TY - JOUR A1 - Kang, Shihchung A1 - Miranda, Eduardo T1 - Automated Simulation of the Erection Activities in Virtual Construction N2 - The goal of the research is the development of a computer system to plan, simulate and visualize erection processes in construction. In the research construction cranes are treated as robots with predefined degrees of freedom and crane-specific motion planning techniques are developed to generate time-optimized and collision-free paths for each piece to be erected in the project. Using inverse kinematics and structural dynamics simulation, the computer system then computes the crane motions and velocities necessary to achieve the previously calculated paths. The main benefits of the research are the accurate planning and scheduling of crane operations leading to optimization of crane usage and project schedules, as well as improving overall crane safety in the project. This research is aimed at the development of systems that will allow computer-assisted erection of civil infrastructure and ultimately to achieve fully-automated erection processes using robotic cranes... KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2310 ER - TY - JOUR A1 - Volkova, Viktorija T1 - The analysis of dynamic behaviour of pre-stressed systems under polyharmonic excitations N2 - Pre-stressed structural elements are widely used in large-span structures. As a rule, they have higher stiffness characteristics. Pre-stressed rods can be applied as girders of different purpose, and as their separate parts, e.g. rods of trusses and frames. Among numerous ways of prestressing the compression of girders, trusses, and frames by tightenings from high-strength materials is under common application. KW - Verkehrsplanung KW - Simulation KW - Baukonstruktion KW - Dynamische Belastung KW - Tragwerk / Vorspannung KW - Vorgespannte Konstruktion Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2656 ER - TY - JOUR A1 - Staub-French, Sheryl T1 - Feature-based Product Modeling for Building Construction N2 - Current building product models explicitly represent components, attributes of components, and relationships between components. These designer-focused product models, however, do not represent many of the design conditions that are important for construction, such as component similarity, uniformity, and penetrations. Current design and construction tools offer limited support for detecting these construction-specific design conditions. This paper describes the ontology we developed using the manufacturing concept of features to represent the design conditions that are important for construction. The feature ontology provides the blueprint for the additions and changes needed to transform a standard product model into a constructionspecific product model. The ontology formalizes three classes of features, defines the attributes and functions of each feature type, and represents the relationships between features explicitly. The descriptive semantics of the ontology allows practitioners to represent their varied preferences for naming features, specifying features that result from component intersections and the similarity of components, and grouping features that affect a specific construction domain. A software prototype that implements the ontology enables practitioners to transform designer-focused product models into feature-based product models that represent the construction perspective. KW - Produktmodell KW - Simulation KW - Bautechnik KW - Baukonstruktion KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2331 ER - TY - JOUR A1 - Kabath, Meik A1 - Stuyts, Patrick T1 - Building Design towards 5-dimensions N2 - There exists a big gap between the capabilities of current 3D-CAD applications and their actual usage in practice. Many architects and planners still prefer to draft in 2D because the benefits of 3D modeling are difficult to explain. This presentation offers a basis to view the 3D building model not merely as the source for 2D plan generation. By adding extra dimensions like Time and Cost to the 3D building model it becomes possible to generate dynamic information on building construction progress with regards to used material, resources and cost. These additional benefits are key elements to many planners and contractors and may therefore widen the acceptance of 3D building modeling in general. KW - Bauindustrie KW - Baukonstruktion KW - Bauwerksplanung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2712 ER - TY - THES A1 - Bayer, Veit T1 - Zur Zuverlässigkeitsbeurteilung von Baukonstruktionen unter dynamischen Einwirkungen T1 - On the reliability assessment of building structures subjected to dynamic excitation N2 - Die Arbeit befaßt sich mit varianzmindernden Verfahren zur Monte Carlo Simulation von stochastischen Prozessen, zum Zweck der Zuverlässigkeitsbeurteilung von Baukonstruktionen mit nichtlinearem Systemverhalten. Kap. 2 ist eine Literaturstudie zu varianzmindernden Monte Carlo Methoden. In Kap. 3 wird die Spektrale Darstellung eines stationären, skalaren Gauß - Prozesses hergeleitet. Auf dieser Grundlage werden verschiedene Simulationsmodelle diskutiert. Das in Kap. 4 entwickelte varianzmindernde Simulationsverfahren basiert auf der Spektralen Darstellung. Nach einer ersten Pilotsimulation werden die Frequenzen für die Einführung zufälliger Amplituden bestimmt und deren Parameter angepaßt. Der zweite Lauf erfolgt mit diesen Parametern nach dem Prinzip des Importance Sampling. Das Verfahren wird in Kap. 5 für eine Brücke unter Erdbebenbelastung angewendet. Die Brücke ist mit sog. Hysteretic Devices zur Energiedissipation ausgerüstet. Es werden einerseits die Genauigkeit und Effizienz des Simulationsverfahrens, andererseits die Leistungsfähigkeit der Hysteretic Devices zur Erdbebenertüchtigung von Bauwerken demonstriert. N2 - Main topic is the development of variance–reducing Monte Carlo methods, for the purpose of reliability analyses of engineering structures with nonlinear behaviour. Ch. 2 is a literature survey on variance-reducing Monte Carlo methods. The Spectral Representation of a scalar, stationary Gaussian process is derived in ch. 3. On this basis, two popular simulation methods are discussed. The variance-reducing simulation concept developed in ch. 4 is based on the Spectral Representation. After a first pilot simulation, the frequencies are selected for introduction of amplitudes as random variables. In addition, the parameters of the amplitudes are adapted. This is the basis for the second simulation following the Importance Sampling principle. This simulation concept is utilized for reliability analysis of a bridge subjected to earthquake excitation in ch. 5. The bridge is equipped with Hysteretic Devices for dissipation of energy. The example demonstrates, on one hand, the accuracy and efficiency of the developed simulation method. On the other hand, the effectiveness of Hysteretic Devices for earthquake protection of building structures becomes evident. KW - Baukonstruktion KW - Dynamische Belastung KW - Zuverlässigkeit KW - Sicherheitstheorie KW - Erdbeben KW - Probabilistik KW - Brücke KW - Monte-Carlo Simulation KW - reliability assessment KW - earthquake KW - probabilistics KW - bridge KW - Monte Carlo simulation Y1 - 1999 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040205-215 ER -