Refine
Document Type
- Conference Proceeding (50) (remove)
Institute
Keywords
- Modellierung (50) (remove)
We present a model derived to describe tunnel fires. The model originates in a compressible description of the air in the tunnel. It takes into account the strong buoyancy forces and at the same time the small Mach-number of the airflow. We comment on the derivation, on analytical results and on numerical simulations of the model. The model has been validated using data from real tunnel fire experiments. It shows good agreement with the real situation.
In den zurückliegenden Jahren wurden an der Professur Massivbau I umfangreiche Untersuchungen zur Modellbildung und rechnerischen Erfassung des Tragverhaltens von Tragwerken und Tragwerkselementen aus Stahlbeton und Spannbeton unter Berücksichtigung von Rißbildungen und Plastizierungen durchgeführt. Diesen Untersuchungen liegt als einheitliches methodisches Konzept der mathematischen Problembeschreibung und Problemlösung die mathematische Optimierung zugrunde. Bereits anläßlich des IKM 1994 [1] hatte der Verfasser Gelegenheit, zusammenfassend über Ergebnisse bei der Anwendung der mathematischen Optimierung im Bereich der nichtlinearen Tragwerksanalyse zu berichten. Der vorliegende Beitrag, soll einen Überblick über seitdem untersuchte Problemkreise und dabei gewonnene Ergebnisse und Erfahrungen vermitteln. Bei der Anwendung der linearen und quadratischen Optimierung sind wegen der geforderten Linearität der Nebenbedingungen Vereinfachungen bei der Modellbildung des stahlbetonspezifischen Tragverhaltens unumgänglich. Besonders betroffen sind die Ansätze zur Beschreibungen des Materialverhaltens. Durch den Einsatz allgemeiner nichtlinearer mathematischer Optimierungsmethoden lässt sich eine methodisch bedingte Linearisierung des Berechnungsmodells umgehen....
Am Fraunhofer ISE wurde in den letzten Jahren die Simulationsumgebung ColSim entwickelt, die sich speziell zur Untersuchung von Regelungssystemen in Gebäudeenergieversorgungssystemen eignet. Zielsetzung des Designs ist die Umsetzung des simulationsbasierten Regelungsentwurfs, der einen unmittelbaren Einsatz der Regelungsmodule auf sog. Enbedded Systems gestattet. Das Simulationswerkzeug zeichnet sich durch die modulare offene Struktur aus, die eine flexible Erweiterung ermöglicht (vgl. TRNSYS [1]). Die Implementierung erfolgte im genormten ANSI-C Code, der einen plattform- unabhänigen Einsatz gewährleistet. Entwicklungsplattform stellt derzeit ein Linux Cluster dar, als Zielplattform wurden bisher sowohl eingebettete Industrie-PCs wie auch klassische Micro- controller Boards verwendet. Die Entwurfsmethode wird anhand einer Systemregelung für eine solarthermische Anlage mit 120m2 Kollektorfläche (SolarThermie2000 Anlage) demonstriert, bei der ein vernetztes Regelungssystem mit Internet-Integration zum Einsatz kommt. Das Regelungssystem verfügt seinerseits über ein Betriebssystem (schlankes embedded linux system), das die Kommunikation nach aussen gestattet. Das Regelungssystem vefügt somit über Klima- bzw Strahlungsdaten, die für den Regelungsprozess von Bedeutung sind. Die externen Informationen können einerseits zur >Einsparung< von Sensorik genutzt werden, andererseits gestatten sie den Einsatz von prädiktiver Regelungsmethodik, um den fossilen (Nachheiz-) Energieeinsatz zu minimieren. Mit Hilfe von simulationstechnischen Systemstudien kann ein adaptives Verhalten des Regelungssystems erprobt werden, das eine selbstständige Strecken- identifikation realieren kann. Beispielsweise soll beim näher beschriebenen solarthermischen System die Totzeit bestimmt werden, die sich infolge der Verrohrung zwischen Speicher und Entladegruppe ergibt. Der Betrieb der Entlade- pumpe wird einerseits in Abhängigkeit der Verfügbarkeit des Pufferwassers erfolgen, andererseits in Abhängigkeit des erwarteten Zapfvolumens durch den Verbraucher. Die vernetzten Regelungssysteme, die auf Basis der Simulationsmodelle ent- wickelt werden, sollen künftig die gesamte Energieflußanalyse des Gebäudes realisieren, wobei eine transparente Darstellung des Systemverhaltens auf Basis einer Internet Visualisierung erfolgt. Der Betreiber und Nutzer wird unmittel- bar durch die Online Dienste (SMS,Email,Fax) über das (fehlerhafte) Anlagen- verhalten informiert. Gerade die sensitiven regenerativen Systeme neigen durch ihre Komplexität zu Störungen, die oftmals nicht erkannt werden, weil die konventionellen Teilsysteme (z.B. Ergasbrenner) den Ausfall in der Regel >kompensieren<.
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag gezeigt, wie das Handaufmaß unter Einsatz modernen taktiler Erfassungsmethoden eine ganz neue Bedeutung für die Datenerfassung gewinnen kann. Das Potenzial der verschiedenen Verfahren zur Koordinatenbestimmung mit taktilen Werkzeugen wird evaluiert. Daraus wird eine Strategie entwickelt, die für die unterschiedlichen Notwendigkeiten im Planungsfortschritt den optimierten Einsatz der taktilen Erfassung in Kombination mit klassischen Erfassungsmethoden aufzeigt. Die Realisierbarkeit eines derartigen Konzeptes wird durch Fallstudien und mögliche Ablaufszenarien für einzelne Verfahren nachgewiesen. Durch die Integration taktiler Messverfahren in die Bestandserfassung kann erreicht werden, dass - relevante (Geometrie-) Informationen in ein umfassendes Bauwerksmodell integriert werden können, - die Bauaufnahme wieder im direkten Kontakt zum Bauaufnahmeobjekt erfolgen kann und - die Verfahren so einfach und leicht von allen Beteiligten eingesetzt werden können, um die Bauaufnahme und die Planung wieder miteinander zu verzahnen.
It has been shown that symmetries of moment functions of stochastic processes play an important role in identification of systems. They provide the group-theoretic method of choice of the model structure and model parameters. In the first stage the group-theoretic analysis of some fundamental concepts of stochastic dynamics: stochastic processes and functional series of Volterra-Wiener type has been undertaken. The analysis of group representations of the moment functions of order m for stochastic processes is the basic, original concept of the work. The following groups: symmetric Sm, special affine SAff(m), general linear GL(n, R), GL(n,C) and their subgroups play the main role in the models. In the second stage the informational entropy has been introduced as a measure of the randomness in the identified models. The group-theoretic approach underlines the unity of the nonlinear system identification and leads to useful engineering results in the range of the second-order (stochastic) theory.
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. Als ein Teilaspekt wird in diesem Beitrag die Vision eines mitwachsenden Geometriemodells für das computergestützte Bauaufmaß gezeigt, welches den Aufnehmenden von der Erstbegehung an begleitet. Die bei jeder Phase der Bauaufnahme gewonnenen Geometrieinformationen sollen in den anschließenden Phasen wiederverwendet, konkretisiert bzw. korrigiert werden. Aufmaßtechniken und Geometriemodell sind dabei eng gekoppelt. Verschiedene Sichten auf ein gemeinsames Geometriemodell haben zum Ziel, den Nutzer die Vorteile planarer Abbildungen nutzen zu lassen, ohne die dreidimensionale Übersicht zu verlieren oder entsprechende räumliche Manipulationen zu missen. Das Geometriemodell ist dabei in ein dynamisches Bauwerksmodell eingebettet. Der folgende Beitrag bezieht sich auf die Bauaufnahme mit folgenden Vorgaben: - die Bauaufnahme dient der Vorbereitung der Bauplanung im Bestand - es wird nur eine Genauigkeitsstufe (im Bereich von +/- 10 cm) unterstützt - die Geometrieabbildung des aufzunehmenden Bauwerkes beruht ausschließlich auf ebenen Oberflächen
The subject of this talk is the problem of surface design based upon a mesh that may contain both triangular and quadrangular domains. We investigate the cases when such a combined mesh occurs more preferable for bivariate data interpolation than a pure triangulation. First we describe a modification of the well-known flipping algorithm that constructs a locally optimal combined mesh with a predefined quality criterion. Then we introduce two quality measures for triangular and quadrangular domains and present the results of a computational experiment that compares integral interpolation errors and errors in gradients caused by the piecewise surface models produced by the flipping algorithm with the introduced quality measures. The experiment shows that triangular meshes with the Delaunay quality measure provide better interpolation accuracy only if the interpolated function is strictly convex, as well as a saddle-shaped function is better interpolated by bilinear patches within a combined mesh. For a randomly shaped function combined meshes demonstrate smaller error values and better stability in compare with pure triangulations. At the end we consider other resources for mesh improvement, such as excluding >bad< points from the input set for the mesh generating procedure. Because the function values at these points should not be lost, some linear or bilinear patches are replaced by nonlinear patches that pass through the excluded points.
Poland is not situated in any seismic region of the earth, however there are still areas were underground mining is being conducted. In these areas, so-called 'paraseismic tremors', are very frequent phenomena. In the situation when a building examination is realized in order to define its safety, it is necessary to make a complete analysis, in which an influence of tremors should be included. To decide if a building is able to carry out any dynamic loads or not, it is necessary to compute its dynamic characteristics, i.e. natural frequencies. It is not possible using any standard techniques. After diagnosis a building in situ by an expert, computer techniques together with specialized software for dynamic, static, and strength analyses become a suitable tool. In this paper a special attention was paid to a typical twelve-store WGP (Wroclaw Great Plate) prefabricated building, concerning special type of joints. During dynamic actions these joints have a decisive influence on building's behavior. Paraseismic tremors are especially dangerous for these buildings and can be the reason of pre-failure states. It can be difficult and very expensive to prepare laboratory investigations of the part of a building or of a separate joint; therefore the computer modeling suitable to investigate behavior of such elements and whole buildings under different kinds of loads was used.
Die digitale Unterstützung der Planungsprozesse ist ein aktueller Forschungs- und Arbeitsschwerpunkt der Professur Informatik in der Architektur (InfAR) und der Juniorprofessur Architekturinformatik der Fakultät Architektur an der Bauhaus-Universität Weimar. Verankert in dem DFG Sonderforschungsbereich 524 >Werkzeuge und Konstruktionen für die Revitalisierung von Bauwerken< entstehen Konzepte und Prototypen für eine fachlich orientierte Planungsunterstützung. In dem Beitrag wird ein Konzept und prototypische Realisierung für die durchgängige Unterstützung des gesamten Bauaufnahmeprozesses für Altbausubstanz vorgestellt und diskutiert. Der Fokus liegt auf der frühe Phase in der Bauaufnahme als ein Baustein in einer gesamtheitlichen IT-gestützen Planungsumgebung eingegangen. Durch gezielte Aufnahme planungsrelevanter Parameter und Auswertung hinsichtlich Wirtschaftlichkeit und Wiederverwendbarkeit bzw. der Variantenüberprüfung von Nutungskonzepten, werden gerade in dieser Phase wesentliche Entscheidungen für eine kostengünstige Planung getroffen werden. In der Veröffentlichung wird der Fokus auf folgende Punkte gesetzt: - Strukturierung und Aufnahme der Informationen während der Erstbegehung - Skizzenhafte Abbildung als Basis für die Formulierung erster Entwurfsintensionen/ Variantenuntersuchungen - Navigations- und Informationsumgebung - gezielte Auswertungsmöglichkeiten (bspw. Wirtschaftlichkeitsberechnung, Wiederverwendung von Bauteilen, Kalkulation von Abrissmengen)
Bei der Gründung von schweren Bauwerken (z.B. Hochhäusern auf Gründungsplatten und pfählen) wird der Lastabtrag in den Baugrund durch eine starke Interaktion zwischen Bauwerk und Baugrund bestimmt. Der Baugrund kann phänomenologisch als Mehrphasenkontinuum beschrieben werden, bei dem die Phasen Feststoff, Flüssigkeit und Gas in mechanische Wechselwirkung treten. Die Wechselwirkung zwischen der Deformation des Feststoffes und der Strömung des Porenwassers spielt unter der Lasteinwirkung des Bauwerks und unter dynamischer Erregung eine zentrale Rolle. Bei komplexen Gründungsverhältnissen können die Deformations- und Spannungszustände realitätsnah nur durch dreidimensionale Modelle erfasst werden. Je nach Baufortschritt stellen sich die Probleme dabei unterschiedlich dar. Der vorliegende Beitrag beschäftigt sich mit der für die mit der Simulation mit der Methode der finiten Elemente notwendigen Modellierung und der rechnergestützten Netzgenerierung für die Baugrund-Tragwerk-Strukturen. Bei komplexen dreidimensionalen Gründungskonstruktionen ist eine solche rechnergestützte Diskretisierung mit finiten Elementen zweckmäßig, die das geotechnische System und dessen Randbedingungen und Lasten umfassend beschreiben und verwalten kann. Dafür werden geeignete Software-Werkzeuge vorgestellt, mit denen sich dreidimensionale, zeitabhängige Systeme modellieren und diskretisieren lassen. Die Kontaktproblematik zwischen Baugrund und Tragwerk und die Besonderheiten des Mehrphasenkontinuums stellen besondere Ansprüche an die Diskretisierung. Zudem werden Methoden vorgestellt, die das akkumulierte Gründungsmodell, das sich über den Bauablauf ergibt, verwalten und die verschiedenen Bauzustände in einem dynamischen Modell bereitstellen.
In this paper a meshless component is presented, which internally uses the common meshless interpolation technique >Moving Least Squares<. In contrast to usual meshless integration schemes like the cell quadrature and the nodal integration in this study integration zones with triangular geometry spanned by three nodes are used for 2D analysis. The boundary of the structure is defined by boundary nodes, which are similar to finite element nodes. By using the neighborhood relations of the integration zones an efficient search algorithm to detected the nodes in the influence of the integration points was developed. The components are directly coupled with finite elements by using a penalty method. An widely accepted model to describe the fracture behavior of concrete is the >Fictitious Crack Model< which is applied in this study, which differentiates between micro cracks and macro cracks, with and without force transmission over the crack surface, respectively. In this study the crack surface is discretized by node pairs in form of a polygon, which is part of the boundary. To apply the >Fictitious Crack Model< finite interface elements are included between the crack surface nodes. The determination of the maximum principal strain at the crack tip is done by introducing an influence area around the singularity. On a practical example it is shown that the included elements improve the model by the transmission of the surface forces during monotonic loading and by the representation of the contact forces of closed cracks during reverse loading.
Limit state design of hybrid structures with meshless methods using mathematical optimization
(2003)
The revitalization of existing structures belongs to the frequently tasks in urban reconstruction processes. The adaptation for new requirements will commonly affect substantial changes in the general configuration of structures. The resulting revitalized structures are characterized by a hybrid design, where old and new, identical or diverse materials and members will be coupled in different ways. In the planning stage the treatment of these systems leads to application of complex and hybrid mechanical models respectively. High performance numerical instruments have to be applied for solving not only analysis but also targeted design problems. Because of the hybrid character of mechanical models in revitalization planning processes the use of hybrid technologies is advantageous. In this paper mixed domain technique will be used for connecting EFG and FE. The models derived will be adopted for design purposes of non-linear loaded hybrid structures. The investigations show a good adaptability of the meshless methods to the design of hybrid structures by using optimization strategies. With this method the advantages of both finite element and meshless methods can be utilized most suitable. With the property of a minimum amount of unknowns by maintaining an adequate quality of the results the application of mixed finite element and meshless methods is a promising alternative to traditional methods in structural analysis and optimization.
The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given.
The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.
In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI).
The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality.
Re-examination of the behaviour of structures can be necessary due to deterioration or changes in the traffic situation during their lifetime. The Finite Element Method (FEM) is widely used in order to accomplish numerical analysis. Considering the development of computer performance, more detailed FEM models can be analyzed, even on site, with mobile computers. To compensate the increasing amount of data needed for the model input, measures need to be taken to save time, by distributing the work. In order to provide consistency to the model, fedback data must be checked upon reception. A local wireless computer network of ultra-portable devices linked together with a computer can provide the coordination necessary for efficient parallel working. Based on a digital model consisting of all data gathered, structural modelling and numerical analysis are performed automatically. Thus, the user is released from the work that can be automatized and the time needed for the overall analysis of a structure is decreased.
This paper describes an ongoing research on the representation and reasoning about construction specifications, which is part of a bigger research project that aims at developing a formalism for automating the identification of deviations and defects on construction sites. We specifically describe the requirements on product and process models and an approach for representing and reasoning about construction specifications to enable automated detection and assessment of construction deviations and defects. This research builds on the previous research on modeling design specifications and extends and elaborates concept of contexts developed in that domain. The paper provides an overview of how the construction specifications are being modele d in this research and points out future steps that need to be accomplished to develop the envisioned automated deviation and defect detection system.
Although there are some good reasons to design engineering software as a stand-alone application for a single computer, there are also numerous possibilities for creating distributed engineering applications, in particular using the Internet. This paper presents some typical scenarios how engineering applications can benefit from including network capabilities. Also, some examples of Internet-based engineering applications are discussed to show how the concepts presented can be implemented.
Collaboration in AEC Design : Web-enabling Applications using Peer-to-Peer Office Communicator
(2004)
A market analysis conducted by Gartner Dataquest in August 2001 has shown the typical characteristics of the AEC design process. High volatility in membership of AEC design groups and members dispersed over several external offices is the common collaboration scenario. Membership is most times short lived, compared to the overall duration of the process. A technical solution has to take that into account by making joining and leaving a collaborative work group very easy. The modelling of roles of collaboration between group members must be based on a commonly understood principle like the publisher / subscriber model, where the individual that is responsible for the distribution of vital information is clear. Security issues and trust in the confidentiality of the system is a central concern for the acceptance of the system. Therefore, keeping the subset of data that will be published under the absolute control of the publisher is a must. This is not the case with server-based scenarios, sometimes even due to psychological reasons. A loosely bound Peer-to-Peer network offers advantages over a server-based solution, because of less administrative overhead and simple installation procedures. In a peer-to-peer environment, a publish/subscribe role model can be more easily implemented. The publish/subscribe model matches the way AEC processes are modelled in real world scenarios today, where legal proof of information exchange between external offices is of high importance. Workflow management systems for small to midsize companies of the AEC industry may adopt the peer-to-peer approach to collaboration in the future. Further investigations are being made on the research level (WINDS) by integrating the viewer and redlining application Collaborate! into a collaborative environment.