorbereitung (1)
- Oberleitungsmasten (1)
- Object-oriented programming (1)
- Objekt (1)
- Objektverfolgung (1)
- Observer (1)
- Oderbruch (1)
- Offener Immo (1)
- Old buildings (1)
- Oldenburg (1)
- Ontologie (1)
- Op spaces (1)
- Op-Räume (1)
- Open Innovation (1)
- Open Source (1)
- Operante Konditionierung (1)
- Opimization (1)
- Optimal Matching Technik (1)
- Optimal Matching Technique (1)
- Optimierungsvorschläge (1)
- Optimization problems (1)
- Oranienbaum (1)
- Organic Architecture (1)
- Organisationsforschung (1)
- Organisationsstruktur (1)
- Organizismus (1)
- Organoleptik (1)
- Orientierung (1)
- Osteuropa (1)
- Otto (1)
- Oxidkeramik (1)
- PAISAJE (1)
- PCM-Putz (1)
- PCM-plaster (1)
- PDEs (1)
- PU Enrichment method (1)
- Pahlavi (1)
- Palimpsest (1)
- Papier (1)
- Papierware (1)
- Parallel Rendering Methods (1)
- Parameteranalyse (1)
- Parameteridentif (1)
- Parameteridentification (1)
- Parameteridentifikation (1)
- Parametrische Optimierung (1)
- Parametrischer Entwurf (1)
- Paramter Identification (1)
- Parasit (1)
- Pareto Front (1)
- Pareto optimization (1)
- Paris (1)
- Partial Differential Equations (1)
- Partialmodelle (1)
- Partikel-Schwarm-Optimierung (1)
- Passive damper (1)
- Paulick (1)
- Pausa AG (1)
- People Approach (1)
- Performative Strategien (1)
- Peripherie (1)
- Perkolationstheorie (1)
- Perowskit (1)
- Perpendicular-to-grain loaded Connections (1)
- Pfahl (1)
- Pfahlgründung (1)
- Pfahlprobebelastung (1)
- Pflanzenkohle (1)
- Pflegebedarf (1)
- Pflegestatistik (1)
- Pflegeversicherung (1)
- Phantastische Architektur (1)
- Phase field method (1)
- Phase field model (1)
- Phase-Field (1)
- Phase-field model (1)
- Phasenfeldanalyse (1)
- Phasenumwandlung (1)
- Phasenübergangsmaterialien (1)
- Phenomenology (1)
- Phenomeology (1)
- Philips Pavillon (1)
- Philosophie der Wissenschaften (1)
- PhoneGuide (1)
- Phosphonocarbonsäure (PBTC) (1)
- Phosphor (1)
- Photobioreaktor (1)
- Photobioreaktorsystem (1)
- Photogrammetrie (1)
- Phung Khoang (1)
- Physics informed neural network (1)
- Piezoelectricity (1)
- Piktogramm (1)
- Pile Foundation (1)
- Pile Load Test (1)
- Pioniererziehung (1)
- Plagiarism Visualization (1)
- Planning process (1)
- Planspiel (1)
- Planung (1)
- Plastizität (1)
- Plastizitätstheorie (1)
- Play (1)
- Political ecology (1)
- Polykristall (1)
- Polymer compound (1)
- Polymer modification (1)
- Polymer nanocomposites (1)
- Polymeradsorption (1)
- Polymermodified Cement Concrete (1)
- Polymermodifizierter Beton (1)
- Polymermodifizierung (1)
- Polymers (1)
- Polymerverbindung (1)
- Polynomial Splines over Hierarchical T-meshes (1)
- Políticas públicas (1)
- Pop-Art (1)
- Porenlösung (1)
- Porenwasser (1)
- Porenwasserdruck (1)
- Porous Materials (1)
- Portfoliomanagement (1)
- Portlandkalksteinzement (1)
- Portlandzement (1)
- Poröser Stoff (1)
- Positionsbestimmung (1)
- Post-Conflict society (1)
- Postkommunismus (1)
- Postsozialismus (1)
- Power Ultrasound (1)
- Pozzolanic reactivity (1)
- Praxeologie (1)
- Praxisbasierte Forschung (1)
- Preferential Choice (1)
- Preiswettbewerb (1)
- Prekariat (1)
- Preußen/Baupolizei (1)
- Preußen/Oberbaudepartement (1)
- Preußische Reformen (1)
- Prevailing/ Competing Narratives (1)
- Primärenergie (1)
- Primärenergiefaktor (1)
- Prinzipien der Vorfertigung (1)
- Privacy (1)
- Privatheit (1)
- Probailistik (1)
- Problemlösen (1)
- Procedural modeling (1)
- Product Design (1)
- Product Search (1)
- Produktentwicklung (1)
- Produktgestaltung (1)
- Produktinformation (1)
- Produktlebenszyklus (1)
- Produktmodell (1)
- Professionalisierung (1)
- Profilstahl (1)
- Prognosemodell (1)
- Prognosemodelle (1)
- Prognosequalität (1)
- Projekt (1)
- Projektemacher (1)
- Projektkunst (1)
- Protocols (1)
- Provable security (1)
- Prozessinnovation (1)
- Prozessmodell (1)
- Präsenz (1)
- Prävention (1)
- Prüftechnik (1)
- Prüfverfahren (1)
- Psychogeographie (1)
- Public Bath Feuerbach (1)
- Public Private Partnership (PPP) (1)
- Public Real Estate Management (1)
- Public Space (1)
- Public Sphere (1)
- Push-over Analyse (1)
- Pyongyang (1)
- Pyrolyse (1)
- Qualitative Evaluation (1)
- Quality Flaw Prediction (1)
- Quality TV (1)
- Quality of Life (1)
- Qualität (1)
- Qualitätssicherung (1)
- Quartiersmanagement (1)
- Quarz (1)
- Quarzglas (1)
- Quaternionenalgebra (1)
- Queranschluß (1)
- Querdehnzahl (1)
- Querkraft (1)
- Querkraftbewehrung (1)
- Querkrafttragfähigkeit (1)
- Querschnittsanalyse (1)
- RC Buildings (1)
- RDF (1)
- RHT-splines (1)
- RQ15 (1)
- Radar (1)
- Radar <Druckschrift> (1)
- RadioGatun (1)
- Rahmenecke (1)
- Rahmentragwerk (1)
- Railway (1)
- Railway bridges (1)
- Randelemente-Methode (1)
- Randwertproblem (1)
- Rapid Visual Assessment (1)
- Raumforschung (1)
- Raumklang (1)
- Raumordnungspolitik (1)
- Rauschenberg (1)
- Rb/K-Diffusionskoeffizient (1)
- Reading Urban National Memory (1)
- Real Estate Investment Trusts (1)
- Reality (1)
- Reception (1)
- Recovery Based Error Estimator (1)
- Referenzfläche (1)
- Regenrückhaltebecken (1)
- Regional planning (1)
- Regionalplanung (1)
- Rehabilitation (1)
- Rehabilitationseinr (1)
- Reimarus (1)
- Reinforced Concrete (1)
- Reinforced concrete (1)
- Relationale Raummodelle (1)
- Reliability (1)
- Reliability Theory (1)
- Reliability-based design optimization (1)
- Relikte (1)
- Rendering (1)
- Reorganisation (1)
- Residual-based variational multiscale method (1)
- Resilience (1)
- Resonator (1)
- Resource Management (1)
- Ressourcen (1)
- Restaurierung (1)
- Restbeton (1)
- Restfestigkeit (1)
- Resttragfähigkeit (1)
- Retardation (1)
- Retroinnovation (1)
- Reuchlinhaus (1)
- Revitalisierung (1)
- Revitalization (1)
- Rheological property (1)
- Ric (1)
- Rich Media Content (1)
- Rietveld-Methode (1)
- Rio de Janeiro (1)
- Risiko (1)
- Risikoallokation (1)
- Risikoerfassung (1)
- Risikoverteilung (1)
- Risk management (1)
- Riss (1)
- Rissausbreitung (1)
- Rissbreite (1)
- Rissentwicklung (1)
- Risssimulation (1)
- Robustheit (1)
- Rohrleitung (1)
- Rudolf Hamburger (1)
- Ruine (1)
- Rumänien (1)
- Rural Area (1)
- Räumliche Konfiguration (1)
- Rückbeton (1)
- SAP (1)
- SHACAL-2 (1)
- SHM (1)
- SVB (1)
- Sachsen-Weimar-Eisenach <Großherzogtum> (1)
- Safety of work (1)
- Salt frost attack (1)
- Salt-Frost-Attack (1)
- Salzmischungen (1)
- Salzschmelze (1)
- Sana (1)
- Sandwichbauteil (1)
- Santiago de Chile (1)
- Sattlement (1)
- Sauerstoffseparation (1)
- Saugspannung (1)
- Scale-Up (1)
- Schadenerkennung (1)
- Schadensanalyse (1)
- Schadensdetektionsverfahren (1)
- Schadensdiagnose (1)
- Schadensmechanik (1)
- Schadensmechanismus (1)
- Schadenspotential (1)
- Schallemissionsanalyse (1)
- Schaum (1)
- Schilfsandstein (1)
- Schlichtung (1)
- Schlichtungsgespräch (1)
- Schlüssel / Objekt (1)
- Schmale Luzin (1)
- Schnittgrößenumlagerungen (1)
- School (1)
- School Institution (1)
- Schottersäule (1)
- Schulbau (1)
- Schulhaus (1)
- Schweinegülle (1)
- Schweißen (1)
- Schweißverbindung (1)
- Schwindisotherme (1)
- Schwindmechanismus (1)
- Schwindreduktion (1)
- Schwindreduzierer (1)
- Schwingung (1)
- Schwingungsanalyse (1)
- Schädigung (1)
- Schädigungsindikator (1)
- Schätztheorie (1)
- Schüler / Behinderung (1)
- Schüttung (1)
- Scott Brown and Partner (1)
- Secondary School Moessingen (1)
- Sediment (1)
- Seerestaurierung (1)
- Segmentierung (1)
- Segregation <Soziologie> (1)
- Seidenstraße (1)
- Seiltragwerk (1)
- Seismic Vulnerability (1)
- Sekundärrohstoff (1)
- Selbstbildnis (1)
- Selbstheilendem Beton (1)
- Selbstheilung (1)
- Selbstportrait (1)
- Selbstüberwachung (1)
- Self-compacting high performance concrete (1)
- Self-healing concrete (1)
- Selfie (1)
- Semi-active damper (1)
- Senioren (1)
- Sensitivity (1)
- Sensor (1)
- Sensortechnologien (1)
- Sequenzanalyse <Soziologie> (1)
- Sequestrierung (1)
- Serialität (1)
- Shape optimization (1)
- Shear Capacity (1)
- Shear Strength (1)
- Shopping Centre (1)
- Sicherheitstheorie (1)
- Sichtbarkeit (1)
- Sickerwasser (1)
- Siedlungsabfallverbrennungsanlage (1)
- Siedlungsbau (1)
- Siedlungswasserwirtschaft (1)
- Silica fume (1)
- Simulationsmodell (1)
- Simulationsprozess (1)
- Sinne (1)
- Skopje 2014 (1)
- Slums (1)
- Smart Health (1)
- Smart Textiles (1)
- Smartphone (1)
- Social Media (1)
- Social Networks (1)
- Social context (1)
- Socio-spatial Segregation (1)
- Socio-spatiality (1)
- Socio-urban Exclusion (1)
- Software-Architektur (1)
- Software-Komponente (1)
- Software-Studies (1)
- Softwareentwicklung (1)
- Sonnenenergie (1)
- Sonnenkollektor (1)
- Sorption (1)
- Sorptionsisotherme (1)
- Sorptionswärme (1)
- Sortierung von Permutationen (1)
- South Germany (1)
- Sowjetunion / GRU (1)
- Sozial (1)
- Soziale Integration (1)
- Soziale Kosten (1)
- Soziales (1)
- Soziales Netzwerk (1)
- Sozialismus (1)
- Sozialistischer Realismus (1)
- Sozialwohnung (1)
- Soziologie / Systemtheorie (1)
- Space (1)
- Space Syntax (1)
- Spaltdruck (1)
- Spannungsintensitätsfaktor (1)
- Spannungszustand (1)
- Spatial Integration (1)
- Spatial Transformation (1)
- Spatial formation (1)
- Spiel (1)
- Spielleitplanung (1)
- Spielwissenschaft (1)
- Spoerri (1)
- Sprachverarbeitung (1)
- Sprawl (1)
- Sprödbruch (1)
- Spurensuche (1)
- SrMnO3 (1)
- St. John's University (1)
- Staat (1)
- Stabilisierung (1)
- Stability behavior (1)
- Stabnetz (1)
- Stadt / Teilung (1)
- Stadt- und Umland-Beziehungen (1)
- Stadtbad Feuerbach (1)
- Stadterhaltung (1)
- Stadterneuerung (1)
- Stadtgeschichte (1)
- Stadtgeschichte <Fach> (1)
- Stadtgestalt (1)
- Stadtgrün (1)
- Stadthotels; Energieeffizienz; Wirtschaftlichkeit (1)
- Stadtinformationssystem (1)
- Stadtkern (1)
- Stadtklima (1)
- Stadtlandschaft (1)
- Stadtstruktur (1)
- Stadtviertel (1)
- Stadtwald (1)
- Stadtzentrum (1)
- Stahlbeton-Rahmenbauwerke (1)
- Stahlbetonbau (1)
- Stahlbetonbau / Skelettbau (1)
- Stahlkonstruktionen (1)
- Standard-Software (1)
- Standardisierung (1)
- Standardsoftware (1)
- Standsicherheit (1)
- Stapelproblem (1)
- Statics (1)
- Statik (1)
- Statistik (1)
- Statistische Analyse (1)
- Statistischer Größeneinfluss (1)
- Staudamm (1)
- Steel frames (1)
- Stehendes Gewässer (1)
- Steifigkeits-Degradation (1)
- Steifigkeitsdegradation (1)
- Steinfestigung (1)
- Steinkonservierung (1)
- Stereofonie (1)
- Stereophonie (1)
- Stereotyp (1)
- Stickstoff (1)
- Stimmung (1)
- Stochastische Analysis (1)
- Stoffgesetz (1)
- Stone Columns (1)
- Strahlung (1)
- Strain Energy (1)
- Strategisches Sourcing (1)
- Straßenbenutzungsgebühr (1)
- Straßenbeton (1)
- Straßenbetriebsdienst (1)
- Straßenbrücke (1)
- Straßennetz (1)
- Straßensektor (1)
- Streit (1)
- Streitbeilegung (1)
- Streitbeilegungsmodell (1)
- Streitbeilegungsverfahren (1)
- Streiterledigung (1)
- Stress Intensity Factor (1)
- Strukturbildung (1)
- Strukturvergleich (1)
- Strukturwandel (1)
- Strukturänderung (1)
- Struvite (1)
- Strömungsfeld (1)
- Strömungsmechanik (1)
- Stuckgips (1)
- Stufen-Schwellen-Sequenzen (1)
- Stuttgart / Sonderforschungsbereich Rechnergestützte Modellierung und Simulation zur Analyse (1)
- Städtebauförderung (1)
- Städtischer Raum (1)
- Stärkefließmittel (1)
- Stütze (1)
- Subjekt (1)
- Suburbanisation (1)
- Suburbia (1)
- Suchmaschine (1)
- Super Healing (1)
- Superplasticizer (1)
- Supplementary cementitious materials (1)
- Surface effects (1)
- Suspendieren (1)
- Suspension (1)
- Suspensionsanalytik (1)
- Sustainability Marketing (1)
- Symbolik (1)
- Symbolische Selbsterfüllung (1)
- Symmetric-key cryptography (1)
- Synchronisation (1)
- Synchronisierung (1)
- Synthese (1)
- System Identification (1)
- Systembauweise (1)
- Systemtheorie (1)
- Süddeutschland (1)
- TERRITORIO (1)
- TV-Serie (1)
- Tachmetry (1)
- Tageslicht (1)
- Tageslichtkontrollsysteme (1)
- Talsperre (1)
- Tangible User Interfaces (1)
- Taumittel (1)
- Taylor (1)
- Taylor Series Expansion (1)
- Taylor-Reihe (1)
- Taylorismus (1)
- Technik (1)
- Technik / Geschichte (1)
- Technische Innovation (1)
- Technische Überwachung (1)
- Technisches Denkmal (1)
- Technologies of Expression (1)
- Technology (1)
- Tehran (1)
- Teilnehmende Beobachtung (1)
- Teilsättigung (1)
- Teilung (1)
- Telecommunication (1)
- Telekommunikation (1)
- Telepräsenz (1)
- Temperatur (1)
- Temperaturfeld (1)
- Templates (1)
- Tensegrity (1)
- Tensegrity <Tragwerk> (1)
- Tensiometer (1)
- Territorial planning (1)
- Territorium (1)
- Territory (1)
- Text Classification (1)
- Text-based Visualization (1)
- Text-bild-basierte Narration (1)
- Theaterbau (1)
- Theorie des Raumes (1)
- Thermal Comfort (1)
- Thermal Fluid-Structure Interaction (1)
- Thermische Behaglichkeit (1)
- Thermische Belastung (1)
- Thermische Energiespeicherung (1)
- Thermochemische Wärmespeicherung (1)
- Thermodynamic modeling (1)
- Thermodynamik (1)
- Thermoelastic damping (1)
- Thermoelasticity (1)
- Thermoelastizität (1)
- Thin shell (1)
- Thin-walled Structures (1)
- Thin-walled structures (1)
- Thorax (1)
- Tichonov-Regularisierung (1)
- Tiefensensor (1)
- Tiger (1)
- Tikhonov regularization (1)
- Timber (1)
- Ton <Geologie> (1)
- Tonfilm (1)
- Topologieoptimierung (1)
- Topology Optimization (1)
- Tower of Hanoi (1)
- Tracht (1)
- Tradition (1)
- Traditioneller Illustrationsbegriff (1)
- Traffic revenue risk (1)
- Tragendes Teil (1)
- Tragkonstruktion (1)
- Traglast (1)
- Tragwerke (1)
- Tragwerksplanung (1)
- Tragwerksverstärkung (1)
- Transdisziplinarität (1)
- Transformaciones urbanas (1)
- Transformation (1)
- Transmission problem (1)
- Transmissionsaufgabe (1)
- Transparenz (1)
- Transportgleichung (1)
- Triaxialversuch (1)
- Tribologie (1)
- Träger (1)
- Tsingtau (1)
- Turm von Hanoi (1)
- Typenbildung (1)
- UDDT (1)
- UN-Kinderrechtskonvention (1)
- Ubiquitous Computing (1)
- Ultra-high performance concrete. (1)
- Ultraschall-Laserverfahren (1)
- Ultraschallmesstechnik (1)
- Umnutzung (1)
- Umschnürung (1)
- Umwandlung (1)
- Umweltforschung (1)
- Umweltleistung (1)
- Umweltzeichen (1)
- Uncertainty analysis (1)
- Unfallursache (1)
- Unfallverhütung (1)
- Ungarn (1)
- Ungesättigte Zone (1)
- Unsaturated soil (1)
- Unschärfequantifizierung (1)
- Untergrundklassifikation (1)
- Unternehmen (1)
- Unternehmensstruktur (1)
- Unterwasserarchitektur (1)
- Uranbergbau (1)
- Urban Agoraphobia (1)
- Urban Environment (1)
- Urban Heritage (1)
- Urban Planning Tool (1)
- Urban Social Movements (1)
- Urban Sociology (1)
- Urban Space (1)
- Urban governance (1)
- Urban identity (1)
- Urban resilience (1)
- Urbanisation (1)
- Urbanisierung (1)
- Usability (1)
- User Generated Content (1)
- User Interfaces and Interaction Techniques (1)
- User created content (1)
- User-Created Content (1)
- User-generated Content Analysis (1)
- Userinterface-Design (1)
- VMOM Raum (1)
- VMOM space (1)
- VRML (1)
- Valparaíso (1)
- Van de Velde, Henry (1)
- Variographie (1)
- Venturi (1)
- Verallgemeinerte Technische Biegetheorie (1)
- Verbindung (1)
- Verbindungskoeffizienten (1)
- Verbindungstechnik (1)
- Verbraucherverhalten (1)
- Verbunddeckenplatten (1)
- Verbunddokument (1)
- Verbundkonstruktionen (1)
- Verbundmittel (1)
- Verbundverhalten (1)
- Verbundwerkstoff (1)
- Verflüssigung (1)
- Vergabe- und Vertragsordnung für Bauleistungen (1)
- Vergessen (1)
- Verglasung (1)
- Vergärung (1)
- Verhandlung (1)
- Verkehrsablauf (1)
- Verkehrsinfrastruktur (1)
- Verkehrslast (1)
- Verkehrsmengenrisiko (1)
- Verkehrsqualität (1)
- Verkehrssignalanlage (1)
- Verkehrstechnik (1)
- Verkehrsverhalten (1)
- Verkehrswirtschaft (1)
- Verknüpfungen (1)
- Vermittlung (1)
- Vernetzung (1)
- Versagensmechanismen (1)
- Versickerung (1)
- Version control (1)
- Versionierung (1)
- Verstärkung (1)
- Versuchsmethode (1)
- Verteilte Anwendungen (1)
- Verteilte Modelle (1)
- Vertical roller mill (1)
- Vertrauen (1)
- Vesicle Doublet (1)
- Vesicle Hydrodynamics (1)
- Vesicle dynamics (1)
- Vesicles Electromechanics (1)
- Vesikel Elektromechanik (1)
- Vesikel Hydrodynamik (1)
- Vesikel-Doublette (1)
- Vibration (1)
- Video (1)
- Video Game (1)
- Videokonferenz (1)
- Videokunst (1)
- Videospiel (1)
- Videotelefonie (1)
- Vietnam (1)
- Vilém Flusser (1)
- Virtual cultural heritage (1)
- Virtualisierung (1)
- Virtuality (1)
- Virtuell freie Gruppe (1)
- Virtuelles Unternehmen (1)
- Visual Art (1)
- Visual Perception (1)
- Visual Quality (1)
- Visual comfort (1)
- Visualisation (1)
- Visuelle Effekte ; virtuelles Studio ; digitale Videokomposition (1)
- Visuelle Medien (1)
- Visuelle Semiotik (1)
- Vocational (1)
- Volkskunde (1)
- Volkstracht (1)
- Vollholz (1)
- Volume Rendering (1)
- Vorstadt (1)
- Vortex Induced Vibration (1)
- Vortex-induced vibration (1)
- WEB (1)
- Wachstumshemmung (1)
- Warenhaus (1)
- Warenhaus Wertheim (1)
- Warping moments (1)
- Warping stiffness (1)
- Wasserbau (1)
- Wasserglas (1)
- Wasserhaushalt (1)
- Wasserlinsendecken (1)
- Wasserreserve (1)
- Wasserressourcenmanagement (1)
- Wasserversorgung (1)
- Wasserwirtschaft (1)
- Waste management concept (1)
- Waste to Energy (1)
- Wave propagation (1)
- Wavelet based adaptation (1)
- Wayfinding (1)
- Wearable Computing (1)
- Wearable Technology (1)
- Wearables (1)
- Web (1)
- Web archive (1)
- WebGL (1)
- Wechselwirkung (1)
- Wegfindung (1)
- Wegrouten (1)
- Weimar (1)
- Weimar / Sonderforschungsbereich Werkstoffe und Konstruktionen für die Revitalisierung von Bauwerken (1)
- Wellenausbreitung (1)
- Wellpappe (1)
- Welterbe (1)
- Weltgeschichte (1)
- Welthilfssprach (1)
- Werbung (1)
- Werkstoffdämpfung (1)
- Werkstoffprüfung (1)
- Wert (1)
- Werthandlungsbereich (1)
- Werthandlungsmodell (1)
- Wertphilosophie (1)
- Wertstoff (1)
- Wettbewerbsstrategie (1)
- Weyl (1)
- Wiederholung (1)
- Wikipedia (1)
- Wirbelringe (1)
- Wirkmechanismus (1)
- Wirtschaft (1)
- Wirtschaftlichkeit (1)
- Wirtschaftsimperialismus (1)
- Wissenschaftsphilosophie (1)
- Wissensmodellierung (1)
- Woelbsteifigkeit (1)
- Wohngemeinschaft (1)
- Wohnhäuser in Stahlbauweise (1)
- Wohnungsbestand (1)
- Wohnungsmoderne (1)
- Wohnungsmodernisierung (1)
- Wohnungssektor (1)
- Wohnungswesen (1)
- Wohnungswirtschaft (1)
- Wärmebedarf (1)
- Wärmeeinflusszone (1)
- Wärmeleitfähigkeit (1)
- Wärmeverlust (1)
- Wärmeübertragung (1)
- Xiyü-Kultur (1)
- Young's modulus (1)
- Zeichnung (1)
- Zeitgenössischer Illustrationsbegriff (1)
- Zementmahlung (1)
- Zentralchina (1)
- Zentralität (1)
- Zentrum-Peripherie-Modell (1)
- Zersiedlung (1)
- Zielmarkt (1)
- Zufahrt (1)
- Zufallsfeld (1)
- Zugbelastung (1)
- Zugfestigkeit (1)
- Zugversuch (1)
- Zuverlässigkeit in der Bauausführung (1)
- Zwangsmigration (1)
- Zwangsspannung (1)
- Zweischaliges Mauerwerk (1)
- Zwischenstadt (1)
- Zylinder-Achsen-Modell (1)
- Zypern (1)
- accident reasons (1)
- acid resistant coating material (1)
- action mechanism (1)
- active citizenship (1)
- adaption (1)
- adaptive contact (1)
- adaptive reuse (1)
- adaptive simulation (1)
- adaptivity (1)
- adhesion (1)
- adhesive bonding (1)
- admixture (1)
- aerated concrete (1)
- aesthetics (1)
- affordance (1)
- aged hemihydrate plasters (1)
- aggregate (1)
- aggregates (1)
- aid (1)
- alkali silicate gels (1)
- alkali silicate reaction (1)
- alkali-carbonate reaction (1)
- alkali-silica reaction; pavements; external alkalis; deicer; sodium chloride; alkali acetates; alkali formates; ASR performance test; cyclic climate storage (1)
- alkali-silica-reaktion (1)
- alpha-C2SH (1)
- alternative Bindemittel (1)
- alternative spaces (1)
- anaerobic digestion (1)
- applied computer science (1)
- arabic old city (1)
- arbitration (1)
- architectural space (1)
- architecture and urban planning history of Shanghai (1)
- architektonischer Entwurf (1)
- architektonischer Raum (1)
- argumentation (1)
- arrangements (1)
- art in public space (1)
- artistic research (1)
- asiatische Kultur (1)
- associative space (1)
- atomistic simulation methods (1)
- audio walk (1)
- authenticated encryption (1)
- autofrettage (1)
- autogenes Schwinden (1)
- autogenous shrinkage (1)
- automation (1)
- banal (1)
- barracks (1)
- barrio (1)
- belonging (1)
- bentonite-sand mixtures (1)
- beton (1)
- biaxial – sand (1)
- biaxial-sand (1)
- block ciphers (1)
- bridge (1)
- bridge-vehicle interaction (1)
- brittle fracture (1)
- building Information model (1)
- building damage (1)
- building information modelling (1)
- building model (1)
- building modeling (1)
- building modelling (1)
- building surveying (1)
- building technique (1)
- building with plastics (1)
- buildings (1)
- built environment (1)
- cable-strut-systems (1)
- calcium sulfate hemihydrate (1)
- capitalism (1)
- capitalist city (1)
- capitalization (1)
- case study (1)
- catenary action (1)
- centralized planning (1)
- ceramics (1)
- characterization of surface (1)
- cinema (1)
- civil engineer . active integration (1)
- civil society (1)
- classroom (1)
- climate change (1)
- climate storage (1)
- cluster analysis (1)
- cohesion (1)
- cohesive elements (1)
- colonialcity (1)
- combustion (1)
- communal space (1)
- communication media (1)
- communications service (1)
- community gardens (1)
- comparison of structure (1)
- competition (1)
- composite (1)
- composite cement (1)
- composite elements (1)
- compressibility (1)
- compressive arching (1)
- computer aides optimization (1)
- computerenhanced (1)
- computergestützte Bauaufnahme (1)
- concentrated load (1)
- concentration camp (1)
- concrete admixture (1)
- concrete pavements (1)
- conduction (1)
- conjugate gradient method (1)
- connection coefficients (1)
- connector (1)
- consciousness (1)
- construction chemicals (1)
- construction company (1)
- construction industry (1)
- construction schedule (1)
- content production (1)
- continuum damage mechanics (1)
- continuum mechanic (1)
- contribution management (1)
- controversial topics (1)
- convection (1)
- cordoba (1)
- corpus construction (1)
- cost estimation (1)
- course of events (1)
- crack identification (1)
- crack mitigation (1)
- crack simulation (1)
- cracking of concrete (1)
- creep (1)
- critical theory (1)
- cross-section analysis (1)
- cultural studies (1)
- culture (1)
- curing compounds (1)
- damage indicator (1)
- damage potential (1)
- dams (1)
- day nursery (1)
- decay experiments (1)
- decision (1)
- decision-making (1)
- deep neural network (1)
- defects (1)
- deformation behavior (1)
- degree of reaction (1)
- delamination (1)
- demand risk (1)
- demographischer Wandel (1)
- demography (1)
- department store (1)
- deviatoric (1)
- deviatorisch (1)
- difference potentials (1)
- differential cryptanalysis (1)
- differentiation (1)
- digital media (1)
- digital planing tools (1)
- digitale Entwurfswerkzeuge (1)
- digitale Kultur (1)
- digitale Organisation (1)
- discontinuum mechanic (1)
- discourse analysis (1)
- discrete Fourier transform (1)
- discrete function theory (1)
- discrete fundamental solution (1)
- disjoining pressure (1)
- diskontinuum mechanics (1)
- diskrete Fundamentallösung (1)
- diskretes Einfach- und Doppelschichtpotential (1)
- disproportionate collapse (1)
- dissimilarity measures (1)
- dissipation of energy (1)
- distributed applications (1)
- distributed models (1)
- documentation (1)
- domain decomposition (1)
- drying-wetting (1)
- dynamic amplifification (1)
- dynamic behavior (1)
- early project phase (1)
- earthquake damage (1)
- eclecticism in architecture (1)
- ecolabelling (1)
- ecological architecture (1)
- economic development (1)
- editor (1)
- effective properties (1)
- effects of architecture (1)
- efficiency (1)
- einschichtige Elemente (1)
- elastic properties (1)
- elasticity (1)
- elastische Eigenschaften (1)
- elastische Parameter (1)
- empirische Regionalforschung (1)
- energy demand (1)
- energy dissipation (1)
- energy-dissipation (1)
- engineer-technical integration (1)
- environmental perception (1)
- epicenter density (1)
- epistemology (1)
- equity (1)
- ereignisbasiert (1)
- erneuerbare Energie (1)
- europäische Architektur (1)
- evaluation (1)
- evolutionary algorithms (1)
- exhibition halls (1)
- existing buildings (1)
- experiment (1)
- experiments (1)
- external costs (1)
- external pozzolanic reactivity (1)
- extradisciplinarity (1)
- fachliche Integration (1)
- failure (1)
- farmer houses (1)
- faserverstärkt (1)
- faserverstärkte Kunststoffe (1)
- fault diagnosis (1)
- fiber optical Sensor (1)
- fiber reeinforced plastics (1)
- fiber reinforced polymer (1)
- fiber-reinforced plastics (1)
- fiber-reinforced shell structures (1)
- finite difference methods (1)
- finite element (1)
- finite elements (1)
- fire (1)
- flow resistance (1)
- fluidity (1)
- flussgebietsorientierte Bewirtschaftung (1)
- force-fit (1)
- fracture behavior (1)
- france (1)
- freeze-thaw resistance (1)
- freeze-thaw-resistance (1)
- fresh mortar (1)
- friderizianische Kolonisation (1)
- frost resistance (1)
- frühe Planungsphasen (1)
- gas pipes (1)
- gated community (1)
- genealogy (1)
- generalized Kolosov-Muskhelishvili formulae (1)
- generalized theorem of Goursat (1)
- generation (1)
- geometrical nonlinear (1)
- geometry (1)
- geostatistic (1)
- globalization (1)
- gradient elasticity (1)
- gravel-bed rivers (1)
- grid-based (1)
- group document (1)
- guidance in construction (1)
- gypsumcristalline (1)
- hardened mortar (1)
- harmonic (1)
- hash function (1)
- hash functions (1)
- hazard assessment (1)
- heat of hydration (1)
- heterogeneous material (1)
- heuristic solutions (1)
- heuristische Lösungsverfahren (1)
- high-performance computing (1)
- high-strenght concrete (1)
- historic old city (1)
- historical buildings (1)
- historical spatial analysis (1)
- history 19th century (1)
- history of builing (1)
- history of technology (1)
- hochfester Beton (1)
- homogene heterogene Strukturcharakterisierung (1)
- hospitals (1)
- housing block (1)
- housing stock (1)
- human touch (1)
- hydration (1)
- hydration kinetics (1)
- hydraulics (1)
- hydraulisch induzierter Riss (1)
- hydro-mechanics (1)
- hydromechanische Prozesse (1)
- hygro-mechanical stability (1)
- hygro-mechanische Instabilität (1)
- hygrothermal long-time load-bearing performance (1)
- hygrothermisches Langzeittragverhalten (1)
- iPiT® (1)
- iconic architecture (1)
- iconography (1)
- ideological space (1)
- ideology (1)
- Image (1)
- immersion (1)
- impedance function (1)
- inclusive design (1)
- incompiuto siciliano (1)
- incompletion (1)
- indicator (1)
- individual roughness structure (1)
- individuelle Rauheitsstruktur (1)
- industrial heritage (1)
- influence of architecture (1)
- information management (1)
- information system (1)
- information technology (1)
- infrastructure studies (1)
- innere relative Feuchte (1)
- innovative construction details (1)
- innovative potentials (1)
- institutional (1)
- integrated sanitation system (1)
- integration (1)
- intelligente Materialien (1)
- interactive (1)
- interaktiv (1)
- intercultural studies (1)
- intergranular damage (1)
- internal relative humidity (1)
- international organizations (1)
- inversion procedure (1)
- inversion theorie (1)
- islamic old city (1)
- isogeometric analysis (1)
- isogeometric methods (1)
- job description (1)
- joining (1)
- joint (1)
- jointed rock (1)
- joints (1)
- k-Wert (1)
- keramische Masse (1)
- keyqueries (1)
- kinder- und jugendfreundliche Stadtentwicklung (1)
- kindergarden architecture (1)
- knowledge theory (1)
- koiter approximation (1)
- kollektive Kreativität (1)
- kriging (1)
- künstlerischer Ausdruck (1)
- laminated timber (1)
- laminated wood construction (1)
- land use management (1)
- landfill cover lining system (1)
- landslide (1)
- large panel buildings (1)
- latent heat storage (1)
- leakages (1)
- learning environment (1)
- level set method (1)
- level-of-service (1)
- life cycle costs (1)
- life cycle management (1)
- lighting conductor (1)
- lightning rod (1)
- linear elastic fracture mechanics (1)
- links (1)
- liquid storage tank (1)
- liquid vicosity (1)
- liquid-structure-interaction (1)
- lived-experiences (1)
- living (1)
- living heritage site (1)
- load bearing structure (1)
- load-test (1)
- local approach (1)
- logit-model (1)
- long-term retarder (1)
- long-time-performance (1)
- low middle class (1)
- lösbare Verbindung (1)
- machine (1)
- machine learning (1)
- macroscale (1)
- masonry (1)
- mass housing estates (1)
- material failure (1)
- material properties (1)
- material selection (1)
- materialgerecht (1)
- mathematical modelling (1)
- mathematics (1)
- matrix-free (1)
- maximum stress (1)
- mechanische Effizienz (1)
- mechanism (1)
- media (1)
- media history (1)
- media theory (1)
- mediation (1)
- mega-project (1)
- megacity (1)
- mehrphasig (1)
- mehrschichtige Elemente (1)
- mercantilización (1)
- mesoscale (1)
- metakaolin (1)
- metaphosphate (1)
- methodes and procedures (1)
- methods of planing (1)
- microdensification (1)
- microscopy (1)
- microtremors (1)
- mobile Medientechnologien (1)
- mobile devices (1)
- modal damping (1)
- modal parameters (1)
- mode pairing (1)
- model assessment (1)
- model updating (1)
- modern architecture (1)
- modern industries (1)
- modern ruins (1)
- modulares Bauwerk (1)
- monogene Orthogonalreihenentwicklungen (1)
- monogenic orthogonal series expansions Fourier (1)
- mortar method (1)
- moslem settlements (1)
- motars (1)
- multi-objective optimization (1)
- multidimensional scaling (1)
- multigrid (1)
- multigrid method (1)
- multiscale method (1)
- municipal (1)
- museum guidance system (1)
- nachgeordnetes Straßennetz (1)
- nanosheets (1)
- natural building stone (1)
- natural language processing (1)
- natürliche Fließgewässer (1)
- navigation (1)
- negotiation (1)
- neoliberal urban reconstruction (1)
- neoliberalism (1)
- new alternative sanitation systems NASS (1)
- nichtlineare Optimierung (1)
- niederzyklisch (1)
- non-destructive (1)
- non-destructive test procedures (1)
- non-linear optimisation (1)
- non-standard planning (1)
- nonlinear creep (1)
- nonlinear finite elements (1)
- numeric analysis (1)
- numerical methods (1)
- numerical modelling (1)
- numerical simulation (1)
- object splitting (1)
- object versioning (1)
- object-orientation (1)
- objektoriertes Paradigma (1)
- operative mechanisms (1)
- optimal sensor positions (1)
- optimale Sensorpositionierung (1)
- optimisations (1)
- optisches Gitter (1)
- orientation (1)
- p-Laplace equation (1)
- parameter identification (1)
- parametric design (1)
- parametric optimization (1)
- partial models (1)
- participation (1)
- password scrambler (1)
- pathway awareness (1)
- people (1)
- perception (1)
- perception of space (1)
- percolation theory (1)
- permutations (1)
- phase change materials (1)
- phase field (1)
- phase field fracture method (1)
- phenomenology method (1)
- philosophy (1)
- philosophy of science (1)
- phosphonocarbon acid (PBTC) (1)
- phosphorus (1)
- physical nonlinear (1)
- physically and geometrically nonlinear computation (1)
- physically non-linear analysis (1)
- physikalisch nichtlinear (1)
- pig manure (1)
- pile problem (1)
- plagiarism detection (1)
- plane-strain conditions (1)
- planning discourse (1)
- plasterboard (1)
- plastic building (1)
- polymer cement concrete (1)
- polymer concrete (1)
- pore solution (1)
- portland limestone cement (1)
- poröse Trägermaterialien (1)
- post war architecture (1)
- post-buckling analysis (1)
- post-conflict (1)
- post-socialist city (1)
- power theory of value (1)
- pre-stress (1)
- prefabricated building principles (1)
- prefabricated houses (1)
- preschool (1)
- preservation of the city (1)
- prestress (1)
- prevention (1)
- primary and secondary market (1)
- principles of prefabrication (1)
- probabilistics (1)
- process, tools, methods (1)
- processing of engineering tasks (1)
- project finance (1)
- projector (1)
- property sector (1)
- provable security (1)
- prácticas del habitar (1)
- public building (1)
- pull-out (1)
- puplic hospital (1)
- push-over analysis (1)
- quadratical optimization (1)
- quality assurance (1)
- quasicontinuum method (1)
- quaternary cement (1)
- quaternion (1)
- radiation (1)
- random vibrations (1)
- real estate investor (1)
- realistische Illusion (1)
- reception (1)
- reconstruction (1)
- recovery-based and residual-based error estimators (1)
- regional planning policy (1)
- reinforced-concrete (1)
- reinforcement (1)
- reinforcement learning (1)
- reliability assessment (1)
- reliability in construction processes (1)
- remaining load capacitiy (1)
- repetition (1)
- representation (1)
- residential buildings (1)
- residual stress (1)
- resilient city (1)
- resolve dispute (1)
- response surface method (1)
- restoration of the historic city (1)
- restrained stress (1)
- revitalisation (1)
- revitalization (1)
- risk allocation (1)
- road bridge (1)
- road pricing (1)
- roughness (1)
- roughness parameter (1)
- rural (1)
- rural arquitecture (1)
- rural houses (1)
- räumlich verteiltes Arbeiten (1)
- räumliche Anfragesprache (1)
- sanitation planning (1)
- sanitation planning, sustainable technology, sustainability assessment (1)
- scalable smeared crack analysis (1)
- scale transition (1)
- school (1)
- schoolhouse (1)
- schwindreduzierendes Zusatzmittel (1)
- search engines (1)
- secret service Soviet Union (1)
- seepage (1)
- segmentation algorithm (1)
- seismic control (1)
- seismic hazard (1)
- selective sensitivity (1)
- selektive Sensitivität (1)
- self healing concrete (1)
- self-checking (1)
- self-production (1)
- semispace model (1)
- seniors (1)
- sense of presence (1)
- sensitivity and uncertainty analysis (1)
- sequence (1)
- set regulator (1)
- short-term creep (1)
- shrinkage reducer (1)
- shrinkage reducing admixtures (1)
- shrinkage reducing agents (1)
- shrinkage reduction (1)
- shrinking city (1)
- silikatkeramische Masse (1)
- similarity measurement (1)
- site classification (1)
- slab (1)
- slide attacks (1)
- slip-block-test (1)
- slow-late-aggregate (1)
- smoothed particle hydrodynamics (1)
- social network analysis (1)
- socialist modernism (1)
- socio-spatial practices (1)
- software architecture (1)
- software component (1)
- soil heterogeneity (1)
- soil-structure interaction (1)
- soil-structure-interaction (1)
- solar energy (1)
- solution of inner and outer boundary value problems (1)
- solver (1)
- sommerlicher Wärmeschutz (1)
- soviet architecture (1)
- sowjetische Architektur (1)
- sozialistische Moderne (1)
- soziotechnisches Gemenge (1)
- space (1)
- space of ideology (1)
- space of terror (1)
- space syntax (1)
- space; power; knowledge (1)
- spatial concept (1)
- spatial development (1)
- spatial distant work groups (1)
- spatial query (1)
- spatial structures (1)
- spatial transition (1)
- spherical (1)
- sphärisch (1)
- stability theory (1)
- standard (1)
- standard software (1)
- state socialist utopia (1)
- statistic size effect (1)
- statistical analysis (1)
- steel (1)
- steel structures (1)
- step-pool sequences (1)
- stiffness (1)
- stiffness-degradation (1)
- stirrups (1)
- stochastics (1)
- stone consolidation (1)
- stone decay (1)
- strain (1)
- strategic and territorial planning (1)
- strategic limitation (1)
- strategies (1)
- strategy (1)
- strength (1)
- stress (1)
- structural control (1)
- structural design (1)
- structural dynamics (1)
- structural energy (1)
- structural reliability (1)
- structural robustness (1)
- structures (1)
- substitute fuel (1)
- suburbanization (1)
- suction (1)
- suffusion (1)
- superplasticizer (1)
- supplementary cementitious materials (1)
- surface structures (1)
- sustainability assessment (1)
- sustainable conservation (1)
- sustainable development (1)
- sustainable technology (1)
- swelling pressure (1)
- symbolische Bildwelt (1)
- symbolism (1)
- symmetric crypto (1)
- synergy (1)
- system theory (1)
- säurefeste Beschichtungen (1)
- technical management (1)
- technische Bilder (1)
- technische Nutzungsdauer (1)
- teilgesättigte Böden (1)
- temperature (1)
- tensile strength (1)
- tension-stiffening (1)
- test-method (1)
- text reuse (1)
- textural changes (1)
- the bottom-up approach to urban planning (1)
- theater (1)
- theory of architecture (1)
- theory of space (1)
- thermal building simulation (1)
- thermal conductivity (1)
- thermal glazings (1)
- thermal load (1)
- thermal protection (1)
- thermodynamics (1)
- tiefgründige Bodenstabilisierung (1)
- timber (1)
- timber concrete composite (1)
- timber structure (1)
- timber-composite structures (1)
- toll road concessions (1)
- totalitarian city (1)
- town and country planning (1)
- townplanning (1)
- traditional social system (1)
- traditionellen Sozialsystem (1)
- traffic flow (1)
- transfer (1)
- transformation plasticity (1)
- transformationsinduzierte Plastizität (1)
- transition (1)
- transport of energy (1)
- travel behavior (1)
- tuned mass damper (1)
- typology (1)
- ultrasonic laser technique (1)
- uncertain data (1)
- unfinished public works (1)
- uniaxial (1)
- unsaturated soils (1)
- unsaturation (1)
- upwind power plant (1)
- urban agriculture (1)
- urban beekeeping (1)
- urban building (1)
- urban centrality (1)
- urban design (1)
- urban development strategies (1)
- urban heritage (1)
- urban landscape (1)
- urban narratives (1)
- urban partition (1)
- urban reagent (1)
- urban renewal (1)
- urban semiotics (1)
- urban sociology (1)
- urban structures (1)
- urban transformation (1)
- urban virus (1)
- urbanization (1)
- usability (1)
- user interface (1)
- value activity model (1)
- variographie (1)
- verallgemeinerte Kolosov-Muskhelishvili Formeln (1)
- vestimentäre Moderne (1)
- videocall (1)
- videochat (1)
- videoconference (1)
- virtual experiment (1)
- virtuality (1)
- virtueller Versuch (1)
- visueller Komfort (1)
- waste (1)
- water balance (1)
- water-glass (1)
- wave field dispersion (1)
- wave propagation (1)
- wavelet (1)
- weakest-link model (1)
- weighted residual method (1)
- welding (1)
- westliche Kultur (1)
- wood-frame construction (1)
- wood-framed shear walls (1)
- wooden columns (1)
- work accidents (1)
- world heritage sites (1)
- woven composites (1)
- writing assistance (1)
- young concrete (1)
- young pioneers (1)
- zerstörungsfrei (1)
- zyklisch (1)
- µ-3D Computertomografie (1)
- Äthiopien (1)
- Öffentlich Private Partnerschaft (ÖPP) (1)
- Öffentlich Private Partnerschaften (1)
- Öffentliche Bauten (1)
- Öffentliche Verwaltung (1)
- Ökoeffizienz (1)
- Überwachung (1)
- überstöchiometrisches Wasser (1)
Business development and brand management are core functions of a business that fuel corporate growth and drive value for consumers, for companies, and for society. Integrating the two business areas promises synergistic added value that goes beyond their individual impact spectrums. While academic research has collectively advanced our understanding of brand management, research in business development is relatively underrepresented. As a management concept that is of great importance in the corporate world today, the relevance of business development cannot be denied in academia. Moreover, the interrelationship between business development and brand management has been widely neglected. Both business fields benefit from each other, suggesting an exigency for a deeper integration between the two. Towards that goal, this dissertation presents a comprehensive overview of the reciprocal relationship of business development and brand management that further stretches the academic knowledge space.
Throughout the doctoral thesis, the author structures this interrelationship, enhances theory for both business areas and their integration, suggests managerial implications and identifies future research directions that require scholarly attention. The doctoral thesis aims to align business development and brand management theory and practice with the realities of the business world.
In three research papers, this thesis develops an analysis of the reciprocal relationship of business development and brand management. For this purpose, a variety of methods ranging from a systematic literature review and qualitative work to empirical research employing structural equation modeling and experimental studies are applied. Theoretically, business development, innovation management, brand management and sustainability inform the frame of this work. Finally, this research project aims at contributing to (sustainable) business and brand growth.
Bisherige Untersuchungen zum hydraulischen Grundbruch im bindigen Baugrund haben gezeigt, dass der Versagensmechanismus durch hydraulisch induzierte Risse ausgelöst wird. Um umströmte Bauwerke im Grundwasser sicher zu dimensionieren, ist daher ein Nachweis gegen hydraulisch induzierte Rissentstehung unerlässlich. Ein solcher existiert bisher jedoch nicht, da die Rissentstehung in bindigen Böden äußerst komplex ist und die zahlreichen Einflussgrößen nicht ausreichend untersucht sind. Aus diesem Grund wurde im Rahmen dieser Dissertation eine Laborstudie zu hydraulisch induzierter Rissbildung in verschiedenen feinkörnigen Böden in einem neuartigen Triaxialversuch durchgeführt. Aus den zahlreichen Versuchsvarianten lassen sich die wichtigsten Einflussgrößen auf den Widerstand des Bodens gegen Rissentstehung ermitteln. Die experimentelle Arbeit wird durch eine numerische Analyse der Versuchsvariationen ergänzt. Daraus lässt sich eine Hypothese zur Rissentstehung in bindigen Böden ableiten, die in Einklang mit der klassischen Bruchmechanik steht.
In der Welt der Objekte zählt der Schlüssel zu den wichtigsten und ältesten Gebrauchs-gegenständen der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeingültigen Produkts der heutigen Dingwelt in den Fokus gestellt.
Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schlüssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien.
Auf der Grundlage von strukturierten Daten sollen Maßnahmen für eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verständnis für den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu können.
Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verständnis der historischen Untersuchungen, den Erkenntnissen der durchgeführten Studien und einem praxisorientierten Entstehungs-prozess künftige Ideen und Ansätze, eine fortwährende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte förderlich zu betrachten und einsetzen zu können.
Due to the significant number of immigrants in Europe, especially Germany, integration is an ongoing subject of debate. Since the 1970s, with the emergence of the discussions on ‘place,’ it has also been realized that the immigrant experience is associated with location. Nevertheless, due to the challenges in capturing the place and migration relevance, there is a gap in understanding the role of the migrant’s geography of experiences and its outcomes (Phillips & Robinson, 2015).
This research aims to investigate the extent to which both the process of objective integration and the socio-spatial practices of high-skilled Iranian immigrants in Berlin outline and influence their sense of belonging to Berlin as the new “home.” The embedded mixed-method design had employed for this study. The quantitative analysis through Pearson’s correlation technique measured the strength of the association between Iranians’ settlement distribution and the characteristics of Berlins’ districts. The quantitative analysis provides contextual data to get a greater level of understanding of the case study’s interaction with place. The units of place intend to demonstrate the case study’s presence and possible interaction with places around their settlement location that relatively shapes their perception. The qualitative analysis comprises ethnographic fieldwork and semi-structured in-depth interviews with a homogeneous sample of Iranian immigrants in Berlin that provide data on individual and ethnic behaviors and trajectories and analyze the complex interactions between the immigrant’s experience and the role of place.
This research uncovers that Iranian highly skilled immigrants are successful in integrating objectively; However, in regards to their state of belonging, it illustrated the following: The role of socio-ethnic culture of the case study in denotation of home and belonging; Iranian high-skilled immigrants’ efforts towards reaching a level of upward mobility overshadow their attempt to shape social and spatial interaction with Berliners and Berlin itself, which manifests both in their perception and use of urban space; and finally, the identification practice and the boundary-making as an act of reassurance and self-protection against the generalization of adjacent nationalities, demonstrated in the intersection of demographical settlement distribution of Iranians in Berlin and the ethnic diversity, impact the sense of belonging and place-making.
Die Genese der Thüringer Kunstvereinslandschaft im ausgehenden 19. und frühen 20. Jahrhundert
(2023)
Zu Beginn des 19. Jahrhunderts existierten in Deutschland noch keine öffentlichen Museen, welche sich der Präsentation von Kunst widmeten und dem zeitgenössischen Kunstschaffen einen Raum bieten konnten. In den Genuss von Malerei und bildender Kunst kamen damit lediglich jene gesellschaftlichen Stände, denen durch Macht, Prestige und Adelszugehörigkeit dieses Privileg zu Teil wurde. Als neue Form des Erwachens der Bourgeoisie entwickelt, repräsentierten die sich im Entstehen befindlichen Kunstvereine erstmalig eine wirkungsvolle, dem Adel den Vormachtanspruch auf Kunst und Kultur entreißende Instanz, welche die Möglichkeit der öffentlichen Kunstvermittlung und Präsentation boten. Zwischen 1860 und 1945 entstand auf dem Gebiet des heutigen Landes Thüringen eine Unzahl an Kunstvereinen, Künstlerbünden und Kunstgesellschaften, welche die Gegenwartskunst und ihre lokalen Künstler förderten. Nach dem Ende des Zweiten Weltkrieges verschwanden diese Förderer jedoch gänzlich von der Bildfläche und ihr Wirken geriet in Vergessenheit. Bisher fand die Vergangenheit dieser Kunstvereine und -bünde nur wenig Aufmerksamkeit in der Kunstgeschichtsbetrachtung. Daher versucht die vorliegende Dissertation die Konstitutionen, Strukturen, die Wirksamkeit und den Einsatz für die (moderne) Kunst von 15 Kunstvereinen, -gesellschaften und Künstlervereinen nachzuzeichnen und damit längst überfällige Erkenntnisse der Beitragsleistung zur Kulturtätigkeit der Institutionen zu erbringen. Das Überblickswerk leistet einen ersten Vorstoß in die noch weithin unbekannten Kunstvereinsgefilde in Thüringen, vor allem auch im Kontext des nationalen Gefüges. Die historische Betrachtung, die Darstellung der Ausstellungspraxis und die finanziellen Handlungsrahmen sollen als direkte Vergleichsansätze die primäre Gegenüberstellung erleichtern.
Gründungsunternehmen stehen vor der Herausforderung, eine unternehmerische Leistung zu entwickeln und gleichzeitig eine Markenidentität aufzubauen. Dabei sind sie mit finanziellen, personellen und strukturellen Besonderheiten konfrontiert, aber auch mit Unbekanntheit und Kundenunsicherheit. Die Dissertation zielt darauf ab, durch die Analyse markenbildender Strategiepraktiken einen Beitrag zur wissenschaftlichen Auseinandersetzung mit der Markenbildung bei Gründungsunternehmen zu leisten und praktische Implikationen für angehende Gründer:innen sowie akademische Startup-Inkubatoren abzuleiten.
Der Fokus liegt dabei auf Gründungsvorhaben und Startups in der Vorgründungs- oder frühen Gründungsphase aus dem Hochschulumfeld. Zur Analyse markenbildender Strategiepraktiken wird der Strategy-as-Practice Ansatz (SAP) angewendet. Die qualitative Forschungsmethodik wird genutzt, um Handlungsmuster bestimmter Akteursgruppen in diesem spezifischen Kontext zu rekonstruieren. Beobachtungen, Interviews und Dokumente im Feld dienen als Grundlage für die Forschung.
Die Ergebnisse dieser Arbeit liefern umfassende Einblicke in die markenbildende Praxis bei Gründungsunternehmen. Auf Basis dieser Erkenntnisse wurde ein Modell entwickelt, das Komponenten beschreibt, die zusammen einen Handlungsrahmen für die Markenbildung in emergenten Strategiekontexten wie der Unternehmensgründung bilden. Dieses Modell bietet die Möglichkeit, sich vor dem Hintergrund der gründungsspezifischen Rahmenbedingungen mit der Markenentwicklung in der frühen Gründungsphase auseinanderzusetzen und sie systematisch in das Gründungsvorhaben zu implementieren.
Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und Ökologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang.
Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte führt verstärkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und geprüft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte geprüft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt.
Aufgrund der hohen Anforderungen an Konstruktion, Qualität und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegenüber Ortbeton. Die hohe Oberflächenqualität und Dauerhaftigkeit aber auch die Gleichmäßigkeit und witterungsunabhängige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erwähnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen möglich wird.
Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Frühfestigkeitsentwicklung. Hohe Frühfestigkeiten sind Voraussetzung für einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb ermöglicht. Oft werden zur Sicherstellung hoher Frühfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer Wärmebehandlung eingesetzt. Unter dieser Prämisse ist eine ökologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht möglich.
In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingeführt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Darüber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen.
In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zunächst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitfähigkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfläche sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am stärksten beeinflusst wird.
In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verdünnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der Lösung abhängt. Je niedriger die Portlanditkonzentration, desto größer ist die Beschleunigung. Ergänzende Untersuchungen der Ionenkonzentration der Lösung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am stärksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verdünnten Suspensionen bestätigen und infolge der Beschallung ein früheres Auftreten und einen größeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim während der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel früher auftreten, sondern kleiner sind und fein verteilt über die Oberfläche des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft für den sich anschließenden regulären Strukturaufbau angesehen.
Im nächsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine Änderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine Änderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erhärtungsverhalten auswirken.
Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchsplänen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erhärtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt.
Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag verändert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erhöht werden. Bei Überschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abhängig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden.
Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, können die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abhängigkeit des Energieeintrages die fließmittelbedingte Verzögerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist.
Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verkürzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann.
Im nächsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinskörnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung größerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Darüber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgeführt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet.
Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Frühdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich früher erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines Überdruckes in der Beschallkammer oder einer Kühlung der Suspension während der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Frühdruckfestigkeiten der ungekühlten beziehungsweise drucklosen Variante nicht mehr erreicht.
In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-stündige Wärmebehandlung vollständig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kieselsäure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden.
In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung stärker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 für weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit höherem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden können. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließfähigkeit bei höheren w/z-Werten beschrieben wird.
Für diese Betonrezeptur wird ein Vergleich mit einem kommerziell erhältlichen Erhärtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien führt zu einer weiteren deutlichen Steigerung der Frühfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann.
In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universitären Ausgründung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den Überlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilität gelegt und gezeigt, dass das ultraschallgestütze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung für eine ökologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden.
Das Wissen um den realen Zustand eines Bauprojektes stellt eine entscheidende Kernkompetenz eines steuernden bauausführenden Unternehmens dar. Der bewusste Umgang mit Informationen und deren effiziente Nutzung sind entscheidende Erfolgsfaktoren für die zeit-, kosten- und qualitätsgerechte Realisierung von Bauprojekten.
Obwohl die erforderlichen Erfolgsfaktoren bekannt sind, sind Kosten- und Terminüberschreitungen von Bauprojekten keine Seltenheit – eher das Gegenteil ist der Fall.
Zukunftsweisende Digitalisierungsprojekte aber geben Anlass zu Hoffnung. Ein Beispiel ist der bereits im Dezember 2015 vom Bundesministerium für Verkehr und digitale Infrastruktur ins Leben gerufene Stufenplan Digitales Planen und Bauen. Dieser hat die Aufgabe flächendeckend die Methodik des Building Information Modeling (BIM) im Infrastrukturbereich einzuführen und somit die Digitalisierung in Deutschland zukunftsweisend voranzutreiben,
indem erfolgreiche Bauprojekte mit durchgängigen Informationsflüssen arbeiten. Seither existiert eine Vielzahl an Digitalisierungsprojekten, alle mit gleichen Zielen. Nachweislich
lassen sich hinsichtlich dessen allerdings auch vermehrt Defizite aufzeigen. So ist der
Fortschritt sehr heterogen verteilt und lässt sich für die Branche nicht allgemeingültig festlegen.
Mit einer internationalen Literaturrecherche sowie einer empirischen Studie als Untersuchungsmethode wurde in Form von Interviews mit Fachkundigen der tatsächliche Zustand der Digitalisierungs- und der BIM-Anwendungen im Straßenbau für den
Controllingprozess der Bauleistungsfeststellung untersucht. Die erhobenen Daten wurden
aufbereitet und anschließend softwaregestützt einer inhaltlichen Analyse unterzogen. In
Kombination mit den Ergebnissen der Literaturrecherche wurden notwendige Anforderungen
für den Controllingprozess der Bauleistungsfeststellung erhoben. Auf dieser Grundlage wurde
ein Modell im Sinne der Systemtheorie zur Optimierung der Bauleistungsfeststellung
entwickelt. Gegenstand der vorliegenden Arbeit ist die Integration der modellbasierten Arbeitsweise in die Prozesse der Bauleistungsfeststellung eines Bauunternehmens. Grundlage ist die objektive Auswertung des Fertigstellungsgrades (Baufortschrittes) mittels Luftbildaufnahmen. Deren Auswertung auf Basis eines Algorithmus und die systematische Identifikation des Baufortschrittes integriert in den Prozess der Bauleistungsfeststellung werden zu einem neu entwickelten Gesamtsystem mit dem Ergebnis eines optimierten Modells.
Das entwickelte Modell wurde hinsichtlich Anwendbarkeit und praktischer Relevanz an
ausgewählten Beispielszenarien untersucht und nachgewiesen.
Audiovisuelles Cut-Up
(2023)
Diese Forschungsarbeit bezeichnet und analysiert ein ästhetisches Phänomen audiovisueller Arbeiten mit sehr schnellen Schnitten. Der Begriff „Audiovisuelles Cut-Up“ wird vorgeschlagen um dieses Phänomen zu bezeichnen. Verschiedenste audiovisuelle Arbeiten aus unterschiedlichen Kontexten werden analysiert, welche das formale Kriterium von extrem kurzen Einstellungen erfüllen – einschließlich der eigenen Forschungsbeiträge des Autors. Die Werkzeuge und Technologien, welche die neuartige Ästhetik ermöglichten werden vorgestellt. Oftmals wurden diese von den Künstlern selbst geschaffen, da fertige Lösungen nicht verfügbar waren. Audiovisuelle Cut-Ups werden nach Kontext und Medium systematisiert und verortet. Es schließen sich Beobachtungen an, in wie fern Audio und Video sich in ihrem Charakter unterscheiden, was die kleinste wahrnehmbare Einheit ist und welche Rolle Latenzen und Antizipation bei der Wahrnehmung von audiovisuellen Medien spielen.
Drei Hauptthesen werden Aufgestellt: 1. Audiovisuelles Cut-Up hat die Kraft winzige, vormals überdeckte Details deutlich zu machen. Damit kann es das Quellmaterial verdichten aber auch den Inhalt manipulieren. 2. Technische Entwicklungen haben das audiovisuelle Cut-Up hervorgerufen. 3. Heute ist die Ästhetik als ein Stilmittel im Werkzeugkasten audiovisueller Gestaltung etabliert.
The most fundamental understating of hybridization methodology takes the form of stable but dynamic notions, accumulated over time in the memory of individuals. Schematized and abstracted, the hybrids representation needs to be reproduced and reused in order to reconstruct and bring back other memories. Reinvented, or reused hybrids can support getting access to social, traditional, religious understanding of nations. In this manner, they take the form of the messenger / the mediator an innate, equivalent to the use of mental places in the art of memory. We remember mythology in order to remember other things.
From individual memory perspective, or group collective memory, the act of recollection is assumed to be an individual act, biologically based in the brain, but by definition conditioned by social collectives. Following Halbwachs, this thesis does not recognize a dichotomy between individual and collective memory as two different types of remembering. Conversely, the collective is thought of as inherent to individual thought, questioning perspectives that regard individual recollection as isolated from social settings. The individual places himself in relation to the group and makes use of the collective frameworks of thought when he localizes and reconstructs the past, whether in private or in social settings. The frameworks of social relations, of time, and of space are constructs originating in social interaction and distributed in the memory of the group members. The individual has his own perspective on the collective frameworks of the group, and the group’s collective frameworks can be regarded as a common denominator of the individual outlooks on the framework.
In acts of remembering, the individual may actualize the depicted symbols in memory, but he could also employ precepts from the environment. The latter have been referred to as material or external frameworks of memory, suggesting their similar role as catalysts for processes of remembrance such as that of the hybrids in my paintings. It is only with reference to the hybrids, who work as messengers / mediators with a dual nature, that communicate between the past and the present, the internal and external space, that individual memory and group memory is in focus.
The exhibition at the Egyptian museum in Leipzig is my practical method to create a communicative memory, using hybrids as mediators in cultural transimission, as when the act refers to informal and everyday situations in which group members informally search for the past, it takes place in the communicative
162
memory. As explained in chapter one, the exhibition at the Egyptian museum in Leipzig is an act of remembering in search for the past with support of my paintings, which then can considered as part of the cultural memory.
In addition to the theoretical framework summarized above, I have applied my hypothesis practically in the form of the public exhibition, and shared the methodology with public audience from Cairo / Egypt and Leipzig / German in the form of visual art workshops and open discussions. I have also suggested an analyzed description of the meaning of hybrids in my artwork as mediators and messengers for the purpose of cultural transmission, as well as in relation to other artists’ work and use of a similar concept.
By using my hybrid creatures in my visual artwork, I am creating a bridge, mediators to represent both the past and the present, what we remember of the past, and how we understand the past. It is as explained in chapter two; that the hybridization methodology in terms of double membership represented in different cultures –Cairo / Egypt and Leipzig / Germany- can provide a framework which allows artistic discussions and could be individually interpreted, so individual cultures / individual memory can become transparent without losing their identities and turn into communicative memory. This transmission through the hybridization theoretical approech was explicitly clarified with the support of Krämer’s hypothesis. The practical attempt was examined by creating a relationship between the witness –me as an artist– and the audience –the exhibition visitors–, to cross space and time, not to bridge differences, rather to represent the contrasts transparently.
The Kin-making proposition is adopted by many academics and scholars in modern society and theoretical research; the topic was represented in the roots of the ancient Egyptian mindset and supported theoretically by similar understandings such as Haraway’s definition of kin-making. The practical implementation of kin- making can be observed in many of my artwork and was analyzed visually and artistically in chapter three.
My practical project outcome tested success by using hybrids in my paintings as mediators, it opened a communicative artistic discussion. This methodology gave a possible path of communication through paintings / visual analyses, and offered relativity through image self-interpretation.
Modell bedarfsorientierter Leistungserbringung im FM auf Grundlage von Sensortechnologien und BIM
(2023)
Während der Digitalisierung im Bauwesen insbesondere im Bereich der Planungs- und Errichtungsphase von Bauwerken immer größere Aufmerksamkeit zuteilwird, ist das digitale Potenzial im Facility Management weit weniger ausgeschöpft, als dies möglich wäre. Vor dem Hintergrund, dass die Bewirtschaftung von Gebäuden jedoch einen wesentlichen Kostenanteil im Lebenszyklus darstellt, ist eine Fokussierung auf digitale Prozesse im Gebäudebetrieb erforderlich. Im Facility Management werden Dienstleistungen häufig verrichtungsorientiert, d. h. nach statischen Intervallen, oder bedarfsorientiert erbracht. Beide Arten der Leistungserbringung weisen Defizite auf, beispielweise weil Tätigkeiten auf Basis definierter Intervalle erbracht werden, ohne dass eine Notwendigkeit besteht oder weil bestehende Bedarfe mangels Möglichkeiten der Bedarfsermittlung nicht identifiziert werden. Speziell die Definition und Ermittlung eines Bedarfs zur Leistungserbringung ist häufig subjektiv geprägt. Auch sind Dienstleister oft nicht in frühen Phasen der Gebäudeplanung involviert und erhalten für ihre Dienstleistungen notwendige Daten und Informationen erst kurz vor Inbetriebnahme des zu betreibenden Gebäudes.
Aktuelle Ansätze des Building Information Modeling (BIM) und die zunehmende Verfügbarkeit von Sensortechnologien in Gebäuden bieten Chancen, die o. g. Defizite zu beheben.
In der vorliegenden Arbeit werden deshalb Datenmodelle und Methoden entwickelt, die mithilfe von BIM-basierten Datenbankstrukturen sowie Auswertungs- und Entscheidungsmethodiken Dienstleistungen der Gebäudebewirtschaftung objektiviert und automatisiert auslösen können. Der Fokus der Arbeit liegt dabei auf dem Facility Service der Reinigungs- und Pflegedienste des infrastrukturellen Facility Managements.
Eine umfangreiche Recherche etablierter Normen und Standards sowie öffentlich zugänglicher Leistungsausschreibungen bilden die Grundlage der Definition erforderlicher Informationen zur Leistungserbringung. Die identifizierten statischen Gebäude- und Prozessinformationen werden in einem relationalen Datenbankmodell strukturiert, das nach einer Darstellung von Messgrößen und der Beschreibung des Vorgehens zur Auswahl geeigneter Sensoren für die Erfassung von Bedarfen, um Sensorinformationen erweitert wird. Um Messwerte verschiedener und bereits in Gebäuden existenten Sensoren für die Leistungsauslösung verwenden zu können, erfolgt die Implementierung einer Normierungsmethodik in das Datenbankmodell. Auf diese Weise kann der Bedarf zur Leistungserbringung ausgehend von Grenzwerten ermitteln werden. Auch sind Verknüpfungsmethoden zur Kombination verschiedener Anwendungen in dem Datenbankmodell integriert. Zusätzlich zur direkten Auslösung erforderlicher Aktivitäten ermöglicht das entwickelte Modell eine opportune Auslösung von Leistungen, d. h. eine Leistungserbringung vor dem eigentlich bestehenden Bedarf. Auf diese Weise können tätigkeitsähnliche oder räumlich nah beieinander liegende Tätigkeiten sinnvoll vorzeitig erbracht werden, um für den Dienstleister eine Wegstreckeneinsparung zu ermöglichen. Die Arbeit beschreibt zudem die für die Auswertung, Entscheidungsfindung und Auftragsüberwachung benötigen Algorithmen.
Die Validierung des entwickelten Modells bedarfsorientierter Leistungserbringung erfolgt in einer relationalen Datenbank und zeigt simulativ für unterschiedliche Szenarien des Gebäudebetriebs, dass Bedarfsermittlungen auf Grundlage von Sensortechnologien erfolgen und Leistungen opportun ausgelöst, beauftragt und dokumentiert werden können.
Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies.
Die fortschreitende Digitalisierung lässt innovative bauprojekt- und unternehmensinterne Workflows sowie Organisationssysteme entstehen. In diesem Zusammenhang ist die digitale Fortentwicklung durch Building Information Modeling [BIM] als Veränderungsprozess zu definieren, der Organisationsstrukturen nachhaltig umformen wird. BIM ist die führende digitale Arbeitsmethodik im Bauwesen, die entwurfs-, ausführungs- und bauprojektbezogenen Belangen gerecht werden kann. Die deutsche Bauwirtschaft ist im Vergleich zu anderen Branchen jedoch als digital rückständig zu betrachten. Sie ist durch einen Markt gekennzeichnet, an dem kleine und mittelständische Unternehmen [KMU] in hoher Zahl vertreten sind. Aufgrund von Anwendungsunkenntnis der kleinen und mittelständischen Unternehmen fehlt der flächendeckende und durchgängige BIM-Einsatz in Projekten. Mit dem Fokus auf dem Bauprojekt als temporärer Organisation adressiert der vorliegende Forschungsschwerpunkt die Schaffung eines realistischen Abbilds erprobter BIM-Anwendungsfälle in Modellprojekten. Herausgearbeitet werden derzeit bestehende BIM-Herausforderungen für Erstanwender, die die durchgängige BIM-Anwendung in Deutschland bisher hemmen.
Die Forschungsarbeit fokussiert sich auf die Evaluation erfolgskritischer Faktoren [ekF] in BIM-Anwendungsfällen [AWF] im Rahmen einer qualitativen Inhaltsanalyse. Die digitale Transformation birgt strukturrelevante Veränderungsdeterminanten für Organisationen durch die BIM-Anwendung und außerdem Herausforderungen, die in der Anwendungsfallforschung betrachtet werden.
Die Zielstellung ist dreiteilig. Ein entwickeltes BIM-Strukturmodell erfasst die aktuelle Richtlinienarbeit sowie Standardisierung und stellt dadurch den Rahmen notwendiger BIM-Strukturen im Bauprojekt auf. Aus dem Strukturmodell ist ein Modell zur Prüfung von Anwendungsfallrisiken abgeleitet worden. Dieses wird auf gezielt recherchierte BIM-Modellprojekte in Deutschland angewendet, um aus den erfolgskritischen Faktoren der darin praktizierten BIM-Anwendungsfälle eine ekF-Risikomatrix abzuleiten. Daraus geht ein unterstützendes BIM-Anwendungsinstrument in Form von BPMN-Abläufen für KMU hervor. Resultierend aus der Verbindung des BIM-Strukturmodels und der Anwendungsfallanalyse wird in den einzelnen Ablaufübersichten eine Risikoverortung je Anwendungsfall kenntlich gemacht. Unternehmen ohne BIM-Anwendungsexpertise in Bauprojektorganisationen erhalten auf diese Weise einen instrumentellen und niederschwelligen Zugang zu BIM, um die kollaborativen und wirtschaftlichen Vorteile der digitalen Arbeitsmethodik nutzen zu können.
Die Form der Datenbank
(2023)
Datenbanken sind heute die wichtigste Technik zur Organisation und Verarbeitung von Daten. Wie wurden sie zu einer der allgegenwärtigsten und gleichzeitig unsichtbarsten Praxis, die menschliche Zusammenarbeit ermöglicht? Diese Studie beginnt mit einer historiographischen Erkundung der zentralen medialen Konzepte von Datenbanken und mündet in das praxeologische Konzept der "Daten als Formation", kurz: In-Formation.
Der erste Hauptteil befasst sich mit der Formatierung von Daten durch die Verarbeitung strukturierter Daten mittels relationaler Algebra. Es wird erarbeitet, auf welche Weise Struktur neues Wissen schafft. Im zweiten Teil wird erörtert, wie Datenbanken durch den diagrammatisch-epistemischen Raum der Tabelle operationalisiert werden. Drittens untersucht die Studie Transaktionen als Erklärungen dafür, wie Daten und reale Handlungen koordiniert und synchronisiert werden können.
Im zweiten Hauptteil wird untersucht, wie relationale Datenbanken zunehmend zum Zentrum von Softwareanwendungen und Infrastrukturen wurden, wobei der Schwerpunkt auf wirtschaftlichen Praktiken liegt. In einem vergleichenden Ansatz wird anhand von Fallstudien in der DDR der 1970er bis 1990er Jahren die Frage gestellt, ob es eine „sozialistische“ Datenbankmanagement-Software gegeben hat. Dabei werden die „westlichen“ Produktionsdatenbanken BOMP, COPICS und MAPICS (IBM) sowie R2 (SAP) im Zusammenspiel mit den ostdeutschen Sachgebietsorientierten Programmiersystemen (SOPS) von Robotron diskutiert. Schließlich untersucht dieser Teil, wie die DDR ihr eigenes relationales Datenbankmanagementsystem, DABA 1600, entwickelte und dabei „westliche“ Technologie neu interpretierte.
Das abschließende Kapitel fasst die Konzepte der relationalen Datenbanken als heute wichtigsten Datenorganisationstechnik zusammen. Es erörtert, inwiefern es möglich ist, die historiographische Erzählung über die Entstehung von Datenbankmanagementsystemen und ihre Folgen für die Geschichte der Informatik zu dezentrieren. Es schließt mit der Erkenntnis, dass östliche und westliche Medien der Kooperation sich in Form und Funktion erstaunlich ähnlich sind, beide wurzeln in den tiefen Genealogien von organisatorischen und wissensbildenden Datenpraktiken.
Neben dieser medienwissenschaftlichen Arbeit besteht die Dissertation aus einem künstlerischen Teil, der dokumentiert wird: Anhand einer Reihe von Vlogs erkundet die fiktionale Figur „Data Proxy“ aktuelle Datenökologien.
In this work, practice-based research is conducted to rethink the understanding of aesthetics, especially in relation to current media art. Granted, we live in times when technologies merge with living organisms, but we also live in times that provide unlimited resources of knowledge and maker tools. I raise the question: In what way does the hybridization of living organisms and non-living technologies affect art audiences in the culture that may be defined as Maker culture? My hypothesis is that active participation of an audience in an artwork is inevitable for experiencing the artwork itself, while also suggesting that the impact of the umwelt changes the perception of an artwork. I emphasize artistic projects that unfold through mutual interaction among diverse peers, including humans, non-human organisms, and machines. In my thesis, I pursue collaborative scenarios that lead to the realization of artistic ideas: (1) the development of ideas by others influenced by me and (2) the materialization of my own ideas influenced by others. By developing the scenarios of collaborative work as an artistic experience, I conclude that the role of an artist in Maker culture is to mediate different types of knowledge and different positions, whereas the role of the audience is to actively engage in the artwork itself. At the same time, aesthetics as experience is triggered by the other, including living and non-living actors. It is intended that the developed methodologies could be further adapted in artistic practices, philosophy, anthropology, and environmental studies.
Anhand der städtebaulichen und sozialen Transformation des östlichen Gründerzeitgebietes von Leipzig wird die Rolle von migrantischen Hausbesitzenden und in der Bausanierung Tätigen im Aufwertungsprozess untersucht. Der Zugang zum Gegenstand verbindet Fragen der Stadtsoziologie und der Denkmalforschung. Im sozialen Feld der Stadterneuerung wird die Revitalisierung des ehemals von Leerstand und Rückbau betroffenen Baubestandes ausgehandelt. Die Positionen der Akteur:innen im Feld werden durch ihre Ausstattung mit ökonomischem, aber auch sozialem und kulturellem Kapital bestimmt. Angehörige der Planungs- und Denkmalbehörden verfügen über institutionalisiertes Kulturkapital und stehen damit Kleineigentümer:innen, häufig Autodidakt:innen, gegenüber. Baudenkmale können über ihre Funktion als Geldanlage und Wohnraum hinaus Status repräsentieren und symbolisch angeeignet werden. Denkmalschutz dient dem öffentlichen Interesse am Erhalt historischer Bausubstanz. Bei Sanierungen bestehen die Herausforderungen der Vereinbarkeit von Konservierung und Modernisierung, der Finanzierbarkeit für Eigentümer:innen und der Sozialverträglichkeit für Bewohnende. Eine Darstellung der historischen Entwicklung des Leipziger Ostens zu Beginn der Analyse veranschaulicht die Abhängigkeit kultureller, sozialer und ökonomischer Werte des Baubestandes vom jeweiligen gesellschaftlichen Kontext. Planerische Konzepte für das Gebiet zeigen, dass eine sozioökonomische Stabilisierung und Imageverbesserung erreicht werden sollte durch das Aufgreifen von Potentialen, wie den denkmalgeschützten Bauten, dem zuziehenden alternativen Milieu und migrantischer Ökonomie. Es wird deutlich, dass nach einer initialen Ansässigkeit von Pionier:innen die öffentlichen Infrastrukturmaßnahmen und Denkmalausweisungen eine Inwertsetzung v. a. durch externe Anlegende vorbereiteten. Darauf aufbauend wurden anhand einer qualitativen Befragung die Erfahrungen von städtischen Mitarbeitenden, Fachleuten und im Quartier Engagierten denen von lokalen migrantischen Hausbesitzenden und im Bereich Sanierung Tätigen gegenübergestellt. Migrant:innengruppen haben den Stadtraum in einer Phase vorherrschender Abwanderung durch die Eröffnung von Geschäften und Institutionen sowie den Erwerb von Immobilien für sich erschlossen. Strukturelle Benachteiligungen, wie Diskriminierung auf dem Arbeitsmarkt, ihre Ansässigkeit im sozial stigmatisierten Gebiet sowie geringes ökonomisches Kapital versuchten sie durch den Einsatz von sozialem Kapital auszugleichen. Sanierungen erfolgten mit hoher Eigenleistung und Rückgriff auf private Netzwerke. Die Analyse des Erneuerungsprozesses im Leipziger Osten zeigt, dass in einer initialen Phase Pionier:innen von Planenden und der Denkmalpflege als essentiell für die Entwicklung angesehen wurden. Günstige Instandsetzungen durch Kleineigentümer:innen wurden akzeptiert, um Gebäude vor weiterem Verfall zu bewahren. Mit der zunehmenden Forderung nach Verwendung hochwertiger Materialen werden die Sanierungsleistungen nach ästhetischen und letztlich ökonomischen Kriterien bewertet. Gegenüber sozialen Folgen einer Aufwertung von Bausubstanz lässt sich eine unkritische Haltung der Denkmalpflege erkennen. Bei der Vermarktung der Bestände durch professionelle Investierende findet die Sozialgeschichte des Stadtteils wenig Berücksichtigung, positiv besetzte Merkmale des Quartiers, wie Multikulturalität werden selektiv aufgegriffen. Der Anteil migrantischer Akteur:innen an der Entwicklung wird durch die Öffentlichkeit unzureichend anerkannt. Auch die Wertschätzung von Planenden und im Quartier Engagierten erfolgt v. a. anhand des ökonomischen Status. Hohe Erwartungen an die Geschäftsstruktur und die Erscheinung des Straßenbildes können nicht erfüllt werden. Migrantische Hausbesitzende und im Bereich Sanierung Tätige benötigen für die Auseinandersetzung mit der Denkmalpflege kulturelles Kapital. Sie erkennen die Bedeutung des historischen Baubestandes für die Stadt und die Arbeit der Institution an, kritisieren jedoch Sanierungsauflagen bzw. Mitarbeitende der Denkmalpflege und können sich z. T. gegen diese behaupten. Lokale migrantische Kleineigentümer:innen leisten durch ihre Quartiersbindung einen Beitrag zur ökonomischen und sozialen Stabilisierung. Mit ihrer Aufstiegsorientierung fördern sie in der Vermietungspraxis jedoch nur bedingt die Integration anderer Migrant:innen und grenzen sich von statusniedrigen Gruppen im Quartier ab. Migrantische Hausbesitzende und Unternehmende nehmen sich selbst als erfolgreiche Vorreitende in einer heterogener werdenden ostdeutschen Stadtgesellschaft wahr. Sie erkannten frühzeitig das Entwicklungspotential und gehören zu den Initiierenden und Profitierenden der Inwertsetzung.
Search engines are very good at answering queries that look for facts. Still, information needs that concern forming opinions on a controversial topic or making a decision remain a challenge for search engines. Since they are optimized to retrieve satisfying answers, search engines might emphasize a specific stance on a controversial topic in their ranking, amplifying bias in society in an undesired way. Argument retrieval systems support users in forming opinions about controversial topics by retrieving arguments for a given query. In this thesis, we address challenges in argument retrieval systems that concern integrating them in search engines, developing generalizable argument mining approaches, and enabling frame-guided delivery of arguments.
Adapting argument retrieval systems to search engines should start by identifying and analyzing information needs that look for arguments. To identify questions that look for arguments we develop a two-step annotation scheme that first identifies whether the context of a question is controversial, and if so, assigns it one of several question types: factual, method, and argumentative. Using this annotation scheme, we create a question dataset from the logs of a major search engine and use it to analyze the characteristics of argumentative questions. The analysis shows that the proportion of argumentative questions on controversial topics is substantial and that they mainly ask for reasons and predictions. The dataset is further used to develop a classifier to uniquely map questions to the question types, reaching a convincing F1-score of 0.78.
While the web offers an invaluable source of argumentative content to respond to argumentative questions, it is characterized by multiple genres (e.g., news articles and social fora). Exploiting the web as a source of arguments relies on developing argument mining approaches that generalize over genre. To this end, we approach the problem of how to extract argument units in a genre-robust way. Our experiments on argument unit segmentation show that transfer across genres is rather hard to achieve using existing sequence-to-sequence models.
Another property of text which argument mining approaches should generalize over is topic. Since new topics appear daily on which argument mining approaches are not trained, argument mining approaches should be developed in a topic-generalizable way. Towards this goal, we analyze the coverage of 31 argument corpora across topics using three topic ontologies. The analysis shows that the topics covered by existing argument corpora are biased toward a small subset of easily accessible controversial topics, hinting at the inability of existing approaches to generalize across topics. In addition to corpus construction standards, fostering topic generalizability requires a careful formulation of argument mining tasks. Same side stance classification is a reformulation of stance classification that makes it less dependent on the topic. First experiments on this task show promising results in generalizing across topics.
To be effective at persuading their audience, users of an argument retrieval system should select arguments from the retrieved results based on what frame they emphasize of a controversial topic. An open challenge is to develop an approach to identify the frames of an argument. To this end, we define a frame as a subset of arguments that share an aspect. We operationalize this model via an approach that identifies and removes the topic of arguments before clustering them into frames. We evaluate the approach on a dataset that covers 12,326 frames and show that identifying the topic of an argument and removing it helps to identify its frames.
Biomembranes are selectively permeable barriers that separate the internal components of the cell from its surroundings. They have remarkable mechanical behavior which is characterized by many phenomena, but most noticeably their fluid-like in-plane behavior and solid-like out-of-plane behavior. Vesicles have been studied in the context of discrete models, such as Molecular Dynamics, Monte Carlo methods, Dissipative Particle Dynamics, and Brownian Dynamics. Those methods, however, tend to have high computational costs, which limited their uses for studying atomistic details. In order to broaden the scope of this research, we resort to the continuum models, where the atomistic details of the vesicles are neglected, and the focus shifts to the overall morphological evolution. Under the umbrella of continuum models, vesicles morphology has been studied extensively. However, most of those studies were limited to the mechanical response of vesicles by considering only the bending energy and aiming for the solution by minimizing the total energy of the system. Most of the literature is divided between two geometrical representation methods; the sharp interface methods and the diffusive interface methods. Both of those methods track the boundaries and interfaces implicitly. In this research, we focus our attention on solving two non-trivial problems. In the first one, we study a constrained Willmore problem coupled with an electrical field, and in the second one, we investigate the hydrodynamics of a vesicle doublet suspended in an external viscous fluid flow.
For the first problem, we solve a constrained Willmore problem coupled with an electrical field using isogeometric analysis to study the morphological evolution of vesicles subjected to static electrical fields. The model comprises two phases, the lipid bilayer, and the electrolyte. This two-phase problem is modeled using the phase-field method, which is a subclass of the diffusive interface methods mentioned earlier. The bending, flexoelectric, and dielectric energies of the model are reformulated using the phase-field parameter. A modified Augmented-Lagrangian (ALM) approach was used to satisfy the constraints while maintaining numerical stability and a relatively large time step. This approach guarantees the satisfaction of the constraints at each time step over the entire temporal domain.
In the second problem, we study the hydrodynamics of vesicle doublet suspended in an external viscous fluid flow. Vesicles in this part of the research are also modeled using the phase-field model. The bending energy and energies associated with enforcing the global volume and area are considered. In addition, the local inextensibility condition is ensured by introducing an additional equation to the system. To prevent the vesicles from numerically overlapping, we deploy an interaction energy definition to maintain a short-range repulsion between the vesicles. The fluid flow is modeled using the incompressible Navier-Stokes equations and the vesicle evolution in time is modeled using two advection equations describing the process of advecting each vesicle by the fluid flow. To overcome the velocity-pressure saddle point system, we apply the Residual-Based Variational MultiScale (RBVMS) method to the Navier-Stokes equations and solve the coupled systems using isogeometric analysis. We study vesicle doublet hydrodynamics in shear flow, planar extensional flow, and parabolic flow under various configurations and boundary conditions.
The results reveal several interesting points about the electrodynamics and hydrodynamics responses of single vesicles and vesicle doublets. But first, it can be seen that isogeometric analysis as a numerical tool has the ability to model and solve 4th-order PDEs in a primal variational framework at extreme efficiency and accuracy due to the abilities embedded within the NURBS functions without the need to reduce the order of the PDE by creating an intermediate environment. Refinement whether by knot insertion, order increasing or both is far easier to obtain than traditional mesh-based methods. Given the wide variety of phenomena in natural sciences and engineering that are mathematically modeled by high-order PDEs, the isogeometric analysis is among the most robust methods to address such problems as the basis functions can easily attain high global continuity.
On the applicational side, we study the vesicle morphological evolution based on the electromechanical liquid-crystal model in 3D settings. This model describing the evolution of vesicles is composed of time-dependent, highly nonlinear, high-order PDEs, which are nontrivial to solve. Solving this problem requires robust numerical methods, such as isogeometric analysis. We concluded that the vesicle tends to deform under increasing magnitudes of electric fields from the original sphere shape to an oblate-like shape. This evolution is affected by many factors and requires fine-tuning of several parameters, mainly the regularization parameter which controls the thickness of the diffusive interface width. But it is most affected by the method used for enforcing the constraints. The penalty method in presence of an electrical field tends to lock on the initial phase-field and prevent any evolution while a modified version of the ALM has proven to be sufficiently stable and accurate to let the phase-field evolve while satisfying the constraints over time at each time step. We show additionally the effect of including the flexoelectric nature of the Biomembranes in the computation and how it affects the shape evolution as well as the effect of having different conductivity ratios. All the examples were solved based on a staggered scheme, which reduces the computational cost significantly.
For the second part of the research, we consider vesicle doublet suspended in a shear flow, in a planar extensional flow, and in a parabolic flow. When the vesicle doublet is suspended in a shear flow, it can either slip past each other or slide on top of each other based on the value of the vertical displacement, that is the vertical distance between the center of masses between the two vesicles, and the velocity profile applied. When the vesicle doublet is suspended in a planar extensional flow in a configuration that resembles a junction, the time in which both vesicles separate depends largely on the value of the vertical displacement after displacing as much fluid from between the two vesicles. However, when the vesicles are suspended in a tubular channel with a parabolic fluid flow, they develop a parachute-like shape upon converging towards each other before exiting the computational domain from the predetermined outlets. This shape however is affected largely by the height of the tubular channel in which the vesicle is suspended. The velocity essential boundary conditions are imposed weakly and strongly. The weak implementation of the boundary conditions was used when the velocity profile was defined on the entire boundary, while the strong implementation was used when the velocity profile was defined on a part of the boundary. The strong implementation of the essential boundary conditions was done by selectively applying it to the predetermined set of elements in a parallel-based code. This allowed us to simulate vesicle hydrodynamics in a computational domain with multiple inlets and outlets. We also investigate the hydrodynamics of oblate-like shape vesicles in a parabolic flow. This work has been done in 2D configuration because of the immense computational load resulting from a large number of degrees of freedom, but we are actively seeking to expand it to 3D settings and test a broader set of parameters and geometrical configurations.
This dissertation presents three studies on the design and implementation of interactive surface environments. It puts forward approaches to engineering interactive surface prototypes using prevailing methodologies and technologies. The scholarly findings from each study have been condensed into academic manuscripts, which are conferred herewith.
The first study identifies a communication gap between engineers of interactive surface systems (i.e., originators of concepts) and future developers. To bridge the gap, it explores a UML-based framework to establish a formal syntax for modeling hardware, middleware, and software of interactive surface prototypes. The proposed framework targets models-as-end-products, towards enabling a shared view of research prototypes thereby facilitating dialogue between concept originators and future developers.
The second study positions itself to support developers with an open-source solution for exploiting 3D point clouds for interactive tabletop applications using CPU architectures. Given dense 3D point-cloud representations of tabletop environments, the study aims toward mitigating high computational effort by segmenting candidate interaction regions as a preprocessing step. The study contributes a robust open-source solution for reducing computational costs when leveraging 3D point clouds for interactive tabletop applications. The solution itself is flexible and adaptable to variable interactive surface applications.
The third study contributes an archetypal concept for integrating mobile devices as active components in augmented tabletop surfaces. With emphasis on transparent development trails, the study demonstrates the utility of the open-source tool developed in the second study. In addition to leveraging 3D point clouds for real-time interaction, the research considers recent advances in computer vision and wireless communication to realize a modern, interactive tabletop application. A robust strategy that combines spatial augmented reality, point-cloud-based depth perception, CNN-based object detection, and Bluetooth communication is put forward. In addition to seamless communication between adhoc mobile devices and interactive tabletop systems, the archetypal concept demonstrates the benefits of preprocessing point clouds by segmenting candidate interaction regions, as suggested in the second study.
Collectively, the studies presented in this dissertation contribute; 1—bridging the gap between originators of interactive surface concepts and future developers, 2— promoting the exploration of 3D point clouds for interactive surface applications using CPU-based architectures, and 3—leveraging 3D point clouds together with emerging CNN-based object detection, and Bluetooth communication technologies to advance existing surface interaction concepts.
One of the main criteria determining the thermal comfort of occupants is the air temperature. To monitor this parameter, a thermostat is traditionally mounted in the indoor environment for instance in office rooms in the workplaces, or directly on the radiator or in another location in a room. One of the drawbacks of this conventional method is the measurement at a certain location instead of the temperature distribution in the entire room including the occupant zone. As a result, the climatic conditions measured at the thermostat point may differ from those at the user's location. This not only negatively impacts the thermal comfort assessment but also leads to a waste of energy due to unnecessary heating and cooling. Moreover, for measuring the distribution of the air temperature under laboratory conditions, multiple thermal sensors should be installed in the area under investigation. This requires high effort in both installation and expense.
To overcome the shortcomings of traditional sensors, Acoustic travel-time TOMography (ATOM) offers an alternative based on measuring the transmission sound velocity signals. The basis of the ATOM technique is the first-order dependency of the sound velocity on the medium's temperature. The average sound velocity, along the propagation paths, can be determined by travel-times estimation of a defined acoustic signal between transducers. After the travel-times collection, the room is divided into several volumetric grid cells, i.e. voxels, whose sizes are defined depending on the dimension of the room and the number of sound paths. Accordingly, the spatial air temperature in each voxel can be determined using a suitable tomographic algorithm. Recent studies indicate that despite the great potential of this technique to detect room climate, few experiments have been conducted.
This thesis aims to develop the ATOM technique for indoor climatic applications while coupling the analysis methods of tomography and room acoustics. The method developed in this thesis uses high-energy early reflections in addition to the direct paths between transducers for travel time estimation. In this way, reflections can provide multiple sound paths that allow the room coverage to be maintained even when a few or even only one transmitter and receiver are used.
In the development of the ATOM measurement system, several approaches have been employed, including the development of numerical methods and simulations and conducting experimental measurements, each of which has contributed to the improvement of the system's accuracy. In order to effectively separate the early reflections and ensure adequate coverage of the room with sound paths, a numerical method was developed based on the optimization of the coordinates of the sound transducers in the test room. The validation of the optimal positioning method shows that the reconstructed temperatures were significantly improved by placing the transducers at the optimal coordinates derived from the developed numerical method. The other numerical method developed is related to the selection of the travel times of the early reflections. Accordingly, the detection of the travel times has been improved by adjusting the lengths of the multiple analysis time-windows according to the individual travel times in the reflectogram of the room impulse response. This can reduce the probability of trapping faulty travel times in the analysis time-windows.
The simulation model used in this thesis is based on the image source model (ISM) method for simulating the theoretical travel times of early reflection sound paths. The simulation model was developed to simulate the theoretical travel times up to third-order reflections.
The empirical measurements were carried out in the climate lab of the Chair of Building Physics under different boundary conditions, i.e., combinations of different room air temperatures under both steady-state and transient conditions, and different measurement setups. With the measurements under controllable conditions in the climate lab, the validity of the developed numerical methods was confirmed.
In this thesis, the performance of the ATOM measurement system was evaluated using two measurement setups. The setup for the initial investigations consists of an omnidirectional receiver and a near omnidirectional sound source, keeping the number of transducers as few as possible. This has led to accurately identify the sources of error that could occur in each part of the measuring system. The second measurement setup consists of two directional sound sources and one omnidirectional receiver. This arrangement of transducers allowed a higher number of well-detected travel times for tomography reconstruction, a better travel time estimation due to the directivity of the sound source, and better space utilization. Furthermore, this new measurement setup was tested to determine an optimal selection of the excitation signal. The results showed that for the utilized setup, a linear chirp signal with a frequency range of 200 - 4000 Hz and a signal duration of t = 1 s represents an optimal selection with respect to the reliability of the measured travel times and higher signal-to-noise ratio (SNR).
To evaluate the performance of the measuring setups, the ATOM temperatures were always compared with the temperatures of high-resolution NTC thermistors with an accuracy of ±0.2 K. The entire measurement program, including acoustic measurements, simulation, signal processing, and visualization of measurement results are performed in MATLAB software.
In addition, to reduce the uncertainty of the positioning of the transducers, the acoustic centre of the loudspeaker was determined experimentally for three types of excitation signals, namely MLS (maximum length sequence) signals with different lengths and duration, linear and logarithmic chirp signals with different defined frequency ranges. For this purpose, the climate lab was converted into a fully anechoic chamber by attaching absorption panels to the entire surfaces of the room. The measurement results indicated that the measurement of the acoustic centre of the sound source significantly reduces the displacement error of the transducer position.
Moreover, to measure the air temperature in an occupied room, an algorithm was developed that can convert distorted signals into pure reference signals using an adaptive filter. The measurement results confirm the validity of the approach for a temperature interval of 4 K inside the climate lab.
Accordingly, the accuracy of the reconstructed temperatures indicated that ATOM is very suitable for measuring the air temperature distribution in rooms.
Diese Arbeit soll einen Beitrag zum Neuen Steuerungsmodell der Öffentlichen Verwaltung auf staatlicher Ebene in Deutschland leisten. Sie dient der Untersuchung zum Aufbau eines ökonomischen Modells zur Koordination von Dienstliegenschaften auf staatlicher Ebene.
Die Untersuchung der Dienstliegenschaften zeigt, dass diese eine interne Dienstbarkeit des Staates als Wirtschaftssubjekt an den Staat als Hoheitsträger fingieren.
Die Untersuchung der Liegenschaftsverwaltung belegt, dass sie vor allem ein Controlling-Instrument für den Informationsfluss zu Entscheidungen über Dienstliegenschaften zwischen dem Hoheitsträger und dem Wirtschaftssubjekt darstellt.
Die Untersuchung der Transaktionskosten beweist, dass eine Koordination am effizientesten über die eigene Organisation mittels dezentraler Aufgabenkonzentration in Form eines SSC erreicht werden kann.
Die Untersuchung der Handlungs- und Verfügungsrechte ergab, dass die Verfügungsrechte an den Dienstliegenschaften weiter den Ressorts bzw. Nutzern obliegen. Allein das Handlungsrecht der Aufgabenwahrnehmung ist an die Liegenschaftsverwaltung übergegangen.
Die Untersuchung der Prinzipal-Agent-Verhältnisse teilt der Liegenschaftsverwaltung die Rolle eines Erfüllungsgehilfen des Wirtschaftssubjektes zu. Die monetäre Abwicklung der Ge-schäfte zwischen dem Wirtschaftssubjekt und dem Hoheitsträger obliegt als zuarbeitende Organisationseinheit ohne eigene Entscheidungsgewalt der Liegenschaftsverwaltung.
Aus diesen Thesen ergeben sich monetäre Handlungsmöglichkeiten, die in den Aufbau des Modells einfließen. Es rückt das Wirtschaftssubjekt als Entscheidungsträger über den Ressourceneinsatz in den Mittelpunkt der Betrachtung. Der Hoheitsträger ist hierbei nur der Forderungsberechtigte an das Wirtschaftssubjekt und die Liegenschaftsverwaltung dessen immobilienwirtschaftlicher Vertreter.
Diese Konstellation berücksichtigend erfolgt dem Credo des NPM gemäß die Beschreibung des Modells und des institutionellen Arrangements nach den gängigen Modellen aus der Privatwirtschaft. Anhand der Untersuchungsergebnisse wird eine Liegenschaftsverwaltung skizziert, welche einerseits den tatsächlichen betriebswirtschaftlichen Anforderungen der Immobilienwirtschaft und andererseits den Gegebenheiten des haushaltswirtschaftlichen Umfeldes der öffentlichen Verwaltung gerecht werden kann.
Das aufgebaute Realmodell dient gleichzeitig dem Vergleich mit dem bestehenden und in der Praxis angewandten Mieter-Vermieter-Modell als Idealmodell. Der Vergleich zeigt, dass sich aus der Untersuchung zivilrechtlicher Institutionen zwar kein schuldrechtliches, wohl aber ein dingliches Recht ableiten lässt. Damit einher geht die Vermutung, dass es sich bei dem Mieter-Vermieter-Modell im staatlichen Bereich um einen Fall von Modellplatonismus handelt.
Der Erfahrung auf der Spur
(2023)
Dieselbe Zeit, derselbe Raum - zwei, grundverschiedene Regisseure und damit Erfahrungswelten. Aleksandr Rastorguevs und Sergei Loznitsas Dokumentarfilme der 90er und 2000er Jahre sind politische, poetische, punktgenaue Interventionen in die Gegenwart der „kleinen Menschen“. Das Buch widmet sich dokumentarfilmischen Meisterwerken, die methodisch Verdrängtes und Übersehenes, planmäßig Vergessenes sichtbar machen – nach dem Krieg ist vor dem Krieg. Ästhetik in ihrer sozial-, geschichts- und kulturwissenschaftlichen Relevanz.
Im post- und kontrafaktischen Zeitalter des allgegenwärtigen medialen Überflusses, inmitten der Fernseh-, YouTube- und virtuellen Realität, erfüllen, begründen, ermöglichen oder schlichtweg erkämpfen die Filme und ihre Autoren verloren gegangene Räume für Widersprüche, Fragen, die mal in ihrer Ambivalenz, mal in ihrer spröden Eindeutigkeit ihren Aussagewert haben. Wider die marginale Rezeption rückt die Publikation sie in den Raum der interdisziplinären wissenschaftlichen Forschung und stellt sie als gleichwertige Formen der Wissens- und Erfahrungsproduktion vor.
Bei all ihrer Unterschiedlichkeit, katapultieren die Filme den Zuschauer in ebenjene bekannte, aber nicht erkannte, weil nicht gesehene, übersehene, nicht wahrgenommene Hyperrealität ihrer Alltagswirklichkeit. Weder der Autor noch das Werk noch der Zuschauer sind aus dem jeweiligen historischen oder soziopolitischen Diktum herauslösbar oder gar gänzlich frei.
In der Welt der Objekte zählt der Schlüssel zu den wichtigsten und ältesten Gebrauchs-gegenständen der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeingültigen Produkts der heutigen Dingwelt in den Fokus gestellt.
Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schlüssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien.
Auf der Grundlage von strukturierten Daten sollen Maßnahmen für eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verständnis für den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu können.
Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verständnis der historischen Untersuchungen, den Erkenntnissen der durchgeführten Studien und einem praxisorientierten Entstehungs-prozess künftige Ideen und Ansätze, eine fortwährende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte förderlich zu betrachten und einsetzen zu können.
Strategien der Sichtbarkeit und Sichtbarmachung von ‚Wearable Enhancement‘ im Bereich Smart Health
(2022)
Die vorliegende Forschungsarbeit befasst sich mit der Entwicklung und Gestaltung von körpernahen, tragbaren Artefakten für den digitalisierten Gesundheitsbereich. Unter dem entwickelten Begriff des Wearable Enhancements werden die verschiedenen Termini aus smarten Textilien, Fashion Technologies, Wearable Technologies sowie elektronischen Textilien zusammengefasst und zwei zentrale Forschungsfragen untersucht. Wie kann Wearable Enhancement im Bereich Smart Health ethisch, sozial und ökologisch entwickelt und gestaltet werden? Inwiefern können textile Schnittstellen die Wahrnehmung und die Wahrnehmbarkeit des Körpers verändern? Mit der ersten Forschungsfrage sollen vorrangig Ansätze und Strategien der Sichtbarkeit für die Entwicklung und Gestaltung diskutiert werden, welche Aussagen für die Designpraxis, den Gestaltungs- und Designforschungsprozess sowie die Designlösungen selbst generieren sollen. Die zweite Forschungsfrage zielt darauf, Formen der Sichtbarmachung von sowie für Wearable Enhancement zu untersuchen.
Anhand von drei konkreten Fallstudien werden wesentliche Aspekte der Rezeption, Perzeption, Konstruktion, Konfiguration und Konzeption von soziotechnischen Artefakten zur Funktionssteigerung des menschlichen Körpers untersucht und verschiedene Formen der Sichtbarkeit und Sichtbarmachung entwickelt. In der Arbeit wird ein dual-angelegter transdisziplinärer Designforschungsansatz entwickelt und praktiziert, welcher sowohl die menschlichen Bedürfnisse der Nutzer*innen als auch die Weiterentwicklung von Technologien berücksichtigt. Auf dieser Grundlage wird versucht Anregungen für ein zukunftsfähiges und zugleich verantwortungsorientiertes Design zu geben.
The Finite Element Method (FEM) is widely used in engineering for solving Partial Differential Equations (PDEs) over complex geometries. To this end, it is required to provide the FEM software with a geometric model that is typically constructed in a Computer-Aided Design (CAD) software. However, FEM and CAD use different approaches for the mathematical description of the geometry. Thus, it is required to generate a mesh, which is suitable for FEM, based on the CAD model. Nonetheless, this procedure is not a trivial task and it can be time consuming. This issue becomes more significant for solving shape and topology optimization problems, which consist in evolving the geometry iteratively. Therefore, the computational cost associated to the mesh generation process is increased exponentially for this type of applications.
The main goal of this work is to investigate the integration of CAD and CAE in shape and topology optimization. To this end, numerical tools that close the gap between design and analysis are presented. The specific objectives of this work are listed below:
• Automatize the sensitivity analysis in an isogeometric framework for applications in shape optimization. Applications for linear elasticity are considered.
• A methodology is developed for providing a direct link between the CAD model and the analysis mesh. In consequence, the sensitivity analysis can be performed in terms of the design variables located in the design model.
• The last objective is to develop an isogeometric method for shape and topological optimization. This method should take advantage of using Non-Uniform Rational B-Splines (NURBS) with higher continuity as basis functions.
Isogeometric Analysis (IGA) is a framework designed to integrate the design and analysis in engineering problems. The fundamental idea of IGA is to use the same basis functions for modeling the geometry, usually NURBS, for the approximation of the solution fields. The advantage of integrating design and analysis is two-fold. First, the analysis stage is more accurate since the system of PDEs is not solved using an approximated geometry, but the exact CAD model. Moreover, providing a direct link between the design and analysis discretizations makes possible the implementation of efficient sensitivity analysis methods. Second, the computational time is significantly reduced because the mesh generation process can be avoided.
Sensitivity analysis is essential for solving optimization problems when gradient-based optimization algorithms are employed. Automatic differentiation can compute exact gradients, automatically by tracking the algebraic operations performed on the design variables. For the automation of the sensitivity analysis, an isogeometric framework is used. Here, the analysis mesh is obtained after carrying out successive refinements, while retaining the coarse geometry for the domain design. An automatic differentiation (AD) toolbox is used to perform the sensitivity analysis. The AD toolbox takes the code for computing the objective and constraint functions as input. Then, using a source code transformation approach, it outputs a code for computing the objective and constraint functions, and their sensitivities as well. The sensitivities obtained from the sensitivity propagation method are compared with analytical sensitivities, which are computed using a full isogeometric approach.
The computational efficiency of AD is comparable to that of analytical sensitivities. However, the memory requirements are larger for AD. Therefore, AD is preferable if the memory requirements are satisfied. Automatic sensitivity analysis demonstrates its practicality since it simplifies the work of engineers and designers.
Complex geometries with sharp edges and/or holes cannot easily be described with NURBS. One solution is the use of unstructured meshes. Simplex-elements (triangles and tetrahedra for two and three dimensions respectively) are particularly useful since they can automatically parameterize a wide variety of domains. In this regard, unstructured Bézier elements, commonly used in CAD, can be employed for the exact modelling of CAD boundary representations. In two dimensions, the domain enclosed by NURBS curves is parameterized with Bézier triangles. To describe exactly the boundary of a two-dimensional CAD model, the continuity of a NURBS boundary representation is reduced to C^0. Then, the control points are used to generate a triangulation such that the boundary of the domain is identical to the initial CAD boundary representation. Thus, a direct link between the design and analysis discretizations is provided and the sensitivities can be propagated to the design domain.
In three dimensions, the initial CAD boundary representation is given as a collection of NURBS surfaces that enclose a volume. Using a mesh generator (Gmsh), a tetrahedral mesh is obtained. The original surface is reconstructed by modifying the location of the control points of the tetrahedral mesh using Bézier tetrahedral elements and a point inversion algorithm. This method offers the possibility of computing the sensitivity analysis using the analysis mesh. Then, the sensitivities can be propagated into the design discretization. To reuse the mesh originally generated, a moving Bézier tetrahedral mesh approach was implemented.
A gradient-based optimization algorithm is employed together with a sensitivity propagation procedure for the shape optimization cases. The proposed shape optimization approaches are used to solve some standard benchmark problems in structural mechanics. The results obtained show that the proposed approach can compute accurate gradients and evolve the geometry towards optimal solutions. In three dimensions, the moving mesh approach results in faster convergence in terms of computational time and avoids remeshing at each optimization step.
For considering topological changes in a CAD-based framework, an isogeometric phase-field based shape and topology optimization is developed. In this case, the diffuse interface of a phase-field variable over a design domain implicitly describes the boundaries of the geometry. The design variables are the local values of the phase-field variable. The descent direction to minimize the objective function is found by using the sensitivities of the objective function with respect to the design variables. The evolution of the phase-field is determined by solving the time dependent Allen-Cahn equation.
Especially for topology optimization problems that require C^1 continuity, such as for flexoelectric structures, the isogeometric phase field method is of great advantage. NURBS can achieve the desired continuity more efficiently than the traditional employed functions. The robustness of the method is demonstrated when applied to different geometries, boundary conditions, and material configurations. The applications illustrate that compared to piezoelectricity, the electrical performance of flexoelectric microbeams is larger under bending. In contrast, the electrical power for a structure under compression becomes larger with piezoelectricity.
Analysis of Functionally Graded Porous Materials Using Deep Energy Method and Analytical Solution
(2022)
Porous materials are an emerging branch of engineering materials that are composed of two elements: One element is a solid (matrix), and the other element is either liquid or gas. Pores can be distributed within the solid matrix of porous materials with different shapes and sizes. In addition, porous materials are lightweight, and flexible, and have higher resistance to crack propagation and specific thermal, mechanical, and magnetic properties. These properties are necessary for manufacturing engineering structures such as beams and other engineering structures. These materials are widely used in solid mechanics and are considered a good replacement for classical materials by many researchers recently. Producing lightweight materials has been developed because of the possibility of exploiting the properties of these materials. Various types of porous material are generated naturally or artificially for a specific application such as bones and foams. Like functionally graded materials, pore distribution patterns can be uniform or non-uniform. Biot’s theory is a well-developed theory to study the behavior of poroelastic materials which investigates the interaction between fluid and solid phases of a fluid-saturated porous medium.
Functionally graded porous materials (FGPM) are widely used in modern industries, such as aerospace, automotive, and biomechanics. These advanced materials have some specific properties compared to materials with a classic structure. They are extremely light, while they have specific strength in mechanical and high-temperature environments. FGPMs are characterized by a gradual variation of material parameters over the volume. Although these materials can be made naturally, it is possible to design and manufacture them for a specific application. Therefore, many studies have been done to analyze the mechanical and thermal properties of FGPM structures, especially beams.
Biot was the pioneer in formulating the linear elasticity and thermoelasticity equations of porous material. Since then, Biot's formulation has been developed in continuum mechanics which is named poroelasticity. There are obstacles to analyzing the behavior of these materials accurately like the shape of the pores, the distribution of pores in the material, and the behavior of the fluid (or gas) that saturated pores. Indeed, most of the engineering structures made of FGPM have nonlinear governing equations. Therefore, it is difficult to study engineering structures by solving these complicated equations.
The main purpose of this dissertation is to analyze porous materials in engineering structures. For this purpose, the complex equations of porous materials have been simplified and applied to engineering problems so that the effect of all parameters of porous materials on the behavior of engineering structure has been investigated.
The effect of important parameters of porous materials on beam behavior including pores compressibility, porosity distribution, thermal expansion of fluid within pores, the interaction of stresses between pores and material matrix due to temperature increase, effects of pore size, material thickness, and saturated pores with fluid and unsaturated conditions are investigated.
Two methods, the deep energy method, and the exact solution have been used to reduce the problem hypotheses, increase accuracy, increase processing speed, and apply these in engineering structures. In both methods, they are analyzed nonlinear and complex equations of porous materials.
To increase the accuracy of analysis and study of the effect of shear forces, Timoshenko and Reddy's beam theories have been used. Also, neural networks such as residual and fully connected networks are designed to have high accuracy and less processing time than other computational methods.
The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it.
The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime – in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion.
These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history.
Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivitäten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erklären, warum sich die Öffnung von Innovationsprozessen in KMU unterscheidet. Dafür wurde auf eine multiple Fallstudienanalyse zurückgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesländern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Berücksichtigung von formenden Innovationsaktivitäten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gründen für und gegen Open Innovation vermitteln ein über den bisherigen Forschungsstand hinausgehendes Verständnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erklärt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen für die Unternehmenspraxis.
Reine Calciumsulfatbindemittel weisen eine hohe Löslichkeit auf. Feuchteinwirkung führt zudem zu starken Festigkeitsverlusten. Aus diesem Grund werden diese Bindemittel ausschließlich für Baustoffe und -produkte im Innenbereich ohne permanenten Feuchtebeanspruchung eingesetzt. Eine Möglichkeit, die Feuchtebeständigkeit zu erhöhen, ist die Beimischung puzzolanischer und zementärer Komponenten. Diese Mischsysteme werden Gips-Zement-Puzzolan-Bindemittel (kurz: GZPB) genannt.
Mischungen aus Calciumsulfaten und Portlandzementen allein sind aufgrund der treibenden Ettringitbildung nicht raumbeständig. Durch die Zugabe von puzzolanischen Stoffen können aber Bedingungen im hydratisierenden System geschaffen werden, welche eine rissfreie Erhärtung ermöglichen. Hierfür ist eine exakte Rezeptierung der GZPB notwendig, um die GZPB-typischen, ettringitbedingten Dehnungen zeitlich zu begrenzen. Insbesondere bei alumosilikatischen Puzzolanen treten während der Hydratation gegenüber rein silikatischen Puzzolanen deutlich höhere Expansionen auf, wodurch die Gefahr einer potenziellen Rissbildung steigt. Für die Erstellung geeigneter GZPB-Zusammensetzungen bedarf es daher einer Methodik, um raumbeständig erhärtende Systeme sicher von destruktiven Mischungen unterscheiden zu können.
Sowohl für die Rezeptierung als auch für die Anwendung der GZPB existieren in Deutschland keinerlei Normen. Darüber hinaus sind die Hydratationsvorgänge sowie die entstehenden Produkte nicht konsistent beschrieben. Auch auf die Besonderheiten der GZPB mit alumosilikatischen Puzzolanen wird in der Literatur nur unzureichend eingegangen.
Ziel war es daher, ein grundlegendes Verständnis der Hydratation sowie eine sichere Methodik zur Rezeptierung raumbeständig und rissfrei erhärtender GZPB, insbesondere in Hinblick auf die Verwendung alumosilikatischer Puzzolane, zu erarbeiten. Darüber hinaus sollte systematisch der Einfluss der Einzelkomponenten auf Hydratation und Eigenschaften dieser Bindemittelsysteme untersucht werden. Dies soll ermöglichen, die GZPB für ein breites Anwendungsspektrum als Bindemittel zu etablieren, und somit vorteilhafte Eigenschaften der Calciumsulfate (geringe Schwindneigung, geringe CO2-Emission etc.) mit der Leistungs-fähigkeit von Zementen (Wasserbeständigkeit, Festigkeit, Dauerhaftigkeit etc.) zu verbinden.
Als Ausgangsstoffe der Untersuchungen zu den GZPB wurden Stuckgips und Alpha-Halbhydrat als Calciumsulfatbindemittel in unterschiedlichen Anteilen im GZPB verwendet. Die Puzzolan-Zement-Verhältnisse wurden ebenfalls variiert. Als Puzzolan kam für den Großteil der Untersuchungen ein alumosilikatisches Metakaolin zum Einsatz. Als kalkspendende Komponente diente ein reiner Portlandzement.
Das Untersuchungsprogramm gliederte sich in 4 Teile. Zuerst wurde anhand von CaO- und pH-Wert-Messungen in Suspensionen sowie dem Längenänderungsverhalten von Bindemittelleimen verschiedener Zusammensetzungen eine Vorauswahl geeigneter GZPB-Rezepturen ermittelt. Danach erfolgten, ebenfalls an Bindemittelleimen, Untersuchungen zu den Eigenschaften der als geeignet eingeschätzten GZPB-Mischungen. Hierzu zählten Langzeitbetrachtungen zur rissfreien Erhärtung bei unterschiedlichen Umgebungsbedingungen sowie die Festigkeitsentwicklung im trockenen und feuchten Zustand. Im nächsten Schritt wurde anhand zweier exemplarischer GZPB-Zusammensetzungen (mit silikatischen und alumosilikatischen Puzzolan) die prinzipiell mögliche Phasenzusammensetzung unter Variation des Puzzolan-Zement-Verhältnisses (P/Z-Verhältnis) und des Calciumsulfatanteils im thermodynamischen Gleichgewichtszustand berechnet. Hier wurde im Besonderen auf Unterschiede der silikatischen und alumosilikatischen Puzzolane eingegangen. Im letzten Teil der Untersuchungen wurden die Hydratationskinetik der GZPB sowie die Gefügeentwicklung näher betrachtet. Hierfür wurden die Porenlösungen chemisch analysiert und Sättigungsindizes berechnet, sowie elektronenmikropische, porosimetrische und röntgenografische Untersuchungen durchgeführt. Abschließend wurden die Ergebnisse gesamtheitlich interpretiert, da die Ergebnisse der einzelnen Untersuchungsprogramme miteinander in Wechselwirkung stehen.
Als hauptsächliche Hydratationsprodukte wurden Calciumsulfat-Dihydrat, Ettringit und
C-(A)-S-H-Phasen ermittelt, deren Anteile im GZPB neben dem Calciumsulfatanteil und dem Puzzolan-Zement-Verhältnis auch deutlich vom Wasserangebot und der Gefügeentwicklung abhängen. Bei Verwendung von alumosilikatischen Puzzolans kommt es wahrscheinlich zur teilweisen Substitution des Siliciums durch Aluminium in den C-S-H-Phasen. Dies erscheint aufgrund des Nachweises der für diese Phasen typischen, folienartigen Morphologie wahrscheinlich. Portlandit wurde in raumbeständigen GZPB-Systemen nur zu sehr frühen Zeitpunkten in geringen Mengen gefunden.
In den Untersuchungen konnte ein Teil der in der Literatur beschriebenen, prinzipiellen Hydratationsabläufe bestätigt werden. Bei Verwendung von Halbhydrat als Calciumsulfatkomponente entsteht zuerst Dihydrat und bildet die Primärstruktur der GZPB. In dieses existierende Grundgefüge kristallisieren dann das Ettringit und die C-(A)-S-H-Phasen. In den GZPB sorgen entgegen der Beschreibungen in der Literatur nicht ausschließlich die
C-(A)-S-H-Phasen zur Verbesserung der Feuchtebeständigkeit und der Erhöhung des Festigkeitsniveaus, sondern auch das Ettringit. Beide Phasen überwachsen im zeitlichen Verlauf der Hydratation die Dihydratkristalle in der Matrix und hüllen diese – je nach Calciumsulfatanteil im GZPB – teilweise oder vollständig ein. Diese Umhüllung sowie die starke Gefügeverdichtung durch die C-(A)-S-H-Phasen und das Ettringit bedingen, dass ein lösender Angriff durch Wasser erschwert oder gar verhindert wird. Gleichzeitig wird die Gleitfähigkeit an den Kontaktstellen der Dihydratkristalle verringert.
Eine rissfreie und raumbeständige Erhärtung ist für die gefahrlose Anwendung eines GZPB-Systems essentiell. Hierfür ist die Kinetik der Ettringitbildung von elementarer Bedeutung. Die gebildete Ettringitmenge spielt nur eine untergeordnete Rolle. Selbst ausgeprägte, ettringitbedingte Dehnungen und hohe sich bildende Mengen führen zu frühen Zeitpunkten, wenn die Dihydratkristalle noch leicht gegeneinander verschiebbar sind, zu keinen Schäden. Bleibt die Übersättigung bezüglich Ettringit und somit auch der Kristallisationsdruck allerdings über einen langen Zeitraum hoch, genügen bereits geringe Ettringitmengen, um das sich stetig verfestigende Gefüge stark zu schädigen.
Die für die raumbeständige Erhärtung der GZPB notwendige, schnelle Abnahme der Ettringitübersättigung wird hauptsächlich durch die Reaktivität des Puzzolans beeinflusst. Die puzzolanische Reaktion führt zur Bindung des aus dem Zement stammenden Calciumhydroxid durch die Bildung von C-(A)-S-H-Phasen und Ettringit. Hierdurch sinkt die Calcium- und Hydroxidionenkonzentration in der Porenlösung im Verlauf der Hydratation, wodurch auch die Übersättigung bezüglich Ettringit abnimmt. Je höher die Reaktivität des Puzzolans ist, desto schneller sinkt der Sättigungsindex des Ettringits und somit auch der Kristallisationsdruck. Nach Unterschreiten eines noch näher zu klärendem Grenzwert der Übersättigung stagnieren die Dehnungen. Das Ettringit kristallisiert bzw. wächst nun bevorzugt in den Poren ohne eine weitere, äußere Volumenzunahme zu verursachen.
Um eine schadensfreie Erhärtung des GZPB zu gewährleisten, muss gerade in der frühen Phase der Hydratation ein ausreichendes Wasserangebot gewährleistet werden, so dass die Ettringitbildung möglichst vollständig ablaufen kann. Andernfalls kann es bei einer Wiederbefeuchtung zur Reaktivierung der Ettringitbildung kommen, was im eingebauten Zustand Schäden verursachen kann. Die Gewährleistung eines ausreichenden Wasserangebots ist im GZPB-System nicht unproblematisch. In Abhängigkeit der GZPB-Zusammensetzung können sich große Ettringitmengen bilden, die einen sehr hohen Wasserbedarf aufweisen. Deshalb kann es, je nach verwendeten Wasser-Bindemittel-Wert, im Bindemittelleim zu einem Wassermangel kommen, welcher die weitere Hydratation verlangsamt bzw. komplett verhindert. Zudem können GZPB-Systeme teils sehr dichte Gefüge ausbilden, wodurch der Wassertransport zum Reaktionsort des Ettringits zusätzlich behindert wird.
Die Konzeption raumbeständiger GZPB-Systeme muss anhand mehrerer aufeinander aufbauender Untersuchungen erfolgen. Zur Vorauswahl geeigneter Puzzolan-Zementverhältnisse eignen sich die Messungen der CaO-Konzentration und des pH-Wertes in Suspensionen. Als alleinige Beurteilungsgrundlage reicht dies allerdings nicht aus. Zusätzlich muss das Längenänderungs-verhalten beurteilt werden. Raumbeständige Mischungen mit alumosilikatischen Puzzolanen zeigen zu frühen Zeitpunkten starke Dehnungen, welche dann abrupt stagnieren. Stetige – auch geringe – Dehnungen weisen auf eine destruktive Zusammensetzung hin.
Mit diesem mehrstufigen Vorgehen können raumbeständige, stabile GZPB-Systeme konzipiert werden, so dass die Zielstellung der Arbeit erreicht wurde und ein sicherer praktischer Einsatz dieser Bindemittelart gewährleistet werden kann.
Numerical simulation of physical phenomena, like electro-magnetics, structural and fluid mechanics is essential for the cost- and time-efficient development of mechanical products at high quality. It allows to investigate the behavior of a product or a system far before the first prototype of a product is manufactured.
This thesis addresses the simulation of contact mechanics. Mechanical contacts appear in nearly every product of mechanical engineering. Gearboxes, roller bearings, valves and pumps are only some examples. Simulating these systems not only for the maximal/minimal stresses and strains but for the stress-distribution in case of tribo-contacts is a challenging task from a numerical point of view.
Classical procedures like the Finite Element Method suffer from the nonsmooth representation of contact surfaces with discrete Lagrange elements. On the one hand, an error due to the approximate description of the surface is introduced. On the other hand it is difficult to attain a robust contact search because surface normals can not be described in a unique form at element edges.
This thesis introduces therefore a novel approach, the adaptive isogeometric contact formulation based on polynomial Splines over hierarchical T-meshes (PHT-Splines), for the approximate solution of the non-linear contact problem. It provides a more accurate, robust and efficient solution compared to conventional methods. During the development of this method the focus was laid on the solution of static contact problems without friction in 2D and 3D in which the structures undergo small deformations.
The mathematical description of the problem entails a system of partial differential equations and boundary conditions which model the linear elastic behaviour of continua. Additionally, it comprises side conditions, the Karush-Kuhn-Tuckerconditions, to prevent the contacting structures from non-physical penetration. The mathematical model must be transformed into its integral form for approximation of the solution. Employing a penalty method, contact constraints are incorporated by adding the resulting equations in weak form to the overall set of equations. For an efficient space discretization of the bulk and especially the contact boundary of the structures, the principle of Isogeometric Analysis (IGA) is applied. Isogeometric Finite Element Methods provide several advantages over conventional Finite Element discretization. Surface approximation with Non-Uniform Rational B-Splines (NURBS) allow a robust numerical solution of the contact problem with high accuracy in terms of an exact geometry description including the surface smoothness.
The numerical evaluation of the contact integral is challenging due to generally non-conforming meshes of the contacting structures. In this work the highly accurate Mortar Method is applied in the isogeometric setting for the evaluation of contact contributions. This leads to an algebraic system of equations that is linearized and solved in sequential steps. This procedure is known as the Newton Raphson Method. Based on numerical examples, the advantages of the isogeometric approach
with classical refinement strategies, like the p- and h-refinement, are shown and the influence of relevant algorithmic parameters on the approximate solution of the contact problem is verified. One drawback of the Spline approximations of stresses though is that they lack accuracy at the contact edge where the structures change their boundary from contact to no contact and where the solution features a kink. The approximation with smooth Spline functions yields numerical artefacts in the form of non-physical oscillations.
This property of the numerical solution is not only a drawback for the
simulation of e.g. tribological contacts, it also influences the convergence properties of iterative solution procedures negatively. Hence, the NURBS discretized geometries are transformed to Polynomial Splines over Hierarchical T-meshes (PHT-Splines), for the local refinement along contact edges to reduce the artefact of pressure oscillations. NURBS have a tensor product structure which does not allow to refine only certain parts of the geometrical domain while leaving other parts unchanged. Due to the Bézier Extraction, lying behind the transformation from NURBS to PHT-Splines, the connected mesh structure is broken up into separate elements. This allows an efficient local refinement along the contact edge.
Before single elements are refined in a hierarchical form with cross-insertion, existing basis functions must be modified or eliminated. This process of truncation assures local and global linear independence of the refined basis which is needed for a unique approximate solution. The contact boundary is a priori unknown. Local refinement along the contact edge, especially for 3D problems, is for this reason not straight forward. In this work the use of an a posteriori error estimation procedure, the Super Convergent Recovery Solution Based Error Estimation Scheme, together with the Dörfler Marking Method is suggested for the spatial search of the contact edge.
Numerical examples show that the developed method improves the quality of solutions along the contact edge significantly compared to NURBS based approximate solutions. Also, the error in maximum contact pressures, which correlates with the pressure artefacts, is minimized by the adaptive local refinement.
In a final step the practicability of the developed solution algorithm is verified by an industrial application: The highly loaded mechanical contact between roller and cam in the drive train of a high-pressure fuel pump is considered.
In this thesis, a new approach is developed for applications of shape optimization on the time harmonic wave propagation (Helmholtz equation) for acoustic problems. This approach is introduced for different dimensional problems: 2D, 3D axi-symmetric and fully 3D problems. The boundary element method (BEM) is coupled with the isogeometric analysis (IGA) forming the so-called (IGABEM) which speeds up meshing and gives higher accuracy in comparison with standard BEM. BEM is superior for handling unbounded domains by modeling only the inner boundaries and avoiding the truncation error, present in the finite element method (FEM) since BEM solutions satisfy the Sommerfeld radiation condition automatically. Moreover, BEM reduces the space dimension by one from a volumetric three-dimensional problem to a surface two-dimensional problem, or from a surface two-dimensional problem to a perimeter one-dimensional problem. Non-uniform rational B-splines basis functions (NURBS) are used in an isogeometric setting to describe both the CAD geometries and the physical fields.
IGABEM is coupled with one of the gradient-free optimization methods, the Particle Swarm Optimization (PSO) for structural shape optimization problems. PSO is a straightforward method since it does not require any sensitivity analysis but it has some trade-offs with regard to the computational cost. Coupling IGA with optimization problems enables the NURBS basis functions to represent the three models: shape design, analysis and optimization models, by a definition of a set of control points to be the control variables and the optimization parameters as well which enables an easy transition between the three models.
Acoustic shape optimization for various frequencies in different mediums is performed with PSO and the results are compared with the benchmark solutions from the literature for different dimensional problems proving the efficiency of the proposed approach with the following remarks:
- In 2D problems, two BEM methods are used: the conventional isogeometric boundary element method (IGABEM) and the eXtended IGABEM (XIBEM) enriched with the partition-of-unity expansion using a set of plane waves, where the results are generally in good agreement with the linterature with some computation advantage to XIBEM which allows coarser meshes.
-In 3D axi-symmetric problems, the three-dimensional problem is simplified in BEM from a surface integral to a combination of two 1D integrals. The first is the line integral similar to a two-dimensional BEM problem. The second integral is performed over the angle of revolution. The discretization is applied only to the former integration. This leads to significant computational savings and, consequently, better treatment for higher frequencies over the full three-dimensional models.
- In fully 3D problems, a detailed comparison between two BEM methods: the conventional boundary integral equation (CBIE) and Burton-Miller (BM) is provided including the computational cost. The proposed models are enhanced with a modified collocation scheme with offsets to Greville abscissae to avoid placing collocation points at the corners. Placing collocation points on smooth surface enables accurate evaluation of normals for BM formulation in addition to straightforward prediction of jump-terms and avoids singularities in $\mathcal{O} (1/r)$ integrals eliminating the need for polar integration. Furthermore, no additional special treatment is required for the hyper-singular integral while collocating on highly distorted elements, such as those containing sphere poles. The obtained results indicate that, CBIE with PSO is a feasible alternative (except for a small number of fictitious frequencies) which is easier to implement. Furthermore, BM presents an outstanding treatment of the complicated geometry of mufflers with internal extended inlet/outlet tube as an interior 3D Helmholtz acoustic problem instead of using mixed or dual BEM.
Revisiting vernacular technique: Engineering a low environmental impact earth stabilisation method
(2022)
The major drawbacks of earth as a construction material — such as its low water stability and moderate strength — have led mankind to stabilize earth. Different civilizations developed vernacular techniques mainly focussing on lime, pozzolan or gypsum stabilization. Recently, cement has become the most commonly used additive in earth stabilization as it improves the strength and durability of plain earth. Also, it is a familiar and globally available construction material. However, using cement as an additive reduces the environmental advantages of earth and run counter to global targets regarding the reduction of CO2 emissions. Alternatives to cement stabilization are currently neither efficient enough to reduce its environmental impact nor allow the possibility of obtaining better results than those of cement. As such, this thesis deals with the rediscovery of a reverse engineering approach for a low environmental impact earth stabilization technique, aiming to replace cement in earth stabilization.
The first step in the method consists in a comprehensive review of earth stabilization with regards to earthen building standards and soil classification, which allows us to identify the research gap. The review showed that there is great potential in using other additives which result in similar improvements as those achieved by cement. However, the studies that have been conducted so far either use expansive soils, which are not suitable for earth constructions or artificial pozzolans that indirectly contribute to CO2 emissions. This is the main research gap.
The key concept for the development in the second step of the method is to combine vernacular additives to both improve the strength and durability of plain earth and to reduce the CO2 emissions. Various earth-mixtures were prepared and both development and performance tests were done to investigate the performance of this technique. The laboratory analyses on mix-design have proven a high durability and the results show a remarkable increase in strength performance. Furthermore, a significant reduction in CO2 emissions in comparison to cement stabilization could be shown.
The third step of the method discusses the results drawn from the experimental programme. In addition, the potential of the new earth mixture with regards to its usability in the field of building construction and architectural design is further elaborated on.
The method used in this study is the first of its kind that allows investors to avoid the very time-consuming processes such as finding a suitable source for soil excavation and soil classification. The developed mixture has significant workability and suitability for production of stabilized earthen panels — the very first of its kind. Such a panel is practically feasible, reasonable, and could be integrated into earthen building standards in general and in particular to DIN 18948, which is related to earthen boards and published in 2018.
The modern industries of the 19th and 20th centuries had multiple effects on the spatial transformation of cities and regions. The past decade has witnessed increasing scholarly and governmental attempts toward conserving modern industrial heritage in the so-called Global North, with the goal, among others, of leveraging this heritage as a driver for urban economic development. In Egypt, the process continues to lag behind; on the one hand, this is due to the perplexing official recognition of the (in)tangible witnesses of modern industries. On the other hand, the official recognition and previous publications focus predominantly on weighing the significance of industrial structures based on their monumental architectural aesthetics. Their historical urban role and spatial attributes as part of urban heritage have yet to be seriously acknowledged. Accordingly, this hinders the integration of the extant industrial sites into the broader debate surrounding urban conservation, leaving them vulnerable to decay and destruction.
This dissertation steers away from the singular investigation of selective modern industrial sites to recall their historical spatial development on a city scale. This is effected by investigating a case study - the Egyptian port city of Alexandria. With the limited secondary data available on modern industries in Alexandria, this dissertation relied predominantly on primary sources. The author collected and leveraged both quantitative and qualitative data to recontextualize modern industries in terms of their spatial dynamics, order, and rationale within cities’ transformation.
By recalling historical spatial development in Alexandria, the contribution of this dissertation lies in highlighting what the author refers to as the Omitted Heritage. This is defined by the modern industries in Egypt that are intentionally, unintentionally, and forgetfully excluded in terms of physical documentation, evaluation, appreciation, and integration within urban development plans. The method used excavated the richness of the established modern industries in Alexandria in terms of their quantity and diversity, which would have otherwise remained largely forgotten. The contextualization of modern industries unveiled spatial periodization, spatial dynamics, and conceptual development. The study draws on important analytical aspects that transcend the sites’ boundaries, elevating their significance to the municipal, regional, national, and even global levels. Its recommendations for further research are also divided into those levels.
Material failure can be tackled by so-called nonlocal models, which introduce an intrinsic length scale into the formulation and, in the case of material failure, restore the well-posedness of the underlying boundary value problem or initial boundary value problem. Among nonlocal models, peridynamics (PD) has attracted a lot of attention as it allows the natural transition from continuum to discontinue and thus allows modeling of discrete cracks without the need to describe and track the crack topology, which has been a major obstacle in traditional discrete crack approaches. This is achieved by replacing the divergence of the Cauchy stress tensor through an integral over so-called bond forces, which account for the interaction of particles. A quasi-continuum approach is then used to calibrate the material parameters of the bond forces, i.e., equating the PD energy with the energy of a continuum. One major issue for the application of PD to general complex problems is that they are limited to fairly simple material behavior and pure mechanical problems based on explicit time integration. PD has been extended to other applications but losing simultaneously its simplicity and ease in modeling material failure. Furthermore, conventional PD suffers from instability and hourglass modes that require stabilization. It also requires the use of constant horizon sizes, which drastically reduces its computational efficiency. The latter issue was resolved by the so-called dual-horizon peridynamics (DH-PD) formulation and the introduction of the duality of horizons.
Within the nonlocal operator method (NOM), the concept of nonlocality is further extended and can be considered a generalization of DH-PD. Combined with the energy functionals of various physical models, the nonlocal forms based on the dual-support concept can be derived. In addition, the variation of the energy functional allows implicit formulations of the nonlocal theory. While traditional integral equations are formulated in an integral domain, the dual-support approaches are based on dual integral domains. One prominent feature of NOM is its compatibility with variational and weighted residual methods. The NOM yields a direct numerical implementation based on the weighted residual method for many physical problems without the need for shape functions. Only the definition of the energy or boundary value problem is needed to drastically facilitate the implementation. The nonlocal operator plays an equivalent role to the derivatives of the shape functions in meshless methods and finite element methods (FEM). Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease by a series of matrix multiplications. In addition, NOM can be used to derive many nonlocal models in strong form.
The principal contributions of this dissertation are the implementation and application of NOM, and also the development of approaches for dealing with fractures within the NOM, mostly for dynamic fractures. The primary coverage and results of the dissertation are as follows:
-The first/higher-order implicit NOM and explicit NOM, including a detailed description of the implementation, are presented. The NOM is based on so-called support, dual-support, nonlocal operators, and an operate energy functional ensuring stability. The nonlocal operator is a generalization of the conventional differential operators. Combining with the method of weighted residuals and variational principles, NOM establishes the residual and tangent stiffness matrix of operate energy functional through some simple matrix without the need of shape functions as in other classical computational methods such as FEM. NOM only requires the definition of the energy drastically simplifying its implementation. For the sake of conciseness, the implementation in this chapter is focused on linear elastic solids only, though the NOM can handle more complex nonlinear problems. An explicit nonlocal operator method for the dynamic analysis of elasticity solid problems is also presented. The explicit NOM avoids the calculation of the tangent stiffness matrix as in the implicit NOM model. The explicit scheme comprises the Verlet-velocity algorithm. The NOM can be very flexible and efficient for solving partial differential equations (PDEs). It's also quite easy for readers to use the NOM and extend it to solve other complicated physical phenomena described by one or a set of PDEs. Several numerical examples are presented to show the capabilities of this method.
-A nonlocal operator method for the dynamic analysis of (thin) Kirchhoff plates is proposed. The nonlocal Hessian operator is derived from a second-order Taylor series expansion. NOM is higher-order continuous, which is exploited for thin plate analysis that requires $C^1$ continuity. The nonlocal dynamic governing formulation and operator energy functional for Kirchhoff plates are derived from a variational principle. The Verlet-velocity algorithm is used for time discretization. After confirming the accuracy of the nonlocal Hessian operator, several numerical examples are simulated by the nonlocal dynamic Kirchhoff plate formulation.
-A nonlocal fracture modeling is developed and applied to the simulation of quasi-static and dynamic fractures using the NOM. The phase field's nonlocal weak and associated strong forms are derived from a variational principle. The NOM requires only the definition of energy. We present both a nonlocal implicit phase field model and a nonlocal explicit phase field model for fracture; the first approach is better suited for quasi-static fracture problems, while the key application of the latter one is dynamic fracture. To demonstrate the performance of the underlying approach, several benchmark examples for quasi-static and dynamic fracture are solved.
Compactly, this thesis encompasses two major parts to examine mechanical responses of polymer compounds and two dimensional materials:
1- Molecular dynamics approach is investigated to study transverse impact behavior of polymers, polymer compounds and two dimensional materials.
2- Large deflection of circular and rectangular membranes is examined by employing continuum mechanics approach.
Two dimensional materials (2D), including, Graphene and molybdenum disulfide (MoS2), exhibited new and promising physical and chemical properties, opening new opportunities to be utilized alone or to enhance the performance of conventional materials. These 2D materials have attracted tremendous attention owing to their outstanding physical properties, especially concerning transverse impact loading.
Polymers, with the backbone of carbon (organic polymers) or do not include carbon atoms in the backbone (inorganic polymers) like polydimethylsiloxane (PDMS), have extraordinary characteristics particularly their flexibility leads to various easy ways of forming and casting. These simple shape processing label polymers as an excellent material often used as a matrix in composites (polymer compounds).
In this PhD work, Classical Molecular Dynamics (MD) is implemented to calculate transverse impact loading of 2D materials as well as polymer compounds reinforced with graphene sheets. In particular, MD was adopted to investigate perforation of the target and impact resistance force . By employing MD approach, the minimum velocity of the projectile that could create perforation and passes through the target is obtained. The largest investigation was focused on how graphene could enhance the impact properties of the compound. Also the purpose of this work was to discover the effect of the atomic arrangement of 2D materials on the impact problem. To this aim, the impact properties of two different 2D materials, graphene and MoS2, are studied. The simulation of chemical functionalization was carried out systematically, either with covalently bonded molecules or with non-bonded ones, focusing the following efforts on the covalently bounded species, revealed as the most efficient linkers.
To study transverse impact behavior by using classical MD approach , Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) software, that is well-known among most researchers, is employed. The simulation is done through predefined commands in LAMMPS. Generally these commands (atom style, pair style, angle style, dihedral style, improper style, kspace style, read data, fix, run, compute and so on) are used to simulate and run the model for the desired outputs. Depends on the particles and model types, suitable inter-atomic potentials (force fields) are considered. The ensembles, constraints and boundary conditions are applied depends upon the problem definition. To do so, atomic creation is needed. Python codes are developed to generate particles which explain atomic arrangement of each model. Each atomic arrangement introduced separately to LAMMPS for simulation. After applying constraints and boundary conditions, LAMMPS also include integrators like velocity-Verlet integrator or Brownian dynamics or other types of integrator to run the simulation and finally the outputs are emerged. The outputs are inspected carefully to appreciate the natural behavior of the problem. Appreciation of natural properties of the materials assist us to design new applicable materials.
In investigation on the large deflection of circular and rectangular membranes, which is related to the second part of this thesis, continuum mechanics approach is implemented. Nonlinear Föppl membrane theory, which carefully release nonlinear governing equations of motion, is considered to establish the non-linear partial differential equilibrium equations of the membranes under distributed and centric point loads. The Galerkin and energy methods are utilized to solve non-linear partial differential equilibrium equations of circular and rectangular plates respectively. Maximum deflection as well as stress through the film region, which are kinds of issue in many industrial applications, are obtained.
The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridy- namic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dy- namic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena.
This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature.
New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification
will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three dis- tinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions.
Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations.
The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis.
The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods.
The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation.
Tropical coral reefs, one of the world’s oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling.
The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts.
Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem.
For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation – two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012–today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time.
In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs – demonstrating the feasibility of digitally designing such ‘living architecture’ according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation – not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them.
Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design.
The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept.
To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory.
The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown.
The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste.
Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally.
As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content.
This study deals with design for AI/ML systems, more precisely in the industrial AI context based on case studies from the factory automation field. It therefore touches on core concepts from Human-Centered-Design (HCD), User Experience (UX) and Human Computer Interaction (HCI) on one hand, as well as concepts from Artificial Intelligence (AI), Machine Learning (ML) and the impact of technology on the other. The case studies the research is based on are within the industrial AI domain. However, the final outcomes, the findings, solutions, artifacts and so forth, should be transferable to a wider spectrum of domains. The study’s aim is to examine the role of designers in the age of AI and the factors which are relevant, based on the hypothesis that current AI/ML development lacks the human perspective, which means that there are pitfalls and challenges that design can help resolve. The initial literature review revealed that AI/ML are perceived as a new design material that calls for a new design paradigm. Additional research based on qualitative case study research was conducted to gain an overview of the relevant issues and challenges. From this, 17 themes emerged, which together with explorative expert interviews and a structured literature review, were further analyzed to produce the relevant HCD, UX and HCI themes. It became clear that designers need new processes, methods, and tools in the age of AI/ML in combination with not only design, but also data science and business expertise, which is why the proposed solution in this PhD features process modules for design, data science and business collaboration. There are seven process modules and their related activities and dependencies that serve as guidelines for practitioners who want to design intelligence. A unified framework for collecting use case exemplars was created, based on a workshop with different practitioners and researchers from the area of AI/ML to support and enrich the process modules with concrete projects examples.
The growing complexity of modern engineering problems necessitates development of advanced numerical methods. In particular, methods working directly with discrete structures, and thus, representing exactly some important properties of the solution on a lattice and not just approximating the continuous properties, become more and more popular nowadays. Among others, discrete potential theory and discrete function theory provide a variety of methods, which are discrete counterparts of the classical continuous methods for solving boundary value problems. A lot of results related to the discrete potential and function theories have been presented in recent years. However, these results are related to the discrete theories constructed on square lattices, and, thus, limiting their practical applicability and
potentially leading to higher computational costs while discretising realistic domains.
This thesis presents an extension of the discrete potential theory and discrete function theory to rectangular lattices. As usual in the discrete theories, construction of discrete operators is strongly influenced by a definition of discrete geometric setting. For providing consistent constructions throughout the whole thesis, a detailed discussion on the discrete geometric setting is presented in the beginning. After that, the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, which is the core of the discrete potential theory, its numerical analysis, and practical calculations are presented. By using the discrete fundamental solution of the discrete Laplace operator on a rectangular lattice, the discrete potential theory is then constructed for interior and exterior settings. Several discrete interior and exterior boundary value problems are then solved. Moreover, discrete transmission problems are introduced and several numerical examples of these problems are discussed. Finally, a discrete fundamental solution of the discrete Cauchy-Riemann operator on a rectangular lattice is constructed, and basics of the discrete function theory on a rectangular lattice are provided. This work indicates that the discrete theories provide
solution methods with very good numerical properties to tackle various boundary value problems, as well as transmission problems coupling interior and exterior problems. The results presented in this thesis provide a basis for further development of discrete theories on irregular lattices.
Im Rahmen dieser Arbeit wird das Charakterisieren struktureller Veränderungen zementgebundener Baustoffe durch zwei auf dem Ultraschall-Transmissionsverfahren beruhenden Methoden der zerstörungsfreien Prüfung (ZfP) mit mechanischen Wellen vorgenommen.
Zur kontinuierlichen Charakterisierung der Erstarrung und Erhärtung frischer zementgebundener Systeme wird ein auf Ultraschallsensoren für Longitudinal- und Scherwellen basierendes Messsystem in Kombination mit zugehörigen Verfahrensweisen zur Datenauswertung konzipiert, charakterisiert und angewandt. Gegenüber der bislang üblichen alleinigen Bewertung der Verfestigung anhand indirekter Ultraschallparameter wie Ausbreitungsgeschwindigkeit, Signalenergie oder Frequenzgehalt der Longitudinalwelle lässt sich damit eine direkte, sensible Erfassung der sich während der Strukturbildung entwickelnden dynamischen elastischen Eigenschaften auf der Basis primärer physikalischer Werkstoffparameter erreichen. Insbesondere Scherwellen und der dynamische Schubmodul sind geeignet, den graduellen Übergang zum Festkörper mit Überschreiten der Perkolationsschwelle sensibel und unabhängig vom Luftgehalt zu erfassen. Die zeitliche Entwicklung der dynamischen elastischen Eigenschaften, die Strukturbildungsraten sowie die daraus extrahierten diskreten Ergebnisparameter ermöglichen eine vergleichende quantitative Charakterisierung der Strukturbildung zementgebundener Baustoffe aus mechanischer Sicht. Dabei lassen sich typische, oft unvermeidbare Unterschiede in der Zusammensetzung der Versuchsmischungen berücksichtigen.
Der Einsatz laserbasierter Methoden zur Anregung und Erfassung von mechanischen Wellen und deren Kombination zu Laser-Ultraschall zielt darauf ab, die mit der Anwendung des konventionellen Ultraschall-Transmissionsverfahrens verbundenen Nachteile zu eliminieren. Diese resultieren aus der Sensorgeometrie, der mechanischen Ankopplung und bei einer Vielzahl von Oberflächenpunkten aus einem hohen prüftechnischen Aufwand. Die laserbasierte, interferometrische Erfassung mechanischer Wellen ist gegenüber Ultraschallsensoren rauschbehaftet und vergleichsweise unsensibel. Als wesentliche Voraussetzung der scannenden Anwendung von Laser-Ultraschall auf zementgebundene Baustoffe erfolgen systematische experimentelle Untersuchungen zur laserinduzierten ablativen Anregung. Diese sollen zum Verständnis des Anregungsmechanismus unmittelbar auf den Oberflächen von zementgebundenen Baustoffen, Gesteinskörnungen und metallischen Werkstoffen beitragen, relevante Einflussfaktoren aus den charakteristischen Materialeigenschaften identifizieren, geeignete Prozessparameter gewinnen und die Verfahrensgrenzen aufzeigen. Unter Einsatz von Longitudinalwellen erfolgt die Anwendung von Laser-Ultraschall zur zeit- und ortsaufgelösten Charakterisierung der Strukturbildung und Homogenität frischer sowie erhärteter Proben zementgebundener Baustoffe. Während der Strukturbildung wird erstmals eine simultane berührungslose Erfassung von Longitudinal- und Scherwellen vorgenommen. Unter Anwendung von tomographischen Methoden (2D-Laufzeit¬tomo¬graphie) werden überlagerungsfreie Informationen zur räumlichen Verteilung struktureller Gefügeveränderungen anhand der longitudinalen Ausbreitungsgeschwindigkeit bzw. des relativen dynamischen Elastizitätsmoduls innerhalb von virtuellen Schnittebenen geschädigter Probekörper gewonnen. Als beton-schädigende Mechanismen werden exemplarisch der kombinierte Frost-Tausalz-Angriff sowie die Alkali-Kieselsäure-Reaktion (AKR) herangezogen.
Die im Rahmen dieser Arbeit entwickelten Verfahren der zerstörungsfreien Prüfung bieten erweiterte Möglichkeiten zur Charakterisierung zementgebundener Baustoffe und deren strukturellen Veränderungen und lassen sich zielgerichtet in der Werkstoffentwicklung, bei der Qualitätssicherung sowie zur Analyse von Schadensprozessen und -ursachen einsetzen.
Bauablaufplänen kommt bei der Realisierung von Bauprojekten eine zentrale Rolle zu. Sie dienen der Koordination von Schnittstellen und bilden für die am Projekt Beteiligten die Grundlage für ihre individuelle Planung. Eine verlässliche Terminplanung ist daher von großer Bedeutung, tatsächlich sind aber gerade Bauablaufpläne für ihre Unzuverlässigkeit bekannt.
Aufgrund der langen Vorlaufzeiten bei der Planung von Bauprojekten sind zum Zeitpunkt der Planung viele Informationen nur als Schätzwerte bekannt. Auf der Grundlage dieser geschätzten und damit mit Unsicherheiten behafteten Daten werden im Bauwesen deterministische Terminpläne erstellt. Kommt es während der Realisierung zu Diskrepanzen zwischen Schätzungen und Realität, erfordert dies die Anpassung der Pläne. Aufgrund zahlreicher Abhängigkeiten zwischen den geplanten Aktivitäten können einzelne Planänderungen vielfältige weitere Änderungen und Anpassungen nach sich ziehen und damit einen reibungslosen Projektablauf gefährden.
In dieser Arbeit wird ein Vorgehen entwickelt, welches Bauablaufpläne erzeugt, die im Rahmen der durch das Projekt definierten Abhängigkeiten und Randbedingungen in der Lage sind, Änderungen möglichst gut zu absorbieren. Solche Pläne, die bei auftretenden Änderungen vergleichsweise geringe Anpassungen des Terminplans erfordern, werden hier als robust bezeichnet.
Ausgehend von Verfahren der Projektplanung und Methoden zur Berücksichtigung von Unsicherheiten werden deterministische Terminpläne bezüglich ihres Verhaltens bei eintretenden Änderungen betrachtet. Hierfür werden zunächst mögliche Unsicherheiten als Ursachen für Änderungen benannt und mathematisch abgebildet. Damit kann das Verhalten von Abläufen für mögliche Änderungen betrachtet werden, indem die durch Änderungen erzwungenen angepassten Terminpläne simuliert werden. Für diese Monte-Carlo-Simulationen der angepassten Terminpläne wird sichergestellt, dass die angepassten Terminpläne logische Weiterentwicklungen des deterministischen Terminplans darstellen. Auf der Grundlage dieser Untersuchungen wird ein stochastisches Maß zur Quantifizierung der Robustheit erarbeitet, welches die Fähigkeit eines Planes, Änderungen zu absorbieren, beschreibt. Damit ist es möglich, Terminpläne bezüglich ihrer Robustheit zu vergleichen.
Das entwickelte Verfahren zur Quantifizierung der Robustheit wird in einem Optimierungsverfahren auf Basis Genetischer Algorithmen angewendet, um gezielt robuste Terminpläne zu erzeugen. An Beispielen werden die Methoden demonstriert und ihre Wirksamkeit nachgewiesen.
The Gated Community (GC) phenomenon in Latin American cities has become an inherent element of their urban development, despite academical debate, their approach thrives within the housing market; not surprisingly, as some of the premises on which GCs are based, namely safety, control and supervision intersperse seamlessly with the insecure conditions of the contexts from which they arise. The current security crisis in Mexico, triggered in 2006 by the so-called war on drugs, has reached its peak with the highest insecurity rates in decades, representing a unique chance to study these interactions. Although the leading term of this research, Urban Agoraphobia, implies a causal dichotomy between the rise in the sense of fear amongst citizens and housing confinement as lineal consequence, I acknowledge that GCs represent a complex phenomenon, a hub of diverse factors and multidimensional processes held on four fundamental levels: global, social, individual and state-related. The focus of this dissertation is set on the individual plane and contributes, from the analysis of the GC’s resident’s perspective, experiences and perceptions, to a debate that has usually been limited to the scrutiny of other drivers, disregarding the role of dweller’s underlying fears, motivations and concerns. Assuming that the current ruling security model in Mexico tends to empower its commodification rather than its collective quality, this research draws upon the use of a methodological triangulation, along conceptual and contextual analyses, to test the hypothesis that insecurity plays an increasingly major role, leading citizens into the belief that acquiring a household in a controlled and surveilled community represents a counterweight against the feared environment of the open city. The focus of the analysis lies on the internal hatch of community ties as potential palliative for the provision of a sense of security, aiming to transcend the unidimensional discourse of GCs as defined mainly by their defensive apparatus. Residents’ perspectives acquired through ethnographical analyses may provide the chance to gain an essential view into a phenomenon that further consolidates without a critical study of its actual implications, not only for Mexican cities, but also for the Latin American and global contexts.
In recent years, lightweight materials, such as polymer composite materials (PNCs) have been studied and developed due to their excellent physical and chemical properties. Structures composed of these composite materials are widely used in aerospace engineering structures, automotive components, and electrical devices. The excellent and outstanding mechanical, thermal, and electrical properties of Carbon nanotube (CNT) make it an ideal filler to strengthen polymer materials’ comparable properties. The heat transfer of composite materials has very promising engineering applications in many fields, especially in electronic devices and energy storage equipment. It is essential in high-energy density systems since electronic components need heat dissipation functionality. Or in other words, in electronic devices the generated heat should ideally be dissipated by light and small heat sinks.
Polymeric composites consist of fillers embedded in a polymer matrix, the first ones will significantly affect the overall (macroscopic) performance of the material. There are many common carbon-based fillers such as single-walled carbon nanotubes (SWCNT), multi-walled carbon nanotubes (MWCNT), carbon nanobuds (CNB), fullerene, and graphene. Additives inside the matrix have become a popular subject for researchers. Some extraordinary characters, such as high-performance load, lightweight design, excellent chemical resistance, easy processing, and heat transfer, make the design of polymeric nanotube composites (PNCs) flexible. Due to the reinforcing effects with different fillers on composite materials, it has a higher degree of freedom and can be designed for the structure according to specific applications’ needs. As already stated, our research focus will be on SWCNT enhanced PNCs. Since experiments are timeconsuming, sometimes expensive and cannot shed light into phenomena taking place for instance at the interfaces/interphases of composites, they are often complemented through theoretical and computational analysis.
While most studies are based on deterministic approaches, there is a comparatively lower number of stochastic methods accounting for uncertainties in the input parameters. In deterministic models, the output of the model is fully determined by the parameter values and the initial conditions. However, uncertainties in the input parameters such as aspect ratio, volume fraction, thermal properties of fiber and matrix need to be taken into account for reliable predictions. In this research, a stochastic multiscale method is provided to study the influence of numerous uncertain input parameters on the thermal conductivity of the composite. Therefore, a hierarchical multi-scale method based on computational homogenization is presented in to predict the macroscopic thermal conductivity based on the fine-scale structure. In order to study the inner mechanism, we use the finite element method and employ surrogate models to conduct a Global Sensitivity Analysis (GSA). The SA is performed in order to quantify the influence of the conductivity of the fiber, matrix, Kapitza resistance, volume fraction and aspect ratio on the macroscopic conductivity. Therefore, we compute first-order and total-effect sensitivity indices with different surrogate models.
As stochastic multiscale models are computational expensive, surrogate approaches are commonly exploited. With the emergence of high performance computing and artificial intelligence, machine learning has become a popular modeling tool for numerous applications. Machine learning (ML) is commonly used in regression and maps data through specific rules with algorithms to build input and output models. They are particularly useful for nonlinear input-output relationships when sufficient data is available. ML has also been used in the design of new materials and multiscale analysis. For instance, Artificial neural networks and integrated learning seem to be ideally for such a task. They can theoretically simulate any non-linear relationship through the connection of neurons. Mapping relationships are employed to carry out data-driven simulations of inputs and outputs in stochastic modeling.
This research aims to develop a stochastic multi-scale computational models of PNCs in heat transfer. Multi-scale stochastic modeling with uncertainty analysis and machine learning methods consist of the following components:
-Uncertainty Analysis. A surrogate based global sensitivity analysis is coupled with a hierarchical multi-scale method employing computational homogenization. The effect of the conductivity of the fibers and the matrix, the Kapitza resistance, volume fraction and aspect ratio on the ’macroscopic’ conductivity of the composite is systematically studied. All selected surrogate models yield consistently the conclusions that the most influential input parameters are the aspect ratio followed by the volume fraction. The Kapitza Resistance has no significant effect on the thermal conductivity of the PNCs. The most accurate surrogate model in terms of the R2 value is the moving least square (MLS).
-Hybrid Machine Learning Algorithms. A combination of artificial neural network (ANN) and particle swarm optimization (PSO) is applied to estimate the relationship between variable input and output parameters. The ANN is used for modeling the composite while PSO improves the prediction performance through an optimized global minimum search. The thermal conductivity of the fibers and the matrix, the kapitza resistance, volume fraction and aspect ratio are selected as input parameters. The output is the macroscopic (homogenized) thermal conductivity of the composite. The results show that the PSO significantly improves the predictive ability of this hybrid intelligent algorithm, which outperforms traditional neural networks.
-Stochastic Integrated Machine Learning. A stochastic integrated machine learning based multiscale approach for the prediction of the macroscopic thermal conductivity in PNCs is developed. Seven types of machine learning models are exploited in this research, namely Multivariate Adaptive Regression Splines (MARS), Support Vector Machine (SVM), Regression Tree (RT), Bagging Tree (Bag), Random Forest (RF), Gradient Boosting Machine (GBM) and Cubist. They are used as components of stochastic modeling to construct the relationship between the variable of the inputs’ uncertainty and the macroscopic thermal conductivity of PNCs. Particle Swarm Optimization (PSO) is used for hyper-parameter tuning to find the global optimal values leading to a significant reduction in the computational cost. The advantages and disadvantages of various methods are also analyzed in terms of computing time and model complexity to finally give a recommendation for the applicability of different models.
The detailed structural analysis of thin-walled circular pipe members often requires the use of a shell or solid-based finite element method. Although these methods provide a very good approximation of the deformations, they require a higher degree of discretization which causes high computational costs. On the other hand, the analysis of thin-walled circular pipe members based on classical beam theories is easy to implement and needs much less computation time, however, they are limited in their ability to approximate the deformations as they cannot consider the deformation of the cross-section.
This dissertation focuses on the study of the Generalized Beam Theory (GBT) which is both accurate and efficient in analyzing thin-walled members. This theory is based on the separation of variables in which the displacement field is expressed as a combination of predetermined deformation modes related to the cross-section, and unknown amplitude functions defined on the beam's longitudinal axis. Although the GBT was initially developed for long straight members, through the consideration of complementary deformation modes, which amend the null transverse and shear membrane strain assumptions of the classical GBT, problems involving short members, pipe bends, and geometrical nonlinearity can also be analyzed using GBT. In this dissertation, the GBT formulation for the analysis of these problems is developed and the application and capabilities of the method are illustrated using several numerical examples. Furthermore, the displacement and stress field results of these examples are verified using an equivalent refined shell-based finite element model.
The developed static and dynamic GBT formulations for curved thin-walled circular pipes are based on the linear kinematic description of the curved shell theory. In these formulations, the complex problem in pipe bends due to the strong coupling effect of the longitudinal bending, warping and the cross-sectional ovalization is handled precisely through the derivation of the coupling tensors between the considered GBT deformation modes. Similarly, the geometrically nonlinear GBT analysis is formulated for thin-walled circular pipes based on the nonlinear membrane kinematic equations. Here, the initial linear and quadratic stress and displacement tangent stiffness matrices are built using the third and fourth-order GBT deformation mode coupling tensors.
Longitudinally, the formulation of the coupled GBT element stiffness and mass matrices are presented using a beam-based finite element formulation. Furthermore, the formulated GBT elements are tested for shear and membrane locking problems and the limitations of the formulations regarding the membrane locking problem are discussed.
Inhaltlich beschäftigt sich die Arbeit, die im Rahmen des Promotionsstudiengangs Kunst und Gestaltung an der Bauhaus-Universität entstand, mit der Erforschung sozio-interaktiver Potentiale der Videotelefonie im Kontext von Nähe und Verbundenheit mit Fokus auf Eigenbild, Embodiment sowie den Rederechtswechsel.
Die Videotelefonie als Kommunikationsform hat sich – und darauf deuten die Erfahrungen der Co- vid-19-Pandemie hin – im lebensweltlichen Alltag der Menschen etabliert und wird dort in naher Zukunft nicht mehr wegzudenken sein. Auf Basis ihrer Möglichkeiten und Errungenschaften ist es inzwischen Realität und Lebenswirklichkeit, dass die Kommunikation sowohl im privaten als auch im geschäftlichen Kontext mittels verschiedenster Kanäle stattfindet. Der Videotelefonie kommt hierbei als solche nicht nur eine tragende Funktion, sondern auch eine herausragende Rolle bei der vermeintlichen Reproduktion der Face-to-Face-Kommunikation im digitalen Raum zu und wird wie selbstverständlich zum zwischenmenschlichen Austausch genutzt. Just an diesem Punkt knüpft die Forschungsarbeit an. Zentral stand dabei das Vorhaben einer dezidierte Untersuchung des Forschungsgegenstandes Videotelefonie, sowohl aus Kultur- als auch Technikhistorischer, aber auch Medien-, Wahrnehmungs- wie Kommunikations- theoretischer Perspektive, indem analytische und phänosemiotische Perspektiven miteinander in Beziehung gesetzt werden (z.B. Wahrnehmungsbedingungen, Interaktionsmerkmale, realisierte Kommunikationsprozesse etc.). Damit verbundenes, wünschenswertes Ziel war es, eine möglichst zeitgemäße wie relevante Forschungsfrage zu adressieren, die neben den kulturellen Technisierungs- und Mediatisierungstendenzen in institutionellen und privaten Milieus ebenfalls eine conditio sine qua non der pandemischen (Massen-)Kommunikation entwirft.
Die Arbeit ist damit vor allem im Bereich des Produkt- und Interactiondesigns zu verorten. Darüber hinaus hatte sie das Ziel der Darlegung und Begründung der Videotelefonie als eigenständige Kommunikationsform, welche durch eigene, kommunikative Besonderheiten, die sich in ihrer jeweiligen Ingebrauchnahme sowie durch spezielle Wahrnehmungsbedingungen äußern, und die die Videotelefonie als »Rederechtswechselmedium« avant la lettre konsolidieren, gekennzeichnet ist. Dabei sollte der Beweis erbracht werden, dass die Videotelefonie nicht als Schwundstufe einer Kommunikation Face-to-Face, sondern als ein eigenständiges Mediatisierungs- und Kommunikationsereignis zu verstehen sei. Und eben nicht als eine beliebige – sich linear vom Telefon ausgehende – entwickelte Form der audio-visuellen Fernkommunikation darstellt, sondern die gestalterische (Bewegtbild-)Technizität ein eigenständiges Funktionsmaß offeriert, welches wiederum ein innovatives Kommunikationsmilieu im Kontext einer Rederechtswechsel-Medialität stabilisiert.
With the growing importance of the World Wide Web, the major challenges our society faces are also increasingly affecting the digital areas of our lives. Some of the associated problems can be addressed by computer science, and some of these specifically by data-driven research. To do so, however, requires to solve open issues related to archive quality and the large volume and variety of the data contained.
This dissertation contributes data, algorithms, and concepts towards leveraging the big data and temporal provenance capabilities of web archives to tackle societal challenges. We selected three such challenges that highlight the central issues of archive quality, data volume, and data variety, respectively:
(1) For the preservation of digital culture, this thesis investigates and improves the automatic quality assurance of the web page archiving process, as well as the further processing of the resulting archive data for automatic analysis.
(2) For the critical assessment of information, this thesis examines large datasets of Wikipedia and news articles and presents new methods for automatically determining quality and bias.
(3) For digital security and privacy, this thesis exploits the variety of content on the web to quantify the security of mnemonic passwords and analyzes the privacy-aware re-finding of the various seen content through private web archives.
The objective of this thesis was to understand the 20th-century history of informal urbanisation in Europe and its origins in Madrid and Paris. The concept of informal urbanisation was employed to refer to the process of developing shacks and precarious single-family housing areas that were not planned by the public powers and were considered to be substandard because of their below-average materials and social characteristics. Our main hypothesis was that despite being a phenomenon with ancient roots, informal urbanisation emerged as a public problem and was subsequently prohibited in connection with another historical process occurred: the birth of contemporary urban planning. Therefore, its transformation into a deviant and illegal urban growth mechanism would have been a pan-European process occurring at the same pace that urban planning developed during the first decades of the 20th century.
Analysing the 20th-century history of informal urbanisation in Europe was an ambitious task that required using a large number of sources. To contend with this issue, this thesis combined two main methods: historiographical research about informal urbanisation in Europe and archival research of two case studies, Madrid and Paris, to make the account more precise by analysing primary sources of the subject.
Our research of these informal areas, which were produced mainly through poor private allotments and housing developed on land squats, revealed two key moments of explosive growth across Europe: the 1920s and 1960s. The near disappearance of informal urbanisation throughout the continent seemed to be a consequence not of the historical development of urban planning—which was commonly transgressed and bypassed—but of the exacerbation of global economic inequalities, permitting the development of a geography of privilege in Europe.
Concerning the cases of Paris and Madrid, the origins of informal urbanisation—that is, the moment the issue started to be problematised—seemed to occur in the second half of the 19th century, when a number of hygienic norms and surveillance devices began to control housing characteristics. From that moment onwards, informal urbanisation areas formed peripheral belts in both cities. This growth became the object of an illegalisation process of which we have identified three phases: (i) the unregulated development of the phenomenon during the second half of the 20th century, (ii) the institutional production of “exception regulations” to permit a controlled development of substandard housing in the peripheral fringes of both cities, and (iii) the synchronic prohibition of informal urbanisation in the 1920s and its illegal reproduction.
In ten chapters, this thesis presents information retrieval technology which is tailored to the research activities that arise in the context of corpus-based digital humanities projects.
The presentation is structured by a conceptual research process that is introduced in Chapter 1. The process distinguishes a set of five research activities: research question generation, corpus acquisition, research question modeling, corpus annotation, and result dissemination. Each of these research activities elicits different information retrieval tasks with special challenges, for which algorithmic approaches are presented after an introduction of the core information retrieval concepts in Chapter 2.
A vital concept in many of the presented approaches is the keyquery paradigm introduced in Chapter 3, which represents an operation that returns relevant search queries in response to a given set of input documents. Keyqueries are proposed in Chapter 4 for the recommendation of related work, and in Chapter 5 for improving access to aspects hidden in the long tail of search result lists.
With pseudo-descriptions, a document expansion approach is presented in Chapter 6. The approach improves the retrieval performance for corpora where only bibliographic meta-data is originally available. In Chapter 7, the keyquery paradigm is employed to generate dynamic taxonomies for corpora in an unsupervised fashion.
Chapter 8 turns to the exploration of annotated corpora, and presents scoped facets as a conceptual extension to faceted search systems, which is particularly useful in exploratory search settings. For the purpose of highlighting the major topical differences in a sequence of sub-corpora, an algorithm called topical sequence profiling is presented in Chapter 9.
The thesis concludes with two pilot studies regarding the visualization of (re)search results for the means of successful result dissemination: a metaphoric interpretation of the information nutrition label, as well as the philosophical bodies, which are 3D-printed search results.
Das Ziel der Arbeit ist, eine mögliche Verbesserung der Güte der Lebensdauervorhersage für Gusseisenwerkstoffe mit Kugelgraphit zu erreichen, wobei die Gießprozesse verschiedener Hersteller berücksichtigt werden.
Im ersten Schritt wurden Probenkörper aus GJS500 und GJS600 von mehreren Gusslieferanten gegossen und daraus Schwingproben erstellt.
Insgesamt wurden Schwingfestigkeitswerte der einzelnen gegossenen Proben sowie der Proben des Bauteils von verschiedenen Gussherstellern weltweit entweder durch direkte Schwingversuche oder durch eine Sammlung von Betriebsfestigkeitsversuchen bestimmt.
Dank der metallografischen Arbeit und Korrelationsanalyse konnten drei wesentliche Parameter zur Bestimmung der lokalen Dauerfestigkeit festgestellt werden: 1. statische Festigkeit, 2. Ferrit- und Perlitanteil der Mikrostrukturen und 3. Kugelgraphitanzahl pro Flächeneinheit.
Basierend auf diesen Erkenntnissen wurde ein neues Festigkeitsverhältnisdiagramm (sogenanntes Sd/Rm-SG-Diagramm) entwickelt.
Diese neue Methodik sollte vor allem ermöglichen, die Bauteildauerfestigkeit auf der Grundlage der gemessenen oder durch eine Gießsimulation vorhersagten lokalen Zugfestigkeitswerte sowie Mikrogefügenstrukturen besser zu prognostizieren.
Mithilfe der Versuche sowie der Gießsimulation ist es gelungen, unterschiedliche Methoden der Lebensdauervorhersage unter Berücksichtigung der Herstellungsprozesse weiterzuentwickeln.
Isogeometric analysis (IGA) is a numerical method for solving partial differential equations (PDEs), which was introduced with the aim of integrating finite element analysis with computer-aided design systems. The main idea of the method is to use the same spline basis functions which describe the geometry in CAD systems for the approximation of solution fields in the finite element method (FEM). Originally, NURBS which is a standard technology employed in CAD systems was adopted as basis functions in IGA but there were several variants of IGA using other technologies such as T-splines, PHT splines, and subdivision surfaces as basis functions. In general, IGA offers two key advantages over classical FEM: (i) by describing the CAD geometry exactly using smooth, high-order spline functions, the mesh generation process is simplified and the interoperability between CAD and FEM is improved, (ii) IGA can be viewed as a high-order finite element method which offers basis functions with high inter-element continuity and therefore can provide a primal variational formulation of high-order PDEs in a straightforward fashion. The main goal of this thesis is to further advance isogeometric analysis by exploiting these major advantages, namely precise geometric modeling and the use of smooth high-order splines as basis functions, and develop robust computational methods for problems with complex geometry and/or complex multi-physics.
As the first contribution of this thesis, we leverage the precise geometric modeling of isogeometric analysis and propose a new method for its coupling with meshfree discretizations. We exploit the strengths of both methods by using IGA to provide a smooth, geometrically-exact surface discretization of the problem domain boundary, while the Reproducing Kernel Particle Method (RKPM) discretization is used to provide the volumetric discretization of the domain interior. The coupling strategy is based upon the higher-order consistency or reproducing conditions that are directly imposed in the physical domain. The resulting coupled method enjoys several favorable features: (i) it preserves the geometric exactness of IGA, (ii) it circumvents the need for global volumetric parameterization of the problem domain, (iii) it achieves arbitrary-order approximation accuracy while preserving higher-order smoothness of the discretization. Several numerical examples are solved to show the optimal convergence properties of the coupled IGA–RKPM formulation, and to demonstrate its effectiveness in constructing volumetric discretizations for complex-geometry objects.
As for the next contribution, we exploit the use of smooth, high-order spline basis functions in IGA to solve high-order surface PDEs governing the morphological evolution of vesicles. These governing equations are often consisted of geometric PDEs, high-order PDEs on stationary or evolving surfaces, or a combination of them. We propose an isogeometric formulation for solving these PDEs. In the context of geometric PDEs, we consider phase-field approximations of mean curvature flow and Willmore flow problems and numerically study the convergence behavior of isogeometric analysis for these problems. As a model problem for high-order PDEs on stationary surfaces, we consider the Cahn–Hilliard equation on a sphere, where the surface is modeled using a phase-field approach. As for the high-order PDEs on evolving surfaces, a phase-field model of a deforming multi-component vesicle, which consists of two fourth-order nonlinear PDEs, is solved using the isogeometric analysis in a primal variational framework. Through several numerical examples in 2D, 3D and axisymmetric 3D settings, we show the robustness of IGA for solving the considered phase-field models.
Finally, we present a monolithic, implicit formulation based on isogeometric analysis and generalized-alpha time integration for simulating hydrodynamics of vesicles according to a phase-field model. Compared to earlier works, the number of equations of the phase-field model which need to be solved is reduced by leveraging high continuity of NURBS functions, and the algorithm is extended to 3D settings. We use residual-based variational multi-scale method (RBVMS) for solving Navier–Stokes equations, while the rest of PDEs in the phase-field model are treated using a standard Galerkin-based IGA. We introduce the resistive immersed surface (RIS) method into the formulation which can be employed for an implicit description of complex geometries using a diffuse-interface approach. The implementation highlights the robustness of the RBVMS method for Navier–Stokes equations of incompressible flows with non-trivial localized forcing terms including bending and tension forces of the vesicle. The potential of the phase-field model and isogeometric analysis for accurate simulation of a variety of fluid-vesicle interaction problems in 2D and 3D is demonstrated.
The computational costs of newly developed numerical simulation play a critical role in their acceptance within both academic use and industrial employment. Normally, the refinement of a method in the area of interest reduces the computational cost. This is unfortunately not true for most nonlocal simulation, since refinement typically increases the size of the material point neighborhood. Reducing the discretization size while keep- ing the neighborhood size will often require extra consideration. Peridynamic (PD) is a newly developed numerical method with nonlocal nature. Its straightforward integral form equation of motion allows simulating dynamic problems without any extra consideration required. The formation of crack and its propagation is known as natural to peridynamic. This means that discontinuity is a result of the simulation and does not demand any post-processing. As with other nonlocal methods, PD is considered an expensive method. The refinement of the nodal spacing while keeping the neighborhood size (i.e., horizon radius) constant, emerges to several nonphysical phenomena.
This research aims to reduce the peridynamic computational and imple- mentation costs. A novel refinement approach is introduced. The pro- posed approach takes advantage of the PD flexibility in choosing the shape of the horizon by introducing multiple domains (with no intersections) to the nodes of the refinement zone. It will be shown that no ghost forces will be created when changing the horizon sizes in both subdomains. The approach is applied to both bond-based and state-based peridynamic and verified for a simple wave propagation refinement problem illustrating the efficiency of the method. Further development of the method for higher dimensions proves to have a direct relationship with the mesh sensitivity of the PD. A method for solving the mesh sensitivity of the PD is intro- duced. The application of the method will be examined by solving a crack propagation problem similar to those reported in the literature.
New software architecture is proposed considering both academic and in- dustrial use. The available simulation tools for employing PD will be collected, and their advantages and drawbacks will be addressed. The challenges of implementing any node base nonlocal methods while max- imizing the software flexibility to further development and modification will be discussed and addressed. A software named Relation-Based Sim- ulator (RBS) is developed for examining the proposed architecture. The exceptional capabilities of RBS will be explored by simulating three distinguished models. RBS is available publicly and open to further develop- ment. The industrial acceptance of the RBS will be tested by targeting its performance on one Mac and two Linux distributions.
Die Europatournee des Indischen Menaka-Balletts von 1936-38 ist der Ausgangspunkt dieser archivologischen Navigation entlang der Spuren indischer KünstlerInnen in Europa. In einer breit angelegten Archivrecherche wurden dazu Dokumente, Fundstücke, orale Erinnerungen und ethnografische Beobachtungen aus dem Kontext der Menaka-Tournee durch das nationalsozialistische Deutschland zusammengetragen.
Das Buch beschreibt den Rekonstruktionsprozess eines bedeutsamen Projekts der indischen Tanzmoderne. Es verfolgt dabei eine Methode, mit der sich die fragmentierten Dokumente des Medienereignisses als Spur lesen lassen und nutzt eine künstlerisch-forschende Involvierung in gegenwärtige Erinnerungspolitiken, in welche die verflochtenen Strukturen der künstlerischen Avantgarde zwischen Kolkata, Mumbai und Berlin hineinreichen. Die Spur des Menaka-Ballett erweist sich dabei als Teil weitreichender ideologischer, tänzerischer, musikalischer, filmischer und literarischer Strömungen, die auch in gegenwärtigen kulturellen Bestimmungen fortwirken.
Fotografien, Zeitungsberichte, Film- und Tonaufnahmen, Briefe und persönliche Erinnerungstücke erzählen davon, wie sich, vor dem Hintergrund der im antikolonialen Aufbruch befindlichen Kulturreform in Indien, und der nationsozialistisch-völkischen Kulturpolitik in Deutschland, die Tänzerinnen und Musiker der indischen Ballettgruppe und die deutsche Öffentlichkeit im gegenseitigen Spiegel betrachteten, während die Vorzeichen des kommenden Krieges immer deutlicher wurden.
Das Ziel dieser Arbeit war es, neuartige Fließmittel auf Basis von Stärke als nachwachsenden Rohstoff zu synthetisieren und die Wechselwirkung mit Portlandzement zu charakterisieren. Die Notwendigkeit, Alternativen zu synthetischen Zusatzmittel zu erforschen, ergibt sich aus der benötigten Menge zur Verarbeitung von ca. 4,1 Gt/a, wobei ca. 85 % der Zusatzmittel auf die Fließmittel entfallen.
Um Fließmittel aus Stärke zu synthetisieren, wurden drei Basisstärken unterschiedlicher Herkunft verwendet. Es wurde eine Maniokstärke mit einer niedrigen Molekularmasse und eine Weizenstärke mit einer hohen Molekularmasse verwendet. Darüber hinaus wurde eine Kartoffelstärke mit einer mittleren Molekularmasse, die ein Abfallprodukt der kartoffelverarbeitenden Industrie darstellt, genutzt. Die Stärkefließmittel wurden durch chemische Modifikation in einem zweistufigen Prozess synthetisiert. Im ersten Schritt wurde das Molekulargewicht der Weizen- und Kartoffelstärke durch säurehydrolytischen Abbau verringert. Für die kurzkettige Maniokstärke war eine Degradation der Molekularmasse nicht notwendig. Im zweiten Syntheseschritt wurden anionische Ladungen durch das Versetzen der degradierten Stärken und Maniokstärke mit Natriumvinylsulfonat in die Stärkemoleküle eingeführt.
Beurteilung der Synthesemethode zur Erzeugung von Stärkefließmitteln
In diesem Zusammenhang sollten molekulare Parameter der Stärkefließmittel gezielt eingestellt werden, um eine Fließwirkung im Portlandzement zu erhalten. Insbesondere die Molekularmasse und die Menge anionischer Ladungen sollte variiert werden, um Abhängigkeiten mit der Dispergierleistung zu identifizieren.
1. Es konnte durch GPC-Messungen gezeigt werden, dass die Molekularmasse der langkettigen Weizenstärke durch die gewählten Modifizierungsbedingungen zum säurehydrolytischen Abbau verringert werden konnte. Durch Variation der säurehydrolytischen Bedingungen wurden 4 degradierte Weizenstärken erzeugt, die eine Reduzierung der Molekularmasse um 27,5 – 43 % aufwiesen. Die Molekularmasse der Kartoffelstärke konnte durch säurehydrolytischen Abbau um ca. 26 % verringert werden.
2. Durch PCD-Messungen wurde gezeigt, dass anionische Ladungen durch Sulfoethylierung der freien Hydroxylgruppen in die degradierten Stärken eingeführt werden konnten. Durch Variation der Dauer der Sulfoethylierung konnte die Menge der anionischen Ladungen gesteuert und gezielt variiert werden, so dass Stärkefließmittel mit steigender Ladungsmenge in folgender Reihenfolge synthetisiert wurden:
W-3 < W-2 < K-1 < W¬-4 < W¬1 < M-1
Im Ergebnis der chemischen Modifizierung konnten 6 Stärkefließmittel mit variierten Molekularmassen und anionischen Ladungen erzeugt werden. Es konnte gezeigt werden, dass die Herkunft der Stärke für die chemische Modifizierung unerheblich ist. Die Fließmittel lagen synthesebedingt als basische, wässrige Suspensionen mit Wirkstoffgehalten im Bereich von 23,5 – 50 % vor.
Beurteilung der Dispergierleistung der synthetisierten Stärkefließmittel
Die Dispergierperformance wurde durch rheologische Experimente mit einem Rotationsviskosimeter erfasst. Dabei wurden der Einfluss auf die Fließkurven und die Viskositätskurven betrachtet. Durch Vergleich der Dispergierleistung mit einem Polykondensat- und einem PCE-Fließmittel konnte eine Einordnung und Bewertung der Fließmittel vorgenommen werden.
3. Die rheologische Experimente haben gezeigt, dass die Stärkefließmittel eine vergleichbar hohe Dispergierleistung aufweisen, wie das zum Vergleich herangezogen PCE-Fließmittel. Darüber hinaus zeigte sich, dass die Fließwirkung der 6 Stärkefließmittel gegenüber dem Polykondensatfließmittel deutlich höher ist. Das aus der Literatur bekannte Einbrechen der Dispergierleistung der Polykondensat-fließmittel bei w/z-Werten < 0,4 konnte bestätigt werden.
4. Alle 6 Stärkefließmittel führten zu einer Verringerung der Fließgrenze und der dynamischen Viskosität des Zementleimes bei einem w/z-Wert von 0,35.
5. Der Vergleich der Dispergierleistung der Stärkefließmittel untereinander zeigte, dass die anionische Ladungsmenge einen Schlüsselparameter darstellt. Die Stärkefließmittel M-1, K-1, W-1 und W-4 mit anionischen Ladungsmengen > 6 C/g zeigten die höchste Dispergier¬performance. Die vergleichend herangezogenen klassischen Fließmittel wiesen anionische Ladungsmengen im Bereich von 1,2 C/g (Polycondensat) und 1,6 C/g (PCE) auf. Die Molekularmasse schien für die Dispergierleistung zunächst unerheblich zu sein. Aus diesem Grund wurde die Basisweizenstärke erneut chemisch modifiziert, indem anionische Ladungen eingeführt wurden, ohne die Molekularmasse jedoch zu verringern. Das Stärkederivat wies verdickende Eigenschaften im Zementleim auf. Daraus konnte geschlussfolgert werden, dass eine definierte Grenzmolekularmasse (150.000 Da) existiert, die unterschritten werden muss, um Fließmittel aus Stärke zu erzeugen. Des Weiteren zeigen die Ergebnisse, dass durch die chemische Modifizierung sowohl Fließmittel als auch Verdicker aus Stärke erzeugt werden können.
Beurteilung der Beeinflussung der Hydratation und der Porenlösung des Portlandzementes
Aus der Literatur ist bekannt, dass Fließmittel die Hydratation von Portlandzement maßgeblich beeinflussen können. Aus diesem Grund wurden kalorimetrische und konduktometrische Untersuchungen an Zementsuspensionen, die mit den synthetisierten Stärkefließmitteln versetzt wurden, durchgeführt. Ergänzt wurden die Untersuchungen durch Porenlösungsanalysen zu verschiedenen Zeitpunkten der Hydratation.
6. Die kalorimetrischen Untersuchungen zur Beeinflussung der Hydratation des Portlandzementes zeigten, dass die dormante Periode durch die Zugabe der Stärkefließmittel z.T. erheblich verlängert wird. Es konnte gezeigt werden, dass, je höher die anionische Ladungsmenge der Stärkefließmittel ist, desto länger dauert die dormante Periode andauert. Darüber hinaus zeigte sich, dass eine niedrige Molekularmasse der Stärkefließmittel die Verlängerung der dormanten Periode begünstigt.
7. Durch die konduktometrischen Untersuchungen konnte gezeigt werden, dass alle Stärkefließmittel die Dauer des freien- und diffusionskontrollierten CSH-Phasenwachstums verlangsamen. Insbesondere die Ausfällung des Portlandits, welches mit dem Erstarrungsbeginn korreliert, erfolgt zu deutlich späteren Zeitpunkten. Des Weiteren korrelierten die konduktometrischen Untersuchungen mit der zeitlichen Entwicklung der Calciumkonzentration der Porenlösungen. Der Vergleich der Stärkefließmittel untereinander zeigte, dass die Molekularmasse ein Schlüsselparameter ist. Das Stärkefließmittel M-1 mit der geringsten Molekularmasse, welches geringe Mengen kurzkettiger Anhydroglucoseeinheiten aufweist, verzögert die Hydratphasenbildung am stärksten. Diese Wirkung ist vergleichbar mit der von Zuckern. Darüber hinaus deuteten die Ergebnisse daraufhin, dass die Stärkefließmittel auf den ersten Hydratationsprodukten adsorbieren, wodurch die Hydratphasenbildung verlangsamt wird.
Die kalorimetrischen und konduktometrischen Daten sowie die Ergebnisse der Porenlösungsanalytik des Zementes, erforderten eine genauere Betrachtung der Beeinflussung der Hydratation der Klinkerphasen C3A und C3S, durch die Stärkefließmittel. Demzufolge wurden die Untersuchungen mit den Klinkerphasen C3A und C3S in Analogie zum Portlandzement durchgeführt.
Beurteilung der Beeinflussung der Hydratation und der Porenlösung des C3A
Während die kalorimetrischen Untersuchungen zur C3A-Hydratation eine Tendenz zur verlangsamten Hydratphasenbildung durch die Stärkefließmittel aufzeigten, lieferten die konduktometrischen Ergebnisse grundlegende Erkenntnisse zur Beeinflussung der C3A-Hydratation. Das Stadium I der C3A-Hydratation ist durch einen Abfall der elektrischen Leitfähigkeit geprägt. Dies korreliert mit dem Absinken der Calciumionenkonzentration und dem Anstieg der Aluminiumionenkonzentration in der Porenlösung der C3A-Suspensionen. Im Anschluss an das Stadium I bildet sich ein Plateau in den elektrischen Leitfähigkeitskurven aus.
8. Es konnte gezeigt werden, dass die Stärkefließmittel das Stadium I der C3A-Hydratation, d.h. die Auflösung und Bildung erster Calciumaluminathydrate verlangsamen. Insbesondere die Stärkefließmittel mit höherer Molekularmasse erhöhten die Dauer des Stadium I. Das Stadium II wird durch die Stärkefließmittel in folgender Reihenfolge am stärksten verlängert: M-1 > W-3 > K-1 > W-2 ≥ W-4 und verdeutlicht, dass keine Abhängigkeit von der anionischen Ladungsmenge identifiziert werden konnte. Die Ergebnisse zeigten, dass speziell die kurzkettige Stärke M-1, das Stadium II länger aufrechterhalten.
9. Das Stadium III und IV der C3A-Hydratation wird insbesondere durch die Stärkefließmittel mit höherer Molekularmasse verlängert.
Die Ergebnisse der Porenlösungsanalytik korrelieren mit den Ergebnissen der elektrischen Leitfähigkeit. Speziell die zeitlichen Verläufe der Calciumionenkonzentration bildeten die Verläufe der Konduktivitätskurven der C3A-Hydratation mit großer Übereinstimmung ab.
Beurteilung der Beeinflussung der Hydratation und der Porenlösung des C3S
Die Ergebnisse der kalorimetrischen Untersuchungen zur Beeinflussung der C3S-Hydratation durch die Stärkefließmittel zeigen, dass diese maßgeblich verlangsamt wird. Das Maximum des Haupthydratationspeaks wird zu späteren Zeiten verschoben und auch die Höhe des Maximums wird deutlich verringert. Durch die konduktometrischen Experimente wurde aufgeklärt, welche Stadien der C3S-Hydrataion beeinflusst wurden.
10. Es konnte gezeigt werden, dass sowohl die Menge der eingebrachten anionischen Ladungen als auch das Vorhandensein sehr kleiner Stärkefließmittelmoleküle (Zucker), Schlüsselparameter der verzögerten Hydratationskinetik des C3S sind. Der grundlegende Mechanismus der Hydratationsverzögerung beruht auf einer Kombination aus verminderter CSH-Keimbildung und Adsorptionsprozessen auf den ersten gebildeten CSH-Phasen der C3S-Partikel.
Beurteilung des Adsorptionsverhaltens am Zement, C3A und C3S
Die Bestimmung des Adsorptionsverhaltens der Stärkefließmittel erfolgte mit der Phenol-Schwefelsäure-Methode an Zement,- C3A- und C3S-Suspensionen. Durch den Vergleich der Adsorptionsraten und Adsorptionsmengen in Abhängigkeit von den molekularen Parametern der Stärkefließmittel wurde ein Wechselwirkungsmodell identifiziert.
11. Die Ursache für die hohe Dispergierleistung der Stärkefließmittel liegt in Adsorptionsprozessen an den ersten gebildeten Hydratphasen des Zementes begründet. Die Molekularmasse der Stärkefließmittel ist ein Schlüsselparameter der entscheidend für den Mechanismus der Adsorption ist. Während anionische, langkettige Stärken an mehreren Zementpartikeln gleichzeitig adsorbieren und für eine Vernetzung der Zementpartikel untereinander sorgen (Verdickerwirkung), adsorbieren kurzkettige anionische Stärken lediglich an den ersten gebildeten Hydratphasen der einzelnen Zementpartikel und führen zu elektrostatischer Abstoßung (Fließmittelwirkung).
12. Es konnte gezeigt werden, dass die Stärkefließmittel mit geringerem Molekulargewicht bei höheren Konzentrationen an den Hydratphasen des Zementes adsorbieren. Die Stärkefließmittel mit höherer Molekularmasse erreichen bei einer Zugabemenge von 0,7 % ein Plateau. Daraus wird geschlussfolgert, dass die größeren Fließmittelmoleküle einen erhöhten Platzbedarf erfordern und zur Absättigung der hydratisierenden Oberflächen bei geringeren Zugabemengen führen. Darüber hinaus konnte gezeigt werden, dass die Stärkefließmittel mit höherer anionischer Ladungsmenge zu höheren Adsorptionsmengen auf den Zement-, C3A- und C3S-Partikeln führen.
13. Die Adsorptionsprozesse finden an den ersten gebildeten Hydratphasen der C3A-Partikel statt, wodurch sowohl die Auflösung des C3A als auch die Bildung der Calciumhydroaluminate verlangsamt wird. Darüber hinaus wurde festgestellt, dass die Verlangsamung des freien- und diffusionskontrollierten Hydratphasenwachstums des C3S, durch die Adsorption der Stärkefließmittel auf den ersten gebildeten CSH-Phasen hervorgerufen wird. Des Weiteren wurde festgestellt, dass sehr kleine zuckerähnliche Moleküle in der kurzkettigen Maniokstärke in der Lage sind, die Bildung der ersten CSH-Keime zu unterdrücken. Dadurch kann die langanhaltende Plateauphase der elektrischen Leitfähigkeit der C3S-Hydratation erklärt werden.
Beurteilung der Porenstruktur- und Festigkeitsausbildung
Die Beurteilung der Qualität der Mikrostruktur erfolgte durch die Bestimmung der Rohdichte und der Porenradienverteilung mit Hilfe der Quecksilberhochdruckporosimetrie. Durch das Versetzen der Zementleime mit den Stärkefließmitteln konnten bei gleichbleibender Verarbeitbarkeit Zementsteinprobekörper mit einem um 17,5 % geringeren w/z-Wert von 0,35 hergestellt werden. Die Absenkung des w/z-Wertes führt zu einem Anstieg der Rohdichte des Zementsteins.
14. Durch die Zugabe der Stärkefließmittel und den verringerten w/z-Wert wird die Porenstruktur der Zementsteinproben im Vergleich zum Referenzzementstein verfeinert, da die Gesamtporosität sinkt. Insbesondere der Kapillarporenanteil wird verringert und der Gelporenanteil erhöht. Im Unterschied zu den PCE-Fließmitteln führt die Zugabe der Stärkefließmittel zu keinem erhöhten Eintrag von Luftporen. Dies wiederum hat zur Folge, dass bei der Verwendung der Stärkefließmittel auf Entschäumer verzichtet werden kann.
15. Entsprechend der dichteren Zementsteinmatrix wurden für die Zementsteine mit den Stärkefließmitteln nach 7 d und 28 d, erhöhte Biegezug- und Druckfestigkeiten ermittelt. Insbesondere die 28 d Druckfestigkeit wurde durch den verringerten w/z-Wert um die Faktoren 3,5 - 6,6 erhöht.
The aim of this study is controlling of spurious oscillations developing around discontinuous solutions of both linear and non-linear wave equations or hyperbolic partial differential equations (PDEs). The equations include both first-order and second-order (wave) hyperbolic systems. In these systems even smooth initial conditions, or smoothly varying source (load) terms could lead to discontinuous propagating solutions (fronts). For the first order hyperbolic PDEs, the concept of central high resolution schemes is integrated with the multiresolution-based adaptation to capture properly both discontinuous propagating fronts and effects of fine-scale responses on those of larger scales in the multiscale manner. This integration leads to using central high resolution schemes on non-uniform grids; however, such simulation is unstable, as the central schemes are originally developed to work properly on uniform cells/grids. Hence, the main concern is stable collaboration of central schemes and multiresoltion-based cell adapters. Regarding central schemes, the considered approaches are: 1) Second order central and central-upwind schemes; 2) Third order central schemes; 3) Third and fourth order central weighted non-oscillatory schemes (central-WENO or CWENO); 4) Piece-wise parabolic methods (PPMs) obtained with two different local stencils. For these methods, corresponding (nonlinear) stability conditions are studied and modified, as well. Based on these stability conditions several limiters are modified/developed as follows: 1) Several second-order limiters with total variation diminishing (TVD) feature, 2) Second-order uniformly high order accurate non-oscillatory (UNO) limiters, 3) Two third-order nonlinear scaling limiters, 4) Two new limiters for PPMs. Numerical results show that adaptive solvers lead to cost-effective computations (e.g., in some 1-D problems, number of adapted grid points are less than 200 points during simulations, while in the uniform-grid case, to have the same accuracy, using of 2049 points is essential). Also, in some cases, it is confirmed that fine scale responses have considerable effects on higher scales.
In numerical simulation of nonlinear first order hyperbolic systems, the two main concerns are: convergence and uniqueness. The former is important due to developing of the spurious oscillations, the numerical dispersion and the numerical dissipation. Convergence in a numerical solution does not guarantee that it is the physical/real one (the uniqueness feature). Indeed, a nonlinear systems can converge to several numerical results (which mathematically all of them are true). In this work, the convergence and uniqueness are directly studied on non-uniform grids/cells by the concepts of local numerical truncation error and numerical entropy production, respectively. Also, both of these concepts have been used for cell/grid adaptations. So, the performance of these concepts is also compared by the multiresolution-based method. Several 1-D and 2-D numerical examples are examined to confirm the efficiency of the adaptive solver. Examples involve problems with convex and non-convex fluxes. In the latter case, due to developing of complex waves, proper capturing of real answers needs more attention. For this purpose, using of method-adaptation seems to be essential (in parallel to the cell/grid adaptation). This new type of adaptation is also performed in the framework of the multiresolution analysis.
Regarding second order hyperbolic PDEs (mechanical waves), the regularization concept is used to cure artificial (numerical) oscillation effects, especially for high-gradient or discontinuous solutions. There, oscillations are removed by the regularization concept acting as a post-processor. Simulations will be performed directly on the second-order form of wave equations. It should be mentioned that it is possible to rewrite second order wave equations as a system of first-order waves, and then simulated the new system by high resolution schemes. However, this approach ends to increasing of variable numbers (especially for 3D problems).
The numerical discretization is performed by the compact finite difference (FD) formulation with desire feature; e.g., methods with spectral-like or optimized-error properties. These FD methods are developed to handle high frequency waves (such as waves near earthquake sources). The performance of several regularization approaches is studied (both theoretically and numerically); at last, a proper regularization approach controlling the Gibbs phenomenon is recommended.
At the end, some numerical results are provided to confirm efficiency of numerical solvers enhanced by the regularization concept. In this part, shock-like responses due to local and abrupt changing of physical properties, and also stress wave propagation in stochastic-like domains are studied.
Diese Dissertation untersucht Handlungsressourcen von zivilgesellschaftlichen Akteuren in Planungsprozessen um innerstädtische Planungsverfahren. Den theoretischen Rahmen bilden die Kapitalarten von Pierre Bourdieu, die zusammen mit dem Matrixraum von Dieter Läpple zu einem neuen Feldbegriff des ‚Raumfeldes‘ zusammengeführt und operationalisiert wurden. Es handelt sich um eine qualitative Arbeit, die zwischen Stadtsoziologie und Urbanistik zu verorten ist. Als Fallbeispiele wurde die Erweiterung des Berliner Mauerparks sowie das Baugebiet „So! Berlin“ in Berlin gewählt.
El paisaje de la Cuenca Lechera Central Argentina: la huella de la producción sobre el territorio
(2022)
In recent times, the study of landscape heritage acquires value by virtue of becoming an alternative to rethink regional development, especially from the point of view of territorial planning. In this sense, the Central Argentine Dairy Basin (CADB) is presented as a space where the traces of different human projects have accumulated over centuries of occupation, which can be read as heritage. The impact of dairy farming and other productive activities has shaped the configuration of its landscape. The main hypothesis assumed that a cultural landscape would have been formed in the CADB, whose configuration would have depended to a great extent on the history of productive activities and their deployment over the territory, and this same history would hide the keys to its alternative.
The thesis approached the object of study from descriptive and cartographic methods that placed the narration of the history of territory and the resources of the landscape as a discursive axis. A series of intentional readings of the territory and its constituent parts pondered the layers of data that have accumulated on it in the form of landscape traces, with the help of an approach from complementary dimensions (natural, sociocultural, productive, planning). Furthermore, the intersection of historical sources was used in order to allow the construction of the territorial story and the detection of the origin of the landscape components. A meticulous cartographic work also helped to spatialise the set of phenomena and elements studied, and was reflected in a multiscalar scanning.
Finite Element Simulations of dynamically excited structures are mainly influenced by the mass, stiffness, and damping properties of the system, as well as external loads. The prediction quality of dynamic simulations of vibration-sensitive components depends significantly on the use of appropriate damping models. Damping phenomena have a decisive influence on the vibration amplitude and the frequencies of the vibrating structure. However, developing realistic damping models is challenging due to the multiple sources that cause energy dissipation, such as material damping, different types of friction, or various interactions with the environment.
This thesis focuses on thermoelastic damping, which is the main cause of material damping in homogeneous materials. The effect is caused by temperature changes due to mechanical strains. In vibrating structures, temperature gradients arise in adjacent tension and compression areas. Depending on the vibration frequency, they result in heat flows, leading to increased entropy and the irreversible transformation of mechanical energy into thermal energy.
The central objective of this thesis is the development of efficient simulation methods to incorporate thermoelastic damping in finite element analyses based on modal superposition. The thermoelastic loss factor is derived from the structure's mechanical mode shapes and eigenfrequencies. In subsequent analyses that are performed in the time and frequency domain, it is applied as modal damping.
Two approaches are developed to determine the thermoelastic loss in thin-walled plate structures, as well as three-dimensional solid structures. The realistic representation of the dissipation effects is verified by comparing the simulation results with experimentally determined data. Therefore, an experimental setup is developed to measure material damping, excluding other sources of energy dissipation.
The three-dimensional solid approach is based on the determination of the generated entropy and therefore the generated heat per vibration cycle, which is a measure for thermoelastic loss in relation to the total strain energy. For thin plate structures, the amount of bending energy in a modal deformation is calculated and summarized in the so-called Modal Bending Factor (MBF). The highest amount of thermoelastic loss occurs in the state of pure bending. Therefore, the MBF enables a quantitative classification of the mode shapes concerning the thermoelastic damping potential.
The results of the developed simulations are in good agreement with the experimental results and are appropriate to predict thermoelastic loss factors. Both approaches are based on modal superposition with the advantage of a high computational efficiency. Overall, the modeling of thermoelastic damping represents an important component in a comprehensive damping model, which is necessary to perform realistic simulations of vibration processes.
Although it is impractical to avert subsequent natural disasters, advances in simulation science and seismological studies make it possible to lessen the catastrophic damage. There currently exists in many urban areas a large number of structures, which are prone to damage by earthquakes. These were constructed without the guidance of a national seismic code, either before it existed or before it was enforced. For instance, in Istanbul, Turkey, as a high seismic area, around 90% of buildings are substandard, which can be generalized into other earthquakeprone regions in Turkey. The reliability of this building stock resulting from earthquake-induced collapse is currently uncertain. Nonetheless, it is also not feasible to perform a detailed seismic vulnerability analysis on each building as a solution to the scenario, as it will be too complicated and expensive. This indicates the necessity of a reliable, rapid, and computationally easy method for seismic vulnerability assessment, commonly known as Rapid Visual Screening (RVS). In RVS methodology, an observational survey of buildings is performed, and according to the data collected during the visual inspection, a structural score is calculated without performing any structural calculations to determine the expected damage of a building and whether the building needs detailed assessment. Although this method might save time and resources due to the subjective/qualitative judgments of experts who performed the inspection, the evaluation process is dominated by vagueness and uncertainties, where the vagueness can be handled adequately through the fuzzy set theory but do not cover all sort of uncertainties due to its crisp membership functions. In this study, a novel method of rapid visual hazard safety assessment of buildings against earthquake is introduced in which an interval type-2 fuzzy logic system (IT2FLS) is used to cover uncertainties. In addition, the proposed method provides the possibility to evaluate the earthquake risk of the building by considering factors related to the building importance and exposure. A smartphone app prototype of the method has been introduced. For validation of the proposed method, two case studies have been selected, and the result of the analysis presents the robust efficiency of the proposed method.
Modern cryptography has become an often ubiquitous but essential part of our daily lives. Protocols for secure authentication and encryption protect our communication with various digital services, from private messaging, online shopping, to bank transactions or exchanging sensitive information. Those high-level protocols can naturally be only as secure as the authentication or encryption schemes underneath. Moreover, on a more detailed level, those schemes can also at best inherit the security of their underlying primitives. While widespread standards in modern symmetric-key cryptography, such as the Advanced Encryption Standard (AES), have shown to resist analysis until now, closer analysis and design of related primitives can deepen our understanding.
The present thesis consists of two parts that portray six contributions: The first part considers block-cipher cryptanalysis of the round-reduced AES, the AES-based tweakable block cipher Kiasu-BC, and TNT. The second part studies the design, analysis, and implementation of provably secure authenticated encryption schemes.
In general, cryptanalysis aims at finding distinguishable properties in the output distribution. Block ciphers are a core primitive of symmetric-key cryptography which are useful for the construction of various higher-level schemes, ranging from authentication, encryption, authenticated encryption up to integrity protection. Therefore, their analysis is crucial to secure cryptographic schemes at their lowest level. With rare exceptions, block-cipher cryptanalysis employs a systematic strategy of investigating known attack techniques. Modern proposals are expected to be evaluated against these techniques. The considerable effort for evaluation, however, demands efforts not only from the designers but also from external sources.
The Advanced Encryption Standard (AES) is one of the most widespread block ciphers nowadays. Therefore, it is naturally an interesting target for further analysis. Tweakable block ciphers augment the usual inputs of a secret key and a public plaintext by an additional public input called tweak. Among various proposals through the previous decade, this thesis identifies Kiasu-BC as a noteworthy attempt to construct a tweakable block cipher that is very close to the AES. Hence, its analysis intertwines closely with that of the AES and illustrates the impact of the tweak on its security best. Moreover, it revisits a generic tweakable block cipher Tweak-and-Tweak (TNT) and its instantiation based on the round-reduced AES.
The first part investigates the security of the AES against several forms of differential cryptanalysis, developing distinguishers on four to six (out of ten) rounds of AES. For Kiasu-BC, it exploits the additional freedom in the tweak to develop two forms of differential-based attacks: rectangles and impossible differentials. The results on Kiasu-BC consider an additional round compared to attacks on the (untweaked) AES. The authors of TNT had provided an initial security analysis that still left a gap between provable guarantees and attacks. Our analysis conducts a considerable step towards closing this gap. For TNT-AES - an instantiation of TNT built upon the AES round function - this thesis further shows how to transform our distinguisher into a key-recovery attack.
Many applications require the simultaneous authentication and encryption of transmitted data. Authenticated encryption (AE) schemes provide both properties. Modern AE schemes usually demand a unique public input called nonce that must not repeat. Though, this requirement cannot always be guaranteed in practice. As part of a remedy, misuse-resistant and robust AE tries to reduce the impact of occasional misuses. However, robust AE considers not only the potential reuse of nonces. Common authenticated encryption also demanded that the entire ciphertext would have to be buffered until the authentication tag has been successfully verified. In practice, this approach is difficult to ensure since the setting may lack the resources for buffering the messages. Moreover, robustness guarantees in the case of misuse are valuable features.
The second part of this thesis proposes three authenticated encryption schemes: RIV, SIV-x, and DCT. RIV is robust against nonce misuse and the release of unverified plaintexts. Both SIV-x and DCT provide high security independent from nonce repetitions. As the core under SIV-x, this thesis revisits the proof of a highly secure parallel MAC, PMAC-x, revises its details, and proposes SIV-x as a highly secure authenticated encryption scheme. Finally, DCT is a generic approach to have n-bit secure deterministic AE but without the need of expanding the ciphertext-tag string by more than n bits more than the plaintext.
From its first part, this thesis aims to extend the understanding of the (1) cryptanalysis of round-reduced AES, as well as the understanding of (2) AES-like tweakable block ciphers. From its second part, it demonstrates how to simply extend known approaches for (3) robust nonce-based as well as (4) highly secure deterministic authenticated encryption.
Multi-user virtual reality systems enable collocated as well as distributed users to perform collaborative activities in immersive virtual environments. A common activity in this context is to move from one location to the next as a group to explore the environment together. The simplest solution to realize these multi-user navigation processes is to provide each participant with a technique for individual navigation. However, this approach entails some potentially undesirable consequences such as the execution of a similar navigation sequence by each participant, a regular need for coordination within the group, and, related to this, the risk of losing each other during the navigation process.
To overcome these issues, this thesis performs research on group navigation techniques that move group members together through a virtual environment. The presented work was guided by four overarching research questions that address the quality requirements for group navigation techniques, the differences between collocated and distributed settings, the scalability of group navigation, and the suitability of individual and group navigation for various scenarios. This thesis approaches these questions by introducing a general conceptual framework as well as the specification of central requirements for the design of group navigation techniques. The design, implementation, and evaluation of corresponding group navigation techniques demonstrate the applicability of the proposed framework.
As a first step, this thesis presents ideas for the extension of the short-range teleportation metaphor, also termed jumping, for multiple users. It derives general quality requirements for the comprehensibility of the group jumping process and introduces a corresponding technique for two collocated users. The results of two user studies indicate that sickness symptoms are not affected by user roles during group jumping and confirm improved planning accuracy for the navigator, increased spatial awareness for the passenger, and reduced cognitive load for both user roles.
Next, this thesis explores the design space of group navigation techniques in distributed virtual environments. It presents a conceptual framework to systematize the design decisions for group navigation techniques based on Tuckman's model of small-group development and introduces the idea of virtual formation adjustments as part of the navigation process. A quantitative user study demonstrates that the corresponding extension of Multi-Ray Jumping for distributed dyads leads to more efficient travel sequences and reduced workload. The results of a qualitative expert review confirm these findings and provide further insights regarding the complementarity of individual and group navigation in distributed virtual environments.
Then, this thesis investigates the navigation of larger groups of distributed users in the context of guided museum tours and establishes three central requirements for (scalable) group navigation techniques. These should foster the awareness of ongoing navigation activities as well as facilitate the predictability of their consequences for all group members (Comprehensibility), assist the group with avoiding collisions in the virtual environment (Obstacle Avoidance), and support placing the group in a meaningful spatial formation for the joint observation and discussion of objects (View Optimization). The work suggests a new technique to address these requirements and reports on its evaluation in an initial usability study with groups of five to ten (partially simulated) users. The results indicate easy learnability for navigators and high comprehensibility for passengers. Moreover, they also provide valuable insights for the development of group navigation techniques for even larger groups.
Finally, this thesis embeds the previous contributions in a comprehensive literature overview and emphasizes the need to study larger, more heterogeneous, and more diverse group compositions including the related social factors that affect group dynamics.
In summary, the four major research contributions of this thesis are as follows:
- the framing of group navigation as a specific instance of Tuckman's model of small-group development
- the derivation of central requirements for effective group navigation techniques beyond common quality factors known from single-user navigation
- the introduction of virtual formation adjustments during group navigation and their integration into concrete group navigation techniques
- evidence that appropriate pre-travel information and virtual formation adjustments lead to more efficient travel sequences for groups and lower workloads for both navigators and passengers
Overall, the research of this thesis confirms that group navigation techniques are a valuable addition to the portfolio of interaction techniques in multi-user virtual reality systems. The conceptual framework, the derived quality requirements, and the development of novel group navigation techniques provide effective guidance for application developers and inform future research in this area.
Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia
(2021)
This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that.
However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes.
Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings.
By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors’ as an opportunity for corruption.
In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects’ value chain. These propositions are made in reliance on BIM’s present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM’s synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies.
Encapsulation-based self-healing concrete has received a lot of attention nowadays in civil engineering field. These capsules are embedded in the cementitious matrix during concrete mixing. When the cracks appear, the embedded capsules which are placed along the path of incoming crack are fractured and then release of healing agents in the vicinity of damage. The materials of capsules need to be designed in a way that they should be able to break with small deformation, so the internal fluid can be released to seal the crack. This study focuses on computational modeling of fracture in encapsulation-based selfhealing concrete. The numerical model of 2D and 3D with randomly packed aggreates and capsules have been developed to analyze fracture mechanism that plays a significant role in the fracture probability of capsules and consequently the self-healing process. The capsules are assumed to be made of Poly Methyl Methacrylate (PMMA) and the potential cracks are represented by pre-inserted cohesive elements with tension and shear softening laws along the element boundaries of the mortar matrix, aggregates, capsules, and at the interfaces between these phases. The effects of volume fraction, core-wall thickness ratio, and mismatch fracture properties of capsules on the load carrying capacity of self-healing concrete and fracture probability of the capsules are investigated. The output of this study will become valuable tool to assist not only the experimentalists but also the manufacturers in designing an appropriate capsule material for self-healing concrete.
Die vorliegende Arbeit richtet sich an Ingenieur*innen und Wissenschaftler*innen der technischen Gebäudeausrüstung. Sie greift einen sich abzeichnenden Änderungsbedarf in der Umwelt- und Nachhaltigkeitsbewertung von Gebäuden und wärmetechnischen Anlagen auf. Der aktuell genutzte nicht erneuerbare Primärenergiebedarf wird insbesondere hinsichtlich künftiger politischer Klima- und Umweltschutzziele als alleinige Bewertungsgröße nicht ausreichend sein. Die mit dieser Arbeit vorgestellte Ökoeffizienzbewertungsmethode kann als geeignetes Instrument zur Lösung der Probleme beitragen. Sie ermöglicht systematische, ganzheitliche Bewertungen und reproduzierbare Vergleiche wärmetechnischer Anlagen bezüglich ihrer ökologischen und ökonomischen Nachhaltigkeit. Die wesentlichsten Neuentwicklungen sind die spezifische Umweltleistung, in Erweiterung zum genutzten Primärenergiefaktor, und der Ökoeffizienzindikator UWI.
Cultural Heritage on Mobile Devices: Building Guidelines for UNESCO World Heritage Sites' Apps
(2021)
Technological improvements and access provide a fertile scenario for creating and developing mobile applications (apps). This scenario results in a myriad of Apps providing information regarding touristic destinations, including those with a cultural profile, such as those dedicated to UNESCO World Heritage Sites (WHS). However, not all of the Apps have the same efficiency. In order to have a successful app, its development must consider usability aspects and features aligned with reliable content. Despite the guidelines for mobile usability being broadly available, they are generic, and none of them concentrates specifically into cultural heritage places, especially on those placed in an open-air scenario. This research aims to fulfil this literature gap and discusses how to adequate and develop specific guidelines for a better outdoor WHS experience. It uses an empirical approach applied to an open-air WHS city: Weimar and its Bauhaus and Classical Weimar sites. In order to build a new set of guidelines applied for open-air WHS, this research used a systematic approach to compare literature-based guidelines to industry-based ones (based on affordances), extracted from the available Apps dedicated to WHS set in Germany. The instructions compiled from both sources have been comparatively tested by using two built prototypes from the distinctive guidelines, creating a set of recommendations collecting the best approach from both sources, plus suggesting new ones the evaluation.
Knapp 30.000 Windenergieanlagen zwischen Nordsee und Alpen lassen unübersehbar erkennen, dass sich unser Energiesystem in einer umfassenden Transformation befindet. Allenthalben erfährt diese Entwicklung eine breite und kontroverse Rezeption und auch in der Denkmalpflege werden Windenergieanlagen aufgrund ihrer mitunter erheblichen Auswirkungen auf die Landschaft noch überwiegend als Störung wahrgenommen. Diese Arbeit nimmt dagegen die historische Entwicklung in den Blick und plädiert dafür, Windenergieanlagen als bedeutendes Kulturerbe zu verstehen. Angesichts des Voranschreitens der Energiewende wird angenommen, dass gerade älteren Modellen als baulichen Zeugnissen umfangreicher energiepolitischer Veränderungen seit den 1970er Jahren eine hohe Bedeutung zugeschrieben werden kann. Daher besteht das Ziel darin, Windenergieanlagen herauszuarbeiten, welche als hervorragende Zeugnisse der Entwicklung der Windenergienutzung in Deutschland zu bewerten sind.
Zur Annäherung werden diese zunächst als Untersuchungsgegenstand typologisch abgegrenzt. Eine wesentliche Besonderheit von Windenergieanlagen besteht darin, dass sie im Verhältnis zur eigentlichen Flächenversiegelung durch ihre vertikale Struktur erhebliche visuelle Auswirkungen auf die Landschaft haben. Anschließend wird die Entwicklung der Windenergienutzung seit den 1970er Jahren genauer betrachtet, welche insgesamt nicht linear verlief und von vielen Konflikten gekennzeichnet ist. Diese muss im Kontext eines wachsenden Umweltbewusstseins verstanden werden, das umfangreiche energiepolitische Veränderungen zur Folge hatte. Auf dieser Grundlage werden schließlich in einer denkmalkundlichen Reihenuntersuchung Windenergieanlagen herausgearbeitet, welche in hervorragender Weise von der Entwicklung zeugen. Die Auswahl bleibt allerdings mit sechs Objekten im Verhältnis zum Gesamtbestand von knapp 30.000 Anlagen relativ beschränkt, weil das auf die Abgrenzung von Besonderheiten ausgelegte etablierte Denkmalverständnis bei einem zeitlich so dichten Bestand gleichartiger Bauwerke an eine Grenze kommt.
Abschließend werden mögliche Erhaltungsperspektiven sowie denkmaltheoretische und -praktische Schlussfolgerungen diskutiert. Dabei ist unbedingt ein Erhalt am Ursprungsstandort anzustreben, wobei im Einzelfall entschieden werden muss, ob Belange des Funktions- oder Substanzerhaltes höher zu gewichten sind. Die skizzierten Auswahlprobleme regen darüber hinaus zur Diskussion zusätzlicher denkbarer Bewertungskategorien an, wobei sich insbesondere die gesellschaftliche Wahrnehmung und ökologische Werte aufdrängen. Zudem kann für die stärkere Berücksichtigung von Funktionszusammenhängen bei der Betrachtung technischer Infrastruktur in der Denkmalpflege plädiert werden. Insgesamt führt die denkmalkundliche Auseinandersetzung mit Windenergieanlagen damit weit über die Herausarbeitung einzelner Objekte hinaus und macht eindrücklich auf aktuelle Herausforderungen der Denkmalpflege und darüber hinaus aufmerksam.
In the last two decades, Peridynamics (PD) attracts much attention in the field of fracture mechanics. One key feature of PD is the nonlocality, which is quite different from the ideas in conventional methods such as FEM and meshless method. However, conventional PD suffers from problems such as constant horizon, explicit algorithm, hourglass mode. In this thesis, by examining the nonlocality with scrutiny, we proposed several new concepts such as dual-horizon (DH) in PD, dual-support (DS) in smoothed particle hydrodynamics (SPH), nonlocal operators and operator energy functional. The conventional PD (SPH) is incorporated in the DH-PD (DS-SPH), which can adopt an inhomogeneous discretization and inhomogeneous support domains. The DH-PD (DS-SPH) can be viewed as some fundamental improvement on the conventional PD (SPH). Dual formulation of PD and SPH allows h-adaptivity while satisfying the conservations of linear momentum, angular momentum and energy. By developing the concept of nonlocality further, we introduced the nonlocal operator method as a generalization of DH-PD. Combined with energy functional of various physical models, the nonlocal forms based on dual-support concept are derived. In addition, the variation of the energy functional allows implicit formulation of the nonlocal theory. At last, we developed the higher order nonlocal operator method which is capable of solving higher order partial differential equations on arbitrary domain in higher dimensional space. Since the concepts are developed gradually, we described our findings chronologically.
In chapter 2, we developed a DH-PD formulation that includes varying horizon sizes and solves the "ghost force" issue. The concept of dual-horizon considers the unbalanced interactions between the particles with different horizon sizes. The present formulation fulfills both the balances of linear momentum and angular momentum exactly with arbitrary particle discretization. All three peridynamic formulations, namely bond based, ordinary state based and non-ordinary state based peridynamics can be implemented within the DH-PD framework. A simple adaptive refinement procedure (h-adaptivity) is proposed reducing the computational cost. Both two- and three- dimensional examples including the Kalthoff-Winkler experiment and plate with branching cracks are tested to demonstrate the capability of the method.
In chapter 3, a nonlocal operator method (NOM) based on the variational principle is proposed for the solution of waveguide problem in computational electromagnetic field. Common differential operators as well as the variational forms are defined within the context of nonlocal operators. The present nonlocal formulation allows the assembling of the tangent stiffness matrix with ease, which is necessary for the eigenvalue analysis of the waveguide problem. The present formulation is applied to solve 1D Schrodinger equation, 2D electrostatic problem and the differential electromagnetic vector wave equations based on electric fields.
In chapter 4, a general nonlocal operator method is proposed which is applicable for solving partial differential equations (PDEs) of mechanical problems. The nonlocal operator can be regarded as the integral form, ``equivalent'' to the differential form in the sense of a nonlocal interaction model. The variation of a nonlocal operator plays an equivalent role as the derivatives of the shape functions in the meshless methods or those of the finite element method. Based on the variational principle, the residual and the tangent stiffness matrix can be obtained with ease. The nonlocal operator method is enhanced here also with an operator energy functional to satisfy the linear consistency of the field. A highlight of the present method is the functional derived based on the nonlocal operator can convert the construction of residual and stiffness matrix into a series of matrix multiplications using the predefined nonlocal operators. The nonlocal strong forms of different functionals can be obtained easily via the concept of support and dual-support. Several numerical examples of different types of PDEs are presented.
In chapter 5, we extended the NOM to higher order scheme by using a higher order Taylor series expansion of the unknown field. Such a higher order scheme improves the original NOM in chapter 3 and chapter 4, which can only achieve one-order convergence. The higher order NOM obtains all partial derivatives with specified maximal order simultaneously without resorting to shape functions. The functional based on the nonlocal operators converts the construction of residual and stiffness matrix into a series of matrix multiplication on the nonlocal operator matrix. Several numerical examples solved by strong form or weak form are presented to show the capabilities of this method.
In chapter 6, the NOM proposed as a particle-based method in chapter 3,4,5, has difficulty in imposing accurately the boundary conditions of various orders. In this paper, we converted the particle-based NOM into a scheme with interpolation property. The new scheme describes partial derivatives of various orders at a point by the nodes in the support and takes advantage of the background mesh for numerical integration. The boundary conditions are enforced via the modified variational principle. The particle-based NOM can be viewed a special case of NOM with interpolation property when nodal integration is used. The scheme based on numerical integration greatly improves the stability of the method, as a consequence, the operator energy functional in particle-based NOM is not required. We demonstrated the capabilities of current method by solving the gradient solid problems and comparing the numerical results with the available exact solutions.
In chapter 7, we derived the DS-SPH in solid within the framework of variational principle. The tangent stiffness matrix of SPH can be obtained with ease, and can be served as the basis for the present implicit SPH. We proposed an hourglass energy functional, which allows the direct derivation of hourglass force and hourglass tangent stiffness matrix. The dual-support is {involved} in all derivations based on variational principles and is automatically satisfied in the assembling of stiffness matrix. The implementation of stiffness matrix comprises with two steps, the nodal assembly based on deformation gradient and global assembly on all nodes. Several numerical examples are presented to validate the method.
Für die Verminderung der betonspezifischen CO2-Emissionen wird ein verstärkter Einsatz klinkerreduzierter Zemente bzw. Betone angestrebt. Die Reduzierung des Klinkergehaltes darf jedoch nicht zu einer lebensdauerrelevanten Beeinträchtigung der Betondauerhaftigkeit führen. In diesem Zusammenhang stellt der Frost-Tausalz-Widerstand eine kritische Größe dar, da er bei höheren Klinkersubstitutionsraten häufig negativ beeinflusst wird. Erschwerend kommt hinzu, dass für klinkerreduzierte Betone nur ein unzureichender Erfahrungsschatz vorliegt. Ein hoher Frost-Tausalz-Widerstand kann daher nicht ausschließlich anhand deskriptiver Vorgaben gewährleistet werden. Demgemäß sollte perspektivisch auch für frost-tausalzbeanspruchte Bauteile eine performancebasierte Lebensdauerbetrachtung erfolgen.
Eine unverzichtbare Grundlage für das Erreichen dieser Ziele ist ein Verständnis für die Schadensvorgänge beim Frost-Tausalz-Angriff. Der Forschungsstand ist jedoch geprägt von widersprüchlichen Schadenstheorien. Somit wurde als Zielstellung für diese Arbeit abgeleitet, die existierenden Schadenstheorien unter Berücksichtigung des aktuellen Wissensstandes zu bewerten und mit eigenen Untersuchungen zu prüfen und einzuordnen. Die Sichtung des Forschungsstandes zeigte, dass nur zwei Theorien das Potential haben, den Frost-Tausalz-Angriff umfassend abzubilden – die Glue Spall Theorie und die Cryogenic Suction Theorie.
Die Glue Spall Theorie führt die Entstehung von Abwitterungen auf die mechanische Schädigung der Betonoberfläche durch eine anhaftende Eisschicht zurück. Dabei sollen nur bei moderaten Tausalzkonzentrationen in der einwirkenden Lösung kritische Spannungszustände in der Eisschicht auftreten, die eine Schädigung der Betonoberfläche hervorrufen können. In dieser Arbeit konnte jedoch nachgewiesen werden, dass starke Abwitterungen auch bei Tausalz¬konzentrationen auftreten, bei denen eine mechanische Schädigung des Betons durch das Eis auszuschließen ist. Damit wurde die fehlende Eignung der Glue Spall Theorie aufgezeigt.
Die Cryogenic Suction Theorie fußt auf den eutektischen Eigenschaften von Tausalz-lösungen, die im gefrorenen Zustand immer als Mischung auf festem Wassereis und flüssiger, hochkonzentrierter Salzlösung bestehen, solange ihre Eutektikumstemperatur nicht unter¬schritten wird. Die flüssige Phase im salzhaltigen Eis stellt für gefrorenen Beton ein bisher nicht berücksichtigtes Flüssigkeitsreservoir dar, welches trotz der hohen Salzkonzentration die Eisbildung in der Betonrandzone verstärken und so die Entstehung von Abwitterungen verursachen soll. In dieser Arbeit wurde bestätigt, dass die Eisbildung im Zementstein beim Gefrieren in hochkonzentrierter Tausalzlösung tatsächlich verstärkt wird. Das Ausmaß der zusätzlichen Eisbildung wurde dabei auch von der Fähigkeit des Zementsteins zur Bindung von Chloridionen aus der Tausalzlösung beeinflusst.
Zusammenfassend wurde festgestellt, dass die Cryogenic Suction Theorie eine gute Beschreibung des Frost-Tausalz-Angriffes darstellt, aber um weitere Aspekte ergänzt werden muss. Die Berücksichtigung der intensiven Sättigung von Beton durch den Prozess der Mikroeislinsenpumpe stellt hier die wichtigste Erweiterung dar. Basierend auf dieser Überlegung wurde eine kombinierte Schadenstheorie aufgestellt. Wichtige Annahmen dieser Theorie konnten experimentell bestätigt werden. Im Ergebnis wurde so die Grundlage für ein tiefergehendes Verständnis des Frost-Tausalz-Angriffes geschaffen. Zudem wurde ein neuer Ansatz identifiziert, um die (potentielle) Verringerung des Frost-Tausalz-Widerstandes klinkerreduzierter Betone zu erklären.
Die Auseinandersetzung mit der Digitalisierung ist in den letzten Jahren in den Medien, auf Konferenzen und in Ausschüssen der Bau- und Immobilienbranche angekommen. Während manche Bereiche Neuerungen hervorbringen und einige Akteure als Pioniere zu bezeichnen sind, weisen andere Themen noch Defizite hinsichtlich der digitalen Transformation auf. Zu dieser Kategorie kann auch das Baugenehmigungsverfahren gezählt werden. Unabhängig davon, wie Architekten und Ingenieure in den Planungsbüros auf innovative Methoden setzen, bleiben die Bauvorlagen bisher zuhauf in Papierform oder werden nach der elektronischen Einreichung in der Behörde ausgedruckt. Vorhandene Ressourcen, beispielsweise in Form eines Bauwerksinformationsmodells, die Unterstützung bei der Baugenehmigungsfeststellung bieten können, werden nicht ausgeschöpft. Um mit digitalen Werkzeugen eine Entscheidungshilfe für die Baugenehmigungsbehörden zu erarbeiten, ist es notwendig, den Ist-Zustand zu verstehen und Gegebenheiten zu hinterfragen, bevor eine Gesamtautomatisierung der innerbehördlichen Vorgänge als alleinige Lösung zu verfolgen ist.
Mit einer inhaltlich-organisatorischen Betrachtung der relevanten Bereiche, die Einfluss auf die Baugenehmigungsfeststellung nehmen, wird eine Optimierung des Baugenehmigungsverfahrens in den
Behörden angestrebt. Es werden die komplexen Bereiche, wie die Gesetzeslage, der Einsatz von Technologie aber auch die subjektiven Handlungsalternativen, ermittelt und strukturiert. Mit der Entwicklung eines Modells zur Feststellung der Baugenehmigungsfähigkeit wird sowohl ein Verständnis für Einflussfaktoren vermittelt als auch eine Transparenzsteigerung für alle Beteiligten geschaffen.
Neben einer internationalen Literaturrecherche diente eine empirische Studie als Untersuchungsmethode. Die empirische Studie wurde in Form von qualitativen Experteninterviews durchgeführt, um den Ist-Zustand im Bereich der Baugenehmigungsverfahren festzustellen. Das erhobene Datenmaterial wurde aufbereitet und anschließend einer softwaregestützten Inhaltsanalyse unterzogen. Die Ergebnisse wurden in Kombination mit den Erkenntnissen der Literaturrecherche in verschiedenen Analysen als Modellgrundlage aufgearbeitet.
Ergebnis der Untersuchung stellt ein Entscheidungsmodell dar, welches eine Lücke zwischen den gegenwärtigen
Abläufen in den Baubehörden und einer Gesamtautomatisierung der Baugenehmigungsprüfung schließt. Die prozessorientierte Strukturierung entscheidungsrelevanter Sachverhalte im Modell ermöglicht eine Unterstützung bei der Baugenehmigungsfeststellung für Prüfer und Antragsteller. Das theoretische Modell konnte in Form einer Webanwendung in die Praxis übertragen werden.
In den letzten Jahrzehnten unterlag der Straßenbetriebsdienst tiefgreifenden Veränderungen. Diese Veränderungen schließt auch die betriebliche Steuerungsphilosophie ein, um eine planungsrationale und ökonomische Gestaltung des Straßenbetriebsdienstes zu unterstützen. Dabei erfolgt eine verbindliche Vorgabe der Leistungsinhalte und -umfänge und ermöglicht eine Budgetierung für das vorgesehene Jahresarbeitsprogramm.
Ziel der Untersuchung ist die Entwicklung eines Modells für die Ermittlung von leistungsbezogenen Musterjahresganglinien zur Unterstützung der Jahresarbeitsplanung. Dafür lagen für jede Leistung des Leistungsbereiches „Grünpflege“ jeweils 260 einzelne Jahresganglinien vor.
Im Ergebnis der Untersuchung wird die leistungsbezogene Musterjahresganglinie in vier Schritten ermittelt. Im ersten Schritt erfolgt die Prüfung der Datenqualität; im zweiten Schritt eine Korrelationsanalyse; im dritten Schritt die fachliche Überprüfung der Leistungsausprägung und im vierten Schritt die Ermittlung der leistungsbezogenen Musterjahresganglinie aus den verbliebenen leistungsbezogenen Jahresganglinien.
Das Kernthema dieser Arbeit ist die Beschäftigung mit den Folgen des Uranbergbaus in dem Gebiet um die ehemalige Abbauregion der Wismut SAG/SDAG in Ronneburg (Ostthüringen). Dieses Thema wird unter historischen, sozialen, kulturanthropologischen und künstlerischen Aspekten betrachtet und in den Zusammenhang mit den weltweiten Voraussetzungen der Nuklearindustrie und Auswirkungen des Uranbergbaus und seiner Folgen gestellt. Die Arbeit legt dar, wie eine Uranbergbaufolgelandschaft entsteht und welches Wissen ist für ein angemessenes Verständnis des Phänomens wichtig ist. Es wird untersucht, ob Kunst bezüglich der Uranbergbaufolgelandschaft einen relevanten Beitrag leisten kann bzw. in welcher Form dies versucht wurde, bzw. stellte Arbeiten vor, die verwandete Themen bearbeitet haben. In Kombination dieser beiden Hauptaspekte geht die Arbeit der Frage nach, welche Faktoren die Uranbergbaufolgelandschaft prägen und ob es sinnvolle Beteiligungsfelder für künstlerisches Forschen oder Handeln gibt sowie welche Bedingungen hierfür erfüllt werdenmüssten. Die Kernthese der Arbeit ist, dass künstlerische Arbeiten im Themenfeld des Uranbergbaus unter bestimmten Bedingungen relevante Beiträge leisten können.
El presente trabajo se inscribe en el campo de los estudios urbanos y plantea como ejes estructurantes la intersección entre las políticas públicas, el barrio y las prácticas del habitar (de Certeau, 1996, 1999; Gravano, 2003) en el marco de las transformaciones del espacio urbano en los barrios pericentrales, también denominados tradicionales de la ciudad de Córdoba, particularmente lo acontecido en Barrio Güemes, durante el periodo 2010-2016.
El propósito del abordaje se inscribe en conocer y realizar aportes generalizables a la comprensión de las prácticas del habitar como unidad de análisis. En ese marco, el problema de investigación se formula en el siguiente interrogante: ¿cómo se modifican las prácticas del habitar en el marco de las transformaciones urbanas, en un modo de producción capitalista? Se entiende a las prácticas como acciones elementales de las “artes de hacer” que las personas ordinarias ponen en marcha en su vida cotidiana: para circular, cocinar, trabajar, vincularse. También, a través de las mismas resignifican los espacios, les otorgan una valoración (positiva o negativa), se identifican como parte de la identidad y a su vez se reconocen lugares de (des)encuentro y vías de circulación.
Para su abordaje se toma como unidad de estudio el caso de barrio Güemes. El recorte espacial (o físico) del trabajo empírico está localizado en la ciudad de Córdoba, y se sitúa en la periferia del área central. Esta localización permite comprender el surgimiento de las primeras expansiones urbanas como consecuencia del crecimiento demográfico y cómo estas, se transformaron en los primeros barrios. El recorte temporal se encuentra delimitado entre los años 2000 y 2016, respaldado intencionalmente por dos acontecimientos significativos: el censo de población (2001) y la celebración del Bicentenario de la Independencia en Argentina.
Los cambios materializados en ciertos espacios urbanos, tanto en ciudades latinoamericanas (Buenos Aires, Salvador de Bahía en Brasil, México Distrito Federal, etc.) como en otras partes del mundo (New Orleans en los Estados Unidos, el distrito de Kreuzberg- Friedrichshain en Berlín, el puerto de Hamburgo en Alemania, etc.) demuestran cómo estos espacios se van transformado acorde al modo de reproducción capitalista. Pues, se trataba de espacios que en algún momento cumplieron funciones económicas-sociales jerarquizadas y luego por la dinámica misma del capitalismo, la sobreacumulación, dejan de ser rentables y pasan a ser espacios “obsoletos”. En ese sentido, la omisión de acciones públicas y/o privadas, la desatención y el crecimiento de situaciones sociales conflictivas (delitos, inseguridad, degradación) en estos espacios, funciona como argumento para que los gobiernos locales comiencen a planear el futuro y modernizarlos.
De esta manera, se plantean políticas urbanas con el objetivo de impulsar acciones de renovación o rehabilitación para dinamizar económicamente determinados sectores. Dos elementos discursivos aparecen como posibilitadores del proceso de renovación urbana: el turismo y el patrimonio. En ese sentido, bajo la recuperación patrimonial de ciertos lugares se dinamizan los territorios, por lo que el turismo se vuelve una herramienta económica que produce un excedente de plusvalía. La puesta en valor de bienes tangibles e intangibles atrae la afluencia de visitantes y, a la vez, es rentable económicamente. Ahora bien, muchas veces los proyectos tienen en cuenta las variables morfológicas y físicas, dejando en un segundo plano el impacto en el espacio próximo y las relaciones entre los habitantes con su territorio. Actualmente los espacios elegidos por los municipios para la intervención pública y/o privada son los barrios, puesto que son espacios cercanos al centro y considerados estratégicos. Por lo general, el argumento es la necesidad de rehabilitar/renovar zonas poco aprovechadas o degradadas con el objetivo de mejorar la calidad de vida de la población y dinamizar el sector (Brites, 2017; Guevara, 2012). Desde los 2000 el barrio Güemes asiste a un proceso de crecimiento inusitado. La cantidad de artesanos se disparó y variedad de productos ofrecidos, emergieron los comercios que forman parte de la oferta comercial, gastronómica y cultural del barrio. Hace varios años, presenta nuevos actores económicos que se pueden observar en la apertura de galerías comerciales; ubicadas sobre el eje de las calles Belgrano, Achával Rodríguez, Fructuoso Rivera y la creciente aparición de edificaciones alrededor de la feria artesanal histórica; con la venta y exposición de piezas del arte plástico, gastronomía, negocios de diseñadores cordobeses y hasta la inclusión de la idea del del “desarrollo sustentable” en los techos de las galerías.
La modificación del corpus normativo, la aparición de edificación en altura y el boom económico tuvieron como resultado, la valorización del suelo urbano, la retroalimentación en el espacio con el emplazamiento de nuevas actividades comerciales y servicios culturales. A la par, en el espacio barrial se presentan nuevos residentes con otros hábitos y prácticas que ponen en disputa los modos de habitar en el espacio.
A riesgo de simplificar, estas transformaciones fueron producto de los cambios políticoideológicos, de los modelos e instrumentos de gestión urbana puestos en juego en los diversos momentos históricos y de las propias prácticas sociales y culturales de los habitantes. De esta manera, se centrará la mirada analítica en las transformaciones de las prácticas del habitar de los pobladores de los Barrios Güemes, en el marco de la metamorfosis del espacio urbano (atravesado por tendencias de mediatización y mercantilización de la experiencia) que conjugó un proceso de intersección y asociatividad entre políticas públicas y expansión inmobiliaria.
In recent years, the discussion of digitalization has arrived in the media, at conferences, and in committees of the construction and real estate industry. While some areas are producing innovations and some contributors can be described as pioneers, other topics still show deficits with regard to digital transformation. The building permit process can also be counted in this category. Regardless of how architects and engineers in planning offices rely on innovative methods, building documents have so far remained in paper form in too many cases, or are printed out after electronic submission to the authority. Existing resources – for example in the form of a building information model, which could provide support in the building permit process – are not being taken advantage of. In order to use digital tools to support decision-making by the building permit authorities, it is necessary to understand the current situation and to question conditions before pursuing the overall automation of internal authority processes as the sole solution.
With a substantive-organizational consideration of the relevant areas that influence building permit determination, an improvement of the building permit procedure within authorities is proposed. Complex areas – such as legal situations, the use of technology, as well as the subjective alternative action – are determined and structured. With the development of a model for the determination of building permitability, both an understanding of influencing factors is conveyed and an increase in transparency for all parties involved is created.
In addition to an international literature review, an empirical study served as the research method. The empirical study was conducted in the form of qualitative expert interviews in order to determine the current state in the field of building permit procedures. The collected data material was processed and subsequently subjected to a software-supported content analysis. The results were processed, in combination with findings from the literature review, in various analyses to form the basis for a proposed model.
The result of the study is a decision model that closes the gap between the current processes within the building authorities and an overall automation of the building permit review process. The model offers support to examiners and applicants in determining building permit eligibility, through its process-oriented structuring of decision-relevant facts. The theoretical model could be transferred into practice in the form of a web application.
Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid−structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size.
Überwachungspraktiken und –technologien sind in der heutigen Welt omnipräsent und wohl nicht mehr wegzudenken. Ob CCTV-Systeme, Biometrie oder Data Mining – unsere Gesellschaft befindet sich in einem ständigen Überwachungsmodus, der sich weit über einen begrenzten Raum oder zeitlichen Rahmen hinausstreckt. Überwacht wird überall: privat, am Arbeitsplatz oder im Cyberspace, und alles: Interaktionen, Äußerungen, Verhalten. Es werden Unmengen von Daten gesammelt, strukturiert, kombiniert, gekauft und verkauft.
Dieser Modus stellt mehr als eine bloße Neuauflage des Bentham-Foucaultschen Panoptikons dar: der aktuelle Überwachungsmodus, die informationelle Asymmetrie als ihren tragenden Pfeiler beibehaltend, dient nicht nur der Disziplinierung, sondern viel mehr der Kontrolle, die nicht primär negativ-sanktionierend, sondern positiv-leistungssteigernd wirkt: es ist nicht das Ziel, die Individuen zu bestrafen und ein bestimmtes Verhalten zu verbieten, sondern sie durch Belohnung, Interaktion und spielerische Elemente dazu zu bringen, sich auf die gewünschte Art zu verhalten und im Endeffekt sich selbst zu überwachen. Die Kontrolle wird auf diese Weise zum zentralen Schauplatz der Machtausübung, die sich über das Beobachten, Speichern, Auswerten und Sortieren vollzieht. Diese Prozesse hinterlassen keinen Frei- oder Spielraum für Ambiguität; sie verwirklichen die Diktatur der klaren Kante, der Klassifizierung und Kategorisierung ohne Schattierungen. Die Macht selbst befindet sich in einem kontinuierlichen Fluss, sie ist ubiquitär, dennoch schwer lokalisierbar. Sie fungiert nicht mehr unter dem Signum einer pseudosakralen zentralen Instanz, sondern wird durch diverse Akteure und Assemblages kolportiert. Die durch sie implizierten Praktiken der Selbstkontrolle, kulturgeschichtlich ebenfalls religiös oder zumindest philosophisch konnotiert, sind die neuen Rituale des Sehens und Gesehen-Werdens.
Im Zeitalter der elektronischen Datentechnologien gibt es diverse Agenten der Überwachung. Vom besonderen Interesse sind dabei die Wearables, weil sie intim, affektiv und haptisch arbeiten und so, über das Sehen und Gesehen-Werden hinaus, das Berühren und Berührt-Werden und somit die Neuregulierung von Nähe und Distanz ins Spiel bringen. Sie schreiben sich zwar in eine Vermessungstradition eins, die ihre Ursprünge mindestens im 19. Jahrhundert hat, unterscheiden sich aber von dieser in ihrer Intensität und Sinnlichkeit.
The computational analysis of argumentation strategies is substantial for many downstream applications. It is required for nearly all kinds of text synthesis, writing assistance, and dialogue-management tools. While various tasks have been tackled in the area of computational argumentation, such as argumentation mining and quality assessment, the task of the computational analysis of argumentation strategies in texts has so far been overlooked.
This thesis principally approaches the analysis of the strategies manifested in the persuasive argumentative discourses that aim for persuasion as well as in the deliberative argumentative discourses that aim for consensus. To this end, the thesis presents a novel view of argumentation strategies for the above two goals. Based on this view, new models for pragmatic and stylistic argument attributes are proposed, new methods for the identification of the modelled attributes have been developed, and a new set of strategy principles in texts according to the identified attributes is presented and explored.
Overall, the thesis contributes to the theory, data, method, and evaluation aspects of the analysis of argumentation strategies. The models, methods, and principles developed and explored in this thesis can be regarded as essential for promoting the applications mentioned above, among others.
“How to understand the interaction between urban space and social processes” is a significant question in urban studies. To answer that, the city needs to be recognized as both a physical and a social entity and urban theory and practice need to connect these (Hillier 2007). The present research aims to re-examine the complex correlation between spatial and social inequality manifestations in the city of Tehran regarding the concept of segregation.
It observes the causes and consequences of segregation in Tehran and provides an insight into both concepts of socio-spatial segregation and neighborhood effects and creates a link between them. First, I argue when, where, and for whom spatial locations affect the chances of social networks in Tehran. Then, I discuss how neighborhood effects can emerge via social network mechanisms and thus affect the perceptions of residents in the neighborhoods.
Die interdisziplinäre Dissertationsschrift lässt sich im Horizont internationaler Forschungen zu Denkmalwerten, neuer Ansätze in der Kultur- und Wissensvermittlung rund um Baudenkmale sowie künstlerisch- ethnographischem Forschen an und mit Denkmalen verorten.
Der erste Teil der Arbeit widmet sich Denkmalen und der Denkmalpflege im Kontext künstlerischer und sozialwissenschaftlicher Allianzen. Ausgangspunkt ist die Feststellung, dass die Denkmalpflege zwar sehr vieles über Denkmale weiß, aber kaum etwas über deren Rezeption beim breiten Publikum. Im Mittelpunkt steht die Frage, wie hier Praktiken der bildenden Kunst und Arbeitsweisen der Kulturanthropologie die Disziplin der Denkmalpflege bereichern können, oder sogar müssen.
Den zweiten Teil bildet eine empirische Studie, in der die populäre Wahrnehmung von Denkmalen qualitativ erforscht wird. Das Schloss und Rittergut Bedheim im südlichen ländlichen Thüringen dient dabei als konkreter Untersuchungsort. Reaktionen von Besucherinnen und Besuchern werden mit Hilfe von drei künstlerischen Eingriffen angeregt und diese dann ethnographisch-offen dokumentiert und ausgewertet.
Auf dieser Basis werden Zugänge zum Denkmal ermittelt. Während die meisten BesucherInnen das Denkmal als „Arbeit“ wahrnehmen, geraten einige ins „Träumen“ oder „Erinnern“, man „genießt“ das Ensemble als authentische und ästhetische Ressource, oder findet Zugang über das spontane „Erklären“ baukonstruktiver oder baulicher Situationen. Für andere bedeutet der Besuch die „Teilhabe“ an einem Prozess. Schloss Bedheim wird als Ort stetiger Veränderung geschätzt. In der Wahrnehmung der BesucherInnen verquicken sich Aspekte des Bewunderns mit solchen des Abgrenzens. Die eigene Alltagswelt und das eigene Zuhause bilden hierbei Bezugspunkte. Schloss Bedheim wird auf diese Weise zum Imaginationsraum, zur Energietankstelle und zur gern besuchten Problemwelt.
Die Ergebnisse der Arbeit liegen in zwei Erkenntnisfeldern: Auf einer methodischen Ebene zeigt sie, wie in der Denkmalpflege vertiefte Fachlichkeit mit einer tatsächlichen Kontaktaufnahme mit dem Publikum verbunden werden kann und damit soziale Gefüge an Baudenkmalen qualitativ ermittelt werden können. Ebenso wird deutlich, dass künstlerische Eingriffe Auslöser von Gesprächen sind, als Kontaktflächen zur Alltagswelt dienen und so zu einer vielfältigen Auseinandersetzung mit Denkmalen führen.
Auf einer inhaltlichen Ebene liefert die Arbeit Erkenntnisse zu Wahrnehmungsweisen von Denkmalen. Neben den erwähnten Zugängen, wird die Existenz und Bedeutung einer regional vernetzten Wahrnehmung von Denkmalen aufgedeckt. Des Weiteren zeigen die Ergebnisse, dass das Öffnen von Baudenkmalen als und im Prozess ungenutzte Potentiale birgt und es wird angeregt, dies in zukünftigen denkmalpflegerischen Konzepten eine größere Rolle spielen zu lassen. Die Vision eines „Kompendiums der Zugänge“ wird entwickelt, mit dessen Hilfe sich ein enormes Wissen über Rollen und Bedeutungen die Baudenkmale in unserer Gesellschaft spielen, sammeln ließe.
This thesis examines urban partition in Nicosia, the capital of Cyprus, and how its changing roles and shifting perceptions in a post-conflict setting reflect power relations, and their constant renegotiation. Nicosia, the capital of Cyprus, was officially divided in 1974 in the aftermath of an eighteen-year-long conflict between the island’s Turkish- and Greek-Cypriot communities. As a result, a heavily militarized Buffer Zone, established as an emergency measure against perpetuation of intercommunal violence, has been cutting through its historic centre ever since.
This thesis departs from a genuine interest in the material and ideational dimensions of urban partition. How is it constructed, not merely in physical terms but in the minds of the societies affected by conflict? How is it established in official and everyday discourses? What kinds of mechanisms have been developed to maintain it, and make an inseparable part of the urban experience? Moreover, taking into account the consensus in relevant literature pertaining to the imperative for its removal, this thesis is inquiring into the relevance of peace agreements to overcoming urban partition. For this purpose, it also looks at narratives and practices that have attempted to contest it.
The examples examined in this thesis offer pregnant analytical moments to understand Nicosia’s Buffer Zone as a dynamic social construct, accommodating multiple visions of and for the city. Its space ‘in-between’ facilitates encounters between various actors, accommodates new meanings, socio-spatial practices and diverse imaginaries. In this sense, urban partition is explored in this thesis as a phenomenon that transcends scales as well as temporalities, entwining past, present, and future.
This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level.
This thesis presents the advances and applications of phase field modeling in fracture analysis. In this approach, the sharp crack surface topology in a solid is approximated by a diffusive crack zone governed by a scalar auxiliary variable. The uniqueness of phase field modeling is that the crack paths are automatically determined as part of the solution and no interface tracking is required. The damage parameter varies continuously over the domain. But this flexibility comes with associated difficulties: (1) a very fine spatial discretization is required to represent sharp local gradients correctly; (2) fine discretization results in high computational cost; (3) computation of higher-order derivatives for improved convergence rates and (4) curse of dimensionality in conventional numerical integration techniques. As a consequence, the practical applicability of phase field models is severely limited.
The research presented in this thesis addresses the difficulties of the conventional numerical integration techniques for phase field modeling in quasi-static brittle fracture analysis. The first method relies on polynomial splines over hierarchical T-meshes (PHT-splines) in the framework of isogeometric analysis (IGA). An adaptive h-refinement scheme is developed based on the variational energy formulation of phase field modeling. The fourth-order phase field model provides increased regularity in the exact solution of the phase field equation and improved convergence rates for numerical solutions on a coarser discretization, compared to the second-order model. However, second-order derivatives of the phase field are required in the fourth-order model. Hence, at least a minimum of C1 continuous basis functions are essential, which is achieved using hierarchical cubic B-splines in IGA. PHT-splines enable the refinement to remain local at singularities and high gradients, consequently reducing the computational cost greatly. Unfortunately, when modeling complex geometries, multiple parameter spaces (patches) are joined together to describe the physical domain and there is typically a loss of continuity at the patch boundaries. This decrease of smoothness is dictated by the geometry description, where C0 parameterizations are normally used to deal with kinks and corners in the domain. Hence, the application of the fourth-order model is severely restricted. To overcome the high computational cost for the second-order model, we develop a dual-mesh adaptive h-refinement approach. This approach uses a coarser discretization for the elastic field and a finer discretization for the phase field. Independent refinement strategies have been used for each field.
The next contribution is based on physics informed deep neural networks. The network is trained based on the minimization of the variational energy of the system described by general non-linear partial differential equations while respecting any given law of physics, hence the name physics informed neural network (PINN). The developed approach needs only a set of points to define the geometry, contrary to the conventional mesh-based discretization techniques. The concept of `transfer learning' is integrated with the developed PINN approach to improve the computational efficiency of the network at each displacement step. This approach allows a numerically stable crack growth even with larger displacement steps. An adaptive h-refinement scheme based on the generation of more quadrature points in the damage zone is developed in this framework. For all the developed methods, displacement-controlled loading is considered. The accuracy and the efficiency of both methods are studied numerically showing that the developed methods are powerful and computationally efficient tools for accurately predicting fractures.
In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible.
Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution.
Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance.
Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis.
Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements.
Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction.
For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem.
Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field.
From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element.
As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section.
Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.
Natural Urban Resilience: Understanding general urban resilience through Addis Ababa’s inner city
(2021)
This dissertation describes the urban actors and spatial practices that contribute to natural urban resilience in Addis Ababa’s inner city. Natural urban resilience is a non-strategical and bottom-up, everyday form of general urban resilience – an urban system’s ability to maintain its essential characteristics under any change. This study gains significance by exposing conceptual gaps in the current un-derstanding of general urban resilience and highlighting its unconvincing applicability to African cities. This study attains further relevance by highlighting the danger of the ongoing large-scale redevelopment of the inner city. The inner city has naturally formed, and its urban memory, spaces, and social cohesion contribute to its primarily low-income population’s resilience. This thesis argues that the inner city’s demolition poses an incalculable risk of maladaptation to future stresses and shocks for Addis Ababa. The city needs a balanced urban discourse that highlights the inner city’s qualities and suggests feasible urban transformation measures. “Natural Urban Resilience” contributes an empirical study to the debate by identifying those aspects of the inner city that contribute to general resilience and identifies feasible action areas. This study develops a qualitative research design for a single case study in Addis Ababa. The data is obtained through expert interviews, interviews with resi-dents, and the analysis of street scene photos, which are abstracted using Grounded Theory. That way, this thesis provides first-time knowledge about who and what generates urban resilience in the inner city of Addis Ababa and how. Furthermore, the study complements existing theories on general urban resilience. It provides a detailed understanding of the change mechanisms in resilience, of which it identifies four: adaptation, upgrading, mitigation, and resistance. It also adapts the adaptive cycle, a widely used concept in resilience thinking, conceptually for urban environments. The study concludes that the inner city’s continued redevelopment poses an incalculable threat to the entire city. Therefore, “Natural urban resilience” recommends carefully weighing any intervention in the inner city to promote Addis Ababa’s overall resilience. This dissertation proposes a pattern language for natural urban resilience to support these efforts and to translate the model of natural urban resilience into practice.
Housing estates were fundamentally conceived upon state socialist utopia ideas to provide standard housing for citizens. While former state socialist housing estates have been extensively researched in the field of architecture, urban and sociology studies, there is still a gap in identifying how production processes affect morphological changes during the post-socialist era. This thesis compares the processes in the production of the largest housing estates of Marzahn in GDR and Petržalka in Czechoslovakia from 1970 to 1989 through contextual analysis of primary and secondary sources, which include visual maps, diagrams from professional architecture and planning journals, government documents and textbooks, as well as academic journals, books and newspaper articles. Then it discusses how these processes inadvertently created conducive conditions affecting their development in the market economy after 1989. It then interprets the results through application of Actor-Network Theory and Historical Institutionalism, while conceptualising them through David Harvey’s dialectical utopianism theory. Harvey (2000) delineates two types of utopia, one of spatial form and one of process. The former refers to materialised ideals in physical forms whereas the latter refers to the ongoing process of spatializing. The thesis aims to show how the production of Marzahn in GDR was more path dependent on policies established in 1950s and 1960s whereas Petržalka was a product of new Czechoslovakian policies in 1970s, changing aspects of the urban planning process, a manifestation of a more emphatic technocratic thinking on a wider scale. This ultimately influences the trajectories of development after 1989, showing more effects in Petržalka.
Transformation of the Environment: Influence of “Urban Reagents.” German and Russian Case Studies
(2021)
An urban regeneration manifests itself through urban objects operating as change agents. The en-tailed diverse effects on the surroundings demonstrate experimental origin - an experiment as a preplanned but unpredictable method. An understanding of influences and features of urban ob-jects requires scrutiny due to a high potential of the elements to force an alteration and reactions. This dissertation explores the transformation of the milieu and mechanisms of this transformation.
This dissertation investigates the interactions between urban form, allocation of activities, and pedestrian movement in the context of urban planning. The ability to assess the long-term impact of urban planning decisions on what people do and how they get there is of central importance, with various disciplines addressing this topic. This study focuses on approaches proposed by urban morphologists, urban economists, and transportation planners, each aiming the attention at a different part of the form-activity-movement interaction. Even though there is no doubt about the advantages of these highly focused approaches, it remains unclear what is the cost of ignoring the effect of some interactions while considering others. The general aim of this dissertation is to empirically test the validity of the individual models and quantify the impact of this isolationist approach on their precision and bias.
For this purpose, we propose a joined form-activity-movement interaction model and conduct an empirical study in Weimar, Germany. We estimate how the urban form and activities affect movement as well as how movement and urban form affect activities. By estimating these effects in isolation and simultaneously, we assess the bias of the individual models.
On the one hand, the empirical study results confirm the significance of all interactions suggested by the individual models. On the other hand, we were able to show that when these interactions are estimated in isolation, the resulting predictions are biased. To conclude, we do not question the knowledge brought by transportation planners, urban morphologists, and urban economists. However, we argue that it might be of little use on its own.
We see the relevance of this study as being twofold. On the one hand, we proposed a novel methodological framework for the simultaneous estimation of the form-activity-movement interactions. On the other hand, we provide empirical evidence about the strengths and limitations of current approaches.
Die Arbeit leistet einen wissenschaftlichen Beitrag zur Erforschung der Einsatzmöglichkeiten eines Immobilienportfoliomanagements für öffentliche museale Schlösserverwaltungen in Deutschland. Insbesondere wird ein für deren Organisation spezifisches Modell zur Investitionssteuerung herausgearbeitet und dessen Anwendbarkeit in der Praxis mit Experten diskutiert.
The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universität Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework.
This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio‐political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951.
The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?'
Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked.
Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies.
The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.
Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe für die Verwendung als Energieträger, Nahrungsmittel oder als Ausgangsstoff für Pharmazeutika. Dass die Quantität und Qualität der in natürlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und küstennahen Aquakulturen in Europa gegenwärtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabhängige Algenproduktion zu ermöglichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt.
Im Ergebnis wird für den gegenwärtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz für die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz für die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erhöht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf jährlich 460.869€ für Ulva intestinalis, 4.010€ für Fucus vesiculosus und 16.913€ für Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gezüchteten Grünalge Ulva intestinalis anzustreben und die Produktivität der Zuchtanlage im Sinne des Optimalszenarios zu steigern.
This study permits a reliability analysis to solve the mechanical behaviour issues existing in the current structural design of fabric structures. Purely predictive material models are highly desirable to facilitate an optimized design scheme and to significantly reduce time and cost at the design stage, such as experimental characterization.
The present study examined the role of three major tasks; a) single-objective optimization, b) sensitivity analyses and c) multi-objective optimization on proposed weave structures for woven fabric composites. For single-objective optimization task, the first goal is to optimize the elastic properties of proposed complex weave structure under unit cells basis based on periodic boundary conditions.
We predict the geometric characteristics towards skewness of woven fabric composites via Evolutionary Algorithm (EA) and a parametric study. We also demonstrate the effect of complex weave structures on the fray tendency in woven fabric composites via tightness evaluation. We utilize a procedure which does not require a numerical averaging process for evaluating the elastic properties of woven fabric composites. The fray tendency and skewness of woven fabrics depends upon the behaviour of the floats which is related to the factor of weave. Results of this study may suggest a broader view for further research into the effects of complex weave structures or may provide an alternative to the fray and skewness problems of current weave structure in woven fabric composites.
A comprehensive study is developed on the complex weave structure model which adopts the dry woven fabric of the most potential pattern in singleobjective optimization incorporating the uncertainties parameters of woven fabric composites. The comprehensive study covers the regression-based and variance-based sensitivity analyses. The second task goal is to introduce the fabric uncertainties parameters and elaborate how they can be incorporated into finite element models on macroscopic material parameters such as elastic modulus and shear modulus of dry woven fabric subjected to uni-axial and biaxial deformations. Significant correlations in the study, would indicate the need for a thorough investigation of woven fabric composites under uncertainties parameters. The study describes here could serve as an alternative to identify effective material properties without prolonged time consumption and expensive experimental tests.
The last part focuses on a hierarchical stochastic multi-scale optimization approach (fine-scale and coarse-scale optimizations) under geometrical uncertainties parameters for hybrid composites considering complex weave structure. The fine-scale optimization is to determine the best lamina pattern that maximizes its macroscopic elastic properties, conducted by EA under the following uncertain mesoscopic parameters: yarn spacing, yarn height, yarn width and misalignment of yarn angle. The coarse-scale optimization has been carried out to optimize the stacking sequences of symmetric hybrid laminated composite plate with uncertain mesoscopic parameters by employing the Ant Colony Algorithm (ACO). The objective functions of the coarse-scale optimization are to minimize the cost (C) and weight (W) of the hybrid laminated composite plate considering the fundamental frequency and the buckling load factor as the design constraints.
Based on the uncertainty criteria of the design parameters, the appropriate variation required for the structural design standards can be evaluated using the reliability tool, and then an optimized design decision in consideration of cost can be subsequently determined.
Space is a social product and a social producer. The main aim of this thesis is to reveal ‘the process of totalitarian city making in Pyongyang’, especially in the light of the interaction between the power and urban space.
The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot.
After the 1945 independence, Kim’s regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens.
After entry to the market, to keep Kim’s controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives’ gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang.
This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society.
Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low.
Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs.
Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite.
It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.
Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanität soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verfügbarkeit sowie der äußerst geringe rohstoffbedingte CO2-Ausstoß während der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Varietät der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die Übertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivität auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung für die Anwendung im Beton herauszuarbeiten.
In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus für Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivität der Brennprodukte als auch umgekehrt die Höhe der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von röntgenamorph und hochreaktiv zu glasig und reaktionsträge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanität festgestellt werden. Dies bestätigte sich anschließend in Parameterversuchen, bei denen die Einflüsse von Rohstoffqualität, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivitätsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualitäten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die für Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorgängen abhängige Schadmechanismen unterdrückt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bemängeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die für Puzzolane stark ausgeprägte Carbonatisierungsneigung.
Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bezüglich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln können. So kann selbst ein stark verunreinigter Illit-Ton die Qualität von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Präsens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanitäten bis hin zur hochreaktiven Metakaolin-Qualität. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsfähigkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen für eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend können Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten.
Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity
(2020)
Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges.
Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension
of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality.
In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity.
The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips.
Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles’ strength can be related with the target gust amplitudes a priori.
The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind–bridge interaction and suggest appropriate modeling strategies for an enhanced design.
Diese Dissertation beschäftigt sich mit Kunstwerken, die das alltägliche Ding in den Blick nehmen. Nährboden dieser Kunstform sind die soziokulturellen Entwicklungen des 20. Jahrhunderts, mit denen wesentliche Veränderungen hinsichtlich des Verhältnisses von Mensch und Ding einhergingen.
Daraus resultierte eine allgemeine künstlerische Zuwendung zu den Dingen und eine einzigartige Kulmination aus verschiedenartigen Auseinandersetzungen mit ihnen als kunstfähige Gegenstände, über die sich die neue Dingwelt erschlossen wurde und deren Kunstwerke einen Spiegel dieser Entwicklungen darstellen.
Die Dissertation stellt ebenfalls die Dinge selbst in den Fokus. Vier Aspekte von Dingen (Materialität, Funktionalität, Repräsentationalität und Relationalität) werden gesondert ins Auge gefasst und in den theoretischen Diskurs des 20. Jahrhunderts eingeordnet, um sie als Teil der gelebten Realität besser zu verstehen, von der sich der ästhetische Blick nicht trennen lässt. Anhand der künstlerischen Positionen von Robert Rauschenberg, Christo und Jeanne-Claude, Daniel Spoerri und Arman sowie Claes Oldenburg werden die verschiedenen Aspekte der Dinge näher betrachtet und analysiert, wie diese speziell in den Kunstwerken thematisiert werden und welche Relevanz sie für deren Rezeptionserfahrung haben.
Die Korrelation dieser beiden Ebenen - die Dinge als konstitutiver Bestandteil im sozialen Raum und die Dinge als Elemente in Kunstwerken -, die im Fokus der vorliegenden Untersuchung steht, ermöglicht es, die künstlerische Zuwendung zu den Dingen in den 1960er-Jahren neu einzuordnen. Darüber hinaus wird dadurch ein differenziertes Bild von der Kunst dieser Zeit sowie den Dingen in der Kunst im Allgemeinen gezeichnet.
In einer systematischen Interpretation von Vilém Flussers Werk schlägt die Arbeit vor, Flussers Ansatz als einen medienphilosophischen zu verstehen, insofern er das „wie“ der medienphilosophischen Fragestellung in den Mittelpunkt rückt. Medien werden nicht erst dann zu einem wesentlichen Bestandteil von Flussers Philosophie, wenn er sie explizit zum Gegenstand seiner Untersuchungen der gegenwärtigen Kultur und Gesellschaft oder historischer Rückblicke macht; Denken vollzieht sich immer in Medien oder medialen Praktiken, es wird nicht nur von ihnen (mit) geprägt – ohne Medien gäbe es kein Denken und umgekehrt verändert sich Philosophie mit den (jeweils) neuen Medien. Ausgehend von Begriffen oder eher Denkfiguren, die neben dem „was“ des jeweils verhandelten Themas auch das „wie“ der Reflexion selbst adressieren, wird der „Umbruch in der Struktur des Denkens“ zugleich als Beschreibung von Medienumbrüchen verstanden – mit dem Fluchtpunkt des Sprungs in das Universum der Komputation – und als Vollzug der gegenwärtigen Veränderung der „Methode des Denkens“. Flussers (Ver)Suche einer Reflexion, die nicht mehr durch das Medium Schrift strukturiert ist, sondern sowohl alten Medien wie dem Bild – bzw. Praktiken des Abbildens, Darstellens, Einbildens usw. – als auch neuen Medien – dem Komputieren – Geltung verschafft, laufen auf eine widersprüchliche Diagnose des neuen Universums der Komputation (anders: der technischen Bilder) hinaus : eine kybermetisch inspirierte Vision der frei modellierbaren Wirklichkeit(en) einerseits und die Dystopie einer Welt, in der Apparaten Denken, Wahrnehmen und Handeln beherrschen andererseits. Die Arbeit zeigt auf, wie Flusser zu dieser Aporie der Medienreflexion – die weit über Flussers Werk hinaus virulent bleibt – gelangt und wie sie, ausgehend von seiner Figur der Geste, im Sinne einer performativen Medienreflexion gelöst werden könnte.
This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created.
To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process.
The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents’ lives?
The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience.
Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants.