Refine
Document Type
- Conference Proceeding (123)
- Article (66)
- Doctoral Thesis (25)
- Master's Thesis (5)
- Diploma Thesis (1)
Institute
- Professur Informatik im Bauwesen (177)
- Professur Baubetrieb und Bauverfahren (10)
- Professur Grundbau (4)
- Professur Holz- und Mauerwerksbau (4)
- Professur Allgemeine Baustoffkunde (2)
- Professur Entwerfen und Architekturtheorie (2)
- Professur Informatik in der Architektur (2)
- Professur Massivbau I (2)
- Institut für Strukturmechanik (ISM) (1)
- Junior-Professur Computational Architecture (1)
Keywords
- Verteiltes System (37)
- Bautechnik (30)
- Bauwerk (27)
- Produktmodell (25)
- Simulation (23)
- Architektur (21)
- Modellierung (21)
- Mehragentensystem (19)
- Ingenieurbau (17)
- Planungsprozess (17)
Year of publication
- 2004 (220) (remove)
This paper presents an evaluation system for steel structures of hydroelectric power stations, including hydraulic gates and penstocks, based on Fault Tree Analyasis (FTA) and performance maps. This system consists of fault tree diagrams of FTA, performance maps, design and analysis systems, and engineerin databases. These four modules are integrated by appropriate hyperlinks so that the user of this system can use it easily and seamlessly. A well developed system was applied to some illustrative example cases, and they showed that the developed methodology and system worked well and the users found the system useful and effective for their maintenance tasks at powerstations.
This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system.
Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction.
Die Entstehung des Baugrundes ist geprägt durch die Genese und von anthropogenen Einflüssen. In der Arbeit werden auf der Grundlage isotroper Betrachtungen im Halbraum Prognosen für unbeprobte Bereiche eines linienförmigen Bauwerkes erstellt. Aufbauend auf dem bekannten Algorithmus der Geostatistik werden Berechnungen mit deterministischen Eingangsgrößen durchgeführt. Diese sind in einem Datensatz zusammengefasst und gehen ohne Unterteilung bzw. Bildung von (Homogen)Bereichen in die Schätzungen ein. Zur Anwendung kam dabei die an der Professur Grundbau der Bauhaus-Universität Weimar entwickelte Software GeoStat. Nach der Variogrammanalyse folgten geostatistische Berechnungen mit dem Ordinary und dem Universal Kriging. Der genutzte Datensatz unterlag dabei mehrfachen Modifikationen, um Unterschiede in der Ergebnisbildung beobachten zu können. Die Krigingschätzungen wurden für subjektiv ausgewählte Beprobungspunkte erstellt, die mit Referenzprofilen verglichen werden konnten. Im Ergebnis traten für alle durchgeführten Simulationen erhebliche Abweichungen der berechneten Werte zu den Referenzprofilen auf. Die Verwendung von Datensätzen ohne eine vorherige Bearbeitung und Unterteilung in Homogenbereiche erweist sich als nicht ratsam. Vielmehr ist es notwendig kompliziertere Krigingvarianten einzusetzen bzw. die benutzten Methoden mit anderen Verfahren zu kombinieren.
In der Dissertation wurden unterschiedliche Methoden zur Standortidentifizierung mit Oberflächenwellen analysiert. Es wurden neue Methoden zur Parameteridentifikation unter Nutzung von Oberflächenwellen vorgeschlagen. Die Ziele der Arbeit können wie folgt definiert werden: a) Die Entwicklung eines geeigneten theoretischen Modells als Grundlage zur Untersuchung des Standortes hinsichtlich vorhandener Bodensteifigkeiten. b) Die Entwicklung einer neuen Inversionsmethodik unter Berücksichtigung aller auftretenden Moden im Oberflächenwellenfeld. Die Erstellung eines Modells des vertikal heterogenen Untergrundes erfolgte im Frequenz-bereichs für beliebig geschichtete Böden, aufbereitet durch weitestgehend analytische Formulierungen. Durch Nutzung beliebiger horizontaler, elastisch-isotroper Schichten konnte die vertikale Heterogenität approximiert werden. Die Definition der Green'schen Funktionen wurde in Form der Reflexions- und Transmissionskoeffizienten durchgeführt. Die Lösung des formulierten Halbraumproblems erfolgte unter Verwendung der Konturintegration. Dazu wurde die Vorgehensweise der bestehenden Lösung des homogenen Halbraums auf das Problem des geschichteten Mediums übertragen. Die daraus sich ergebende Lösung ist in ein Körperwellen- und ein Oberflächenwellenfeld separiert. Der Vorteil dieser analytischen Betrachtungsweise liegt in der eindeutigen Zuordnungsmöglichkeit der erhaltenen Lösungen zu Wellentypen und in der klaren Dispersionscharakteristik der berechneten Modelle. Im Gegensatz dazu liefern numerische Lösungen, wie FEM, immer ein Wellenfeld, in dem die Wellentypen zugeordnet bzw. interpretiert werden müssen. Mit Hilfe der synthetischen Bodenmodellierung wird das Verhalten von geschichteten Böden bei durchlaufenden Oberflächenwellenfeldern simuliert und untersucht. Für die Untersuchung der Profile wurde hauptsächlich die Modale Superposition von Oberflächenwellen und die Wellenzahl-Integration verwendet. Bei der Analyse von Oberflächenwellenfeldern in vorhandenen Medien sind abweichend von den üblichen seismischen Methoden spezielle Untersuchungsmethoden zur Ermittlung der vorhandenen Dispersion notwendig. Zur Durchführung der Dispersionsanalyse wird in geotechnischen Untersuchungen in der Regel das Phasen-Differenzen-Verfahren (SASW) genutzt. Aufgrund der beschränkten Aussagefähigkeit dieses Verfahrens zu auftretenden höheren Moden werden verbesserte Analysemethoden zur experimentellen Auswertung hinzugezogen. Diese Methoden nutzen zur Informationsgewinnung das räumlich ausgedehnte Wellenfeld. Ausgehend von dem Dispersionsverhalten kann die Bodenstruktur mittels inverser Methoden bestimmt werden. Für die gemeinsame Inversion der in den Messungen vorhandenen Moden wurde ein entsprechendes Inversionsverfahren abgeleitet. Als Grundlage der Inversion wurde ein Verfahren des kleinsten Fehlerquadrates gewählt. Der Vorteil hinsichtlich einer effizienten und stabilen Inversion unter Nutzung dieser Methodik überwiegt den Nachteil der lokalen Suche nach dem Fehlerminimum. Zum Erreichen der stabilen und zielgerichteten Inversion wird der Levenberg-Marquardt Algorithmus, zusammen mit der Wichtung der Dispersionsäste entsprechend ihres Anregungsverhaltens in den Dispersionsspektren, eingesetzt. Von Vorteil hat sich innerhalb der Arbeit die gleichzeitige Behandlung von theoretischen und experimentellen Parameterstudien erwiesen, da sich Ergebnisse und Erkenntnisse beider Seiten ergänzten. Eine Interpretation von Felddaten kann damit weitaus sicherer durchgeführt werden. Zusätzlich konnten die erarbeiteten experimentellen und theoretischen Verfahren gegenseitig überprüft werden.
Das Pionierlager Artek. Realität und Utopie in der sowjetischen Architektur der sechziger Jahre
(2004)
Das in den 1960er Jahren gebaute, internationale Pionierlager Artek an der Schwarzmeerküste der Krim war das größte Kinderferienlager der Sowjetunion. Als Prestigeobjekt und Vorzeigeinstitution steht Artek für die Architektur der Ära Chruschtschows, des sogenannten „Tauwetters“. Anhand des dialektischen Prinzips von Präsentation und Repräsentation werden vier Aspekte des Lagers untersucht: Architektur, städtebauliche Struktur, Erziehung und Gesamtkunstwerk. Durch dieses Prinzip, das sich aus der Widerspiegelungstheorie ableiten läßt, kann jedem dieser Aspekte die Kongruenz zur ideologischen Zielsetzung und damit die gestalterische Kohärenz der Ferienanlage nachgewiesen werden. In Abgrenzung zur modernen Architektur der westlichen Industrienationen wurde in Artek eine spezifisch „sozialistische Moderne“ für die Sowjetunion und die übrigen Staaten des Ostblocks definiert. Diese war eng verbunden mit dem Städtebau auf der Grundlage von Mikrorayons und der Ausgestaltung von Stadt- und Subzentren. Artek ist mit seiner idealtypischen, architektonischen und städtebaulichen Gestaltung ein Denkmal für die frühere Sowjetunion.
Organisational and human issues have been highlighted, among other issues (ICT infrastructures, legal and contractual, etc.), as key elements in enhancing the competitiveness of the construction sector. More specifically, the importance of human resources has been recognised, especially training and professional development, in order to cultivate a stable workforce. The paper provides a review of the key training needs for the construction sector with particular reference to the uptake and exploitation of new technologies and working practices, presents an action plan to address learning and training needs, and proposes an eight-stage iterative learning and training methodology. The results will be of particular interest to managers in stakeholder organisations of all sizes throughout the sector, plus academic and research bodies intending to continue construction ICT research.
The processes in the life cycle of buildings are characterised by highly distinct teamwork. The integration of all the distributed working participants, by providing an environment, which especially supports the communication and collaboration between the actors, is a fundamental step to improve the efficiency of the involved processes and to reduce the total costs. In this article, a link based modelling approach and its “intelligent” link management is introduced (1). This approach realises an integration environment based on a special building model that acts as a decision support system. The link-based modelling is characterised by the definition and specialisation of links between partial models. These intelligent managed links enable a very flexible and task specific data access and exchange between all the different views and partial models of the participants.
Preparation and provision of building information for planning within existing built contexts
(2004)
A prerequisite for planning within existing built contexts is precise information regarding the building substance, its construction and materials, possible damages and any modifications and additions that may have occurred during its lifetime. Using the information collected in a building survey the user should be able to “explore” the building in virtual form, as well as to assess the information contained with regard to a specific planning aspect. The functionality provided by an information module should cover several levels of information provision ranging from ‘simple retrieval’ of relevant information to the analysis and assessment of stored information with regard to particular question sets. Through the provision of basic functionality at an elementary level and the ability to extend this using plug-ins, the system concept of an open extendable system is upheld. Using this modular approach, different levels of information provision can be provided as required during the planning process.
In this contribution the software design and implementation of an analysis server for the computation of failure probabilities in structural engineering is presented. The structures considered are described in terms of an equivalent Finite Element model, the stochastic properties, like e.g. the scatter of the material behavior or the incoming load, are represented using suitable random variables. Within the software framework, a Client-Server-Architecture has been implemented, employing the middleware CORBA for the communication between the distributed modules. The analysis server offers the possibility to compute failure probabilities for stochastically defined structures. Therefore, several different approximation (FORM, SORM) and simulation methods (Monte Carlo Simulation and Importance Sampling) have been implemented. This paper closes in showing several examples computed on the analysis server.
Many problems related to data integration in AEC can be better tackled by an approach that takes into account the heterogeneity of tasks, models and applications but does not require continuous consistency of the evolving design data, at each data management operation. Such an approach must incorporate adequate services that can facilitate reintegration of concurrently modified data at reasonably selected coordination points. In this paper we present a set of methods which, used in combination, can achieve that goal. After a description of the principal envisaged cooperative work scenario each of these methods is discussed in detail and current observations drawn from their software realisation are given. Whilst the suggested approach is valid for any EXPRESS-based data model, the practical focus of work has been on facilitating IFC-driven integration.
The increased implementation of site data capture technologies invariably results in an increase in data warehousing and database technologies to store captured data. However, restricted use of data beyond the initial application could potentially result in a loss of understanding of site processes. This could in turn lead to poor decision making at production, tactical and strategic levels. Concrete usage data have been collected from two piling processes. These data have been analysed and the results highlighted potential improvements that could be made to existing site management and estimating processes. A cost benefit analysis has been used to support decision making at the strategic level where the identified improvements require capital expenditure.
Diese erste umfassende Monographie über den Architekten, Professor und Museumsmann Manfred Lehmbruck (Paris 1913 – Stuttgart 1992) konzentriert sich neben dem Lebensweg und den theoretischen Arbeiten Lehmbrucks zum Museumsbau auf die drei realisierten Museumsbauten: das Reuchlinhaus Pforzheim, das Wilhelm-Lehmbruck-Museum Duisburg und das Federseemuseum Bad Buchau. Aber auch die drei anderen bedeutenden Gebäudeensembles, die Pausa AG Mössingen, die Berufsschule und das Stadtbad Stuttgart-Feuerbach und der Solitär der Mittelschule in Mössingen, alle fertiggestellt in den Sechziger Jahren des letzten Jahrhunderts, werden ausführlich besprochen. Das umfassende Werkverzeichnis im Anhang zeigt deutlich den Einfluß, den seine Lehrer, allen voran Ludwig Mies van der Rohe, aber auch Heinrich Tessenow, Paul Bonatz und Auguste Perret, auf die Architektursprache Lehmbrucks gehabt haben.
Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application.
The presented work focuses on the presentation of a discrete event simulator which can be used for automated sequencing and optimization of building processes. The sequencing is based on the commonly used component–activity–resource relations taking structural and process constraints into account. For the optimization a genetic algorithm approach was developed, implemented and successfully applied to several real life steel constructions. In this contribution we discuss the application of the discrete event simulator including its optimization capabilities on a 4D process model of a steel structure of an automobile recycling facility.
Individual views on a building product of people involved in the design process imply different models for planning and calculation. In order to interpret these geometrical, topological and semantical data of a building model we identify a structural component graph, a graph of room faces, a room graph and a relational object graph as aids and we explain algorithms to derive these relations. The application of the technique presented is demonstrated by the analysis and discretization of a sample model in the scope of building energy simulation.
The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed.
The purpose of this research is to develop the method to retrieve a building name from the impression of the building. First, the images of the building are registered as database by the questionnaire. Next, the images of the objective building are compared with the degree of matching in image databases, and the building with high synthetic matching degree is retrieved. This system could get a good retrieval result. Moreover, image processing was done, and image databases are trained by neural network from the amount of characteristics of the image, and the retrieval system by image processing was examined.
An important feature of the 2003 SARS outbreak in Canada, Singapore, and Hong Kong was that many health care workers (HCWs) developed SARS after caring for patients with SARS. This has been ascribed to inadequate or ineffective patient isolation. However, it is difficult for dense cities to provide sufficient isolation facilities within a short period of time. This has raised concerns from the public for new strategies in the planning and design of isolation facilities. Considering that SARS or other infectious diseases could seriously damage our society’s development, isolation facilities that could be rapidly and economically constructed with appropriate environmental controls are essential. For this reason, the design team of the Department of Architecture collaborated with a special task force from the Faculty of Medicine, who are the frontline medical officers treating the SARS patients, to design Rapidly Assembled Isolation Patient Wards. Both architecture and medicine are well established disciplines, but they have little in common in terms of the mode of knowledge construction and practice. This induced much intellectual exploration and research interest in conducting this study. The process has provided an important reference for cross disciplinary studies between the architectural and medical domains.
Complex gridshell structures used in architecturally ambitious constructions remain as appealing as ever in the public realm. This paper describes the theory and approach behind the software realisation of a tool which helps in finding the affine self-weight geometry of gridshell structures. The software tool DOMEdesign supports the formal design process of lattice and grid shell structures based upon the laws of physics. The computer-aided simulation of suspension models is used to derive structurally favourable forms for domes and arches subject to compression load, based upon the input of simple architectonic parameters. Irregular plans, three-dimensional topography, a choice different kinds of shell lattice structures and the desired height of the dome are examples of design parameters which can be used to modify the architectural design. The provision of data export formats for structural dimensioning and visualisation software enables engineers and planners to use the data in future planning and to communicate the design to the client.
The paper describes a concept for the step-by-step computer-aided capture and representation of geometric building data in the context of planning-oriented building surveying. Selected aspects of the concept have been implemented and tested as prototypes. The process of step-by-step capture and representation is determined by the order in which the user experiences the building. Only the information that the user knows (can see) or can reasonably deduce is represented. In addition approaches to the flexible combination of different measuring techniques and geometric abstractions are described which are based upon geodetic computational adjustment.
Die Arbeit beschreibt ein Konzept zur computergestützten, schrittweisen Erfassung und Abbildung der Geometrie von Gebäuden im Kontext der planungsrelevanten Bauaufnahme. Zunächst wird die Bauaufnahme als Erstellung eines verwendungsspezifischen Modells betrachtet. Anschließend wird der Fokus auf das geometrische Abbild gelegt. Es werden u.a. die Aufmaßtechniken Handaufmaß, Tachymetrie und Photogrammetrie bewertet und gebäudetypische geometrische Abstraktionen aufgelistet. Danach erfolgt eine Aufstellung von Anforderungen an ein computergestütztes Aufmaßsystem, welche mit kommerziellen Lösungen aus dem nichtgeodätischen Bereich verglichen wird. Im Hauptteil wird das zu Beginn genannte Konzept beschrieben. Betrachtet wird die skizzenbasierte Erstellung eines nichtmaßlichen geometrischen Abbildes des Gebäudes in den Frühphasen der Bauaufnahme, seine anschließende schrittweise maßliche Anpassung an das Original und topologische Detaillierung im Zuge des Bauaufmaßes, sowie die Extraktion von Bauteilen und ihren geometrischen Parametern. Zur Vereinfachung der maßlichen Anpassung des geometrischen Abbildes im Aufmaßprozeß werden geometrische Abstraktionen wie Parallelitäten, rechte Winkel usw. genutzt, aber nicht erzwungen. Mit Hilfe der Ausgleichungsrechnung erfolgt eine Zusammenführung der geometrischen Abstraktionen und verschiedener Aufmaßtechniken. Es werden die nötigen Beobachtungsgleichungen und andere relevante Aspekte beschrieben. Gezeigt wird weiter ein Konzept, wie ein nutzerseitig veränderbares Bauwerksmodell mit dem geometrischen Abbild in Bezug gebracht werden kann, wobei aus dem geometrischen Abbild geometrische Parameter des nutzerseitig veränderbaren Bauwerkmodells gewonnen werden können. Ausgesuchte Problematiken der Arbeit wurden prototypisch implementiert und getestet. Hierbei stand die Verbindung der Aufmaßtechniken und geometrischen Abstraktionen im Mittelpunkt. Die geometrischen Ansätze der Arbeit beschränken sich auf planare Oberflächen.
Recently, many reseraches on active control systems of building structures are preformed based on modern control theory and are installed real buildings. The authors have already proposed intelligent fuzzy optimal active control (IFOAC) systems. IFOAC systems imitate intelligent activities of human brains such as prediction, adaptation, decision-kaking and so on. In IFOAC systems, objective and subjective judgements on the active control can be taken into account. However, IFOAC systems are considered to be suitable for far-field erathquake and control effect becomes small in case of near-field earthqaukes which include a few velosity pules with large amplitudes. To improve control effect in case of near-souece earthquakes, the authors have also proposed hybrid control (HC) systems, in which IFOAC systems and fuzzy control system are combined. In HC systems, the fuzzy control systems are introduced as a reflective fuzzy active control (RFAC) system and imitates spinal reflection of human. In HC systems, active control forces are activated to buildings in accordance with switching rules on active control forces. In this paper, optimizations on fuzzy control rules in RFAC system and switching rules of active control forces in HC system are performed by Parameter-Free Genetic Algorithms (PfGAs). Here, the optimization is performed by using different earthquake inputs. The results of digital simulations show that the HC system can reduce maximal response displacements under restrictions on strokes of the actuator effectively in case of a near-source earthquake and the effectiveness of the proposed HC system is discussed and clarified.
The truss model for predicting shear resistance of reinforced concrete beams has usually been criticized because of its underestimation of the concrete shear strength especially for beams with low shear reinforcement. Two challengers are commonly encountered in any truss model and are responsible for its inaccurate shear strength prediction. First: the cracking angle is usually assumed empirically and second the shear contribution of the arching action is usually neglected. This research introduces a nouvelle approach, by using Artificial Neural Network (ANN) for accurately evaluating the shear cracking angle of reinforced and prestressed concrete beams. The model inputs include the beam geometry, concrete strength, the shear reinforcement ratio and the prestressing stress if any. ...
Indentation experiments have been carried out over the past century to determine hardness of materials. Modern indentation machines have the capability to continuously monitor load and displacement to high precision and accuracy. In recent years, research interests have focussed on methods to extract material properties from indentation load-displacement curves. Analytical methods to interpret the indentation load-displacement curves are difficult to formulate due to material and geometric nonlinearities as well as complex contact interactions. In the present study, an artificial neural network model was constructed for interpretation of indentation load-displacement curves. Large strain-large deformation finite element analyses were first carried out to simulate indentation experiments. The data from finite element analyses were then used to train the artificial neural network model. The artificial neural network model was able to accurately determine the material properties when presented with load-displacement curves which were not used in the training process. The proposed artificial neural network model is robust and directly relates the characteristics of the indentation loaddisplacement curve to the elasto-plastic material properties.
This paper describes monitoring of the in-valley discharge and underground water level at the place where the tunnel will be constructed and also, the numerical analysis for prediction applying the Tank Model and Linear Filter Method to calculate the prediction. The application of these analyses has actually allowed the change of underground water level to be grasped and more effective information system to be established by comparing the real-time monitoring data with the real-time calculation of prediction.
Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective.
Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design
(2004)
The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students.
Particle Simulation and Evaluation of Personal Exposure to Contaminant Sources in an Elevation Space
(2004)
An elevator, which figures a small volume, is normally used by everyone for a short period of time and equipped with simple ventilation system..Any contaminant released within it may cause serious problem. This research adapt a fire and smoke simulation software (FDS) into non-fire indoor airflow scario. Differently from previous research, particles are chosen as a risk evalution unit. A personal and multi-personal exposure model is proposed. The model takes the influence of the human thermal boundary, coughing, inhalation, exhalation, standing position, and the fan factor into account. The model is easy-to-use and suitable for the design of elevator system in practice.
This paper presents an innovative software platform OpenSTEP intended to build advanced distributed integrated systems and to conduct multidisciplinary collaborative projects in both academy and industry. The paper discusses an open system architecture, methodology, component library and CASE toolkit enabling the developers to build a wide range of interoperable applications and systems compliant with STEP and, particularly, with IFC becoming the increasingly important standard for information integration in architecture, engineering and construction.
The paper presents a general map-based approach to prototyping of products in virtual reality environments. Virtual prototyping of products is considered as a consistent simulation and visualization process mapping the source product model into its target visual representations. The approach enables to interrelate formally the product and visual information models with each other by defining mapping rules, to specify a prototyping scenario as a composition of map instances, and then to explore particular product models in virtual reality environments by interpreting the composed scenario. Having been realized, the proposed approach provides for the strongly formalized method and the common software framework to build virtual prototyping applications. As a result, the applications gain in expressiveness, reusability and reliability, as well as take on additional runtime flexibility...
Möglichkeiten der Projektrealisierung: Einzelvergabe der Planungs- und Bauaufgaben, Vergabe aller Planungs- und Bauaufgaben an einen Generalunternehmer. Die frühzeitige Einbindung eines erfahrenen und fachkundigen Generalunternehmers gibt dem Auftraggeber die Möglichkeit, bei minimiertem Risiko zu einer wirtschaftlich und bautechnisch optimalen Lösung seiner Bauaufgabe zu kommen.
Als Folge des hohen Termindrucks während des Bauablaufes, ist es besonders wichtig den Fortschritt eines Bauvorhabens zeitnah zu überwachen. Auf Großbaustellen kann die effektive Kontrolle nicht mehr ohne technische Hilfsmittel durchgeführt werden. Die Arbeit stellt verschiedene Szenarien für die verteilte Fortschrittserfassung vor und untersucht welche Anforderungen an ein System für die verteilte Erfassung gestellt werden. Dazu wird zuerst das bestehende CVS-System analysiert, um anschließend daraus ein Konzept für die Versionierung von Objekten und den automatischen Abgleich von Objektversionen zu entwickeln. Später wird gezeigt, wie dieses Konzept mit Hilfe von C# und dem Microsoft®-.NET-Framework umgesetzt werden kann.
Gegenstand der Arbeit ist die Untersuchung der bei der Herstellung von Branntkalk-Boden-Säulen auftretenden thermischen Effekte und ihres Einflusses auf Wasser- und Wasserdampftransporte im Boden. Die Erwärmung beruht vorrangig auf einer chemischen Reaktion, bei der das dem Boden zugemischte Calciumoxid mit Bodenwasser unter Freisetzung von Wärmeenergie zu Calciumhydroxid reagiert. Hierzu wurden zunächst die thermischen Eigenschaften feinkörniger Böden und ihre Beeinflussung durch das Herstellen des Bindemittel-Boden-Gemisches in situ untersucht. Weiterhin wurden Untersuchungen zum zeitlichen Verlauf der chemischen Reaktion und zur Größe der dabei freigesetzten Reaktionswärme vorgenommen. Mit dem Vorhaben, die mit der Säulenherstellung einhergehenden Temperaturfeldänderungen zu erfassen, wurden danach die thermischen Anfangs- und Randbedingungen des Bodens und der Bodenoberfläche untersucht und festgelegt. Anschließend wurden die zeitabhängigen Temperaturfeldänderungen auf der Grundlage der Wärmeübertragung durch Wärmeleitung mit Hilfe des Finite-Elemente-Methode Programms Ansys® 6.1 numerisch simuliert. Das Finite-Elemente-Modell wurde durch die Nachrechnung von Feldversuchen verifiziert. Im Rahmen der Finite-Elemente-Berechnungen wurde die infolge der Hydratation des Branntkalkes stattfindende Erwärmung des Bindemittel-Boden-Gemisches und des angrenzenden Bodens simuliert und hinsichtlich relevanter Einflussgrößen überprüft. Untersucht wurde der Einfluss herstellungsbedingter Faktoren wie Bindemittelkonzentration, Säulendurchmesser und Säulenanordnung sowie der Einfluss natürlicher Faktoren wie Trockendichte und Sättigungsgrad des Bodens. Die mit Hilfe der Finite-Elemente-Methode ermittelten zeitabhängigen, im Boden auftretenden Temperaturgefälle bilden die Grundlage für die Untersuchung der thermisch bedingten Wassertransportvorgänge in der Stabilisierungssäule und deren Umfeld. Zu diesem Zweck wurde die durch die Temperaturfeldbeeinflussung geänderte energetische Situation des Bodenwassers analysiert. Auch nicht-thermische, infolge der Säulenherstellung auftretende Effekte wie die durch den >Stopfeffekt< bedingte lokale Sättigungsänderung und die Beeinflussung des osmotischen Potentials einschließlich der daraus resultierenden Wasserbewegungen wurden berücksichtigt. Alle thermisch verursachten Wasser- und Dampfflüsse bewirken ein Abströmen von Porenwasser aus dem stabilisierten Erdkörper in den umliegenden Boden. Baupraktisch bleiben die durch thermische Einflüsse hervorgerufenen Wassertransportvorgänge aufgrund ihres geringen Betrages jedoch unbedeutend. In abschließenden Temperaturfeldberechnungen wurden die thermischen Bodenkennwerte an die sich zeitlich verändernde Wassersättigung des Bodens angepasst. Anhand der ermittelten Temperaturverläufe wurde aufgezeigt, dass der Einfluss der Sättigungsänderung auf die Berechnungsergebnisse sehr gering ist, und damit die Voraussetzung für die vorangegangene entkoppelte Betrachtung des Wärme- und Massestromes erfüllt ist. Aufgrund dieser Ergebnisse muss der mehrfach in der Literatur zitierte, auch mit der tiefgründigen Bodenstabilisierung in Zusammenhang gebrachte, Einfluss der Erwärmung auf die Verdunstung des Bodenwassers kritisch betrachtet und in Frage gestellt werden. Voraussetzung hierfür ist der Transport von Wasser an die Bodenoberfläche. Nennenswerte, auf Temperatureinflüssen beruhende Wasserbewegungen sind, wie die Berechnungsergebnisse gezeigt haben, nicht zu erwarten. Weitere Untersuchungen zur Festigkeitsentwicklung von Branntkalk-Boden-Säulen und deren Vorhersage sollten sich daher auf die mechanischen Effekte und auf die mineralogisch-chemischen Prozesse, wie die puzzolanischen Reaktionen, und die Möglichkeiten ihrer Prognose konzentrieren. Die Berechnungen haben gezeigt, dass die Temperaturentwicklung in der Stabilisierungssäule im Wesentlichen durch die Bindemittelkonzentration, und ihr Auskühlungsverhalten vorrangig durch ihre geometrischen Abmessungen bestimmt wird. Diese Sachverhalte sind von den Bodenparametern, der für die Stabilisierung in Frage kommenden Böden, weitestgehend unabhängig. Temperaturmessungen stellen daher ein geeignetes Mittel zur Qualitätssicherung bei der Herstellung von Branntkalk-Boden-Säulen dar, mit deren Hilfe sich Inhomogenitäten bei der Bindemittelverteilung oder Störungen beim Hydratationsvorgang (Ablöschen des Branntkalkes) nachweisen lassen. Entsprechende Hilfsmittel wurden angegeben.
Today’s building industry not only demands more and more reduced construction time on building site, but also an advanced and mostly construction attendant design phase. Even though there is software available to support design processes in distributed environments, most applications only support simple document based exchange of information. In this paper a knowledge based system is presented to support cooperative, comprehensive design processes in distributed environments. The presented research project is financially supported by the German Research Community (DFG – Deutsche Forschungsgemeinschaft).
This paper is a report of Radio Frequency Identification (RFID) technology and its potential applications in the commercial construction industry. RFID technology offers wireless communication between RFID tags and readers with non line-of-sight readability. These fundamental properties eliminate manual data entry and introduce the potential for automated processes to increase project productivity, construction safety, and project cost efficiency. Construction contractors, owners, and material suppliers that believe technology can further develop methods and processes in construction should feel obligated to participate in RFID studies for the advancement of the construction industry as a whole.
This paper describes an approach to support co-operation of experts in heterogeneous geotechnical engineering project environments during both regular execution and handling of exceptional situations. A co-operation platform is introduced which is based on a generalized information model mapping key information about the construction project, the construction process as well as the organization structure. Several tools are provided to operate the information model in a network based environment.
Numerische Berechnung von Mauerwerkstrukturen in homogenen und diskreten Modellierungsstrategien
(2004)
Im Zentrum der Arbeit stehen die Entwicklung, Verifikation, Implementierung und Leistungsfähigkeit numerischer Berechnungsmodelle für Mauerwerk im Rahmen der Kontinuums- und Diskontinuumsmechanik. Makromodelle beschreiben das Mauerwerk als verschmiertes Ersatzkontinuum. Mikromodelle berücksichtigen durch die Modellierung der einzelnen Steine und Fugen die Struktur des Mauerwerkverbandes. Soll darüber hinaus der durch die Querdehnungsinteraktion zwischen Stein und Mörtel hervorgerufene heterogene Spannungszustand im Mauerwerk abgebildet werden, so ist ein detailliertes Mikromodell, welches Steine und Fugen in ihren exakten geometrischen Dimensionen berücksichtigt, erforderlich. Demgegenüber steht die vereinfachte Mikromodellierung, bei der die Fugen mit Hilfe von Kontaktalgorithmen beschrieben werden. Im Rahmen der Makromodellierung werden neue räumliche Materialmodelle für verschiedene ein- und mehrschalige Mauerwerkarten hergeleitet. Die vorgestellten Modelle berücksichtigen die Anisotropie der Steifigkeiten, der Festigkeiten sowie des Ver- und Entfestigungsverhaltens. Die numerische Implementation erfolgt mit Hilfe moderner elastoplastischer Algorithmen im Rahmen der impliziten Finite Element Methode in das Programm ANSYS. Innerhalb der detaillierten Mikromodellierung wird ein neues, aus Materialbeschreibungen für Stein, Mörtel sowie deren Verbund bestehendes nichtlineares Berechnungsmodell entwickelt und in das Programm ANSYS implementiert. Die diskontinuumsmechanische Beschreibung von Mauerwerk im Rahmen der vereinfachten Mikromodellierung erfolgt unter Verwendung der expliziten Distinkt Element Methode mit Hilfe der Programme UDEC und 3DEC. An praktischen Beispielen werden Probleme der Tragfähigkeitsbewertung gemauerter Bogenbrücken, Möglichkeiten zur Bewertung vorhandener Rissbildungen und Schädigungen an historischen Mauerwerkstrukturen und Traglastberechnungen an gemauerten Stützen ausgewertet und analysiert.
The contribution describes the didactical integration of wireless access networks for the campus of the University of Karlsruhe in the education of architects and engineers. It focuses on the development of an interdisciplinary communication network to encourage and promote the communication and collaboration between students. The project assumes that significant learning progresses in net-based learning scenarios are based upon the synchronous and asynchronous cooperation between the students themselves. The remote cooperation across borders of disciplines makes high demands on capacity in communicating and cooperating of the involved persons as well as on the supporting tools. Therefore, the collective acquisition of knowledge and cooperation has to be trained intensively during the studies. Based on the design and project oriented cooperation platform netzentwurf.de the authors developed the tools “Jobadmin“ to administrate multidisciplinary workgroups, the “Swarm Knowledge Catalogue“ to collect and store knowledge and “LivingCampus“, an instrument providing basic services for dynamic communication.
Der Einsatz von Lehmbaustoffen stößt an Grenzen, wenn das Material Feuchtigkeit ausgesetzt ist. Die vorliegende Arbeit enthält Untersuchungen zur Verbesserung der Wasserbständigkeit von Lehmbaustoffen. Es konnte gezeigt werden, dass mittels alumosilikatischer Polymerbinder der Widerstand von Lehmbaustoffen gegen Feuchteeinwirkung erheblich verbessert werden kann. Die positiven bauklimatischen Eigenschaften werden dabei nicht negativ beeinflusst.
Information and Communication Technologies (ITC) in education have been extensively discussed nowadays. In this e-learning scenario, the construction and use of environments that support teaching and learning is a reality. Therefore, for time and general resource savings it is crucial the access to hypermedia contents with great interactivity and with high reusability. Substantial efforts have been centered in the search for a metadata proposal (metadata is a generic term used to describe data that can be used to identify and to describe common characteristics among different documents) that can be standardized and is system independent for the so called learning objects.
Recent research shows that current learning strategies in construction industry have not been effective in implementing lean principles in construction. With that in mind the researchers set to investigate an alternative learning strategy in order to promote learning at the international level. A web-based environment, was developed for this project with the intent of promoting learning and knowledge exchange on the theory and practice of "process transparency" across different countries.
Business and engineering knowledge in AEC/FM is captured mainly implicitly in project and corporate document repositories. Even with the increasing integration of model-based systems with project information spaces, a large percentage of the information exchange will further on rely on isolated and rather poorly structured text documents. In this paper we propose an approach enabling the use of product model data as a primary source of engineering knowledge to support information externalisation from relevant construction documents, to provide for domain-specific information retrieval, and to help in re-organising and re-contextualising documents in accordance to the user’s discipline-specific tasks and information needs. Suggested is a retrieval and mining framework combining methods for analysing text documents, filtering product models and reasoning on Bayesian networks to explicitly represent the content of text repositories in personalisable semantic content networks. We describe the proposed basic network that can be realised on short-term using minimal product model information as well as various extensions towards a full-fledged added value integration of document-based and model-based information.
The contribution introduces a method for the distributed process modelling in order to support the process orientation in Structural Engineering, i.e., the modelling, analysis and management of planning processes. The approach is based on the Petri Net theory for the modelling of planning processes and workflows in Structural Engineering. Firstly, a central and coarse process model serves as a pre-structuring system for the detailed modelling of the technical planning activities. Secondly, the involved planning participants generate distributed process models with detailed technical workflow information. Finally, these distributed process models will be combined in the central workflow net. The final net is of great importance for the process orientation in Structural Engineering, i.e., the identification, publication, analysis, optimization and finally the management of planning processes.
The growing competition pressure in the building industry increases the demands on the design and construction processes in respect to economical, technical and time aspects. These demands require efficient improvements of the value-added chain, which can be realized mainly with the usage of innovative information- and communication-technologies. To support the collaboration of all participants involved in a certain building project the Workflow-Management-System “BauKom-Online” has been developed. In the focus of the system is to support the coordination of the participants and their information exchange. Such a software-method is well suited to ensure a high quality planning process. The modelling of business-processes enables a better self-comprehension of the participants work and helps to enhance the project performance. The system architecture of BauKom-Online contains two basic components: the processmodelling tool and the workflow-engine. The process-model contains of activities and states of the planning and construction processes and their relations. These connected processes compose the workflow. Such a process-model for engineering purposes has to satisfy several needs, e.g., the consideration of planning and building alternatives, dynamic changes of the model during execution of the project and the linkage to further technical objects like costs, building structure, specifications and documentmanagement. Furthermore, the scheduling of the project can be done within the process-model and can be visualized as a Gantt-diagram. ...
As a result of the pilot-project “Grundwasser-Online” the supervision and the active controlling of large monitoring- and catchment-areas are realised by a co-operative integration of all related institutions, a synchronisation-process to combine all distributed data into one central server database, and a high-level eGovernment-Service to provide evaluated information over the internet. Based on this software system the local authorities are able to supervise the groundwater-levels and to find adequate decisions, which finally result in official permissions for the usage of groundwater-reservoirs by the water supply companies.
Modeling of Freeway Traffic
(2004)
An integrated modeling of freeway traffic is developed, whose implementation in an uniform computer –aided simulation model facilitate comparative evaluation and systematic coupling of several traffic simulations, traffic controls, traffic measurements and traffic scenarios. The integrated modeling of freeway traffic is a basic mapping of freeway networks, control methods, measurements and different simulations of traffic flow...
In this paper we present a computer aided method supporting co-operation between different project partners, such as architects and engineers, on the basis of strictly three-dimensional models. The center of our software architecture is a product model, described by the Industry Foundation Classes (IFC) of the International Alliance for Interoperability (IAI). From this a geometrical model is extracted and automatically transferred to a computational model serving as a basis for various simulation tasks. In this paper the focus is set on the advantage of the fully three-dimensional structural analysis performed by p-version of the finite element analysis. Other simulation methods are discussed in a separate contribution of this Volume (Treeck 2004). The validity of this approach will be shown in a complex example.
Construction is a conservative industry that over the last twenty ye ars has experienced drastic changes in the way that interdisciplinary teams interact to design and execute a project. In this article we offer a general overview of how the main participants cooperate in the different phases of a construction project, and which are some of the main areas for communication improvement. We also explore the communication tools used in the exchange of information, and identify the main causes of information breakdown. The general framework of this study is of application to both standard and green projects. At the end of the article we discuss the peculiarities of green buildings. Our goal is to offer a series of industry insights derived from the perspective of a general contractor aimed at identifying the areas where contributions in computing and information exchange could have a greater impact on the successful completion of a project.
This paper presents a generic methodology for measurement system configuration when the goal is to identify behaviour models that reasonably explain observations. For such tasks, the best measurement system provides maximum separation between candidate models. In this work, the degree of separation between models is measured using Shannon’s Entropy Function. The location and type of measurement devices are chosen such that the entropy of candidate models is greatest. This methodology is tested on a laboratory structure and, to demonstrate generality, an existing fresh water supply network in a city in Switzerland. In both cases, the methodology suggests an appropriate set of sensors for identifying the state of the system.
Neben dem Schwerpunkt der Verflüssigung werden auch Zusatzmittel benötigt, die extrem lange Verarbeitbarkeitszeiten des Betons ermöglichen. Eine neue Wirkungsgruppe, durch die Verarbeitbarkeitszeiten von über 90 Stunden er-reicht werden können, sind Langzeitverzögerer (LVZ) auf der Basis von Phosphonsäure. In systematischen Versuchen wurden grundlegende Erkenntnisse über die Wirkungsmechanismen von LVZ auf die Hydratation gewonnen. Es hat sich gezeigt, dass die verzögernde Wirkung von LVZ auf die Bildung von schwer löslichem Calciumphosphonat zurückzuführen ist, welches die Partikeloberflächen žabdichtetœ. Vom Angebot an gelöstem Calcium hängt es ab, ob sich das žabdichtendeœ Calciumphosphonat direkt bildet oder ob durch den Calciumanspruch des LVZ eine kurzzeitig verstärkte Hydratation reaktiver Klin-kerphasen hervorgerufen wird. Sulfatoptimierte Zemente wiesen aufgrund der Anteile an Sulfatträger genüge! nd Calcium-Ionen für eine sofortige Bildung von Calciumphosphonat auf. In Verbindung mit der Bildung von primärem Ettringit bildet die Sulfatträgeroptimierung die Grundlage für die erwünschte Wirkungsweise des Zusatzmittels.
This paper focuses on a new three-level discretisation strategy which enables the transition between continuum/structural (I) and structural/black box modelling (II). The transition (I) is realised by means of a model adaptive concept based on an innovative finite element technology. For transition (II) we apply the truncated balanced realisation method (TBR). The latter represents an established system theoretical model reduction technique which is here combined with a novel substructure technique. The approach provides a modular concept to facilitate the computational analysis of complex structures. The final goal is to apply the strategy to life time estimation.
Entscheidungshilfen für die Planung von Anlagen zum naßmechanischen Recycling von Betonrestmassen
(2004)
Trotz der weiten Verbreitung erfolgt die Planung der Restbetonrecyclinganlagen immer noch durch learnig-by-doing, da verfahrenstechnisches Grundlagenwissen nicht vorliegt. Wer an verantwortlicher Stelle die Investition in eine neue oder in die Verbesserung einer bestehenden Restbetonrecyclinganlage beurteilen soll, steht vor einer komplexen Entscheidung, die unter Berücksichtigung unterschiedlichster Kriterien getroffen werden muss. In der Praxis besteht hinsichtlich der Qualitätssicherung der Recyclingprodukte, der Ablagerungen der noch reaktiven Zementpartikel, der Bemessung der eingesetzten Maschinen, der praktikablen Handhabung hinsichtlich einiger Detailprobleme sowie der Anordnung der verfahrenstechnischen Komponenten in Bezug zur Geländeoberkante weitgehend Unklarheit. Das allgemeine Verlangen nach einer durchdachten Entscheidungshilfe und die Notwendigkeit, zu einem sachlich begründeten Urteil zu kommen, macht Entscheidungshilfen für die Planung von Restbetonrecyclinganlagen erforderlich. Insbesondere da Fehlentscheidungen nicht nur mit großem Aufwand rückgängig gemacht werden können. Hierfür wurden 18 maßgebliche Entscheidungskriterien entwickelt. Diese Entscheidungskriterien wurden im Rahmen der Nutzwertanalyse als Projektziele entwickelt. Die erarbeiteten Kriterien einteilen: - Kriterien zur Qualitätssicherung bei der Verwendung der Recyclingprodukte Für die Wiederverwendung der Recyclingprodukte Restwasser und Restbetonzu- schlag sind im technischen Regelwerk Verfahrensweisen vorgechrieben. Hinsichtlich der Prozesse bei der Wiederverwendung konnten deutliche Ver- besserungspotentiale aufgezeigt werden. Besonders die Anwendung von online- Dichtemessverfahren im Vergleich zur Aräometermessung verbessert die Len- kungsprozesse zur Qualitätssicherung. Aber auch die weitere Klassierung oder das getrennte Lagern und Dosieren des Restbetonzuschlags im Vergleich zu der im technischen Regelwerk vorgeschriebenen Verfahrensweise des volumetrischen Abschätzens bringt Verbesserungspotential. - Kriterien zur Minimierung von Ablagerungen Noch reaktive Zementpartikel kommen zeitweise permanent mit Anlagen- komponenten, Leitungen und Beckeninnenflächen der Recyclinganlage in Be- rührung. Ablagerungen von Zementpartikeln, die den Betrieb der Anlage be- hindern, verschlechtern oder sogar verhindern, sind unvermeidbar. Aller- dings kann, wie im Rahmen dieser Arbeit gezeigt wurde, eine Minimierung der Ablagerungen durch geeignete Maßnahmen herbeigeführt werden. Die Ablage- rungen im Suspensionsbeckenlassen sich durch den Zustand der homogenen Suspension sowie durch das Strömungsbild angepasste Formgebung minimieren. Durch die geeignete Gefällewahl und vor allem durch die korrekte Wahl der Pumpenart können die Ablagerungen in Leitungen minimiert werden. - Kriterien zur Bemessung der verfahrenstechnischen Apparate Die Auslegung der Recyclinganlage hinsichtlich der Auswaschleistung, der Rührerleistung und der Größe des Suspendierraumes erfolgt bisher anhand von praktischen Erfahrungswerten. In dieser Arbeit wurde für die Auswasch- leistung ein allgemeingültiges Berechnungsmodel hergeleitet. Darüber hinaus wurde gezeigt, dass die Rührerleistung für das Suspendieren von Restwasser berechnet werden kann. Die Größe des Suspendierraumes kann unter Be- rücksichtigung der zu- und abfließenden Materialströme berechnet werden. Das Trennverhalten des mechanischen Klassierers wurde im Rahmen einer Ver- suchsreihe mit folgenden Ergebnissen ermittelt: a. Die Klassierdurchsätze steigen mit größer werdendem Entleerdurchsatz. ufgrund der Pufferwirkung des mechanischen Klassierers, bei der die diskontinuierlich in den Aufgabetrichter gefüllte Restbetontrübe (Ent- leeren) in einem kontinuerlichen Prozess (Klassieren) durch den Trog gefördert wird, nähert sich der Klassierdurchsatz asymtotisch einem Grenzwert an. b. Das Masseausbringen rbz wird signifikant vom Klassierdurchsatz und weniger vom Entleerdurchsatz beeinflusst. c. Die Korngrößenverteilung des Restbetons, des Restbetonzuschlags und des Restwassers belegen anschaulich den erreichten Trenneffekt. d. Die Trennkorngröße steigt mit zunehmendem Klassierdurchsatz an. Diese Tendenz ist allerdings nur bei Betrachtung des "nassen" Klassier- durchsatzes signifikant erkennbar. Bei Betrachtung des "trockenen" Durchsatzes ergibt sich keine Abhängigkeit. Die Ursache hierfür ist, dass in den "nassen" Durchsatz Prozesse wie Trübeagitation und Feinkorn- konzentration indirekt eingehen. e. Der Fehlkornanteil < 125 µm im Restbetonzuschlag steigt ebenfalls mit "nassem" Klassiersatz an. f. Im Unterschied dazu bestehen für den Fehlkornanteil > 125 µm im Rest- wasser signifikante Abhängigkeiten zu Entleer- und Klassierdurchsätzen. Ursache ist der tote Fluss. - Kriterien zur Praktikabilität des Anlagenberiebes - Interdependenzen zwischen Anlagenkomponenten
Three-dimensional models of urban objects play an important role in the urban applications such as urban planning, environmental concerning, or urban disaster mitigations. While the modeling of urban objects is time consuming and storage costing. This paper presents solutions for this. Buildings with regular shapes and plane roofs are constructed into computer models by identifying of graphic elements from the digital maps of urban area to get building base plane and building heights. Buildings with irregular shapes and non-plane roofs are constructed into computer models by employment of a specific system developed by the authors. Road objects and topologies are constructed into computer models by employment of specific algorithms. The solutions presented in this paper has been used in the development of urban disaster mitigation system for Shantou, China.
Site superintendents performing project management tasks on construction sites need to access project documents and need to collect information that they observe while inspecting the site. Often, information that is observed on a construction site needs to be integrated into electronic documents or project control systems. In the future, we expect integrated product and process models to be the medium for storing and handling construction project management information. Even though mobile computing devices today are already capable of storing and handling such integrated product and process data models, the user interaction with such large and complex models is difficult and not adequately addressed in the existing research. In this paper, we introduce a system that supports project management tasks on construction sites effectively and efficiently by making integrated product and process models accessible. In order to effectively and efficiently enter or access information, site superintendents need visual representations of the project data that are flexible with respect to the level of detail, the decomposition structure, and the type of visual representation. Based on this understanding of the information and data collection needs, we developed the navigational model framework and the application Site Data Collection System (SiDaCoS), which implements that framework. The navigational model framework allows site superintendents to create customized representations of information contained in a product and process model that correspond to their data access and data collection needs on site.
The paper gives a general overview and concerns with a specified set of computer-aided analysis modules for hybrid structures loaded by extreme excitations. All problems are solved by methods of linear, quadratic or nonlinear mathematical optimization, that leads to very effective and economic design solutions. All approaches are derived from general optimization problem that can be easily altered to conform to specific design tasks. Some advantages and possibilities of hybrid structural modeling (single or mixed model-supported) are discussed. The methods will be illustrated by an example structure and optimization schemes.
Voraussetzungen einer ordnungsgemäßen Ausschreibung, Beachtung des Vergaberechtssystems, Vergaberecht bei Privatisierungen, Abgrenzung zwischen VOL- und VOF-Verfahren, ordnungsgemäße Schwellenwertermittlung, Finanzierung und Planung, richtige Vergabeart, richtige Leistungs- und Aufgabenbeschreibung, ordnungsgemäße Wertung, Aufhebung der Ausschreibung, ordnungsgemäßer Vergabevermerk
Der Architektenvertrag als Werkvertrag (Konsequenzen: Haftung für den Werkerfolg, keine abschließende Bestimmung des vom Architekten geschuldeten Leistungsumfanges durch den Tätigkeitskatalog etwa von § 15 HOAI), vertragliche und außervertragliche Haftungstatbestände (vertragliche Ansprüche des Auftraggebers gegen den Architekten, Haftung gegenüber Dritten aufgrund des Architektenvertrages), typische Haftungsrisiken des Architekten, insbesondere im Kostenbereich sowie für Planungs- und Objektüberwachungsfehler (Haftung des Architekten für Überschreitung der Baukosten, Architektenhaftung bei Planungs- und Objektüberwachungsfehlern), Zulässigkeit der Vereinbarung von Haftungsbeschränkungen, Berufshaftpflichtversicherung für Architekten und Ingenieure
Development and Analysis of Sparse Matrix Concepts for Finite Element Approximation on general Cells
(2004)
In engineering and computing, the finite element approximation is one of the most well-known computational solution techniques. It is a great tool to find solutions for mechanic, fluid mechanic and ecological problems. Whoever works with the finite element method will need to solve a large system of linear equations. There are different ways to find a solution. One way is to use a matrix decomposition technique such as LU or QR. The other possibility is to use an iterative solution algorithm like Conjugate Gradients, Gauß-Seidel, Multigrid Methods, etc. This paper will focus on iterative solvers and the needed storage techniques...
For planning in existing built contexts, the building survey is the starting point for initial planning proposals, for the diagnosis and documentation of building damages, for the creation of objectives catalogues, for the detailed design of renovation and conversion measures and for ensuring fulfilment of building legislation, particularly by change of use and refitting. An examination of currently available IT-tools shows insufficient support for planning within existing contexts, most notably a deficit with regard to information capture and administration. This paper discusses the concept for a modular surveying system (basic concept, separation of geometry from semantic data, and separation into sub-systems) and the prototypical realisation of a system for the complete support of the entire building surveying process for existing buildings. The project aims to contribute to the development of a planning system for existing buildings. ...
Building activities in the construction industry in Germany increasingly concentrate on building measures in or involving the existing built environment. Before planning can begin, buildings must be surveyed in whole or in part with the surveying of geometric data playing a dominant role. The geometric survey is typically undertaken using geodetic or photogrammetric measuring techniques and equipment that have been adapted for use in building surveying. Accordingly appropriate technical knowledge is required in order to be able to operate them as well as a considerable financial investment. Such equipment and surveying methods are usually adaptations from other disciplines. The paper discusses and presents approaches to developing “new” equipment for building surveying, devised with the needs of building surveying in mind – redesigns or new designs for surveying tools. The designs are the result of an inter-disciplinary project between the Faculty of Architecture and the Faculty of Product Design at the Bauhaus Universität Weimar.
During the establishing of fundamentals in a building project a huge amount of influence factors and boundary conditions have to be investigated in order to provide the prerequisites for further planning processes. These investigative tasks are often related with a great effort concerning time and money, because there are no standardized workflows and interfaces which provide an efficient access to the necessary information related to a specific construction site. Within the fundamental investigation human and natural circumstances have to be taken into account. Thus, in this project two examples have been chosen in order to demonstrate the holistic approach for an integration and provision of georeferenced information. The developed internet-site http://www.grundlagenermittlung.de has been designed to support architects and civil engineers in early planning phases of a building project efficiently. It offers web-based services based on dynamic interfaces for a flexible search and collection of information concerning the building site. Therefore, a central Metadatabase-Server for Description, Discovery and Integration has been established which enables a registration of georeferenced services and the redirection of incoming requests to other, distributed data pools. Using this Yellow-Page concept in combination with the underlying meta-data based on the ISO 19115 standard an efficient investigation of geographical and environmental information becomes possible.
The increasing demands in building and civil engineering – with regard to the growing amount of legal requirements and the needs of a flexible usage of the building - requires an optimisation of all processes during the planning and construction phases. This aim can be only reached by transferring of innovative information and communication technologies in the field of cooperation of all partners in a building project. In this article the enhancement of the existing planning processes based on an improved information management is introduced. Since the late 90ies the availability of hardware and software infrastructures for a networkbased cooperation, e.g. email, in small and middle-sized companies increased the problems of an unstructured communication in the planning and construction processes. These problems have not been solved by the usage of the upcoming project communication systems either, which are often used as a simple medium for data transfer. Because of the easy way of distributing documents to all planning partners a huge amount of files and subsequent versions can be stored so that the planners often have to scope with an information overflow. The underlying hierarchical structures based on simple files stored in tree views are not sufficient for an adequate representation of the different specific views of the planners and the management of relationships between the three information domains building structure, costs and time schedules. ..
Let the information of a civil engineering application be decomposed into objects of a given set of classes. Then the set of objects forms the data base of the application. The objects contain attributes and methods. Properties of the objects are stored in the attributes. Algorithms which the objects perform are implemented in the methods of the objects. If objects are modified by a user, the consistency of data in the base is destroyed. The data base must be modified in an update to restore its consistency. The sequence of the update operations is not arbitrary, but is governed by dependence between the objects. The situation can be described mathematically with graph theory. The available algorithms for the determination of the update sequence are not suitable when the data base is large. A new update algorithm for large data bases has been developed and is presented in this paper.
This paper describes an Internet-enabled software model that could facilitate the development and utilization of nonlinear structural analysis programs. The software model allows users easy access to the analysis core program and the analysis results by using a web-browser or other application programs. In addition, new and legacy codes can be incorporated as distributed services and be integrated with the software framework from disparate sites. A distributed project management system, taking advantages of Internet and database technologies, is implemented to store and manage model information and simulation results. Nonlinear dynamic analysis and simulations of a bridge structure is performed to illustrate the facilities of the Internet-enabled software model.
The problem of data interoperability is now very important. The formal description of construction systems and objects must base upon the modeling for the description of construction data domain. The XML-language was selected as a basis of a universal data format, ensuring natural hierarchy of objects, flexibility, good layout and expandability. The language, developed by the author, is called Building Object Description Extensible Markup Language (bodXML). The types of all objects used by data transfer should be definite beforehand with existing methods of programming. It limits the possibilities of IT in application of new types. But the recipient software must recognize the building objects even if the kind of object is unknown at the outset. The author offers a set of main topological and geometric properties being sufficient for recognition of main three-dimensional building constructions with flat edges. The tests of artificial neuron network have shown that the recognition of a kind of the constructions represented as a set of indicated parameters happens enough confidently.
Die Energieversorgung auf der Erde wird zukünftig zu einem Problem. Bedingt ist dies durch eine fortschreitende Verknappung der natürlichen Ressourcen, wie Kohle, Gas und Öl sowie einer Zunahme der CO2-Konzentration und anderer Schadstoffe in der Atmosphäre. Regenerative Energiequellen müssen genutzt werden, um den steigenden Energiebedarf zu sichern. Eine interessante Möglichkeit zur Nutzung der Solarenergie stellt das Aufwindkraftwerk dar. Das Aufwindkraftwerk besteht aus einem Kamin, um den ein Glasdachkollektor auf dem Erdboden angeordnet ist. Am Fuße des Kamins befinden sich Turbinen und Generatoren. Die einfallende Solarenergie wird hauptsächlich über die Wechselwirkung mit dem Erdreich in thermische Energie, in kinetische Energie, in Rotationsenergie und in elektrische Energie umgewandelt. Das Ziel der Arbeit bestand in der physikalisch-mathematischen Modellierung, der genaueren Erkennung des Wirkprinzips und der Diskussion der Anlagenparameter Leistung und Wirkungsgrad. Im Rahmen dieser Aufgabe wurden dazu stationäre und instationäre Computational Fluid Dynamic (CFD) Modelle und stationäre und instationäre vereinfachte Modelle entwickelt, diskutiert und miteinander verglichen. Grundlegend neue Erkenntnisse wurden bei den Verläufen der Temperaturen im Kollektor, insbesondere der Erdoberflächentemperatur erreicht. Parameteranpassungen im Wärmeübergangsmodell und Widerstandsmodell führten für vier ausgewählte, stationäre Sonnenenergien auf eine gute Übereinstimmung zwischen den Ergebnissen (Temperaturhub, Druckentnahme, Leistung und Wirkungsgrad) des stationären, hybriden Modells und des stationären CFD-Modells. Weiterhin stimmen die lokalen Größen Wärmeübergangskoeffizient, Erdoberflächentemperatur, Lufttemperatur und Glasdachtemperatur gut zwischen den Modellen überein. Mit dem CFD Modell wurden der Prototyp und 3 Großkraftwerke berechnet. Mit dem entwickelten instationären FDM-Modell wurden erstmalig numerische Langzeitsimulationen (1 Jahr) durchgeführt. Zur Überprüfung des Modells wurden die Ergebnisse mit Messwerten aus Manzanares verglichen, wobei eine gute Übereinstimmung erreicht werden konnte. Das Verständnis für die stattfindenden thermodynamischen und strömungsmechanischen Prozesse in einem Aufwindkraftwerk konnte durch die Arbeit maßgeblich verbessert werden.
The paper describes further developments of the interactive evolutionary design concept relating to the emergence of mutually inclusive regions of high performance design solutions. These solutions are generated from cluster-oriented genetic algorithm (COGAs) output and relate to a number of objectives introduced during the preliminary design of military airframes. The data-mining of multi-objective COGA (moCOGA) output further defines these regions through the application of clustering algorithms, data reduction and variable attribute relevance analyses. A number of visual representations of the COGA output projected onto both variable and objective space are presented. The multi-objective output of the COGA is compared to output from a Strength Pareto Evolutionary Algorithm (SPEA-II) to illustrate the manner in which moCOGAs can generate good approximations to Pareto frontiers.
Integrated Engineering Workflow focused on the Structural Engineering in the Industrial Environment
(2004)
The engineering and construction industry has been slow to exploit the full potential of information technology. The industry is highly fragmented, price sensitive, risk-adverse, and profit margins are small. Each project is unique with a small amount of technological innovation opportunities to capitalise on from one project to the next. Technological innovations that have been taking place are just simulating the old traditional paper workflow. Engineering information in digital form is being conveyed using traditional paper representations, which have to be interpreted by humans before the information can be used in other applications, thereby creating ‘islands of information’. It can be seen that poorly implemented IT strategies are duplicating paperwork, rather than reducing or eliminating it (Crowley et al., 2000). This paper will introduce the Integrated Engineering Workflow (IEW) concept to re-organise a structural discipline working on multi-disciplinary projects so as to maximise the advantages offered by new information technology.
Effective knowledge management is increasingly considered as a cornerstone of sustainable business success. Knowledge management systems are strategically valuable for both ensuring consistency and continuous improvement of various aspects such as quality delivery, productivity and competitiveness. The small and medium enterprises (SMEs) in the construction industry are mostly operating under tighter timeframes, narrower profit margins and more constrained resources. Hence the recently commenced SMILE-SMC (Strategic Management with Information Leveraged Excellece for Small and Medium Contractors) project aims to support the information and knowledge management needs of the small and medium contractors in Hong Kong. This paper presents some snapshots on the SMILE-SMC project, and its conceptualized deliverables with some highlights of recent developments.
Research on Establishment of a Standard of Traffic Impact Assessment with Integrated Database System
(2004)
Planning support systems, such as geographical information system (GIS) and traffic flow simulation models, are widely in use in recent urban planning research. In this paper we propose a method to apply traffic impact assessment (TIA) to large-scale, commercial developments. In TIA research we often encounter the problem of increasing amount of data that is necessary for detailed investigation and analysis, as the scale of commercial developments become larger and more complex. As a result, TIA presents two problems. The first problem is the difficulty of data acquisition. The second problem is the reliability of data. As a solution, we developed an integrated database system.
The conceptual structure of an application that can support the structural analysis task in a distributed collaboratory is described in (van Rooyen and Olivier 2004). The application described there has a standalone component for executing the finite element method on a local workstation in the absence of network access. This application is comparable to current, local workstation based finite element packages. However, it differs fundamentally from standard packages since the application itself, and its objects, are adapted to support distributed execution of the analysis task. Basic aspects of an object-oriented framework for the development of applications which can be used in similar distributed collaboratories are described in this paper. An important feature of this framework is its application-centred design. This means that an application can contain any number of engineering models, where the models are formed by the collection of objects according to semantic views within the application. This is achieved through very flexible classes Application and Model, which are described in detail. The advantages of the application-centred design approach is demonstrated with reference to the design of steel structures, where the finite element analysis model, member design model and connection design model interact to provide the required functionality.
This paper examines the impact of information technology (IT) utilization on construction firm performance. Based on empirical data collected from 74 US construction firms, the analyses provide evidence that IT has a positive impact on overall firm performance, schedule performance, and cost performance. Firm performance is a composite score of several metrics of performance: schedule performance, cost performance, customer satisfaction, safety performance, and profit. No relationship is found between IT utilization and customer satisfaction, safety, or profit, although this may be due to limitations of the study given strong correlations between IT utilization and cost and schedule performnance. The empirical evidence of positive association between performance and IT use provided by this research is significant to both construction practice and research literature. This evidence should encourage firms to adopt and invest in IT tools.
The evolution of data exchange and integration standards within the Architectural, Engineering and Construction industry is gradually making the long-held vision of computer-integratedconstruction a reality. The Industry Foundations Classes and CIMSteel Integration Standards are two such standards that have seen remarkable successes over the past few years. Despite successes, these standards support the exchange of product data more than they do process data, especially those processes that are loosely coupled with product models. This paper reports on on-going research to evaluate the adequacy of the IFC and CIS/2 standards to support process modeling in the steel supply chain. Some initial recommendations are made regarding enhancements to the data standards to better support processes.
The primary objective of initial shape analysis of a cable stayed bridge is to calculate initial installation cable tension forces and to evaluate fabrication camber of main span and pylon providing the final longitudinal profile of the bridge at the end of construction. In addition, the initial cable forces depending on the alternation of the bridge’s shape can be obtained from the analysis, and will be used to provide construction safety during construction. In this research, we conducted numerical experiments for initial shape of Ko-ha bridge, which will be constructed in the near future, using three different typical methods such as continuous beam method, linear truss method, and IIMF (Introducing Initial Member Force) method
Im Gegensatz zu Industrieländern wird das barrierefreie und behindertengerechte Planen und Bauen von öffentlichen Gebäuden in Entwicklungsländern aus wirtschaftlichen und sozialen Gründen nur ungenügend berücksichtigt und realisiert. Die Analyse von international vorhandenen Normen und Richtlinien zeigte, dass in Vietnam die Integration behindertengerechter Konzepte in Bauplanungen erst seit dem Jahr 2002 stattfindet, wohingegen diese in China bereits seit den 80er Jahren und in den Industrienationen wie Deutschland und Amerika sogar schon seit drei Jahrzehnten Anwendung findet. Die ungenügende Berücksichtigung behindertengerechter Baukonzepte in öffentlichen Einrichtungen, so auch vor allem in Berufsschulen bewirkt eine drastische Reduzierung des Ausbildungsplatzangebotes und eine resultierende Perspektivlosigkeit für behinderte Menschen. Durch die schnelle Errichtung barrierefreier, behindertengerechter Ausbildungseinrichtungen sollen sich die Chancen auf einen Ausbildungsplatz für behinderte Vietnamesen deutlich verbessern. Mit dem Erhalt eines Ausbildungsplatzes wird diesen Menschen nicht nur eine Integration in die Gesellschaft sondern langfristig gesehen auch finanzielle Selbständigkeit und somit Unabhängigkeit von der Familie ermöglicht. Als Grundlage des angestrebten Umwandlungsprozesses von der herkömmlichen barrierebelasteten Bauplanung zur Berücksichtigung von behinderten Menschen durch behindertengerechte Planungskonzepte wurden Bauzeit, Bauumfang und Baukosten eingehend analysiert. Dieser vergleichenden Betrachtung der Bauplanungen entwuchsen zwei neue barrierefreie Berufschultypen. Der neue Berufsschultyp 1 – Der Dezentralisierungstyp zeichnet sich durch einen geringfügigen Bauumfang und durch seine einfache Baukonstruktion aus und ermöglicht somit eine schnelle Reaktion auf den gravierenden Ausbildungsplatzmangel für behinderte Menschen. Dieser kostengünstige Berufsschultyp wurde entwickelt, um sehr kurzfristig eine schnelle Erhöhung des Ausbildungsplatzangebotes für behinderte Menschen zu schaffen. Siedlungs- und Wohngebiete bzw. Dörfer eignen sich am besten als Standort für den Berufsschultyp 1. Das ursprüngliche Wohnumfeld bliebe den behinderten Schülern erhalten und damit einhergehend auch die seelische Unterstützung durch deren Familien. Der familiennahe Standort der Berufsschule würde somit sowohl den Lehrern als auch den Schülern eine große seelische Last abnehmen. Des Weiteren ließe sich eine Berufsschule vom Typ 1 schnellstens errichten, so dass die Ausbildung der behinderten und nicht behinderten Schüler sofort aufgenommen werden könnte. Im Zuge der Entwicklung des neuen Berufsschultyps 2 – Dem Zentralisierungstyp - wurden internationale Standards angestrebt. Dieser Berufsschultyp bietet eine umfangreichere Flexibilität in seiner Nutzungsart, ein umfassenderes Angebot an Ausbildungsgängen und ein weitaus größeres Feld der Integration. Der Berufsschultyp 2 ist ein komplexer Bau, mit einem größeren Bauumfang als Berufsschultyp 1. Bei der Errichtung dieser Berufsschultypen ist mit einer langfristigen Planungs- und Bauzeit zu rechnen. Der Stadtrand wird als der optimale Standort zur Errichtung der Berufsschule vom Typ 2 angesehen. Von dort aus ließen sich die öffentlichen Service der Stadt effizient nutzen. Als Bewertungsgrundlage für eine optimale Entwicklung der beiden neuen Berufsschultypen dienen Basisdaten aus umfassenden Analysen über verschiedenste Betrachtungsebenen. Unter Nutzung der in Deutschland und USA bestehenden gesetzlichen Grundlagen sollen barrierefreie Planungsempfehlungen, gezielt für die Errichtung behindertengerechter berufsausbildender Schulen in Vietnam, abgleitet werden, um ein gemeinsames Lernen von seh- und mobilitätsbehinderten sowie von nicht behinderten Menschen zu ermöglichen. Bei den Planungsempfehlungen finden nicht nur die unterschiedlichen menschlichen Körpergrößen der verschiedenen Bevölkerungsgruppen sondern auch die unterschiedliche Lebensweise der Vietnamesen sowie die Klimabedingungen in Vietnam Berücksichtigung. Bei der Planung von behindertengerechten Ausbildungs- und Schuleinrichtungen ist es wichtig, die Körpergröße der Menschen des jeweiligen Landes zu berücksichtigen. Als Orientierungsmaß für die Körpergröße vietnamesischer Menschen wurde ein Richtfaktor definiert und eingesetzt. Anhand der o.g. Richtfaktorgrößen wurden detaillierte Planungsempfehlungen für barrierefreies Lernen und Wohnen herausgearbeitet.
Buildings require both for construction and, due to their comparatively long life cycle for maintenance, significant raw material and energy resources. So far available knowledge about resource consumption during an entire life cycle of a building is still quite rare, because various criteria affect each other and/or overlay mutually. In this contribution a model based software concept is presented using an integrated approach for life cycle simulation and assessment of buildings. The essential point of the development consists of connecting an IFC compliant product model of a building via the Internet with data bases for the resource and energy requirement of building materials. Furthermore, numerical simulations allow calculating and minimizing the energy consumption, the resource requirement, the waste streams and also the noxious emissions. In the context of this paper we present the first release of software programs for architects and engineers, which help them to evaluate their design decisions objectively in early planning steps. Additionally the usage of the software is demonstrated by a test case study for a real world building. By applying this software in practice a substantial contribution for saving energy and natural resources can be provided in the sense of sustainable and ecological building design.
Der Sage nach wurde Europa, jene fremde Königstochter, vom Göttervater Zeus in der Verkleidung eines majestätischen Stiers vom fernen Phoenizien nach Kreta – wörtlich – „übertragen“, das heißt von hier nach dort getragen. So gesehen erzeugt Europa einen dritten Raum, einen Trenn- und/oder Bindestrich zwischen Orient und Okzident, als diasporadische Figur und auch als Kontinent. Die Logik eines solchen Strichs, der zugleich trennt und verbindet, findet eine kartographische Entsprechung im nullten Längengrad, der die ganze Welt in ein Einheit schaffendes Koordinatensystem „übersetzt“, mit Greenwich als Zentrum. Ein Äquivalent eines solchen fixen Ausgangspunktes findet sich in der perspektivischen Europa-Darstellung in Tiepolos Darstellung der Kontinente im Deckenfries des Treppenhauses der Fürstbischöflichen Residenz in Würzburg. In diesem architektonischen Gemälde bildet Europa das Frontispiz, das nur von einem privilegierten Standort auf dem ersten Treppenabsatz unverzerrt betrachtet werden kann. Gegenstand dieses Beitrags sind eben diese drei medienkulturellen Europa-Inszenierungen: 1.) eine Sage, 2.) das kartographische Element des Nullmeridians und 3.) Tiepolos Treppenhausgemälde, sie alle verstehe ich als medienkulturelle Übersetzungen Europas. Ziel dieses Beitrags ist es zu fragen, wie diese drei kulturellen Objekte in ihren jeweiligen medialen Modi am Europa-Begriff arbeiten. Dreh- und Angelpunkt ist dabei der Akt des Übersetzens, und zwar sowohl im Sinne einer Umschrift von einem medialen Modus in den anderen als auch als durchaus physisch zu verstehende Bewegung einer Migration zwischen Heimat und Fremde. Ergebnis dieser Betrachtungen ist ein Europa-Begriff, der nicht unproblematisch mit sich selbst identisch ist, sondern sich erst in der Bewegung des Übersetzens konstituiert, also im dritten Raum oder als Bindestrich zwischen den Kulturen.
Assuring global consistency in a cooperative working environment is the main focus of many nowaday research projects in the field of civil engineering and others. In this paper, a new approach based on octrees will be discussed. It will be shown that by the usage of octrees not only the management and control of processes in a network-based working environment can be optimised but also an efficient integration platform for processes from various disciplines – such as architecture and civil engineering – can be provided. By means of an octree-based collision detection resp. consistency assurance a client-server-architecture will be described as well as sophisticated information services for a further support of cooperative work.
Change management has been the focus of different IT systems. These IT systems were developed to represent design information, record design rationale, facilitate design coordination and changes. They are largely based on managing reactive changes, particularly design changes, in which changes are recorded and then propagated to the relevant project members. However, proactive changes are hardly dealt with in IT systems. Proactive changes require estimating the likelihood of occurrence of a change event as well as estimating the degree of change impacts on project parameters. Changes in construction projects often result from the uncertainty associated with the imprecise and vague knowledge of much project information at the early stages of projects. This is a major outcome of the case studies carried out as part of this research. Therefore, the proposed model considers that incomplete knowledge and certain project characteristics are always behind change causes. For proactive changes, predicting a change event is the main task for modelling. The prediction model should strive to integrate these main elements: 1) project characteristics that lead to change 2) causes of change, 3) the likelihood of change occurrence, and 4) the change consequences. It should also define the dependency relationships between these elements. However, limited data (documented) are only available from previous projects for change cases and many of the above elements can only be expressed in linguistic terms. This means that the model will simulate the uncertainty and subjectivity associated with these sets of elements. Therefore, a fuzzy model is proposed in this research to capture these elements. The model analyses the impact of each set of elements on the other by assigning fuzzy values for these elements that express the uncertainty and subjectivity of their impact. The main aim is to predict change events and evaluate change effects on project parameters. The fuzzy model described above was developed in an IT system for operational purposes and was designed as a Java package of components with their supporting classes, beans, and files. This paper describes the development and the architecture of the proposed IT system to achieve these requirements. The system is intended to help project teams in dealing with change causes and then the change consequences in construction projects.
This paper presents the combination of two different parallelization environments, OpenMP and MPI, in one numerical simulation tool. The computation of the system matrices and vectors is parallelized with OpenMP and the solution of the system of equations is done with the MPIbased solver MUMPS. The efficiency of both algorithms is shown on several linear and nonlinear examples using the Finite Element Method and a meshless discretization technique.
Digital maps are very easily applied as route guide maps. Route guide maps are provided through Web or a mobile phone services, and demand for such services is increasing. However, the production of a route guide map requires a great deal of time. Therefore, it is difficult for general users to make route guide maps. The purpose of the present research is the development of a system that can generate a route guide map using the Digital Map 2500 (Spatial Data Framework) published by the Geographical Survey Institute. This system will not require advanced equipment or expert knowledge. Therefore, anyone can produce route guide maps easily and quickly. By using the Digital Map 2500, the time and cost required in order to generate a map are reduced. Moreover, a useful route guide map can be created by simplifying the map form based on the human cognitive map.
This paper describes the concept and experiences of the international Open Distance Learning Course ‘HydroWeb’. This course deals with the introduction of Web-based Collaborative Engineering in standard education programmes of water related engineering and civil engineering based on information sharing. Organized under the umbrella of IAHR and ETNET21 this course is collaboration from several universities from all over the world. Started in 1999 the course demonstrates the potential and innovative opportunities of Web-Technology in education, research and engineering: Students from the different partner universities form small distributed teams to solve a given engineering problem in a time window of two weeks. To overcome the spatial distribution the students apply modern Web technology such as video conferencing, application sharing and document management. All results as well as the final reports are presented as Web document on a shared Web-based project platform (http://www.hydro-web.org). Besides the experiences to apply standard Web tools and working methods based on information sharing instead the conventional information exchange in the daily engineering work the students improve their soft skills operate successfully in international and interdisciplinary project environments as part of the ‘Technical Culture’ of nowadays.
This paper describes the concept, implementation and application of the Web-based Information System ‘Turtle’ for data monitoring, analysis, reporting and management in engineering projects. The system uses a generalised object-oriented approach for information modelling of physical state variables from measurements and simulations by sets of tensor objects and is implemented platform-independently as a Web application. This leads to a more flexible handling of measurement and simulation information in distributed and interdisciplinary engineering projects based on the concept of information sharing. The potential and advantages of Web-based information systems like ‘Turtle’ are described for one selected application example: a measurement programme dealing with the physical limnology of Lake Constance.
The displacements and stresses in arch dams and their abutments are frequently determined with 20-node brick elements. The elements are distorted near the contact plane between the wall and the abutment. A cantilever beam testbed has been developed to investigate the consequences of this distortion. It is shown that the deterioration of the accuracy in the computed stresses is significant. A compatible 18-node wedge element with linear stress variation is developed as an alternative to the brick element. The shape of this element type is readily adapted to the shape of the contact plane. It is shown that the accuracy of the computed stresses in the vicinity of the contact plane is improved significantly by the use of wedge elements.
In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI).
At the start of the conceptual design process, designers start to give tangible form to their thoughts by sketching. This helps with reasoning and communicates ideas to other members of the team. Sketches are gradually worked up into more formal drawings which are then passed to the other stages of the design process. There are however some problems with basing early ideas on sketching. For example, due to their ad-hoc nature, sketches tend only to be diagrammatic representations and so designers cannot be sure that their ideas are feasible and what is being proposed meets the constraints described in the client brief. This can result in designers wasting time working up ideas which prove to be unsuitable. Also the process of constraint checking is complex and time consuming and so designers tend limit their search of possible options and instead choose satisfying rather than good solutions. This paper describes the INTEGRA project which examines the role of sketching in early conceptual design and how this can be linked to other aspects of the process and particularly automated constraint checking using an IT based approach. The focus for the work is the design of framed buildings. A multi-disciplinary approach has been adopted and the work has been undertaken in close collaboration with practising designers and clients.
The method of the finite elements is an adaptable numerical procedure for interpolation as well as for the numerical approximation of solutions of partial differential equations. The basis of these procedure is the formulation of suitable finite elements and element decompositions of the solution space. Classical finite elements are based on triangles or quadrangles in the two-dimensional space and tetrahedron or hexahedron in the threedimensional space. The use of arbitrary-dimensional convex and non-convex polyhedrons as the geometrical basis of finite elements increases the flexibility of generating finite element decompositions substantially and is sometimes the only way to get a clear decomposition...
Gegenstand dieser Arbeit ist es zu zeigen, ob die Anwendung der Methode der Finiten Elemente für die Berechnungen von aussteifenden Wandkonstruktionen in Holzrahmen- bzw. Holztafelbauweise richtige und verallgemeinerbare Ergebnisse liefert und damit: · zur Bemessung von Konstruktionen dienen kann, · die Nachrechnung bestehender Konstruktionen mit von der Norm abweichenden Ausführungsdetails erlaubt und · einen Ersatz für 1:1-Versuche an Wandscheiben darstellt. Die Ergebnisse lassen sich wie folgt zusammenfassen: Unter den derzeitigen Bedingungen stellt die Methode der Berechnung mit Finiten Elementen für die Bemessung von Ein- und Zweirastertafeln, vor allem für die bautechnische Praxis, keine sinnvolle Alternative zu den in den Normen genannten Berechnungsverfahren dar. Für Ein- und Zweirastersysteme sind die Nachweisverfahren der DIN 1052 bzw. des Eurocode 5 ausreichend. Sie können durch das Berechnungsverfahren nach KESSEL sinnvoll ergänzt werden. Die Drucklastverteilung in den Vertikalrippen wird jedoch nur unzureichend erfasst. Für Konstruktionen wie die in dieser Arbeit untersuchte Mehrrastertafel stehen derzeit keine geeigneten Berechnungsverfahren zur Verfügung. Die Anwendbarkeit der FE-Methode für die Nachrechnung bestehender Konstruktionen mit von der Norm abweichenden Konstruktionsdetails konnte in dieser Arbeit nicht nachgewiesen werden. Für die FE-Modellbildung von Wandscheiben des Holzrahmenbaus wurden verschiedenen Detaillösungen gezeigt. Es wurde gezeigt, welche Konstruktionsdetails der Wandscheiben signifikante Auswirkungen auf das Gesamttragverhalten haben. Die FE-Methode kann in der in dieser Arbeit verwendeten Form zur Vorbereitung von Versuchen an 1:1-Modellen dienen und wertvolle Hinweise zum Einfluß verschiedener Konstruktionsdetails auf das Gesamttragverhalten der Wandtafel liefern, um gezielt Veränderungen vornehmen zu können. Insofern stellen Berechnungen mit der FE-Methode eine sinnvolle Ergänzung dar.
The AEC industry is conscious of the potentials arising from the usage of mobile computer systems to increase productivity by streamlining their business processes. Discussions are no longer on whether or not to use a mobile computer solution, but rather, on how it should be used. However, the implantation process of this new technology in Architecture, Engineering and Construction (AEC) and Facility Management (FM) practise is very slow and should be improved. One way to encourage and ease the usage of mobile computer systems in AEC is a more process-oriented usability and context appropriateness of mobile computer solutions. Context-sensitivity is defined as a crucial feature to be taken into account for further research in the area of Mobile Computing. Context-sensitive, mobile IT-solutions depend on two features: (1) flexible definitions of (construction) processes describing the context and (2) tools for flexible, multi-dimensional information management representing the context. It is on this premise that the authors propose the n-dimensional data management approach for the implementation of mobile computing solutions. In this paper, we analyse working scenarios in the AEC and FM sector, defining context aspects which are transformed and formalized as dimension hierarchies of the envisaged context model.
Creation of hierarchical sequence of the plastic and viscoplastic models according to different levels of structure approximations is considered. Developed strategy of multimodel analysis, which consists of creation of the inelastic models library, determination of selection criteria system and caring out of multivariant sequential clarifying computations, is described. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined nonproportional loading.
The research reported in this article was conducted to mainly explore the two common numeric prediction techniques, the model tree and the regression tree, when used in conjunction with bagging as a wrapper method. Bagging is used to improve the prediction accuracy of these two algorithms, and results are compared with the ones obtained earlier by the k-nearest neighbor (KNN) algorithm. From the conducted experiments, both the bagged regression tree and bagged model tree produce better results than not only their corresponding regression tree and model tree alone, but also the KNN with optimal value of k equal to 7. In addition, the bagged model tree yields the lowest prediction errors and a highest correlation coefficient of 0.81. It is demonstrated that it is feasible to use the bagged model tree for engineering applications in prediction problems such as estimating the remaining service life of bridge decks.
Building design in Civil Engineering is characterized by the cooperation of experts in multiple disciplines. Close cooperation of engineers in different fields is the basis of high product quality, short development periods and a minimum of investment costs. For each building the engineers have to create a new fire engineering model. The consistent realization of the fire engineering model in all details has high demands on communication, collaboration and building models. Thereby, to preserve the related design models consistent to each other and compatible with the rules of fire engineering is a complex task. In addition, regulations and guidelines vary according to the building location, so the knowledge base must be integrated dynamically into the planning process. This contribution covers the integration of engineers and design models into a cooperation network on the basis of mobile agents. The distributed models of architectural design, structural planning and fire engineering are supported. These models are implemented as XML-based models which can be accessed by mobile agents for information retrieval and for processing tasks. Agents are provided to all planners, they are enabled to check up the distributed design models with the knowledge base of the fire protection regulations,. With the use of such an agent each planner is supported to check up his planning for accordance with the fire protection requirements. The fire-engineering-agent analyzes the design and detects inconsistencies by processing fire protection requirements and design model facts in a rule-based expert system. The possibility to check the planning information at an early state in the sense of compatibility to the fire protection regulations enables a comprehensive diagnosis of the design and the reduction of planning errors.
The highway product model based on the length information of the centerline, and the application system is developed. This paper shows the schema and the modeling process of the product model, which includes geometric elements such as an alignment, lanes, sidewalks, shoulders and sprits, and accessories such as guard fences, plantings and signs. Furthermore, The Highway Sequence Editor (HSE) is developed as an application system to verify the model.
There are many construction projects in China and mass documents are exchanged among the multi-party, including the owner, the contractor and the engineer in the projects. Based on previous studies, an approach to the utilization of the exchanged documents is established by using data warehouse technology and a prototype system called EXPLYZER is developed. The approach and the prototype system are verified through their application in a construction project. It is concluded that the approach can support the decision-making in project management.
A comprehensive framework of information management system for construction projects in China has been established through extensive literature survey and field investigation. It utilizes the potential information technologies and covers the practical management patterns as well as the major aspects of construction project management. It can be used to guide and evaluate the design of the information management systems for construction projects in order to make the system to be applicable to a wide variety of construction projects and survive the changes in project management.
In this contribution, the design of an analysis environment is presented, that supports an analyst to come to a decision within a gradual collaborative planning process. An analyst represents a project manager, planner or any other person, involved in the planning process. Today, planning processes are managed by several geographically distributed planners and project managers. Thus, complexity of such a process rises even more. Prediction of consequences of many planning decisions is not possible, in particular since assessment of a planning advance is not trivial. There have to be considered several viewpoints, that depend on individual perceptions. In the following, methods are presented to realize planning decision support.