Refine
Document Type
- Doctoral Thesis (494) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (14)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
Die Zonenmethode nach Hertz ist ein vereinfachtes Verfahren zur Heißbemessung von Stahlbetonbauteilen. Um eine händische Bemessung zu ermöglichen, werden daher verschiedene Annahmen und Vereinfachungen getroffen. Insbesondere werden die thermischen Dehnungen vernachlässigt und das mechanische Verhalten durch einen verkleinerten Querschnitt mit konstanten Stoffeigenschaften beschrieben.
Ziel der vorliegenden Arbeit ist, dieses vereinfachte Verfahren in ein nichtlineares Verfahren zur Heißbemessung von Stahlbetondruckgliedern bei Brandbeanspruchung durch die Einheits-Temperaturzeitkurve zu überführen. Dazu werden die wesentlichen Annahmen der Zonenmethode überprüft und ein Vorschlag zur Weiterentwicklung vorgestellt. Dieser beruht im Wesentlichen auf der Modellierung der druckbeanspruchten Bewehrung. Diese weiterentwickelte Zonenmethode wird durch die Nachrechnung von Laborversuchen validiert und das Sicherheitsniveau durch eine vollprobabilistische Analyse und den Vergleich mit dem allgemeinen Verfahren bestimmt.
Ziel der Arbeit war das Adsorptionsverhalten ausgewählter schutzkolloidstabilisierter Polymerpartikel mit variierender chemischer Basis im zementären System zu beschreiben und basierend auf den gewonnenen Erkenntnissen das Konkurrenzverhalten beim Angebot unterschiedlicher mineralischer Oberflächen zu klären.
Sowohl die Destabilisierung der Polymerpartikel im alkalischen Milieu, welche eine Voraussetzung für derartige Adsorptionsprozesse ist, als auch die Veränderung von Oberflächeneigenschaften verschiedener mineralischer Partikel durch Hydratations- und Ionenadsorptionsprozesse, wurden u. a. mit Hilfe elektrokinetischer Experimente erfasst. Die spektralphotometrische Erstellung von Adsorptionsisothermen ermöglichte zudem die Ermittlung der jeweiligen adsorbierten Polymermenge zu verschiedenen Zeitpunkten der frühen Hydratation. Weiterhin wurde die Polymeradsorption an Partikeln ausgewählter Zusatzstoffe in Abhängigkeit von der Ionenstärke der Flüssigphase beschrieben.
Rasterelektronenmikroskopische Untersuchungen cryo-präparierter polymermodifizierter Zementleimproben ermöglichten es außerdem deren Mikrostruktur im suspensiven Zustand zu visualisieren. Diese Aufnahmen, ebenso wie die Ergebnisse grundlegender hydratationskinetischer Untersuchungen wurden in Wechselbeziehung zu den Ergebnissen der Adsorptionsuntersuchungen gebracht.
Maßgelbliche intermolekulare und interpartikuläre Wechselwirkungen, infolge derer sich die Stabilitätsverhältnisse im Zementleim ändern und die Polymerpartikel adsorbieren sind im Wesentlichen die Desorption des Schutzkolloids von der Polymerpartikeloberfläche, die Ionisation funktioneller Gruppen der Polymerpartikel und der Schutzkolloidmakromoleküle im alkalischen Milieu und infolgedessen die Komplexbildung mit Ionen der Zementleimporenlösung. Die Auswirkungen dieser Vorgänge auf die Lösungs- und Fällungskinetik des Zementleimes wurden erfasst und mit der chemischen Zusammensetzung der polymeren Systeme korreliert.
Die Thesis untersucht am Beispiel von Farb-Licht Forschungen (Interaktion dynamischen Lichts mit farbigen Oberflächen) und der Designforschungen am Potenzial der organisch Licht emittierenden Dioden (OLED) integrierende Aspekte des Designs im Kontext dieser Technologien. Des weiteren reflektiert die Thesis am Beispiel dieser Designforschungen das Verhältnis von Designforschung und Innovation für die gestalterischen Disziplinen.
Living heritage sites are strongly connected to their historical, geographical, socio-political and cultural context. A descriptive narrative of the evolutionary process of the living heritage site of a Sufi shrine is undertaken in this research. It focuses on the changing relationship between the spatial and socio-cultural aspects over time. The larger or macro regional context is interrelated to the micro architectural context. The tangible heritage is defined by and intimately tied to the intangible aspects of the heritage. It is these constituting macro and micro elements and their interrelationships particularly through space and architecture that the research thesis explores in its documentation and analysis.
The Sufi shrine in the South Asian Pakistani context is representative of a larger culture in the precolonial era. It is an expression of an indigenous modernity, belonging to a certain time period, place and community. The Sufi shrine as a building type has evolved from the precolonial time period, particularly starting at the golden ages of the Muslim Empire in the world (9th – 12th century), through the colonial age when western modernity arrived until the current neoliberal paradigm within the post independence period. Continued and evolved use of space, ritualistic performances, multiple social groups using the site are various elements whose documentation and analysis can establish the essential co-relations that contribute to continuity of its historical living. Physical and social relation of the historic site to its immediate settlement context is also a significant element that preserves the socio-cultural context.
The chosen case of the Shrine of Shah Abdul Latif Bhitai, situated in the small town of Bhitshah in the province of Sindh, Pakistan forms a unique example where the particular physical and socio-cultural environment forms the context within which the Sufi heritage lives and survives. It is well integrated within its context at multiple levels. What are these levels and how do the constituting elements integrate is a major subject of research? These form the background to defining some of the basic issues and questions addressed in this doctoral thesis.
Given that living heritage sites are unique due to their particular association to the context, the case study method was used to gain deeper insight and understanding on the topic.
Córdoba es la segunda ciudad más poblada de la Argentina, y posee el ejido municipal más extenso del país, siendo un importante centro industrial y de servicios del centro del país. Es además la cabecera de la segunda región metropolitana argentina, el Área Metropolitana de Córdoba (AMCBA). Si bien el desarrollo de sus áreas centrales y periurbanas es un tema bastante desarrollado académicamente, actualmente hay un vacío de conocimiento en la situación actual de las áreas pericentrales e intermedias de esta ciudad -aun cuando ocupan más del 30% del área urbanizada y donde habita la mayor parte de su población-. Es en estas áreas donde se ubica el objeto de estudio de esta tesis: los barrios pericentrales que forman un anillo alrededor del área central. Originados como extensiones suburbanas alrededor de 1940, y consolidados como barrios residenciales de clase media y media alta de baja densidad antes de 1970, ocupan lo que son hoy algunas de las áreas con mejor calidad ambiental y urbana de la ciudad.
Los barrios pericentrales son considerados generalmente consolidados y estables; sin embargo, analizados en detalle, muestran complejas transformaciones: un vaciamiento poblacional constante, a pesar del crecimiento demográfico en general de Córdoba y el AMCBA; aumento de inmuebles abandonados; y a diferencia de sectores en una similar posición, no son objeto de grandes inversiones inmobiliarias de renovación urbana.
Esta situación es invisibilizada, en parte por ser resultado de procesos con poco impacto relativo en la ciudad, y en parte porque estos procesos no están contemplados por los modelos urbanos locales vigentes –basados en la teoría racionalista y determinista de principios del siglo XX-, que conceptualizan a los barrios pericentrales como una “panacea urbana”. Esta tesis puso en disputa estos modelos, partiendo de la discusión sobre un fenómeno informal detectado indefectiblemente (aunque no exclusivamente) en estos barrios pericentrales: la microdensificación emergente.
La imposibilidad de colocar los inmuebles existentes en el mercado hace que los propietarios busquen nuevas formas de valorizar sus propiedades, de facilitar el acceso a la vivienda a sus hijos o de invertir sus ahorros de forma segura, obteniendo una fuente adicional de ingresos: en cada parcela edificada se aumenta la cantidad de unidades funcionales, aprovechando la superficie construible vacante o refuncionalizando las construcciones obsoletas, aunque manteniendo el grano y la escala de intervención respecto al tejido existente. La oferta de hábitat en estos barrios se diversifica, y no sólo evita la expulsión de población, sino que también atrae a nuevos habitantes. Además, en un tejido originalmente sólo residencial, incorpora actividades de comercio y servicios que enriquecen el tejido funcional.
El proceso se realiza sin planificación general (y por supuesto fuera del marco legal): es la suma de acciones individuales que se reconstruyen como una “tendencia” o “patrón emergente”, revitalizando el tejido urbano de forma sutil pero definitiva.
Se planteó como hipótesis que la microdensificación emergente es un proceso de revitalización que aprovecha el potencial del tejido de estos barrios de forma más sostenible y eficiente que el modelo impuesto formalmente.
10
La tesis se encuadró bajo el enfoque sistémico de la complejidad. Este enfoque entiende a la ciudad como un sistema complejo y dinámico, en desarrollo constante; determinado más por las interrelaciones entre sus componentes y entre esos componentes y el contexto, que por las condiciones de cada elemento individualmente. La calidad y cantidad de estas interacciones es primordial, al punto de definir la condición urbana de una aglomeración. Según estas premisas, un sistema urbano sostenible y eficiente será aquel que, maximizando recursos materiales y humanos (y de acuerdo a la capacidad de carga del sistema) desarrolle de redes de intercambio múltiples, diversas y descentralizadas, que generen procesos de sinergia y desarrollo inclusivos.
La investigación se estructuró entonces de forma tal de responder las siguientes preguntas:
•
En primer lugar, ¿cuáles son las condiciones específicas que catalizan la microdensificación en los barrios pericentrales de Córdoba?
•
Siendo la microdensificación una respuesta a una situación particular dentro del sistema urbano, ¿Cuál es el grado de sostenibilidad y eficiencia que aporta a los barrios pericentrales (en particular) y a Córdoba (en general)?
•
Y tras haber identificado su impacto en la estructura urbana, su potencial transformador y organizativo, ¿puede el estudio de los procesos emergentes hacer un aporte conceptual e instrumental a los modelos locales de planeamiento urbano?
Primeramente, un análisis documental reconstruyó la condición específica de los barrios pericentrales, y el escenario actual de Córdoba con respecto a la producción y acceso al hábitat urbano. Luego se infirió un escenario tendencial a corto y mediano plazo, que sirvió para definir distintos patrones de territorialización, incluyendo el patrón “formal” de los barrios pericentrales. Se continuó con el análisis específico de la microdensificación, proponiendo un escenario posible a mediano plazo donde el patrón de microdensificación ha sido plenamente desarrollado, transformando cuali y cuantitativamente el tejido espacio-funcional y socioeconómico.
A partir de estos resultados, se realizó un análisis comparativo de los distintos patrones de desarrollo urbano de Córdoba en cuanto a su sostenibilidad y eficiencia. Se demostró que el patrón de microdensificación en los barrios pericentrales es mucho más sostenible y eficiente que los patrones formales existentes, y se abrió la discusión que se desarrolla en la última parte de esta tesis:
El argumento desarrollado en esta investigación y los resultados que de él se desprenden tienen un carácter analítico y explicativo útil para el análisis de otros escenarios en el contexto urbano argentino y latinoamericano. En primer lugar, sobre preferir la revitalización progresiva frente a la renovación total o la creación de nuevo suelo urbano en la periferia; promover una ciudad compacta, diversa e inclusiva tanto social como funcionalmente; basada en la multiplicación y diversificación de los agentes productores de ciudad; que considera estos procesos, así como los mecanismos de empoderamiento, participación y gobernanza como instrumentos para lograr mayor sostenibilidad y eficiencia en el desarrollo urbano. Por otro lado, esta tesis puso en relevancia el rol de los procesos emergentes en un sistema urbano como mecanismo vital para generar esta revitalización. Finalmente, se discute el aporte del enfoque sistémico para comprender, explicar y proponer intervenciones a la disciplina.
The p-Laplace equation is a nonlinear generalization of the well-known Laplace equation. It is often used as a model problem for special types of nonlinearities, and therefore it can be seen as a bridge between very general nonlinear equations and the linear Laplace equation, too. It appears in many problems for instance in the theory of non-Newtonian fluids and fluid dynamics or in rockfill dam problems, as well as in special problems of image restoration and image processing.
The aim of this thesis is to solve the p-Laplace equation for 1 < p < 2, as well as for 2 < p < 3 and to find strong solutions in the framework of Clifford analysis. The idea is to apply a hypercomplex integral operator and special function theoretic methods to transform the p-Laplace equation into a p-Dirac equation. We consider boundary value problems for the p-Laplace equation and transfer them to boundary value problems for a p-Dirac equation. These equations will be solved iteratively by applying Banach’s fixed-point principle. Applying operator-theoretical methods for the p-Dirac equation, the existence and uniqueness of solutions in certain Sobolev spaces will be proved.
In addition, using a finite difference approach on a uniform lattice in the plane, the fundamental solution of the Cauchy-Riemann operator and its adjoint based on the fundamental solution of the Laplacian will be calculated. Besides, we define gener- alized discrete Teodorescu transform operators, which are right-inverse to the discrete Cauchy-Riemann operator and its adjoint in the plane. Furthermore, a new formula for generalized discrete boundary operators (analogues of the Cauchy integral operator) will be considered. Based on these operators a new version of discrete Borel-Pompeiu formula is formulated and proved.
This is the basis for an operator calculus that will be applied to the numerical solution of the p-Dirac equation. Finally, numerical results will be presented showing advantages and problems of this approach.
Am Beispiel der Elektrifizierung zweier Großstädte an der Westküste Südamerikas zeigt die Arbeit den globalen Einfluss deutscher Industrie- und Finanzakteure auf technische, städtebauliche und gesellschaftlich-kulturelle Entwicklungen zur Blütezeit des europäischen Imperialismus auf. Damit werden die Regionalgeschichten der chilenischen Hauptstadtregion und der Elektropolis Berlin zu einer Globalgeschichte miteinander verknüpft. Ein Hauptaugenmerk der Analyse liegt dabei auf den weltweiten Akteursnetzwerken und Machtverhältnissen sowie dem kulturellen Erbe und seiner gegenwärtigen Interpretation.
Brazilian battlers’ housing discusses the self-production of dwellings in the circumstances of the socioeconomic rise of the so-called Brazilian new middle class, occurred on the first decade of the years 2000. Battlers are a precarious working class of about 100 million people, who have used their recently increased purchase power to informally solve their private housing demands, planning, building and renovating their homes themselves, with limited technical knowledge and almost no access to formal technicians as for example architects. The result is a mode of housing production, which spreads over the territory in micro-local self-initiatives and informal social practices of construction and management. With the support of a controversial manpower, this practice presents all sorts of technical complications, but at the same time expedient ways of affordability and creative spatial solutions for ordinary constructive problems. Such initiatives have consolidated Brazilian informal settlements and peripheral subdivisions, attending a demand poorly responded by the government. This research recognises the benefits of the self-production, but questions the conditions under which it happens and asks if it really collaborates for a true social rise of those who are engaged in it. With an empirical and qualitative approach and taking dwelling construction processes leaded by battlers as main information sources, the academic work responds if and how the socioeconomic rise of the Brazilian battlers has exactly affected the self-production of dwellings. For that, battlers’ self-production of dwellings is analysed and discussed in five main aspects: 1) acquisition of land and real state, 2) building overtime, 3) space and creative power, 4) technical complications and building materials and 5) manpower and know-how.
Turbomachinery plays an important role in many cases of energy generation or conversion. Therefore, turbomachinery is a promising approaching point for optimization in order to increase the efficiency of energy use. In recent years, the use of automated optimization strategies in combination with numerical simulation has become increasingly popular in many fields of engineering. The complex interactions between fluid and solid mechanics encountered in turbomachines on the one hand and the high computational expense needed to calculate the performance on the other hand, have, however, prevented a widespread use of these techniques in this field of engineering. The objective of this work was the development of a strategy for efficient metamodel based optimization of centrifugal compressor impellers. In this context, the main focus is the reduction of the required numerical expense. The central idea followed in this research was the incorporation of preliminary information acquired from low-fidelity computation methods and empirical correlations into the sampling process to identify promising regions of the parameter space. This information was then used to concentrate the numerically expensive high-fidelity computations of the fluid dynamic and structure mechanic performance of the impeller in these regions while still maintaining a good coverage of the whole parameter space. The development of the optimization strategy can be divided into three main tasks. Firstly, the available preliminary information had to be researched and rated. This research identified loss models based on one dimensional flow physics and empirical correlations as the best suited method to predict the aerodynamic performance. The loss models were calibrated using available performance data to obtain a high prediction quality. As no sufficiently exact models for the prediction of the mechanical loading of the impellercould be identified, a metamodel based on finite element computations was chosen for this estimation. The second task was the development of a sampling method which concentrates samples in regions of the parameter space where high quality designs are predicted by the preliminary information while maintaining a good overall coverage. As available methods like rejection sampling or Markov-chain Monte-Carlo methods did not meet the requirements in terms of sample distribution and input correlation, a new multi-fidelity sampling method called “Filtered Sampling“has been developed. The last task was the development of an automated computational workflow. This workflow encompasses geometry parametrization, geometry generation, grid generation and computation of the aerodynamic performance and the structure mechanic loading. Special emphasis was put into the development of a geometry parametrization strategy based on fluid mechanic considerations to prevent the generation of physically inexpedient designs. Finally, the optimization strategy, which utilizes the previously developed tools, was successfully employed to carry out three optimization tasks. The efficiency of the method was proven by the first and second testcase where an existing compressor design was optimized by the presented method. The results were comparable to optimizations which did not take preliminary information into account, while the required computational expense cloud be halved. In the third testcase, the method was applied to generate a new impeller design. In contrast to the previous examples, this optimization featuredlargervariationsoftheimpellerdesigns. Therefore, theapplicability of the method to parameter spaces with significantly varying designs could be proven, too.
Due to an increased need for hydro-electricity, water storage, and flood protection, it is assumed that a series of new dams will be built throughout the world. Comparing existing design methodologies for arch-type dams, model-based shape optimization can effectively reduce construction costs and leverage the properties of construction materials. To apply the means of shape optimization, suitable variables need to be chosen to formulate the objective function, which is the volume of the arch dam here. In order to increase the consistency with practical conditions, a great number of geometrical and behavioral constraints are included in the mathematical model. An optimization method, namely Genetic Algorithm is adopted which allows a global search.
Traditional optimization techniques are realized based on a deterministic approach, which means that the material properties and loading conditions are assumed to be fixed values. As a result, the real-world structures that are optimized by these approaches suffer from uncertainties that one needs to be aware of. Hence, in any optimization process for arch dams, it is nec- essary to find a methodology that is capable of considering the influences of uncertainties and generating a solution which is robust enough against the uncertainties.
The focus of this thesis is the formulation and the numerical method for the optimization of the arch dam under the uncertainties. The two main models, the probabilistic model, and non-probabilistic models are intro- duced and discussed. Classic procedures of probabilistic approaches un- der uncertainties, such as RDO (robust design optimization) and RBDO (reliability-based design optimization), are in general computationally ex- pensive and rely on estimates of the system’s response variance and fail- ure probabilities. Instead, the robust optimization (RO) method which is based on the non-probabilistic model, will not follow a full probabilistic approach but works with pre-defined confidence levels. This leads to a bi-level optimization program where the volume of the dam is optimized under the worst combination of the uncertain parameters. By this, robust and reliable designs are obtained and the result is independent of any as- sumptions on stochastic properties of the random variables in the model.
The optimization of an arch-type dam is realized here by a robust optimiza- tion method under load uncertainty, where hydraulic and thermal loads are considered. The load uncertainty is modeled as an ellipsoidal expression. Comparing with any traditional deterministic optimization (DO) method, which only concerns the minimum objective value and offers a solution candidate close to limit-states, the RO method provides a robust solution against uncertainties.
All the above mentioned methods are applied to the optimization of the arch dam to compare with the optimal design with DO methods. The re- sults are compared and analyzed to discuss the advantages and drawbacks of each method.
In order to reduce the computational cost, a ranking strategy and an ap- proximation model are further involved to do a preliminary screening. By means of these, the robust design can generate an improved arch dam structure which ensures both safety and serviceability during its lifetime.
Die vorliegende Arbeit hat die Absicht, den Bedarf der Umsetzung der Planungsidee ‚kinder- und jugendfreundliche Stadtentwicklung’ in Korea zu erforschen und Vorschläge für die Umsetzung zu machen. Darüber hinaus will sie herausfinden, warum man sich bezüglich der Durchführung der kinder- und jugendfreundlichen Stadtentwicklung zunächst auf die Schulen und deren Umgebungen konzentrieren soll.
Deshalb widmet sich die Dissertation zuerst der Literaturrecherche, sowohl was den Begriff der kinder- und jugendfreundlichen Stadtentwicklung angeht als auch der Literatur bezüglich des Beitrags der Schulen zur Realisierung der kinder- und jugendfreundlichen Stadtentwicklung. Danach wird untersucht, ob das deutsche Instrument ‚Spielleitplanung‘ sich als Leitfaden für die gesamte Konzeption der koreanischen kinder- und jugendfreundlichen Stadtentwicklung eignet. Darüber hinaus werden Interviews mit koreanischen Experten aus Stadtplanung und Architektur, Pädagogik und öffentlicher Verwaltung als Forschungsmethode verwendet, um in Bezug auf die kinder- jungendfreundliche Stadtentwicklung den koreanischen Zustand zu analysieren. Zuletzt werden anhand der Untersuchungsergebnisse Handlungs-empfehlungen für die Durchführung der koreanischen kinder- und jugend-freundlichen Stadtentwicklung formuliert.
Anhand dieser Forschung kann konstatiert werden, dass die kinder- und jugendfreundliche Stadtentwicklung eine wichtige Planungsidee ist, weil dadurch Stadtplanerinnen und Stadtplaner sowohl zum körperlichen und geistigen gesunden Aufwachsen von Kindern und Jugendlichen als auch zur Entwicklung ihrer sozialen Kompetenzen erheblich beitragen können. Vor allem soll man die koreanische kinder- und jugendfreundliche Stadtentwicklung zunächst auf den Schulen und den schulischen Umgebungen umsetzen. Denn dadurch lassen sich vielseitige eventuelle Hindernisse bei der Durchführung der kinder- und jugendfreundlichen Stadtentwicklung vermeiden. Ein weiterer Grund ist, dass die Schulen in Korea nicht nur in der Gesellschaft eine zentrale Rolle spielen, sondern auch im Rahmen der Stadtplanung. Auffällig ist, dass die kinder- und jugendfreundliche Stadtentwicklung sowohl auf die räumlichen Gestaltungen als auch auf die Beteiligung von Kindern und Jugendlichen in der städtischen Planung fokussiert ist. Allerdings werden bei der Stadtentwicklung die Kinder und Jugendliche in Korea noch nicht als wichtige Akteure angesehen. Darum soll man die Spielleitplanung in Korea einbeziehen, weil sie als Leitbild bei einer Konzeption der koreanischen kinder- und jugendlichen Stadtentwicklung fungieren kann. Jedoch müssen dabei die kulturellen Unterschiede zwischen Deutschland und Korea berücksichtigt werden.
Weiterhin wurde durch die Interviews festgestellt, dass das Interesse und der Wille von Experten aus der Stadtplanung an Kinder- und Jugendfreundlichkeit die wichtigsten Voraussetzungen sind, um die kinder- und jugendfreundliche Stadtentwicklung in Korea zu verankern und zu verbreiten.
Zum Begriff Illustration scheint ein Missverhältnis zwischen wissenschaftlicher Rezeption und praktischem Gegenstand vorzuliegen. Traditionell bezeichnet der Begriff Illustration ein Bild, das einen textlich vorangestellten Inhalt noch einmal visuell wiederholt und auf diesem Weg in einem Abbild verdoppelt. Traditionelle Illustration benennt also ein sekundäres, explizit von einem anderen Inhalt abhängiges Bild, das auch weggelassen werden könnte, ohne das Inhalt verloren geht. Genutzt wird dieser traditionelle Illustrationsbegriff heute unter anderem in den Forschungsfeldern der Kunstgeschichte, der Bildwissenschaften und der Literaturwissenschaften. Aus der Perpektive der Praxis birgt der traditionelle Illustrationsbegriff ein grundsätzliches Problem in sich. Er versucht, mit einer statischen Definition ein äußerst lebendiges visuelles Phänomen unserer heutigen Zeit zu beschreiben. Professionelle Berufszeichner, die sogenannten Illustratorinnen und Illustratoren, kreieren heute Werke, die mit dem traditionellen Illustrationsbegriff nicht mehr beschreibbar sind. Mehr noch, der traditionelle Illustrationsbegriff macht blind für diese Entwicklungen, die sich deshalb außerhalb des wissenschaftlichen Diskurses abspielen. Die vorliegende Arbeit möchte deshalb einen Blick auf den Zustand zeitgenössischer literarischer Buchillustration werfen, um den Begriff der Illustration in seiner aktuellen Unschärfe zu präzisieren, zu erweitern und somit zu aktualisieren.
The underlying goal of this work is to reduce the uncertainty related to thermally induced stress prediction. This is accomplished by considering use of non-linear material behavior, notably path dependent thermal hysteresis behavior in the elastic properties.
Primary novel factors of this work center on two aspects.
1. Broad material characterization and mechanistic material understanding, giving insight into why this class of material behaves in characteristic manners.
2. Development and implementation of a thermal hysteresis material model and its use to determine impact on overall macroscopic stress predictions.
Results highlight microcracking evolution and behavior as the dominant mechanism for material property complexity in this class of materials. Additionally, it was found that for the cases studied, thermal hysteresis behavior impacts relevant peak stress predictions of a heavy-duty diesel particulate filter undergoing a drop-to-idle regeneration by less than ~15% for all conditions tested. It is also found that path independent heating curves may be utilized for a linear solution assumption to simplify analysis.
This work brings forth a newly conceived concept of a 3 state, 4 path, thermally induced microcrack evolution process; demonstrates experimental behavior that is consistent with the proposed mechanisms, develops a mathematical framework that describes the process and quantifies the impact in a real world application space.
In der vorliegenden Arbeit „Speaking from Somewhere: Der Audio-Walk als künstlerische Praxis und Methode“ wird der Audio-Walk auf theoretischer und praktischer Basis untersucht. Der erste Teil widmet sich dem Audio-Walk als künstlerisches Format. Darin wird analysiert, wie dieses aufgebaut ist und welche Komponenten wie zusammenwirken, damit sich die Darbietung – und die dafür charakteristisch intensive Wirkung – entfalten kann. Im zweiten Teil wird der Audio-Walk als experimentelle mobile Methode für die künstlerische Forschung betrachtet. Im Zentrum steht dabei die Frage, wie sich das künstlerische Format nutzen lässt, um spezifische Fragestellungen an einen ausgewählten Personenkreis zu adressieren, der sich währenddessen in einer inszenierten Situation befindet. Der Schwerpunkt liegt dabei auf Audio-Walk-Experimenten, die mit dieser Absicht entwickelt wurden. Als Fallbeispiel für die Methode dient dabei die Zusammenarbeit mit einer Gruppe kürzlich nach Deutschland migrierter Frauen.
Railway systems are highly competitive compared with other means of transportation because of their distinct advantages in speed, convenience and safety. Therefore, the demand for railway transportation is increasing around the world. Constructing railway tracks and related engineering structures in areas with loose or soft cohesive subgrade usually leads to problems, such as excessive settlement, deformation and instability. Several remedies have been proposed to avoid or reduce such problems, including the replacement of soft soil and the construction of piles or stone columns.
This thesis aims to expand the geotechnical knowledge of how to improve subgrade ballasted railway tracks, using stone columns and numerical modeling for the railway infrastructure. Three aspects are considered: i) railway track dynamics modeling and validation by field measurements, ii) modeling and parametric studies on stone columns, and iii) studies on the linear and non-linear behavior of stone columns under the dynamic load of trains.
The first step of this research was to develop a reliable numerical model of a railway track. The finite element method in a time domain was used for either a 2D plane strain or 3D analysis. Individual methods for modeling a train load in 2D and 3D were implemented and are discussed in this thesis. The developed loading method was validated with three different railway tracks using obtained vibration measurements. Later, these numerical models were used to analyze the influence of stone column length and train speed in the stress field.
The performance of the treated ground depends on various parameters, such as the strength of stone columns, spacing, length and diameter of the columns. Therefore, the second step was devoted to a parameter study of stone columns as a unit cell with an axisymmetric condition. The results showed that even short stone columns were effective for settlement reduction, and area of replacement was the main influential parameter in their performance.
The third part of this thesis focuses on a hypothetical railway-track response to the passage of various train speeds and the influence of stone-column length. The stress-strain response of subgrade is analyzed under either an elastic–perfectly plastic or advanced constitutive model. The non-linear soil response in the finite element method and the impact of train speed and stone column length on railway tracks are also evaluated. Moreover, the reductions of induced vibration – in both a horizontal and a vertical direction – after improvement are investigated.
Großsiedlungen sind nicht nur ein Erbe der Moderne, sondern seit über drei Jahrzehnten Gegenstand der Stadterneuerung. Dieses Buch erörtert, was eine heute „normale“ Großsiedlung stadtplanerisch benötigt und welche stadtentwicklungs- als auch wohnungspolitisch gesteuerten Ressourcen in einer integrierten Planungssteuerung gebündelt werden sollten. Dabei wird das grundsätzliche Planungsinstrument des Quartiersmanagements aktualisiert – über den Gegenstand Großsiedlungen hinaus.
The study of memory, architecture, and urban space has been the interest of researchers from the diverse fields around the world due to, the significance of dealing with memories especially after the tragedy of the Second World War. Nations in Europe has chosen not to neglect their past, moreover, overcoming it by strengthening the national identity. An approach was clear in the literature, art, further in the way of rebuilding their cities; that mainly has reflected on the value of urban spaces and their role in narrating the country’s national memory. Thanks to this approach, which has supported the post-war European nations to invite to an act of forgiveness rather than to forget.
On the contrary, memory, in relation to architecture is a form of knowledge has been neglected in Egypt, especially during the previous decades after the declaration of independence from the colonial power, and since 1952 revolution. Recently, a rising debate about Egypt national history and the need to renationalize the Egyptian historical consciousness has rapidly grown up, due to the political transformation has occurred because of the 25th uprising, 2011, which unveiled the power of public spaces in constituting the nation thoughts, especially Tahrir square. At the same time, this has unveiled the results of neglecting the past instead of overcoming it; unveiled a present carries the danger of conflict and repeating previous mistakes.
Researchers, historians, politicians, governmental organization, have worked in the purpose of revisiting the historical information, and have tried to document the current transformation of the 25th uprising. There was a public demand for redesigning Tahrir square to reflect the memory of the uprising as a symbol of the power of the public. However, after eight years, those memories have faded as if the 25th uprising has never happened.
Those circumstances are very relevant to the gap between urban design and the art of memory-work, in the scientific field. Few studies in Egypt conducted the concept of memory in relation to urban spaces, however, the matter requires more attention, to associate the need for renationalizing Egypt memory, with viewing urban space as a mean of narrating the country’s national memory and reflecting the citizens' current thoughts, as a try of nearing the distances between competing narratives.
Therefore, the research aims at developing a methodological framework that should contribute to renationalizing memory through urban space. Further, benefiting from the German experience by investigating lessons to learn. That is based on the hypothesis that, although there is no fixed formula for all countries to renationalize the historical consciousness of memory through urban spaces, lessons to be learned from Germany experience could be a driving dimension when designing Egyptian urban spaces with a concept of memory as an essential factor.
To guide the validity of the study’s hypothesis, a set of research questions are thus formulated: Starting from why memory is an essential factor when designing urban spaces? Regarding Egypt national memory, how it was constituted through history and how to read its representation on urban spaces? Also, the study quests the means of nationalizing memory through urban spaces? And What are the learned lessons from the German experience?
The study tries to answer those questions. Via an inductive analytical methodology which moves from the gap of knowledge and from a particular situation in Egypt, to study the German experience in renationalizing the concept of memory through urban spaces.
Within the scope of the study, exploring Egypt prevailing narratives and the inherited concepts which influenced the national memory is essential. Moreover, the research develops analytical political psychosocial model that could help reading memories in urban spaces, memory’s actors, and memory influences. To validate this model, case studies are analysed in light of the concluded aspects. Consequently, the expected result is to infer broad general learned lessons for the Egyptian case.
Research findings and conclusions answer the research questions, interpret literature review, recommend some guide points to three target groups: first, practice field; to encourage designers to value the national and collective memories when designing urban spaces. Second, to ask policymakers to take the public participation into consideration, when taking decisions related to urban development. Third, the thesis recommends future researches of urban memory that connect theoretical information with the practice field.
Finally, enhancing the memory-work in relation to the national narrative, conveying a meaningful message, when designing urban spaces could encourage citizens to learn, to interact, and to dissolve boundaries between the competing narratives in post-conflict societies.
Die Dissertation umfasst eine vertiefende Untersuchung der denkmalpflegerischen Erfassung von Siedlungen und Wohnanlagen als eine der wichtigsten und umfangreichsten Bautypologien der 1950er bis 1980er Jahre in Westeuropa. Die Beschäftigung mit Bauten der 1950er bis 1980er Jahre führt bei Denkmalpflegern, Architekten, Bewohnern und Politikern immer wieder zu Überlegungen, ob diese besondere Erfassungs- und Erhaltungsstrategien erfordern. Dabei wirft die Typologie des Siedlungsbaus besondere Fragen auf, da sie neben architektonischen Aspekten auch städtebauliche, landschaftsplanerische und sozialwissenschaftliche Bedeutungsebenen umfasst. Nicht zuletzt sind Siedlungen der 1950er bis 1980er Jahre aus denkmalpflegerischer Sicht häufig stark gefährdet. Obwohl die meisten Siedlungen noch nicht ausreichend kunsthistorisch gewürdigt und erfasst sind, unterliegen sie einem hohen Veränderungsdruck. Die teilweise enorme städtebauliche Dimension und Monofunktionalität der Anlagen, die häufig aufgrund von seriellen Bautypen und vorfabrizierten Elementen gleichförmige architektonische Gestaltung und eine Vernachlässigung im Bauunterhalt erschweren den Zugang zu dieser Baugattung. Gewandelte Wohnbedürfnisse sowie bauphysikalische, energietechnische oder ästhetische Maßnahmen führen zur Veränderung der noch relativ jungen Bausubstanz. Zudem weisen Siedlungen der Nachkriegszeit aufgrund ihrer teilweise sehr großzügigen Freiraumstruktur ein großes Potential zur Nachverdichtung auf. Die Auswahl der in dieser Arbeit untersuchten Länder und Siedlungen ergab sich aus der Auswertung einer europaweiten Befragung von Denkmalämtern sowie anschließend geführten Gesprächen mit Fachleuten. Die untersuchten 20 Siedlungen und Wohnanlagen repräsentieren verschiedene Länder (Deutschland, Österreich, Schweiz, Frankreich, Niederlande, England) sowie Bauepochen und Siedlungstypologien, die von der Einfamilienhaussiedlung über Siedlungen mit gemischter Bautypologie hin zur Großsiedlung reichen. Anhand der unterschiedlichen Fallbeispiele wird aufgezeigt, inwiefern die jeweiligen Länder, Bauepochen beziehungsweise Siedlungstypologien Einfluss auf die denkmalpflegerischen Erfassungsstrategien haben. Zusammenfassend lässt sich resümieren, dass die Gesetzesgrundlagen und Denkmalkriterien für eine denkmalpflegerische Erfassung von Bauten der 1950er bis 1980er Jahre in den meisten Ländern konstant bleiben, während sich in den Bereichen Zeitpunkt, Auswahl und Einbindung der Öffentlichkeit eine Modifizierung oder zumindest eine Reflektion der bisherigen Strukturen abzeichnet. Sinnvoll und wünschenswert erscheint darüber hinaus ein verstärkter Austausch der Denkmalpflege über die nationalen Grenzen hinweg und ein gegenseitiges Lernen voneinander.
Matrix-free voxel-based finite element method for materials with heterogeneous microstructures
(2019)
Modern image detection techniques such as micro computer tomography
(μCT), magnetic resonance imaging (MRI) and scanning electron microscopy (SEM) provide us with high resolution images of the microstructure of materials in a non-invasive and convenient way. They form the basis for the geometrical models of high-resolution analysis, so called image-based analysis.
However especially in 3D, discretizations of these models reach easily the size of 100 Mill. degrees of freedoms and require extensive hardware resources in terms of main memory and computing power to solve the numerical model. Consequently, the focus of this work is to combine and adapt numerical solution methods to reduce the memory demand first and then the computation time and therewith enable an execution of the image-based analysis on modern computer desktops. Hence, the numerical model is a straightforward grid discretization of the voxel-based (pixels with a third dimension) geometry which omits the boundary detection algorithms and allows reduced storage of the finite element data structure and a matrix-free solution algorithm.
This in turn reduce the effort of almost all applied grid-based solution techniques and results in memory efficient and numerically stable algorithms for the microstructural models. Two variants of the matrix-free algorithm are presented. The efficient iterative solution method of conjugate gradients is used with matrix-free applicable preconditioners such as the Jacobi and the especially suited multigrid method. The jagged material boundaries of the voxel-based mesh are smoothed through embedded boundary elements which contain different material information at the integration point and are integrated sub-cell wise though without additional boundary detection. The efficiency of the matrix-free methods can be retained.
The capitalization of ‘certified’ sustainable building sector will be investigated over the power theory of value approach of Jonathan Nitzan and Shimshon Bichler. The study will be initiated by questioning why the environment problems are one of the first items on the agenda and by sharing the ideas of scholars who approaches the subject skeptically, because the predominant literature underlying the necessity and prominence of the topic is already well-known and adapted by the majority. Over the theory developed by Nitzan and Bichler, the concepts of capitalization, strategic sabotage, power, legitimacy, and obedience will be discussed. The hypothesis of “the absentee owners of the construction sector, holding the whip hand and capitalizing the ecology, control the growth and the creativity of green building production and make it carbon-dependent, in order to increase their profit margin” will be questioned. To strengthen the arguments in the hypothesis, the factors, the institutional arrangements, value measurement methods, which affect directly the net present value, will be investigated both in corporation and in building scale in detail, because net present value/ capitalization is asserted as the most important criteria by Nitzan and Bichler to make the investment decisions in the capitalist economic system. To trace the implications of power and the strategic sabotage that power caused, as the empirical dimension of this dissertation, an interface exploring the correlational ties between the climate responsive architecture and the ever changing political, economical, and social contexts and building economics praxis by decades will be developed and the expert interviews will be conducted with the design teams and the appraisers.
In der vorliegenden Arbeit wird die Bedeutung und Funktion des fotografischen Bildes und im Besonderen der Handyfotografie im Kontext von Internet und sozialen Onlinenetzwerken beschrieben, untersucht und diskutiert.
Im Spannungsfeld zwischen sozialwissenschaftlichen Theorien, foto- und medientheoretischem Diskurs sowie ästhetisch künstlerischen Perspektiven wird ausgelotet, welche konkreten visuellen und sozialen Formen die gegenwärtige mobile digitale Bildpraxis angenommen hat, wie sich ihre Gebrauchsweise innerhalb des globalen gesellschaftlichen Alltags darstellt, und in welcher Weise ihr spezielles Zusammenspiel aus „shooting“, „uploading“, „sharing“ zu neuen menschlichen Handlungsmustern und zur Schaffung neuer kultureller Realitäten beiträgt.
Die Dissertation „Hey! I’m an Angel! Zum Verhältnis von Medium, Subjekt und Wirklichkeit in Eija-Liisa Ahtilas Videoinstallationen“ untersucht in der Hauptsache vier zentrale Videoinstallationen Ahtilas aus den Jahren 1995 bis 2014. Grundlegend ist die These, dass Ahtilas Arbeiten nicht, wie bisher angenommen, in den Kontext einer medien-, erkenntnis- und subjektkritischen Videokunst einzuordnen sind. Stattdessen werden sie als mediale Vehikel intersubjektiv geprägter Wirklichkeitserfahrungen für das Subjekt bereitgestellt: Entgegen dem aktuellen Forschungsstand arbeitet sich Ahtila nicht an der Kritik des Mediums Film/Video ab, das einen wirklichkeitsverfälschenden oder -ersetzenden Einfluss auf das manipulierte Subjekt nimmt. Vielmehr nutzt die Künstlerin das Potenzial des Mediums Film/Video aus, um einem relativ stabilen Subjekt die Wirklichkeitserfahrungen Anderer zu öffnen und auf diese Weise seinen Erfahrungshorizont zu erweitern.
Der systematische Schwerpunkt der Arbeit liegt erstens darauf, ein sich durch Ahtilas bisheriges Schaffen ziehendes ‚Ziel‘ der Integration der Betrachterin in eine intersubjektive Erfahrungssphäre nachvollziehbar zu machen. Hierfür wird insbesondere eine Perspektive auf die frühen Arbeiten entwickelt, in der die Brüche in Ahtila Arbeiten integrative statt distanzierende Wirkung haben. Zweitens wird in eingehenden Analysen der Wandel verständlich, der sich zwischen Ahtilas früher Schaffensphase (1995 – 2002) und der aktuellen Schaffensphase (seit 2010) hinsichtlich der Art und Weise vollzieht, wie diese Integration gelingt. Es zeigt sich, dass der Einstieg in die intersubjektiv geprägten Erfahrungssphären in der frühen Phase ästhetisch konstituiert ist. Mit der aktuellen Schaffensphase werden hingegen alltägliche Formen der Empathie und Mimesis zentral, sowie deren leibliche Konsequenzen für die Betrachterin. Drittens wird eine zunehmende pragmatische Tendenz darin deutlich, die Integration der Betrachterin in die Erfahrungen Anderer zu ermöglichen. Dies wird vor dem Hintergrund eines allgemeinen pragmatischen Zuges aktueller zeitgeistiger Bewegungen erläutert. Viertens wird gezeigt, dass Ahtilas Arbeiten auf der Annahme einer Kontinuität in gewisser Hinsicht von der außerfilmischen Wirklichkeit in die filmische Fiktion hinein basieren, sowie auf dem Verständnis filmischer Fiktionen als virtuelle Weltfassungen. Ahtila fragt auf der Grundlage dieses Verständnisses filmischer Fiktion nicht nach der Wahrheit dieser Fiktion als These über die Wirklichkeit, wie es dem Forschungskanon über die Künstlerin zu entnehmen ist. Sondern nach der Wirksamkeit der filmischen Fiktion für die Wirklichkeit.
Den Schwerpunkt der vorliegenden Arbeit bilden die konstruktive Entwicklung und die wissenschaftliche Untersuchung des Tragverhaltens von Kopplungselementen für den Ingenieur¬holzbau. Die neu entwickelten Verbindungen bestehen bevorzugt aus Stahlteilen mit Gewindeanschluss und werden mit einem Polymerverguss im Holz verankert. Die Kopplungselemente gestatten die einfache montagegerechte Verbindung von Holzbauteilen untereinander oder zu anderen Bauweisen. Sie nehmen die Zug- oder Drucklast axial auf und gewährleisten eine leistungsfähige und schlupf¬freie Verbindung zum Holz. Für den Verguss wird ein mineralisch gefülltes Epoxidharz mit sehr guten Klebeeigenschaften gegenüber Holz und den meisten üblichen Baustoffen verwendet.
Im Holz werden für die Verankerung der Kopplungselemente Bohrungen vorgesehen, die sich sowohl aus technologischen Gründen als auch für eine gleichmäßige Spannungsverteilung vorteilhaft erweisen. Der Durchmesser der Bohrung ist gegenüber dem Verbindungselement deutlich größer, wodurch die Verbindungsfläche zum Holz bei konstanter Länge ansteigt. Die Vergrößerung der Fugen zwischen dem Verbindungselement und der Holzwandung von 7 mm auf 17 mm führt bei konstanter Einbindetiefe und gleichem Durchmesser des Verbin¬dungsmittels zu einer Laststeigerung von über 20 %. Die größere Vergussfuge gewährleistet darüber hinaus eine Vergleichmäßigung der Spannungen innerhalb der Verbindung, den Ein¬satz von frei geformten Verbindungselementen und eine Vereinfachung der Herstellung.
Die Kopplungselemente sind für den Einsatz in Zug- oder Druckstößen ebenso geeignet wie für biegesteife Anschlüsse axial verbundener Biegeträger oder Rahmenecken. Sie können werkseitig im Holzbauteil vorgesehen oder als direkte Verbindung auf der Baustelle vergossen werden. Für die Baupraxis wird durch den Einsatz des schwindarmen Verguss-materials mit hoher Klebewirkung eine Bandbreite an Anwendungen vom Toleranzausgleich über Schubbewehrung bis zum Druck-, Zug- oder Biegeanschluss geboten.
This research seeks to make an exploratory study of the strategies used by the creators of monuments, memorials, and commemorative places located in the public spaces that use sound as one of the primary raw material in their design. The term acoustic monu-memorials was coined in this research to encircle these structures and places. In order to achieve the goal of this research, it was necessary to compile a number of samples, primarily after the digital recording era of captured sound around 1971 to the present. The compilation was relevant because such a compendium was not found in the literature, and to the author's knowledge, a comprehensive investigation of the strategies used in planning acoustic monu-memorials in the urban spaces does not exist.
The method used to create such compendium was to send a question to people with different background identities, such as visual and sound artists, musicians, art curators, and heritage scholars among others. This question produced a selection of 51 examples of acoustic monu-memorials located in public spaces. Subsequently, the examples were classified into four major categories according to their form and nature. Additionally, two examples from the main categories were chosen as case studies: The Sinti and Roma Memorial in Berlin, Germany and the Niche monument in Cali, Colombia. These study cases were presented, described, and analysed in detail as they represent the type of what could be defined as an acoustic monu-memorial in general.
Lynch’s (1960) five elements that help individuals build the image of the city were transferred and used as a tool to help to build this image into acoustic terms. A thorough analysis of the acquired data yielded found the strategies used by the designers to shape, modify, transform, and structure public space. These strategies are entitled Sound Spaces. Moreover, a list entitled Urban Acoustic Commemoration Code was compiled. This list of suggestions addresses urban planners, architects, artists, designers, and general public interested in the aspects involved when creating acoustic commemoration phenomena in public spaces.
The task-based view of web search implies that retrieval should take the user perspective into account. Going beyond merely retrieving the most relevant result set for the current query, the retrieval system should aim to surface results that are actually useful to the task that motivated the query.
This dissertation explores how retrieval systems can better understand and support their users’ tasks from three main angles: First, we study and quantify search engine user behavior during complex writing tasks, and how task success and behavior are associated in such settings. Second, we investigate search engine queries formulated as questions, and explore patterns in a large query log that may help search engines to better support this increasingly prevalent interaction pattern. Third, we propose a novel approach to reranking the search result lists produced by web search engines, taking into account retrieval axioms that formally specify properties of a good ranking.
Since the Industrial Revolution in the 1700s, the high emission of gaseous wastes into the atmosphere from the usage of fossil fuels has caused a general increase in temperatures globally. To combat the environmental imbalance, there is an increase in the demand for renewable energy sources. Dams play a major role in the generation of “green" energy. However, these structures require frequent and strict monitoring to ensure safe and efficient operation. To tackle the challenges faced in the application of convention dam monitoring techniques, this work proposes the inverse analysis of numerical models to identify damaged regions in the dam. Using a dynamic coupled hydro-mechanical Extended Finite Element Method (XFEM) model and a global optimization strategy, damage (crack) in the dam is identified. By employing seismic waves to probe the dam structure, a more detailed information on the distribution of heterogeneous materials and damaged regions are obtained by the application of the Full Waveform Inversion (FWI) method. The FWI is based on a local optimization strategy and thus it is highly dependent on the starting model. A variety of data acquisition setups are investigated, and an optimal setup is proposed. The effect of different starting models and noise in the measured data on the damage identification is considered. Combining the non-dependence of a starting model of the global optimization strategy based dynamic coupled hydro-mechanical XFEM method and the detailed output of the local optimization strategy based FWI method, an enhanced Full Waveform Inversion is proposed for the structural analysis of dams.
Recent years have seen a gradual shift in focus of international policies from a national and regional perspective to that of cities, a shift which is closely related to the rapid urbanization of developing countries. As revealed in the 2011 Revision of the World Urbanization Prospects published by the United Nations, 51% of the global population (approximately 3.6 billion people) lives in cities. The report predicts that by 2050, the world’s urban population will increase by 2.3 billion, making up 68% of the population. The growth of urbanization in the next few decades is expected to primarily come from developing countries, one third of which will be in China and India.
With rapid urbanization and the ongoing growth of mega cities, cities must become increasingly resilient and intelligent to cope with numerous challenges and crises like droughts and floods arising from extreme climate, destruction brought by severe natural disasters, and aggregated social contradictions resulting from economic crises. All cities face the urban development dynamics and uncertainties arising from these problems. Under such circumstances, cities are considered the critical path from crisis to prosperity, so scholars and organizations have proposed the construction of “resilient cities.” On the one hand, this theory emphasizes cities’ defenses and buffering capacity against disasters, crises and uncertainties, as well as recovery after destruction; on the other hand, it highlights the learning capacity of urban systems, identification of opportunities amid challenges, and maintenance of development vitality. Some scholars even believe that urban resilience is a powerful supplement to sustainable development. Hence, resilience assessment has become the latest and most important perspective for evaluating the development and crisis defense capacity of cities.
Rather than a general abstract concept, urban resilience is a comprehensive measurement of a city’s level of development. The dynamic development of problems is reflected through quantitative indicators and appraisal systems not only from the perspective of academic research, but also governmental policy, so as to scientifically guide development, and measure and compare cities’ development levels. Although international scholars have proposed
quantitative methods for urban resilience assessment, they are however insufficiently systematic and regionally adaptive for China’s current urban development needs. On the basis of comparative study on European and North American resilient city theories, therefore, this paper puts forwards a theoretical framework for resilient city systems consistent with China’s national conditions in light of economic development pressure, natural resource depletion, pollution, and other salient development crises in China. The key factors influencing urban resilience are taken into full consideration; expert appraisal is conducted based on the Delphi Method and the analytic hierarchy process (AHP) to design an extensible and updatable resilient city evaluation system which is sufficiently systematic, geographically adaptable, and sustainable for China’s current urban development needs. Finally, Changsha is taken as the main case for empirical study on comprehensive evaluation of similar cities in Central China to improve the indicator system.
Die Gase Sauerstoff und Stickstoff werden für eine Vielzahl an technischen, industriellen, biologischen und medizinischen Einsatzzwecken benötigt. So liegen Anwendungsgebiete dieser Gase neben der klassischen metallverarbeitenden und der chemischen Industrie bei Sauerstoff vor allem in der Medizin, Verbrennungs- und Kläranlagenoptimierung sowie der Fischzucht und bei Stickstoff als Schutz- beziehungsweise Inertgas in der Kunststoffindustrie, der Luft- und Raumfahrt sowie dem Brandschutz.
Die Bereitstellung der Gase Sauerstoff und Stickstoff wird nahezu ausschließlich durch die Abtrennung aus der Umgebungsluft realisiert, welche aus ca. 78 Vol.-% Stickstoff, 21 Vol.-% Sauerstoff und 1 Vol.-% Spurengasen (Ar, CO2, Ne, He, ...) besteht. Am Markt etablierte Verfahren der Luftzerlegung sind das Linde-, das PSA- (pressure swing adsorption/Druckwechseladsorption) oder verschiedene Membran-Verfahren. Hierdurch werden die benötigten Gase entweder direkt vor Ort beim Verbraucher erzeugt (PSA- und Polymer-Membranverfahren: geringe Reinheiten) oder zentral in großen Anlagen hergestellt (Linde-Verfahren: hohe Reinheiten) und anschließend zum Verbraucher in Form von Flaschen- oder Tankgasen geliefert (Tansportkosten).
Für kleinere Verbraucher mit hohen Ansprüchen an die Reinheit des benötigten Sauerstoffs beziehungsweise Stickstoffs ergibt sich nur die Möglichkeit, die Gase als kostenintensive Transportgase zentraler Gaseversorger zu beziehen und sich somit in eine Abhängigkeit (Lieferverträge, Flaschen-/Tankmieten, ...) zu diesen zu begeben sowie eine eigene Lagerhaltung für die benötigten Gase (Mehraufwand, Lagerkosten, Platzbedarf) zu betreiben.
Ziel dieser Arbeit ist es, keramische Material-Systeme auf Basis chemischer Hochtemperatur-Reaktionen als Reaktive Oxidkeramiken zu entwickeln und diese hinsichtlich eines möglichen Einsatzes für die Sauerstoffseparation in neuartigen Luftzerlegungsanlagen zu untersuchen.
Derartige Anlagen sollen in ihrem Prinzip an die regenerative Sauerstoffseparation angelehnt sein und in ihren Reaktoren die Reaktiven Oxidkeramiken als Festbett-Material abwechselnd mit Luft be- und Vakuum oder O2-armen Atmosphären entladen.
Die Verwendung Reaktiver Oxidkeramiken, welche im Vergleich zu den bisherigen Materialien höhere Sauerstoffaustauschmengen und -raten bei gleichzeitig hoher Lebensdauer und Korrosionsbeständigkeit sowie relativ einfacher Handhabe aufweisen würden, soll ein Schritt in Richtung einer effizienten alternativen Luftzerlegungstechnologie sein.
Mit den Reaktiven Oxidkeramiken in einer Luftzerlegungsanlage sollte es im besten Fall möglich sein, in kleinen Anlagen sehr reinen Sauerstoff und zugleich sauerstofffreies Inertgas zu erzeugen sowie eine Sauerstoffan- oder -abreicherung von Luft, Prozess- oder Abgasen zu generieren.
Somit besäße eine solche, auf Reaktiven Oxidkeramiken basierende Technologie sehr weit gefächerte Einsatzgebiete und demzufolge ein enormes wirtschaftliches Potential.
This thesis addresses an adaptive higher-order method based on a Geometry Independent Field approximatTion(GIFT) of polynomial/rationals plines over hierarchical T-meshes(PHT/RHT-splines).
In isogeometric analysis, basis functions used for constructing geometric models in computer-aided design(CAD) are also employed to discretize the partial differential equations(PDEs) for numerical analysis. Non-uniform rational B-Splines(NURBS) are the most commonly used basis functions in CAD. However, they may not be ideal for numerical analysis where local refinement is required.
The alternative method GIFT deploys different splines for geometry and numerical analysis. NURBS are utilized for the geometry representation, while for the field solution, PHT/RHT-splines are used. PHT-splines not only inherit the useful properties of B-splines and NURBS, but also possess the capabilities of local refinement and hierarchical structure. The smooth basis function properties of PHT-splines make them suitable for analysis purposes. While most problems considered in isogeometric analysis can be solved efficiently when the solution is smooth, many non-trivial problems have rough solutions. For example, this can be caused by the presence of re-entrant corners in the domain. For such problems, a tensor-product basis (as in the case of NURBS) is less suitable for resolving the singularities that appear since refinement propagates throughout the computational domain. Hierarchical bases and local refinement (as in the case of PHT-splines) allow for a more efficient way to resolve these singularities by adding more degrees of freedom where they are necessary. In order to drive the adaptive refinement, an efficient recovery-based error estimator is proposed in this thesis. The estimator produces a recovery solution which is a more accurate approximation than the computed numerical solution. Several two- and three-dimensional numerical investigations with PHT-splines of higher order and continuity prove that the proposed method is capable of obtaining results with higher accuracy, better convergence, fewer degrees of freedom and less computational cost than NURBS for smooth solution problems. The adaptive GIFT method utilizing PHT-splines with the recovery-based error estimator is used for solutions with discontinuities or singularities where adaptive local refinement in particular domains of interest achieves higher accuracy with fewer degrees of freedom. This method also proves that it can handle complicated multi-patch domains for two- and three-dimensional problems outperforming uniform refinement in terms of degrees of freedom and computational cost.
Die kommunale Energiewende stellt die beteiligten Akteure vor große Herausforderungen: Auf Grundlage strukturierter Daten sollen Maßnahmen
für eine nachhaltige Infrastruktur geplant und umgesetzt werden. Oft fehlt
den Beteiligten jedoch das nötige Wissen über die lokalen Potentiale und Rahmenbedingungen—und an geeigneten Methoden der Informationsvermittlung. Gegenstand dieser Arbeit ist die Analyse der Planungsstrukturen und der Entwurf eines visuellen Informationssystems. Mit der vorliegenden Untersuchung wird gezeigt, wie mit Hilfe von Befragungen, partizipativen Visualisierungen, fiktionalen Szenarien und der systematischen Anwendung visueller Variablen eine fundierte Grundlage geschaffen werden kann für eine nutzerorientierte Gestaltung.
Focusing on the neoliberal symbolic urban reconstruction of the Macedonian capital, known as “Skopje 2014”, the PhD work deals with urban space production through storytelling. Embracing the criticism put forward in the political, cultural and social debates that have spun around Skopje’s reconstruction, the artistic-based research sought to relate and analyze the symbolic narratives of “Skopje 2014” and the vernacular and civic narratives of Skopje and locate overlapping, divergent, complementary or conflictual aspects of their respective narrative structures. Informed by subjective citizens’ stories and experiences of the urban as well as binaural sonic observations of the city, the research findings were presented in the form of an interactive audio guided walk through the city. The thesis is organized in three chapters, preceded by an INTRODUCTION and followed by a CONCLUSION. CHAPTER ONE sets the theoretical context, presents the case study “Skopje 2014”, and discusses the research design. The audio guided walk is presented in CHAPTER TWO. Its content consists of five tracks, or subchapters, conceptualized and named as five different aspects of the city: THE MODERNIST CITY, THE FEMALE CITY, THE MEMORY CITY, THE POSTCOMMUNIST CITY and THE TOURIST CITY, according to the discourses related to these tracks. CHAPTER THREE, the EPILOGUE, is the final discussion of the research project, in which several meta-conclusions are drawn.
Identification of flaws in structures is a critical element in the management of maintenance and quality assurance processes in engineering. Nondestructive testing (NDT) techniques based on a wide range of physical principles have been developed and are used in common practice for structural health monitoring. However, basic NDT techniques are usually limited in their ability to provide the accurate information on locations, dimensions and shapes of flaws. One alternative to extract additional information from the results of NDT is to append it with a computational model that provides detailed analysis of the physical process involved and enables the accurate identification of the flaw parameters. The aim here is to develop the strategies to uniquely identify cracks in two-dimensional 2D) structures under dynamic loadings.
A local NDT technique combined eXtended Finite Element Method (XFEM) with dynamic loading in order to identify the cracks in the structures quickly and accurately is developed in this dissertation. The Newmark-b time integration method with Rayleigh damping is used for the time integration. We apply Nelder-Mead (NM)and Quasi-Newton (QN) methods for identifying the crack tip in plate. The inverse problem is solved iteratively, in which XFEM is used for solving the forward problem in each iteration. For a timeharmonic excitation with a single frequency and a short-duration signal measured along part of the external boundary, the crack is detected through the solution of an inverse time-dependent problem. Compared to the static load, we show that the dynamic loads are more effective for crack detection problems. Moreover, we tested different dynamic loads and find that NM method works more efficient under the harmonic load than the pounding load while the QN method achieves almost the same results for both load types.
A global strategy, Multilevel Coordinate Search (MCS) with XFEM (XFEM-MCS) methodology under the dynamic electric load, to detect multiple cracks in 2D piezoelectric plates is proposed in this dissertation. The Newmark-b method is employed for the time integration and in each iteration the forward problem is solved by XFEM for various cracks. The objective functional is minimized by using a global search algorithm MCS. The test problems show that the XFEM-MCS algorithm under the dynamic electric load can be effectively employed for multiple cracks detection in piezoelectric materials, and it proves to be robust in identifying defects in piezoelectric structures. Fiber-reinforced composites (FRCs) are extensively applied in practical engineering since they have high stiffness and strength. Experiments reveal a so-called interphase zone, i.e. the space between the outside interface of the fiber and the inside interface of the matrix. The interphase strength between the fiber and the matrix strongly affects the mechanical properties as a result of the large ratio of interface/volume. For the purpose of understanding the mechanical properties of FRCs with functionally graded interphase (FGI), a closed-form expression of the interface strength between a fiber and a matrix is obtained in this dissertation using a continuum modeling approach according to the ver derWaals (vdW) forces. Based on the interatomic potential, we develop a new modified nonlinear cohesive law, which is applied to study the interface delamination of FRCs with FGI under different loadings. The analytical solutions show that the delamination behavior strongly depends on the interphase thickness, the fiber radius, the Young’s moduli and Poisson’s ratios of the fiber and the matrix. Thermal conductivity is the property of a material to conduct heat. With the development and deep research of 2D materials, especially graphene and molybdenum disulfide (MoS2), the thermal conductivity of 2D materials attracts wide attentions. The thermal conductivity of graphene nanoribbons (GNRs) is found to appear a tendency of decreasing under tensile strain by classical molecular dynamics (MD) simulations. Hence, the strain effects of graphene can play a key role in the continuous tunability and applicability of its thermal conductivity property at nanoscale, and the dissipation of thermal conductivity is an obstacle for the applications of thermal management. Up to now, the thermal conductivity of graphene under shear deformation has not been investigated yet. From a practical point of view, good thermal managements of GNRs have significantly potential applications of future GNR-based thermal nanodevices, which can greatly improve performances of the nanosized devices due to heat dissipations. Meanwhile, graphene is a thin membrane structure, it is also important to understand the wrinkling behavior under shear deformation. MoS2 exists in the stable semiconducting 1H phase (1H-MoS2) while the metallic 1T phase (1T-MoS2) is unstable at ambient conditions. As it’s well known that much attention has been focused on studying the nonlinear optical properties of the 1H-MoS2. In a very recent research, the 1T-type monolayer crystals of TMDCs, MX2 (MoS2, WS2 ...) was reported having an intrinsic in-plane negative Poisson’s ratio. Luckily, nearly at the same time, unprecedented long-term (>3months) air stability of the 1T-MoS2 can be achieved by using the donor lithium hydride (LiH). Therefore, it’s very important to study the thermal conductivity of 1T-MoS2.
The thermal conductivity of graphene under shear strain is systematically studied in this dissertation by MD simulations. The results show that, in contrast to the dramatic decrease of thermal conductivity of graphene under uniaxial tensile, the thermal conductivity of graphene is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16%. The wrinkle evolves when the shear strain is around 5%-10%, but the thermal conductivity barely changes.
The thermal conductivities of single-layer 1H-MoS2(1H-SLMoS2) and single-layer 1T-MoS2 (1T-SLMoS2) with different sample sizes, temperatures and strain rates have been studied systematically in this dissertation. We find that the thermal conductivities of 1H-SLMoS2 and 1T-SLMoS2 in both the armchair and the zigzag directions increase with the increasing of the sample length, while the increase of the width of the sample has minor effect on the thermal conductions of these two structures. The thermal conductivity of 1HSLMoS2 is smaller than that of 1T-SLMoS2 under size effect. Furthermore, the temperature effect results show that the thermal conductivities of both 1H-SLMoS2 and 1T-SLMoS2 decrease with the increasing of the temperature. The thermal conductivities of 1HSLMoS2 and 1T-SLMoS2 are nearly the same (difference <6%) in both of the chiral orientations under corresponding temperatures, especially in the armchair direction (difference <2.8%). Moreover, we find that the strain effects on the thermal conductivity of 1HSLMoS2 and 1T-SLMoS2 are different. More specifically, the thermal conductivity decreases with the increasing tensile strain rate for
1T-SLMoS2, while fluctuates with the growth of the strain for 1HSLMoS2. Finally, we find that the thermal conductivity of same sized 1H-SLMoS2 is similar with that of the strained 1H-SLMoS2 structure.
Modern immersive telepresence systems enable people at different locations to meet in virtual environments using realistic three-dimensional representations of their bodies. For the realization of such a three-dimensional version of a video conferencing system, each user is continuously recorded in 3D. These 3D recordings are exchanged over the network between remote sites. At each site, the remote recordings of the users, referred to as 3D video avatars, are seamlessly integrated into a shared virtual scenery and displayed in stereoscopic 3D for each user from his or her perspective.
This thesis reports on algorithmic and technical contributions to modern immersive telepresence systems and presents the design, implementation and evaluation of the first immersive group-to-group telepresence system in which each user is represented as realistic life-size 3D video avatar. The system enabled two remote user groups to meet and collaborate in a consistent shared virtual environment. The system relied on novel methods for the precise calibration and registration of color- and depth- sensors (RGBD) into the coordinate system of the application as well as an advanced distributed processing pipeline that reconstructs realistic 3D video avatars in real-time. During the course of this thesis, the calibration of 3D capturing systems was greatly improved. While the first development focused on precisely calibrating individual RGBD-sensors, the second stage presents a new method for calibrating and registering multiple color and depth sensors at a very high precision throughout a large 3D capturing volume. This method was further refined by a novel automatic optimization process that significantly speeds up the manual operation and yields similarly high accuracy. A core benefit of the new calibration method is its high runtime efficiency by directly mapping from raw depth sensor measurements into an application coordinate system and to the coordinates of its associated color sensor. As a result, the calibration method is an efficient solution in terms of precision and applicability in virtual reality and immersive telepresence applications. In addition to the core contributions, the results of two case studies which address 3D reconstruction and data streaming lead to the final conclusion of this thesis and to directions of future work in the rapidly advancing field of immersive telepresence research.
Landwirtschaftliche Biogasanlagen leisten mit ca. 9.300 Anlagen und einem Anteil von 5,3% an der Stromerzeugung, einen Beitrag zur Erzeugung Erneuer-barer Energien in Deutschland. Die Optimierung dieser Anlagen fördert die nachhaltige Bereitstellung von Strom, Wärme und BioErdgas.
Das Ergebnis dieser Forschungsarbeit ist die Entwicklung eines mehrmethodi-schen Bewertungsansatzes zur Beschreibung der Qualität der Eingangs-substrate als Teil einer ganzheitlichen Prozessoptimierung. Dies gelingt durch die kombinierte Nutzung klassischer Analysesätze, der Nutzung organolepti-scher Parameter – der humansensorischen Sinnenprüfung – und der Integration von prozess- und substratspezifischem Erfahrungswissen. Anhand von halbtechnischen Versuchen werden Korrelationen und Kausalitäten zwi-schen chemisch-physikalischen, biologischen, organoleptischen und erfahrungsbezogenen Parametern erforscht. Die Entwicklung einer Fallbasis mit Hilfe des Fallbasierten Schließens, einer Form Künstlicher Intelligenz, zeigt das Entwicklungs- und Integrationspotenzial der Automatisierung auf, insbesondere auch im Hinblick auf neue Ansätze z.B. Industrie 4.0. Erste Lösungen zur Bewältigung der identifizierten Herausforderungen der mehrmethodischen Prozessbewertung werden vorgestellt.
Abschließend wird ein Ausblick auf den weiteren Forschungsbedarf gegeben und die Übertragbarkeit des mehrmethodischen Bewertungsansatzes auf andere Anwendungsfelder z.B. Bioabfallbehandlung, Kläranlagen angeregt.
Gashochdruckleitungen aus Stahl werden mit Hilfe eines deterministischen Sicherheitskonzeptes bemessen. Im unveränderten Bemessungszustand und im bestimmungsgemäßem Betrieb ist die statische Tragfähigkeit der Gashochdruckleitungen gegeben.
Mit den Jahren unterliegen Gashochdruckleitungen aus Stahl geometrischen Veränderungen, die häufig durch Korrosion hervorgerufen werden. Die Beurteilung der statischen Tragfähigkeit erfolgt dann unter Berücksichtigung dieser geometrischen Änderung.
Deterministische Sicherheitsbeiwerte der Bemessung neuer Gashochdruckleitungen können für die Bemessung bestehender korrosionsgeschädigter Gashochdruckleitungen nicht herangezogen werden, da diese einen definierten Beanspruchungs- und Geometriezustand unterstellen, welcher durch den geometrischen Einfluss der Korrosion so nicht mehr besteht.
Die Arbeit befasst sich mit der Ermittlung deterministischer Sicherheitsbeiwerte für die Bemessung korrosionsgeschädigter Gashochdruckleitungen auf Basis von Versagenswahrscheinlichkeiten und stellt ein Anwendungskonzept zu deren Nutzung vor.
The Garden Suburbs of Cairo. A morphological urban analysis of Zamālik, Ma‘ādī, and Heliopolis
(2019)
During the British occupation of Egypt in the beginning of the 20th century, several suburban developments were established on the periphery of the city of Cairo. These initially attracted the small British community and later foreigners and Egyptians, mainly from the elite community. These suburban developments, including Ma‘ādī, Zamālik, Heliopolis, Qubbah-Gardens, and Garden City, became the fashionable residential quarters of Cairo. Until now, some of these areas still represent the distinguishable residential settlements of the city. Ma‘ādī, Zamālik, and Heliopolis specifically are nostalgically appropriated in the design of recent suburban developments around Greater Cairo.
Some of the 20th century suburban developments around Cairo are labeled or described as “garden cities.” During the early 20th century, two thriving British town planning movements emerged, namely, the garden city movement and the garden suburb movement. This study investigates the hypothesis that these suburban developments, are indeed “garden suburbs” like the British movement, despite that few are labeled or described as “garden cities,”. Although several studies have examined the historical development of such settlements, their relation, however, to the British planning movements and their transfer process received little attention from planning historians. Few studies also analyze the urban design aspects that made these suburban developments distinguishable since their foundation and until today.
To guide the validity of this study’s hypothesis, a set of research questions are formulated: (1) What is the difference between the garden city and the garden suburb movements? (2) How were the British planning movements transferred to Egypt? (3) What are the urban design aspects that makes these suburban developments distinguishable as garden suburbs? To answer these research questions, a historical morphological urban analysis is conducted through case studies.
The study first studies the difference between the garden city and the garden suburb movements, mainly in Britain, through the analysis of publications on the promoter of both movements: for the garden city, E. Howards’ book “The Garden City of Tomorrow,” published in 1902, and for the garden suburb, R. Unwin’s books “Town Planning in Practice,” published in 1909, and “Nothing Gained from Overcrowding,” published in 1912. Then a morphological urban analysis of Letchworth Garden City and Brentham Garden Suburb, considered the first examples of each movement, is conducted. In order to analyze the transfer process, the study adopts M. Volait and J. Nasr’s theory on transporting planning, through investigating the authority in power responsible for the establishment of these suburban developments. This is followed by the morphological urban analysis of three suburban developments around Cairo, namely, Zamālik, Ma‘ādī, and Heliopolis. The morphological analysis focuses on the background of their establishment, authority in power responsible for the development, design principles, urban context, street typology, residential block typology, social infrastructure, and social target group.
Finally, the study compares between Brentham, Letchworth, Zamālik, Ma‘ādī, and Heliopolis. The comparative analysis aims to highlight the differences between the studied cases of Cairo and how they are different from or alike the British movements. This study concludes that the suburban developments around Cairo during the British occupation, are in fact garden suburbs, despite that some are being described or labeled as garden city. This movement was exported via urban land development companies with foreign European capital, rather than via colonial dominance. It finally highlights a set of urban design aspects that distinguish them as garden suburbs of Cairo. This study hopes to support future conservation plan of these areas and the design of future suburban developments.
Die Dissertation umfasst eine vertiefende Untersuchung der denkmalpflegerischen Erfassung von Siedlungen und Wohnanlagen als eine der wichtigsten und umfangreichsten Bautypologien der 1950er bis 1980er Jahre in Westeuropa. Die Beschäftigung mit Bauten der 1950er bis 1980er Jahre führt bei Denkmalpflegern, Architekten, Bewohnern und Politikern immer wieder zu Überlegungen, ob diese besondere Erfassungs- und Erhaltungsstrategien erfordern. Dabei wirft die Typologie des Siedlungsbaus besondere Fragen auf, da sie neben architektonischen Aspekten auch städtebauliche, landschaftsplanerische und sozialwissenschaftliche Bedeutungsebenen umfasst. Nicht zuletzt sind Siedlungen der 1950er bis 1980er Jahre aus denkmalpflegerischer Sicht häufig stark gefährdet. Obwohl die meisten Siedlungen noch nicht ausreichend kunsthistorisch gewürdigt und erfasst sind, unterliegen sie einem hohen Veränderungsdruck. Die teilweise enorme städtebauliche Dimension und Monofunktionalität der Anlagen, die häufig aufgrund von seriellen Bautypen und vorfabrizierten Elementen gleichförmige architektonische Gestaltung und eine Vernachlässigung im Bauunterhalt erschweren den Zugang zu dieser Baugattung. Gewandelte Wohnbedürfnisse sowie bauphysikalische, energietechnische oder ästhetische Maßnahmen führen zur Veränderung der noch relativ jungen Bausubstanz. Zudem weisen Siedlungen der Nachkriegszeit aufgrund ihrer teilweise sehr großzügigen Freiraumstruktur ein großes Potential zur Nachverdichtung auf. Die Auswahl der in dieser Arbeit untersuchten Länder und Siedlungen ergab sich aus der Auswertung einer europaweiten Befragung von Denkmalämtern sowie anschließend geführten Gesprächen mit Fachleuten. Die untersuchten 20 Siedlungen und Wohnanlagen repräsentieren verschiedene Länder (Deutschland, Österreich, Schweiz, Frankreich, Niederlande, England) sowie Bauepochen und Siedlungstypologien, die von der Einfamilienhaussiedlung über Siedlungen mit gemischter Bautypologie hin zur Großsiedlung reichen. Anhand der unterschiedlichen Fallbeispiele wird aufgezeigt, inwiefern die jeweiligen Länder, Bauepochen beziehungsweise Siedlungstypologien Einfluss auf die denkmalpflegerischen Erfassungsstrategien haben. Zusammenfassend lässt sich resümieren, dass die Gesetzesgrundlagen und Denkmalkriterien für eine denkmalpflegerische Erfassung von Bauten der 1950er bis 1980er Jahre in den meisten Ländern konstant bleiben, während sich in den Bereichen Zeitpunkt, Auswahl und Einbindung der Öffentlichkeit eine Modifizierung oder zumindest eine Reflektion der bisherigen Strukturen abzeichnet. Sinnvoll und wünschenswert erscheint darüber hinaus ein verstärkter Austausch der Denkmalpflege über die nationalen Grenzen hinweg und ein gegenseitiges Lernen voneinander.
Gashochdruckleitungen aus Stahl werden mit Hilfe eines deterministischen Sicherheitskonzeptes bemessen. Im unveränderten Bemessungszustand und im bestimmungsgemäßem Betrieb ist die statische Tragfähigkeit der Gashochdruckleitungen gegeben.
Mit den Jahren unterliegen Gashochdruckleitungen aus Stahl geometrischen Veränderungen, die häufig durch Korrosion hervorgerufen werden. Die Beurteilung der statischen Tragfähigkeit erfolgt dann unter Berücksichtigung dieser geometrischen Änderung.
Deterministische Sicherheitsbeiwerte der Bemessung neuer Gashochdruckleitungen können für die Bemessung bestehender korrosionsgeschädigter Gashochdruckleitungen nicht herangezogen werden, da diese einen definierten Beanspruchungs- und Geometriezustand unterstellen, welcher durch den geometrischen Einfluss der Korrosion so nicht mehr besteht.
Die Arbeit befasst sich mit der Ermittlung deterministischer Sicherheitsbeiwerte für die Bemessung korrosionsgeschädigter Gashochdruckleitungen auf Basis von Versagenswahrscheinlichkeiten und stellt ein Anwendungskonzept zu deren Nutzung vor.
The evolution of urbanism under dictatorship forms the core of the current research. This thesis is part of a research network at Bauhaus-Universität Weimar, which studies the 20th century's urbanism under different dictatorships. The network has provided a cross-cultural and cross-border environment and has enabled the author to communicate with other like-minded researchers. The 2015 published book of this group 'Urbanism and Dictatorship: A European Perspective' strengthens the foundation of this research's theoretical and methodological framework.
This thesis investigates urban policies and plans leading to the advancement of urbanization and the transformation of urban space in Iran during the second Pahlavi (1941-1979) when the country faced a milestone in its history: Nationalization of the Iranian oil industry. By reflecting the influence of economic and socio‐political determinants of the time on urbanism and the urbanization process, this work intends to critically trace the effect of dictatorship on evolved urbanism before and after the oil nationalization in 1951.
The research on the second Pahlavi's urbanism has been limitedly addressed and has only recently expanded. Most of the conducted studies date back to less than a decade ago and could not incorporate all the episodes of the second Pahlavi urbanism. These works have often investigated urbanism and architecture by focusing merely on the physical features and urban products in different years regardless of the importance of urbanism as a tool in the service of hegemony. In other words, the majority of the available literature does not intend to address the socio-economic and political roots of urban transformations and by questioning 'what has been built?' investigates the individual urban projects and plans designed by individual designers without interlinking these projects to the state's urban planning program and tracing the beneficiaries of those projects or questioning 'built for whom?'
Moreover, some chapters of this modern urbanism have rarely been investigated. For instance, scant research has looked into the works of foreign designers and consultants involved in the projects such as Peter Georg Ahrens or Constantinos A. Doxiadis. Similarly, the urbanism of the first decade of the second Pahlavi, including the government of Mossadegh, has mainly been overlooked.
Therefore, by critically analyzing the state's urban planning program and the process of urbanization in Iran during the second Pahlavi, this research aims to bridge the literature gap and to unravel the effect of the power structure on urban planning and products while seeking to find a pattern behind the regime's policies.
The main body of this work is concentrated on studying the history of urbanism in Iran, of which collecting data and descriptions played a crucial role. To prevent the limitations associated with singular methods, this research's methodology is based on methodological triangulation (Denzin, 2017). With the triangulation scheme, the data is gathered by combining different qualitative and quantitative methods such as the library, archival and media research, online resources, non-participatory observation, and photography. For the empirical part, the city of Tehran is selected as the case study. Moreover, individual non-structured interviews with the locals were conducted to gain more insights regarding urban projects.
Marine Makroalgen besitzen vielversprechende Eigenschaften und Inhaltsstoffe für die Verwendung als Energieträger, Nahrungsmittel oder als Ausgangsstoff für Pharmazeutika. Dass die Quantität und Qualität der in natürlicher Umgebung wachsenden Makroalgen schwankt, reduziert jedoch deren Verwertbarkeit und erschwert die Erschließung hochpreisiger Marktsegmente. Zudem ist eine Ausweitung der Zucht in marinen und küstennahen Aquakulturen in Europa gegenwärtig wenig aussichtsreich, da vielversprechende Areale bereits zum Fischfang oder als Erholungs- bzw. Naturschutzgebiete ausgewiesen sind. Im Rahmen dieser Arbeit wird demzufolge ein geschlossenes Photobioreaktorsystem zur Makroalgenkultivierung entwickelt, welches eine umfassende Kontrolle der abiotischen Kultivierungsparameter und eine effektive Aufbereitung des Kulturmediums vorsieht, um eine standortunabhängige Algenproduktion zu ermöglichen. Zur Bilanzierung des Gesamtkonzeptes einer Kultivierung und Verwertung (stofflich oder energetisch) werden die spezifischen Wachstumsraten und Methanbildungspotentiale der Algenarten Ulva intestinalis, Fucus vesiculosus und Palmaria palmata in praktischen Versuchen ermittelt.
Im Ergebnis wird für den gegenwärtigen Entwicklungsstand der Kultivierungsanlage eine positive Bilanz für die stoffliche Verwertung der Algenart Ulva intestinalis und eine negative Bilanz für die energetische Verwertung aller untersuchten Algenarten erzielt. Wird ein Optimalszenario betrachtet, indem die Besatzdichten und Wachstumsraten der Algen in der Zucht erhöht werden, bleibt die Energiebilanz negativ. Allerdings summieren sich die finanzielle Einnahmen durch einen Verkauf der Algen als Produkt auf jährlich 460.869€ für Ulva intestinalis, 4.010€ für Fucus vesiculosus und 16.913€ für Palmaria palmata. Im Ergebnis ist insbesondere eine stoffliche Verwertung der gezüchteten Grünalge Ulva intestinalis anzustreben und die Produktivität der Zuchtanlage im Sinne des Optimalszenarios zu steigern.
This study permits a reliability analysis to solve the mechanical behaviour issues existing in the current structural design of fabric structures. Purely predictive material models are highly desirable to facilitate an optimized design scheme and to significantly reduce time and cost at the design stage, such as experimental characterization.
The present study examined the role of three major tasks; a) single-objective optimization, b) sensitivity analyses and c) multi-objective optimization on proposed weave structures for woven fabric composites. For single-objective optimization task, the first goal is to optimize the elastic properties of proposed complex weave structure under unit cells basis based on periodic boundary conditions.
We predict the geometric characteristics towards skewness of woven fabric composites via Evolutionary Algorithm (EA) and a parametric study. We also demonstrate the effect of complex weave structures on the fray tendency in woven fabric composites via tightness evaluation. We utilize a procedure which does not require a numerical averaging process for evaluating the elastic properties of woven fabric composites. The fray tendency and skewness of woven fabrics depends upon the behaviour of the floats which is related to the factor of weave. Results of this study may suggest a broader view for further research into the effects of complex weave structures or may provide an alternative to the fray and skewness problems of current weave structure in woven fabric composites.
A comprehensive study is developed on the complex weave structure model which adopts the dry woven fabric of the most potential pattern in singleobjective optimization incorporating the uncertainties parameters of woven fabric composites. The comprehensive study covers the regression-based and variance-based sensitivity analyses. The second task goal is to introduce the fabric uncertainties parameters and elaborate how they can be incorporated into finite element models on macroscopic material parameters such as elastic modulus and shear modulus of dry woven fabric subjected to uni-axial and biaxial deformations. Significant correlations in the study, would indicate the need for a thorough investigation of woven fabric composites under uncertainties parameters. The study describes here could serve as an alternative to identify effective material properties without prolonged time consumption and expensive experimental tests.
The last part focuses on a hierarchical stochastic multi-scale optimization approach (fine-scale and coarse-scale optimizations) under geometrical uncertainties parameters for hybrid composites considering complex weave structure. The fine-scale optimization is to determine the best lamina pattern that maximizes its macroscopic elastic properties, conducted by EA under the following uncertain mesoscopic parameters: yarn spacing, yarn height, yarn width and misalignment of yarn angle. The coarse-scale optimization has been carried out to optimize the stacking sequences of symmetric hybrid laminated composite plate with uncertain mesoscopic parameters by employing the Ant Colony Algorithm (ACO). The objective functions of the coarse-scale optimization are to minimize the cost (C) and weight (W) of the hybrid laminated composite plate considering the fundamental frequency and the buckling load factor as the design constraints.
Based on the uncertainty criteria of the design parameters, the appropriate variation required for the structural design standards can be evaluated using the reliability tool, and then an optimized design decision in consideration of cost can be subsequently determined.
Space is a social product and a social producer. The main aim of this thesis is to reveal ‘the process of totalitarian city making in Pyongyang’, especially in the light of the interaction between the power and urban space.
The totalitarian city of Pyongyang was born out of modernization in the process of masses formation. During the growth of colonial capitalism and Christian liberal ideas, Pyongyang was modernized and displayed the characteristics of a modern city with industrialization and urbanization. During the introduction of Japanese colonial capitalism, peasants, women, and slaves became the first masses and urban poor, and they later transformed into the mob; their violence was finally demonstrated during the Anti-Chinese Riot.
After the 1945 independence, Kim’s regime formed the one-party state with a cry for revolution. They produced an atmosphere of imminent war to instill fear and hatred into the psyche of Pyongyang citizens. The regime eliminated all political opponents in 1967 and finally declared the totalitarian ideology in 1974. During this process, Pyongyang demonstrated two main characteristics of a totalitarian city: the space of terror and of ideology. The space of terror produces the fear of death and the space of ideology controls the thought and life of citizens.
After entry to the market, to keep Kim’s controlling power, the regime used the strategy of location exchange. The camp, market, and Foreign Currency Shop were effective tools to prepare for executives’ gifts. However, the market also produces the desire not only for consumption but also for freedom and truth; it is tearing down the foundation of the totalitarian city of Pyongyang.
This research focuses primarily on the interaction between political power and urban space. In the process of making a totalitarian city, the power produced urban space and it influenced the psyche of Pyongyang citizens. Even though this spatial transition has created the totalitarian city and helped maintain political power, it also led and produced intended or unintended social variation in Pyongyang society.
Rechargeable lithium ion batteries (LIBs) play a very significant role in power supply and storage. In recent decades, LIBs have caught tremendous attention in mobile communication, portable electronics, and electric vehicles. Furthermore, global warming has become a worldwide issue due to the ongoing production of greenhouse gases. It motivates solutions such as renewable sources of energy. Solar and wind energies are the most important ones in renewable energy sources. By technology progress, they will definitely require batteries to store the produced power to make a balance between power generation and consumption. Nowadays,rechargeable batteries such as LIBs are considered as one of the best solutions. They provide high specific energy and high rate performance while their rate of self-discharge is low.
Performance of LIBs can be improved through the modification of battery characteristics. The size of solid particles in electrodes can impact the specific energy and the cyclability of batteries. It can improve the amount of lithium content in the electrode which is a vital parameter in capacity and capability of a battery. There exist diferent sources of heat generation in LIBs such as heat produced during electrochemical reactions, internal resistance in battery. The size of electrode's electroactive particles can directly affect the produced heat in battery. It will be shown that the smaller size of solid particle enhance the thermal characteristics of LIBs.
Thermal issues such as overheating, temperature maldistribution in the battery, and thermal runaway have confined applications of LIBs. Such thermal challenges reduce the Life cycle of LIBs. As well, they may lead to dangerous conditions such as fire or even explosion in batteries. However, recent advances in fabrication of advanced materials such as graphene and carbon nanotubes with extraordinary thermal conductivity and electrical properties propose new opportunities to enhance their performance. Since experimental works are expensive, our objective is to use computational methods to investigate the thermal issues in LIBS. Dissipation of the heat produced in the battery can improve the cyclability and specific capacity of LIBs. In real applications, packs of LIB consist several battery cells that are used as the power source. Therefore, it is worth to investigate thermal characteristic of battery packs under their cycles of charging/discharging operations at different applied current rates. To remove the produced heat in batteries, they can be surrounded by materials with high thermal conductivity. Parafin wax absorbs high energy since it has a high latent heat. Absorption high amounts of energy occurs at constant temperature without phase change. As well, thermal conductivity of parafin can be magnified with nano-materials such as graphene, CNT, and fullerene to form a nano-composite medium. Improving the thermal conductivity of LIBs increase the heat dissipation from batteries which is a vital issue in systems of battery thermal management. The application of two-dimensional (2D) materials has been on the rise since exfoliation the graphene from bulk graphite. 2D materials are single-layered in an order of nanosizes which show superior thermal, mechanical, and optoelectronic properties. They are potential candidates for energy storage and supply, particularly in lithium ion batteries as electrode material. The high thermal conductivity of graphene and graphene-like materials can play a significant role in thermal management of batteries. However, defects always exist in nano-materials since there is no ideal fabrication process. One of the most important defects in materials are nano-crack which can dramatically weaken the mechanical properties of the materials. Newly synthesized crystalline carbon nitride with the stoichiometry of C3N have attracted many attentions due to its extraordinary mechanical and thermal properties. The other nano-material is phagraphene which shows anisotropic mechanical characteristics which is ideal in production of nanocomposite.
It shows ductile fracture behavior when subjected under uniaxial loadings. It is worth to investigate their thermo-mechanical properties in its pristine and defective states. We hope that the findings of our work not only be useful for both experimental and theoretical researches but also help to design advanced electrodes for LIBs.
Vor dem Hintergrund einer stetig wachsenden Nachfrage an Beton wie auch ambitionierter Reduktionsziele beim in der Zementproduktion anfallenden CO2 gelten calcinierte Tone als derzeit aussichtsreichste technische Neuerung im Bereich nachhaltiger Bindemittelkonzepte. Unter Ausnutzung ihrer Puzzolanität soll ein erheblicher Teil der Klinkerkomponente im Zement ersetzt werden, wobei der zu ihrer Aktivierung notwendige Energiebedarf vergleichsweise niedrig ist. Wesentliche Vorteile der Tone sind ihre weltweit nahezu unbegrenzte Verfügbarkeit sowie der äußerst geringe rohstoffbedingte CO2-Ausstoß während der Calcinierung. Schwierigkeiten auf dem Weg der Umsetzung bestehen allerdings in der Vielseitigkeit des Systems, welches durch eine hohe Varietät der Rohtone und des daraus folgenden thermischen Verhaltens gekennzeichnet ist. Entsprechend schwierig ist die Übertragbarkeit von Erfahrungen mit bereits etablierten calcinierten Tonen wie dem Metakaolin, der sich durch hohe Reinheit, einen aufwendigen Aufbereitungsprozess und eine entsprechend hohe Reaktivität auszeichnet. Ziel der Arbeit ist es daher, den bereits erlangten Kenntnisstand auf andere, wirtschaftlich relevante Tone zu erweitern und deren Eignung für die Anwendung im Beton herauszuarbeiten.
In einem mehrstufigen Arbeitsprogramm wurde untersucht, inwieweit großtechnisch nutzbare Tone aktivierbar sind und welche Eigenschaften sich daraus für Zement und Beton ergeben. Die dabei festgestellte Reihenfolge Kaolinit > Montmorillonit > Illit beschreibt sowohl die Reaktivität der Brennprodukte als auch umgekehrt die Höhe der optimalen Calciniertemperatur. Auch wandelt sich der Charakter der entstandenen Metaphasen in dieser Abfolge von röntgenamorph und hochreaktiv zu glasig und reaktionsträge. Trotz dieser Einordnung konnte selbst mit dem Illit eine mit Steinkohlenflugasche vergleichbare Puzzolanität festgestellt werden. Dies bestätigte sich anschließend in Parameterversuchen, bei denen die Einflüsse von Rohstoffqualität, Calcinierung, Aufbereitung und Zement hinsichtlich der Reaktivitätsausbeute bewertet wurden. Die Bandbreite der erzielbaren Qualitäten ist dabei immens und gipfelt nicht zuletzt in stark unterschiedlichen Wirkungen auf die Festbetoneigenschaften. Hier machte sich vor allem die für Puzzolane typische Porenverfeinerung bemerkbar, sodass viele von Transportvorgängen abhängige Schadmechanismen unterdrückt wurden. Andere Schadex-positionen wie der Frostangriff ließen sich durch Zusatzmaßnahmen wie dem Eintrag von Luftporen beherrschen. Zu bemängeln sind vor allem die schlechte Verarbeitbarkeit kaolinitischer Metatone wie auch die für Puzzolane stark ausgeprägte Carbonatisierungsneigung.
Wesentliches Ergebnis der Arbeit ist, dass auch Tone, die bisher als geringwertig bezüglich des Aktivierungspotentials galten, nutzbare puzzolanische Eigenschaften entwickeln können. So kann selbst ein stark verunreinigter Illit-Ton die Qualität von Flugasche erreichen. Mit stei-gendem Tonmineralgehalt sowie bei Präsens thermisch instabilerer Tonminerale wie Mont-morillonit und Kaolinit erweitert sich das Spektrum nutzbarer Puzzolanitäten bis hin zur hochreaktiven Metakaolin-Qualität. Damit lassen sich gute bis sehr gute Betoneigenschaften erzielen, sodass die Leistungsfähigkeit etablierter Kompositmaterialien erreicht wird. Somit sind die Voraussetzungen für eine umfangreiche Nutzung der erheblichen Tonmengen im Zement und Beton gegeben. Entsprechend können Tone einen effektiven Beitrag zu einer gesteigerten Nachhaltigkeit in der Baustoffproduktion weltweit leisten.
Synergistic Framework for Analysis and Model Assessment in Bridge Aerodynamics and Aeroelasticity
(2020)
Wind-induced vibrations often represent a major design criterion for long-span bridges. This work deals with the assessment and development of models for aerodynamic and aeroelastic analyses of long-span bridges.
Computational Fluid Dynamics (CFD) and semi-analytical aerodynamic models are employed to compute the bridge response due to both turbulent and laminar free-stream. For the assessment of these models, a comparative methodology is developed that consists of two steps, a qualitative and a quantitative one. The first, qualitative, step involves an extension
of an existing approach based on Category Theory and its application to the field of bridge aerodynamics. Initially, the approach is extended to consider model comparability and completeness. Then, the complexity of the CFD and twelve semi-analytical models are evaluated based on their mathematical constructions, yielding a diagrammatic representation of model quality.
In the second, quantitative, step of the comparative methodology, the discrepancy of a system response quantity for time-dependent aerodynamic models is quantified using comparison metrics for time-histories. Nine metrics are established on a uniform basis to quantify the discrepancies in local and global signal features that are of interest in bridge aerodynamics. These signal features involve quantities such as phase, time-varying frequency and magnitude content, probability density, non-stationarity, and nonlinearity.
The two-dimensional (2D) Vortex Particle Method is used for the discretization of the Navier-Stokes equations including a Pseudo-three dimensional (Pseudo-3D) extension within an existing CFD solver. The Pseudo-3D Vortex Method considers the 3D structural behavior for aeroelastic analyses by positioning 2D fluid strips along a line-like structure. A novel turbulent Pseudo-3D Vortex Method is developed by combining the laminar Pseudo-3D VPM and a previously developed 2D method for the generation of free-stream turbulence. Using analytical derivations, it is shown that the fluid velocity correlation is maintained between the CFD strips.
Furthermore, a new method is presented for the determination of the complex aerodynamic admittance under deterministic sinusoidal gusts using the Vortex Particle Method. The sinusoidal gusts are simulated by modeling the wakes of flapping airfoils in the CFD domain with inflow vortex particles. Positioning a section downstream yields sinusoidal forces that are used for determining all six components of the complex aerodynamic admittance. A closed-form analytical relation is derived, based on an existing analytical model. With this relation, the inflow particles’ strength can be related with the target gust amplitudes a priori.
The developed methodologies are combined in a synergistic framework, which is applied to both fundamental examples and practical case studies. Where possible, the results are verified and validated. The outcome of this work is intended to shed some light on the complex wind–bridge interaction and suggest appropriate modeling strategies for an enhanced design.
Diese Dissertation beschäftigt sich mit Kunstwerken, die das alltägliche Ding in den Blick nehmen. Nährboden dieser Kunstform sind die soziokulturellen Entwicklungen des 20. Jahrhunderts, mit denen wesentliche Veränderungen hinsichtlich des Verhältnisses von Mensch und Ding einhergingen.
Daraus resultierte eine allgemeine künstlerische Zuwendung zu den Dingen und eine einzigartige Kulmination aus verschiedenartigen Auseinandersetzungen mit ihnen als kunstfähige Gegenstände, über die sich die neue Dingwelt erschlossen wurde und deren Kunstwerke einen Spiegel dieser Entwicklungen darstellen.
Die Dissertation stellt ebenfalls die Dinge selbst in den Fokus. Vier Aspekte von Dingen (Materialität, Funktionalität, Repräsentationalität und Relationalität) werden gesondert ins Auge gefasst und in den theoretischen Diskurs des 20. Jahrhunderts eingeordnet, um sie als Teil der gelebten Realität besser zu verstehen, von der sich der ästhetische Blick nicht trennen lässt. Anhand der künstlerischen Positionen von Robert Rauschenberg, Christo und Jeanne-Claude, Daniel Spoerri und Arman sowie Claes Oldenburg werden die verschiedenen Aspekte der Dinge näher betrachtet und analysiert, wie diese speziell in den Kunstwerken thematisiert werden und welche Relevanz sie für deren Rezeptionserfahrung haben.
Die Korrelation dieser beiden Ebenen - die Dinge als konstitutiver Bestandteil im sozialen Raum und die Dinge als Elemente in Kunstwerken -, die im Fokus der vorliegenden Untersuchung steht, ermöglicht es, die künstlerische Zuwendung zu den Dingen in den 1960er-Jahren neu einzuordnen. Darüber hinaus wird dadurch ein differenziertes Bild von der Kunst dieser Zeit sowie den Dingen in der Kunst im Allgemeinen gezeichnet.
In einer systematischen Interpretation von Vilém Flussers Werk schlägt die Arbeit vor, Flussers Ansatz als einen medienphilosophischen zu verstehen, insofern er das „wie“ der medienphilosophischen Fragestellung in den Mittelpunkt rückt. Medien werden nicht erst dann zu einem wesentlichen Bestandteil von Flussers Philosophie, wenn er sie explizit zum Gegenstand seiner Untersuchungen der gegenwärtigen Kultur und Gesellschaft oder historischer Rückblicke macht; Denken vollzieht sich immer in Medien oder medialen Praktiken, es wird nicht nur von ihnen (mit) geprägt – ohne Medien gäbe es kein Denken und umgekehrt verändert sich Philosophie mit den (jeweils) neuen Medien. Ausgehend von Begriffen oder eher Denkfiguren, die neben dem „was“ des jeweils verhandelten Themas auch das „wie“ der Reflexion selbst adressieren, wird der „Umbruch in der Struktur des Denkens“ zugleich als Beschreibung von Medienumbrüchen verstanden – mit dem Fluchtpunkt des Sprungs in das Universum der Komputation – und als Vollzug der gegenwärtigen Veränderung der „Methode des Denkens“. Flussers (Ver)Suche einer Reflexion, die nicht mehr durch das Medium Schrift strukturiert ist, sondern sowohl alten Medien wie dem Bild – bzw. Praktiken des Abbildens, Darstellens, Einbildens usw. – als auch neuen Medien – dem Komputieren – Geltung verschafft, laufen auf eine widersprüchliche Diagnose des neuen Universums der Komputation (anders: der technischen Bilder) hinaus : eine kybermetisch inspirierte Vision der frei modellierbaren Wirklichkeit(en) einerseits und die Dystopie einer Welt, in der Apparaten Denken, Wahrnehmen und Handeln beherrschen andererseits. Die Arbeit zeigt auf, wie Flusser zu dieser Aporie der Medienreflexion – die weit über Flussers Werk hinaus virulent bleibt – gelangt und wie sie, ausgehend von seiner Figur der Geste, im Sinne einer performativen Medienreflexion gelöst werden könnte.
This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created.
To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process.
The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents’ lives?
The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience.
Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants.
Self-healing materials have recently become more popular due to their capability to autonomously and autogenously repair the damage in cementitious materials. The concept of self-healing gives the damaged material the ability to recover its stiffness. This gives a difference in comparing with a material that is not subjected to healing. Once this material is damaged, it cannot sustain loading due to the stiffness degradation. Numerical modeling of self-healing materials is still in its infancy. Multiple experimental researches were conducted in literature to describe the behavior of self-healing of cementitious materials. However, few numerical investigations were undertaken.
The thesis presents an analytical framework of self-healing and super healing materials based on continuum damage-healing mechanics. Through this framework, we aim to describe the recovery and strengthening of material stiffness and strength. A simple damage healing law is proposed and applied on concrete material. The proposed damage-healing law is based on a new time-dependent healing variable. The damage-healing model is applied on isotropic concrete material at the macroscale under tensile load. Both autonomous and autogenous self-healing mechanisms are simulated under different loading conditions. These two mechanisms are denoted in the present work by coupled and uncoupled self-healing mechanisms, respectively. We assume in the coupled self-healing that the healing occurs at the same time with damage evolution, while we assume in the uncoupled self-healing that the healing occurs when the material is deformed and subjected to a rest period (damage is constant). In order to describe both coupled and uncoupled healing mechanisms, a one-dimensional element is subjected to different types of loading history.
In the same context, derivation of nonlinear self-healing theory is given, and comparison of linear and nonlinear damage-healing models is carried out using both coupled and uncoupled self-healing mechanisms. The nonlinear healing theory includes generalized nonlinear and quadratic healing models. The healing efficiency is studied by varying the values of the healing rest period and the parameter describing the material characteristics. In addition, theoretical formulation of different self-healing variables is presented for both isotropic and anisotropic maerials. The healing variables are defined based on the recovery in elastic modulus, shear modulus, Poisson's ratio, and bulk modulus. The evolution of the healing variable calculated based on cross-section as function of the healing variable calculated based on elastic stiffness is presented in both hypotheses of elastic strain equivalence and elastic energy equivalence. The components of the fourth-rank healing tensor are also obtained in the case of isotropic elasticity, plane stress and plane strain.
Recent research revealed that self-healing presents a crucial solution also for the strengthening of the materials. This new concept has been termed ``Super Healing``. Once the stiffness of the material is recovered, further healing can result as a strengthening material. In the present thesis, new theory of super healing materials is defined in isotropic and anisotropic cases using sound mathematical and mechanical principles which are applied in linear and nonlinear super healing theories. Additionally, the link of the proposed theory with the theory of undamageable materials is outlined. In order to describe the super healing efficiency in linear and nonlinear theories, the ratio of effective stress to nominal stress is calculated as function of the super healing variable. In addition, the hypotheses of elastic strain and elastic energy equivalence are applied. In the same context, new super healing matrix in plane strain is proposed based on continuum damage-healing mechanics.
In the present work, we also focus on numerical modeling of impact behavior of reinforced concrete slabs using the commercial finite element package Abaqus/Explicit. Plain and reinforced concrete slabs of unconfined compressive strength 41 MPa are simulated under impact of ogive-nosed hard projectile. The constitutive material modeling of the concrete and steel reinforcement bars is performed using the Johnson-Holmquist-2 damage and the Johnson-Cook plasticity material models, respectively. Damage diameters and residual velocities obtained by the numerical model are compared with the experimental results and effect of steel reinforcement and projectile diameter is studied.
The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part.
First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images.
Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids.
Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1
continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.