Refine
Document Type
- Conference Proceeding (132) (remove)
Institute
- In Zusammenarbeit mit der Bauhaus-Universität Weimar (92)
- Institut für Strukturmechanik (ISM) (10)
- Professur Baubetrieb und Bauverfahren (7)
- Professur Angewandte Mathematik (6)
- Institut für Konstruktiven Ingenieurbau (IKI) (4)
- Professur Informatik in der Architektur (3)
- Institut für Bauinformatik, Mathematik und Bauphysik (IBMB) (2)
- Professur Bodenmechanik (2)
- Professur Stahlbau (2)
- Professur Tragwerkslehre (2)
Keywords
Year of publication
- 2006 (132) (remove)
In this paper proposed the application of two-parameters damage model, based on non-linear finite element approach, to the analysis of masonry panels. Masonry is treated as a homogenized material, for which the material characteristics can be defined by using homogenization technique. The masonry panels subjected to shear loading are studied by using the proposed procedure within the framework of three-dimensional analyses. The nonlinear behaviour of masonry can be modelled using concepts of damage theory. In this case an adequate damage function is defined for taking into account different response of masonry under tension and compression states. Cracking can, therefore, be interpreted as a local damage effect, defined by the evolution of known material parameters and by one or several functions which control the onset and evolution of damage. The model takes into account all the important aspects which should be considered in the nonlinear analysis of masonry structures such as the effect of stiffness degradation due to mechanical effects and the problem of objectivity of the results with respect to the finite element mesh. Finally the proposed damage model is validated with a comparison with experimental results available in the literature.
Reasonably accurate cost estimation of the structural system is quite desirable at the early stages of the design process of a construction project. However, the numerous interactions among the many cost-variables make the prediction difficult. Artificial neural networks (ANN) and case-based reasoning (CBR) are reported to overcome this difficulty. This paper presents a comparison of CBR and ANN augmented by genetic algorithms (GA) conducted by using spreadsheet simulations. GA was used to determine the optimum weights for the ANN and CBR models. The cost data of twenty-nine actual cases of residential building projects were used as an example application. Two different sets of cases were randomly selected from the data set for training and testing purposes. Prediction rates of 84% in the GA/CBR study and 89% in the GA/ANN study were obtained. The advantages and disadvantages of the two approaches are discussed in the light of the experiments and the findings. It appears that GA/ANN is a more suitable model for this example of cost estimation where the prediction of numerical values is required and only a limited number of cases exist. The integration of GA into CBR and ANN in a spreadsheet format is likely to improve the prediction rates.
Image processing has been much inspired by the human vision, in particular with regard to early vision. The latter refers to the earliest stage of visual processing responsible for the measurement of local structures such as points, lines, edges and textures in order to facilitate subsequent interpretation of these structures in higher stages (known as high level vision) of the human visual system. This low level visual computation is carried out by cells of the primary visual cortex. The receptive field profiles of these cells can be interpreted as the impulse responses of the cells, which are then considered as filters. According to the Gaussian derivative theory, the receptive field profiles of the human visual system can be approximated quite well by derivatives of Gaussians. Two mathematical models suggested for these receptive field profiles are on the one hand the Gabor model and on the other hand the Hermite model which is based on analysis filters of the Hermite transform. The Hermite filters are derivatives of Gaussians, while Gabor filters, which are defined as harmonic modulations of Gaussians, provide a good approximation to these derivatives. It is important to note that, even if the Gabor model is more widely used than the Hermite model, the latter offers some advantages like being an orthogonal basis and having better match to experimental physiological data. In our earlier research both filter models, Gabor and Hermite, have been developed in the framework of Clifford analysis. Clifford analysis offers a direct, elegant and powerful generalization to higher dimension of the theory of holomorphic functions in the complex plane. In this paper we expose the construction of the Hermite and Gabor filters, both in the classical and in the Clifford analysis framework. We also generalize the concept of complex Gaussian derivative filters to the Clifford analysis setting. Moreover, we present further properties of the Clifford-Gabor filters, such as their relationship with other types of Gabor filters and their localization in the spatial and in the frequency domain formalized by the uncertainty principle.
Car following models are used to describe the behavior of a number of cars on the road dependent on the distance to the car in front. We introduce a system of ordinary differential equations and perform a theoretical and numerical analysis in order to find solutions that reflect various traffic situations. We present three different variations of the model motivated by reality.
In this paper we study the structure of the solutions to higher dimensional Dirac type equations generalizing the known λ-hyperholomorphic functions, where λ is a complex parameter. The structure of the solutions to the system of partial differential equations (D- λ) f=0 show a close connection with Bessel functions of first kind with complex argument. The more general system of partial differential equations that is considered in this paper combines Dirac and Euler operators and emphasizes the role of the Bessel functions. However, contrary to the simplest case, one gets now Bessel functions of any arbitrary complex order.
Prozesse im Bauingenieurwesen sind komplex und beinhalten eine große Anzahl verschiedener Aufgaben mit vielen logischen Abhängigkeiten. Basierend auf diesen projektspezifischen Abhängigkeiten wird gewöhnlich ein Bauablaufplan manuell erstellt. In der Regel existieren mehrere Varianten und somit alternative Bauabläufe um ein Projekt zu realisieren. Welche dieser Ausführungsvarianten zur praktischen Anwendung kommt, wird durch den jeweiligen Projektmanager bestimmt. Falls Ä;nderungen oder Störungen während des Bauablaufs auftreten, müssen die davon betroffenen Aufgaben und Abläufe per Hand modifiziert und alternative Aufgaben sowie Abläufe stattdessen ausgeführt werden. Diese Vorgehensweise ist oft sehr aufwändig und teuer. Aktuelle Forschungsansätze beschäftigen sich mit der automatischen Generierung von Bauabläufen. Grundlage sind dabei Aufgaben mit ihren erforderlichen Voraussetzungen und erzeugten Ergebnissen. Im Rahmen dieses Beitrags wird eine Methodik vorgestellt, um Bauabläufe mit Ausführungsvarianten in Form von Workflow-Netzen zu jeder Zeit berechnen zu können. Die vorgestellte Methode wird anhand eines Beispiels aus dem Straßenbau schematisch dargestellt.
Hinsichtlich der Integration einzelner Bauwerkslebensphasen und der verschiedenen Beteiligten, insbesondere innerhalb von Bauplanungs- und Revitalisierungsprozessen, bestehen aktuell entscheidende Defizite. Die generelle Zielstellung der in diesem Beitrag vorgestellten Forschungsarbeiten besteht in der Unterstützung und Verbesserung der Integration durch die disziplin- und lebensphasenübergreifende Bereitstellung sämtlicher bauwerksbezogener Informationen. Dies erfordert einerseits geeignete Ansätze zur Modellierung und Integration der vielfältigen disziplinspezifischen Daten, andererseits geeignete Lösungen, die einen globalen Zugriff, Navigation und Recherche im Gesamtdatenbestand ermöglichen. Die Modellierung und Verwaltung bauwerksbezogener Daten ist seit längerem Gegenstand diverser Forschungsarbeiten. Im Rahmen des SFB 524 wurde ein eigener Ansatz basierend auf einem laufzeitdynamischen Partialmodellverbund entwickelt. Dieser wird in den wesentlichen Grundzügen anderen Ansätzen gegenübergestellt. Den Schwerpunkt dieses Beitrags bildet jedoch die Entwicklung einer geeigneten flexiblen Navigations- und Rechercheschicht zu Realisierung projektglobaler Informationsrecherche. Aus der Sicht der Modellierung und Datenverwaltung wie auch aus der Sicht der Informationsrecherche und Informationspräsentation in Planungsprozessen ergeben sich verschiedene Anforderungen an derartige Recherchewerkzeuge, wobei der wesentlichste Grundsatz maximale Flexibilität hinsichtlich verfügbarer Darstellungstechniken und deren freie Kombination mit Techniken formaler Suchanfragen ist. Das entwickelte Systemkonzept basiert auf einem Framework, welches verschiedene Grundtypen von Recherchemodulen und deren Interaktionsprinzipien vorgibt. Einzelne Recherchemodule werden als Ausprägungen dieser Modultypen realisiert und können je nach Bedarf laufzeitdynamisch in die Navigationsschicht integriert werden. Die technische Realisierung des Systems erfolgt im Umfeld vorhandener Prototypen aus vorangegangenen Forschungsaktivitäten. Dieses technische Umfeld gibt verschiedene Rahmenbedingungen vor, welche im Vorfeld prototypischer Implementierungen verschiedene Adaptionen des generellen Systemkonzepts notwendig machen. Der vorliegende Beitrag stellt den aktuellen Entwicklungsstand der Systemlösung aus konzeptioneller und technischer Sicht sowie erste prototypische Realisierungen von Recherchemodulen vor.
In civil engineering practice, values of column forces are often required before any detailed analysis of the structure has been performed. One of the reasons for this arises from the fast-tracked nature of the majority of construction projects: foundations are laid and base columns constructed whilst analysis and design are still in progress. A need for quick results when feasibility studies are performed or when evaluating the effect of design changes on supporting columns form other situations in which column forces are required, but where a detailed analysis to get these forces seems superfluous. Thus it was concluded that the development of an efficient tool for column force calculations, in which the extensive input required in a finite element analysis is to be avoided, would be highly beneficial. The automation of the process is achieved by making use of a Voronoi diagram. The Voronoi diagram is used a) for subdividing the floor into influence areas and b) as a basis for automatic load assignment. The implemented procedure is integrated into a CAD system in which the relevant geometric information of the floor, i.e. its shape and column layout, can be defined or uploaded. A brief description of the implementation is included. Some comparative results and considerations regarding the continuation of the study are given.
This research focuses on the Case-based Reasoning paradigm in architectural design (CBD) and education. Initial point for further exploring this only seemingly comprehensive investigated field of research constitutes the finding that promising looking concepts exist but that they do not play a role in daily routine of designing architects or in university education. In search of reasons for this limited success a critical review of the CBR approach to architectural education and design was performed. The aim was to identify gaps in the CBD research and to discover potential fields of research within CBR research in architectural education and design to improve acceptance and practical suitability. Two major shortcomings could be identified. In the first place the way retrieval mechanisms of systems under investigation relate to the needs of architectural designers and students. At second: Successful CBD systems rely on the work of third-parties in sharing their experiences with others and filling the databases with relevant cases. Therefore two questions remain unanswered: The question of which projects become part of the database and how get existing projects not only described but evaluated. This is an essential task and prerequisite to meet the requirements of the underlying theory of CBR.
Die meisten Insolvenzen in Deutschland kommen aus der Bauindustrie. Die Gründe hierfür sind vielschichtig, jedoch kann mittels eines modern ausgerichteten M-I-S und Baustellen-Controllings frühzeitig erkannt werden, wie sich die Baustellenergebnisse entwickeln. Hierzu ist es notwendig, dass die Arbeitskalkulation ständig auf dem Laufenden gehalten wird. Nur wenn dies geschieht, sind monatliche Soll-/ Ist-Vergleiche und eine Betrachtung der cost-to-complete möglich und sinnvoll. Eine monatlich rollierende Prognose des Baustellenergebnisses zum Bauende ermöglicht, dass gravierende Veränderungen des Ergebnisses umgehend aufgedeckt werden. Nur in Kenntnis dieser Entwicklungen kann das Management frühzeitig (im Sinne eines Frühwarnsystems) agieren und Steuerungsmaßnahmen ergreifen. Die Ergebnisprognose zum Bauende ist allein als Steuerungsinstrument nicht ausreichend. Die Finanzsituation der Baustelle muß auch regelmäßig geprüft werden, d.h. der Leistungsstand mit der Rechnungsstellung an den Bauherren abgeglichen sowie die unbezahlten Rechnungen des Bauherren überprüft werden. Das beste Prognoseergebnis ist wertlos, wenn der Bauherr seine bezogenen Leistungen nicht vergütet. Die wirtschaftlichen Daten stehen den Verantwortlichen online im Baustellen-Informations-System (B-I-S) zur Verfügung. Ein Ampelsystem verdeutlicht die wirtschaftliche Lage der Baustelle.
We propose a new approach to the numerical solution of quasi-static elastic-plastic problems based on the Moreau-Yosida theorem. After the time discretization, the problem is expressed as an energy minimization problem for unknown displacement and plastic strain fields. The dependency of the minimization functional on the displacement is smooth whereas the dependency on the plastic strain is non-smooth. Besides, there exists an explicit formula, how to calculate the plastic strain from a given displacement field. This allows us to reformulate the original problem as a minimization problem in the displacement only. Using the Moreau-Yosida theorem from the convex analysis, the minimization functional in the displacements turns out to be Frechet-differentiable, although the hidden dependency on the plastic strain is non-differentiable. The seconds derivative exists everywhere apart from the elastic-plastic interface dividing elastic and plastic zones of the continuum. This motivates to implement a Newton-like method, which converges super-linearly as can be observed in our numerical experiments.
The reduction of oscillation amplitudes of structural elements is necessary not only for maintenance of their durability and longevity but also for elimination of a harmful effect of oscillations on people and technology operations. The dampers are widely applied for this purpose. One of the most widespread models of structural friction forces having piecewise linear relation to displacement was analysed. T The author suggests the application of phase trajectories mapping in plane "acceleration – displacement". Unlike the trajectories mapping in a plane "velocity – displacement", they don't require large number of geometrical constructions for identification of the characteristics of dynamic systems. It promotes improving the accuracy. The analytical assumptions had been verified by numerical modeling. The results show good enough coincide between numerical and analytical estimation of dissipative characteristic.
The quaternionic operator calculus can be applied very elegantly to solve many important boundary value problems arising in fluid dynamics and electrodynamics in an analytic way. In order to set up fully explicit solutions. In order to apply the quaternionic operator calculus to solve these types of boundary value problems fully explicitly, one has to evaluate two types of integral operators: the Teodorescu operator and the quaternionic Bergman projector. While the integral kernel of the Teodorescu transform is universal for all domains, the kernel function of the Bergman projector, called the Bergman kernel, depends on the geometry of the domain. Recently the theory of quaternionic holomorphic multiperiodic functions and automorphic forms provided new impulses to set up explicit representation formulas for large classes of hyperbolic polyhedron type domains. These include block shaped domains, wedge shaped domains (with or without additional rectangular restrictions) and circular symmetric finite and infinite cylinders as particular subcases. In this talk we want to give an overview over the recent developments in this direction.
The paper is devoted to the investigation of dynamical behavior of a cable under influence of various types of excitations. Such element has a low rigidity and is sensitive to dynamic effect. The structural scheme is a cable which ends are located at different level. The analysis of dynamical behavior of the cable under effect of kinematical excitation which is represented by the oscillations of the upper part of tower is given. The scheme of cable is accepted such, that lower end of an inclined cable is motionless. The motion of the upper end is assumed only in horizontal direction. The fourth-order Runge-Kutta method was realized in software. The fast Fourier transform was used for spectral analysis. Standard graphical software was adopted for presenting results of investigations. The mathematical model of oscillations of a cable was developed by the account of the viscous damping. The analysis of dynamical characteristics of a cable for various parameters of damping and kinematical excitation was carried out. The time series, spectral characteristics and amplitude-frequencies characteristics was obtained. The resonance amplitude for different oscillating regimes was estimated. It is noted that increasing of the coefficient of the viscous damping and decreasing of the amplitude of tower's oscillations reduces the value of the critical frequency and the resonant amplitudes.
Für die Ausführung des Oberbaus von Verkehrsflächen existiert in Abhängigkeit von projektspezifischen Voraussetzungen eine Vielzahl von verschiedenen Varianten. Aufgrund von Erfahrungen der Projektplaner werden bei ähnlichen Voraussetzungen häufig gleichartige Ausführungsvarianten gewählt. Um eine mögliche Lösungsvariante für den Straßenoberbau zu erhalten, sollten daher nicht nur die gesetzlichen Richtlinien sondern auch bereits beendete Projekte berücksichtigt werden. Im Rahmen eines Wissenschaftlichen Kollegs an der Bauhaus-Universität Weimar wurde die Anwendung des Case-Based Reasoning für die Auswahl von Ausführungsvarianten für den Straßenoberbau untersucht. In diesem Beitrag werden die grundlegenden Konzepte des Case-Based Reasoning und die Bestimmung von ähnlichen Varianten anhand einfacher Beispiele aus dem Straßenoberbau dargestellt.
Procedures of a construction of general solutions for some classes of partial differential equations (PDEs) are proposed and a symmetry operators approach to the raising the orders of the polynomial solutions to linear PDEs are develops. We touch upon an ''operator analytic function theory'' as the solution of a frequent classes of the equations of mathematical physics, when its symmetry operators forms vast enough space. The MAPLE© package programs for the building the operator variables is elaborated also.
This paper presents two new methods for analysis of a technical state of large-panel residential buildings. The first method is based on elements extracted from the classical methods and on data about repairs and modernization collected from building documentations. The technical state of a building is calculated as a sum of several groups of elements defining the technical state. The deterioration in this method depends on: - time, which has passed since last repair of element or time which has passed since construction, - estimate of the state of element groups which can be determined on basis of yearly controls. This is a new unique method. it is easy to use, does not need expertise. The required data could be extracted easily from building documentations. For better accuracy the data from building inspections should be applied (in Poland inspections are made every year). The second method is based on the extracted data processing by means of the artificial neural networks. The aim is to learn the artificial neural network configurations for a set of data containing values of the technical state and information about building repairs for last years (or other information and building parameters) and next to analyse new buildings by the instructed neural network. The second profit from using artificial neural networks is the reduction of number of parameters. Instead of more then 40 parameters describing building, about 6-12 are usually sufficient for satisfactory accuracy. This method could have lower accuracy but it is less prone to data errors.
Analysis of the reinforced concrete chimney geometry changes and their influence on the stresses in the chimney mantle was made. All the changes were introduced to a model chimney and compared. Relations between the stresses in the mantle of the chimney and the deformations determined by the change of the chimney's vertical axis geometry were investigated. The vertical axis of chimney was described by linear function (corresponding to the real rotation of the chimney together with the foundation), and by parabolic function (corresponding to the real dislocation of the chimney under the influence of the horizontal forces - wind). The positive stress pattern in the concrete as well as the negative stress pattern in the reinforcing steel have been presented. The two cases were compared. Analysis of the stress changes in the chimney mantle depending on the modification in the thickness of the mantle (the thickness of the chimney mantle was altered in the linear or the abrupt way) was carried out. The relation between the stresses and the chimney's diameter change from the bottom to the top of the chimney was investigated. All the analyses were conducted by means of a specially developed computer program created in Mathematica environment. The program makes it also possible to control calculations and to visualize the results of the calculations at every stage of the calculation process.
The modeling of crack propagation in plain and reinforced concrete structures is still a field for many researchers. If a macroscopic description of the cohesive cracking process of concrete is applied, generally the Fictitious Crack Model is utilized, where a force transmission over micro cracks is assumed. In the most applications of this concept the cohesive model represents the relation between the normal crack opening and the normal stress, which is mostly defined as an exponential softening function, independently from the shear stresses in tangential direction. The cohesive forces are then calculated only from the normal stresses. By Carol et al. 1997 an improved model was developed using a coupled relation between the normal and shear damage based on an elasto-plastic constitutive formulation. This model is based on a hyperbolic yield surface depending on the normal and the shear stresses and on the tensile and shear strength. This model also represents the effect of shear traction induced crack opening. Due to the elasto-plastic formulation, where the inelastic crack opening is represented by plastic strains, this model is limited for applications with monotonic loading. In order to enable the application for cases with un- and reloading the existing model is extended in this study using a combined plastic-damage formulation, which enables the modeling of crack opening and crack closure. Furthermore the corresponding algorithmic implementation using a return mapping approach is presented and the model is verified by means of several numerical examples. Finally an investigation concerning the identification of the model parameters by means of neural networks is presented. In this analysis an inverse approximation of the model parameters is performed by using a given set of points of the load displacement curves as input values and the model parameters as output terms. It will be shown, that the elasto-plastic model parameters could be identified well with this approach, but require a huge number of simulations.
Mikroelektronik und Mikrosystemtechnik in Kombination mit Informations- und Kommunikations-technik erlauben es mittlerweile, Rechenleistung und Kommunikationsfähigkeit in kleinsten Formaten, mit geringsten Energien und zu günstigen Preisen nutzbringend in unser privates und berufliches Umfeld einzubringen. Beispiele sind Notebook-PC, PDA, Handy und das Navigationßystem im Auto. Aber auch eingebettete Elektronik in Komponenten, Geräten und Systemen ist nunmehr zur Selbstverständlichkeit geworden. Bekannte Beispiele aus der Haustechnik sind Mikroprozeßoren in Heizungs- und Alarmanlagen und aber auch in Komponenten wie Brand- und Bewegungsmelder. Wir nähern uns dem vor einigen Jahren noch als Vision bezeichneten Zustand der überall vorhandenen elektronischen Rechenleistung (engl. ubiquitous computing) bzw. des von Informationsverarbeitung durchdrungenen täglichen Umfelds (engl. pervasive computing). Werden die TGA-Komponenten genau wie die größeren Computerkomponenten (z.B. PCs, Server) über Datenschnittstellen zu räumlich verteilten Netzwerken verknüpft (z.B. Internet, Intranet) und mit einer systemübergreifenden und adäquaten Intelligenz (Software) programmiert, so können neuartige Funktionalitäten im jeweiligen Anwendungsumfeld (engl. ambient intelligence, kurz AmI, [1]) entstehen. Hier liegt bei Gebäuden und Räumen speziell eine große Chance, die bislang einer ganzheitlichen Systemkonzeption unter Einschluß von Architektur, Gebäudephysik, technischer Gebäudeausrüstung (TGA) und Gebäudeautomation (GA) im Wege stehende Gewerketrennung zu überwinden. Es entstehen für div. Anwendungszwecke systemisch integrierte >smart areas< (nach Prof. Becker, FH Biberach). Im vorliegenden Beitrag erläuterte Beispiele für AmI-Lösungen im Immobilienbereich sind Raumsysteme zur automatischen und sicheren Erkennung von Notfällen, z.B. in Pflegeheimen; sich automatisch an die Nutzung und den Nutzer bzgl. Klima und Beleuchtung adaptierende Raumsysteme im Büro- oder Hotelbereich und die elektronische Aßistenz des Bau- und Betriebsprozeßes von Gebäuden. Im Duisburger inHaus-Innovationszentrum für Intelligente Raum- und Gebäudesysteme der Fraunhofer-Gesellschaft wurden in den letzten Jahren erste Lösungen mit diesem neuartigen Ansatz konzipiert, entwickelt und erprobt. Der Beitrag beschreibt nach einer kurzen Skizzierung des Ambient-Intelligence-Ansatzes an Beispielen Möglichkeiten für den Transfer dieser neuen Technologie in den Raum- und Gebäudebereich. Es folgt eine abschließende Zusammenfaßung und eine Einschätzung der Zukunftspotenziale der Ambient Intelligence in Raum und Bau.
We present an algebraically extended 2D image representation in this paper. In order to obtain more degrees of freedom, a 2D image is embedded into a certain geometric algebra. Combining methods of differential geometry, tensor algebra, monogenic signal and quadrature filter, the novel 2D image representation can be derived as the monogenic extension of a curvature tensor. The 2D spherical harmonics are employed as basis functions to construct the algebraically extended 2D image representation. From this representation, the monogenic signal and the monogenic curvature signal for modeling intrinsically one and two dimensional (i1D/i2D) structures are obtained as special cases. Local features of amplitude, phase and orientation can be extracted at the same time in this unique framework. Compared with the related work, our approach has the advantage of simultaneous estimation of local phase and orientation. The main contribution is the rotationally invariant phase estimation, which enables phase-based processing in many computer vision tasks.
For the dynamic behavior of lightweight structures like thin shells and membranes exposed to fluid flow the interaction between the two fields is often essential. Computational fluid-structure interaction provides a tool to predict this interaction and complement or eventually replace expensive experiments. Partitioned analyses techniques enjoy great popularity for the numerical simulation of these interactions. This is due to their computational superiority over simultaneous, i.e. fully coupled monolithic approaches, as they allow the independent use of suitable discretization methods and modular analysis software. We use, for the fluid, GLS stabilized finite elements on a moving domain based on the incompressible instationary Navier-Stokes equations, where the formulation guarantees geometric conservation on the deforming domain. The structure is discretized by nonlinear, three-dimensional shell elements.
Commonly used sequential staggered coupling schemes may exhibit instabilities due to the so-called artificial added mass effect. As best remedy to this problem subiterations should be invoked to guarantee kinematic and dynamic continuity across the fluid-structure interface. Since iterative coupling algorithms are computationally very costly, their convergence rate is very decisive for their usability. To ensure and accelerate the convergence of this iteration the updates of the interface position are relaxed. The time dependent, 'optimal' relaxation parameter is determined automatically without any user-input via exploiting a gradient method or applying an Aitken iteration scheme.
In this paper an adaptive heterogeneous multiscale model, which couples two substructures with different length scales into one numerical model is introduced for the simulation of damage in concrete. In the presented approach the initiation, propagation and coalescence of microcracks is simulated using a mesoscale model, which explicitly represents the heterogeneous material structure of concrete. The mesoscale model is restricted to the damaged parts of the structure, whereas the undamaged regions are simulated on the macroscale. As a result an adaptive enlargement of the mesoscale model during the simulation is necessary. In the first part of the paper the generation of the heterogeneous mesoscopic structure of concrete, the finite element discretization of the mesoscale model, the applied isotropic damage model and the cohesive zone model are briefly introduced. Furthermore the mesoscale simulation of a uniaxial tension test of a concrete prism is presented and own obtained numerical results are compared to experimental results. The second part is focused on the adaptive heterogeneous multiscale approach. Indicators for the model adaptation and for the coupling between the different numerical models will be introduced. The transfer from the macroscale to the mesoscale and the adaptive enlargement of the mesoscale substructure will be presented in detail. A nonlinear simulation of a realistic structure using an adaptive heterogeneous multiscale model is presented at the end of the paper to show the applicability of the proposed approach to large-scale structures.
In engineering science the modeling and numerical analysis of complex systems and relations plays an important role. In order to realize such an investigation, for example a stochastic analysis, in a reasonable computational time, approximation procedure have been developed. A very famous approach is the response surface method, where the relation between input and output quantities is represented for example by global polynomials or local interpolation schemes as Moving Least Squares (MLS). In recent years artificial neural networks (ANN) have been applied as well for such purposes. Recently an adaptive response surface approach for reliability analyses was proposed, which is very efficient concerning the number of expensive limit state function evaluations. Due to the applied simplex interpolation the procedure is limited to small dimensions. In this paper this approach is extended for larger dimensions using combined ANN and MLS response surfaces for evaluating the adaptation criterion with only one set of joined limit state points. As adaptation criterion a combination by using the maximum difference in the conditional probabilities of failure and the maximum difference in the approximated radii is applied. Compared to response surfaces on directional samples or to plain directional sampling the failure probability can be estimated with a much smaller number of limit state points.
Major problems of applying selective sensitivity to system identification are requirement of precise knowledge about the system parameters and realization of the required system of forces. This work presents a procedure which is able to deriving selectively sensitive excitation by iterative experiments. The first step is to determine the selectively sensitive displacement and selectively sensitive force patterns. These values are obtained by introducing the prior information of system parameters into an optimization which minimizes the sensitivities of the structure response with respect to the unselected parameters while keeping the sensitivities with respect to the selected parameters as a constant. In a second step the force pattern is used to derive dynamic loads on the tested structure and measurements are carried out. An automatic control ensures the required excitation forces. In a third step, measured outputs are employed to update the prior information. The strategy is to minimize the difference between a predicted displacement response, formulated as function of the unknown parameters and the measured displacements, and the selectively sensitive displacement calculated in the first step. With the updated values of the parameters a re-analysis of selective sensitivity is performed and the experiment is repeated until the displacement response of the model and the actual structure are conformed. As an illustration a simply supported beam made of steel, vibrated by harmonic excitation is investigated, thereby demonstrating that the adaptive excitation can be obtained efficiently.
The Element-free Galerkin Method has become a very popular tool for the simulation of mechanical problems with moving boundaries. The internally applied Moving Least Squares approximation uses in general Gaussian or cubic weighting functions and has compact support. Due to the approximative character of this method the obtained shape functions do not fulfill the interpolation condition, which causes additional numerical effort for the imposition of the essential boundary conditions. The application of a singular weighting function, which leads to singular coefficient matrices at the nodes, can solve this problem, but requires a very careful placement of the integration points. Special procedures for the handling of such singular matrices were proposed in literature, which require additional numerical effort. In this paper a non-singular weighting function is presented, which leads to an exact fulfillment of the interpolation condition. This weighting function leads to regular values of the weights and the coefficient matrices in the whole interpolation domain even at the nodes. Furthermore this function gives much more stable results for varying size of the influence radius and for strongly distorted nodal arrangements than classical weighting function types. Nevertheless, for practical applications the results are similar as these obtained with the regularized weighting type presented by the authors in previous publications. Finally a new concept will be presented, which enables an efficient analysis of systems with strongly varying node density. In this concept the nodal influence domains are adapted depending on the nodal configuration by interpolating the influence radius for each direction from the distances to the natural neighbor nodes. This approach requires a Voronoi diagram of the domain, which is available in this study since Delaunay triangles are used as integration background cells. In the numerical examples it will be shown, that this method leads to a more uniform and reduced number of influencing nodes for systems with varying node density than the classical circular influence domains, which means that the small additional numerical effort for interpolating the influence radius leads to remarkable reduction of the total numerical cost in a linear analysis while obtaining similar results. For nonlinear calculations this advantage would be even more significant.
In earlier research, generalized multidimensional Hilbert transforms have been constructed in m-dimensional Euclidean space, in the framework of Clifford analysis. Clifford analysis, centred around the notion of monogenic functions, may be regarded as a direct and elegant generalization to higher dimension of the theory of the holomorphic functions in the complex plane. The considered Hilbert transforms, usually obtained as a part of the boundary value of an associated Cauchy transform in m+1 dimensions, might be characterized as isotropic, since the metric in the underlying space is the standard Euclidean one. In this paper we adopt the idea of a so-called anisotropic Clifford setting, which leads to the introduction of a metric dependent m-dimensional Hilbert transform, showing, at least formally, the same properties as the isotropic one. The Hilbert transform being an important tool in signal analysis, this metric dependent setting has the advantage of allowing the adjustment of the co-ordinate system to possible preferential directions in the signals to be analyzed. A striking result to be mentioned is that the associated anisotropic (m+1)-dimensional Cauchy transform is no longer uniquely determined, but may stem from a diversity of (m+1)-dimensional "mother" metrics.
Interactive visualization based on 3D computer graphics nowadays is an indispensable part of any simulation software used in engineering. Nevertheless, the implementation of such visualization software components is often avoided in research projects because it is a challenging and potentially time consuming task. In this contribution, a novel Java framework for the interactive visualization of engineering models is introduced. It supports the task of implementing engineering visualization software by providing adequate program logic as well as high level classes for the visual representation of entities typical for engineering models. The presented framework is built on top of the open source visualization toolkit VTK. In VTK, a visualization model is established by connecting several filter objects in a so called visualization pipeline. Although designing and implementing a good pipeline layout is demanding, VTK does not support the reuse of pipeline layouts directly. Our framework tailors VTK to engineering applications on two levels. On the first level it adds new – engineering model specific – filter classes to VTK. On the second level, ready made pipeline layouts for certain aspects of engineering models are provided. For instance there is a pipeline class for one-dimensional elements like trusses and beams that is capable of showing the elements along with deformations and member forces. In order to facilitate the implementation of a graphical user interface (GUI) for each pipeline class, there exists a reusable Java Swing GUI component that allows the user to configure the appearance of the visualization model. Because of the flexible structure, the framework can be easily adapted and extended to new problem domains. Currently it is used in (i) an object-oriented p-version finite element code for design optimization, (ii) an agent based monitoring system for dam structures and (iii) the simulation of destruction processes by controlled explosives based on multibody dynamics. Application examples from all three domains illustrates that the approach presented is powerful as well as versatile.
The contribution focuses on the development of a basic computational scheme that provides a suitable calculation environment for the coupling of analytical near-field solutions with numerical standard procedures in the far-field of the singularity. The proposed calculation scheme uses classical methods of complex function theory, which can be generalized to 3-dimensional problems by using the framework of hypercomplex analysis. The adapted approach is mainly based on the factorization of the Laplace operator EMBED Equation.3 by the Cauchy-Riemann operator EMBED Equation.3 , where exact solutions of the respective differential equation are constructed by using an orthonormal basis of holomorphic and anti-holomorphic functions.
In classical complex function theory the geometric mapping property of conformality is closely linked with complex differentiability. In contrast to the planar case, in higher dimensions the set of conformal mappings is only the set of Möbius transformations. Unfortunately, the theory of generalized holomorphic functions (by historical reasons they are called monogenic functions) developed on the basis of Clifford algebras does not cover the set of Möbius transformations in higher dimensions, since Möbius transformations are not monogenic. But on the other side, monogenic functions are hypercomplex differentiable functions and the question arises if from this point of view they can still play a special role for other types of 3D-mappings, for instance, for quasi-conformal ones. On the occasion of the 16th IKM 3D-mapping methods based on the application of Bergman's reproducing kernel approach (BKM) have been discussed. Almost all authors working before that with BKM in the Clifford setting were only concerned with the general algebraic and functional analytic background which allows the explicit determination of the kernel in special situations. The main goal of the abovementioned contribution was the numerical experiment by using a Maple software specially developed for that purpose. Since BKM is only one of a great variety of concrete numerical methods developed for mapping problems, our goal is to present a complete different from BKM approach to 3D-mappings. In fact, it is an extension of ideas of L. V. Kantorovich to the 3-dimensional case by using reduced quaternions and some suitable series of powers of a small parameter. Whereas until now in the Clifford case of BKM the recovering of the mapping function itself and its relation to the monogenic kernel function is still an open problem, this approach avoids such difficulties and leads to an approximation by monogenic polynomials depending on that small parameter.
... WITHOUT RIGHT ANGLE.
(2006)
Currently sculptural design is one of the most discussed themes in architecture. Due to their light weight, easy transportation and assembly, as well as an almost unlimited structural variety, parameterised spatial structures are excellently suited for constructive realisation of free formed claddings. They subdivide the continuous surface into a structure of small sized nodes, straight members and plane glass panels. Thus they provide an opportunity to realise arbitrary double-curved claddings with a high degree of transparency, using industrial semi-finished products (steel sections, flat glass). Digital design strategies and a huge number of similar looking but in detail unique structural members demand a continuous digital project handling. Within a research project, named MYLOMESH, a free-formed spatial structure was designed, constructed, fabricated and assembled. All required steps were carried out based on digital data. Different digital connections (scripts) between varying software tools, which are usually not used in the planning process of buildings, were created. They allow a completely digital workflow. The project, its design, meshing, constructive detailing and the above-mentioned scripts are described in this paper.