620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Refine
Document Type
- Doctoral Thesis (132) (remove)
Institute
- Institut für Strukturmechanik (ISM) (13)
- Professur Allgemeine Baustoffkunde (9)
- Professur Holz- und Mauerwerksbau (9)
- Professur Massivbau I (9)
- Professur Baumechanik (8)
- Professur Informatik im Bauwesen (8)
- F. A. Finger-Institut für Baustoffkunde (FIB) (7)
- Professur Baubetrieb und Bauverfahren (6)
- Professur Bauchemie und Polymere Werkstoffe (5)
- Professur Grundbau (5)
Keywords
- Beton (11)
- Optimierung (9)
- Finite-Elemente-Methode (8)
- Modellierung (8)
- Tragverhalten (7)
- Hydratation (5)
- Kriechen (5)
- Mikrostruktur (5)
- Stahlbeton (5)
- Bemessung (4)
- Deformationsverhalten (4)
- Dynamik (4)
- Holzbau (4)
- Mathematisches Modell (4)
- Planungsprozess (4)
- Porenbeton (4)
- Simulation (4)
- Stabilität (4)
- Stahlbetonkonstruktion (4)
- concrete (4)
- Alkali-Kieselsäure-Reaktion (3)
- BIM (3)
- Bauwerk (3)
- Bauwesen (3)
- Dynamische Belastung (3)
- Entwurf (3)
- Gips (3)
- IFC (3)
- Informationsmodell (3)
- Kooperation (3)
- Kunstharzmodifizierter Zementbeton (3)
- Kunststoffmörtel (3)
- Langzeitverhalten (3)
- Mauerwerk (3)
- Mikroskopie (3)
- Nichtlineare Finite-Elemente-Methode (3)
- Objektorientierung (3)
- Schwinden (3)
- Stahlbau (3)
- Stahlbetonbauteil (3)
- Strukturdynamik (3)
- Systemidentifikation (3)
- Tragfähigkeit (3)
- Tragwerk (3)
- Verbundbauweise (3)
- Versionsverwaltung (3)
- Waste (3)
- Zement (3)
- Zuverlässigkeit (3)
- finite element method (3)
- microstructure (3)
- system identification (3)
- Alkalisulfate (2)
- Animation (2)
- Baubetrieb (2)
- Bauplanung (2)
- Bauwerkslebenszyklus (2)
- Berechnung (2)
- Betonzusatzmittel (2)
- Bruchmechanik (2)
- Bruchverhalten (2)
- Building Information Model (2)
- Computer Supported Cooperative Work (2)
- Computersimulation (2)
- Concrete (2)
- Creep (2)
- Dauerhaftigkeit (2)
- Diskontinuumsmechanik (2)
- Eigenspannung (2)
- Elastizitätsmodul (2)
- Energiedissipation (2)
- Erdbeben (2)
- Experiment (2)
- Extremalprinzip (2)
- Fließmittel (2)
- Geschwindigkeitsverteilung (2)
- Großtafelbau (2)
- HBV (2)
- Holz (2)
- Holz-Beton-Verbund (2)
- Hybridbauweise (2)
- Imperfektion (2)
- Informationssystem (2)
- Isogeometrische Analyse (2)
- Keramik (2)
- Kontinuumsmechanik (2)
- Kunststoffadditiv (2)
- Langzeittragverhalten (2)
- Linearelastische Bruchmechanik (2)
- Mehrphasensystem (2)
- Mehrskalenanalyse (2)
- Mehrskalenmodell (2)
- Modell (2)
- Modellbildung (2)
- Mörtel (2)
- NURBS (2)
- Nichtlineare Mechanik (2)
- Nichtlineare Optimierung (2)
- Numerische Mathematik (2)
- Oberflächenbeschreibung (2)
- Oberflächenstruktur (2)
- Porosität (2)
- Quelldruck (2)
- Rauheitsparameter (2)
- Rauigkeit (2)
- Recycling (2)
- Rissbildung (2)
- Sanierung (2)
- Schale (2)
- Scheduling (2)
- Schubbewehrung (2)
- Schubtragfähigkeit (2)
- Stochastik (2)
- Straßenquerschnitt (2)
- Straßenverkehr (2)
- Strömungswiderstand (2)
- Terminplanung (2)
- Tomographie (2)
- Ultraschall (2)
- Verbund (2)
- Verteiltes System (2)
- Wirkungsmechanismen (2)
- Wärmebehandlung (2)
- Zementbeton (2)
- Zementstein (2)
- Zerstörungsfreie Werkstoffprüfung (2)
- Zuverlässigkeitstheorie (2)
- bond (2)
- building life cycle (2)
- cement (2)
- continuum mechanics (2)
- cooperation (2)
- cracking (2)
- design (2)
- durability (2)
- dynamics (2)
- earthquake (2)
- fatigue (2)
- mathematical programming (2)
- modelling (2)
- optimization (2)
- reinforced concrete (2)
- shrinkage (2)
- simulation (2)
- timber-concrete composite (2)
- velocity distribution (2)
- versioning (2)
- 2+1-roads (1)
- 40 °C Nebelkammer (1)
- 4D (1)
- 4D-Simulation (1)
- 5 (1)
- 56.81 (1)
- 60 °C-Betonversuch über Wasser (1)
- ASR (1)
- Abaqus (1)
- Abbinderegler (1)
- Abfall (1)
- Abfallwirtschaftsplan (1)
- Abfälle (1)
- Ablauf (1)
- Abstandsmessung (1)
- Adaptives Verfahren (1)
- Adaptivität (1)
- Adhäsion (1)
- Aktive Integration (1)
- Algen (1)
- Alkali-Carbonat-Reaktion (1)
- Alkali-Kieselsäure-Gel (1)
- Alkali-silica reaction (1)
- Alkalilösliche Kieselsäure (1)
- Alkalisulfat (1)
- Altbaumodernisierung (1)
- Alterungsbeständigkeit (1)
- Anomale Dispersion (1)
- Anorganische Salze (1)
- Antwortflächenverfahren (1)
- Arbeitsschutz (1)
- Arbeitsunfall (1)
- Architecture (1)
- Aridisierung (1)
- Asbestbelastung (1)
- Asbestsanierung (1)
- Aufkohlung <Metallurgie> (1)
- Aufwindkraftwerk (1)
- Ausbreitung (1)
- Ausbreitungsvorgänge (1)
- Auslaugung (1)
- Aussteifungssystem (1)
- Ausziehversuch (1)
- Autobahn (1)
- Autobahnarbeitsstellen (1)
- Autoclaved Aerated Concrete (1)
- Autoclaved Aerated Conrete (1)
- Autofrettage (1)
- Autogenous (1)
- Autokorrelationslänge (1)
- Autonomous (1)
- Außenwand (1)
- B-Spline (1)
- B-Spline Finite Elemente (1)
- B-spline (1)
- BOT projects (1)
- BSCF (1)
- Bauablauf (1)
- Bauablaufplan (1)
- Bauarbeit (1)
- Bauauftragsrechnung (1)
- Bauausführung (1)
- Bauchemie (1)
- Baudenkmal (1)
- Bauen im Bestand (1)
- Bauentwurf (1)
- Baugrundmodell (1)
- Baugrundverbesserung (1)
- Baukonstruktion (1)
- Bauleistungsfeststellung (1)
- Baumangel (1)
- Bauphysik (1)
- Bauschaden (1)
- Bausoll (1)
- Baustelle (1)
- Baustoff (1)
- Bauteil (1)
- Bauwerksinformationsmodell (1)
- Bauwerksmodell (1)
- Bauwerksmodellierung (1)
- Bayes neuronale Netze (1)
- Bayes-Entscheidungstheorie (1)
- Bayes-Inferenz (1)
- Bayesian model updating (1)
- Bayesian neural networks (1)
- Bayesische Modelaktualisierung (1)
- Bearbeitung von Ingenieuraufgaben (1)
- Behelfsverkehrsführungen (1)
- Behälter (1)
- Belastungsversuch (1)
- Belüftung (1)
- Bemessungsverfahren (1)
- Bentonit-Sand (1)
- Bentonite-sand (1)
- Benut (1)
- Benutzeroberfläche (1)
- Berechnungsverfahren (1)
- Berührungsfläche (1)
- Beschichtung (1)
- Beschleuniger (1)
- Beschädigung (1)
- Bestandsmaßnahmen (1)
- Betonbau (1)
- Betonschaden (1)
- Betonsteinherstellung (1)
- Betonverarbeitung (1)
- Betonverflüssiger (1)
- Betonzusatz (1)
- Betonzuschlag (1)
- Beulung (1)
- Bewertung (1)
- Bewertungsmethode (1)
- Bimomente (1)
- Bindemittel-Boden-Säulen (1)
- Blasenschleier (1)
- Bleilochtalsperre (1)
- Boden (1)
- Bodenaggressivität (1)
- Bodenfilter (1)
- Bodenunruhe (1)
- Bodenverbesserung <Bauwesen> (1)
- Brettschichtholz (1)
- Brettstapel (1)
- Brettstapelbau (1)
- Bruchkriterien (1)
- Bruchzähigkeit (1)
- Brücke (1)
- Brückenbau (1)
- Building Information Modeling (1)
- Building Modelling (1)
- C-S-H Phasen (1)
- C-S-H phases (1)
- CAD (1)
- CAD-Systems (1)
- CAO (1)
- CDF-Verfahren (1)
- CFD (1)
- CFRP (1)
- COM (1)
- CSCW (1)
- CSMF (1)
- Calciumsulfat (1)
- Calciumsulfat-Halbhydrat (1)
- Calciumsulfatbindemittel (1)
- Cluster-Analyse (1)
- Co-operative Work (1)
- Computer aided architectural design (1)
- Computer model (1)
- Computer science (1)
- Computermodul (1)
- Construction Product data (1)
- Constructive Design (1)
- Constructive Optimisation (1)
- Continuous-Time Markov Chain (1)
- Controlling (1)
- Cost-Benefit Analysis (1)
- Coupled models (1)
- Customizing (1)
- Cylinder-Axle-Model (1)
- Damage (1)
- Datenaustausch (1)
- Datenmodell (1)
- Dauerfestigk (1)
- Dauerstandfestigkeit (1)
- Deep Soil Stabilization (1)
- Deformation (1)
- Deformationsmessung (1)
- Dehnwellenresonanz (1)
- Delamination (1)
- Deponiebau (1)
- Design (1)
- Destratifikation (1)
- Developing countries (1)
- Direkte numerische Simul (1)
- Direkte numerische Simulation (1)
- Diskrete-Elemente-Methode (1)
- Dispersion <Welle> (1)
- Distributed computing (1)
- Domain Models (1)
- Domänenmodelle (1)
- Drehrohr (1)
- Dreidimensionale Comp (1)
- Dreistreifige Landstraße (1)
- Durchströmung (1)
- Dynamic Model Management Systems (1)
- Dynamic Schema Evolution (1)
- Dynamische Messungen (1)
- Dynamische Modellverwaltungssysteme (1)
- Dynamische Schemaevolution (1)
- Dübelleiste (1)
- E-Modul (1)
- E-modulus (1)
- Ebener Dehnungszustand (1)
- Editor (1)
- Einsatzhärten (1)
- Einzellast (1)
- Energiemethoden (1)
- Energietransport (1)
- Energieübertragung (1)
- Energy-dissipation (1)
- Enteisungsanlage (1)
- Entity-Relationship-Datenmodell (1)
- Entscheidungshilfemodell (1)
- Entscheidungsträger (1)
- Entwicklungsländer (1)
- Environment (1)
- Epizentrendichte (1)
- Erdbebenbelastung (1)
- Erdbebengefährdung (1)
- Erdbebenschaden (1)
- Ereignisgesteuerte Prozeßkette (1)
- Erhärtungsprüfung (1)
- Ermüdung (1)
- Ermüdung b (1)
- Ermüdung bei hohen Lastspielzahlen (1)
- Ersatzbrennstoffe (1)
- Ettringit (1)
- Evaluation methods (1)
- Event-driven Process Chain (1)
- Evolutionäre Algorithmen (1)
- FIB-Klimawechsellagerung (1)
- Facility-Management (1)
- Fallbeispiel (1)
- Faseroptischer Sensor (1)
- Faserverbundschalentragwerk (1)
- Fehlerfortpflanzung (1)
- Fehlstellenmodell (1)
- Feinkornbaustahl (1)
- Ferri (1)
- Festbett (1)
- Festigkeit (1)
- Festkörpermechanik (1)
- Festmörtel (1)
- Filling moulds with fresh concrete (1)
- Filter (1)
- Finite Element Method (1)
- Finite Element Model (1)
- Finite-Volumen-Methode (1)
- Fließgewässer (1)
- Fließverhalten (1)
- Flächenverbund (1)
- Flüssigkeit-Bauwerk-Interaktion (1)
- Flüssigkeitsviskosität (1)
- Form optimization (1)
- Formabweichung (1)
- Formoptimierung (1)
- Formänderungsenergie (1)
- Fracture (1)
- Fracture Toughness (1)
- Fragmentierung (1)
- Fraktographie (1)
- Freeform (1)
- Freiform (1)
- Freistrahlen (1)
- Frischmörtel (1)
- Frost-Tau-Widerstand (1)
- Frostbeständigkeit (1)
- Frostwiderstand (1)
- Fuge (1)
- Functional design (1)
- Fügen (1)
- Füllen der Form mit Frischbeton (1)
- GFK (1)
- GFRP (1)
- Gabellagerung (1)
- Gebäude (1)
- Gebäudesimulation ESP-r (1)
- Gefährdung (1)
- Gefüge <Werkstoffkunde> (1)
- Gekoppelte Modelle (1)
- Generierung (1)
- Geometric Modeling (1)
- Geostatistik (1)
- Geotechnik (1)
- Geotextilien (1)
- Geschwindigkeit (1)
- Geschwindigkeitsmessung (1)
- Gesteinskörnungen (1)
- Gewässersanierung (1)
- Gips-Zement-Puzzolan-Bindemittel (1)
- Gipstreiben (1)
- Gitterfreie Methode (1)
- Glas (1)
- Glasfaserverstärkter Kunststoff (1)
- Glass (1)
- Grenzlast (1)
- Grenzzustand (1)
- Grenzzustandsanalyse (1)
- Groupware (1)
- Großtafelbauweise (1)
- H/V-Methode (1)
- Haftverbund (1)
- Haufwerksporiger Beton (1)
- Healing (1)
- Hochdruck (1)
- Hochofenzement (1)
- Holzbauteil (1)
- Holzrahmenbau (1)
- Holzrahmenbauwände (1)
- Holzstützen (1)
- Holztafelbau (1)
- Holzverbindung (1)
- Homogenisieren (1)
- Homogenisierung (1)
- Hydratationswärme (1)
- Hypertrophie (1)
- Immobilie (1)
- Immobilienwirtschaft (1)
- Impedanzfunktion (1)
- Indikator (1)
- Inferenzstatistik (1)
- Informationsmanagement (1)
- Informationssuche (1)
- Injektion (1)
- Instandhaltung (1)
- Instandhaltungsplanung (1)
- Instandsetzung (1)
- Integration (1)
- Interkristalline Korrosion (1)
- Internalisierung <Wirtschaft> (1)
- Interpartikuläre Wechselwirkungen (1)
- Inversionsalgorithmus (1)
- Inversionstheorie (1)
- Isogeometric Analysis (1)
- Joint type (1)
- Junger Beton (1)
- Kalk-Boden-Säulen (1)
- Kalkulation (1)
- Keramischer Baustoff (1)
- Klassieren (1)
- Kleben (1)
- Klebtechnologie (1)
- Klimaschutz (1)
- Klimawechsellagerung (1)
- Klinker (1)
- Klüftung (1)
- Knoten (1)
- Knotenmodell (1)
- Kohlenstofffaserverstärkter Kunststoff (1)
- Kohäsion (1)
- Kollaboration (1)
- Kommunikationsdienst (1)
- Kommunikationstechnik (1)
- Kompressibilität (1)
- Konsens (1)
- Konstruktion (1)
- Konstruktive Optimierung (1)
- Konstrutkiver Entwurf (1)
- Kontaktwechselwirkung (1)
- Kontinuierliche Simul (1)
- Kontinuitaetsbedingungen (1)
- Konvektion (1)
- Konzessionen (1)
- Kooperatives Arbeiten (1)
- Kornzerfall (1)
- Korrosionsgeschwindigkeit (1)
- Korrosionsprüfung (1)
- Kosten-Nutzen-Analyse (1)
- Kostenrechnung (1)
- Kraftschluss (1)
- Kriging (1)
- Kunststoffbeton (1)
- Kunststofffilme (1)
- Kunststoffkleben (1)
- Kurzzeit-Kriechen (1)
- LSCF (1)
- Lack of building (1)
- Langzeitverzögerer (1)
- Laser-Ultraschall (1)
- Laserschweißen (1)
- Lasertechnologie (1)
- Laservibrometer (1)
- Latentwärmespeicher (1)
- Lattice Grids (1)
- Laufzeit (1)
- Lebenszyklus (1)
- Lebenszyklusbetrachtungen (1)
- Leistungsmeldung (1)
- Leitung (1)
- Lichtlimitation (1)
- Lime Columns (1)
- Limit Atate Analysis (1)
- Logit-Modell (1)
- Lösungsanalytik (1)
- Lösungsverfahren (1)
- MAG-Schweißen (1)
- MFPA Weimar (1)
- Magnesiumsulfat (1)
- Maintenance (1)
- Makrosimulation (1)
- Markov-Kette mit stetiger Zeit (1)
- Materialermüdung (1)
- Mathematical Programming (1)
- Mauermörtel (1)
- Mechanik (1)
- Mechanisches Versagen (1)
- Mehrachsige Beanspruchung (1)
- Mehragentensystem (1)
- Mehrgitterverfahren (1)
- Meshless method (1)
- Meso-Scale (1)
- Metallkleben (1)
- Metallographie (1)
- Metaphosphat (1)
- Methoden und Verfahren (1)
- Microstructure (1)
- Mikro-Scale (1)
- Mikrosimulation (1)
- Mineralischer Rohstoff (1)
- Mixed Mode (1)
- Modale Parameter (1)
- Modellkalibrierung (1)
- Modezuordung (1)
- Monte Carlo method (1)
- Monte Carlo simulation (1)
- Monte-Carlo Simulation (1)
- Monte-Carlo-Integration (1)
- Monte-Carlo-Methode (1)
- Monte-Carlo-Simulation (1)
- Morinol (1)
- Multiscale modeling (1)
- Multiskalenmodellierung (1)
- Nachbeulverhalten (1)
- Nachfragerisiko (1)
- Nachhaltigkeit (1)
- Natriumchlorid (1)
- Neuronales Netz (1)
- Nichtlineare Berechnung (1)
- Nichtlineare Kon (1)
- Nichtlineare Stabilitätstheorie (1)
- Nichtlineares System (1)
- Non-linear buckling (1)
- Nonlinear Programming (1)
- Numerische Berechnung (1)
- Numerische Strömungsmechanik (1)
- Numerisches Verfahren (1)
- Nutzeroberfläche (1)
- Nutzungsdauer (1)
- Oberflächenabdichtung (1)
- Oberflächenspannung (1)
- Oberflächenvorbereitung (1)
- Object-oriented programming (1)
- Optimal Matching Technik (1)
- Optimal Matching Technique (1)
- Optimization (1)
- Organisationsstruktur (1)
- PCM-Putz (1)
- PCM-plaster (1)
- Parameteranalyse (1)
- Parameteridentif (1)
- Parameteridentification (1)
- Parametric Design (1)
- Parametrische Optimierung (1)
- Parametrischer Entwurf (1)
- Paramter Identification (1)
- Partialmodelle (1)
- Partikel-Schwarm-Optimierung (1)
- Perkolationstheorie (1)
- Perowskit (1)
- Perpendicular-to-grain loaded Connections (1)
- Pfahl (1)
- Pfahlgründung (1)
- Pfahlprobebelastung (1)
- Phase field model (1)
- Phasenumwandlung (1)
- Phasenübergangsmaterialien (1)
- Phosphonocarbonsäure (PBTC) (1)
- Phosphor (1)
- Pile Foundation (1)
- Pile Load Test (1)
- Planning process (1)
- Planung (1)
- Plastizität (1)
- Plastizitätstheorie (1)
- Platte (1)
- Polykristall (1)
- Polymer modification (1)
- Polymeradsorption (1)
- Polymermodifizierung (1)
- Porenlösung (1)
- Porenwasser (1)
- Porenwasserdruck (1)
- Portlandkalksteinzement (1)
- Portlandzement (1)
- Probabilistik (1)
- Produktinformation (1)
- Produktlebenszyklus (1)
- Profilstahl (1)
- Prognosemodell (1)
- Prognosequalität (1)
- Prävention (1)
- Prüftechnik (1)
- Prüfverfahren (1)
- Public Private Partnership (1)
- Push-over Analyse (1)
- Pyrolyse (1)
- Qualitätssicherung (1)
- Quarz (1)
- Quarzglas (1)
- Quellen (1)
- Queranschluß (1)
- Querdehnzahl (1)
- Querkraft (1)
- Querkraftbewehrung (1)
- Querkrafttragfähigkeit (1)
- Querschnittsanalyse (1)
- RDF (1)
- RQ15 (1)
- Radar (1)
- Radar <Druckschrift> (1)
- Rahmenecke (1)
- Rahmentragwerk (1)
- Rehabilitation (1)
- Reinforced Concrete (1)
- Reinforced concrete (1)
- Reliability (1)
- Reliability Theory (1)
- Reorganisation (1)
- Restbeton (1)
- Resttragfähigkeit (1)
- Revitalisierung (1)
- Risikoallokation (1)
- Risikomanagement (1)
- Risikoverteilung (1)
- Rissbreite (1)
- Rissentwicklung (1)
- Risssimulation (1)
- Rohrleitung (1)
- Rückbeton (1)
- SVB (1)
- Safety of work (1)
- Salzmischungen (1)
- Sauerstoff (1)
- Scale-Up (1)
- Schaden (1)
- Schadensanalyse (1)
- Schadensdiagnose (1)
- Schadensmechanik (1)
- Schadenspotential (1)
- Schallemissionsanalyse (1)
- Schaum (1)
- Schmale Luzin (1)
- Schnittgrößenumlagerungen (1)
- Schweinegülle (1)
- Schweißen (1)
- Schweißverbindung (1)
- Schwindisotherme (1)
- Schwindmechanismus (1)
- Schwindreduktion (1)
- Schwindreduzierer (1)
- Schwingung (1)
- Schwingungsanalyse (1)
- Schädigung (1)
- Schädigungsindikator (1)
- Schüttung (1)
- Sediment (1)
- Seerestaurierung (1)
- Segmentierung (1)
- Sekundärrohstoff (1)
- Selbstheilung (1)
- Selbstüberwachung (1)
- Sequenzanalyse <Soziologie> (1)
- Shear Capacity (1)
- Shear Strength (1)
- Sicherheit (1)
- Sicherheitstheorie (1)
- Sickerwasser (1)
- Siedlungswasserwirtschaft (1)
- Simulationsprozess (1)
- Software-Architektur (1)
- Software-Komponente (1)
- Softwareentwicklung (1)
- Sonnenenergie (1)
- Sonnenkollektor (1)
- Sorptionsisotherme (1)
- Sorptionswärme (1)
- Soziale Kosten (1)
- Spaltdruck (1)
- Spannungsintensitätsfaktor (1)
- Spannungszustand (1)
- SrMnO3 (1)
- Stability behavior (1)
- Stabnetz (1)
- Stahlbeton-Rahmenbauwerke (1)
- Stahlbetonbau (1)
- Stahlkonstruktionen (1)
- Standard-Software (1)
- Standardisierung (1)
- Standardsoftware (1)
- Standsicherheit (1)
- Statics (1)
- Statik (1)
- Statistik (1)
- Statistischer Größeneinfluss (1)
- Staumauer (1)
- Steel frames (1)
- Stehendes Gewässer (1)
- Steifigkeit (1)
- Steifigkeits-Degradation (1)
- Steifigkeitsdegradation (1)
- Stochastische Analysis (1)
- Stoffgesetz (1)
- Strahlung (1)
- Strain Energy (1)
- Straßenbenutzungsgebühr (1)
- Straßenbrücke (1)
- Straßennetz (1)
- Straßensektor (1)
- Stress Intensity Factor (1)
- Strukturbildung (1)
- Strukturmechanik (1)
- Strukturänderung (1)
- Struvite (1)
- Strömungsfeld (1)
- Stuckgips (1)
- Stufen-Schwellen-Sequenzen (1)
- Stuttgart / Sonderforschungsbereich Rechnergestützte Modellierung und Simulation zur Analyse (1)
- Suffosion (1)
- Super Healing (1)
- Suspendieren (1)
- Suspension (1)
- Suspensionsanalytik (1)
- Taumittel (1)
- Technische Überwachung (1)
- Teilsättigung (1)
- Teilung (1)
- Temperatur (1)
- Temperaturfeld (1)
- Tensiometer (1)
- Thermische Belastung (1)
- Thermische Energiespeicherung (1)
- Thermochemische Wärmespeicherung (1)
- Thermodynamik (1)
- Timber (1)
- Ton <Geologie> (1)
- Traffic revenue risk (1)
- Traglast (1)
- Tragwerksplanung (1)
- Tragwerksverstärkung (1)
- Transparenz (1)
- Transportgleichung (1)
- Träger (1)
- Typenbildung (1)
- Ultraschall-Laserverfahren (1)
- Ultraschallmesstechnik (1)
- Unfallursache (1)
- Unfallverhütung (1)
- Ungesättigte Zone (1)
- Unsaturated soil (1)
- Unsicherheit (1)
- Unsicherheitsanalyse (1)
- Untergrundklassifikation (1)
- Variationsprinzip (1)
- Variographie (1)
- Verbindungskoeffizienten (1)
- Verbindungstechnik (1)
- Verbunddeckenplatten (1)
- Verbunddokument (1)
- Verbundkonstruktionen (1)
- Verbundmittel (1)
- Verbundverhalten (1)
- Verflüssigung (1)
- Verglasung (1)
- Vergärung (1)
- Verkehrsablauf (1)
- Verkehrsmengenrisiko (1)
- Verkehrspolitik (1)
- Verkehrsqualität (1)
- Verkehrstechnik (1)
- Verkehrsverhalten (1)
- Verkehrswirtschaft (1)
- Verknüpfungen (1)
- Versagensmechanismen (1)
- Version control (1)
- Versionierung (1)
- Versuchsmethode (1)
- Verteilte Anwendungen (1)
- Verteilte Modelle (1)
- Vertrauen (1)
- Virtuelle Realität (1)
- Virtuelles Unternehmen (1)
- Visualisierung (1)
- Vollholz (1)
- Vorspannung (1)
- Wachstumshemmung (1)
- Warping moments (1)
- Warping stiffness (1)
- Wasserglas (1)
- Wasserhaushalt (1)
- Wasserlinsendecken (1)
- Wasserversorgung (1)
- Wasserwirtschaft (1)
- Waste management concept (1)
- Wavelet (1)
- Wechselwirkung (1)
- Wellenausbreitung (1)
- Werthandlungsbereich (1)
- Werthandlungsmodell (1)
- Wertstoff (1)
- Wirbelringe (1)
- Wirkmechanismus (1)
- Wirtschaftlichkeit (1)
- Woelbsteifigkeit (1)
- Wohnhäuser in Stahlbauweise (1)
- Wohnungsbau (1)
- Wohnungsbestand (1)
- Wohnungsmodernisierung (1)
- Wohnungswirtschaft (1)
- Wärmeeinflusszone (1)
- Wärmeverlust (1)
- Wärmeübertragung (1)
- Young's modulus (1)
- Zementhydratation (1)
- Zufallsfeld (1)
- Zugfestigkeit (1)
- Zugversuch (1)
- Zusatzmittel (1)
- Zuverlässigkeit in der Bauausführung (1)
- Zwangsspannung (1)
- Zweischaliges Mauerwerk (1)
- Zylinder-Achsen-Modell (1)
- accident reasons (1)
- acid resistant coating material (1)
- action mechanism (1)
- adaptive simulation (1)
- adaptivity (1)
- adhesion (1)
- adhesive bonding (1)
- admixture (1)
- aerated concrete (1)
- aged hemihydrate plasters (1)
- aggregate (1)
- alkali silicate gels (1)
- alkali silicate reaction (1)
- alkali-carbonate reaction (1)
- alkali-silica-reaktion (1)
- anaerobic digestion (1)
- atomistic simulation methods (1)
- autofrettage (1)
- autogenes Schwinden (1)
- autogenous shrinkage (1)
- automation (1)
- biaxial – sand (1)
- biaxial-sand (1)
- bridge (1)
- building Information model (1)
- building damage (1)
- building information modelling (1)
- building model (1)
- building modeling (1)
- building modelling (1)
- calcium sulfate hemihydrate (1)
- case study (1)
- ceramics (1)
- characterization of surface (1)
- civil engineer . active integration (1)
- climate storage (1)
- cluster analysis (1)
- cohesion (1)
- communications service (1)
- composite (1)
- composite elements (1)
- compressibility (1)
- computer aides optimization (1)
- concentrated load (1)
- concrete admixture (1)
- conduction (1)
- connection coefficients (1)
- connector (1)
- construction (1)
- construction chemicals (1)
- construction schedule (1)
- continuum damage mechanics (1)
- continuum mechanic (1)
- convection (1)
- cost estimation (1)
- course of events (1)
- crack mitigation (1)
- crack simulation (1)
- cracking of concrete (1)
- creep (1)
- cross-section analysis (1)
- damage (1)
- damage indicator (1)
- damage potential (1)
- decision (1)
- delamination (1)
- demand risk (1)
- deviatoric (1)
- deviatorisch (1)
- discontinuum mechanic (1)
- disjoining pressure (1)
- diskontinuum mechanics (1)
- dissimilarity measures (1)
- dissipation of energy (1)
- distributed applications (1)
- distributed models (1)
- drying-wetting (1)
- dynamic behavior (1)
- early project phase (1)
- earthquake damage (1)
- editor (1)
- effective properties (1)
- einschichtige Elemente (1)
- elastic properties (1)
- elastische Eigenschaften (1)
- elastische Parameter (1)
- energy-dissipation (1)
- engineer-technical integration (1)
- epicenter density (1)
- evolutionary algorithms (1)
- existing buildings (1)
- external costs (1)
- fachliche Integration (1)
- failure (1)
- faserverstärkte Kunststoffe (1)
- fault diagnosis (1)
- fiber optical Sensor (1)
- fiber reinforced polymer (1)
- fiber-reinforced plastics (1)
- fiber-reinforced shell structures (1)
- finite element (1)
- finite elements (1)
- flow resistance (1)
- fluidity (1)
- flussgebietsorientierte Bewirtschaftung (1)
- force-fit (1)
- fracture behavior (1)
- freeze-thaw resistance (1)
- freeze-thaw-resistance (1)
- fresh mortar (1)
- frost resistance (1)
- frühe Planungsphasen (1)
- generation (1)
- geometrical nonlinear (1)
- geostatistic (1)
- gravel-bed rivers (1)
- group document (1)
- guidance in construction (1)
- gypsum (1)
- gypsumcristalline (1)
- hardened mortar (1)
- hazard assessment (1)
- heat of hydration (1)
- high-strenght concrete (1)
- hochfester Beton (1)
- homogene heterogene Strukturcharakterisierung (1)
- housing stock (1)
- hydration (1)
- hydromechanische Prozesse (1)
- hygro-mechanical stability (1)
- hygro-mechanische Instabilität (1)
- hygrothermal long-time load-bearing performance (1)
- hygrothermisches Langzeittragverhalten (1)
- impedance function (1)
- indicator (1)
- individual roughness structure (1)
- individuelle Rauheitsstruktur (1)
- information management (1)
- information system (1)
- information technology (1)
- innere relative Feuchte (1)
- intelligente Materialien (1)
- interactive (1)
- interaktiv (1)
- intergranular damage (1)
- internal relative humidity (1)
- inversion procedure (1)
- inversion theorie (1)
- isogeometric analysis (1)
- job description (1)
- joining (1)
- joint (1)
- jointed rock (1)
- joints (1)
- k-Wert (1)
- keramische Masse (1)
- koiter approximation (1)
- kriging (1)
- laminated timber (1)
- landfill cover lining system (1)
- large panel buildings (1)
- latent heat storage (1)
- leakages (1)
- level-of-service (1)
- life cycle costs (1)
- linear elastic fracture mechanics (1)
- links (1)
- liquid storage tank (1)
- liquid vicosity (1)
- liquid-structure-interaction (1)
- load-test (1)
- local approach (1)
- logit-model (1)
- long-term retarder (1)
- long-time-performance (1)
- lösbare Verbindung (1)
- macroscale (1)
- masonry (1)
- material properties (1)
- materialgerecht (1)
- mathematical modelling (1)
- mechanische Effizienz (1)
- mehrphasig (1)
- mehrschichtige Elemente (1)
- mesoscale (1)
- metaphosphate (1)
- methodes and procedures (1)
- microscopy (1)
- microtremors (1)
- modal parameters (1)
- mode pairing (1)
- model updating (1)
- modulares Bauwerk (1)
- mortar method (1)
- motars (1)
- multigrid (1)
- multiphase (1)
- multiscale method (1)
- nachgeordnetes Straßennetz (1)
- natürliche Fließgewässer (1)
- nichtlineare Optimierung (1)
- niederzyklisch (1)
- non-destructive (1)
- non-destructive test procedures (1)
- non-linear optimisation (1)
- nonlinear creep (1)
- nonlinear finite elements (1)
- numeric analysis (1)
- numerical modelling (1)
- numerical simulation (1)
- object splitting (1)
- object versioning (1)
- object-orientation (1)
- objektoriertes Paradigma (1)
- operative mechanisms (1)
- optimal sensor positions (1)
- optimale Sensorpositionierung (1)
- parameter identification (1)
- parametric design (1)
- parametric optimization (1)
- partial models (1)
- percolation theory (1)
- phase change materials (1)
- phosphonocarbon acid (PBTC) (1)
- phosphorus (1)
- physical nonlinear (1)
- physically and geometrically nonlinear computation (1)
- physically non-linear analysis (1)
- physikalisch nichtlinear (1)
- pig manure (1)
- plane-strain conditions (1)
- polymer cement concrete (1)
- polymer concrete (1)
- pore solution (1)
- portland limestone cement (1)
- poröse Trägermaterialien (1)
- post-buckling analysis (1)
- prestress (1)
- prevention (1)
- probabilistics (1)
- processing of engineering tasks (1)
- pull-out (1)
- push-over analysis (1)
- quadratical optimization (1)
- quality assurance (1)
- quasicontinuum method (1)
- radiation (1)
- reinforced-concrete (1)
- reinforcement (1)
- reliability assessment (1)
- reliability in construction processes (1)
- remaining load capacitiy (1)
- residential buildings (1)
- residual stress (1)
- response surface method (1)
- restrained stress (1)
- revitalisation (1)
- risk allocation (1)
- road bridge (1)
- road pricing (1)
- roughness (1)
- roughness parameter (1)
- räumliche Anfragesprache (1)
- scale transition (1)
- scheduling (1)
- schwindreduzierendes Zusatzmittel (1)
- segmentation algorithm (1)
- seismic hazard (1)
- selective sensitivity (1)
- selektive Sensitivität (1)
- self-checking (1)
- semispace model (1)
- sequence (1)
- set regulator (1)
- short-term creep (1)
- shrinkage reducer (1)
- shrinkage reducing admixtures (1)
- shrinkage reducing agents (1)
- shrinkage reduction (1)
- silikatkeramische Masse (1)
- similarity measurement (1)
- site classification (1)
- slab (1)
- slip-block-test (1)
- slow-late-aggregate (1)
- software architecture (1)
- software component (1)
- soil-structure-interaction (1)
- solar energy (1)
- sommerlicher Wärmeschutz (1)
- spatial query (1)
- spherical (1)
- sphärisch (1)
- stability theory (1)
- standard (1)
- standard software (1)
- statistic size effect (1)
- steel (1)
- steel structures (1)
- step-pool sequences (1)
- stiffness-degradation (1)
- stirrups (1)
- stochastic (1)
- stochastics (1)
- strain (1)
- strategies (1)
- strength (1)
- stress (1)
- structural design (1)
- structural dynamics (1)
- structural reliability (1)
- substitute fuel (1)
- suffusion (1)
- superplasticizer (1)
- surface structures (1)
- sustainability (1)
- swelling (1)
- swelling pressure (1)
- synergy (1)
- säurefeste Beschichtungen (1)
- technical management (1)
- technische Nutzungsdauer (1)
- temperature (1)
- tensile strength (1)
- tension-stiffening (1)
- test-method (1)
- textural changes (1)
- thermal building simulation (1)
- thermal glazings (1)
- thermal load (1)
- thermal protection (1)
- thermodynamics (1)
- tiefgründige Bodenstabilisierung (1)
- timber (1)
- timber concrete composite (1)
- timber structure (1)
- timber-composite structures (1)
- toll road concessions (1)
- traffic flow (1)
- transformation plasticity (1)
- transformationsinduzierte Plastizität (1)
- transport of energy (1)
- travel behavior (1)
- typology (1)
- ultrasonic laser technique (1)
- uncertain data (1)
- uniaxial (1)
- unsaturation (1)
- upwind power plant (1)
- user interface (1)
- value activity model (1)
- variographie (1)
- virtual experiment (1)
- virtueller Versuch (1)
- water balance (1)
- water-glass (1)
- wave field dispersion (1)
- wave propagation (1)
- wavelet (1)
- weakest-link model (1)
- welding (1)
- wood-frame construction (1)
- wood-framed shear walls (1)
- wooden columns (1)
- work accidents (1)
- young concrete (1)
- zerstörungsfrei (1)
- zyklisch (1)
- µ-3D Computertomografie (1)
Verkehrsmengenrisiko bei PPP-Projekten im Straßensektor - Determinanten effizienter Risikoallokation
(2010)
Trotz weltweit umfangreichen Erfahrungen mit Public Private Partnership Projekten im Straßensektor bleibt der Umgang mit dem Verkehrsmengenrisiko für die Projektbeteiligten eine Herausforderung. Die Arbeit widmet sich daher der wesentlichen Fragestellung nach einer effizienten Allokation dieses Risikos, dem nicht weniger Bedeutung zukommt als für den gesamtwirtschaftlichen Erfolg eines Straßenkonzessionsprojektes eine entscheidende Rolle zu spielen. Untersucht werden zunächst die Charakteristika des Verkehrsmengenrisikos mit seinen umfänglichen Einflussfaktoren. Anschließend werden die in der Praxis zur Anwendung kommenden Vertragsmodelle zur Bewirtschaftung von Straßeninfrastruktur dargestellt und analysiert, wie in den einzelnen Modellen Verkehrsmengenrisiko auf die verschiedenen Vertragspartner verteilt wird. Auf Basis dieser Grundlagen wird ein kriteriengestützter Analyserahmen entwickelt, der die Effizienz unterschiedlicher Risikoallokationen zwischen den Vertragspartner bewertet. Dabei werden einerseits die effizienzbeeinflussenden Eigenschaften der potentiellen Risikoträger eines PPP-Projektes berücksichtigt als auch die die effizienzbeeinflussenden Wirkungen der unterschiedlichen Vertragsmodelle. Aus den Erkenntnissen dieser Analyse werden letztlich Handlungs- und Gestaltungsempfehlungen zum Umgang mit dem Verkehrsmengenrisiko abgeleitet.
Entsprechend des jeweiligen Erhaltungszustandes einer Straße müssen immer wieder Arbeitsstellen eingerichtet werden, um Baumaßnahmen zum Substanzerhalt der Straßeninfrastruktur durchzuführen. Die vorliegende Arbeit befasst sich mit solchen Arbeitsstellen an vierstreifigen Autobahnen. Für vierstreifige Autobahnen ergibt sich aus den bestehenden Regelwerken und Anforderungen des Straßenbaulastträgers die Erfordernis, möglichst Behelfsverkehrsführungen der Form 4+0 einzurichten. Ferner sollen die beiden Fahrtrichtungen zur Erhöhung der Verkehrssicherheit möglichst durch transportable Schutzeinrichtungen getrennt werden. Unter Berücksichtigung der Mindestwerte die in den gültigen Regelwerken für Behelfsfahrstreifen genannt werden, ergibt sich für eine Behelfsverkehrsführung der Form 4+0, mit Trennung des Gegenverkehrs durch transportable Schutzeinrichtungen, eine Mindestbreite von 12,0 m, die als befestigte Fläche zur Verfügung stehen muss. In der Praxis haben die Richtungsfahrbahnen von vierstreifigen Autobahnen in der Regel Breiten der befestigten Fläche von deutlich weniger als 12,0 m. Daher werden in der Baupraxis Kompromisslösungen eingesetzt, die im wesentlichen darauf beruhen, entweder eine andere Verkehrsführung als 4+0 einzusetzen, auf die Trennung mittels transportabler Schutzeinrichtung zu verzichten, die Fahrstreifenbreiten unter das geforderte Mindestmaß zu verringern oder die Breite der befestigten Fläche im Vorfeld der Maßnahme baulich zu verbreitern. Die vorliegende Arbeit nimmt sich dieser Problematik an. Hierzu werden die bestehenden Anforderungen und Randbedingungen analysiert, die hieraus resultierenden Konflikte beschrieben und die in der Praxis eingesetzten Varianten, Kombinationen aus Behelfsfahrstreifenbreiten, Verkehrsführung und Trennungssystem, vergleichend bewertet. Dieser Vergleich erfolgt für verschiedene Breiten der Richtungsfahrbahnen und für verschiedene Verkehrsstärken. Aufgabe des Vergleichs war es, die Variante herauszufinden, welche unter bestimmten Randbedingungen (wie z. B. Verkehrsstärke, Höhe der Baukosten) die niedrigsten volkswirtschaftlichen Gesamtkosten aufweist. Als Vergleichsverfahren wurde ein volkswirtschaftlicher Ansatz gewählt. Für die Durchführung des volkswirtschaftlichen Vergleiches wurde zunächst analysiert, auf welche bewertungsrelevanten Größen sich die untersuchten Varianten auswirken. Hierbei stellten sich die Größen Investitionskosten, Arbeitsstellendauer, Fahrzeuggeschwindigkeiten und Unfallkosten als die relevanten Einflussgrößen dar. Die Wirkungen der eingesetzten Varianten auf die relevanten Einflussgrößen mussten im Rahmen der vorliegenden Arbeit quantifiziert werden. Die Quantifizierung der Wirkungen erfolgte daher weitgehend im Rahmen der vorliegenden Arbeit, bestehende Kenntnislücken konnten durch die vorliegende Arbeit verkleinert werden. Als Grundlage zur Quantifizierung der Wirkungen konnte dabei auf vorhandene empirische Daten und Auswertungen zurückgegriffen werden. Zur Absicherung der, durch das volkswirtschaftliche Bewertungsverfahren erzielten Berechnungsergebnisse, wurden in der Berechnung maßgebliche Kenngrößen variiert. Hierdurch konnten Aussagen zur Sensitivität der Berechnungsergebnisse erzielt werden. Die Arbeit zeigt, dass ein Vergleich der betrachteten Varianten mit dem in der Arbeit angepassten Bewertungsverfahren möglich ist. Für die untersuchten Varianten wurden jeweils deren volkswirtschaftliche Vor- und Nachteile herausgearbeitet und aufgezeigt, aus welchen der betrachteten Felder (Verkehrsablauf, Verkehrssicherheit, Kosten, Umwelt) diese Vor- und Nachteile resultieren. Die erzielten Berechnungsergebnisse wurden dahingehend ausgearbeitet, dass Einsatzempfehlungen für die einzelnen Varianten gegeben werden konnten. Dabei wurden jeweils Empfehlungen für vier verschiedene Breiten der befestigten Fläche, drei unterschiedliche Baukostenansätze und sechs verschiedene Verkehrsstärken gegeben. Durch die Arbeit konnten einige bislang vorhandene Kenntnislücken geschlossen bzw. verkleinert werden, dies betrifft z. B. die Darstellung der Zusammenhänge zwischen Behelfsverkehrsführung, Baukosten und Bauzeit, die Ermittlung von Unfallkenngrößen für verschiedene Verkehrsführungen und Behelfsfahrstreifenbreiten, die Ermittlung von Verkehrsstärke-Geschwindigkeitsbeziehungen für verschiedene Verkehrsführungen und Behelfsfahrstreifenbreiten sowie die Ableitung von Mindestbreiten von Behelfsfahrstreifen. Durch die Arbeit konnte auch aufgezeigt werden, dass in einigen Teilbereichen noch weiterer Forschungsbedarf besteht.
Die Arbeit gliedert sich in drei Komplexe. Der erste Komplex umfaßt Voruntersuchungen zum Ultraschallmeßsystem hinsichtlich Sendefrequenzen, Ankoppeldruck und gerätespezifischen Verzögerungszeiten. Zur schrittweisen Entwicklung eines berührungslos arbeitenden Ultraschallverfahrens werden Grundlagenuntersuchungen zur laserinduzierten Anregung von Ultraschallwellen und zur berührungslosen Signalerfassung mittels Laservibrometer durchgeführt. Der zweite Komplex beinhaltet die Untersuchung von Gefügeschädigungen durch Frostangriff. Als Kennwert der inneren Schädigung wird die Änderung des dynamischen E-Moduls durch Anwendung von akustischen Meßverfahren (z.B. Dehnwellenresonanzverfahren) bestimmt. Der Erfassung und Visualisierung des Schädigungsgradienten wird besondere Bedeutung beigemessen. Der dritte Komplex umfaßt die Untersuchung der Gefügeentwicklung während der Hydratation von Normalbetonen zur Bestimmung der Erhärtungsdruckfestigkeit mit dem Ultraschallmeßsystem CONSONIC 60. Ausgewertet werden kontinuierliche und diskontinuierliche Impulslaufzeitmessungen unter Einbeziehung der Betonrezeptur.
The nonlinear behavior of concrete can be attributed to the propagation of microcracks within the heterogeneous internal material structure. In this thesis, a mesoscale model is developed which allows for the explicit simulation of these microcracks. Consequently, the actual physical phenomena causing the complex nonlinear macroscopic behavior of concrete can be represented using rather simple material formulations. On the mesoscale, the numerical model explicitly resolves the components of the internal material structure. For concrete, a three-phase model consisting of aggregates, mortar matrix and interfacial transition zone is proposed. Based on prescribed grading curves, an efficient algorithm for the generation of three-dimensional aggregate distributions using ellipsoids is presented. In the numerical model, tensile failure of the mortar matrix is described using a continuum damage approach. In order to reduce spurious mesh sensitivities, introduced by the softening behavior of the matrix material, nonlocal integral-type material formulations are applied. The propagation of cracks at the interface between aggregates and mortar matrix is represented in a discrete way using a cohesive crack approach. The iterative solution procedure is stabilized using a new path following constraint within the framework of load-displacement-constraint methods which allows for an efficient representation of snap-back phenomena. In several examples, the influence of the randomly generated heterogeneous material structure on the stochastic scatter of the results is analyzed. Furthermore, the ability of mesoscale models to represent size effects is investigated. Mesoscale simulations require the discretization of the internal material structure. Compared to simulations on the macroscale, the numerical effort and the memory demand increases dramatically. Due to the complexity of the numerical model, mesoscale simulations are, in general, limited to small specimens. In this thesis, an adaptive heterogeneous multiscale approach is presented which allows for the incorporation of mesoscale models within nonlinear simulations of concrete structures. In heterogeneous multiscale models, only critical regions, i.e. regions in which damage develops, are resolved on the mesoscale, whereas undamaged or sparsely damage regions are modeled on the macroscale. A crucial point in simulations with heterogeneous multiscale models is the coupling of sub-domains discretized on different length scales. The sub-domains differ not only in the size of the finite elements but also in the constitutive description. In this thesis, different methods for the coupling of non-matching discretizations - constraint equations, the mortar method and the arlequin method - are investigated and the application to heterogeneous multiscale models is presented. Another important point is the detection of critical regions. An adaptive solution procedure allowing the transfer of macroscale sub-domains to the mesoscale is proposed. In this context, several indicators which trigger the model adaptation are introduced. Finally, the application of the proposed adaptive heterogeneous multiscale approach in nonlinear simulations of concrete structures is presented.
Der Zusammenhang zwischen Schädigung und der Veränderung dynamischer und statischer Eigenschaften von Stahlbetonstrukturen wird untersucht. Auf der einen Seite stehen die statischen Lastversuche in Verbindung mit dynamischen Experimenten an Stahlbetonstrukturen (Platten und Balken). Auf der anderen Seite wird für die Balkenstrukturen ein nichtlineares Stochastisches Finite Elemente Modell entwickelt. Dies berücksichtigt zufällige Material- und Festigkeitseigenschaften durch räumlich korrelierte Zufallsfelder. So werden stochastische Rissentwicklungen für den Stahlbeton simuliert. Für die Berechnungen vieler Realisationen und damit verschiedenartige "Lebensgeschichten" einer Struktur wird als Monte Carlo Methode Latin Hypercube Sampling verwendet. Die Auswertung der Strukturantworten für die Lastgeschichte zeigt den Einfluss der zufälligen Eigenschaften auf die Schädigungsentwicklung. Die Arbeit leistet einen Beitrag zur Bewertung und zum zukünftigen Einsatz dynamischer Untersuchungsmethoden im Bauwesen.
On the mechanisms of shrinkage reducing admixtures in self con-solidating mortars and concretes
(2010)
Self Consolidating Concrete – a dream has come true!(?) Self Consolidating Concrete (SCC) is mainly characterised by its special rheological properties. With-out any vibration this concrete can be placed and compacted under its own weight, without segrega-tion or bleeding. The use of such concrete can increase the productivity on construction sites and en-able the use of a higher degree of well distributed reinforcement for thin walled structural members. This new technology also reduces health risks since in contrast to the traditional handling of concrete, the emission of noise and vibration are substantially decreased. The specific mix design for self consolidating concretes was introduced around the 1980s in Japan. In comparison to normal vibrated concrete an increased paste volume enables a good distribution of aggregates within the paste matrix, minimising the influence of aggregates friction on the concrete flow property. The introduction of inert and/or pozzolanic additives as part of the paste provides the required excess paste volume without using disproportionally high amounts of plain cement. Due to further developments of concrete admixtures such as superplasticizers, the cement paste can gain self levelling properties without causing segregation of aggregates. Whereas SCC differs from normal vibrated concrete in its fresh attributes, it should reach similar properties in the hardened state. Due to the increased paste volume it usually shows higher shrinkage. Furthermore, owing to strength requirements, SCC is often produced at low water to cement ratios and hence may additionally suffer from autogenous shrinkage. This means that cracking caused by drying or autogenous shrinkage is a real risk for SCC and can compromise its durability as cracks may serve as ingression paths for gases and salts or might permit leaching. For the time being SCC still exhibits increased shrinkage and cracking probability and hence may be discarded in many practical applications. This can be overcome by a better understanding of those mechanisms and the ways to mitigate them. It is a target of this thesis to contribute to this. How to cope with increased shrinkage of SCC? In general, engineers are facing severe problems related to shrinkage and cracking. Even for normal and high performance concrete, containing moderate amounts of binder, a lot of effort was put on counteracting shrinkage and avoiding cracking. For the time being these efforts resulted in the knowledge of how to distribute cracks rather to avoid them. The most efficient way to decrease shrinkage turned out to be to decrease the cement content of concrete down to a minimum but still sufficient amount. For SCC this obviously seems to be contradictory with the requirement of a high paste volume. Indeed, the potential for shrinkage reduction is limited to some small range modifications in the mix design following two major concepts. The first one is the reduction of the required paste volume by optimising the aggregate grading curve. The second one involves high volume substitution of cement, preferentially using inert mineral additives. The optimization of grading curves is limited by several severe practical issues. Problems start with the availability of sufficiently fractionated aggregates. Usually attempts fail because of the enormous effort in composing application-optimized grading curves or mix designs. Due to durability reasons, the substitution rate for cement is limited depending on the application purpose and on environmental exposure of the hardened concrete. In the early 1980s Shrinkage Reducing Admixtures (SRA) were introduced to counteract drying shrinkage of concrete. The first publications explicitly dealing with SRA go back to Goto and Sato (Japan). They were published in 1983, which is also the time when the SCC concept was introduced. SRA modified concretes showed a substantial reduction of free drying shrinkage contributing to crack prevention or at least a significant decrease of crack width in situations of restrained drying shrinkage. Will shrinkage reducing admixtures contribute to a broader application of SCC? Within the last three decades performance tests on several types of concrete proved the efficiency of shrinkage reducing admixtures. So, at least in terms of shrinkage and cracking, concretes in general and SCC in particular can benefit from SRA application. But "One man's meat is another man's poison" and with respect to long term performance of SRA modified concretes there are still several issues to be clarified. One of these concerns the impact of SRAs on cement hydration. It is therefore an issue to know if changes in the hydrated phase composition, induced by SRA, result in undesired properties or decreased durability. Another issue is that the long term shrinkage reduction has to be evaluated. For example, one can wonder if SRA leaching may diminish or even eliminate long term shrinkage reduction and if the release of admixtures could be a severe environmental issue. It should also be noted that the basic mechanism or physical impact of SRA as well as its implementation in recent models for shrinkage of concrete is still being discussed. The present thesis tries to shed light on the role of SRA in self consolidating concrete focusing on the three questions outlined above: basic mechanisms of cement hydration, physical impact on shrinkage and the sustainability of SRA-application. Which contributions result from this study? Based on an extensive patent search, commercial SRAs could be identified to be synergistic mixtures of non-ionic surfactants and glycols. This turns out to be most important information for more than one reason and is the subject of chapter 4. An abundant literature focuses on properties of these non-ionic surfactants. Moreover, from this rich pool of information, the behaviour of SRAs and their interactions in cementitious systems were better understood through this thesis. For example, it could be anticipated how SRAs behave in strong electrolytes and how surface activity, i.e. surface tension, and interparticle forces might be affected. The synergy effect regarding enhanced performance induced by the presence of additional glycol in SRAs could be derived from the literature on the co-surfactant nature of glycols. Generally it now can be said that glycols ensure that the non-ionic surfactant is properly distributed onto the paste interfaces to efficiently reduce surface tension. In literature, the impact of organic matter on cement hydration was extensively studied for other admixtures like superplasticizer. From there, main impact factors related to the nature of these molecules could be identified. In addition, here again, the literature on non-ionic surfactants provides sufficient information to anticipate possible interactions of SRA with cement hydration based on the nature of non-ionic surfactants. All in all, the extensive study on the nature of non-ionic surfactants, presented in chapter 4, provides fundamental understanding of the behaviour of SRAs in cement paste. Taking a step further to relate this to the impact on drying and shrinkage required to review recent models for drying and shrinkage of cement paste as presented in chapter 3. There, it is shown that macroscopic thermodynamics of the open pore systems can be successfully applied to predict drying induced deformation, but that surface activity of SRA still has to be implemented to explain the shrinkage reduction it causes. Because of severe issues concerning the importance of capillary pressure on shrinkage, a new macroscopic thermodynamic model was derived in a way that meets requirements to properly incorporate surface activity of SRA. This is the subject of chapter 5. Based on theoretical considerations, in chapter 5 the broader impact of SRA on drying cementitious matter could be outlined. In a next step, cement paste was treated as a deformable, open drying pore system. Thereby, the drying phenomena of SRA modified mortars and concrete observed by other authors could be retrieved. This phenomenological consistency of the model constitutes an important contribution towards the understanding of SRA mechanisms. Another main contribution of this work came from introducing an artificial pore system, denominated the normcube. Using this model system, it could be shown how the evolution of interfacial area and its properties interact in presence of SRAs and how this impacts drying characteristics. In chapter 7, the surface activity of commercial SRAs in aqueous solution and synthetic pore solution was investigated. This shows how the electrolyte concentration of synthetic pore solution impacts the phase behaviour of SRA and conversely, how the presence of SRA impacts the aqueous electrolyte solution. Whilst electrolytes enhance self-aggregation of SRAs into micelles and liquid crystals, the presence of SRAs leads to precipitation of minerals as syngenite and mirabilite. Moreover, electrolyte solutions containing SRAs comprise limited miscibility or rather show miscibility gaps, where the liquid separates into isotropic micellar solutions and surfactant rich reverse micellar solutions. The investigation of surface activity and phase behaviour of SRA unravelled another important contribution. From macroscopic surface tension measurements, a relationship between excess surface concentration of SRA, bulk concentration of SRA and exposed interfacial area could be derived. Based on this, it is now possible to predict the actual surface tension of the pore fluid in the course of drying once the evolution of internal interfacial area is known. This is used later in this thesis to describe the specific drying and shrinkage behaviour of SRA modified pastes and mortars. Calorimetric studies on normal Portland cement and composite binders revealed that SRA alone show only minor impact on hydration kinetics. In presence of superplasticizer however the cement hydration can be significantly decelerated. The delaying impact of SRA could be related to a selective deceleration of silicate phase hydration. Moreover, it could be shown that portlandite precipitation in presence of SRA is changed, turning the compact habitus into more or less layered structures. Thereby, the specific surface increases, causing the amount of physically bound water to increase, which in turn reduces the maximum degree of hydration achievable for sealed systems. Extensive phase analysis shows that the hydrated phase composition of SRA modified binders re-mains almost unaffected. The appearance of a temporary mineral phase could be detected by environmental scanning electron microscopy. As could be shown for synthetic pore solutions, syngenite precipitates during early hydration stages and is later consumed in the course of aluminate hydration, i.e. when sulphates are depleted. Moreover, for some SRAs, the salting out phenomena supposed to be enhanced in strong electrolytes could also be shown to take place. The resulting organic precipitates could be identified by SEM-EDX in cement paste and by X-ray diffraction on solid residues of synthetic pore solution. The presence of SRAs could also be identified to impact microstructure of well cured cement paste. Based on nitrogen adsorption measurements and mercury intrusion porosimetry the amount of small pores is seen to increase with SRA dosage, whilst the overall porosity remains unchanged. The question regarding sustainability of SRA application is the subject of chapter 10. By means of leaching studies it could be shown that SRA can be leached significantly. The mechanism could be identified as a diffusion process and a range of effective diffusion coefficients could be estimated. Thereby, the leaching of SRA can now be estimated for real structural members. However, while the admixture can be leached to high extents in tank tests, the leaching rates in practical applications can be assumed to be low because of much reduced contact with water. This could be proven by quantifying admixture loss during long term drying and rewetting cycles. Despite a loss of admixture shrinkage reduction is hardly impacted. Moreover, the cyclic tests revealed that the total deformations in presence of SRA remain low due to a lower extent of irreversibly shrinkage deformations. Another important contribution towards the better understanding of the working mechanism of SRA for drying and shrinkage came from the same leaching tests. A significant fraction of SRA is found to be immobile and does not diffuse in leaching. This fraction of SRA is probably strongly associated to cement phases as the calcium-silicate-hydrates or portlandite. Based on these findings, it is now also possible to quantify the amount of admixture active at the interfaces. This means that, the evolution of surface tension in the course of drying can be approximated, which is a fundamental requirement for modeling shrinkage in presence of SRA. The last experimental chapter of this study focuses on the working mechanism and impact of SRA on drying and shrinkage. Based on the thermodynamics of the open deformable pore system introduced in chapter 5, energy balances are set up using desorption and shrinkage isotherms of actual samples. Information on distribution of SRA in the hydrated paste is used to estimate the actual surface tensions of the pore solution. In other words, this is the first time that the surface activity of the SRA in the course of the drying is fully accounted for. From the energy balances the evolution and properties of the internal interface are then obtained. This made it possible to explain why SRAs impact drying and shrinkage and in what specific range of relative humidity they are active. Summarising the findings of this thesis it can be said that the understanding of the impact of SRAs on hydration, drying and shrinkage was brought forward. Many of the new insights came from the careful investigation of the theory of non-ionic surfactants, something that the cement community had generally overlooked up to now.
Die Untersuchungen zu Frost-Tau-Widerstand und Alkali-Zuschlag-Reaktionen an Gesteinen, Gesteinskörnungen sowie daraus hergestelltem Beton erfolgen jeweils mit und ohne Taumitteleinfluss. Neben Untersuchungen nach in Deutschland gebräuchlichen Normen und Richtlinien werden auch Prüfverfahren nach US-Standards und -Richtlinien einbezogen und kritisch analysiert, Modifikationsvorschläge unterbreitet sowie Klimawechsellagerungen und Auslagerungsversuche durchgeführt. Ziel war u.a. festzustellen, ob anhand von Prüfergebnissen an Gesteinskörnungen tatsächlich auf deren Dauerhaftigkeitsverhalten im Beton zu schließen ist. Im Ergebnis erwies sich der Washington Hydraulic Fracture Test als optimales Frostprüfverfahren. Eine Alkali-Carbontat-Reaktion kann theoretisch und praktisch ablaufen, war aber in Mörtel und Beton nicht nachweisbar. Mittels Klimawechsellagerung konnte die Prüfzeit für AKR-gefährdete Gesteine in Beton drastisch verkürzt werden. Zudem fördern alkalihaltige Taumittel eine AKR.
Die Einflüsse polymerer Zusätze auf die Ausbildung der Mikrostruktur im frühen Stadium der Erhärtung und auf die Eigenschaften, insbesondere die Dauerhaftigkeit der modifizierten Mörtel wurden erforscht. Es sollte die Frage beantwortet werden, ob durch die Modifizierung die Dauerhaftigkeit von Mörteln mehr verbessert werden kann, als dies durch übliche betontechnologische Maßnahmen möglich ist. Die Ausbildung der Mikrostruktur in den ersten 24 Stunden der Erhärtung wurde mit verschiedenen Methoden, u.a. mittels ESEM, untersucht. Es wurden Modellvorstellungen zur Ausbildung der organischen Matrix und der anorganischen Matrix entwickelt: Interaktionen sind Adsorptionsreaktionen, Agglomerationen und Behinderung der Hydratation. Es wurden Frisch- und Festmörteluntersuchungen beschrieben und interpretiert. Unterschiedliche Dauerhaftigkeitsuntersuchungen wurden durchgeführt und bewertet. Die Mikrostruktur der Festmörtel wurde hinsichtlich ihres Einflusses auf die Dauerhaftigkeit betrachtet.
Der Schwerpunkt der Arbeit ist die Entwicklung eines Berechnungskonzeptes, mit dem die Auswirkungen des zeitabhängigen Materialverhaltens des Betons und der Spannbewehrung auf das Tragverhalten von Stahlbeton und Spannbetonbauteilen wirklichkeitsnah abgeschätzt werden können. Dabei wird auf die Berücksichtigung des nichtlinearen Kriechens und der Rißbildung besonderer Wert gelegt. Das Konzept basiert auf der sukzessiven Ermittlung der Schnittgrößenanteile und der Deformationen zu festgelegten Zeitpunkten, wobei die Ergebnisse der vorausgehenden Zeitschritte berücksichtigt werden können. Ausgehend von der Formulierung des mechanischen Problems als Extremalaufgabe wird die Berechnung innerhalb eines Zeitschritts auf die Lösung einer quadratischen Optimierungsaufgabe zurückgeführt, wobei die Rißbildung des Betons und geometrisch nichtlineare Einflüsse berücksichtigt werden können. Die Einbeziehung des nichtlinearen Kriechens erfolgt durch Beschleunigung der linearen Kriechgeschwindigkeit mit einem, von der aktuellen Betonspannung abhängigen Kriechzahlerhöhungsfaktor. Das Berechnungsmodell wird anhand von Langzeitversuchen an hochbelasteten Betonprismen und Stahlbetonstützen verifiziert. In umfangreichen numerischen Untersuchungen wird der Einfluß des nichtlinearen Kriechens auf das Tragverhalten von vorgespannten Querschnitten und Stahlbetonstützen analysiert.
Die vorliegende Arbeit besitzt zwei Schwerpunkte. Zum einen wird das Einsatzhärten von Bauteilen basierend auf vorhandenen Materialmodellen simuliert. Zum anderen wird ein Konzept zur Abschätzung der Dauerfestigkeit einsatzgehärteter Bauteile vorgestellt, in dem wesentliche Ergebnisse der Wärmebehandlungssimulation als neue Ausgangsgrößen verwendet werden. Damit konnte erstmals ein geschlossenes werkstoffmechanisches Dauerfestigkeitskonzept für einsatzgehärtete Bauteile erarbeitet werden. Für die Analyse beliebiger Bauteilgeometrien ist eine Implementation der Materialmodelle in die FEM notwendig. Im Rahmen dieser Arbeit wurde das FE-Programm ABAQUS verwendet. Speziell für dieses FE-Programm wurde innerhalb dieser Arbeit das Subroutine-System ANTRI zur Simulation des Einsatzhärtens und Abschätzung der Dauerfestigkeit für einsatzgehärtete Bauteile entwickelt. Zur Verifikation des Subroutine-Systems ANTRI wurden experimenteller Ergebnisse aus der Literatur herangezogen. Für alle untersuchten Beispiele wurde eine sehr gute Übereinstimmung zwischen experimentell ermittelten Daten und simulierten Daten festgestellt.