Refine
Document Type
- Conference Proceeding (132)
- Doctoral Thesis (15)
- Article (7)
- Master's Thesis (7)
- Report (4)
- Diploma Thesis (3)
- Preprint (3)
- Book (1)
- Part of a Book (1)
Institute
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (93)
- Institut für Strukturmechanik (ISM) (16)
- Professur Baubetrieb und Bauverfahren (10)
- Professur Angewandte Mathematik (6)
- Institut für Europäische Urbanistik (5)
- Junior-Professur Augmented Reality (5)
- Professur Stahlbau (5)
- Institut für Konstruktiven Ingenieurbau (IKI) (4)
- Professur Informatik in der Architektur (4)
- Professur Computergestütztes kooperatives Arbeiten (3)
Keywords
Year of publication
- 2006 (173) (remove)
The contribution presents a model that is able to simulate construction duration and cost for a building project. This model predicts set of expected project costs and duration schedule depending on input parameters such as production speed, scope of work, time schedule, bonding conditions and maximum and minimum deviations from scope of work and production speed. The simulation model is able to calculate, on the basis of input level of probability, the adequate construction cost and time duration of a project. The reciprocal view attends to finding out the adequate level of probability for construction cost and activity durations. Among interpretive outputs of the application software belongs the compilation of a presumed dynamic progress chart. This progress chart represents the expected scenario of development of a building project with the mapping of potential time dislocations for particular activities. The calculation of a presumed dynamic progress chart is based on an algorithm, which calculates mean values as a partial result of the simulated building project. Construction cost and time models are, in many ways, useful tools in project management. Clients are able to make proper decisions about the time and cost schedules of their investments. Consequently, building contractors are able to schedule predicted project cost and duration before any decision is finalized.
Objects for civil engineering applications can be identified with their reference in memory, their alpha-numeric name or their geometric location. Particularly in graphic user interfaces, it is common to identify objects geometrically by selection with the mouse. As the number of geometric objects in a graphic user interface grows, it becomes increasingly more important to treat the basic operations add, search and remove for geometric objects with great efficiency. Guttmann has proposed the Region-Tree (R-tree) for geometric identification in an environment which uses pages on disc as data structure. Minimal bounding rectangles are used to structure the data in such a way that neighborhood relations can be described effectively. The literature shows that the parameters which influence the efficiency of the R-trees have been studied extensively, but without conclusive results. The goal of the research which is reported in this paper is to determine reliably the parameters which significantly influence the efficiency of R-trees for geometric identification in technical drawings. In order to make this investigation conclusive, it must be performed with the best available software technology. Therefore an object-oriented software for the method is developed. This implementation is tested with technical drawings containing many thousands of geometric objects. These drawings are created automatically by a stochastic generator which is incorporated into a test bed consisting of an editor and a visualisor. This test bed is used to obtain statistics for the main factors which affect the efficiency of R-trees. The investigation shows that the following main factors which affect the efficiency can be identified reliably : number of geometric objects on the drawing the minimum und maximum number of children of a node of the tree the maximum width and height of the minimal bounding rectangles of the geometric objects relative to the size of the drawing.
Projector-Based Augmentation
(2006)
Projector-based augmentation approaches hold the potential of combining the advantages of well-establishes spatial virtual reality and spatial augmented reality. Immersive, semi-immersive and augmented visualizations can be realized in everyday environments – without the need for special projection screens and dedicated display configurations. Limitations of mobile devices, such as low resolution and small field of view, focus constrains, and ergonomic issues can be overcome in many cases by the utilization of projection technology. Thus, applications that do not require mobility can benefit from efficient spatial augmentations. Examples range from edutainment in museums (such as storytelling projections onto natural stone walls in historical buildings) to architectural visualizations (such as augmentations of complex illumination simulations or modified surface materials in real building structures). This chapter describes projector-camera methods and multi-projector techniques that aim at correcting geometric aberrations, compensating local and global radiometric effects, and improving focus properties of images projected onto everyday surfaces.
Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computergenerated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination – opening new possibilities for TV studios.
Heutige Methoden zur Soll-Spezifikation von Bauleistungen (Kostenermittlung und zeitliche Ablaufplanung) gehen von einer abstrahierten und vereinfachten Betrachtung der Zusammenhänge bei Bauprojekten aus. Leistungsverzeichnisse, Kostenermittlungen und Bauzeitpläne orientieren sich nur indirekt an der Geometrie des Bauwerks und der Baustelle. Die dabei verwendeten Medien wie Papier, 2D-Dateien, digitale Leistungsbeschreibungen oder 3D-Darstellungen lassen die Suche nach Informationen auf der Baustelle zu einem zeitaufwändigen und in Anbetracht existierender Medientechnologien ineffizienten Prozess werden. Interaktive virtuelle Umgebungen erlauben die Auflösung starrer Zusammenhänge durch interaktive Eingriffe des Anwenders und visualisieren komplexe bauproduktionstechnische Vorgänge. Das Konzept der visuellen interaktiven Simulation der Bauproduktion sieht vor, die Soll-Spezifikation anhand eines interaktiven 3D-Modells zu entwickeln, um räumliche Veränderungen und parallele Prozesse auf der virtuellen Baustelle im Rahmen der Entscheidungsfindung zum Bauablauf besser berücksichtigen zu können. Verlangt man einen hohen Grad an Interaktivität mit dem 3D-Modell, dann bieten sich Computerspieltechnologien sehr gut zu Verifikationszwecken an. Die visuelle interaktive Simulation der Bauproduktion ist damit als eine 3D-modellbasierte Methode der Prozessmodellierung zu verstehen, die Entscheidungen als Input benötigt und die Kostenermittlung sowie die zeitliche Ablaufplanung als Output liefert.
The contribution focuses on the development of a basic computational scheme that provides a suitable calculation environment for the coupling of analytical near-field solutions with numerical standard procedures in the far-field of the singularity. The proposed calculation scheme uses classical methods of complex function theory, which can be generalized to 3-dimensional problems by using the framework of hypercomplex analysis. The adapted approach is mainly based on the factorization of the Laplace operator EMBED Equation.3 by the Cauchy-Riemann operator EMBED Equation.3 , where exact solutions of the respective differential equation are constructed by using an orthonormal basis of holomorphic and anti-holomorphic functions.
In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.
The one-dimensional continuous wavelet transform is a successful tool for signal and image analysis, with applications in physics and engineering. Clifford analysis offers an appropriate framework for taking wavelets to higher dimension. In the usual orthogonal case Clifford analysis focusses on monogenic functions, i.e. null solutions of the rotation invariant vector valued Dirac operator ∂, defined in terms of an orthogonal basis for the quadratic space Rm underlying the construction of the Clifford algebra R0,m. An intrinsic feature of this function theory is that it encompasses all dimensions at once, as opposed to a tensorial approach with products of one-dimensional phenomena. This has allowed for a very specific construction of higher dimensional wavelets and the development of the corresponding theory, based on generalizations of classical orthogonal polynomials on the real line, such as the radial Clifford-Hermite polynomials introduced by Sommen. In this paper, we pass to the Hermitian Clifford setting, i.e. we let the same set of generators produce the complex Clifford algebra C2n (with even dimension), which we equip with a Hermitian conjugation and a Hermitian inner product. Hermitian Clifford analysis then focusses on the null solutions of two mutually conjugate Hermitian Dirac operators which are invariant under the action of the unitary group. In this setting we construct new Clifford-Hermite polynomials, starting in a natural way from a Rodrigues formula which now involves both Dirac operators mentioned. Due to the specific features of the Hermitian setting, four different types of polynomials are obtained, two types of even degree and two types of odd degree. These polynomials are used to introduce a new continuous wavelet transform, after thorough investigation of all necessary properties of the involved polynomials, the mother wavelet and the associated family of wavelet kernels.
Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.
Die Arbeit beschäftigt sich mit der Entstehung eines ökonomischen Kraftmaßes am Beispiel der Maschine von Marly im Zeitraum von ca. 1680 bis 1840. Die Leitthese der Dissertation besagt, dass vom 17. zum 19. Jahrhundert eine grundlegende Transformation des Maschinenbegriffs stattfand, die als Übergang vom Substanzbegriff zum Funktionsbegriff der Maschine bezeichnet werden kann. Im 17. Jahrhundert wurden mechanische Apparate als in sich geschlossene, selbstbezügliche Strukturen aufgefasst. Als anschaulich erfahrbare Objekte konnten sie als Bildgeber dienen, die mittels des Verfahrens der Strukturanalogie Erklärungsmuster für verschiedenste Phänomene (Körper, Staat, Welt) boten. Demzufolge galten sie als selbstevident: sie waren erklärend und mussten selbst nicht erklärt werden. Ihr etwaiger Zweck und ihre Einbettung in gesellschaftliche Zusammenhänge spielten dabei keine Rolle. Wie anhand der Beschreibungen und Darstellungen aus jener Zeit nachgewiesen werden kann, wurde die Maschine von Marly innerhalb dieser Episteme als architektonisches Objekt wahrgenommen, bei dem vor allem das Zusammenspiel der einzelnen Elemente Aufmerksamkeit erregte. Wie andere Maschinen auch stand sie unter dem Primat der Sichtbarkeit. Man war davon überzeugt, dass die Eigenschaften einer Maschine von der strukturellen Anordnung ihrer Bauteile abhingen und glaubte, ihre Qualität an ihrer Gestalt ablesen zu können. Ab der Mitte des 18. Jahrhunderts tauchte die Maschine von Marly in den Schriften physiokratischer Autoren auf. Zuerst diente sie dort als Beispiel für die Verschwendungssucht Louis’ XIV. und als Metapher für eine schlechte Einrichtung des Staates. Doch zunehmend begann man, sie auch in ihrer Faktizität als technisch-politisches Objekt zu begreifen. Man kritisierte ihre aktuelle Nutzung und schlug andere Möglichkeiten ihrer Verwendung vor, etwa die Bewässerung von Feldern oder die städtische Trinkwasserversorgung. Damit war die Maschine von Marly nicht länger ein Modell für die Einrichtung des Staates, das nur am Maßstab der immanenten Perfektion beurteilt werden konnte. Vielmehr war sie nun ein Instrument der Regierung, das sich als Teil eines staatlich verfassten Gemeinwesens verantworten musste. Als solches wurde sie auch zu einem bevorzugten Gegenstand aufklärerischer Reformprojekte. Das zeigt sich besonders deutlich am Wettbewerb, den die Pariser Akademie der Wissenschaften 1784-1786 organisiert hatte und der Vorschläge zur Verbesserung oder Ersetzung der Maschine von Marly zum Gegenstand hatte. Die Auswertung der mehr als 100 eingereichten Projekte und Memoranden ermöglicht einen einzigartigen Blick auf die Hoffnungen und Wünsche, die Ende des 18. Jahrhunderts an die Erfindung technischer Geräte gekoppelt waren. Um 1800 kann man die allmähliche Entstehung eines Funktionsbegriffs der Maschine bemerken. Lazare Carnots Essai sur les machines en général, der eine in der Sprache der Algebra artikulierte Definition der Maschine beinhaltete, trug maßgeblich dazu bei, die Anschaulichkeit zugunsten eines operativen Symbolismus zu delegitimieren. Erst dadurch war die Formulierung eines Effizienzkalküls möglich. Ergänzt wurde diese Formalisierung durch den Diskurs der Industrialisierung, in dem technische Apparate zunehmend als Produktionsmittel verstanden wurden. Die Maschine von Marly war ein wichtiger Schauplatz für die Entstehung eines ökonomischen Kraftmaßes. Nicht nur wurden dort Experimente mit verschiedenen Messinstrumenten (Dynamometern) durchgeführt, auch diente sie Joseph Montgolfier als Beispiel um zu beweisen, dass Kraft als Geldwert ausgedrückt werden könne. In den ersten Jahrzehnten des 19. Jahrhundert wurden Maschinen schließlich relational als Positionen innerhalb eines nationalen Produktionssystems definiert. Sie galten als Krafttransformatoren, bei denen ein bestimmter Input von ‚force motrice’ einen entsprechenden Output von ‚travail utile’ ergeben würde. Ihre vornehmlichste Aufgabe war die möglichst effiziente Ausnutzung der Kraftressourcen. Den vorläufigen Endpunkt erreichte die Entstehung des ökonomischen Kraftmaßes um 1830 mit der Formulierung des Begriffs der ‚mechanischen Arbeit’.
Für eine gesicherte Planung im Bestand, sind eine Fülle verschiedenster Informationen zu berücksichtigen, welche oft erst während des Planungs- oder Bauprozesses gewonnen werden. Voraussetzung hierfür bildet immer eine Bestandserfassung. Zwar existieren Computerprogramme zur Unterstützung der Bestandserfassung, allerdings handelt es sich hierbei ausschließlich um Insellösungen. Der Export der aufgenommenen Daten in ein Planungssystem bedingt Informationsverluste. Trotz der potentiellen Möglichkeit aktueller CAAD/BIM Systeme zur Verwaltung von Bestandsdaten, sind diese vorrangig für die Neubauplanung konzipiert. Die durchgängige Bearbeitung von Sanierungsprojekten von der Erfassung des Bestandes über die Entwurfs- und Genehmigungsplanung bis zur Ausführungsplanung innerhalb eines CAAD/BIM Systems wird derzeit nicht adäquat unterstützt. An der Professur Informatik in der Architektur (InfAR) der Fakultät Architektur der Bauhaus-Universität Weimar entstanden im Rahmen des DFG Sonderforschungsbereich 524 "Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken" in den letzten Jahren Konzepte und Prototypen zur fachlich orientierten Unterstützung der Planung im Bestand. Der Fokus lag dabei in der Erfassung aller planungsrelevanter Bestandsdaten und der Abbildung dieser in einem dynamischen Bauwerksmodell. Aufbauend auf diesen Forschungsarbeiten befasst sich der Artikel mit der kontextbezogenen Weiterverwendung und gezielten Bereitstellung von Bestandsdaten im Prozess des Planens im Bestand und der Integration von Konzepten der planungsrelevanten Bestandserfassung in marktübliche CAAD/BIM Systeme.
Am Beispiel eines 3-feldrigen Durchlaufträgers wird die Versagenswahrscheinlichkeit von wechselnd belasteten Stahlbetonbalken bezüglich des Grenzzustandes der Adaption (Einspielen, shakedown) untersucht. Die Adaptionsanalyse erfolgt unter Berücksichtigung der beanspruchungschabhängigen Degradation der Biegesteifigkeit infolge Rissbildung. Die damit verbundene mechanische Problemstellung kann auf die Adaptionsanalyse linear elastisch - ideal plastischer Balkentragwerke mit unbekannter aber begrenzter Biegesteifigkeit zurückgeführt werden. Die Versagenswahrscheinlichkeit wird unter Berücksichtigung stochastischer Tragwerks- und Belastungsgrößen berechnet. Tragwerkseigenschaften und ständige Lasten gelten als zeitunabhängige Zufallsgrößen. Zeitlich veränderliche Lasten werden als nutzungsdauerbezogene Extremwerte POISSONscher Rechteck-Pulsprozesse unter Berücksichtigung zeitlicher Überlagerungseffekte modelliert, so dass die Versagenswahrscheinlichkeit ebenfalls eine nutzungsdauerbezogene Größe ist. Die mechanischen Problemstellungen werden numerisch mit der mathematischen Optimierung gelöst. Die Versagenswahrscheinlichkeit wird auf statistischem Weg mit der Monte-Carlo-Methode geschätzt.
Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnhäusern in Stahlbauweise
(2006)
Modelle bilden die Grundlage der Planung. Sie repräsentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenhänge bezüglich der darin abgebildeten Aspekte. Diese Abhängigkeiten werden in der praktischen Planungsbearbeitung gegenwärtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen berücksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften führt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Ansprüchen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine über den Zweck der Bereitstellung ausgewählter Informationen zum Bauwerk und der Unterstützung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnhäusern in Stahlbauweise geführt.
This contribution will be freewheeling in the domain of signal, image and surface processing and touch briefly upon some topics that have been close to the heart of people in our research group. A lot of the research of the last 20 years in this domain that has been carried out world wide is dealing with multiresolution. Multiresolution allows to represent a function (in the broadest sense) at different levels of detail. This was not only applied in signals and images but also when solving all kinds of complex numerical problems. Since wavelets came into play in the 1980's, this idea was applied and generalized by many researchers. Therefore we use this as the central idea throughout this text. Wavelets, subdivision and hierarchical bases are the appropriate tools to obtain these multiresolution effects. We shall introduce some of the concepts in a rather informal way and show that the same concepts will work in one, two and three dimensions. The applications in the three cases are however quite different, and thus one wants to achieve very different goals when dealing with signals, images or surfaces. Because completeness in our treatment is impossible, we have chosen to describe two case studies after introducing some concepts in signal processing. These case studies are still the subject of current research. The first one attempts to solve a problem in image processing: how to approximate an edge in an image efficiently by subdivision. The method is based on normal offsets. The second case is the use of Powell-Sabin splines to give a smooth multiresolution representation of a surface. In this context we also illustrate the general method of construction of a spline wavelet basis using a lifting scheme.
In this paper we study the structure of the solutions to higher dimensional Dirac type equations generalizing the known λ-hyperholomorphic functions, where λ is a complex parameter. The structure of the solutions to the system of partial differential equations (D- λ) f=0 show a close connection with Bessel functions of first kind with complex argument. The more general system of partial differential equations that is considered in this paper combines Dirac and Euler operators and emphasizes the role of the Bessel functions. However, contrary to the simplest case, one gets now Bessel functions of any arbitrary complex order.
Design activity could be treated as state transition computationally. In stepwise processing, in-between form-states are not easily observed. However, in this research time-based concept is introduced and applied in order to bridge the gap. In architecture, folding is one method of form manipulation and architects also want to search for alternatives by this operation. Besides, folding operation has to be defined and parameterized before time factor is involved as a variable of folding. As a result, time-based transformation provides sequential form states and redirects design activity.
ON THE NAVIER-STOKES EQUATION WITH FREE CONVECTION IN STRIP DOMAINS AND 3D TRIANGULAR CHANNELS
(2006)
The Navier-Stokes equations and related ones can be treated very elegantly with the quaternionic operator calculus developed in a series of works by K. Guerlebeck, W. Sproeossig and others. This study will be extended in this paper. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one basically needs to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. With special variants of quaternionic holomorphic multiperiodic functions we obtain explicit formulas for three dimensional parallel plate channels, rectangular block domains and regular triangular channels. The explicit knowledge of the integral kernels makes it then possible to evaluate the operator equations in order to determine the solutions of the boundary value problem explicitly.
In classical complex function theory the geometric mapping property of conformality is closely linked with complex differentiability. In contrast to the planar case, in higher dimensions the set of conformal mappings is only the set of Möbius transformations. Unfortunately, the theory of generalized holomorphic functions (by historical reasons they are called monogenic functions) developed on the basis of Clifford algebras does not cover the set of Möbius transformations in higher dimensions, since Möbius transformations are not monogenic. But on the other side, monogenic functions are hypercomplex differentiable functions and the question arises if from this point of view they can still play a special role for other types of 3D-mappings, for instance, for quasi-conformal ones. On the occasion of the 16th IKM 3D-mapping methods based on the application of Bergman's reproducing kernel approach (BKM) have been discussed. Almost all authors working before that with BKM in the Clifford setting were only concerned with the general algebraic and functional analytic background which allows the explicit determination of the kernel in special situations. The main goal of the abovementioned contribution was the numerical experiment by using a Maple software specially developed for that purpose. Since BKM is only one of a great variety of concrete numerical methods developed for mapping problems, our goal is to present a complete different from BKM approach to 3D-mappings. In fact, it is an extension of ideas of L. V. Kantorovich to the 3-dimensional case by using reduced quaternions and some suitable series of powers of a small parameter. Whereas until now in the Clifford case of BKM the recovering of the mapping function itself and its relation to the monogenic kernel function is still an open problem, this approach avoids such difficulties and leads to an approximation by monogenic polynomials depending on that small parameter.
Wolken
(2006)
Designing a structure follows a pattern of creating a structural design concept, executing a finite element analysis and developing a design model. A project was undertaken to create computer support for executing these tasks within a collaborative environment. This study focuses on developing a software architecture that integrates the various structural design aspects into a seamless functional collaboratory that satisfies engineering practice requirements. The collaboratory is to support both homogeneous collaboration i.e. between users operating on the same model and heterogeneous collaboration i.e. between users operating on different model types. Collaboration can take place synchronously or asynchronously, and the information exchange is done either at the granularity of objects or at the granularity of models. The objective is to determine from practicing engineers which configurations they regard as best and what features are essential for working in a collaborative environment. Based on the suggestions of these engineers a specification of a collaboration configuration that satisfies engineering practice requirements will be developed.
Reasonably accurate cost estimation of the structural system is quite desirable at the early stages of the design process of a construction project. However, the numerous interactions among the many cost-variables make the prediction difficult. Artificial neural networks (ANN) and case-based reasoning (CBR) are reported to overcome this difficulty. This paper presents a comparison of CBR and ANN augmented by genetic algorithms (GA) conducted by using spreadsheet simulations. GA was used to determine the optimum weights for the ANN and CBR models. The cost data of twenty-nine actual cases of residential building projects were used as an example application. Two different sets of cases were randomly selected from the data set for training and testing purposes. Prediction rates of 84% in the GA/CBR study and 89% in the GA/ANN study were obtained. The advantages and disadvantages of the two approaches are discussed in the light of the experiments and the findings. It appears that GA/ANN is a more suitable model for this example of cost estimation where the prediction of numerical values is required and only a limited number of cases exist. The integration of GA into CBR and ANN in a spreadsheet format is likely to improve the prediction rates.
Der Begriff der Zuverlässigkeit spielt eine zentrale Rolle bei der Bewertung von Verkehrsnetzen. Aus der Sicht der Nutzer des öffentlichen Personennahverkehrs (ÖPNV) ist eines der wichtigsten Kriterien zur Beurteilung der Qualität des Liniennetzes, ob es möglich ist, mit einer großen Sicherheit das Reiseziel in einer vorgegebenen Zeit zu erreichen. Im Vortrag soll dieser Zuverlässigkeitsbegriff mathematisch gefasst werden. Dabei wird zunächst auf den üblichen Begriff der Zuverlässigkeit eines Netzes im Sinne paarweiser Zusammenhangswahrscheinlichkeiten eingegangen. Dieser Begriff wird erweitert durch die Betrachtung der Zuverlässigkeit unter Einbeziehung einer maximal zulässigen Reisezeit. In vergangenen Arbeiten hat sich die Ring-Radius-Struktur als bewährtes Modell für die theoretische Beschreibung von Verkehrsnetzen erwiesen. Diese Überlegungen sollen nun durch Einbeziehung realer Verkehrsnetzstrukturen erweitert werden. Als konkretes Beispiel dient das Straßenbahnnetz von Krakau. Hier soll insbesondere untersucht werden, welche Auswirkungen ein geplanter Ausbau des Netzes auf die Zuverlässigkeit haben wird. This paper is involved with CIVITAS-CARAVEL project: "Clean and better transport in cites". The project has received research funding from the Community's Sixth Framework Programme. The paper reflects only the author's views and the Community is not liable for any use that may be made of the information contained therein.
Wir betrachten im ÖPNV (Öffentlichen Personennahverkehr) diejenige Situation, daß zwei Bus- oder Straßenbahnlinien gemeinsame Haltestellen haben. Ziel unserer Untersuchungen ist es, für beide Linien einen solchen Fahrplan zu finden, der für die Fahrgäste möglichst viel Bequemlichkeit bietet. Die Bedarfsstruktur - die Anzahl von Personen, die die beiden Linien benutzen - setzt dabei gewisse Beschränkungen für die Taktzeiten der beiden Linien. Die verbleibenden Entscheidungsfreiheiten sollen im Sinne der Zielstellung ausgenutzt werden. Im Vortrag wird folgenden Fragen nachgegangen: - nach welchen Kriterien kann man die "Bequemlichkeit" oder die "Synchonisationsgüte" messen? - wie kann man die einzelnen "Synchronisationsmaße" berechnen ? - wie kann man die verbleibenden Entscheidungsfreiheiten nutzen, um eine möglichst gute Synchronisation zu erreichen ? Die Ergebnisse werden dann auf einige Beispiele angewandt und mit den bereitgestellten Methoden Lösungsvorschläge unterbreitet.
In civil engineering it is very difficult and often expensive to excite constructions such as bridges and buildings with an impulse hammer or shaker. This problem can be avoided with the output-only method as special feature of stochastic system identification. The permanently existing ambient noise (e.g. wind, traffic, waves) is sufficient to excite the structures in their operational conditions. The output-only method is able to estimate the observable part of a state-space-model which contains the dynamic characteristics of the measured mechanical system. Because of the assumption that the ambient excitation is white there is no requirement to measure the input. Another advantage of the output-only method is the possibility to get high detailed models by a special method, called polyreference setup. To pretend the availability of a much larger set of sensors the data from varying sensor locations will be collected. Several successive data sets are recorded with sensors at different locations (moving sensors) and fixed locations (reference sensors). The covariance functions of the reference sensors are bases to normalize the moving sensors. The result of the following subspace-based system identification is a high detailed black-box-model that contains the weighting function including the well-known dynamic parameters eigenfrequencies and mode shapes of the mechanical system. Emphasis of this lecture is the presentation of an extensive damage detection experiment. A 53-year old prestressed concrete tied-arch-bridge in Hünxe (Germany) was deconstructed in 2005. Preliminary numerous vibration measurements were accomplished. The first experiment for system modification was an additional support near the bridge bearing of one main girder. During a further experiment one hanger from one tied arch was cut through as an induced damage. Some first outcomes of the described experiments will be presented.
Due to the amount of flow simulation and measurement data, automatic detection, classification and visualization of features is necessary for an inspection. Therefore, many automated feature detection methods have been developed in recent years. However, only one feature class is visualized afterwards in most cases, and many algorithms have problems in the presence of noise or superposition effects. In contrast, image processing and computer vision have robust methods for feature extraction and computation of derivatives of scalar fields. Furthermore, interpolation and other filter can be analyzed in detail. An application of these methods to vector fields would provide a solid theoretical basis for feature extraction. The authors suggest Clifford algebra as a mathematical framework for this task. Clifford algebra provides a unified notation for scalars and vectors as well as a multiplication of all basis elements. The Clifford product of two vectors provides the complete geometric information of the relative positions of these vectors. Integration of this product results in Clifford correlation and convolution which can be used for template matching of vector fields. For frequency analysis of vector fields and the behavior of vector-valued filters, a Clifford Fourier transform has been derived for 2D and 3D. Convolution and other theorems have been proved, and fast algorithms for the computation of the Clifford Fourier transform exist. Therefore the computation of Clifford convolution can be accelerated by computing it in Clifford Fourier domain. Clifford convolution and Fourier transform can be used for a thorough analysis and subsequent visualization of flow fields.
In this paper an adaptive heterogeneous multiscale model, which couples two substructures with different length scales into one numerical model is introduced for the simulation of damage in concrete. In the presented approach the initiation, propagation and coalescence of microcracks is simulated using a mesoscale model, which explicitly represents the heterogeneous material structure of concrete. The mesoscale model is restricted to the damaged parts of the structure, whereas the undamaged regions are simulated on the macroscale. As a result an adaptive enlargement of the mesoscale model during the simulation is necessary. In the first part of the paper the generation of the heterogeneous mesoscopic structure of concrete, the finite element discretization of the mesoscale model, the applied isotropic damage model and the cohesive zone model are briefly introduced. Furthermore the mesoscale simulation of a uniaxial tension test of a concrete prism is presented and own obtained numerical results are compared to experimental results. The second part is focused on the adaptive heterogeneous multiscale approach. Indicators for the model adaptation and for the coupling between the different numerical models will be introduced. The transfer from the macroscale to the mesoscale and the adaptive enlargement of the mesoscale substructure will be presented in detail. A nonlinear simulation of a realistic structure using an adaptive heterogeneous multiscale model is presented at the end of the paper to show the applicability of the proposed approach to large-scale structures.
Die Liquiditätsplanung von Bauunternehmen XE "Liquiditätsplanung" gilt als ein wesentliches Steuerungs-, Kontroll- sowie Informationsinstrument für interne und externe Adressaten und übt eine Entscheidungsunterstützungsfunktion aus. Da die einzelnen Bauprojekte einen wesentlichen Anteil an den Gesamtkosten des Unternehmens ausmachen, besitzen diese auch einen erheblichen Einfluß auf die Liquidität und die Zahlungsfähigkeit der Bauunternehmung. Dem folgend ist es in der Baupraxis eine übliche Verfahrensweise, die Liquiditätsplanung zuerst projektbezogen zu erstellen und anschließend auf Unternehmensebene zu verdichten. Ziel der Ausführungen ist es, die Zusammenhänge von Arbeitskalkulation XE "Arbeitskalkulation" , Ergebnisrechnung XE "Ergebnisrechnung" und Finanzrechnung XE "Finanzrechnung" in Form eines deterministischen XE "Erklärungsmodells" Planungsmodells auf Projektebene darzustellen. Hierbei soll das Verständnis und die Bedeutung der Verknüpfungen zwischen dem technisch-orientierten Bauablauf und dessen Darstellung im Rechnungs- und Finanzwesen herausgestellt werden. Die Vorgänge aus der Bauabwicklung, das heißt die Abarbeitung der Bauleistungsverzeichnispositionen und deren zeitliche Darstellung in einem Bauzeitenplan sind periodisiert in Größen der Betriebsbuchhaltung (Leistung, Kosten) zu transformieren und anschließend in der Finanzrechnung (Einzahlungen., Auszahlungen) nach Kreditoren und Debitoren aufzuschlüsseln.
We consider efficient numerical methods for the solution of partial differential equations with stochastic coefficients or right hand side. The discretization is performed by the stochastic finite element method (SFEM). Separation of spatial and stochastic variables in the random input data is achieved via a Karhunen-Loève expansion or Wiener's polynomial chaos expansion. We discuss solution strategies for the Galerkin system that take advantage of the special structure of the system matrix. For stochastic coefficients linear in a set of independent random variables we employ Krylov subspace recycling techniques after having decoupled the large SFEM stiffness matrix.
In many branches companies often lose the visibility of their human and technical resources of their field service. On the one hand the people in the fieldservice are often free like kings on the other hand they do not take part of the daily communication in the central office and suffer under the lacking involvement in the decisions inside the central office. The result is inefficiency. Reproaches in both directions follow. With the radio systems and then mobile phones the ditch began to dry up. But the solutions are far from being productive.
HYPERMONOGENIC POLYNOMIALS
(2006)
It is well know that the power function is not monogenic. There are basically two ways to include the power function into the set of solutions: The hypermonogenic functions or holomorphic Cliffordian functions. L. Pernas has found out the dimension of the space of homogenous holomorphic Cliffordian polynomials of degree m, but his approach did not include a basis. It is known that the hypermonogenic functions are included in the space of holomorphic Cliffordian functions. As our main result we show that we can construct a basis for the right module of homogeneous holomorphic Cliffordian polynomials of degree m using hypermonogenic polynomials and their derivatives. To that end we first recall the function spaces of monogenic, hypermonogenic and holomorphic Cliffordian functions and give the results needed in the proof of our main theorem. We list some basic polynomials and their properties for the various function spaces. In particular, we consider recursive formulas, rules of differentiation and properties of linear independency for the polynomials.
Traffic simulation is a valuable tool for the design and evaluation of road networks. Over the years, the level of detail to which urban and freeway traffic can be simulated has increased steadily, shifting from a merely qualitative macroscopic perspective to a very detailed microscopic view, where the behavior of individual vehicles is emulated realistically. With the improvement of behavioral models, however, the computational complexity has also steadily increased, as more and more aspects of real-life traffic have to be considered by the simulation environment. Despite the constant increase in computing power of modern personal computers, microscopic simulation stays computationally expensive, limiting the maximum network size than can be simulated on a single-processor computer in reasonable time. Parallelization can distribute the computing load from a single computer system to a cluster of several computing nodes. To this end, the exisiting simulation framework had to be adapted to allow for a distributed approach. As the simulation is ultimately targeted to be executed in real-time, incorporating real traffic data, only a spatial partition of the simulation was considered, meaning the road network has to be partitioned into subnets of comparable complexity, to ensure a homogenous load balancing. The partition process must also ensure, that the division between subnets does only occur in regions, where no strong interaction between the separated road segments occurs (i.e. not in the direct vicinity of junctions). In this paper, we describe a new microscopic reasoning voting strategy, and discuss in how far the increasing computational costs of these more complex behaviors lend themselves to a parallelized approach. We show the parallel architecture employed, the communication between computing units using MPIJava, and the benefits and pitfalls of adapting a single computer application to be used on a multi-node computing cluster.
The use of process models in the analysis, optimization and simulation of processes has proven to be extremely beneficial in the instances where they could be applied appropriately. However, the Architecture/Engineering/Construction (AEC) industries present unique challenges that complicate the modeling of their processes. A simple Engineering process model, based on the specification of Tasks, Datasets, Persons and Tools, and certain relations between them, have been developed, and its advantages over conventional techniques have been illustrated. Graph theory is used as the mathematical foundation mapping Tasks, Datasets, Persons and Tools to vertices and the relations between them to edges forming a directed graph. The acceptance of process modeling in AEC industries not only depends on the results it can provide, but the ease at which these results can be attained. Specifying a complex AEC process model is a dynamic exercise that is characterized by many modifications over the process model's lifespan. This article looks at reducing specification complexity, reducing the probability for erroneous input and allowing consistent model modification. Furthermore, the problem of resource leveling is discussed. Engineering projects are often executed with limited resources and determining the impact of such restrictions on the sequence of Tasks is important. Resource Leveling concerns itself with these restrictions caused by limited resources. This article looks at using Task shifting strategies to find a near-optimal sequence of Tasks that guarantees consistent Dataset evolution while resolving resource restrictions.
In this paper we consider three different methods for generating monogenic functions. The first one is related to Fueter's well known approach to the generation of monogenic quaternion-valued functions by means of holomorphic functions, the second one is based on the solution of hypercomplex differential equations and finally the third one is a direct series approach, based on the use of special homogeneous polynomials. We illustrate the theory by generating three different exponential functions and discuss some of their properties. Formula que se usa em preprints e artigos da nossa UI&D (acho demasiado completo): Partially supported by the R\&D unit \emph{Matem\'atica a Aplica\c\~es} (UIMA) of the University of Aveiro, through the Portuguese Foundation for Science and Technology (FCT), co-financed by the European Community fund FEDER.
We establish the basis of a discrete function theory starting with a Fischer decomposition for difference Dirac operators. Discrete versions of homogeneous polynomials, Euler and Gamma operators are obtained. As a consequence we obtain a Fischer decomposition for the discrete Laplacian. For the sake of simplicity we consider in the first part only Dirac operators which contain only forward or backward finite differences. Of course, these Dirac operators do not factorize the classic discrete Laplacian. Therefore, we will consider a different definition of a difference Dirac operator in the quaternionic case which do factorizes the discrete Laplacian.
Die heute erhältlichen Web-Content Management-Systeme (WCMS) verfügen über ein umfangreiches und breit gefächertes Angebot an Funktionen, die weit über die, zur Redaktion und zum Management von Internetpräsentationen, not-wendigen Grundanforderungen hinausgehen. Das macht diese Systeme in ih-ren Einsatz sehr flexibel und deckt vielfältige Anforderungen der Endanwender ab. Andererseits steigt durch die dadurch bedingte Komplexität der Arbeitsauf-wand erheblich und die Bedien- und Benutzerfreundlichkeit sinkt. Gerade für kleinere Internetpräsentationen, die ohne aufwendige Interaktionsmöglichkeiten aber auf häufig wechselndem Informationsangeboten aufwarten, wäre dies in seiner Grundfunktionalität reduziertes System vorteilhaft. Ein solches reduziertes Web-Content Management-System soll während der Diplomarbeit entworfen und beispielhaft implementiert werden. Als Ausgangs- und Orientierungspunkt soll hierzu die Internetpräsentation der Professur Informations- und Wissensverarbeitung dienen. Zur softwaretechnischen Umsetzung sind PHP und MySQL in Verbindung mit regulären HTML und CSS zu be-nutzen. Für das weitere Vorgehen müssen zunächst die Struktur und der Aufbau der Internetpräsentation der Professur analysiert, strukturiert und formalisiert werden. Anschließend sind die am häufigsten professionell genutzten Webcontent-Managementsysteme (TYPO3 und weitere siehe www.opensourcecms.com) hinsichtlich der durch sie angebotenen Grundfunktionalitäten und der verwen-deten Templates und Vorlagen zu untersuchen. Die aus dieser Analyse resultierenden Ergebnisse sind Ausgangspunkt für die Anforderungsdefinition des zu erstellenden Mini-WCMS. Anschließend ist eine prototypische Implementierung des theoretisch entstan-denen Systems, zugeschnitten auf die speziellen Bedürfnisse der Professur, vorzunehmen und hinsichtlich seiner Eignung zu diskutieren.
LIFETIME-ORIENTED OPTIMIZATION OF BRIDGE TIE RODS EXPOSED TO VORTEX-INDUCED ACROSS-WIND VIBRATIONS
(2006)
In recent years, damages in welded connections plates of vertical tie rods of several arched steel bridges have been reported. These damages are due to fatigue caused by wind-induced vibrations. In the present study, such phenomena are examined, and the corresponding lifetime of a reference bridge in Münster-Hiltrup, Germany, is estimated, based on the actual shape of the connection plate. Also, the results obtained are compared to the expected lifetime of a connection plate, whose geometry has been optimized separately. The structural optimization, focussing on the shape of the cut at the hanger ends, has been carried out using evolution strategies. The oscillation amplitudes have been computed by means of the Newmark-Wilson time-step method, using an appropriate load model, which has been validated by on-site experiments on the selected reference bridge. Corresponding stress-amplitudes are evaluated by multiplying the oscillation amplitudes with a stress concentration factor. This factor has been computed on the basis of a finite element model of the system "hanger-welding-connection plate", applying solid elements, according to the notch stress approach. The damage estimation takes into account the stochastics of the exciting wind process, as well as the stochastics of the material parameters (fatigue strength) given in terms of Woehler-curves. The shape optimization results in a substantial increase of the estimated hanger lifetime. The comparison of the lifetimes of the bulk plate and of the welding revealed that, in the optimized structure, the welding, being the most sensitive part in the original structure, shows much more resistance against potential damages than the bulk material.
Für die Optimierung eines bereits bestehenden Prozesses, z.B. im Hinblick auf den maximal möglichen Durchsatz bei gleich bleibender Qualität der Pyrolyseprodukte oder für die Einstellung der Betriebsparameter bei einem unbekannten Einsatzstoff, kann ein mathematisches Modell eine erste Abschätzung für die Einstellung betrieblicher Parameter, wie z.B. Temperaturprofile im Gas und Feststoff, geben. Darüber hinaus kann man mit einem Modell für neu zu konzipierende Anlagen konstruktive Parameter ermitteln oder überprüfen. In dem hier dargestellten vereinfachten Modellansatz werden u. a. die Umsatzvorgänge für ein Partikelkollektiv mit Hilfe von Summenparametern aus Untersuchungen an einer Thermowaage und ergänzend im Drehrohr ermittelt. Das Prozessmodell basiert auf einem Reaktormodell, das das Verweilzeitverhalten des Einsatzstoffes im Reaktor beschreibt und einem Basismodell, bestehend aus Massen- und Energiebilanzen für Solid und Gas sowie Ansätzen zur Trocknung und zum Umsatz. Im Hinblick auf die Verfügbarkeit von stoffspezifischen Daten von Abfällen sind insbesondere zur Berechnung des Verweilzeitverhaltens und des Umsatzes im Heißbetrieb vereinfachende Ansätze durch die Bildung von Summenparametern hilfreich. Das Prozessmodell wurde schrittweise validiert: Zunächst wurde in Kaltversuchen ein Summenparameter, der u.a. die unbekannten Reibungsverhältnisse im Drehrohr berücksichtigt, durch Vergleich von Experiment und Rechnung für Sand ermittelt. Für heterogene Abfallgemische kann dieser Materialfaktor zwar für Kaltversuche bestimmt werden (soweit dies für Abfälle möglich ist), im Heißbetrieb ändern sich jedoch alle wesentlichen Stoffparameter wie Partikeldurchmesser, Schüttdichte und Schüttwinkel sowie die Reibungsverhältnisse. Für diesen Fall wird der Materialfaktor zu Eins gesetzt und die wesentlichen Stoffgrößen umsatzabhängig modelliert. Dazu ist die Kenntnis der Schüttdichten, statischen Schüttwinkel und mittleren Partikeldurchmesser vom Abfall und Koks aus dem Abfall notwendig. Die mit diesen Stoffdaten berechnete Verweilzeit wurde in einem Heißversuch bei der Pyrolyse von Brennstoff aus Müll- (BRAM) Pellets mit einem Fehler von ca. 20 % erreicht. Das Basismodell wurde zunächst ohne Umsatz an Messergebnisse mit Sand im Drehrohr unter Variation von Temperaturen und Massenstrom angepasst bevor mit diesem Modell die Pyrolyse von einem homogenen Einsatzstoff (Polyethylen mit Sand) im Drehrohr berechnet wurde. Hier konnte bereits gezeigt werden, dass mit diesem vereinfachten Modellansatz gute Ergebnisse beim Vergleich von Modell und Experiment erzielt werden können. Im nächsten Schritt wurde der Sand angefeuchtet, um die Teilmodelle der Trocknung unterhalb und bei Siedetemperatur zu validieren. Die Mess- und Modellierungsergebnisse stimmen gut miteinander überein. Für ein Abfallgemisch aus BRAM-Pellets konnte der Verlauf der Solidtemperaturen unter der Berücksichtigung variabler Stoffwerte des Solids und eines Verschmutzungsfaktors, der den Belag des Drehrohres mit anklebendem Pellets bis zur Verkokung berücksichtigt, gut wiedergegeben werden. Die Gastemperaturen können in erster Näherung ausreichend genau durch das mathematische Modell beschrieben werden. Mit diesem vereinfachten mathematischen Modellansatz steht nun ein Hilfsmittel zur Auslegung und Optimierung von indirekt beheizten Drehrohren zur Verfügung, um bei einem neuen Einsatzstoff mit Daten aus experimentellen Basisuntersuchungen, die Temperaturverläufe im Feststoff und Gas sowie die Gaszusammensetzung in Abhängigkeit der wesentlichen Einflussgrößen abzuschätzen.
Die Arbeit befasst sich mit der Anwendung faserverstärkter Kunststoffe für Tragwerke des Hochbaus. Es wird ein geschichtlicher Überblick über die Jahre 1950 bis 1980 gegeben und dabei herausgestellt, wie es 1. zur Einführung des bis 1950 unbekannten Werkstoffes im Bauwesen kommen konnte 2. welche Personen und Institute maßgeblich an der Einführung und Entwicklung des Bauens mit FVK beteiligt waren 3. welche Tragwerke verwendet wurden 4. wie die Pioniere diese Tragwerke bemaßen 5. welche konstruktiven Besonderheiten sich mit der Verwendung von FVK in der Tragstruktur ergaben Nach einer Einführung werden im Kapitel 2 die wichtigsten Faktoren der Entwicklung von Tragwerken aus GFK erörtert. Im Kapitel 3 wird die Technik der Fertigung von GFK-Teilen und deren Fügung beschrieben. Im Kapitel 4 werden die Tragwerke beschrieben und einzelne Tragwerkstypen eingehend erörtert. Im Kapitel 5 werden die Bemessungskonzepte und deren Entwicklung erörtert. In der Bilanz werden die Faktoren aufgezählt, die zum Abklingen des Bauens mit FVK in der Tragstruktur geführt haben. Die Arbeit wird ergänzt durch eine ca. 40-seitige Tabelle in der die gebauten Tragwerke in Abhängigkeit von den technischen Parametern Spannweiten und Lasten dargestellt werden. Im Anhang werden 10 exemplarische Bauten detailliert erörtert.
The mathematical and technical foundations of optimization have been developed to a large extent. In the design of buildings, however, optimization is rarely applied because of insufficient adaptation of this method to the needs of building design. The use of design optimization requires the consideration of all relevant objectives in an interactive and multidisciplinary process. Disciplines such as structural, light, and thermal engineering, architecture, and economics impose various objectives on the design. A good solution calls for a compromise between these often contradictory objectives. This presentation outlines a method for the application of Multidisciplinary Design Optimization (MDO) as a tool for the designing of buildings. An optimization model is established considering the fact that in building design the non-numerical aspects are of major importance than in other engineering disciplines. A component-based decomposition enables the designer to manage the non-numerical aspects in an interactive design optimization process. A façade example demonstrates a way how the different disciplines interact and how the components integrate the disciplines in one optimization model. In this grid-based façade example, the materials switch between a discrete number of materials and construction types. For light and thermal engineering, architecture, and economics, analysis functions calculate the performance; utility functions serve as an important means for the evaluation since not every increase or decrease of a physical value improves the design. For experimental purposes, a genetic algorithm applied to the exemplary model demonstrates the use of optimization in this design case. A component-based representation first serves to manage non-numerical characteristics such as aesthetics. Furthermore, it complies with usual fabrication methods in building design and with object-oriented data handling in CAD. Therefore, components provide an important basis for an interactive MDO process in building design.
In today’s information society the vast technical progress and the sinking cost of information and communication technology provide new opportunities for information supply, and new technical support for communication and cooperation over distance. These trends also entail challenges such as supplying information that is adequate for a particular person in a specific situation as well as managing communication among geographically distributed parties efficiently. Context-aware systems that use sensors in order to analyse their environment and to adapt their behaviour. Yet, adequate tools for developing sensor-based infrastructures are missing. We have designed and developed Sens-ation, an open and generic service-oriented platform, which provides powerful, yet easy-to-use, tools to software developers who want to develop context-aware, sensor-based infrastructures. The service-oriented paradigm of Sens-ation enables standardised communication within individual infrastructures, between infrastructures and their sensors, but also among distributed infrastructures. On a whole, Sens-ation facilitates the development allowing developers to concentrate on the semantics of their infrastructures, and to develop innovative concepts and implementations of context-aware systems.
Early sensor-based infrastructures were often developed by experts with a thorough knowledge of base technology for sensing information, for processing the captured data, and for adapting the system’s behaviour accordingly. In this paper we argue that also end-users should be able to configure Ubiquitous Computing environments. We introduce the CollaborationBus application: a graphical editor that provides abstractions from base technology and thereby allows multifarious users to configure Ubiquitous Computing environments. By composing pipelines users can easily specify the information flows from selected sensors via optional filters for processing the sensor data to actuators changing the system behaviour according to the users’ wishes. Users can compose pipelines for both home and work environments. An integrated sharing mechanism allows them to share their own compositions, and to reuse and build upon others’ compositions. Real-time visualisations help them understand how the information flows through their pipelines. In this paper we present the concept, implementation, and early user feedback of the CollaborationBus application.
For efficient distant cooperation the members of workgroups need information about each other. This need for information disclosure often conflicts with the users' wishes for privacy. In the literature often reciprocity is suggested as a solution to this trade-off. Yet, this conception of reciprocity and its enforcement by systems does not match reality. In this paper we present our study's major findings investigating the role of reciprocity among which we found that participants greatly disregarded the above conception. Additionally we discuss their significant implications for the design of systems seeking to disclose personal information.
We propose a new approach to the numerical solution of quasi-static elastic-plastic problems based on the Moreau-Yosida theorem. After the time discretization, the problem is expressed as an energy minimization problem for unknown displacement and plastic strain fields. The dependency of the minimization functional on the displacement is smooth whereas the dependency on the plastic strain is non-smooth. Besides, there exists an explicit formula, how to calculate the plastic strain from a given displacement field. This allows us to reformulate the original problem as a minimization problem in the displacement only. Using the Moreau-Yosida theorem from the convex analysis, the minimization functional in the displacements turns out to be Frechet-differentiable, although the hidden dependency on the plastic strain is non-differentiable. The seconds derivative exists everywhere apart from the elastic-plastic interface dividing elastic and plastic zones of the continuum. This motivates to implement a Newton-like method, which converges super-linearly as can be observed in our numerical experiments.
Recent radiometric compensation techniques make it possible to project images onto colored and textured surfaces. This is realized with projector-camera systems by scanning the projection surface on a per-pixel basis. With the captured information, a compensation image is calculated that neutralizes geometric distortions and color blending caused by the underlying surface. As a result, the brightness and the contrast of the input image is reduced compared to a conventional projection onto a white canvas. If the input image is not manipulated in its intensities, the compensation image can contain values that are outside the dynamic range of the projector. They will lead to clipping errors and to visible artifacts on the surface. In this article, we present a novel algorithm that dynamically adjusts the content of the input images before radiometric compensation is carried out. This reduces the perceived visual artifacts while simultaneously preserving a maximum of luminance and contrast. The algorithm is implemented entirely on the GPU and is the first of its kind to run in real-time.
RESEARCH OF DEFORMATION OF MULTILAYERED PLATES ON UNDEFORMABLE BASIS BY UNFLEXURAL SPECIFIED MODEL
(2006)
Stress-strain state (SSS) of multilayered plates on undeformable foundation is investigated. The settlement circuit of transverse loaded plate is formed by symmetrical attaching of a plate concerning a surface of contact to the foundation. The plate of the double thickness becomes bilateral symmetrically loaded concerning its median surface. It allows to model only unflexural deformation that reduces amount of unknown and the general order of differentiation of resolving system of the equations. The developed refined continual model takes into account deformations of transverse shear and transverse compression in high iterative approximation. Rigid contact between the foundation and a plate, and also shear without friction on a surface of contact of a plate with the foundation is considered. Calculations confirm efficiency of such approach, allowing to receive decisions which is qualitative and quantitatively close to three-dimensional solutions.
Ausgehend von den fundierten Erfahrungen, die für das Schweißen von verschiedensten Metallen vorliegen, wird an der Professur Stahlbau der Bauhaus-Universität Weimar ein neuartiges Verfahren zum CO2-Laserstrahlschweißen von Quarzglas numerisch untersucht. Dabei kommt die kommerzielle FE-Software SYSWELD® zum Einsatz. Die erforderlichen Versuche werden in Zusammenarbeit mit dem Institut für Fügetechnik und Werkstoffprüfung GmbH aus Jena realisiert. Die numerische Analyse wird eingesetzt, um geeignete Prozessparameter zu bestimmen und deren Auswirkungen auf die transienten thermischen und mechanischen Vorgänge, die während des Schweißvorgangs ablaufen abzubilden. Um die aus der Simulation erhaltenen Aussagen zu überprüfen, ist es erforderlich, das Berechnungsmodell mittels Daten aus Versuchsschweißungen zu kalibrieren. Dabei sind die verwendeten Materialmodelle sowie die der Simulation zugrunde gelegten Materialkennwerte zu validieren. Es stehen verschiedene rheologische Berechnungsmodelle zur Auswahl, die die viskosen Materialeigenschaften des Glases abbilden. Dabei werden die drei mechanischen Grundelemente, die HOOKEsche Feder, der NEWTONsche Dämpfungszylinder und das ST.-VENANT-Element miteinander kombiniert. Die Möglichkeit, thermische und mechanische Vorgänge innerhalb des Glases während des Schweißvorgangs und nach vollständiger Abkühlung, vorhersagen zu können, gestattet es den Schweißvorgang über eine Optimierung der Verfahrensparameter gezielt dahingehend zu beeinflussen, die Wirtschaftlichkeit des Schweißverfahrens zu verbessern, und ein zuverlässiges Schweißergebnis zu erhalten. Dabei können auch nur unter hohem experimentellen Aufwand durchführbare Versuche simuliert werden, um eine Vorhersage zu treffen, ob es zweckmäßig ist, den Versuch auch in der Praxis zu fahren. Dies führt zu einer Reduzierung des experimentellen Aufwandes und damit zu einer Verkürzung des Entwicklungszeitraumes für das angestrebte Verfahren.
Solid behavior as well as liquid behavior characterizes the flow of granular material in silos. The presented model is based on an appropriate interaction of a displacement field and a velocity field. The constitutive equations and the applied algorithm are developed from the exact solution for a standard case. The standard case evolves from a very tall vertical plane strain silo containing material that flows at a constant speed. No horizontal displacements and velocities take place. No changes regarding the field values arise in the vertical direction and in time. Tension is not allowed at any point. Coulomb friction represents the effects of the vertical walls. The interaction between the flowing material and the walls is covered by a forced boundary condition resulting in an additional matrix for the solid component as well as for the liquid component. The resulting integral equations are designed to be solved directly. Three coefficients describe the properties of the granular material. They govern elastic solid behavior in combination with viscous liquid behavior.