Refine
Document Type
- Doctoral Thesis (494) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (14)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
The thesis addresses journalistic, administrative and judicial historical documentation to analyze the links between aridity and geographical imaginaries in the province of Catamarca (Argentina), from a historical point of view. The research aims to contribute to the understanding of the "non-hegemonic" versions of Modernity, its territoriality and the productions of geographic imaginaries that they involve. To provide a broad purpose, it raises as an object of study the ways in which "modern" practices, actors, links, discourses and expectations about the territory are mobilized when they are located in a space in "other" water conditions. those that are intended to "civilize" it.
The general objective of the research is to analyze time-space controversies around water in the city and valley of Catamarca towards 19th and 20th centuries. The specific objectives derived are a) analyzing how various actors are related to waters behavior - in other words, the local water regime – in Catamarca and the meanings built around it. b) to analyze the controversies about the place of Catamarca and its water regime in the local and national geographic imaginary. c) analyze controversies in which the relationships between actors and materialities involved in modernization projects are put into discussion.
These concerns by the experience of the actors and by the historical-spatial imagination of the territory, combined, led to the construction of an interdisciplinary methodology based on tools from anthropology, sociology, geography and history.
Heat, gas, and leachate are primary by-products of landfill processes in municipal solid waste landfills. In nuclear waste repository, temperature of the waste also raises due to radioactivity processes. Temperature increase in the repository induces hydro-mechanical processes of its sealing material. Moderate to high temperature is expected to be encountered in the field situation. In this thesis, a study on the thermo-hydro-mechanical behavior of compacted bentonite-sand mixtures which are among the materials proposed to be used as sealing material for landfills and hazardous waste repository is presented. Mixtures of a calcium-type bentonite, Calcigel, and quartz sand were used in this study. Series of tests including suction and swelling pressure measurement, drying-wetting under unconfined and confined conditions were conducted at a moderately high temperature. Tests at room temperature including basic and physico-chemical characterization, microstructure and fabric studies, and osmotic suction were conducted in order to provide insight into understanding the hydro-mechanical processes taking place in the bentonite. The experimental data obtained are presented and compared to the result of the previous tests for the same material performed by other researchers at room temperature. The changes in hydro-mechanical behavior due to elevated temperature were analyzed and discussed based on the suction components of soil which are influenced by temperature. At the end, conclusions concerning the temperature effects on the hydro-mechanical behavior of the materials are drawn and suggestions for future studies are made.
The conservation of living heritage sites is a highly complex process. Two factors need careful consideration in order to achieve a balance in the management of such sites: the conservation demands of conservation experts for built heritage and the needs of local people for development of their heritage living space. The complexity of factors involved make for an interesting study of living heritage, taken up by this research in its main case study of the town of Nan in Thailand.
Research into the historical background of Nan and its cultural heritage reveals a living heritage site, which is both unique and diverse. Present day Nan was examined using a variety of analysis tools, which were applied to data from interviews, empirical data, field surveys, and documents, in order to better understand the nature of the living heritage site and changing trends over time. Luang Prabang in Lao PDR, a World Heritage site since 1995, was also selected as a further case study with which to compare Nan’s potential World Heritage status from a point of view of changes to living heritage attributes.
The outcomes of the research indicate the importance of the management of the sites, which can be at risk of losing balance by focusing on one aspect of heritage to the detriment of the other. The conservation perspective, if allowed to dominate, as in Luang Prabang, can cause irreparable damage to the social fabric, where the development needs of the town are not met. This research concludes that a balance of power amongst stakeholders in the collaborative networks managing such sites is vital to sustaining a balance of living heritage attributes.
Housing estates were fundamentally conceived upon state socialist utopia ideas to provide standard housing for citizens. While former state socialist housing estates have been extensively researched in the field of architecture, urban and sociology studies, there is still a gap in identifying how production processes affect morphological changes during the post-socialist era. This thesis compares the processes in the production of the largest housing estates of Marzahn in GDR and Petržalka in Czechoslovakia from 1970 to 1989 through contextual analysis of primary and secondary sources, which include visual maps, diagrams from professional architecture and planning journals, government documents and textbooks, as well as academic journals, books and newspaper articles. Then it discusses how these processes inadvertently created conducive conditions affecting their development in the market economy after 1989. It then interprets the results through application of Actor-Network Theory and Historical Institutionalism, while conceptualising them through David Harvey’s dialectical utopianism theory. Harvey (2000) delineates two types of utopia, one of spatial form and one of process. The former refers to materialised ideals in physical forms whereas the latter refers to the ongoing process of spatializing. The thesis aims to show how the production of Marzahn in GDR was more path dependent on policies established in 1950s and 1960s whereas Petržalka was a product of new Czechoslovakian policies in 1970s, changing aspects of the urban planning process, a manifestation of a more emphatic technocratic thinking on a wider scale. This ultimately influences the trajectories of development after 1989, showing more effects in Petržalka.
Biomembranes are selectively permeable barriers that separate the internal components of the cell from its surroundings. They have remarkable mechanical behavior which is characterized by many phenomena, but most noticeably their fluid-like in-plane behavior and solid-like out-of-plane behavior. Vesicles have been studied in the context of discrete models, such as Molecular Dynamics, Monte Carlo methods, Dissipative Particle Dynamics, and Brownian Dynamics. Those methods, however, tend to have high computational costs, which limited their uses for studying atomistic details. In order to broaden the scope of this research, we resort to the continuum models, where the atomistic details of the vesicles are neglected, and the focus shifts to the overall morphological evolution. Under the umbrella of continuum models, vesicles morphology has been studied extensively. However, most of those studies were limited to the mechanical response of vesicles by considering only the bending energy and aiming for the solution by minimizing the total energy of the system. Most of the literature is divided between two geometrical representation methods; the sharp interface methods and the diffusive interface methods. Both of those methods track the boundaries and interfaces implicitly. In this research, we focus our attention on solving two non-trivial problems. In the first one, we study a constrained Willmore problem coupled with an electrical field, and in the second one, we investigate the hydrodynamics of a vesicle doublet suspended in an external viscous fluid flow.
For the first problem, we solve a constrained Willmore problem coupled with an electrical field using isogeometric analysis to study the morphological evolution of vesicles subjected to static electrical fields. The model comprises two phases, the lipid bilayer, and the electrolyte. This two-phase problem is modeled using the phase-field method, which is a subclass of the diffusive interface methods mentioned earlier. The bending, flexoelectric, and dielectric energies of the model are reformulated using the phase-field parameter. A modified Augmented-Lagrangian (ALM) approach was used to satisfy the constraints while maintaining numerical stability and a relatively large time step. This approach guarantees the satisfaction of the constraints at each time step over the entire temporal domain.
In the second problem, we study the hydrodynamics of vesicle doublet suspended in an external viscous fluid flow. Vesicles in this part of the research are also modeled using the phase-field model. The bending energy and energies associated with enforcing the global volume and area are considered. In addition, the local inextensibility condition is ensured by introducing an additional equation to the system. To prevent the vesicles from numerically overlapping, we deploy an interaction energy definition to maintain a short-range repulsion between the vesicles. The fluid flow is modeled using the incompressible Navier-Stokes equations and the vesicle evolution in time is modeled using two advection equations describing the process of advecting each vesicle by the fluid flow. To overcome the velocity-pressure saddle point system, we apply the Residual-Based Variational MultiScale (RBVMS) method to the Navier-Stokes equations and solve the coupled systems using isogeometric analysis. We study vesicle doublet hydrodynamics in shear flow, planar extensional flow, and parabolic flow under various configurations and boundary conditions.
The results reveal several interesting points about the electrodynamics and hydrodynamics responses of single vesicles and vesicle doublets. But first, it can be seen that isogeometric analysis as a numerical tool has the ability to model and solve 4th-order PDEs in a primal variational framework at extreme efficiency and accuracy due to the abilities embedded within the NURBS functions without the need to reduce the order of the PDE by creating an intermediate environment. Refinement whether by knot insertion, order increasing or both is far easier to obtain than traditional mesh-based methods. Given the wide variety of phenomena in natural sciences and engineering that are mathematically modeled by high-order PDEs, the isogeometric analysis is among the most robust methods to address such problems as the basis functions can easily attain high global continuity.
On the applicational side, we study the vesicle morphological evolution based on the electromechanical liquid-crystal model in 3D settings. This model describing the evolution of vesicles is composed of time-dependent, highly nonlinear, high-order PDEs, which are nontrivial to solve. Solving this problem requires robust numerical methods, such as isogeometric analysis. We concluded that the vesicle tends to deform under increasing magnitudes of electric fields from the original sphere shape to an oblate-like shape. This evolution is affected by many factors and requires fine-tuning of several parameters, mainly the regularization parameter which controls the thickness of the diffusive interface width. But it is most affected by the method used for enforcing the constraints. The penalty method in presence of an electrical field tends to lock on the initial phase-field and prevent any evolution while a modified version of the ALM has proven to be sufficiently stable and accurate to let the phase-field evolve while satisfying the constraints over time at each time step. We show additionally the effect of including the flexoelectric nature of the Biomembranes in the computation and how it affects the shape evolution as well as the effect of having different conductivity ratios. All the examples were solved based on a staggered scheme, which reduces the computational cost significantly.
For the second part of the research, we consider vesicle doublet suspended in a shear flow, in a planar extensional flow, and in a parabolic flow. When the vesicle doublet is suspended in a shear flow, it can either slip past each other or slide on top of each other based on the value of the vertical displacement, that is the vertical distance between the center of masses between the two vesicles, and the velocity profile applied. When the vesicle doublet is suspended in a planar extensional flow in a configuration that resembles a junction, the time in which both vesicles separate depends largely on the value of the vertical displacement after displacing as much fluid from between the two vesicles. However, when the vesicles are suspended in a tubular channel with a parabolic fluid flow, they develop a parachute-like shape upon converging towards each other before exiting the computational domain from the predetermined outlets. This shape however is affected largely by the height of the tubular channel in which the vesicle is suspended. The velocity essential boundary conditions are imposed weakly and strongly. The weak implementation of the boundary conditions was used when the velocity profile was defined on the entire boundary, while the strong implementation was used when the velocity profile was defined on a part of the boundary. The strong implementation of the essential boundary conditions was done by selectively applying it to the predetermined set of elements in a parallel-based code. This allowed us to simulate vesicle hydrodynamics in a computational domain with multiple inlets and outlets. We also investigate the hydrodynamics of oblate-like shape vesicles in a parabolic flow. This work has been done in 2D configuration because of the immense computational load resulting from a large number of degrees of freedom, but we are actively seeking to expand it to 3D settings and test a broader set of parameters and geometrical configurations.
In der vorliegenden Ph.D.-Arbeit werden die Bereiche Materialität, Objektkultur und Physical Computing adressiert. Der Autor erkennt nun durch die durchlaufene intensive theoretische Betrachtungsweise des Themas Materialität die Bedeutung von Tastsinn und Objektoberflächen für den Alltag des praktizierenden Gestalters und proklamiert eine Wende und Hinwendung der Designpraxis zu den Potenzialen von Materialität und deren Bedeutung für die Akteure. Die Aufgabe der Praxisforschung ist es, eine inklusive Optimierungsmethode des Produktdesigns zu gestalten, mit der Designentwicklungen durch überprüfbare Nutzungsdaten optimiert werden können. Die taktile Pilotmethode ergab auf Basis der Generierung von Nutzerkarten Erkenntnisse über biometrische Werte, individuelle Körpergrößen und unterschiedliche Handhabungsprinzipien.
As one of its primary objectives, Computer Graphics aims at the simulation of fabrics’ complex reflection behaviour. Characteristic surface reflectance of fabrics, such as highlights, anisotropy or retro-reflection arise the difficulty of synthesizing. This problem can be solved by using Bidirectional Texture Functions (BTFs), a 2D-texture under various light and view direction. But the acquisition of Bidirectional Texture Functions requires an expensive setup and the measurement process is very time-consuming. Moreover, the size of BTF data can range from hundreds of megabytes to several gigabytes, as a large number of high resolution pictures have to be used in any ideal cases. Furthermore, the three-dimensional textured models rendered through BTF rendering method are subject to various types of distortion during acquisition, synthesis, compression, and processing. An appropriate image quality assessment scheme is a useful tool for evaluating image processing algorithms, especially algorithms designed to leave the image visually unchanged. In this contribution, we present and conduct an investigation aimed at locating a robust threshold for downsampling BTF images without loosing perceptual quality. To this end, an experimental study on how decreasing the texture resolution influences perceived quality of the rendered images has been presented and discussed.
Next, two basic improvements to the use of BTFs for rendering are presented: firstly, the study addresses the cost of BTF acquisition by introducing a flexible low-cost step motor setup for BTF acquisition allowing to generate a high quality BTF database taken at user-defined arbitrary angles. Secondly, the number of acquired textures to the perceptual quality of renderings is adapted so that the database size is not overloaded and can fit better in memory when rendered.
Although visual attention is one of the essential attributes of HVS, it is neglected in most existing quality metrics. In this thesis an appropriate objective quality metric based on extracting visual attention regions from images and adequate investigation of the influence of visual attention on perceived image quality assessment, called Visual Attention Based Image Quality Metric (VABIQM), has been proposed. The novel metric indicates that considering visual saliency can offer significant benefits with regard to constructing objective quality metrics to predict the visible quality differences in images rendered by compressed and non-compressed BTFs and also outperforms straightforward existing image quality metrics at detecting perceivable differences.
Bei der direkten thermische Umwandlung von Gips in Stuckgips entstehen texturierte Halbhydratkristallite von geringer Beständigkeit gegen hygro-mechnische Beanspruchung. Überlässt man diese texturierten Kristallite einer natürlichen Alterung, werden \"Heilungseffekte\" beobachtet, die durch lokale Umkristallisierungsreaktion an Oberflächendefekten erklärt werden können. Die gealterten Stuckgipse sind stabiler gegen hygro-mechanische Beanspruchungen. Durch Besprühung von Gips mit verdünnten wässrigen Salzlösungen vor der Calcivierung entsteht aridisierter Stuck geringer texturiert und damit stabiler gegen hygro-mechanische Beanspruchungen.
Inhaltliche Struktur:
Theoretischer Teil: Um Kulturtechniken des künstlerischen Ausdruckes, und damit den Bezug zwischen Kunst und Medientechnologie zu ergründen, wurde das Verhältnis zwischen dem Betrachter und dem Betrachteten erforscht. Begriffe wie Originalität, Repräsentation, Imitation sowie Aneignung und Rezeption kommen an historischen Beispielen zur Diskussion.
Praktischer Teil: Mit zwei Ausstellungen (Malerei, Installation) wurden verschiedene Modelle des Sehens problematisiert, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur begründen. Außerdem wurden die Unterschiede zwischen Beobachter und Betrachter/Zuschauer in Ausstellungssituationen hinterfragt.
Kurzfassung:
Medientechnologie hat sich selbst zu einer Kunstform entwickelt. Sie kann Künstler dabei unterstützen, ihre Ideen handwerklich umzusetzen (Beispiel: Camera Obscura) und zu reflektieren. Dabei geht es um mehr als um technische Hilfmittel für den künstlerischen Ausdruck. Wird die Beziehung zwischen Betrachter und Betrachtetem als eine Transaktion gesehen, in der beide Begriffe gleichermaßen aufs Spiel gesetzt werden, dann ist es notwendig eine Visualität zu bestimmen, an der der Betrachter (im Sinne von Jonathan Crary) aktiv teilnimmt. Das Sehen darf nicht als absolute Erfahrung verstanden werden, denn einzeln analysiert – ohne Einbeziehung anderer Sinneswahrnehmungen und deren mediale Erweiterungen – führt es zu keinem adäquaten Verständnis davon, wie Bedeutungen produziert werden. Daraus ergibt sich die Forschungsfrage, wie die künstlerische Reaktion auf die im 19. Jahrhundert aufstrebenden Fotografie die Ausdrucksformen beeinflusste und ob sich die gegenseitige Abhängigkeit von Malerei und Fotografie wissenschaftlich-künstlerisch rekonstruieren lässt.
Die theoretische Referenz für diese Forschung bildeten Theorieansätze nicht der Kunstgeschichte, sondern der „Visual Culture Studies“, konkret: Martin Jay („Scopic Regimes of Modernity“), Jonathan Crary („Techniques of the Observer“) und Rosalind Krauss („Originality“).
Dazu wurde die Rezeption der aufkommenden Fotografie in der künstlerischen Produktion beispielhaft untersucht, wobei mit Eugène Delacroix, Gustave Caillebotte sowie dem künstlerischen Dialog zwischen Henri Matisse und Brassai die Problematik herausgearbeitet wurde, mit der sich die bildende Kunst im Lauf jener Jahrzehnte, in denen die Fotografie sich etabliert hat, konfrontiert sah. Sie war eine medientechnische Neuheit mit älteren Wurzeln und diente der Malerei als Hilfsmittel (Camera Obscura) und hat durch ihr technische Potenzial dennoch das Verständnis von Kunst radikal verändert: sie löste das Ideal einer bestimmten Maltechnik ab, die sich mit dem Verbergen des Pinselstriches verband, und bedeutete in diesem gewissen Sinn das „Ende der Kunst“ (nach Paul Delaroche).
Bis in die heutige Kunstproduktion zieht sich die Frage, was nach dem Ende der Perfektionierung von Reproduktion durch ihre Übernahme mittels medientechnischer Apparatur, die nun selbst zum Ausdruck strebt, überhaupt noch ein „Kunstwerk“ ist oder sein kann. Technisch gestützte Formen der Aneignung und Imitation stellen das klassische Wertemodell der meisterlich ausgeführten Repräsentation von Wirklichkeit in Frage, obwohl „Originalität“ angesichts der Flut von Reproduktionen doch immer noch - oder gerade deswegen - eine Wertschätzung erfährt.
Daher wurden dann auch im künstlerischen Teil verschiedene Modelle des Sehens getestet, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur beeinflussen und festlegen. Dabei wurde vor allem auch die Rolle der Beobachter reflektiert - die anders als bei Unterhaltungsmedien - in Kunstkontexten eben keine passiven Zuschauer sind. Was den Künstler, und was den Betrachter von Kunst definiert, lässt sich gleichwohl weder auf ein bestimmte Sinnlichkeit noch eine bestimmte Medientechnologie reduzieren.
Wie schon nach dem Aufkommen der Fotografie werden Künstler weiterhin auf der Suche nach neuen Ausdrucksformen sein, um andere Weltwahrnehmungen und neue, andere Perspektiven menschlicher Existenz zu erlangen. Mediale Technologien haben sie dabei immer schon unterstützt. Aus meiner Untersuchung schließe ich, dass neue Technologien Kunst nicht definitv beeinflussen, wohl aber ihren Entstehungsprozess verändern und beeinflussen können. Die Frage, wie das geschieht und welche Effekte es zeitigt, bedarf einer stets erneuerten Verhandlung.
Daraus folgt die Schlussfolgerung, dass man von Künstlern verlangen kann oder sogar muss, sich vor der Wirklichkeit der Technologie nicht zurückzuziehen, sondern sich medientechnische Kompetenzen anzueignen und sich aktiv am Diskurs um neue Technologien zu beteiligen.
Natural Urban Resilience: Understanding general urban resilience through Addis Ababa’s inner city
(2021)
This dissertation describes the urban actors and spatial practices that contribute to natural urban resilience in Addis Ababa’s inner city. Natural urban resilience is a non-strategical and bottom-up, everyday form of general urban resilience – an urban system’s ability to maintain its essential characteristics under any change. This study gains significance by exposing conceptual gaps in the current un-derstanding of general urban resilience and highlighting its unconvincing applicability to African cities. This study attains further relevance by highlighting the danger of the ongoing large-scale redevelopment of the inner city. The inner city has naturally formed, and its urban memory, spaces, and social cohesion contribute to its primarily low-income population’s resilience. This thesis argues that the inner city’s demolition poses an incalculable risk of maladaptation to future stresses and shocks for Addis Ababa. The city needs a balanced urban discourse that highlights the inner city’s qualities and suggests feasible urban transformation measures. “Natural Urban Resilience” contributes an empirical study to the debate by identifying those aspects of the inner city that contribute to general resilience and identifies feasible action areas. This study develops a qualitative research design for a single case study in Addis Ababa. The data is obtained through expert interviews, interviews with resi-dents, and the analysis of street scene photos, which are abstracted using Grounded Theory. That way, this thesis provides first-time knowledge about who and what generates urban resilience in the inner city of Addis Ababa and how. Furthermore, the study complements existing theories on general urban resilience. It provides a detailed understanding of the change mechanisms in resilience, of which it identifies four: adaptation, upgrading, mitigation, and resistance. It also adapts the adaptive cycle, a widely used concept in resilience thinking, conceptually for urban environments. The study concludes that the inner city’s continued redevelopment poses an incalculable threat to the entire city. Therefore, “Natural urban resilience” recommends carefully weighing any intervention in the inner city to promote Addis Ababa’s overall resilience. This dissertation proposes a pattern language for natural urban resilience to support these efforts and to translate the model of natural urban resilience into practice.
Die vorliegende Arbeit hatte zum Ziel, für Strecken mit 2+1-Verkehrsführung (Straßentyp RQ 15,5) ein Verfahren zum Nachweis der Verkehrsqualität zu entwickeln. Dabei wurden in einem ersten Schritt zunächst für freie Streckenabschnitte Beziehungen zwischen den Verkehrsstärken (q) und den mittleren Pkw-Reisegeschwindigkeiten (v) ermittelt und darauf aufbauend ein Bemessungsverfahren abgeleitet. In einem zweiten Schritt wurde das Verfahren erweitert, um für den Fall der Einbindung planfreier Knotenpunkte ebenfalls eine Bewertung vornehmen zu können. Bislang standen in Deutschland keine ausreichenden Erkenntnisse über den Zusammenhang zwischen q und v für Strecken mit einem RQ 15,5 zur Verfügung. Eine Literaturanalyse ergab, dass sich frühere Untersuchungen mehrheitlich mit dem Aspekt der Verkehrssicherheit beschäftigten. Somit stellten die eigenen Messungen und die daran anschließende Ergänzung von Daten mit Hilfe einer mikroskopischen Verkehrsflusssimulation den Schwerpunkt der Untersuchung dar. Die empirischen Untersuchungen hatten - verglichen mit q-v-Beziehungen für herkömmliche Landstraßenabschnitte - ein zum Teil deutlich höheres Geschwindigkeitsniveau bei vergleichbaren Verkehrsstärken zum Ergebnis. Darüber hinaus konnten zum Teil wesentlich höhere Überholraten festgestellt werden als bei einbahnig zweistreifigen Streckenabschnitten, bei denen ein Überholen im Gegenverkehr erlaubt ist. Zweifellos tragen auch die zweistreifigen Abschnitte eines RQ 15,5 dazu bei, Fahrzeugpulks aufzulösen. Für die aus mehreren aufeinander folgenden ein- und zweistreifigen Abschnitten bestehenden Untersuchungsstrecken, konnte jedoch insgesamt keine bedeutsame Pulkauflösung festgestellt werden. Dies ist vor allem dadurch begründet, dass die Strecken mit einem einstreifigen Abschnitt endeten. Das Simulationsprogramm LASI2+1 wurde speziell auf die Simulation des Verkehrsablaufs auf einer Strecke mit 2+1-Verkehrsführung abgestimmt. Die Kalibrierung des Modells erfolgte auf Basis von Erkenntnissen lokaler Messungen (insbesondere Zeitlücken und Geschwindigkeitsverteilungen). Im Rahmen der Validierung erfolgte ein Abgleich zwischen den Ergebnissen der Messungen mit den mit LASI2+1 simulierten für jede einzelne nachgebildete Untersuchungsstrecke anhand der Parameter q und v. Mit LASI2+1 wurden zahlreiche Simulationsläufe durchgeführt, bei denen eine Vielzahl von Kombinationen der Streckenparameter sowie der Verkehrszusammensetzung bei einem möglichst breiten Spektrum von Verkehrsbelastungen betrachtet wurden. Die Ergebnisse lagen zunächst in „Punktwolken“ vor, wobei jeweils ein Punkt beschrieben wird durch eine in einem 5-Minuten-Intervall gültige Verkehrsstärke q und der zu diesem Intervall gehörigen mittleren Reisegeschwindigkeit der Pkw v. Zur Darstellung der den Verkehrsablauf beschreibenden Punktwolken wurden verschiedene makroskopische Modelle getestet. Dabei wurden ein- und zweistreifige Abschnitte getrennt voneinander betrachtet. Nach Anwendung mathematischer Verfahren zur Kurvenanpassung ergaben für die einstreifigen Abschnitte Wurzelfunktionen die besten Näherungen zur Beschreibung der Zusammenhänge zwischen q und v. Für die leicht konvexen Ausprägungen in den q-v-Punktwolken der zweistreifigen Abschnitte lieferten lineare Funktionen, die über Verkehrsdichte (k)-Geschwindigkeits-Relationen hergeleitet wurden, die besten Ergebnisse. Mit Hilfe von varianzanalytischen Berechnungen konnten außerdem die Einflüsse der verschiedenen Trassierungsparameter quantifiziert werden. Längsneigung und Schwerverkehrsanteile wurden direkt in den insgesamt zehn q-v-Diagrammen dargestellt. Einflüsse durch die Längen der Teilabschnitte bzw. die Anzahl der Abschnitte wurden über Abminderungen bzw. Erhöhungen der Pkw-Reisegeschwindigkeiten berücksichtigt. Daraus wurden in einem weiteren Schritt Korrekturfaktoren ermittelt. Für den konkreten Fall eines planfreien Knotenpunkttyps im so genannten unkritischen Wechselbereich wurden weitere Einflüsse auf die Pkw-Reisegeschwindigkeit ermittelt, die die Auswirkungen der sich im Knotenpunkt ändernden Verkehrsstärke (nämlich deutlich geringere Geschwindigkeiten gegenüber dem durchgehenden Fahrstreifen) berücksichtigen. Durch die Ergebnisse dieser Arbeit liegen erstmals abgesicherte q-v-Diagramme für freie Strecken mit 2+1-Verkehrsführung einschließlich planfreier Knotenpunkte in unkritischen Wechselbereichen vor, die einen Diskussionsbeitrag für eine Aufnahme in Fortschreibungen der derzeit gültigen Regelwerke darstellen.
Die europäische Gegenwartsarchitektur, die sich exemplarisch etwa in Arbeiten von Herzog & deMeuron, Adolf Krischanitz oder Rem Kohlhaas manifestiert, verbindet eine Beziehung zum Gewöhnlichen, Alltäglichen, Banalen. Diese Beziehung ist unklar und problematisch, da üblicherweise Architektur auf der einen Seite und Banalität auf der anderen Seite einander ausschliessende Begriffspaare bezeichnen. Diese Hinwendung der Architektur zum Gewöhnlichen entwickelt sich historisch als ein Modell, welches Gewöhnlichkeit als ethisches Prinzip etabliert, das unabdingbar mit der Entwicklung der Kultur verbunden ist. Besonders im zwanzigsten Jahrhundert werden solcherart einflußreiche Alternativen zu einer Architektur des Besten, Größten und Schönsten vorgestellt. Der Regelfall für die Beurteilung der Beziehungen zwischen Architektur und Banalität ist allerdings die Kritik der Banalität. Hier gibt es zwei hauptsächliche Kritikmuster, nämlich die Kritik von Banalität als Bedeutungslosigkeit und die Kritik der Banalität als Wertlosigkeit. Problematisch ist eine Kritik der Banalität dann, wenn sie objektorientiert argumentiert, anstatt Interpretationsmodelle zu untersuchen, da in Gegenständen keine Bedeutungen liegen, sondern nur Unterschiede, die es dem Betrachter möglich machen, ihnen Bedeutung zuzuschreiben. Genauso wie eine objektorientierte Kritik an Banalität nicht zielführend sein kann, so sind auch Versuche, eine Ästhetik des Banalen zu begründen, fragwürdig. Ein Kunstwerk oder auch Architektur definiert sich nicht über seine Neutralität, sondern über seine Differenz zum Alltäglichen, Gewöhnlichen, Banalen. Eine Wechselwirkung zwischen Architektur und Banalität ist also nur über die Effekte des Gewöhnlichen untersuchbar, da das Gewöhnliche selbst uninterpretiert und unsichtbar bleiben muß. Entscheidend ist letztlich die Frage, auf welche Art Architektur Banalität für ihre Transformationen benützt. Ein Erklärungsmodell ist der Kantsche Begriff des Parergon, der zeigt, wie sich Architektur durch Ränder, das Sekundäre, das Gewöhnliche konstituiert. Das Parergon ist dabei subversiv und sinister, weil es die herkömmliche Einheit der Architektur zerstört. Letztlich also ist die Annäherung der zeitgenössischen Architektur an die Banalität eine subversive Differenzierungsstrategie, mit der durch scheinbare Nähe größtmögliche Distanzierung erreicht wird.
Zur Kontaktsituation zwischen mineralischen Basiserdstoffen und geosynthetischen Filterelementen
(1998)
Die Arbeit beschäftigt sich mit der komplexen Aufgabe Stadtstrukturen mit einem Simulationsmodell im Rechner erzeugen zu können. Dafür wird ein Vierebenenmodell als Untermodellebene eingeführt, um mit allgemeinen Informationen, Parzellierung, Gebäuden und Optimierung der Struktur arbeiten zu können.
Die Arbeit befaßt sich mit varianzmindernden Verfahren zur Monte Carlo Simulation von stochastischen Prozessen, zum Zweck der Zuverlässigkeitsbeurteilung von Baukonstruktionen mit nichtlinearem Systemverhalten. Kap. 2 ist eine Literaturstudie zu varianzmindernden Monte Carlo Methoden. In Kap. 3 wird die Spektrale Darstellung eines stationären, skalaren Gauß - Prozesses hergeleitet. Auf dieser Grundlage werden verschiedene Simulationsmodelle diskutiert. Das in Kap. 4 entwickelte varianzmindernde Simulationsverfahren basiert auf der Spektralen Darstellung. Nach einer ersten Pilotsimulation werden die Frequenzen für die Einführung zufälliger Amplituden bestimmt und deren Parameter angepaßt. Der zweite Lauf erfolgt mit diesen Parametern nach dem Prinzip des Importance Sampling. Das Verfahren wird in Kap. 5 für eine Brücke unter Erdbebenbelastung angewendet. Die Brücke ist mit sog. Hysteretic Devices zur Energiedissipation ausgerüstet. Es werden einerseits die Genauigkeit und Effizienz des Simulationsverfahrens, andererseits die Leistungsfähigkeit der Hysteretic Devices zur Erdbebenertüchtigung von Bauwerken demonstriert.
Modern immersive telepresence systems enable people at different locations to meet in virtual environments using realistic three-dimensional representations of their bodies. For the realization of such a three-dimensional version of a video conferencing system, each user is continuously recorded in 3D. These 3D recordings are exchanged over the network between remote sites. At each site, the remote recordings of the users, referred to as 3D video avatars, are seamlessly integrated into a shared virtual scenery and displayed in stereoscopic 3D for each user from his or her perspective.
This thesis reports on algorithmic and technical contributions to modern immersive telepresence systems and presents the design, implementation and evaluation of the first immersive group-to-group telepresence system in which each user is represented as realistic life-size 3D video avatar. The system enabled two remote user groups to meet and collaborate in a consistent shared virtual environment. The system relied on novel methods for the precise calibration and registration of color- and depth- sensors (RGBD) into the coordinate system of the application as well as an advanced distributed processing pipeline that reconstructs realistic 3D video avatars in real-time. During the course of this thesis, the calibration of 3D capturing systems was greatly improved. While the first development focused on precisely calibrating individual RGBD-sensors, the second stage presents a new method for calibrating and registering multiple color and depth sensors at a very high precision throughout a large 3D capturing volume. This method was further refined by a novel automatic optimization process that significantly speeds up the manual operation and yields similarly high accuracy. A core benefit of the new calibration method is its high runtime efficiency by directly mapping from raw depth sensor measurements into an application coordinate system and to the coordinates of its associated color sensor. As a result, the calibration method is an efficient solution in terms of precision and applicability in virtual reality and immersive telepresence applications. In addition to the core contributions, the results of two case studies which address 3D reconstruction and data streaming lead to the final conclusion of this thesis and to directions of future work in the rapidly advancing field of immersive telepresence research.
Die Dissertation erschließt der deutschen Forschung die derzeit weltweit vergebenen nationalen Umweltzeichen. Dabei steht nicht der politische Kontext, sondern die gestalterisch-formale und inhaltliche Standortbestimmung, Analyse und Interpretation der Zeichenfamilie im Vordergrund. Teil I der Arbeit unterwirft den Untersuchungsgegenstand einer semiotischen Analyse nach Umberto Eco und diskutiert die Umweltzeichen im Kontext von graphischen Zeichen, Markenzeichen, Piktogrammen und Emblemen. Ein kurzer Abriss der Geschichte von Natur- und Welt-, d.h. Globusdarstellungen lotet den Bildervorrat aus, auf den zur Darstellung von 'Umwelt' zurückgegriffen werden kann. Das Umweltzeichen-Design, so zeigt sich, arbeitet mit den rhetorischen Figuren des pars pro toto bzw. des totum pro parte, um die kulturelle Einheit von /Umwelt/ und /Umweltschutz/ graphisch zu fassen. Teil II, der Hauptteil der Arbeit, besteht aus der ikonographischen Analyse und ikonologischen Interpretation aller nationalen Umweltzeichen gemäß Theorie und Methode von Aby Warburg und Erwin Panofsky. In 30 Kapiteln werden für jedes Zeichen Informationen zu Design und Designer/in, Entstehungsjahr, Abbildungsvorschriften und Intentionen der Vergabeinstitutionen zusammengestellt und die Vor-Bilder und Hintergründe zu einer ikonographisch-ikonologischen Deutung zusammengetragen. Insbesondere für die in der Arbeit detaillierter analysierten Zeichen aus Deutschland, Japan, Kanada, den USA, Österreich und Skandinavien ermöglicht die Untersuchung tiefe Einsichten in die Kulturgeschichte des jeweiligen Vergabelandes. Erkenntnisinteresse der Arbeit ist für jedes einzelne Zeichen die Entschlüsselung des (inter)kulturellen Bildgedächtnisses zum Thema /Umweltschutz/ vor dem Hintergrund der Herkunftskultur und ihrer nationalen Mythen. Farbgebung und Zeichenbildungsstrategien zeigen beim Untersuchungsgegenstand den Verzicht auf Signalement und Originalität. Neue nationale Umweltzeichen werden mehr und mehr aus dem Bildervorrat bestehender Umweltzeichen geschaffen. Die synchrone Vernetzung der Zeichen tritt gegenüber der diachronen Verankerung im Bildervorrat der Herkunftskultur immer stärker in den Vordergrund. Obwohl international einheitliche Gestaltungsrichtlinien fehlen, entsteht so eine globale Zeichentradition. Angesichts insbesondere des Designs und Re-Designs asiatischer Zeichen drängt sich abschließend die Frage auf, ob die eigentliche Zielgruppe der nationalen Umweltzeichen noch der einheimische Konsument ist oder ob – insbesondere in den Schwellenländern – die nationalen Umweltzeichenprogramme zum außenpolitischen Instrumentarium geworden sind, mit dem man sich in der Staatengemeinschaft positioniert.
Der Planungsprozess im Konstruktiven Ingenieurbau ist gekennzeichnet durch drei sich zyklisch wiederholende Phasen: die Phase der Aufgabenverteilung, die Phase der parallelen Bearbeitung mit entsprechenden Abstimmungen und die Phase der Zusammenführung der Ergebnisse. Die verfügbare Planungssoftware unterstützt überwiegend nur die Bearbeitung in der zweiten Phase und den Austausch der Datenbestände durch Dokumente. Gegenstand der Arbeit ist die Entwicklung einer Systemarchitektur, die in ihrem Grundsatz alle Phasen der verteilten Bearbeitung und unterschiedliche Arten der Kooperation (asynchron, parallel, wechselseitig) berücksichtigt und bestehende Anwendungen integriert. Das gemeinsame Arbeitsmaterial der Beteiligten wird nicht als Dokumentmenge, sondern als Menge von Objekt- und Elementversionen und deren Beziehungen abstrahiert. Elemente erweitern Objekte um applikationsunabhängige Eigenschaften (Features). Für die Bearbeitung einer Aufgabe werden Teilmengen auf Basis der Features gebildet, für deren Elemente neue Versionen abgeleitet und in einen privaten Arbeitsbereich geladen werden. Die Bearbeitung wird auf Operationen zurückgeführt, mit denen das gemeinsame Arbeitsmaterial konsistent zu halten ist. Die Systemarchitektur wird formal mit Mitteln der Mathematik beschrieben, verfügbare Technologie beschrieben und deren Einsatz in einem Umsetzungskonzept dargestellt. Das Umsetzungskonzept wird pilothaft implementiert. Dies erfolgt in der Umgebung des Internet in der Sprache Java unter Verwendung eines Versionsverwaltungswerkzeuges und relationalen Datenbanken.
SEEING HISTORY - THE AUGMENTED ARCHIVE erforscht – in Theorie und Praxis – die Medialitäten des Archivs in Zeiten des Übergangs vom Speichermedium hin zum Modus des Übertragens. Am Beispiel Ägyptens seit den politischen Umwälzungen 2011 wird ein neues Archivsystem entwickelt, das mit Hilfe von Augmented Reality Technologie - d.h. der virtuellen Erweiterung des Realraums von mobiler Videotechnik durch Metainformationen - das umfassendste bestehende Videoarchiv zur ägyptischen Revolution im Stadtraum Kairos per GPS-Kodierung zur Verfügung stellt.
Vor dem Hintergrund des gesellschaftlichen Wandels sieht sich die Verkehrsforschung mit neuen Anforderungen an die Konzeption, Anpassung, Anwendung usw. von statistischen Ansätzen zur Analyse des Aktivitäten-(Verkehrs-)verhaltens konfrontiert, um auf Basis empirischer Daten adäquat Zusammenhänge der Verkehrsentstehung zu erforschen. Ausgehend von der musterorientierten Perspektive - das heißt Untersuchungsgegenstand sind chronologische Abfolgen von Ortsveränderungen und Tätigkeiten in Form von Wege-Aktivitätenmustern - besteht das Ziel einer möglichst realitätsnahen Abbildung und Erklärung von individuellen Unterschieden im Raum-Zeit-Verhalten. Neu bzw. kaum etabliert sind in diesem Kontext der eigens konzipierte Multimethodenansatz sowie die Optimal Matching Technik, die erweiterte Abbildungseigenschaften zur Distanzmessung zwischen Wege-Aktivitätenmustern aufweist. Erkannt werden durch jene Methode gleiche Tätigkeiten bzw. Ortsveränderungen, die zeitlich an unterschiedlichen Stellen der zu vergleichenden Muster angeordnet sind sowie identische Subsequenzen. Zielführend in der Datenanalyse ist nachstehende Abfolge von Verfahren: Die Klassifikation von Wege-Aktivitätenmustern zur Reduktionen deren immenser Komplexität gelingt durch Einsatz der Optimal Matching Technik. Diese quantifiziert (Un-)ähnlichkeiten zwischen Wege-Aktivitätenmustern („Abstandsmessung“) unterschiedlicher Personen oder zu vergleichender Zeitabschnitte einer Person. Die dadurch berechnete Distanzmatrix bildet den Ausgangspunkt des clusteranalytischen Fusions-algorithmus, dessen Aufgabe die Zusammenfassung der Wege-Aktivitätenmuster ist (explorative Stufe). Die Anwendung eines multinomialen Logit-Modells ermöglicht auf Individualebene die Vorhersage der Affinität zu Wege-Aktivitätenmuster-Typen anhand von Merkmalswerten identifizierter Erklärungsgrößen der Personen, des Haushaltes usw. (induktive Stufe). Im Gegensatz zu einschlägigen Forschungsarbeiten zeichnet sich die gewählte Untersuchungsstrategie durch die Objektivität des Vorgehens aus, da eine a-priori Bildung von Personen-kategorien nicht notwendig ist. Ebenso grenzt die Berücksichtigung der zufälligen und nicht-erklärbaren Verhaltensvariabilität durch das Wahrscheinlichkeitsprinzip des gewählten Logit-Modells das eigene Vorgehen von anderen Untersuchungen ab. Aufgrund der weitgehend ungeklärten Anwendungsgrundlagen der Optimal Matching Technik befasst sich die vorliegende Arbeit zunächst mit dessen inhaltlicher Ausrichtung am Untersuchungsgegenstand. Die Anpassung der festzulegenden Aufwandswerte, welche für die benötigten Aktionen angesetzt werden, um ein Wege-Aktivitätenmuster in ein anderes zu transformieren, erfolgt mit Hilfe einer empirisch Abschätzung, die weit über ein argumentatives Vorgehen hinausgeht. Der ermittelte Sequenzabstand inkludiert dabei die operationsspezifische Distanz bei Übergängen zwischen den konstituierenden Zuständen der zu vergleichenden Wege-Aktivitätenmuster („Zustandsähnlichkeit“). Abstandsmaß für die qualitativen Zustände ist dabei die ermittelte Priorität von wege- und tätigkeitenbezogenen Handlungen. Die Relevanz einer Ausrichtung belegt auch die durchgeführte Sensitivitätsanalyse: Das Ausmaß der Empfindlichkeit der Optimal Matching Technik ist insbesondere gegenüber der Festlegung der Aufwandswerte beträchtlich. Um die Analysepotenziale des Multimethodenansatzes zu demonstrieren, werden exemplarisch interpersonelle Unterschiede im wöchentlichen Aktivitäten-(Verkehrs-)verhaltens (Datenbasis: deutsches Mobilitätspanel) analysiert. Ergebnis der Klassifikation (explorative Analysestufe) ist eine auf den ersten Blick inhaltlich stichhaltige Wege-Aktivitätenmuster-Typologie charakteristischer Wochenabläufe des Aktivitäten-(Verkehrs-)verhaltens: Unterschiedliche Arten, zeitlicher Umfang und zeitliche Lage der Haupt-aktivitäten, unterschiedliche Verkehrsverhaltensweisen sowie unterschiedliche clusterspezifische Tag zu Tag Rhythmen, Gleichförmigkeiten, Schwankungen usw. des Raum-Zeit-Verhaltens kennzeichnen die Wege-Aktivitätenmuster-Typen. Die Abbildungs-eigenschaften der Optimal-Matching Technik zeichnen sich in den erstellten Clustern nur teilweise ab: Während die Zustandselementkomposition - augenscheinlich betrachtet - passabel durch die Wege-Aktivitätenmuster-Typologie abgebildet wird, bleibt ungewiss, ob und inwieweit dies für die Abfolgeähnlichkeit gilt. Aus dem induktiven Analyseschritt geht hervor: Alter, Geschlecht, Verfügbarkeit einer ÖPNV-Zeitkarte, Führerscheinbesitz und mit herausragender Bedeutung der Erwerbsstatus signalisieren als maßgebende Erklärungsgrößen eine Trennwirkung. Überdies zeigt das Gesamtbild der ermittelten Wirkungsrichtungen und Effektstärken überzeugende Erklärungszusammenhänge auf. Damit ist ein Nachweis der Praktikabilität des eigens konzipierten Multimethodenansatzes unter Verwendung der Optimal Matching Technik zur musterorientierten Analyse des Raum-Zeit-Verhaltens erbracht.
Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia
(2021)
This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that.
However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes.
Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings.
By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors’ as an opportunity for corruption.
In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects’ value chain. These propositions are made in reliance on BIM’s present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM’s synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies.
Zwischen den Jahren 1920 und 1930 kam es an der kalifornischen Küste zu Bauschäden an Brücken und Fahrbahnen, die sich vor allem in einer deutlichen Rissbildung äußerten. Seither werden immer wieder Bauschäden beschrieben, deren Ursache in der Reaktion von Zuschlägen, die „reaktive“ Kieselsäure enthalten, mit der Porenlösung des Betons zu sehen ist. Diese Reaktion wird als Alkali-Kieselsäure Reaktion (AKR) bezeichnet. Seit der ersten Veröffentlichung von Stanton über die „alkali-aggregate reaction“ an opalhaltigen Zuschlägen sind hunderte von Forschungsarbeiten zu diesem Thema durchgeführt und deren Ergebnisse veröffentlicht worden. Trotz eingehender Forschung seit mehr als 8o Jahren ist weder der Mechanismus der AKR vollständig geklärt noch eine eindeutige Voraussage über die Gefährdung von Bauwerken oder Bauteilen mit potentiell AKR-empfindlichen Zuschlägen möglich. Das liegt vor allen Dingen daran, das es sich bei der AKR um eine Reaktion handelt, die aus einer komplexen Abfolge chemischer und physikalischer Prozesse besteht, die in ihrer Gesamtheit zu einer Schädigung von Beton bzw. Betonbauteilen und Bauwerken führen können. Eine geschlossene Beschreibung und Behandlung dieser Reaktion ist nicht möglich, solange keine befriedigende Kenntnis über den Ablauf der einzelnen Schritte vorliegt. Dazu bedarf es grundsätzlicher Untersuchungen der einzelnen chemischen und physikalischen Reaktionsschritte sowie einer möglichst quantitativen Bewertung der verschiedenen Einflussfaktoren. Grundsätzlich gibt es weltweit eine ganze Reihe von Richtlinien und Normen , die dazu verhelfen sollen, Schädigungen an Bauwerken durch AKR zu verhindern. In Deutschland ist das momentan gültige Regelwerk die sogenannte Alkali-Richtlinie des deutschen Ausschusses für Stahlbeton (DAfStb). Sie dient zur Beurteilung von Zuschlag nach DIN 4226 [6, 7, 8] mit alkaliempfindlichen Bestandteilen. Dabei bezieht sich der Teil 2 der Richtlinie auf Zuschläge mit Opalsandstein, Kieselkreide und Flint aus bestimmten Gewinnungsgebieten. Hier wird eine reine Zuschlagprüfung gefordert. Teil 3 der Richtlinie bezieht sich auf präkambrische Grauwacken und andere alkaliempfindliche Gesteine. Gefordert werden hier Prüfungen der Zuschläge selbst sowie Prüfung an Betonbalken und 30er Würfeln in der Nebelkammer. Für die meisten in der Richtlinie genannten Zuschläge bilden die Prüfungen und Vorschriften eine ausreichende Sicherheit, um eine AKR zu vermeiden. Dennoch treten immer wieder Schäden mit Zuschlägen auf, die nach der Alkali-Richtlinie als unempfindlich eingestuft werden müssten. Dabei handelt es sich in der Regel um Schadensfälle, die erst nach mehreren Jahren mit spät reagierenden AKR-empfindlichen Zuschlägen auftreten. Zu diesen Zuschlägen, die gegebenenfalls speziell im Nebelkammertest innerhalb von neun Monaten keine signifikante Dehnung (<0,6mm/m) aufweisen, gehören Stressquarze, Kieselkalk, Granit, Porphyr, Kieselschiefer und Grauwacke. Die vorliegende Arbeit dient speziell der Beurteilung und Einordnung von unterschiedlichen kristallinen Quarzmodifikationen sowie der Ermittlung geeigneter Untersuchungsmethoden für die Beurteilung der AKR-Empfindlichkeit von Quarz.
In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible.
Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution.
Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance.
Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis.
Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements.
Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction.
For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem.
Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field.
From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element.
As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section.
Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.
This dissertation investigates the interactions between urban form, allocation of activities, and pedestrian movement in the context of urban planning. The ability to assess the long-term impact of urban planning decisions on what people do and how they get there is of central importance, with various disciplines addressing this topic. This study focuses on approaches proposed by urban morphologists, urban economists, and transportation planners, each aiming the attention at a different part of the form-activity-movement interaction. Even though there is no doubt about the advantages of these highly focused approaches, it remains unclear what is the cost of ignoring the effect of some interactions while considering others. The general aim of this dissertation is to empirically test the validity of the individual models and quantify the impact of this isolationist approach on their precision and bias.
For this purpose, we propose a joined form-activity-movement interaction model and conduct an empirical study in Weimar, Germany. We estimate how the urban form and activities affect movement as well as how movement and urban form affect activities. By estimating these effects in isolation and simultaneously, we assess the bias of the individual models.
On the one hand, the empirical study results confirm the significance of all interactions suggested by the individual models. On the other hand, we were able to show that when these interactions are estimated in isolation, the resulting predictions are biased. To conclude, we do not question the knowledge brought by transportation planners, urban morphologists, and urban economists. However, we argue that it might be of little use on its own.
We see the relevance of this study as being twofold. On the one hand, we proposed a novel methodological framework for the simultaneous estimation of the form-activity-movement interactions. On the other hand, we provide empirical evidence about the strengths and limitations of current approaches.
Das Ziel der Arbeit besteht in der Entwicklung von Konzepten zur effizienten Implementierung von ingenieurgemäßer Tragwerksplanungs-Software. Der vorgeschlagene Lösungsansatz basiert auf einer optimalen Anpassung der Nutzeroberfläche an den spezifischen Arbeitsablauf, der Erhöhung des Wiederverwendungsgrades sowie der Möglichkeit der unabhängigen Erweiterbarkeit von Software-Systemen. Verbunddokumente werden als Nutzeroberfläche und Software-Architektur benutzt, um eine Zusammenführung von Standard-Software und fachspezifischen Software-Komponenten zu ingenieurgemäßer Tragwerksplanungs-Software zu ermöglichen. Die Umsetzbarkeit des Konzeptes wird durch eine Pilotimplementierung verifiziert.
Die elektronische Virtualisierung von Baudenkmalen ist neues, außergewöhnlich vielfältiges medientechnisches Phänomen; es beschreibt die ursprüngliche Form substanziell-realer Baudenkmale, transformiert sie von einer abstrakten Beschreibung in Wort und Bild in eine immaterielle Realität. Die Dissertation versucht Antworten zu geben auf folgende Fragen: Ist die elektronische Virtualisierung eine Methode der Stimulation der Öffentlichkeit im Umgang mit Baudenkmalen? Ist das elektronisch virtualisierte Baudenkmal ein immaterielles Zeugnis der Kulturgeschichte in der Zukunft? Ist das substanziell-reale und das virtualisierte Baudenkmal uneingeschränkt gegenseitig austauschbar, ist ersteres durch letzteres ersetzbar? Die Beantwortung der Fragen hängt ab von den Stufen der Perfektion der elektronischen Virtualsierung von Baudenkmalen.
Das im Jahre 2003 verabschiedete und 2006 in Kraft getretene UNESCO-Übereinkommen zur Bewahrung des immateriellen Kulturerbes erweitert das Kulturverständnis von gebautem Kulturerbe gemäß der Konvention aus dem Jahre 1972 durch gelebtes Kulturerbe. Die Dissertation zeigt beispielhaft, wie sich Bürger einer Stadt und einer Region mit ihrer historischen Vergangenheit befassen und dass es lohnenswert ist, sich mit ihrem ererbten immateriellen Kulturerbe auseinander zu setzen. Sie bezeugt, dass eine moderne populäre Kultur die Pflege des immateriellen Kulturerbes voranbringt, dass personalisierte und vergesellschaftete Individuen die Sorge um den drohenden Kulturverlust ernst nehmen und diesem aktiv, eigenständig und unpolitisch entgegen treten. Ausgehend von der wertphilosophischen und kulturtheoretischen Annäherung werden im zweiten und dritten Kapitel beispielhaft die Ur-Inszenierung im Jahre 1475 und die Re-Inszenierung im 21. Jahrhundert gegenübergestellt. Die Ergebnisse aus der Untersuchung werden im vierten Kapitel diskutiert. An Hand der Promotionsschrift wird versucht, Antworten auf folgende Fragen zu finden: - Hat die Re-Inszenierung der „Landshuter Fürstenhochzeit 1475“ des 21. Jahrhunderts das Potential eines immateriellen Kulturerbes? - Kann sie den negativen Begleiterscheinungen des Generations- wechsels und der Globalisierung entgegentreten? - Ist sie eine zeitgenössische Transformationsmethode von (Denkmal)Werten? - Was sind die Schutzkomponenten? - Trägt die Re-Inszenierung zu der kulturellen Identität einer Stadt an authentischem Ort bei und hat sie Einfluss auf die Gestaltung der baulich-räumlichen Umwelt?
Heutige Methoden zur Soll-Spezifikation von Bauleistungen (Kostenermittlung und zeitliche Ablaufplanung) gehen von einer abstrahierten und vereinfachten Betrachtung der Zusammenhänge bei Bauprojekten aus. Leistungsverzeichnisse, Kostenermittlungen und Bauzeitpläne orientieren sich nur indirekt an der Geometrie des Bauwerks und der Baustelle. Die dabei verwendeten Medien wie Papier, 2D-Dateien, digitale Leistungsbeschreibungen oder 3D-Darstellungen lassen die Suche nach Informationen auf der Baustelle zu einem zeitaufwändigen und in Anbetracht existierender Medientechnologien ineffizienten Prozess werden. Interaktive virtuelle Umgebungen erlauben die Auflösung starrer Zusammenhänge durch interaktive Eingriffe des Anwenders und visualisieren komplexe bauproduktionstechnische Vorgänge. Das Konzept der visuellen interaktiven Simulation der Bauproduktion sieht vor, die Soll-Spezifikation anhand eines interaktiven 3D-Modells zu entwickeln, um räumliche Veränderungen und parallele Prozesse auf der virtuellen Baustelle im Rahmen der Entscheidungsfindung zum Bauablauf besser berücksichtigen zu können. Verlangt man einen hohen Grad an Interaktivität mit dem 3D-Modell, dann bieten sich Computerspieltechnologien sehr gut zu Verifikationszwecken an. Die visuelle interaktive Simulation der Bauproduktion ist damit als eine 3D-modellbasierte Methode der Prozessmodellierung zu verstehen, die Entscheidungen als Input benötigt und die Kostenermittlung sowie die zeitliche Ablaufplanung als Output liefert.
Córdoba es la segunda ciudad más poblada de la Argentina, y posee el ejido municipal más extenso del país, siendo un importante centro industrial y de servicios del centro del país. Es además la cabecera de la segunda región metropolitana argentina, el Área Metropolitana de Córdoba (AMCBA). Si bien el desarrollo de sus áreas centrales y periurbanas es un tema bastante desarrollado académicamente, actualmente hay un vacío de conocimiento en la situación actual de las áreas pericentrales e intermedias de esta ciudad -aun cuando ocupan más del 30% del área urbanizada y donde habita la mayor parte de su población-. Es en estas áreas donde se ubica el objeto de estudio de esta tesis: los barrios pericentrales que forman un anillo alrededor del área central. Originados como extensiones suburbanas alrededor de 1940, y consolidados como barrios residenciales de clase media y media alta de baja densidad antes de 1970, ocupan lo que son hoy algunas de las áreas con mejor calidad ambiental y urbana de la ciudad.
Los barrios pericentrales son considerados generalmente consolidados y estables; sin embargo, analizados en detalle, muestran complejas transformaciones: un vaciamiento poblacional constante, a pesar del crecimiento demográfico en general de Córdoba y el AMCBA; aumento de inmuebles abandonados; y a diferencia de sectores en una similar posición, no son objeto de grandes inversiones inmobiliarias de renovación urbana.
Esta situación es invisibilizada, en parte por ser resultado de procesos con poco impacto relativo en la ciudad, y en parte porque estos procesos no están contemplados por los modelos urbanos locales vigentes –basados en la teoría racionalista y determinista de principios del siglo XX-, que conceptualizan a los barrios pericentrales como una “panacea urbana”. Esta tesis puso en disputa estos modelos, partiendo de la discusión sobre un fenómeno informal detectado indefectiblemente (aunque no exclusivamente) en estos barrios pericentrales: la microdensificación emergente.
La imposibilidad de colocar los inmuebles existentes en el mercado hace que los propietarios busquen nuevas formas de valorizar sus propiedades, de facilitar el acceso a la vivienda a sus hijos o de invertir sus ahorros de forma segura, obteniendo una fuente adicional de ingresos: en cada parcela edificada se aumenta la cantidad de unidades funcionales, aprovechando la superficie construible vacante o refuncionalizando las construcciones obsoletas, aunque manteniendo el grano y la escala de intervención respecto al tejido existente. La oferta de hábitat en estos barrios se diversifica, y no sólo evita la expulsión de población, sino que también atrae a nuevos habitantes. Además, en un tejido originalmente sólo residencial, incorpora actividades de comercio y servicios que enriquecen el tejido funcional.
El proceso se realiza sin planificación general (y por supuesto fuera del marco legal): es la suma de acciones individuales que se reconstruyen como una “tendencia” o “patrón emergente”, revitalizando el tejido urbano de forma sutil pero definitiva.
Se planteó como hipótesis que la microdensificación emergente es un proceso de revitalización que aprovecha el potencial del tejido de estos barrios de forma más sostenible y eficiente que el modelo impuesto formalmente.
10
La tesis se encuadró bajo el enfoque sistémico de la complejidad. Este enfoque entiende a la ciudad como un sistema complejo y dinámico, en desarrollo constante; determinado más por las interrelaciones entre sus componentes y entre esos componentes y el contexto, que por las condiciones de cada elemento individualmente. La calidad y cantidad de estas interacciones es primordial, al punto de definir la condición urbana de una aglomeración. Según estas premisas, un sistema urbano sostenible y eficiente será aquel que, maximizando recursos materiales y humanos (y de acuerdo a la capacidad de carga del sistema) desarrolle de redes de intercambio múltiples, diversas y descentralizadas, que generen procesos de sinergia y desarrollo inclusivos.
La investigación se estructuró entonces de forma tal de responder las siguientes preguntas:
•
En primer lugar, ¿cuáles son las condiciones específicas que catalizan la microdensificación en los barrios pericentrales de Córdoba?
•
Siendo la microdensificación una respuesta a una situación particular dentro del sistema urbano, ¿Cuál es el grado de sostenibilidad y eficiencia que aporta a los barrios pericentrales (en particular) y a Córdoba (en general)?
•
Y tras haber identificado su impacto en la estructura urbana, su potencial transformador y organizativo, ¿puede el estudio de los procesos emergentes hacer un aporte conceptual e instrumental a los modelos locales de planeamiento urbano?
Primeramente, un análisis documental reconstruyó la condición específica de los barrios pericentrales, y el escenario actual de Córdoba con respecto a la producción y acceso al hábitat urbano. Luego se infirió un escenario tendencial a corto y mediano plazo, que sirvió para definir distintos patrones de territorialización, incluyendo el patrón “formal” de los barrios pericentrales. Se continuó con el análisis específico de la microdensificación, proponiendo un escenario posible a mediano plazo donde el patrón de microdensificación ha sido plenamente desarrollado, transformando cuali y cuantitativamente el tejido espacio-funcional y socioeconómico.
A partir de estos resultados, se realizó un análisis comparativo de los distintos patrones de desarrollo urbano de Córdoba en cuanto a su sostenibilidad y eficiencia. Se demostró que el patrón de microdensificación en los barrios pericentrales es mucho más sostenible y eficiente que los patrones formales existentes, y se abrió la discusión que se desarrolla en la última parte de esta tesis:
El argumento desarrollado en esta investigación y los resultados que de él se desprenden tienen un carácter analítico y explicativo útil para el análisis de otros escenarios en el contexto urbano argentino y latinoamericano. En primer lugar, sobre preferir la revitalización progresiva frente a la renovación total o la creación de nuevo suelo urbano en la periferia; promover una ciudad compacta, diversa e inclusiva tanto social como funcionalmente; basada en la multiplicación y diversificación de los agentes productores de ciudad; que considera estos procesos, así como los mecanismos de empoderamiento, participación y gobernanza como instrumentos para lograr mayor sostenibilidad y eficiencia en el desarrollo urbano. Por otro lado, esta tesis puso en relevancia el rol de los procesos emergentes en un sistema urbano como mecanismo vital para generar esta revitalización. Finalmente, se discute el aporte del enfoque sistémico para comprender, explicar y proponer intervenciones a la disciplina.
Die Behandlung von geometrischen Singularitäten bei der Lösung von Randwertaufgaben der Elastostatik stellt erhöhte Anforderungen an die mathematische Modellierung des Randwertproblems und erfordert für eine effiziente Auswertung speziell angepasste Berechnungsverfahren. Diese Arbeit beschäftigt sich mit der systematischen Verallgemeinerung der Methode der komplexen Spannungsfunktionen auf den Raum, wobei der Schwerpunkt in erster Linie auf der Begründung des mathematischen Verfahrens unter besonderer Berücksichtigung der praktischen Anwendbarkeit liegt. Den theoretischen Rahmen hierfür bildet die Theorie quaternionenwertiger Funktionen. Dementsprechend wird die Klasse der monogenen Funktionen als Grundlage verwendet, um im ersten Teil der Arbeit ein räumliches Analogon zum Darstellungssatz von Goursat zu beweisen und verallgemeinerte Kolosov-Muskhelishvili Formeln zu konstruieren. Im Hinblick auf die vielfältigen Anwendungsbereiche der Methode beschäftigt sich der zweite Teil der Arbeit mit der lokalen und globalen Approximation von monogenen Funktionen. Hierzu werden vollständige Orthogonalsysteme monogener Kugelfunktionen konstruiert, infolge dessen neuartige Darstellungen der kanonischen Reihenentwicklungen (Taylor, Fourier, Laurent) definiert werden. In Analogie zu den komplexen Potenz- und Laurentreihen auf der Grundlage der holomorphen z-Potenzen werden durch diese monogenen Orthogonalreihen alle wesentlichen Eigenschaften bezüglich der hyperkomplexen Ableitung und der monogenen Stammfunktion verallgemeinert. Anhand repräsentativer Beispiele werden die qualitativen und numerischen Eigenschaften der entwickelten funktionentheoretischen Verfahren abschließend evaluiert. In diesem Kontext werden ferner einige weiterführende Anwendungsbereiche im Rahmen der räumlichen Funktionentheorie betrachtet, welche die speziellen Struktureigenschaften der monogenen Potenz- und Laurentreihenentwicklungen benötigen.
Knapp 30.000 Windenergieanlagen zwischen Nordsee und Alpen lassen unübersehbar erkennen, dass sich unser Energiesystem in einer umfassenden Transformation befindet. Allenthalben erfährt diese Entwicklung eine breite und kontroverse Rezeption und auch in der Denkmalpflege werden Windenergieanlagen aufgrund ihrer mitunter erheblichen Auswirkungen auf die Landschaft noch überwiegend als Störung wahrgenommen. Diese Arbeit nimmt dagegen die historische Entwicklung in den Blick und plädiert dafür, Windenergieanlagen als bedeutendes Kulturerbe zu verstehen. Angesichts des Voranschreitens der Energiewende wird angenommen, dass gerade älteren Modellen als baulichen Zeugnissen umfangreicher energiepolitischer Veränderungen seit den 1970er Jahren eine hohe Bedeutung zugeschrieben werden kann. Daher besteht das Ziel darin, Windenergieanlagen herauszuarbeiten, welche als hervorragende Zeugnisse der Entwicklung der Windenergienutzung in Deutschland zu bewerten sind.
Zur Annäherung werden diese zunächst als Untersuchungsgegenstand typologisch abgegrenzt. Eine wesentliche Besonderheit von Windenergieanlagen besteht darin, dass sie im Verhältnis zur eigentlichen Flächenversiegelung durch ihre vertikale Struktur erhebliche visuelle Auswirkungen auf die Landschaft haben. Anschließend wird die Entwicklung der Windenergienutzung seit den 1970er Jahren genauer betrachtet, welche insgesamt nicht linear verlief und von vielen Konflikten gekennzeichnet ist. Diese muss im Kontext eines wachsenden Umweltbewusstseins verstanden werden, das umfangreiche energiepolitische Veränderungen zur Folge hatte. Auf dieser Grundlage werden schließlich in einer denkmalkundlichen Reihenuntersuchung Windenergieanlagen herausgearbeitet, welche in hervorragender Weise von der Entwicklung zeugen. Die Auswahl bleibt allerdings mit sechs Objekten im Verhältnis zum Gesamtbestand von knapp 30.000 Anlagen relativ beschränkt, weil das auf die Abgrenzung von Besonderheiten ausgelegte etablierte Denkmalverständnis bei einem zeitlich so dichten Bestand gleichartiger Bauwerke an eine Grenze kommt.
Abschließend werden mögliche Erhaltungsperspektiven sowie denkmaltheoretische und -praktische Schlussfolgerungen diskutiert. Dabei ist unbedingt ein Erhalt am Ursprungsstandort anzustreben, wobei im Einzelfall entschieden werden muss, ob Belange des Funktions- oder Substanzerhaltes höher zu gewichten sind. Die skizzierten Auswahlprobleme regen darüber hinaus zur Diskussion zusätzlicher denkbarer Bewertungskategorien an, wobei sich insbesondere die gesellschaftliche Wahrnehmung und ökologische Werte aufdrängen. Zudem kann für die stärkere Berücksichtigung von Funktionszusammenhängen bei der Betrachtung technischer Infrastruktur in der Denkmalpflege plädiert werden. Insgesamt führt die denkmalkundliche Auseinandersetzung mit Windenergieanlagen damit weit über die Herausarbeitung einzelner Objekte hinaus und macht eindrücklich auf aktuelle Herausforderungen der Denkmalpflege und darüber hinaus aufmerksam.
Die Abkürzung PCC bezieht sie sich hier auf Polymer modified Cement Concrete, also mit Kunststoffen modifizierte Mörtel und Betone. Hierfür hat sich diese Abkürzung auch international durchgesetzt. Sie bezeichnet Baustoffe, die neben dem mineralischen Bindemittel Zement auch Kunststoffe enthalten. Zement und Kunststoff erzielen im späteren Mörtel bzw. Beton eine gemeinschaftliche Bindemittelwirkung. Wiederholter Gegenstand von Schadensfällen ist das Versagen des Haftverbundes zu anderer Bausubstanz. Da PCC häufig als dünne Schutzschicht auf vorhandenen Beton aufgetragen werden, führt ein Versagen der Adhäsion früher oder später auch zu einem Versagen dieser Schutzfunktion. Umgekehrt kann ein Versagen des Schutzes infolge von Rissen im PCC auch im Nachhinein zum Ablösen der Beschichtung führen. Ursächlich für dieses kohäsive Versagen sind dabei i. d. R. die Auswahl falscher bzw. nicht aufeinander abgestimmter Baustoffsysteme oder schlicht Verarbeitungsfehler. Das Ziel dieser Arbeit war es zu untersuchen, welchen Einfluss die kohäsiven und adhäsiven Eigenschaften von PCC auf deren Dauerhaftigkeit, insbesondere bei der Anwendung als Beschichtungsmaterial, haben. Dazu wurden vier maßgebliche Schwerpunkte bearbeitet. Eine zentrale Rolle für die Dauerhaftigkeit eines Beschichtungsmaterials spielt dessen Längenänderungsverhalten. Der Betrag der positiven und negativen Längenänderungen ist bestimmend für die Spannungen, die im Beschichtungsmaterial entstehen können. Sind die auftretenden Spannungen höher als die Zugfestigkeit des PCC erfolgt der Spannungsabbau durch Risse. Es kommt also zum Kohäsionsversagen im Mörtel. Wird der PCC als Beschichtungsmaterial genutzt, werden die Spannungen im Idealfall über die Verbundebene zum Beschichtungsuntergrund übertragen. Übersteigen dabei diese Spannungen die maximal aufnehmbaren Verbundspannungen, kommt es zum Adhäsionsversagen zwischen Beschichtung und Untergrund. In Modellversuchen werden die Effekte des Längenänderungsverhaltens kunststoffmodifizierter Zementsteine auf den Haftverbund zu einer Gesteinskörnung untersucht. Dadurch werden Rückschlüsse auf die Kohäsion innerhalb der PCC durch die Beschreibung des adhäsiven Verbundes zwischen Zementsteinmatrix und Gesteinskörnung gezogen. Neben der Längenänderung sind auch die Festigkeitseigenschaften der PCC bedeutsam für deren Dauerhaftigkeit. Es werden die Festigkeitseigenschaften kunststoffmodifizierter Mörtel und Betone nicht nur von der mechanischen Seite betrachtet. Der Focus liegt vielmehr auf der Beschreibung der durch die Kunststoffe beeinflussten kohäsiven Eigenschaften bei mechanischer Belastung. Es wird das Verhalten der polymeren Matrix nach einer Kurzzeitbelastung untersucht. Damit werden die Vorgänge, die letztlich zu einer Beeinflussung der Festigkeitseigenschaften führen, dargestellt. In diesem Zusammenhang wird auch der Einfluss der Temperatur auf die Festigkeit der PCC betrachtet. Die Untersuchung des Frost-Taumittel-Widerstandes mittels CDF- bzw. CIF-Verfahrens ist eine gute Möglichkeit, neben der Beurteilung der Dauerhaftigkeit auch Rückschlüsse auf die kohäsiven als auch, im mikroskopischen Maßstab betrachtet, die adhäsiven Eigenschaften der PCC zu ziehen. Damit ist gemeint, dass die Kohäsion von PCC durch deren adhäsive Eigenschaften zwischen kunststoffmodifizierter Zementsteinmatrix und Gesteinskörnern maßgeblich bestimmt wird. Einerseits kann bei starkem Abfall des relativen dynamischen E-Moduls von einer geringeren Kohäsion des PCC ausgegangen werden. Dies würde dann bei einem Mörtel eher zu Rissen führen, über die wiederum betonaggressive Medien eindringen können. Im Gegensatz dazu deutet ein konstant bleibender relativer dynamischer E-Modul auf eine hohe Kohäsion und damit, bei Anwendung des PCC als Beschichtungsmaterial, auf ein höheres adhäsives Versagensrisiko der Beschichtung hin. Andererseits stellt eine höhere Abwitterung, also sozusagen das schichtenweise kohäsive Versagen, eine Gefahr bei dünnen Beschichtungen dar. Dies könnte noch durch die Anwendung anderer Taumittel (z. B. organischer) verstärkt werden. Unter diesen Gesichtspunkten wurden Untersuchungen auf der Basis des CDF-Testes sowie zur Lösungsaufnahmefähigkeit der PCC durchgeführt. Der adhäsive Verbund von PCC zu Beton ist von vielen Faktoren abhängig. Bisher kaum betrachtet wurde die Art des Aufbringens oder der Einfluss der Probengeometrie bei Laborversuchen. Diese sowie der Einfluss einer Salzbelastung des Untergrundes bzw. der Beschichtung wurden untersucht. Ein Teil der durchgeführten Untersuchungen wurde im Rahmen des Teilprojektes B3 „Dauerhaftigkeit polymermodifizierter Mörtel und Betone“ des von der DFG geförderten Sonderforschungsbereiches 524 „Werkstoffe und Konstruktionen für die Revitalisierung von Bau-werken“ realisiert.
Die Beurteilung des Beanspruchungsgrades während eines Versuchs zur experimentellen Tragsicherheitsbewertung erfolgt auf Grundlage der zeitgleich dargestellten Beanspruchungs-Verformungsbeziehung. Für ein frühzeitiges Erkennen von Strukturveränderungen (Rißbildung/Plastizierung) eignen sich jedoch insbesondere Energiebetrachtungen während der verschiedenen Versuchsphasen, da diese das Zusammenspiel von Einwirkung und Tragwerksreaktion vollständig widerspiegeln und auch geringe irreversible Strukturänderungen immer mit Energiedissipation verbunden sind. In der Arbeit wird der Versuchsgrenzlastindikator deltaS (normierte Strukturveränderungsenergie) vorgestellt. Dieser Parameter erfaßt nur die bei Belastungsversuchen interessanten Strukturveränderungen und ermöglicht damit eine objektive Beurteilung des eingereichten Beanspruchungsgrades und eine zuverlässige Identifikation der Versuchsgrenzlast. Anhand von Versuchen im Labor und am realen Bauwerk wird die Anwendung des Indikators erläutert und seine Eignung nachgewiesen.
In der Arbeit werden Möglichkeiten aufgezeigt, die Tragfähigkeit von Queranschlüssen an Trägern aus Voll- und Brettschichtholz abzuschätzen. Die Tragfähigkeit dieser Anschlüsse wird nicht allein durch die Tragfähigkeit der mechanischen Verbindungsmittel selbst begrenzt. Die Tragfähigkeit der Verbindungsmittel wird in dieser Arbeit a priori als hinreichend betrachtet. Sie kann z. B. nach der Theorie von JOHANSEN bestimmt werden. Insbesondere bei solchen Anschlüssen, welche unterhalb der Schwerachse von Trägern angeordnet sind, erzeugen die durch die Verbindungsmittel eingeleiteten Lasten Beanspruchungen, welche die Tragfähigkeiten dieser Anschlüsse bestimmen. Die Abschätzung der Tragfähigkeit auf der Basis von Spannungen hat bei dieser Problemstellung methodische Schwächen. Bauteile aus Holz können unter Gebrauchsbedingungen rißbehaftet sein. Mit den Methoden der Linear-Elastischen Bruchmechanik kann die Tragfähigkeit von rißbehafteten Bauteilen beurteilt werden. Es werden wegen der Vielzahl möglicher Ausführungvarianten lediglich Anschlüsse betrachtet, welche mit stiftförmigen Verbindungsmitteln hergestellt werden. Zur Bestimmung bruchmechanischer Kennwerte werden numerische Methoden angewendet. Es werden wichtige Parameter dieser Anschlüsse untersucht und hinsichtlich ihrer Berücksichtigung im Rechenmodell bewertet. Zur Verifizierung des Rechenmodells werden Vergleiche mit experimentellen Untersuchungen anderer Wissenschaftler angestellt. Der Einsatz verschiedener Versagenskriterien wird diskutiert. Schließlich wird ein formaler Zusammenhang zur Abschätzung der Tragfähigkeit für einzelne Verbindungsmittel hergestellt. Weiterhin wird die Tragfähigkeit von praxisüblichen Anschlüssen anhand einfacher Zusammenhänge aufgezeigt.
Die Arbeit beschäftigt sich mit der Entstehung eines ökonomischen Kraftmaßes am Beispiel der Maschine von Marly im Zeitraum von ca. 1680 bis 1840. Die Leitthese der Dissertation besagt, dass vom 17. zum 19. Jahrhundert eine grundlegende Transformation des Maschinenbegriffs stattfand, die als Übergang vom Substanzbegriff zum Funktionsbegriff der Maschine bezeichnet werden kann. Im 17. Jahrhundert wurden mechanische Apparate als in sich geschlossene, selbstbezügliche Strukturen aufgefasst. Als anschaulich erfahrbare Objekte konnten sie als Bildgeber dienen, die mittels des Verfahrens der Strukturanalogie Erklärungsmuster für verschiedenste Phänomene (Körper, Staat, Welt) boten. Demzufolge galten sie als selbstevident: sie waren erklärend und mussten selbst nicht erklärt werden. Ihr etwaiger Zweck und ihre Einbettung in gesellschaftliche Zusammenhänge spielten dabei keine Rolle. Wie anhand der Beschreibungen und Darstellungen aus jener Zeit nachgewiesen werden kann, wurde die Maschine von Marly innerhalb dieser Episteme als architektonisches Objekt wahrgenommen, bei dem vor allem das Zusammenspiel der einzelnen Elemente Aufmerksamkeit erregte. Wie andere Maschinen auch stand sie unter dem Primat der Sichtbarkeit. Man war davon überzeugt, dass die Eigenschaften einer Maschine von der strukturellen Anordnung ihrer Bauteile abhingen und glaubte, ihre Qualität an ihrer Gestalt ablesen zu können. Ab der Mitte des 18. Jahrhunderts tauchte die Maschine von Marly in den Schriften physiokratischer Autoren auf. Zuerst diente sie dort als Beispiel für die Verschwendungssucht Louis’ XIV. und als Metapher für eine schlechte Einrichtung des Staates. Doch zunehmend begann man, sie auch in ihrer Faktizität als technisch-politisches Objekt zu begreifen. Man kritisierte ihre aktuelle Nutzung und schlug andere Möglichkeiten ihrer Verwendung vor, etwa die Bewässerung von Feldern oder die städtische Trinkwasserversorgung. Damit war die Maschine von Marly nicht länger ein Modell für die Einrichtung des Staates, das nur am Maßstab der immanenten Perfektion beurteilt werden konnte. Vielmehr war sie nun ein Instrument der Regierung, das sich als Teil eines staatlich verfassten Gemeinwesens verantworten musste. Als solches wurde sie auch zu einem bevorzugten Gegenstand aufklärerischer Reformprojekte. Das zeigt sich besonders deutlich am Wettbewerb, den die Pariser Akademie der Wissenschaften 1784-1786 organisiert hatte und der Vorschläge zur Verbesserung oder Ersetzung der Maschine von Marly zum Gegenstand hatte. Die Auswertung der mehr als 100 eingereichten Projekte und Memoranden ermöglicht einen einzigartigen Blick auf die Hoffnungen und Wünsche, die Ende des 18. Jahrhunderts an die Erfindung technischer Geräte gekoppelt waren. Um 1800 kann man die allmähliche Entstehung eines Funktionsbegriffs der Maschine bemerken. Lazare Carnots Essai sur les machines en général, der eine in der Sprache der Algebra artikulierte Definition der Maschine beinhaltete, trug maßgeblich dazu bei, die Anschaulichkeit zugunsten eines operativen Symbolismus zu delegitimieren. Erst dadurch war die Formulierung eines Effizienzkalküls möglich. Ergänzt wurde diese Formalisierung durch den Diskurs der Industrialisierung, in dem technische Apparate zunehmend als Produktionsmittel verstanden wurden. Die Maschine von Marly war ein wichtiger Schauplatz für die Entstehung eines ökonomischen Kraftmaßes. Nicht nur wurden dort Experimente mit verschiedenen Messinstrumenten (Dynamometern) durchgeführt, auch diente sie Joseph Montgolfier als Beispiel um zu beweisen, dass Kraft als Geldwert ausgedrückt werden könne. In den ersten Jahrzehnten des 19. Jahrhundert wurden Maschinen schließlich relational als Positionen innerhalb eines nationalen Produktionssystems definiert. Sie galten als Krafttransformatoren, bei denen ein bestimmter Input von ‚force motrice’ einen entsprechenden Output von ‚travail utile’ ergeben würde. Ihre vornehmlichste Aufgabe war die möglichst effiziente Ausnutzung der Kraftressourcen. Den vorläufigen Endpunkt erreichte die Entstehung des ökonomischen Kraftmaßes um 1830 mit der Formulierung des Begriffs der ‚mechanischen Arbeit’.
This practice-based research examines platforms and encounters that have a participatory character as a strategy to create lived and shared experiences where new forms of appropriation of the city can emerge. The selected case studies propose and initiate certain urban experiences that induce changes in perception, the exchange of perspectives, and that denaturalize habits and patterns of behavior. I suggest that when these sensitive experiences become imprinted in body memory, they can empower citizens to have more active, creative, and/or critical attitudes towards their environments. Searching for new repertoires of everyday practices that contest commodification of both the body and the city, this thesis is oriented towards open-ended processes of constructing mentalities rather than those of planning changes on the material conditions of public space. It uses forms of academic investigation that merge intellectual debate and experimental practice, joining art, urbanism and social engaged practices in an extradisciplinary (Howes 2007) attitude towards the city. Based on the materials generated by the case studies (combining theoretical knowledge with artistic sensibility), the affective and corporeal involvement of researchers in the situations they analyze and co-create, is sustained in opposition to the traditional academic critical distance.
Das zentrale Problem der Arbeit ist die Untersuchung der Rolle von Orten und Räumen für die Evolution bestimmter visueller Medien im 19. Jahrhundert. Die historische Schwelle wird mit der Erfindung des Panoramas, der Geburt der Passage und der Reform der Bibliothek um 1800 markiert. Ausgehend von der Systemtheorie Luhmanns und dem französischen Poststrukturalismus (Baudry, Lyotard, Foucault) entwickelt die Arbeit dazu einen Begriff des Dispositivs, der zur Untersuchung des Verhältnisses von Objekt, Betrachter und Apparat verwendet wird. Im Mittelpunkt steht dabei das Wechselverhältnis von Wahrnehmung und Kommunikation. Mit Bezug auf Kants »Kritik der Urteilskraft« wird dabei ein neuer Vorschlag für den Code des Kunstsystems – gestaltet/nicht gestaltet – entwickelt. Die zentralen Begriffe für die Definition des Dispositivs sind Abschirmung, Distanzierung und Inszenierung. Damit wird der Versuch unternommen, die Frage des Raumes in der Systemtheorie zu klären. Die historische Analyse beschreibt die Entwicklung vom Theater zum Kino im 19. und frühen 20. Jahrhundert und fokussiert dabei vor allem auf das Festspielhaus Wagners in Bayreuth. Abschließend wird der Beitrag der Warenhäuser und des Schaufensters zur Evolution des Wirtschaftsystems untersucht.
Numerical models and their combination with advanced solution strategies are standard tools for many engineering disciplines to design or redesign structures and to optimize designs with the purpose to improve specific requirements. As the successful application of numerical models depends on their suitability to represent the behavior related to the intended use, they should be validated by experimentally obtained results. If the discrepancy between numerically derived and experimentally obtained results is not acceptable, a model revision or a revision of the experiment need to be considered. Model revision is divided into two classes, the model updating and the basic revision of the numerical model. The presented thesis is related to a special branch of model updating, the vibration-based model updating. Vibration-based model updating is a tool to improve the correlation of the numerical model by adjusting uncertain model input parameters by means of results extracted from vibration tests. Evidently, uncertainties related to the experiment, the numerical model, or the applied numerical solving strategies can influence the correctness of the identified model input parameters. The reduction of uncertainties for two critical problems and the quantification of uncertainties related to the investigation of several nominally identical structures are the main emphases of this thesis. First, the reduction of uncertainties by optimizing reference sensor positions is considered. The presented approach relies on predicted power spectral amplitudes and an initial finite element model as a basis to define the assessment criterion for predefined sensor positions. In combination with geometry-based design variables, which represent the sensor positions, genetic and particle swarm optimization algorithms are applied. The applicability of the proposed approach is demonstrated on a numerical benchmark study of a simply supported beam and a case study of a real test specimen. Furthermore, the theory of determining the predicted power spectral amplitudes is validated with results from vibration tests. Second, the possibility to reduce uncertainties related to an inappropriate assignment for numerically derived and experimentally obtained modes is investigated. In the context of vibration-based model updating, the correct pairing is essential. The most common criterion for indicating corresponding mode shapes is the modal assurance criterion. Unfortunately, this criterion fails in certain cases and is not reliable for automatic approaches. Hence, an alternative criterion, the energy-based modal assurance criterion, is proposed. This criterion combines the mathematical characteristic of orthogonality with the physical properties of the structure by modal strain energies. A numerical example and a case study with experimental data are presented to show the advantages of the proposed energy-based modal assurance criterion in comparison to the traditional modal assurance criterion. Third, the application of optimization strategies combined with information theory based objective functions is analyzed for the purpose of stochastic model updating. This approach serves as an alternative to the common sensitivity-based stochastic model updating strategies. Their success depends strongly on the defined initial model input parameters. In contrast, approaches based on optimization strategies can be more flexible. It can be demonstrated, that the investigated nature inspired optimization strategies in combination with Bhattacharyya distance and Kullback-Leibler divergence are appropriate. The obtained accuracies and the respective computational effort are comparable with sensitivity-based stochastic model updating strategies. The application of model updating procedures to improve the quality and suitability of a numerical model is always related to additional costs. The presented innovative approaches will contribute to reduce and quantify uncertainties within a vibration-based model updating process. Therefore, the increased benefit can compensate the additional effort, which is necessary to apply model updating procedures.
The advent of high-performance mobile phones has opened up the opportunity to develop new context-aware applications for everyday life. In particular, applications for context-aware information retrieval in conjunction with image-based object recognition have become a focal area of recent research. In this thesis we introduce an adaptive mobile museum guidance system that allows visitors in a museum to identify exhibits by taking a picture with their mobile phone. Besides approaches to object recognition, we present different adaptation techniques that improve classification performance. After providing a comprehensive background of context-aware mobile information systems in general, we present an on-device object recognition algorithm and show how its classification performance can be improved by capturing multiple images of a single exhibit. To accomplish this, we combine the classification results of the individual pictures and consider the perspective relations among the retrieved database images. In order to identify multiple exhibits in pictures we present an approach that uses the spatial relationships among the objects in images. They make it possible to infer and validate the locations of undetected objects relative to the detected ones and additionally improve classification performance. To cope with environmental influences, we introduce an adaptation technique that establishes ad-hoc wireless networks among the visitors’ mobile devices to exchange classification data. This ensures constant classification rates under varying illumination levels and changing object placement. Finally, in addition to localization using RF-technology, we present an adaptation technique that uses user-generated spatio-temporal pathway data for person movement prediction. Based on the history of previously visited exhibits, the algorithm determines possible future locations and incorporates these predictions into the object classification process. This increases classification performance and offers benefits comparable to traditional localization approaches but without the need for additional hardware. Through multiple field studies and laboratory experiments we demonstrate the benefits of each approach and show how they influence the overall classification rate.
Datenmodelle zur Bearbeitung von Ingenieuraufgaben am Beispiel von Wohnhäusern in Stahlbauweise
(2006)
Modelle bilden die Grundlage der Planung. Sie repräsentieren die zur Bearbeitung erforderlichen Eigenschaften eines Bauwerks in einer an die spezifische Aufgabe angepassten Form. Zwischen den verschiedenen zur Abbildung des Bauwerks eingesetzten Modellen bestehen fachliche Zusammenhänge bezüglich der darin abgebildeten Aspekte. Diese Abhängigkeiten werden in der praktischen Planungsbearbeitung gegenwärtig auf Grundlage von Erfahrungswerten, normativen Vorgaben und vereinfachenden Annahmen berücksichtigt. Die detailliertere Modellierung von Bauwerkseigenschaften führt zu einer engeren Verzahnung der verschiedenen Modelle. Um eine fachliche Inselbildung zu vermeiden, ist eine entsprechend angepasste Abbildung der zwischen den einzelnen Modellen bestehenden Beziehungen erforderlich. Mit den steigenden Ansprüchen an eine Bearbeitung von Ingenieuraufgaben gewinnt eine über den Zweck der Bereitstellung ausgewählter Informationen zum Bauwerk und der Unterstützung eines Datenaustauschs zwischen verschiedenen Fachplanern hinausgehende datentechnische Abbildung an Bedeutung. Dies setzt eine Diskussion der Anforderungen an eine solche Beschreibung aus fachlicher Sicht voraus. Die Untersuchung der fachlichen Anforderungen wird am Beispiel von Wohnhäusern in Stahlbauweise geführt.
One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at
nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour.
Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere.
Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks.
Key contributions
The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture.
A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable.
A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations.
The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed.
Die zu beobachtenden kürzeren Produktlebenszyklen und eine schnellere Marktdurchdringung von Produkttechnologien erfordern adaptive und leistungsfähige Produktionsanlagen. Die Adaptivität ermöglicht eine Anpassung der Produktionsanlage an neue Produkte, und die Leistungsfähigkeit der Anlage stellt sicher, dass ausreichend Produkte in kurzer Zeit und zu geringen Kosten hergestellt werden können. Durch eine Modularisierung der Produktionsanlage kann die Adaptivität erreicht werden. Jedoch erfordert heutzutage jede Adaption manuellen Aufwand, z.B. zur Anpassung von proprietären Signalen oder zur Anpassung übergeordneter Funktionen. Dadurch sinkt die Leistungsfähigkeit der Anlage.
Das Ziel dieser Arbeit ist es, die Interoperabilität in Bezug auf die Informationsverwendung in modularen Produktionsanlagen zu gewährleisten. Dazu werden Informationen durch semantische Modelle beschrieben. Damit wird ein einheitlicher Informationszugriff ermöglicht, und übergeordnete Funktionen erhalten Zugriff auf alle Informationen der Produktionsmodule, unabhängig von dem Typ, dem Hersteller und dem Alter des Moduls. Dadurch entfällt der manuelle Aufwand bei Anpassungen des modularen Produktionssystems, wodurch die Leistungsfähigkeit der Anlage gesteigert und Stillstandszeiten reduziert werden.
Nach dem Ermitteln der Anforderungen an einen Modellierungsformalismus wurden potentielle Formalismen mit den Anforderungen abgeglichen. OWL DL stellte sich als geeigneter Formalismus heraus und wurde für die Erstellung des semantischen Modells in dieser Arbeit verwendet. Es wurde exemplarisch ein semantisches Modell für die drei Anwendungsfälle Interaktion, Orchestrierung und Diagnose erstellt. Durch einen Vergleich der Modellierungselemente von unterschiedlichen Anwendungsfällen wurde die Allgemeingültigkeit des Modells bewertet. Dabei wurde gezeigt, dass die Erreichung eines allgemeinen Modells für technische Anwendungsfälle möglich ist und lediglich einige Hundert Begriffe benötigt.
Zur Evaluierung der erstellten Modelle wurde ein wandlungsfähiges Produktionssystem der SmartFactoryOWL verwendet, an dem die Anwendungsfälle umgesetzt wurden. Dazu wurde eine Laufzeitumgebung erstellt, die die semantischen Modelle der einzelnen Module zu einem Gesamtmodell vereint, Daten aus der Anlage in das Modell überträgt und eine Schnittstelle für die Services bereitstellt. Die Services realisieren übergeordnete Funktionen und verwenden die Informationen des semantischen Modells. In allen drei Anwendungsfällen wurden die semantischen Modelle korrekt zusammengefügt und mit den darin enthaltenen Informationen konnte die Aufgabe des jeweiligen Anwendungsfalles ohne zusätzlichen manuellen Aufwand gelöst werden.
Die Arbeit „Das Bild der Zwischenstadt“ sucht nach Möglichkeiten zur Qualifizierung der verstädterten Landschaft, für die Thomas Sieverts den Begriff „Zwischenstadt“ geprägt hat. Die Auseinandersetzung mit „räumlicher Identität“ steht dabei im Mittelpunkt: In deren Dekodierung und Inszenierung wird ein Potenzial erkannt, die Aufenthalts- und Erlebnisqualität der Zwischenstadt zu verbessern. Der Betrachtungsraum der Arbeit zwischen Frankfurt am Main und seinen prosperierenden Umlandgemeinden eignet sich in besonderer Weise, die „Anatomie der Zwischenstadt“ zu dekodieren. Schicht für Schicht wird der Versuch unternommen, die eigene Sprache dieses Raumes zu entziffern. Dabei werden Methoden der Beschreibung und Darstellung entwickelt, die den spezifischen räumlichen Eigenschaft der Zwischenstadt gerecht zu werden suchen. Die Ergebnisse dieser Auseinandersetzung lassen deutliche Transformationen in der Zwischenstadt erkennen und entheben sie aus ihrer vermeintlichen Eigenschaftslosigkeit. Orte mit Bedeutung, Zusammenhänge und Raumgeschichten werden lesbar, es zeigen sich Ansätze eigener Urbanität und Zentralität. Die Zwischenstadt hat sich von ihrer einseitigen Dependenz zur Kernstadt gelöst, tritt aber gleichzeitig in einen umfassenden Wandel, um sich geänderten Lebensformen und Bedürfnissen anzupassen. Ältere, den Raum prägende Einfamilienhausgebiete und Großsiedlungen, aber auch monofunktionale Gewerbegebiete und die typischen suburbanen Einkaufszentren erfüllen keineswegs mehr automatisch die Wohnwünsche und Anforderungen einer Dienstleistungs- und Freizeitgesellschaft. Die Arbeit greift die unverkennbare Transformation des Bildes der Zwischenstadt als Chance zur Qualifizierung dieses Raumes auf. Entwickelt werden Qualifizierungsmodelle, die der Tendenz zu Segregation und Abtrennung mit einer neuen Integrationskultur für die Zwischenstadt begegnen: Als prägender Lebensraum der Stadtregion muss die Zwischenstadt einen großen Teil der Bedürfnisse Ihrer Bewohner und Benutzer an den Raum befriedigen. Zunehmend sind diese Bedürfnisse nicht nur funktioneller Art, sondern werden überlagert von einem Bedürfnis nach Raumqualität, Verortung und Identifikationsmöglichkeiten. Für diese Bedürfnisse angemessene und auratische Raumbilder zu finden oder zu inszenieren, ist im Angesicht des Status Quo der Stadtlandschaft eine wichtige Herausforderung.
The thesis concerns a work of urban history intended not to describe the city but rather to interpret it. By doing so, I have interpreted the city by means of the role played by the so-called ‘great property’ in the European city-making process during the last three decades of the 20th century, specifically focused on the concrete case of military properties in Italy. I have also considered the role played by other kinds of great properties, i.e. industries and railway, which previously acted in the production of the built environment in a different way respect to the military one. As all of them have as common denominator the fact of being ‘capital in land’, I analysed great industrial and railway properties in order to extrapolate a methodology which helped me to interpret the relationship between military properties and city-making process in Europe in the late 20th century.
I have analysed the relationship between the capital in land and the city-making process on the ground of the understanding the interrelation between the great property, the urban development, and the agents involved in the urban and territorial planning. Here I have showed that urban planning is not the decisive factor influencing the citymaking process, but instead the power held by the capital in land. I have found that is the great property the trigger of the creation of new ‘areas of centrality’ intended as large areas for consumerism. As far as the role played by great property is concerned, I have also discovered that it has evolved over time. Originally, industrial and railway properties have been regenerated into a wide range of new profit-driven spaces; successively, I have found out that most of the regeneration of military premises aimed to materialise areas of centrality. The way of interpreting this factor has been based on focusing my attention on the military premises in Italy: I have classified their typology when they have been built and, most importantly, when they have been regenerated into new areas of centrality.
This is a work concerned with the increasing processes of social exclusion in cities nowadays. In approaching this phenomenon, the research highlights how people interact with their institutional environments. This is also, perhaps centrally, an investigation into the possibility to engage an individual perspective to understand the transformation in urban experience, which is orienting society to new uses and forms of exclusion. Following the perspective deployed by the so-called “sociology of individuals” in French sociology or “reengagement of agency” in the Anglo-Saxon world; I claim that individuals as well as collectives are gaining increasing power to question and re-organize institutions. This re-organization, in the case of socio-urban institutions, is no guarantee for major levels in integration, cohesion, and equality. Unfortunately, social institutions are becoming hard in its exclusionary capabilities under people intervention during the last four decades.
I believe that urban sociology is a field of struggle between different perspectives competing to “make sense” of social phenomena in cities. The orientation supported in this research is just one on many and it follows the roots of people and their life experiences within cities and how they influence the processes that shape the city. The last formulation is possibly not the clearest, because as we all know, references to “inhabitants” are presented in every variant of urban sociology. Nevertheless, there are not many variants focusing on peoples’ capability to influence institutional environments and by this way affecting the urban condition in which they find themselves. The particular institution selected for this study is the “School”.
This thesis is organized around two parts: part one includes the conceptual framework, methodological approach, and historical contextualization; part two describes three case studies produced to analyse the forms of and the relations between individuals and school institution. Part one starts from a premise: within the context of declining welfare State in the case of industrialized countries, an important part of urban studies focuses on economic and spatial restructuration. Confronted with the same situation, a part of social sciences shifts to the individuals’ agency and social uncertainty. This research is embedded in the last theoretical description presented above, thus, because it tries to observe urban processes from the perspective of the individual and outside of developed economies. In this sense, Latin America represents a fundamental reference because urban conditions are historically marked by weak institutional arrangements to integrating people and large levels of marginality and exclusion among population. In this scenario individuals’ practices around inclusion-exclusion have an essential meaning in everyday life.
Part two offers three study cases in which the relation between individuals and school institutions has been analyzed for the Metropolitan area of Santiago de Chile (MAS). Using different methodological resources an exhaustive account on three levels is presented: i) geo-referencing State intervention in public policies connected with neighborhood and schools to understand the form and extent of socio-urban exclusion in MAS, ii) narrative biographies applied to parents with children attending primary school, in order to reconstruct the familiar process of school selection and describing its impacts on the stabilization of school as an exclusionary device, and iii) autoethnography to describe in detail the temporal dimension involved in stabilizing actions which reinforces social mechanisms of urban integration-exclusion during the last three decades in Chile.
A key argument advanced by this research proposes that: the way in which the idea of integration is enacted by people in their biographical careers imprints changes on the institutional orientation and by this way, contributes to the reorganization urban life. The high level of social exclusion in Santiago de Chile is not accountable without considering transformation in all socio-urban institutions, especially the school. No family considers social integration with people from a low social, economical or cultural background as relevant orientation for school selection. This particularity of the Chilean social reality is not derivable from any big capitalistic or modernization processes impacting our cities.
Within the light of the thesis findings, I conclude that socio-urban institutions logics must be reassessment under the influences of people actions and representations. I also propose a consideration to major complementarities between urban studies and urban-institutions analysis. The school institutions is not just a sectorial field reserved to the researcher in education, on the contrary, it represent a key entrance to address people’s experience in their institutional urban environments. The re-emergence of social and urban movements in 2010, under the “Arab Spring” or the “Chilean Student Movements”, is not only a demonstration in the public space as result of major global trends. These situations are in essence, for this research, individuals gathering together and calling for recognition and autonomy inside institutional environment that tends to reject them. Similar situation was the focus of the Latin American urban sociology research, within the focus on grassroots and urban social movements at the end of the 1960s and beginning of the 1970s.
In both cases, socio-urban institutions, unaware of recognition requirements claimed by inhabitants, are not beyond individual or collective reach. My main concern is to show that socio-urban institutions are constantly re-shaped as a result of individual action, what makes the difference, is the spirit that we all, socially, imprint on the logics of our socio-urban institutions, moving them to inclusion or exclusion.
The current thesis presents research about new methods of citizen participation based on digital technologies. The focus on the research lies on decentralized methods of participation where citizens take the role of co-creators. The research project first conducted a review of the literature on citizen participation, its origins and the different paradigms that have emerged over the years. The literature review also looked at the influence of technologies on participation processes and the theoretical frameworks that have emerged to understand the introduction of technologies in the context of urban development. The literature review generated the conceptual basis for the further development of the thesis.
The research begins with a survey of technology enabled participation applications that examined the roles and structures emerging due to the introduction of technology. The results showed that cities use technology mostly to control and monitor urban infrastructure and are rather reluctant to give citizens the role of co-creators. Based on these findings, three case studies were developed. Digital tools for citizen participation were conceived and introduced for each case study. The adoption and reaction of the citizens were observed using three data collection methods.
The results of the case studies showed consistently that previous participation and engagement with informal citizen participation are a determinining factor in the potential adoption of digital tools for decentralized engagement. Based on these results, the case studies proposed methods and frameworks that can be used for the conception and introduction of technologies for decentralized citizen participation.
This research represents an effort made towards contribute to the critical thinking from an analysis of the hegemonic neoliberal ideology, which supports the idea of the end of history and the technocratic universalism which in turn implies the imposition of a single model of life, denying, in the name of realism and the end of utopias, any other alternative possibility.
This makes it necessary to recover the critical thinking to analyze and understand the reality, thus overcoming the ideological barrier towards claiming that things can be otherwise.
It is clear from this research that the discourse of sustainable development has unquestionably transformed the context and content of political activity in Europe. This discourse has exercised and obvious influence in the Governance processes, mainly because it has contributed to the introduction of a new political field, which was then promoted, either explicitly or implicitly by policy-makers, researchers on the field and practitioners during the last three decades. Though it may be bold to affirm that the discourse of sustainable development is the sole driver of these whole set of changes, there is no doubt that it has played a key part in the way in which the governance priorities have been handled in the European continent.
The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part.
First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images.
Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids.
Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1
continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.
Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid−structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size.