620 Ingenieurwissenschaften und zugeordnete Tätigkeiten
Refine
Document Type
- Conference Proceeding (15)
- Doctoral Thesis (9)
- Article (5)
- Book (1)
- Habilitation (1)
- Master's Thesis (1)
Institute
- Professur Informatik im Bauwesen (20)
- Professur Massivbau I (4)
- Institut für Strukturmechanik (ISM) (2)
- Professur Betriebswirtschaftslehre im Bauwesen (2)
- Institut Geotechnik Weimar (1)
- Institut für Konstruktiven Ingenieurbau (IKI) (1)
- Professur Planung von Ingenieurbauten (1)
- Professur Tragwerkslehre (1)
Keywords
- Optimierung (32) (remove)
The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.
In der vorliegenden Arbeit wird das Tragverhalten und das Sicherheitsniveau axial belasteter Großbohrpfähle in den pleistozänen Kalkarenit der Küstenregion von Dubai untersucht. Zunächst wird auf der Grundlage von Ergebnissen umfangreicher Baugrundanalysen und Probebelastungen das Tragverhalten detailliert beschrieben. Anschließend wird ein auf der Finiten-Elemente-Methode basierendes Strukturmodell zur Simulation des Last-Setzungsverhaltens von Großbohrpfählen im Sinne eines numerischen Versuchsstandes entwickelt. Um herstellungsbedingte Veränderungen der Baugrundeigenschaften in der Kontaktzone Pfahl-Baugrund zu berücksichtigen, die mit boden- und felsmechanischen Elementversuchen gewöhnlich nicht erfassbar sind, werden die Größen der relevanten konstitutiven Parameterwerte iterativ mittels inverser Optimierungsstrategien bestimmt. Abschließend wird eine methodische Vorgehensweise aufgezeigt, wie das Sicherheitsniveau axial belasteter Großbohrpfählen unter Berücksichtigung der räumlichen Variabilität der Baugrundeigenschaften zuverlässig abgeschätzt werden kann.
Theory and application of optimization strategies for the design of seismically excited structures
(2009)
The study introduces into the theory and application of optimization strategies in earthquake engineering. The optimization algorithm substitutes the intuitive solution of practical problems done by the engineer in daily practice, providing automatic design tools and numerical means for further exploration of the design space for various extremum states. This requires a mathematical formulation of the design task, that is provided for typical seismic evaluations within this document. Utilizing the natural relation between design and optimization tasks, appropriate mechanical concepts are developed and discussed. The explanations start with an overview on the mechanical background for continua. Hereby the focus is placed on elasto-plastic structures. The given extremum formulations are treated with help of discretization methods in order to obtain optimization problems. These basics are utilized for derivation of programs for eigenvalue and stability analysis, that are applied in simplified linear analysis for the design of seismically excited structures. Another focus is set on the application in simplified nonlinear design, that uses limit state analyses on the basis of nonlinear problem formulations. Well known concepts as the response and pushover analysis are covered as well as alternative strategies on the basis of shakedown theory or cycle and deformation based evaluations. Furthermore, the study gives insight into the application of optimization problems in conjunction with nonlinear time history analyses. The solution of step-by-step procedures within optimization algorithms is shown and aspects of dynamic limit state analyses are discussed. For illustration of the great variety of optimization-based concepts in earthquake engineering, several specialized applications are presented, e.g. the generation of artificial ground motions and the determination of reduction coefficients for design spectrum reduction due to viscous and hysteretic damping. As well alternative strategies for the design of base isolated structures with controlled impact are presented. All presented applications are illustrated with help of various examples.
Limit state design of hybrid structures with meshless methods using mathematical optimization
(2003)
The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization.
Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified.
Das wohltemperierte Netz - Zum Konstruktiven Entwurf direkt verglaster Stabnetze auf Freiformflächen
(2008)
Direkt verglaste Stabnetze repräsentieren ein strukturell und geometrisch hochgradig variables Prinzip zur Realisierung transparenter architektonischer Freiformflächen. Dieses beinhaltet die funktionale Entkopplung der Fassadenkonstruktion in ein tragendes Stabnetz und eine hüllende Verglasung. Ein formal universales, dimensional variables Knotenelement bildet dabei das Herzstück der Konstruktion. Die vorliegende Arbeit widmet sich dem Konstruktiven Entwurf frei geformter, direkt verglaster Stabnetze. Dieser umfasst schwerpunktmäßig die formale und dimensionale Konzeptionierung der Knotenelemente. Er wird maßgeblich beeinflusst von der Dimensionalitätsdifferenz zwischen dem formbeschreibenden Flächennetz aus nulldimensionalen Knoten und eindimensionalen Kanten sowie dem Stabnetz aus dreidimensionalen Knoten bzw. Stäben. Darüber hinaus definieren das freiformbedingte Erfordernis einer unikaten Ausrichtung der Stabnetzelemente sowie die materialspezifische Anforderung einer zwängungsfreien Lagerung der Gläser weitere dominante Einflussgrößen im Entwurfsprozess. In der Arbeit werden zunächst die geometrischen und konstruktiven Randbedingungen des Konstruktiven Stabnetzentwurfs dargestellt. Darauf aufbauend wird ein Zylinder-Achsen- Modell entwickelt, welches die unikate lokale Situation am Knoten unter Berücksichtigung einer variablen Ausrichtung der Stabnetzelemente sowie beliebig polygonaler Stabquerschnitte abstrahiert. Die Modellierung ermöglicht eine Bewertung des knotenbezogenen Status unter konstruktiven und mechanischen Aspekten. Sie bildet somit die Grundlage für eine Konstruktive Optimierung direkt verglaster Stabnetze. Mit Hilfe des Zylinder-Achsen-Modells werden alle bisher bekannten Prinzipien zur Ausrichtung der Stabnetzelemente analysiert. Dabei offenbaren sich verschiedene Defizite. Zu deren Überwindung werden drei neuartige Lösungsansätze entwickelt. Eine alternative Methode dient folglich zur Bestimmung einer konstruktiv optimierten Ausrichtung der Knotenachse. Ein zweiter Ansatz zielt auf die Definition einer neuartigen Stablängsbezugsachse, welche unabhängig von der Flächenkrümmung eine zwängungsfreie Lagerung der Glaselemente gewährleistet. Schließlich ermöglicht das dritte innovative Prinzip die konsistente Bestimmung einer Stabquerachse auch bei nicht ebenen Viereckmaschen.
Beitrag zur Lösung ingenieurtechnischer Entwurfsaufgaben unter Verwendung Evolutionärer Algorithmen
(2003)
In der vorliegenden Arbeit erfolgt die Anwendung Evolutionärer Algorithmen an baupraktischen Problemen. Der Einfluss unterschiedlicher Selektionsmethoden, Rekombinationsmethoden sowie der Einfluss von Mutation und Populationsgröße auf Sucheffizienz und Ergebnis werden erörtert. Die erzielten Erkenntnisse fliessen in die Definition Evolutionärer Strategiewerte ein, die als Grundlage für die Formulierung eines robusten Evolutionären Algorithmus dienen. Evolutionäre Algorithmen werden mit einem wachstumsorientierten Algorithmus erweitert (hybride Evolutionäre Algorithmen), um eine Steigerung der Effizienz bei der Lösungssuche zu erzielen. An ausgewählten Stahlkonstruktionen - Hallen, Wassertank, Dachkonstruktion - wird die Leistungsfähigkeit von robusten Evolutonären Algorithmen und den entwickelten hybriden Evolutionären Algorithmus überprüft.
This paper describes a didactic application that is part of a research project whose main aim is to develop a computer-aided system which will assist design and construction processes. It is based on the visual simulation of construction activities. Geometric modeling and virtual reality techniques are used in the visualization of the design process and to define user-friendly interfaces in order to access construction information, which could prove useful to Civil Engineering professionals. As a first step, was developed a prototype that serves as a didactic tool for Civil Engineering students of disciplines concerned with building construction. The construction of a double brick wall is the case studied. The wall is defined as a three dimensional model formed with the several components needed to edify it. Using the wall's virtual model it is possible to show, in an interactive way, the sequence of the construction process and observe from any point of view the configurations in detail of the building components. This is then a didactic tool application in construction processes domain of great interest to Civil Engineering students.
Im Rahmen der Arbeit wird das Querkrafttragverhalten bewehrter Bauteile aus Porenbeton untersucht. Die vorherrschende Beschreibung des inneren Kräftezustandes basiert auf der Modellvorstellung eines Fachwerks oder Sprengwerks mit Stahlzugstreben und Betondruckstreben. Ziel ist die Entwicklung eines alternativen Verfahrens zur Ermittlung des inneren Kräftezustandes.
Ausgehend vom Prinzip des Minimums des elastischen Gesamtpotentials wird eine Extremalaufgabe für das mechanische Problem formuliert. Die numerische Umsetzung basiert auf der Überführung der Extremalaufgabe in eine nichtlineare Optimierungsaufgabe. Diese lässt sich mit Standardsoftware lösen. Der Vorteil dieser Vorgehensweise besteht darin, dass das grundlegende Verfahren unabhängig vom verwendeten Materialmodell ist. Nichtlineare Spannungs-Dehnungs-Beziehungen oder die Berücksichtigung der Rissbildung erfordern keine Anpassung des Berechnungsalgorithmus.
Bewehrte Porenbetonbauteile besitzen im Hinblick auf das Trag- und Verformungsverhalten einige Besonderheiten. Berechnungsansätze für Stahlbetonelemente lassen sich nicht ohne entsprechende Modifikationen übertragen lassen. Die Bewehrung wird aus glatten Stäben hergestellt, so dass nach der Herstellung nur ein Haftverbund wirksam ist. Dieser kann über die Lebensdauer teilweise oder vollständig versagen. Die Kraftübertragung zwischen den Verbundelementen muss durch entsprechende Kopplungselemente (z.B. Querstäbe, Bügel, Endwinkel) sichergestellt werden.
Der Bewehrungskorb ist im Porenbeton gebettet. Aufgrund der relativ niedrigen Festigkeit bzw. Steifigkeit des Porenbetons und des teilweise unwirksamen Verbundes treten Relativverschiebungen zwischen beiden Verbundmaterialien auf. Hier sind die Ursachen dafür zu finden, dass die Beanspruchung der Querkraftbewehrung viel geringer ist als bei vergleichbaren Stahlbetonbalken. Der Querkraftbewehrungsgrad erlaubt keine Rückschlüsse auf den Querkraftwiderstand.
Das zentrale Anliegen der Arbeit ist die Implementierung nichtlinearer Materialansätze, der Rissbildung des Porenbetons sowie der porenbetonspezifischen Besonderheiten verschieblicher Verbund, diskrete Verankerung der Bewehrung und Relativverschiebungen zwischen Porenbeton und Bewehrung) in das Berechnungsmodell.
Die Leistungsfähigkeit des entwickelten Berechnungsmodells wird anhand von Beispielen demonstriert. Die Kräfte in der Bewehrung sowie das Tragwerksverhalten werden realitätsnah bestimmt.
The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes.