Refine
Has Fulltext
- yes (115) (remove)
Document Type
- Master's Thesis (115) (remove)
Institute
- Professur Baubetrieb und Bauverfahren (12)
- Professur Grundbau (12)
- Professur Baustatik und Bauteilfestigkeit (8)
- Institut für Europäische Urbanistik (6)
- Professur Stahlbau (6)
- Professur Verkehrsbau (6)
- Institut für Strukturmechanik (ISM) (5)
- Professur Baumechanik (5)
- Professur Bauphysik (5)
- Professur Bodenmechanik (5)
Keywords
- Brückenbau (6)
- Finite-Elemente-Methode (4)
- Temperaturfeld (4)
- BIM (3)
- Computersimulation (3)
- Deich (3)
- IFC (3)
- Simulation (3)
- Analyse (2)
- Bauablauf (2)
Bei einem marktüblichen Calciumsulfat-Fließestrich wurden in der Praxis schädigende Volu-menexpansionen festgestellt. Diese sind ein Resultat aus dem Zusammenwirken des einge-setzten Bindemittel-Compounds und einer kritischen Gesteinskörnung.
Das Ziel dieser Arbeit ist es, ein Calciumsulfat-Bindemittelsystem zu konfektionieren, welches in der Lage ist, die im Mörtel festgestellten Volumenexpansionen zu unterbinden. Es sollen verschiedene Bindemittel- und Additivzusammensetzungen untersucht werden, welche in Verbindung mit der kritischen Gesteinskörnung die Herstellung eines volumenstabilen Fließestrichs ermöglichen. Dazu soll folgende Fragestellung beantwortet werden: Welche Ursachen hat die Volumenzunahme und wie ist diese zu minimieren bzw. unterbinden?
Dabei werden unterschiedliche Bindemittelrezepturen aus α-Halbhydrat, Thermoanhydrit und Naturanhydrit, sowie verschiedene Additivzusammensetzungen hergestellt und untersucht.
Durch Längenänderungsmessungen in der Schwindrinne werden die Einflüsse der Binde-mittel, der Additivzusammensetzungen und der Wasser/Bindemittel-Werte auf das Län-genänderungsverhalten untersucht. Mittels Variation der einzelnen Compound-Bestandteile kann festgestellt werden, dass der Stabilisierer die Längenänderung negativ beeinflusst. Dieser bindet freies Wasser, welches für eine Reaktion zwischen Bindemittel und Gesteins-körnung im plastischen Zustand nicht mehr zur Verfügung steht. Diese Reaktion kann folglich erst im erhärteten Zustand ablaufen und verursacht die schädigende Volumenexpansion.
Abschließend wurde ein Bindemittel-Compound konfektioniert, welcher ohne Zusatz von Stabilisierern in Zusammenhang mit der kritischen Gesteinskörnung volumenstabil ist und keine Schäden auslöst.
Structural optimization has gained considerable attention in the design of structural engineering structures, especially in the preliminary phase.
This study introduces an unconventional approach for structural optimization by utilizing the Energy method with Integral Material Behavior (EIM), based on the Lagrange’s principle of minimum potential energy. An automated two-level optimization search process is proposed, which integrates the EIM, as an alternative method for nonlinear
structural analysis, and the bilevel optimization. The proposed procedure secures the equilibrium through minimizing the potential energy on one level, and on a higher level, a design objective function. For this, the most robust strategy of bilevel optimization, the nested method is used. The function of the potential energy is investigated along with its instabilities for physical nonlinear analysis through principle examples, by which the advantages and limitations using this method are reviewed. Furthermore, optimization algorithms are discussed.
A numerical fully functional code is developed for nonlinear cross section,
element and 2D frame analysis, utilizing different finite elements and is verified
against existing EIM programs. As a proof of concept, the method is applied on selected
examples using this code on cross section and element level. For the former one a
comparison is made with standard procedure, by employing the equilibrium equations
within the constrains. The validation of the element level was proven by a theoretical
solution of an arch bridge and finally, a truss bridge is optimized. Most of the
principle examples are chosen to be adequate for the everyday engineering practice, to
demonstrate the effectiveness of the proposed method.
This study implies that with further development, this method could become just as
competitive as the conventional structural optimization techniques using the Finite
Element Method.
The need for finding persuasive arguments can arise in a variety of domains such as politics, finance, marketing or personal entertainment. In these domains, there is a demand to make decisions by oneself or to convince somebody about a specific topic. To obtain a conclusion, one has to search thoroughly different sources in literature and on the web to compare various arguments. Voice interfaces, in form of smartphone applications or smart speakers, present the user with natural conversations in a comfortable way to make search requests in contrast to a traditional search interface with keyboard and display. Benefits and obstacles of such a new interface are analyzed by conducting two studies. The first one consists of a survey for analyzing the target group with questions about situations, motivations, and possible demanding features. The latter one is a wizard-of-oz experiment to investigate possible queries on how a user formulates requests to such a novel system. The results indicate that a search interface with conversational abilities can build a helpful assistant, but to satisfy the demands of a broader audience some additional information retrieval and visualization features need to be implemented.
The aim of my research is to observe the variance of energy efficiency of a typical multi-story office building under the exposure of different climatic conditions. Energy efficiency requirements in building codes or energy standards are among the most important single measures for buildings’ energy efficiency. Therefore, this study can be set up for a better understanding of how energy efficiency of a building changes under the effect of adverse to moderate climatic conditions which possess a mentionable effect on the operation of a building.
This thesis is structured in three balanced and conceptual steps. Following the aim of the project, the virtual building model is to be analyzed under the effect of seven distinct climatic conditions namely work environment of New Delhi, Mumbai, Berlin, Lisbon, Copenhagen, Dubai and Montreal. Firstly, the task is to do a complete literature research based on the scope of similar researches and studying the problems in detail along with the theoritical background all the concepts which are implemented to get the numerical results. This chapter also comprises a detailed study of the climatic conditions of the above-mentioned cities. Different climatic traits like temperature variations, count of heating and cooling degree days, relative humidity, temperature range and comfort zonal charts for the specified cities are studied in detail. This study helps to understand the effect of these adverse to moderate climates on the operation of the building. On the second step, the virtual building model is prepared on a software platform named Revit Structures. This virtual building model is not necessarily a complete building, but it has the relevant functionalities of a real building. We perform the energy analysis and the heating and cooling analysis on this virtual building model to study the operational outcome of the building under different climatic conditions in detail. By the end of these above two tasks, two scenarios are observed. On one hand, we have a literature research and on the other hand we have the numerical results. Therefore, finally we present a comparative scenario based on the energy efficient performances of the building under such variant climatic conditions. This is followed by the prediction of thermal comfort level inside the building and it based on Fanger’s PMV Model. Understanding the literature and the numerical values in detail helps us to predict the index thermal comfort level inside the building.
The conclusion of this master thesis focuses mainly on the scopes of improvement of energy efficiency requirements in energy codes if any, differentiated according to specific locations. The initial aim of my hypothesis which is to study the impacts of climatic variations on the energy efficient performances of a building is fulfilled but as such topics have very deep and broad roots, the scope of further improvements is always predominant.
INTRODUCTION
The research field of sound landscape and public life, initially drew my attention during the master class of ‘Media of the Urban’, originally ‘Medien des Urbanen, which was given by Prof. Dr. Gabriele Schabacher in the 2015 summer semester. For the relevant class, I conducted an conceptual case study in Istanbul, Beyoglu District, with the intention of analysing the perception of the space by urban sound. During the summer 2015 I recorded various sounds of different spatial settings and developed the analysis by comparing the situations. By that time, I realized the inherent property of the sound as a medium for our perception in urban context.
In the 2015-2016 winter semester, I participated in the master class of the architectural project, named ‘Build Allegory’, which was given by Prof. Dipl.-Ing. Heike Büttner. The project was situated in Berlin Westkreuz, AVUS north curve, on the highway and was originally a race track from 1921. In this context, the aim of my project was to answer various questions, main of which was, how does the architectural form shape the sound of the place? And, how does the sound of the place shape the architectural from? Since the place is still serving mainly to the vehicles, although the function has differed, the sound objects and the context have remained. Through the existence of contextual references, I started with creating a computational tool for analysing the acoustic characteristics of this urban setting, which is fundamentally providing results as the sound cloud, driven from the sound ray tracing method. Regarding to this soundscape analysis method, which I developed, this computational tool assisted me to find an optimum reciprocal relation between architecture and sound.
Since I have been working on soundscape in the context of architecture, urban situations, public life and public space, I was determined to produce a comprehensive research in this field and propound the hypothesis; the existence of the reciprocity between the social behaviours in public space and the sound landscape. In which extent does this reciprocity exist? What are the effects of the public life on the sonic configurations of the space and the other way around?
Aerodynamic Analysis of Slender Vertical Structure and Response Control with Tuned Mass Damper
(2015)
Analysis of vortex induced vibration has gained more interest in practical held of civil engineering. The phenomenon often occurs in long and slender vertical structure like high rise building, tower, chimney or bridge pylon, which resulting in unfavorable responses and might lead to the collapse of the structures. The phenomenon appears when frequency of vortex shedding produced in the wake area of body meet the natural frequency of the structure. Even though this phenomenon does not necessarily generate a divergent amplitude response, the structure still may fail due to fatigue damage.
To reduce the effect of vortex induced vibration, engineers widely use passive vibration response control system. In this case, the thesis studies the effect of tuned mass damper. The objective of this thesis is to simulate the effect of tuned mass damper in reducing unfavorable responses due to vortex induced vibration and initiated by numerical model validation with respect to wind tunnel test report. The reference structure that being used inside the thesis is Stonecutter Bridge, Hongkong.
A numerical solver for computational uid dynamics named VX ow which developed by Morgenthal [6] is utilized for wind and structure simulation. The comparison between numerical model and wind tunnel result shows 10% maximum tip displacement diference in the model of full erection freestanding tower. The tuned mass damper (TMD) model itself built separately in finite element software SOFiSTiK, and the efective damping obtained from this model then applied inside input modal data of VX ow simulation. A single TMD with mass ratio of TMD 0.5% to the mass of first bending frequency, the maximum tip displacement is measured to be average 67% reduced.
Considering construction limitation and robustness of TMD, the effects of multiple TMD inside a structure are also studied. An uncoupled procedure of applying aeroelastic loads obtained from VX
ow inside finite element software SOFiSTiK is also done to observe the optimum distribution and optimum mass ratio of multiple tuned mass damper. The rest of the properties of TMD are calculated with Den Hartog's formula. The results are as follows: peak displacement in the case of multiple TMD that distributed with polynomial spacing achieve 7.8% more reduction performance than
the one that distributed with equal spacing. Optimum mass of tuned mass damper achieved with ratio 1.25% mass of first bending frequency corresponds to across wind direction.
The polymeric clay nanocomposites are a new class of materials of which recently have become the centre of attention due to their superior mechanical and physical properties. Several studies have been performed on the mechanical characterisation of these nanocomposites; however most of those studies have neglected the effect of the interfacial region between the clays and the matrix despite of its significant influence on the mechanical performance of the nanocomposites.
There are different analytical methods to calculate the overall elastic material properties of the composites. In this study we use the Mori-Tanaka method to determine the overall stiffness of the composites for simple inclusion geometries of cylinder and sphere. Furthermore, the effect of interphase layer on the overall properties of composites is calculated. Here, we intend to get ounds for the effective mechanical properties to compare with the analytical results. Hence, we use linear displacement boundary conditions (LD) and uniform traction boundary conditions (UT) accordingly. Finally, the analytical results are compared with numerical results and they are in a good agreement.
The next focus of this dissertation is a computational approach with a hierarchical multiscale method on the mesoscopic level. In other words, in this study we use the stochastic analysis and computational homogenization method to analyse the effect of thickness and stiffness of the interfacial region on the overall elastic properties of the clay/epoxy nanocomposites. The results show that the increase in interphase thickness, reduces the stiffness of the clay/epoxy naocomposites and this decrease becomes significant in higher clay contents. The results of the sensitivity analysis prove that the stiffness of the interphase layer has more significant effect on the final stiffness of nanocomposites. We also validate the results with the available experimental results from the literature which show good agreement.
Im Rahmen der Forschung an Bauteil- und Fügestellendämpfung wurden die Schwingungen der Bauteile bisher mit 1D-Laser-Vibrometern gemessen. Nun steht ein 3D-Laser-Scanner zur Verfügung. Diese Arbeit beschäftigt sich mit der Frage, ob mit dem 3D-Laser-Scanner bessere und weitere relevante Daten bei der Schwingungsmessung gewonnen werden können.
Baulogistische Vorgänge sind in einer modern angelegten Baustelle der Schlüssel zu einer wirtschaftlichen Abwicklung. Dieses gilt nicht nur für den Rohbau, bei dem die sehr enge Verzahnung zwischen den Fertigungs- und Logistikprozessen auf der Baustelle zu beobachten ist, sondern noch mehr für die Ausbauphase, bei der vermeintlich unabhängig voneinander agierende Einzelunternehmen des Ausbaus auf engem Raum miteinander um die jeweils besten Liefer- und Montagebedingungen konkurrieren.
Ausgehend von einer aktuellen Großbaustelle in Jena werden verschiedene Varianten einer leistungsfähigen Baulogistik entwickelt und deren Implementierung auf der Baustelle vorbereitet werden.
The focus of the thesis is to process measurements acquired from a continuous
monitoring system at a railway bridge. Temperature, strain and ambient vibration
records are analysed and two main directions of investigation are pursued.
The first and the most demanding task is to develop processing routines able to extract modal parameters from ambient vibration measurements. For this purpose, reliable experimental models are achieved on the basis of a stochastic system identification(SSI) procedure. A fully automated algorithm based on a three-stage clustering is implemented to perform a modal parameter estimation for every single measurement. After selecting a baseline of modal parameters, the evolution of eigenfrequencies is
studied and correlated to environmental and operational factors.
The second aspect deals with the structural response to passing trains. Corresponding
triggered records of strain and temperature are processed and their assessment is
accomplished using the average strains induced by each train as the reference parameter.
Three influences due to speed, temperature and loads are distinguished and treated individually. An attempt to estimate the maximum response variation due to each factor is also carried out.
Für das städtische Leben hat die Existenz sich verändernder Personenströme eine grundlegende Bedeutung.
Ein Werkzeug, das solche kollektiven Bewegungsmuster sichtbar machen kann, wäre dabei ein bedeutendes Hilfsmittel für die Stadtplanung. Im Mittelpunkt der vorliegenden Arbeit steht die Auseinandersetzung mit der Space Syntax Methode.
Diese untersucht den Zusammenhang räumlicher Strukturen mit deren Nutzung. Eine wichtige Erkenntnis ist, dass das kollektive menschliche Verhalten im öffentlichen Raum berechenbar ist. Die Tatsache, dass Passanten bestimmte Wege bevorzugen und andere meiden, führt Space Syntax dabei auf stadträumliche Ursachen zurück. Der Begriff des Natural Movement beschreibt den Anteil dieser räumlich bedingten Nutzung.
Die vorliegende Arbeit gliedert sich in einen theoretischen und einen praktischen Teil. Zunächst werden die für das Verständnis der Space Syntax Methode wichtigen Begriffe und Maßgrößen beschrieben. Der methodische Teil wird ergänzt durch eine Gegenüberstellung nutzer-basierter wissenschaftlicher Ansätze mit der räumlich-orientierten Space Syntax Methode.
Im zweiten Teil der Arbeit wird die praktische Anwendung der Space Syntax Methode am Beispiel des Leipziger City-Tunnels vorgenommen. Das Fallbeispiel ist prädestiniert für die Untersuchung, wie die regionale Vernetzung des Schienenverkehrs aktuell betrieben wird. Von Interesse ist dabei sowohl die Konzeption des zukünftigen Liniennetzes als auch dessen stadträumliche Einbindung.
Forscher prognostizieren in den kommenden Jahren eine Klimaerwärmung bis zu 6 ° C. Aus diesem Grund wurde das EU – Forschungsprojekt „ Climate for Culture“ ins Leben gerufen, um Auswirkungen dieses Klimawandels auf denkmalgeschützte, kulturhistorische Gebäude zu untersuchen. Ziel ist es, entsprechende Schutzmaßnahmen in konservatorischer Hinsicht zu erarbeiten.
Aufgrund des Zusammenhanges zwischen Temperatur und Luftfeuchte führt diese Klimaerwärmung auch zu einer Änderung des Feuchtehaushaltes im Außenbereich und, bedingt durch einen immer vorhandenen Luftwechsel, schließlich auch im Innenbereich von Gebäuden.
Die Fähigkeit eines Gebäudes, durch seine Beschaffenheit auf Feuchteeinflüsse zu reagieren, wird maßgeblich bestimmt durch seine Möglichkeit, in der Gebäudehülle und der vorhandenen Einrichtung anfallende Feuchte zwischenzuspeichern und diese zeitversetzt wieder an die Umgebung abzugeben. Diese Fähigkeit sorptiver Flächen zur Feuchtepufferung konnte bislang nur mit erheblichem Aufwand ermittelt werden.
In der vorliegenden Arbeit wird versucht, durch einfachere Methoden mittels hygrothermischer Simulation einen „Zweizahlwert“ zu erhalten, mit dem sich diese Raumkompetenz schnell und nachvollziehbar darstellen lässt.
Für anwendungsbezogene Lösungsansätze im Bereich der Siedlungswasserwirtschaft im urbanen Raum ist es wichtig, die Inhalte komplexer ineinander greifender Systeme zu begreifen. Ein Simulationsspiel kann hilfreich sein, um den Nutzer mit neuen Technologien und Möglichkeiten der Kombination vertraut zu machen. Aufgrund hoher Anforderungen an Komplexität und Detailliertheit der Modelle ist die Entwicklung eines solchen Spiels teuer und aufwändig. Diese Arbeit untersucht, inwieweit sich das kommerziell zu Unterhaltungszwecken entwickelte Spiel SimCity 5 (Version 2013) nutzen lässt bzw. wie es konfiguriert werden muss. Im Speziellen wird dies am Beispiel des naturnahen Regenwassermanagements im urbanen Raum erläutert.
Die Analyse von SimCity 5 zeigt, dass sich das Spiel durchaus als Werkzeug zur Entscheidungsunterstützung eignet. Die Teilsysteme der Siedlungswasserwirtschaft sind jedoch zu stark vereinfacht, sodass Verbesserungsbedarf besteht.
Um Szenarien des naturnahen Regenwassermanagements in das Spiel zu integrieren, wurde im Rahmen der Arbeit das Modell SimRegen entwickelt. Da derzeit keine Schnittstelle zur agentenbasierten Simulationsengine GlassBox freigegeben ist, wurden Teilaspekte des Modells mit Hilfe des agentenbasierten Simulationswerkzeugs NetLogo (Version 5.0.4) implementiert.
Die Kurzfassung ist auf deutsch und die ganze Arbeit + Anhänge auf französisch.
AUSGANGSPUNKT
Die Spannung zwischen Sanierung und sozialem Wandel Nach dem Wegzug der mittleren Schichten aus den Innenstädten gibt es seit mehr als 50 Jahren ein öffentliches Bestreben, europäische Städte zu sanieren. Damit soll die Attraktivität dieser Stadtteile gesteigert sowie Investitionen gefördert werden. In mehreren wissenschaftlichen Arbeiten und empirischen Untersuchungen über die Ergebnisse dieser Sanierungspolitik haben Forscher vor den negativen Effekten für die Anwohner gewarnt und den Begriff der „Gentrifizierung“ eingeführt. Die Aufwertung der Innenstädte sei mit einem sozialen Umstrukturierungsprozess durch den wachsenden Druck am Wohnungsmarkt und eine kontinuierliche Mietpreiserhöhung verbunden.
FRAGESTELLUNG
Die Sanierungsprojekte, die in den 80er-Jahren im Rahmen der I.B.A. entwickelt wurden, sind international als „good practice“ bezeichnet worden. Die zwölf Leitsätze der „behutsamen Stadterneuerung“ sind das Vorzeigekind der deutschen Sanierungspraxis. Diese Erfahrungen wurden nach dem Fall der Mauer auf die Situation im Prenzlauer Berg übertragen. Die vorliegende Arbeit (in französischer Sprache) ist der Frage nachgegangen, inwiefern die behutsame Stadterneuerung in Berlin Prenzlauer Berg als Modell städtebaulicher Politik im Altbaugebiet dienen kann? „Modell“ ist dabei nicht als Reproduktionsmodell, sondern im Sinne von „Vorbild“ gemeint. ...
Thin-walled cylindrical composite shell structures are often applied in aerospace for lighter and cheaper launcher transport system. These structures exhibit sensitivity to geometrical imperfection and are prone to buckling under axial compression. Today the design is based on NASA guidelines from the 1960’s [1] using a conservative lower bound curve embodying many experimental results of that time. It is well known that the advantages and different characteristics of composites as well as the evolution of manufacturing standards are not considered apporopriately in this outdated approach. The DESICOS project was initiated to provide new design guidelines regarding all the advantages of composites and allow further weight reduction of space structures by guaranteeing a more precise and robust design.
Therefore it is necessary among other things to understand how a cutout with different dimensions affects the buckling load of a thin-walled cylindrical shell structure in combination with initial geometric imperfections. This work is intended to identify a ratio between the cutout characteristic dimension (in this case the cutout diameter) and the structure characteristic dimension (in this case the cylinder radius) that can be used to tell if the buckling structure is dominated by initial imperfections or is dominated by the cutout.
Der inhaltlichen Qualitätssicherung von Bauwerksinformationsmodellen (BIM) kommt im Zuge einer stetig wachsenden Nutzung der verwendeten BIM für unterschiedliche Anwen-dungsfälle eine große Bedeutung zu. Diese ist für jede am Datenaustausch beteiligte Software dem Projektziel entsprechend durchzuführen. Mit den Industry Foundation Classes (IFC) steht ein etabliertes Format für die Beschreibung und den Austausch eines solchen Modells zur Verfügung. Für den Prozess der Qualitätssicherung wird eine serverbasierte Testumgebung Bestandteil des neuen Zertifizierungsverfahrens der IFC sein. Zu diesem Zweck wurde durch das „iabi - Institut für angewandte Bauinformatik” in Zusammenarbeit mit „buildingSMART e.V.“ (http://www.buildingsmart.de) ein Global Testing Documentation Server (GTDS) implementiert. Der GTDS ist eine, auf einer Datenbank basierte, Web-Applikation, die folgende Intentionen verfolgt:
• Bereitstellung eines Werkzeugs für das qualitative Testen IFC-basierter Modelle
• Unterstützung der Kommunikation zwischen IFC Entwicklern und Anwendern
• Dokumentation der Qualität von IFC-basierten Softwareanwendungen
• Bereitstellung einer Plattform für die Zertifizierung von IFC Anwendungen
Gegenstand der Arbeit ist die Planung und exemplarische Umsetzung eines Werkzeugs zur interaktiven Visualisierung von Qualitätsdefiziten, die vom GTDS im Modell erkannt wurden. Die exemplarische Umsetzung soll dabei aufbauend auf den OPEN IFC TOOLS (http://www.openifctools.org) erfolgen.
Helsinki Central
(2012)
Als zentraler Ort und Eingangstor in die finnische Hauptstadt bietet der Bereich um den Bahnhof, in dem sich das Baufeld befindet zu wenig räumliche Qualitäten und bildet gleichzeitig eine Barriere zwischen dem historischen Stadtkern und dem politischen und kulturellem Zentrum der Stadt.
Der historische Bahnhof aus der Epoche des Jugendstils ist momentan eingeschlossen von einer hochfrequentierten Straße im Süden und den flankierenden Stationen des Busbahnhofs an der Ost- und Westseite.
Die fußläufigen Verbindungen in die Altstadt sind gestört und das Regierungsviertel mit
dem Reichstagsgebäude werden links liegen gelassen. Eine Orientierung als Neuankömmling ist schwer möglich.
Darüber hinaus kommt etwa die Hälfte der Züge, vor allem die Regionalzüge nicht in der Bahnhofshalle des Kopfbahnhofes an, weil die Begrenzung durch die
Seitenflügel nur eine Erweiterung des Bahnhofs nach Norden hin zuließ.
Entstanden ist ein Entwurf der versucht, dem gesamten Bereich um den Bahnhof ein neues Gesicht zu geben und eine Verbesserung auf unterschiedlichen Ebenen zu erreichen. Er bündelt zum einen die verschiedenen Verkehrsströme und stellt eine bisher unterbrochene Querverbindung zwischen den benachbarten Stadtvierteln entlang des Bahnhofsareals her. Zum anderen trägt er dem Erfordernis nach einem städtebaulichen Gegenüber für das
Regierungsgebäude Rechnung, welches damit in den Verbund der kulturellen Einrichtungen auf dem Töölönlahti Gelände aufgenommen wird. Darüber hinaus belebt er eine Besonderheit von Helsinki. Zu Beginn des 20. Jahrhunderts bestand die Notwendigkeit den Hafen an das Schienennetz anzubinden. Da der Stadtkern bereits sehr dicht bebaut war, wurde ein Eisenbahnring entlang der Küste, einmal um das Stadtzentrum herum gebaut. Seitdem die Verbindung stillgelegt wurde liegt dieser Ring brach, was nun die große Chance bietet, eine kreuzungsfreien Rad- und Fußweg zu etablieren, der durch den Entwurf eines Mobilityhubs geschlossen würde.
In der vorliegenden Broschüre werden die städtebaulichen Rahmenbedingungen, die Analyse der gegenwärtigen Situation und der eigentliche Entwurfsprozess, der zu dieser Lösung führte dokumentiert.
Die Architekten, Künstler und Designer des Bauhauses prägten mit neuem gestalterischen Geist eine unverwechselbare Bauhaus-Handschrift. Ausgehend von Weimar schrieben sie sich damit in die Weltkulturgeschichte ein. Nachdem das Bauhaus 1933 dem Nationalsozialismus in Deutschland zum Opfer gefallen war, lebten Idee und Praxis des Bauhauses mit den emigrierenden Lehrern und Schülern im Ausland weiter. Weltweit existieren noch heute Gebäude, Produkte und Kunstwerke, die durch das Bauhaus entstanden sind, von ihm inspiriert wurden oder darauf Bezug nehmen. Mit dem Projekt ImpulsBauhaus versuchen Jens Weber und Andreas Wolter, die weltweite Verbreitung und Einflussnahme des Bauhauses anhand der Beziehungen, Bewegungen und Werke seiner Vertreter bis in die Gegenwart nachvollziehbar zu machen. Das Projekt besteht aus zwei Teilen. Die ImpulsBauhaus-Forschungsplattform ist eine Datenbank, in der Informationen über Bauhaus-Vertreter gesammelt und mithilfe von Analysetools und Visualisierungsinstrumenten ausgewertet werden können. Der zweite Teil besteht aus einer räumlichen Inszenierung der Informationsbestände – der ImpulsBauhaus-Ausstellung. Ausgangspunkt des Projekts ImpulsBauhaus war neben dem kunstwissenschaftlichen Interesse die Frage, wie mit heutigen digitalen Mitteln große Informationsmengen verwaltet, analysiert und visualisiert werden können.
Weiterführende Informationen zum Projekt finden sich auf der Website http://impuls-bauhaus.de, wo auch interessierte Wissenschaftler und Autoren Zugang zur ImpulsBauhaus-Forschungsplattform erhalten.
The initial shear modulus, Gmax, of soil is an important parameter for a variety of geotechnical design applications. This modulus is typically associated with shear strain levels about 5*10^-3% and below. The critical role of soil stiffness at small-strains in the design and analysis of geotechnical infrastructure is now widely accepted.
Gmax is a key parameter in small-strain dynamic analyses such as those to predict soil behavior or soil-structure interaction during earthquake, explosions, machine or traffic vibration where it is necessary to know how the shear modulus degrades from its small-strain value as the level of shear strain increases. Gmax can be equally important for small-strain cyclic situations such as those caused by wind or wave loading and for small-strain static situations as well. Gmax may also be used as an indirect indication of various soil parameters, as it, in many cases, correlates well to other soil properties such as density and sample disturbance. In recent years, a technique using bender elements was developed to investigate the small-strain shear modulus Gmax.
The objective of this thesis is to study the initial shear stiffness for various sands with different void ratios, densities, grain size distribution under dry and saturated conditions, then to compare empirical equations to predict Gmax and results from other testing devices with results of bender elements from this study.