56.45 Baustoffkunde
Refine
Document Type
- Doctoral Thesis (20)
- Article (6)
- Conference Proceeding (2)
- Preprint (1)
Institute
- F. A. Finger-Institut für Baustoffkunde (FIB) (8)
- Professur Allgemeine Baustoffkunde (7)
- Professur Bauchemie und Polymere Werkstoffe (5)
- Professur Werkstoffe des Bauens (5)
- bauhaus.institut für experimentelle Architektur (2)
- Graduiertenkolleg 1462 (1)
- Institut für Strukturmechanik (ISM) (1)
- Professur Bauklimatik (1)
- Professur Bauphysik (1)
Keywords
- Beton (6)
- Mikrostruktur (6)
- Gips (5)
- Hydratation (5)
- Zement (4)
- Alkali-Kieselsäure-Reaktion (3)
- Mikroskopie (3)
- microstructure (3)
- Alkalisulfate (2)
- Betonzusatzmittel (2)
- Bildanalyse (2)
- Calciumsulfat (2)
- Dauerhaftigkeit (2)
- Fließmittel (2)
- Kunststoffadditiv (2)
- Kunststoffmörtel (2)
- Mauerwerk (2)
- Mehrphasensystem (2)
- Papierware (2)
- Platte (2)
- Sandwichbauteil (2)
- Tomographie (2)
- Tragendes Teil (2)
- Ultraschall (2)
- Verflüssigung (2)
- Wellpappe (2)
- cement (2)
- Abbinderegler (1)
- Adaptable design (1)
- Alkali-Carbonat-Reaktion (1)
- Alkali-Kieselsäure-Gel (1)
- Alkali-Kieselsäure-Reaktion; Fahrbahndecken; Flugbetriebsflächen; äußere Alkalizufuhr; Enteisungsmittel; Natriumchlorid; Alkaliacetate; Alkaliformiate; AKR-Performance-Prüfung; FIB-Klimawechsellagerung (1)
- Alkalilösliche Kieselsäure (1)
- Alkalisulfat (1)
- Alterung (1)
- Alterungsbeständigkeit (1)
- Alterungsdihydrat (1)
- Anhydrit III (1)
- Architecture (1)
- Architektur (1)
- Aridisierung (1)
- Bauchemie (1)
- Baudenkmal (1)
- Baustein (1)
- Bauteil (1)
- Beschleuniger (1)
- Betonverflüssiger (1)
- Betonzuschlag (1)
- C-S-H Phasen (1)
- C-S-H phases (1)
- Calciumsulfat-Halbhydrat (1)
- Calciumsulfatbindemittel (1)
- Corrugated cardboard sandwich (1)
- Creep (1)
- Denkmalpflege (1)
- Dissipation (1)
- Druckfestigkeit (1)
- Elastizitätsmodul (1)
- Enteisungsanlage (1)
- Epoxide (1)
- Epoxidharz (1)
- Erhärtungsprüfung (1)
- Ermüdung (1)
- Faltung (1)
- Festigkeit (1)
- Festmörtel (1)
- Fließverhalten (1)
- Folded components (1)
- Frischmörtel (1)
- Frost-Tau-Widerstand (1)
- Frostbeständigkeit (1)
- Gefüge <Werkstoffkunde> (1)
- Gesteinskörnungen (1)
- Gips-Zement-Puzzolan-Bindemittel (1)
- Heilungseffekt (1)
- Hochfester Beton (1)
- Injektion (1)
- Instandsetzung (1)
- Interkristalline Korrosion (1)
- Interpartikuläre Wechselwirkungen (1)
- Inverse Gaschromatographie (1)
- Klimawechsellagerung (1)
- Klinker (1)
- Konservierung (1)
- Konstruktion (1)
- Kornzerfall (1)
- Kriechen (1)
- Kristallitgröße (1)
- Kunstharzmodifizierter Zementbeton (1)
- Langzeitverhalten (1)
- Langzeitverzögerer (1)
- Laser-Ultraschall (1)
- Lasertechnologie (1)
- Laufzeit (1)
- Leichtbau (1)
- Lettenkeupersandstein (1)
- Lower Keuper Sandstone (1)
- Lösungsanalytik (1)
- Mahlaggregat (1)
- Mahlung (1)
- Maschinelles Lernen (1)
- Materialverhalten (1)
- Mauermörtel (1)
- Microstructure (1)
- Middle Keuper Sandstone (1)
- Modellierung (1)
- Multiscale modeling (1)
- Multiskalenmodellierung (1)
- Mörtel (1)
- Naturstein (1)
- OA-Publikationsfonds2021 (1)
- OA-Publikationsfonds2023 (1)
- Oberflächenanalyse (1)
- Oberflächenporosität (1)
- Phosphonocarbonsäure (PBTC) (1)
- Polymer modification (1)
- Polymeradsorption (1)
- Polymere (1)
- Polymermodifizierung (1)
- Polymorphie (1)
- Porenlösung (1)
- Prüftechnik (1)
- Qualitätskontrolle (1)
- Quarz (1)
- Quelldruck (1)
- Quellen (1)
- Radar (1)
- Radar <Druckschrift> (1)
- Recycling (1)
- Restaurierung (1)
- Rietveld-Methode (1)
- Rissbildung (1)
- Schaum (1)
- Schilfsandstein (1)
- Schwinden (1)
- Schwindisotherme (1)
- Schwindmechanismus (1)
- Schwindreduktion (1)
- Sichtbeton (1)
- Sorptionsisotherme (1)
- Steinfestigung (1)
- Steinkonservierung (1)
- Stochastik (1)
- Stoffeigenschaft (1)
- Strukturbildung (1)
- Stuckgips (1)
- Suspensionsanalytik (1)
- Sustainable construction technology (1)
- Verarbeitungseigenschaft (1)
- Vertical roller mill (1)
- Wasserbeständigkeit (1)
- Wirkungsmechanismen (1)
- Young's modulus (1)
- Zementhydratation (1)
- Zementmahlung (1)
- Zementstein (1)
- Zerstörungsfreie Werkstoffprüfung (1)
- Zweischaliges Mauerwerk (1)
- aged hemihydrate plasters (1)
- aggregate (1)
- alkali silicate gels (1)
- alkali silicate reaction (1)
- alkali-carbonate reaction (1)
- alkali-silica reaction; pavements; external alkalis; deicer; sodium chloride; alkali acetates; alkali formates; ASR performance test; cyclic climate storage (1)
- alkali-silica-reaktion (1)
- amine hardener (1)
- bio-based (1)
- calcium sulfate hemihydrate (1)
- carboxymethylcellulose (1)
- climate storage (1)
- concrete (1)
- concrete admixture (1)
- construction chemicals (1)
- crack (1)
- crack mitigation (1)
- curing agent (1)
- cyclic load (1)
- degradation (1)
- durability (1)
- elastische Parameter (1)
- epoxy (1)
- fatigue (1)
- fluidity (1)
- freeze-thaw resistance (1)
- fresh mortar (1)
- gypsum (1)
- gypsum, metallurgical dust, multi-walled carbon nanotubes, water resistance, calcium hydrosilicates, X-ray analyze, microstructure. (1)
- gypsumcristalline (1)
- hardened mortar (1)
- high performance fine-grained concrete, rice husk ash, workability, compressive strength, splitting tensile strength, chloride penetration resistance (1)
- hybride Werkstoffe (1)
- hydration (1)
- hygro-mechanical stability (1)
- hygro-mechanische Instabilität (1)
- long-term retarder (1)
- microscopy (1)
- mortar (1)
- natural building stone (1)
- non-destructive (1)
- operative mechanisms (1)
- phosphonocarbon acid (PBTC) (1)
- polymorphe Unschärfemodellierung (1)
- pore solution (1)
- schwindreduzierendes Zusatzmittel (1)
- set regulator (1)
- shrinkage (1)
- shrinkage reducing admixtures (1)
- shrinkage reducing agents (1)
- shrinkage reduction (1)
- slow-late-aggregate (1)
- stone consolidation (1)
- stone decay (1)
- strain (1)
- strength (1)
- stress (1)
- superplasticizer (1)
- superplasticizers (1)
- swelling (1)
- transmitted light microscopy (1)
- vanillin (1)
- zerstörungsfrei (1)
- zyklische Beanspruchung (1)
- überstöchiometrisches Wasser (1)
The high resource demand of the building sector clearly indicates the need to search for alternative, renewable and energy-efficient materials. This work presents paper-laminated sandwich elements with a core of corrugated paperboard that can serve as architectural components with a load-bearing capacity after a linear folding process. Conventional methods either use paper tubes or glued layers of honeycomb panels. In contrast, the folded components are extremely lightweight, provide the material strength exactly where it is statically required and offer many possibilities for design variants. After removing stripes of the paper lamination, the sandwich can be folded in a linear way at this position. Without the resistance of the missing paper, the sandwich core can be easily compressed. The final angle of the folding correlates with the width of the removed paper stripe. As such, this angle can be described by a simple geometric equation. The geometrical basis for the production of folded sandwich elements was established and many profile types were generated such as triangular, square or rectangular shapes. The method allows the easy planning and fast production of components that can be used in the construction sector. A triangle profile was used to create a load-bearing frame as supporting structure for an experimental building. This first permanent building completely made of corrugated cardboard was evaluated in a two-year test to confirm the efficiency of the developed components. In addition to the frame shown in this paper, large-scale sandwich elements with a core of folded components can be used to fabricate lightweight ceilings and large-scale sandwich components. The method enables the efficient production of linearly folded cardboard elements which can replace normal wooden components like beams, pillars or frames and bring a fully recycled material in the context of architectural construction.
Der vorliegende Text beschreibt die intensive Erforschung von Wabenplatten aus Papierwerkstoffen, die durch Faltprozesse neue räumliche Zustände einnehmen können und somit ihr ursprüngliches Anwendungsspektrum erweitern. Die gezeigten Lösungsansätze bewegen sich dabei im Spannungsfeld von Architektur und Ingenieurbau, denn die gefalteten Bauteile sind nicht nur äußerst tragfähig sondern besitzen auch eine ästhetische Form. Die entwickelten Verfahren und Konstruktionen werden auf einem hohen architektonischen Niveau präsentiert und mit einfachen ingenieurtechnischen Methoden verifiziert. Zur Lösungsfindung werden geometrische Verfahren ebenso angewendet wie konstruktive Faustformeln und Recherchen aus Architektur und Forschung.
Der Fokus der Arbeit liegt auf der Untersuchung von Faltungen in Wabenplatten. Während der Auseinandersetzung mit der Thematik erschienen jedoch viele weitere Aspekte als sehr interessant und bearbeitungswürdig. Als theoretische Grundlage dieser Arbeit werden deshalb die geschichtliche Entwicklung und die gesellschaftliche Bedeutung von Papier und Papierwerkstoffen analysiert und deren Produktionsprozesse beleuchtet. Diese Vorgehensweise ermöglicht eine Einordnung des Potentials und der Bedeutung des Werkstoffs Papier. Der Kontext der Arbeit wird dadurch gestärkt und führt zu interessanten zukünftigen Forschungsansätzen.
Intensive Untersuchungen widmen sich der geometrischen Bestimmung von Faltungen in Wabenplatten aus Papierwerkstoffen sowie deren Manifestation als konstruktive Bauteile. Auch die statischen Eigenschaften der Elemente und ihr Konstruktionspotential werden erforscht und aufbereitet. Wichtige Impulse aus Forschung und Technik fließen in die Recherche der Arbeit ein und erlauben die Verortung der Ergebnisse im architektonischen Kontext. Versuchsreihen und Materialstudien an Prototypen belegen die Ergebnisse virtueller und rechnerischer Studien. Konzepte zur parametrischen Berechnung und Visualisierung der Forschungsergebnisse werden präsentiert und zeigen zukunftsfähige Planungshilfen für die Industrie auf. Etliche Testreihen zu unterschiedlichsten Abdichtungskonzepten führen zur Realisierung eines sehenswerten Experimentalbaus. Er erlaubt die dauerhafte Untersuchung der entwickelten Bauteile unter realistischen Bedingungen und bestätigt deren Leistungsfähigkeit. Dadurch wird nicht nur ein dauerhaftes Monitoring und eine Evaluierung der Leistungsdaten möglich sondern es wird auch der sichtbare Beweis erbracht, dass mit Papierwerkstoffen effiziente und hochwertige Architekturen zu realisieren sind, welche das enorme gestalterische Potential von gefalteten Wabenplatten ausnutzen.
Ziel der Arbeit war das Adsorptionsverhalten ausgewählter schutzkolloidstabilisierter Polymerpartikel mit variierender chemischer Basis im zementären System zu beschreiben und basierend auf den gewonnenen Erkenntnissen das Konkurrenzverhalten beim Angebot unterschiedlicher mineralischer Oberflächen zu klären.
Sowohl die Destabilisierung der Polymerpartikel im alkalischen Milieu, welche eine Voraussetzung für derartige Adsorptionsprozesse ist, als auch die Veränderung von Oberflächeneigenschaften verschiedener mineralischer Partikel durch Hydratations- und Ionenadsorptionsprozesse, wurden u. a. mit Hilfe elektrokinetischer Experimente erfasst. Die spektralphotometrische Erstellung von Adsorptionsisothermen ermöglichte zudem die Ermittlung der jeweiligen adsorbierten Polymermenge zu verschiedenen Zeitpunkten der frühen Hydratation. Weiterhin wurde die Polymeradsorption an Partikeln ausgewählter Zusatzstoffe in Abhängigkeit von der Ionenstärke der Flüssigphase beschrieben.
Rasterelektronenmikroskopische Untersuchungen cryo-präparierter polymermodifizierter Zementleimproben ermöglichten es außerdem deren Mikrostruktur im suspensiven Zustand zu visualisieren. Diese Aufnahmen, ebenso wie die Ergebnisse grundlegender hydratationskinetischer Untersuchungen wurden in Wechselbeziehung zu den Ergebnissen der Adsorptionsuntersuchungen gebracht.
Maßgelbliche intermolekulare und interpartikuläre Wechselwirkungen, infolge derer sich die Stabilitätsverhältnisse im Zementleim ändern und die Polymerpartikel adsorbieren sind im Wesentlichen die Desorption des Schutzkolloids von der Polymerpartikeloberfläche, die Ionisation funktioneller Gruppen der Polymerpartikel und der Schutzkolloidmakromoleküle im alkalischen Milieu und infolgedessen die Komplexbildung mit Ionen der Zementleimporenlösung. Die Auswirkungen dieser Vorgänge auf die Lösungs- und Fällungskinetik des Zementleimes wurden erfasst und mit der chemischen Zusammensetzung der polymeren Systeme korreliert.
The work has studied the structure and properties of gypsum compositions modified with the manmade modifier based on metallurgical dust and multi-walled carbon nanotubes. The results show that changing the structure of solid gypsum leads to the increase in bending and compressive strength by 70,5% and 138% correspondingly, the water resistance increasing and the softening factor reaching 0,85. Modifying gypsum composition with complex additive leads to the formation of amorphous structures based on calcium hydrosilicates on the surface of primary gypsum crystallohydrates that bond gypsum crystals and reduce the access of water.
Rice husk ash (RHA) is classified as a highly reactive pozzolan. It has a very high silica content similar to that of silica fume (SF). Using less-expensive and locally available RHA as a mineral admixture in concrete brings ample benefits to the costs, the technical properties of concrete as well as to the environment. An experimental study of the effect of RHA blending on workability, strength and durability of high performance fine-grained concrete (HPFGC) is presented. The results show that the addition of RHA to HPFGC improved significantly compressive strength, splitting tensile strength and chloride penetration resistance. Interestingly, the ratio of compressive strength to splitting tensile strength of HPFGC was lower than that of ordinary concrete, especially for the concrete made with 20 % RHA. Compressive strength and splitting tensile strength of HPFGC containing RHA was similar and slightly higher, respectively, than for HPFGC containing SF. Chloride penetration resistance of HPFGC containing 10–15 % RHA was comparable with that of HPFGC containing 10 % SF.
Das Hauptziel der Arbeit war es zu klären, ob alkalihaltige Enteisungsmittel eine Alkali-Kieselsäure-Reaktion (AKR) auslösen und/oder beschleunigen können und was die dabei ggf. zugrunde liegenden Mechanismen sind. Die Untersuchungen dazu ergaben, dass die auf Verkehrsflächen eingesetzten alkalihaltigen Enteisungsmittel auf Basis von Natriumchlorid (Fahrbahndecken) bzw. auf Basis der Alkaliacetate und -formiate (Flugbetriebsflächen) den Ablauf einer AKR in Betonen mit alkalireaktiven Gesteinskörnungen auslösen und mitunter stark beschleunigen können. Dabei nimmt die AKR-fördernde Wirkung der Enteisungsmittel in der Reihenfolge Natriumchlorid - Alkaliacetate - Alkaliformiate erheblich zu.
Es zeigte sich, dass im Fall der Alkaliacetate und -formiate nicht allein die Zufuhr von Alkalien von Bedeutung ist, sondern dass es außerdem zu einer Freisetzung von OH-Ionen aus dem Portlandit und folglich zu einem Anstieg des pH-Wertes in der Porenlösung kommt. Dadurch wird der Angriff auf alkalireaktives SiO2 in Gesteinskörnungen verstärkt und der Ablauf einer AKR beschleunigt. Unter äußerer NaCl-Zufuhr kommt es hingegen nicht zu einem Anstieg des pH-Wertes, was der Grund für die weniger stark AKR-fördernde Wirkung von NaCl ist. Von Bedeutung sind hier die zugeführten Na-Ionen und offenbar ein sich andeutender, direkter Einfluss von NaCl auf das SiO2-Löseverhalten. Sind pH-Wert und Na-Konzentration in der Porenlösung ausreichend hoch, wird sich thermodynamisch bedingt AKR-Gel bilden. Die Bildung von FRIEDEL’schem Salz ist dabei nur eine Begleiterscheinung, aber keine Voraussetzung für den Ablauf einer AKR unter äußerer NaCl-Zufuhr.
Es zeigte sich weiter, dass sich mit der FIB-Klimawechsellagerung als Performance-Prüfung das AKR-Schädigungspotential von Betonen für Fahrbahndecken und Flugbetriebsflächen zuverlässig beurteilen lässt. Die Vorteile der FIB-Klimawechsellagerung liegen in der Prüfung kompletter, projektspezifischer Betonzusammensetzungen unter Beachtung aller praxisrelevanten klimatischen Einwirkungen und vor allem in der Berücksichtigung einer äußeren Alkalizufuhr. Innerhalb von 36 Wochen kann das AKR-Schädigungspotential einer Betonzusammensetzung für eine Nutzungsdauer von 20-30 Jahren in der Praxis sicher beurteilt werden.
In der praktischen Anwendung werden den Calciumsulfatbindemitteln Kombinationen verschiedenster Zusätze beigegeben. Ein Verständnis für die Wirkungsweise der verschiedenen Zusätze wird folglich mit steigender Komplexität moderner Bindemittelrezepturen zunehmend wichtiger. In der vorliegenden Arbeit werden die Auswirkungen von Alkalisalzen und Fließmitteln auf die verschiedenen Phasen der Hydratation von Calciumsulfathalbhydrat systematisch analysiert und anschließend diskutiert.
Im ersten Teil der Arbeit wird gezeigt, dass Alkalisulfate und Alkalichloride die Hydratation von Calciumsulfathalbhydrat in unterschiedlicher Weise beeinflussen. Die Beschleunigungswirkung der gleichionigen Zusätzen K2SO4 und Na2SO4 wird sowohl durch eine verbesserte Keimbildung als auch durch einen Anstieg der Kristallwachstumsgeschwindigkeit verursacht. Während Alkalisulfate die Dihydratkeimbildung begünstigen, wird diese bei Zugabe von KCl und NaCl verzögert. Ein Beschleunigungseffekt setzt erst später in der Phase des Kristallwachstums ein. Die Wirkung der zugegebenen Ionen lässt sich entsprechend der Hofmeister-Serie einordnen.
Der zweite Teil der vorliegenden Arbeit präsentiert eine systematische Betrachtung der Wirkungsweise dreier Fließmittelgruppen im Calciumsulfatsystem (Polykondensat, Polycarboxylatether, Kammpolymer mit Phosphatgruppen). Untersuchungen zur Verflüssigungswirkung der Fließmittel zeigen, dass diese in der Reihenfolge Polykondensat < Polycarboxylatether < Kammpolymer mit Phosphatgruppen zunimmt. Eine direkte Korrelation zwischen Verflüssigungswirkung und Adsorptionsneigung besteht nicht. Neben den gewünschten Effekten weisen Fließmittel häufig auch eine Verzögerung der Hydratation des Bindemittels als unerwünschte Nebenwirkung auf. Ursächlich für diese fließmittelinduzierte Verzögerung ist eine Behinderung der Keimbildung und des Kristallwachstums. Untersuchungen zur Auflösung von Calciumsulfathalbhydrat zeigen eine Behinderung des Auflösungsprozesses in Anwesenheit der Fließmittel. Die Ergebnisse lassen eine partielle Belegung der Halbhydratoberflächen mit Fließmittelmolekülen vermuten. Die veränderte Morphologie der Dihydratkristalle verweist auf eine selektive Belegung der Dihydratoberflächen mit Fließmittelmolekülen.
Die Arbeit zeigt die wesentlichen Gründe auf, warum betahalbhydratreiche Niederbranntgipsbinder (industriell als Stuckgips bezeichnet) oft sehr unterschiedliche Eigenschaften aufweisen.
Der Anteil an Halbhydrat, welches aus dem stark hygroskopischen Anhydrit III (A III) durch die Reaktion mit Luftfeuchtigkeit entsteht, stellt einen erheblichen, bislang vollkommen unbeachteten Einfluss dar. Dieses Halbhydrat aus A III zeigt andere Oberflächeneigenschaften und ein Reaktionsverhalten, das von frisch gebranntem Betahalbhydrat abweicht.
Es zeigt sich, wie weitreichend der Einfluss physiko-chemischer Oberflächenprozesse wie Adsorption und Kondensation ist. Hierdurch wird nicht nur die Oberflächenenergie der Partikel abgebaut, sondern auch eine Verminderung der Hydratationswärme verursacht. Somit wirken sich physikalische Vorgänge thermodynamisch aus. Einwirkende und resultierende Parameter einer Alterung wirken wie folgt äußerst komplex zusammen:
Die dominierenden Bindemitteleigenschaften Abbindeverhalten und Wasseranspruch verändern sich durch eine Alterung sowohl aufgrund der Phasenumwandlungen als auch infolge der Veränderungen der Kristallite. Ebenso einflussreich ist die Veränderung der Oberflächencharakteristik. Die Auswirkung der Alterung auf die Reaktivität geht deutlich über den Abbau von Anhydrit III, die Dezimierung von abbindefähigem Material und die beschleunigende Wirkung von Alterungsdihydrat hinaus. Das Wachstum der Kristallite von Halbhydrat und die Verringerung der inneren Energie sowie die energetisch günstige spontane Beladung der Kristallgitterkanäle kleinster Anhydrit III-Kristallite mit dampfförmigem Wasser müssen als maßgebliche Ursachen für die Abnahme der Reaktivität infolge der Alterung herausgestellt werden. Die Abnahme der spezifischen Oberfläche und der Oberflächenenergie wirken sich außerdem auf den Lösungs- und den Hydratationsprozess aus. Der auf der Oberfläche von Anhydrit III kristallisierte Anhydrit II wirkt sich auch nach der Umwandlung von A III in Halbhydrat lösungshemmend aus. Infolge der alterungsbedingten Dihydratbildung, die bei anhaltender Feuchteeinwirkung einsetzt, wird diese Wirkung aufgehoben bzw. vermindert. Obgleich Dihydrat für seinen Beschleunigungseffekt bekannt ist, entfaltet Alterungsdihydrat infolge seiner besonderen Ausbildung innerhalb der wenige Moleküllagen umfassenden Kondenswasserschicht nur eine geringe keimbildende Wirkung.
Eine wesentliche Erkenntnis betrifft den Bindungscharakter des Überstöchiometrischen Wassers. Diesbezüglich ist eine rein physikalische Bindung nachweisbar. Das in der Arbeit als stärker adsorptiv gebunden bezeichnete Wasser kommt neben der Freien Feuchte ausschließlich bei Anwesenheit von Halbhydrat vor. Dieser Zusammenhang wird erstmalig hergestellt und mit Hilfe der kristallchemisch bedingten höheren Oberflächenenergie von Halbhydrat erklärt.
On the mechanisms of shrinkage reducing admixtures in self con-solidating mortars and concretes
(2010)
Self Consolidating Concrete – a dream has come true!(?) Self Consolidating Concrete (SCC) is mainly characterised by its special rheological properties. With-out any vibration this concrete can be placed and compacted under its own weight, without segrega-tion or bleeding. The use of such concrete can increase the productivity on construction sites and en-able the use of a higher degree of well distributed reinforcement for thin walled structural members. This new technology also reduces health risks since in contrast to the traditional handling of concrete, the emission of noise and vibration are substantially decreased. The specific mix design for self consolidating concretes was introduced around the 1980s in Japan. In comparison to normal vibrated concrete an increased paste volume enables a good distribution of aggregates within the paste matrix, minimising the influence of aggregates friction on the concrete flow property. The introduction of inert and/or pozzolanic additives as part of the paste provides the required excess paste volume without using disproportionally high amounts of plain cement. Due to further developments of concrete admixtures such as superplasticizers, the cement paste can gain self levelling properties without causing segregation of aggregates. Whereas SCC differs from normal vibrated concrete in its fresh attributes, it should reach similar properties in the hardened state. Due to the increased paste volume it usually shows higher shrinkage. Furthermore, owing to strength requirements, SCC is often produced at low water to cement ratios and hence may additionally suffer from autogenous shrinkage. This means that cracking caused by drying or autogenous shrinkage is a real risk for SCC and can compromise its durability as cracks may serve as ingression paths for gases and salts or might permit leaching. For the time being SCC still exhibits increased shrinkage and cracking probability and hence may be discarded in many practical applications. This can be overcome by a better understanding of those mechanisms and the ways to mitigate them. It is a target of this thesis to contribute to this. How to cope with increased shrinkage of SCC? In general, engineers are facing severe problems related to shrinkage and cracking. Even for normal and high performance concrete, containing moderate amounts of binder, a lot of effort was put on counteracting shrinkage and avoiding cracking. For the time being these efforts resulted in the knowledge of how to distribute cracks rather to avoid them. The most efficient way to decrease shrinkage turned out to be to decrease the cement content of concrete down to a minimum but still sufficient amount. For SCC this obviously seems to be contradictory with the requirement of a high paste volume. Indeed, the potential for shrinkage reduction is limited to some small range modifications in the mix design following two major concepts. The first one is the reduction of the required paste volume by optimising the aggregate grading curve. The second one involves high volume substitution of cement, preferentially using inert mineral additives. The optimization of grading curves is limited by several severe practical issues. Problems start with the availability of sufficiently fractionated aggregates. Usually attempts fail because of the enormous effort in composing application-optimized grading curves or mix designs. Due to durability reasons, the substitution rate for cement is limited depending on the application purpose and on environmental exposure of the hardened concrete. In the early 1980s Shrinkage Reducing Admixtures (SRA) were introduced to counteract drying shrinkage of concrete. The first publications explicitly dealing with SRA go back to Goto and Sato (Japan). They were published in 1983, which is also the time when the SCC concept was introduced. SRA modified concretes showed a substantial reduction of free drying shrinkage contributing to crack prevention or at least a significant decrease of crack width in situations of restrained drying shrinkage. Will shrinkage reducing admixtures contribute to a broader application of SCC? Within the last three decades performance tests on several types of concrete proved the efficiency of shrinkage reducing admixtures. So, at least in terms of shrinkage and cracking, concretes in general and SCC in particular can benefit from SRA application. But "One man's meat is another man's poison" and with respect to long term performance of SRA modified concretes there are still several issues to be clarified. One of these concerns the impact of SRAs on cement hydration. It is therefore an issue to know if changes in the hydrated phase composition, induced by SRA, result in undesired properties or decreased durability. Another issue is that the long term shrinkage reduction has to be evaluated. For example, one can wonder if SRA leaching may diminish or even eliminate long term shrinkage reduction and if the release of admixtures could be a severe environmental issue. It should also be noted that the basic mechanism or physical impact of SRA as well as its implementation in recent models for shrinkage of concrete is still being discussed. The present thesis tries to shed light on the role of SRA in self consolidating concrete focusing on the three questions outlined above: basic mechanisms of cement hydration, physical impact on shrinkage and the sustainability of SRA-application. Which contributions result from this study? Based on an extensive patent search, commercial SRAs could be identified to be synergistic mixtures of non-ionic surfactants and glycols. This turns out to be most important information for more than one reason and is the subject of chapter 4. An abundant literature focuses on properties of these non-ionic surfactants. Moreover, from this rich pool of information, the behaviour of SRAs and their interactions in cementitious systems were better understood through this thesis. For example, it could be anticipated how SRAs behave in strong electrolytes and how surface activity, i.e. surface tension, and interparticle forces might be affected. The synergy effect regarding enhanced performance induced by the presence of additional glycol in SRAs could be derived from the literature on the co-surfactant nature of glycols. Generally it now can be said that glycols ensure that the non-ionic surfactant is properly distributed onto the paste interfaces to efficiently reduce surface tension. In literature, the impact of organic matter on cement hydration was extensively studied for other admixtures like superplasticizer. From there, main impact factors related to the nature of these molecules could be identified. In addition, here again, the literature on non-ionic surfactants provides sufficient information to anticipate possible interactions of SRA with cement hydration based on the nature of non-ionic surfactants. All in all, the extensive study on the nature of non-ionic surfactants, presented in chapter 4, provides fundamental understanding of the behaviour of SRAs in cement paste. Taking a step further to relate this to the impact on drying and shrinkage required to review recent models for drying and shrinkage of cement paste as presented in chapter 3. There, it is shown that macroscopic thermodynamics of the open pore systems can be successfully applied to predict drying induced deformation, but that surface activity of SRA still has to be implemented to explain the shrinkage reduction it causes. Because of severe issues concerning the importance of capillary pressure on shrinkage, a new macroscopic thermodynamic model was derived in a way that meets requirements to properly incorporate surface activity of SRA. This is the subject of chapter 5. Based on theoretical considerations, in chapter 5 the broader impact of SRA on drying cementitious matter could be outlined. In a next step, cement paste was treated as a deformable, open drying pore system. Thereby, the drying phenomena of SRA modified mortars and concrete observed by other authors could be retrieved. This phenomenological consistency of the model constitutes an important contribution towards the understanding of SRA mechanisms. Another main contribution of this work came from introducing an artificial pore system, denominated the normcube. Using this model system, it could be shown how the evolution of interfacial area and its properties interact in presence of SRAs and how this impacts drying characteristics. In chapter 7, the surface activity of commercial SRAs in aqueous solution and synthetic pore solution was investigated. This shows how the electrolyte concentration of synthetic pore solution impacts the phase behaviour of SRA and conversely, how the presence of SRA impacts the aqueous electrolyte solution. Whilst electrolytes enhance self-aggregation of SRAs into micelles and liquid crystals, the presence of SRAs leads to precipitation of minerals as syngenite and mirabilite. Moreover, electrolyte solutions containing SRAs comprise limited miscibility or rather show miscibility gaps, where the liquid separates into isotropic micellar solutions and surfactant rich reverse micellar solutions. The investigation of surface activity and phase behaviour of SRA unravelled another important contribution. From macroscopic surface tension measurements, a relationship between excess surface concentration of SRA, bulk concentration of SRA and exposed interfacial area could be derived. Based on this, it is now possible to predict the actual surface tension of the pore fluid in the course of drying once the evolution of internal interfacial area is known. This is used later in this thesis to describe the specific drying and shrinkage behaviour of SRA modified pastes and mortars. Calorimetric studies on normal Portland cement and composite binders revealed that SRA alone show only minor impact on hydration kinetics. In presence of superplasticizer however the cement hydration can be significantly decelerated. The delaying impact of SRA could be related to a selective deceleration of silicate phase hydration. Moreover, it could be shown that portlandite precipitation in presence of SRA is changed, turning the compact habitus into more or less layered structures. Thereby, the specific surface increases, causing the amount of physically bound water to increase, which in turn reduces the maximum degree of hydration achievable for sealed systems. Extensive phase analysis shows that the hydrated phase composition of SRA modified binders re-mains almost unaffected. The appearance of a temporary mineral phase could be detected by environmental scanning electron microscopy. As could be shown for synthetic pore solutions, syngenite precipitates during early hydration stages and is later consumed in the course of aluminate hydration, i.e. when sulphates are depleted. Moreover, for some SRAs, the salting out phenomena supposed to be enhanced in strong electrolytes could also be shown to take place. The resulting organic precipitates could be identified by SEM-EDX in cement paste and by X-ray diffraction on solid residues of synthetic pore solution. The presence of SRAs could also be identified to impact microstructure of well cured cement paste. Based on nitrogen adsorption measurements and mercury intrusion porosimetry the amount of small pores is seen to increase with SRA dosage, whilst the overall porosity remains unchanged. The question regarding sustainability of SRA application is the subject of chapter 10. By means of leaching studies it could be shown that SRA can be leached significantly. The mechanism could be identified as a diffusion process and a range of effective diffusion coefficients could be estimated. Thereby, the leaching of SRA can now be estimated for real structural members. However, while the admixture can be leached to high extents in tank tests, the leaching rates in practical applications can be assumed to be low because of much reduced contact with water. This could be proven by quantifying admixture loss during long term drying and rewetting cycles. Despite a loss of admixture shrinkage reduction is hardly impacted. Moreover, the cyclic tests revealed that the total deformations in presence of SRA remain low due to a lower extent of irreversibly shrinkage deformations. Another important contribution towards the better understanding of the working mechanism of SRA for drying and shrinkage came from the same leaching tests. A significant fraction of SRA is found to be immobile and does not diffuse in leaching. This fraction of SRA is probably strongly associated to cement phases as the calcium-silicate-hydrates or portlandite. Based on these findings, it is now also possible to quantify the amount of admixture active at the interfaces. This means that, the evolution of surface tension in the course of drying can be approximated, which is a fundamental requirement for modeling shrinkage in presence of SRA. The last experimental chapter of this study focuses on the working mechanism and impact of SRA on drying and shrinkage. Based on the thermodynamics of the open deformable pore system introduced in chapter 5, energy balances are set up using desorption and shrinkage isotherms of actual samples. Information on distribution of SRA in the hydrated paste is used to estimate the actual surface tensions of the pore solution. In other words, this is the first time that the surface activity of the SRA in the course of the drying is fully accounted for. From the energy balances the evolution and properties of the internal interface are then obtained. This made it possible to explain why SRAs impact drying and shrinkage and in what specific range of relative humidity they are active. Summarising the findings of this thesis it can be said that the understanding of the impact of SRAs on hydration, drying and shrinkage was brought forward. Many of the new insights came from the careful investigation of the theory of non-ionic surfactants, something that the cement community had generally overlooked up to now.
Lettenkeuper- und Schilfsandsteine sind in Thüringen weit verbreitet und wurden häufig als Werk- und Bildhauersandsteine verwendet. Die überwiegend tonig-ferritisch gebundenen Steine sind stark witterungsanfällig. Inzwischen droht ein unwiederbringlicher Substanzverlust an vielen denkmalpflegerisch wertvollen Gebäuden und an plastischen Bildwerken. Die Dissertation gibt einen Überblick über die Vorkommen, Eigenschaften und Schadbilder dieser Sandsteine in Thüringen. Konservierungsmaßnahmen, die in Thüringen in den vergangenen 20 Jahren an Lettenkeuper- und Schilfsandsteinen vorgenommen wurden, werden ausgewertet und neue Erkenntnisse zur Konservierung dieser Sandsteine vorgestellt.