Refine
Has Fulltext
- yes (493) (remove)
Document Type
- Doctoral Thesis (493) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (13)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
In der vorliegenden Arbeit werden Manifestäußerungen des Design- und Architekturdiskurses im situativen, medialen, institutionellen und historischen Kontext untersucht. Auf Grundlage einer Analyse der Etymologie und der Ideengeschichte des Manifestes wird anhand ausgewählter Beispiele die These belegt, dass das Medium vor allem der gezielten Rezeptionssteuerung im Diskurs dient. Darüber hinaus wird die Fähigkeit und Bedeutung des Manifestes als Spiegel vergangener und gegenwärtiger, aber auch als Wegbereiter zukünftiger Diskurse analysiert und Entwicklungen des Manifestes hinsichtlich Stilistik, Inhalt, Funktion und Bedeutung im Design- und Architekturdiskurs dargestellt.
Bei der Produktion von Betonsteinen mit vollautomatischen Steinformmaschinen ist das Füllen der Form mit Betongemenge die erste Phase des Formgebungs- und Verdichtungsprozesses. Trotz langjähriger praktischer Erfahrungen mit Steinformmaschinen wird der Formgebungs- und Verdichtungsprozess nicht ausreichend stabil beherrscht. Im industriellen Routinebetrieb erweist sich insbesondere die Realisierung einer gleichmäßigen Füllung als das primäre Problem. Die in dieser Phase entstehenden Defizite beeinflussen direkt die Qualität der zu erzeugenden Betonsteine. Eine Kompensation dieser Mängel ist mit den nachfolgenden Prozessphasen nicht mehr möglich. Die Zielstellung der vorliegenden Arbeit ist es, ausgehend von einer systematischen Analyse des Formgebungs- und Verdichtungsprozesses im Allgemeinen und der Analyse des Füllvorganges im Besonderen, die tatsächlich an Steinformmaschinen erreichbare Füllungsgüte zu ermitteln, Einflüsse auf die erreichte Füllungsgüte und deren Wechsel-beziehungen zu untersuchen sowie ein Modell zur Beschreibung und Simulation des Füllvorganges zu entwickeln und zu verifizieren. Als wesentliche Voraussetzung für eine systematische Analyse der Füllstufe(n), wird eine Methode zur Berechnung und Bewertung der Füllungsgüte entwickelt. Grundlage der Methode bildet dabei die systematische Erfassung der Steinmassen mi von vollständigen, aufeinander folgend gefertigten Einheiten. Entsprechend der Lage innerhalb der Form und der Folge der gefertigten Einheiten werden die Massen als quantitatives stetiges Merkmal der zu untersuchenden Grundgesamtheit in eine Urliste editiert und für die weitere Auswertung genutzt. Unter Anwendung der entwickelten Methode zur Berechnung und Bewertung der Füllungsgüte wird das tatsächlich im industriellen Routinebetrieb erreichbare Niveau analysiert. Dafür werden in einem erstmals durchgeführten, umfangreichen Feldversuch an elf Steinformmaschinen in Deutschland und der Schweiz die erreichten Füllungsgüten erfasst, die Prozessabläufe dokumentiert und die Wechselbeziehungen zwischen den eingefüllten Massen mi und den Einflussgrößen mit Hilfe der Varianzanalyse nach Variationsursache untersucht. Darüber hinaus werden ausgewählte Festbeton-eigenschaften der Proben bestimmt und deren Korrelation zu den jeweils erreichten Massen mi mit Hilfe der empirischen Regression analysiert. Basierend auf den systematischen Prozessbeobachtungen im industriellen Routinebetrieb wird unter Berücksichtigung der Füllwagenkinematik, des Gemengefüllstandes im Füllwagen und der sukzessiven Übergabe diskreter Massen in die Formzellen ein phänomenologisches Modell zur Beschreibung der ersten Füllstufe entwickelt. Das Bewegungsverhalten des Füllwagens und das Fließverhalten des zu verarbeitenden Betongemenges werden dabei zunächst stark vereinfacht dargestellt. Unter Berücksichtigung der zeilenabhängigen Überdeckungszeit und des Füllstandes im Füllwagen werden koordinatenabhängige Druckprofile im Füllraum, so genannte Zellendruck-Zeit-Funktionen, entwickelt. Als Arbeitshypothese wird formuliert, dass mit diesen Funktionen die unterschiedlichen Bedingungen während des Füllvorgangs im Prozessraum beschrieben werden können und diese Funktionen darüber hinaus mit den im Ergebnis des Vorgangs eingefüllten Massen mi korrelieren. Zur numerischen Nachbildung der ersten Füllstufe bei der Betonsteinherstellung wird die auf der Diskrete-Elemente-Methode basierenden Simulationssoftware Particle Flow Code in 3 Dimensions genutzt. Damit wird es möglich, den Verlauf des Füllprozesses und die sich im Prozessraum ausbildenden Fließprofile durch eine realitätsnahe Computeranimation detailliert und gut einsehbar darzustellen. An Hand der numerisch erzeugten Füllungsgüten wird eine Gegenüberstellung mit den empirischen Ergebnissen möglich. Gleichzeitig erfolgt die Berechnung der Druck-Zeit-Funktionen am Boden aller Formzellen, um kausale Wechselbeziehungen zwischen der Füllaufgabe, der Füllausrüstung und dem Prozessverlauf bzw. dem Prozessergebnis aufzeigen zu können. Zur Verifizierung des der Simulation zu Grunde gelegten Gesamtmodells wird das numerische Experiment an einer speziellen Versuchseinrichtung nachgestellt. Um die Aufnahme der Zellendruck-Zeit-Funktionen während des Füllens vornehmen zu können, ohne dadurch den Füllvorgang zu stören, wird ein eigens für den Verifizierungsversuch entwickelter Drucksensor genutzt. Auf allen Abstraktionsebenen werden die Ergebnisse mit den für den industriellen Routinebetrieb entwickelten Methoden ausgewertet und gegenübergestellt. Mit Hilfe von Varianzanalysen wird die Einflussstärke verschiedener Parameter verglichen. Zur Überprüfung der Arbeitshypothese werden die Zellendruck-Zeit-Funktionen während der numerischen und der realen Experimente aufgenommen und die Korrelationen zu den eingefüllten Massen mi überprüft.
Die elektronische Virtualisierung von Baudenkmalen ist neues, außergewöhnlich vielfältiges medientechnisches Phänomen; es beschreibt die ursprüngliche Form substanziell-realer Baudenkmale, transformiert sie von einer abstrakten Beschreibung in Wort und Bild in eine immaterielle Realität. Die Dissertation versucht Antworten zu geben auf folgende Fragen: Ist die elektronische Virtualisierung eine Methode der Stimulation der Öffentlichkeit im Umgang mit Baudenkmalen? Ist das elektronisch virtualisierte Baudenkmal ein immaterielles Zeugnis der Kulturgeschichte in der Zukunft? Ist das substanziell-reale und das virtualisierte Baudenkmal uneingeschränkt gegenseitig austauschbar, ist ersteres durch letzteres ersetzbar? Die Beantwortung der Fragen hängt ab von den Stufen der Perfektion der elektronischen Virtualsierung von Baudenkmalen.
Die Arbeit „Das Bild der Zwischenstadt“ sucht nach Möglichkeiten zur Qualifizierung der verstädterten Landschaft, für die Thomas Sieverts den Begriff „Zwischenstadt“ geprägt hat. Die Auseinandersetzung mit „räumlicher Identität“ steht dabei im Mittelpunkt: In deren Dekodierung und Inszenierung wird ein Potenzial erkannt, die Aufenthalts- und Erlebnisqualität der Zwischenstadt zu verbessern. Der Betrachtungsraum der Arbeit zwischen Frankfurt am Main und seinen prosperierenden Umlandgemeinden eignet sich in besonderer Weise, die „Anatomie der Zwischenstadt“ zu dekodieren. Schicht für Schicht wird der Versuch unternommen, die eigene Sprache dieses Raumes zu entziffern. Dabei werden Methoden der Beschreibung und Darstellung entwickelt, die den spezifischen räumlichen Eigenschaft der Zwischenstadt gerecht zu werden suchen. Die Ergebnisse dieser Auseinandersetzung lassen deutliche Transformationen in der Zwischenstadt erkennen und entheben sie aus ihrer vermeintlichen Eigenschaftslosigkeit. Orte mit Bedeutung, Zusammenhänge und Raumgeschichten werden lesbar, es zeigen sich Ansätze eigener Urbanität und Zentralität. Die Zwischenstadt hat sich von ihrer einseitigen Dependenz zur Kernstadt gelöst, tritt aber gleichzeitig in einen umfassenden Wandel, um sich geänderten Lebensformen und Bedürfnissen anzupassen. Ältere, den Raum prägende Einfamilienhausgebiete und Großsiedlungen, aber auch monofunktionale Gewerbegebiete und die typischen suburbanen Einkaufszentren erfüllen keineswegs mehr automatisch die Wohnwünsche und Anforderungen einer Dienstleistungs- und Freizeitgesellschaft. Die Arbeit greift die unverkennbare Transformation des Bildes der Zwischenstadt als Chance zur Qualifizierung dieses Raumes auf. Entwickelt werden Qualifizierungsmodelle, die der Tendenz zu Segregation und Abtrennung mit einer neuen Integrationskultur für die Zwischenstadt begegnen: Als prägender Lebensraum der Stadtregion muss die Zwischenstadt einen großen Teil der Bedürfnisse Ihrer Bewohner und Benutzer an den Raum befriedigen. Zunehmend sind diese Bedürfnisse nicht nur funktioneller Art, sondern werden überlagert von einem Bedürfnis nach Raumqualität, Verortung und Identifikationsmöglichkeiten. Für diese Bedürfnisse angemessene und auratische Raumbilder zu finden oder zu inszenieren, ist im Angesicht des Status Quo der Stadtlandschaft eine wichtige Herausforderung.
Das im Jahre 2003 verabschiedete und 2006 in Kraft getretene UNESCO-Übereinkommen zur Bewahrung des immateriellen Kulturerbes erweitert das Kulturverständnis von gebautem Kulturerbe gemäß der Konvention aus dem Jahre 1972 durch gelebtes Kulturerbe. Die Dissertation zeigt beispielhaft, wie sich Bürger einer Stadt und einer Region mit ihrer historischen Vergangenheit befassen und dass es lohnenswert ist, sich mit ihrem ererbten immateriellen Kulturerbe auseinander zu setzen. Sie bezeugt, dass eine moderne populäre Kultur die Pflege des immateriellen Kulturerbes voranbringt, dass personalisierte und vergesellschaftete Individuen die Sorge um den drohenden Kulturverlust ernst nehmen und diesem aktiv, eigenständig und unpolitisch entgegen treten. Ausgehend von der wertphilosophischen und kulturtheoretischen Annäherung werden im zweiten und dritten Kapitel beispielhaft die Ur-Inszenierung im Jahre 1475 und die Re-Inszenierung im 21. Jahrhundert gegenübergestellt. Die Ergebnisse aus der Untersuchung werden im vierten Kapitel diskutiert. An Hand der Promotionsschrift wird versucht, Antworten auf folgende Fragen zu finden: - Hat die Re-Inszenierung der „Landshuter Fürstenhochzeit 1475“ des 21. Jahrhunderts das Potential eines immateriellen Kulturerbes? - Kann sie den negativen Begleiterscheinungen des Generations- wechsels und der Globalisierung entgegentreten? - Ist sie eine zeitgenössische Transformationsmethode von (Denkmal)Werten? - Was sind die Schutzkomponenten? - Trägt die Re-Inszenierung zu der kulturellen Identität einer Stadt an authentischem Ort bei und hat sie Einfluss auf die Gestaltung der baulich-räumlichen Umwelt?
The main objective of the present work is to establish a link between the scientific fields of engineering seismology and structural engineering. Substantially it deals with the application and enhancements of methods coming from engineering seismology as well as their junctions to the fields of structural engineering respectively earthquake engineering. Based on real occurred earthquake damage inflicted to multistoried reinforced-concrete frame buildings, the influence of local site effects on the grade of structural damage is worked out. This relying on comprehensive investigations conducted during numerous field missions of German TaskForce after damaging earthquakes in Venezuela and Türkiye. Instrumental investigations on both the structure and its local subsoil in order to identify the damage potential of seismic ground motion take center stage of the thesis. Thereby it is examined whether or not an estimated seismic demand representative in amplitude level and frequency characteristics is able to cause structural damage considering the vulnerability of the structure itself as well as the local site and subsoil conditions. Investigations are concentrated on selected RC frame structures with or without masonry infill walls.
This dissertation is devoted to the theoretical development and experimental laboratory verification of a new damage localization method: The state projection estimation error (SP2E). This method is based on the subspace identification of mechanical structures, Krein space based H-infinity estimation and oblique projections. To explain method SP2E, several theories are discussed and laboratory experiments have been conducted and analysed.
A fundamental approach of structural dynamics is outlined first by explaining mechanical systems based on first principles. Following that, a fundamentally different approach, subspace identification, is comprehensively explained. While both theories, first principle and subspace identification based mechanical systems, may be seen as widespread methods, barely known and new techniques follow up. Therefore, the indefinite quadratic estimation theory is explained. Based on a Popov function approach, this leads to the Krein space based H-infinity theory. Subsequently, a new method for damage identification, namely SP2E, is proposed. Here, the introduction of a difference process, the analysis by its average process power and the application of oblique projections is discussed in depth.
Finally, the new method is verified in laboratory experiments. Therefore, the identification of a laboratory structure at Leipzig University of Applied Sciences is elaborated. Then structural alterations are experimentally applied, which were localized by SP2E afterwards. In the end four experimental sensitivity studies are shown and discussed. For each measurement series the structural alteration was increased, which was successfully tracked by SP2E. The experimental results are plausible and in accordance with the developed theories. By repeating these experiments, the applicability of SP2E for damage localization is experimentally proven.
This thesis explores how cultural heritage plays a role in the development of urban identity by engaging both actively and passively with memory, i.e. remembering and forgetting. I argue that architectural heritage is a medium where specific cultural and social decisions form its way of presentation, and it reflects the values and interests of the period. By the process of remembering and forgetting, the meanings between inhabitant and object in urban environment are practiced, and the meanings are created.
To enable the research in narrative observation, cultural tourism management is chosen as the main research object, which reflects the alteration of interaction between the architectural heritage and urban identity. Identifying the role of heritage management, the definition of social resilience and the prospects of cultural heritage as a means of social resilience are addressed. Case region of the research is East Ger- many, thereby, the study examines the distinct approaches and objectives regarding heritage management under the different political systems along the German reunification process.
The framework is based on various theoretical paradigms to investigate the broad research questions: 1) What is the role of historic urban quarters in the revitalisation of East German towns? 2) How was the transition processed by cultural heritage management? 3) How did policy affect residents’ lives?
The case study is applied to macro level (city level: Gotha and Eisenach) and micro level study (object level: specific heritage sites), to analyse the performance of selective remembering and making tourist destination through giving significance to specific heritage. By means of site observations, archival research, qualitative inter- views, photographs, and discourse analysis on printed tourism materials, the study demonstrates that certain sites and characteristics of the city enable creating and focusing messages, which aids the social resilience.
Combining theory and empirical studies this thesis attempts to widen the academic discussion regarding the practice of remembering and forgetting driven by cultural heritage. The thesis argues for cultural heritage tourism as an element of social resilience and one that embraces the historic and cultural identity of the inhabitants.
Cultural Heritage on Mobile Devices: Building Guidelines for UNESCO World Heritage Sites' Apps
(2021)
Technological improvements and access provide a fertile scenario for creating and developing mobile applications (apps). This scenario results in a myriad of Apps providing information regarding touristic destinations, including those with a cultural profile, such as those dedicated to UNESCO World Heritage Sites (WHS). However, not all of the Apps have the same efficiency. In order to have a successful app, its development must consider usability aspects and features aligned with reliable content. Despite the guidelines for mobile usability being broadly available, they are generic, and none of them concentrates specifically into cultural heritage places, especially on those placed in an open-air scenario. This research aims to fulfil this literature gap and discusses how to adequate and develop specific guidelines for a better outdoor WHS experience. It uses an empirical approach applied to an open-air WHS city: Weimar and its Bauhaus and Classical Weimar sites. In order to build a new set of guidelines applied for open-air WHS, this research used a systematic approach to compare literature-based guidelines to industry-based ones (based on affordances), extracted from the available Apps dedicated to WHS set in Germany. The instructions compiled from both sources have been comparatively tested by using two built prototypes from the distinctive guidelines, creating a set of recommendations collecting the best approach from both sources, plus suggesting new ones the evaluation.
This thesis focuses on the cryptanalysis and the design of block ciphers and hash func- tions. The thesis starts with an overview of methods for cryptanalysis of block ciphers which are based on differential cryptanalysis. We explain these concepts and also sev- eral combinations of these attacks. We propose new attacks on reduced versions of ARIA and AES. Furthermore, we analyze the strength of the internal block ciphers of hash functions. We propose the first attacks that break the internal block ciphers of Tiger, HAS-160, and a reduced round version of SHACAL-2. The last part of the thesis is concerned with the analysis and the design of cryptographic hash functions. We adopt a block cipher attack called slide attack into the scenario of hash function cryptanalysis. We then use this new method to attack different variants of GRINDAHL and RADIOGATUN. Finally, we propose a new hash function called TWISTER which was designed and pro- posed for the SHA-3 competition. TWISTER was accepted for round one of this com- petition. Our approach follows a new strategy to design a cryptographic hash function. We also describe several attacks on TWISTER and discuss the security issues concern- ing these attack on TWISTER.
Identification of flaws in structures is a critical element in the management of maintenance and quality assurance processes in engineering. Nondestructive testing (NDT) techniques based on a wide range of physical principles have been developed and are used in common practice for structural health monitoring. However, basic NDT techniques are usually limited in their ability to provide the accurate information on locations, dimensions and shapes of flaws. One alternative to extract additional information from the results of NDT is to append it with a computational model that provides detailed analysis of the physical process involved and enables the accurate identification of the flaw parameters. The aim here is to develop the strategies to uniquely identify cracks in two-dimensional 2D) structures under dynamic loadings.
A local NDT technique combined eXtended Finite Element Method (XFEM) with dynamic loading in order to identify the cracks in the structures quickly and accurately is developed in this dissertation. The Newmark-b time integration method with Rayleigh damping is used for the time integration. We apply Nelder-Mead (NM)and Quasi-Newton (QN) methods for identifying the crack tip in plate. The inverse problem is solved iteratively, in which XFEM is used for solving the forward problem in each iteration. For a timeharmonic excitation with a single frequency and a short-duration signal measured along part of the external boundary, the crack is detected through the solution of an inverse time-dependent problem. Compared to the static load, we show that the dynamic loads are more effective for crack detection problems. Moreover, we tested different dynamic loads and find that NM method works more efficient under the harmonic load than the pounding load while the QN method achieves almost the same results for both load types.
A global strategy, Multilevel Coordinate Search (MCS) with XFEM (XFEM-MCS) methodology under the dynamic electric load, to detect multiple cracks in 2D piezoelectric plates is proposed in this dissertation. The Newmark-b method is employed for the time integration and in each iteration the forward problem is solved by XFEM for various cracks. The objective functional is minimized by using a global search algorithm MCS. The test problems show that the XFEM-MCS algorithm under the dynamic electric load can be effectively employed for multiple cracks detection in piezoelectric materials, and it proves to be robust in identifying defects in piezoelectric structures. Fiber-reinforced composites (FRCs) are extensively applied in practical engineering since they have high stiffness and strength. Experiments reveal a so-called interphase zone, i.e. the space between the outside interface of the fiber and the inside interface of the matrix. The interphase strength between the fiber and the matrix strongly affects the mechanical properties as a result of the large ratio of interface/volume. For the purpose of understanding the mechanical properties of FRCs with functionally graded interphase (FGI), a closed-form expression of the interface strength between a fiber and a matrix is obtained in this dissertation using a continuum modeling approach according to the ver derWaals (vdW) forces. Based on the interatomic potential, we develop a new modified nonlinear cohesive law, which is applied to study the interface delamination of FRCs with FGI under different loadings. The analytical solutions show that the delamination behavior strongly depends on the interphase thickness, the fiber radius, the Young’s moduli and Poisson’s ratios of the fiber and the matrix. Thermal conductivity is the property of a material to conduct heat. With the development and deep research of 2D materials, especially graphene and molybdenum disulfide (MoS2), the thermal conductivity of 2D materials attracts wide attentions. The thermal conductivity of graphene nanoribbons (GNRs) is found to appear a tendency of decreasing under tensile strain by classical molecular dynamics (MD) simulations. Hence, the strain effects of graphene can play a key role in the continuous tunability and applicability of its thermal conductivity property at nanoscale, and the dissipation of thermal conductivity is an obstacle for the applications of thermal management. Up to now, the thermal conductivity of graphene under shear deformation has not been investigated yet. From a practical point of view, good thermal managements of GNRs have significantly potential applications of future GNR-based thermal nanodevices, which can greatly improve performances of the nanosized devices due to heat dissipations. Meanwhile, graphene is a thin membrane structure, it is also important to understand the wrinkling behavior under shear deformation. MoS2 exists in the stable semiconducting 1H phase (1H-MoS2) while the metallic 1T phase (1T-MoS2) is unstable at ambient conditions. As it’s well known that much attention has been focused on studying the nonlinear optical properties of the 1H-MoS2. In a very recent research, the 1T-type monolayer crystals of TMDCs, MX2 (MoS2, WS2 ...) was reported having an intrinsic in-plane negative Poisson’s ratio. Luckily, nearly at the same time, unprecedented long-term (>3months) air stability of the 1T-MoS2 can be achieved by using the donor lithium hydride (LiH). Therefore, it’s very important to study the thermal conductivity of 1T-MoS2.
The thermal conductivity of graphene under shear strain is systematically studied in this dissertation by MD simulations. The results show that, in contrast to the dramatic decrease of thermal conductivity of graphene under uniaxial tensile, the thermal conductivity of graphene is not sensitive to the shear strain, and the thermal conductivity decreases only 12-16%. The wrinkle evolves when the shear strain is around 5%-10%, but the thermal conductivity barely changes.
The thermal conductivities of single-layer 1H-MoS2(1H-SLMoS2) and single-layer 1T-MoS2 (1T-SLMoS2) with different sample sizes, temperatures and strain rates have been studied systematically in this dissertation. We find that the thermal conductivities of 1H-SLMoS2 and 1T-SLMoS2 in both the armchair and the zigzag directions increase with the increasing of the sample length, while the increase of the width of the sample has minor effect on the thermal conductions of these two structures. The thermal conductivity of 1HSLMoS2 is smaller than that of 1T-SLMoS2 under size effect. Furthermore, the temperature effect results show that the thermal conductivities of both 1H-SLMoS2 and 1T-SLMoS2 decrease with the increasing of the temperature. The thermal conductivities of 1HSLMoS2 and 1T-SLMoS2 are nearly the same (difference <6%) in both of the chiral orientations under corresponding temperatures, especially in the armchair direction (difference <2.8%). Moreover, we find that the strain effects on the thermal conductivity of 1HSLMoS2 and 1T-SLMoS2 are different. More specifically, the thermal conductivity decreases with the increasing tensile strain rate for
1T-SLMoS2, while fluctuates with the growth of the strain for 1HSLMoS2. Finally, we find that the thermal conductivity of same sized 1H-SLMoS2 is similar with that of the strained 1H-SLMoS2 structure.
In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible.
Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution.
Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance.
Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis.
Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements.
Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction.
For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem.
Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field.
From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element.
As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section.
Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis.
In recent years increasingly consideration has been given to the lifetime extension of existing structures. This is based on the fact that a growing percentage of civil infrastructure as well as buildings is threatened by obsolescence and that due to simple monetary reasons this can no longer be countered by simply re-building everything anew. Hence maintenance interventions are required which allow partial or complete structural rehabilitation. However, maintenance interventions have to be economically reasonable, that is, maintenance expenditures have to be outweighed by expected future benefits. Is this not the case, then indeed the structure is obsolete - at least in its current functional, economic, technical, or social configuration - and innovative alternatives have to be evaluated. An optimization formulation for planning maintenance interventions based on cost-benefit criteria is proposed herein. The underlying formulation is as follows: (a) between maintenance interventions structural deterioration is described as a random process; (b) maintenance interventions can take place anytime throughout lifetime and comprise the rehabilitation of all deterioration states above a certain minimum level; and (c) maintenance interventions are optimized by taking into account all expected life-cycle costs (construction, failure, inspection and state-dependent repair costs) as well as state- or time-dependent benefit rates. The optimization is performed by an evolutionary algorithm. The proposed approach also allows to determine optimal lifetimes and acceptable failure rates. Numerical examples demonstrate the importance of defining benefit rates explicitly. It is shown, that the optimal solution to maintenance interventions requires to take action before reaching the acceptable failure rate or the zero expected net benefit rate level. Deferring decisions with respect to maintenance not only results, in general, in higher losses, but also results in overly hazardous structures.
El presente trabajo se inscribe en el campo de los estudios urbanos y plantea como ejes estructurantes la intersección entre las políticas públicas, el barrio y las prácticas del habitar (de Certeau, 1996, 1999; Gravano, 2003) en el marco de las transformaciones del espacio urbano en los barrios pericentrales, también denominados tradicionales de la ciudad de Córdoba, particularmente lo acontecido en Barrio Güemes, durante el periodo 2010-2016.
El propósito del abordaje se inscribe en conocer y realizar aportes generalizables a la comprensión de las prácticas del habitar como unidad de análisis. En ese marco, el problema de investigación se formula en el siguiente interrogante: ¿cómo se modifican las prácticas del habitar en el marco de las transformaciones urbanas, en un modo de producción capitalista? Se entiende a las prácticas como acciones elementales de las “artes de hacer” que las personas ordinarias ponen en marcha en su vida cotidiana: para circular, cocinar, trabajar, vincularse. También, a través de las mismas resignifican los espacios, les otorgan una valoración (positiva o negativa), se identifican como parte de la identidad y a su vez se reconocen lugares de (des)encuentro y vías de circulación.
Para su abordaje se toma como unidad de estudio el caso de barrio Güemes. El recorte espacial (o físico) del trabajo empírico está localizado en la ciudad de Córdoba, y se sitúa en la periferia del área central. Esta localización permite comprender el surgimiento de las primeras expansiones urbanas como consecuencia del crecimiento demográfico y cómo estas, se transformaron en los primeros barrios. El recorte temporal se encuentra delimitado entre los años 2000 y 2016, respaldado intencionalmente por dos acontecimientos significativos: el censo de población (2001) y la celebración del Bicentenario de la Independencia en Argentina.
Los cambios materializados en ciertos espacios urbanos, tanto en ciudades latinoamericanas (Buenos Aires, Salvador de Bahía en Brasil, México Distrito Federal, etc.) como en otras partes del mundo (New Orleans en los Estados Unidos, el distrito de Kreuzberg- Friedrichshain en Berlín, el puerto de Hamburgo en Alemania, etc.) demuestran cómo estos espacios se van transformado acorde al modo de reproducción capitalista. Pues, se trataba de espacios que en algún momento cumplieron funciones económicas-sociales jerarquizadas y luego por la dinámica misma del capitalismo, la sobreacumulación, dejan de ser rentables y pasan a ser espacios “obsoletos”. En ese sentido, la omisión de acciones públicas y/o privadas, la desatención y el crecimiento de situaciones sociales conflictivas (delitos, inseguridad, degradación) en estos espacios, funciona como argumento para que los gobiernos locales comiencen a planear el futuro y modernizarlos.
De esta manera, se plantean políticas urbanas con el objetivo de impulsar acciones de renovación o rehabilitación para dinamizar económicamente determinados sectores. Dos elementos discursivos aparecen como posibilitadores del proceso de renovación urbana: el turismo y el patrimonio. En ese sentido, bajo la recuperación patrimonial de ciertos lugares se dinamizan los territorios, por lo que el turismo se vuelve una herramienta económica que produce un excedente de plusvalía. La puesta en valor de bienes tangibles e intangibles atrae la afluencia de visitantes y, a la vez, es rentable económicamente. Ahora bien, muchas veces los proyectos tienen en cuenta las variables morfológicas y físicas, dejando en un segundo plano el impacto en el espacio próximo y las relaciones entre los habitantes con su territorio. Actualmente los espacios elegidos por los municipios para la intervención pública y/o privada son los barrios, puesto que son espacios cercanos al centro y considerados estratégicos. Por lo general, el argumento es la necesidad de rehabilitar/renovar zonas poco aprovechadas o degradadas con el objetivo de mejorar la calidad de vida de la población y dinamizar el sector (Brites, 2017; Guevara, 2012). Desde los 2000 el barrio Güemes asiste a un proceso de crecimiento inusitado. La cantidad de artesanos se disparó y variedad de productos ofrecidos, emergieron los comercios que forman parte de la oferta comercial, gastronómica y cultural del barrio. Hace varios años, presenta nuevos actores económicos que se pueden observar en la apertura de galerías comerciales; ubicadas sobre el eje de las calles Belgrano, Achával Rodríguez, Fructuoso Rivera y la creciente aparición de edificaciones alrededor de la feria artesanal histórica; con la venta y exposición de piezas del arte plástico, gastronomía, negocios de diseñadores cordobeses y hasta la inclusión de la idea del del “desarrollo sustentable” en los techos de las galerías.
La modificación del corpus normativo, la aparición de edificación en altura y el boom económico tuvieron como resultado, la valorización del suelo urbano, la retroalimentación en el espacio con el emplazamiento de nuevas actividades comerciales y servicios culturales. A la par, en el espacio barrial se presentan nuevos residentes con otros hábitos y prácticas que ponen en disputa los modos de habitar en el espacio.
A riesgo de simplificar, estas transformaciones fueron producto de los cambios políticoideológicos, de los modelos e instrumentos de gestión urbana puestos en juego en los diversos momentos históricos y de las propias prácticas sociales y culturales de los habitantes. De esta manera, se centrará la mirada analítica en las transformaciones de las prácticas del habitar de los pobladores de los Barrios Güemes, en el marco de la metamorfosis del espacio urbano (atravesado por tendencias de mediatización y mercantilización de la experiencia) que conjugó un proceso de intersección y asociatividad entre políticas públicas y expansión inmobiliaria.
Die Dissertation setzt sich mit der Aufarbeitung der Aufnahme vorhandener Bauwerke hinsichtlich der IT-Unterstützung des Aufnahmeprozesses, auswertbarer Gebäudemodelle und der Bereitstellung von Informationen für die Planung auseinander. In der Arbeit ist der Bauaufnahmeprozeß gegliedert worden sowie die entstehenden Informationsmengen analysiert. Untersuchungen des aufzunehmenden Gegenstandes, der Strukturierung, der Aufnahme – hinsichtlich der Aufnahmegeräte und –methoden- und der Präsentation dienten als Grundlage für eine IT-Unterstützung. Die Aufnahme erfolgt immer als ein Prozeß der Modellbildung. Als IT-Paradigma bietet sich die „Objektorientierte Modellierungstechnologie“ an. Diese wurde einer Bewertung unterzogen. Mit Hinblick auf den konkreten Sachverhalt der Bauaufnahme, wie imperfekte und schwer formalisierbare Informationen, sind Erweiterungen berücksichtigt worden. Aus den diskutierten Ansätzen wurde ein Systemkonzept abgeleitet und Teilaspekte exemplarisch realisiert.
Gegenstand der vorliegenden Arbeit ist die Konzeption und prototypische Umsetzung von Techniken des Computer Supported Cooperative Work (CSCW) im Rahmen einer integrierten objektorientierten und dynamischen Bauwerksmodellverwaltung zur Unterstützung der Bauwerksplanung. Die Planung von Bauwerken ist durch einen hohen Grad an Arbeitsteiligkeit, aber auch durch eine schwache Strukturierung der ablaufenden Prozesse gekennzeichnet. Besonders durch den Unikatcharakter des Planungsgegenstands \'Bauwerk\' ergeben sich signifikante Unterschiede zum Entwurf anderer, durch Serienfertigung produzierter Industriegüter. Zunehmend wird die Planung von Bauwerken in Virtual Enterprises ausgeführt, die sich durch eine dynamische Organisationsstruktur, geographische Verteilung der Partner, schwer normierbare Informationsflüsse und eine häufig stark heterogene informationstechnische Infrastruktur auszeichnen. Zur rechnerinternen Repräsent! ation des Planungsgegenstands haben sich objektorientierte Bauwerksmodelle bewährt. Aufgrund der Veränderlichkeit der Bauwerke und deren rechnerinterner Repräsentation im Laufe des Bauwerkslebenszyklus ist eine dynamische Anpassung der Modelle unumgänglich. Derartige in Form von Taxonomien dargestellte dynamische Bauwerksmodellstrukturen können gemeinsam mit den in Instanzform vorliegenden konkreten Projektinformationen in entsprechenden Modellverwaltungssystemen (MVS) gehandhabt werden. Dabei wird aufgrund der Spezialisierung und Arbeitsteilung im Planungsprozess von einer inhaltlich verknüpften Partialmodellstruktur, die räumlich verteilt sein kann, ausgegangen. Die vorgeschlagenen Methoden zur Koordinierung der Teamarbeit in der Bauwerksplanung beruhen auf der Nutzung von CSCW–Techniken für \'Gemeinsame Informationsräume\' und \'Workgroup Computing\', die im Kontext der als Integrationsbasis fungierenden Modellverwaltungssysteme umgesetzt werden. Dazu werden die zur d! ynamischen Bauwerksmodellierung erforderlichen Metaebenenfunk! tionalitäten sowie Ansätze zur Implementierung von Modellverwaltungskernen systematisiert. Ebenso werden notwendige Basistechniken für die Realisierung von MVS untersucht und eine Architektur zur rollenspezifischen Präsentation dynamischer Modellinhalte vorgestellt. Da klassische Schichtenmodelle nicht auf die Verhältnisse in Virtual Enterprises angewendet werden können, wird eine physische Systemarchitektur mit einem zentralen Projektserver, Domänenservern und Domänenclients vorgestellt. Ebenso werden Techniken zur Sicherung des autorisierten Zugriffs sowie des Dokumentencharakters beschrieben. Zur Unterstützung der asynchronen Phasen der Kooperation wird der gemeinsame Informationsraum durch Mappingtechniken zur Propagation und Notifikation von Änderungsdaten bezüglich relevanter Modellinformationen ergänzt. Zur Unterstützung synchroner Phasen werden Techniken zur Schaffung eines gemeinsamen Kontexts durch relaxierte WYSIWIS–Präsentationen auf Basis der Modellinformationen! verbunden mit Telepresence–Techniken vorgestellt. Weiterhin werden Methoden zur Sicherung der Group–Awareness für alle Kooperationsphasen betrachtet.
Computer Spiel Welten
(2000)
Eine diskursarchäologische Studie zur Entstehung von Computerspielen entlang der Begriffe von Reaktion, Entscheidung und Regulation in Mensch-Maschine-Systemen. Sie rekonstruiert die Emergenz des Computerspiels aus heterogenen Wissensbereichen wie Experimentalpsychologie, Arbeitswissenschaft, Kriegstechnologie, Hard- und Softwaregeschichte, Graphentheorie, Meteorologie, Speläologie, Philosophie, Behaviorismus, Kognitionswissenschaft, Spieltheorie und Kybernetik.
The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME)
shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes
near the crack such as blending or shifting.
As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation.
In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected
pipes.
Encapsulation-based self-healing concrete has received a lot of attention nowadays in civil engineering field. These capsules are embedded in the cementitious matrix during concrete mixing. When the cracks appear, the embedded capsules which are placed along the path of incoming crack are fractured and then release of healing agents in the vicinity of damage. The materials of capsules need to be designed in a way that they should be able to break with small deformation, so the internal fluid can be released to seal the crack. This study focuses on computational modeling of fracture in encapsulation-based selfhealing concrete. The numerical model of 2D and 3D with randomly packed aggreates and capsules have been developed to analyze fracture mechanism that plays a significant role in the fracture probability of capsules and consequently the self-healing process. The capsules are assumed to be made of Poly Methyl Methacrylate (PMMA) and the potential cracks are represented by pre-inserted cohesive elements with tension and shear softening laws along the element boundaries of the mortar matrix, aggregates, capsules, and at the interfaces between these phases. The effects of volume fraction, core-wall thickness ratio, and mismatch fracture properties of capsules on the load carrying capacity of self-healing concrete and fracture probability of the capsules are investigated. The output of this study will become valuable tool to assist not only the experimentalists but also the manufacturers in designing an appropriate capsule material for self-healing concrete.
Encapsulation-based self-healing concrete (SHC) is the most promising technique for providing a self-healing mechanism to concrete. This is due to its capacity to heal fractures effectively without human interventions, extending the operational life and lowering maintenance costs. The healing mechanism is created by embedding capsules containing the healing agent inside the concrete. The healing agent will be released once the capsules are fractured and the healing occurs in the vicinity of the damaged part. The healing efficiency of the SHC is still not clear and depends on several factors; in the case of microcapsules SHC the fracture of microcapsules is the most important aspect to release the healing agents and hence heal the cracks. This study contributes to verifying the healing efficiency of SHC and the fracture mechanism of the microcapsules. Extended finite element method (XFEM) is a flexible, and powerful discrete crack method that allows crack propagation without the requirement for re-meshing and has been shown high accuracy for modeling fracture in concrete. In this thesis, a computational fracture modeling approach of Encapsulation-based SHC is proposed based on the XFEM and cohesive surface technique (CS) to study the healing efficiency and the potential of fracture and debonding of the microcapsules or the solidified healing agents from the concrete matrix as well. The concrete matrix and a microcapsule shell both are modeled by the XFEM and combined together by CS. The effects of the healed-crack length, the interfacial fracture properties, and microcapsule size on the load carrying capability and fracture pattern of the SHC have been studied. The obtained results are compared to those obtained from the zero thickness cohesive element approach to demonstrate the significant accuracy and the validity of the proposed simulation. The present fracture simulation is developed to study the influence of the capsular clustering on the fracture mechanism by varying the contact surface area of the CS between the microcapsule shell and the concrete matrix. The proposed fracture simulation is expanded to 3D simulations to validate the 2D computational simulations and to estimate the accuracy difference ratio between 2D and 3D simulations. In addition, a proposed design method is developed to design the size of the microcapsules consideration of a sufficient volume of healing agent to heal the expected crack width. This method is based on the configuration of the unit cell (UC), Representative Volume Element (RVE), Periodic Boundary Conditions (PBC), and associated them to the volume fraction (Vf) and the crack width as variables. The proposed microcapsule design is verified through computational fracture simulations.