Refine
Document Type
- Conference Proceeding (54)
- Doctoral Thesis (1)
Institute
- Professur Informatik im Bauwesen (55) (remove)
Keywords
- Finite-Elemente-Methode (8)
- Modellierung (7)
- CAD (6)
- Bauwesen (4)
- Tragwerk (4)
- Bauaufnahme (3)
- Datenaustausch (3)
- Dynamische Belastung (3)
- Informationsmanagement (3)
- Algorithmus (2)
Year of publication
- 2000 (55) (remove)
Rectangular steel frames are considered and subjected to strong ground motion. Their behavior factor is numerically evaluated using nonlinear time history analysis and different ground acceleration records. The behavior factor is determined assuming severe collapse mechanism occurs throughout the time history. The system of equations is transformed into single equation end then the energy balance concept is applied. The expression for the behavior factor is derived and its application to four story two bays steel frame is illustrated and the corresponding results are discussed.
Informations-und Kommunikationtechniken haben im Bauwesen noch nicht die gewünschten Vorteile für Kosten und Qualität von Bauobjekten erzielt. Die Vielfalt der dafür genutzten Systeme und Formate führt häufig zu Redundanzen und Informationsverlusten in den Planungs- und Bauprozessen sowie Problemen beim Datenaustausch zwischen den Systemen. Durch die Datenmengen, die in CAD, AVA, Terminplanung, Tabellenkalkulation, Textverarbeitung etc. durch unterschiedliche Beteiligte erzeugt werden, ist darüber hinaus das Risiko einer unterschiedlichen Datenaktualität enorm. Als Konsequenz dieser Erkenntnisse bestand die Aufgabe, eine ganzheitliche und durchgängige Produkt- und Prozeßstrategie für den preiswerten Einfamilienhausbau zu entwickeln. Die Grundlage dafür bildet ein komplexes System von rationellen Entwurfsregeln, Konstruktionslösungen und Bau- und Baustofflogistikkonzepten auf der Basis moderner Informations- und Kommunikationstechnologien.
The steel structure design codes require to check up the member strength when evaluating plastic deformations. The model of perfectly plastic material is accepted. The strength criteria for simple cross-sections (I section, etc.) of steel members are given in design codes. The analytical strength criteria for steel cross-sections and numerical approaches based on stepwise procedure are investigated in many articles. Another way for checking the carrying capacity of cross-sections is the use of methods that are applied for defining strain-deformed state of elastic perfectly plastic systems. In this paper non-iterative methods are suggested for checking strength of cross-sections. Carrying capacity of cross section is verified according to extremum principle of plastic fail under monotonically loading and the strain-deformed state of cross-section is defined according to extremum energy principals of elastic potential of residual stresses and complementary work of residual displacements. The mathematical expressions of these principals for discrete cross-section are formulated as problems of convex mathematical programming. The cross-section of steel member using finite element method is divided into free form plane elements. The constant distribution of stresses along the finite element is accepted. The relationships of finite elements for static formulation of the problem are formed so, that kinematics formulation relationships could be obtained in a formal way using the theory of duality. Numerical examples of determination of cross-section strength, composition of interactive curves and composition of moment-curvature curves for different axial force levels are presented.
Seismic insulation is one of the most progressive types of seismic protection. Seismic insulation is understood as applying special devices for reducing of inertial seismic loads acting on a building. The constructions, shown in article, significantly more effectively solve problems of seismic protection, comparing to the existing seismic insulation systems (SIS). The Special Mechanical Engineering Design Office has developed, manufactured and tested a shock-absorber unit (SAU) of large load capacity. The SAU represents a block of number of pneumatic shock-absorbers (PSA), concentrically mounted round the guiding cylinder. The protected object rests upon the upper movable part of the guiding cylinder of the SAU. In its turn, the lower part of the SAU is rested on the foundation plate, mounted on the ground. A set of the SAU is a constructive realization of the SIS. Efficiency of such SIS has been proved as theoretically, so experimentally An effective SIS can also be created on the base of the elasto-plastic shock-absorbers developed by the KBSM. New designing and constructional solutions are based on the use of the original SIS elements, performed on the base of long time existing (in the other field of technical equipment)units, safety and durability of which have been proved by long term service (more than 20 years).
Die Modelle früher CAD-Zeichnungen sind unstrukturierte Mengen graphischer Elemente. Heute werden CAD-Zeichnungen aus semantischen Objektmodellen von Bauwerken abgeleitet, deren Informationsbasis systematisch geordnet und deren Nutzung zweckmäßig geregelt ist. Softwaremodule werden getrennt entwickelt und unter aktiver Mitwirkung der Anwender vereint eingesetzt.Ein zentrales Problem der aktuellen Forschung und Entwicklung im CAD ist die Handhabung der Beziehungen zwischen Objekten und ihrer Änderungen in verteilten Arbeitsumgebungen. Hierfür wird ein Konzept mit der Relationenalgebra als theoretische Grundlage vorgestellt.
There was suggested a phenomenological modified quadratic condition of the beginning of plasticity for plastic and quasifragile orthotropic materials. Limiting surface in the shape of a paraboloid with an axis bend over hydrostatic axis corresponds to the condition. The equations of theory of current with the isotropic and anisotropic hardenings, associated with the suggested yield condition, modified into the version of determining equations of strain theory of plasticity are received. These defining equations formed the basis of highlyprecise non-classic continual (along thickness) theory of non-linear deformation of thick sandwich plates and sloping shells. In the approximations along the cross coordinate the specificity of flexural and non-flexural deformations is taken into account. The necessity of introducing the approximations of higher order, as well as accounting for the cross compression while decreasing of the relatively cross normal and shear layer rigidness is shown. The specifications, obtained in comparison with the known physically nonlinear specified model of the bending of plates with orthotropic layers are distinguished. An effective procedure of linearization of the solving equations and getting the solutions in frames of the discrete-continual scheme of the finite-element method is suggested. The approximations of higher order let to model the appearance of the cracs of layers being split by the introducing of slightly hard thin layers into the finite element, not violating the idea of continuality of theory. Calculation of a threelayer plate with rigid face diaphragms on the contour is considered
In many engineering applications two or more different interacting systems require the numer-ical solution of so-called multifield problems. In civil engineering the interaction of fluid and structures plays an important role, i.e. for fabric tensile structures of light and flexible materials often used for large roof systems, capacious umbrellas or canopies. Whereas powerful numerical simulation techniques have been established in structural engineering as well as in fluid mechan-ics, only relatively few approaches to simulate the interaction of fluids with civil engineering constructions have been presented. To determine the wind loads on complex structures, it is still state-of-the-art to apply semi-empirical, strongly simplifying methods or to perform expensive ex-periments in wind tunnels. In this paper an approach of a coupled fluid-structure simulation will be presented for membrane and thin shell structures. The interaction is described by the struc-tural deformation as response to wind forces, resulting in a modification of the fluid flow domain. Besides a realistic determination of the wind loads, information on the structural stability can be obtained. The so-called partitioned solution is based on an iterative frame algorithm, integrating different codes for Computational Fluid Dynamics (CFD) and for Computational Structural Dy-namics (CSD) in an explicit or an implicit time-stepping procedure. All data exchange between the two different applications is performed via a neutral geometric model provided by a coupling interface. A conservative interpolation method is used for the interpolation of the nodal loads. The time-dependent motion of the structure requires a dynamic modification of the different grids and a redefinition of the Navier-Stokes equations in an Arbitrary Langrangian Eulerian (ALE) formulation. As an example for the present implementation, results of a coupled fluid-structure simulation for a textile membrane canopy will be presented.
Es wird das gemeine Schema der Projektierung, die die Analyse des Marktes einschließt, betrachtet, die Einschätzung der Nomenklatur und des Umfanges des Produktionsausstoßes der Erzeugnisse, und die Schlüsselaufgabe der Wahl der Regimes der Bearbeitung. Die letzte Aufgabe wird - konkretisiert es werden die Formeln berichtet und die Algorithmen der Optimierung nach den Kriterien der Produktivität und den Selbstkostenpreisen. Es sind die Formeln für die Produktivität der Systeme mit der flexiblen Verbindung, präzisiert sowie die Abhängigkeiten für die Standhaftigkeit bei den kleinen Geschwindigkeiten des Schneidens. Die Schlüsselwörter: der Markt, die Regimes der Bearbeitung, die Produktivität, der Selbstkostenpreis, die Optimierung
A fuzzy logic controller - WNC (Water Network Control) was developed for control of urban drainage systems. The objectives are to avoid accidents, flooding, pollutions through combined sewer overflows and excessive operation and maintenance costs. Fuzzy logic was proved to be a promising approach, flexible and easy accepted, because it includes the expert knowledge. Fuzzy control system proposed is robust and also easy to understand and modified. It offers to the operator the possibility to participate directly in the system control, combining the results of the modern optimization techniques with the experience and knowledge accumulated in time by experts. Thus, the control of urban sewer system can be well solved by implementing an intelligent control system, based on available information (fuzzy) and on expert's experience. An important feature of this fuzzy logic system is its capability to elaborate a control decision even in situations that were not considered in the design phase of the urban network.
Die Kooperation zwischen Menschen und Computern gewinnt in zahlreichen Problemstellungen mehr und mehr an Bedeutung. Ein wesentlicher Grund hierfür ist die ständig wachsende Komplexität relevanter Problemstellungen. Dadurch bedingt sind weder der Mensch noch der Computer alleine in der Lage, zufriedenstellende Lösungen zu entwickeln. Die Kombination der individuellen Fähigkeiten hat sich in vielen Bereichen als gewinnbringend erwiesen. Genetische Algorithmen (GA) als Repräsentanten der >Evolutionary Computation< stellen einen Ansatz zur Lösung hochkomplexer Optimierungsaufgaben dar, der sich an den Vorgängen der Evolution orientiert. Im Gegensatz zu vielen anderen Optimierungsverfahren bringen sie einige Eigenarten mit, die kooperative Erweiterungen einfach und erfolg-versprechend machen. Der vorgestellte kommunizierende Genetische Algorithmus kombiniert die Vorteile der GA mit der Fähigkeit zur Kooperation. Es gelingt bei seiner Verwendung, gute externe Vorschläge aufzunehmen, während schlechte Vorschläge keinerlei negative Auswirkungen zeigen. Diese Robustheit gegen Irrtümer und Fehleingaben macht den KGA zu einer idealen Basis für Programme zur kooperativen Problemlösung.
Während des Entwurfs- und Herstellungsprozesses eines architektonischen Objektes wird eine Menge organisatorischer, projektbezogener Daten zusammengetragen (z.B. Namen und Adressen von Bauherren, Firmen, Architekten, Ingenieuren, Behörden, die Art ihrer Beteiligung, Schriftverkehr). Diese Daten werden während dieses Prozesses mehrere Male verwendet, jedoch in unterschiedlichen Zusammenhängen, durch unterschiedliche Nutzer und von verschiedenen Anwendungen. Demzufolge ist eine geeignete Datenmodellierung und Datenverwaltung erforderlich, die diesen Aspekten gerecht wird. Der vorliegende Beitrag beschreibt ein Programm, welches die verschiedenen Formen der Projektdaten integriert, die Adreß-, Projekt- und Dokumentenverwaltung übernimmt, Projektinformationsdienstleistungen anbietet und Büroabläufe unterstützt.
Datenaustausch, Daten resp. Produktdatenmodelle sind seit mehreren Jahren Themen in der Forschung. Verschiedene Forschungsprojekte und Initiativen diverser Firmen führten zu bereichsübergreifenden Ansätzen wie IFC und verschiedenen STEP-AP´s. Speziell im Stahlbau sind die Projekte >Produktschnittstelle Stahlbau< und >CIMsteel< entwickelt, weiterentwickelt und überarbeitet worden. Als Weiterentwicklung der bisher existierenden Austauschformate versuchen neuere Ansätze den Nutzen über die reine Datenübermittlung hinaus zu erweitern. So integrieren diese Lösungsvorschläge Aspekte der Kommunikation, der Zusammenarbeit und des Managements. Des weiteren übernehmen sie Aufgaben der Daten- und Modellverwaltung. Somit erfolgt eine digitale Abbildung unter Einbezug sämtlicher ermittelter Daten. Resultierend aus den besonderen Randbedingungen im Bauwesen, wird ein Bauwerksmodell aus untereinander in Beziehung gesetzten Domänenmodellen aufgebaut
Die fachlichen Grundlagen der Aufgaben, die in einem Bauunternehmen zu bearbeiten sind, wurden in verschiedenen Disziplinen entwickelt. Maßgeblich waren der Baubetrieb und die Betriebswirtschaftslehre. Die parallele Entwicklung hat jedoch dazu geführt, dass grundlegende Begriff und Verfahren zwischen den Disziplinen nicht aufeinander abgestimmt sind. Die verschiedenen Aufgaben beeinflussen jedoch einander. Innerhalb der jeweiligen Disziplin wurden Informationssysteme entwickelt, mit denen sich die Aufgaben aus der jeweiligen Disziplin bearbeiten lassen. Zur Verbindung der "verschiedenen Welten" existieren zwar ausgewählte Schnittstellen, eine durchgängige verteilte Bearbeitung der verschiedenen Aufgaben wird jedoch noch nicht umfassend unterstützt. Im vorliegenden Beitrag wird ein Vorgehen vorgestellt, auf dessen Grundlage eine verteilte Bearbeitung der fachgebietsübergreifenden Aufgaben erfolgen kann. Das Vorgehen beruht auf der Modellierung der Prozesse sowie der zur Bearbeitung der als Bestandteil der Prozesse spezifizierten Aufgaben benötigten Informationen. Dieses Modell wird auf der Grundlage der Mengenlehre mit einem entsprechenden Werkzeug aufgebaut. Die Spezifikation der Informationen wird genutzt, um Datenbankschemata zu generieren, die Spezifikation der Aufgaben wird genutzt, um Werkzeuge zur Bearbeitung zu identifizieren. Diese Werkzeuge sind in Java als Applets implementiert und können über entsprechende Treiber auf die Datenbanken zugreifen. Das Prozessmodell wird in einem nächsten Schritt erweitert. Personen werden eingeführt. Diesen Personen werden Aufgaben zugewiesen, deren Bearbeitung sie ausführen sollen. Auf der Grundlage des erweiterten Prozessmodells werden die Applets, die eine Person benötigt, auf einer entsprechenden Internet-Seite zusammengestellt. Damit kann projektspezifisch ein Informationssystem zusammengestellt werden, das eine verteilte Bearbeitung der verschiedenartigen Aufgaben unterstützt.
Thin-walled spatial structures are broadly used in the modern technician and building. In fuel industry for long-term keeping of oil and gas are used reservoirs of various capacity, which on technological reasons can be shipped under the soil. Shells of reservoirs combine in itself high toughness and low specific consumption of materials. At the same time, being under the soil, they feel steady-state and dynamic loads from ambiance, which particularly in the event, when reservoir is empty, can bring about the loss of stability of its form. On the other hand contact interactions of shell and soil greatly depend on features of ambiance and its saturating of liquid. For building generalized porous springy ambiance models, saturated by the liquid, it is possible to use Bio equations of motion for displacement of hard and fluid phases. Elaboration of mathematical specified interaction models and theirs realization by means of modern computing software allows to study behaviour of spatial thin-walled designs on base of geometric nonlinear theory of shells
Im Zusammenhang mit der Revitalisierung von Plattenbauwerken kommt der Bewertung bzw. Neubewertung der vorhandenen Aussteifungssysteme große Bedeutung zu. Zur Aussteifung werden im allgemeinen raumbreite, raumhohe und meist unbewehrte Betonelemente verwendet, die lediglich konstruktiv miteinander verbunden sind. Im Rahmen der Untersuchung wird ein vorhandenes Berechnungsmodell zur physikalisch nichtlinearen Analyse von Aussteifungssystemen mehrgeschossiger Gebäude unter Horizontallast so erweitert, dass unbewehrte Horizontalfugen berücksichtigt werden können. Die Analyse der Aussteifungssysteme wird auf der Basis der Methode der mathematischen Optimierung realisiert, wobei die aussteifenden Wände als offene dünnwandige, schlanke Stäbe betrachtet werden, die über dehnstarre Deckenscheibe (Diaphragmen) gekoppelt sind. Im Beitrag wird gezeigt, dass sich bei Berücksichtigung des physikalisch nichtlinearen Tragverhaltens und der damit verbundenen Schnittgrößenumlagerungen Tragreserven erschließen lassen, die auf die Standsicherheit sowohl vorhandener als auch revitalisierter Gebäude angerechnet werden können.
One of the basic types of strength calculations is the calculation of limit equilibrium of constructions. This report describes new method for solving the problem of limit equilibrium. The rigid-plastic system in this method is substituted with an «equivalent» elastic system with specially constructed rigidities. This is why it is called the method of pseudorigidities. An iteration algorithm was developed for finding pseudorigidities. This algorithm is realized in a special software procedure. Conjunction of this procedure with any elastic calculation program (base program) creates a program solving rigid-plastic problems. It is proved, that iterations will be converge to the solution for the problem of limit equilibrium. The solution of tests show, that pseudorigidity method is universal. It allows the following: - to solve problems of limit equilibrium for various models (arch, beam, frame, plate, beam-wall, shell, solid); - to take into account both linearized and square-law fluidity conditions; - to solve problems for various kinds of loads (concentrated, distributed, given by a generalized vector); - to take into account the existing various of fluidity criteria in different sections etc. The iterative PRM process quickly converges. The accuracy of PRM is very high even in case of rough finite-element structuring. The author has used this method for design protection systems from extreme loads due to equipment of nuclear power stations, pipelines, cargo in any transportation.
Diskrete Arbeitsvorgänge lassen sich mit Hilfe von Petri--Netzen formal beschreiben. Petri--Netze basieren auf der Graphentheorie. Die Elemente zweier Knotenmengen werden Stellen und Transitionen genannt und sind durch gerichtete Kanten miteinander verknüpft. Stellen repräsentieren Bedingungen oder Zustände und Transitionen Ereignisse oder Vorgänge. Durch Petri--Netze ist es möglich nicht nur eine statische Vorgänger--Nachfolger--Struktur abzubilden, vielmehr können ebenso Ereignisse, Alternativen und Nebenläufigkeiten modelliert werden. In diesem Beitrag wird vorgestellt, wie ein Bauablauf gegeben durch ein Vorgangsknoten-Netzplan mit sehr wenigen Schritten auf ein Bedingungs/Ereignis-Netz abgebildet werden kann. Alle notwenigen Teilschritte wie das Bilden von Teilnetzen oder das Vergröbern und Verfeinern von Knoten basieren auf einem mathematisch abgesicherten Fundament. Im Gegensatz zu anderen Formulierungen von Bauabläufen ist die Theorie der Petri-Netze eine allgemeingültige Theorie und kann in vielen Bereichen eingesetzt werden. Die Verwendung einer solchen mathematischen Abstraktion ermöglicht die Wiederverwendung von bereits entwickelten Lösungsansätzen. So können die gewonnenen Erfahrungen auch bei der Modellie-rung von anderen Arbeitsvorgängen verwendet werden.
IT support for field personnel is starting to appear on bridge inspection sites, construction sites, and on the manufacturing floor. ENR magazine now regularly advertises palm computing-based systems for recording data on a construction site. This support can, and should, take on many forms and functions and needs to be carefully designed and evaluated like any other important tool used in the field. With careful design and implementation, IT devices for the field should have tremendous impact on the productivity of field personnel. If the devices are not carefully designed to take account of the field context and the abilities and preferences of the field personnel, field workers will not use these tools.
For analysis and planing of transport networks detailed information concerning travel sequences is required. The paper examines an activity chain model to determine stochastic travel demand which individual generates in order to participate in activity or sequence of activities over the day. The transition from one activity to another depends on the activity participation decision, which is made sequentially and is constrained in space and time. Activity chains derived from travel survey data are used as a base to develop a more realistic model than conventional discrete trip models. Probabilistic concepts and statistical procedures are used to estimate characteristics of travel demand such as the number of daily out-of-home activities and transition probability from one activity to another participated by homogeneous behavioural groups. In addition, the paper compares the model for two different sized towns.
Die Berücksichtigung stochastischer System- und Lastparameter bei der nach EC zulässigen Analyse des Tragwerksverhaltens unter Berücksichtigung globalen nichtlinearen Systemverhaltens sind notwendig, da dies ein anderes Sicherheitskonzept erfordert. Wird der plastische Grenzlastfaktor (PGLF), der die Ausnutzung der Systemkapazitäten bis zum Kollaps ermöglicht, zur Grenzzustandsbeurteilung herangezogen, wird dies besonders deutlich. Für das Modell eines ebenen Stahlbetontragwerks wird starr-ideal-plastisches Materialverhalten vorausgesetzt. Die Bestimmung des PGLFs für ein gegebenes Lastbild kann ausgehend von einem Extremalprinzip über die Lösung einer Optimierungsaufgabe erfolgen. Diese direkte Bestimmung des Kollapses bereitet aber bei der stochastischen Analyse Schwierigkeiten, da die zugehörigen Grenzzustandsgleichungen (GZG) nicht gutartig sind. Es wird die stochastische Methode des Multi-Modal Importance Sampling (MMIS) vorgeschlagen, die unter Berücksichtigung der Eigenschaften dieses mechanischen Modells die Versagenswahrscheinlichkeit bestimmt, d.h. das Verfahren nimmt auf die nur stückweise Stetigkeit GZG des speziellen Problems Rücksicht. Es setzt die zugehörige Grenzzustandsfunktion voraus. Die wesentlichen Bemessungspunkte werden durch Anwendung des Betaverfahrens gesucht und dann mit einem Importance-Sampling-Algorithmus mit multimodaler Sampling Dichte die Versagenswahrscheinlichkeit bestimmt . Das Verfahren sucht und berücksichtigt die wesentlichen Versagensbereiche des Problems mit vertretbarem Aufwand. Verbesserungen könnten sowohl bei den enthaltenen Such- und Iterationsalgorithmen als auch bei der Wahl der einzelnen Sampling-Dichten erzielt werden, was Gegenstand weiterer Untersuchungen ist.