Refine
Document Type
- Conference Proceeding (50)
- Article (20)
- Doctoral Thesis (10)
- Book (1)
- Master's Thesis (1)
Institute
- Professur Informatik im Bauwesen (62)
- Institut für Strukturmechanik (ISM) (4)
- Professur Angewandte Mathematik (3)
- Professur Informations- und Wissensverarbeitung (2)
- Erdbebenzentrum (1)
- Graduiertenkolleg 1462 (1)
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (1)
- Juniorprofessur Simulation und Experiment (1)
- Professur Baubetrieb und Bauverfahren (1)
- Professur Bauchemie und Polymere Werkstoffe (1)
Keywords
- Modellierung (82) (remove)
The dynamic behaviour of shells, which are widely used in construction and mechanical engineering as critical components of machinery and 3-D structures, under static and dynamic loadings is described by system of deep nonlinear differential equations. Solution of these equations can be received with assistance of technique basing on a modern numerical algorithms and computer modeling.. The system of nonlinear differential equations of vibration of the shells is proposed taking into account the inertia forces in the tangential and normal directions. Its solution is based on combination of parameter prolongation method, finite-difference method and the Newton-Kantorovich iterative algorithm that allows plotting the loading trajectories and determination of bifurcation points on them. Package of Applied Programs >SEVSOR< is a computation means to be used in research of deformation, stability and vibration in thin axically-symmetric shells of complicated shape Input data include information on shell geometry, physical and mechanical properties, bearing conditions, types of loadings and load application. Frame output of motion forms in real time or either in decelerated or accelerated time scales for creating cartoons or video films is used for analysis of the compound dynamic processes in shell-type structures.
Numerische Approximation makroskopischer Verkehrsmodelle mit der Methode der Finiten Elemente
(2000)
Makroskopische Verkehrsmodelle sind ein wesentliches Hilfsmittel bei der Beurteilung und Steuerung von Verkehrsflüssen auf Hauptverkehrsadern. Für die notwendige Beeinflussung des Verkehrsablaufs werden Online-Messungen und prognostische numerische Simulationen benötigt. Für die Simulationen bieten sich makroskopische Verkehrsmodelle an, die den Verkehr als kontinuierliche Fahrzeugströmeabbilden. Aufgrund der Analogie zu den Modellen der Strömungsmechanik lassen sich die numerischen Verfahren aus diesem Bereich auch zur Lösung makroskopischer Verkehrsmodelle verwenden. Es wird eine Finite-Elemente-Approximation für die numerische Umsetzung makroskopischer Verkehrsmodelle vorgestellt. Exemplarisch wird sie am Verkehrsmodell von Kerner und Konhäuser erläutert. Dieses und andere makroskopische Verkehrsmodelle wurden bisher mit der Methode der Finiten Differenzen gelöst. Die vorgestellte Approximation entspricht einem Petrov-Galerkin-Verfahren, bei dem der Fehler eines Standard-Galerkin-Verfahrens mit Hilfe eines Upwinding-Koeffizienten minimiert wird. Die Wahl des Upwinding-Koeffizienten ist übertragbar und basiert ausschließlich auf dem Charakter der zugrundeliegenden Gleichungen. Die Ergebnisse zeigen typische Phänomene eines Verkehrsablaufs wie die Entstehung von Stop-and-Go-Wellen oder Staus. Die Finite-Elemente-Methode erweist sich für unter-schiedlichste Verkehrsmodelle als ausgesprochen stabil.
Numerische Berechnung von Mauerwerkstrukturen in homogenen und diskreten Modellierungsstrategien
(2004)
Im Zentrum der Arbeit stehen die Entwicklung, Verifikation, Implementierung und Leistungsfähigkeit numerischer Berechnungsmodelle für Mauerwerk im Rahmen der Kontinuums- und Diskontinuumsmechanik. Makromodelle beschreiben das Mauerwerk als verschmiertes Ersatzkontinuum. Mikromodelle berücksichtigen durch die Modellierung der einzelnen Steine und Fugen die Struktur des Mauerwerkverbandes. Soll darüber hinaus der durch die Querdehnungsinteraktion zwischen Stein und Mörtel hervorgerufene heterogene Spannungszustand im Mauerwerk abgebildet werden, so ist ein detailliertes Mikromodell, welches Steine und Fugen in ihren exakten geometrischen Dimensionen berücksichtigt, erforderlich. Demgegenüber steht die vereinfachte Mikromodellierung, bei der die Fugen mit Hilfe von Kontaktalgorithmen beschrieben werden. Im Rahmen der Makromodellierung werden neue räumliche Materialmodelle für verschiedene ein- und mehrschalige Mauerwerkarten hergeleitet. Die vorgestellten Modelle berücksichtigen die Anisotropie der Steifigkeiten, der Festigkeiten sowie des Ver- und Entfestigungsverhaltens. Die numerische Implementation erfolgt mit Hilfe moderner elastoplastischer Algorithmen im Rahmen der impliziten Finite Element Methode in das Programm ANSYS. Innerhalb der detaillierten Mikromodellierung wird ein neues, aus Materialbeschreibungen für Stein, Mörtel sowie deren Verbund bestehendes nichtlineares Berechnungsmodell entwickelt und in das Programm ANSYS implementiert. Die diskontinuumsmechanische Beschreibung von Mauerwerk im Rahmen der vereinfachten Mikromodellierung erfolgt unter Verwendung der expliziten Distinkt Element Methode mit Hilfe der Programme UDEC und 3DEC. An praktischen Beispielen werden Probleme der Tragfähigkeitsbewertung gemauerter Bogenbrücken, Möglichkeiten zur Bewertung vorhandener Rissbildungen und Schädigungen an historischen Mauerwerkstrukturen und Traglastberechnungen an gemauerten Stützen ausgewertet und analysiert.
The failure mechanisms of textile reinforced concrete (TRC), which is a composite of bundles of long fibers and fine concrete, are complex. Most important for the ductility is the successive debonding of the fibers from the surrounding matrix when the brittle matrix is cracking. Therefore, one of the main issues is the simulation of the bond behavior between the reinforcement and the matrix. By introducing a hierarchical material model for TRC the mechanical behavior is simulated by means of representative volume elements modelled on the meso scale. Finite element analysis is used to determine the effective properties of TRC within a periodic homogenization framework. Further, a multiscale finite element technique is suggested, where constitutive equation are formulated only on the meso level.
Im vorliegenden Beitrag wird ein in das FE-Programmsystem ANSYS implementiertes elastoplastisches Berechnungsmodell zur nichtlinearen, räumlichen Untersuchung von Mauerwerkstrukturen vorgestellt. Die Modellierung des heterogenen Baustoffs Mauerwerk erfolgt mit Hilfe eines verschmierten Ersatzkontinuums. Das anisotrope Materialverhalten wird sowohl hinsichtlich der Spannungs-Dehnungsbeziehung als auch bei der Beschreibung der Festigkeit berücksichtigt. Durch die Verwendung einer zusammengesetzten Fließbedingung ist es möglich, das Versagen der einzelnen Mauerwerkkomponenten Stein und Mörtelfugen und des Verbundes zu berücksichtigen. Dadurch ist die Anwendbarkeit des Modells für mehrere Mauerwerksarten gegeben. Die hierfür verwendeten Materialparameter sind aus einfachen Kleinkörperversuchen bestimmbar oder innerhalb gewisser Grenzen aus empirischen Formeln berechenbar. Die notwendige Beschränkung der Anzahl der Materialparameter sichert die praktische Anwendbarkeit des entwickelten Berechnungsmodells. Die numerische Umsetzung des hier verwendeten impliziten Berechnungsverfahrens lässt sich in eine lokale und eine globale Iterationsebene gliedern. Die lokale Iteration am Integrationspunkt dient der Spannungsrückführung. Dabei sind die Besonderheiten der Verarbeitung mehrflächiger Fließfiguren zu beachten. Die globale Iteration auf Systemebene sichert die Umlagerung des Residuums. Mit der Nachrechnung von Versuchsergebnissen soll das entwickelte Modell verifiziert und seine physikalische Leistungsfähigkeit eingeschätzt werden.
Assuring global consistency in a cooperative working environment is the main focus of many nowaday research projects in the field of civil engineering and others. In this paper, a new approach based on octrees will be discussed. It will be shown that by the usage of octrees not only the management and control of processes in a network-based working environment can be optimised but also an efficient integration platform for processes from various disciplines – such as architecture and civil engineering – can be provided. By means of an octree-based collision detection resp. consistency assurance a client-server-architecture will be described as well as sophisticated information services for a further support of cooperative work.
We present a model derived to describe tunnel fires. The model originates in a compressible description of the air in the tunnel. It takes into account the strong buoyancy forces and at the same time the small Mach-number of the airflow. We comment on the derivation, on analytical results and on numerical simulations of the model. The model has been validated using data from real tunnel fire experiments. It shows good agreement with the real situation.
The effectiveness of working processes accomplished by various technological machines to a large extend depends on working quality of supply, transporting and orientating mechanisms which are very often produced as positional hydro-mechanical systems. The choice of their best type and regimes of work requires construction and analysis of models of their optimum steering which are complicated by nonlinearness, multy-criterialness of problem and also by occasional outbreaks of parameters and moments of steering regime changing. It was developed the common structure of such systems allowing within common scheme to vary the complexity degree of PHMS and the methods of inhibitory efforts supplement. For some systems which are complicated in series (from two-measured linear system to nine-measured non-linear) puzzles of the most fast zero-ambit getting are solved and two-criterial problems are analyzed. (T-min-speed, Z(T)- accuracy). There are suggested the computing procedures of optimum PHMS synthesis. The effectiveness of accepted methods of solving is asserted by the analogy of the results of gradually complicated models investigation and by their good analogy with the natural experiment. It was exposed the sense of heuristic methods of improving of approximately optimum steering, their elaboration on the base of theoretical models. The basic methods of optimum PGMS construction were also nominated.
We present a physics-informed deep learning model for the transient heat transfer analysis of three-dimensional functionally graded materials (FGMs) employing a Runge–Kutta discrete time scheme. Firstly, the governing equation, associated boundary conditions and the initial condition for transient heat transfer analysis of FGMs with exponential material variations are presented. Then, the deep collocation method with the Runge–Kutta integration scheme for transient analysis is introduced. The prior physics that helps to generalize the physics-informed deep learning model is introduced by constraining the temperature variable with discrete time schemes and initial/boundary conditions. Further the fitted activation functions suitable for dynamic analysis are presented. Finally, we validate our approach through several numerical examples on FGMs with irregular shapes and a variety of boundary conditions. From numerical experiments, the predicted results with PIDL demonstrate well agreement with analytical solutions and other numerical methods in predicting of both temperature and flux distributions and can be adaptive to transient analysis of FGMs with different shapes, which can be the promising surrogate model in transient dynamic analysis.
Physikalisch nichtlineare Analyse von Aussteifungssystemen unter Einbeziehung von Lastfolgeeffekten
(2003)
Die physikalisch nichtlineare Analyse von Stahlbetontragwerken unter Berücksichtigung des Einspielverhaltens (adaptives Tragverhalten) mit Methoden der mathematischen Optimierung ist seit Jahren Gegenstand intensiver Forschungsarbeiten am Lehrstuhl Massivbau I der Bauhaus-Universität Weimar. Die dabei entwickelten Modelle und Algorithmen werden im folgenden Beitrag exemplarisch auf die Untersuchung von Aussteifungssystemen in Großtafelbauweise angewendet. Da bei diesen Gebäuden die aussteifende Konstruktion aus zusammengesetzten großformatigen Betonfertigteilen besteht, wird das Gesamttragverhalten maßgebend durch das Fugentragverhalten bestimmt. Die physikalische Nichtlinearität wird durch das Aufreißen der unbewehrten Horizontalfugen und den verschieblichen Verbund in den Vertikalfugen charakterisiert und entsprechend im Berechnungsmodell berücksichtigt. Beispielrechnungen belegen, dass für die beschriebenen Aussteifungssysteme signifikante Spannungsumlagerungen infolge des nichtlinearen Fugentragverhaltens auftreten. Weiterhin können Lastfolgeeffekte rechnerisch nachgewiesen werden. Im Gegensatz zu seismisch beanspruchten Systemen, die in kürzester Zeit wiederholt extrem beansprucht werden, ist die Eintrittswahrscheinlichkeit bemessungsrelevanter Windlasten gering.
Plausibilität im Planungsprozess - Digitale Planungshilfen für die Bebaubarkeit von Grundstücken
(2003)
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< werden Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung entwickelt. Die Vielfalt der unterschiedlichen Faktoren, die Einfluss auf den Planungsprozess nehmen können, sowie deren Abhängigkeiten voneinander werden von heutigen Planungssystemen in nur unzureichender Weise aufbereitet und verwaltet. Diese Faktoren bedingen Planungstools, deren Aufgabe die Beschaffung, Verarbeitung, Integration und Verwaltung von Informationen sowie die Veranschaulichung der komplexen Informationszusammenhänge ist. Die Entwicklung solcher Systeme ist technisch möglich. Die Schwierigkeit liegt in der Beschaffung und Strukturierung der für den Planungsprozess relevanten Informationen sowie in ihrer Aufbereitung und Integration in eine digitale Planungsumgebung. Das Bestreben des Forschungsprojektes ist es, Grundlagen für digitale Werkzeuge zu entwickeln die zu plausiblen Lösungen im Planungsprozess und somit zu erhöhter Planungssicherheit für die am Bau beteiligten Auftragnehmer und Auftraggeber führen. Es wird angestrebt Programm-Module zu entwickeln, die den Planer bei der Ermittlung von Lösungswegen zu einer Fachfrage inhaltlich unterstützen und die Nachvollziehbarkeit und Richtigkeit einer Planungsentscheidung gewährleisten und plausibel darlegen. Mit Hilfe der Module sollen Entscheidungsfindungen katalysiert werden. Die Bauvorhaben der Zukunft werden zu einem großen Teil im Bestand liegen. Dieses Faktum erfordert planerische Maßnahmen, für die vollends Werkzeuge und Hilfsmittel fehlen, die zu plausiblen und sicheren Planungsentscheidungen führen. Die Entwicklung solcher Hilfsmittel ist Ziel dieser Forschung. Der Beitrag stellt prototypische Software-Module vor, die sich mit der Problematik der potenziellen Bebaubarkeit einer Grundstücksfläche auseinander setzen. Die Module verarbeiten Regeln, die den einschlägigen Normen und Verordnungen entnommen sind, die bei der Erarbeitung einer Planungslösung eingehalten werden müssen.
Prädiktive Wärmeflussregelung solaroptimierter Wohngebäude - Thermische Simulation komplexer Gebäude
(2003)
Moderne Wohngebäude heute, besonders aber die der Zukunft, werden sich zu einem großen Teil selbst mit Wärme versorgen. Hierbei spielen Entwicklungen im Bereich der Fassadenkonstruktionen eine zentrale Rolle. Zum erhöhten solaren Wärmeeintrag kommen die Eigenschaften der Wärmespeicherung und verzögerten Wärmeabgabe hinzu. Aufgrund dieser Eigenschaften definiert sich das Gebäudeverhalten neu und komplexer. Im Rahmen der Entwicklungen von Wärmeflussregelungen in solarthermisch beheizten Wohngebäuden mit neuartigen Fassaden wird in diesem Beitrag auf die Modellentwicklung moderner Fassadenkonstruktionen hinsichtlich Transparenter Wärmedämmung und Phasenwechselmaterialien im Wandverbund, kombiniert mit der regelungstechnisch interessanten Neuentwicklung von Verschattungseinrichtungen über schaltbare Schichten am Fenster, eingegangen. Der Beitrag beschreibt den Entwurf eines Regelungskonzeptes für die thermische Raumklimaregelung. Diese Untersuchungen basieren auf komplexen Simulationsmodellen, wobei bei der Modellentwicklung der neuartigen Fassadenelemente auf reale Messwerte zurückgegriffen werden konnte.
Die zunehmend erforderliche Kooperation verschiedener Beteiligter unterschiedlicher Fachbereiche und der Einsatz hochspezialisierter Fachapplikationen in heterogenen Systemumgebungen unterstreichen die Bedeutung und Notwendigkeit neuer Konzepte und Möglichkeiten zur Schaffung einer computergestützten Integrationsebene. Ziel einer computergestützten Integrationsebene ist die Verbesserung der Kooperation und Kommunikation unter den Beteiligten. Grundlage dafür ist die Etablierung eines effizienten und fehlerfreien Daten- und Informationsaustausches zwischen den verschiedenen Fachplanern und -applikationen. Die Basis für die Datenintegrationsebene bildet ein digitales Bauwerksmodell im Sinne eines >virtuellen Bauwerks<, welches alle relevanten Daten und Informationen über ein zu planendes oder real existierendes Bauwerk zur Verfügung stellt. Bei der Verwirklichung einer Bauwerksmodell-orientierten Datenintegrationsebene und deren Modellverwaltung erweist sich speziell die Definition des Bauwerksmodells also die Spezifikation der relevanten auszutauschenden Daten als äußerst komplex. Der hier vorzustellende Relationen-orientierte Ansatz, d.h. die Realisierung des Daten- und Informationsaustauschs mittels definierter Relationen und Beziehungen zwischen dynamisch modifizierbaren Domänenmodellen, bietet Ansätze zur: * Verringerung und Beherrschung der Komplexität des Bauwerksmodells (Teilmodellbildung) * Realisierung eines effizienten Datenaustauschs (Relationenmanagement) Somit stellt der Relationenorientierte Ansatz einen adäquaten Lösungsweg zur Modellierung eines digitalen Bauwerksmodells als Datenintegrationsebene für den Lebenszyklus eines Bauwerkes dar.
In current AEC practice client requirements are typically recorded in a building program, which, depending on the building type, covers various aspects from the overall goals, activities and spatial needs to very detailed material and condition requirements. This documentation is used as the starting point of the design process, but as the design progresses, it is usually left aside and changes are made incrementally based on the previous design solution. These incremental small changes can lead to a solution that may no longer meet the original requirements. In addition, design is by nature an iterative process and the proposed solutions often also cause evolution in the client requirements. However, the requirements documentation is usually not updated accordingly. Finding the latest updates and evolution of the requirements from the documentation is very difficult, if not impossible. This process can lead to an end result, which is significantly different from the documented requirements. Some important requirements may not be satisfied, and even if the design process was based on agreed-upon changes in the scope and requirements, differences in the requirements documents and in the completed building can lead to well-justified doubts about the quality of the design and construction process...
The technological processes, schedules, parallel algorithms, etc., having some technological limitations and exacting increases of efficiency of their execution can be described through digraphs, on which the appropriate optimization problem (construction of optimal scheduling of tops of digraph) can be solved. The problems, researched in the given operation, have a generally following statement: The problem 1: Under the given graph G and option value h to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, l). The problem 2: Under the given graph G and option value l to construct parallel scheduling of tops of digraph of minimum width. Let's designate the problem S(G, l, h). The problem 3: Under the given graph G, option value h and periods of execution of operations di, i=1, …, n to construct parallel scheduling of tops of digraph of minimum length. Let's designate the problem S(G, h, di, l). The problems 1,2,3 in a case when h-arbitrary have exponential complexity. In operation the method of solution of the problem S(T, h, di, l) is offered on the basis of choice of tops having greatest weight. The approach to solution of the problem S(G, 3, l) is offered, where G the graph satisfying property : S[i] =S [i], i=1, …, l. For obtaining a rating of width of scheduling on an available estimator of length, we offer to use iterative algorithm of polynomial complexity, on which each step the current value of width of scheduling is set, which is used for specification of length of scheduling.
Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented.
The paper gives the results of scientific research, which, being based on probabilistic and statistical modeling, identifies the relationship of certain socio-economic factors and the number of people killed in road accidents in the Russian Federation regions. It notes the identity of processes in various fields, in which there is loss of life. Scientific methods and techniques were used in the process of data processing and study findings: systematic approach, methods of system analysis (algorithmization, mathematical programming) and mathematical statistics. The scientific novelty lies in the formulation, formalization and solving problems related to the analysis of regional road traffic accidents, its modeling taking into account the factors of socio-economic impact.
In dieser Arbeit wird der Vortriebsprozess einer Erddruckschildmaschine in einem Simulationsmodell mit Hilfe der System Dynamics modelliert. Nach einer Einführung in den maschinellen Tunnelbau werden die Besonderheiten der Erddruckschildmaschine herausgestellt. Anschließend wird das betrachtete System mit dem Simulationskonzept der System Dynamics modelliert und in einem geeigneten Simulationstool implementiert.
Ein simultanes Lösungsverfahren für Fluid-Struktur-Wechselwirkungen aus dem Bereich des Bauingenieurwesens wird vorgestellt. Die Modellierung der Tragwerksdynamik erfolgt mit der geometrisch nichtlinearen Elastizitätstheorie in total Lagrangescher Formulierung. Die Strömung wird mit den inkompressiblen Navier-Stokes-Gleichungen beschrieben. Wenn Turbulenzeffekte massgeblich sind, kommen die Reynolds-Gleichungen in Verbindung mit dem k-omega-Turbulenzmodell von Wilcox zum Einsatz. Zur Beschreibung von komplexen freien Oberflächen wird die Level-Set-Methode eingesetzt. Die einheitliche Diskretisierung von Fluid und Struktur mit der Raum-Zeit-Finite-Element-Methode führt zu einem konsistenten Berechnungsmodell für das gekoppelte System. Da die isoparametrischen Raum-Zeit-Elemente ihre Geometrie in Zeitrichtung ändern können, erlaubt die Methode eine natürliche Beschreibung des infolge der Strukturbewegung zeitveränderlichen Strömungsgebiets. Die gewichtete Integralformulierung der Kopplungsbedingungen mit globalen Freiwerten für die Interface-Spannungen sichert eine konservative Kopplung von Fluid und Struktur. Ausgewählte Anwendungsbeispiele zeigen die Leistungsfähigkeit der entwickelten Methodik und belegen die guten Konvergenzeigenschaften des simultanen Lösungsverfahrens.
The purpose of this study is to develop self-contained methods for obtaining smooth meshes which are compatible with isogeometric analysis (IGA). The study contains three main parts. We start by developing a better understanding of shapes and splines through the study of an image-related problem. Then we proceed towards obtaining smooth volumetric meshes of the given voxel-based images. Finally, we treat the smoothness issue on the multi-patch domains with C1 coupling. Following are the highlights of each part.
First, we present a B-spline convolution method for boundary representation of voxel-based images. We adopt the filtering technique to compute the B-spline coefficients and gradients of the images effectively. We then implement the B-spline convolution for developing a non-rigid images registration method. The proposed method is in some sense of “isoparametric”, for which all the computation is done within the B-splines framework. Particularly, updating the images by using B-spline composition promote smooth transformation map between the images. We show the possible medical applications of our method by applying it for registration of brain images.
Secondly, we develop a self-contained volumetric parametrization method based on the B-splines boundary representation. We aim to convert a given voxel-based data to a matching C1 representation with hierarchical cubic splines. The concept of the osculating circle is employed to enhance the geometric approximation, where it is done by a single template and linear transformations (scaling, translations, and rotations) without the need for solving an optimization problem. Moreover, we use the Laplacian smoothing and refinement techniques to avoid irregular meshes and to improve mesh quality. We show with several examples that the method is capable of handling complex 2D and 3D configurations. In particular, we parametrize the 3D Stanford bunny which contains irregular shapes and voids.
Finally, we propose the B´ezier ordinates approach and splines approach for C1 coupling. In the first approach, the new basis functions are defined in terms of the B´ezier Bernstein polynomials. For the second approach, the new basis is defined as a linear combination of C0 basis functions. The methods are not limited to planar or bilinear mappings. They allow the modeling of solutions to fourth order partial differential equations (PDEs) on complex geometric domains, provided that the given patches are G1
continuous. Both methods have their advantages. In particular, the B´ezier approach offer more degree of freedoms, while the spline approach is more computationally efficient. In addition, we proposed partial degree elevation to overcome the C1-locking issue caused by the over constraining of the solution space. We demonstrate the potential of the resulting C1 basis functions for application in IGA which involve fourth order PDEs such as those appearing in Kirchhoff-Love shell models, Cahn-Hilliard phase field application, and biharmonic problems.
Structural engineering projects are increasingly organized in networked cooperations due to a permanently enlarged competition pressure and a high degree of complexity while performing the concurrent design activities. Software that intends to support such collaborative structural design processes implicates enormous requirements. In the course of our common research work, we analyzed the pros and cons of the application of both the peer-to-peer (University of Bonn) and multiagent architecture style (University of Bochum) within the field of collaborative structural design. In this paper, we join the benefits of both architecture styles in an integrated conceptual approach. We demonstrate the surplus value of the integrated multiagent–peer-to-peer approach by means of an example scenario in which several structural engineers are co-operatively designing the basic structural elements of an arched bridge, applying heterogeneous CAD systems.
The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points.
In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.
The purpose of this paper is to review model for finite element techniques for non-linear crack analysis of reinforced concrete beams and slabs. The non-linear behaviour of concrete and steel were described. Some calculations of >self-stress< for concrete and reinforced concrete beam was made. Current computational aspects are discussed. Several remarks for future studies are also given. The numerical model of the concrete and reinforced concrete was described. The paper shows the results of calculations on a reinforced concrete plane stress panel with cracks. The non-linear, numerical model of calculations of reinforced concrete was assumed. Using finite elements method some calculations were made. The results of calculations like displacements, stresses and cracking are shown on diagrams. They were compared with experimental results and other finding. Some conclusions about the described model and results of calculation are shown.
This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system.
Druckbeanspruchte Bauteile aus Beton können mit zugfesten Umschnürungen von außen verstärkt werden. Mit dieser etablierten Methode konnten axiale Traglast und Duktilität von unzureichend bewehrten Stützen bereits verbessert werden. Es wurde jedoch festgestellt, dass der umschnürte Betonkern dennoch an Festigkeit verliert. Um die Wirksamkeit der Umschnürung zu erhöhen, wird deshalb vorgeschlagen, das umschnürende Material vorzuspannen. Dieser Vorschlag wird insbesondere von der neuen Materialgruppe der Formgedächtnislegierungen inspiriert, die thermisch vorspannbar sind.
Bisher sind die Auswirkungen der Vorspannung einer Umschnürung auf das Tragverhalten von Betondruckgliedern kaum untersucht worden. Diese Lücke wird durch systematische Versuche an Betonzylindern mit vorgespannter Umschnürung aus Stahl und kohlenstofffaserverstärktem Kunststoff geschlossen. Die Abbildung der Versuchsergebnisse durch geeignete Modelle ermöglicht auch Aussagen zum Verhalten von Betondruckgliedern mit Umschnürungen aus anderen Materialien, beispielsweise Formgedächtnislegierungen. Um diese in den Berechnungen zu simulieren, wird eine für das Bauwesen infrage kommende eisenbasierte Legierung in separaten axialen Versuchen charakterisiert und thermisch vorgespannt. Die in der vorliegenden Arbeit entwickelten neuen Modelle orientieren sich im Wesentlichen an zwei Zielen: dem Abbilden des mehraxialen Spannungs-Dehnungs-Verhaltens des vorgespannt umschnürten Betons und dem Berechnen der Restfestigkeit des Betons.
Die durchgeführten Versuche und Parameterstudien auf Basis der Modelle zeigen: Die Vorspannung der Umschnürung beeinflusst vor allem die Restfestigkeit des Betons wesentlich. Die gewonnenen Erkenntnisse und neuen Methoden können eingesetzt werden, um das Tragverhalten von Betondruckgliedern mit Umschnürungen aus Stahl, faserverstärktem Kunststoff oder Formgedächtnislegierungen zu bewerten.
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells für das computergestützte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale Übersicht zu verlieren oder entsprechende räumliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterstützt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberflächen
Für die Gestaltung einer durchgängigen Unterstützung des Entwurfsprozesses stehen gegenwärtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repräsentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen berücksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. Für ein echtes CADesign bildet dessen Klärung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise ähnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivitäten ergeben sich für: die Systematisierung computergestützter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsfähigen UNDO- bzw. TMS-Mechanismen.
This study aims at constructing the simulation system of distribution patterns of solar irradiance, sunshine duration and sky factor with the user-friendly interface and sharing this system with users on the Internet. The characteristics of this simulation system are as follows: (1) Web-based user interface, (2) Accessible system through the Internet and (3) Sunlight and skylight simulation based on physically accurate equations with considering various sky conditions and the reflection from the surface of objects. As a case study, impact of the development plans are analyzed and evaluated using this system. Solar irradiance, sunshine duration and sky factor are calculated at the surface of the buildings and open spaces every 10 minutes from 8 to 16 on the winter solstice. The values of these indices are expressed as the ratio to those calculated under the condition with no buildings. In conclusion, this web-based simulation system can be useful for visualizing the sunlight and skylight conditions on outdoor open spaces and the surface of the buildings to evaluate development plans objectively. Users can make access to the system from almost all of the computers connected with the Internet and modify parameters by themselves to get desirable results. Further improvement of the user interface is necessary using more advanced technology of CGI, Java and JavaScript.
The availability of the WWW technology and the introduction of the Internet as basic resource like water, electricity or gas changes dramatically normal live, business and of course civil engineering. New technologies enable innovative technical solutions and offer new potential for improvements towards support of humans nature appropriate ways of working. This demands a new culture of work and collaboration. To contribute to theses challenges is a matter the discipline 'Bauinformatik' by supporting related research, development, education and training in civil engineering. This contribution to the IKM Conference 2000 in Weimar sketches selected research and education activities of the institutes of the authors on the topics of WWW based simulation systems (example WEASEL) and of WWW based project platforms (projects MorWin and TaiGer as well as an European education experiment). Both topics supports the collaboration by new ways of tele cooperation in international, heterogeneous and interdisciplinary engineering. Demonstration from this developments and projects will be used to illustrate the dimension of changes in civil engineering in due to modern ICT.