51 Werkstoffkunde
Refine
Document Type
- Doctoral Thesis (13) (remove)
Institute
Keywords
- Alterung (2)
- Calciumsulfat (2)
- Cement (2)
- Fließmittel (2)
- Gips (2)
- Rice husk ash (2)
- Tricalcium silicate (2)
- Werkstoffkunde (2)
- ATZ (1)
- Acceleration (1)
- Alkali silica reaction (1)
- Alkalisulfat (1)
- Alkalisulfate (1)
- Alterungsdihydrat (1)
- Anhydrit III (1)
- Bauchemie (1)
- Baustoff (1)
- Beschleuniger (1)
- Betonverflüssiger (1)
- Calciumsulfatbindemittel (1)
- Complexation (1)
- Dispersionskeramik (1)
- Finite-Elemente-Methode (1)
- GIXRD (1)
- Heilungseffekt (1)
- Hydration and microstructure (1)
- Hüftgelenkprothese (1)
- Identifikation (1)
- Inertgas (1)
- Internal pozzolanic reactivity (1)
- Inverse Gaschromatographie (1)
- Keramik (1)
- Knoop Mikrohärte (1)
- Kristallitgröße (1)
- Luftzerlegung (1)
- Macro-mesoporous structure (1)
- Mesoporous structure (1)
- Mix design method (1)
- NRA (1)
- Oxidkeramik (1)
- Power Ultrasound (1)
- Pozzolanic reactivity (1)
- Retardation (1)
- Rheological property (1)
- Rietveld-Methode (1)
- Sauerstoff (1)
- Sauerstoffseparation (1)
- Self-compacting high performance concrete (1)
- Silica fume (1)
- Simulation (1)
- Stickstoff (1)
- Strukturdynamik (1)
- Stärkefließmittel (1)
- Superplasticizer (1)
- Supplementary cementitious materials (1)
- Synthese (1)
- Thermoelastic damping (1)
- Tribologie (1)
- Ultra-high performance concrete. (1)
- Verflüssigung (1)
- Werkstoffdämpfung (1)
- Zement (1)
- Zementhydratation (1)
- Zusatzmittel (1)
- cement (1)
- ceramics (1)
- composite cement (1)
- decay experiments (1)
- durability (1)
- energy dissipation (1)
- external pozzolanic reactivity (1)
- metakaolin (1)
- modal damping (1)
- überstöchiometrisches Wasser (1)
Die Gase Sauerstoff und Stickstoff werden für eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken benötigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kläranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz.
Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-% Stickstoff, 21 Vol.-% Sauerstoff und 1 Vol.-% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die benötigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten).
Für kleinere Verbraucher mit hohen Ansprüchen an die Reinheit des benötigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die Möglichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abhängigkeit (Lieferverträge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung für die benötigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben.
Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines möglichen Einsatzes für die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen.
Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosphären entladen.
Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien höhere Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbeständigkeit sowie relativ einfacher Handhabe aufweisen würden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein.
Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall möglich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren.
Somit besäße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gefächerte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential.
The present thesis studies the effects of rice husk ash (RHA) as a pozzolanic admixture and the combination of RHA and ground granulated blast-furnace slag (GGBS) on properties of ultra-high performance concrete (UHPC). The ultimate purpose of this study is to replace completely silica fume (SF) and partially Portland cement by RHA and GGBS to achieve sustainable UHPC. To reach this aim, characteristics of RHA in dependence of grinding period, especially its pozzolanic reactivity in saturated Ca(OH)2 solution and in a cementitious system at a very low water binder ration (w/b) were assessed. The influences of RHA on compatibility between superplasticizer and binder, workability, compressive strength, shrinkage, internal relative humidity, microstructure and durability of UHPC were also evaluated. Furthermore, synergic effects of RHA and GGBS on the properties of UHPC were investigated to produce more sustainable UHPC. Finally, various heat treatments were applied to study the properties of UHPC under these conditions. All the characteristics of these UHPCs containing RHA were compared to those of mixtures containing SF.
Finite Element Simulations of dynamically excited structures are mainly influenced by the mass, stiffness, and damping properties of the system, as well as external loads. The prediction quality of dynamic simulations of vibration-sensitive components depends significantly on the use of appropriate damping models. Damping phenomena have a decisive influence on the vibration amplitude and the frequencies of the vibrating structure. However, developing realistic damping models is challenging due to the multiple sources that cause energy dissipation, such as material damping, different types of friction, or various interactions with the environment.
This thesis focuses on thermoelastic damping, which is the main cause of material damping in homogeneous materials. The effect is caused by temperature changes due to mechanical strains. In vibrating structures, temperature gradients arise in adjacent tension and compression areas. Depending on the vibration frequency, they result in heat flows, leading to increased entropy and the irreversible transformation of mechanical energy into thermal energy.
The central objective of this thesis is the development of efficient simulation methods to incorporate thermoelastic damping in finite element analyses based on modal superposition. The thermoelastic loss factor is derived from the structure's mechanical mode shapes and eigenfrequencies. In subsequent analyses that are performed in the time and frequency domain, it is applied as modal damping.
Two approaches are developed to determine the thermoelastic loss in thin-walled plate structures, as well as three-dimensional solid structures. The realistic representation of the dissipation effects is verified by comparing the simulation results with experimentally determined data. Therefore, an experimental setup is developed to measure material damping, excluding other sources of energy dissipation.
The three-dimensional solid approach is based on the determination of the generated entropy and therefore the generated heat per vibration cycle, which is a measure for thermoelastic loss in relation to the total strain energy. For thin plate structures, the amount of bending energy in a modal deformation is calculated and summarized in the so-called Modal Bending Factor (MBF). The highest amount of thermoelastic loss occurs in the state of pure bending. Therefore, the MBF enables a quantitative classification of the mode shapes concerning the thermoelastic damping potential.
The results of the developed simulations are in good agreement with the experimental results and are appropriate to predict thermoelastic loss factors. Both approaches are based on modal superposition with the advantage of a high computational efficiency. Overall, the modeling of thermoelastic damping represents an important component in a comprehensive damping model, which is necessary to perform realistic simulations of vibration processes.