Filtern
Dokumenttyp
- Artikel (Wissenschaftlicher) (130) (entfernen)
Institut
- Professur Informatik im Bauwesen (130) (entfernen)
Schlagworte
- Bautechnik (20)
- Produktmodell (19)
- Finite-Elemente-Methode (17)
- Simulation (17)
- Lernendes System (15)
- Mehragentensystem (14)
- Modellierung (13)
- Physikalisches Verfahren (11)
- Bauwerk (9)
- CAD (8)
Multimodel Numerical Analysis of the Elasto-Visco-Plastic Deformation of Materials and Constructions
(1997)
At the present time there is no a generally accepted theory of visco-plasticity which is applicable for a wide class of materials and arbitrary paths of loading. The multimodel approach, based on the creation of hierarchical sequence of the models, is the most rational. The developed library of elasto-visco-plastic models includes both simplest and sophistic models demanding numerous experimental data. A unified general form of constitutive equations for all used elasto-visco-plastic models are presented based upon the concept of tensorial internal state variables. It permits to use unified algorithm of boundary tasks solution for different variants of material models. The developed selection criteria system generates the necessary conditions and provides the choice of the simplest variant of theory sufficient for correct problem solution. Formulation of the selection criteria system is based on peculiarities of viscoplastic materials behavior for the wide range thermomechanical loading and numerous computational experiments with structures different complexity levels. A set of effective schemes of integration stress-strain relations and non-linear finite element system solution are discussed for the considered class of material models. Application possibility of different material models is studied both for material element and for complicated structures. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined loading.
We provide a critical overview of the current status of computational support for construction the management and building performance evaluation in North-America. This overview is based on the research conducted in relation to the design and construction of the Intelligent Workplace (IW), Carnegie Mellon University, Pittsburgh, Pennsylvania, USA. With regard to the commercial software products in the field of construction management the following limitations can be identified: Although project planning, cost estimating and construction simulation are supported, tasks like bidding as well as site and material management have not received the same level of attention. Few project management software packages are integrated in a total design support software system. Little analysis or evaluation options are provided to support managerial decision making. Various research groups address the construction planning and scheduling, construction contracting, site layout generation as well as the integration of these three topics. Currently problems such as efficient material management and calculation of environmental and energy responsive site management are insufficiently addressed within the ongoing research projects. In the domain of building performance simulation and decision support one can notice that, the development and application of computational tools is industry driven. As a result the concerns addressed by the tools are mainly issues pertaining to the selection and sizing of systems and components rather than an integrated performance evaluation. Consequently, these programs are rarely used by building designers, especially in the early design stages, where the predictive capabilities of simulation tools could be of significant value. Although many research institutions address the necessity for the integration of performance simulation within the overall design support environments most of the practically available performance simulation tools still remain mono-dimensional and isolated.
In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures.
Bei der Betrachtung von Stapelproblemen ergibt sich unter anderem folgendes Problem: Ein gegebener Stapel - bestehend aus den Elementen v i der Menge V - soll an anderer Stelle in einer vorgeschriebenen, veränderten Struktur wieder aufgebaut werden. Dazu stehen Hilfsstapelplätze zur Verfügung. Die Optimierung dieses Problems hinsichtlich der Anzahl der benötigten Hilfsstapelplätze ist NP-vollständig. Es werden Erfahrungen mit einem Branch-and-Bound Algorithmus zur Lösung des Problems vorgestellt sowie ein heuristischer Algorithmus diskutiert
Seit mehreren Jahren wird im Fachbereich Gestaltung, Studiengang Innenarchitektur 3D-Computergrafik und -animation in Lehrveranstaltungen ausgebildet und in Projekt- und Diplomarbeiten als Darstellungsmedium angewandt. Eine besondere Herausforderung stellen dabei die 3D-Visualisierungen von historischen Gebäuden dar. Mit den beiden nachfolgenden Beispielen soll der Einsatz und die curricularen Verknüpfung der CA-Technologie mit Studienarbeiten und Projekten zum Thema >Denkmalpflege< aufgezeigt werden. Rekonstruktion und Visualisierung des ehemaligen >Jagdschlosses Platte< bei Wiesbaden. Mit Unterstützung einer Kunsthistorikerin wurde in einer Studienarbeit das im Krieg zerstörte ehemalige Jagdschloß im Computer nachgebildet. Neben der Darstellung des Gebäudeäußeren und des zentralen Innenbereiches wurde eine Animation über die Triangulierung der klassizistischen Geometrie erstellt. Umnutzung historischer Bausubstanz am Beispiel der ehemaligen Klostersanlage >Schiffenberg< bei Gießen. Im Rahmen einer Projektarbeit wurden mehrer Konzepte entwickelt, Entwürfe erstellt und mittels Computeranimationen öffentlich präsentiert. In Kooperation mit dem Studiengang Fernsehtechnik (FH-Wiesbaden) wurde von zwei Studenten eine Videodokumentation über den gesamten Projektverlauf erstellt. Neben dem Aufzeigen der Arbeitsprozesse und dem Vorstellen des Lehrkonzeptes für die curriculare Einbindung der CA-Technologie werden aktuelle Studienergebnisse anhand von Videoprojektionen vorgestellt.
Der Effekt des praktischen Einsatzes von CAD-Systemen im Stahlbau erschöpft sich heute weitgehend in einer Verbesserung der Qualität der Planungsunterlagen und in der Verkürzung der Bearbeitungszeiten. Dabei ist bei schwierigen individuellen Konstruktionen die Einsparung an Arbeitszeit oft nicht sehr markant gegenüber einer traditionellen Arbeitsweise. Die dreidimensionale Erfassung, Speicherung und Verarbeitung von Konstruktionsdaten im Rechner verlangt neben größeren Rechenleistungen neue Verfahren für die Behandlung dieser Daten. Die Möglichkeiten der Automatisierung stahlbautypischer Produktionsvorgänge und einer variablen, computergestützten Planung erfordern wissenschaftlich-technische Betrachtungen des Gesamtproblems. Ausgehend von den Anforderungen des Stahlbaus wird ein neues dreidimensionales Volumenmodell für den rechnergestützten Entwurf und die Konstruktion erarbeitet. Es werden grundlegende Methoden zur Problembehandlung aufgezeigt. Die Methodik basiert im wesentlichen auf der Methode der Inzidenz-Matrizen, um die Beziehungen zwischen topologischen und geometrischen Informationen eines Körpers darzustellen. Die Ermittlung der lokalen Mannigfaltigkeiten wird mit dem Euler-Polyedersatz verglichen und an Beispielen demonstriert. Eine neue Methode zur Ermittlung der lokalen Mannigfaltigkeiten wird dargestellt. Stahlbauspezifische Konstruktionen werden erzeugt und ihre Gestalt nach Anforderungen verändert. Im besonderen werden stahlbauspezifische Ausklinkungen und Verschneidungen erarbeitet und an Beispielen präsentiert.
In the abstract proposed is the Instrumental System of mechanics problems analysis of the deformed solid body. It supplies the researcher with the possibility to describe the input data on the object under analyses and the problem scheme based upon the variational principles within one task. The particular feature of System is possibility to describe the information concerning the object of any geometrical shape and the computation sheme according to the program defined for purpose. The Methods allow to compute the tasks with indefinite functional and indefinite geometry of the object (or the set of objects). The System provides the possibility to compute the tasks with indefinite sheme based upon the Finite Element Method (FEM). The restrictions of the System usage are therefore determined by the restrictions of the FEM itself. It contrast to other known programms using FEM (ANSYS, LS-DYNA and etc) described system possesses more universality in defining input data and choosing computational scheme. Builtin is an original Subsytem of Numerical Result Analuses. It possesses the possibility to visualise all numerical results, build the epures of the unknown variables, etc. The Subsystem is approved while solving two- and three-dimensional problems of Elasticiti and Plasticity, under the conditions of Geometrical Unlinearity. Discused are Contact Problems of Statics and Dynamics.
Der englische Physiker und Mathematiker Roger Penrose hat eine mathematische Pflasterung entdeckt, deren Formenreichtum neue Impulse in der Architektur setzen kann. In der Gemeinde Bütgenbach im Hohen Venn, Belgien, wurde das Verwaltungszentrum durch den Essener Architekten Ernst Burghartz mit mehrereren Penrose-Pflasterungen versehen. Diese beruhen auf einem Computer-Programm, welches der Vortragende zusammen mit Dr. Frank Martini entwickelt hat. Herr Burghartz hat jedoch diesen Vorentwurf nach seinen künstlerischen Vorstellungen abgewandelt.
Bauwerke werden heute mit umfassender Systematik Bauwerke werden heute mit umfassender Systematik die Brauchbarkeit der Bauwerke werden durch Normung und Prüfung intensiv beeinflußt. Der Computereinsatz ist in diesem Bereich allgemein üblich. Im Gegensatz zu Planungs- und Ausführungsphase eines Bauwerks ist die Betriebsphase wenig systematisiert. Dies ist überraschend, da die Betriebsphase über die Lebensdauer eines Bauwerks hinweg wesentlich größere Kosten verursacht, als der Rohbau und da der Nutzen des Bauwerks ja nicht in seiner Errichtung sondern in seinem Betrieb liegt. Die mangelnde Systematik der Bewirtschaftung ist beispielsweise daran ersichtlich, daß es im allgemeinen noch keine brauchbare Dokumentation der Gebäudebewirtschaftung, wenige Normen und wenig Software für diesen Aufgabenbereich gibt.
Unterschiedliche Sichten auf einen Anwendungsbereich drücken sich in unterschiedlich strukturierten Modellen aus. Diese Modelle enthalten im allgemeinen unterschiedliche Arten von Informationen über Objekte ihres Anwendungsbereiches. In diesem Beitrag soll ein Konzept zur Modellintegration beschrieben werden, das die Zusammenführung dieser Informationen gestattet. Im Gegensatz zu traditionellen Methoden des Datenaustauschs, bei dem Objekte des einen Modells in Objekte des anderen Modells konvertiert werden, beruht das Integrationskonzept auf dem Erkennen und dem Verbinden einander äquivalenter Objekte in den Modellen. Als Grundlage zur Beschreibung der Modellschemata wurde die in der ISO 10303-11 spezifizierte konzeptuelle Sprache EXPRESS benutzt. Der Objektzugriff wird durch ein Laufzeitsystem realisiert, das auf der Basis des Standard Data Acces Interface (SDAI ISO 10303-22) entwickelt wurde. Die Modellintegration umfaßt zwei Teilbereiche. Zum einen muß ein Abgleich der verschiedenen Schemata (Schema mapping) erfolgen. Zum anderen müssen Regeln zur Objektidentifikation (Object matching) beschrieben werden. Zur Angabe dieser Integrationsinformationen wurden Strukturen entwickelt. Die in diesen Strukturen abgelegten Beziehungen werden durch das Laufzeitsystem ausgewertet. Durch diese Vorgehensweise lassen sich zum einen alle verfügbaren Informationen über Objekte des Anwendungsbereiches zusammenführen, so daß sie im Gesamtkontext sichtbar werden und bearbeitet werden können. Zum anderen können Inkonsistenzen zwischen den Modellen erkannt und ausgewertet werden.