Refine
Has Fulltext
- yes (15) (remove)
Document Type
- Conference Proceeding (15) (remove)
Keywords
- Optimierung (15) (remove)
We consider an industrial application consisting of the mass minimization of a frame in an injection moulding machine. This frame has to compensate the forces acting on the mould inside the machine and has to fulfill certain critical constraints. The deformation of that frame with constant thickness is described by the plain stress state equations for linear elasticity. If the thickness varies then we use a generalized plain stress state with constant thickness in the coarse grid elements. These direct problems are solved by an adaptive multigrid solver. The mass minimization problem leads to a constrained minimization problem for a non-linear functional which will be solved by some standard optimization algorithm which requires the gradients with respect to design parameters. For the shape optimization problem, we assume that the machine components consist of simple geometrical primitives determined by a few design parameters. Therefore, we calculate the gradient in the shape optimization by means of numerical differentiation which requires the solution of approximately 4 direct problems per design parameter. The adaptive solver guarantees the detection of critical regions automatically, and ensures a good approximation to the exact solution of the direct problem. This rather slow approach can be significantly accelerated by using the adjoint method to express the gradient. It will be combined with a direct implementation of several terms that appear after applying the chain rule to the gradient.
Es wird das gemeine Schema der Projektierung, die die Analyse des Marktes einschließt, betrachtet, die Einschätzung der Nomenklatur und des Umfanges des Produktionsausstoßes der Erzeugnisse, und die Schlüsselaufgabe der Wahl der Regimes der Bearbeitung. Die letzte Aufgabe wird - konkretisiert es werden die Formeln berichtet und die Algorithmen der Optimierung nach den Kriterien der Produktivität und den Selbstkostenpreisen. Es sind die Formeln für die Produktivität der Systeme mit der flexiblen Verbindung, präzisiert sowie die Abhängigkeiten für die Standhaftigkeit bei den kleinen Geschwindigkeiten des Schneidens. Die Schlüsselwörter: der Markt, die Regimes der Bearbeitung, die Produktivität, der Selbstkostenpreis, die Optimierung
We present a software prototype for fluid flow problems in civil engineering, which combines essential features of Computational Steering approaches with efficient methods for model transfer and high performance computing. The main components of the system are described: - The modeler with a focus on the data management of the product model - The pre-processing and the post-processing toolkit - The simulation kernel based on the Lattice Boltzmann method - The required hardware for real-time computing
Um die entsprechende Qualität der ÖPNV zu erreichen, sollte man das Verhältnis zwischen der Bedienungsqualität und dem Kostenaufwand analysieren. In den Bedingungen der anwachsenden Konkurenz aus der Seite der PKW und anderen Fuhrunternehmern soll man die Handlungen, die grösste Effektivität gewährleisten, aufnehmen. Es gibt viele Möglichkeiten die diese Qualität verbessern können, wie z.B. steigernde Frequenz der Fahrzeuge, Vergrößerung der Geschwindigkeit, Pünktlichkeit und Regelmäßigkeit, Einführung der Niederfußfahrzeuge und vieles mehr. Ich versuche in meinem Referat die Aspekte zu analysieren, die mit der Frequenz verbunden sind, d.h. die Erhöhung der Frequenz und das Erhalten der konstanten Häufigkeit der Linienbusse. Das Referat umfasst die Modelle und die Beispiele. In Verbindung mit den Untersuchungen, die die Bereitschaft der Bezahlung für die Verbesserung der Qualität betreffen, kann man schon Entscheidungen treffen, die unterschiedlichen Standard der Fahrt bestimmen.
Current software solutions for real estate planning, construction and use, do not model the complete life cycle of a building. Well-integrated software tools exist for the planning and construction phases. Data integrity exists throughout the planning and construction phases, but problems occur at the transition to the use-phase. At this interface, the complete data set of planning and execution gets lost. Another software deficiency is that current software solutions don’t handle construction work and maintenance work equally. This is why a new software generation is demanded, which continuously covers the entire workflow process from the planning phase to the demolition of a building. New data concepts have to be developed, which allow bringing work items for construction together with work items for real estate use.