Filtern
Dokumenttyp
- Masterarbeit (2)
- Konferenzveröffentlichung (1)
- Dissertation (1)
Institut
Schlagworte
- Materialermüdung (4) (entfernen)
The intention of this thesis is first, to determine material constants of ductile cast irons (EN-GJS-400-15,EN-GJS-500-7, EN-GJS-600-3) for estimating fatigue damage. These constants are obtained from experimental results. These results are stress versus strain tests, strain versus crack initiation life tests,and consequently, Smith, Watson and Topper damage parameter, PSWT can be calculated. Using data fitting, the constants can be estimated, thus Uniform Material Law for ductile cast irons is fulfilled. Endurance limit stress is obtained based on research report termed Synthetic Wöhler Lines(SWL).It is found out that the endurance limit stress is a function of yield limit stress. Endurance life cycle is set as three millions for the three materials. Secondly, fatigue life assessment is done for diesel engine pump part made of the three ductile cast irons. Finite element calculation is done to get elastic stress concentration factor, Kt, and plastic notch factor Kp. Neuber ´s rule is used to determine local stress at notch subjected to constant amplitude load test and variable amplitude loading. The constant amplitude loading is conducted at a stress ratio of R=0 on the pump part. The test results show that fatigue life assessment based on the material constants is accurate. On the basis of the accuracy of constant amplitude test results, it is possible to determine for fatigue life for variable amplitude loading which is the real loading on the pump part. The variable amplitude loading is normally standardized for computational efficiency. This standardized loading is termed as CORAL (COmmon RAil Loading) sequence. CORAL is used to calculate fatigue life of pump part and is inputted to a Fatigue Life Evaluation computer program. This program uses rain flow cycle counting method. It can be concluded that the material constants for ductile cast irons fit well which is proved by experimental tests by constant amplitude loading on pump part. Then life prediction can be done for the typical pump loading, standardized variable amplitude loading known as CORAL
Der lebensdauerorientierte Entwurf von Stabbogenbrücken, mit Zuschnitt auf die Auslegung von Hängern, die durch Ermüdung infolge wirbelinduzierter Querschwingungen gefährdet sind, wird als stochastisches semi-infinites Optimierungsproblem formuliert. Zur Lösung dieses Problems sind mehrere Modellierungsebenen erforderlich, so dass ein Mehrebenenproblem entsteht. Es wird der derzeitige Entwicklungs- und Implementierungsstand bei der Umsetzung des Mehrebenenproblems in ein Entwurfsleitsystem (Software) aufgezeigt. Außerdem werden die Konzepte der noch ausstehenden Forschungsarbeit, die bereits erfolgreich beim lebensdauerorientierten Entwurf von Industriehallen mit Rahmensystem als Haupttragwerk eingesetzt wurden, diskutiert und ihre Einbildung in die bisher umgesetzte Forschungsarbeit erläutert.
Uniform Material Law (UML) is a handy and user-friendly method since only the tensile strength data of the material is needed for estimation of the strain-life curve, in contrast to other methods, such as four-point correlation method, universal slopes method, Mitchell's method, modified universal slopes method, which also require the data of the reduction in area or the fracture ductility of the material. On the other hand, the error level of UML estimations can be still decreased by refining the method. The objective of this thesis is putting forward a more refined method by extending conventional UML. Furthermore, a life prediction computation is carried out with the proposed extended UML and the results are compared to that of the conventional method. The results have proven that the maximum error is dropped down to 0.59% from 38% with the proposed extended UML method.
Ziel der Arbeit ist es, einen Beitrag zur Weiterentwicklung und Adaption der Holz-Beton-Verbundbauweise auf den Straßenbrückenbau zu leisten. Dabei stehen differenzierte Untersuchungen zum Trag- und Verformungsverhalten hybrider Holzbrückentragwerke sowie die Entwicklung geeigneter Verbundelemente im Vordergrund. Um die Einführung dieser innovativen Bauweise in der Praxis zu unterstützen, werden Bemessungs- und Konstruktionshinweise erarbeitet. Aufbauend auf eine Analyse des derzeitigen Forschungs- und Entwicklungsstandes auf dem Gebiet des Holz-Beton-Verbundbaus erfolgt die Untersuchung des Trag- und Verformungsverhaltens von Holz-Beton-Verbundbrücken anhand einer umfangreichen Parameterstudie. Dabei wird der Einfluss verschiedener Geometrie- und Steifigkeitsparameter auf die Tragfähigkeit und Gebrauchstauglichkeit von Holz-Beton-Verbundbrücken quantifiziert. Spezielle Untersuchungen dienen der Evaluation der Ermüdungssicherheit und der Ermittlung der Steifigkeitsdegradation unter Langzeitbeanspruchung auf der Basis einer realitätsnahen Abbildung des differenten zeit- und klimaabhängigen Tragverhaltens der Verbundbaustoffe. Praxisgerechte Empfehlungen für die optimierte konstruktive Durchbildung hybrider Holzbrückentragwerke fassen die Ergebnisse der Parameterstudie zusammen. Aus den Parameteranalysen leitet sich ein Anforderungsprofil bezüglich der Steifigkeit und Tragfähigkeit geeigneter Verbundelemente für den Straßenbrückenbau ab. Das Tragverhalten von drei ausgewählten Verbundelementtypen, welche diesem Profil entsprechen, wird anhand systematischer Scherversuche unter Kurzzeit-, Langzeit- und dynamischer Belastung analysiert. Aufbauend auf diese Testreihen werden weiterführende umfangreiche Versuchsserien mit dem Verbundelement Dübelleiste zur Bestimmung der mechanischen Kennwerte und zur Analyse des Gesamttragverhaltens vorgestellt. In Auswertung der umfangreichen Bauteilversuche und rechnerischer Simulationen auf der Basis Finiter-Elemente-Modelle wird ein Bemessungskonzept erarbeitet und die Eignung des Verbundelementes Dübelleiste für den Einsatz im Hybridbrückenbau nachgewiesen.