TY - INPR A1 - Khosravi, Khabat A1 - Sheikh Khozani, Zohreh A1 - Cooper, James R. T1 - Predicting stable gravel-bed river hydraulic geometry: A test of novel, advanced, hybrid data mining algorithms N2 - Accurate prediction of stable alluvial hydraulic geometry, in which erosion and sedimentation are in equilibrium, is one of the most difficult but critical topics in the field of river engineering. Data mining algorithms have been gaining more attention in this field due to their high performance and flexibility. However, an understanding of the potential for these algorithms to provide fast, cheap, and accurate predictions of hydraulic geometry is lacking. This study provides the first quantification of this potential. Using at-a-station field data, predictions of flow depth, water-surface width and longitudinal water surface slope are made using three standalone data mining techniques -, Instance-based Learning (IBK), KStar, Locally Weighted Learning (LWL) - along with four types of novel hybrid algorithms in which the standalone models are trained with Vote, Attribute Selected Classifier (ASC), Regression by Discretization (RBD), and Cross-validation Parameter Selection (CVPS) algorithms (Vote-IBK, Vote-Kstar, Vote-LWL, ASC-IBK, ASC-Kstar, ASC-LWL, RBD-IBK, RBD-Kstar, RBD-LWL, CVPSIBK, CVPS-Kstar, CVPS-LWL). Through a comparison of their predictive performance and a sensitivity analysis of the driving variables, the results reveal: (1) Shield stress was the most effective parameter in the prediction of all geometry dimensions; (2) hybrid models had a higher prediction power than standalone data mining models, empirical equations and traditional machine learning algorithms; (3) Vote-Kstar model had the highest performance in predicting depth and width, and ASC-Kstar in estimating slope, each providing very good prediction performance. Through these algorithms, the hydraulic geometry of any river can potentially be predicted accurately and with ease using just a few, readily available flow and channel parameters. Thus, the results reveal that these models have great potential for use in stable channel design in data poor catchments, especially in developing nations where technical modelling skills and understanding of the hydraulic and sediment processes occurring in the river system may be lacking. KW - Maschinelles Lernen KW - Künstliche Intelligenz KW - Data Mining KW - Hydraulic geometry KW - Gravel-bed rivers Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-44998 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/abs/pii/S1364815221002085 ; https://doi.org/10.1016/j.envsoft.2021.105165 VL - 2021 ER - TY - INPR A1 - Steiner, Maria A1 - Bourinet, Jean-Marc A1 - Lahmer, Tom T1 - An adaptive sampling method for global sensitivity analysis based on least-squares support vector regression N2 - In the field of engineering, surrogate models are commonly used for approximating the behavior of a physical phenomenon in order to reduce the computational costs. Generally, a surrogate model is created based on a set of training data, where a typical method for the statistical design is the Latin hypercube sampling (LHS). Even though a space filling distribution of the training data is reached, the sampling process takes no information on the underlying behavior of the physical phenomenon into account and new data cannot be sampled in the same distribution if the approximation quality is not sufficient. Therefore, in this study we present a novel adaptive sampling method based on a specific surrogate model, the least-squares support vector regresson. The adaptive sampling method generates training data based on the uncertainty in local prognosis capabilities of the surrogate model - areas of higher uncertainty require more sample data. The approach offers a cost efficient calculation due to the properties of the least-squares support vector regression. The opportunities of the adaptive sampling method are proven in comparison with the LHS on different analytical examples. Furthermore, the adaptive sampling method is applied to the calculation of global sensitivity values according to Sobol, where it shows faster convergence than the LHS method. With the applications in this paper it is shown that the presented adaptive sampling method improves the estimation of global sensitivity values, hence reducing the overall computational costs visibly. KW - Approximation KW - Sensitivitätsanalyse KW - Abtastung KW - Surrogate models KW - Least-squares support vector regression KW - Adaptive sampling method KW - Global sensitivity analysis KW - Sampling Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181218-38320 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0951832017311808, which has been published in final form at https://doi.org/10.1016/j.ress.2018.11.015. SP - 1 EP - 33 ER - TY - INPR A1 - Rezakazemi, Mashallah A1 - Mosavi, Amir A1 - Shirazian, Saeed T1 - ANFIS pattern for molecular membranes separation optimization N2 - In this work, molecular separation of aqueous-organic was simulated by using combined soft computing-mechanistic approaches. The considered separation system was a microporous membrane contactor for separation of benzoic acid from water by contacting with an organic phase containing extractor molecules. Indeed, extractive separation is carried out using membrane technology where complex of solute-organic is formed at the interface. The main focus was to develop a simulation methodology for prediction of concentration distribution of solute (benzoic acid) in the feed side of the membrane system, as the removal efficiency of the system is determined by concentration distribution of the solute in the feed channel. The pattern of Adaptive Neuro-Fuzzy Inference System (ANFIS) was optimized by finding the optimum membership function, learning percentage, and a number of rules. The ANFIS was trained using the extracted data from the CFD simulation of the membrane system. The comparisons between the predicted concentration distribution by ANFIS and CFD data revealed that the optimized ANFIS pattern can be used as a predictive tool for simulation of the process. The R2 of higher than 0.99 was obtained for the optimized ANFIS model. The main privilege of the developed methodology is its very low computational time for simulation of the system and can be used as a rigorous simulation tool for understanding and design of membrane-based systems. Highlights are, Molecular separation using microporous membranes. Developing hybrid model based on ANFIS-CFD for the separation process, Optimization of ANFIS structure for prediction of separation process KW - Fluid KW - Simulation KW - Molecular Liquids KW - optimization KW - machine learning KW - Membrane contactors KW - CFD Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181122-38212 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0167732218345008, which has been published in final form at https://doi.org/10.1016/j.molliq.2018.11.017. VL - 2018 SP - 1 EP - 20 ER - TY - INPR A1 - Kavrakov, Igor A1 - Argentini, Tommaso A1 - Omarini, Simone A1 - Rocchi, Daniele A1 - Morgenthal, Guido T1 - Determination of complex aerodynamic admittance of bridge decks under deterministic gusts using the Vortex Particle Method N2 - Long-span bridges are prone to wind-induced vibrations. Therefore, a reliable representation of the aerodynamic forces acting on a bridge deck is of a major significance for the design of such structures. This paper presents a systematic study of the two-dimensional (2D) fluid-structure interaction of a bridge deck under smooth and turbulent wind conditions. Aerodynamic forces are modeled by two approaches: a computational fluid dynamics (CFD) model and six semi-analytical models. The vortex particle method is utilized for the CFD model and the free-stream turbulence is introduced by seeding vortex particles upstream of the deck with prescribed spectral characteristics. The employed semi-analytical models are based on the quasi-steady and linear unsteady assumptions and aerodynamic coefficients obtained from CFD analyses. The underlying assumptions of the semi-analytical aerodynamic models are used to interpret the results of buffeting forces and aeroelastic response due to a free-stream turbulence in comparison with the CFD model. Extensive discussions are provided to analyze the effect of linear fluid memory and quasi-steady nonlinearity from a CFD perspective. The outcome of the analyses indicates that the fluid memory is a governing effect in the buffeting forces and aeroelastic response, while the effect of the nonlinearity is overestimated by the quasi-steady models. Finally, flutter analyses are performed and the obtained critical velocities are further compared with wind tunnel results, followed by a brief examination of the post-flutter behavior. The results of this study provide a deeper understanding of the extent of which the applied models are able to replicate the physical processes for fluid-structure interaction phenomena in bridge aerodynamics and aeroelasticity. KW - Bridge KW - Aerodynamik KW - Ingenieurwissenschaften KW - Aerodynamic admittance KW - Computational fluid dynamics KW - Vortex particle method KW - Buffeting KW - Long-span bridges Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200206-40883 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0167610519305719?via%3Dihub, which has been published in final form at https://doi.org/10.1016/j.jweia.2019.103971 ER - TY - INPR A1 - Kavrakov, Igor A1 - Morgenthal, Guido T1 - Aeroelastic analyses of bridges using a Pseudo-3D vortex method and velocity-based synthetic turbulence generation N2 - The accurate representation of aerodynamic forces is essential for a safe, yet reasonable design of long-span bridges subjected to wind effects. In this paper, a novel extension of the Pseudo-three-dimensional Vortex Particle Method (Pseudo-3D VPM) is presented for Computational Fluid Dynamics (CFD) buffeting analysis of line-like structures. This extension entails an introduction of free-stream turbulent fluctuations, based on the velocity-based turbulence generation. The aerodynamic response of a long-span bridge is obtained by subjecting the 3D dynamic representation of the structure to correlated free-stream turbulence in two-dimensional (2D) fluid planes, which are positioned along the bridge deck. The span-wise correlation of the free-stream turbulence between the 2D fluid planes is established based on Taylor's hypothesis of frozen turbulence. Moreover, the application of the laminar Pseudo-3D VPM is extended to a multimode flutter analysis. Finally, the structural response from the Pseudo-3D flutter and buffeting analyses is verified with the response, computed using the semi-analytical linear unsteady model in the time-domain. Meaningful merits of the turbulent Pseudo-3D VPM with respect to the linear unsteady model are the consideration of the 2D aerodynamic nonlinearity, nonlinear fluid memory, vortex shedding and local non-stationary turbulence effects in the aerodynamic forces. The good agreement of the responses for the two models in the 3D analyses demonstrates the applicability of the Pseudo-3D VPM for aeroelastic analyses of line-like structures under turbulent and laminar free-stream conditions. KW - Bridge KW - Aerodynamik KW - Ingenieurwissenschaften KW - Computational Bridge Aerodynamics KW - Buffeting KW - Flutter KW - Long-span Bridges KW - Vortex Particle Method Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200206-40864 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0141029617322976?via%3Dihub, which has been published in final form at https://doi.org/10.1016/j.engstruct.2018.08.093 ER - TY - INPR A1 - Sheikh Khozani, Zohreh A1 - Kumbhakar, Manotosh T1 - Discussion of “Estimation of one-dimensional velocity distribution by measuring velocity at two points” by Yeganeh and Heidari (2020) N2 - The concept of information entropy together with the principle of maximum entropy to open channel flow is essentially based on some physical consideration of the problem under consideration. This paper is a discussion on Yeganeh and Heidari (2020)’s paper, who proposed a new approach for measuring vertical distribution of streamwise velocity in open channels. The discussers argue that their approach is conceptually incorrect and thus leads to a physically unrealistic situation. In addition, the discussers found some wrong mathematical expressions (which are assumed to be typos) written in the paper, and also point out that the authors did not cite some of the original papers on the topic. KW - Geschwindigkeit KW - Entropie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210216-43663 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/pii/S0955598621000017 ; https://doi.org/10.1016/j.flowmeasinst.2021.101886 ER - TY - INPR A1 - Khosravi, Khabat A1 - Sheikh Khozani, Zohreh A1 - Mao, Luka T1 - A comparison between advanced hybrid machine learning algorithms and empirical equations applied to abutment scour depth prediction N2 - Complex vortex flow patterns around bridge piers, especially during floods, cause scour process that can result in the failure of foundations. Abutment scour is a complex three-dimensional phenomenon that is difficult to predict especially with traditional formulas obtained using empirical approaches such as regressions. This paper presents a test of a standalone Kstar model with five novel hybrid algorithm of bagging (BA-Kstar), dagging (DA-Kstar), random committee (RC-Kstar), random subspace (RS-Kstar), and weighted instance handler wrapper (WIHWKstar) to predict scour depth (ds) for clear water condition. The dataset consists of 99 scour depth data from flume experiments (Dey and Barbhuiya, 2005) using abutment shapes such as vertical, semicircular and 45◦ wing. Four dimensionless parameter of relative flow depth (h/l), excess abutment Froude number (Fe), relative sediment size (d50/l) and relative submergence (d50/h) were considered for the prediction of relative scour depth (ds/l). A portion of the dataset was used for the calibration (70%), and the remaining used for model validation. Pearson correlation coefficients helped deciding relevance of the input parameters combination and finally four different combinations of input parameters were used. The performance of the models was assessed visually and with quantitative metrics. Overall, the best input combination for vertical abutment shape is the combination of Fe, d50/l and h/l, while for semicircular and 45◦ wing the combination of the Fe and d50/l is the most effective input parameter combination. Our results show that incorporating Fe, d50/l and h/l lead to higher performance while involving d50/h reduced the models prediction power for vertical abutment shape and for semicircular and 45◦ wing involving h/l and d50/h lead to more error. The WIHW-Kstar provided the highest performance in scour depth prediction around vertical abutment shape while RC-Kstar model outperform of other models for scour depth prediction around semicircular and 45◦ wing. KW - maschinelles Lernen Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210311-43889 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/abs/pii/S0022169421001475?via%3Dihub ; https://doi.org/10.1016/j.jhydrol.2021.126100 ER -