Refine
Has Fulltext
- yes (91) (remove)
Document Type
- Conference Proceeding (38)
- Doctoral Thesis (16)
- Part of a Book (10)
- Article (8)
- Bachelor Thesis (8)
- Master's Thesis (3)
- Book (2)
- Periodical (2)
- Study Thesis (2)
- Habilitation (1)
- Sound (1)
Institute
- Graduiertenkolleg 1462 (19)
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (19)
- Universitätsbibliothek (11)
- Professur Bauphysik (8)
- Professur Informatik in der Architektur (6)
- F. A. Finger-Institut für Baustoffkunde (FIB) (4)
- Institut für Strukturmechanik (ISM) (4)
- An-Institute (2)
- Institut für Europäische Urbanistik (2)
- Professur Bauchemie und Polymere Werkstoffe (2)
Keywords
- Angewandte Informatik (36)
- Angewandte Mathematik (36)
- Computerunterstütztes Verfahren (36)
- Elektronisches Buch (7)
- Bauphysik (3)
- Bibliothek (3)
- E-Book-Reader (3)
- Urheberrecht (3)
- Architektur (2)
- Beton (2)
Year of publication
- 2012 (91) (remove)
A simple multiscale analysis framework for heterogeneous solids based on a computational homogenization technique is presented. The macroscopic strain is linked kinematically to the boundary displacement of a circular or spherical representative volume which contains the microscopic information of the material. The macroscopic stress is obtained from the energy principle between the macroscopic scale and the microscopic scale. This new method is applied to several standard examples to show its accuracy and consistency of the method proposed.
The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It’s a fact that the temperature developing while polishing determines the reachable surface smoothing and, as a negative result, causes material tensions. To find out which parameters are important for the laser polishing process and the surface roughness respectively and to estimate material tensions, temperature simulations and extensive polishing experiments took place. During these experiments starting and machining parameters were changed and temperatures were measured contact-free. The accuracy of thermal and mechanical simulation was improved in the case of advanced FE-analysis.
Aktionsräume in Dresden
(2012)
In vorliegender Studie werden die Aktionsräume von Befragten in Dresden über eine standardisierte Befragung (n=360) untersucht. Die den Aktionsräumen zugrundeliegenden Aktivitäten werden unterschieden in Einkaufen für den täglichen Bedarf, Ausgehen (z.B. in Café, Kneipe, Gaststätte), Erholung im Freien (z.B. spazieren gehen, Nutzung von Grünanlagen) und private Geselligkeit (z.B. Feiern, Besuch von Verwandten/Freunden). Der Aktionsradius wird unterschieden in Wohnviertel, Nachbarviertel und sonstiges weiteres Stadtgebiet. Um aus den vier betrachteten Aktivitäten einen umfassenden Kennwert für den durchschnittlichen Aktionsradius eines Befragten zu bilden, wird ein Modell für den Kennwert eines Aktionsradius entwickelt. Die Studie kommt zu dem Ergebnis, dass das Alter der Befragten einen signifikanten – wenn auch geringen – Einfluss auf den Aktionsradius hat. Das Haushaltsnettoeinkommen hat einen mit Einschränkung signifikanten, ebenfalls geringen Einfluss auf alltägliche Aktivitäten der Befragten.
Es ist ein Bild aus alten Tagen: ein wissbegieriger Student, auf der Suche nach fundierter wissenschaftlicher Information, begibt sich an den heiligsten Ort aller Bücher – die Universitätsbibliothek. Doch seit einiger Zeit tummeln sich Studierende nicht mehr nur in Bibliotheken, sondern auch immer häufiger im Internet. Sie suchen und finden dort digitale Bücher, sogenannte E-Books.
Wie lässt sich der Wandel durch den Einzug des E-Books in das etablierte Forschungssystem beschreiben, welche Konsequenzen lassen sich daraus ablesen und wird schließlich alles digital, sogar die Bibliothek? Diesen Fragen geht ein elfköpfiges Expertenteam aus Deutschland und der Schweiz während der zweitägigen Konferenz auf den Grund.
Bei den Weimarer E-DOC-Tagen geht es nun um die Veränderung des institutionellen Gefüges rund um das digitale Buch. Denn traditionell sind Verlage und Bibliotheken wichtige Bestandteile der Wissensversorgung in Studium und Lehre. Doch mit dem Aufkommen des E-Books verlagert sich die Recherche mehr und mehr ins Internet. Die Suchmaschine Google tritt als neuer Konkurrent der klassischen Bibliotheksrecherche auf. Aber auch Verlage müssen verstärkt auf die neuen Herausforderungen eines digitalen Buchmarktes reagieren.
In Kooperation mit der Universitätsbibliothek und dem Master-Studiengang Medienmanagement diskutieren Studierende, Wissenschaftler, Bibliothekare und Verleger, wie das E-Book unseren Umgang mit Literatur verändert. Der Tagungsband stellt alle Perspektiven und Ergebnisse zum Nachlesen zusammen.
Die Arbeit »Anachronismen: Historiografie und Kino« geht von einer zunächst einfachen Beobachtung aus: beinahe immer, wenn Historiker_innen sich mit Geschichtsfilmen auseinander setzen, findet sich die lautstark geführte Beschwerde über die zahlreichen und vermeidbaren Anachronismen der Filme, die sie als ernst zu nehmende historiografische Beiträge desavouieren.
Von hier ausgehend verfolgt die Arbeit ein dreifaches Projekt: zunächst in einer kritischen Analyse geschichtstheoretischer Texte einige Hinweise für den Status von Anachronismen für die moderne westliche Historiografie zu gewinnen. Zweitens zu untersuchen, welche Rolle Anachronismen für den Geschichtsfilm spielen. Und drittens von dort aus das epistemische Potential anachronistischen Geschichtskinos zu untersuchen.
Eine der Hauptthesen, welche den Blick sowohl auf die Filme wie auf die theoretischen Texte leitet, besagt, dass Anachronismen genau jene Punkte sind, an denen die Medien einer jeden Geschichtsschreibung beobachtbar werden. Die Beobachtung und Beschreibung dieser Medien der kinematografischen Geschichtsschreibung unternimmt die Arbeit unter Zuhilfenahme einiger theoretischer Überlegungen der Actor Network Theory (ANT).
Die Arbeit ist in vier Kapitel gegliedert, in deren Zentrum jeweils die Diskussion eines ANT-Begriffs sowie die Analyse eines Geschichtsfilmes steht. Zu den untersuchten Filmen gehören Shutter Island (Martin Scorsese, 2010), Chronik der Anna Magdalena Bach (Jean-Marie Straub/Danièle Huillet, 1968), Cleopatra (Joseph L. Mankiewicz, 1963) und Caravaggio (Derek Jarman, 1986). Die Arbeit kommentiert außerdem theoretische Texte zur Historiografie und zu Anachronismen von Walter Benjamin, Leo Bersani, Georges Didi-Huberman, Siegfried Kracauer, Friedrich Meinecke, Friedrich Nietzsche, Jacques Rancière, Leopold Ranke, Paul Ricœur, Georg Simmel, Hayden White u. a.
A numerical analysis of the mode of deformation of the main load-bearing components of a typical frame sloping shaft headgear was performed. The analysis was done by a design model consisting of plane and solid finite elements, which were modeled in the program «LIRA». Due to the numerical results, the regularities of local stress distribution under a guide pulley bearing were revealed and parameters of a plane stress under both emergency and normal working loads were determined. In the numerical simulation, the guidelines to improve the construction of the joints of guide pulleys resting on sub-pulley frame-type structures were established. Overall, the results obtained are the basis for improving the engineering procedures of designing steel structures of shaft sloping headgear.
Bridge vibration due to traffic loading has been a subject of extensive research in the last decades. The focus of such research has been to develop solution algorithms and investigate responses or behaviors of interest. However, proving the quality and reliability of the model output in structural engineering has become a topic of increasing importance. Therefore, this study is an attempt to extend concepts of uncertainty and sensitivity analyses to assess the dynamic response of a coupled model in bridge engineering considering time-dependent vehicular loading. A setting for the sensitivity analysis is proposed, which enables performing the sensitivity analysis considering random stochastic processes. The classical and proposed sensitivity settings are used to identify the relevant input parameters and models that have the most influence on the variance of the dynamic response. The sensitivity analysis exercises the model itself and extracts results without the need for measurements or reference solutions; however, it does not offer a means of ranking the coupled models studied. Therefore, concepts of total uncertainty are employed to rank the coupled models studied according to their fitness in describing the dynamic problem.
The proposed procedures are applied in two examples to assess the output of coupled subsystems and coupled partial models in bridge engineering considering the passage of a heavy vehicle at various speeds.
Numerical simulations in the general field of civil engineering are common for the design process of structures and/or the assessment of existing buildings. The behaviour of these structures is analytically unknown and is approximated with numerical simulation methods like the Finite Element Method (FEM). Therefore the real structure is transferred into a global model (GM, e.g. concrete bridge) with a wide range of sub models (partial models PM, e.g. material modelling, creep). These partial models are coupled together to predict the behaviour of the observed structure (GM) under different conditions. The engineer needs to decide which models are suitable for computing realistically and efficiently the physical processes determining the structural behaviour. Theoretical knowledge along with the experience from prior design processes will influence this model selection decision. It is thus often a qualitative selection of different models. The goal of this paper is to present a quantitative evaluation of the global model quality according to the simulation of a bridge subject to direct loading (dead load, traffic) and indirect loading (temperature), which induce restraint effects. The model quality can be separately investigated for each partial model and also for the coupled partial models in a global structural model. Probabilistic simulations are necessary for the evaluation of these model qualities by using Uncertainty and Sensitivity Analysis. The method is applied to the simulation of a semi-integral concrete bridge with a monolithic connection between the superstructure and the piers, and elastomeric bearings at the abutments. The results show that the evaluation of global model quality is strongly dependent on the sensitivity of the considered partial models and their related quantitative prediction quality. This method is not only a relative comparison between different models, but also a quantitative representation of model quality using probabilistic simulation methods, which can support the process of model selection for numerical simulations in research and practice.
Dieses Arbeitspapier beschreibt, wie ausgehend von einem vorhandenen Straßennetzwerk Bebauungsareale mithilfe von Unterteilungsalgorithmen automatisch umgelegt, d.h. in Grundstücke unterteilt, und anschließend auf Basis verschiedener städtebaulicher Typen bebaut werden können. Die Unterteilung von Bebauungsarealen und die Generierung von Bebauungsstrukturen unterliegen dabei bestimmten stadtplanerischen Einschränkungen, Vorgaben und Parametern. Ziel ist es aus den dargestellten Untersuchungen heraus ein Vorschlagssystem für stadtplanerische Entwürfe zu entwickeln, das anhand der Umsetzung eines ersten Softwareprototyps zur Generierung von Stadtstrukturen weiter diskutiert wird.
In crowdsourcingbasierten Systemen kommt der Qualitätssicherung des durch Benutzer generierten Inhaltes große Bedeutung für die Erhaltung der Benutzbarkeit zu. Das bauphysikalische Lehrspiel "BuildVille" benutzt für die Quiz-Anwendung einen Crowdsourcing-Ansatz: Die Quiz-Fragen werden von den Benutzern selbst generiert. Mit Hilfe dieser Arbeit soll sichergestellt werden, dass fehlerhafte, irrtümlicherweise oder zum Spaß eingegebene Fragen möglichst früh erkannt, korrigiert oder von der weiteren Verbreitung ausgeschlossen werden. Dazu soll mit Hilfe einer Analyse bestehender crowdsourcingbasierter Systeme bezüglich umgesetzter Qualitätssicherungsmaßnahmen ein Konzept für die QS-Maßnahmen in BuildVille entwickelt werden.
BAUHAUS ISOMETRY AND FIELDS
(2012)
While integration increases by networking, segregation strides ahead too. Most of us fixate our mind on special topics. Yet we are relying on our intuition too. We are sometimes waiting for the inflow of new ideas or valuable information that we hold in high esteem, although we are not entirely conscious of its origin. We may even say the most precious intuitions are rooting in deep subconscious, collective layers of the mind. Take as a simple example the emergence of orientation in paleolithic events and its relation to the dihedral symmetry of the compass. Consider also the extension of this algebraic matter into the operational structures of the mind on the one hand and into the algebra of geometry, Clifford algebra as we use to call it today, on the other. Culture and mind, and even the individual act of creation may be connected with transient events that are subconscious and inaccessible to cognition in principle. Other events causative for our work may be merely invisible too us, though in principle they should turn out attainable. In this case we are just ignorant of the whole creative process. Sometimes we begin to use unusual tools or turn into handicraft enthusiasts. Then our small institutes turn into workshops and factories. All this is indeed joining with the Bauhaus and its spirit. We shall go together into this, and we shall present a record of this session.
Bauphysikalisches Quartett
(2012)
Quartett ist ein ebenso altes, wie auch beliebtes Kartenspiel. Vor allem bei Kindern erfreut es sich großer Beliebtheit, während in den älteren Generationen kaum jemand mit Quartettkarten spielt.
Quartettspiele speziell für Kleinkinder sind zum Großteil mit Inhalten versehen, die Wissen auf spielerische Art und Weise vermitteln. Dabei werden gute Lernerfolge in dieser Zielgruppe verzeichnet.
Wie lassen sich also diese Lernerfolge durch das Spielen mit Quartettkarten erzielen? Und wie kann dieser Effekt auch auf Studenten übertragen werden?
Ziel dieser Arbeit ist es, das Konzept des Quartettkartenspiels auf bauphysikalische Inhalte anzuwenden und gegebenenfalls die Spielprinzipien zu erweitern oder zu verändern. Dabei sind die Studenten der Fakultät Bauingenieurswesen die Zielgruppe, an die sich das Spiel richten soll.
Besondere Herausforderung ist es, unterschiedliche Objekteklassen von bauphysikalischer Relevanz in einem Spiel zusammenzubringen und vergleichbar zu machen. Das sich ergebende Quartettkartenspiel sollte nicht nur eine Objektklasse, sondern mehrere Objektklassen zum Inhalt haben. Dabei sollen die Objektklassen so gewählt werden, dass sich Kategorien mit bauphysikalischem Inhalt finden lassen.
Augenmerk sollte auch auf die Strukturierung der Lerninhalte gelegt werden, um eine leichte Übertragung des Spielkonzepts auf andere Fachdomänen zu ermöglichen. Das Ergebnis der Arbeit sind zwei fertige und spielbare Quartette.
Ziel dieser Arbeit ist die Entwicklung von Methoden, mit denen die Prognosequalität von Kriechmodellen des Betons bestimmt werden kann. Die Methoden werden in zwei Ausgangsszenarien unterschieden: die Bewertung ohne und die Bewertung mit Verwendung von spezifischen Versuchsdaten zum Kriechverhalten des Betons. Die Modellqualität wird anhand der Gesamtunsicherheit der prognostizierten Kriechnachgiebigkeit quantifiziert. Die Unsicherheit wird für die Kriechprognose ohne Versuchsdaten über eine Unsicherheitsanalyse unter Berücksichtigung korrelierter Eingangsparameter ermittelt. Bei der Verwendung experimenteller Daten werden die stochastischen Eigenschaften der Modellparameter mittels Bayesian Updating bestimmt. Die Bewertung erfolgt erneut basierend auf einer Unsicherheitsanalyse sowie alternativ mittels Modellselektion nach Bayes.
Weiterhin wird eine auf Graphentheorie und Sensitivitätsanalysen basierende Methode zur Bewertung von gekoppelten Partialmodellen entwickelt. Damit wird der Einfluss eines Partialmodells auf das Verhalten einer globalen Tragstruktur quantifiziert, Interaktionen von Partialmodellen festgestellt und ein Maß für die Qualität eines Gesamtmodells ermittelt.
A concept of non-commutative Galois extension is introduced and binary and ternary extensions are chosen. Non-commutative Galois extensions of Nonion algebra and su(3) are constructed. Then ternary and binary Clifford analysis are introduced for non-commutative Galois extensions and the corresponding Dirac operators are associated.
Capturing Sheep With Minecraft befasst sich mit ausgewählten Problemen der Bauphysik und deren Umsetzung mithilfe des Computerspiels Minecraft. Es werden ausgewählte Probleme der Bauphysik in Minecraft abgebildet um diese Schülern und Studenten näher zu bringen. Es wurde ein Szenario in Minecraft entworfen welches durch entgegenwirken der abgebildeten Probleme, durch den Spieler gelöst werden soll.
In this paper we review two distint complete orthogonal systems of monogenic polynomials over 3D prolate spheroids. The underlying functions take on either values in the reduced and full quaternions (identified, respectively, with R3 and R4), and are generally assumed to be nullsolutions of the well known Riesz and Moisil Théodoresco systems in R3. This will be done in the spaces of square integrable functions over R and H. The representations of these polynomials are explicitly given. Additionally, we show that these polynomial functions play an important role in defining the Szegö kernel function over the surface of 3D spheroids. As a concrete application, we prove the explicit expression of the monogenic Szegö kernel function over 3D prolate spheroids.
Electromagnetic wave propagation is currently present in the vast majority of situations which occur in veryday life, whether in mobile communications, DTV, satellite tracking, broadcasting, etc. Because of this the study of increasingly complex means of propagation of lectromagnetic waves has become necessary in order to optimize resources and increase the capabilities of the devices as required by the growing demand for such services.
Within the electromagnetic wave propagation different parameters are considered that characterize it under various circumstances and of particular importance are the reflectance and transmittance. There are several methods or the analysis of the reflectance and transmittance such as the method of approximation by boundary condition, the plane wave expansion method (PWE), etc., but this work focuses on the WKB and SPPS methods.
The implementation of the WKB method is relatively simple but is found to be relatively efficient only when working at high frequencies. The SPPS method (Spectral Parameter Powers Series) based on the theory of pseudoanalytic functions, is used to solve this problem through a new representation for solutions of Sturm Liouville equations and has recently proven to be a powerful tool to solve different boundary value and eigenvalue problems. Moreover, it has a very suitable structure for numerical implementation, which in this case took place in the Matlab software for the valuation of both conventional and turning points profiles.
The comparison between the two methods allows us to obtain valuable information about their perfor mance which is useful for determining the validity and propriety of their application for solving problems where these parameters are calculated in real life applications.
The analysis of the response of complex structural systems requires the description of the material constitutive relations by means of an appropriate material model. The level of abstraction of such model may strongly affect the quality of the prognosis of the whole structure. In context to this fact, it is necessary to describe the material in a convenient sense as exact but as simple as possible. All material phenomena of crystalline materials e.g. steel, affecting the behavior of the structure, rely on physical effects which are interacting over spatial scales from subatomic to macroscopic range. Nevertheless, if the material is microscopically heterogenic, it might be appropriate to use phenomenological models for the purpose of civil engineering. Although constantly applied, these models are insufficient for steel materials with microscopic characteristics such as texture, typically occurring in hot rolled steel members or heat affected zones of welded joints. Hence, texture is manifested in crystalline materials as a regular crystallographic structure and crystallite orientation, influencing macroscopic material properties. The analysis of structural response of material with texture (e.g. rolled steel or heat affected zone of a welded joint) obliges the extension of the phenomenological material description of macroscopic scale by means of microscopic information. This paper introduces an enrichment approach for material models based on a hierarchical multiscale methodology. This has been done by describing the grain texture on a mesoscopic scale and coupling it with macroscopic constitutive relations by means of homogenization. Due to a variety of available homogenization methods, the question of an assessment of coupling quality arises. The applicability of the method and the effect of the coupling method on the reliability of the response are presented on an example.
Radiodiskussion bei bauhaus.fm am 5. November 2012.
Harald S. Liehr ist Lektor und Leiter der Niederlassung Weimar des Böhlau-Verlags (Wien / Köln / Weimar), Dr. Frank Simon-Ritz ist Direktor der Universitätsbibliothek der Bauhaus-Universität Weimar.
Die Fragen stellten René Tauschke und Jean-Marie Schaldach.
Bridge vibration due to traffic loading has been subject of extensive research in the last decades. Such studies are concerned with deriving solutions for the bridge-vehicle interaction (BVI) and analyzing the dynamic responses considering randomness of the coupled model’s (BVI) input parameters and randomness of road unevenness. This study goes further to examine the effects of such randomness of input parameters and processes on the variance of dynamic responses in quantitative measures. The input parameters examined in the sensitivity analysis are, stiffness and damping of vehicle’s suspension system, axle spacing, and stiffness and damping of bridge. This study also examines the effects of the initial excitation of a vehicle on the influences of the considered input parameters. Variance based sensitivity analysis is often applied to deterministic models. However, the models for the dynamic problem is a stochastic one due to the simulations of the random processes. Thus, a setting using a joint meta-model; one for the mean response and other for the dispersion of the response is developed. The joint model is developed within the framework of Generalized Linear Models (GLM). An enhancement of the GLM procedure is suggested and tested; this enhancement incorporates Moving Least Squares (MLS) approximation algorithms in the fitting of the mean component of the joint model. The sensitivity analysis is then performed on the joint-model developed for the dynamic responses caused by BVI.
DISCRETE CRACK MODEL OF BORCZ FOR CALCULATING THE DEFLECTIONS OF BENDING REINFORCED CONCRETE BEAM
(2012)
In the design of the reinforced concrete beams loaded by the bending moment, it is assumed that the structure can be used at a level of load, that there are local discontinuities - cracks. Designing the element demands checking two limit states of construction, load capacity and usability. Limit states usability include also the deflection of the element. Deflections in the reinforced concrete beams with cracks are based on actual rigidity of the element. After cracking there is a local change in rigidity of the beam. The rigidity is variable in the element’s length and due to the heterogeneous structure of concrete, it is not possible to clearly describe those changes. Most standards of testing methods tend to simplify the calculations and take the average value of the beam’s rigidity on its entire length. The rigidity depends on the level of the maximal load of the beam. Experimental researches verify the value by inserting the coefficients into the formulas used in the theory of elasticity. The researches describe the changes in rigidity in the beam’s length more precisely. The authors take into consideration the change of rigidity, depending on the level of maximum load (continuum models), or localize the changes in rigidity in the area of the cracks (discrete models). This paper presents one of the discrete models. It is distinguished by the fact that the left side of the differential equation, that depends on the rigidity, is constant, and all effects associated with the scratches are taken as the external load and placed on the right side of the equation. This allows to generalize the description. The paper presents a particular integral of the differential equation, which allow analyzing the displacement and vibration for different rigidity of the silo’s walls, the flow rate and type of the flowing material.
Im Rahmen dieser Arbeit wurde die Entscheidungsfindung im Herstellungsprozess von Brückenkappen untersucht. Es stellte sich heraus, dass die Fuzzy-Methode ein geeignetes Werkzeug sein könnte, die Teilprozesse auf die Möglichkeit ihrer Parallelisierung hin zu untersuchen. Um diese Theorie zu testen, wurde auf den Grundlagen von Arbeiten der Professur Baubetrieb und Bauverfahren der Prozess näher analysiert und unterstützend durch eigene Recherchen ein UML-Diagramm erstellt, welches als Aktivitätsdiagramm ausgebildet wurde. Aufbauend auf diesem Ablauf und den gewonnenen Kenntnissen zur Herstellung einer Brückenkappe, konnten die einzelnen Prozesse zu Teilprozessen, sogenannten Bausteinen, zusammengefasst werden. Diese Bausteine sind entstanden, um die Simulation möglich zu machen, indem der Ablauf weniger komplex wird und nur die Prozesse zu beurteilen sind, die beeinflusst bzw. in ihrer Reihenfolge bis zu einem gewissen Grad variabel sind. Eine erleichterte Interaktion mit den Bausteinen und deren Überführung in ein Simulationsprogramm wurde über Templates realisiert. So besitzt jeder Baustein eine einheitliche Struktur. Unter anderem beinhalten die Bausteine die jeweiligen Ressourcen und Parameter, sowie die Abhängigkeiten der Prozesse untereinander und die zugehörige Priorität. Zur Entscheidungsfindung wurde die Fuzzylogik herangezogen und die Problemstellung der Parallelisierung zum Ziel gesetzt. Die Realisierung wurde über einen Entscheidungsbaum und das daraus resultierende Regelwerk erreicht. Somit ließen sich, ausgehend von einem festgelegten Prozess und durch die Fuzzifizierung der Eingangsparameter Priorität, Prozessdauer und Verfügbarkeit der Ressourcen und Arbeitskräfte, verschiedene Pfade identifizieren, allerdings nur in Verbindung mit den vorher analysierten Abhängigkeiten. Für jeden der Eingangsparameter wurden so Fuzzy-Sets erstellt. Über den Entscheidungsbaum, welcher mit den linguistischen Variablen versehen wurde, konnte über sogenannte "und" - Verknüpfungen das Regelwerk aufgestellt werden. Das gekürzte Regelwerk in dieser Arbeit beinhaltet grundsätzlich nur die Regeln, die auch zu einer wirklichen Entscheidung führen. Daraus folgt, dass es möglich ist mittels der Fuzzy-Methode eine Entscheidung darüber zu fällen, ob zwei Prozesse zu parallelisieren sind oder nicht und aufgetretene Verzögerungen wieder eingeholt werden können.
Eine der jüngsten Entwicklungen in der Games Branche sind sogenannte Social Games. Hierbei handelt es sich um digitale Spiele, die innerhalb von sozialen Netzwerken, wie z.B. Facebook und Myspace, gespielt werden.
Studien zeigen, dass kommerzielle digitale Spiele mehr als nur ein Zeitvertreib sind. Sie fördern sowohl kognitive, als auch affektive
und psychomotorische Kompetenzen. Aus diesem Grund werden seit Jahrzehnten digitale Spiele in der Pädagogik eingesetzt, um ihre Motivationskraft zu nutzen, um Lerneffekte zu erzielen.
Ziel dieser Arbeit ist es Spielmechaniken für ein bauphysikalisches Social Game zu entwickeln. Ausgehend von der Identifikation von Spielmechaniken, basierend auf einer Analyse der Funktionsweisen existierender populärer Social Games, und einem grundlegenden pädagogischen Verständnis bezüglich Digital Game Based Learning (DGBL), werden Spielmechaniken entwickelt, mit deren Hilfe bauphysikalische Fachkompetenzen vermittelt werden können.
Entwurf eines Spieler-Modells für eine erweiterbare Spielplattform zur Ausbildung in der Bauphysik
(2012)
Im Projekt Intelligentes Lernen beschäftigen sich die Professuren Content Management und Web-Technologien, Systeme der Virtuellen Realität und Bauphysik der Bauhaus- Universität Weimar mit der Entwicklung innovativer Informationstechnologien für eLearning- Umgebungen. In den Teilbereichen Retrieval, Extraktion und Visualisierung großer Dokumentkollektionen, sowie simulations- und planbasierter Wissensvermittlung werden Algorithmen und Werkzeuge erforscht, um eLearning-Systeme leistungsfähiger zu machen und um somit den Lernerfolg zu optimieren.
Ziel des Projekts, auf dem Gebiet des simulationsbasierten Wissenstransfers, ist die Entwicklung eines Multiplayer Online Games (MOG) zur Ausbildungsunterstützung in der Bauphysik.
Im Rahmen der vorliegenden Bachelorarbeit wird für diese digitale Lernsoftware ein Spieler- Modell zur Verwaltung der spielerspezifischen Daten entworfen und in das bestehende Framework integriert. Der Schwerpunkt der Arbeit liegt in der Organisation der erlernten Fähigkeiten des Spielers und in der an den Wissensstand angepassten Auswahl geeigneter Spielaufgaben. Für die Anwendung im eLearning-Bereich ist die Erweiterbarkeit des Modells um neue Lernkomplexe eine wesentliche Anforderung.
In vorliegender Studie werden die Wohnstandortpräferenzen der Sinus-Milieugruppen in Dresden über eine standardisierte Befragung (n=318) untersucht. Es wird unterschieden zwischen handlungsleitenden Wohnstandortpräferenzen, die durch Anhaltspunkte auf der Handlungsebene stärker in Betracht gezogen werden sollten, und Wohnstandortpräferenzen, welche eher orientierenden Charakter haben. Die Wohnstandortpräferenzen werden untersucht anhand der Kategorien Ausstattung/Zustand der Wohnung/des näheren Wohnumfeldes, Versorgungsstruktur, soziales Umfeld, Baustrukturtyp, Ortsgebundenheit sowie des Aspektes des Images eines Stadtviertels. Um die Befragten den Sinus-Milieugruppen zuordnen zu können, wird ein Lebensweltsegment-Modell entwickelt, welches den Anspruch hat, die Sinus-Milieugruppen in der Tendenz abzubilden. Die Studie kommt zu dem Ergebnis, dass die Angehörigen der verschiedenen Lebensweltsegmente in jeder Kategorie - wenn auch z.T. auf geringerem Niveau - signifikante Unterschiede in der Bewertung einzelner Wohnstandortpräferenzen aufweisen.
Different types of data provide different type of information. The present research analyzes the error on prediction obtained under different data type availability for calibration. The contribution of different measurement types to model calibration and prognosis are evaluated. A coupled 2D hydro-mechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are identified by scaled sensitivities. Then, Particle Swarm Optimization is applied to determine the optimal parameter values and finally, the error in prognosis is determined. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain the actual prediction errors. The analyses presented here were performed calibrating the hydro-mechanical model to 31 data sets of 100 observations of varying data types. The prognosis results improve when using diversified information for calibration. However, when using several types of information, the number of observations has to be increased to be able to cover a representative part of the model domain. For an analysis with constant number of observations, a compromise between data type availability and domain coverage proves to be the best solution. Which type of calibration information contributes to the best prognoses could not be determined in advance. The error in model prognosis does not depend on the error in calibration, but on the parameter error, which unfortunately cannot be determined in inverse problems since we do not know its real value. The best prognoses were obtained independent of calibration fit. However, excellent calibration fits led to an increase in prognosis error variation. In the case of excellent fits; parameters' values came near the limits of reasonable physical values more often. To improve the prognoses reliability, the expected value of the parameters should be considered as prior information on the optimization algorithm.
The aim of this study is to show an application of model robustness measures for soilstructure interaction (henceforth written as SSI) models. Model robustness defines a measure for the ability of a model to provide useful model answers for input parameters which typically have a wide range in geotechnical engineering. The calculation of SSI is a major problem in geotechnical engineering. Several different models exist for the estimation of SSI. These can be separated into analytical, semi-analytical and numerical methods. This paper focuses on the numerical models of SSI specific macro-element type models and more advanced finite element method models using contact description as continuum or interface elements. A brief description of the models used is given in the paper. Following this description, the applied SSI problem is introduced. The observed event is a static loaded shallow foundation with an inclined load. The different partial models to consider the SSI effects are assessed using different robustness measures during numerical application. The paper shows the investigation of the capability to use these measures for the assessment of the model quality of SSI partial models. A variance based robustness and a mathematical robustness approaches are applied. These different robustness measures are used in a framework which allows also the investigation of computational time consuming models. Finally the result shows that the concept of using robustness approaches combined with other model–quality indicators (e.g. model sensitivity or model reliability) can lead to unique model–quality assessment for SSI models.
Gaze based human-computer-interaction has been a research topic for over a quarter century. Since then, the main scenario for gaze interaction has been helping handicapped people to communicate an interact with their environment. With the rapid development of mobile and wearable display technologies, a new application field for gaze interaction has appeared, opening new research questions.
This thesis investigates the feasibility of mobile gaze based interaction, studying deeply the use of pie menus as a generic and robust widget for gaze interaction as well as visual and perceptual issues on head mounted (wearable) optical see-through displays.
It reviews conventional gaze-based selection methods and investigates in detail the use of pie menus for gaze control. It studies and discusses layout issues, selection methods and applications. Results show that pie menus can allocate up to six items in width and multiple depth layers, allowing a fast and accurate navigation through hierarchical levels by using or combining multiple selection methods. Based on these results, several text entry methods based on pie menus are proposed. Character-by-character text entry, text entry with bigrams and with text entry with bigrams derived by word prediction, as well as possible selection methods, are examined in a longitudinal study. Data showed large advantages of the bigram entry methods over single character text entry in speed and accuracy. Participants preferred the novel selection method based on saccades (selecting by borders) over the conventional and well established dwell time method.
On the one hand, pie menus showed to be a feasible and robust widget, which may enable the efficient use of mobile eye tracking systems that may not be accurate enough for controlling elements on conventional interface. On the other hand, visual perception on mobile displays technologies need to be examined in order to deduce if the mentioned results can be transported to mobile devices.
Optical see-through devices enable observers to see additional information embedded in real environments. There is already some evidence of increasing visual load on the respective systems. We investigated visual performance on participants with a visual search tasks and dual tasks presenting visual stimuli on the optical see-through device, only on a computer screen, and simultaneously on both devices. Results showed that switching between the presentation devices (i.e. perceiving information simultaneously from both devices) produced costs in visual performance. The implications of these costs and of further perceptual and technical factors for mobile gaze-based interaction are discussed and solutions are proposed.
Helsinki Central
(2012)
Als zentraler Ort und Eingangstor in die finnische Hauptstadt bietet der Bereich um den Bahnhof, in dem sich das Baufeld befindet zu wenig räumliche Qualitäten und bildet gleichzeitig eine Barriere zwischen dem historischen Stadtkern und dem politischen und kulturellem Zentrum der Stadt.
Der historische Bahnhof aus der Epoche des Jugendstils ist momentan eingeschlossen von einer hochfrequentierten Straße im Süden und den flankierenden Stationen des Busbahnhofs an der Ost- und Westseite.
Die fußläufigen Verbindungen in die Altstadt sind gestört und das Regierungsviertel mit
dem Reichstagsgebäude werden links liegen gelassen. Eine Orientierung als Neuankömmling ist schwer möglich.
Darüber hinaus kommt etwa die Hälfte der Züge, vor allem die Regionalzüge nicht in der Bahnhofshalle des Kopfbahnhofes an, weil die Begrenzung durch die
Seitenflügel nur eine Erweiterung des Bahnhofs nach Norden hin zuließ.
Entstanden ist ein Entwurf der versucht, dem gesamten Bereich um den Bahnhof ein neues Gesicht zu geben und eine Verbesserung auf unterschiedlichen Ebenen zu erreichen. Er bündelt zum einen die verschiedenen Verkehrsströme und stellt eine bisher unterbrochene Querverbindung zwischen den benachbarten Stadtvierteln entlang des Bahnhofsareals her. Zum anderen trägt er dem Erfordernis nach einem städtebaulichen Gegenüber für das
Regierungsgebäude Rechnung, welches damit in den Verbund der kulturellen Einrichtungen auf dem Töölönlahti Gelände aufgenommen wird. Darüber hinaus belebt er eine Besonderheit von Helsinki. Zu Beginn des 20. Jahrhunderts bestand die Notwendigkeit den Hafen an das Schienennetz anzubinden. Da der Stadtkern bereits sehr dicht bebaut war, wurde ein Eisenbahnring entlang der Küste, einmal um das Stadtzentrum herum gebaut. Seitdem die Verbindung stillgelegt wurde liegt dieser Ring brach, was nun die große Chance bietet, eine kreuzungsfreien Rad- und Fußweg zu etablieren, der durch den Entwurf eines Mobilityhubs geschlossen würde.
In der vorliegenden Broschüre werden die städtebaulichen Rahmenbedingungen, die Analyse der gegenwärtigen Situation und der eigentliche Entwurfsprozess, der zu dieser Lösung führte dokumentiert.
Modern digital material approaches for the visualization and simulation of heterogeneous materials allow to investigate the behavior of complex multiphase materials with their physical nonlinear material response at various scales. However, these computational techniques require extensive hardware resources with respect to computing power and main memory to solve numerically large-scale discretized models in 3D. Due to a very high number of degrees of freedom, which may rapidly be increased to the two-digit million range, the limited hardware ressources are to be utilized in a most efficient way to enable an execution of the numerical algorithms in minimal computation time. Hence, in the field of computational mechanics, various methods and algorithms can lead to an optimized runtime behavior of nonlinear simulation models, where several approaches are proposed and investigated in this thesis.
Today, the numerical simulation of damage effects in heterogeneous materials is performed by the adaption of multiscale methods. A consistent modeling in the three-dimensional space with an appropriate discretization resolution on each scale (based on a hierarchical or concurrent multiscale model), however, still contains computational challenges in respect to the convergence behavior, the scale transition or the solver performance of the weak coupled problems. The computational efficiency and the distribution among available hardware resources (often based on a parallel hardware architecture) can significantly be improved. In the past years, high-performance computing (HPC) and graphics processing unit (GPU) based computation techniques were established for the investigationof scientific objectives. Their application results in the modification of existing and the development of new computational methods for the numerical implementation, which enables to take advantage of massively clustered computer hardware resources. In the field of numerical simulation in material science, e.g. within the investigation of damage effects in multiphase composites, the suitability of such models is often restricted by the number of degrees of freedom (d.o.f.s) in the three-dimensional spatial discretization. This proves to be difficult for the type of implementation method used for the nonlinear simulation procedure and, simultaneously has a great influence on memory demand and computational time.
In this thesis, a hybrid discretization technique has been developed for the three-dimensional discretization of a three-phase material, which is respecting the numerical efficiency of nonlinear (damage) simulations of these materials. The increase of the computational efficiency is enabled by the improved scalability of the numerical algorithms. Consequently, substructuring methods for partitioning the hybrid mesh were implemented, tested and adapted to the HPC computing framework using several hundred CPU (central processing units) nodes for building the finite element assembly. A memory-efficient iterative and parallelized equation solver combined with a special preconditioning technique for solving the underlying equation system was modified and adapted to enable combined CPU and GPU based computations.
Hence, it is recommended by the author to apply the substructuring method for hybrid meshes, which respects different material phases and their mechanical behavior and which enables to split the structure in elastic and inelastic parts. However, the consideration of the nonlinear material behavior, specified for the corresponding phase, is limited to the inelastic domains only, and by that causes a decreased computing time for the nonlinear procedure. Due to the high numerical effort for such simulations, an alternative approach for the nonlinear finite element analysis, based on the sequential linear analysis, was implemented in respect to scalable HPC. The incremental-iterative procedure in finite element analysis (FEA) during the nonlinear step was then replaced by a sequence of linear FE analysis when damage in critical regions occured, known in literature as saw-tooth approach. As a result, qualitative (smeared) crack initiation in 3D multiphase specimens has efficiently been simulated.
The present research analyses the error on prediction obtained under different data availability scenarios to determine which measurements contribute to an improvement of model prognosis and which not. A fully coupled 2D hydromechanical model of a water retaining dam is taken as an example. Here, the mean effective stress in the porous skeleton is reduced due to an increase in pore water pressure under drawdown conditions. Relevant model parameters are ranked by scaled sensitivities, Particle Swarm Optimization is applied to determine the optimal parameter values and model validation is performed to determine the magnitude of error forecast. We compare the predictions of the optimized models with results from a forward run of the reference model to obtain actual prediction errors.
The analyses presented here were performed to 31 data sets of 100 observations of varying data types. Calibrating with multiple information types instead of only one sort, brings better calibration results and improvement in model prognosis. However, when using several types of information the number of observations have to be increased to be able to cover a representative part of the model domain; otherwise a compromise between data availability and domain
coverage prove best. Which type of information for calibration contributes to the best prognoses, could not be determined in advance. For the error in model prognosis does not depends on the error in calibration, but on the parameter error, which unfortunately can not be determined in reality since we do not know its real value. Excellent calibration fits with parameters’ values near the limits of reasonable physical values, provided the highest prognosis errors. While models which included excess pore pressure values for calibration provided the best prognosis, independent of the calibration fit.
The 19th International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering will be held at the Bauhaus University Weimar from 4th till 6th July 2012. Architects, computer scientists, mathematicians, and engineers from all over the world will meet in Weimar for an interdisciplinary exchange of experiences, to report on their results in research, development and practice and to discuss. The conference covers a broad range of research areas: numerical analysis, function theoretic methods, partial differential equations, continuum mechanics, engineering applications, coupled problems, computer sciences, and related topics. Several plenary lectures in aforementioned areas will take place during the conference.
We invite architects, engineers, designers, computer scientists, mathematicians, planners, project managers, and software developers from business, science and research to participate in the conference!
Thin-walled cylindrical composite shell structures are often applied in aerospace for lighter and cheaper launcher transport system. These structures exhibit sensitivity to geometrical imperfection and are prone to buckling under axial compression. Today the design is based on NASA guidelines from the 1960’s [1] using a conservative lower bound curve embodying many experimental results of that time. It is well known that the advantages and different characteristics of composites as well as the evolution of manufacturing standards are not considered apporopriately in this outdated approach. The DESICOS project was initiated to provide new design guidelines regarding all the advantages of composites and allow further weight reduction of space structures by guaranteeing a more precise and robust design.
Therefore it is necessary among other things to understand how a cutout with different dimensions affects the buckling load of a thin-walled cylindrical shell structure in combination with initial geometric imperfections. This work is intended to identify a ratio between the cutout characteristic dimension (in this case the cutout diameter) and the structure characteristic dimension (in this case the cylinder radius) that can be used to tell if the buckling structure is dominated by initial imperfections or is dominated by the cutout.
Die Vorstellung des Gesamtwerkes der halleschen Architekten Julius Kallmeyer und Wilhelm Facilides, die sich Anfang der 1920er Jahre zu einer Zusammenarbeit entschlossen und eine Vielzahl interessanter Gebäude für die Saalestadt schufen, ist in der Fokussierung der Gesamtthematik der Lebens- und Werksdarstellung das Grundanliegen dieser Ausarbeitung. Dieses bisher nicht in Angriff genommene architekturgeschichtliche Anliegen beschäftigt sich mit den Ergebnissen der Bürogeschichte einer- und der Lebensgeschichte der Persönlichkeiten andererseits. Bis heute gelten die klassisch modernen Architekturen Kallmeyers & Facilides ́, gerade für den gehobenen Wohnhausbau in Halle an der Saale, als herausragende Leistungen.
Architektonisches Entwerfen ist ein kreativer Prozess, der eine Lösung hervorbringt, die in ihrer Form und ihrer Funktionalität so noch nicht bestand. Resultat eines architektonischen Entwurfes ist ein Original, dessen Entstehen eine schöpferische Komponente erfordert. Dieser kreative Prozess ist nicht systematisierbar und kann auch nicht als Methode wiederholbar gemacht werden. Im Rahmen der architektonischen Lehre ist die Vermittlung von Methoden zur Entwurfsfindung jedoch ein wesentlicher Aspekt. Der hier vorgestellte Entwurf möchte zeigen, dass der Auffassung, allein intuitive Methoden als Entwurfsgrundlage zu nutzen, die Auffassung entgegen steht, eine reglementierte Methode zur Entwurfs- und Formfindung anzuwenden.
Eine solche reglementierte Methode wird hierbei als Entwurfsgrammatik bezeichnet.
In den 1950er Jahren entstehen zwei revolutionäre Werke des Komponisten und Architekten Iannis Xenakis: die Komposition Metastaseis und der Philips-Pavillon für die Weltausstellung in Brüssel. Basierend auf diesen Arbeiten wird eine Methode vorgestellt, welche musikalische Parameter in architektonischen Parameter transformiert.
Diese Methode bildet die Grundlage für ein exaktes räumliches Transformation-Modell, welches aus mathematischen Funktionen abgeleitet ist. Dabei weißt das Transformations-Modell eine starke Ähnlichkeit mit der Architektur des Pavillons auf.
Die im vorliegenden Buch dokumentierten Untersuchungen befassen sich mit der Entwicklung von Methoden zur algorithmischen Lösung von Layoutaufgaben im architektonischen Kontext. Layout bezeichnet hier die gestalterisch und funktional sinnvolle Anordnung räumlicher Elemente, z.B. von Parzellen, Gebäuden, Räumen auf bestimmten Maßstabsebenen. Die vorliegenden Untersuchungen sind im Rahmen eines von der Deutschen Forschungsgemeinschaft geförderten Forschungsprojekts entstanden.
Lesen - Schreiben - Apparate
(2012)
We study the Weinstein equation u on the upper half space R3+. The Weinstein equation is connected to the axially symmetric potentials. We compute solutions of the Weinstein equation depending on the hyperbolic distance and x2. These results imply the explicit mean value properties. We also compute the fundamental solution. The main tools are the hyperbolic metric and its invariance properties.
Metakaolin made from kaolin is used around the world but rarely in Vietnam where abundant deposits of kaolin is found. The first studies of producing metakaolin were conducted with high quality Vietnamese kaolins. The results showed the potential to produce metakaolin, and its effect has on strength development of mortars and concretes. However, utilisation of a low quality kaolin for producing Vietnamese metakaolin has not been studied so far.
The objectives of this study were to produce a good quality metakaolin made from low quality Vietnamese kaolin and to facilitate the utilisation of Vietnamese metakaolin in composite cements.
In order to reach such goals, the optimal thermal conversion of Vietnamese kaolin into metakaolin was carried out by many investigations, and as such the optimal conversion is found using the analysis results of DSC/TGA, XRD and CSI. During the calcination in a range of 500 – 800 oC lasting for 1 – 5 hours, the characterisation of calcinated kaolin was also monitored for mass loss, BET surface, PSD, density as well as the presence of the residual water. It is found to have a well correlation between residual water and BET surface.
The pozzolanic activity of metakaolin was tested by various methods regarding to the saturated lime method, mCh and TGA-CaO method. The results of the study showed which method is the most suitable one to characterise the real activity of metakaolin and can reach the greatest agreement with concrete performance. Furthermore, the pozzolanic activity results tested using methods were also analysed and compared to each other with respect to the BET surface.
The properties of Vietnam metakaolin was established using investigations on water demand, setting time, spread-flowability, and strength. It is concluded that depending on the intended use of composite cement and weather conditions of cure, each Vietnamese metakaolin can be used appropriately to produce (1) a composite cement with a low water demand (2) a high strength of composite cement (3) a composite cement that aims to reduce CO2 emissions and to improve economics of cement products (4) a high performance mortar.
The durability of metakaolin mortar was tested to find the needed metakaolin content against ASR, sulfat and sulfuric acid attacks successfully.