620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Refine
Document Type
- Doctoral Thesis (132) (remove)
Institute
- Institut für Strukturmechanik (ISM) (13)
- Professur Allgemeine Baustoffkunde (9)
- Professur Holz- und Mauerwerksbau (9)
- Professur Massivbau I (9)
- Professur Baumechanik (8)
- Professur Informatik im Bauwesen (8)
- F. A. Finger-Institut für Baustoffkunde (FIB) (7)
- Professur Baubetrieb und Bauverfahren (6)
- Professur Bauchemie und Polymere Werkstoffe (5)
- Professur Grundbau (5)
Keywords
- Beton (11)
- Optimierung (9)
- Finite-Elemente-Methode (8)
- Modellierung (8)
- Tragverhalten (7)
- Hydratation (5)
- Kriechen (5)
- Mikrostruktur (5)
- Stahlbeton (5)
- Bemessung (4)
Das Bauen im Bestand ist ein wichtiges, aber vergleichsweise noch wenig erforschtes Wissenschaftsfeld. Die Konzentration auf das Bauen im Bestand im Wohnungsbau führte in den bautechnischen Abteilungen von Wohnungsunternehmen zu einem strategischen Wandel. Die Betreuung der Bestandsmaßnahmen ist zum wichtigsten Aufgabenfeld der technischen Bewirtschaftung geworden. Bestandsmaßnahmen bezeichnen die Baumaßnahmen, die die Wohnobjekte (Wohngebäude, Außenanlagen) und ihre Elemente erhalten oder verändern.
Basis für eine rationale und kosteneffiziente technische Bewirtschaftung der Wohnungsbestände sind Kenntnisse der charakteristischen Eigenschaften der Bestandsmaßnahmen und ihrer Abhängigkeiten. Die bisherigen empirischen Untersuchungen zu Bestandsmaßnahmen weisen forschungsmethodische und inhaltliche Defizite auf. Der Erkenntnisgewinn ist so noch nicht für die professionelle und kosteneffiziente technische Bewirtschaftung der Wohnungsbestände umsetzbar.
Ziel der Arbeit ist es, strategische Handlungsempfehlungen für die rationale und kostenoptimierte Auswahl von Bestandsmaßnahmen in Wohnungsunternehmen zu entwickeln und zu bewerten. Darauf aufbauend soll ein Konzept für eine objektiv begründete Auswahl von Bestandsmaßnahmen entworfen werden.
Die Arbeit basiert auf der empirischen Untersuchung von Bestandsmaßnahmen. Die Maßnahmen wurden am Beispiel eines unternehmensstrategisch interessanten Wohnungsunternehmens und eines statistisch gesehen typischen Wohnungsbestandes betrachtet. Es wurden circa 3000 Maßnahmen über einen Zeitraum von fünf Jahren untersucht.
Die Maßnahme- und Kostenverteilungen der Bestandsmaßnahmen werden in Abhängigkeit vom Baualter und von unternehmensstrategischen Einflussfaktoren charakterisiert. Mit diesen Erkenntnissen werden strategische Handlungsempfehlungen zur Erfüllung der Pflichten der technischen Bewirtschaftung sowie der Gewährleistung eines Investitionsminimums abgeleitet.
Die Handlungsempfehlungen dienen der Ermittlung von Kostensenkungspotentialen und der Berechnung des Investitionsminimums der technischen Bewirtschaftung. Sie werden in ein Konzept zur objektivierten und systematischen Auswahl der Maßnahmen eingebunden.
Vom Bauwerksinformationsmodell zur Terminplanung - Ein Modell zur Generierung von Bauablaufplänen
(2011)
Die effiziente und zielgerichtete Ausführung von Bauvorhaben wird in hohem Maße von der zugrunde liegenden Bauablaufplanung beeinflusst. Dabei ist unter Verwendung herkömmlicher Methoden und Modelle die Planung des Bauablaufs ein zumeist aufwändiger und fehlerträchtiger Prozess. Am Ende der gegenwärtig üblichen Vorgehensweise für die Planung eines Bauablaufs erfolgt lediglich die Dokumentation des Endergebnisses. Mögliche Ablaufalternativen, die im Verlauf der Planung betrachtet wurden, sind im resultierenden Bauablaufplan nicht enthalten und gehen verloren. Eine formale Kontrolle des geplanten Bauablaufs hinsichtlich seiner Vollständigkeit ist nur begrenzt möglich, da beispielsweise existierende Methoden der 4D-Visualisierung derzeit nicht ausreichend in den Prozess der Planung von Bauabläufen integriert sind. Gegenstand der vorliegenden Arbeit ist die Entwicklung eines neuen Modells für die Unterstützung der Bauablaufplanung. Dafür wird der größtenteils manuelle Vorgang der Bauablaufplanung auf Basis verfügbarer Bauwerksinformationsmodelle (BIM) weitestgehend automatisiert und die Methodik der 4D-Animation in den Prozess der Bauablaufplanung integriert. Ausgehend von in einer Erfahrungsdatenbank gespeicherten Informationen werden auf Basis einer Ähnlichkeitsermittlung Bauteilen des betrachteten BIM geeignete Vorgänge zugeordnet und mittels Algorithmen der Graphentheorie ein Workflowgraph aller mög\-lichen Bauablaufvarianten generiert. Aufgrund der vorgenommenen Kopplung des Bauablaufplans mit Bauteilen eines BIM und der visuellen Darstellung des Bauablaufs kann vom Planer im Rahmen der Modellierungsgenauigkeit des BIM auf die Vollständigkeit des Bauablaufplans geschlossen werden. Dies ermöglicht dem Anwender ein hohes Maß an Kontrolle des geplanten Bauablaufs bereits innerhalb der Planungsphase. Weiterhin unterstützt das entwickelte Modell die Integration von Ablaufvarianten, was deren Gegenüberstellung ermöglicht und die Wiederverwendbarkeit bereits geplanter Bauabläufe durch eine entsprechend ausgerichtete Abbildung des Modells. Die Anwendbarkeit des erarbeiteten Modells wird anhand einer prototypischen Implementierung nachgewiesen und anhand eines Praxisbeispiels verifiziert.
Numerical models and their combination with advanced solution strategies are standard tools for many engineering disciplines to design or redesign structures and to optimize designs with the purpose to improve specific requirements. As the successful application of numerical models depends on their suitability to represent the behavior related to the intended use, they should be validated by experimentally obtained results. If the discrepancy between numerically derived and experimentally obtained results is not acceptable, a model revision or a revision of the experiment need to be considered. Model revision is divided into two classes, the model updating and the basic revision of the numerical model. The presented thesis is related to a special branch of model updating, the vibration-based model updating. Vibration-based model updating is a tool to improve the correlation of the numerical model by adjusting uncertain model input parameters by means of results extracted from vibration tests. Evidently, uncertainties related to the experiment, the numerical model, or the applied numerical solving strategies can influence the correctness of the identified model input parameters. The reduction of uncertainties for two critical problems and the quantification of uncertainties related to the investigation of several nominally identical structures are the main emphases of this thesis. First, the reduction of uncertainties by optimizing reference sensor positions is considered. The presented approach relies on predicted power spectral amplitudes and an initial finite element model as a basis to define the assessment criterion for predefined sensor positions. In combination with geometry-based design variables, which represent the sensor positions, genetic and particle swarm optimization algorithms are applied. The applicability of the proposed approach is demonstrated on a numerical benchmark study of a simply supported beam and a case study of a real test specimen. Furthermore, the theory of determining the predicted power spectral amplitudes is validated with results from vibration tests. Second, the possibility to reduce uncertainties related to an inappropriate assignment for numerically derived and experimentally obtained modes is investigated. In the context of vibration-based model updating, the correct pairing is essential. The most common criterion for indicating corresponding mode shapes is the modal assurance criterion. Unfortunately, this criterion fails in certain cases and is not reliable for automatic approaches. Hence, an alternative criterion, the energy-based modal assurance criterion, is proposed. This criterion combines the mathematical characteristic of orthogonality with the physical properties of the structure by modal strain energies. A numerical example and a case study with experimental data are presented to show the advantages of the proposed energy-based modal assurance criterion in comparison to the traditional modal assurance criterion. Third, the application of optimization strategies combined with information theory based objective functions is analyzed for the purpose of stochastic model updating. This approach serves as an alternative to the common sensitivity-based stochastic model updating strategies. Their success depends strongly on the defined initial model input parameters. In contrast, approaches based on optimization strategies can be more flexible. It can be demonstrated, that the investigated nature inspired optimization strategies in combination with Bhattacharyya distance and Kullback-Leibler divergence are appropriate. The obtained accuracies and the respective computational effort are comparable with sensitivity-based stochastic model updating strategies. The application of model updating procedures to improve the quality and suitability of a numerical model is always related to additional costs. The presented innovative approaches will contribute to reduce and quantify uncertainties within a vibration-based model updating process. Therefore, the increased benefit can compensate the additional effort, which is necessary to apply model updating procedures.
In der vorliegenden Arbeit wird eine kraftschlüssige Verbindungstechnik für modulare, schalenartige Faserverbundbauteile vorgestellt. Die Verbindung basiert auf der Verklebung mit lokal begrenzten Stahlblechen. Aus dem Verbindungsansatz wird die Verklebung zwischen Stahl und Faserverbundkunststoff vertiefend betrachtet. Ziel sind die Wahl von technologischen Randbedingungen, die Erarbeitung eines Vorschlages zur numerischen Berechnung und Bemessung und die Formulierung konstruktiver Empfehlungen zum Entwurf von Verklebungen. Mechanische Kennwerte werden in Zugversuchen ermittelt und direkt auf die nichtlinearen Berechnungen übertragen. Technologische Einflüsse und die Streuungen aus realen Verklebungen werden über die Nachrechnung von Zugscherversuchen in die Bemessung integriert. Es wird gezeigt, dass die Verklebungen ausreichende Festigkeiten und ein zufriedenstellendes Bruchverhalten aufweisen. Die Kombination aus einer Werkstattverklebung und einer baustellengerechten Montage ermöglicht eine materialgerechte und effiziente Verbindungen für Faserverbundkonstruktionen unter den Randbedingungen des Bauwesens.
On the mechanisms of shrinkage reducing admixtures in self con-solidating mortars and concretes
(2010)
Self Consolidating Concrete – a dream has come true!(?) Self Consolidating Concrete (SCC) is mainly characterised by its special rheological properties. With-out any vibration this concrete can be placed and compacted under its own weight, without segrega-tion or bleeding. The use of such concrete can increase the productivity on construction sites and en-able the use of a higher degree of well distributed reinforcement for thin walled structural members. This new technology also reduces health risks since in contrast to the traditional handling of concrete, the emission of noise and vibration are substantially decreased. The specific mix design for self consolidating concretes was introduced around the 1980s in Japan. In comparison to normal vibrated concrete an increased paste volume enables a good distribution of aggregates within the paste matrix, minimising the influence of aggregates friction on the concrete flow property. The introduction of inert and/or pozzolanic additives as part of the paste provides the required excess paste volume without using disproportionally high amounts of plain cement. Due to further developments of concrete admixtures such as superplasticizers, the cement paste can gain self levelling properties without causing segregation of aggregates. Whereas SCC differs from normal vibrated concrete in its fresh attributes, it should reach similar properties in the hardened state. Due to the increased paste volume it usually shows higher shrinkage. Furthermore, owing to strength requirements, SCC is often produced at low water to cement ratios and hence may additionally suffer from autogenous shrinkage. This means that cracking caused by drying or autogenous shrinkage is a real risk for SCC and can compromise its durability as cracks may serve as ingression paths for gases and salts or might permit leaching. For the time being SCC still exhibits increased shrinkage and cracking probability and hence may be discarded in many practical applications. This can be overcome by a better understanding of those mechanisms and the ways to mitigate them. It is a target of this thesis to contribute to this. How to cope with increased shrinkage of SCC? In general, engineers are facing severe problems related to shrinkage and cracking. Even for normal and high performance concrete, containing moderate amounts of binder, a lot of effort was put on counteracting shrinkage and avoiding cracking. For the time being these efforts resulted in the knowledge of how to distribute cracks rather to avoid them. The most efficient way to decrease shrinkage turned out to be to decrease the cement content of concrete down to a minimum but still sufficient amount. For SCC this obviously seems to be contradictory with the requirement of a high paste volume. Indeed, the potential for shrinkage reduction is limited to some small range modifications in the mix design following two major concepts. The first one is the reduction of the required paste volume by optimising the aggregate grading curve. The second one involves high volume substitution of cement, preferentially using inert mineral additives. The optimization of grading curves is limited by several severe practical issues. Problems start with the availability of sufficiently fractionated aggregates. Usually attempts fail because of the enormous effort in composing application-optimized grading curves or mix designs. Due to durability reasons, the substitution rate for cement is limited depending on the application purpose and on environmental exposure of the hardened concrete. In the early 1980s Shrinkage Reducing Admixtures (SRA) were introduced to counteract drying shrinkage of concrete. The first publications explicitly dealing with SRA go back to Goto and Sato (Japan). They were published in 1983, which is also the time when the SCC concept was introduced. SRA modified concretes showed a substantial reduction of free drying shrinkage contributing to crack prevention or at least a significant decrease of crack width in situations of restrained drying shrinkage. Will shrinkage reducing admixtures contribute to a broader application of SCC? Within the last three decades performance tests on several types of concrete proved the efficiency of shrinkage reducing admixtures. So, at least in terms of shrinkage and cracking, concretes in general and SCC in particular can benefit from SRA application. But "One man's meat is another man's poison" and with respect to long term performance of SRA modified concretes there are still several issues to be clarified. One of these concerns the impact of SRAs on cement hydration. It is therefore an issue to know if changes in the hydrated phase composition, induced by SRA, result in undesired properties or decreased durability. Another issue is that the long term shrinkage reduction has to be evaluated. For example, one can wonder if SRA leaching may diminish or even eliminate long term shrinkage reduction and if the release of admixtures could be a severe environmental issue. It should also be noted that the basic mechanism or physical impact of SRA as well as its implementation in recent models for shrinkage of concrete is still being discussed. The present thesis tries to shed light on the role of SRA in self consolidating concrete focusing on the three questions outlined above: basic mechanisms of cement hydration, physical impact on shrinkage and the sustainability of SRA-application. Which contributions result from this study? Based on an extensive patent search, commercial SRAs could be identified to be synergistic mixtures of non-ionic surfactants and glycols. This turns out to be most important information for more than one reason and is the subject of chapter 4. An abundant literature focuses on properties of these non-ionic surfactants. Moreover, from this rich pool of information, the behaviour of SRAs and their interactions in cementitious systems were better understood through this thesis. For example, it could be anticipated how SRAs behave in strong electrolytes and how surface activity, i.e. surface tension, and interparticle forces might be affected. The synergy effect regarding enhanced performance induced by the presence of additional glycol in SRAs could be derived from the literature on the co-surfactant nature of glycols. Generally it now can be said that glycols ensure that the non-ionic surfactant is properly distributed onto the paste interfaces to efficiently reduce surface tension. In literature, the impact of organic matter on cement hydration was extensively studied for other admixtures like superplasticizer. From there, main impact factors related to the nature of these molecules could be identified. In addition, here again, the literature on non-ionic surfactants provides sufficient information to anticipate possible interactions of SRA with cement hydration based on the nature of non-ionic surfactants. All in all, the extensive study on the nature of non-ionic surfactants, presented in chapter 4, provides fundamental understanding of the behaviour of SRAs in cement paste. Taking a step further to relate this to the impact on drying and shrinkage required to review recent models for drying and shrinkage of cement paste as presented in chapter 3. There, it is shown that macroscopic thermodynamics of the open pore systems can be successfully applied to predict drying induced deformation, but that surface activity of SRA still has to be implemented to explain the shrinkage reduction it causes. Because of severe issues concerning the importance of capillary pressure on shrinkage, a new macroscopic thermodynamic model was derived in a way that meets requirements to properly incorporate surface activity of SRA. This is the subject of chapter 5. Based on theoretical considerations, in chapter 5 the broader impact of SRA on drying cementitious matter could be outlined. In a next step, cement paste was treated as a deformable, open drying pore system. Thereby, the drying phenomena of SRA modified mortars and concrete observed by other authors could be retrieved. This phenomenological consistency of the model constitutes an important contribution towards the understanding of SRA mechanisms. Another main contribution of this work came from introducing an artificial pore system, denominated the normcube. Using this model system, it could be shown how the evolution of interfacial area and its properties interact in presence of SRAs and how this impacts drying characteristics. In chapter 7, the surface activity of commercial SRAs in aqueous solution and synthetic pore solution was investigated. This shows how the electrolyte concentration of synthetic pore solution impacts the phase behaviour of SRA and conversely, how the presence of SRA impacts the aqueous electrolyte solution. Whilst electrolytes enhance self-aggregation of SRAs into micelles and liquid crystals, the presence of SRAs leads to precipitation of minerals as syngenite and mirabilite. Moreover, electrolyte solutions containing SRAs comprise limited miscibility or rather show miscibility gaps, where the liquid separates into isotropic micellar solutions and surfactant rich reverse micellar solutions. The investigation of surface activity and phase behaviour of SRA unravelled another important contribution. From macroscopic surface tension measurements, a relationship between excess surface concentration of SRA, bulk concentration of SRA and exposed interfacial area could be derived. Based on this, it is now possible to predict the actual surface tension of the pore fluid in the course of drying once the evolution of internal interfacial area is known. This is used later in this thesis to describe the specific drying and shrinkage behaviour of SRA modified pastes and mortars. Calorimetric studies on normal Portland cement and composite binders revealed that SRA alone show only minor impact on hydration kinetics. In presence of superplasticizer however the cement hydration can be significantly decelerated. The delaying impact of SRA could be related to a selective deceleration of silicate phase hydration. Moreover, it could be shown that portlandite precipitation in presence of SRA is changed, turning the compact habitus into more or less layered structures. Thereby, the specific surface increases, causing the amount of physically bound water to increase, which in turn reduces the maximum degree of hydration achievable for sealed systems. Extensive phase analysis shows that the hydrated phase composition of SRA modified binders re-mains almost unaffected. The appearance of a temporary mineral phase could be detected by environmental scanning electron microscopy. As could be shown for synthetic pore solutions, syngenite precipitates during early hydration stages and is later consumed in the course of aluminate hydration, i.e. when sulphates are depleted. Moreover, for some SRAs, the salting out phenomena supposed to be enhanced in strong electrolytes could also be shown to take place. The resulting organic precipitates could be identified by SEM-EDX in cement paste and by X-ray diffraction on solid residues of synthetic pore solution. The presence of SRAs could also be identified to impact microstructure of well cured cement paste. Based on nitrogen adsorption measurements and mercury intrusion porosimetry the amount of small pores is seen to increase with SRA dosage, whilst the overall porosity remains unchanged. The question regarding sustainability of SRA application is the subject of chapter 10. By means of leaching studies it could be shown that SRA can be leached significantly. The mechanism could be identified as a diffusion process and a range of effective diffusion coefficients could be estimated. Thereby, the leaching of SRA can now be estimated for real structural members. However, while the admixture can be leached to high extents in tank tests, the leaching rates in practical applications can be assumed to be low because of much reduced contact with water. This could be proven by quantifying admixture loss during long term drying and rewetting cycles. Despite a loss of admixture shrinkage reduction is hardly impacted. Moreover, the cyclic tests revealed that the total deformations in presence of SRA remain low due to a lower extent of irreversibly shrinkage deformations. Another important contribution towards the better understanding of the working mechanism of SRA for drying and shrinkage came from the same leaching tests. A significant fraction of SRA is found to be immobile and does not diffuse in leaching. This fraction of SRA is probably strongly associated to cement phases as the calcium-silicate-hydrates or portlandite. Based on these findings, it is now also possible to quantify the amount of admixture active at the interfaces. This means that, the evolution of surface tension in the course of drying can be approximated, which is a fundamental requirement for modeling shrinkage in presence of SRA. The last experimental chapter of this study focuses on the working mechanism and impact of SRA on drying and shrinkage. Based on the thermodynamics of the open deformable pore system introduced in chapter 5, energy balances are set up using desorption and shrinkage isotherms of actual samples. Information on distribution of SRA in the hydrated paste is used to estimate the actual surface tensions of the pore solution. In other words, this is the first time that the surface activity of the SRA in the course of the drying is fully accounted for. From the energy balances the evolution and properties of the internal interface are then obtained. This made it possible to explain why SRAs impact drying and shrinkage and in what specific range of relative humidity they are active. Summarising the findings of this thesis it can be said that the understanding of the impact of SRAs on hydration, drying and shrinkage was brought forward. Many of the new insights came from the careful investigation of the theory of non-ionic surfactants, something that the cement community had generally overlooked up to now.
Verkehrsmengenrisiko bei PPP-Projekten im Straßensektor - Determinanten effizienter Risikoallokation
(2010)
Trotz weltweit umfangreichen Erfahrungen mit Public Private Partnership Projekten im Straßensektor bleibt der Umgang mit dem Verkehrsmengenrisiko für die Projektbeteiligten eine Herausforderung. Die Arbeit widmet sich daher der wesentlichen Fragestellung nach einer effizienten Allokation dieses Risikos, dem nicht weniger Bedeutung zukommt als für den gesamtwirtschaftlichen Erfolg eines Straßenkonzessionsprojektes eine entscheidende Rolle zu spielen. Untersucht werden zunächst die Charakteristika des Verkehrsmengenrisikos mit seinen umfänglichen Einflussfaktoren. Anschließend werden die in der Praxis zur Anwendung kommenden Vertragsmodelle zur Bewirtschaftung von Straßeninfrastruktur dargestellt und analysiert, wie in den einzelnen Modellen Verkehrsmengenrisiko auf die verschiedenen Vertragspartner verteilt wird. Auf Basis dieser Grundlagen wird ein kriteriengestützter Analyserahmen entwickelt, der die Effizienz unterschiedlicher Risikoallokationen zwischen den Vertragspartner bewertet. Dabei werden einerseits die effizienzbeeinflussenden Eigenschaften der potentiellen Risikoträger eines PPP-Projektes berücksichtigt als auch die die effizienzbeeinflussenden Wirkungen der unterschiedlichen Vertragsmodelle. Aus den Erkenntnissen dieser Analyse werden letztlich Handlungs- und Gestaltungsempfehlungen zum Umgang mit dem Verkehrsmengenrisiko abgeleitet.
Seit 1969 werden für die Bundesrepublik kontinuierlich Berechnungen zu den Gesamtkosten des Straßenverkehrs der Bundesfernstraßen und deren Verteilung auf die Verkehrsteilnehmer durchgeführt. Die Ergebnisse der Wegekostenrechnungen der Jahre 2002 und 2007 sind die Grundlage für die mittlerweile für das deutsche Autobahnnetz eingeführte fahrleistungsbezogene Benutzungsgebühr für Lkw mit einem zulässigen Gesamtgewicht von mindestens zwölf Tonnen. Damit wird die Forderung der EU-Richtlinie 1999/62/EG umgesetzt, nach der sich die durchschnittlichen Straßenbenutzungsgebühren an den Kosten für den Bau, den Betrieb und den Ausbau des betreffenden Verkehrswegenetzes orientieren sollen. Mit der EU-Richtlinie 2006/38/EG kündigt sich die weitere Entwicklung bei der Berechnung von Straßenbenutzungsgebühren an. Zukünftig sollen auch externe Kosten in die Berechnung einfließen. Ein erster Schritt zur Berücksichtigung dieser externen Kosten erfolgte mit Erstellung eines Handbuchs im Rahmen eines EU-Forschungsprojektes. Das Handbuch enthält aufgrund der unterschiedlichen Rahmenbedingungen in den Mitgliedsstaaten der EU keine exakten Berechnungsvorschriften, sondern stellt verschiedene methodische Ansätze bisher durchgeführter Studien zu externen Kosten vor, gibt Empfehlungen hinsichtlich der Methodenwahl und beinhaltet Schätzungen über die Höhe der externen Kosten. Die im europäischen Raum in den vergangenen Jahren durchgeführten Studien zur Ermittlung externer Kosten des Verkehrs zeichnen sich durch einander ähnelnde Vorgehensweisen aus, die aber vor allem hinsichtlich der Kostenrechnungsart und der verwendeten Kostensätze aus Sicht des Verfassers der vorliegenden Arbeit kritische Aspekte aufweisen. In der vorliegenden Dissertationsschrift wird daher eine alternative Berechnungsmethodik zur Ermittlung abschnitts-, fahrzeugklassen- und fahrleistungsbezogener externer Kosten für Autobahnen entwickelt und an einem ausgewählten Beispielnetz zur Anwendung gebracht. Dabei wird in einigen wesentlichen Punkten von der in aktuellen Studien überwiegend gewählten Vorgehensweise abgewichen, um eine andere Sichtweise darzustellen. Damit trägt die vorliegende Arbeit substanziell zur Erweiterung des Erkenntnisstands zu Berechnungsmethoden externer Kosten des Straßenverkehrs bei. Die hier entwickelte Berechnungsmethodik ist außerdem als Grundlage für ein in der Praxis anwendbares Verfahren zu verstehen und zeichnet sich auch daher durch eine einfach zu handhabende Übertragbarkeit auf das gesamte Autobahnnetz Deutschlands aus. Die Abschnitte entsprechen den Teilstrecken zwischen zwei Autobahnanschlussstellen. Es wird zwischen den beiden Fahrzeugklassen "Lkw ab 12 t zulässigem Gesamtgewicht" und "Sonstigen Fahrzeugen" unterschieden. Obwohl momentan nur eine Benutzungsgebühr für Lkw ab 12 t zulässigem Gesamtgewicht erhoben wird, ist es mit der entwickelten Methodik möglich, fahrleistungsbezogene externe Kosten für alle Kfz angeben zu können. Die Einbeziehung externer Nutzen wird in diesem Zusammenhang andiskutiert; der Schwerpunkt liegt allerdings auf den externen Kosten. Im Rahmen der Arbeit werden zunächst Definitionen wesentlicher Terminologien dargestellt, soweit diese für das Verständnis der sich anschließenden Diskussion und Festlegung der Grundlagen der entwickelten Berechnungsmethodik notwendig erscheinen. Diese Diskussion und Festlegung umfasst die Bereiche Kostenrechnungsart, Bewertungsverfahren zur Ermittlung des Wertegerüsts, Diskontrate, zu betrachtende Kostenbereiche, Mengengerüst und Allokationsrechnung. Darauf folgend werden die betrachteten Kostenbereiche anhand vorliegender Studien und eigener Überlegungen detailliert dargestellt und das Wertegerüst bestimmt. Außerdem wird die Allokationsrechnung und das für die Berechnung heranzuziehende Mengengerüst für jeden Bereich separat vorgestellt. Anschließend wird die entwickelte Berechnungsmethodik auf ein Beispielnetz (Autobahnnetz Thüringen) angewendet. Neben der Vorstellung des Untersuchungsgebiets, der Berechnung der externen Kosten und der disaggregierten Ergebnisdarstellung wird die Einteilung des Beispielnetzes in unterschiedliche Preiskategorien auf der Grundlage der abschnittsbezogen vorliegenden Ergebnisse diskutiert, auf deren Basis die externen Kosten über Straßenbenutzungsgebühren internalisiert werden könnten. Im Rahmen einer Sensitivitätsanalyse werden einzelne Annahmen der Berechnungsmethodik bzw. Kostensätze des Wertegerüsts variiert. Die Auswirkungen dieser Variationen werden wiederum am Beispielnetz, für das erneute Kostenberechnungen vorgenommen werden, dargelegt. Abschließend werden offen gebliebene Fragestellungen und Empfehlungen für weitere Untersuchungen benannt.
Die vorliegende Arbeit beschäftigt sich mit der geometrischen Suffosionsbeständigkeit von Erdstoffen. Mit dem wahrscheinlichkeitstheoretischen Ansatz der Perkolationstheorie wurde ein analytisches Verfahren gewählt, mit dem suffosive Materialtransportprozesse modelliert und quantifiziert werden können. Mit dem verwendeten Perkolationsmodell wurde eine beliebige Porenstruktur eines realen Erdstoffes im 3-Dimensionalen modelliert. Mögliche Materialtransportprozesse innerhalb der modellierten Porenstruktur wurden anschließend simuliert. Allgemein gültige Gesetzmäßigkeiten wurden hergeleitet und Grenzbedingungen formuliert. Diese sind vom Erdstoff unabhängig und beschreiben Zusammenhänge zwischen Materialtransport und Porenstruktur. Anwendbar sind diese Ergebnisse auf homogene, isotrope und selbstähnliche Erdstoffgefüge. Aussagen über konkrete Erdstoffe können über die Transformationsmethode erfolgen. Für die Verwendung der Transformationsmethode ist vorab die relevante Porenstruktur, d. h. die Porenengstellenverteilung, zu ermitteln.
The numerical simulation of damage using phenomenological models on the macroscale was state of the art for many decades. However, such models are not able to capture the complex nature of damage, which simultaneously proceeds on multiple length scales. Furthermore, these phenomenological models usually contain damage parameters, which are physically not interpretable. Consequently, a reasonable experimental determination of these parameters is often impossible. In the last twenty years, the ongoing advance in computational capacities provided new opportunities for more and more detailed studies of the microstructural damage behavior. Today, multiphase models with several million degrees of freedom enable for the numerical simulation of micro-damage phenomena in naturally heterogeneous materials. Therewith, the application of multiscale concepts for the numerical investigation of the complex nature of damage can be realized. The presented thesis contributes to a hierarchical multiscale strategy for the simulation of brittle intergranular damage in polycrystalline materials, for example aluminum. The numerical investigation of physical damage phenomena on an atomistic microscale and the integration of these physically based information into damage models on the continuum meso- and macroscale is intended. Therefore, numerical methods for the damage analysis on the micro- and mesoscale including the scale transfer are presented and the transition to the macroscale is discussed. The investigation of brittle intergranular damage on the microscale is realized by the application of the nonlocal Quasicontinuum method, which fully describes the material behavior by atomistic potential functions, but reduces the number of atomic degrees of freedom by introducing kinematic couplings. Since this promising method is applied only by a limited group of researchers for special problems, necessary improvements have been realized in an own parallelized implementation of the 3D nonlocal Quasicontinuum method. The aim of this implementation was to develop and combine robust and efficient algorithms for a general use of the Quasicontinuum method, and therewith to allow for the atomistic damage analysis in arbitrary grain boundary configurations. The implementation is applied in analyses of brittle intergranular damage in ideal and nonideal grain boundary models of FCC aluminum, considering arbitrary misorientations. From the microscale simulations traction separation laws are derived, which describe grain boundary decohesion on the mesoscale. Traction separation laws are part of cohesive zone models to simulate the brittle interface decohesion in heterogeneous polycrystal structures. 2D and 3D mesoscale models are presented, which are able to reproduce crack initiation and propagation along cohesive interfaces in polycrystals. An improved Voronoi algorithm is developed in 2D to generate polycrystal material structures based on arbitrary distribution functions of grain size. The new model is more flexible in representing realistic grain size distributions. Further improvements of the 2D model are realized by the implementation and application of an orthotropic material model with Hill plasticity criterion to grains. The 2D and 3D polycrystal models are applied to analyze crack initiation and propagation in statically loaded samples of aluminum on the mesoscale without the necessity of initial damage definition.
Im Rahmen des sich derzeit vollziehenden Wandels von der segmentierten, zeichnungsorientierten zur integrierten, modellbasierten Arbeitsweise bei der Planung von Bauwerken und ihrer Erstellung werden Computermodelle nicht mehr nur für die physikalische Simulation des Bauwerksverhaltens, sondern auch zur Koordination zwischen den einzelnen Planungsdisziplinen und Projektbeteiligten genutzt. Die gemeinsame Erstellung und Nutzung dieses Modells zur virtuellen Abbildung des Bauwerks und seiner Erstellungsprozesse, das sog. Building Information Modeling (BIM), ist dabei zentraler Bestandteil der Planung. Die Integration der Terminplanung in diese Arbeitsweise erfolgt bisher jedoch nur unzureichend, meist lediglich in der Form einer nachgelagerten 4D-Simulation zur Kommunikation der Planungsergebnisse. Sie weist damit im Verhältnis zum entstehenden Zusatzaufwand einen zu geringen Nutzen für den Terminplaner auf. Gegenstand der vorliegenden Arbeit ist die tiefere Einbettung der Terminplanung in die modellbasierte Arbeitsweise. Auf Basis einer umfassende Analyse der Rahmenbedingungen und des Informationsbedarfs der Terminplanung werden Konzepte zur effizienten Wiederverwendung von im Modell gespeicherten Daten mit Hilfe einer Verknüpfungssprache, zum umfassenden Datenaustausch auf Basis der Industry Foundation Classes (IFC) und für das Änderungsmanagement mittels einer Versionierung auf Objektebene entwickelt.Die für die modellbasierte Terminplanung relevanten Daten und ihre Beziehungen zueinander werden dabei formal beschrieben sowie die Kompatibilität ihrer Granularität durch eine Funktionalität zur Objektteilung sichergestellt. Zur zielgenauen Extraktion von Daten werden zudem Algorithmen für räumliche Anfragen entwickelt. Die vorgestellten Konzepte und ihre Anwendbarkeit werden mittels einer umfangreichen Pilotimplementierung anhand von mehreren Praxisbeispielen demonstriert und somit deren praktische Relevanz und Nutzen nachgewiesen.