Professur Werkstoffe des Bauens
Refine
Document Type
- Doctoral Thesis (6)
- Article (4)
- Conference Proceeding (1)
- Master's Thesis (1)
Keywords
- Beton (6)
- Gips (3)
- Frost (2)
- Hydratation (2)
- Zement (2)
- Aggregation (1)
- Alit (1)
- Alkalisilicate (1)
- Aluminosilicate (1)
- Bildanalyse (1)
The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept.
To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory.
The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown.
The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste.
Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally.
As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content.
Utilizing Modern FIB/SEM Technology and EDS for 3D Imaging of Hydrated Alite and its Pore Space
(2021)
The exploration of cementitious materials using scanning electron microscopes (SEM) is mainly done using fractured or polished surfaces. This leads to high-resolution 2D-images that can be combined using EDX and EBSD to unveil details of the microstructure and composition of materials. Nevertheless, this does not provide a quantitative insight into the three-dimensional fine structure of for example C-S-H phases.
The focused ion beam (FIB) technology can cut a block of material in thin layers of less than 10 nm. This gives us a volume of 1000 μm³ with a voxel resolution of down to 4 x 4 x 10 nm³. The results can be combined with simultaneously acquired EDX data to improve image segmentation. Results of the investigation demonstrate that it is possible to obtain close-to-native 3D-visualisation of the spatial distribution of unreacted C3S, C-S-H and CH. Additionally, an optimized preparation method allows us to quantify the fine structure of C-S-H phases (length, aspect ratio, …) and the pore space.