TY - JFULL A1 - Bee, Julia A1 - Klemstein, Franziska A1 - Hallmann, Lilli A1 - Noeske, Jannik A1 - Bachrach Barzilai, Yael A1 - Bauche, Manuela A1 - Beck, Erik A1 - Logemann, Daniel A1 - Marshall, Danna A1 - Paulus, Jörg A1 - Schlüter, Dorothee A1 - Schubert-Lehnhardt, Viola A1 - Schwoch, Rebecca A1 - Strähle, Volker A1 - Stubenvoll, Kerstin A1 - Victor, Kristin A1 - Wagner, Jens-Christian A1 - Welch Guerra, Max ED - Bee, Julia ED - Hallmann, Lilli ED - Klemstein, Franziska ED - Noeske, Jannik T1 - Auf dem Weg zum Erinnerungsort - das Gebäude der NS-Medizinbürokratie in Weimar N2 - Die Bauhausstraße 11 war in der NS-Zeit Sitz von zahlreichen Institutionen der Gesundheitspolitik. Jetzt ist das Gebäude zum Gegenstand eines Forschungsprojektes geworden, in Zukunft wird auch vor Ort an seine Einbindung in nationalsozialistische Verbrechen erinnert. Dieses Buch dokumentiert und reflektiert die Erinnerungsarbeit auf dem Campus der Bauhaus-Universität Weimar und darüber hinaus. Anhand der interdisziplinären Beiträge wird das Gebäude in der heutigen Bauhausstraße 11 räumlich in Weimar und Thüringen, erinnerungspolitisch aber in einer seit Jahrzehnten erkämpften Landschaft des Gedenkens an nationalsozialistische Verbrechen verortet. KW - Kollektives Gedächtnis KW - Judenvernichtung KW - Nationalsozialismus KW - Gesundheitspolitik KW - Euthanasie KW - Erinnerungskultur KW - Thüringen im Nationalsozialismus KW - Gesundheitsverwaltung im Nationalsozialismus KW - NS-Architektur KW - Denkmalschutz Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231012-64617 ER - TY - JOUR A1 - Alsaad, Hayder A1 - Hartmann, Maria A1 - Voelker, Conrad T1 - The effect of a living wall system designated for greywater treatment on the hygrothermal performance of the facade JF - Energy and Buildings N2 - Besides their multiple known benefits regarding urban microclimate, living walls can be used as decentralized stand-alone systems to treat greywater locally at the buildings. While this offers numerous environmental advantages, it can have a considerable impact on the hygrothermal performance of the facade as such systems involve bringing large quantities of water onto the facade. As it is difficult to represent complex entities such as plants in the typical simulation tools used for heat and moisture transport, this study suggests a new approach to tackle this challenge by coupling two tools: ENVI-Met and Delphin. ENVI-Met was used to simulate the impact of the plants to determine the local environmental parameters at the living wall. Delphin, on the other hand, was used to conduct the hygrothermal simulations using the local parameters calculated by ENVI-Met. Four wall constructions were investigated in this study: an uninsulated brick wall, a precast concrete plate, a sandy limestone wall, and a double-shell wall. The results showed that the living wall improved the U-value, the exterior surface temperature, and the heat flux through the wall. Moreover, the living wall did not increase the risk of moisture in the wall during winter and eliminated the risk of condensation. KW - Feuchteleitung KW - Diffusionswärme KW - Heat transport KW - Moisture transport KW - Living wall KW - Delphin KW - ENVI-Met Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240116-65299 UR - https://www.sciencedirect.com/science/article/pii/S0378778821009956 VL - 2022 IS - volume 255, article 111711 ER - TY - THES A1 - Machacek, Helen T1 - Analyse von Einflussfaktoren des Widerstands feinkörniger Böden bei hydraulischer Belastung N2 - Bisherige Untersuchungen zum hydraulischen Grundbruch im bindigen Baugrund haben gezeigt, dass der Versagensmechanismus durch hydraulisch induzierte Risse ausgelöst wird. Um umströmte Bauwerke im Grundwasser sicher zu dimensionieren, ist daher ein Nachweis gegen hydraulisch induzierte Rissentstehung unerlässlich. Ein solcher existiert bisher jedoch nicht, da die Rissentstehung in bindigen Böden äußerst komplex ist und die zahlreichen Einflussgrößen nicht ausreichend untersucht sind. Aus diesem Grund wurde im Rahmen dieser Dissertation eine Laborstudie zu hydraulisch induzierter Rissbildung in verschiedenen feinkörnigen Böden in einem neuartigen Triaxialversuch durchgeführt. Aus den zahlreichen Versuchsvarianten lassen sich die wichtigsten Einflussgrößen auf den Widerstand des Bodens gegen Rissentstehung ermitteln. Die experimentelle Arbeit wird durch eine numerische Analyse der Versuchsvariationen ergänzt. Daraus lässt sich eine Hypothese zur Rissentstehung in bindigen Böden ableiten, die in Einklang mit der klassischen Bruchmechanik steht. KW - Hydraulischer Grundbruch KW - Bindiger Boden KW - Rissbildung KW - Triaxialversuch KW - Fracking KW - hydraulisch induzierter Riss Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240109-65232 ER - TY - THES A1 - Steffl, Jonas T1 - Business Development and Brand Management – A Reciprocal Relationship N2 - Business development and brand management are core functions of a business that fuel corporate growth and drive value for consumers, for companies, and for society. Integrating the two business areas promises synergistic added value that goes beyond their individual impact spectrums. While academic research has collectively advanced our understanding of brand management, research in business development is relatively underrepresented. As a management concept that is of great importance in the corporate world today, the relevance of business development cannot be denied in academia. Moreover, the interrelationship between business development and brand management has been widely neglected. Both business fields benefit from each other, suggesting an exigency for a deeper integration between the two. Towards that goal, this dissertation presents a comprehensive overview of the reciprocal relationship of business development and brand management that further stretches the academic knowledge space. Throughout the doctoral thesis, the author structures this interrelationship, enhances theory for both business areas and their integration, suggests managerial implications and identifies future research directions that require scholarly attention. The doctoral thesis aims to align business development and brand management theory and practice with the realities of the business world. In three research papers, this thesis develops an analysis of the reciprocal relationship of business development and brand management. For this purpose, a variety of methods ranging from a systematic literature review and qualitative work to empirical research employing structural equation modeling and experimental studies are applied. Theoretically, business development, innovation management, brand management and sustainability inform the frame of this work. Finally, this research project aims at contributing to (sustainable) business and brand growth. KW - Marketing KW - Innovationsmanagement KW - Business Development KW - Brand Management KW - Innovation Management KW - Sustainability Marketing Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240109-65221 ER - TY - THES A1 - Schloth, Sebastian T1 - Beitrag zum Einfluss bogenförmiger Deichlinien mit innenliegenden vollkommenen Dichtungssystemen auf die Grundwasserströmung N2 - Bei einigen bogenförmig verlaufenden Deichlinien ist es erforderlich, die Standsicherheit des Deiches mit Hilfe innenliegender vollkommener Dichtungssysteme zu verbessern. Diese Art der Deichsanierung hat jedoch Auswirkungen auf die Grundwasserströmung. Im Rahmen der wasserrechtlichen Genehmigungsverfahren ist der zu erwartende Aufstau bzw. die Absenkung des Grundwassers darzulegen. Die Zielsetzung dieser Masterarbeit ist es, hierzu einen Beitrag herauszuarbeiten. Dazu werden im ersten Schritt die erforderlichen Grundlagen erläutert. In einem zweiten Schritt werden mit wasserbaulichen/wasserwirtschaftlichen Methoden der Flussverlauf des Rheins in Nordrhein-Westfalen anhand von Kartenmaterial ausgewertet und mögliche Bogenformen ermittelt. Im dritten Schritt werden für diese Bogenformen unter Variation verschiedener Parameter numerische Berechnungen durchgeführt. Die erhaltenen Ergebnisse werden unter Berücksichtigung der vorhandenen analytischen Berechnungsverfahren, mit dem Ziel der Ableitung eines Berechnungsansatzes bzw. von Anwendungsdiagrammen, bewertet. KW - Deich KW - Grundwasserstrom KW - Fließgewässer KW - Numerisches Verfahren KW - Deichlinien KW - Grundwasserströmung KW - Kerndichtung KW - Flussverlauf KW - Wechselwirkungsprozesse Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240104-65186 ER - TY - JOUR A1 - Pollack, Moritz A1 - Lück, Andrea A1 - Wolf, Mario A1 - Kraft, Eckhard A1 - Völker, Conrad T1 - Energy and Business Synergy: Leveraging Biogenic Resources from Agriculture, Waste, and Wastewater in German Rural Areas JF - Sustainability N2 - The imperative to transform current energy provisions is widely acknowledged. However, scant attention has hitherto been directed toward rural municipalities and their innate resources, notably biogenic resources. In this paper, a methodological framework is developed to interconnect resources from waste, wastewater, and agricultural domains for energy utilization. This entails cataloging existing resources, delineating their potential via quantitative assessments utilizing diverse technologies, and encapsulating them in a conceptual model. The formulated models underwent iterative evaluation with engagement from diverse stakeholders. Consequently, 3 main concepts, complemented by 72 sub-concepts, were delineated, all fostering positive contributions to climate protection and providing heat supply in the rural study area. The outcomes’ replicability is underscored by the study area’s generic structure and the employed methodology. Through these inquiries, a framework for the requisite energy transition, with a pronounced emphasis on the coupling of waste, wastewater, and agriculture sectors in rural environments, is robustly analyzed. KW - Energiewende KW - Energieplanung KW - Abfallwirtschaft KW - organischer Abfall KW - Biomasse KW - Regionalentwicklung KW - biogene Abfallstoffe KW - Abwassermanagement KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231222-65172 UR - https://www.mdpi.com/2071-1050/15/24/16573 VL - 2023 IS - volume 15, issue 24, article 16573 SP - 1 EP - 25 PB - MDPI CY - Basel ER - TY - BOOK A1 - Bennke, Johannes T1 - Obliteration. Für eine partikulare Medienphilosophie nach Emmanuel Levinas N2 - Es gibt keine Kreativität ohne Obliteration – also ohne Überschreiben und Entwerten oder Vergessen und Vernichten. Johannes Bennke setzt erstmals die Obliteration ins Zentrum der Medienphilosophie und deckt im Anschluss an Emmanuel Levinas in ihr etwas bildlich Negatives auf. Als Differenzfigur erlangt die Obliteration gestalterische Sprengkraft sowie ethische und epistemologische Relevanz. Über Bildkonjunktionen als genuine Methode der Bildwissenschaft entsteht so eine Theorie der Kunst und eine Philosophie des Medialen nach Levinas, die sedimentierte Wissensformen erschüttert und im Zeichen eines Lebens mit Anderen erneuert. KW - Bildwissenschaft KW - Bildtheorie KW - Lévinas, Emmanuel KW - Medienphilosophie KW - Bild KW - Obliteration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-65009 UR - https://www.transcript-verlag.de/978-3-8376-6791-2/obliteration/ SN - 978-3-8376-6791-2 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Schwenke, Nicolas A1 - Söbke, Heinrich A1 - Kraft, Eckhard T1 - Potentials and Challenges of Chatbot-Supported Thesis Writing: An Autoethnography JF - Trends in Higher Education N2 - The release of the large language model-based chatbot ChatGPT 3.5 in November 2022 has brought considerable attention to the subject of artificial intelligence, not only to the public. From the perspective of higher education, ChatGPT challenges various learning and assessment formats as it significantly reduces the effectiveness of their learning and assessment functionalities. In particular, ChatGPT might be applied to formats that require learners to generate text, such as bachelor theses or student research papers. Accordingly, the research question arises to what extent writing of bachelor theses is still a valid learning and assessment format. Correspondingly, in this exploratory study, the first author was asked to write his bachelor’s thesis exploiting ChatGPT. For tracing the impact of ChatGPT methodically, an autoethnographic approach was used. First, all considerations on the potential use of ChatGPT were documented in logs, and second, all ChatGPT chats were logged. Both logs and chat histories were analyzed and are presented along with the recommendations for students regarding the use of ChatGPT suggested by a common framework. In conclusion, ChatGPT is beneficial for thesis writing during various activities, such as brainstorming, structuring, and text revision. However, there are limitations that arise, e.g., in referencing. Thus, ChatGPT requires continuous validation of the outcomes generated and thus fosters learning. Currently, ChatGPT is valued as a beneficial tool in thesis writing. However, writing a conclusive thesis still requires the learner’s meaningful engagement. Accordingly, writing a thesis is still a valid learning and assessment format. With further releases of ChatGPT, an increase in capabilities is to be expected, and the research question needs to be reevaluated from time to time. KW - Chatbot KW - Künstliche Intelligenz KW - Hochschulbildung KW - AIEd KW - artificial intelligence KW - academic writing KW - ChatGPT KW - education Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-65016 UR - https://www.mdpi.com/2813-4346/2/4/37 VL - 2023 IS - Volume 2, issue 4 SP - 611 EP - 635 PB - MDPI CY - Basel ER - TY - JOUR A1 - Lizarazu, Jorge A1 - Harirchian, Ehsan A1 - Shaik, Umar Arif A1 - Shareef, Mohammed A1 - Antoni-Zdziobek, Annie A1 - Lahmer, Tom T1 - Application of machine learning-based algorithms to predict the stress-strain curves of additively manufactured mild steel out of its microstructural characteristics JF - Results in Engineering N2 - The study presents a Machine Learning (ML)-based framework designed to forecast the stress-strain relationship of arc-direct energy deposited mild steel. Based on microstructural characteristics previously extracted using microscopy and X-ray diffraction, approximately 1000 new parameter sets are generated by applying the Latin Hypercube Sampling Method (LHSM). For each parameter set, a Representative Volume Element (RVE) is synthetically created via Voronoi Tessellation. Input raw data for ML-based algorithms comprises these parameter sets or RVE-images, while output raw data includes their corresponding stress-strain relationships calculated after a Finite Element (FE) procedure. Input data undergoes preprocessing involving standardization, feature selection, and image resizing. Similarly, the stress-strain curves, initially unsuitable for training traditional ML algorithms, are preprocessed using cubic splines and occasionally Principal Component Analysis (PCA). The later part of the study focuses on employing multiple ML algorithms, utilizing two main models. The first model predicts stress-strain curves based on microstructural parameters, while the second model does so solely from RVE images. The most accurate prediction yields a Root Mean Squared Error of around 5 MPa, approximately 1% of the yield stress. This outcome suggests that ML models offer precise and efficient methods for characterizing dual-phase steels, establishing a framework for accurate results in material analysis. KW - Maschinelles Lernen KW - Baustahl KW - Spannungs-Dehnungs-Beziehung KW - Arc-direct energy deposition KW - Mild steel KW - Dual phase steel KW - Stress-strain curve KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-65028 UR - https://www.sciencedirect.com/science/article/pii/S2590123023007144 VL - 2023 IS - Volume 20 (2023) SP - 1 EP - 12 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Bertram, Grischa Frederik A1 - Altrock, Uwe T1 - Jenseits agonistischer Planungstheorien: Die „Normalität“von Protesten und ihr Einfluss auf die Konfliktaustragungin der räumlichen Planung JF - Raumforschung und Raumordnung N2 - Die Planungsforschung hat sich spätestens seit der „kommunikativen Wende“ intensiv damit beschäftigt, wie mit Konflikten umgegangen werden soll und wird. Ansätze der „agonistischen“ Planungstheorie widersprechen der normativen Prämisse, Konsensbildung unter den Planungsbeteiligten anzustreben. Vielmehr wollen sie widerstreitende Positionen normativ für die räumliche Entwicklung fruchtbar machen. Zugleich betonen sie eine vermeintliche Dualität von Planung und Protest, die in der neueren Protesttheorie infrage gestellt wird. Dieser Beitrag zeigt aufbauend auf einer Diskussion von planungs- und protesttheoretischen Ansätzen und einer empirischen Analyse planungsbezogener Proteste in Deutschland, dass diese Proteste von den Planungsakteuren zwar immer stärker als „Normalität“ aufgefasst werden und antagonistische Partizipation trotz zunehmender Konflikthaftigkeit und vermeintlicher Infragestellung der repräsentativen Demokratie kulturell regelgebunden bleibt. Protesthandeln ist Teil ausdifferenzierter „Partizipationsbündel“, die situationsbezogen auch Teilnahme an Beteiligungsverfahren, direktdemokratische Verfahren und Klagen umfassen. Protestierende verfolgen dabei meist eine eher reformorientierte Agenda, die keiner „Zähmung“ bedarf. Allerdings können die zugrunde liegenden Konflikte häufig gar nicht „gelöst“ werden. Planenden hingegen können auch innerhalb eines agonistischen Planungsumfelds rationalistische und deliberative Ansätze zur Verfügung stehen, die sie situationsbezogen und strategisch nutzen. KW - Raumplanung KW - Protest KW - Planungstheorie KW - Konflikt KW - Partizipation KW - Agonismus KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231207-64995 UR - https://rur.oekom.de/index.php/rur/article/view/1674 VL - 2023 IS - Vol. 81, No. 5 SP - 493 EP - 508 PB - oekom Verlag CY - München ER - TY - JOUR A1 - Brokow-Loga, Anton A1 - Krüger, Timmo T1 - Potentials of Climate Emergency Declarations for degrowth transformations. The ambivalent stance of German municipalities in conflicts over a post-fossil future JF - Raumforschung und Raumordnung N2 - This paper addresses the scope for action by municipalities in a climate emergency and places it in the framework of ecomodern (urban) policy. We analyse the way in which two German ‘climate emergency municipalities’ translate conflicts of post-fossil transformation into concrete political and planning strategies. Although more than 2,200 authorities around the world have already declared a climate emergency, research on the impact of these resolutions on the political orientation of municipalities is very limited. Our research focus is on the (potentially agonistic) treatment of conflicts in planning. We argue that in times of a socio-ecological crisis, success in conflict resolution cannot refer to appeasement and depoliticisation. Instead, we propose a framework of five criteria, based on critical theory on ecomodern strategies, planning processes and degrowth. Thus, this practice-related and explorative paper connects empirical insights from the German cities of Constance and Berlin with an innovative normative framework. The findings tell a complex story of an, at least partial, admission of the failure of previous climate mitigation strategies, a lack of social institutions of limits, an instrumental relation to nature and a disregard for social injustices. The paper discusses how municipalities, in the context of ongoing tensions over the post-fossil transformation in Germany, on the one hand hold on to business-as-usual approaches, but on the other hand also set political impulses for change. KW - Stadtentwicklung KW - Wachstumskritik KW - Klimanotstand KW - Degrowth KW - Postwachstum KW - Postwachstumsstadt KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231204-64984 UR - https://rur.oekom.de/index.php/rur/article/view/1666 VL - 2023 IS - Vol. 81, No. 5 SP - 523 EP - 537 PB - oekom Verlag CY - München ER - TY - THES A1 - Schwalbe, Friederike Simone T1 - Die Genese der Thüringer Kunstvereinslandschaft im ausgehenden 19. und frühen 20. Jahrhundert N2 - Zu Beginn des 19. Jahrhunderts existierten in Deutschland noch keine öffentlichen Museen, welche sich der Präsentation von Kunst widmeten und dem zeitgenössischen Kunstschaffen einen Raum bieten konnten. In den Genuss von Malerei und bildender Kunst kamen damit lediglich jene gesellschaftlichen Stände, denen durch Macht, Prestige und Adelszugehörigkeit dieses Privileg zu Teil wurde. Als neue Form des Erwachens der Bourgeoisie entwickelt, repräsentierten die sich im Entstehen befindlichen Kunstvereine erstmalig eine wirkungsvolle, dem Adel den Vormachtanspruch auf Kunst und Kultur entreißende Instanz, welche die Möglichkeit der öffentlichen Kunstvermittlung und Präsentation boten. Zwischen 1860 und 1945 entstand auf dem Gebiet des heutigen Landes Thüringen eine Unzahl an Kunstvereinen, Künstlerbünden und Kunstgesellschaften, welche die Gegenwartskunst und ihre lokalen Künstler förderten. Nach dem Ende des Zweiten Weltkrieges verschwanden diese Förderer jedoch gänzlich von der Bildfläche und ihr Wirken geriet in Vergessenheit. Bisher fand die Vergangenheit dieser Kunstvereine und -bünde nur wenig Aufmerksamkeit in der Kunstgeschichtsbetrachtung. Daher versucht die vorliegende Dissertation die Konstitutionen, Strukturen, die Wirksamkeit und den Einsatz für die (moderne) Kunst von 15 Kunstvereinen, -gesellschaften und Künstlervereinen nachzuzeichnen und damit längst überfällige Erkenntnisse der Beitragsleistung zur Kulturtätigkeit der Institutionen zu erbringen. Das Überblickswerk leistet einen ersten Vorstoß in die noch weithin unbekannten Kunstvereinsgefilde in Thüringen, vor allem auch im Kontext des nationalen Gefüges. Die historische Betrachtung, die Darstellung der Ausstellungspraxis und die finanziellen Handlungsrahmen sollen als direkte Vergleichsansätze die primäre Gegenüberstellung erleichtern. KW - Kunstgeschichte KW - Kunstförderung KW - Thüringen KW - Moderne KW - Jahrhundertwende KW - Kunstvereine KW - Kunstvereinslandschaft KW - Expressionismus Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231121-64870 ER - TY - JFULL A1 - Ainio, Anna A1 - Bartetzky, Arnold A1 - Győrffy, Rachel A1 - Islam, Naslima A1 - Khvadagiani, Irakli A1 - Kibel, Jochen A1 - Landau-Donnelly, Friederike A1 - Leko, Kristina A1 - Lenz, Patricia A1 - Onuoha, Nnenna A1 - Rathjen, Lukas A1 - Reinsch, Natalie A1 - Rykov, Anatol A1 - Tajeri, Niloufar A1 - Ullmanová, Klára ED - Dinççağ Kahveci, Ayşegül ED - Hajdu, Marcell ED - Höhne, Wolfram ED - Jesse, Darja ED - Karpf, Michael ED - Torres Ruiz, Marta T1 - Censored? Conflicted Concepts of Cultural Heritage N2 - Those who ask how social entities relate to the past, enter a field defined by competing interpretations and contested practices of a collectively shared heritage. Dissent and conflict among heritage communities represent productive moments in the negotiation of these varying constructs of the past, identities, and heritage. At the same time, they lead to omissions, the overwriting and amendment of existing constructs. A closer look at all that is suppressed, excluded or rejected opens up new perspectives: It reveals how social groups are formed through public disputes upon the material foundations of heritage constructs. Taking the concept of censorship, the volume engages with the exclusionary and inclusionary mechanisms that underlie the construction of heritage and thus social identities. Censorship is understood here as a discursive strategy in public debates. In current debates, allegations of censorship surface primarily in cases where the handling of a certain heritage constructs is subjected to critical evaluation, or on the contrary, needs to be protected from criticism or even destruction. The authors trace the connection between heritage and identity and show that identity constructs are not only manifested within heritage but are actively negotiated through it. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 4 KW - Kulturerbe KW - Denkmalpflege KW - Architektur KW - Zensur KW - Heritage Studies KW - Cancel Culture KW - Censorship KW - Kulturgeschichte Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230213-49276 SN - 978-3-95773-304-7 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - CHAP A1 - Simon-Ritz, Frank T1 - Der Bibliothek eine Stimme geben: Die Integration von Lobby-Arbeit in den beruflichen Alltag T2 - Praxishandbuch Wissenschaftliche Bibliothekar:innen N2 - Dass Lobby-Arbeit auch für Bibliotheken und damit auch für Bibliothekar:innen unverzichtbar ist, hat sich als Erkenntnis mittlerweile durchgesetzt. Im Folgenden soll – ausgehend von einer kurzen Betrachtung des Stellenwerts der Lobbyarbeit in der bibliothekarischen Verbandsarbeit – aufgezeigt werden, welche Rolle Lobbyaktivitäten im bibliothekarischen Alltag spielen könnten bzw. sollten. KW - Bibliothek KW - Bibliothekspolitik KW - Lobbyismus KW - Bibliotheksrecht KW - Urheberrecht KW - Bibliotheksgesetze KW - Bibliothekarische Verbände KW - Interessenvertretung KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231102-64826 UR - https://www.degruyter.com/document/doi/10.1515/9783110790375-042/html SP - 395 EP - 401 PB - De Gruyter CY - Berlin ER - TY - JOUR A1 - Suhr, Maike T1 - Diversität und (Anti-)Diskriminierung im Kontext journalistischer Neugründungen: Eine Forschungsagenda JF - Global Media Journal German Edition N2 - Obgleich redaktionelle Diversität regelmäßig als eine der Kernherausforderungen für den Journalismus gehandelt wird, tun sich journalistische Organisationen immer noch schwer damit, gleichberechtigte Zugangs-und Entfaltungschancen für Frauen, People of Color, Menschen aus Einwandererfamilien oder auf anderen Ebenen diskriminierungsbetroffene Journalist*innen zu schaffen. Stattdessen zeigt die gender-und diversitätsbezogene Redaktionsforschung, dass Redaktionen nach wie vor in ihren Strukturen, Praktiken und in ihrer Kultur gesellschaftliche Machtverhältnisse widerspiegeln und (re-)produzieren. Doch im Zuge des „Entrepreneurial Journalism“ entstehen heute vielerorts neue Organisationen. Diese journalistischen Neugründungen zeichnen sich unter anderem durch kleinere, offenere und flexiblere Organisationsstrukturen aus. Ihr veränderter organisationaler Charakter wurde jedoch bislang noch nicht tiefergehend im Hinblick auf seine Potenziale und möglichen Risiken für Diversität und (Anti-)Diskriminierung untersucht. Der Beitrag hat somit zum Ziel, journalistische Neugründungen als neuen Gegenstand auf der Agenda der organisations-und diskriminierungsbezogenen Journalismusforschung zu positionieren. Dazu werden ausgewählte Studien zum „Entrepreneurial Journalism“ im Hinblick auf Diversität und (Anti-)Diskriminierung aufgearbeitet und bestehende Desiderata identifiziert. Auf dieser Grundlage wird schließlich eine programmatische Forschungsagenda entwickelt, um empirische Folgeforschung zum Thema anzustoßen. KW - Journalismus KW - Entrepreneurship KW - Vielfalt KW - Diskrimierung KW - Redaktion KW - Neugründung KW - Antidiskriminierung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231027-64836 UR - https://globalmediajournal.de/index.php/gmj/article/view/265 VL - 2023 IS - Volume 13, No 1 SP - 1 EP - 19 ER - TY - JOUR A1 - Partschefeld, Stephan A1 - Tutal, Adrian A1 - Halmanseder, Thomas A1 - Schneider, Jens A1 - Osburg, Andrea T1 - Investigations on Stability of Polycarboxylate Superplasticizers in Alkaline Activators for Geopolymer Binders JF - Materials N2 - Calcined clays are interesting starting materials to be used as SCMs (supplementary cementitious materials) in cements or to be converted to geopolymers by activation with a high alkaline activator. The adjustment of the properties in the fresh state, especially regarding the consistency of these binders, is almost exclusively achieved by the addition of water, since commercially available superplasticizers seem to be ineffective in low-calcium geopolymer systems. The aim of this study was a systematic investigation of various PCE (polycarboxylate ester/ether) superplasticizers (methacrylate ester PCE: MPEG, isoprenol ether PCE: IPEG, methallyl ether PCE: HPEG) with respect to their stability in different alkaline activators (NaOH, KOH, sodium and potassium silicate solutions). The effectiveness of superplasticizers (SPs) in low-calcium geopolymer binders was verified by rheological tests. Size exclusion chromatography was used to investigate if structural degradation of the superplasticizers occurs. The investigated PCE superplasticizers showed a thickening effect in the low-calcium geopolymer system. Depending on the alkalinity of the activator solution, a degradation process was detected for all the PCEs investigated. The side chains of the PCEs are cleaved off the backbone by basic ester and ether hydrolysis. The highest degree of degradation was found in sodium and potassium silicate solutions. In alkaline hydroxide solutions, the degradation process increases with increasing alkalinity. KW - Geopolymere KW - Verflüssigung KW - metakaoline KW - superplasticizer KW - polycarboxylate ether KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231026-64809 UR - https://www.mdpi.com/1996-1944/16/15/5369 VL - 2023 IS - Volume 16, issue 15, article 5369 SP - 1 EP - 14 PB - MDPI CY - Basel ER - TY - BOOK A1 - Siegler, Martin T1 - SOS: Medien des Überlebens. Die existenzielle Bedeutung von Lebenszeichen in Notfällen N2 - SOS-Signale auf hoher See, Klopfzeichen in Trümmerfeldern, Flaschenposten am Strand: Wenn Menschen in Not geraten, müssen sie mit allen Mitteln auf sich aufmerksam machen. Sie müssen Lebenszeichen senden, um am Leben zu bleiben. Dieses Buch erforscht das Phänomen des Lebenszeichens erstmals aus der Perspektive von Medienkulturwissenschaft, Zeichentheorie und Existenzphilosophie. Anhand zahlreicher Katastrophenszenarien wie Erdbeben, Lawinen und Bergwerkunglücken zeigt die Studie, warum Menschen in Not existenziell von Medien und Kommunikationsmitteln abhängen: Keine Lebenszeichen ohne Signalfackeln, Peilsender, Satelliten oder Infrarotsensoren. Medien in Notfällen sind mehr als nur Mittel zur Kommunikation, sie sind Bedingungen menschlicher Existenz. Sie entscheiden, ob und wie sich Leben in Not äußern kann, ob Lebenszeichen Gehör finden und ob Leben gerettet wird. Damit werfen Lebenszeichen ein neues Licht auf die elementaren Bedingungen menschlichen Lebens: Sie zeigen uns, dass Menschen in Not nur überleben, wenn sie mit Artefakten, Netzwerken und Infrastrukturen verbunden sind, die ihre Existenz ermöglichen. KW - Medien KW - Notfall KW - Medienphilosophie KW - Lebenszeichen KW - Notfall KW - Katastrophenfall KW - Kommunikationsmittel KW - Medien KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231026-64816 UR - https://www.degruyter.com/document/doi/10.1515/9783111075341/html SN - 978-3-11-107534-1 PB - De Gruyter CY - Berlin ER - TY - RPRT A1 - Bockelmann, Leo A1 - Frölich-Kulik, Maria T1 - Vogtland – Industriekultur und Zukunft. Perspektiven zum Umgang mit dem industriekulturellen Erbe im Vogtland N2 - Die Broschüre gibt einen Überblick über die angewandten Zugänge und erarbeiteten Ergebnisse aus dem interdisziplinären Forschungsprojekt „Zukunftsindex Heimat und Baukultur 2025" der Professuren Denkmalpflege und Baugeschichte, Landschaftsarchitektur /-planung sowie Sozialwissenschaftliche Stadtforschung, durchgeführt 2021-2023 am Institut für Europäische Urbanistik (IfEU) der Bauhaus Universität Weimar. T3 - IfEU.OPEN - 6 KW - Industriekultur KW - Wahrnehmung KW - Regionalentwicklung KW - Vogtland Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230815-64140 ER - TY - THES A1 - Velte, Jens Walter T1 - Der Schlüssel als Objekt im Wandel der Zeit N2 - In der Welt der Objekte zählt der Schlüssel zu den wichtigsten und ältesten Gebrauchs-gegenständen der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeingültigen Produkts der heutigen Dingwelt in den Fokus gestellt. Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schlüssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien. Auf der Grundlage von strukturierten Daten sollen Maßnahmen für eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verständnis für den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu können. Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verständnis der historischen Untersuchungen, den Erkenntnissen der durchgeführten Studien und einem praxisorientierten Entstehungs-prozess künftige Ideen und Ansätze, eine fortwährende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte förderlich zu betrachten und einsetzen zu können. N2 - In the world of objects, the key is one of humanity's most important and oldest everyday objects. The life and values of civilized cultures are determined by this object. This work focuses on the change in a generally valid product of today's world of things. The objects of the world of things are becoming increasingly dematerialized. The user's relationship with the objects becomes less effective. The central object of the observations and research is the key as an artifact of the real world of things - over time, in relation to the needs of users and the crucial technologies. Based on structured data, measures for user-oriented product design should be demonstrated. Often there is a lack of understanding of the user and their requirements to be able to include them as part of the product development process. The subject of this work is the analysis of user generations in the context of technologies with a view to developing a conceptual design basis. This research work shows how future ideas and approaches, an ongoing and well-founded basis for user-oriented design, can be generated with the understanding of the historical investigations, the findings of the studies carried out and a practice-oriented development process. The aim of the work is to view and use the design of the products beneficially. KW - Schlüssel KW - Design KW - Sicherheit KW - Privatheit KW - Objekt KW - Schlüssel / Objekt KW - Produktentwicklung KW - Product Design KW - Key KW - Privacy Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231020-64798 ER - TY - THES A1 - Wündsch, Charlene T1 - Entrepreneurial Branding: Eine praxistheoretische Analyse markenbildender Strategiepraktiken bei Startups N2 - Gründungsunternehmen stehen vor der Herausforderung, eine unternehmerische Leistung zu entwickeln und gleichzeitig eine Markenidentität aufzubauen. Dabei sind sie mit finanziellen, personellen und strukturellen Besonderheiten konfrontiert, aber auch mit Unbekanntheit und Kundenunsicherheit. Die Dissertation zielt darauf ab, durch die Analyse markenbildender Strategiepraktiken einen Beitrag zur wissenschaftlichen Auseinandersetzung mit der Markenbildung bei Gründungsunternehmen zu leisten und praktische Implikationen für angehende Gründer:innen sowie akademische Startup-Inkubatoren abzuleiten. Der Fokus liegt dabei auf Gründungsvorhaben und Startups in der Vorgründungs- oder frühen Gründungsphase aus dem Hochschulumfeld. Zur Analyse markenbildender Strategiepraktiken wird der Strategy-as-Practice Ansatz (SAP) angewendet. Die qualitative Forschungsmethodik wird genutzt, um Handlungsmuster bestimmter Akteursgruppen in diesem spezifischen Kontext zu rekonstruieren. Beobachtungen, Interviews und Dokumente im Feld dienen als Grundlage für die Forschung. Die Ergebnisse dieser Arbeit liefern umfassende Einblicke in die markenbildende Praxis bei Gründungsunternehmen. Auf Basis dieser Erkenntnisse wurde ein Modell entwickelt, das Komponenten beschreibt, die zusammen einen Handlungsrahmen für die Markenbildung in emergenten Strategiekontexten wie der Unternehmensgründung bilden. Dieses Modell bietet die Möglichkeit, sich vor dem Hintergrund der gründungsspezifischen Rahmenbedingungen mit der Markenentwicklung in der frühen Gründungsphase auseinanderzusetzen und sie systematisch in das Gründungsvorhaben zu implementieren. KW - Entrepreneurship KW - Marke Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231016-64680 ER - TY - THES A1 - Motalebi, Mahgol T1 - Immigrant's Home in the Making through Spatial Practice; The Case of Iranians in Berlin N2 - Due to the significant number of immigrants in Europe, especially Germany, integration is an ongoing subject of debate. Since the 1970s, with the emergence of the discussions on ‘place,’ it has also been realized that the immigrant experience is associated with location. Nevertheless, due to the challenges in capturing the place and migration relevance, there is a gap in understanding the role of the migrant’s geography of experiences and its outcomes (Phillips & Robinson, 2015). This research aims to investigate the extent to which both the process of objective integration and the socio-spatial practices of high-skilled Iranian immigrants in Berlin outline and influence their sense of belonging to Berlin as the new “home.” The embedded mixed-method design had employed for this study. The quantitative analysis through Pearson’s correlation technique measured the strength of the association between Iranians’ settlement distribution and the characteristics of Berlins’ districts. The quantitative analysis provides contextual data to get a greater level of understanding of the case study’s interaction with place. The units of place intend to demonstrate the case study’s presence and possible interaction with places around their settlement location that relatively shapes their perception. The qualitative analysis comprises ethnographic fieldwork and semi-structured in-depth interviews with a homogeneous sample of Iranian immigrants in Berlin that provide data on individual and ethnic behaviors and trajectories and analyze the complex interactions between the immigrant’s experience and the role of place. This research uncovers that Iranian highly skilled immigrants are successful in integrating objectively; However, in regards to their state of belonging, it illustrated the following: The role of socio-ethnic culture of the case study in denotation of home and belonging; Iranian high-skilled immigrants’ efforts towards reaching a level of upward mobility overshadow their attempt to shape social and spatial interaction with Berliners and Berlin itself, which manifests both in their perception and use of urban space; and finally, the identification practice and the boundary-making as an act of reassurance and self-protection against the generalization of adjacent nationalities, demonstrated in the intersection of demographical settlement distribution of Iranians in Berlin and the ethnic diversity, impact the sense of belonging and place-making. KW - Migration KW - Soziale Integration KW - Stadtsoziologie KW - Iranierin KW - Iraner KW - belonging KW - integration KW - Berlin KW - Iranian immigrants KW - Migration KW - Berlin Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230925-64266 ER - TY - THES A1 - Velte, Jens Walter T1 - Der Schlüssel als Objekt im Wandel der Zeit N2 - In der Welt der Objekte zählt der Schlüssel zu den wichtigsten und ältesten Gebrauchs-gegenständen der Menschheit. Das Leben und die Werte der zivilisierten Kulturen werden durch dieses Objekt mitbestimmt. In dieser Arbeit wird der Wandel eines allgemeingültigen Produkts der heutigen Dingwelt in den Fokus gestellt. Zunehmend werden die Objekte der Dingwelt dematerialisiert. Die Beziehung der Nutzer zu den Objekten verliert an Wirkungskraft. Das zentrale Objekt der Beobachtungen und der Forschung ist der Schlüssel als ein Artefakt der realen Dingwelt - im Wandel der Zeit, in Bezug auf die Notwendigkeiten der Nutzer und den ausschlaggebenden Technologien. Auf der Grundlage von strukturierten Daten sollen Maßnahmen für eine nutzerorientierte Produktgestaltung aufgezeigt werden. Oftmals fehlt das entsprechende Verständnis für den Nutzer und dessen Anforderungen, um diese als Teil des Produktentstehungsprozess ein-beziehen zu können. Gegenstand dieser Arbeit ist die Analyse der Nutzer-Generationen im Kontext der Technologien mit Hinblick auf die Erarbeitung einer konzeptionellen Entwurfsbasis. Mit der vorliegenden Forschungsarbeit wird aufgezeigt, wie mit dem Verständnis der historischen Untersuchungen, den Erkenntnissen der durchgeführten Studien und einem praxisorientierten Entstehungs-prozess künftige Ideen und Ansätze, eine fortwährende und fundierte Grundlage der nutzerorientierten Gestaltung generiert werden kann. Die Arbeit verfolgt das Ziel, die Gestaltung der Produkte förderlich zu betrachten und einsetzen zu können. N2 - In the world of objects, the key is one of humanity's most important and oldest everyday objects. The life and values of civilized cultures are determined by this object. This work focuses on the change in a generally valid product of today's world of things. The objects of the world of things are becoming increasingly dematerialized. The user's relationship with the objects becomes less effective. The central object of the observations and research is the key as an artifact of the real world of things - over time, in relation to the needs of users and the crucial technologies. Based on structured data, measures for user-oriented product design should be demonstrated. Often there is a lack of understanding of the user and their requirements to be able to include them as part of the product development process. The subject of this work is the analysis of user generations in the context of technologies with a view to developing a conceptual design basis. This research work shows how future ideas and approaches, an ongoing and well-founded basis for user-oriented design, can be generated with the understanding of the historical investigations, the findings of the studies carried out and a practice-oriented development process. The aim of the work is to view and use the design of the products beneficially. KW - Schlüssel KW - Design KW - Schlüssel KW - Design Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230921-64243 N1 - Fassung mit Druckfehlern zurückgezogen, korrigierte Fassung unter: https://doi.org/10.25643/bauhaus-universitaet.6479 ER - TY - THES A1 - Keller, Enrico T1 - Die Verwaltung von Dienstliegenschaften auf staatlicher Ebene - Über das Wirken ökonomischer Modelle in einem haushaltswirtschaftlichen Umfeld N2 - Diese Arbeit soll einen Beitrag zum Neuen Steuerungsmodell der Öffentlichen Verwaltung auf staatlicher Ebene in Deutschland leisten. Sie dient der Untersuchung zum Aufbau eines ökonomischen Modells zur Koordination von Dienstliegenschaften auf staatlicher Ebene. Die Untersuchung der Dienstliegenschaften zeigt, dass diese eine interne Dienstbarkeit des Staates als Wirtschaftssubjekt an den Staat als Hoheitsträger fingieren. Die Untersuchung der Liegenschaftsverwaltung belegt, dass sie vor allem ein Controlling-Instrument für den Informationsfluss zu Entscheidungen über Dienstliegenschaften zwischen dem Hoheitsträger und dem Wirtschaftssubjekt darstellt. Die Untersuchung der Transaktionskosten beweist, dass eine Koordination am effizientesten über die eigene Organisation mittels dezentraler Aufgabenkonzentration in Form eines SSC erreicht werden kann. Die Untersuchung der Handlungs- und Verfügungsrechte ergab, dass die Verfügungsrechte an den Dienstliegenschaften weiter den Ressorts bzw. Nutzern obliegen. Allein das Handlungsrecht der Aufgabenwahrnehmung ist an die Liegenschaftsverwaltung übergegangen. Die Untersuchung der Prinzipal-Agent-Verhältnisse teilt der Liegenschaftsverwaltung die Rolle eines Erfüllungsgehilfen des Wirtschaftssubjektes zu. Die monetäre Abwicklung der Ge-schäfte zwischen dem Wirtschaftssubjekt und dem Hoheitsträger obliegt als zuarbeitende Organisationseinheit ohne eigene Entscheidungsgewalt der Liegenschaftsverwaltung. Aus diesen Thesen ergeben sich monetäre Handlungsmöglichkeiten, die in den Aufbau des Modells einfließen. Es rückt das Wirtschaftssubjekt als Entscheidungsträger über den Ressourceneinsatz in den Mittelpunkt der Betrachtung. Der Hoheitsträger ist hierbei nur der Forderungsberechtigte an das Wirtschaftssubjekt und die Liegenschaftsverwaltung dessen immobilienwirtschaftlicher Vertreter. Diese Konstellation berücksichtigend erfolgt dem Credo des NPM gemäß die Beschreibung des Modells und des institutionellen Arrangements nach den gängigen Modellen aus der Privatwirtschaft. Anhand der Untersuchungsergebnisse wird eine Liegenschaftsverwaltung skizziert, welche einerseits den tatsächlichen betriebswirtschaftlichen Anforderungen der Immobilienwirtschaft und andererseits den Gegebenheiten des haushaltswirtschaftlichen Umfeldes der öffentlichen Verwaltung gerecht werden kann. Das aufgebaute Realmodell dient gleichzeitig dem Vergleich mit dem bestehenden und in der Praxis angewandten Mieter-Vermieter-Modell als Idealmodell. Der Vergleich zeigt, dass sich aus der Untersuchung zivilrechtlicher Institutionen zwar kein schuldrechtliches, wohl aber ein dingliches Recht ableiten lässt. Damit einher geht die Vermutung, dass es sich bei dem Mieter-Vermieter-Modell im staatlichen Bereich um einen Fall von Modellplatonismus handelt. KW - Neues Steuerungsmodell KW - Facility Management KW - Öffentliche Verwaltung KW - Immobilienmanagement KW - Dienstliegenschaft KW - Public Real Estate Management KW - Haushaltsrecht KW - Betriebswirtschaft KW - Neue Institutionenökonomik KW - New Public Management Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230914-64216 ER - TY - THES A1 - Jeremejewa, Jelena T1 - Der Erfahrung auf der Spur N2 - Dieselbe Zeit, derselbe Raum - zwei, grundverschiedene Regisseure und damit Erfahrungswelten. Aleksandr Rastorguevs und Sergei Loznitsas Dokumentarfilme der 90er und 2000er Jahre sind politische, poetische, punktgenaue Interventionen in die Gegenwart der „kleinen Menschen“. Das Buch widmet sich dokumentarfilmischen Meisterwerken, die methodisch Verdrängtes und Übersehenes, planmäßig Vergessenes sichtbar machen – nach dem Krieg ist vor dem Krieg. Ästhetik in ihrer sozial-, geschichts- und kulturwissenschaftlichen Relevanz. Im post- und kontrafaktischen Zeitalter des allgegenwärtigen medialen Überflusses, inmitten der Fernseh-, YouTube- und virtuellen Realität, erfüllen, begründen, ermöglichen oder schlichtweg erkämpfen die Filme und ihre Autoren verloren gegangene Räume für Widersprüche, Fragen, die mal in ihrer Ambivalenz, mal in ihrer spröden Eindeutigkeit ihren Aussagewert haben. Wider die marginale Rezeption rückt die Publikation sie in den Raum der interdisziplinären wissenschaftlichen Forschung und stellt sie als gleichwertige Formen der Wissens- und Erfahrungsproduktion vor. Bei all ihrer Unterschiedlichkeit, katapultieren die Filme den Zuschauer in ebenjene bekannte, aber nicht erkannte, weil nicht gesehene, übersehene, nicht wahrgenommene Hyperrealität ihrer Alltagswirklichkeit. Weder der Autor noch das Werk noch der Zuschauer sind aus dem jeweiligen historischen oder soziopolitischen Diktum herauslösbar oder gar gänzlich frei. KW - Dokumentarfilm KW - Das @Erhabene KW - Bild KW - Osteuropa KW - Krieg KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230822-64180 SN - ISBN 978-3-95808-423-0 PB - Neofelis CY - Berlin ER - TY - JOUR A1 - Ansari, Meisam A1 - Tartaglione, Fabiola A1 - Könke, Carsten T1 - Experimental Validation of Dynamic Response of Small-Scale Metaconcrete Beams at Resonance Vibration JF - materials N2 - Structures and their components experience substantially large vibration amplitudes at resonance, which can cause their failure. The scope of this study is the utilization of silicone-coated steel balls in concrete as damping aggregates to suppress the resonance vibration. The heavy steel cores oscillate with a frequency close to the resonance frequency of the structure. Due to the phase difference between the vibrations of the cores and the structure, the cores counteract the vibration of the structure. The core-coating inclusions are randomly distributed in concrete similar to standard aggregates. This mixture is referred to as metaconcrete. The main goal of this work is to validate the ability of the inclusions to suppress mechanical vibration through laboratory experiments. For this purpose, two small-scale metaconcrete beams were cast and tested. In a free vibration test, the metaconcrete beams exhibited a larger damping ratio compared to a similar beam cast from conventional concrete. The vibration amplitudes of the metaconcrete beams at resonance were measured with a frequency sweep test. In comparison with the conventional concrete beam, both metaconcrete beams demonstrated smaller vibration amplitudes. Both experiments verified an improvement in the dynamic response of the metaconcrete beams at resonance vibration. KW - Beton KW - metaconcrete KW - Schwingungsdämpfung KW - damping aggregate KW - vibration absorber KW - free vibration test KW - frequency sweep test Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230818-64154 UR - https://www.mdpi.com/1996-1944/16/14/5029 VL - 2023 IS - volume 16, issue 14, article 5029 SP - 1 EP - 17 PB - MDPI CY - Basel ER - TY - THES A1 - Alabassy, Mohamed Said Helmy T1 - Automated Approach for Building Information Modelling of Crack Damages via Image Segmentation and Image-based 3D Reconstruction N2 - As machine vision-based inspection methods in the field of Structural Health Monitoring (SHM) continue to advance, the need for integrating resulting inspection and maintenance data into a centralised building information model for structures notably grows. Consequently, the modelling of found damages based on those images in a streamlined automated manner becomes increasingly important, not just for saving time and money spent on updating the model to include the latest information gathered through each inspection, but also to easily visualise them, provide all stakeholders involved with a comprehensive digital representation containing all the necessary information to fully understand the structure’s current condition, keep track of any progressing deterioration, estimate the reduced load bearing capacity of the damaged element in the model or simulate the propagation of cracks to make well-informed decisions interactively and facilitate maintenance actions that optimally extend the service life of the structure. Though significant progress has been recently made in information modelling of damages, the current devised methods for the geometrical modelling approach are cumbersome and time consuming to implement in a full-scale model. For crack damages, an approach for a feasible automated image-based modelling is proposed utilising neural networks, classical computer vision and computational geometry techniques with the aim of creating valid shapes to be introduced into the information model, including related semantic properties and attributes from inspection data (e.g., width, depth, length, date, etc.). The creation of such models opens the door for further possible uses ranging from more accurate structural analysis possibilities to simulation of damage propagation in model elements, estimating deterioration rates and allows for better documentation, data sharing, and realistic visualisation of damages in a 3D model. KW - Building Information Modeling KW - BIM KW - IFC KW - Damage Information Modelling KW - Cracks Segmentation KW - Cracks 3D Modelling KW - Netscape Internet Foundation Classes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230818-64162 ER - TY - JOUR A1 - Coenen, Ekkehard T1 - Anti-Gewalttrainings, Gewaltwissen und die institutionelle Erzeugung gewaltbefreiter Subjekte JF - Soziale Passagen N2 - Dieser Beitrag fragt danach, wie Wissen über Gewalt in Anti-Gewalttrainings produziert, vermittelt und sozial wirkmächtig wird. Auf Basis des kommunikativen Konstruktivismus werden diese Kurse als gewaltbezogene Institutionen begriffen, in denen eine Wissensordnung der Gewalt stabilisiert wird. Sie sollen Abweichungen von institutionalisierten Wirklichkeitsvorstellungen in Bezug auf Gewalt entgegenwirken. Dabei lassen sie sich als Selbsttechniken begreifen, durch welche die Kursteilnehmer*innen eine spezifische Subjektposition einüben, nämlich die des gewaltbefreiten Subjekts. Vor diesem Hintergrund wird anschließend zwischen konditionalen und konzessiven Anti-Gewalttrainings unterschieden. Erstere wenden sich an Personen, die tatsächlich von der institutionalisierten Wirklichkeitsvorstellung abgewichen sind und somit gesellschaftlich als Gewalttäter*innen eingestuft werden, während Letztere auf eine Klientel zielen, die potenziell von den gängigen Normen abweichen könnte, obwohl noch keine Gewalt aufgetreten sein muss. Abschließend wird gezeigt, dass den Kursleiter*innen eine wichtige Rolle im Subjektivierungsprozess und der Wissenskommunikation über Gewalt zukommt. Neben Wissen über Gewalt werden durch sie auch Wertbindungen, Legitimationen und Weltbilder vermittelt. KW - Gewalt KW - Soziologie KW - Wissenssoziologie KW - Gewaltprävention KW - gewaltbezogene Institution KW - Subjektivierung KW - kommunikativer Konstruktivismus Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230720-64104 UR - https://link.springer.com/article/10.1007/s12592-023-00453-9 VL - 2023 SP - 1 EP - 16 PB - VS, Verl. für Sozialwissenschaften/GWV-Fachverlag CY - Wiesbaden ER - TY - JOUR A1 - Vogel, Albert A1 - Arnold, Jörg A1 - Voelker, Conrad A1 - Kornadt, Oliver T1 - Data for sound pressure level prediction in lightweight constructions caused by structure-borne sound sources and their uncertainties JF - Data in Brief N2 - When predicting sound pressure levels induced by structure-borne sound sources and describing the sound propagation path through the building structure as exactly as possible, it is necessary to characterize the vibration behavior of the structure-borne sound sources. In this investigation, the characterization of structure-borne sound sources was performed using the two-stage method (TSM) described in EN 15657. Four different structure-borne sound sources were characterized and subsequently installed in a lightweight test stand. The resulting sound pressure levels in an adjacent receiving room were measured. In the second step, sound pressure levels were predicted according to EN 12354-5 based on the parameters of the structure-borne sound sources. Subsequently, the predicted and the measured sound pressure levels were compared to obtain reliable statements on the achievable accuracy when using source quantities determined by TSM with this prediction method. KW - Bauakustik KW - Körperschall KW - building acoustics KW - structure-borne sound KW - sound pressure level prediction KW - structure-borne sound sources KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230719-64114 UR - https://www.sciencedirect.com/science/article/pii/S2352340923004110?via%3Dihub VL - 2023 IS - Volume 48, June 2023, article 109292 SP - 1 EP - 16 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Moosbrugger, Jennifer T1 - Design Intelligence - Human-Centered-Design for the development of industrial AI/ML agents N2 - This study deals with design for AI/ML systems, more precisely in the industrial AI context based on case studies from the factory automation field. It therefore touches on core concepts from Human-Centered-Design (HCD), User Experience (UX) and Human Computer Interaction (HCI) on one hand, as well as concepts from Artificial Intelligence (AI), Machine Learning (ML) and the impact of technology on the other. The case studies the research is based on are within the industrial AI domain. However, the final outcomes, the findings, solutions, artifacts and so forth, should be transferable to a wider spectrum of domains. The study’s aim is to examine the role of designers in the age of AI and the factors which are relevant, based on the hypothesis that current AI/ML development lacks the human perspective, which means that there are pitfalls and challenges that design can help resolve. The initial literature review revealed that AI/ML are perceived as a new design material that calls for a new design paradigm. Additional research based on qualitative case study research was conducted to gain an overview of the relevant issues and challenges. From this, 17 themes emerged, which together with explorative expert interviews and a structured literature review, were further analyzed to produce the relevant HCD, UX and HCI themes. It became clear that designers need new processes, methods, and tools in the age of AI/ML in combination with not only design, but also data science and business expertise, which is why the proposed solution in this PhD features process modules for design, data science and business collaboration. There are seven process modules and their related activities and dependencies that serve as guidelines for practitioners who want to design intelligence. A unified framework for collecting use case exemplars was created, based on a workshop with different practitioners and researchers from the area of AI/ML to support and enrich the process modules with concrete projects examples. KW - Künstliche Intelligenz KW - Benutzererlebnis KW - Human-centered Design KW - Datenkompetenz KW - Prozessmodell KW - AI, computational thinking KW - Design, UX, Human-Centered-Design KW - process, tools, methods KW - collaboration KW - Artificial Intelligence Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230719-64098 ER - TY - THES A1 - Torreiter, Laura T1 - Städtebauliche Aufwertung im Leipziger Osten: Migrant:innen als Pioniere beim Erwerb und der Sanierung von Baudenkmalen N2 - Anhand der städtebaulichen und sozialen Transformation des östlichen Gründerzeitgebietes von Leipzig wird die Rolle von migrantischen Hausbesitzenden und in der Bausanierung Tätigen im Aufwertungsprozess untersucht. Der Zugang zum Gegenstand verbindet Fragen der Stadtsoziologie und der Denkmalforschung. Im sozialen Feld der Stadterneuerung wird die Revitalisierung des ehemals von Leerstand und Rückbau betroffenen Baubestandes ausgehandelt. Die Positionen der Akteur:innen im Feld werden durch ihre Ausstattung mit ökonomischem, aber auch sozialem und kulturellem Kapital bestimmt. Angehörige der Planungs- und Denkmalbehörden verfügen über institutionalisiertes Kulturkapital und stehen damit Kleineigentümer:innen, häufig Autodidakt:innen, gegenüber. Baudenkmale können über ihre Funktion als Geldanlage und Wohnraum hinaus Status repräsentieren und symbolisch angeeignet werden. Denkmalschutz dient dem öffentlichen Interesse am Erhalt historischer Bausubstanz. Bei Sanierungen bestehen die Herausforderungen der Vereinbarkeit von Konservierung und Modernisierung, der Finanzierbarkeit für Eigentümer:innen und der Sozialverträglichkeit für Bewohnende. Eine Darstellung der historischen Entwicklung des Leipziger Ostens zu Beginn der Analyse veranschaulicht die Abhängigkeit kultureller, sozialer und ökonomischer Werte des Baubestandes vom jeweiligen gesellschaftlichen Kontext. Planerische Konzepte für das Gebiet zeigen, dass eine sozioökonomische Stabilisierung und Imageverbesserung erreicht werden sollte durch das Aufgreifen von Potentialen, wie den denkmalgeschützten Bauten, dem zuziehenden alternativen Milieu und migrantischer Ökonomie. Es wird deutlich, dass nach einer initialen Ansässigkeit von Pionier:innen die öffentlichen Infrastrukturmaßnahmen und Denkmalausweisungen eine Inwertsetzung v. a. durch externe Anlegende vorbereiteten. Darauf aufbauend wurden anhand einer qualitativen Befragung die Erfahrungen von städtischen Mitarbeitenden, Fachleuten und im Quartier Engagierten denen von lokalen migrantischen Hausbesitzenden und im Bereich Sanierung Tätigen gegenübergestellt. Migrant:innengruppen haben den Stadtraum in einer Phase vorherrschender Abwanderung durch die Eröffnung von Geschäften und Institutionen sowie den Erwerb von Immobilien für sich erschlossen. Strukturelle Benachteiligungen, wie Diskriminierung auf dem Arbeitsmarkt, ihre Ansässigkeit im sozial stigmatisierten Gebiet sowie geringes ökonomisches Kapital versuchten sie durch den Einsatz von sozialem Kapital auszugleichen. Sanierungen erfolgten mit hoher Eigenleistung und Rückgriff auf private Netzwerke. Die Analyse des Erneuerungsprozesses im Leipziger Osten zeigt, dass in einer initialen Phase Pionier:innen von Planenden und der Denkmalpflege als essentiell für die Entwicklung angesehen wurden. Günstige Instandsetzungen durch Kleineigentümer:innen wurden akzeptiert, um Gebäude vor weiterem Verfall zu bewahren. Mit der zunehmenden Forderung nach Verwendung hochwertiger Materialen werden die Sanierungsleistungen nach ästhetischen und letztlich ökonomischen Kriterien bewertet. Gegenüber sozialen Folgen einer Aufwertung von Bausubstanz lässt sich eine unkritische Haltung der Denkmalpflege erkennen. Bei der Vermarktung der Bestände durch professionelle Investierende findet die Sozialgeschichte des Stadtteils wenig Berücksichtigung, positiv besetzte Merkmale des Quartiers, wie Multikulturalität werden selektiv aufgegriffen. Der Anteil migrantischer Akteur:innen an der Entwicklung wird durch die Öffentlichkeit unzureichend anerkannt. Auch die Wertschätzung von Planenden und im Quartier Engagierten erfolgt v. a. anhand des ökonomischen Status. Hohe Erwartungen an die Geschäftsstruktur und die Erscheinung des Straßenbildes können nicht erfüllt werden. Migrantische Hausbesitzende und im Bereich Sanierung Tätige benötigen für die Auseinandersetzung mit der Denkmalpflege kulturelles Kapital. Sie erkennen die Bedeutung des historischen Baubestandes für die Stadt und die Arbeit der Institution an, kritisieren jedoch Sanierungsauflagen bzw. Mitarbeitende der Denkmalpflege und können sich z. T. gegen diese behaupten. Lokale migrantische Kleineigentümer:innen leisten durch ihre Quartiersbindung einen Beitrag zur ökonomischen und sozialen Stabilisierung. Mit ihrer Aufstiegsorientierung fördern sie in der Vermietungspraxis jedoch nur bedingt die Integration anderer Migrant:innen und grenzen sich von statusniedrigen Gruppen im Quartier ab. Migrantische Hausbesitzende und Unternehmende nehmen sich selbst als erfolgreiche Vorreitende in einer heterogener werdenden ostdeutschen Stadtgesellschaft wahr. Sie erkannten frühzeitig das Entwicklungspotential und gehören zu den Initiierenden und Profitierenden der Inwertsetzung. KW - Leipzig KW - Leipziger Osten KW - Stadtentwicklung KW - Baudenkmal KW - Denkmalpflege KW - Migration KW - Einwanderer KW - Migrant Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230717-64081 ER - TY - THES A1 - Mthunzi, Everett T1 - Interactive Surface Environments: Design and Implementation N2 - This dissertation presents three studies on the design and implementation of interactive surface environments. It puts forward approaches to engineering interactive surface prototypes using prevailing methodologies and technologies. The scholarly findings from each study have been condensed into academic manuscripts, which are conferred herewith. The first study identifies a communication gap between engineers of interactive surface systems (i.e., originators of concepts) and future developers. To bridge the gap, it explores a UML-based framework to establish a formal syntax for modeling hardware, middleware, and software of interactive surface prototypes. The proposed framework targets models-as-end-products, towards enabling a shared view of research prototypes thereby facilitating dialogue between concept originators and future developers. The second study positions itself to support developers with an open-source solution for exploiting 3D point clouds for interactive tabletop applications using CPU architectures. Given dense 3D point-cloud representations of tabletop environments, the study aims toward mitigating high computational effort by segmenting candidate interaction regions as a preprocessing step. The study contributes a robust open-source solution for reducing computational costs when leveraging 3D point clouds for interactive tabletop applications. The solution itself is flexible and adaptable to variable interactive surface applications. The third study contributes an archetypal concept for integrating mobile devices as active components in augmented tabletop surfaces. With emphasis on transparent development trails, the study demonstrates the utility of the open-source tool developed in the second study. In addition to leveraging 3D point clouds for real-time interaction, the research considers recent advances in computer vision and wireless communication to realize a modern, interactive tabletop application. A robust strategy that combines spatial augmented reality, point-cloud-based depth perception, CNN-based object detection, and Bluetooth communication is put forward. In addition to seamless communication between adhoc mobile devices and interactive tabletop systems, the archetypal concept demonstrates the benefits of preprocessing point clouds by segmenting candidate interaction regions, as suggested in the second study. Collectively, the studies presented in this dissertation contribute; 1—bridging the gap between originators of interactive surface concepts and future developers, 2— promoting the exploration of 3D point clouds for interactive surface applications using CPU-based architectures, and 3—leveraging 3D point clouds together with emerging CNN-based object detection, and Bluetooth communication technologies to advance existing surface interaction concepts. KW - Mensch-Maschiene-Kommunikation KW - Human-machine communication Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230704-64065 ER - TY - GEN A1 - Kleine, Aya A1 - Calbet i Elias, Laura ED - Calbet i Elias, Laura ED - Vollmer, Lisa ED - Kleine, Aya T1 - Gemeinwohlorientierte Bodennutzung in Kooperation. Ein Handlungsleitfaden für öffentlich-zivielgesellschaftliche Partnerschaften N2 - Dieser Handlungsleitfaden möchte die gemeinwohlorientierte Vergabe von Räumen und Flächen an zivilgesellschaftliche Gruppen stärken. Er ist als Inspirationssammlung zu verstehen, die den Weg zu neuen Kooperationen zwischen öffentlichen und zivilgesellschaftlichen Akteuren erleichtern soll. Wissenswertesund inspirierende Beispiele bieten eine Starthilfe, um nicht nur einzelne stadträumliche Experimente zu wagen, sondern die gemeinwohlorientierte Flächen- und Raumvergabe an zivilgesellschaftliche Gruppen kommunal zu verankern. Denn öffentliche Liegenschaften sind nach vielen Jahren der Privatisierung eine rare Ressource, die umso mehr dem Gemeinwohl dienen sollte. T3 - KoopWohl - Working Paper - 10 KW - Liegenschaftspolitik KW - Boden KW - Gemeinwohl KW - öffentlich-zivilgesellschaftliche Partnerschaft Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230609-63988 ET - Erste Auflage ER - TY - THES A1 - Chawdhury, Samir T1 - Partitioned Algorithms using Vortex Particle Methods for Fluid−Structure Interaction of Thin-walled Flexible Structures N2 - Structures under wind action can exhibit various aeroelastic interaction phenomena, which can lead to destructive and catastrophic events. Such unstable interaction can be beneficially used for small-scale aeroelastic energy harvesting. Proper understanding and prediction of fluid−structure interactions (FSI) phenomena are therefore crucial in many engineering fields. This research intends to develop coupled FSI models to extend the applicability of Vortex Particle Methods (VPM) for numerically analysing the complex FSI of thin-walled flexible structures under steady and fluctuating incoming flows. In this context, the flow around deforming thin bodies is analysed using the two-dimensional and pseudo-three-dimensional implementations of VPM. The structural behaviour is modelled and analysed using the Finite Element Method. The partitioned coupling approach is considered because of the flexibility of using different mathematical procedures for solving fluid and solid mechanics. The developed coupled models are validated with several benchmark FSI problems in the literature. Finally, the models are applied to several fundamental and application field of FSI problems of different thin-walled flexible structures irrespective of their size. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 37 KW - Windenergie KW - Numerisches Verfahren KW - Energieerzeugung KW - Computational wind engineering KW - Aeroelastic instabilities KW - Coupled numerical methods KW - Thin-walled structures KW - Aeroelastic energy harvesting Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230703-64042 UR - https://asw-verlage.de/katalog/partitioned_algorithms_using_vor-2372.html SN - 978-3-95773-297-2 PB - arts + science weimar GmbH CY - Weimar ER - TY - THES A1 - Ashour, Mohammed T1 - Electromechanics and Hydrodynamics of Single Vesicles and Vesicle Doublet Using Phase-Field Isogeometric Analysis N2 - Biomembranes are selectively permeable barriers that separate the internal components of the cell from its surroundings. They have remarkable mechanical behavior which is characterized by many phenomena, but most noticeably their fluid-like in-plane behavior and solid-like out-of-plane behavior. Vesicles have been studied in the context of discrete models, such as Molecular Dynamics, Monte Carlo methods, Dissipative Particle Dynamics, and Brownian Dynamics. Those methods, however, tend to have high computational costs, which limited their uses for studying atomistic details. In order to broaden the scope of this research, we resort to the continuum models, where the atomistic details of the vesicles are neglected, and the focus shifts to the overall morphological evolution. Under the umbrella of continuum models, vesicles morphology has been studied extensively. However, most of those studies were limited to the mechanical response of vesicles by considering only the bending energy and aiming for the solution by minimizing the total energy of the system. Most of the literature is divided between two geometrical representation methods; the sharp interface methods and the diffusive interface methods. Both of those methods track the boundaries and interfaces implicitly. In this research, we focus our attention on solving two non-trivial problems. In the first one, we study a constrained Willmore problem coupled with an electrical field, and in the second one, we investigate the hydrodynamics of a vesicle doublet suspended in an external viscous fluid flow. For the first problem, we solve a constrained Willmore problem coupled with an electrical field using isogeometric analysis to study the morphological evolution of vesicles subjected to static electrical fields. The model comprises two phases, the lipid bilayer, and the electrolyte. This two-phase problem is modeled using the phase-field method, which is a subclass of the diffusive interface methods mentioned earlier. The bending, flexoelectric, and dielectric energies of the model are reformulated using the phase-field parameter. A modified Augmented-Lagrangian (ALM) approach was used to satisfy the constraints while maintaining numerical stability and a relatively large time step. This approach guarantees the satisfaction of the constraints at each time step over the entire temporal domain. In the second problem, we study the hydrodynamics of vesicle doublet suspended in an external viscous fluid flow. Vesicles in this part of the research are also modeled using the phase-field model. The bending energy and energies associated with enforcing the global volume and area are considered. In addition, the local inextensibility condition is ensured by introducing an additional equation to the system. To prevent the vesicles from numerically overlapping, we deploy an interaction energy definition to maintain a short-range repulsion between the vesicles. The fluid flow is modeled using the incompressible Navier-Stokes equations and the vesicle evolution in time is modeled using two advection equations describing the process of advecting each vesicle by the fluid flow. To overcome the velocity-pressure saddle point system, we apply the Residual-Based Variational MultiScale (RBVMS) method to the Navier-Stokes equations and solve the coupled systems using isogeometric analysis. We study vesicle doublet hydrodynamics in shear flow, planar extensional flow, and parabolic flow under various configurations and boundary conditions. The results reveal several interesting points about the electrodynamics and hydrodynamics responses of single vesicles and vesicle doublets. But first, it can be seen that isogeometric analysis as a numerical tool has the ability to model and solve 4th-order PDEs in a primal variational framework at extreme efficiency and accuracy due to the abilities embedded within the NURBS functions without the need to reduce the order of the PDE by creating an intermediate environment. Refinement whether by knot insertion, order increasing or both is far easier to obtain than traditional mesh-based methods. Given the wide variety of phenomena in natural sciences and engineering that are mathematically modeled by high-order PDEs, the isogeometric analysis is among the most robust methods to address such problems as the basis functions can easily attain high global continuity. On the applicational side, we study the vesicle morphological evolution based on the electromechanical liquid-crystal model in 3D settings. This model describing the evolution of vesicles is composed of time-dependent, highly nonlinear, high-order PDEs, which are nontrivial to solve. Solving this problem requires robust numerical methods, such as isogeometric analysis. We concluded that the vesicle tends to deform under increasing magnitudes of electric fields from the original sphere shape to an oblate-like shape. This evolution is affected by many factors and requires fine-tuning of several parameters, mainly the regularization parameter which controls the thickness of the diffusive interface width. But it is most affected by the method used for enforcing the constraints. The penalty method in presence of an electrical field tends to lock on the initial phase-field and prevent any evolution while a modified version of the ALM has proven to be sufficiently stable and accurate to let the phase-field evolve while satisfying the constraints over time at each time step. We show additionally the effect of including the flexoelectric nature of the Biomembranes in the computation and how it affects the shape evolution as well as the effect of having different conductivity ratios. All the examples were solved based on a staggered scheme, which reduces the computational cost significantly. For the second part of the research, we consider vesicle doublet suspended in a shear flow, in a planar extensional flow, and in a parabolic flow. When the vesicle doublet is suspended in a shear flow, it can either slip past each other or slide on top of each other based on the value of the vertical displacement, that is the vertical distance between the center of masses between the two vesicles, and the velocity profile applied. When the vesicle doublet is suspended in a planar extensional flow in a configuration that resembles a junction, the time in which both vesicles separate depends largely on the value of the vertical displacement after displacing as much fluid from between the two vesicles. However, when the vesicles are suspended in a tubular channel with a parabolic fluid flow, they develop a parachute-like shape upon converging towards each other before exiting the computational domain from the predetermined outlets. This shape however is affected largely by the height of the tubular channel in which the vesicle is suspended. The velocity essential boundary conditions are imposed weakly and strongly. The weak implementation of the boundary conditions was used when the velocity profile was defined on the entire boundary, while the strong implementation was used when the velocity profile was defined on a part of the boundary. The strong implementation of the essential boundary conditions was done by selectively applying it to the predetermined set of elements in a parallel-based code. This allowed us to simulate vesicle hydrodynamics in a computational domain with multiple inlets and outlets. We also investigate the hydrodynamics of oblate-like shape vesicles in a parabolic flow. This work has been done in 2D configuration because of the immense computational load resulting from a large number of degrees of freedom, but we are actively seeking to expand it to 3D settings and test a broader set of parameters and geometrical configurations. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2023,1 KW - Isogeometrische Analyse KW - Phasenfeldanalyse KW - Vesikel KW - Hydrodynamik KW - Isogeometric Analysis KW - Phase-Field KW - Vesicles Electromechanics KW - Vesicle Hydrodynamics KW - Vesicle Doublet KW - Elektromechanik KW - Vesikel-Doublette KW - Vesikel Hydrodynamik KW - Vesikel Elektromechanik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230628-64003 ER - TY - THES A1 - Ajjour, Yamen T1 - Addressing Controversial Topics in Search Engines N2 - Search engines are very good at answering queries that look for facts. Still, information needs that concern forming opinions on a controversial topic or making a decision remain a challenge for search engines. Since they are optimized to retrieve satisfying answers, search engines might emphasize a specific stance on a controversial topic in their ranking, amplifying bias in society in an undesired way. Argument retrieval systems support users in forming opinions about controversial topics by retrieving arguments for a given query. In this thesis, we address challenges in argument retrieval systems that concern integrating them in search engines, developing generalizable argument mining approaches, and enabling frame-guided delivery of arguments. Adapting argument retrieval systems to search engines should start by identifying and analyzing information needs that look for arguments. To identify questions that look for arguments we develop a two-step annotation scheme that first identifies whether the context of a question is controversial, and if so, assigns it one of several question types: factual, method, and argumentative. Using this annotation scheme, we create a question dataset from the logs of a major search engine and use it to analyze the characteristics of argumentative questions. The analysis shows that the proportion of argumentative questions on controversial topics is substantial and that they mainly ask for reasons and predictions. The dataset is further used to develop a classifier to uniquely map questions to the question types, reaching a convincing F1-score of 0.78. While the web offers an invaluable source of argumentative content to respond to argumentative questions, it is characterized by multiple genres (e.g., news articles and social fora). Exploiting the web as a source of arguments relies on developing argument mining approaches that generalize over genre. To this end, we approach the problem of how to extract argument units in a genre-robust way. Our experiments on argument unit segmentation show that transfer across genres is rather hard to achieve using existing sequence-to-sequence models. Another property of text which argument mining approaches should generalize over is topic. Since new topics appear daily on which argument mining approaches are not trained, argument mining approaches should be developed in a topic-generalizable way. Towards this goal, we analyze the coverage of 31 argument corpora across topics using three topic ontologies. The analysis shows that the topics covered by existing argument corpora are biased toward a small subset of easily accessible controversial topics, hinting at the inability of existing approaches to generalize across topics. In addition to corpus construction standards, fostering topic generalizability requires a careful formulation of argument mining tasks. Same side stance classification is a reformulation of stance classification that makes it less dependent on the topic. First experiments on this task show promising results in generalizing across topics. To be effective at persuading their audience, users of an argument retrieval system should select arguments from the retrieved results based on what frame they emphasize of a controversial topic. An open challenge is to develop an approach to identify the frames of an argument. To this end, we define a frame as a subset of arguments that share an aspect. We operationalize this model via an approach that identifies and removes the topic of arguments before clustering them into frames. We evaluate the approach on a dataset that covers 12,326 frames and show that identifying the topic of an argument and removing it helps to identify its frames. KW - Informatik KW - Suchmaschine KW - Argumentation KW - Internet KW - argumentation KW - controversial topics KW - natural language processing KW - search engines Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230626-64037 ER - TY - THES A1 - Lenz, Juliane T1 - „Bausünde“ oder Denkmal? Zur Diskussion über den Umgang mit verschmähten Bauwerken N2 - Für die einen also „Bausünde“, für die anderen ein erhaltenswertes Bauwerk – wie geht man damit um? Für wen gilt wann etwas als „Bausünde“ und wann als erhaltenswert, welche Ziele werden damit verfolgt und Konzepte aufgezeigt? Inwieweit spielen beispielsweise Aspekte wie Ästhetik, Funktionalität oder der allgemeine gesellschaftliche Kontext bzw. Wandel sowie das jeweils aktuelle und bauzeitliche planerische Leitbild bzw. Verständnis eine Rolle bei der Verwendung des Begriffs und den Umgang für konkrete Bauwerke? Und inwieweit steht der Erhaltungswert bzw. eine Denkmalwürdigkeit damit im Verhältnis und wie kann damit planerisch umgegangen werden? Der Diskussion über den Umgang mit verschmähten Bauwerken will sich die vorliegende Abschlussarbeit nähern. Als Bauwerke werden hierbei sowohl Gebäude und Plätze als auch zur Erinnerung gesetzte Objekte wie Statuen verstanden. T3 - IfEU.OPEN - 5 KW - Denkmalpflege KW - Denkmal Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230606-63979 ER - TY - RPRT A1 - Zanders, Theresa T1 - Teilhabe an Gesundheitsversorgung von aufenthaltsrechtlich illegalisierten Menschen in Deutschland N2 - Die Gesundheitsversorgung in Deutschland ist seit den Bismarckschen Sozialreformen ein zunehmend institutionalisierter Teil der staatlichen Daseinsvorsorge im wohlfahrtsstaatlichen Gefüge. Institutionalisiert ist die Gesundheitsversorgung in korporatistischer Logik, das heißt in kooperativen Beziehungen zum privatwirtschaftlichen und zivilgesellschaftlichen Sektor und mit Befugnissen der Selbstverwaltung. Zudem fußt das Gesundheitssystem auf einem Versicherungssystem mit lohnabhängigen Abgaben. Institutionalisiert ist die staatliche Daseinsvorsorge jedoch auch in seinen Ausschlüssen. So werden Menschen ohne Bürgerrechte von vielen sozialen Rechten, wie von der Gesundheitsversorgung, ausgeschlossen, obwohl dieser Ausschluss im Widerspruch zu anderen konstitutiven Elementen des Nationalstaats steht. In diesem Working Paper werden die grundlegende Strukturen des deutschen Gesundheitssystems und darin innewohnende Funktionslogiken der Produktion von Teilhabe dargestellt. Abschließend werden in Anlehnung an Kronauer die verschiedenen Dimensionen von Teilhabe an Gesundheitsversorgung in ihrer Produktions- und Ausschlusslogik im Wohlfahrtsregime dargelegt dabei auf die Gruppe der aufenthaltsrechtlich Illegalisierten fokussiert, denen gesellschaftliche Teilhabe in vielen Lebensbereichen, wie auch stark im Gesundheitsbereich, untersagt wird. Gleichzeitig soll dargestellt werden, wie zivilgesellschaftliche Akteur*innen auch gegen staatliche Vorgaben oder Anreize, Teilhabe (wieder-)herstellen. T3 - KoopWohl - Working Paper - 3 KW - Gesundheit KW - Migration KW - Anonymer Krankenschein Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230530-63968 ER - TY - RPRT A1 - Raab, Susanna T1 - Ernährungsgerechtigkeit im deutschen Wohlfahrtsregime. Teilhabe und Ausschlüsse N2 - Ernährung bestimmt unser tägliches Leben. Sie erfüllt in erster Linie die physiologische Notwendigkeit unseren Körper am Leben zu halten und ist gleichzeitig Alltagspraxis, durch welche gesamtgesellschaftliche Strukturen sichtbar werden. Innerhalb dieser Alltagspraxen erfüllt Ernährung vor allem eine wichtige Funktion in der Herstellung gesellschaftlicher Teilhabe oder kann strukturelle Ausschlüsse und soziale Ungleichheit bedingen. Dem Wohlfahrtsregime kommt somit eine wichtige Aufgabe in der Grundversorgung der Bevölkerung zu und muss innerhalb der Daseinsvorsorge auf Ausschlüsse von ernährungsbezogener Teilhabe einzelner Bevölkerungsschichten eingehen und sozialer Ungleichheit entgegenwirken. In diesem Working Paper soll der Fragestellung nachgegangen werden, inwiefern Teilhabe bzw. strukturelle Ausschlüsse von Ernährung innerhalb des bundesdeutschen Wohlfahrtsregimes hergestellt werden und durch welche politischen Praktiken und Forderungen aus der Zivilgesellschaft bzw. sozialen Bewegungen ernährungsvermittelte Teilhabe (wieder) hergestellt wird. T3 - KoopWohl - Working Paper - 2 KW - Ernährung KW - Wohlfahrtsregime KW - Ernährungsgerechtigkeit Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230530-63952 ER - TY - JOUR A1 - Abdelnour, Mena A1 - Zabel, Volkmar T1 - Modal identification of structures with a dynamic behaviour characterised by global and local modes at close frequencies JF - Acta Mechanica N2 - Identification of modal parameters of a space frame structure is a complex assignment due to a large number of degrees of freedom, close natural frequencies, and different vibrating mechanisms. Research has been carried out on the modal identification of rather simple truss structures. So far, less attention has been given to complex three-dimensional truss structures. This work develops a vibration-based methodology for determining modal information of three-dimensional space truss structures. The method uses a relatively complex space truss structure for its verification. Numerical modelling of the system gives modal information about the expected vibration behaviour. The identification process involves closely spaced modes that are characterised by local and global vibration mechanisms. To distinguish between local and global vibrations of the system, modal strain energies are used as an indicator. The experimental validation, which incorporated a modal analysis employing the stochastic subspace identification method, has confirmed that considering relatively high model orders is required to identify specific mode shapes. Especially in the case of the determination of local deformation modes of space truss members, higher model orders have to be taken into account than in the modal identification of most other types of structures. KW - Fachwerkbau KW - Holzkonstruktion KW - Schwingung KW - three-dimensional truss structures KW - vibration-based methodology KW - numerical modelling Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230525-63822 UR - https://link.springer.com/article/10.1007/s00707-023-03598-z VL - 2023 SP - 1 EP - 21 PB - Springer CY - Wien ER - TY - JOUR A1 - Kreskowski, Adrian A1 - Rendle, Gareth A1 - Fröhlich, Bernd T1 - Efficient Direct Isosurface Rasterization of Scalar Volumes JF - Computer Graphics Forum N2 - In this paper we propose a novel and efficient rasterization-based approach for direct rendering of isosurfaces. Our method exploits the capabilities of task and mesh shader pipelines to identify subvolumes containing potentially visible isosurface geometry, and to efficiently extract primitives which are consumed on the fly by the rasterizer. As a result, our approach requires little preprocessing and negligible additional memory. Direct isosurface rasterization is competitive in terms of rendering performance when compared with ray-marching-based approaches, and significantly outperforms them for increasing resolution in most situations. Since our approach is entirely rasterization based, it affords straightforward integration into existing rendering pipelines, while allowing the use of modern graphics hardware features, such as multi-view stereo for efficient rendering of stereoscopic image pairs for geometry-bound applications. Direct isosurface rasterization is suitable for applications where isosurface geometry is highly variable, such as interactive analysis scenarios for static and dynamic data sets that require frequent isovalue adjustment. KW - Rendering KW - Rastergrafik KW - Visualisierung KW - Maschinelles Sehen KW - isosurface KW - rendering KW - rasterization Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230525-63835 UR - https://onlinelibrary.wiley.com/doi/full/10.1111/cgf.14670 VL - 2022 IS - Volume 4, Issue 7 SP - 215 EP - 226 PB - Wiley Blackwell CY - Oxford ER - TY - GEN T1 - Bewertung der Sozialrendite von Can Batlló N2 - Die folgende Studie misst in wirtschaftlicher Hinsicht den sozialen Wert und die Sozialrendite, die auf einem Teil des Fabrikgeländes von Can Batlló von 2011 bis heute entstanden sind. Um die Beiträge der Nachbarschaftsgemeinschaft in wirtschaftlicher Hinsicht zu messen, wurde eine doppelte Schätzmethode angewandt. Zum einen wurden die Beiträge der ehrenamtlichen Personen von Can Batlló in den Bereichen Verwaltung und Unterhaltung, Reinigung, Bau und Durchführung von Aktivitäten quantifiziert und bewertet. Zum anderen wurde der Wert von Can Batlló berechnet, indem ein Vergleich mit den Kosten angestellt wurde, die entstanden wären, wenn der Bau von Räumen und die Erbringung von Dienstleistungen auf Basis der Referenzpreise der jeweiligen Dienstleistung durch die Stadt erfolgt wären. Diese wirtschaftliche Bewertung der Sozialrendite wird durch die Gemeinwohlbilanz ergänzt, die von der Organisation erstellt wird. T3 - KoopWohl - Working Paper - 9 KW - Gemeinwohl KW - Liegenschaft KW - Barcelona Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230523-63738 N1 - Übersetzung im Rahmen des BMBF-Projektes KoopWohl „Städtische Ko-Produktion von Teilhabe und Gemeinwohl. Aushandlungsprozesse zwischen zivilgesellschaftlichen Akteuren und städtischen Verwaltungen“ ER - TY - GEN T1 - Programm gemeinnützige Liegenschaften. Strategie zur Förderung der öffentlich-zivilgesellschaftlichen Zusammenarbeit N2 - Städten kam bei demokratischen Innovationsprozessen immer eine zentrale Rolle zu. Die öffentlichen Verwaltungen der großen Städte stellten Regeln für die Einführung und Ausweitung der bürgerschaftlichen Partizipation auf und reagierten damit auf Erfahrungen und Forderungen, die von der schöpferischen politischen Kraft der sozialen und urbanen Bewegungen getragen wurden. Die Geschichte Barcelonas ist dafür ein typisches Beispiel. Dank dieser sozialen Errungenschaften können wir von einer Reihe von Gütern und Dienstleistungen profitieren, die lokale Wohlfahrtssysteme ausmachen. Die Stadtverwal-tungen übernehmen die Aufgabe, Ressourcen und Dienstleistungen bereitzustellen, die nicht nur mit Wohlfahrt und Gesundheit in Verbindung stehen, sondern auch mit der Sorge um Umfeld und Umwelt, mit der Förderung von Maßnahmen in Bereichen wie Bildung, Kultur, Kunst oder Sport sowie mit der Dynamisierung von Wirtschaft und Gesellschaft. Ob zuständig oder nicht, die Kommunen müssen auf die Forderungen der Bürger*innen reagieren, sind sie doch die Verwaltungen, die den alltäglichen Problemen und Bedürfnissen am nächsten stehen. Daher liegt es weniger im Belieben der Stadtverwaltungen, ob sie notwendige Innova¬tionen anstoßen, sondern diese sind vielmehr Teil ihres Aufgabenbereichs. Um den Bedürfnissen der Bürger*innen seitens der öffentlichen Verwaltung gerecht zu werden, kam in den meisten Fällen eine von zwei Methoden zur Anwendung: die direkte Verwaltung durch die Behörden oder die indirekte Verwaltung mit dem privaten Sektor. Mit dem Anbruch einer neuen Zeit, in der alternative Methoden an Bedeutung gewonnen haben, wächst das Interesse an Modellen öffentlich-zivilgesellschaftlicher Zusammenarbeit. Hauptziel dieser Modelle ist es, Verwaltungen und Bürgerschaft eine Zusammenarbeit im gemeinsamen und allgemeinen Interesse zu ermöglichen, indem Projekte unterstützt werden, die Zugang, Nähe und Partizipation in sich vereinen. Vor diesem Hintergrund bietet die Verwaltung öffent¬licher Ressourcen Möglichkeiten zur Entwicklung neuer Formen kollektiver Intelligenz, mit ge¬meinsamer Verantwortung und Synergie zwischen Institution und Bürgerschaft, sodass die Städte zu wahrhaft kooperativen Plattformen für öffentliche Innovationen werden. T3 - KoopWohl - Working Paper - 7 KW - Gemeinwohl KW - Liegenschaft KW - öffentlich-zivilgesellschaftliche Partnerschaft Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230523-63724 N1 - Übersetzung im Rahmen des BMBF-Projektes KoopWohl „Städtische Ko-Produktion von Teilhabe und Gemeinwohl. Aushandlungsprozesse zwischen zivilgesellschaftlichen Akteuren und städtischen Verwaltungen“ ER - TY - GEN T1 - Gemeinwohlbilanz Fragenleitfaden. Kampagne 2019 N2 - In diesem Dokument gehen wir den gesamten Fragebogen für die vollständige Gemeinwohlbilanz (kurz GB, katalanisch Balanç Comunitari bzw. BC) Frage für Frage durch und erklären, was mit jeder einzelnen Frage gemeint ist und welche Informationen anzugeben sind. Es wird daher sehr empfohlen, vor dem Ausfüllen des Fragebogens in der App einen Blick auf den gesamten Fragenkatalog zu werfen, weil dies die Erhebung der Daten und die Verteilung der Aufgaben auf die verschiedenen mit der Erstellung der GB befassten Personen erleichtert. Die GB ist ein Selbstevaluierungstool, mit dem Organisationen ihre Tätigkeit unter Umwelt-, Sozial- und Governance-Aspekten bewerten können. T3 - KoopWohl - Working Paper - 8 KW - Gemeinwohl Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230523-63706 N1 - Übersetzung im Rahmen des BMBF-Projektes KoopWohl „Städtische Ko-Produktion von Teilhabe und Gemeinwohl. Aushandlungsprozesse zwischen zivilgesellschaftlichen Akteuren und städtischen Verwaltungen“ ER - TY - JOUR A1 - Sander, Hendrik A1 - Weißermel, Sören T1 - Urban Heat Transition in Berlin: Corporate Strategies, Political Conflicts, and Just Solutions JF - Urban Planning N2 - In the field of urban climate policy, heat production and demand are key sectors for achieving a sustainable city. Heat production has to shift from fossil to renewable energies, and the heat demand of most buildings has to be reduced significantly via building retrofits. However, analyses of heat transition still lack its contextualization within entangled urban politico-economic processes and materialities and require critical socio-theoretical examination. Asking about the embeddedness of heat transition within social relations and its implications for social justice issues, this article discusses the challenges and opportunities of heat transition, taking Berlin as an example. It uses an urban political ecology perspective to analyze the materialities of Berlin’s heating-housing nexus, its politico-economic context, implications for relations of inequality and power, and its contested strategies. The empirical analysis identifies major disputes about the future trajectory of heat production and about the distribution of retrofit costs. Using our conceptual approach, we discuss these empirical findings against the idea of a more just heat transition. For this purpose, we discuss three policy proposals regarding cost distribution, urban heat planning, and remunicipalization of heat utilities. We argue that this conceptual approach provides huge benefits for debates around heat transition and, more generally, energy justice and just transitions. KW - Berlin KW - Stadtplanung KW - Ökologie KW - energy justice KW - energy retrofitting KW - green gentrification KW - low-carbon policy KW - urban political ecology KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63845 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6178 VL - 2023 IS - Volume 8, No 1 SP - 361 EP - 371 PB - Cogitatio Press CY - Lissabon ER - TY - GEN A1 - Eckardt, Frank A1 - AlSadaty, Aliaa T1 - Urban Heritage in Transformation: Physical and Non-Physical Dimensions of Changing Contexts T2 - Urban Planning N2 - Urban heritage is at the core of the process of many changes observable in the cities today. The pace of urban change in heritage contexts, however, differs widely across the globe. In some areas, it goes slowly, in others it is astonishingly rapid. In some cases, change is coupled with risks of erosion of heritage and urban areas of value and in others change is synonymous with prosperity and positive impacts. Change in urban heritage areas is not only confined to the physical and tangible aspects, but needs to be regarded as mirroring changes related socio-political practices, economic implications, and cultural impacts. In this regard, the present thematic issue looks at various patterns of the interrelationship between heritage and urban change from both the physical and the non-physical perspectives. This editorial presents the topic of urban heritage and patterns of physical and non-physical transformation in urban heritage contexts and introduces the thematic issue “Urban Heritage and Patterns of Change: Spatial Practices of Physical and Non-Physical Transformation.” KW - Stadt KW - Kulturerbe KW - urban heritage KW - non-physical transformation KW - physical transformation KW - patterns of change KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63850 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6633 VL - 2023 IS - Volume 8, No. 1 PB - Cogitatio Press CY - Lissabon ER - TY - JOUR A1 - Bockelmann, Leo T1 - Impacts of Change: Analysing the Perception of Industrial Heritage in the Vogtland Region JF - Urban Planning N2 - Beyond metropolitan areas, many peripheral regions and their cities in Europe have, in manifold ways, been significantly shaped by industrialisation. In the context of the relocation of industrial production to other countries over the last decades, the question has been raised as to the role this heritage can play in futural regional development as well as the potential local identification with this history. Hence, this article seeks to analyse the perception of the industrial heritage in the Vogtland region, located alongside the border of three German federal states and the Czech Republic. It inquires as to the perception of the industrial heritage by the local population and related potential future narrations. Based on spontaneous and explorative interviews with local people as an empirical base, a discrepancy between the perception of the tangible and intangible dimensions of the industrial heritage can be observed. On the one hand, the tangible heritage like older factories and production complexes are seen as a functional legacy and an “eyesore” narrative is attributed to them. On the other hand, people often reference the personal and familial connection to the industry and highlight its importance for the historical development and the wealth of the region. But these positive associations are mainly limited to the intangible dimension and are disconnected from the material artefacts of industrial production. KW - Vogtland KW - Technisches Denkmal KW - Regionalentwicklung KW - industrial heritage KW - perception KW - regional development KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63814 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6025 VL - 2023 IS - Volume 8, No 1 SP - 30 EP - 38 PB - Cogitatio Press CY - Lissabon ER - TY - JOUR A1 - Damir, Mirhan A1 - Meyer, Martin A1 - Aziz, Hellen T1 - Patterns of Detachment: Spatial Transformations of the Phosphate Industry in el-Quseir, Egypt JF - Urban Planning N2 - The establishment of phosphate mines and processing plants by Italian entrepreneurs in el-Quseir in 1912 revitalized a town that had faced a steady decline after the opening of the Suez Canal and re-linked it to the world economy. To this day, the now defunct industrial site occupies a large section of physical el-Quseir and plays a key role in its identity. In this article, we explore the impact of the company’s successive industrialization and deindustrialization based on archival research, interviews, and mapping. By tracing physical changes on-site and in the city of el-Quseir from the founding of its phosphate industry until today, as well as the historical and current interactions of citizens with the industrial facilities, we hope to better understand the “cluster value” of the industrial plant in quotidian life and the effect of the vacuum left behind after the termination of production. As machinery and buildings are slowly eroding in the absence of expressed interest by the former Italian and current Egyptian owners, we aim to discuss the relationship between the citizens and their el-Quseir phosphate plant as a crucial element of its heritage value at the local level. KW - Ägypten KW - Industriekultur KW - Italien KW - Bergbau KW - Egypt KW - industrial heritage KW - Italy KW - mining KW - phosphate industry KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63805 UR - https://www.cogitatiopress.com/urbanplanning/article/view/6053 VL - 2023 IS - Volume 8, No 1 SP - 1 EP - 16 PB - Cogitatio Press CY - Lissabon ER - TY - JOUR A1 - Grimme, Sophie Alice A1 - Kollakidou, Avgi A1 - Sønderskov Zarp, Christian A1 - Hornecker, Eva A1 - Krüger, Norbert A1 - Graf, Phillip A1 - Marchetti, Emanuela T1 - Floor Cleaners as Helper Pets: Projecting Assistive Robots’ Agency on Zoomorphic Affordances JF - SN Computer Science N2 - Care of ageing adults has become a dominant field of application for assistive robot technologies, promising support for ageing adults residing in care homes and staff, in dealing with practical routine tasks and providing social and emotional relieve. A time consuming and human intensive necessity is the maintenance of high hygiene quality in care homes. Robotic vacuum cleaners have been proven effective for doing the job elsewhere, but—in the context of care homes—are counterproductive for residents’ well-being and do not get accepted. This is because people with dementia manifest their agency in more implicit and emotional ways, while making sense of the world around them. Starting from these premises, we explored how a zoomorphic designed vacuum cleaner could better accommodate the sensemaking of people with dementia. Our design reconceptualises robotic vacuum cleaners as a cat-like robot, referring to a playful behaviour and appearance to communicate a non-threatening and familiar role model. Data from an observational study shows that residents responded positively to our prototype, as most of them engaged playfully with it as if it was a pet or a cat-like toy, for example luring it with gestures. Some residents simply ignored the robot, indicating that it was not perceived as frightening or annoying. The level of activity influenced reactions; residents ignored our prototype if busy with other occupations, which proves that it did not cause significant disturbance. We further report results from focus group sessions with formal and informal caregivers who discussed a video prototype of our robot. Caregivers encouraged us to enhance the animal like characteristics (in behaviour and materiality) even further to result in richer interactions and provoke haptic pleasure but also pointed out that residents should not mistake the robot for a real cat. KW - Alter KW - Pflege KW - Serviceroboter KW - Mensch-Maschine-Kommunikation KW - Care home KW - Dementia KW - Assistive robot Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63796 UR - https://link.springer.com/article/10.1007/s42979-023-01769-2 VL - 2023 IS - volume 4, article 372 SP - 1 EP - 14 PB - Springer CY - Singapur ER - TY - BOOK ED - Brokow-Loga, Anton T1 - Corona und die Stadt. Kommunale Beteiligungskultur in der Krise? N2 - Die Corona-Krise stellt das städtische Zusammenleben auf eine harte Probe. Nicht nur sozialer Austausch, Kultur und Verkehr, sondern auch die kommunale Demokratie ist massiv beeinflusst. Wer kann in der Krise noch mitsprechen? Und wie verändert sie das Zusammenspiel von Verwaltung, Politik und Zivilgesellschaft? Die Beiträger*innen untersuchen anhand von Fallstudien die Auswirkungen der Krise auf die kommunale Beteiligungskultur. Sie fragen mit interdisziplinärem Blick nach der kommunalen Krisenbewältigung und erfolgreichen Governance-Strukturen im Kontext multipler Krisen. Ihr Ansatz der kritischen Urbanistik versteht sich dabei als Einladung zur Reflexion, Debatte und alternativen Praxis. KW - Stadt KW - Kommunalpolitik KW - Pandemie KW - Beteiligung KW - Urban Studies KW - Stadt KW - Corona KW - Teilhabe KW - Demokratie KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63785 UR - https://www.transcript-verlag.de/978-3-8376-6548-2/corona-und-die-stadt/ SN - 978-3-8394-6548-6 PB - transcript CY - Bielefeld ER - TY - JOUR A1 - Abrahamczyk, Lars A1 - Uzair, Aanis T1 - On the use of climate models for estimating the non-stationary characteristic values of climatic actions in civil engineering practice JF - Frontiers in Built Environment N2 - The characteristic values of climatic actions in current structural design codes are based on a specified probability of exceedance during the design working life of a structure. These values are traditionally determined from the past observation data under a stationary climate assumption. However, this assumption becomes invalid in the context of climate change, where the frequency and intensity of climatic extremes varies with respect to time. This paper presents a methodology to calculate the non-stationary characteristic values using state of the art climate model projections. The non-stationary characteristic values are calculated in compliance with the requirements of structural design codes by forming quasi-stationary windows of the entire bias-corrected climate model data. Three approaches for the calculation of non-stationary characteristic values considering the design working life of a structure are compared and their consequences on exceedance probability are discussed. KW - Klimaänderung KW - Bauwerk KW - climate change KW - climate models KW - extreme value analysis KW - characteristic value KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63751 UR - https://www.frontiersin.org/articles/10.3389/fbuil.2023.1108328/full VL - 2023 IS - volume 9, article 1108328 SP - 1 EP - 9 PB - Frontier Media CY - Lausanne ER - TY - JOUR A1 - Wiegand, Torben A1 - Osburg, Andrea T1 - Synthesis, Curing and Thermal Behavior of Amine Hardeners from Potentially Renewable Sources JF - Polymers N2 - Research into bio-based epoxy resins has intensified in recent decades. Here, it is of great importance to use raw materials whose use does not compete with food production. In addition, the performance of the newly developed materials should be comparable to that of conventional products. Possible starting materials are lignin degradation products, such as vanillin and syringaldehyde, for which new synthesis routes to the desired products must be found and their properties determined. In this article, the first synthesis of two amine hardeners, starting with vanillin and syringaldehyde, using the Smiles rearrangement reaction is reported. The amine hardeners were mixed with bisphenol A diglycidyl ether, and the curing was compared to isophorone diamine, 4-4′-diaminodiphenyl sulfone, and 4-Aminonbenzylamine by means of differential scanning calorimetry. It was found that the two amines prepared are cold-curing. As TG-MS studies showed, the thermal stability of at least one of the polymers prepared with the potentially bio-based amines is comparable to that of the polymer prepared with isophorone diamine, and similar degradation products are formed during pyrolysis. KW - Epoxide KW - Epoxidharz KW - Polymere KW - epoxy KW - amine hardener KW - curing agent KW - bio-based KW - vanillin KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230524-63745 UR - https://www.mdpi.com/2073-4360/15/4/990 VL - 2023 IS - volume 15, issue 4, article 990 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - JOUR A1 - Alemu, Yohannes L. A1 - Habte, Bedilu A1 - Lahmer, Tom A1 - Urgessa, Girum T1 - Topologically preoptimized ground structure (TPOGS) for the optimization of 3D RC buildings JF - Asian Journal of Civil Engineering N2 - As an optimization that starts from a randomly selected structure generally does not guarantee reasonable optimality, the use of a systemic approach, named the ground structure, is widely accepted in steel-made truss and frame structural design. However, in the case of reinforced concrete (RC) structural optimization, because of the orthogonal orientation of structural members, randomly chosen or architect-sketched framing is used. Such a one-time fixed layout trend, in addition to its lack of a systemic approach, does not necessarily guarantee optimality. In this study, an approach for generating a candidate ground structure to be used for cost or weight minimization of 3D RC building structures with included slabs is developed. A multiobjective function at the floor optimization stage and a single objective function at the frame optimization stage are considered. A particle swarm optimization (PSO) method is employed for selecting the optimal ground structure. This method enables generating a simple, yet potential, real-world representation of topologically preoptimized ground structure while both structural and main architectural requirements are considered. This is supported by a case study for different floor domain sizes. KW - Bodenmechanik KW - Strukturanalyse KW - Optimierung KW - Stahlbetonkonstruktion KW - Dreidimensionales Modell KW - ground structure KW - TPOGS KW - topology optimization KW - 3D reinforced concrete buildings Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63677 UR - https://link.springer.com/article/10.1007/s42107-023-00640-2 VL - 2023 SP - 1 EP - 11 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Guo, Hongwei A1 - Alajlan, Naif A1 - Zhuang, Xiaoying A1 - Rabczuk, Timon T1 - Physics-informed deep learning for three-dimensional transient heat transfer analysis of functionally graded materials JF - Computational Mechanics N2 - We present a physics-informed deep learning model for the transient heat transfer analysis of three-dimensional functionally graded materials (FGMs) employing a Runge–Kutta discrete time scheme. Firstly, the governing equation, associated boundary conditions and the initial condition for transient heat transfer analysis of FGMs with exponential material variations are presented. Then, the deep collocation method with the Runge–Kutta integration scheme for transient analysis is introduced. The prior physics that helps to generalize the physics-informed deep learning model is introduced by constraining the temperature variable with discrete time schemes and initial/boundary conditions. Further the fitted activation functions suitable for dynamic analysis are presented. Finally, we validate our approach through several numerical examples on FGMs with irregular shapes and a variety of boundary conditions. From numerical experiments, the predicted results with PIDL demonstrate well agreement with analytical solutions and other numerical methods in predicting of both temperature and flux distributions and can be adaptive to transient analysis of FGMs with different shapes, which can be the promising surrogate model in transient dynamic analysis. KW - Wärmeübergang KW - Deep Learning KW - Modellierung KW - physics-informed activation function KW - heat transfer KW - functionally graded materials Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63666 UR - https://link.springer.com/article/10.1007/s00466-023-02287-x VL - 2023 SP - 1 EP - 12 PB - Springer CY - Berlin ER - TY - JOUR A1 - Rabczuk, Timon A1 - Zhuang, Xiaoying A1 - Oterkus, Erkan T1 - Editorial: Computational modeling based on nonlocal theory JF - Engineering with Computers N2 - Nonlocal theories concern the interaction of objects, which are separated in space. Classical examples are Coulomb’s law or Newton’s law of universal gravitation. They had signficiant impact in physics and engineering. One classical application in mechanics is the failure of quasi-brittle materials. While local models lead to an ill-posed boundary value problem and associated mesh dependent results, nonlocal models guarantee the well-posedness and are furthermore relatively easy to implement into commercial computational software. KW - Computersimulation KW - Mathematische Modellierung KW - computational modeling KW - nonlocal theory Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63658 UR - https://link.springer.com/article/10.1007/s00366-022-01775-7 VL - 2023 IS - Volume 39, issue 3 PB - Springer CY - London ER - TY - CHAP A1 - Baron, Nicole A1 - Mandavere, Melody A1 - Cheruiyot, Roselyne T1 - SE/ NPO Ecosystems and urban Governance in Johannesburg T2 - ISTR, Fifteenth International Conference, Montreal, Canada N2 - This paper presents initial findings from the empirical analysis of community based social enterprise (SE) and non-profit organisation (NPO) ecosystems in Johannesburg. SEs and NPOs are widely recognised as contributors to the resilience of marginalised urban communities. However, the connection between these organisations , urban governance, and community resilience has not yet been sufficiently understood , particularly in African urban contexts. The 'Resilient Urban Communities' project focuses on Johannesburg as a case study to shed light on this under-researched topic. The key to exploring it is understanding SEs and NPOs as providers of public services, job creators, and promoters of good governance, all of which contribute to community resilience. Using this premise as a starting point, this paper investigates ecosystem conditions with a particular focus on state-civil society partnerships. Empirical data was generated through semi-struc-tured interviews and analysed with a grounded theory approach. Preliminary results of this ongoing research reveal that urban geography is a relevant ecosystem factor for SEs and NPOs from marginalised communities. We also suggest that co-production could be an opportunity for growth within the investigated state-civil society partnership. KW - Südafrika KW - Johannesburg KW - Nonprofit-Organisation KW - Regionalentwicklung KW - Governance KW - Unterstützungsökosystem KW - Sozialunternehmen Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230517-63643 ER - TY - JOUR A1 - Kraaz, Luise A1 - Koop, Maria A1 - Wunsch, Maximilian A1 - Plank-Wiedenbeck, Uwe T1 - The Scaling Potential of Experimental Knowledge in the Case of the Bauhaus.MobilityLab, Erfurt (Germany) JF - Urban Planning N2 - Real-world labs hold the potential to catalyse rapid urban transformations through real-world experimentation. Characterised by a rather radical, responsive, and location-specific nature, real-world labs face constraints in the scaling of experimental knowledge. To make a significant contribution to urban transformation, the produced knowledge must go beyond the level of a building, street, or small district where real-world experiments are conducted. Thus, a conflict arises between experimental boundaries and the stimulation of broader implications. The challenges of scaling experimental knowledge have been recognised as a problem, but remain largely unexplained. Based on this, the article will discuss the applicability of the “typology of amplification processes” by Lam et al. (2020) to explore and evaluate the potential of scaling experimental knowledge from real-world labs. The application of the typology is exemplified in the case of the Bauhaus.MobilityLab. The Bauhaus.MobilityLab takes a unique approach by testing and developing cross-sectoral mobility, energy, and logistics solutions with a distinct focus on scaling knowledge and innovation. For this case study, different qualitative research techniques are combined according to “within-method triangulation” and synthesised in a strengths, weaknesses, opportunities, and threats (SWOT) analysis. The analysis of the Bauhaus.MobilityLab proves that the “typology of amplification processes” is useful as a systematic approach to identifying and evaluating the potential of scaling experimental knowledge. KW - Stadtplanung KW - Infrastrukturplanung KW - Transformation KW - Reallabor KW - Amplifikationsprozesse KW - Bauhaus.MobilityLab KW - experimentelles Wissen KW - Realexperimente KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230509-63633 UR - https://www.cogitatiopress.com/urbanplanning/article/view/5329 VL - 2022 IS - Volume 7, Issue 3 SP - 274 EP - 284 ER - TY - CHAP A1 - Schwendner, Sascha A1 - Völlmecke, Lars A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - TESTING OF CONNECTIONS TAKEN FROM OLD NAILED ROOF TRUSSES N2 - Experimental testing of nailed connections taken from old roof trusses is presented in this paper. To enable the further use and preservation of nailed roof trusses, it is important to understand how the nail corrosion and aging processes of steel and wood affect the load-bearing capacity and deformation behaviour of such structures. The hypothesis was investigated whether corroded nails allow an increase in load-bearing capacity. Several old and new joints were tested in a first test series, and the results were very promising regarding the initial assumption. However, more tests must be carried out to verify the results. KW - Holzbau KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Withdreawal Y1 - 2023 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.6362 ER - TY - CHAP A1 - Völlmecke, Lars A1 - Schwendner, Sascha A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - Assessment of nailed connections in existing structures N2 - This paper presents the development of an assessment scheme for a visual qualitative evaluation of nailed connections in existing structures, such as board trusses. In terms of further use and preservation, a quick visual inspection will help to evaluate the quality of a structure regarding its load-bearing capacity and deformation behaviour. Tests of old and new nailed joints in combination with a rating scheme point out the correlation between the load-bearing capacity and condition of a joint. Old joints of comparatively good condition tend to exhibit better results than those of poor condition. Moreover, aged joints are generally more load-bearing than newly assembled ones. KW - Holzbau KW - Träger KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Re-use Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230609-63615 ER - TY - GEN A1 - Vollmer, Lisa A1 - Calbet i Elias, Laura A1 - Raab, Susanna A1 - Zanders, Theresa A1 - Kleine, Aya T1 - Ko-Produktion. Ein Handlungsleitfaden für die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und öffentlichen Verwaltungen N2 - Dieser Handlungsleitfaden möchte die Zusammenarbeit zwischen zivilgesellschaftlichen Akteuren und öffentlichen Verwaltungen erleichtern. Er enthält allerdings kein Patentrezept, mit dem eine solche Zusammenarbeit gebacken werden kann, sondern vor allem Anstöße, was es dabei alles zu bedenken gilt. Denn Ko-Produktionsprozesse, bei denen zivilgesellschaftliche Gruppen und Verwaltungen gemeinsam an der Umsetzung von Dienstleistungen und Infrastrukturen der Daseinsvorsorge arbeiten, sind komplexe und noch recht unerprobte Prozesse. T3 - KoopWohl - Working Paper - 6 KW - Koproduktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230413-49549 ET - Erste Auflage ER - TY - THES A1 - Cicek, Burhan A1 - Cancino, Pamela T1 - Küreken 2013. Entwerfen eines Dorfes aus Lehm N2 - Die Diskussionen in der Politik und in der Gesellschaft über Klimawandel, globale Erwärmung oder Nachhaltigkeit, die schon noch länger anhält, werden nie ein Ende finden, solange die Probleme, auf denen sie basiert, unlösbar bleiben. Vorgeschlagene Lösungen werden meist nicht richtig umgesetzt. Im Zusammenhang mit dieser Problematik steigt aber das Verantwortungsgefühl für bessere Zukunftsstrategien immer mehr. Die in den letzten Jahren vorgekommenen Umweltkatastrophen, wie im Golf von Mexiko (April 2010) oder im Fukushima (März 2011) die noch aktuell sind, zeigen, dass der Primärenergieeinsatz oder die Transportproblematik nicht mehr nur die Sorge der Entwicklungsländer, sondern auch der Industrieländer ist. Die Bauwelt mit ihrem erheblichen Energiebedarf spielt bei der Festlegung der Zukunftsstrategien eine große Rolle. Vor allem sind die Forschungen nach umweltfreundlichen Materialien, der Recyclebarkeit der eingesetzten Baumaterialien oder dem vernünftigen Nutzen der Naturressourcen die wichtigsten Schwerpunkte. In dieser Hinsicht bringt Lehm als Baumaterial viele Vorteile mit sich. Bei einem Artikel sagt der Lehmbauexperte Martin Rauch: “In heutiger Zeit und einem Kulturkreis, in dem Baugrund und Arbeitszeit unsere großen Kosten verursachen, findet der tradierte Lehmbau mit dem verbundenen großen Aufwand an menschlicher Arbeitszeit nur schwer seinen Platz. Über die Art der Bauweise wird auch die Entscheidung gefällt, wie und wo die Wertschöpfung erfolgt und ob der Einsatz des Budgets einen gesellschaftlichen Nutzen mit sich bringt. Im Vergleich zu einem Sichtbetonhaus können bei einem Stampflehmhaus 40% der Primärenergie ein gespart und dafür mehr lokale Arbeitsressourcen gebunden werden. Davon profitieren vor allem die lokalen Handwerker und mittelständischen Betriebe” Anatolien ist der Ort, wo man immer noch die tiefsten Wurzeln der Baukultur menschlicher Geschichte findet. Diese Baukultur, die in den vergangenen Jahrzehnten fast verlorengegangen ist, ist die Lehmbaukultur. In dieser Hinsicht beabsichtigt dieser Entwurf die Würde des Lehms in Anatolien wieder herzustellen und dadurch dessen Glaubwürdigkeit zurückzubringen. KW - Lehm KW - Lehmbau KW - stabilisierter Lehm KW - Stampflehm KW - Alker Y1 - 2011 U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.6356 ER - TY - THES A1 - Dokhanchi, Najmeh Sadat T1 - Measurement of the Indoor Air Temperature Distribution using Acoustic Travel-Time Tomography N2 - One of the main criteria determining the thermal comfort of occupants is the air temperature. To monitor this parameter, a thermostat is traditionally mounted in the indoor environment for instance in office rooms in the workplaces, or directly on the radiator or in another location in a room. One of the drawbacks of this conventional method is the measurement at a certain location instead of the temperature distribution in the entire room including the occupant zone. As a result, the climatic conditions measured at the thermostat point may differ from those at the user's location. This not only negatively impacts the thermal comfort assessment but also leads to a waste of energy due to unnecessary heating and cooling. Moreover, for measuring the distribution of the air temperature under laboratory conditions, multiple thermal sensors should be installed in the area under investigation. This requires high effort in both installation and expense. To overcome the shortcomings of traditional sensors, Acoustic travel-time TOMography (ATOM) offers an alternative based on measuring the transmission sound velocity signals. The basis of the ATOM technique is the first-order dependency of the sound velocity on the medium's temperature. The average sound velocity, along the propagation paths, can be determined by travel-times estimation of a defined acoustic signal between transducers. After the travel-times collection, the room is divided into several volumetric grid cells, i.e. voxels, whose sizes are defined depending on the dimension of the room and the number of sound paths. Accordingly, the spatial air temperature in each voxel can be determined using a suitable tomographic algorithm. Recent studies indicate that despite the great potential of this technique to detect room climate, few experiments have been conducted. This thesis aims to develop the ATOM technique for indoor climatic applications while coupling the analysis methods of tomography and room acoustics. The method developed in this thesis uses high-energy early reflections in addition to the direct paths between transducers for travel time estimation. In this way, reflections can provide multiple sound paths that allow the room coverage to be maintained even when a few or even only one transmitter and receiver are used. In the development of the ATOM measurement system, several approaches have been employed, including the development of numerical methods and simulations and conducting experimental measurements, each of which has contributed to the improvement of the system's accuracy. In order to effectively separate the early reflections and ensure adequate coverage of the room with sound paths, a numerical method was developed based on the optimization of the coordinates of the sound transducers in the test room. The validation of the optimal positioning method shows that the reconstructed temperatures were significantly improved by placing the transducers at the optimal coordinates derived from the developed numerical method. The other numerical method developed is related to the selection of the travel times of the early reflections. Accordingly, the detection of the travel times has been improved by adjusting the lengths of the multiple analysis time-windows according to the individual travel times in the reflectogram of the room impulse response. This can reduce the probability of trapping faulty travel times in the analysis time-windows. The simulation model used in this thesis is based on the image source model (ISM) method for simulating the theoretical travel times of early reflection sound paths. The simulation model was developed to simulate the theoretical travel times up to third-order reflections. The empirical measurements were carried out in the climate lab of the Chair of Building Physics under different boundary conditions, i.e., combinations of different room air temperatures under both steady-state and transient conditions, and different measurement setups. With the measurements under controllable conditions in the climate lab, the validity of the developed numerical methods was confirmed. In this thesis, the performance of the ATOM measurement system was evaluated using two measurement setups. The setup for the initial investigations consists of an omnidirectional receiver and a near omnidirectional sound source, keeping the number of transducers as few as possible. This has led to accurately identify the sources of error that could occur in each part of the measuring system. The second measurement setup consists of two directional sound sources and one omnidirectional receiver. This arrangement of transducers allowed a higher number of well-detected travel times for tomography reconstruction, a better travel time estimation due to the directivity of the sound source, and better space utilization. Furthermore, this new measurement setup was tested to determine an optimal selection of the excitation signal. The results showed that for the utilized setup, a linear chirp signal with a frequency range of 200 - 4000 Hz and a signal duration of t = 1 s represents an optimal selection with respect to the reliability of the measured travel times and higher signal-to-noise ratio (SNR). To evaluate the performance of the measuring setups, the ATOM temperatures were always compared with the temperatures of high-resolution NTC thermistors with an accuracy of ±0.2 K. The entire measurement program, including acoustic measurements, simulation, signal processing, and visualization of measurement results are performed in MATLAB software. In addition, to reduce the uncertainty of the positioning of the transducers, the acoustic centre of the loudspeaker was determined experimentally for three types of excitation signals, namely MLS (maximum length sequence) signals with different lengths and duration, linear and logarithmic chirp signals with different defined frequency ranges. For this purpose, the climate lab was converted into a fully anechoic chamber by attaching absorption panels to the entire surfaces of the room. The measurement results indicated that the measurement of the acoustic centre of the sound source significantly reduces the displacement error of the transducer position. Moreover, to measure the air temperature in an occupied room, an algorithm was developed that can convert distorted signals into pure reference signals using an adaptive filter. The measurement results confirm the validity of the approach for a temperature interval of 4 K inside the climate lab. Accordingly, the accuracy of the reconstructed temperatures indicated that ATOM is very suitable for measuring the air temperature distribution in rooms. T3 - Schriftenreihe der Professur Bauphysik - 8 KW - Bauphysik KW - Acoustic Travel-Time Tomography KW - Bauklimatik Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230414-49567 SN - 978-3-00-075344-2 (print) ER - TY - JOUR A1 - Simon-Ritz, Frank T1 - "Kultur ist Reichtum an Problemen": Wie sich der Kultur-Begriff der UNESCO an Egon Friedell annäherte JF - Palmbaum: Literarisches Journal aus Thüringen N2 - Der in H. 1/2023 erschienene Essay führt Gedanken einer in H. 1/2022 des "Palmbaum" erschienene Betrachtung (https://doi.org/10.25643/bauhaus-universitaet.4628) weiter. Im Zentrum stehen dabei die Bemühungen der UNESCO um das immaterielle Kulturerbe. KW - UNESCO KW - Kulturerbe Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230411-49524 VL - 2023 IS - Heft 1 PB - Quartus Verlag CY - Bucha bei Jena ER - TY - JOUR A1 - Londong, Jörg A1 - Barth, Marcus A1 - Söbke, Heinrich T1 - Reducing antimicrobial resistances by source separation of domestic wastewater JF - Frontiers in Environmental Health N2 - Antimicrobial resistances (AMR) are ranked among the top ten threats to public health and societal development worldwide. Toilet wastewater contained in domestic wastewater is a significant source of AMR entering the aquatic environment. The current commonly implemented combined sewer systems at times cause overflows during rain events, resulting in the discharge of untreated wastewater into the aquatic environment, thus promoting AMR. In this short research article, we describe an approach to transform combined sewer systems into source separation-modified combined sewer systems that separately treat toilet wastewater. We employ simulations for demonstrating that source separation-modified combined sewer systems reduce the emission of AMR- causing substances by up to 11.5 logarithm levels. Thus, source separation- modified combined sewer systems are amongst the most effective means of combating AMR. KEYWORDS KW - Allgemeinheit KW - Öffentlichkeit KW - Gesundheit KW - Kanal KW - Abwasser KW - Antibiotikum KW - Resistenz KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230403-49483 UR - https://www.frontiersin.org/articles/10.3389/fenvh.2023.1151898/full VL - 2023 IS - Volume 2, article 1151898 SP - 1 EP - 5 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Wellbrock, Christian-Mathias A1 - Lobigs, Frank A1 - Erbrich, Lukas A1 - Buschow, Christopher T1 - Coopetition is King. Ökonomische Potentiale und medienpolitische Implikationen kooperativer Journalismusplattformen N2 - Die vorliegende Studie geht der Fragestellung nach, wie sich eine anbieterübergreifende, abonnementbasierte Plattform für den digitalen Journalismus, also eine Art Spotify im Journalismus, auf die Umsätze der Anbieter journalistischer Inhalte und die Abonnements im Digitaljournalismus in Deutschland auswirken würde. Auf Basis drei sich ergänzender Schätzmethoden für Zahlungsbereitschaft, die in zwei Repräsentativbefragungen der deutschen Online-Bevölkerung mit insgesamt 8.000 Teilnehmenden angewandt wurden, gelangt das Whitepaper zu den folgenden Schlüsselbefunden. KW - Journalistik KW - Nachrichtensendung KW - Online-Medien KW - Geschäftsmodell KW - Journalismusplattform KW - Journalismusförderung KW - Digitaljournalismus KW - Abonnement KW - Studie Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230320-49473 VL - 2023 SP - 1 EP - 48 PB - Landesanstalt für Medien NRW CY - Düsseldorf ER - TY - JOUR A1 - Ansari, Meisam A1 - Zacharias, Christin A1 - Könke, Carsten T1 - Metaconcrete: An Experimental Study on the Impact of the Core-Coating Inclusions on Mechanical Vibration JF - materials N2 - Resonance vibration of structures is an unpleasant incident that can be conventionally avoided by using a Tuned Mass Damper (TMD). The scope of this paper contains the utilization of engineered inclusions in concrete as damping aggregates to suppress resonance vibration similar to a TMD. The inclusions are composed of a stainless-steel core with a spherical shape coated with silicone. This configuration has been the subject of several studies and it is best known as Metaconcrete. This paper presents the procedure of a free vibration test conducted with two small-scaled concrete beams. The beams exhibited a higher damping ratio after the core-coating element was secured to them. Subsequently, two meso-models of small-scaled beams were created: one representing conventional concrete and the other representing concrete with the core-coating inclusions. The frequency response curves of the models were obtained. The change in the response peak verified the ability of the inclusions to suppress the resonance vibration. This study concludes that the core-coating inclusions can be utilized in concrete as damping aggregates. KW - Beton KW - Schwingungsdämpfung KW - metaconcrete KW - damping aggregate KW - vibration absorber Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230315-49370 UR - https://www.mdpi.com/1996-1944/16/5/1836 VL - 2023 IS - Volume 16, Issue 5, article 1836 SP - 1 EP - 18 PB - MDPI CY - Basel ER - TY - THES A1 - Drescher, Marcel T1 - Open Innovation in KMU - Eine empirische Analyse der offenen Innovationsaktivitäten im Kontext der Entrepreneurial Orientation N2 - Open Innovation in kleinen und mittleren Unternehmen (KMU) hat sich stark ausdifferenziert. Dabei zeigt die Empirie, dass KMU unterschiedliche Wege in der offenen Entwicklung von Innovationen begehen. Um die bestehende Literatur zu erweitern, wurden mit dieser Dissertation die Ziele verfolgt 1) offene Innovationsaktivitäten in KMU aus einer Prozessperspektive aufzudecken und genau zu beschreiben und 2) zu erklären, warum sich die Öffnung von Innovationsprozessen in KMU unterscheidet. Dafür wurde auf eine multiple Fallstudienanalyse zurückgegriffen. Untersuchungsobjekte waren kleine etablierte High-Tech Unternehmen aus den neuen Bundesländern. Die Ergebnisse zeigen sechs Prozessmodelle der offenen Innovationsentwicklung, beschrieben als Open Innovation Muster. Deskriptionen dieser Muster unter Berücksichtigung von formenden Innovationsaktivitäten, ausgetauschtem Wissen, beteiligten externen Akteuren und Gründen für und gegen Open Innovation vermitteln ein über den bisherigen Forschungsstand hinausgehendes Verständnis von Open Innovation in KMU. Zudem zeigen die Ergebnisse, dass die Entrepreneurial Orientation erklärt, warum KMU bei der Ausgestaltung von offenen Innovationsprozessen unterschiedlich vorgehen. In der Dissertation wird detailliert dargelegt, welche Open Innovation Muster sich anhand der Entrepreneurial Orientation von KMU (nicht-entrepreneurial bis entrepreneurial) zeigen. Die Ergebnisse liefern sowohl wissenschaftliche Implikationen, als auch Handlungsempfehlungen für die Unternehmenspraxis. KW - Open Innovation KW - Innovationsmanagement KW - Entrepreneurship KW - Klein- und Mittelbetrieb KW - KMU KW - Entrepreneurial Orientation Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230314-49463 ER - TY - THES A1 - Gapševičius, Mindaugas T1 - Aesthetics of Maker Culture: the Active Role of the Audience N2 - In this work, practice-based research is conducted to rethink the understanding of aesthetics, especially in relation to current media art. Granted, we live in times when technologies merge with living organisms, but we also live in times that provide unlimited resources of knowledge and maker tools. I raise the question: In what way does the hybridization of living organisms and non-living technologies affect art audiences in the culture that may be defined as Maker culture? My hypothesis is that active participation of an audience in an artwork is inevitable for experiencing the artwork itself, while also suggesting that the impact of the umwelt changes the perception of an artwork. I emphasize artistic projects that unfold through mutual interaction among diverse peers, including humans, non-human organisms, and machines. In my thesis, I pursue collaborative scenarios that lead to the realization of artistic ideas: (1) the development of ideas by others influenced by me and (2) the materialization of my own ideas influenced by others. By developing the scenarios of collaborative work as an artistic experience, I conclude that the role of an artist in Maker culture is to mediate different types of knowledge and different positions, whereas the role of the audience is to actively engage in the artwork itself. At the same time, aesthetics as experience is triggered by the other, including living and non-living actors. It is intended that the developed methodologies could be further adapted in artistic practices, philosophy, anthropology, and environmental studies. KW - Medienkunst KW - BioArt KW - Media art KW - BioArt KW - Maker Culture Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230313-49396 ER - TY - THES A1 - Hunger, Francis T1 - Die Form der Datenbank N2 - Datenbanken sind heute die wichtigste Technik zur Organisation und Verarbeitung von Daten. Wie wurden sie zu einer der allgegenwärtigsten und gleichzeitig unsichtbarsten Praxis, die menschliche Zusammenarbeit ermöglicht? Diese Studie beginnt mit einer historiographischen Erkundung der zentralen medialen Konzepte von Datenbanken und mündet in das praxeologische Konzept der "Daten als Formation", kurz: In-Formation. Der erste Hauptteil befasst sich mit der Formatierung von Daten durch die Verarbeitung strukturierter Daten mittels relationaler Algebra. Es wird erarbeitet, auf welche Weise Struktur neues Wissen schafft. Im zweiten Teil wird erörtert, wie Datenbanken durch den diagrammatisch-epistemischen Raum der Tabelle operationalisiert werden. Drittens untersucht die Studie Transaktionen als Erklärungen dafür, wie Daten und reale Handlungen koordiniert und synchronisiert werden können. Im zweiten Hauptteil wird untersucht, wie relationale Datenbanken zunehmend zum Zentrum von Softwareanwendungen und Infrastrukturen wurden, wobei der Schwerpunkt auf wirtschaftlichen Praktiken liegt. In einem vergleichenden Ansatz wird anhand von Fallstudien in der DDR der 1970er bis 1990er Jahren die Frage gestellt, ob es eine „sozialistische“ Datenbankmanagement-Software gegeben hat. Dabei werden die „westlichen“ Produktionsdatenbanken BOMP, COPICS und MAPICS (IBM) sowie R2 (SAP) im Zusammenspiel mit den ostdeutschen Sachgebietsorientierten Programmiersystemen (SOPS) von Robotron diskutiert. Schließlich untersucht dieser Teil, wie die DDR ihr eigenes relationales Datenbankmanagementsystem, DABA 1600, entwickelte und dabei „westliche“ Technologie neu interpretierte. Das abschließende Kapitel fasst die Konzepte der relationalen Datenbanken als heute wichtigsten Datenorganisationstechnik zusammen. Es erörtert, inwiefern es möglich ist, die historiographische Erzählung über die Entstehung von Datenbankmanagementsystemen und ihre Folgen für die Geschichte der Informatik zu dezentrieren. Es schließt mit der Erkenntnis, dass östliche und westliche Medien der Kooperation sich in Form und Funktion erstaunlich ähnlich sind, beide wurzeln in den tiefen Genealogien von organisatorischen und wissensbildenden Datenpraktiken. Neben dieser medienwissenschaftlichen Arbeit besteht die Dissertation aus einem künstlerischen Teil, der dokumentiert wird: Anhand einer Reihe von Vlogs erkundet die fiktionale Figur „Data Proxy“ aktuelle Datenökologien. KW - Medientheorie KW - Datenbank KW - Medienkunst KW - Software KW - Datenbanken KW - Software-Studies KW - Geschichte des Computing KW - Medientheorie KW - Daten Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230306-49362 ER - TY - THES A1 - Jaouadi, Zouhour T1 - Pareto and Reliability-Oriented Aeroelastic Shape Optimization of Bridge Decks N2 - Due to the development of new technologies and materials, optimized bridge design has recently gained more attention. The aim is to reduce the bridge components materials and the CO2 emission from the cement manufacturing process. Thus, most long-span bridges are designed to be with high flexibility, low structural damping, and longer and slender spans. Such designs lead, however, to aeroelastic challenges. Moreover, the consideration of both the structural and aeroelastic behavior in bridges leads to contradictory solutions as the structural constraints lead to deck prototypes with high depth which provide high inertia to material volume ratios. On the other hand, considering solely the aerodynamic requirements, slender airfoil-shaped bridge box girders are recommended since they prevent vortex shedding and exhibit minimum drag. Within this framework comes this study which provides approaches to find optimal bridge deck cross-sections while considering the aerodynamic effects. Shape optimization of deck cross-section is usually formulated to minimize the amount of material by finding adequate parameters such as the depth, the height, and the thickness and while ensuring the overall stability of the structure by the application of some constraints. Codes and studies have been implemented to analyze the wind phenomena and the structural responses towards bridge deck cross-sections where simplifications have been adopted due to the complexity and the uniqueness of such components besides the difficulty of obtaining a final model of the aerodynamic behavior. In this thesis, two main perspectives have been studied; the first is fully deterministic and presents a novel framework on generating optimal aerodynamic shapes for streamlined and trapezoidal cross-sections based on the meta-modeling approach. Single and multi-objective optimizations were both carried out and a Pareto Front is generated. The performance of the optimal designs is checked afterwards. In the second part, a new strategy based on Reliability-Based Design Optimization (RBDO) to mitigate the vortex-induced vibration (VIV) on the Trans-Tokyo Bay bridge is proposed. Small changes in the leading and trailing edges are presented and uncertainties are considered in the structural system. Probabilistic constraints based on polynomial regression are evaluated and the problem is solved while applying the Reliability Index Approach (RIA) and the Performance Measure Approach (PMA). The results obtained in the first part showed that the aspect ratio has a significant effect on the aerodynamic behavior where deeper cross-sections have lower resistance against flutter and should be avoided. In the second part, the adopted RBDO approach succeeded to mitigate the VIV, and it is proven that designs with narrow or prolonged bottom-base length and featuring an abrupt surface change in the leading and trailing edges can lead to high vertical vibration amplitude. It is expected that this research will help engineers with the selections of the adequate deck cross-section layout, and encourage researchers to apply concepts of optimization regarding this field and develop the presented approaches for further studies. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2022,10 KW - Gestaltoptimierung KW - Vibration KW - Deck cross-sections KW - Reliability-based design optimization KW - Shape optimization KW - Pareto Front KW - Vortex-induced vibration Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230303-49352 ER - TY - THES A1 - Weise, Franziska T1 - Erfolgskritische Faktoren in exemplarischen Building Information Modeling Anwendungsfällen: Eine Analyse unter der Beachtung schleppender Digitalisierung und organisationaler Veränderungen N2 - Die fortschreitende Digitalisierung lässt innovative bauprojekt- und unternehmensinterne Workflows sowie Organisationssysteme entstehen. In diesem Zusammenhang ist die digitale Fortentwicklung durch Building Information Modeling [BIM] als Veränderungsprozess zu definieren, der Organisationsstrukturen nachhaltig umformen wird. BIM ist die führende digitale Arbeitsmethodik im Bauwesen, die entwurfs-, ausführungs- und bauprojektbezogenen Belangen gerecht werden kann. Die deutsche Bauwirtschaft ist im Vergleich zu anderen Branchen jedoch als digital rückständig zu betrachten. Sie ist durch einen Markt gekennzeichnet, an dem kleine und mittelständische Unternehmen [KMU] in hoher Zahl vertreten sind. Aufgrund von Anwendungsunkenntnis der kleinen und mittelständischen Unternehmen fehlt der flächendeckende und durchgängige BIM-Einsatz in Projekten. Mit dem Fokus auf dem Bauprojekt als temporärer Organisation adressiert der vorliegende Forschungsschwerpunkt die Schaffung eines realistischen Abbilds erprobter BIM-Anwendungsfälle in Modellprojekten. Herausgearbeitet werden derzeit bestehende BIM-Herausforderungen für Erstanwender, die die durchgängige BIM-Anwendung in Deutschland bisher hemmen. Die Forschungsarbeit fokussiert sich auf die Evaluation erfolgskritischer Faktoren [ekF] in BIM-Anwendungsfällen [AWF] im Rahmen einer qualitativen Inhaltsanalyse. Die digitale Transformation birgt strukturrelevante Veränderungsdeterminanten für Organisationen durch die BIM-Anwendung und außerdem Herausforderungen, die in der Anwendungsfallforschung betrachtet werden. Die Zielstellung ist dreiteilig. Ein entwickeltes BIM-Strukturmodell erfasst die aktuelle Richtlinienarbeit sowie Standardisierung und stellt dadurch den Rahmen notwendiger BIM-Strukturen im Bauprojekt auf. Aus dem Strukturmodell ist ein Modell zur Prüfung von Anwendungsfallrisiken abgeleitet worden. Dieses wird auf gezielt recherchierte BIM-Modellprojekte in Deutschland angewendet, um aus den erfolgskritischen Faktoren der darin praktizierten BIM-Anwendungsfälle eine ekF-Risikomatrix abzuleiten. Daraus geht ein unterstützendes BIM-Anwendungsinstrument in Form von BPMN-Abläufen für KMU hervor. Resultierend aus der Verbindung des BIM-Strukturmodels und der Anwendungsfallanalyse wird in den einzelnen Ablaufübersichten eine Risikoverortung je Anwendungsfall kenntlich gemacht. Unternehmen ohne BIM-Anwendungsexpertise in Bauprojektorganisationen erhalten auf diese Weise einen instrumentellen und niederschwelligen Zugang zu BIM, um die kollaborativen und wirtschaftlichen Vorteile der digitalen Arbeitsmethodik nutzen zu können. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 41 KW - Building Information Modeling KW - Gebäudedaten-Modellierung KW - digitale Organisation Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230302-49281 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - GEN A1 - Sidjimovska, Ivana T1 - Out of the Periphery. Museum of Solidarity N2 - The artistic research work is concerned with webs of transnational artistic solidarity, especially those ingrained in the Nonaligned Movement (NAM), which embraced differences and united them in a common anti-imperialist and anti-colonial fight. Taking the museum as an artefact of historically situated solidarity, the project examines the instruments of transnational art solidarity for conceiving, developing and implementing decolonial cultural practices today. The main research question regards thinking about whether and how the emancipatory potential of the transnational art solidarity can be extracted, recuperated and translated when dealing with present issues of cultural decolonisation. Three museums founded on the bases of international solidarity and donations of artworks form the case study. Consequently, the research findings are systematised in three discourses: The Autonomous Museum; The Decolonial Museum; and The Museum in Exile. N2 - Die künstlerische Forschungsarbeit befasst sich mit den Netzwerken der transnationalen künstlerischen Solidarität, insbesondere denen, die zwischen den Ländern des Globalen Südens zwischen den 1960er und den 1980er entstanden sind. Ausgehend von dem Museum als einem Artefakt historisch verankerter Solidarität untersucht das Projekt die Instrumente der transnationalen Kunstsolidarität für die Konzeption, Entwicklung und Umsetzung dekolonialer kultureller Praktiken heute. Die Hauptforschungsfrage besteht darin, ob und wie das emanzipatorische Potenzial der transnationalen Kunstsolidarität für die Auseinandersetzung mit aktuellen Fragen der kulturellen Dekolonisierung genutzt, zurückgewonnen und übersetzt werden kann. Drei Museen, die auf der Grundlage von Schenkungen von Kunstwerken gegründet wurden, bilden die Fallstudie. Folglich werden die Forschungsergebnisse in drei Diskursen systematisiert: Das autonome Museum, das dekoloniale Museum und das Museum im Exil. KW - Kunst KW - art solidarity KW - museum KW - decolonisation KW - Nonaligned Movement KW - Humboldt Forum KW - Museum KW - Entkolonialisierung KW - Bündnisfreiheit Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230228-49021 SP - 13 EP - 98 ER - TY - THES A1 - Dief, Shaima T1 - Ancient Egyptian Hybrid Deities in Visual Form as Mediator in Cultural Transmission N2 - The most fundamental understating of hybridization methodology takes the form of stable but dynamic notions, accumulated over time in the memory of individuals. Schematized and abstracted, the hybrids representation needs to be reproduced and reused in order to reconstruct and bring back other memories. Reinvented, or reused hybrids can support getting access to social, traditional, religious understanding of nations. In this manner, they take the form of the messenger / the mediator an innate, equivalent to the use of mental places in the art of memory. We remember mythology in order to remember other things. From individual memory perspective, or group collective memory, the act of recollection is assumed to be an individual act, biologically based in the brain, but by definition conditioned by social collectives. Following Halbwachs, this thesis does not recognize a dichotomy between individual and collective memory as two different types of remembering. Conversely, the collective is thought of as inherent to individual thought, questioning perspectives that regard individual recollection as isolated from social settings. The individual places himself in relation to the group and makes use of the collective frameworks of thought when he localizes and reconstructs the past, whether in private or in social settings. The frameworks of social relations, of time, and of space are constructs originating in social interaction and distributed in the memory of the group members. The individual has his own perspective on the collective frameworks of the group, and the group’s collective frameworks can be regarded as a common denominator of the individual outlooks on the framework. In acts of remembering, the individual may actualize the depicted symbols in memory, but he could also employ precepts from the environment. The latter have been referred to as material or external frameworks of memory, suggesting their similar role as catalysts for processes of remembrance such as that of the hybrids in my paintings. It is only with reference to the hybrids, who work as messengers / mediators with a dual nature, that communicate between the past and the present, the internal and external space, that individual memory and group memory is in focus. The exhibition at the Egyptian museum in Leipzig is my practical method to create a communicative memory, using hybrids as mediators in cultural transimission, as when the act refers to informal and everyday situations in which group members informally search for the past, it takes place in the communicative 162 memory. As explained in chapter one, the exhibition at the Egyptian museum in Leipzig is an act of remembering in search for the past with support of my paintings, which then can considered as part of the cultural memory. In addition to the theoretical framework summarized above, I have applied my hypothesis practically in the form of the public exhibition, and shared the methodology with public audience from Cairo / Egypt and Leipzig / German in the form of visual art workshops and open discussions. I have also suggested an analyzed description of the meaning of hybrids in my artwork as mediators and messengers for the purpose of cultural transmission, as well as in relation to other artists’ work and use of a similar concept. By using my hybrid creatures in my visual artwork, I am creating a bridge, mediators to represent both the past and the present, what we remember of the past, and how we understand the past. It is as explained in chapter two; that the hybridization methodology in terms of double membership represented in different cultures –Cairo / Egypt and Leipzig / Germany- can provide a framework which allows artistic discussions and could be individually interpreted, so individual cultures / individual memory can become transparent without losing their identities and turn into communicative memory. This transmission through the hybridization theoretical approech was explicitly clarified with the support of Krämer’s hypothesis. The practical attempt was examined by creating a relationship between the witness –me as an artist– and the audience –the exhibition visitors–, to cross space and time, not to bridge differences, rather to represent the contrasts transparently. The Kin-making proposition is adopted by many academics and scholars in modern society and theoretical research; the topic was represented in the roots of the ancient Egyptian mindset and supported theoretically by similar understandings such as Haraway’s definition of kin-making. The practical implementation of kin- making can be observed in many of my artwork and was analyzed visually and artistically in chapter three. My practical project outcome tested success by using hybrids in my paintings as mediators, it opened a communicative artistic discussion. This methodology gave a possible path of communication through paintings / visual analyses, and offered relativity through image self-interpretation. KW - Kollektives Gedächtnis KW - Kunst KW - Cultural memory KW - Communicative memory KW - Hybridization KW - Visual Art Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230220-49337 ER - TY - THES A1 - Wills, Nadine T1 - Modell bedarfsorientierter Leistungserbringung im FM auf Grundlage von Sensortechnologien und BIM N2 - Während der Digitalisierung im Bauwesen insbesondere im Bereich der Planungs- und Errichtungsphase von Bauwerken immer größere Aufmerksamkeit zuteilwird, ist das digitale Potenzial im Facility Management weit weniger ausgeschöpft, als dies möglich wäre. Vor dem Hintergrund, dass die Bewirtschaftung von Gebäuden jedoch einen wesentlichen Kostenanteil im Lebenszyklus darstellt, ist eine Fokussierung auf digitale Prozesse im Gebäudebetrieb erforderlich. Im Facility Management werden Dienstleistungen häufig verrichtungsorientiert, d. h. nach statischen Intervallen, oder bedarfsorientiert erbracht. Beide Arten der Leistungserbringung weisen Defizite auf, beispielweise weil Tätigkeiten auf Basis definierter Intervalle erbracht werden, ohne dass eine Notwendigkeit besteht oder weil bestehende Bedarfe mangels Möglichkeiten der Bedarfsermittlung nicht identifiziert werden. Speziell die Definition und Ermittlung eines Bedarfs zur Leistungserbringung ist häufig subjektiv geprägt. Auch sind Dienstleister oft nicht in frühen Phasen der Gebäudeplanung involviert und erhalten für ihre Dienstleistungen notwendige Daten und Informationen erst kurz vor Inbetriebnahme des zu betreibenden Gebäudes. Aktuelle Ansätze des Building Information Modeling (BIM) und die zunehmende Verfügbarkeit von Sensortechnologien in Gebäuden bieten Chancen, die o. g. Defizite zu beheben. In der vorliegenden Arbeit werden deshalb Datenmodelle und Methoden entwickelt, die mithilfe von BIM-basierten Datenbankstrukturen sowie Auswertungs- und Entscheidungsmethodiken Dienstleistungen der Gebäudebewirtschaftung objektiviert und automatisiert auslösen können. Der Fokus der Arbeit liegt dabei auf dem Facility Service der Reinigungs- und Pflegedienste des infrastrukturellen Facility Managements. Eine umfangreiche Recherche etablierter Normen und Standards sowie öffentlich zugänglicher Leistungsausschreibungen bilden die Grundlage der Definition erforderlicher Informationen zur Leistungserbringung. Die identifizierten statischen Gebäude- und Prozessinformationen werden in einem relationalen Datenbankmodell strukturiert, das nach einer Darstellung von Messgrößen und der Beschreibung des Vorgehens zur Auswahl geeigneter Sensoren für die Erfassung von Bedarfen, um Sensorinformationen erweitert wird. Um Messwerte verschiedener und bereits in Gebäuden existenten Sensoren für die Leistungsauslösung verwenden zu können, erfolgt die Implementierung einer Normierungsmethodik in das Datenbankmodell. Auf diese Weise kann der Bedarf zur Leistungserbringung ausgehend von Grenzwerten ermitteln werden. Auch sind Verknüpfungsmethoden zur Kombination verschiedener Anwendungen in dem Datenbankmodell integriert. Zusätzlich zur direkten Auslösung erforderlicher Aktivitäten ermöglicht das entwickelte Modell eine opportune Auslösung von Leistungen, d. h. eine Leistungserbringung vor dem eigentlich bestehenden Bedarf. Auf diese Weise können tätigkeitsähnliche oder räumlich nah beieinander liegende Tätigkeiten sinnvoll vorzeitig erbracht werden, um für den Dienstleister eine Wegstreckeneinsparung zu ermöglichen. Die Arbeit beschreibt zudem die für die Auswertung, Entscheidungsfindung und Auftragsüberwachung benötigen Algorithmen. Die Validierung des entwickelten Modells bedarfsorientierter Leistungserbringung erfolgt in einer relationalen Datenbank und zeigt simulativ für unterschiedliche Szenarien des Gebäudebetriebs, dass Bedarfsermittlungen auf Grundlage von Sensortechnologien erfolgen und Leistungen opportun ausgelöst, beauftragt und dokumentiert werden können. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 42 KW - Facility-Management KW - Building Information Modeling KW - Datenmodell KW - Sensor KW - Bedarfsermittlung KW - Sensortechnologien KW - Facility Management KW - FM-Leistungserbringung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230214-49248 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - THES A1 - Walther, Tino T1 - Ein Modell zur Optimierung der Bauleistungsfeststellung von Linienbaustellen N2 - Das Wissen um den realen Zustand eines Bauprojektes stellt eine entscheidende Kernkompetenz eines steuernden bauausführenden Unternehmens dar. Der bewusste Umgang mit Informationen und deren effiziente Nutzung sind entscheidende Erfolgsfaktoren für die zeit-, kosten- und qualitätsgerechte Realisierung von Bauprojekten. Obwohl die erforderlichen Erfolgsfaktoren bekannt sind, sind Kosten- und Terminüberschreitungen von Bauprojekten keine Seltenheit – eher das Gegenteil ist der Fall. Zukunftsweisende Digitalisierungsprojekte aber geben Anlass zu Hoffnung. Ein Beispiel ist der bereits im Dezember 2015 vom Bundesministerium für Verkehr und digitale Infrastruktur ins Leben gerufene Stufenplan Digitales Planen und Bauen. Dieser hat die Aufgabe flächendeckend die Methodik des Building Information Modeling (BIM) im Infrastrukturbereich einzuführen und somit die Digitalisierung in Deutschland zukunftsweisend voranzutreiben, indem erfolgreiche Bauprojekte mit durchgängigen Informationsflüssen arbeiten. Seither existiert eine Vielzahl an Digitalisierungsprojekten, alle mit gleichen Zielen. Nachweislich lassen sich hinsichtlich dessen allerdings auch vermehrt Defizite aufzeigen. So ist der Fortschritt sehr heterogen verteilt und lässt sich für die Branche nicht allgemeingültig festlegen. Mit einer internationalen Literaturrecherche sowie einer empirischen Studie als Untersuchungsmethode wurde in Form von Interviews mit Fachkundigen der tatsächliche Zustand der Digitalisierungs- und der BIM-Anwendungen im Straßenbau für den Controllingprozess der Bauleistungsfeststellung untersucht. Die erhobenen Daten wurden aufbereitet und anschließend softwaregestützt einer inhaltlichen Analyse unterzogen. In Kombination mit den Ergebnissen der Literaturrecherche wurden notwendige Anforderungen für den Controllingprozess der Bauleistungsfeststellung erhoben. Auf dieser Grundlage wurde ein Modell im Sinne der Systemtheorie zur Optimierung der Bauleistungsfeststellung entwickelt. Gegenstand der vorliegenden Arbeit ist die Integration der modellbasierten Arbeitsweise in die Prozesse der Bauleistungsfeststellung eines Bauunternehmens. Grundlage ist die objektive Auswertung des Fertigstellungsgrades (Baufortschrittes) mittels Luftbildaufnahmen. Deren Auswertung auf Basis eines Algorithmus und die systematische Identifikation des Baufortschrittes integriert in den Prozess der Bauleistungsfeststellung werden zu einem neu entwickelten Gesamtsystem mit dem Ergebnis eines optimierten Modells. Das entwickelte Modell wurde hinsichtlich Anwendbarkeit und praktischer Relevanz an ausgewählten Beispielszenarien untersucht und nachgewiesen. N2 - The knowledge of the real-time condition of a construction project represents a decisive core competence of a controlling construction company. The conscious handling and efficient use of information can contribute to and be decisive success factors for the timely, cost-efficient, and high-quality realization of construction projects. Despite the knowledge of the necessary success factors, cost and schedule overruns of construction projects are not uncommon, rather the opposite. Hope is shown by forward- looking digitalization projects. The implementation plan for digital planning and construction launched in December 2015 by the Federal Ministry of Transport and Digital Infrastructure. Its task is to introduce the Building Information Modelling (BIM) methodology across the board and to drive forward digitization in the entire construction industry and generate successful construction projects with a continuous flow of information. Since then, there have been numerous digitization projects, all with the same goal. However, it has been proven that there are also increasing deficits. For example, progress is very heterogeneously distributed, and it is not possible to make a general statement for the industry. Based on an international literature investigation and an empirical study as the underlying research method, the actual state of digitalization and BIM applications in road construction for the controlling process of construction performance assessment was examined in the form of qualitative interviews with professionals. The collected data was processed and then subjected to a software-based content analysis. Furthermore, a model was developed in the sense of the system theory for optimizing the construction performance assessment based on the previous research. The integration of the model-based determination of the construction performance of a construction company is the subject of this dissertation. The basis is the objective evaluation of the degree of completion (construction progress) by means of aerial photographs. The model- and algorithm-based evaluation of the construction progress combined with the systematic integration in the process of the construction performance assessment becomes a newly developed overall system with the result of an optimized model. The developed model was examined and proven regarding applicability and practical relevance in selected example scenarios. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 43 KW - Building Information Modeling KW - Building Information Modeling KW - Bauleistungsfeststellung KW - Leistungsmeldung KW - Controlling KW - Baubetrieb Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230210-49115 PB - Eigenverlag der Professur Baubetrieb und Bauverfahren CY - Weimar ER - TY - JOUR A1 - Alsaad, Hayder A1 - Schälte, Gereon A1 - Schneeweiß, Mario A1 - Becher, Lia A1 - Pollack, Moritz A1 - Gena, Amayu Wakoya A1 - Schweiker, Marcel A1 - Hartmann, Maria A1 - Voelker, Conrad A1 - Rossaint, Rolf A1 - Irrgang, Matthias T1 - The Spread of Exhaled Air and Aerosols during Physical Exercise JF - Journal of Clinical Medicine N2 - Physical exercise demonstrates a special case of aerosol emission due to its associated elevated breathing rate. This can lead to a faster spread of airborne viruses and respiratory diseases. Therefore, this study investigates cross-infection risk during training. Twelve human subjects exercised on a cycle ergometer under three mask scenarios: no mask, surgical mask, and FFP2 mask. The emitted aerosols were measured in a grey room with a measurement setup equipped with an optical particle sensor. The spread of expired air was qualitatively and quantitatively assessed using schlieren imaging. Moreover, user satisfaction surveys were conducted to evaluate the comfort of wearing face masks during training. The results indicated that both surgical and FFP2 masks significantly reduced particles emission with a reduction efficiency of 87.1% and 91.3% of all particle sizes, respectively. However, compared to surgical masks, FFP2 masks provided a nearly tenfold greater reduction of the particle size range with long residence time in the air (0.3–0.5 μm). Furthermore, the investigated masks reduced exhalation spreading distances to less than 0.15 m and 0.1 m in the case of the surgical mask and FFP2 mask, respectively. User satisfaction solely differed with respect to perceived dyspnea between no mask and FFP2 mask conditions. KW - Sport KW - Training KW - Fahrradergometer KW - sport KW - training KW - cycle ergometer KW - schlieren imaging KW - particles concentration KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230208-49262 UR - https://www.mdpi.com/2077-0383/12/4/1300 VL - 2023 IS - Volume 12, issue 4, article 1300 PB - Basel CY - MDPI ER - TY - JOUR A1 - Bapir, Baban A1 - Abrahamczyk, Lars A1 - Wichtmann, Torsten A1 - Prada-Sarmiento, Luis Felipe ED - Ozturk, Baki T1 - Soil-structure interaction: A state-of-the-art review of modeling techniques and studies on seismic response of building structures JF - Frontiers in Built Environment N2 - The present article aims to provide an overview of the consequences of dynamic soil-structure interaction (SSI) on building structures and the available modelling techniques to resolve SSI problems. The role of SSI has been traditionally considered beneficial to the response of structures. However, contemporary studies and evidence from past earthquakes showed detrimental effects of SSI in certain conditions. An overview of the related investigations and findings is presented and discussed in this article. Additionally, the main approaches to evaluate seismic soil-structure interaction problems with the commonly used modelling techniques and computational methods are highlighted. The strength, limitations, and application cases of each model are also discussed and compared. Moreover, the role of SSI in various design codes and global guidelines is summarized. Finally, the advancements and recent findings on the SSI effects on the seismic response of buildings with different structural systems and foundation types are presented. In addition, with the aim of helping new researchers to improve previous findings, the research gaps and future research tendencies in the SSI field are pointed out. KW - Boden-Bauwerk-Wechselwirkung KW - Bautechnik KW - Erdbeben KW - Grundlage KW - soil-structure interaction KW - structural engineering KW - earthquake engineering KW - foundations KW - OA-Publikationsfonds2023 Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230206-49190 UR - https://www.frontiersin.org/articles/10.3389/fbuil.2023.1120351/full VL - 2023 IS - Volume 9 SP - 1 EP - 17 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Aicher, Andreas A1 - Börmel, Melanie A1 - Londong, Jörg A1 - Beier, Silvio T1 - Vertical green system for gray water treatment: Analysis of the VertiKKA-module in a field test JF - Frontiers in Environmental Science N2 - This work presents a modular Vertical Green System (VGS) for gray water treatment, developed at the Bauhaus-Universität Weimar. The concept was transformed into a field study with four modules built and tested with synthetic gray water. Each module set contains a small and larger module with the same treatment substrate and was fed hourly. A combination of lightweight structural material and biochar of agricultural residues and wood chips was used as the treatment substrate. In this article, we present the first 18 weeks of operation. Regarding the treatment efficiency, the parameters chemical oxygen demand (COD), total phosphorous (TP), ortho-phosphate (ortho-P), total bound nitrogen (TNb), ammonium nitrogen (NH4-N), and nitrate nitrogen (NO3-N) were analyzed and are presented in this work. The results of the modules with agricultural residues are promising. Up to 92% COD reduction is stated in the data. The phosphate and nitrogen fractions are reduced significantly in these modules. By contrast, the modules with wood chips reduce only 67% of the incoming COD and respectively less regarding phosphates and the nitrogen fraction. KW - Grauwasser KW - Abwassertechnologie KW - vertical green system KW - grey water treatment KW - urban heat island effect KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48840 UR - https://www.frontiersin.org/articles/10.3389/fenvs.2022.976005/full VL - 2022 IS - Volume 10 (2022), article 976005 SP - 1 EP - 7 PB - Frontiers Media CY - Lausanne ER - TY - JOUR A1 - Coenen, Ekkehard T1 - Communicative Action, Objectifications, and the Triad of Violence JF - Human Studies N2 - This article aims to develop a social theory of violence that emphasizes the role of the third party as well as the communication between the involved subjects. For this Teresa Koloma Beck’s essay ‘The Eye of the Beholder: Violence as a Social Process’ is taken as a starting point, which adopts a social-constructivist perspective. On the one hand, the basic concepts and the benefits of this approach are presented. On the other hand, social-theoretical problems of this approach are revealed. These deficits are counteracted by expanding Koloma Beck’s approach with a communicative-constructivist framework. Thus, the role of communicative action and the ‘objectification of violence’ is emphasized. These aspects impact the perception, judgement and (de-)legitimation of violence phenomena and the emergence of a ‘knowledge of violence’. Communicative actions and objectifications form a key to understanding violent interactions and the link between the micro and macro levels. Finally, the methodological consequences for the research of violence and Communicative Constructivism are discussed. Furthermore, possible research fields are outlined, which open up by looking at communicative action and the objectifications within the ‘triads of violence’. KW - Gewalt KW - Soziologie KW - violence KW - social theory KW - communicative action KW - triad of violence Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48828 UR - https://link.springer.com/article/10.1007/s10746-022-09639-1 VL - 2022 IS - 45 (2022) SP - 447 EP - 468 PB - Springer Science + Business Media B.V CY - Dordrecht ER - TY - JOUR A1 - Stadler, Max T1 - Gründerzeit. Hightech und Alternativen der Wissenschaft in West-Berlin JF - NTM Zeitschrift für Geschichte der Wissenschaften, Technik und Medizin N2 - Zu den diversen Unternehmungen sozialbewegter „Gegenwissenschaft“, die um 1980 auf der Bildfläche der BRD erschienen, zählte der 1982 gegründete Berliner Wissenschaftsladen e. V., kurz WILAB – eine Art „alternatives“ Spin-off der Technischen Universität Berlin. Der vorliegende Beitrag situiert die Ausgründung des „Ladens“ im Kontext zeitgenössischer Fortschritte der (regionalen) Forschungs- und Technologiepolitik. Gezeigt wird, wie der deindustrialisierenden Inselstadt, qua „innovationspolitischer“ Gegensteuerung, dabei sogar eine gewisse Vorreiterrolle zukam: über die Stadtgrenzen hinaus sichtbare Neuerungen wie die Gründermesse BIG TECH oder das 1983 eröffnete Berliner Innovations- und Gründerzentrum (BIG), der erste „Incubator“ [sic] der BRD, etwa gingen auf das Konto der 1977/78 lancierten Technologie-Transferstelle der TU Berlin, TU-transfer. Anders gesagt: tendenziell bekam man es hier nun mit Verhältnissen zu tun, die immer weniger mit den Träumen einer „kritischen“, nicht-fremdbestimmten (Gegen‑)Wissenschaft kompatibel waren. Latent konträr zur historiographischen Prominenz des wissenschaftskritischen Zeitgeists fristeten „alternativen“ Zielsetzungen verpflichtete Unternehmungen wie „WILAB“ ein relativ marginalisiertes Nischendasein. Dennoch wirft das am WILAB verfolgte, so gesehen wenig aussichtsreiche Anliegen, eine andere, nämlich „humanere“ Informationstechnologie in die Wege zu leiten, ein instruktives Licht auf die Aufbrüche „unternehmerischer“ Wissenschaft in der BRD um 1980. KW - Berlin KW - Wissenschaftspolitik KW - Gegenwissenschaft KW - Gegenwissen KW - Informatik KW - Strukturkrise Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48800 UR - https://link.springer.com/article/10.1007/s00048-022-00352-9 VL - 2022 IS - 30 (2022) SP - 599 EP - 632 PB - Basel CY - Birkhäuser ER - TY - JOUR A1 - Hahlbrock, David A1 - Braun, Michael A1 - Heidel, Robin A1 - Lemmen, Patrik A1 - Boumann, Roland A1 - Bruckmann, Tobias A1 - Schramm, Dieter A1 - Helm, Volker A1 - Willmann, Jan T1 - Cable Robotic 3D-printing: additive manufacturing on the construction site JF - Construction Robotics N2 - This paper outlines an important step in characterizing a novel field of robotic construction research where a cable-driven parallel robot is used to extrude cementitious material in three-dimensional space, and thus offering a comprehensive new approach to computational design and construction, and to robotic fabrication at larger scales. Developed by the Faculty of Art and Design at Bauhaus-University Weimar (Germany), the faculty of Architecture at the University of Applied Sciences Dortmund (Germany) and the Chair of Mechatronics at the University of Duisburg-Essen (Germany), this approach offers unique advantages over existing additive manufacturing methods: the system is easily transportable and scalable, it does not require additional formwork or scaffolding, and it offers digital integration and informational oversight across the entire design and building process. This paper considers 1) key research components of cable robotic 3D-printing (such as computational design, material exploration, and robotic control), and 2) the integration of these parameters into a unified design and building process. The demonstration of the approach at full-scale is of particular concern. KW - Robotik KW - Automation KW - 3D-Printing KW - Cable-driven parallel robots Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48791 UR - https://link.springer.com/article/10.1007/s41693-022-00082-3 VL - 2022 SP - 1 EP - 14 PB - Springer International Publishing CY - Cham ER - TY - JOUR A1 - Moscoso, Caridad A1 - Kraus, Matthias T1 - On the Verification of Beams Subjected to Lateral Torsional Buckling by Simplified Plastic Structural Analysis JF - ce/papers N2 - Plastic structural analysis may be applied without any difficulty and with little effort for structural member verifications with regard to lateral torsional buckling of doubly symmetric rolled I sections. Suchlike analyses can be performed based on the plastic zone theory, specifically using finite beam elements with seven degrees of freedom and 2nd order theory considering material nonlinearity. The existing Eurocode enables these approaches and the coming-up generation will provide corresponding regulations in EN 1993-1-14. The investigations allow the determination of computationally accurate limit loads, which are determined in the present paper for selected structural systems with different sets of parameters, such as length, steel grade and cross section types. The results are compared to approximations gained by more sophisticated FEM analyses (commercial software Ansys Workbench applying solid elements) for reasons of verification/validation. In this course, differences in the results of the numerical models are addressed and discussed. In addition, results are compared to resistances obtained by common design regulations based on reduction factors χlt including regulations of EN 1993-1-1 (including German National Annex) as well as prEN 1993-1-1: 2020-08 (proposed new Eurocode generation). Concluding, correlations of results and their advantages as well as disadvantages are discussed. KW - Stahl KW - Träger KW - Robustheit KW - steel KW - stability KW - flexural-torsional-buckling Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48782 UR - https://onlinelibrary.wiley.com/doi/full/10.1002/cepa.1835 VL - 2022 IS - Volume 5, Issue 4 SP - 914 EP - 923 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Morawski, Tommaso T1 - La tavola e la mappa. Paradigmi per una metaforologia mediale dell’immaginazione cartografica in Kant JF - Philosophy Kitchen N2 - Immanuel Kant’s thought is a central historical and theoretical reference in Hans Blumenberg’s metaphorological project. This is demonstrated by the fact that in the Paradigms the author outlines the concept of absolute metaphor by explicitly referring to §59 of the Critique of the Power of Judgment and recognizing in the Kantian symbol a model for his own metaphorics. However, Kant’s name also appears in the chapter on the metaphor of the “terra incognita” that not only did he theorize the presence of symbolic hypotyposis in our language [...] but also made extensive use of metaphors linked to “determinate historical experiences”. In particular: geographical metaphors. In my essay, I would like to start from the analysis of Kant’s geographical metaphors in order to try to rethink Blumenberg’s archaeological method as an archaeology of media that grounds the study of metaphors in the materiality of communication and the combination of tools, agents and media. KW - Kant, Immanuel KW - Blumenberg, Hans KW - Metapher KW - Medienwissenschaft KW - Metaphorik KW - geografische Metapher KW - Medienarchäologie Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48766 UR - https://www.ojs.unito.it/index.php/philosophykitchen/article/view/7191 VL - 2022 IS - 17, II/2022 SP - 137 EP - 152 PB - Università degli Studi di Torino CY - Turino ER - TY - JOUR A1 - Buschow, Christopher A1 - Wellbrock, Christian-Mathias T1 - “Spotify for News”? User Perception of Subscription-Based Content Platforms for News Media JF - Journalism and Media N2 - Subscription-based news platforms (such as “Apple News+” or “Readly”) that bundle content from different publishers into one comprehensive package and offer it to media users at a fixed monthly rate are a new way of accessing and consuming digital journalism. These services have received little attention in journalism studies, although they differ greatly from traditional media products and distribution channels. This article empirically investigates the perception of journalism platforms based on eight qualitative focus group discussions with 55 German news consumers. Results show that the central characteristics these platforms should fulfill in order to attract users are strikingly similar to the characteristics of media platforms from the music and video industries, in particular regarding price points, contract features, and modes of usage. Against this background, the potential and perspectives of a subscription-based news platform for journalism’s societal role are discussed. KW - Journalistik KW - Journalismus KW - Nachrichtensendung KW - Online-Medien KW - audience studies KW - journalism products KW - content platforms Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230124-48740 UR - https://www.mdpi.com/2673-5172/4/1/1 VL - 2022 IS - 2023, 4 SP - 1 EP - 15 PB - MDPI CY - Basel ER - TY - THES A1 - Neupert, Max T1 - Audiovisuelles Cut-Up N2 - This research identifies and examines the aesthetic phenomenon of extremely fast cut audiovisual media works. The term 'audiovisual cut-up' is proposed. The literary form of cut-up is described and compared to the characteristics of the reviewed phenomenon. A wide range of audiovisual works across different contexts is analyzed; all of which are sharing the same formal criteria of extremely short edits, including the authors contributions to the field. The technological tools facilitating the novel aesthetic are often crafted by the artists themselves because ready made solutions did not preexist. Audiovisual cut-ups are classified according to their contexts and mediums. Some observations are made regarding how audio and video essentially differ in their character, what the smallest perceivable unit is, and which role latencies and anticipation play in the perception of audiovisual media. Three main theses are made: 1. Audiovisual cut-up has the power to amplify small, previously hidden details and may be used to distort and deride the source material. 2. Technological advances have led to the development of audiovisual cut-up. 3. The aesthetic possibilities of cut-ups have become an integral part in the spectrum of possible audio-visual techniques. N2 - Diese Forschungsarbeit bezeichnet und analysiert ein ästhetisches Phänomen audiovisueller Arbeiten mit sehr schnellen Schnitten. Der Begriff „Audiovisuelles Cut-Up“ wird vorgeschlagen um dieses Phänomen zu bezeichnen. Verschiedenste audiovisuelle Arbeiten aus unterschiedlichen Kontexten werden analysiert, welche das formale Kriterium von extrem kurzen Einstellungen erfüllen – einschließlich der eigenen Forschungsbeiträge des Autors. Die Werkzeuge und Technologien, welche die neuartige Ästhetik ermöglichten werden vorgestellt. Oftmals wurden diese von den Künstlern selbst geschaffen, da fertige Lösungen nicht verfügbar waren. Audiovisuelle Cut-Ups werden nach Kontext und Medium systematisiert und verortet. Es schließen sich Beobachtungen an, in wie fern Audio und Video sich in ihrem Charakter unterscheiden, was die kleinste wahrnehmbare Einheit ist und welche Rolle Latenzen und Antizipation bei der Wahrnehmung von audiovisuellen Medien spielen. Drei Hauptthesen werden Aufgestellt: 1. Audiovisuelles Cut-Up hat die Kraft winzige, vormals überdeckte Details deutlich zu machen. Damit kann es das Quellmaterial verdichten aber auch den Inhalt manipulieren. 2. Technische Entwicklungen haben das audiovisuelle Cut-Up hervorgerufen. 3. Heute ist die Ästhetik als ein Stilmittel im Werkzeugkasten audiovisueller Gestaltung etabliert. KW - Medienkunst KW - Video KW - Experimentalfilm KW - Musikvideo KW - Werbung Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230123-48968 ER - TY - THES A1 - Remus, Ricardo T1 - Ultraschallgestützte Betonherstellung. Konzept für eine ressourcenschonende Betonproduktion N2 - Aktuell findet aufgrund gesellschaftspolitischer Forderungen in vielen Industriezweigen ein Umdenken in Richtung Effizienz und Ökologie aber auch Digitalisierung und Industrie 4.0 statt. In dieser Hinsicht steht die Bauindustrie, im Vergleich zu Industrien wie IT, Automobil- oder Maschinenbau, noch am Anfang. Dabei sind die Potentiale zur Einsparung und Optimierung gerade in der Bauindustrie aufgrund der großen Mengen an zu verarbeiteten Materialien besonders hoch. Die internationale Ressourcen- und Klimadebatte führt verstärkt dazu, dass auch in der Zement- und Betonherstellung neue Konzepte erstellt und geprüft werden. Einerseits erfolgt intensive Forschung und Entwicklung im Bereich alternativer, klimafreundlicher Zemente. Andererseits werden auch auf Seiten der Betonherstellung innovative materialsparende Konzepte geprüft, wie die aktuelle Entwicklung von 3D-Druck mit Beton zeigt. Aufgrund der hohen Anforderungen an Konstruktion, Qualität und Langlebigkeit von Bauwerken, besitzen Betonfertigteile oftmals Vorteile gegenüber Ortbeton. Die hohe Oberflächenqualität und Dauerhaftigkeit aber auch die Gleichmäßigkeit und witterungsunabhängige Herstellung sind Merkmale, die im Zusammenhang mit Betonfertigteilen immer wieder erwähnt werden. Dabei ist es essenziell, dass auch der Betonherstellungsprozess im Fertigteilwerk kritisch hinterfragt wird, damit eine effizientere und nachhaltigere Produktion von Betonfertigteilen möglich wird. Bei der Herstellung von Betonteilen im Fertigteilwerk liegt ein besonderer Fokus auf der Optimierung der Frühfestigkeitsentwicklung. Hohe Frühfestigkeiten sind Voraussetzung für einen hochfrequenten Schalungszyklus, was Arbeiten im 2- bzw. 3-Schichtbetrieb ermöglicht. Oft werden zur Sicherstellung hoher Frühfestigkeiten hochreaktive Zemente in Kombination mit hohen Zementgehalten im Beton und/oder einer Wärmebehandlung eingesetzt. Unter dieser Prämisse ist eine ökologisch nachhaltige Betonproduktion mit verminderter CO2 Bilanz nicht möglich. In der vorliegenden Arbeit wird ein neues Verfahren zur Beschleunigung von Beton eingeführt. Hierbei werden die Bestandteile Zement und Wasser (Zementsuspension) mit Ultraschall vorbehandelt. Ausgangspunkt der Arbeit sind vorangegangene Untersuchungen zum Einfluss von Ultraschall auf die Hydration von Zement bzw. dessen Hauptbestandteil Tricalciumsilikat (C3S), die im Rahmen dieser Arbeit weiter vertieft werden. Darüber hinaus wird die Produktion von Beton mit Ultraschall im Technikumsmaßstab betrachtet. Die so erlangten Erfahrungen dienten dazu, das Ultraschall-Betonmischsystem weiterzuentwickeln und erstmalig zur industriellen Betonproduktion zu nutzen. In der vorliegenden Arbeit werden die Auswirkungen von Ultraschall auf die Hydratation von C3S zunächst weitergehend und grundlegend untersucht. Dies erfolgte mittels Messung der elektrischen Leitfähigkeit, Analyse der Ionenkonzentration (ICP-OES), Thermoanalyse, Messung der BET-Oberfläche sowie einer optischen Auswertung mittels Rasterelektronenmikroskopie (REM). Der Fokus liegt auf den ersten Stunden der Hydratation, also der Zeit, die durch die Ultraschallbehandlung am stärksten beeinflusst wird. In den Untersuchungen zeigt sich, dass die Beschleunigungswirkung von Ultraschall in verdünnten C3S Suspensionen (w/f-Wert = 50) stark von der Portlanditkonzentration der Lösung abhängt. Je niedriger die Portlanditkonzentration, desto größer ist die Beschleunigung. Ergänzende Untersuchungen der Ionenkonzentration der Lösung sowie Untersuchungen am hydratisierten C3S zeigen, dass unmittelbar nach der Beschallung (nach ca. 15 Minuten Hydratation) erste Hydratphasen vorliegen. Die durch Ultraschall initiiere Beschleunigung ist in den ersten 24 Stunden am stärksten und klingt dann sukzessive ab. Die Untersuchungen schließen mit Experimenten an C3S-Pasten (w/f-Wert = 0,50), die die Beobachtungen an den verdünnten Suspensionen bestätigen und infolge der Beschallung ein früheres Auftreten und einen größeren Anteil an C-S-H Phasen zeigen. Es wird gefolgert, dass die unmittelbar infolge von Ultraschall erzeugten C-S-H Phasen als Kristallisationskeim während der folgenden Reaktion dienen und daher Ultraschall als in-situ Keimbildungstechnik angesehen werden kann. Optisch zeigt sich, dass die C-S-H Phasen der beschallten Pasten nicht nur viel früher auftreten, sondern kleiner sind und fein verteilt über die Oberfläche des C3S vorliegen. Auch dieser Effekt wird als vorteilhaft für den sich anschließenden regulären Strukturaufbau angesehen. Im nächsten Schritt wird daher der Untersuchungsfokus vom Modellsystem mit C3S auf Portlandzement erweitert. Hierbei wird der Frage nachgegangen, wie sich eine Änderung der Zusammensetzung der Zementsuspension (w/z-Wert, Fließmittelmenge) beziehungsweise eine Änderung des Ultraschallenergieeintrag auf die Fließeigenschaften und das Erhärtungsverhalten auswirken. Um den Einfluss verschiedener Faktoren gleichzeitig zu betrachten, werden mit Hilfe von statistischen Versuchsplänen Modelle erstellt, die das Verhalten der einzelnen Faktoren beschreiben. Zur Beschreibung der Fließeigenschaften wurde das Setzfließ- und Ausbreitmaß von Zementsuspensionen herangezogen. Die Beschleunigung der Erhärtung wurde mit Hilfe der Ermittlung des Zeitpunkts des normalen Erstarrens der Zementsuspension bestimmt. Die Ergebnisse dieser Untersuchungen zeigen deutlich, dass die Fließeigenschaften und der Erstarrungsbeginn nicht linear mit steigendem Ultraschall-Energieeintrag verändert werden. Es zeigt sich, dass es besonders bei den Verarbeitungseigenschaften der Portlandzementsuspensionen zur Ausbildung eines spezifischen Energieeintrages kommt, bis zu welchem das Setzfließ- und das Ausbreitmaß erhöht werden. Bei Überschreiten dieses Punktes, der als kritischer Energieeintrag definiert wurde, nimmt das Setzfließ- und Ausbreitmaß wieder ab. Das Auftreten dieses Punktes ist im besonderen Maße abhängig vom w/z-Wert. Mit sinkendem w/z-Wert wird der Energieeintrag, der eine Verbesserung der Fließeigenschaften hervorruft, reduziert. Bei sehr niedrigen w/z-Werten (< 0,35), kann keine Verbesserung mehr beobachtet werden. Wird Fließmittel vor der Beschallung zur Zementsuspension zugegeben, können die Eigenschaften der Zementsuspension maßgeblich beeinflusst werden. In beschallten Suspensionen mit Fließmittel, konnte in Abhängigkeit des Energieeintrages die fließmittelbedingte Verzögerung des Erstarrungsbeginns deutlich reduziert werden. Weiterhin zeigt sich, dass der Energieeintrag, der notwendig ist um den Erstarrungsbeginn um einen festen Betrag zu reduzieren, bei Suspensionen mit Fließmittel deutlich reduziert ist. Auf Grundlage der Beobachtungen an Zementsuspensionen wird der Einfluss von Ultraschall in einen dispergierenden und einen beschleunigenden Effekt unterteilt. Bei hohen w/z-Werten dominiert der dispergierende Einfluss von Ultraschall und der Erstarrungsbeginn wird moderat verkürzt. Bei niedrigeren w/z-Werten der Zementsuspension, dominiert der beschleunigende Effekt wobei kein oder sogar ein negativer Einfluss auf die Verarbeitungseigenschaften beobachtet werden kann. Im nächsten Schritt werden die Untersuchungen auf den Betonmaßstab mit Hilfe einer Technikumsanlage erweitert und der Einfluss eines zweistufigen Mischens (also dem Herstellen einer Zementsuspension im ersten Schritt und dem darauffolgenden Vermischen mit der Gesteinskörnung im zweiten Schritt) mit Ultraschall auf die Frisch- und Festbetoneigenschaften betrachtet. Durch die Anlagentechnik, die mit der Beschallung größerer Mengen Zementsuspension einhergeht, kommen weitere Einflussfaktoren auf die Zementsuspension hinzu (z. B. Pumpgeschwindigkeit, Temperatur, Druck). Im Rahmen der Untersuchungen wurde eine Betonrezeptur mit und ohne Ultraschall hergestellt und die Frisch- und Festbetoneigenschaften verglichen. Darüber hinaus wurde ein umfangreiches Untersuchungsprogramm zur Ermittlung wesentlicher Dauerhaftigkeitsparameter durchgeführt. Aufbauend auf den Erfahrungen mit der Technikumsanlage wurde das Ultraschall-Vormischsystem in mehreren Stufen weiterentwickelt und abschließend in einem Betonwerk zur Betonproduktion verwendet. Die Untersuchungen am Beton zeigen eine deutliche Steigerung der Frühdruckfestigkeiten des Portlandzementbetons. Hierbei kann die zum Entschalen von Betonbauteilen notwendige Druckfestigkeit von 15 MPa deutlich früher erreicht werden. Das Ausbreitmaß der Betone (w/z-Wert = 0,47) wird infolge der Beschallung leicht reduziert, was sich mit den Ergebnissen aus den Untersuchungen an reinen Zementsuspensionen deckt. Bei Applikation eines Überdruckes in der Beschallkammer oder einer Kühlung der Suspension während der Beschallung, kann das Ausbreitmaß leicht gesteigert werden. Allerdings werden die hohen Frühdruckfestigkeiten der ungekühlten beziehungsweise drucklosen Variante nicht mehr erreicht. In den Untersuchungen kann gezeigt werden, dass das Potential durch die Ultraschall-Beschleunigung genutzt werden kann, um entweder die Festigkeitsklasse des Zementes leitungsneutral zu reduzieren (von CEM I 52,5 R auf CEM I 42,5 R) oder eine 4-stündige Wärmebehandlung vollständig zu substituieren. Die Dauerhaftigkeit der Betone wird dabei nicht negativ beeinflusst. In den Untersuchungen zum Sulfat-, Karbonatisierung-, Chlorideindring- oder Frost/Tauwiderstand kann weder ein positiver noch ein negativer Einfluss durch die Beschallung abgeleitet werden. Ebenso kann in einer Untersuchung zur Alkali-Kieselsäure-Reaktion kein negativer Einfluss durch die Ultraschallbehandlung beobachtet werden. In den darauf aufbauenden Untersuchungen wird die Anlagentechnik weiterentwickelt, um die Ultraschallbehandlung stärker an eine reale Betonproduktion anzupassen. In der ersten Iterationsstufe wird das in den Betonuntersuchungen verwendete Anlagenkonzept 1 modifiziert (von der In-line-Beschallung zur Batch-Beschallung) und als Analgenkonzept 2 für weitere Untersuchungen genutzt. Hierbei wird eine neue Betonrezeptur mit höherem w/z-Wert (0,52) verwendet, wobei die Druckfestigkeiten ebenfalls deutlich gesteigert werden können. Im Gegensatz zum ersten Beton, wird das Ausbreitmaß dieser Betonzusammensetzung gesteigert, was zur Reduktion von Fließmittel genutzt wird. Dies deckt sich ebenfalls mit den Beobachtungen an reinen Portlandzementsuspensionen, wo eine deutliche Verbesserung der Fließfähigkeit bei höheren w/z-Werten beschrieben wird. Für diese Betonrezeptur wird ein Vergleich mit einem kommerziell erhältlichen Erhärtungsbeschleuniger (synthetische C-S-H-Keime) angestellt. Hierbei zeigt sich, dass die Beschleunigungswirkung beider Technologien vergleichbar ist. Eine Kombination beider Technologien führt zu einer weiteren deutlichen Steigerung der Frühfestigkeiten, so dass hier von einem synergistischen Effekt ausgegangen werden kann. In der letzten Iterationsstufe, dem Anlagenkonzept 3, wird beschrieben, wie das Mischsystem im Rahmen einer universitären Ausgründung signifikant weiterentwickelt wird und erstmals in einem Betonwerk zur Betonproduktion verwendet wird. Bei den Überlegungen zur Weiterentwicklung des Ultraschall-Mischsystems wird der Fokus auf die Praktikabilität gelegt und gezeigt, dass das ultraschallgestütze Mischsystem die Druckfestigkeitsentwicklung auch im Werksmaßstab deutlich beschleunigen kann. Damit ist die Voraussetzung für eine ökologisch nachhaltige Optimierung eines Fertigteilbetons unter realen Produktionsbedingungen geschaffen worden. N2 - In the past years efficiency and sustainability as well as digitalization has come into focus for many different industries due to environmental and cultural changes. Compared to industries like IT, automotive or machine manufacturing, the building industry is still at the very beginning. Although, due to the large quantities of materials processed, the potential for savings and optimization is especially high in the construction industry. The international discussion on resources and climate is increasingly leading to new concepts being developed and tested in cement and concrete production. On one hand, intensive research and development is taking place in the area of alternative, climate-friendly cements. On the other hand, innovative concepts, like for example 3D-printing, are being tested in concrete production. Due to the construction, quality and durability requirements of buildings, precast concrete elements often have advantages compared to ready-mixed concrete. The high surface quality, durability, as well as the uniformity and weather-independent production are advantages that are repeatedly mentioned when speaking about precast concrete elements. It is necessary though, to discuss the concrete production process in the precast plant to make an efficient and sustainable production of precast concrete elements possible. Precast concrete producers mainly focus on optimizing early strength development. Fast hardening concrete is required for the demolding cycle, to enable shift work in production. Often, to ensure high early strengths, highly reactive cements are used in combination with high cement contents in the concrete and/or heat treatment. This contradicts a sustainable concrete concept. In this thesis, a new method for mixing concrete is discussed. Here, the reactive components of the concrete, cement and water, are pre-treated with ultrasound. Previous investigations on the influence of ultrasound on C3S and cement are the starting point of this work. These are further investigated in as part of this work. Furthermore, the production of concrete with ultrasound is investigated in a pilot scale. The gained experiences were used to further develop the ultrasonic concrete mixing system. Finally, the application of this technology in industrial concrete production is discussed. In this work, the effects of ultrasound on the hydration of C3S are further investigated. For this purpose, the hydration of sonicated suspensions is monitored by measuring the electrical conductivity, analysing the ion concentration by means of ICP-OES, thermal analysis, measuring the BET surface and an optical evaluation by means of scanning electron microscopy (SEM). The focus is on the first hours of hydration. During this time the hydration is most strongly influenced by the ultrasound treatment. The investigations show that the acceleration effect in diluted suspensions (w/s value = 50) is strongly dependent on the portlandite concentration of the solution. The lower the portlandite concentration, the greater the acceleration. Supplementary investigations of the ion concentration of the solution as well as investigations on hydrated C3S show, that first hydrate phases are observable immediately after sonication. The acceleration induced by ultrasound is strongest within the first 24 hours, gradually decreasing beyond this time. The investigations are concluded with experiments on C3S pastes (w/f value = 0.50), which confirm the observations on the diluted suspensions and show an earlier appearance and a greater number of C-S-H phases as a result of sonication. Visually, the C-S-H phases of the sonicated pastes do not only appear much earlier, they are also smaller and finely distributed over the surface of the C3S. In the next step, the focus of the investigation is extended from the model system with C3S to Portland cement. The question to be discussed is how different compositions of the cement suspension (w/c-ratio, amount of superplasticiser) or a change in the ultrasonic energy input affects the flow properties and the hardening behaviour. To consider the influence of different factors simultaneously, models are developed with design of experiments (DoE), which describes the behavior of the individual factors. To describe the workability, the slump of cement suspensions was determined. The acceleration of setting was measured by determining the time of normal setting of the cement suspension. The results of these investigations clearly show that the flow properties and the set time do not change linearly with increasing energy input. It is shown that there is a threshold of the specific energy input up to which the slump is increased. When this point, which is defined as the critical energy input, is exceeded, the slump decreased. The occurrence of this point is particularly dependent on the w/c ratio. As the w/c ratio decreases, the energy input that causes an improvement in the flow properties is reduced. At very low w/c-values (< 0.35), no improvement can be observed. If superplasticiser is added to the cement suspension before sonication, the properties of the cement suspension can be significantly influenced. In sonicated suspensions with superplasticiser, the superplasticiser-induced delay of the set time could be significantly reduced depending on the energy input. Furthermore, the energy input required to reduce the time of solidification is significantly reduced in suspensions with superplasticiser. Based on the observations on cement suspensions, the influence of ultrasound is divided into a dispersing and an accelerating effect. At high w/c-values, the dispersing effect of ultrasound dominates, and the set time is moderately decreased. At lower w/c-values of the cement suspension, the accelerating effect dominates, whereas no or even a negative influence on the workability can be observed. In the next step, the investigations will be extended to the concrete scale with the help of a laboratory plant. Here, the influence of two-stage mixing with ultrasound on the fresh and hardened concrete properties will be discussed. Due to the system set up, which goes hand in hand with the sonication of larger quantities of cement suspension, added further influencing factors to the cement suspension (e.g., Pumping speed, temperature, pressure). As part of the investigations, a concrete composition was produced with as well as without ultrasonic premixing and the fresh and hardened concrete properties were compared. In addition, a comprehensive investigation programme was undertaken to determine essential durability parameters. Based on the experiences with the laboratory device, the ultrasonic premixing system was further developed in several stages and finally used in an industrial concrete plant for concrete production. The results of the concrete investigations examine a significant increase in the early compressive strengths of Portland cement concrete. Here, the compressive strength of 15 MPa, which is required for stripping of concrete components, can be achieved significantly earlier. The slump of the concretes (w/c-value = 0.47) is slightly decreased as a result of sonication, which is in accordance with the results of the investigations on cement suspensions. If an overpressure is applied in the sonication chamber or the suspension is cooled during sonication, the slump can be slightly increased. However, the high early compressive strengths of the non-cooled or non-pressured concrete are no longer achieved. the investigations show that the acceleration potential can be used to either reduce the strength class of the cement without performance loss (e. g. from CEM I 52.5 R to CEM I 42.5 R) or to completely substitute a 4-hour heat treatment. The durability of the concrete is not affected. In the investigations on sulphate, carbonation, chloride penetration or freeze/thaw resistance, neither a positive nor a negative influence can be derived from sonication. Likewise, in an investigation on alkali-silica reaction, no negative influence can be observed due to ultrasonic premixing. Based on these investigations, the ultrasound mixing technology will be further developed in order to decrease the gap between laboratory and industrial production. In the first iteration, the system concept 1 used in the concrete investigations will be modified and used subsequently as system concept 2 for further tests. Here, a new concrete composition with a higher w/c ratio (0.52) is used, through which the compressive strengths can also be significantly increased. In contrast to the first concrete, the slump of this concrete composition is increased, which is used to reduce superplasticiser. This is also in accordance with the observations on Portland cement suspensions, where a clear improvement of the flowability at higher w/c-values is described. For this concrete formulation, a comparison is made with a commercially available hardening accelerator (synthetic C-S-H-seeds). The results show that the acceleration effect of both technologies is comparable. A combination of both technologies leads to a further significant increase in early strength, so a synergistic effect can be assumed. The last iteration stage, the system concept 3, describes how the mixing system is significantly developed within a university spin-off and is used for the first time in a concrete plant for concrete production. The conceptual design of the ultrasonic mixing system for industrial application, focusses on the practicability.it is shown that the mixing system can significantly accelerate the compressive strength development, even in an industrial scale. These results paves the way for optimising precast concrete in terms of sustainability. KW - Beton KW - Beton KW - Nachhaltigkeit KW - Ultraschall Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48919 ER - TY - RPRT A1 - Müller, Christoph A1 - Seidel, Maik A1 - Ludwig, Horst-Michael A1 - Müller, Matthias T1 - Prüfung des Frost-Tausalz-Widerstandes von Beton für die Expositionsklasse XF2 N2 - In cold and moderate climates concrete can be subjected to a combined salt frost attack, which can cause scaling damage. Consequently, numerous test procedures were developed to determine the resistance of concrete compositions against this kind of attack. These tests typically mimic a severe attack with high levels of saturation, e.g. as for concrete pavements. Very few approaches exist for testing the salt frost scaling resistance of concretes, which are subjected only to medium levels of saturation, as such concrete elements typically don’t show notable scaling damage. However, the increasing use of low carbon cements with high clinker substitution rates might affect the salt frost scaling resistance of such concrete elements to some extent. To ensure adequate durability of such concretes it is thus desirable to determine their performance in an actual test procedure instead of relying on past experience. Thus, less severe test methods was developed, which are based on the Slab test and the CDF test, repectively. N2 - In kalten und gemäßigten Klimazonen kann Beton einem kombinierten Frost-Tausalz-Angriff ausgesetzt sein, der zu Schäden in Form von Abwitterungen führen kann. Daher wurden zahlreiche Prüfverfahren entwickelt, um die Widerstandsfähigkeit von Betonzusammensetzungen gegen diese Art des Angriffs zu bestimmen. Diese Tests simulieren in der Regel einen starken Angriff mit hohen Sättigungsgraden, wie z. B. bei Betonfahrbahnen. Es gibt nur sehr wenige Ansätze für die Prüfung des Widerstands von Betonen, die nur einem mittleren Sättigungsgrad ausgesetzt sind, da solche Betonelemente in der Regel keine nennenswerten Abwitterungen aufweisen. Die zunehmende Verwendung von klinkereffizienten Zementen könnte sich jedoch in gewissem Maße auf den Frost-Tausalz-Widerstand solcher Betonelemente auswirken. Um eine angemessene Dauerhaftigkeit zu gewährleisten ist es daher wünschenswert, ihre Leistungsfähigkeit in einem tatsächlichen Prüfverfahren zu ermitteln, anstatt sich auf Erfahrungswerte zu verlassen. Daher wurden Ansätze für abgeschwächte Prüfverfahren entwickelt, die auf dem Slab-Test bzw. dem CDF-Test beruhen. KW - Beton KW - Frost KW - Prüfverfahren KW - Beton KW - Frost-Tausalz-Widerstand KW - XF2 KW - CDF KW - Slab-Test Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240226-48877 ER - TY - CHAP A1 - Gründel, Hendrik A1 - Ludwig, Horst-Michael A1 - Geisenhanslüke, Carsten A1 - Müller, Matthias T1 - Einfluss der Zusammensetzung von Portlandzementklinker und Sulfatträger auf das Erstarrungsverhalten von Spritzbeton T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung : 16.-18. September 2015, Weimar N2 - In der vorliegenden Studie wurde der Einfluss der Klinkerzusammensetzung sowie der Sulfatträgerart auf die Leistungsfähigkeit eines Spritzzementes untersucht. Um eine Untersulfatisierung im System mit einen Aluminiumsulfat / -hydroxid Beschleuniger zu vermeiden, sollte ein anhydritbasierter Sulfatträger eingesetzt werden. Dies führt zu einer besseren Festigkeitsentwicklung im jungen Alter. N2 - In the present study, the influence of the clinker composition as well as the setting agent type on the performance of a sprayed cement was investigated. To avoid undersulfatization in the system with an aluminum sulfate/hydroxide accelerator, an anhydrite-based setting agent should be used. This leads to a better strength development at a young age. KW - Beton KW - Spritzbeton KW - Zement KW - Spritzbeton KW - Spritzzement KW - Sulfatträger KW - Sprayed concrete KW - Setting agent Y1 - 2015 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.4885 ER - TY - INPR A1 - Schwendner, Sascha A1 - Fischer, Jens A1 - Seim, Werner A1 - Engelmann, Iris T1 - Nägel im Holzbau – Die Erforschung des Trag- und Verformungsverhaltens N2 - Die Tragfähigkeit von Nägeln und Nagelverbindungen im Holzbau war lange Zeit ausschließlich über Tabellen, die auf experimentellen Untersuchungen basierten, geregelt. In den letzten 100 Jahren untersuchten unterschiedliche Forscher das Last-Verformungsverhalten dieser Verbindungen und entwickelten Modelle, mit denen auf Grundlage von analytischen Gleichungen die Tragfähigkeit und das Verformungsverhalten von Nägeln berechnet werden kann. Die zunächst in Not- und Sparkonstruktion eingesetzten Nägel werden heutzutage vor allem bei Tafelelementen verwendet. Im Bestand finden sich aber auch zahlreiche, teils weit gespannte Fachwerkkonstruktionen. In dem folgenden Beitrag werden die Erforschung und Entwicklung der Tragfähigkeit sowie des Verformungsverhaltens von genagelten Verbindungen detailliert und strukturiert erläutert. Die zugehörigen Meilensteine werden genauer betrachtet. Über unterschiedliche Methoden für die Bestimmung der Tragfähigkeit sowie mechanische Phänomene, die erst nach und nach entdeckt wurden, können in der aktuellen Normung sehr individuelle Verbindungen nachgewiesen und deren Verhalten beschrieben werden. Tabellen und Grafiken verdeutlichen die einzelnen Meilensteine der geschichtlichen Entwicklung und vergleichen konkret die normativen Regelungen seit Beginn der Einführung des Nagels in den Ingenieurholzbau in Deutschland. Hierbei kann gezeigt werden, dass einige Definitionen seit 1933 bis heute noch ihre Gültigkeit behalten. N2 - For a long time, the load-carrying capacity of nails and nail connections in timber structures was regulated only by tables based on experimental investigations. In the last 100 years, different researchers investigated the load-deformation behaviour of these connections and developed models with which the load-carrying capacity and deformation behaviour of nails can be estimated very precisely on the basis of analytical equations. At first used in material saving construction in economical difficult times, nails are nowadays ever-present in modern engineered timber structures. In the following article, the research and development of nail load-carrying capacity and its deformation behaviour will be basically explained, and the milestones will be examined in detail. Using different methods to consider mechanical phenomena, which were only discovered over time, individual connections can be verified in the current standards and their behaviour can be described. Tables and graphics illustrate the milestones of the historical development and specifically compare the normative regulations since the introduction of the nail in engineered timber construction in Germany. Here it can be shown that some definitions since 1933 still retain their relevance today. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48904 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Fischer, Jens A1 - Schwendner, Sascha A1 - Seim, Werner A1 - Engelmann, Iris T1 - Verbindungen mit Nägeln im Holzbau – Die Erforschung und Entwicklung von Konstruktionsregeln N2 - Der Nagel als tragendes Holzverbindungsmittel ist heute gut bekannt. Doch noch vor 100 Jahren war das anders: sein statisch konstruktiver Gebrauch war verboten. Das änderte sich mit Beginn dessen Erforschung Ende der 1920er Jahre. Seit 1933 ist der Nagel Bestandteil der deutschen Regelwerke und findet seitdem breite Verwendung. Über weite Teile des 20. Jahrhunderts diente er in Not- und Sparkonstruktionen wie Brett- und Bohlenbindern als hocheffizientes Verbindungsmittel der Wahl. Diese materialsparenden Tragwerke waren bei der periodisch im-mer wiederkehrenden Ressourcenknappheit sehr gefragt und sind ein wichtiger Bestandteil der Konstruktionsgeschichte des Holzbaus. In dem folgenden Beitrag wird die Erforschung des Na-geltragverhaltens und die einhergehende fortlaufende Normierung behandelt. Die Errungen-schaften einzelner Forschungsvorhaben werden vorgestellt. Anhand eines Zeitstrahls werden Zusammenhänge zwischen Forschung und Normung gezeigt. Tabellen und Grafiken verdeutli-chen die Änderungen innerhalb der Normen von der ersten DIN 1052 im Jahr 1933 über die erste eigenständige Holzbaunorm in der DDR, der TGL 112-0730, aus 1963 bis zur DIN 1052- 1988. Dabei wird immer Bezug zum derzeitigen Entwurf des Eurocode 5 genommen. Allgemein zeigt sich, dass ein Großteil der heutigen Kenntnisse immer noch auf die Grundlagenforschung der 1930er Jahre zurückgeht. N2 - The nail as a load-bearing timber fastener is well known today. But 100 years ago, it was different: its structural use was not allowed. This changed with the beginning of systematical research at the end of the 1920s. Since 1933, the nail has been part of the German regulations and has been widely used ever since. For much of the 20th century, it served as the highly efficient fastener of choice especially in roof structures such as board and plank trusses. These material-saving load-bearing structural elements were always in demand due to the periodically recurring scarcity of material resources and are an important part in con-struction history. The following article deals with the research of the load-bearing behaviour of nails and the standardisation that has constantly accompanied it. The achievements of individual research projects are presented. A timeline shows the connections between research and standardisation. Tables and graphics illustrate the changes within the standards from the first DIN 1052 in 1933 to the first independent timber construction standard in the DDR, TGL 112-0730, from 1963 to DIN 1052-1988. Reference is al-ways made to the Eurocode 5 valid today. In general, it can be seen that a large part of today's knowledge still goes back to the basic research of the 1930s. KW - Ingenieurholzbau KW - Holz-Holz-Verbindungen KW - Nagel KW - Experimentelle Untersuchungen KW - DIN 1052 KW - TGL Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48893 N1 - This is the pre-peer reviewed version. ER - TY - INPR A1 - Engelmann, Iris A1 - Schwendner, Sascha A1 - Seim, Werner T1 - Materialsparende Nagelbinder – Aspekte der Konstruktionsgeschichte von 1930 bis 1990 N2 - Materialsparende Holzkonstruktionen, die insbesondere während der Kriegs- und Nachkriegszeit im 20. Jahrhundert entwickelt und optimiert wurden, erlangen aktuell aus konstruktionshistorischer Sicht, aber auch aus ökonomischer Sicht erneut Interesse. Der vorliegende Beitrag gibt einen Überblick angefangen von den ersten Konstruktionen Ende der 1920er Jahre bis hin zu Typenbindern der DDR, die noch bis 1990 über Landwirtschaftsbauten errichtet wurden und heute oft als Tragkonstruktionen für Photovoltaikanlagen weiterverwendet werden. Der Fokus liegt auf der chronologischen Vorstellung ausgewählter Konstruktionsweisen für Hallen- und Hausdächer unterschieden nach Fachwerk- und Vollwandbindern. Sowohl die verantwortlichen Ingenieure und deren Herkunft, sowie wesentliche Anwendungsfelder und Beispielbauten kommen in der Überblicksdarstellung zur Sprache. Eine wesentliche Erkenntnis ist die im Betrachtungszeitraum 1930 bis 1990 zu verzeichnende Reduzierung einer Vielzahl genagelter Spar- hin zu Typenkonstruktionen, die im wesentlichen äußerst materialeffiziente Fachwerkbinder für Satteldächer hervorbrachte. N2 - Material-saving wooden constructions, which were developed and optimized in particular during the war and post-war period in the 20th century, are currently attracting renewed interest from the point of view of construction history, but also from an economic point of view. The article gives an overview starting with the first constructions at the end of the 1920s up to the type trusses of the GDR, which were built over agricultural buildings until 1990 and are often used today as supporting structures for photovoltaic systems and are therefore experiencing a renaissance. The focus of the article is on the chronological presentation of selected construction methods for hall and house roofs, differentiated between timbered and solid wall trusses. Both the responsible engineers and their origin, as well as essential fields of application and example buildings are discussed in the overview. A significant finding is the reduction in the period from 1930 to 1990 from a large number of nailed savings to type constructions, which essentially produced extremely material-efficient timber trusses for gable roofs. KW - Ingenieurholzbau KW - Nagelverbindung KW - Nagelbrettbinder KW - Kantholzbinder KW - Vollwandbinder KW - Fachwerkbinder KW - Sparkonstruktion Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230112-48882 N1 - This is the pre-peer reviewed version. ER - TY - THES A1 - Held, Tobias T1 - Einblick: Gestalterische Potentiale und Perspektiven der Videotelefonie im Kontext von Nähe und Distanz. Eine praxis-basierte, (re-)kontextualisierende und diskursanalytische Studie. N2 - Inhaltlich beschäftigt sich die Arbeit, die im Rahmen des Promotionsstudiengangs Kunst und Gestaltung an der Bauhaus-Universität entstand, mit der Erforschung sozio-interaktiver Potentiale der Videotelefonie im Kontext von Nähe und Verbundenheit mit Fokus auf Eigenbild, Embodiment sowie den Rederechtswechsel. Die Videotelefonie als Kommunikationsform hat sich – und darauf deuten die Erfahrungen der Co- vid-19-Pandemie hin – im lebensweltlichen Alltag der Menschen etabliert und wird dort in naher Zukunft nicht mehr wegzudenken sein. Auf Basis ihrer Möglichkeiten und Errungenschaften ist es inzwischen Realität und Lebenswirklichkeit, dass die Kommunikation sowohl im privaten als auch im geschäftlichen Kontext mittels verschiedenster Kanäle stattfindet. Der Videotelefonie kommt hierbei als solche nicht nur eine tragende Funktion, sondern auch eine herausragende Rolle bei der vermeintlichen Reproduktion der Face-to-Face-Kommunikation im digitalen Raum zu und wird wie selbstverständlich zum zwischenmenschlichen Austausch genutzt. Just an diesem Punkt knüpft die Forschungsarbeit an. Zentral stand dabei das Vorhaben einer dezidierte Untersuchung des Forschungsgegenstandes Videotelefonie, sowohl aus Kultur- als auch Technikhistorischer, aber auch Medien-, Wahrnehmungs- wie Kommunikations- theoretischer Perspektive, indem analytische und phänosemiotische Perspektiven miteinander in Beziehung gesetzt werden (z.B. Wahrnehmungsbedingungen, Interaktionsmerkmale, realisierte Kommunikationsprozesse etc.). Damit verbundenes, wünschenswertes Ziel war es, eine möglichst zeitgemäße wie relevante Forschungsfrage zu adressieren, die neben den kulturellen Technisierungs- und Mediatisierungstendenzen in institutionellen und privaten Milieus ebenfalls eine conditio sine qua non der pandemischen (Massen-)Kommunikation entwirft. Die Arbeit ist damit vor allem im Bereich des Produkt- und Interactiondesigns zu verorten. Darüber hinaus hatte sie das Ziel der Darlegung und Begründung der Videotelefonie als eigenständige Kommunikationsform, welche durch eigene, kommunikative Besonderheiten, die sich in ihrer jeweiligen Ingebrauchnahme sowie durch spezielle Wahrnehmungsbedingungen äußern, und die die Videotelefonie als »Rederechtswechselmedium« avant la lettre konsolidieren, gekennzeichnet ist. Dabei sollte der Beweis erbracht werden, dass die Videotelefonie nicht als Schwundstufe einer Kommunikation Face-to-Face, sondern als ein eigenständiges Mediatisierungs- und Kommunikationsereignis zu verstehen sei. Und eben nicht als eine beliebige – sich linear vom Telefon ausgehende – entwickelte Form der audio-visuellen Fernkommunikation darstellt, sondern die gestalterische (Bewegtbild-)Technizität ein eigenständiges Funktionsmaß offeriert, welches wiederum ein innovatives Kommunikationsmilieu im Kontext einer Rederechtswechsel-Medialität stabilisiert. KW - Videotelefonie KW - Designforschung KW - Medienforschung KW - Videokonferenz KW - videochat KW - videocall KW - videoconference Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230111-48867 ER - TY - THES A1 - Pacheco Alvim, Sarah T1 - Falsa Seringueira: Rubber Trees and the Materiality of the Unseen N2 - The theme of this project is the colonial history of the natural rubber industry. It focuses on two species of tropical plants: Ficus elastica and Hevea brasiliensis. Geographically their native habitat is very distant from each other, but they connect by European influence through the exploitation of latex. The many forms and outcomes from this work manifest the attempt of the artist to create an association between a common household plant, the origin of its name, and the source of rubber. As a ghostly connective tissue, the latex surrounds reconstructed history, old prints, live plants, and drawings, accepting the material's capacity to both erase and preserve the past. KW - Kautschuk KW - Gummi KW - Kolonialismus KW - Kunst KW - Geschichte KW - art installation KW - colonialism KW - history KW - natural latex KW - rubber industry Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230105-48467 ER - TY - CHAP A1 - Müller, Matthias A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Sulfatangriff magnesiumhaltiger Wässer auf Mörtel unterschiedlicher Zusammensetzung T2 - Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar N2 - Die besondere Aggressivität von hochkonzentrierten Magnesiumsulfatlösungen bei Einwirkung auf Beton ist seit vielen Jahrzehnten bekannt. Neben dem Sulfat greift zusätzlich auch das Magnesium den Zementstein an. Bei hohen Lösungskonzentrationen nimmt der Magnesiumangriff gegenüber dem Sulfatangriff sogar eine dominante Rolle ein. Magnesiumgehalte unter 300 mg/l im Grundwasser gelten allerdings bislang als nicht angreifend. In Auslagerungs- und Laborversuchen wurde jedoch festgestellt, dass auch bei praxisrelevanten Magnesium- (<300 mg/l) und Sulfatgehalten (1.500 mg/l) das Magnesium zu einer deutlichen Verschärfung des Sulfatangriffes bei niedrigen Temperaturen führte. Diese Verschärfung trat bei Mörteln und Betonen auf, bei denen der erhöhte Sulfatwiderstand durch einen teilweisen Zementersatz mit 20 % Flugasche zu einem CEM II/A-LL erreicht werden sollte, gemäß der Flugascheregelung nach EN 206-1/DIN 1045-2. Bei einem teilweisen Zementersatz durch 30 % Flugasche konnte auch in magnesiumhaltigen Sulfatlösungen eine deutliche Verbesserung des Sulfatwiderstandes erreicht werden. Mörtel mit HS-Zement als Bindemittel wiesen keinerlei Schäden auf. Schadensverursachend war eine Kombination mehrerer Einflüsse. Zum einen wurde der Sulfatwiderstand des Zement-Flugasche-Systems durch die unzureichende Reaktion der Flugasche infolge der niedrigen Lagerungstemperatur geschwächt. Zum anderen konnte durch die Einwirkung des Magnesiums in der Randzone vermutlich eine Destabilisierung der C-S-H-Phasen erfolgen, wodurch die Thaumasitbildung an dieser Stelle forciert wurde. Zusätzlich wurde durch den Portlanditverbrauch und die pH-Wert-Absenkung in der Randzone die puzzolanische Reaktion der Flugasche behindert. KW - Beton KW - Beton KW - Sulfatangriff KW - Flugasche KW - Magnesiumsulfat KW - Thaumasit Y1 - 2012 SN - 978-3-00-034075-8 (Bauhaus-Universitätsverlag Weimar) U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.4873 ER - TY - CHAP A1 - Müller, Matthias A1 - Ehrhardt, Dirk A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Optimierung der Nachbehandlung von Waschbetonoberflächen T2 - Tagungsband 18. Ibausil - 18. Internationale Baustofftagung : 12.-15. September 2012, Weimar N2 - Der Nachbehandlung eines Fahrbahndeckenbetons kommt zum Erzielen eines hohen Frost-Tausalz-Widerstandes der fertigen Betondecke eine besondere Bedeutung zu. Bei der Waschbetonbauweise erfolgt die Nachbehandlung in mehreren Schritten. Eine erste Nachbehandlung gewährleistet den Verdunstungsschutz des Betons bis zum Zeitpunkt des Ausbürstens des verzögerten Oberflächenmörtels. Daran schließt sich die zweite Nachbehandlung an, in der Regel durch Aufsprühen eines flüssigen Nachbehandlungsmittels. Der zweite Nachbehandlungsschritt ist entscheidend für den Frost-Tausalz-Widerstand der Betondecke. Im Rahmen eines Forschungsprojektes wurde daher untersucht, inwiefern durch eine Optimierung der zweiten Nachbehandlung der Frost-Tausalz-Widerstand von Waschbetonoberflächen erhöht werden kann, insbesondere bei Verwendung hüttensandhaltiger Zemente. Schon durch eine einmalige Nassnachbehandlung wurde eine deutlich höherer Widerstand der Waschbetons gegen Frost-Tausalz-Angriff erzielt. KW - Beton KW - Straßenbeton KW - Waschbeton KW - Nachbehandlung KW - Frost-Tausalz-Widerstand Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240226-48722 SN - 978-3-00-034075-8 ER - TY - CHAP A1 - Mueller, Matthias A1 - Ludwig, Horst-Michael A1 - Schulte-Schrepping, Christoph A1 - Breitenbücher, Rolf ED - Ludwig, Horst-Michael T1 - Dauerhafte Betonfahrbahndecken durch Verwendung unterschiedlicher Bindemittel in Ober- und Unterbeton T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2 N2 - Gemäß dem Regelwerk für Betonstraßen muss für zweischichtige Betonfahrbahndecken derselbe Zement in Ober- und Unterbeton verwendet werden. Weiterhin ist die Anrechnung von Flugasche auf den w/z-Wert nicht gestattet. Durch eine flexiblere Handhabung der Bindemittel könnten sich Vorteile für die Betonbauweise ergeben. So könnte z.B. der stärker durch Frost beanspruchte Oberbeton mit CEM I hergestellt werden, während Zemente mit höheren Hüttensandgehalten nur im Unterbeton angewendet werden. Im Unterbeton könnten dann Gesteinskörnungen eingesetzt werden, die in einer herkömmlichen CEM I-Rezeptur als AKR-kritisch eingestuft würden. Anhand von AKR-Performance-Prüfungen konnte die hohe Wirksamkeit hüttensandhaltiger Zemente sowie auch von Flugasche auf die AKR-Verminderung aufgezeigt werden. Schon mit einem CEM II/B-S wurden AKR-kritische Rezepturen in den unkritischen Bereich verschoben. Der Frost-Tausalz-Widerstand der Betone wurde bei hohen Gehalten an Hüttensand bzw. Hüttensand + Flugasche verringert, bewegte sich aber in jedem Fall noch im günstigen Bereich. Um eine Beeinträchtigung der baupraktischen Umsetzbarkeit zu vermeiden, sollte sich die Festigkeitsentwicklung von Ober- und Unterbeton im jungen Alter nicht zu stark unterscheiden. Modellberechnungen zur Festlegung einer Mindestfestigkeit für die frühe Belastung sind derzeit noch in Bearbeitung. KW - Beton KW - Betonstraße KW - Zementart KW - Alkali-Kieselsäure-Reaktion Y1 - 2015 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.4871 ER - TY - CHAP A1 - Müller, Matthias A1 - Ludwig, Horst-Michael A1 - Ben Haha, Mohsen A1 - Zajac, Maciej ED - Ludwig, Horst-Michael T1 - Optimization of multi-component cements containing clinker, slag, V-fly ash, limestone T2 - Tagungsband 19. Ibausil - 19. Internationale Baustofftagung, 16. - 18.09.2015, Weimar. Band 2 N2 - The aim of this study was to investigate the optimization of the strength development of quaternary cements with 50 % clinker by a variation of the particle size distribution of the components GGBFS, fly ash and limestone powder. By balancing the overall PSD of the cement by using unprocessed fly ash and coarse limestone powder in combination with a very fine GGBFS, the water demand of the resulting quaternary cements remained unaltered, while the compressive strength of the cements was increased significantly after 7d, 28 and 56d. As can be expected, the quaternary cement with 30 wt.% of the fine slag exhibited a stronger strength increase (about 18 % after 28 d) than the cements with only 20 wt.% slag (about 10% after 28d). KW - Zement KW - Cement KW - Slag KW - Fly ash KW - Limestone powder KW - Particle size distribution Y1 - 2015 SN - 978-3-00-050225-5 (Bauhaus-Universitätsverlag Weimar) U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.4870 ER - TY - CHAP A1 - Mueller, Matthias A1 - Ludwig, Horst-Michael ED - Ludwig, Horst-Michael T1 - Neue Modelle für den Frost-Tausalz-Angriff auf Beton T2 - Tagungsbericht, 20. Ibausil - 20. Internationale Baustofftagung, 12. - 14. September 2018, Weimar, Teil 1 N2 - Für den Frost-Tausalz-Angriff auf Beton existiert eine Reihe von Schadenstheorien. Drei aktuelle Theorien nehmen für sich in Anspruch, den Schadensmechanismus und insbesondere den Einfluss niedrig konzentrierter Tausalzlösungen auf den Schädigungsgrad gut abbilden zu können. Die Glue Spall-Theorie sowie die Cryogenic Suction-Theorie bieten plausible Ansätze. In Untersuchungen konnten einige Modellvorstellungen bestätigt werden, insbesondere der Prozess des kryogenen Saugens. Ob dieser Vorgang oder die mechanische Glue Spall-Belastung tatsächlich schadensauslösend sind, kann anhand der Untersuchungen jedoch noch nicht zweifelsfrei bestätigt oder ausgeschlossen werden. Die Brine Rejection-Theorie zeigt wichtige Prozesse auf, die für die Schädigung bei einem Frost-Tausalz-Angriff relevant sein können. Als alleinstehendes Modell ist es eher nicht geeignet. KW - Beton KW - Beton KW - Frost-Tausalz-Angriff Y1 - 2018 SN - 978-3-00-059950-7 (Bauhaus-Universitätsverlag Weimar) U6 - http://dx.doi.org/10.25643/bauhaus-universitaet.4869 ER - TY - JFULL A1 - Bogner, Simone A1 - Karpf, Michael A1 - Willer, Stefan A1 - Aquilar, Giorgia A1 - Springer, Jörg A1 - Euler-Rolle, Bernd A1 - Sikiaridi, Elizabeth A1 - Vogelaar, Frans A1 - von Beckerath, Verena A1 - Klei, Alexandra A1 - Raheem, Oluwafunminiyi A1 - Grundig, Ronny A1 - Sezer, Özge A1 - Kutkina, Anna A1 - Manka, Inge A1 - Hettchen, Karolina A1 - Jüttner, Monique A1 - Blunk, Julian ED - Bogner, Simone ED - Karpf, Michael ED - Meier, Hans-Rudolf T1 - Praktiken des Erbens. Metaphern, Materialisierungen, Machtkonstellationen N2 - Ausgehend von der Bemerkung des Philosophen Jacques Derrida, dass Erbe immer auch eine Aufgabe sei, widmet sich der dritte Band der Schriftenreihe des Graduiertenkollegs „Identität und Erbe“ den sozialen und kulturellen Praktiken der Bezugnahme auf Vergangenheit(en) und Identität(en). Mit einem (kulturellen) Erbe soll und muss etwas getan werden, um es überhaupt hervorzubringen. Es konstituiert sich erst im Akt des (Nicht-)Erbens, das heißt im Wechselverhältnis mit den mit und an ihm ausgeführten Praktiken. Gleichwohl ermöglicht erst deren Verbindung mit den materiellen Überresten und Überlieferungen des Erbes eine Aneignung oder Ablehnung der Vergangenheit sowie die Fort- und Umschreibung eines bereits bestehenden Erbes. Diese Vorgänge sind nicht willkürlicher Natur: Die Möglichkeiten zur Interpretation und Deutung werden durch die sozialen, politischen, kulturellen, ökonomischen und technischen Bedingungen der Gegenwart sowie durch die Geschichte und Materialität des Erbes beschränkt, erweitert und gelenkt. Erbe und Erbeprozesse müssen deshalb notwendigerweise miteinander in Beziehung gesetzt werden. Mit Beiträgen von Simone Bogner und Michael Karpf, Stefan Willer, Giorgia Aquilar, Jörg Springer, Bernd Euler-Rolle, Elizabeth Sikiaridi und Frans Vogelaar, Verena von Beckerath, Alexandra Klei, Oluwafunminiyi Raheem, Ronny Grundig, Özge Sezer, Anna Kutkina, Inge Manka, Karolina Hettchen und Monique Jüttner sowie Julian Blunk. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 3 KW - Kulturerbe KW - Denkmalpflege KW - Architektur Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220810-47025 PB - Bauhaus-Universitätsverlag CY - Weinstraße-Ilmtal ER - TY - THES A1 - Müller, Matthias T1 - Salt-frost Attack on Concrete - New Findings regarding the Damage Mechanism N2 - The reduction of the cement clinker content is an important prerequisite for the improvement of the CO2-footprint of concrete. Nevertheless, the durability of such concretes must be sufficient to guarantee a satisfactory service life of structures. Salt frost scaling resistance is a critical factor in this regard, as it is often diminished at increased clinker substitution rates. Furthermore, only insufficient long-term experience for such concretes exists. A high salt frost scaling resistance thus cannot be achieved by applying only descriptive criteria, such as the concrete composition. It is therefore to be expected, that in the long term a performance based service life prediction will replace the descriptive concept. To achieve the important goal of clinker reduction for concretes also in cold and temperate climates it is important to understand the underlying mechanisms for salt frost scaling. However, conflicting damage theories dominate the current State of the Art. It was consequently derived as the goal of this thesis to evaluate existing damage theories and to examine them experimentally. It was found that only two theories have the potential to describe the salt frost attack satisfactorily – the glue spall theory and the cryogenic suction theory. The glue spall theory attributes the surface scaling to the interaction of an external ice layer with the concrete surface. Only when moderate amounts of deicing salt are present in the test solution the resulting mechanical properties of the ice can cause scaling. However, the results in this thesis indicate that severe scaling also occurs at deicing salt levels, at which the ice is much too soft to damage concrete. Thus, the inability of the glue spall theory to account for all aspects of salt frost scaling was shown. The cryogenic suction theory is based on the eutectic behavior of salt solutions, which consist of two phases – water ice and liquid brine – between the freezing point and the eutectic temperature. The liquid brine acts as an additional moisture reservoir, which facilitates the growth of ice lenses in the surface layer of the concrete. The experiments in this thesis confirmed, that the ice formation in hardened cement paste increases due to the suction of brine at sub-zero temperatures. The extent of additional ice formation was influenced mainly by the porosity and by the chloride binding capacity of the hardened cement paste. Consequently, the cryogenic suction theory plausibly describes the actual generation of scaling, but it has to be expanded by some crucial aspects to represent the salt frost scaling attack completely. The most important aspect is the intensive saturation process, which is ascribed to the so-called micro ice lens pump. Therefore a combined damage theory was proposed, which considers multiple saturation processes. Important aspects of this combined theory were confirmed experimentally. As a result, the combined damage theory constitutes a good basis to understand the salt frost scaling attack on concrete on a fundamental level. Furthermore, a new approach was identified, to account for the reduced salt frost scaling resistance of concretes with reduced clinker content. T2 - Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus KW - Beton KW - Frost KW - Concrete KW - Salt frost attack KW - Damage mechanism KW - Glue Spall KW - Cryogenic Suction Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230103-48681 UR - https://e-pub.uni-weimar.de/opus4/frontdoor/index/index/docId/4502 N1 - Englische Fassung meiner deutschsprachigen Dissertation mit dem Titel "Frost-Tausalz-Angriff auf Beton - Neue Erkenntnisse zum Schadensmechnismus". ER - TY - JFULL A1 - Bogner, Simone A1 - Gourinovitch, Oxana A1 - Ba, Claudia A1 - Kibel, Jochen A1 - Stapel, Gülşah A1 - Krajewsky, Georg A1 - Frölich-Kulik, Maria A1 - Masoud, Zoya A1 - Wächter, Konstantin A1 - Häger, Benjamin A1 - Höhne, Wolfram A1 - Alberti, Sarah A1 - Trötschel-Daniels, Bianka A1 - Helas, Luise A1 - Selitz, Lisa Marie A1 - Torreiter, Laura ED - Bogner, Simone ED - Dolff-Bonekämper, Gabi ED - Meier, Hans-Rudolf T1 - Instabile Konstruktionen. Interdisziplinäre Forschungen zu »Identität und Erbe« N2 - Wer von Erbe im Zusammenhang mit Identität spricht, verspricht sich und Anderen »Kontinuität« und »Stabilität«. Das Versprechen hält indes nur so lange, wie sich Menschen auf die damit verbundenen Erzählungen einlassen. Da diese zunehmend hinterfragt werden und der Begriff »Identität« im politischen Raum zu einer umkämpften Kategorie avanciert ist, werden auch die lange gehegten, gewohnten »Konstruktionen« instabil. Dies zeigt sich insbesondere in Momenten des Konflikts, der übergriffigen Inanspruchnahme und des Verlusts. Der Titel »Instabile Konstruktionen« verweist zugleich auf die beiden Kernbereiche des Kollegs: einerseits auf Architektur und Denkmalpflege, in denen der Begriff Konstruktion sich auf bauliche Manifestationen bezieht, von denen eine gewisse Haltbarkeit und Dauerhaftigkeit erwartet wird und andererseits auf die Kultur- und Sozialwissenschaften, wo Konstruktion die soziale Herstellung symbolischer Sinnwelten meint. Ins Zentrum rückt so der Anspruch, die materielle Umwelt im Wechselverhältnis zu ihrer sozialen Gemachtheit zu verstehen. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 2 KW - Identität KW - Erbe KW - Instabilität KW - Denkmalpflege KW - Architektur KW - Denkmalpflege, Architektur, Kunst , Kunstgeschichte , Geschichte , Tradition , Stabilität , Dekonstruktion, Identität, Erbe Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220315-46066 PB - Bauhaus-Universitätsverlag CY - Ilmtal-Weinstraße ER -