Cooling Performance of a Novel Circulatory Flow Concentric Multi-Channel Heat Sink with Nanofluids
- Heat rejection from electronic devices such as processors necessitates a high heat removal rate. The present study focuses on liquid-cooled novel heat sink geometry made from four channels (width 4 mm and depth 3.5 mm) configured in a concentric shape with alternate flow passages (slot of 3 mm gap). In this study, the cooling performance of the heat sink was tested under simulated controlledHeat rejection from electronic devices such as processors necessitates a high heat removal rate. The present study focuses on liquid-cooled novel heat sink geometry made from four channels (width 4 mm and depth 3.5 mm) configured in a concentric shape with alternate flow passages (slot of 3 mm gap). In this study, the cooling performance of the heat sink was tested under simulated controlled conditions.The lower bottom surface of the heat sink was heated at a constant heat flux condition based on dissipated power of 50 W and 70 W. The computations were carried out for different volume fractions of nanoparticles, namely 0.5% to 5%, and water as base fluid at a flow rate of 30 to 180 mL/min. The results showed a higher rate of heat rejection from the nanofluid cooled heat sink compared with water. The enhancement in performance was analyzed with the help of a temperature difference of nanofluid outlet temperature and water outlet temperature under similar operating conditions. The enhancement was ~2% for 0.5% volume fraction nanofluids and ~17% for a 5% volume fraction.…
Dokumentart: | Artikel (Wissenschaftlicher) |
---|---|
Verfasserangaben: | Ravindra JilteORCiD, Mohammad Hossein Ahmadi, Ravinder Kumar, Vilas KalamkarORCiD, Dr Amir MosaviORCiD |
DOI (Zitierlink): | https://doi.org/10.3390/nano10040647Zitierlink |
URN (Zitierlink): | https://nbn-resolving.org/urn:nbn:de:gbv:wim2-20200401-41241Zitierlink |
URL: | https://www.mdpi.com/2079-4991/10/4/647 |
Titel des übergeordneten Werkes (Englisch): | Nanomaterials |
Verlag: | MDPI |
Verlagsort: | Basel |
Sprache: | Englisch |
Datum der Veröffentlichung (online): | 31.03.2020 |
Datum der Erstveröffentlichung: | 31.03.2020 |
Datum der Freischaltung: | 01.04.2020 |
Veröffentlichende Institution: | Bauhaus-Universität Weimar |
Institute und Partnereinrichtugen: | Fakultät Bauingenieurwesen / Institut für Strukturmechanik (ISM) |
Jahrgang: | 2020 |
Ausgabe / Heft: | Volume 10, Issue 4, 647 |
Seitenzahl: | 12 |
Freies Schlagwort / Tag: | Machine learning; Nanomaterials; heat sink; nanofluid |
GND-Schlagwort: | Nanostrukturiertes Material; Kühlkörper; Nasskühlung |
DDC-Klassifikation: | 500 Naturwissenschaften und Mathematik / 530 Physik |
BKL-Klassifikation: | 58 Chemische Technik, Umwelttechnik, verschiedene Techno- / 58.11 Mechanische Verfahrenstechnik |
Lizenz (Deutsch): | Creative Commons 4.0 - Namensnennung (CC BY 4.0) |