Filtern
Dokumenttyp
- Konferenzveröffentlichung (336) (entfernen)
Institut
- Professur Informatik im Bauwesen (336) (entfernen)
Schlagworte
- Modellierung (49)
- Bauwerk (39)
- Verteiltes System (36)
- CAD (31)
- Finite-Elemente-Methode (24)
- Architektur (21)
- Computerunterstütztes Verfahren (21)
- Baubetrieb (17)
- Ingenieurbau (17)
- Internet (17)
Recent research shows that current learning strategies in construction industry have not been effective in implementing lean principles in construction. With that in mind the researchers set to investigate an alternative learning strategy in order to promote learning at the international level. A web-based environment, was developed for this project with the intent of promoting learning and knowledge exchange on the theory and practice of "process transparency" across different countries.
The promise of lower costs for sensors that can be used for construction inspection means that inspectors will continue to have new choices to consider in creating inspection plans. However, these emerging inspection methods can require different activities, resources, and decisions such that it can be difficult to compare the emerging methods with other methods that satisfy the same inspection needs. Furthermore, the context in which inspection is performed can significantly influence how well certain inspection methods are suited for a given set of goals for inspection. Context information, such as weather, security, and the regulatory environment, can be used to understand what information about a component should be collected and how an inspection should be performed. The research described in this paper is aimed at developing an approach for comparing and selecting inspection plans. This approach consists of (1) refinement of given goals for inspection, if necessary, in order to address any additional information needs due to a given context and in order to reach a level of detail that can be addressed by an inspection activity; (2) development of constraints to describe how an inspection should be achieved; (3) matching of goals to available inspection methods, and generation of activities and resource plans in order to address the goals; and (4) selection of an inspection plan from among the possible plans that have been identified. The authors illustrate this approach with observations made at a local construction site.
The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality.
Im Rahmen des Sonderforschungsbereiches 524 <Werkstoffe und Konstruktionen für die Revitalisierung von Bauwerken 1> ist das primäre Anliegen des Teilprojektes D2 <Bauplanungsrelevantes digitales Gebäudeaufnahme- und Informationssystem> die Entwicklung von Methoden und Techniken zur Aufnahme von Bestandsdaten vor Ort oder durch Auswertung vorhandener Dokumentationen und deren direkte Integration in ein Bauwerksmodell. [15] Das Vorhaben erarbeitet Grundlagen zu Aspekten der fachplanerischen Nutzung und der wissenschaftlichen Auswertungen arbeitsmethodischer Vorgehensweisen in der Bestandsaufnahme unter Einbeziehung softwaretechnischer Methoden. Dabei finden Sachverhalte der Strukturierung, die Herausarbeitung von Systematiken der wesentlichen Informations-/Datenmengen, die Ableitung von Methoden zur zerstörungsfreien Erfassung und die Darstellung planungsrelevanter Gebäudeinformationen in digitalen Systemen Berücksichtigung. Beim Bauaufmaß werden neben traditionellen Methoden und Techniken längst geodätische Verfahren wie die Tachymetrie, die Photogrammetrie und die Handlaserentfernungsmessung einbezogen. In der Praxis des Bestandsaufmaßes repräsentiert gegenwärtig die Tachymetrie, das am häufigsten zur Innen- und Außenaufnahme von Gebäuden eingesetzte geodätische Vermessungsverfahren. [9] [3] Ausgehend von der heutigen Situation in der Bestandsaufnahme wird aufgezeigt, inwieweit es nach dem gegenwärtigen Stand der Technik möglich ist, die in der Geodäsie verwendeten Tachymeter direkt in der Bestandsaufnahme einzusetzen. In einem weiteren Schwerpunkt wird die Konzeption eines rechnergestützten Bauaufnahmesystems basierend auf reflektorlos messenden tachymetrischen Geräten beschrieben. Das Konzept berücksichtigt nicht nur das Bauaufmaß, sondern unterstützt adäquat den gesamten Prozeß der Bauaufnahme – von der Erstbegehung bis hin zur konstruktiven Gliederung. Abschließend werden tendenzielle Möglichkeiten in der Bauaufnahme diskutiert.
Die heutige Situation in der Tragwerksplanung ist durch das kooperative Zusammenwirken einer größeren Anzahl von Fachleuten verschiedener Disziplinen (Architektur, Tragwerksplanung, etc.) in zeitlich befristeten Projektgemeinschaften gekennzeichnet. Bei der Abstimmung der hierdurch bedingten komplexen, dynamischen und vernetzten Planungsprozesse kommt es dabei häufig zu Planungsmängeln und Qualitätseinbußen. Dieser Artikel zeigt auf, wie mit Hilfe der Agententechnologie Lösungsansätze zur Verbesserung der Planungssituation erreicht werden können. Hierzu wird ein Agentenmodell für die vernetzt-kooperative Tragwerksplanung vorgestellt und anhand der Planung einer Fußgängerbogenbrücke anschaulich demonstriert. Das Agentenmodell erfasst (1) die beteiligten Fachplaner und Organisationen, (2) die tragwerksspezifischen Planungsprozesse, (3) die zugehörigen (Teil-)Produktmodelle und (4) die genutzte (Ingenieur-)Software. Hieraus leiten sich die drei Teilmodelle (1) agentenbasiertes Kooperationsmodell, (2) agentenbasierte Produktmodellintegration und (3) Modell zur agentenbasierten Software-Integration ab. Der Fokus des Artikels liegt auf der Darstellung des agentenbasierten Kooperationsmodells.
This ethnographic study reports on emerging work processes and practices observed in the AEC (Architecture/Engineering/Construction) Global Teamwork program, i.e., what people experience when interacting with and through collaboration technologies, why people practice in the way they do, how the practice fits into the environment and changes the work patterns. It presents the experience of two high-performance typical but extreme AEC teamwork cases adopting and adapting to collaboration technologies and how these technologies in practice impact their work processes. The findings illustrate the importance of collaboration technologies in cross-disciplinary, global teamwork. Observations indicate that high performance teams that use the collaboration technologies effectively exhibit collaboration readiness at an early stage and manage to define a “third way” to meet the demands of the cross-disciplinary, multi cultural and geographically distributed AEC workspace. The observations and implications represent the blueprint for yearly innovations and improvements to the design of the AEC Global Teamwork program.
Seit die Datenverarbeitung in ihrer Komplexität sich der Thematik des Computer Integrated Manufacturing widmet gehört die Produktionsplanung und Steuerung zu jenen Bereichen, in denen eine Computerunterstützung am vordringlichsten erschien. Später sind betriebswirtschaftliche Gesamtlösungen entstanden, die (bis heute recht unpräzise) als Enterprise Resource Planning (ERP)-Systeme bezeichnet werden und in ihren Logistik-Modulen auch Funktionen der Produktionsplanung abdecken. Alle bekannten MRP-, PPS- und auch ERP-Systeme beruhen auf einer Sukzessivplanung. Advanced Planning and Scheduling (APS) Systems finden seit etwa 1995 zunehmend Interesse. Neben Demand Planning, Production Planning and Scheduling, Distribution Planning, Transportation Planning und Supply Chain Planning werden Lösungen für Anzahl und Standorte von Produktionsstätten und Auslieferungslagern, Zuordnung zu Produktionsstätten, Kapazitätsbestimmung für Arbeitskräfte und Betriebsmittel je Standort, Lagerhaltung je Teil und Lager, Bestimmung benötigter Transportmittel und Häufigkeit ihres Einsatzes, Zuordnung von Lagern zu Produktionsstätten von Märkten zu Lagern u.a.m. von APS-Systemen erwartet. D.h. APS-Systeme ergänzen ERP-Lösungen, nutzen die bereits durch das ERP-System vorhandenen Daten und benötigen neuartige Algorithmen und (Meta-) Heuristiken. Im Rahmen des Vortrages werden Modelle und Echtzeitalgorithmen zur Optimierung der Logistik für Prozesse mit kurzfristigen Anforderungen, geographisch verteilter Produktion, Lagerhaltung der Ausgangs-, Zwischen- und Endprodukte und wechselnden Transport-Bedingungen aus der Sicht der praktischen Umsetzung und Anwendung in Form einer ASP-Lösung aufgezeigt und diskutiert.
Der Beitrag basiert auf den Ansätzen und Ergebnissen des Forschungsprojekts >Prozessorientierte Vernetzung von Ingenieurplanungen am Beispiel der Geotechnik<, das im Rahmen des Schwerpunktprogramms 1103 >Vernetzt-kooperative Planungsprozesse im Konstruktiven Ingenieurbau< von der DFG gefördert wird. Ziel des gemeinsam mit dem Institut für Numerische Methoden und Informatik im Bauwesen an der TU Darmstadt durchgeführten Forschungsprojekts ist die Entwicklung einer netzwerkbasierten Kooperationsplattform zur Unterstützung von geotechnischen Ingenieurplanungen. Daher konzentriert sich das Forschungsprojekt auf die Abbildung und Koordination der Planungsprozesse für Projekte des Konstruktiven Ingenieurbaus vor dem Hintergrund der stark arbeitsteiligen Projektbearbeitung in einer verteilten Rechnerumgebung. Der Beitrag stellt die Abstraktion von Prozessmustern im Bauplanungsprozess als Basis für die dynamische Prozessmodellierung in einem Kooperationsmodell dar. Ziel ist es, durch die Identifikation der mit dem Entwurf und der Dimensionierung eines Bauteils verbundenen Planungs- und Abstimmungsprozesse einen bauteilbezogenen Katalog von Prozessmustern zu abstrahieren. Die einzelnen Prozessmuster werden in jedem Bauplanungsprozess dynamisch über geeignete Kopplungsmechanismen in das aktuelle Prozessmodell integriert, so dass die für den Bauplanungsprozess typischen Veränderungen der Konstruktion und der Zusammensetzung des Planungsteams im Prozessmodell berücksichtigt werden können. Dazu werden im Beitrag die bisherigen Ergebnisse der Analyse des Planungsprozesses eines großen innerstädtischen Bauvorhabens, das als Referenzobjekt dient, sowie typischer Planungsszenarien in der Geotechnik vorgestellt. Anschließend werden Grundlagen und methodische Ansätze zur Modellierung von Prozessen mit der Methode der farbigen Petri-Netze mit individuellen Marken vorgestellt. Anhand von Beispielen für bauteilorientierte Prozessmuster wird die Funktionalität der Prozessmuster in sich und im gegenseitigen Zusammenspiel erläutert
The paper presents the abstraction of process relevant information in order to enable the workflow management based on semantic data. It is shown for three examples, how the standards define the information needed to perform a certain planning activity. Abstraction of process relevant information is discussed for different granularities of the underlying processmodel. As one possible application ProMiSE is introduced, which uses process relevant data in individual tokens in a petri-net based process-model.
The AEC industry is conscious of the potentials arising from the usage of mobile computer systems to increase productivity by streamlining their business processes. Discussions are no longer on whether or not to use a mobile computer solution, but rather, on how it should be used. However, the implantation process of this new technology in Architecture, Engineering and Construction (AEC) and Facility Management (FM) practise is very slow and should be improved. One way to encourage and ease the usage of mobile computer systems in AEC is a more process-oriented usability and context appropriateness of mobile computer solutions. Context-sensitivity is defined as a crucial feature to be taken into account for further research in the area of Mobile Computing. Context-sensitive, mobile IT-solutions depend on two features: (1) flexible definitions of (construction) processes describing the context and (2) tools for flexible, multi-dimensional information management representing the context. It is on this premise that the authors propose the n-dimensional data management approach for the implementation of mobile computing solutions. In this paper, we analyse working scenarios in the AEC and FM sector, defining context aspects which are transformed and formalized as dimension hierarchies of the envisaged context model.
Objektorientierte Anwendungen aus dem Ingenieurwesen bestehen aus strukturierten Mengen, deren Elemente Objekte sind. Zwischen den Objekten bestehen vielfältige Abhängigkeiten. Die Beziehungen sind zur Zeit der Entwicklung einer Anwendung nur teilweise bekannt. Beziehungen zwischen Objekten müssen deshalb auch zur Laufzeit der Anwendung erzeugt und gelöscht werden können. Aufgrund des hohen Rechenaufwandes wird die Objektbasis einer Anwendung verzögert aktualisiert. Eine objektorientierte Anwendung wird auf Grundlage der Systemtheorie als System formal beschrieben. Als Elemente des Systems werden Attribute, Objekte und Objektmengen eingeführt. Die in den Methoden der Objekte implementierten Algorithmen bestimmen die Bindungsrelation des Systems. Auf Grundlage der Graphentheorie wird die Reihenfolge der Aktualisierung der Objektbasis berechnet. ...
This paper is concerned with the numerical treatment of quasilinear elliptic partial differential equations. In order to solve the given equation we propose to use a Galerkin approach, but, in contrast to conventional finite element discretizations, we work with trial spaces that, not only exhibit the usual approximation and good localization properties, but, in addition, lead to expansions of any element in the underlying Hilbert spaces in terms in multiscale or wavelet bases with certain stability properties. Specifically, we select as trial spaces a nested sequence of spaces from an appropriate biorthogonal multiscale analysis. This gives rise to a nonlinear discretized system. To overcome the problems of nonlinearity, we make use of the machinery of interpolating wavelets to obtain knot oriented quadrature rules. Finally, Newton's method is applied to approximate the solution in the given ansatz space. The results of some numerical experiments with different biorthogonal systems, confirming the applicability of our scheme, are presented.
The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment.
The development of a life cycle structured cooperation platform is described, which is based on an integrated process and goal-oriented project model. Furthermore the structure of a life cycle oriented object structure model and its implementation in the platform are documented. The complete conceptual model is described, which represents the basis of a lifecycle -oriented structuring of the planning object and supports the thematic classification of the object and project management data.
The construction industry is a supportive industry in China. IT (information technolgy), including computer technology and communication technology, as a whole is regarded as the most important means to upgrade the construction industry so that research projects were organized by Chinese government to further the application of IT in the construction industry. This study originated from one of the projects and is aimed at grasping the general situation on the application of IT in the construction industry. A questionnaire was designed for the survey, which used stratified proportional sampling method, and was carried out under the help of a government agency. This study can not only provide sound foundation for the government to make relative policies, but also reveal references for the firms in construction industry to apply IT in their business. This paper presents the preliminary result of the survey.
As computer programs become ever more complex, software development has shifted from focusing on programming towards focusing on integration. This paper describes a simulation access language (SimAL) that can be used to access and compose software applications over the Internet. Specifically, the framework is developed for the integration of tools for project management applications. The infrastructure allows users to specify and to use existing heterogeneous tools (e.g., Microsoft Project, Microsoft Excel, Primavera Project Planner, and AutoCAD) for simulation of project scenarios. This paper describes the components of the SimAL language and the implementation efforts required in the development of the SimAL framework. An illustration example bringing on-line weather forecasting service for project scheduling and management applications is provided to demonstrate the use of the simulation language and the infrastructure framework.
To fulfil safety requirements the changes in the static and/or dynamic behaviour of the structure must be analysed with great care. These changes are often caused by local reduction of the stiffness of the structure caused by the irregularities in the structure, as for example cracks. In simple structures such analysis can be performed directly, by solving equations of motion, but for more complex structures a different approach, usually numerical, must be applied. The problem of crack implementation into the structure behaviour has been studied by many authors who have usually modelled the crack as a massless rotational spring of suitable stiffness placed at the beam at the location where the crack occurs. Recently, the numerical procedure for the computation of the stiffness matrix for a beam element with a single transverse crack has been replaced with the element stiffness matrix written in fully symbolic form. A detailed comparison of the results obtained by using 200 2D finite elements with those obtained with a single cracked beam element has confirmed the usefulness of such element.
In recent years, the survey is performed for repair, such as a bridge and a building built in past, spending great expense. And it is anxious for the survey technique that doesn’t need cost and time more. Then, we made an idea of the technique of precise 3D model creation by 2D pictures. However, the technique of performing the improvement in accuracy of convergent photographing and automatic acquisition of corresponding points was not established. Therefore, in this research, we try to obtain a semi-automation of corresponding points acquisition from initial corresponding points and the improvement in accuracy of convergent photographing. Moreover, we applied the research to the used house of Japanese real estate, and the applicable field was selected as the high needs of the residence of 3D model. And we developed the system that everyone could create Web / 3D model house by VRML easily without requiring expensive apparatuses or expertise.
We present a software prototype for fluid flow problems in civil engineering, which combines essential features of Computational Steering approaches with efficient methods for model transfer and high performance computing. The main components of the system are described: - The modeler with a focus on the data management of the product model - The pre-processing and the post-processing toolkit - The simulation kernel based on the Lattice Boltzmann method - The required hardware for real-time computing
The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes.
In many engineering applications two or more different interacting systems require the numer-ical solution of so-called multifield problems. In civil engineering the interaction of fluid and structures plays an important role, i.e. for fabric tensile structures of light and flexible materials often used for large roof systems, capacious umbrellas or canopies. Whereas powerful numerical simulation techniques have been established in structural engineering as well as in fluid mechan-ics, only relatively few approaches to simulate the interaction of fluids with civil engineering constructions have been presented. To determine the wind loads on complex structures, it is still state-of-the-art to apply semi-empirical, strongly simplifying methods or to perform expensive ex-periments in wind tunnels. In this paper an approach of a coupled fluid-structure simulation will be presented for membrane and thin shell structures. The interaction is described by the struc-tural deformation as response to wind forces, resulting in a modification of the fluid flow domain. Besides a realistic determination of the wind loads, information on the structural stability can be obtained. The so-called partitioned solution is based on an iterative frame algorithm, integrating different codes for Computational Fluid Dynamics (CFD) and for Computational Structural Dy-namics (CSD) in an explicit or an implicit time-stepping procedure. All data exchange between the two different applications is performed via a neutral geometric model provided by a coupling interface. A conservative interpolation method is used for the interpolation of the nodal loads. The time-dependent motion of the structure requires a dynamic modification of the different grids and a redefinition of the Navier-Stokes equations in an Arbitrary Langrangian Eulerian (ALE) formulation. As an example for the present implementation, results of a coupled fluid-structure simulation for a textile membrane canopy will be presented.
The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ...
The paper is about model based parameter identification and damage localization of elastomechanical systems using input and output measurements in the frequency domain. An adaptation of the Projective Input Residual Method to subsystem damage identification is presented. For this purpose the projected residuals were adapted with respect to a given subsystem to be analysed. Based on the gradients of these projected subsystem residuals a damage indicator was introduced which is sensitive to parameter changes and structural damages in this subsystem. Since the computations are done w.r.t. the smaller dimension of a subsystem this indicator shows a computational performance gain compared to the non-subsystem approach. This gain in efficiency makes the indicator applicable in online-monitoring and online-damage-diagnosis where continuous and fast data processing is required. The presented application of the indicator to a gantry robot could illustrate the ability of the indicator to indicate and locate real damage of a complex structure. Since in civil engineering applications the system input is often unknown, further investigations will focus on the output-only case since the generalization of the presented methods to this case will broaden its application spectrum.
For the analysis of arbitrary, by Finite Elements discretized shell structures, an efficient numerical simulation strategy with quadratic convergence including geometrically and physically nonlinear effects will be presented. In the beginning, a Finite-Rotation shell theory allowing constant shear deformations across the shell thickness is given in an isoparametric formulation. The assumed-strain concept enables the derivation of a locking-free finite element. The Layered Approach will be applied to ensure a sufficiently precise prediction of the propagation of plastic zones even throughout the shell thickness. The Riks-Wempner-Wessels global iteration scheme will be enhanced by a Line-Search procedure to ensure the tracing of nonlinear deformation paths with rather great load steps even in the post-peak range. The elastic-plastic material model includes isotropic hardening. A new Operator-Split return algorithm ensures considerably exact solution of the initial-value problem even for greater load steps. The combination with consistently linearized constitutive equations ensures quadratic convergence in a close neighbourhood to the exact solution. Finally, several examples will demonstrate accuracy and numerical efficiency of the developed algorithm.
This paper focuses on a new three-level discretisation strategy which enables the transition between continuum/structural (I) and structural/black box modelling (II). The transition (I) is realised by means of a model adaptive concept based on an innovative finite element technology. For transition (II) we apply the truncated balanced realisation method (TBR). The latter represents an established system theoretical model reduction technique which is here combined with a novel substructure technique. The approach provides a modular concept to facilitate the computational analysis of complex structures. The final goal is to apply the strategy to life time estimation.
A geometrical inclusion-matrix model for the finite element analysis of concrete at multiple scales
(2003)
This paper introduces a method to generate adequate inclusion-matrix geometries of concrete in two and three dimensions, which are independent of any specific numerical discretization. The article starts with an analysis on shapes of natural aggregates and discusses corresponding mathematical realizations. As a first prototype a two-dimensional generation of a mesoscale model is introduced. Particle size distribution functions are analysed and prepared for simulating an adequate three-dimensional representation of the aggregates within a concrete structure. A sample geometry of a three-dimensional test cube is generated and the finite element analysis of its heterogeneous geometry by a uniform mesh is presented. Concluding, aspects of a multiscale analysis are discussed and possible enhancements are proposed.
This paper describes a framework for computer-aided conceptual design of building structures that results from building architectural considerations. The central task that is carried out during conceptual design is the synthesis of the structural system. This paper proposes a methodology for the synthesis of structural solutions. Given the nature of architectural constraints, user-model interactivity is devised as the most suitable computer methodology for driving the structural synthesis process. Taking advantage of the hierarchical organization of the structural system, this research proposes a top-down approach for structural synthesis. Through hierarchical refinement, the approach lends itself to the synthesis of global and local structural solutions. The components required for implementing the proposed methodology are briefly described. The main components have been incorporated in a proof-of-concept prototype that is being tested and validated with actual buildings.
Iso-parametric finite elements with linear shape functions show in general a too stiff element behavior, called locking. By the investigation of structural parts under bending loading the so-called shear locking appears, because these elements can not reproduce pure bending modes. Many studies dealt with the locking problem and a number of methods to avoid the undesirable effects have been developed. Two well known methods are the >Assumed Natural Strain< (ANS) method and the >Enhanced Assumed Strain< (EAS) method. In this study the EAS method is applied to a four-node plane element with four EAS-parameters. The paper will describe the well-known linear formulation, its extension to nonlinear materials and the modeling of material uncertainties with random fields. For nonlinear material behavior the EAS parameters can not be determined directly. Here the problem is solved by using an internal iteration at the element level, which is much more efficient and stable than the determination via a global iteration. To verify the deterministic element behavior the results of common test examples are presented for linear and nonlinear materials. The modeling of material uncertainties is done by point-discretized random fields. To show the applicability of the element for stochastic finite element calculations Latin Hypercube Sampling was applied to investigate the stochastic hardening behavior of a cantilever beam with nonlinear material. The enhanced linear element can be applied as an alternative to higher-order finite elements where more nodes are necessary. The presented element formulation can be used in a similar manner to improve stochastic linear solid elements.
Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information.
The methods currently used for scheduling building processes have some major advantages as well as disadvantages. The main advantages are the arrangement of the tasks of a project in a clear, easily readable form and the calculation of valuable information like critical paths. The main disadvantage on the other hand is the inflexibility of the model caused by the modeling paradigms. Small changes of the modeled information strongly influence the whole model and lead to the need to change many more details in the plan. In this article an approach is introduced allowing the creation of more flexible schedules. It aims towards a more robust model that lowers the need to change more than a few information while being able to calculate the important propositions of the known models and leading to further valuable conclusions.
The purpose of this research is to develop the method to retrieve a building name from the impression of the building. First, the images of the building are registered as database by the questionnaire. Next, the images of the objective building are compared with the degree of matching in image databases, and the building with high synthetic matching degree is retrieved. This system could get a good retrieval result. Moreover, image processing was done, and image databases are trained by neural network from the amount of characteristics of the image, and the retrieval system by image processing was examined.
The research of the best building design requires a concerted design approach of both structure and foundation. Our work is an application of this approach. Our objective is also to create an interactive tool, which will be able to define, at the early design stages, the orientations of structure and foundation systems that satisfy as well as possible the client and the architect. If the concerns of these two actors are primarily technical and economical, they also wish to apprehend the environmental and social dimensions of their projects. Thus, this approach bases on alternative studies and on a multi-criterion analysis. In this paper, we present the context of our work, the problem formulation, which allows a concerted design of Structure and Foundation systems and the feasible solutions identifying process.
The evolution of data exchange and integration standards within the Architectural, Engineering and Construction industry is gradually making the long-held vision of computer-integratedconstruction a reality. The Industry Foundations Classes and CIMSteel Integration Standards are two such standards that have seen remarkable successes over the past few years. Despite successes, these standards support the exchange of product data more than they do process data, especially those processes that are loosely coupled with product models. This paper reports on on-going research to evaluate the adequacy of the IFC and CIS/2 standards to support process modeling in the steel supply chain. Some initial recommendations are made regarding enhancements to the data standards to better support processes.
30. Forum Bauinformatik
(2018)
Die Bauhaus-Universität Weimar ist seit langer Zeit mit dem Forum Bauinformatik eng verbunden. So wurde die Veranstaltung 1989 hier durch den Arbeitskreis Bauinformatik ins Leben gerufen und auch das 10. und 18. Forum Bauinformatik (1998 bzw. 2006) fand in Weimar statt. In diesem Jahr freuen wir uns daher besonders, das 30. Jubiläum an der Bauhaus-Universität Weimar ausrichten zu dürfen und viele interessierte Wissenschaftler und Wissenschaftlerinnen aus dem Bereich der Bauinformatik in Weimar willkommen zu heißen.
Das Forum Bauinformatik hat sich längst zu einem festen Bestandteil der Bauinformatik im deutschsprachigen Raum entwickelt. Dabei steht es traditionsgemäß unter dem Motto „von jungen Forschenden für junge Forschende“, wodurch insbesondere Nachwuchswissenschaftlerinnen und ‑wissenschaftlern die Möglichkeit geboten wird, ihre Forschungsarbeiten zu präsentieren, Problemstellungen fachspezifisch zu diskutieren und sich über den neuesten Stand der Forschung zu informieren. Zudem wird eine ausgezeichnete Gelegenheit geboten, in die wissenschaftliche Gemeinschaft im Bereich der Bauinformatik einzusteigen und Kontakte mit anderen Forschenden zu knüpfen.
In diesem Jahr erhielten wir 49 interessante und qualitativ hochwertige Beiträge vor allem in den Themenbereichen Simulation, Modellierung, Informationsverwaltung, Geoinformatik, Structural Health Monitoring, Visualisierung, Verkehrssimulation und Optimierung. Dafür möchten wir uns ganz besonders bei allen Autoren, Co-Autoren und Reviewern bedanken, die durch ihr Engagement das diesjährige Forum Bauinformatik erst möglich gemacht haben. Wir danken zudem Professor Große und Professor Díaz für die Unterstützung bei der Auswahl der Beiträge für die Best Paper Awards.
Ein herzliches Dankeschön geht an die Kollegen an der Professur Informatik im Bauwesen der Bauhaus-Universität Weimar für die organisatorische, technische und beratende Unterstützung während der Planung der Veranstaltung.
Die Sicherung der Wettbewerbsfähigkeit im Bereich des Bauwesens, insbesondere kleinerer und mittelständischer Betriebe erfordert ein aktives Handeln als Antwort auf die sich ändernde Wettbewerbssituation. Einen wesentlichen Wettbewerbsvorteil können kleine unternehmerische Einheiten durch höhere Flexibilität, schnelle Reaktion auf Kundenwünsche oder aktuelle Situationen auf der Baustelle und Marktnähe erreichen. Dazu ist es nötig, die Informations- und Kommunikationsströme durch Einsatz standardisierter und kostengünstiger Hard- und Software wie z.B. Handhelds zu unterstützen und insbesondere die existierenden Hindernisse im Informationsfluss zwischen Baustelle und Büro zu beseitigen. Am Beispiel der Projekte >IuK - SystemBau< und >eSharing< wird eine Einführungsstrategie für >Mobile Computing< in kleinen unternehmerischen Einheiten des Bauwesens (KMU) basierend auf einer umfangreichen Anforderungsanalyse vorgestellt. Folgende Aspekte sollen beschrieben werden: durchgängiger Einsatz der Technik unter Beachtung der verschiedenen Qualifikationsniveaus, Einführungsunterstützung durch Schulungen, Prozessanalyse und mögliche Integration in bestehende Software-Umgebungen sowie Feldtests.
>CyberCity< ist ein Konzept, das durch ein virtuelles Abbild der räumlichen Realität einer Stadt (Berlin) eine uns bekannte Wahrnehmungsumgebung als Orientierungs- und Navigationserleichterung bereitstellt, um über diesen virtuellen Browser möglichst schnell und anschaulich an eine gewünschte Information zu kommen. Dieses Umgebungsmodell ist auch als Simulationsmodell für die Visualisierung stadträumlicher Beurteilungen neuer Projekte, verkehrstechnischer Massnahmen und ökologischer Belastungen geeignet. Insbesondere ist es als Orientierungsumgebung für die Telepräsenz über die Kommunikationsnetze gedacht, die über die virtuellen Repräsentanten (Avatare) eine besondere gesellschaftliche Brisanz erhält.