620 Ingenieurwissenschaften
Refine
Document Type
- Conference Proceeding (9) (remove)
Institute
Keywords
- Ingenieurbau (3)
- Structural Engineering (3)
- Ingenieurwissenschaften (2)
- Proceedings (2)
- Sommerkurs (2)
- proceedings (2)
- summer school (2)
- Adaptable design (1)
- Alterung (1)
- Architecture (1)
Kleine Kommunen im ländlichen Raum sind aufgrund ihrer oft eingeschränkten personellen und finanziellen Kapazitäten bisher eher sporadisch in den Themenfeldern Energieeffizienz und Erneuerbare Energien aktiv. Immer wieder stellt sich daher Frage, wie die Klimaschutzstrategien des Bundes und der Länder dort mit dem verfügbaren Personal kostengünstig realisierbar sind. Vor diesem Hintergrund wird ein Werkzeug entwickelt, mit dessen Hilfe der aktive Einstieg in diese Thematik mit geringen Aufwand und überwiegend barrierefrei möglich ist.
Der Aufbau eines prozessorientierten Entwicklungs- und Moderationsmodells zur Erprobung und Umsetzung bezahlbarer Handlungsoptionen für Energieeinsparungen und effizienten Energieeinsatz im überwiegend ländlichen geprägten Raum ist der Schwerpunkt der Softwarelösung.
Kommunen werden mit deren Hilfe in die Lage versetzt, in die notwendigen Prozesse der Energie- und Wärmewende einzusteigen. Dabei soll der modulare Aufbau die regulären Schritte notwendiger (integrierter) Planungsprozesse nicht vollständig ersetzen. Vielmehr können innerhalb der Online-Anwendung - überwiegend automatisiert - konkrete Maßnahmenvorschläge erstellt werden, die ein solides Fundament der künftigen energetischen Entwicklung der Kommunen darstellen.
Für eine gezielte Validierung der Ergebnisse und der Ableitung potentieller Maßnahmen werden für die Erprobung Modellkommunen in Thüringen, Bayern und Hessen als Reallabore einbezogen.
Das Tool steht bisher zunächst nur den beteiligten Modellkommunen zur Verfügung. Die entwickelte Softwarelösung soll künftig Schritt für Schritt allen interessierten Kommunen mit diversen Hilfsmitteln und einer Vielzahl anderer praktischer Bestandteile zur Verfügung gestellt werden.
Bei Analysen des Gebäudebestands im Quartierskontext werden zu Dokumentationszwecken viele Bilddaten erzeugt. Diese Daten sind im Nachhinein häufig keinen eindeutig genauen Standorten und Blickwinkeln auf das Bauwerk zuzuordnen. Insbesondere gilt dies für Ortsunkundige oder für Detailaufnahmen. Eine zusätzliche Herausforderung stellt die Aufnahme von Wärmebrücken- oder andersartigen Gebäudedetails durch Thermogramme dar. In der Praxis kommen hier oftmals analoge, fehleranfällige Lösungen zum Einsatz.
Durch die Nutzung von Georeferenzierung kann diese Lücke geschlossen und eine eindeutige Kommunikation und Auswertung gewährleistet werden. Im Gegensatz zu den üblichen Kameras sind Smartphones nach Stand der Technik ausreichend ausgestattet, um neben Daten zu Standort auch die Orientierungswinkel einer Bildaufnahme zu dokumentieren. Die georefenzierten Bilder können auf Grundlage der in den sogenannten Exif-Daten mitgeschriebenen Informationen händisch in ein bestehendes Quartiersmodell integriert werden.
Anhand eines universitären Musterquartiers wird die nutzerfreundliche Realisierung beispielhaft erprobt und auf ihre Potentiale zur Automatisierung in Python untersucht. Hierfür wurde ein bestehendes Quartiersmodell als geometrische Grundlage genutzt und um RGB-Bilder sowie Thermogramme erweitert. Das beschriebene Vorgehen wird im Rahmen der Anwendung auf seinen möglichen Einsatz im Rahmen einer energetischen Quartierserfassung sowie einer Bauschadensdokumentation untersucht.
Mit dem vorliegenden Beitrag wird dem Nutzenden ein Werkzeug bereitgestellt, das die hochwertige Dokumentation einer Bestandserfassung, auch im Quartierskontext, ermöglicht.
Institute of Structural Engineering, Institute of Structural Mechanics, as well as Institute for Computing, Mathematics and Physics in Civil Engineering at the faculty of civil engineering at the Bauhaus-Universität Weimar presented special topics of structural engineering to highlight the broad spectrum of civil engineering in the field of modeling and simulation.
The summer course sought to impart knowledge and to combine research with a practical context, through a challenging and demanding series of lectures, seminars and project work. Participating students were enabled to deal with advanced methods and its practical application.
The extraordinary format of the interdisciplinary summer school offers the opportunity to study advanced developments of numerical methods and sophisticated modelling techniques in different disciplines of civil engineering for foreign and domestic students, which go far beyond traditional graduate courses.
The proceedings at hand are the result from the Bauhaus Summer School course: Forecast Engineering held at the Bauhaus-Universität Weimar, 2018. It summarizes the results of the conducted project work, provides the abstracts/papers of the contributions by the participants, as well as impressions from the accompanying programme and organized cultural activities.
The design of engineering structures takes place today and in the past on the basis of static calculations. The consideration of uncertainties in the model quality becomes more and more important with the development of new construction methods and design requirements. In addition to the traditional forced-based approaches, experiences and observations about the deformation behavior of components and the overall structure under different exposure conditions allow the introduction of novel detection and evaluation criteria.
The proceedings at hand are the result from the Bauhaus Summer School Course: Forecast Engineering held at the Bauhaus-Universität Weimar, 2017. It summarizes the results of the conducted project work, provides the abstracts of the contributions by the participants, as well as impressions from the accompanying programme and organized cultural activities.
The special character of this course is in the combination of basic disciplines of structural engineering with applied research projects in the areas of steel and reinforced concrete structures, earthquake and wind engineering as well as informatics and linking them to mathematical methods and modern tools of visualization. Its innovative character results from the ambitious engineering tasks and advanced
modeling demands.
The proceedings at hand are the result of the International Master Course Module: "Nonlinear Analysis of Structures: Wind Induced Vibrations" held at the Faculty of Civil Engineering at Bauhaus-University Weimar, Germany in the summer semester 2019 (April - August). This material summarizes the results of the project work done throughout the semester, provides an overview of the topic, as well as impressions from the accompanying programme.
Wind Engineering is a particular field of Civil Engineering that evaluates the resistance of structures caused by wind loads. Bridges, high-rise buildings, chimneys and telecommunication towers might be susceptible to wind vibrations due to their increased flexibility, therefore a special design is carried for this aspect. Advancement in technology and scientific studies permit us doing research at small scale for more accurate analyses. Therefore scaled models of real structures are built and tested for various construction scenarios. These models are placed in wind tunnels where experiments are conducted to determine parameters such as: critical wind speeds for bridge decks, static wind coefficients and forces for buildings or bridges. The objective of the course was to offer insight to the students into the assessment of long-span cable-supported bridges and high-rise buildings under wind excitation. The participating students worked in interdisciplinary teams to increase their knowledge in the understanding and influences on the behaviour of wind-sensitive structures.
Components of structural glazing have to meet different requirements and resist various impacts, depending on the field of application. Within an international research project of the EU innovation program Horizon 2020, special glass panes with a fluid circulating in capillaries are developed exploiting solar energy. Major influences to this glazing are UV irradiation and the fluidic contact, effecting the mechanical and optical durability of the bonding material within the glass setup. Regarding to visual requirements, acrylate adhesives and EVA films are analyzed as possible bonding materials by destructive and non-destructive testing methods. Two types of specimen are presented for obtaining the mechanical behavior and the surface appearances of the bonding material.
Der vorliegende Beitrag beschreibt die Problematik bei der Prognose verkehrsbedingter Schadstoff-Immissionen. Im Mittelpunkt steht die Entwicklung und der Aufbau einer Simulationsumgebung zur Evaluation von umweltorientierten Verkehrsmanagement-Strategien. Die Simulationsumgebung wird über die drei Felder Verkehr, Emission, Immission entwickelt und findet zunächst Anwendung in der Evaluation verkehrlicher Maßnahmen für die Friedberger Landstraße in Frankfurt am Main.
The high resource demand of the building sector clearly indicates the need to search for alternative, renewable and energy-efficient materials. This work presents paper-laminated sandwich elements with a core of corrugated paperboard that can serve as architectural components with a load-bearing capacity after a linear folding process. Conventional methods either use paper tubes or glued layers of honeycomb panels. In contrast, the folded components are extremely lightweight, provide the material strength exactly where it is statically required and offer many possibilities for design variants. After removing stripes of the paper lamination, the sandwich can be folded in a linear way at this position. Without the resistance of the missing paper, the sandwich core can be easily compressed. The final angle of the folding correlates with the width of the removed paper stripe. As such, this angle can be described by a simple geometric equation. The geometrical basis for the production of folded sandwich elements was established and many profile types were generated such as triangular, square or rectangular shapes. The method allows the easy planning and fast production of components that can be used in the construction sector. A triangle profile was used to create a load-bearing frame as supporting structure for an experimental building. This first permanent building completely made of corrugated cardboard was evaluated in a two-year test to confirm the efficiency of the developed components. In addition to the frame shown in this paper, large-scale sandwich elements with a core of folded components can be used to fabricate lightweight ceilings and large-scale sandwich components. The method enables the efficient production of linearly folded cardboard elements which can replace normal wooden components like beams, pillars or frames and bring a fully recycled material in the context of architectural construction.
Reinforced concrete walls are commonly selected as the lateral resisting systems in seismic design of buildings. The design procedure requires reliable/robust models to predict the wall response. Many researchers, thus, have focused on using the available experimental data to be able to comment on the quality of models at hand. What is missing though is an uncertain attitude towards the experimental data since such data can be affected by different sources of uncertainty. In this paper, we introduce the database created for model quality evaluation purposes considering the uncertainties in the experimental data. This is the first step of a larger study on experience-based model quality evaluation of reinforced concrete walls. Here, we briefly present the database as well as six sample validations of the developed numerical model (the quality of which is to be assessed). The database contains the information on nearly 300 wall specimens from about 50 sources. Both the database and the numerical model, built for uncertainty/sensitivity analysis purposes, are mainly based on ten parameters. These include geometry, material, reinforcement layout and loading properties. The validation results prove that the model is able to predict the wall response satisfactorily. Consequently, the validated numerical model could be used in further quality evaluation studies.