Das Suchergebnis hat sich seit Ihrer Suchanfrage verändert. Eventuell werden Dokumente in anderer Reihenfolge angezeigt.
  • Treffer 48 von 1015
Zurück zur Trefferliste

Quantification of cracks in concrete thin sections considering current methods of image analysis

  • Image analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, theImage analysis is used in this work to quantify cracks in concrete thin sections via modern image processing. Thin sections were impregnated with a yellow epoxy resin, to increase the contrast between voids and other phases of the concrete. By the means of different steps of pre-processing, machine learning and python scripts, cracks can be quantified in an area of up to 40 cm2. As a result, the crack area, lengths and widths were estimated automatically within a single workflow. Crack patterns caused by freeze-thaw damages were investigated. To compare the inner degradation of the investigated thin sections, the crack density was used. Cracks in the thin sections were measured manually in two different ways for validation of the automatic determined results. On the one hand, the presented work shows that the width of cracks can be determined pixelwise, thus providing the plot of a width distribution. On the other hand, the automatically measured crack length differs in comparison to the manually measured ones.zeige mehrzeige weniger

Volltext Dateien herunterladen

Metadaten exportieren

Weitere Dienste

Teilen auf Twitter Suche bei Google Scholar
Metadaten
Dokumentart:Artikel (Wissenschaftlicher)
Verfasserangaben: Max PatzeltORCiD, Doreen Erfurt, Prof. Dr.-Ing. Horst-Michael LudwigORCiDGND
DOI (Zitierlink):https://doi.org/10.1111/jmi.13091Zitierlink
URN (Zitierlink):https://nbn-resolving.org/urn:nbn:de:gbv:wim2-20220811-46754Zitierlink
URL:https://onlinelibrary.wiley.com/doi/full/10.1111/jmi.13091
Titel des übergeordneten Werkes (Englisch):Journal of Microscopy
Sprache:Englisch
Datum der Veröffentlichung (online):22.07.2022
Datum der Erstveröffentlichung:12.02.2022
Datum der Freischaltung:11.08.2022
Veröffentlichende Institution:Bauhaus-Universität Weimar
Institute und Partnereinrichtugen:Fakultät Bauingenieurwesen / Professur Werkstoffe des Bauens
Jahrgang:2022
Ausgabe / Heft:Volume 286, Issue 2
Seitenzahl:6
Erste Seite:154
Letzte Seite:159
Freies Schlagwort / Tag:concrete; crack; degradation; transmitted light microscopy
GND-Schlagwort:Beton; Rissbildung; Bildanalyse; Maschinelles Lernen; Mikroskopie
DDC-Klassifikation:600 Technik, Medizin, angewandte Wissenschaften
BKL-Klassifikation:56 Bauwesen / 56.45 Baustoffkunde
Lizenz (Deutsch):License Logo Creative Commons 4.0 - Namensnennung-Nicht kommerziell-Keine Bearbeitung (CC BY-NC-ND 4.0)