Refine
Document Type
- Doctoral Thesis (494) (remove)
Institute
- Institut für Strukturmechanik (ISM) (56)
- Institut für Europäische Urbanistik (29)
- Promotionsstudiengang Kunst und Design-Freie Kunst-Medienkunst (Ph.D) (25)
- F. A. Finger-Institut für Baustoffkunde (FIB) (20)
- Professur Sozialwissenschaftliche Stadtforschung (16)
- Professur Baubetrieb und Bauverfahren (15)
- Professur Denkmalpflege und Baugeschichte (14)
- Professur Informatik im Bauwesen (12)
- Professur Informatik in der Architektur (12)
- Professur Bauchemie und Polymere Werkstoffe (11)
Keywords
- Architektur (25)
- Beton (21)
- Stadtplanung (18)
- Finite-Elemente-Methode (17)
- Optimierung (14)
- Stadtentwicklung (13)
- Denkmalpflege (12)
- Isogeometric Analysis (10)
- Kunst (10)
- Modellierung (10)
Organisation im soziotechnischen Gemenge - Mediale Umschichtungen durch die Einführung von SAP
(2017)
Der Alltag in Organisationen besteht vor allem aus den Medien und Technologien, mit denen die Koordination zwischen einzelnen Arbeitsabläufen hergestellt wird.
Diese ethnografische Studie begleitet den Prozess der Einführung eines SAP-Systems in einem mittelständischen Unternehmen und zeigt, wie das bestehende Geflecht aus Praktiken und Technologien eine Neuanordnung erfährt. Dabei tritt das komplexe soziotechnische Gemenge zutage, auf dem Koordination und Organisation beruhen. Es geht um Hardware, ebenso wie Software, um mechanische und elektronische Medien, um Papiere, Drucker, Akten, Interfaces und Tastaturen, aber auch um die jahrzehntelang eingespielten Routinen und das Erfahrungswissen der Angestellten.
In contemporary society, data representation is an important and essential part of many aspects of our daily lives. This thesis aims to contribute to our understanding on how people experience data and what role representational modality plays in the process of perception and interpretation. This research is grounded in phenomenology - I align my theoretical exploration to ideas and concepts from philosophical phenomenology, while also respecting the essence of a phenomenological approach in the choice and application of methods. Alongside offering a rich description of people’s experience of data representation, the key contributions I claim transcend four areas: theory, methods, design, and empirical findings. From a theoretical perspective, besides describing a phenomenology of human-data relations, I define, for the first time, multisensory data representation and establish a design space for the study of this class of representation. In relation to methodologies, I describe and deploy two methods to investigate different aspects of data experience. I blend the Repertory Grid technique with a focus group session and show how this adaption can be used to elicit rich design relevant insight. I also introduce the Elicitation Interview technique as a method for gathering detailed and precise accounts of human experience. Furthermore, I describe for the first time, how this technique can be used to elicit accounts of experience with data. My contribution to design relates to the creation of a series of bespoke data-driven artefacts, as well as describing an approach to design that I call Design Probes, which allows researchers to focus their enquiry on specific design features. To answer the research questions I set out in this thesis, I report on a series of empirical studies that used the aforementioned methods. The findings of these studies show, for instance, how certain representational modalities cause us to have heightened awareness of our body, some are more difficult to interpret than others, some rely heavily on instinct and each of them solicit us to reference external events during the process of interpretation. I conclude that a phenomenology of human-data relations show how representational modality affects the way we experience data, it also shows how this experience unfolds and it offers insight into particular moments such as the formation of meaning.
The thesis investigates at the computer aided simulation process for operational vibration analysis of complex coupled systems. As part of the internal methods project “Absolute Values” of the BMW Group, the thesis deals with the analysis of the structural dynamic interactions and excitation interactions. The overarching aim of the methods project is to predict the operational vibrations of engines.
Simulations are usually used to analyze technical aspects (e. g. operational vibrations, strength, ...) of single components in the industrial development. The boundary conditions of submodels are mostly based on experiences. So the interactions with neighboring components and systems are neglected. To get physically more realistic results but still efficient simulations, this work wants to support the engineer during the preprocessing phase by useful criteria.
At first suitable abstraction levels based on the existing literature are defined to identify structural dynamic interactions and excitation interactions of coupled systems. So it is possible to separate different effects of the coupled subsystems. On this basis, criteria are derived to assess the influence of interactions between the considered systems. These criteria can be used during the preprocessing phase and help the engineer to build up efficient models with respect to the interactions with neighboring systems. The method was developed by using several models with different complexity levels. Furthermore, the method is proved for the application in the industrial environment by using the example of a current combustion engine.
Ein aktuelles Thema in der Forschung der Betonindustrie ist die gezielte Steuerung des Erstarrens und der Entwicklung der (Früh)Festigkeit von Betonen und Mörteln. Aus ökonomischer Sicht sind außerdem die Reduktion der CO2-Emission und die Schonung von Ressourcen und Energie wichtige Forschungsschwerpunkte. Eine Möglichkeit zum Erreichen dieser Ziele ist es, die Reaktivität/Hydratation der silikatischen Klinkerphasen gezielt anzuregen. Neben den bereits bekannten Möglichkeiten der Hydratationsbeschleunigung (u.a. Wärmebehandlung, Zugabe von Salzen) bietet die Anwendung von Power-Ultraschall (PUS) eine weitere Alternative zur Beschleunigung der Zementhydratation. Da bis zum jetzigen Zeitpunkt noch keine Erfahrungen zum Einsatz von PUS in der Zementchemie vorliegen, sollen mit der vorliegenden Arbeit grundlegende Kenntnisse zum Einfluss von PUS auf das Fließ- und Erstarrungsverhalten von Zementsuspensionen erarbeitet werden.
Dazu wurde die Arbeit in fünf Hauptuntersuchungsabschnitte aufgeteilt.
Im ersten Teil wurden optimale PUS-Parameter wie Amplitude und Energieeintrag ermittelt, die eine effiziente Beschleunigung der Portlandzement(CEM I)hydratation bei kurzen Beschallzeiten und begrenzter Zementleimtemperaturerhöhung erlauben. Mit Hilfe unabhängiger Untersuchungsmethoden (Bestimmung des Erstarrungsbeginns, der Festigkeitsentwicklung, zerstörungsfreier Ultraschallprüfung, isothermer Wärmeflusskalorimetrie, hochauflösender Rasterelektronmikroskopie (REM) wurde die Wirkung von PUS auf den Hydratationsverlauf von CEM I-Suspensionen charakterisiert. Die Ergebnisse zeigen, dass die Behandlung von CEM I-Suspensionen mit PUS grundsätzlich ein beschleunigtes Erstarren und eine beschleunigte (Früh)Festigkeitsentwicklung hervorruft.
Anhand von REM-Untersuchungen konnte eindeutig nachgewiesen werden, dass die Beschleunigung der CEM I-Hydratation mit einer beschleunigten Hydratation der Hauptklinkerphase Alit korreliert. Auf Grundlage dieser Erkenntnisse wurden die Ursachen der Aktivierung der Alithydratation untersucht. Dazu wurden Untersuchungen an Einzelsystemen des CEM I (silikatische Klinkerphase) durchgeführt.
Es ist bekannt, das die Hydratation der Hauptklinkerphase Alit (in der reinen Form Tricalciumsilikat 3CaO*SiO2; C3S) durch Lösungs-/Fällungsreaktionen (Bildung von Calcium-Silikat-Hydrat Phasen, C-S-H Phasen) bestimmt wird. Mit Hilfe von Untersuchungen zur Auflösung (C3S) und Kristallbildung (C-S-H Phasen) in Lösungen und Suspensionen (Aufzeichnung der elektrischen Leitfähigkeit sowie Bestimmung der Ionenkonzentrationen der wässrigen Phase, REM-Charakterisierung der Präzipitate) wurde die Beeinflussung dieser durch eine PUS-Behandlung charakterisiert. Die Ergebnisse zeigen, dass in partikelfreien Lösungen (primäre Keimbildung) eine PUS-Behandlung keinen Einfluss auf die Kinetik der Kristallisation von C-S-H Phasen hervorruft. Das heißt, auch die durch PUS eingetragene Energie reicht offensichtlich nicht aus, um in Abwesenheit von Oberflächen die C-S-H Phasen Bildung zu beschleunigen. Das weist darauf hin, dass die Bildung von C-S-H Phasen nicht durch eine Beschleunigung von Ionen in der Lösung (erhöhte Diffusion durch Anwendung von PUS) hervorgerufen wird. Eine Beschleunigung des Kristallisationsprozesses (Keimbildung und Wachstum von C-S-H Phasen) durch PUS wird nur in Anwesenheit von Partikeln in der Lösung (Suspension) erzielt. Das belegen Ergebnisse, bei denen die Bildung erster C-S-H Phasen bei geringer Übersättigung (heterogene Keimbildung, in Anwesenheit von Oberflächen) erfolgt. Unter diesen Bedingungen konnte gezeigt werden, dass PUS innerhalb der ersten 30 Minuten der Hydratation eine erhöhte Fällung von ersten C-S-H Phasen bewirkt. Diese fungieren dann vermutlich während der Haupthydratation als Keim bzw. geeignete Oberfläche zum beschleunigten Aufwachsen von weiteren C-S-H Phasen. Weiterhin ist vorstellbar, dass (in Analogie zu anderen Bereichen der Sonochemie) PUS durch Kavitation Schockwellen hervorruft, welche Partikel und wässriges Medium beschleunigen und damit erhöhte Partikelbewegungen und -kollisionen induziert. Dies wiederum bewirkt, dass die anfänglich auf der C3S-Oberfläche gebildeten C-S-H Phasen teilweise wieder entfernt werden. Damit ist das Inlösunggehen von Ca- und Si-Ionen aus dem C3S weiterhin möglich. Um den genauen Mechanismus weiter zu charakterisieren sollten mit geeigneten Methoden weitere Untersuchungen durchgeführt werden.
Im zweiten Teil der Arbeit wurde der Einfluss von PUS auf das Fließverhalten von CEM I-Suspensionen untersucht. Aus der Anwendung von PUS in anderen technischen Bereichen sind unter anderem Effekte wie das Entlüften, das Homogenisieren und das Dispergieren von Suspensionen und Emulsionen mittels PUS bekannt. Mit Hilfe der Bestimmung des Luftporengehaltes, Sedimentationsversuchen und cryo-SEM Untersuchungen wurde der Einfluss von PUS auf CEM I-Suspensionen charakterisiert. Die Ergebnisse belegen, dass durch PUS eine verbesserte Homogenität und Dispergierung der CEM I-Suspension erzielt wird. Damit wird für CEM I-Suspensionen unterschiedlichster w/z-Werte eine verbesserte Fließfähigkeit festgestellt. Ergebnisse der Bestimmung von Ausbreitmaßen und Trichterauslaufzeiten zeigen, dass PUS einen direkten Einfluss vor allem auf die Viskosität der CEM I-Suspensionen besitzt. Werden Fließmitteln (FM) der CEM I-Suspension zugegeben, wird nicht in jedem Fall eine verbesserte Fließfähigkeit festgestellt. Hier scheint unter bestimmten Voraussetzungen (w/z-Wert, FM-Gehalt, PUS) die Reaktion zwischen Aluminat- und Sulfatphase des Klinkers gestört. Zur eindeutigen Klärung dieses Sachverhaltes bedarf es jedoch weiterer quantitativer Untersuchungen zum Reaktionsumsatz.
Im dritten Teil der Arbeit wurden die am CEM I gewonnenen Erkenntnisse zum Einfluss von PUS auf die Hydratation an Portland-Hüttensand(HÜS)-Zement-Systemen verifiziert. Dafür
wurden auch in diesem Teil der Arbeit zunächst die optimalen PUS-Parameter festgelegt und der Einfluss auf das Erstarrung- und Erhärtungsverhalten dokumentiert. Untersuchungsmethoden sind unter anderem die Bestimmung des Erstarrungsbeginns und der (Früh)Festigkeitsentwicklung, Temperaturaufzeichnungen und isothermale Wärmeflusskalorimetrie sowie REM. Die Ergebnisse zeigen, dass auch die Reaktion von HÜS-Zementen durch PUS beschleunigt wird. Weiterführende Untersuchungen belegen, dass die erzielte Beschleunigung vorwiegend auf der Beschleunigung der Alitkomponente des CEM I beruht.
Im Fokus der Teile vier und fünf dieser Arbeit stand die Anwendbarkeit der PUS-Technik unter praktischen Bedingungen. Zum einen wurde die Anwendbarkeit von PUS in fertig gemischten Mörteln beurteilt. Anhand des Vergleichs wichtiger Frisch- und Festmörteleigenschaften unterschiedlich hergestellter Mörtel (beschallt im Anschluss an konventionelle Mischtechnik, beschallt im Anschluss an Suspensionsmischtechnik mit anschließender Zumischung der Gesteinskörnung und nicht beschallt) wird gezeigt, dass im Fall von Mörteln mit hohem Leimanteil eine durch PUS induzierte beschleunigte Festigkeitsentwicklung auch mit herkömmlichen Mischabläufen (ohne aufwendige Umstellung des Mischprozesses) möglich ist.
Abschließend wird untersucht, ob der Herstellungsprozess von Wandbauteilen im Fertigteilwerk durch den Einsatz von PUS optimiert werden kann und ob eine Einbindung der PUS-Technik in den Fertigungsprozess ohne größeren Aufwand möglich ist. Dazu wurden in einem ersten Schritt die Frisch- und Festbetoneigenschaften eines aktuell angewendeten selbstverdichtenden Betons im Labormaßstab (Mörtel) in Abhängigkeit einer PUS-Behandlung dokumentiert und mit der seiner unbeschallten Referenz verglichen. Aufgrund der durch PUS verursachten verbesserten Fließ- und Festigkeitseigenschaften kann die beschallte Mörtelrezeptur hinsichtlich Fließmittelgehalt und Dauer der Wärmebehandlung optimiert werden. Somit werden ca. 30 % der Fließmittelzugabe und 40 % der Dauer der Wärmebehandlung eigespart. Eine Einbindung der PUS-Technik in das betrachtete Fertigteilwerk ist nach Überprüfung der konstruktiven Gegebenheiten der Fertigungsstrukturen ohne größeren Aufwand möglich.
The gradual digitization in the architecture, engineering, and construction industry over the past fifty years led to an extremely heterogeneous software environment, which today is embodied by the multitude of different digital tools and proprietary data formats used by the many specialists contributing to the design process in a construction project. Though these projects become increasingly complex, the demands on financial efficiency and the completion within a tight schedule grow at the same time. The digital collaboration of project partners has been identified as one key issue in successfully dealing with these challenges. Yet currently, the numerous software applications and their respective individual views on the design process severely impede that collaboration.
An approach to establish a unified basis for the digital collaboration, regardless of the existing software heterogeneity, is a comprehensive digital building model contributed to by all projects partners. This type of data management known as building information modeling (BIM) has many benefits, yet its adoption is associated with many difficulties and thus, proceeds only slowly. One aspect in the field of conflicting requirements on such a digital model is the cooperation of architects and structural engineers. Traditionally, these two disciplines use different abstractions of reality for their models that in consequence lead to incompatible digital representations thereof.
The onset of isogeometric analysis (IGA) promised to ease the discrepancy in design and analysis model representations. Yet, that initial focus quickly shifted towards using these methods as a more powerful basis for numerical simulations. Furthermore, the isogeometric representation alone is not capable of solving the model abstraction problem. It is thus the intention of this work to contribute to an improved digital collaboration of architects and engineers by exploring an integrated analysis approach on the basis of an unified digital model and solid geometry expressed by splines. In the course of this work, an analysis framework is developed that utilizes such models to automatically conduct numerical simulations commonly required in construction projects. In essence, this allows to retrieve structural analysis results from BIM models in a fast and simple manner, thereby facilitating rapid design iterations and profound design feedback.
The BIM implementation Industry Foundation Classes (IFC) is reviewed with regard to its capabilities of representing the unified model. The current IFC schema strongly supports the use of redundant model data, a major pitfall in digital collaboration. Additionally, it does not allow to describe the geometry by volumetric splines. As the pursued approach builds upon a unique model for both, architectural and structural design, and furthermore requires solid geometry, necessary schema modifications are suggested.
Structural entities are modeled by volumetric NURBS patches, each of which constitutes an individual subdomain that, with regard to the analysis, is incompatible with the remaining full model. The resulting consequences for numerical simulation are elaborated in this work. The individual subdomains have to be weakly coupled, for which the mortar method is used. Different approaches to discretize the interface traction fields are implemented and their respective impact on the analysis results is evaluated. All necessary coupling conditions are automatically derived from the related geometry model.
The weak coupling procedure leads to a linear system of equations in saddle point form, which, owed to the volumetric modeling, is large in size and, the associated coefficient matrix has, due to the use of higher degree basis functions, a high bandwidth. The peculiarities of the system require adapted solution methods that generally cause higher numerical costs than the standard procedures for symmetric, positive-definite systems do. Different methods to solve the specific system are investigated and an efficient parallel algorithm is finally proposed.
When the structural analysis model is derived from the unified model in the BIM data, it does in general initially not meet the requirements on the discretization that are necessary to obtain sufficiently accurate analysis results. The consequently necessary patch refinements must be controlled automatically to allowfor an entirely automatic analysis procedure. For that purpose, an empirical refinement scheme based on the geometrical and possibly mechanical properties of the specific entities is proposed. The level of refinement may be selectively manipulated by the structural engineer in charge. Furthermore, a Zienkiewicz-Zhu type error estimator is adapted for the use with isogeometric analysis results. It is shown that also this estimator can be used to steer an adaptive refinement procedure.
In der Arbeit wurde eine Methode für eine kulturübergreifende Vergleichsstudie zwischen China und dem Westen erarbeitet. Diese Methode ermöglicht Unternehmensentwicklung in China aus dem eignen historischen Zusammenhang zu verstehen, statt nur aus einem rein theoretischen Blickwinkel. Weil heutige wissenschaftliche Theorien meist aus der westlichen Kultur stammen und mit Wertvorstellungen sowie mit Begriffen aus dem westlichen Kulturkreis verbunden sind, müssen sie im historischen Kontext des westlichen Kulturkreises betrachtet werden.
Im ersten Teil der Arbeit wird der westliche moderne Staat als Untersuchungsbegriff herangezogen, seine Entstehungsbedingungen und seine Verwendungsart und -weise, besonders wie er die ökonomische Theorie und die Praxis im Westen beeinflusst, dabei spielt das moderne Staatsprinzip eine wichtige Rolle. Die Neue Institutionenökonomik dient als theoretischer Referenzrahmen für diese Arbeit. Mittels einer theoretischen Erweiterung mit dem westlichen modernen Staatsverständnis werden wichtige westliche konstitutionelle Institutionen analysiert, da sie die Handlungsrechte und -pflichten der Bürger sowie die Bildung der kapitalistischen Unternehmung beeinflussen.
Im zweiten Teil der Arbeit wird das chinesische Staatsverständnis analysiert – vom traditionellen „Tianxia“ zum „modernen“ Staat. Mithilfe abgeleiteter Kriterien wird die chinesische Unternehmensentwicklung in drei zeitlichen Querschnittsphasen betrachtet, wie sich chinesische Unternehmen vom traditionellen bis zum „modernen“ entwickelten. Als Fallbeispiel werden chinesische Buchdruckunternehmen herangezogen. Zuerst wird das Buchdrucksystem sowie seine Veränderungen in drei Zeitphase betrachtet. Dabei wird auf die Aspekte Buchdruckorganisation, staatliche Verwaltung, wie Zensur und Urheberrecht sowie Lehrmaterial fokussiert, die für die Buchdruckunternehmensentwicklung von Bedeutung sind und ein System darstellen. Aus Mikrosicht werden drei Buchdruckunternehmen in den Zeitphasen analysiert. Im Ergebnis der Arbeit werden Schlussfolgerungen abgeleitet, bspw. dass Modernisierung als Aktualisierung verstanden werden sollte, aber nicht als Zerstörung.
This thesis suggests cooperation as a design paradigm for human-computer interaction. The basic idea is that the synergistic co-operation of interfaces through concurrent user activities enables increased interaction fluency and expressiveness. This applies to bimanual interaction and multi-finger input, e.g., touch typing, as well as the collaboration of multiple users. Cooperative user interfaces offer more interaction
flexibility and expressivity for single and multiple users.
Part I of this thesis analyzes the state of the art in user interface design. It explores limitations of common approaches and reveals the crucial role of cooperative action in several established user interfaces and research prototypes. A review of related research in psychology and human-computer interaction offers insights to the cognitive, behavioral, and ergonomic foundations of cooperative user interfaces. Moreover, this thesis suggests a broad applicability of generic cooperation patterns and contributes three high-level design principles.
Part II presents three experiments towards cooperative user interfaces in detail. A study on desktop-based 3D input devices, explores fundamental benefits of cooperative bimanual input and the impact of interface design on bimanual cooperative behavior. A novel interaction technique for multitouch devices is presented that follows the paradigm of cooperative user interfaces and demonstrates advantages over the status quo. Finally, this thesis introduces a fundamentally new display technology that provides up to six users with their individual perspectives of a shared 3D environment. The system creates new possibilities for the cooperative interaction of
multiple users.
Part III of this thesis builds on the research results described in Part II, in particular, the multi-user 3D display system. A series of case studies in the field of collaborative virtual reality provides exemplary evidence for the relevance and applicability of the suggested design principles.
In meiner theoretisch_praktischen Arbeit befasse ich mich mit der verletzenden Kraft von Sprache jenseits direkter Adressierung.
Es wird der Frage nachgegangen, ob und wie auch da Verletzung durch Sprache stattfindet, wo keine offensichtliche Diskriminierung erfolgt, sondern subtilere Wirkmächte der Performativität am Werk sind. Sprachliche Benenn- und Beweisbarkeit verletzenden Sprechens werden dabei in Frage gestellt und einem Wahrnehmen und Begegnen Vorrang gegeben.
Sowohl im eher theoretischen Teil, dem „Fragment I: 943 Fragen zur sprachlichen Gewalt“, als auch im vorwiegend praktischen Teil, dem „Fragment II: Untersuchungen und Zwischennutzungen“, wird eine Perspektive auf kritische Handlungsfähigkeit in Bezug auf Sprache und Gewalt eröffnet. Es wird ein Verständnis von Verantwortung als ein Affekt und zugleich Ort der Kritik zur Diskussion gestellt und befragt. Dabei versuche ich, über die dichotome Verfestigung von „Wir und die Anderen“ hinauszugelangen und dabei ein WIR, das nicht vom IHR getrennt ist, als WIHR in den Blick zu nehmen. Dieses WIHR muss notwendigerweise offen und flexibel bleiben. Es soll eine Art Möglichkeitsraum schaffen, der nicht neu geordnet, sondern im beständigen Fragen einer abschließenden Antwort entzogen wird.
Eine Annäherung in vor allem zeichnerischen und auditiven Untersuchungen sowie 943 Fragen.
Piezoelectric materials are used in several applications as sensors and actuators where they experience high stress and electric field concentrations as a result of which they may fail due to fracture. Though there are many analytical and experimental works on piezoelectric fracture mechanics. There are very few studies about damage detection, which is an interesting way to prevent the failure of these ceramics.
An iterative method to treat the inverse problem of detecting cracks and voids in piezoelectric structures is proposed. Extended finite element method (XFEM) is employed for solving the inverse problem as it allows the use of a single regular mesh for large number of iterations with different flaw geometries.
Firstly, minimization of cost function is performed by Multilevel Coordinate Search (MCS) method. The XFEM-MCS methodology is applied to two dimensional electromechanical problems where flaws considered are straight cracks and elliptical voids. Then a numerical method based on combination of classical shape derivative and level set method for front propagation used in structural optimization is utilized to minimize the cost function. The results obtained show that the XFEM-level set methodology is effectively able to determine the number of voids in a piezoelectric structure and its corresponding locations.
The XFEM-level set methodology is improved to solve the inverse problem of detecting inclusion interfaces in a piezoelectric structure. The material interfaces are implicitly represented by level sets which are identified by applying regularisation using total variation penalty terms. The formulation is presented for three dimensional structures and inclusions made of different materials are detected by using multiple level sets. The results obtained prove that the iterative procedure proposed can determine the location and approximate shape of material subdomains in the presence of higher noise levels.
Piezoelectric nanostructures exhibit size dependent properties because of surface elasticity and surface piezoelectricity. Initially a study to understand the influence of surface elasticity on optimization of nano elastic beams is performed. The boundary of the nano structure is implicitly represented by a level set function, which is considered as the design variable in the optimization process. Two objective functions, minimizing the total potential energy of a nanostructure subjected to a material volume constraint and minimizing the least square error compared to a target
displacement, are chosen for the numerical examples. The numerical examples demonstrate the importance of size and aspect ratio in determining how surface effects impact the optimized topology of nanobeams.
Finally a conventional cantilever energy harvester with a piezoelectric nano layer is analysed. The presence of surface piezoelectricity in nano beams and nano plates leads to increase in electromechanical coupling coefficient. Topology optimization of these piezoelectric structures in an energy harvesting device to further increase energy conversion using appropriately modified XFEM-level set algorithm is performed .
Briefly, the two basic questions that this research is supposed to answer are:
1. Howmuch fiber is needed and how fibers should be distributed through a fiber reinforced composite (FRC) structure in order to obtain the optimal and reliable structural response?
2. How do uncertainties influence the optimization results and reliability of the structure?
Giving answer to the above questions a double stage sequential optimization algorithm for finding the optimal content of short fiber reinforcements and their distribution in the composite structure, considering uncertain design parameters, is presented. In the first stage, the optimal amount of short fibers in a FRC structure with uniformly distributed fibers is conducted in the framework of a Reliability Based Design Optimization (RBDO) problem. Presented model considers material, structural and modeling uncertainties. In the second stage, the fiber distribution optimization (with the aim to further increase in structural reliability) is performed by defining a fiber distribution function through a Non-Uniform Rational BSpline (NURBS) surface. The advantages of using the NURBS surface as a fiber distribution function include: using the same data set for the optimization and analysis; high convergence rate due to the smoothness of the NURBS; mesh independency of the optimal layout; no need for any post processing technique and its non-heuristic nature. The output of stage 1 (the optimal fiber content for homogeneously distributed fibers) is considered as the input of stage 2. The output of stage 2 is the Reliability Index (b ) of the structure with the optimal fiber content and distribution.
First order reliability method (in order to approximate the limit state function) as well as different material models including Rule of Mixtures, Mori-Tanaka, energy-based approach and stochastic multi-scales are implemented in different examples. The proposed combined model is able to capture the role of available uncertainties in FRC structures through a computationally efficient algorithm using all sequential, NURBS and sensitivity based techniques. The methodology is successfully implemented for interfacial shear stress optimization in sandwich beams and also for optimization of the internal cooling channels in a ceramic matrix composite.
Finally, after some changes and modifications by combining Isogeometric Analysis, level set and point wise density mapping techniques, the computational framework is extended for topology optimization of piezoelectric / flexoelectric materials.
Die vorliegende Arbeit untersucht das Potential von Webanwendungen in 3D zur Vermittlung von Informationen im Allgemeinen und zur Darstellung von städtebaulichen Zusammenhängen im Speziellen.
Als grundlegender Faktor der visuellen und funktionalen Qualität - welche die Wahrnehmung des Nutzers direkt beeinflusst -, erfolgt die Bewertung der Machbarkeit von 3D Webinhalten unter Anwendung einer explorativen, qualitativen Evaluierung von Webagenturen.
Darauf aufbauend wird das Potential von 3D Webanwendungen aus Nutzerperspektive untersucht, um Zusammenhänge herstellen zu können: einerseits zwischen der Machbarkeit bei der Entwicklung und anderseits die Akzeptanzkriterien beim Rezipienten betreffend.
Die empirische Studie, die mit dem Forschungspartner Bosch für diese Arbeit modelliert wurde, eruiert zum einen, inwiefern 3D im Vergleich zu 2D und 2,5D, und zum anderen WebGL im Vergleich zu bisherigen 3D Webtechnologien die visuelle Wahrnehmung und kognitive Leistungsfähigkeit des Nutzers beeinflusst.
Die Erkenntnisse der Untersuchung zeigen Parallelen zu bestehenden Studien aus web-fernen Bereichen.
Um die Bedeutung von 3D Webanwendungen zur Verbesserung von Entscheidungsprozessen in Stadtplanungsprojekten ableiten zu können, werden Aspekte zur Interaktion und visuellen Wahrnehmung in den speziellen Kontext von Stadtplanungswerkzeugen gebracht. Dabei wird überprüft, ob sich web-basierte 3D Visualisierungen sinnvoll zur Vermittlung städtebaulicher Zusammenhänge einbinden lassen und inwieweit bestehende Projekte, wie in dieser Arbeit beispielhaft das vom Fraunhofer IGD entwickelte Forschungsprojekt urbanAPI, die Technologie WebGL nutzen können.
Vor diesem Hintergrund soll die Arbeit Akzeptanzkriterien und Nutzungsbarrieren von 3D Webanwendungen auf Basis der Technologie WebGL identifizieren, um einen Beitrag zur Machbarkeit von Webanwendungen und zur Entwicklung entsprechender Stadtplanungswerkzeuge zu leisten.
A parametric method for building design optimization based on Life Cycle Assessment - Appendix
(2016)
The building sector is responsible for a large share of human environmental impacts, over which architects and planners have a major influence. The main objective of this thesis is to develop a method for environmental building design optimization based on Life Cycle Assessment (LCA) that is applicable as part of the design process. The research approach includes a thorough analysis of LCA for buildings in relation to the architectural design stages and the establishment of a requirement catalogue. The key concept of the novel method called Parametric Life Cycle Assessment(PLCA) is to combine LCA with parametric design. The application of this method to three examples shows that building designs can be optimized time-efficiently and holistically from the beginning of the most influential early design stages, an achievement which has not been possible until now.
In this study, the behavior of a widely graded soil prone to suffusion and necessity of homogeneity quantifi cation for such a soil in internal stability considerations are discussed. With the help of suffusion tests, the dependency of the particle washout to homogeneity of sample is shown. The validity of the great infl uence of homogeneity on suffusion processes by the presentation of arguments and evidences are established. It is emphasized that the internal stability of a widely graded soil cannot be directly correlated to the common geotechnical parameters such as dry density or permeability. The initiation and propagation of the suffusion processes are clearly a particle scale phenomenon, so the homogeneity of particle assemblies (micro-scale) has a decisive effect on particle rearrangement and washout processes. It is addressed that the guidelines for assessing internal stability lack a fundamental, scientifi c basis for quantifi cation of homogeneity. The observation of the segregation processes within the sample in an ascending layered order (for downwards fl ow) inspired the author to propose a new packing model for granular materials which are prone to internally instability.
It is shown that the particle arrangement, especially the arrangement of soil skeleton particles or the so-called primary fabric has the main role in suffusiv processes. Therefore, an experimental approach for identifi cation of the skeleton in the soil matrix is proposed. 3D models of Sequential Fill Tests using Discrete Element Method (DEM) and 3D models of granular packings for relative, stochastically and ideal homogeneous particle assemblies were generated, and simulations have been carried out.
Based on the numerical investigations and in dependency on the soil skeleton behavior, an approach for measurement of relevant scale, the so-called Representative Elementary Volume (REV) for homogeneity investigation is proposed. The development of a new testing method for quantifi cation of homogeneity is introduced (in-situ). An approach for quantifi cation of homogeneity in numerically or experimentally generated packings (samples) based on image processing method of MATLAB has been introduced. A generalized experimental method for assessment of internal stability for widely graded soils with dominant coarse matrix is developed, and a new suffusion criterion based on ideal homogeneous internally stable granular packing is designed.
My research emphasizes that in a widely graded soils with dominant coarse matrix, the soil fractions with diameters bigger than D60 build essentially the soil skeleton. The mass and spatial distribution of these fractions governs the internal stability, and the mass and distribution of the fi ll fractions are a secondary matter. For such a soil, the homogeneity of the skeleton must be cautiously measured and verified.
Die vorliegende Arbeit beschäftigt sich mit dem Thema Stadthotels in Deutschland zwischen Energieeffizienz und Wirtschaftlichkeit - Studie auf Grundlagen der EnEV-Anforderungen. Die Arbeit setzt sich mit einer qualitativen und quantitativen Analyse über die Energieeffizienz auf Grundlagen der EnEV-Anforderungen und deren Wirtschaftlichkeit bei Stadthotels in Deutschland auseinander. Die Analyse wurde anhand von verschiedenen Untersuchungen bei Hotels aufgebaut. Diese umfassen empirische, energetische und wirtschaftliche Untersuchungen. Die durchgeführten Untersuchungen kommen schließlich zu eindeutigen Ergebnissen auf verschiedenen Ebenen. Im Ergebnis wird deutlich, dass die Optimierung der Gebäudetechnik sowie auch die Verbesserung der energetischen Qualität der Gebäudehülle der Hotels bedeutende Einflussfaktoren zur Steigerung der Energieeffizienz darstellen. Dabei ist jedoch festzuhalten, dass sich die Optimierung der Gebäudetechnik der Hotels insbesondere im Bereich der Lüftungs- und Klimatechnik als besonders wirksam erwiesen hat. Die Effektivität dieser Maßnahmen konnte sowohl in Hinsicht auf die Steigerung der Energieeffizienz als auch in Bezug auf die Wirtschaftlichkeit bewiesen werden.
Die Dissertation über „Ambiguität im zeitgenössischen Film – Flugversuche“ folgt der Spur einer populären narrativen Tendenz im Kino – nämlich der Mehrdeutigkeit – und zeichnet ihr dramaturgisches Potential, wie ihre ethischen (bzw. mikropolitischen) Implikationen nach. Um typische Muster in der Wahrnehmung mehrdeutiger Filmerzählungen zu beschreiben, die bereits auf der vorbewussten Ebene der Affekte wirksam sind, greife ich auf Begriffe der Prozessphilosophie Alfred North Whitehead’s zurück und auf ihre neueren Reformulierungen bei Gilles Deleuze und Brian Massumi. Ausgehend von Alejandro González Iñárritu’s "Babel" (2006) begibt sich der Leser im ersten Teil auf einen virtuellen Rundflug durch ausgewählte Filmbeispiele mit einem kulturellen Ankerpunkt im heutigen Japan. Im zweiten Teil beschreibe und reflektiere ich mein methodisches Vorgehen in den ersten Phasen der Stoffentwicklung zu einem suggestiven Spielfilmprojekt, und kontextualisiere es mit Interviews zeitgenössischer Autorenfilmer, die ähnliche Erzählweisen entwickeln.
The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME)
shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes
near the crack such as blending or shifting.
As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation.
In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected
pipes.
Problem definition and research objectives
1. The production of Portland cement clinker causes approx. 5% to 8% of the annual man-made CO2 emissions. This is due to the usage of mainly fossil fuel (approx. 40 % of the total CO2) and because of the decarbonation of limestone as a main component of the raw meal (approx. 60 % of the total CO2).
2. Various strategies are applied in order to reduce the green-house gas-emissions, such as optimizing the process of clinker production, the use of alternative fuel and the partial substitution of the clinker in blended cement by so-called SCM (supplementary cementitious materials). Hereby blast-furnace slag, fly ash and limestone are the most used materials.
3. Quaternary systems containing three SCM simultaneously besides Portland cement contribute to the reduction of CO2 emissions due to the decrease of the clinker content. In addition, such systems allow to use blast-furnace slag and fly ash in the most economical way and provide the possibility to account for shortages of SCM on the market.
4. Blast-furnace slag and fly ash show similarities in their principal chemical compositions such that similar hydrates are formed during their reaction in presence of Portland cement. Compared to ternary systems based on blast-furnace slag or fly ash besides limestone, quaternary systems that contain both, blast-furnace slag and fly ash, simultaneously besides limestone, are expected to perform similar in terms of phase assemblage and strength development.
5. The use of SCM as cement replacing materials is limited due to their generally slower reaction compared to neat cement which also leads to lower strength development, especially in the early stage of the hydration up to 28 d. To account for this it is necessary to study the reactivity of SCM such as blast-furnace slag and fly ash in detail in order to develop strategies to enhance the reactivity and thereby the strength development of SCM-containing systems.
6. The early hydration of clinker phases is studied in detail, mainly in diluted systems. It is unclear if processes that were found to control the reaction of such model systems are also prevailing in concentrated cement pastes under realistic water-to-solid ratios. Deeper insight to this aspect is needed to better understand interactions of neat Portland cement and SCM in the first hours of hydration.
State-of-the-art
7. Increasing Ca-concentrations lead to decreasing dissolution rates of C3S and C2S in diluted systems.
8. The hydration kinetics of C3S is controlled by the interplay of undersaturation with respect to C3S and oversaturation with respect to C-S-H.
9. Increasing Al-concentrations lead to a retardation of the hydration of C3S. It is unclear if the uptake of aluminum in C-S-H to form C-(A)-S-H which has a significantly lower growth rate than pure C-S-H or a retarding effect of Al on the dissolution of C3S causes this phenomenon.
10. The surface of limestone provides excellent conditions for the nucleation and growth of C-S-H such that significantly more C-S-H nuclei are formed in presence of limestone compared to other SCM.
11. The reactivity of blast-furnace slag and fly ash depends on the particle size as well as on the intrinsic reactivity of especially the amorphous phases.
12. An increase in network modifying oxides (e.g. CaO) in the chemical composition of amorphous (calcium)aluminosilicates leads to an increasingly depolymerized network which in turn causes increasing reactivity. The role of amphoteric oxides (Al2O3, Fe2O3) that can be present as network modifying oxides as well as network forming oxides is not completely solved.
13. CO2-containing AFm-phases are thermodynamically more stable than monosulfoaluminate. This indirectly stabilizes the voluminous ettringite which causes a higher total volume of hydrates and lower porosity whereby higher compressive strength is reached.
14. Only a few percent of limestone in blended cement reacts chemically dependent on the Al2O3 available for reaction. Al2O3 that is provided by the reaction of Portland cement but also by the dissolution of SCM, especially by fly ash, reacts to form hemicarboaluminate which is transformed to monocarboaluminate as the hydration proceeds.
Methodology
15. The influence of SCM on the early hydration of Portland cement in binary (including blast-furnace slag or fly ash or limestone or quartz) and ternary (including fly ash and limestone) systems was investigated applying isothermal calorimetry and analysis of the pore solution chemistry. Calculated saturation indices and solubility products of relevant phases were correlated with heat development. Based on the gained data it was reviewed if mechanisms that control the hydration of pure phases in diluted systems are also prevailing in cement pastes under realistic conditions.
16. The influence of the chemical composition of synthetic glasses on their dissolution at high pH was investigated in highly diluted systems using ion chromatography. Pozzolanity tests were conducted on pastes using simplified model systems and glass-blended Portland cements. The process of the glass dissolution was investigated by isothermal calorimetry and by thermogravimetry. Correlation of experimentally determined total bound water with bound water determined by mass balance calculations as a function of amount of glass reacted allowed to estimate the degree of glass reaction in the pastes. Further on selective dissolution experiments were carried out to crosscheck the results of the bound water/mass balance approach.
17. The reaction kinetics of quaternary pastes containing blast-furnace slag and fly ash simultaneously in the presence of limestone were investigated up to 28 d using isothermal calorimetry and chemical shrinkage measurements. In addition strength tests on mortar bars were carried out.
18. Pastes of quaternary blends were also investigated in terms of hydrate assemblage at ages of up to 182 d. Thermodynamic calculations regarding total volume of hydrates as a function of limestone and fly ash/blast-furnace slag content were conducted. The calculations were supported by thermogravimetric determination of bound water and portlandite content as well as qualitative X-ray diffraction. The results were correlated with strength tests on mortar bars.
19. The pore solutions of hydrated quaternary blends were extracted and investigated by means of ion chromatography at ages of up to 728 d. Based on the ion concentrations in the solutions saturation indices were calculated for relevant phases. In order to gain better insight to the blast-furnace slag reaction sulphate speciation was carried out at two blast furnace slag levels (20 and 30 wt.%) for selected samples up to 91 d of hydration and at 91 d for the whole matrix under investigation.
Main results
20. Investigations on the early hydration kinetics of binary systems showed a higher heat flow in presence of SCM compared to neat Portland cement. This is caused by the higher surface area that is available for the nucleation of hydrates and by the lower (over)saturation with respect to C-S-H. An increase in the Ca-concentration in the pore solution did not cause lower dissolution rates of C3S as was reported for pure phases in diluted systems. The highest dissolution was observed in the presence of limestone, i.e. at the highest Ca-concentration. The general trend of the reaction rate is inversely related to the degree of undersaturation with respect to C3S. The more undersaturated the faster the observed reaction. The presence of increasing Al-concentrations caused a retardation of the reaction which is in line with investigations on pure phases in diluted systems. Higher sulphate concentrations could be detected for the fly ash containing blend which possibly hindered ettringite precipitation and results in higher Al-concentrations. Correspondingly the low sulphate concentrations lead to lower Al-concentrations in the presence of quartz, blast-furnace slag and limestone compared to fly ash.
21. The early hydration kinetics of quaternary systems is significantly accelerated in the presence of limestone while fly ash leads to retardation. Compared to reference systems containing inert quartz, investigations by means of isothermal calorimetry and chemical shrinkage revealed an acceleration caused by blast-furnace slag. Additions of fly ash, limestone or mixtures thereof introduced another acceleration but differences are too small to be significant and clear distinguishing between the various SCM is not possible.
22. Investigations on the reactivity of synthetic glasses showed that increasing amounts of network modifying oxides caused an increase in reactivity and dissolution rates. The results reveal that Al2O3 acts mainly as network modifying oxide in all investigated glasses. Experimentally determined bound water (thermogravimetric experiments) in model systems and blended cements can be compared with bound water determined by mass balance calculations carried out as a function of the amount of glass reacted. This enables to estimate the degree of glass reaction.
23. The actual content of blast-furnace slag, fly ash or limestone does not exert significant influence on the development of compressive strength up to 7 d. At later ages thermodynamic calculations predict a degree of CaCO3 reaction of 2 to 5 wt.%. This leads to the formation of hemicarbonate and monocarbonate whereby ettringite is indirectly stabilized. As a result the total amount of solids is increased and compressive strength shows a slight maximum. Hereby the degree of CaCO3 reaction depends on the Al2O3 available for reaction which is not only provided by the dissolution of Portland cement but especially by the dissolution of the fly ash.
24. In general the presence of blast-furnace slag and fly ash in the presence of limestone exerts little influence on the hydrate assemblage. The substitution of some of the blast-furnace slag by fly ash leads to a slight decrease of portlandite and C-S-H and gives rise to the formation of more monocarbonate and hemicarbonate. Portlandite is consumed in a pozzolanic reaction with the fly ash whereby C-S-H is formed. However, the low reactivity of the fly ash causes a decrease in the amount of C-S-H formed. Thereby a lower total volume of hydrates is generated which is in line with slightly lower compressive strength in case of increasing fly ash content. The overall influence is small and all systems investigated reach strength class 42.5 N according to EN 196-1.
25. Corresponding to the investigations of the hydrate assemblage the pore solution chemistry of quaternary systems showed only small variations. Depending on the fly ash content the highest variations are observed for aluminium, i.e. increasing fly ash content leads to higher Al-concentrations. Another effect of increasing fly ash contents is an increasing undersaturation with respect to portlandite and a decreasing undersaturation with respect to strätlingite indicating the dissolution of portlandite.
26. The total concentration of sulfur in the pore solution is controlled by sulphate (SO42–) while the concentrations of sulphite (SO32–) and thiosulphate (S2O32–) were very low. Up to 2 d of hydration about 90 % of the total sulphur is present as SO42–. After 91 d this value is reduced to about 36 % while about 28 % are present as S2O32–. In general higher blast-furnace slag content leads to higher concentrations of sulphite and thiosulphate after 7 d.
Das Erzeugen räumlicher Konfigurationen ist eine zentrale Aufgabe im architektonischen bzw. städtebaulichen Entwurfsprozess und hat zum Ziel, eine für Menschen angenehme Umwelt zu schaffen. Der Geometrie der entstehenden Räume kommt hierbei eine zentrale Rolle zu, da sie einen großen Einfluss auf das Empfinden und Verhalten der Menschen ausübt und nur noch mit großem Aufwand verändert werden kann, wenn sie einmal gebaut wurde. Die meisten Entscheidungen zur Festlegung der Geometrie von Räumen werden während eines sehr kurzen Zeitraums (Entwurfsphase) getroffen. Fehlentscheidungen die in dieser Phase getroffen werden haben langfristige Auswirkungen auf das Leben von Menschen, und damit auch Konsequenzen auf ökonomische und ökologische Aspekte.
Mittels computerbasierten Layoutsystemen lässt sich der Entwurf räumlicher Konfigurationen sinnvoll unterstützen, da sie es ermöglichen, in kürzester Zeit eine große Anzahl an Varianten zu erzeugen und zu überprüfen. Daraus ergeben sich zwei Vorteile. Erstens kann die große Menge an Varianten dazu beitragen, bessere Lösungen zu finden. Zweitens kann das Formalisieren von Bewertungskriterien zu einer größeren Objektivität und Transparenz bei der Lösungsfindung führen. Um den Entwurf räumlicher Konfigurationen optimal zu unterstützen, muss ein Layoutsystem in der Lage sein, ein möglichst großes Spektrum an Grundrissvarianten zu erzeugen (Vielfalt); und zahlreiche Möglichkeiten und Detaillierungsstufen zur Problembeschreibung (Flexibilität), sowie Mittel anzubieten, mit denen sich die Anforderungen an die räumliche Konfiguration adäquat beschreiben lassen (Relevanz). Bezüglich Letzterem spielen wahrnehmungs- und nutzungsbezogene Kriterien (wie z. B. Grad an Privatheit, Gefühl von Sicherheit, Raumwirkung, Orientierbarkeit, Potenzial zu sozialer Interaktion) eine wichtige Rolle.
Die bislang entwickelten Layoutsysteme weisen hinsichtlich Vielfalt, Flexibilität und Relevanz wesentliche Beschränkungen auf, welche auf eine ungeeignete Methode zur Repräsentation von Räumen zurückzuführen sind. Die in einem Layoutsystem verwendeten Raumrepräsentationsmethoden bestimmen die Möglichkeiten zur Formerzeugung und Problembeschreibung wesentlich. Sichtbarkeitsbasierte Raumrepräsentationen (Sichtfelder, Sichtachsen, Konvexe Räume) eignen sich in besonderer Weise zur Abbildung von Räumen in Layoutsystemen, da sie einerseits ein umfangreiches Repertoire zur Verfügung stellen, um räumliche Konfigurationen hinsichtlich wahrnehmungs- und nutzungsbezogener Kriterien zu beschreiben. Andererseits lassen sie sich vollständig aus der Geometrie der begrenzenden Oberflächen ableiten und sind nicht an bestimmte zur Formerzeugung verwendete geometrische Objekte gebunden.
In der vorliegenden Arbeit wird ein Layoutsystem entwickelt, welches auf diesen Raumrepräsentationen basiert. Es wird ein Evaluationsmechanismus (EM) entwickelt, welcher es ermöglicht, beliebige zweidimensionale räumliche Konfigurationen hinsichtlich wahrnehmungs- und nutzungsrelevanter Kriterien zu bewerten. Hierzu wurde eine Methodik entwickelt, die es ermöglicht automatisch Raumbereiche (O-Spaces und P-Spaces) zu identifizieren, welche bestimmte Eigenschaften haben (z.B. sichtbare Fläche, Kompaktheit des Sichtfeldes, Tageslicht) und bestimmte Relationen zueinander (wie gegenseitige Sichtbarkeit, visuelle und physische Distanz) aufweisen. Der EM wurde mit Generierungsmechanismen (GM) gekoppelt, um zu prüfen, ob dieser sich eignet, um in großen Variantenräumen nach geeigneten räumlichen Konfigurationen zu suchen. Die Ergebnisse dieser Experimente zeigen, dass die entwickelte Methodik einen vielversprechenden Ansatz zur automatisierten Erzeugung von räumlichen Konfigurationen darstellt: Erstens ist der EM vollständig vom GM getrennt, wodurch es möglich ist, verschiedene GM in einem Entwurfssystem zu verwenden und somit den Variantenraum zu vergrößern (Vielfalt). Zweitens erlaubt der EM die Anforderungen an eine räumliche Konfiguration flexibel zu beschreiben (unterschiedliche Maßstäbe, unterschiedlicher Detaillierungsgrad). Letztlich erlauben die verwendeten Repräsentationsmethoden eine Problembeschreibung vorzunehmen, die stark an der Wirkung des Raumes auf den Menschen orientiert ist (Relevanz).
Die in der Arbeit entwickelte Methodik leistet einen wichtigen Beitrag zur Verbesserung evidenzbasierter Entwurfsprozesse, da sie eine Brücke zwischen der nutzerorientierten Bewertung von räumlichen Konfigurationen und deren Erzeugung schlägt.
Inhaltliche Struktur:
Theoretischer Teil: Um Kulturtechniken des künstlerischen Ausdruckes, und damit den Bezug zwischen Kunst und Medientechnologie zu ergründen, wurde das Verhältnis zwischen dem Betrachter und dem Betrachteten erforscht. Begriffe wie Originalität, Repräsentation, Imitation sowie Aneignung und Rezeption kommen an historischen Beispielen zur Diskussion.
Praktischer Teil: Mit zwei Ausstellungen (Malerei, Installation) wurden verschiedene Modelle des Sehens problematisiert, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur begründen. Außerdem wurden die Unterschiede zwischen Beobachter und Betrachter/Zuschauer in Ausstellungssituationen hinterfragt.
Kurzfassung:
Medientechnologie hat sich selbst zu einer Kunstform entwickelt. Sie kann Künstler dabei unterstützen, ihre Ideen handwerklich umzusetzen (Beispiel: Camera Obscura) und zu reflektieren. Dabei geht es um mehr als um technische Hilfmittel für den künstlerischen Ausdruck. Wird die Beziehung zwischen Betrachter und Betrachtetem als eine Transaktion gesehen, in der beide Begriffe gleichermaßen aufs Spiel gesetzt werden, dann ist es notwendig eine Visualität zu bestimmen, an der der Betrachter (im Sinne von Jonathan Crary) aktiv teilnimmt. Das Sehen darf nicht als absolute Erfahrung verstanden werden, denn einzeln analysiert – ohne Einbeziehung anderer Sinneswahrnehmungen und deren mediale Erweiterungen – führt es zu keinem adäquaten Verständnis davon, wie Bedeutungen produziert werden. Daraus ergibt sich die Forschungsfrage, wie die künstlerische Reaktion auf die im 19. Jahrhundert aufstrebenden Fotografie die Ausdrucksformen beeinflusste und ob sich die gegenseitige Abhängigkeit von Malerei und Fotografie wissenschaftlich-künstlerisch rekonstruieren lässt.
Die theoretische Referenz für diese Forschung bildeten Theorieansätze nicht der Kunstgeschichte, sondern der „Visual Culture Studies“, konkret: Martin Jay („Scopic Regimes of Modernity“), Jonathan Crary („Techniques of the Observer“) und Rosalind Krauss („Originality“).
Dazu wurde die Rezeption der aufkommenden Fotografie in der künstlerischen Produktion beispielhaft untersucht, wobei mit Eugène Delacroix, Gustave Caillebotte sowie dem künstlerischen Dialog zwischen Henri Matisse und Brassai die Problematik herausgearbeitet wurde, mit der sich die bildende Kunst im Lauf jener Jahrzehnte, in denen die Fotografie sich etabliert hat, konfrontiert sah. Sie war eine medientechnische Neuheit mit älteren Wurzeln und diente der Malerei als Hilfsmittel (Camera Obscura) und hat durch ihr technische Potenzial dennoch das Verständnis von Kunst radikal verändert: sie löste das Ideal einer bestimmten Maltechnik ab, die sich mit dem Verbergen des Pinselstriches verband, und bedeutete in diesem gewissen Sinn das „Ende der Kunst“ (nach Paul Delaroche).
Bis in die heutige Kunstproduktion zieht sich die Frage, was nach dem Ende der Perfektionierung von Reproduktion durch ihre Übernahme mittels medientechnischer Apparatur, die nun selbst zum Ausdruck strebt, überhaupt noch ein „Kunstwerk“ ist oder sein kann. Technisch gestützte Formen der Aneignung und Imitation stellen das klassische Wertemodell der meisterlich ausgeführten Repräsentation von Wirklichkeit in Frage, obwohl „Originalität“ angesichts der Flut von Reproduktionen doch immer noch - oder gerade deswegen - eine Wertschätzung erfährt.
Daher wurden dann auch im künstlerischen Teil verschiedene Modelle des Sehens getestet, um kulturelle und historische Variablen zu ermitteln, die visuelle Kultur beeinflussen und festlegen. Dabei wurde vor allem auch die Rolle der Beobachter reflektiert - die anders als bei Unterhaltungsmedien - in Kunstkontexten eben keine passiven Zuschauer sind. Was den Künstler, und was den Betrachter von Kunst definiert, lässt sich gleichwohl weder auf ein bestimmte Sinnlichkeit noch eine bestimmte Medientechnologie reduzieren.
Wie schon nach dem Aufkommen der Fotografie werden Künstler weiterhin auf der Suche nach neuen Ausdrucksformen sein, um andere Weltwahrnehmungen und neue, andere Perspektiven menschlicher Existenz zu erlangen. Mediale Technologien haben sie dabei immer schon unterstützt. Aus meiner Untersuchung schließe ich, dass neue Technologien Kunst nicht definitv beeinflussen, wohl aber ihren Entstehungsprozess verändern und beeinflussen können. Die Frage, wie das geschieht und welche Effekte es zeitigt, bedarf einer stets erneuerten Verhandlung.
Daraus folgt die Schlussfolgerung, dass man von Künstlern verlangen kann oder sogar muss, sich vor der Wirklichkeit der Technologie nicht zurückzuziehen, sondern sich medientechnische Kompetenzen anzueignen und sich aktiv am Diskurs um neue Technologien zu beteiligen.