Refine
Document Type
- Doctoral Thesis (494) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (14)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
Since the end of the 1950s, Italy has focused part of its modernization on the erection of public works. Due to corruption, mafia, and further malpractice, this form of development has occasionally failed, producing a high number of constructions that have remained unfinished for decades. In 2007, the group of artists Alterazioni Video constructed an informal survey in the form of an on-line tool open to public contributions, which revealed that there are 395 unfinished public works in Italy from which 156, approximately 39.5%, are located in Sicily alone. In view of such a statistic, Alterazioni Video opted to coin the term ‘Incompiuto Siciliano’ – literally ‘Sicilian Incompletion’ – to refer to unfinished public works as a formal architectural style. This re-interpretation, which aims to convey the recovered dignity of these ‘modern ruins’, considers unfinished public works a type of heritage with the potential to represent the entirety of Italian society. Furthermore, it goes as far as to say an unfinished public work is ‘Incompiuto Siciliano’ despite being located in another of the Italian regions.
This doctoral dissertation embraces the artists’ argument to develop a complete study of Incompiuto Siciliano by embedding this architectural style/artistic project within the main debates on modern ruins at present. This is important because it is expected to contribute to the revalorization and eventual recommissioning of unfinished sites by validating Incompiuto Siciliano in the realm of academia. Furthermore, this work aspires to be a worthwhile source of information for future investigations dealing with cultural interpretations of incompletion in any other context – a not unreasonable goal considering how unfinished works are one of the key urban topics after the 2008 financial crisis. Hence, this doctoral dissertation uses Incompiuto Siciliano to discuss a different perspective in each of the five chapters and, though these can be read as independent contributions, the objective is that all chapters read together, form a clear, concise, continuous unit. And so it must be said this is not a dissertation about unfinished public works in Italy; this is a dissertation about Incompiuto Siciliano as an artistic response to unfinished public works in Italy – which clearly requires an interdisciplinary analysis involving Urban Studies, Cultural Geography, Contemporary Archaeology, Critical Heritage and Visual Arts.
The research examines the system of strategic and territorial planning of St. Petersburg focusing on Lomonosov (Oranienbaum) as its case study. The study provides the analysis of the planning documentation developed for the city in the post-Soviet period. In particular, it elaborates on the currently enforced Strategy of Economic and Social Development of St. Petersburg-2030 (2014) and the City General Plan (2005), discussing the aspects of their development and implementation, as well as complex interrelation.
Thereby, peculiarities of the spatial development of the St. Petersburg agglomeration are also investigated, elaborating on the state policy on agglomerations, historic development of St. Petersburg and relations with the Leningrad Region, governance and imbalances of the St. Petersburg spatial development, including proposed development scenarios.
Consequently, the study employs a highly indicative case of the Lomonosov town municipal unit aiming to illustrate the practical implementation of administrative, territorial and strategic policies in a given context within a system of the state planning adopted in St. Petersburg, in particular, taking into consideration recently proclaimed necessity for the transition to a polycentric city model following an innovative scenario for the socioeconomic and spatial development.
In particular, Lomonosov (Oranienbaum) is explored egarding its current socio-economic situation and development scenarios: industrial site and cultural tourism. The Oranienbaum museum and nature-reserve is also thoroughly assessed with regard to its cultural tourism potential.
Finally, the urban environment of Lomonosov (Oranienbaum) is comprehensively scrutinized in terms of its historic development, residential housing typology, UNESCO World Heritage preservation and local urban heritage. In conclusion, the data on Lomonosov present in the St. Petersburg strategic and territorial planning documents is provided.
This project proposes and applies a research strategy to understand types of cities using the case study of Bogotá. This strategy combines a conceptual framework developed around the notion of ‘centrality’ and ‘urban semiotics’ as a method of qualitative enquiry in order to comprehend complex spatial arrangements as significant constituents of cultural geographies. In this sense, this study problematizes current tendencies such as spatial fragmentation and challenges the argument that contemporary urban ensembles in Latin America are either homogenized within globalization trends or illegible entities with no structural coherence.
Bogotá is addressed as an instrumental case study to redraw generalizations developed from different methodological frameworks about the configuration process of spatial structures and their significance within the Latin American geography. Thus the study questions how urban centrality has evolved as an essential socio-cultural phenomenon and in this manner decodes the messages transmitted by main spatial arrangements. As a first step, the study discusses the construction of spatial meaning and its structural interpretation. In addition, the concept of centrality is examined in depth and an urban centrality typology is introduced to enable the analysis of spatial structures in socio-cultural terms. These contents are followed by the discussion of the existing approaches to the topic and their limitations. Subsequently, this research reconstructs the configuration of Bogotá’s spatial structure which is decoded in the last chapter.
The study concludes that the highly fragmented and uneven condition of urban space in Latin America can be read. The case study of Bogotá substantiates that there is a code that paradoxically provides spatial cohesiveness within unstable socio-spatial hierarchies. Such a spatial code is deciphered through the reading of Bogotá’s spatial structure whose super-centre denotes ‘the sacralisation of authoritarianism’. This is a ‘structural meaning’ related to a specific or intrinsic logic of spatial concentration that is useful for the further discussion of socio-spatial patterns and the meanings of Latin American cities. The concluding remarks integrate the main arguments and outline lines of action in spatial planning processes.
The construction and operation of a sanitary landfill (SLF) in the Philippines presents concerns on the regulation of the activities of the informal sector in the area. In anticipation of these directives, an association of informal waste reclaimers group called Uswag Calajunan Livelihood Association, Inc. (UCLA) was formed in May 2009. One option identified was the waste-to-energy activity through the production of fuel briquettes. With the availability of raw materials in the area, what was lacking then was an appropriate technology that would cater to their needs. This study, therefore, presented the case of UCLA on how socio-economic and technical aspects was integrated for the development and improvement of a briquetting technology needed in the production of quality briquettes as part of their income generating activities. A non-experimental posttest only design was utilized for the collection of descriptive information. Descriptions and discussions were also made on the enhancement of the briquetting machine from the first hand-press molder developed until the finalized design was attained.
Results revealed that the improved briquetting technology withstood the wear and tear of operation showing a significant (P<0.01) increase on the production rate (220 pcs/hr; 4 kg/hr) and bulk density (444.83 kg/m3) of briquettes produced. The quality of cylindrical briquettes produced in terms of bulk density, heating value (15.13 MJ/kg), moisture (6.2%), N and S closely met or has met the requirements of DIN 51731. Based on the operating expenses, the briquettes may be marked-up to Php0.25/pc (USD0.006) or Php15.00/kg (USD0.34) for profit generation. The potential daily earnings of Php130.00 (USD2.95) to Php288.56 (USD6.56) generated in producing briquettes are higher when compared to the majority of waste reclaimers’ daily income of Php124.00 (USD2.82). The high positive response (93%) on the usability of briquettes and the willingness of the respondents (81%) to buy them when sold in the market indicates its promising potential as fuel in the nearby communities. Results of briquette production citing the case of UCLA could be considered as potential source of income given the social, technical, economic and environmental feasibility of the experiment. This method of utilizing wastes in an urban setting of a developing country with similar socio-economic and physical set-ups may also be recommended for testing or replication.
Phase Field Modeling for Fracture with Applications to Homogeneous and Heterogeneous Materials
(2017)
The thesis presents an implementation including different applications of a variational-based approach for gradient type standard dissipative solids. Phase field model for brittle fracture is an application of the variational-based framework for gradient type solids. This model allows the prediction of different crack topologies and states. Of significant concern is the application of theoretical and numerical formulation of the phase field modeling into the commercial finite element software Abaqus in 2D and 3D. The fully coupled incremental variational formulation of phase field method is implemented by using the UEL and UMAT subroutines of Abaqus. The phase field method
considerably reduces the implementation complexity of fracture problems as it removes the need for numerical tracking of discontinuities in the displacement field that are characteristic of discrete crack methods. This is accomplished by replacing the sharp discontinuities with a scalar damage phase field representing the diffuse crack topology wherein the amount of diffusion is controlled by a regularization parameter. The nonlinear coupled system consisting of the linear momentum equation and a diffusion type equation governing the phase field evolution is solved simultaneously via a Newton-
Raphson approach. Post-processing of simulation results to be used as visualization
module is performed via an additional UMAT subroutine implemented in the standard Abaqus viewer.
In the same context, we propose a simple yet effective algorithm to initiate and propagate cracks in 2D geometries which is independent of both particular constitutive laws and specific element technology and dimension. It consists of a localization limiter in the form of the screened Poisson equation with, optionally, local mesh refinement. A staggered scheme for standard equilibrium and screened Cauchy equations is used. The remeshing part of the algorithm consists of a sequence of mesh subdivision and element erosion steps. Element subdivision is based on edge split operations using a
given constitutive quantity (either damage or void fraction). Mesh smoothing makes use of edge contraction as function of a given constitutive quantity such as the principal stress or void fraction. To assess the robustness and accuracy of this algorithm, we use both quasi-brittle benchmarks and ductile tests.
Furthermore, we introduce a computational approach regarding mechanical loading in microscale on an inelastically deforming composite material. The nanocomposites material of fully exfoliated clay/epoxy is shaped to predict macroscopic elastic and fracture related material parameters based on their fine–scale features. Two different configurations of polymer nanocomposites material (PNCs) have been studied. These configurations are fully bonded PNCs and PNCs with an interphase zone formation between the matrix and the clay reinforcement. The representative volume element of PNCs specimens with different clay weight contents, different aspect ratios, and different
interphase zone thicknesses are generated by adopting Python scripting. Different constitutive models are employed for the matrix, the clay platelets, and the interphase zones. The brittle fracture behavior of the epoxy matrix and the interphase zones material are modeled using the phase field approach, whereas the stiff silicate clay platelets of the composite are designated as a linear elastic material. The comprehensive study investigates the elastic and fracture behavior of PNCs composites, in addition to predict Young’s modulus, tensile strength, fracture toughness, surface energy dissipation, and cracks surface area in the composite for different material parameters, geometry, and interphase zones properties and thicknesses.
Die wachsende Notwendigkeit zur Energieeinsparung hat in verschiedenen Ländern zur Entwicklung von Prognosemodellen zur Bestimmung des Energiebedarfs im Wohnungssektor geführt. Obwohl Prognosemodelle prinzipiell eine Lösung zur Bestimmung des Energiebedarfs und zur Beurteilung der Auswirkungen von zukünftigen Energieeinsparmaßnahmen darstellen, sind die bestehenden Modelle jedoch mit Unwägbarkeiten in der Modellierung und Mängeln bezüglich der verwendeten Daten und Methodik behaftet.
In dieser Arbeit werden die Übertragbarkeit, Genauigkeit und stochastische Unsicherheit von zwölf Prognosemodellen (MAED-2, FfE-Gebäudemodell, CDEM, REM, CREEM, ECCABS, REEPS, BREHOMES, LEAP, DECM, CHM, BSM) analysiert, wobei Deutschland als Fallbeispiel verwendet wird. Zur Verbesserung der Übertragbarkeit der bestehenden Modelle werden Anpassungen vorgeschlagen. Außerdem wird für jedes Modell eine Bestimmung der einflussreichsten Parameter auf den simulierten Endenergiebedarf mit Hilfe einer Sensitivitätsanalyse vorgenommen. Es konnte gezeigt werden, dass Modelle mit einem hohen Detaillierungsgrad nicht zwangsläufig genauere Ergebnisse für den Endenergiebedarf garantieren. Dennoch wurde festgestellt, dass Modelle mit einem niedrigen Detaillierungsgrad Ergebnisse mit größeren Unsicherheiten liefern als Modelle mit einem höheren Detaillierungsgrad. Es wurde weiterhin festgestellt, dass die einflussreichsten Parameter zur Bestimmung des Endenergiebedarfs im Wohnungssektor Innenraumtemperatur, Außentemperatur (Gradtagzahl), Bevölkerungsentwicklung und Anzahl der Gebäude/Wohnungen sind.
Auf der Grundlage der Erkenntnisse zur Bewertung bestehender Modelle und der Bestimmung der einflussreichsten Parameter wurde ein optimiertes Prognosemodell (Transferable Residential Energy Model, TREM) entwickelt. Mit dessen Hilfe wurde die Entwicklung des Endenergiebedarfs im deutschen Wohnungssektor sowie in anderen Ländern (Vereinigtes Königsreich und Chile) prognostiziert. Diese Ergebnisse wurden anschließend mit statistischen Daten verglichen. Das TREM-Modell bestimmt den Endenergiebedarf auf der Grundlage der wahrscheinlichsten Variationen der einflussreichsten Eingangsparameter mit Hilfe einer Monte-Carlo-Simulation. Im Gegensatz zu bestehenden Modellierungsansätzen liefert das Modell damit auch einen Bereich mit Wahrscheinlichkeitsbändern für den zukünftigen Endenergiebedarf. Die Ergebnisse des TREM-Modells zeigen, dass das Modell genauere Ergebnisse liefern kann als derzeitige Modelle mit einem Mittelwert der prozentualen Differenz niedriger als 5% und einem Korrelationskoeffizienten r höher als 0,35 und darüber hinaus dazu geeignet ist, ohne Anpassungen eine Prognose der Entwicklung des zukünftigen Endenergiebedarfs im Wohnungssektor für unterschiedliche Länder zu erstellen.
The world society faces a huge challenge to implement the human right of “access to sanitation”. More and more it is accepted that the conventional approach towards providing sanitation services is not suitable to solve this problem. This dissertation examines the possibility to enhance “access to sanitation” for people who are living in areas with underdeveloped water and wastewater infrastructure systems. The idea hereby is to follow an integrated approach for sanitation, which allows for a mutual completion of existing infrastructure with resource-based sanitation systems.
The notion “integrated sanitation system (iSaS)” is defined in this work and guiding principles for iSaS are formulated. Further on the implementation of iSaS is assessed at the example of a case study in the city of Darkhan in Mongolia. More than half of Mongolia’s population live in settlements where yurts (tents of Nomadic people) are predominant. In these settlements (or “ger areas”) sanitation systems are not existent and the hygienic situation is precarious.
An iSaS has been developed for the ger areas in Darkhan and tested over more than two years. Further on a software-based model has been developed with the goal to describe and assess different variations of the iSaS. The results of the assessment of material-flows, monetary-flows and communication-flows within the iSaS are presented in this dissertation. The iSaS model is adaptable and transferable to the socio-economic conditions in other regions and climate zones.
Das Waldhufendorf Nakléřov (Nollendorf) gehört, wie eine Vielzahl weiterer Orte im bis 1945 hauptsächlich von deutschsprachiger Bevölkerung besiedelten tschechischen »Grenzgebiet«, zu jenen Orten, die heute aus der Perspektive verschiedener Akteure als verschwunden oder untergegangen beschrieben werden. Auf Grund ihres allgegenwärtigen fragmentarischen Erhaltungszustands und der oft fehlenden Bausubstanz scheinen sie bei einer oberflächlichen Schau nicht als Interessensgebiete der Denkmalpflege in Frage zu kommen. Untersucht man sie mit den wertneutralen Analyse- und Inventarisierungsverfahren der Angewandten Historischen Geografie, so kommt man zu einem differenzierteren Ergebnis, das zum einen die Darstellung als verschwundene Orte fragwürdig erscheinen lässt und zum anderen zu einer Neufokussierung des Aspekts der Abwesenheit aus denkmalpflegerischer Sicht führt. Im Verlauf der Bestandsaufnahme der gegenwärtigen materiellen Verfasstheit des paradigmatisch untersuchten Ortes, der Gesamtschau des Noch-Vorhandenen als komplexem Netz unterschiedlichster Indizien, die sowohl auf historische Tiefenschichtungen als auch auf Abwesenheiten verweisen, hat sich gezeigt, dass der Ort Nakléřov über vielfältige Relikte und Spuren verfügt, die auf seine Entstehung sowie unterschiedliche historische Epochen und Zäsuren verweisen. Basierend auf dem Palimpsest als Vorstellungsgerüst und der Spurensuche als Leitmotiv einer verräumlichten Geschichtsschreibung führte der am Ort erprobte mikrohistorische Blick zu einer geschärften Perspektive auf verborgene und verschwundene Schichten und Objekte, auf sich räumlich ausdrückende Machtverhältnisse und politische Zäsuren.
Zur Veranschaulichung wurden verschiedene Möglichkeiten einer GIS-basierten kartografischen Erfassung aufgezeigt, die der Besonderheit einer Landschaft der Leerstellen des 20. Jahrhunderts mit der Wüstung eines Ortes vor dem Hintergrund der Zwangsmigration der deutschen Bevölkerung und des politischen Regimewechsels nach 1945 gerecht werden sollte. In Fortführung der Denkanstöße von Norbert HUSE, den denkmalpflegerischen Leistungsbegriff in Frage zu stellen und auch Orte der Abwesenheit hinsichtlich ihrer potentiellen Denkmalwertigkeit zu hinterfragen, sowie in Anknüpfung an das Konzept der European Landscape Convention (2004), auch Landschaftsschäden und die Vergegenwärtigung nicht mehr vorhandener Landschaftscharakteristika in die Inventarisierung einzubeziehen, wurde im Untersuchungsgebiet der Kartierung stark geschädigter und verschwundener Bereiche und Objekte besondere Aufmerksamkeit gewidmet. Den Ausgangspunkt bildete die Bestandsaufnahme der Kulturlandschaftselemente mit historischem Zeugniswert, die unabhängig von Kriterien wie Schönheit oder kunsthistorischer Wert erfasst wurden. Auf der Chronotop-Karte hingegen wurde die Genese des Ortes zurückverfolgt. Das gleichzeitige Nebeneinander ungleichzeitiger Elemente wurde in verschiedenen räumlichen Ausschnitten hinsichtlich seiner Entwicklungsgeschichte analysiert, historisch kontextualisiert und auf Kontinuitäten und Zäsuren hin überprüft. Dabei stand nicht die Eruierung eines kulturlandschaftlichen »Urtextes« im Fokus, sondern das Herausarbeiten von Zeitschichten. Eine Gründung als Waldhufendorf von deutschen Siedlern um 1100, wie in den Dorfchroniken kolportiert, war nicht nachweisbar. Zu belegen ist, dass sich das im Kern mittelalterliche Dorf mit einer spätestens in der ersten Hälfte des 17. Jh. planmäßig angelegten Waldhufenstruktur bis zur Zäsur von 1945 über ca. 350 Jahre in dieser Form auch weiterentwickelt hat.
Mit der Zwangsmigration der deutschsprachigen Bevölkerung verschwand das »Pflegepersonal« der Kulturlandschaft. Auch durch die nachfolgende genossenschaftliche und militärische Nutzung veränderte sich der Ort flächendeckend. Die kleinteilige und durch pflanzliche Diversität gekennzeichnete Bewirtschaftung wich unter den neuen sozio-ökonomischen Bedingungen einer monokulturellen Flächenbewirtschaftung. Während die Teile des Flurbildes, die in funktionalem Zusammenhang mit der dörflichen Siedlung standen, größtenteils verloren gegangen sind, wurde der Charakter des Verkehrskorridors hingegen noch verstärkt. Der 1938 geplante Autobahnabschnitt auf der Trasse des prähistorischen Nollendorfer Passes wurde zu Beginn des 21. Jh. als Teil der A17 realisiert. Die zentrale Lage in einer Transitlandschaft erwies als entscheidend für die Entwicklung des Dorfes. Neben der Bedeutung als Handels- und Poststraße war die durch den Ort führende Querung des Osterzgebirges militärstrategisch wichtig und wurde im Verlauf verschiedener Kriege spätestens ab dem 11. Jh. bis 1945 rege genutzt. Mehrfach wurden Teile des Dorfes zerstört, doch im Gegensatz zur Zäsur nach 1945 erfolgte stets ein Wiederaufbau. Ernsthafte Bemühungen einer Neubesiedlung im Zuge der Wiederbesiedlungspolitik im Grenzgebiet sind nicht zu verzeichnen. Vielmehr wurden fast 90% des Gebäudebestands zwischen 1949–1964 als Abbruchhäuser verkauft oder dem Verfall überlassen.
Heute existieren in Nakléřov bauliche Zeugnisse in unterschiedlichen Erhaltungsgraden, die im Zusammenhang mit verschiedenen Phasen der Expansion, Stagnation und Regression in der Siedlungsentwicklung zu sehen sind. Die historische Bedeutung des Ortes ist nicht allein aus seiner fragmentarisch erhaltenen Gebäudesubstanz abzuleiten, sondern liegt in der Kontinuität der Gebäudestandorte und der Verbindung von Flur und Bauparzelle. In einem Waldhufendorf stellen die Lesesteinwälle das materialisierte Ordnungsgefüge dar. An ihnen wird der Dorfgrundriss mit seiner Parzellenstruktur erkennbar, der zur ältesten materiellen geschichtlichen Überlieferung auf dem Lande gehört. Die bauliche Substanz tritt in ihrer Bedeutung in den Hintergrund, wird zum Inventar, das auf Grund besonderer Rahmenbedingungen ausgetauscht wird. Vielmehr ist es in Nakléřov das durch die Lesesteinrücken markierte Nichtmehrvorhandensein vieler baulicher Strukturen, das als Bestandteil des historischen Zeugniswertes des Ortes zu bewerten ist. Die Lesesteinrücken sind nicht nur Spuren im Sinne von siedlungsgeschichtlich relevanten Überresten, sondern zugleich auch Spuren im Sinne von materiellen Anhaltspunkten, die Abwesenheit bezeugen und über das impulsgebende Potential verfügen, diese Abwesenheit zu hinterfragen und dem spurenbildenden Geschehen nachzuspüren. Das für Nakléřov prägnante ubiquitäre Zusammenspiel von an- und abwesenden Objekten wurde auf einer eigens entwickelten, auch auf andere Orte (im Grenzgebiet) übertragbaren Kartierung (KE) festgehalten, in der die Materialströme 1945–2012 dokumentiert wurden. Aktuell durch materielle Konstellationen markierte Orte der Leere wurden dechiffriert, indem Relikte nach Zeitschichten gestaffelt mit Visualisierungen verschwundener Objekte hinterlegt wurden.
Die über materielle Überreste transportierte Erfahrung von Abwesenheit wird auch an scheinbar kontext- und funktionslosen Elementen deutlich. Dazu gehört in Nakléřov z.B. ein Parkplatz, dessen Verwendungszweck zwar eindeutig ist, wohingegen sich seine Funktion an diesem Ort nicht ohne Hinzuziehung von Quellen erschließt. Ihn als Erwartungen störendes Element, dem eine »verdächtige Abwesenheit« inhärent ist, aufzufassen und als unabsichtliche Hinterlassenschaft zu hinterfragen, hat den Anstoß zur erinnerungskulturellen Dechiffrierung der banal anmutenden Fläche gegeben. Das Weiterverfolgen seiner Spur hat verschiedene Strategien der Verdrängung von erinnerungsstützenden und wahrnehmungslenkenden Artefakten und Zeichensetzungen sowie das dynamische und teils antagonistische Beziehungsgeflecht der sich in diesem räumlichen Ausschnitt befindlichen Objekte offengelegt. Neben Beschriftungen an einem Aussichtsturm und einem Schlachtendenkmal, deren Wechsel sich verändernde gesellschaftspolitische Bedingungen des 20. Jh. reflektieren, ist es ein »dichter Ort«, dessen geografische Lage zum Versuch einer gedächtnispolitischen Umcodierung und räumlichen Verankerung eines neuen Geschichtsnarrativs geführt hat. Der heute durch ein Holzkreuz markierte Ort war 300 Jahre lang Standort einer sakralen Landschaftsdominante, die 1975 in Vorbereitung der Installation eines Sowjetdenkmals gesprengt wurde. Die Planungsunterlagen belegen, dass ein Zulassen räumlich sichtbarer Erinnerungskonkurrenzen auszuschließen war und eine politisch motivierte Neubesetzung des Ortes unter besonderer Berücksichtigung seiner in die Landschaft ausgreifenden Raumwirkung angestrebt war. Einer der wenigen materiellen Überreste, die auf die Geschichte zur Errichtung des größten Sowjetdenkmals in Nordböhmen verweisen, ist der Parkplatz. Vor allem an diesem Beispiel hat sich auch gezeigt, dass der sich aus einem feinen Gespinst unterschiedlichster materieller Konstellationen zusammensetzende Ort als Geschichtsquelle nur bedingt anschaulich und »lesbar« ist. Neben die Bestimmung des historischen Zeugniswertes des Untersuchungsgebietes durch kartierte und »erzählte Geschichte« trat so zwangsläufig auch der Subtext einer Beschreibung des Prozesses der Spureninterpretation.
Dieser »dichte Ort« ist heute ein Ort aktiver objektgebundener Gedenkpraktiken, der durch eine Koexistenz von Erinnerungssträngen gekennzeichnet ist und von unterschiedlichen Akteuren genutzt wird. Die zweisprachige Tafel am Schlachtendenkmal, Pläne zur Wiedererrichtung des Aussichtsturms und zu Baumaßnahmen unter Berücksichtigung der historischen Siedlungsstruktur deuten auf eine wachsende Akzeptanz des kulturhistorischen Erbes der deutschsprachigen Bevölkerung hin. Auch verschiedene tschechische Projekte zur Dokumentation des Grenzgebiets, einschließlich der Erfassung dessen, was zerstört oder nur noch in Überresten vorhanden ist, belegen die Bereitschaft, sich mit der Geschichte der Landschaft auseinanderzusetzen. Orte, an denen die Erfahrung von Abwesenheit und Leere auf den flächendeckend offensichtlichen Bruch im Grenzland verweist, beinhalten das Potential als »storyscape« zu fungieren und ein an den Raum rückgebundenes Erzählen von erinnerungskulturell und sozial bedeutsamen »Geschichten« zu initiieren. Der mögliche Denkmalwert eines Ortes wie Nakléřov als repräsentativer und zugleich singulärer Bestandteil einer historischen Kulturlandschaft besteht in seinem Vermögen, Fragen aufzuwerfen und eine Beschäftigung mit der Geschichte des Ortes im lokalen, regionalen und europäischen Kontext einzuleiten. Das denkmalpflegerische Kriterium der Leistung manifestiert sich nicht im Objekt, sondern im Potential eines bestimmten räumlichen Ausschnitts, erinnerungskulturelle Prozesse und angesichts »umstrittener« oder »geteilter« Objekte und Orte Dialoge in Gang zu setzen.
Ein Ort, dessen historischer und erinnerungskultureller Wert aus dem Spannungsfeld zwischen an- und abwesenden Elementen, zwischen Leerstellen und Relikten resultiert, führt an die Grenzen traditioneller Denkmalbegrifflichkeiten, ist aber auf der Basis der Zusammenschau verschiedener theoretischer und praktischer Ansätze der Denkmalpflege, die unter dem Begriff »unbequeme Kulturlandschaft« zu subsumieren sind, in seiner potentiellen Denkmalwürdigkeit zu diskutieren. Die Grenzen dessen, was Denkmal sein kann, sind zwar seit den 1970er Jahren räumlich, substanziell und ideell durchlässiger geworden, werden aber immer noch von Ansprüchen an die materielle Substanz des Denkmals und an das Denkmal als Zeugnis von Leistung markiert. Auch HUSE sieht in der Bindung der Denkmalpflege »an die materielle Spur« sowohl eine Stärke als auch eine Schwäche: »Wo es diese nicht mehr gibt, kann es auch keine Denkmalpflege mehr geben.« Aber Denkmalpflege kann es auch dort geben, wo die Spur in existentieller Abhängigkeit vom Vorhandensein der sie umgebenden Substanz als interpretationsoffenes Zeitfenster im Raum verstanden wird. Die Spur ist an das Vorhandensein von materieller Substanz gebunden, denn ohne diese wäre die Spur weder präsent noch wahrnehmbar. Spuren sind dergestalt als Ensembles zu begreifen, die aus einer Leerstelle sowie der sie umgebenden, sie hervorbringenden und auf sie verweisenden materiellen Umgebung bestehen.
Für den Denkmalpfleger als Spurenleser stünde somit das sich über das Materielle ausdrückende Spannungsfeld zwischen Absenz und Präsenz im Fokus, das unter den Vorzeichen des Erinnerns und Vergessens für den kulturwissenschaftlichen Erinnerungs- und Gedächtnisdiskurs von Bedeutung ist. Ein umfassender Spurenbegriff wäre dem Substanzbegriff als Korrektiv zur Seite zu stellen, mit dem Potential, auf Abwesenheit als Resultat von destruktiven Einwirkungen hinzuweisen, Fragen auch nach (un)freiwilligen Zeugnissen, Kontexten, Ursachen, Menschen und ihrem Handeln aufzuwerfen, und dabei dennoch den Konnex zum Materiellen halten zu können. Ein Spurenbegriff, der über das Oszillieren der Spur zwischen ästhetischem und historischem Wert hinausgeht, verweisend auf tiefgreifende Verluste und Zerstörungsprozesse, scheint dazu geeignet, die Funktion des Denkmals auch als »Erinnerung an Brüche, Unschönes und Schwieriges, an Niederlagen und Irrwege, aber auch an Alternativen« zu stärken, die denkmalpflegerische Kanonbildung sowie Kernbegriffe der Disziplin wie Substanz und Leistung hinsichtlich ihrer generellen Anwendbarkeit auf die bestehende und potentielle Denkmalwelt zu hinterfragen. Orte und Objekte abseits traditioneller Vorstellungen vom Denkmal erfordern eine Neufokussierung des Substanzbegriffs, um eine komplexere und vielschichtige, auch konfligierende Deutungen zulassende Kultur- und Geschichtsbetrachtung zu ermöglichen. Eine Denkmalpflege als wissenschaftlich verankerte Disziplin, die sich mit ihren vielfältigen materialbasierten und verorteten Medien der Erinnerung, stärker in den fächer- und längst auch grenzübergreifenden Erinnerungsdiskurs einbringen will, braucht zu Beginn des 21. Jh. nach den Verwerfungen des 20. Jh. noch andere Orientierungspunkte, um sich auch in disparaten, auch von Destruktion geprägten Kulturräumen bewegen zu können.
Settlement is human place to live and do various activities (Finch, 1980). Concept of settlement layout is closely associated with human and a set of thoughts and behaviors. In this case, idea of pattern of activities in a society that is core of a culture becomes main factor in process of formation of houses and environment in a settlement. Factors which affecting form (physical) of architecture in a settlement environment are socio-cultural, economic, and religious determinant factor that manifested architectural realization (Rapoport, 1969).
Yogyakarta as the continuation of kingdom city in the Java Island finally exists as an Islamic kingdom that still remain to survive up to now. Impacts of this issue is appearance of various Moslem settlements to support typical character of an Islamic Kingdom.
Mlangi is an area of oldest Moslem settlements in Yogyakarta has not been explored in details for progress especially in physical glasses recently. Everything basic group and individual who arrange houses and residences, starts from how it has spatial concept alone. Although concept is a very abstract thing to explain in details, but its existence can be detected by how they created their physical environment.
This research conducted by these research questions: (1) What are spatial concepts owned by people in Mlangi and (2) How do spatial concepts owned by the people affect the settlements pattern?
Process to search spatial concept owned by the people in Moslem residence, making Mlangi as study area, was approached by using phenomenological research method. The researcher have to self-involved directly in unstructured interviews, but remained in guideline framework of in interviews to make research process effective. Fistly, the researcher interviewed the key person, they are the head of Mlangi administration (pak Dukuh) in Mlangi and Sawahan. They were then give advices to who was capable person that could draw the spatial concept and had many story and knew the history of the settlements. Step by step of interview guided from one informant to next informant when the information had been told repeatedly. The next informant based on the last informant advice or who had close relationship with the last theme appeared. To complete the narration and draw the result of interview, researcher have to add additional information with photograph and descriptive picture that can be draw the settlement empirically.
In process, 17 information units which found in field were consistent with sequence of interview events and flowing of theme to theme associated with Moslem residence of residence. Finally the interviews succeeded in abstracting 16 themes that may be classified into historic, socio-cultural, and spatial-concept dimensions in Mlangi. Process of analysis to find spatial concept owned by the people in Moslem settlements was carried out by dialogue of themes to find available substantive relationship.
Four concepts successfully analyzed consist of concepts of personage, concept of religious implementation, concept of Jero-Jaba and concept of Interest. The four concepts are really associated with one and others in understanding how spatial concept owned by the people affects residence they occupy. Yet, concept of Jero-Jaba bases all concepts of people in Mlangi . This concept can be used to draw red yarn on how they utilize communal spaces in residence and layout rooms of their individual houses. This concept also eternalize residence patterns existing in Mlangi now where residence does not experience many changes from starting of this residence existence (from detection of generation currently still living), namely residence patterns concentrate on orientation to Masjid Pathok Negoro of Mlangi.
This research was opening the potential research area, at least for the sociology, anthropology and demography research interest. So many unique character in Mlangi if looked at from how they maintain their spatial concept and manifested in their daily activities. How the people will concern only for the religious activities and the economic concern only for survival aspect in live.
Keywords: spatial concept, moslem settlements, phenomenology method, Indonesia,
Die Arbeit beschäftigt sich mit den Auswirkungen des Baus von neuen Stadtautobahnen in Santiago de Chile. Ziel der Studie ist, die Veränderungen im Segregationsmuster der Hauptstadt Chiles, die durch den Bau dieser Autobahnen entstanden sind, zu beschreiben.
Die Arbeit betrachtet die Entstehung von Segregationsmustern als kulturell-historisches Phänomen urbaner Bedeutung, weswegen die Entwicklung der Stadt Santiago und deren Segregationsmuster nicht nur aus der Perspektive der Stadtsoziologie und der Stadtgeographie, sondern auch aus einer historischen Perspektive analysiert wird. Dabei liegt der Schwerpunkt der Arbeit auf der Wechselbeziehung zwischen Verkehrsinfrastruktur und sozial-räumlicher Verteilung der verschiedenen sozialen Gruppen.
Die Entstehung der neuen Stadtautobahnen in Santiago de Chile lässt sich nur durch eine mehrdimensionale Betrachtung erklären. Diese Bauten und die besondere Art in der sie gebaut und betrieben werden, konnten nur durch die Einführung von Konzessionsmechanismen innerhalb einer neoliberalen Markwirtschaft entstehen. In diesem sozial-ökonomischer Rahmen, bei dem die Bürger lediglich als potenzielle Kunden betrachtet werden, sind die Infrastrukturbauten – darunter auch die Stadtautobahnen – maßgeschneiderte Produkte für eine Minderheit. Dieses Konzept hat gravierende Folgen für das Sozialgefüge der Stadt Santiago.
Die Folgen der Einführung der Stadtautobahnen auf das Segregationsmuster und das Sozialgefüge der Hauptstadt Chiles werden anhand zweier Fallstudien veranschaulicht. Mittels einer mehrschichtigen qualitativen Methodik werden die Auswirkungen des Baus von Stadtautobahnen im Armenviertel »Santo Tomás« des südlichen Stadtbezirk »La Pintana« und im elitären »Condominio La Reserva« im nördlichen Ausdehnungsgebiet »Chacabuco« analysiert.
Anschließend wird ein neues Beschreibungsmodell für die lateinamerikanische Stadt vorgeschlagen; das »symbiotische Stadtmodell« stützt sich zum größten Teil auf den Ausbau des Autobahnnetzes.
Organisation im soziotechnischen Gemenge - Mediale Umschichtungen durch die Einführung von SAP
(2017)
Der Alltag in Organisationen besteht vor allem aus den Medien und Technologien, mit denen die Koordination zwischen einzelnen Arbeitsabläufen hergestellt wird.
Diese ethnografische Studie begleitet den Prozess der Einführung eines SAP-Systems in einem mittelständischen Unternehmen und zeigt, wie das bestehende Geflecht aus Praktiken und Technologien eine Neuanordnung erfährt. Dabei tritt das komplexe soziotechnische Gemenge zutage, auf dem Koordination und Organisation beruhen. Es geht um Hardware, ebenso wie Software, um mechanische und elektronische Medien, um Papiere, Drucker, Akten, Interfaces und Tastaturen, aber auch um die jahrzehntelang eingespielten Routinen und das Erfahrungswissen der Angestellten.
In contemporary society, data representation is an important and essential part of many aspects of our daily lives. This thesis aims to contribute to our understanding on how people experience data and what role representational modality plays in the process of perception and interpretation. This research is grounded in phenomenology - I align my theoretical exploration to ideas and concepts from philosophical phenomenology, while also respecting the essence of a phenomenological approach in the choice and application of methods. Alongside offering a rich description of people’s experience of data representation, the key contributions I claim transcend four areas: theory, methods, design, and empirical findings. From a theoretical perspective, besides describing a phenomenology of human-data relations, I define, for the first time, multisensory data representation and establish a design space for the study of this class of representation. In relation to methodologies, I describe and deploy two methods to investigate different aspects of data experience. I blend the Repertory Grid technique with a focus group session and show how this adaption can be used to elicit rich design relevant insight. I also introduce the Elicitation Interview technique as a method for gathering detailed and precise accounts of human experience. Furthermore, I describe for the first time, how this technique can be used to elicit accounts of experience with data. My contribution to design relates to the creation of a series of bespoke data-driven artefacts, as well as describing an approach to design that I call Design Probes, which allows researchers to focus their enquiry on specific design features. To answer the research questions I set out in this thesis, I report on a series of empirical studies that used the aforementioned methods. The findings of these studies show, for instance, how certain representational modalities cause us to have heightened awareness of our body, some are more difficult to interpret than others, some rely heavily on instinct and each of them solicit us to reference external events during the process of interpretation. I conclude that a phenomenology of human-data relations show how representational modality affects the way we experience data, it also shows how this experience unfolds and it offers insight into particular moments such as the formation of meaning.
The thesis investigates at the computer aided simulation process for operational vibration analysis of complex coupled systems. As part of the internal methods project “Absolute Values” of the BMW Group, the thesis deals with the analysis of the structural dynamic interactions and excitation interactions. The overarching aim of the methods project is to predict the operational vibrations of engines.
Simulations are usually used to analyze technical aspects (e. g. operational vibrations, strength, ...) of single components in the industrial development. The boundary conditions of submodels are mostly based on experiences. So the interactions with neighboring components and systems are neglected. To get physically more realistic results but still efficient simulations, this work wants to support the engineer during the preprocessing phase by useful criteria.
At first suitable abstraction levels based on the existing literature are defined to identify structural dynamic interactions and excitation interactions of coupled systems. So it is possible to separate different effects of the coupled subsystems. On this basis, criteria are derived to assess the influence of interactions between the considered systems. These criteria can be used during the preprocessing phase and help the engineer to build up efficient models with respect to the interactions with neighboring systems. The method was developed by using several models with different complexity levels. Furthermore, the method is proved for the application in the industrial environment by using the example of a current combustion engine.
Ein aktuelles Thema in der Forschung der Betonindustrie ist die gezielte Steuerung des Erstarrens und der Entwicklung der (Früh)Festigkeit von Betonen und Mörteln. Aus ökonomischer Sicht sind außerdem die Reduktion der CO2-Emission und die Schonung von Ressourcen und Energie wichtige Forschungsschwerpunkte. Eine Möglichkeit zum Erreichen dieser Ziele ist es, die Reaktivität/Hydratation der silikatischen Klinkerphasen gezielt anzuregen. Neben den bereits bekannten Möglichkeiten der Hydratationsbeschleunigung (u.a. Wärmebehandlung, Zugabe von Salzen) bietet die Anwendung von Power-Ultraschall (PUS) eine weitere Alternative zur Beschleunigung der Zementhydratation. Da bis zum jetzigen Zeitpunkt noch keine Erfahrungen zum Einsatz von PUS in der Zementchemie vorliegen, sollen mit der vorliegenden Arbeit grundlegende Kenntnisse zum Einfluss von PUS auf das Fließ- und Erstarrungsverhalten von Zementsuspensionen erarbeitet werden.
Dazu wurde die Arbeit in fünf Hauptuntersuchungsabschnitte aufgeteilt.
Im ersten Teil wurden optimale PUS-Parameter wie Amplitude und Energieeintrag ermittelt, die eine effiziente Beschleunigung der Portlandzement(CEM I)hydratation bei kurzen Beschallzeiten und begrenzter Zementleimtemperaturerhöhung erlauben. Mit Hilfe unabhängiger Untersuchungsmethoden (Bestimmung des Erstarrungsbeginns, der Festigkeitsentwicklung, zerstörungsfreier Ultraschallprüfung, isothermer Wärmeflusskalorimetrie, hochauflösender Rasterelektronmikroskopie (REM) wurde die Wirkung von PUS auf den Hydratationsverlauf von CEM I-Suspensionen charakterisiert. Die Ergebnisse zeigen, dass die Behandlung von CEM I-Suspensionen mit PUS grundsätzlich ein beschleunigtes Erstarren und eine beschleunigte (Früh)Festigkeitsentwicklung hervorruft.
Anhand von REM-Untersuchungen konnte eindeutig nachgewiesen werden, dass die Beschleunigung der CEM I-Hydratation mit einer beschleunigten Hydratation der Hauptklinkerphase Alit korreliert. Auf Grundlage dieser Erkenntnisse wurden die Ursachen der Aktivierung der Alithydratation untersucht. Dazu wurden Untersuchungen an Einzelsystemen des CEM I (silikatische Klinkerphase) durchgeführt.
Es ist bekannt, das die Hydratation der Hauptklinkerphase Alit (in der reinen Form Tricalciumsilikat 3CaO*SiO2; C3S) durch Lösungs-/Fällungsreaktionen (Bildung von Calcium-Silikat-Hydrat Phasen, C-S-H Phasen) bestimmt wird. Mit Hilfe von Untersuchungen zur Auflösung (C3S) und Kristallbildung (C-S-H Phasen) in Lösungen und Suspensionen (Aufzeichnung der elektrischen Leitfähigkeit sowie Bestimmung der Ionenkonzentrationen der wässrigen Phase, REM-Charakterisierung der Präzipitate) wurde die Beeinflussung dieser durch eine PUS-Behandlung charakterisiert. Die Ergebnisse zeigen, dass in partikelfreien Lösungen (primäre Keimbildung) eine PUS-Behandlung keinen Einfluss auf die Kinetik der Kristallisation von C-S-H Phasen hervorruft. Das heißt, auch die durch PUS eingetragene Energie reicht offensichtlich nicht aus, um in Abwesenheit von Oberflächen die C-S-H Phasen Bildung zu beschleunigen. Das weist darauf hin, dass die Bildung von C-S-H Phasen nicht durch eine Beschleunigung von Ionen in der Lösung (erhöhte Diffusion durch Anwendung von PUS) hervorgerufen wird. Eine Beschleunigung des Kristallisationsprozesses (Keimbildung und Wachstum von C-S-H Phasen) durch PUS wird nur in Anwesenheit von Partikeln in der Lösung (Suspension) erzielt. Das belegen Ergebnisse, bei denen die Bildung erster C-S-H Phasen bei geringer Übersättigung (heterogene Keimbildung, in Anwesenheit von Oberflächen) erfolgt. Unter diesen Bedingungen konnte gezeigt werden, dass PUS innerhalb der ersten 30 Minuten der Hydratation eine erhöhte Fällung von ersten C-S-H Phasen bewirkt. Diese fungieren dann vermutlich während der Haupthydratation als Keim bzw. geeignete Oberfläche zum beschleunigten Aufwachsen von weiteren C-S-H Phasen. Weiterhin ist vorstellbar, dass (in Analogie zu anderen Bereichen der Sonochemie) PUS durch Kavitation Schockwellen hervorruft, welche Partikel und wässriges Medium beschleunigen und damit erhöhte Partikelbewegungen und -kollisionen induziert. Dies wiederum bewirkt, dass die anfänglich auf der C3S-Oberfläche gebildeten C-S-H Phasen teilweise wieder entfernt werden. Damit ist das Inlösunggehen von Ca- und Si-Ionen aus dem C3S weiterhin möglich. Um den genauen Mechanismus weiter zu charakterisieren sollten mit geeigneten Methoden weitere Untersuchungen durchgeführt werden.
Im zweiten Teil der Arbeit wurde der Einfluss von PUS auf das Fließverhalten von CEM I-Suspensionen untersucht. Aus der Anwendung von PUS in anderen technischen Bereichen sind unter anderem Effekte wie das Entlüften, das Homogenisieren und das Dispergieren von Suspensionen und Emulsionen mittels PUS bekannt. Mit Hilfe der Bestimmung des Luftporengehaltes, Sedimentationsversuchen und cryo-SEM Untersuchungen wurde der Einfluss von PUS auf CEM I-Suspensionen charakterisiert. Die Ergebnisse belegen, dass durch PUS eine verbesserte Homogenität und Dispergierung der CEM I-Suspension erzielt wird. Damit wird für CEM I-Suspensionen unterschiedlichster w/z-Werte eine verbesserte Fließfähigkeit festgestellt. Ergebnisse der Bestimmung von Ausbreitmaßen und Trichterauslaufzeiten zeigen, dass PUS einen direkten Einfluss vor allem auf die Viskosität der CEM I-Suspensionen besitzt. Werden Fließmitteln (FM) der CEM I-Suspension zugegeben, wird nicht in jedem Fall eine verbesserte Fließfähigkeit festgestellt. Hier scheint unter bestimmten Voraussetzungen (w/z-Wert, FM-Gehalt, PUS) die Reaktion zwischen Aluminat- und Sulfatphase des Klinkers gestört. Zur eindeutigen Klärung dieses Sachverhaltes bedarf es jedoch weiterer quantitativer Untersuchungen zum Reaktionsumsatz.
Im dritten Teil der Arbeit wurden die am CEM I gewonnenen Erkenntnisse zum Einfluss von PUS auf die Hydratation an Portland-Hüttensand(HÜS)-Zement-Systemen verifiziert. Dafür
wurden auch in diesem Teil der Arbeit zunächst die optimalen PUS-Parameter festgelegt und der Einfluss auf das Erstarrung- und Erhärtungsverhalten dokumentiert. Untersuchungsmethoden sind unter anderem die Bestimmung des Erstarrungsbeginns und der (Früh)Festigkeitsentwicklung, Temperaturaufzeichnungen und isothermale Wärmeflusskalorimetrie sowie REM. Die Ergebnisse zeigen, dass auch die Reaktion von HÜS-Zementen durch PUS beschleunigt wird. Weiterführende Untersuchungen belegen, dass die erzielte Beschleunigung vorwiegend auf der Beschleunigung der Alitkomponente des CEM I beruht.
Im Fokus der Teile vier und fünf dieser Arbeit stand die Anwendbarkeit der PUS-Technik unter praktischen Bedingungen. Zum einen wurde die Anwendbarkeit von PUS in fertig gemischten Mörteln beurteilt. Anhand des Vergleichs wichtiger Frisch- und Festmörteleigenschaften unterschiedlich hergestellter Mörtel (beschallt im Anschluss an konventionelle Mischtechnik, beschallt im Anschluss an Suspensionsmischtechnik mit anschließender Zumischung der Gesteinskörnung und nicht beschallt) wird gezeigt, dass im Fall von Mörteln mit hohem Leimanteil eine durch PUS induzierte beschleunigte Festigkeitsentwicklung auch mit herkömmlichen Mischabläufen (ohne aufwendige Umstellung des Mischprozesses) möglich ist.
Abschließend wird untersucht, ob der Herstellungsprozess von Wandbauteilen im Fertigteilwerk durch den Einsatz von PUS optimiert werden kann und ob eine Einbindung der PUS-Technik in den Fertigungsprozess ohne größeren Aufwand möglich ist. Dazu wurden in einem ersten Schritt die Frisch- und Festbetoneigenschaften eines aktuell angewendeten selbstverdichtenden Betons im Labormaßstab (Mörtel) in Abhängigkeit einer PUS-Behandlung dokumentiert und mit der seiner unbeschallten Referenz verglichen. Aufgrund der durch PUS verursachten verbesserten Fließ- und Festigkeitseigenschaften kann die beschallte Mörtelrezeptur hinsichtlich Fließmittelgehalt und Dauer der Wärmebehandlung optimiert werden. Somit werden ca. 30 % der Fließmittelzugabe und 40 % der Dauer der Wärmebehandlung eigespart. Eine Einbindung der PUS-Technik in das betrachtete Fertigteilwerk ist nach Überprüfung der konstruktiven Gegebenheiten der Fertigungsstrukturen ohne größeren Aufwand möglich.
The gradual digitization in the architecture, engineering, and construction industry over the past fifty years led to an extremely heterogeneous software environment, which today is embodied by the multitude of different digital tools and proprietary data formats used by the many specialists contributing to the design process in a construction project. Though these projects become increasingly complex, the demands on financial efficiency and the completion within a tight schedule grow at the same time. The digital collaboration of project partners has been identified as one key issue in successfully dealing with these challenges. Yet currently, the numerous software applications and their respective individual views on the design process severely impede that collaboration.
An approach to establish a unified basis for the digital collaboration, regardless of the existing software heterogeneity, is a comprehensive digital building model contributed to by all projects partners. This type of data management known as building information modeling (BIM) has many benefits, yet its adoption is associated with many difficulties and thus, proceeds only slowly. One aspect in the field of conflicting requirements on such a digital model is the cooperation of architects and structural engineers. Traditionally, these two disciplines use different abstractions of reality for their models that in consequence lead to incompatible digital representations thereof.
The onset of isogeometric analysis (IGA) promised to ease the discrepancy in design and analysis model representations. Yet, that initial focus quickly shifted towards using these methods as a more powerful basis for numerical simulations. Furthermore, the isogeometric representation alone is not capable of solving the model abstraction problem. It is thus the intention of this work to contribute to an improved digital collaboration of architects and engineers by exploring an integrated analysis approach on the basis of an unified digital model and solid geometry expressed by splines. In the course of this work, an analysis framework is developed that utilizes such models to automatically conduct numerical simulations commonly required in construction projects. In essence, this allows to retrieve structural analysis results from BIM models in a fast and simple manner, thereby facilitating rapid design iterations and profound design feedback.
The BIM implementation Industry Foundation Classes (IFC) is reviewed with regard to its capabilities of representing the unified model. The current IFC schema strongly supports the use of redundant model data, a major pitfall in digital collaboration. Additionally, it does not allow to describe the geometry by volumetric splines. As the pursued approach builds upon a unique model for both, architectural and structural design, and furthermore requires solid geometry, necessary schema modifications are suggested.
Structural entities are modeled by volumetric NURBS patches, each of which constitutes an individual subdomain that, with regard to the analysis, is incompatible with the remaining full model. The resulting consequences for numerical simulation are elaborated in this work. The individual subdomains have to be weakly coupled, for which the mortar method is used. Different approaches to discretize the interface traction fields are implemented and their respective impact on the analysis results is evaluated. All necessary coupling conditions are automatically derived from the related geometry model.
The weak coupling procedure leads to a linear system of equations in saddle point form, which, owed to the volumetric modeling, is large in size and, the associated coefficient matrix has, due to the use of higher degree basis functions, a high bandwidth. The peculiarities of the system require adapted solution methods that generally cause higher numerical costs than the standard procedures for symmetric, positive-definite systems do. Different methods to solve the specific system are investigated and an efficient parallel algorithm is finally proposed.
When the structural analysis model is derived from the unified model in the BIM data, it does in general initially not meet the requirements on the discretization that are necessary to obtain sufficiently accurate analysis results. The consequently necessary patch refinements must be controlled automatically to allowfor an entirely automatic analysis procedure. For that purpose, an empirical refinement scheme based on the geometrical and possibly mechanical properties of the specific entities is proposed. The level of refinement may be selectively manipulated by the structural engineer in charge. Furthermore, a Zienkiewicz-Zhu type error estimator is adapted for the use with isogeometric analysis results. It is shown that also this estimator can be used to steer an adaptive refinement procedure.
In der Arbeit wurde eine Methode für eine kulturübergreifende Vergleichsstudie zwischen China und dem Westen erarbeitet. Diese Methode ermöglicht Unternehmensentwicklung in China aus dem eignen historischen Zusammenhang zu verstehen, statt nur aus einem rein theoretischen Blickwinkel. Weil heutige wissenschaftliche Theorien meist aus der westlichen Kultur stammen und mit Wertvorstellungen sowie mit Begriffen aus dem westlichen Kulturkreis verbunden sind, müssen sie im historischen Kontext des westlichen Kulturkreises betrachtet werden.
Im ersten Teil der Arbeit wird der westliche moderne Staat als Untersuchungsbegriff herangezogen, seine Entstehungsbedingungen und seine Verwendungsart und -weise, besonders wie er die ökonomische Theorie und die Praxis im Westen beeinflusst, dabei spielt das moderne Staatsprinzip eine wichtige Rolle. Die Neue Institutionenökonomik dient als theoretischer Referenzrahmen für diese Arbeit. Mittels einer theoretischen Erweiterung mit dem westlichen modernen Staatsverständnis werden wichtige westliche konstitutionelle Institutionen analysiert, da sie die Handlungsrechte und -pflichten der Bürger sowie die Bildung der kapitalistischen Unternehmung beeinflussen.
Im zweiten Teil der Arbeit wird das chinesische Staatsverständnis analysiert – vom traditionellen „Tianxia“ zum „modernen“ Staat. Mithilfe abgeleiteter Kriterien wird die chinesische Unternehmensentwicklung in drei zeitlichen Querschnittsphasen betrachtet, wie sich chinesische Unternehmen vom traditionellen bis zum „modernen“ entwickelten. Als Fallbeispiel werden chinesische Buchdruckunternehmen herangezogen. Zuerst wird das Buchdrucksystem sowie seine Veränderungen in drei Zeitphase betrachtet. Dabei wird auf die Aspekte Buchdruckorganisation, staatliche Verwaltung, wie Zensur und Urheberrecht sowie Lehrmaterial fokussiert, die für die Buchdruckunternehmensentwicklung von Bedeutung sind und ein System darstellen. Aus Mikrosicht werden drei Buchdruckunternehmen in den Zeitphasen analysiert. Im Ergebnis der Arbeit werden Schlussfolgerungen abgeleitet, bspw. dass Modernisierung als Aktualisierung verstanden werden sollte, aber nicht als Zerstörung.
This thesis suggests cooperation as a design paradigm for human-computer interaction. The basic idea is that the synergistic co-operation of interfaces through concurrent user activities enables increased interaction fluency and expressiveness. This applies to bimanual interaction and multi-finger input, e.g., touch typing, as well as the collaboration of multiple users. Cooperative user interfaces offer more interaction
flexibility and expressivity for single and multiple users.
Part I of this thesis analyzes the state of the art in user interface design. It explores limitations of common approaches and reveals the crucial role of cooperative action in several established user interfaces and research prototypes. A review of related research in psychology and human-computer interaction offers insights to the cognitive, behavioral, and ergonomic foundations of cooperative user interfaces. Moreover, this thesis suggests a broad applicability of generic cooperation patterns and contributes three high-level design principles.
Part II presents three experiments towards cooperative user interfaces in detail. A study on desktop-based 3D input devices, explores fundamental benefits of cooperative bimanual input and the impact of interface design on bimanual cooperative behavior. A novel interaction technique for multitouch devices is presented that follows the paradigm of cooperative user interfaces and demonstrates advantages over the status quo. Finally, this thesis introduces a fundamentally new display technology that provides up to six users with their individual perspectives of a shared 3D environment. The system creates new possibilities for the cooperative interaction of
multiple users.
Part III of this thesis builds on the research results described in Part II, in particular, the multi-user 3D display system. A series of case studies in the field of collaborative virtual reality provides exemplary evidence for the relevance and applicability of the suggested design principles.
In meiner theoretisch_praktischen Arbeit befasse ich mich mit der verletzenden Kraft von Sprache jenseits direkter Adressierung.
Es wird der Frage nachgegangen, ob und wie auch da Verletzung durch Sprache stattfindet, wo keine offensichtliche Diskriminierung erfolgt, sondern subtilere Wirkmächte der Performativität am Werk sind. Sprachliche Benenn- und Beweisbarkeit verletzenden Sprechens werden dabei in Frage gestellt und einem Wahrnehmen und Begegnen Vorrang gegeben.
Sowohl im eher theoretischen Teil, dem „Fragment I: 943 Fragen zur sprachlichen Gewalt“, als auch im vorwiegend praktischen Teil, dem „Fragment II: Untersuchungen und Zwischennutzungen“, wird eine Perspektive auf kritische Handlungsfähigkeit in Bezug auf Sprache und Gewalt eröffnet. Es wird ein Verständnis von Verantwortung als ein Affekt und zugleich Ort der Kritik zur Diskussion gestellt und befragt. Dabei versuche ich, über die dichotome Verfestigung von „Wir und die Anderen“ hinauszugelangen und dabei ein WIR, das nicht vom IHR getrennt ist, als WIHR in den Blick zu nehmen. Dieses WIHR muss notwendigerweise offen und flexibel bleiben. Es soll eine Art Möglichkeitsraum schaffen, der nicht neu geordnet, sondern im beständigen Fragen einer abschließenden Antwort entzogen wird.
Eine Annäherung in vor allem zeichnerischen und auditiven Untersuchungen sowie 943 Fragen.
Piezoelectric materials are used in several applications as sensors and actuators where they experience high stress and electric field concentrations as a result of which they may fail due to fracture. Though there are many analytical and experimental works on piezoelectric fracture mechanics. There are very few studies about damage detection, which is an interesting way to prevent the failure of these ceramics.
An iterative method to treat the inverse problem of detecting cracks and voids in piezoelectric structures is proposed. Extended finite element method (XFEM) is employed for solving the inverse problem as it allows the use of a single regular mesh for large number of iterations with different flaw geometries.
Firstly, minimization of cost function is performed by Multilevel Coordinate Search (MCS) method. The XFEM-MCS methodology is applied to two dimensional electromechanical problems where flaws considered are straight cracks and elliptical voids. Then a numerical method based on combination of classical shape derivative and level set method for front propagation used in structural optimization is utilized to minimize the cost function. The results obtained show that the XFEM-level set methodology is effectively able to determine the number of voids in a piezoelectric structure and its corresponding locations.
The XFEM-level set methodology is improved to solve the inverse problem of detecting inclusion interfaces in a piezoelectric structure. The material interfaces are implicitly represented by level sets which are identified by applying regularisation using total variation penalty terms. The formulation is presented for three dimensional structures and inclusions made of different materials are detected by using multiple level sets. The results obtained prove that the iterative procedure proposed can determine the location and approximate shape of material subdomains in the presence of higher noise levels.
Piezoelectric nanostructures exhibit size dependent properties because of surface elasticity and surface piezoelectricity. Initially a study to understand the influence of surface elasticity on optimization of nano elastic beams is performed. The boundary of the nano structure is implicitly represented by a level set function, which is considered as the design variable in the optimization process. Two objective functions, minimizing the total potential energy of a nanostructure subjected to a material volume constraint and minimizing the least square error compared to a target
displacement, are chosen for the numerical examples. The numerical examples demonstrate the importance of size and aspect ratio in determining how surface effects impact the optimized topology of nanobeams.
Finally a conventional cantilever energy harvester with a piezoelectric nano layer is analysed. The presence of surface piezoelectricity in nano beams and nano plates leads to increase in electromechanical coupling coefficient. Topology optimization of these piezoelectric structures in an energy harvesting device to further increase energy conversion using appropriately modified XFEM-level set algorithm is performed .
Briefly, the two basic questions that this research is supposed to answer are:
1. Howmuch fiber is needed and how fibers should be distributed through a fiber reinforced composite (FRC) structure in order to obtain the optimal and reliable structural response?
2. How do uncertainties influence the optimization results and reliability of the structure?
Giving answer to the above questions a double stage sequential optimization algorithm for finding the optimal content of short fiber reinforcements and their distribution in the composite structure, considering uncertain design parameters, is presented. In the first stage, the optimal amount of short fibers in a FRC structure with uniformly distributed fibers is conducted in the framework of a Reliability Based Design Optimization (RBDO) problem. Presented model considers material, structural and modeling uncertainties. In the second stage, the fiber distribution optimization (with the aim to further increase in structural reliability) is performed by defining a fiber distribution function through a Non-Uniform Rational BSpline (NURBS) surface. The advantages of using the NURBS surface as a fiber distribution function include: using the same data set for the optimization and analysis; high convergence rate due to the smoothness of the NURBS; mesh independency of the optimal layout; no need for any post processing technique and its non-heuristic nature. The output of stage 1 (the optimal fiber content for homogeneously distributed fibers) is considered as the input of stage 2. The output of stage 2 is the Reliability Index (b ) of the structure with the optimal fiber content and distribution.
First order reliability method (in order to approximate the limit state function) as well as different material models including Rule of Mixtures, Mori-Tanaka, energy-based approach and stochastic multi-scales are implemented in different examples. The proposed combined model is able to capture the role of available uncertainties in FRC structures through a computationally efficient algorithm using all sequential, NURBS and sensitivity based techniques. The methodology is successfully implemented for interfacial shear stress optimization in sandwich beams and also for optimization of the internal cooling channels in a ceramic matrix composite.
Finally, after some changes and modifications by combining Isogeometric Analysis, level set and point wise density mapping techniques, the computational framework is extended for topology optimization of piezoelectric / flexoelectric materials.
Die vorliegende Arbeit untersucht das Potential von Webanwendungen in 3D zur Vermittlung von Informationen im Allgemeinen und zur Darstellung von städtebaulichen Zusammenhängen im Speziellen.
Als grundlegender Faktor der visuellen und funktionalen Qualität - welche die Wahrnehmung des Nutzers direkt beeinflusst -, erfolgt die Bewertung der Machbarkeit von 3D Webinhalten unter Anwendung einer explorativen, qualitativen Evaluierung von Webagenturen.
Darauf aufbauend wird das Potential von 3D Webanwendungen aus Nutzerperspektive untersucht, um Zusammenhänge herstellen zu können: einerseits zwischen der Machbarkeit bei der Entwicklung und anderseits die Akzeptanzkriterien beim Rezipienten betreffend.
Die empirische Studie, die mit dem Forschungspartner Bosch für diese Arbeit modelliert wurde, eruiert zum einen, inwiefern 3D im Vergleich zu 2D und 2,5D, und zum anderen WebGL im Vergleich zu bisherigen 3D Webtechnologien die visuelle Wahrnehmung und kognitive Leistungsfähigkeit des Nutzers beeinflusst.
Die Erkenntnisse der Untersuchung zeigen Parallelen zu bestehenden Studien aus web-fernen Bereichen.
Um die Bedeutung von 3D Webanwendungen zur Verbesserung von Entscheidungsprozessen in Stadtplanungsprojekten ableiten zu können, werden Aspekte zur Interaktion und visuellen Wahrnehmung in den speziellen Kontext von Stadtplanungswerkzeugen gebracht. Dabei wird überprüft, ob sich web-basierte 3D Visualisierungen sinnvoll zur Vermittlung städtebaulicher Zusammenhänge einbinden lassen und inwieweit bestehende Projekte, wie in dieser Arbeit beispielhaft das vom Fraunhofer IGD entwickelte Forschungsprojekt urbanAPI, die Technologie WebGL nutzen können.
Vor diesem Hintergrund soll die Arbeit Akzeptanzkriterien und Nutzungsbarrieren von 3D Webanwendungen auf Basis der Technologie WebGL identifizieren, um einen Beitrag zur Machbarkeit von Webanwendungen und zur Entwicklung entsprechender Stadtplanungswerkzeuge zu leisten.
A parametric method for building design optimization based on Life Cycle Assessment - Appendix
(2016)
The building sector is responsible for a large share of human environmental impacts, over which architects and planners have a major influence. The main objective of this thesis is to develop a method for environmental building design optimization based on Life Cycle Assessment (LCA) that is applicable as part of the design process. The research approach includes a thorough analysis of LCA for buildings in relation to the architectural design stages and the establishment of a requirement catalogue. The key concept of the novel method called Parametric Life Cycle Assessment(PLCA) is to combine LCA with parametric design. The application of this method to three examples shows that building designs can be optimized time-efficiently and holistically from the beginning of the most influential early design stages, an achievement which has not been possible until now.
In this study, the behavior of a widely graded soil prone to suffusion and necessity of homogeneity quantifi cation for such a soil in internal stability considerations are discussed. With the help of suffusion tests, the dependency of the particle washout to homogeneity of sample is shown. The validity of the great infl uence of homogeneity on suffusion processes by the presentation of arguments and evidences are established. It is emphasized that the internal stability of a widely graded soil cannot be directly correlated to the common geotechnical parameters such as dry density or permeability. The initiation and propagation of the suffusion processes are clearly a particle scale phenomenon, so the homogeneity of particle assemblies (micro-scale) has a decisive effect on particle rearrangement and washout processes. It is addressed that the guidelines for assessing internal stability lack a fundamental, scientifi c basis for quantifi cation of homogeneity. The observation of the segregation processes within the sample in an ascending layered order (for downwards fl ow) inspired the author to propose a new packing model for granular materials which are prone to internally instability.
It is shown that the particle arrangement, especially the arrangement of soil skeleton particles or the so-called primary fabric has the main role in suffusiv processes. Therefore, an experimental approach for identifi cation of the skeleton in the soil matrix is proposed. 3D models of Sequential Fill Tests using Discrete Element Method (DEM) and 3D models of granular packings for relative, stochastically and ideal homogeneous particle assemblies were generated, and simulations have been carried out.
Based on the numerical investigations and in dependency on the soil skeleton behavior, an approach for measurement of relevant scale, the so-called Representative Elementary Volume (REV) for homogeneity investigation is proposed. The development of a new testing method for quantifi cation of homogeneity is introduced (in-situ). An approach for quantifi cation of homogeneity in numerically or experimentally generated packings (samples) based on image processing method of MATLAB has been introduced. A generalized experimental method for assessment of internal stability for widely graded soils with dominant coarse matrix is developed, and a new suffusion criterion based on ideal homogeneous internally stable granular packing is designed.
My research emphasizes that in a widely graded soils with dominant coarse matrix, the soil fractions with diameters bigger than D60 build essentially the soil skeleton. The mass and spatial distribution of these fractions governs the internal stability, and the mass and distribution of the fi ll fractions are a secondary matter. For such a soil, the homogeneity of the skeleton must be cautiously measured and verified.
Die vorliegende Arbeit beschäftigt sich mit dem Thema Stadthotels in Deutschland zwischen Energieeffizienz und Wirtschaftlichkeit - Studie auf Grundlagen der EnEV-Anforderungen. Die Arbeit setzt sich mit einer qualitativen und quantitativen Analyse über die Energieeffizienz auf Grundlagen der EnEV-Anforderungen und deren Wirtschaftlichkeit bei Stadthotels in Deutschland auseinander. Die Analyse wurde anhand von verschiedenen Untersuchungen bei Hotels aufgebaut. Diese umfassen empirische, energetische und wirtschaftliche Untersuchungen. Die durchgeführten Untersuchungen kommen schließlich zu eindeutigen Ergebnissen auf verschiedenen Ebenen. Im Ergebnis wird deutlich, dass die Optimierung der Gebäudetechnik sowie auch die Verbesserung der energetischen Qualität der Gebäudehülle der Hotels bedeutende Einflussfaktoren zur Steigerung der Energieeffizienz darstellen. Dabei ist jedoch festzuhalten, dass sich die Optimierung der Gebäudetechnik der Hotels insbesondere im Bereich der Lüftungs- und Klimatechnik als besonders wirksam erwiesen hat. Die Effektivität dieser Maßnahmen konnte sowohl in Hinsicht auf die Steigerung der Energieeffizienz als auch in Bezug auf die Wirtschaftlichkeit bewiesen werden.
Die Dissertation über „Ambiguität im zeitgenössischen Film – Flugversuche“ folgt der Spur einer populären narrativen Tendenz im Kino – nämlich der Mehrdeutigkeit – und zeichnet ihr dramaturgisches Potential, wie ihre ethischen (bzw. mikropolitischen) Implikationen nach. Um typische Muster in der Wahrnehmung mehrdeutiger Filmerzählungen zu beschreiben, die bereits auf der vorbewussten Ebene der Affekte wirksam sind, greife ich auf Begriffe der Prozessphilosophie Alfred North Whitehead’s zurück und auf ihre neueren Reformulierungen bei Gilles Deleuze und Brian Massumi. Ausgehend von Alejandro González Iñárritu’s "Babel" (2006) begibt sich der Leser im ersten Teil auf einen virtuellen Rundflug durch ausgewählte Filmbeispiele mit einem kulturellen Ankerpunkt im heutigen Japan. Im zweiten Teil beschreibe und reflektiere ich mein methodisches Vorgehen in den ersten Phasen der Stoffentwicklung zu einem suggestiven Spielfilmprojekt, und kontextualisiere es mit Interviews zeitgenössischer Autorenfilmer, die ähnliche Erzählweisen entwickeln.
The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME)
shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes
near the crack such as blending or shifting.
As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation.
In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected
pipes.
Problem definition and research objectives
1. The production of Portland cement clinker causes approx. 5% to 8% of the annual man-made CO2 emissions. This is due to the usage of mainly fossil fuel (approx. 40 % of the total CO2) and because of the decarbonation of limestone as a main component of the raw meal (approx. 60 % of the total CO2).
2. Various strategies are applied in order to reduce the green-house gas-emissions, such as optimizing the process of clinker production, the use of alternative fuel and the partial substitution of the clinker in blended cement by so-called SCM (supplementary cementitious materials). Hereby blast-furnace slag, fly ash and limestone are the most used materials.
3. Quaternary systems containing three SCM simultaneously besides Portland cement contribute to the reduction of CO2 emissions due to the decrease of the clinker content. In addition, such systems allow to use blast-furnace slag and fly ash in the most economical way and provide the possibility to account for shortages of SCM on the market.
4. Blast-furnace slag and fly ash show similarities in their principal chemical compositions such that similar hydrates are formed during their reaction in presence of Portland cement. Compared to ternary systems based on blast-furnace slag or fly ash besides limestone, quaternary systems that contain both, blast-furnace slag and fly ash, simultaneously besides limestone, are expected to perform similar in terms of phase assemblage and strength development.
5. The use of SCM as cement replacing materials is limited due to their generally slower reaction compared to neat cement which also leads to lower strength development, especially in the early stage of the hydration up to 28 d. To account for this it is necessary to study the reactivity of SCM such as blast-furnace slag and fly ash in detail in order to develop strategies to enhance the reactivity and thereby the strength development of SCM-containing systems.
6. The early hydration of clinker phases is studied in detail, mainly in diluted systems. It is unclear if processes that were found to control the reaction of such model systems are also prevailing in concentrated cement pastes under realistic water-to-solid ratios. Deeper insight to this aspect is needed to better understand interactions of neat Portland cement and SCM in the first hours of hydration.
State-of-the-art
7. Increasing Ca-concentrations lead to decreasing dissolution rates of C3S and C2S in diluted systems.
8. The hydration kinetics of C3S is controlled by the interplay of undersaturation with respect to C3S and oversaturation with respect to C-S-H.
9. Increasing Al-concentrations lead to a retardation of the hydration of C3S. It is unclear if the uptake of aluminum in C-S-H to form C-(A)-S-H which has a significantly lower growth rate than pure C-S-H or a retarding effect of Al on the dissolution of C3S causes this phenomenon.
10. The surface of limestone provides excellent conditions for the nucleation and growth of C-S-H such that significantly more C-S-H nuclei are formed in presence of limestone compared to other SCM.
11. The reactivity of blast-furnace slag and fly ash depends on the particle size as well as on the intrinsic reactivity of especially the amorphous phases.
12. An increase in network modifying oxides (e.g. CaO) in the chemical composition of amorphous (calcium)aluminosilicates leads to an increasingly depolymerized network which in turn causes increasing reactivity. The role of amphoteric oxides (Al2O3, Fe2O3) that can be present as network modifying oxides as well as network forming oxides is not completely solved.
13. CO2-containing AFm-phases are thermodynamically more stable than monosulfoaluminate. This indirectly stabilizes the voluminous ettringite which causes a higher total volume of hydrates and lower porosity whereby higher compressive strength is reached.
14. Only a few percent of limestone in blended cement reacts chemically dependent on the Al2O3 available for reaction. Al2O3 that is provided by the reaction of Portland cement but also by the dissolution of SCM, especially by fly ash, reacts to form hemicarboaluminate which is transformed to monocarboaluminate as the hydration proceeds.
Methodology
15. The influence of SCM on the early hydration of Portland cement in binary (including blast-furnace slag or fly ash or limestone or quartz) and ternary (including fly ash and limestone) systems was investigated applying isothermal calorimetry and analysis of the pore solution chemistry. Calculated saturation indices and solubility products of relevant phases were correlated with heat development. Based on the gained data it was reviewed if mechanisms that control the hydration of pure phases in diluted systems are also prevailing in cement pastes under realistic conditions.
16. The influence of the chemical composition of synthetic glasses on their dissolution at high pH was investigated in highly diluted systems using ion chromatography. Pozzolanity tests were conducted on pastes using simplified model systems and glass-blended Portland cements. The process of the glass dissolution was investigated by isothermal calorimetry and by thermogravimetry. Correlation of experimentally determined total bound water with bound water determined by mass balance calculations as a function of amount of glass reacted allowed to estimate the degree of glass reaction in the pastes. Further on selective dissolution experiments were carried out to crosscheck the results of the bound water/mass balance approach.
17. The reaction kinetics of quaternary pastes containing blast-furnace slag and fly ash simultaneously in the presence of limestone were investigated up to 28 d using isothermal calorimetry and chemical shrinkage measurements. In addition strength tests on mortar bars were carried out.
18. Pastes of quaternary blends were also investigated in terms of hydrate assemblage at ages of up to 182 d. Thermodynamic calculations regarding total volume of hydrates as a function of limestone and fly ash/blast-furnace slag content were conducted. The calculations were supported by thermogravimetric determination of bound water and portlandite content as well as qualitative X-ray diffraction. The results were correlated with strength tests on mortar bars.
19. The pore solutions of hydrated quaternary blends were extracted and investigated by means of ion chromatography at ages of up to 728 d. Based on the ion concentrations in the solutions saturation indices were calculated for relevant phases. In order to gain better insight to the blast-furnace slag reaction sulphate speciation was carried out at two blast furnace slag levels (20 and 30 wt.%) for selected samples up to 91 d of hydration and at 91 d for the whole matrix under investigation.
Main results
20. Investigations on the early hydration kinetics of binary systems showed a higher heat flow in presence of SCM compared to neat Portland cement. This is caused by the higher surface area that is available for the nucleation of hydrates and by the lower (over)saturation with respect to C-S-H. An increase in the Ca-concentration in the pore solution did not cause lower dissolution rates of C3S as was reported for pure phases in diluted systems. The highest dissolution was observed in the presence of limestone, i.e. at the highest Ca-concentration. The general trend of the reaction rate is inversely related to the degree of undersaturation with respect to C3S. The more undersaturated the faster the observed reaction. The presence of increasing Al-concentrations caused a retardation of the reaction which is in line with investigations on pure phases in diluted systems. Higher sulphate concentrations could be detected for the fly ash containing blend which possibly hindered ettringite precipitation and results in higher Al-concentrations. Correspondingly the low sulphate concentrations lead to lower Al-concentrations in the presence of quartz, blast-furnace slag and limestone compared to fly ash.
21. The early hydration kinetics of quaternary systems is significantly accelerated in the presence of limestone while fly ash leads to retardation. Compared to reference systems containing inert quartz, investigations by means of isothermal calorimetry and chemical shrinkage revealed an acceleration caused by blast-furnace slag. Additions of fly ash, limestone or mixtures thereof introduced another acceleration but differences are too small to be significant and clear distinguishing between the various SCM is not possible.
22. Investigations on the reactivity of synthetic glasses showed that increasing amounts of network modifying oxides caused an increase in reactivity and dissolution rates. The results reveal that Al2O3 acts mainly as network modifying oxide in all investigated glasses. Experimentally determined bound water (thermogravimetric experiments) in model systems and blended cements can be compared with bound water determined by mass balance calculations carried out as a function of the amount of glass reacted. This enables to estimate the degree of glass reaction.
23. The actual content of blast-furnace slag, fly ash or limestone does not exert significant influence on the development of compressive strength up to 7 d. At later ages thermodynamic calculations predict a degree of CaCO3 reaction of 2 to 5 wt.%. This leads to the formation of hemicarbonate and monocarbonate whereby ettringite is indirectly stabilized. As a result the total amount of solids is increased and compressive strength shows a slight maximum. Hereby the degree of CaCO3 reaction depends on the Al2O3 available for reaction which is not only provided by the dissolution of Portland cement but especially by the dissolution of the fly ash.
24. In general the presence of blast-furnace slag and fly ash in the presence of limestone exerts little influence on the hydrate assemblage. The substitution of some of the blast-furnace slag by fly ash leads to a slight decrease of portlandite and C-S-H and gives rise to the formation of more monocarbonate and hemicarbonate. Portlandite is consumed in a pozzolanic reaction with the fly ash whereby C-S-H is formed. However, the low reactivity of the fly ash causes a decrease in the amount of C-S-H formed. Thereby a lower total volume of hydrates is generated which is in line with slightly lower compressive strength in case of increasing fly ash content. The overall influence is small and all systems investigated reach strength class 42.5 N according to EN 196-1.
25. Corresponding to the investigations of the hydrate assemblage the pore solution chemistry of quaternary systems showed only small variations. Depending on the fly ash content the highest variations are observed for aluminium, i.e. increasing fly ash content leads to higher Al-concentrations. Another effect of increasing fly ash contents is an increasing undersaturation with respect to portlandite and a decreasing undersaturation with respect to strätlingite indicating the dissolution of portlandite.
26. The total concentration of sulfur in the pore solution is controlled by sulphate (SO42–) while the concentrations of sulphite (SO32–) and thiosulphate (S2O32–) were very low. Up to 2 d of hydration about 90 % of the total sulphur is present as SO42–. After 91 d this value is reduced to about 36 % while about 28 % are present as S2O32–. In general higher blast-furnace slag content leads to higher concentrations of sulphite and thiosulphate after 7 d.
Das Erzeugen räumlicher Konfigurationen ist eine zentrale Aufgabe im architektonischen bzw. städtebaulichen Entwurfsprozess und hat zum Ziel, eine für Menschen angenehme Umwelt zu schaffen. Der Geometrie der entstehenden Räume kommt hierbei eine zentrale Rolle zu, da sie einen großen Einfluss auf das Empfinden und Verhalten der Menschen ausübt und nur noch mit großem Aufwand verändert werden kann, wenn sie einmal gebaut wurde. Die meisten Entscheidungen zur Festlegung der Geometrie von Räumen werden während eines sehr kurzen Zeitraums (Entwurfsphase) getroffen. Fehlentscheidungen die in dieser Phase getroffen werden haben langfristige Auswirkungen auf das Leben von Menschen, und damit auch Konsequenzen auf ökonomische und ökologische Aspekte.
Mittels computerbasierten Layoutsystemen lässt sich der Entwurf räumlicher Konfigurationen sinnvoll unterstützen, da sie es ermöglichen, in kürzester Zeit eine große Anzahl an Varianten zu erzeugen und zu überprüfen. Daraus ergeben sich zwei Vorteile. Erstens kann die große Menge an Varianten dazu beitragen, bessere Lösungen zu finden. Zweitens kann das Formalisieren von Bewertungskriterien zu einer größeren Objektivität und Transparenz bei der Lösungsfindung führen. Um den Entwurf räumlicher Konfigurationen optimal zu unterstützen, muss ein Layoutsystem in der Lage sein, ein möglichst großes Spektrum an Grundrissvarianten zu erzeugen (Vielfalt); und zahlreiche Möglichkeiten und Detaillierungsstufen zur Problembeschreibung (Flexibilität), sowie Mittel anzubieten, mit denen sich die Anforderungen an die räumliche Konfiguration adäquat beschreiben lassen (Relevanz). Bezüglich Letzterem spielen wahrnehmungs- und nutzungsbezogene Kriterien (wie z. B. Grad an Privatheit, Gefühl von Sicherheit, Raumwirkung, Orientierbarkeit, Potenzial zu sozialer Interaktion) eine wichtige Rolle.
Die bislang entwickelten Layoutsysteme weisen hinsichtlich Vielfalt, Flexibilität und Relevanz wesentliche Beschränkungen auf, welche auf eine ungeeignete Methode zur Repräsentation von Räumen zurückzuführen sind. Die in einem Layoutsystem verwendeten Raumrepräsentationsmethoden bestimmen die Möglichkeiten zur Formerzeugung und Problembeschreibung wesentlich. Sichtbarkeitsbasierte Raumrepräsentationen (Sichtfelder, Sichtachsen, Konvexe Räume) eignen sich in besonderer Weise zur Abbildung von Räumen in Layoutsystemen, da sie einerseits ein umfangreiches Repertoire zur Verfügung stellen, um räumliche Konfigurationen hinsichtlich wahrnehmungs- und nutzungsbezogener Kriterien zu beschreiben. Andererseits lassen sie sich vollständig aus der Geometrie der begrenzenden Oberflächen ableiten und sind nicht an bestimmte zur Formerzeugung verwendete geometrische Objekte gebunden.
In der vorliegenden Arbeit wird ein Layoutsystem entwickelt, welches auf diesen Raumrepräsentationen basiert. Es wird ein Evaluationsmechanismus (EM) entwickelt, welcher es ermöglicht, beliebige zweidimensionale räumliche Konfigurationen hinsichtlich wahrnehmungs- und nutzungsrelevanter Kriterien zu bewerten. Hierzu wurde eine Methodik entwickelt, die es ermöglicht automatisch Raumbereiche (O-Spaces und P-Spaces) zu identifizieren, welche bestimmte Eigenschaften haben (z.B. sichtbare Fläche, Kompaktheit des Sichtfeldes, Tageslicht) und bestimmte Relationen zueinander (wie gegenseitige Sichtbarkeit, visuelle und physische Distanz) aufweisen. Der EM wurde mit Generierungsmechanismen (GM) gekoppelt, um zu prüfen, ob dieser sich eignet, um in großen Variantenräumen nach geeigneten räumlichen Konfigurationen zu suchen. Die Ergebnisse dieser Experimente zeigen, dass die entwickelte Methodik einen vielversprechenden Ansatz zur automatisierten Erzeugung von räumlichen Konfigurationen darstellt: Erstens ist der EM vollständig vom GM getrennt, wodurch es möglich ist, verschiedene GM in einem Entwurfssystem zu verwenden und somit den Variantenraum zu vergrößern (Vielfalt). Zweitens erlaubt der EM die Anforderungen an eine räumliche Konfiguration flexibel zu beschreiben (unterschiedliche Maßstäbe, unterschiedlicher Detaillierungsgrad). Letztlich erlauben die verwendeten Repräsentationsmethoden eine Problembeschreibung vorzunehmen, die stark an der Wirkung des Raumes auf den Menschen orientiert ist (Relevanz).
Die in der Arbeit entwickelte Methodik leistet einen wichtigen Beitrag zur Verbesserung evidenzbasierter Entwurfsprozesse, da sie eine Brücke zwischen der nutzerorientierten Bewertung von räumlichen Konfigurationen und deren Erzeugung schlägt.
Inhaltliche Struktur:
Theoretischer Teil: Um Kulturtechniken des künstlerischen Ausdruckes, und damit den Bezug zwischen Kunst und Medientechnologie zu ergründen, wurde das Verhältnis zwischen dem Betrachter und dem Betrachteten erforscht. Begriffe wie Originalität, Repräsentation, Imitation sowie Aneignung und Rezeption kommen an historischen Beispielen zur Diskussion.
Praktischer Teil: Mit zwei Ausstellungen (Malerei, Installation) wurden verschiedene Modelle des Sehens problematisiert, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur begründen. Außerdem wurden die Unterschiede zwischen Beobachter und Betrachter/Zuschauer in Ausstellungssituationen hinterfragt.
Kurzfassung:
Medientechnologie hat sich selbst zu einer Kunstform entwickelt. Sie kann Künstler dabei unterstützen, ihre Ideen handwerklich umzusetzen (Beispiel: Camera Obscura) und zu reflektieren. Dabei geht es um mehr als um technische Hilfmittel für den künstlerischen Ausdruck. Wird die Beziehung zwischen Betrachter und Betrachtetem als eine Transaktion gesehen, in der beide Begriffe gleichermaßen aufs Spiel gesetzt werden, dann ist es notwendig eine Visualität zu bestimmen, an der der Betrachter (im Sinne von Jonathan Crary) aktiv teilnimmt. Das Sehen darf nicht als absolute Erfahrung verstanden werden, denn einzeln analysiert – ohne Einbeziehung anderer Sinneswahrnehmungen und deren mediale Erweiterungen – führt es zu keinem adäquaten Verständnis davon, wie Bedeutungen produziert werden. Daraus ergibt sich die Forschungsfrage, wie die künstlerische Reaktion auf die im 19. Jahrhundert aufstrebenden Fotografie die Ausdrucksformen beeinflusste und ob sich die gegenseitige Abhängigkeit von Malerei und Fotografie wissenschaftlich-künstlerisch rekonstruieren lässt.
Die theoretische Referenz für diese Forschung bildeten Theorieansätze nicht der Kunstgeschichte, sondern der „Visual Culture Studies“, konkret: Martin Jay („Scopic Regimes of Modernity“), Jonathan Crary („Techniques of the Observer“) und Rosalind Krauss („Originality“).
Dazu wurde die Rezeption der aufkommenden Fotografie in der künstlerischen Produktion beispielhaft untersucht, wobei mit Eugène Delacroix, Gustave Caillebotte sowie dem künstlerischen Dialog zwischen Henri Matisse und Brassai die Problematik herausgearbeitet wurde, mit der sich die bildende Kunst im Lauf jener Jahrzehnte, in denen die Fotografie sich etabliert hat, konfrontiert sah. Sie war eine medientechnische Neuheit mit älteren Wurzeln und diente der Malerei als Hilfsmittel (Camera Obscura) und hat durch ihr technische Potenzial dennoch das Verständnis von Kunst radikal verändert: sie löste das Ideal einer bestimmten Maltechnik ab, die sich mit dem Verbergen des Pinselstriches verband, und bedeutete in diesem gewissen Sinn das „Ende der Kunst“ (nach Paul Delaroche).
Bis in die heutige Kunstproduktion zieht sich die Frage, was nach dem Ende der Perfektionierung von Reproduktion durch ihre Übernahme mittels medientechnischer Apparatur, die nun selbst zum Ausdruck strebt, überhaupt noch ein „Kunstwerk“ ist oder sein kann. Technisch gestützte Formen der Aneignung und Imitation stellen das klassische Wertemodell der meisterlich ausgeführten Repräsentation von Wirklichkeit in Frage, obwohl „Originalität“ angesichts der Flut von Reproduktionen doch immer noch - oder gerade deswegen - eine Wertschätzung erfährt.
Daher wurden dann auch im künstlerischen Teil verschiedene Modelle des Sehens getestet, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur beeinflussen und festlegen. Dabei wurde vor allem auch die Rolle der Beobachter reflektiert - die anders als bei Unterhaltungsmedien - in Kunstkontexten eben keine passiven Zuschauer sind. Was den Künstler, und was den Betrachter von Kunst definiert, lässt sich gleichwohl weder auf ein bestimmte Sinnlichkeit noch eine bestimmte Medientechnologie reduzieren.
Wie schon nach dem Aufkommen der Fotografie werden Künstler weiterhin auf der Suche nach neuen Ausdrucksformen sein, um andere Weltwahrnehmungen und neue, andere Perspektiven menschlicher Existenz zu erlangen. Mediale Technologien haben sie dabei immer schon unterstützt. Aus meiner Untersuchung schließe ich, dass neue Technologien Kunst nicht definitv beeinflussen, wohl aber ihren Entstehungsprozess verändern und beeinflussen können. Die Frage, wie das geschieht und welche Effekte es zeitigt, bedarf einer stets erneuerten Verhandlung.
Daraus folgt die Schlussfolgerung, dass man von Künstlern verlangen kann oder sogar muss, sich vor der Wirklichkeit der Technologie nicht zurückzuziehen, sondern sich medientechnische Kompetenzen anzueignen und sich aktiv am Diskurs um neue Technologien zu beteiligen.
Die Ph.D.-Arbeit Soziales Grafikdesign – eine Frage der Haltung hinterfragt den Einfluss und die Wirkungsmacht, den visuelle Kommunikationsgestaltung auf den Betrachter und im weiteren Sinne auf die Gesellschaft im Ganzen haben können. Aufbauend auf den Erkenntnissen über die Wirkungsmacht wird untersucht, wie eine bewusste und sozial verantwortliche Haltung im Grafikdesign aussehen könnte.
Viele Grafikdesigner sind in der Werbebranche tätig und haben den Auftrag, ganz bewusst manipulativ und wirkungsstark Informationen visuell zu übersetzen, um den Betrachter zu einer Handlungsfolge zu animieren. Die bewusste Reflexion der eigenen Rolle als Designer in diesem Prozess führt immer wieder zu den Fragen nach der Verantwortlichkeit des Gestalters und auch dazu, wie der Gestalter die Potenziale der Kommunikationsgestaltung in anderen Bereichen, wie z. B. in städtischen Problemsituationen, für ein soziales Miteinander einsetzen kann.
Einfluss der Porosität von Beton auf den Ablauf einer schädigenden Alkali-Kieselsäure-Reaktion
(2016)
Der Dissertation liegt die Frage zugrunde, welchen Einfluss die Porosität von Beton auf den Ablauf einer schädigenden AKR hat. Insbesondere soll geklärt werden, ob der Einsatz von Gleitschalungsfertigern – anstelle von klassischen schienengeführten Betondeckenfertigern – und die damit verbundene verringerte Porosität der Betone den Ablauf einer schädigenden AKR begünstigt. Eine verringerte Porosität führt zu einer reduzierten Duktilität des Betons, so dass infolge AKR entstehende Zugspannungen schlechter abgebaut werden können. Weiterhin steht ein geringerer Expansionsraum für das entstehende AKR-Gel zur Verfügung. Diese Faktoren können den Ablauf einer AKR begünstigen. Allerdings können extern anstehende Alkalien schlechter in den Beton mit einer verringerten Porosität eindringen. Ferner wird die Diffusion der Alkalien zu den potenziell reaktiven Gesteinskörnungen verlangsamt.
Zur Beantwortung der aufgeworfenen Frage wird unter Einsatz einer neuartigen Prüfmethodologie und bei variierender Porosität untersucht, welche Schädigungsparameter maßgebend für den Ablauf und die Intensität einer schädigenden AKR sind. Die berücksichtigten Schädigungsparameter sind die mechanischen Eigenschaften des Betons, der zur Verfügung stehende Expansionsraum und die im Beton ablaufenden Transportvorgänge. Um den Einfluss der jeweiligen Schädigungsparameter spezifizieren zu können, gehen die Prüfungen einerseits von einem hohen internen und andererseits von einem hohen externen AKR-Schädigungspotenzial aus. In beiden Fällen erfolgen die Untersuchungen an langsam reagierenden alkaliempfindlichen Gesteinskörnungen. Die unterschiedlichen Porositäten ergeben sich hauptsächlich durch Variation des w/z-Wertes.
Bei dem hohen internen AKR-Schädigungspotenzial stehen die mechanischen Eigenschaften und der Expansionsraum im Vordergrund; außerdem ist der Einfluss der Zugabe eines LP-Bildners zu analysieren. Um ein hohes internes AKR-Schädigungspotenzial zu erreichen, kommt bei der Herstellung der Betonprobekörper ein Zement mit einem hohen Alkaligehalt zum Einsatz. Die Betonprobekörper werden der 40 °C-Nebelkammerlagerung und dem 60 °C-Betonversuch über Wasser unterzogen. Dabei findet eine neue Prüfmethodologie Anwendung, die der kontinuierlichen Messung der Dehnung und der ablaufenden Erhärtungs- und Rissbildungsprozesse dient. Diese Prüfmethodologie umfasst die Messung der Ultraschallgeschwindigkeit, die Schallemissionsanalyse und die µ-3D-Computertomografie.
Hingegen richtet sich der Fokus bei dem hohen externen AKR-Schädigungspotenzial auf die Transportvorgänge. Zur Provokation eines hohen externen AKR-Schädigungspotenzials werden die Probekörper der FIB-Klimawechsellagerung ausgesetzt.
Nanostructured materials are extensively applied in many fields of material science for new industrial applications, particularly in the automotive, aerospace industry due to their exceptional physical and mechanical properties. Experimental testing of nanomaterials is expensive, timeconsuming,challenging and sometimes unfeasible. Therefore,computational simulations have been employed as alternative method to predict macroscopic material properties. The behavior of polymeric nanocomposites (PNCs) are highly complex.
The origins of macroscopic material properties reside in the properties and interactions taking place on finer scales. It is therefore essential to use multiscale modeling strategy to properly account for all large length and time scales associated with these material systems, which across many orders of magnitude. Numerous multiscale models of PNCs have been established, however, most of them connect only two scales. There are a few multiscale models for PNCs bridging four length scales (nano-, micro-, meso- and macro-scales). In addition, nanomaterials are stochastic in nature and the prediction of macroscopic mechanical properties are influenced by many factors such as fine-scale features. The predicted mechanical properties obtained by traditional approaches significantly deviate from the measured values in experiments due to neglecting uncertainty of material features. This discrepancy is indicated that the effective macroscopic properties of materials are highly sensitive to various sources of uncertainty, such as loading and boundary conditions and material characteristics, etc., while very few stochastic multiscale models for PNCs have been developed. Therefore, it is essential to construct PNC models within the framework of stochastic modeling and quantify the stochastic effect of the input parameters on the macroscopic mechanical properties of those materials.
This study aims to develop computational models at four length scales (nano-, micro-, meso- and macro-scales) and hierarchical upscaling approaches bridging length scales from nano- to macro-scales. A framework for uncertainty quantification (UQ) applied to predict the mechanical properties
of the PNCs in dependence of material features at different scales is studied. Sensitivity and uncertainty analysis are of great helps in quantifying the effect of input parameters, considering both main and interaction effects, on the mechanical properties of the PNCs. To achieve this major
goal, the following tasks are carried out:
At nano-scale, molecular dynamics (MD) were used to investigate deformation mechanism of glassy amorphous polyethylene (PE) in dependence of temperature and strain rate. Steered molecular dynamics (SMD)were also employed to investigate interfacial characteristic of the PNCs.
At mico-scale, we developed an atomistic-based continuum model represented by a representative volume element (RVE) in which the SWNT’s properties and the SWNT/polymer interphase are modeled at nano-scale, the surrounding polymer matrix is modeled by solid elements. Then, a two-parameter model was employed at meso-scale. A hierarchical multiscale approach has been developed to obtain the structure-property relations at one length scale and transfer the effect to the higher length
scales. In particular, we homogenized the RVE into an equivalent fiber.
The equivalent fiber was then employed in a micromechanical analysis (i.e. Mori-Tanaka model) to predict the effective macroscopic properties of the PNC. Furthermore, an averaging homogenization process was also used to obtain the effective stiffness of the PCN at meso-scale.
Stochastic modeling and uncertainty quantification consist of the following ingredients:
- Simple random sampling, Latin hypercube sampling, Sobol’ quasirandom sequences, Iman and Conover’s method (inducing correlation in Latin hypercube sampling) are employed to generate independent and dependent sample data, respectively.
- Surrogate models, such as polynomial regression, moving least squares (MLS), hybrid method combining polynomial regression and MLS, Kriging regression, and penalized spline regression, are employed as an approximation of a mechanical model. The advantage of the surrogate models is the high computational efficiency and robust as they can be constructed from a limited amount of available data.
- Global sensitivity analysis (SA) methods, such as variance-based methods for models with independent and dependent input parameters, Fourier-based techniques for performing variance-based methods and partial derivatives, elementary effects in the context of local SA, are used to quantify the effects of input parameters and their interactions on the mechanical properties of the PNCs. A bootstrap technique is used to assess the robustness of the global SA methods with respect to their performance.
In addition, the probability distribution of mechanical properties are determined by using the probability plot method. The upper and lower bounds of the predicted Young’s modulus according to 95 % prediction intervals were provided.
The above-mentioned methods study on the behaviour of intact materials. Novel numerical methods such as a node-based smoothed extended finite element method (NS-XFEM) and an edge-based smoothed phantom node method (ES-Phantom node) were developed for fracture problems. These methods can be used to account for crack at macro-scale for future works. The predicted mechanical properties were validated and verified. They show good agreement with previous experimental and simulations results.
Die vorliegende Arbeit fokussiert die Optimierung freigeformter adaptiver Faserverbundflächentragwerke auf Basis einer entwickelten und auf einem parametrischen Gesamtmodell basierenden Entwurfsmethode. Die Übertragung adaptiver, natürlich inspirierter Vorgänge stellt eine weitreichende Inspirationsquelle dar. Adaptive Tragwerke können unter Anwendung von Smart Materials als materialsparende, filigrane Tragwerke ausgeführt werden. Die Erfüllung der Grenzzustände der Tragfähigkeit und der Gebrauchstauglichkeit wird nicht allein über die Querschnittsabmessungen sichergestellt. Die notwendige Bauteilsteifigkeit kann vielmehr durch Eintragung von Aktivierungsenergie (Operational Energy) realisiert werden. Auf diese Weise kann die aufgrund der Bauteilabmessungen gebundene Energie (Embodied Energy) minimiert werden. Die entwickelte Entwurfsmethode ermöglicht die Auslegung und Optimierung materialminimierter Schalentragwerke in einem mehrstufigen Prozess. Hierbei wird aus tragwerksplanerischer Sicht die numerische Formfindung, die statische Berechnung und die Aktor- und Sensorpositionierung berechnet. Zudem werden Analysen hinsichtlich der Nachhaltigkeit auf Basis einer Lebenszyklusanalyse durchgeführt. Aufgrund der unterschiedlichen, sich aber gegenseitig beeinflussenden Kriterien, ist eine Optimierung durchzuführen. In der vorliegenden Arbeit wird ein Ansatz zur Definition zulässiger Ökobilanzkennwerte von Smart Materials auf Basis der Energiedifferenz zwischen einer passiven und einer adaptiven Struktur vorgestellt. Anhand dieser Kennwerte kann die Entwicklung zukünftiger Smart Materials unter dem Aspekt der ganzheitlichen Nachhaltigkeit erfolgen. Die Allgemeingültigkeit und Übertragbarkeit der Entwurfsmethode auf weitere Tragsysteme im Bauwesen und speziell anderer Materialkonstellationen wird anhand verschiedener Beispiele aufgezeigt.
Superplasticizers are utilized both to improve the fluidity during the placement and to reduce the water content of concretes. Both effects have also an impact on the properties of the hardened concrete. As a side effect the presence of superplasticizers affects the strength development of concretes that is strongly retarded. This may lead to an ecomomical drawback of the concrete manufacturing. The present work is aimed at gaining insights on the causes of the retarding effect of superplasticizers on the hydration of Portland cement. In order to simplify the complex interactions occurring during the hydration of Portland cement the majority of the work focuses on the interaction of superplasticizer and tricalcium silicate (Ca3SiO5 or C3S, the main compound of Portland cement clinker). The tests are performed in three main parts accompanied by methods as for example isothermal conduction calorimetry, electrical conductivity, Electron Microscopy, ICP-OES, TOC, as well as Analytical Ultracentrifugation.
In the first main part and based on the interaction of cations and anionic charges of polymers, the interactions between calcium ions and superplasticizers are investigated. As a main effect calcium ions are complexed by the functional groups of the polymers (carboxy, sulfonic). Calcium ions may be both dissolved in the aqueous phase and a constitute of particle interfaces. Besides these effects it is furthermore shown that superplasticizers induce the formation of nanoscaled particles which are dispersed in the aqueous phase (cluster formation). Analogous to recent findings in the field of biomineralization, it is reasonable to assume that these nanoparticles influence the crystal growth by their assembly process.
Based on the assumption that superplasticizers hinder either or both dissolution and precipitation and by that retard the cement hydration, the impact on separate reactions is investigated. On experiments that address the solubility of C-S-H phases and portlandite, it is shown that complexation of calcium ions in the aqueous phase by functional groups of polymers increases the solubility of portlandite. Contrary, in case of C-S-H solubility the complexation of calcium ions in solution leads to decrease of the calcium ion concentration in the aqueous phase. These effects are explained by differences in adsorption of polymers on C-S-H phases and portlandite. It is proposed that adsorption is stronger on C-S-H phases compared to portlandite due to the increased specific surface area of C-S-H phases. Following that, it is claimed that before polymers are able to adsorb on C-S-H phases the functional groups must be screened by calcium ions in the aqueous phase. It is further shown that data regarding the impact of superplasticizers on the unconstrained dissolution rate of C3S does not provide a clear relation to the overall retarding effect occurring during the hydration of C3S. Both increased and decreased dissolution rate with respect to the reference sample are detected. If the complexation capability of the superplasticizers is considered then also a reduced dissolution rate of C3S is determined. Despite the fact that the global hydration process is accelerated, the addition of calcite leads to a slower dissolution rate. Thus, a hindered unconstrained dissolution of C3S as possibly cause for the retarding effect still remains open for discussion. In the last section of this part, the pure crystallization of hydrate phases (C-S-H phases, portlandite) is fathomed. Results clearly show that superplasticizers prolong the induction time and modify the rate of crystal growth during pure crystallization in particular due to the complexation of ions in solution. But this effect is insufficient to account for the overall retarding effect. Further important factors are the blocking of crystal growth faces by adsorbed polymers and the dispersion of nanoscaled particles which hinders their agglomeration in order to build up crystals.
In the last main part of the work, the previously gathered results are utilized in order to investigate hydration kinetics. During hydration, dissolution and precipitation occur in parallel. Thereby, special attention is laid on the ion composition of the aqueous phase of C3S pastes and suspensions in order to determine the rate limiting step. All in all it is concluded that the retarding effect of superplasticizers on the hydration of tricalcium silicate is based on the retardation of crystallization of hydrate phases (C-S-H phases and portlandite). Thereby, the two effects complexation of calcium ions on surfaces and stabilization of nanoscaled particles are of major importance. These mechanisms may partly be compensated by template performance and increase in solubility by complexation of ions in solution. The decreased dissolution rate of C3S by the presence of superplasticizers during the in parallel occuring hydration process can only be assessed indirectly by means of the development of the ion concentrations in the aqueous phase (reaction path). Whether this observation is the cause or the consequence within the dissolution-precipitation process and therefore accounts for the retarding effect remains a topic for further investigations.
Besides these results it is shown that superplasticizers can be associated chemically with inhibitors because they reduce the frequency factor to end the induction period. Because the activation energy is widely unaffected it is shown that the basic reaction mechanism sustain. Furthermore, a method was developed which permits for the first time the determination of ion concentrations in the aqueous phase of C3S pastes in-situ. It is shown that during the C3S hydration the ion concentration in the aqueous phase is developed correspondingly to the heat release rate (calorimetry). The method permits the differentiation of the acceleration period in three stages. It is emphasized that crystallization of the product phases of C3S hydration, namely C-S-H phases and portlandite, are responsible for the end of the induction period.
In der Ph.D.-Arbeit wird gefragt, wie verschieden gestaltete Landschaften heute erlebt werden und wie sie auf die Menschen wirken. Dafür wird die Atmosphärentheorie erweitert und auf Landschaften angewendet. Atmosphären sind räumliche Stimmungsqualitäten, geprägt von der Umgebung, welche Menschen beeinflussen. Es wird ein Modell entwickelt, welches die Prägung von Atmosphären auf massiver, mobiler und ephemer Ebene beschreibt. Mit künstlerischen Arbeiten werden Atmosphären verschiedener anthropogener Landschaften übersetzt. Mit der exemplarischen wie theoretischen Bearbeitung von landschaftsverbundenen Atmosphären wird die Korrelation von Menschen und Umgebung nachgewiesen.
Methods based on B-splines for model representation, numerical analysis and image registration
(2015)
The thesis consists of inter-connected parts for modeling and analysis using newly developed isogeometric methods. The main parts are reproducing kernel triangular B-splines, extended isogeometric analysis for solving weakly discontinuous problems, collocation methods using superconvergent points, and B-spline basis in image registration applications.
Each topic is oriented towards application of isogeometric analysis basis functions to ease the process of integrating the modeling and analysis phases of simulation.
First, we develop reproducing a kernel triangular B-spline-based FEM for solving PDEs. We review the triangular B-splines and their properties. By definition, the triangular basis function is very flexible in modeling complicated domains. However, instability results when it is applied for analysis. We modify the triangular B-spline by a reproducing kernel technique, calculating a correction term for the triangular kernel function from the chosen surrounding basis. The improved triangular basis is capable to obtain the results with higher accuracy and almost optimal convergence rates.
Second, we propose an extended isogeometric analysis for dealing with weakly discontinuous problems such as material interfaces. The original IGA is combined with XFEM-like enrichments which are continuous functions themselves but with discontinuous derivatives. Consequently, the resulting solution space can approximate solutions with weak discontinuities. The method is also applied to curved material interfaces, where the inverse mapping and the curved triangular elements are considered.
Third, we develop an IGA collocation method using superconvergent points. The collocation methods are efficient because no numerical integration is needed. In particular when higher polynomial basis applied, the method has a lower computational cost than Galerkin methods. However, the positions of the collocation points are crucial for the accuracy of the method, as they affect the convergent rate significantly. The proposed IGA collocation method uses superconvergent points instead of the traditional Greville abscissae points. The numerical results show the proposed method can have better accuracy and optimal convergence rates, while the traditional IGA collocation has optimal convergence only for even polynomial degrees.
Lastly, we propose a novel dynamic multilevel technique for handling image registration. It is application of the B-spline functions in image processing. The procedure considered aims to align a target image from a reference image by a spatial transformation. The method starts with an energy function which is the same as a FEM-based image registration. However, we simplify the solving procedure, working on the energy function directly. We dynamically solve for control points which are coefficients of B-spline basis functions. The new approach is more simple and fast. Moreover, it is also enhanced by a multilevel technique in order to prevent instabilities. The numerical testing consists of two artificial images, four real bio-medical MRI brain and CT heart images, and they show our registration method is accurate, fast and efficient, especially for large deformation problems.
The refurbishment of old buildings often goes hand in hand with an increase in both the dead and live loads. The latter, combined with the higher safety factors, often make the reinforcement of the old structures necessary. Most reinforcement methods involve transforming a structural timber member into a composite beam. Composite sections have a long tradition in timber construction. In the early days, multiple timber beams were connected with interlocking tooth and wooden shear connecters, which resulted in an elastic connection. Although historical timber structures are frequently upgraded, no method has yet been established and fully accepted by all stakeholders such as owners, builders, architects, engineers and cultural heritage organisations. Carbon fibre-reinforced polymers (CFRP) have already shown their efficiency in structural reinforcement especially in concrete structures. Moreover, previous studies have shown that CFRP has the potential to meet the expectations of all parties involved.
In order to reach the service-limit state, a high amount of carbon fibres has to be used, or considering the cost of reinforcement, prestress has to be applied. However, prestressing often goes hand-in-hand with delaminating issues. The camber method presented here offers an efficient solution for prestressing timber bending members and overcoming the known obstacles.
In the method proposed, the timber beam is cambered using an adjustable prop at midspan during the bonding of the CRFP-lamella to the lower side of the bending member. After curing the adhesive, the prop is removed and the prestressed composite beam is ready to be used. The prestress introduced in the system is not constant, but has a triangular shape and peaks at midspan, where it is used the most. The prestress force, which declines towards the end of the beam, leads to a constant shear stress over the whole length of the reinforcement,avoiding a concentrated anchorage zone.
An analytical calculation model has been developed to calculate and design prestressed timber-
bending members using the camber method. Numerical modelling, using a multi-surface plasticity model for timber, confirmed the results from the analytical model, and clearly reduced delaminating issues, comparing very favourably to traditional prestressing methods. The experimental parametric study, including the determination of the short-term loadbearing capacity of structural-sized beams, showed agreement with the analytical and numerical calculation. The prestressed reinforcement showed a benefit of nearly 50% towards the ultimate-limit state and up to 70% towards the service-limit state. Calculations revealed that the use of high modulus CFRP allows even higher benefits, depending on the configurations and requirements. The long-term design of the prestressed composite beam was investigated by extending the analytical model. The creep of the timber leads to a load transfer from the timber towards the CFRP, and therefore increases the benefit towards the ultimatelimit design. Applying high modulus CFRP-lamellas allows for a complete utilisation of the
design capacity of timber and carbon fibre-reinforced polymer.
The thorough investigation conducted demonstrated that the camber method is an efficient technique for prestressing and reinforcing timber-bending members. Furthermore, the calculation model presented allows for a safe design and estimation of long-term behaviour.
This thesis presents new interactive visualization techniques and systems intended to support users with real-world decisions such as selecting a product from a large variety of similar offerings, finding appropriate wording as a non-native speaker, and assessing an alleged case of plagiarism.
The Product Explorer is a significantly improved interactive Parallel Coordinates display for facilitating the product selection process in cases where many attributes and numerous alternatives have to be considered. A novel visual representation for categorical and ordered data with only few occurring values, the so-called extended areas, in combination with cubic curves for connecting the parallel axes, are crucial for providing an effective overview of the entire dataset and to facilitate the tracing of individual products. The visual query interface supports users in quickly narrowing down the product search to a small subset or even a single product. The scalability of the approach towards a large number of attributes and products is enhanced by the possibility of setting some constraints on final attributes and, therefore, reducing the number of considered attributes and data items. Furthermore, an attribute repository allows users to focus on the most important attributes at first and to bring in additional criteria for product selection later in the decision process. A user study confirmed that the Product Explorer is indeed an excellent tool for its intended purpose for casual users.
The Wordgraph is a layered graph visualization for the interactive exploration of search results for complex keywords-in-context queries. The system relies on the Netspeak web service and is designed to support non-native speakers in finding customary phrases. Uncertainties about the commonness of phrases are expressed with the help of wildcard-based queries. The visualization presents the alternatives for the wildcards in a multi-column layout: one column per wildcard with the other query fragments in between. The Wordgraph visualization displays the sorted results for all wildcards at once by appropriately arranging the words of each column. A user study confirmed that this is a significant advantage over simple textual result lists. Furthermore, visual interfaces to filter, navigate, and expand the graph allow interactive refinement and expansion of wildcard-containing queries.
Furthermore, this thesis presents an advanced visual analysis tool for assessing and presenting alleged cases of plagiarism and provides a three-level approach for exploring the so-called finding spots in their context. The overview shows the relationship of the entire suspicious document to the set of source documents. An intermediate glyph-based view reveals the structural and textual differences and similarities of a set of finding spots and their corresponding source text fragments. Eventually, the actual fragments of the finding spot can be shown in a side-by-side view with a novel structured wrapping of both the source, as well as the suspicious text. The three different levels of detail are tied together by versatile navigation and selection operations. Reviews with plagiarism experts confirm that this tool can effectively support their workflow and provides a significant improvement over existing static visualizations for assessing and presenting plagiarism cases.
The three main contributions of this research have a lot in common aside from being carefully designed and scientifically grounded solutions to real-world decision problems. The first two visualizations facilitate the decision for a single possibility out of many alternatives, whereas the latter ones deal with text at varying levels of detail. All visual representations are clearly structured based on horizontal and vertical layers contained in a single view and they all employ edges for depicting the most important relationships between attributes, words, or different levels of detail. A detailed analysis considering the context of the established decision-making literature reveals that important steps of common decision models are well-supported by the three visualization systems presented in this thesis.
This thesis applies the theory of \psi-hyperholomorphic functions dened in R^3 with values in the set of paravectors, which is identified with the Eucledian space R^3, to tackle some problems in theory and practice: geometric mapping properties, additive decompositions of harmonic functions and applications in the theory of linear elasticity.
Die Bau-Ausstellung zu Beginn des 20. Jahrhunderts oder „Die Schwierigkeit zu wohnen“, so lautet der Titel der Arbeit und legt damit ihren Fokus offen. Sie betrachtet ein um 1900 aufkommendes Ausstellungsphänomen in seinen ersten Dekaden; in einer Zeit, in der das Wohnen problematisiert wurde.
Der Praxis des Wohnens ist Anfang des 20. Jahrhunderts seine Selbstverständlichkeit abgesprochen worden. Die Bau-Ausstellung wird als ein Symptom dieses Verlusts interpretiert und zugleich als Versuch, ihm entgegenzuwirken. Statt sie innerdisziplinär als eine architekturgeschichtliche Episode der Moderne rein positivistisch zu beschreiben, legt die vorliegende Arbeit im Typus der Bau-Ausstellung eine weit reichende Problematik frei, die kulturphilosophische ebenso wie medientheoretische Dimensionen hat: Inwieweit lässt sich das Wohnen überhaupt ausstellen? Wie kann man eine alltägliche Praxis, die kaum eine Definition erlaubt, zeigen? Den Umgang mit dieser Aporie untersucht die Arbeit.
Abstract
In this research, based on socio-spatiality as the starting point, it has conducted extensive city space analysis to advance a new urban social space theory. Resting upon the basis of traditional continent philosophy, this social space theory has adopted the structuration methods, at the same time trying to build certain combination between theoretical frame work establishment and empirical observations. Therefore, the socio-spatial transition study is neither a macro theory of traditional structuralism nor a typology of urban planning theory, or a positivism social geography, but an operative theory on practical purpose. Firstly, what’s distinct from the traditional structuralism is that this study examines the endless transiting structural relations, not macroscopic narrations of absolute definition and structure. In fact, any city and space are always co-existed in their structurational transiting relationship, thus research in transition has become the main body of this study. And case study is a must for research in transition, as part of efforts to apply the structuration concept into practice reason. Secondly, this study first establishes the fundamental structuration concept of socio-spatial transition, which, as an operative tool, is applied to conduct transition analysis on specific case about the City of Beijing. Therefore, as a social space theory, referring to as science, remains criticism of traditional continent philosophy. However, this criticism did not working on the level of ideology or conceptions, but on transiting under structural relations, keeping it from incompetent ideology criticism of continental critical theory. Unfortunately contemporary urban and space development have now gone extremely unbalanced under a background of globalization; yet traditional macro theories are incapable of either producing significant impact on practice or helping people identify practical problems. While facing general issues, particularly the Chinese urban issue category established on a meta-structured city mode, the micro-case study has plunged into dilemma for unknowing either to ask questions or to answer questions. Therefore, this study is set to identify dilemma and find direction for future relevant research. In this dissertation, Beijing is used as a model, and structuration methods as tools. It has extensively analyzed the social-spatial transition of the city space of Beijing, acquiring brand-new knowledge of its urban space development. It is helpful to an in-depth understanding of the city space development not only in Beijing, but also in many other cities that were influenced by the capital model of Beijing. Since the start of reform and opening-up, China has created a unique development mode of the new-styled metropolitan and urbanization in history. This research is expected to analyze or decode what China’s urban development in between communal space and associative space.
In der vorliegenden Arbeit werden Manifestäußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgewählter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Darüber hinaus wird die Fähigkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenwärtiger, aber auch als Wegbereiter zukünftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.
As human thought was developing, likewise, the technology used for illumination was growing. But a haul through history, reviewing its pages and analyzing it, inherently brings up old and new question, like: Is it possible to alter negatively the image of historic buildings and monuments through inadequate lighting to the degree of distorting the perception that people have of the work? and if so, what are the causes that generate it? Do the light designers take into consideration criteria to protect not only historic buildings and monuments, but also the environment? What are the consequences that may generate the inadequate lighting of urban heritage to the environment? What are the factors to consider for a proper illumination of urban heritage? The answers to these questions will help lay the foundation for proper illumination of the urban heritage, avoiding at the maximum the light pollution and the effects that it generates, seeking a balance and harmonious reconciliation between the technology, urban heritage and environment, taking as a framework and the case study the urban heritage of a city from the colonial era in southern Mexico, with pre-Hispanic roots and where today you can still see through its streets and buildings an atmosphere of mysticism reflection of their folklore and traditions, this city is known as Chiapa de Corzo, Chiapas.
In der vorliegenden Arbeit werden Manifestäußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgewählter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Darüber hinaus wird die Fähigkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenwärtiger, aber auch als Wegbereiter zukünftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.
The conservation of living heritage sites is a highly complex process. Two factors need careful consideration in order to achieve a balance in the management of such sites: the conservation demands of conservation experts for built heritage and the needs of local people for development of their heritage living space. The complexity of factors involved make for an interesting study of living heritage, taken up by this research in its main case study of the town of Nan in Thailand.
Research into the historical background of Nan and its cultural heritage reveals a living heritage site, which is both unique and diverse. Present day Nan was examined using a variety of analysis tools, which were applied to data from interviews, empirical data, field surveys, and documents, in order to better understand the nature of the living heritage site and changing trends over time. Luang Prabang in Lao PDR, a World Heritage site since 1995, was also selected as a further case study with which to compare Nan’s potential World Heritage status from a point of view of changes to living heritage attributes.
The outcomes of the research indicate the importance of the management of the sites, which can be at risk of losing balance by focusing on one aspect of heritage to the detriment of the other. The conservation perspective, if allowed to dominate, as in Luang Prabang, can cause irreparable damage to the social fabric, where the development needs of the town are not met. This research concludes that a balance of power amongst stakeholders in the collaborative networks managing such sites is vital to sustaining a balance of living heritage attributes.
Abstract
This doctoral thesis defines the relationship between the urban and rural in the 21st century, and focuses on food as a key component. The fact that food is, for the most part, produced in the countryside and then transported to the city has a significant influence on this very unbalanced relationship today. The main goal was to show that it is necessary to bring agriculture, urban gardening, the breeding of domestic farm animals, and beekeeping back to the city, which would have a positive affect on both the city and the countryside. All of this is already taking place at the local level, within the neighbourhoods of our cities and through the work of self-organised activities and initiatives, which have been taken up by city residents themselves. One example of this is the community garden, a new model of gardening which offers fertile ground for growing vegetables and to test various forms of co-existence, different ways of designing spaces, the creation of alternative values, and a positive vision for the future of city residents.
In 2010, I co-created the community urban garden Beyond a Construction Site, which is the central part of this artistic research. Throughout the entire four-year process of creating this community garden, theory and artistic practice were intertwined, and informed one another. This community garden is an example of a self-organised and self-managed community space located in a residential neighbourhood in the centre of the city of Ljubljana, and as such is a typical example of urbanism from the bottom up. I placed the creation and development of our community garden in a dialogue with the formal way of arranging urban gardening in Ljubljana, a top-down approach, which the city has been carrying out intensively since 2007. I compared the solutions being proposed by the city of Ljubljana for organising urban gardening with the way it is organised in other European cities, the UK, and the USA. I also researched the recent rapid growth of self-organised initiatives which are focused on the local production of food and seek to find more economic and ecologically friendly models to visibly influence the future of cities and the countryside. Here, community gardens play an important role, as in addition to the production of food they are also spaces for the criticism of existing urban policies, a self-organised revitalisation of neglected spaces, and places of resilience, because they differ from that which real estate agencies, large financial companies, and city authorities desire them to be.
The community garden Beyond a Construction Site has become living proof that, through a group action, the residents of a neighbourhood can influence existing city policies and the future of both their own neighbourhood and that of the entire city. The initiators of this garden are artists and architects, and we began this community garden in the context of an art festival, which also shows that art can influence the processes of everyday life and help to create much needed spaces within cities to serve various purposes. Our community garden has also shown itself to be an important platform for the exchange of knowledge on organic gardening, ecology in everyday life, and critical architecture, as well as serving to connect related initiatives. Together with these other initiatives we are stronger, and are influencing structural changes within city politics, thereby also co-creating the future of Ljubljana. This community garden is helping us to redefine our relationship with the city and re-awaken the desires and actions of residents connected with realising their fundamental right, the right to the city.
My other artworks, which I am presenting in the context of this doctoral thesis, show an optimistic vision for the future of cities. The video animations Back to the City (2011) and The Right Balance (2013), as well as the accompanying collages, visualise a city of the future where urban and rural practices live together side-by-side. This vision is being realised by city residents themselves, with their active participation in the creation of community gardens, growing their own vegetables, urban beekeeping, and by having egg-laying hens in their gardens. My desire was also to present the theoretical concept and scientific research to a non-academic public, and to people without specialised training. Using the method of storytelling I included knowledge from the research into the video animations and collages. In this way my artistic work, with an intentional playfulness, challenges today’s faith in science and theoretical concepts, as well as directing attention to working with common sense, with one’s own hands, and with the earth. This can contribute to a change in the still dominant anthropocentric view of nature, which is an urgently needed change for our future.
Keywords: rural, urban agriculture, community gardens, urban beekeeping, the bottom-up approach to urban planning, alternative spaces
In der vorliegenden Ph.D.-Arbeit werden die Bereiche Materialität, Objektkultur und Physical Computing adressiert. Der Autor erkennt nun durch die durchlaufene intensive theoretische Betrachtungsweise des Themas Materialität die Bedeutung von Tastsinn und Objektoberflächen für den Alltag des praktizierenden Gestalters und proklamiert eine Wende und Hinwendung der Designpraxis zu den Potenzialen von Materialität und deren Bedeutung für die Akteure. Die Aufgabe der Praxisforschung ist es, eine inklusive Optimierungsmethode des Produktdesigns zu gestalten, mit der Designentwicklungen durch überprüfbare Nutzungsdaten optimiert werden können. Die taktile Pilotmethode ergab auf Basis der Generierung von Nutzerkarten Erkenntnisse über biometrische Werte, individuelle Körpergrößen und unterschiedliche Handhabungsprinzipien.
One major research focus in the Material Science and Engineering Community in the past decade has been to obtain a more fundamental understanding on the phenomenon 'material failure'. Such an understanding is critical for engineers and scientists developing new materials with higher strength and toughness, developing robust designs against failure, or for those concerned with an accurate estimate of a component's design life. Defects like cracks and dislocations evolve at
nano scales and influence the macroscopic properties such as strength, toughness and ductility of a material. In engineering applications, the global response of the system is often governed by the behaviour at the smaller length scales. Hence, the sub-scale behaviour must be computed accurately for good predictions of the full scale behaviour.
Molecular Dynamics (MD) simulations promise to reveal the fundamental mechanics of material failure by modeling the atom to atom interactions. Since the atomistic dimensions are of the order of Angstroms ( A), approximately 85 billion atoms are required to model a 1 micro- m^3 volume of Copper. Therefore, pure atomistic models are prohibitively expensive with everyday engineering computations involving macroscopic cracks and shear bands, which are much larger than the atomistic length and time scales. To reduce the computational effort, multiscale methods are required, which are able to couple a continuum description of the structure with an atomistic description. In such paradigms, cracks and dislocations are explicitly modeled at the atomistic scale, whilst a self-consistent continuum model elsewhere.
Many multiscale methods for fracture are developed for "fictitious" materials based on "simple" potentials such as the Lennard-Jones potential. Moreover, multiscale methods for evolving cracks are rare. Efficient methods to coarse grain the fine scale defects are missing. However, the existing multiscale methods for fracture do not adaptively adjust the fine scale domain as the crack propagates. Most methods, therefore only "enlarge" the fine scale domain and therefore drastically increase computational cost. Adaptive adjustment requires the fine scale domain to be refined and coarsened. One of the major difficulties in multiscale methods for fracture is to up-scale fracture related material information from the fine scale to the coarse scale, in particular for complex crack problems. Most of the existing approaches therefore were applied to examples with comparatively few macroscopic cracks.
Key contributions
The bridging scale method is enhanced using the phantom node method so that cracks can be modeled at the coarse scale. To ensure self-consistency in the bulk, a virtual atom cluster is devised providing the response of the intact material at the coarse scale. A molecular statics model is employed in the fine scale where crack propagation is modeled by naturally breaking the bonds. The fine scale and coarse scale models are coupled by enforcing the displacement boundary conditions on the ghost atoms. An energy criterion is used to detect the crack tip location. Adaptive refinement and coarsening schemes are developed and implemented during the crack propagation. The results were observed to be in excellent agreement with the pure atomistic simulations. The developed multiscale method is one of the first adaptive multiscale method for fracture.
A robust and simple three dimensional coarse graining technique to convert a given atomistic region into an equivalent coarse region, in the context of multiscale fracture has been developed. The developed method is the first of its kind. The developed coarse graining technique can be applied to identify and upscale the defects like: cracks, dislocations and shear bands. The current method has been applied to estimate the equivalent coarse scale models of several complex fracture patterns arrived from the pure atomistic simulations. The upscaled fracture pattern agree well with the actual fracture pattern. The error in the potential energy of the pure atomistic and the coarse grained model was observed to be acceptable.
A first novel meshless adaptive multiscale method for fracture has been developed. The phantom node method is replaced by a meshless differential reproducing kernel particle method. The differential reproducing kernel particle method is comparatively more expensive but allows for a more "natural" coupling between the two scales due to the meshless interpolation functions. The higher order continuity is also beneficial. The centro symmetry parameter is used to detect the crack tip location. The developed multiscale method is employed to study the complex crack propagation. Results based on the meshless adaptive multiscale method were observed to be in excellent agreement with the pure atomistic simulations.
The developed multiscale methods are applied to study the fracture in practical materials like Graphene and Graphene on Silicon surface. The bond stretching and the bond reorientation were observed to be the net mechanisms of the crack growth in Graphene. The influence of time step on the crack propagation was studied using two different time steps. Pure atomistic simulations of fracture in Graphene on Silicon surface are presented. Details of the three dimensional multiscale method to study the fracture in Graphene on Silicon surface are discussed.
This is a work concerned with the increasing processes of social exclusion in cities nowadays. In approaching this phenomenon, the research highlights how people interact with their institutional environments. This is also, perhaps centrally, an investigation into the possibility to engage an individual perspective to understand the transformation in urban experience, which is orienting society to new uses and forms of exclusion. Following the perspective deployed by the so-called “sociology of individuals” in French sociology or “reengagement of agency” in the Anglo-Saxon world; I claim that individuals as well as collectives are gaining increasing power to question and re-organize institutions. This re-organization, in the case of socio-urban institutions, is no guarantee for major levels in integration, cohesion, and equality. Unfortunately, social institutions are becoming hard in its exclusionary capabilities under people intervention during the last four decades.
I believe that urban sociology is a field of struggle between different perspectives competing to “make sense” of social phenomena in cities. The orientation supported in this research is just one on many and it follows the roots of people and their life experiences within cities and how they influence the processes that shape the city. The last formulation is possibly not the clearest, because as we all know, references to “inhabitants” are presented in every variant of urban sociology. Nevertheless, there are not many variants focusing on peoples’ capability to influence institutional environments and by this way affecting the urban condition in which they find themselves. The particular institution selected for this study is the “School”.
This thesis is organized around two parts: part one includes the conceptual framework, methodological approach, and historical contextualization; part two describes three case studies produced to analyse the forms of and the relations between individuals and school institution. Part one starts from a premise: within the context of declining welfare State in the case of industrialized countries, an important part of urban studies focuses on economic and spatial restructuration. Confronted with the same situation, a part of social sciences shifts to the individuals’ agency and social uncertainty. This research is embedded in the last theoretical description presented above, thus, because it tries to observe urban processes from the perspective of the individual and outside of developed economies. In this sense, Latin America represents a fundamental reference because urban conditions are historically marked by weak institutional arrangements to integrating people and large levels of marginality and exclusion among population. In this scenario individuals’ practices around inclusion-exclusion have an essential meaning in everyday life.
Part two offers three study cases in which the relation between individuals and school institutions has been analyzed for the Metropolitan area of Santiago de Chile (MAS). Using different methodological resources an exhaustive account on three levels is presented: i) geo-referencing State intervention in public policies connected with neighborhood and schools to understand the form and extent of socio-urban exclusion in MAS, ii) narrative biographies applied to parents with children attending primary school, in order to reconstruct the familiar process of school selection and describing its impacts on the stabilization of school as an exclusionary device, and iii) autoethnography to describe in detail the temporal dimension involved in stabilizing actions which reinforces social mechanisms of urban integration-exclusion during the last three decades in Chile.
A key argument advanced by this research proposes that: the way in which the idea of integration is enacted by people in their biographical careers imprints changes on the institutional orientation and by this way, contributes to the reorganization urban life. The high level of social exclusion in Santiago de Chile is not accountable without considering transformation in all socio-urban institutions, especially the school. No family considers social integration with people from a low social, economical or cultural background as relevant orientation for school selection. This particularity of the Chilean social reality is not derivable from any big capitalistic or modernization processes impacting our cities.
Within the light of the thesis findings, I conclude that socio-urban institutions logics must be reassessment under the influences of people actions and representations. I also propose a consideration to major complementarities between urban studies and urban-institutions analysis. The school institutions is not just a sectorial field reserved to the researcher in education, on the contrary, it represent a key entrance to address people’s experience in their institutional urban environments. The re-emergence of social and urban movements in 2010, under the “Arab Spring” or the “Chilean Student Movements”, is not only a demonstration in the public space as result of major global trends. These situations are in essence, for this research, individuals gathering together and calling for recognition and autonomy inside institutional environment that tends to reject them. Similar situation was the focus of the Latin American urban sociology research, within the focus on grassroots and urban social movements at the end of the 1960s and beginning of the 1970s.
In both cases, socio-urban institutions, unaware of recognition requirements claimed by inhabitants, are not beyond individual or collective reach. My main concern is to show that socio-urban institutions are constantly re-shaped as a result of individual action, what makes the difference, is the spirit that we all, socially, imprint on the logics of our socio-urban institutions, moving them to inclusion or exclusion.