TY - CHAP ED - Alfen, Hans Wilhelm ED - Anke, Schwanck T1 - Flächenmanagement in Hochschulen. Workshop zu Handlungsansätzen hochschulinterner Flächensteuerung N2 - Die Publikation dokumentiert die Beiträge des Workshops „Flächenmanagement in Hochschulen“ der Bauhaus-Universität Weimar, Professur Betriebswirtschaftslehre im Bauwesen, vom 19.11.2012. Insbesondere für Akteure aus Lehre, Forschung, Hochschulverwaltung, Bau- und Liegenschaftsverwaltungen sowie Politik bieten die wiedergegebenen Vorträge theoretische und praktische Anregungen für das Vorgehen bei der Steuerung hochschulinterner Flächen. Dokumentiert werden unterschiedliche Modi zur Steuerung der Flächenressourcen. Ziel ist es dabei, die liegenschaftspolitischen Rahmenbedingungen aufzuzeigen, von denen das Flächenmanagement abhängig ist. Mit der Auswertung einer deutschlandweiten Hochschulbefragung zum Flächenmanagement wird der Status quo hochschulinterner Flächensteuerung nachgezeichnet. Es wird zuerst ein Überblick gegeben, welche Ansätze zur Optimierung der Flächen-steuerung von Hochschulen möglich sind. Hochschulvertreter von zwei staatlichen und einer privaten Hochschule stellten praktizierte Handlungsansätze für einen ressourcenschonenden Umgang mit Flächen vor und arbeiteten die aus ihrer Sicht Erfolg versprechenden Steuerungsaspekte heraus. Zusätzliche Diskussionsimpulse für die Flächensteuerung an Hochschulen bieten die Dokumentationen von Praxisbeispielen aus anderen Bereichen. Es werden das Vorgehen bei der Flächensteuerung eines Chemie- und Pharmakonzerns mit umfangreichen eigenen Forschungsaktivitäten sowie Flächenoptimierungsmaßnahmen bei Büroflächen der öffentlichen Verwaltung vorgestellt. T3 - Schriftenreihe der Professur Betriebswirtschaftslehre im Bauwesen - 18 KW - Hochschule , Fläche , Steuerung , Allokation , Hochschulorganisation , Optimierung , Management KW - Flächenmanagement, Flächensteuerung, Flächenoptimierung, Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130819-20071 SN - 978-3-86068-503-7 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - CHAP A1 - Hollermann, Sebastian A1 - Melzner, Jürgen ED - Hollermann, Sebastian ED - Melzner, Jürgen T1 - 24. Assistententreffen der Bereiche Bauwirtschaft, Baubetrieb und Bauverfahrenstechnik N2 - Tagungsband - 24. Assistententreffen der Bereiche Bauwirtschaft, Baubetrieb und Bauverfahrenstechnik 10.-12.Juli 2013 Weimar T3 - Schriften der Professur Baubetrieb und Bauverfahren - 26 KW - Baubetrieb KW - Bauwirtschaft KW - Bauverfahren Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130523-19371 CY - Weimar ER - TY - CHAP ED - Abrahamczyk, Lars ED - Schwarz, Jochen ED - Werner, Frank T1 - Model Validation and Simulation N2 - The Bauhaus Summer School series provides an international forum for an exchange of methods and skills related to the interaction between different disciplines of modern engineering science. The 2012 civil engineering course was held in August over two weeks at Bauhaus-Universität Weimar. The overall aim was the exchange of research and modern scientific approaches in the field of model validation and simulation between well-known experts acting as lecturers and active students. Besides these educational intentions the social and cultural component of the meeting has been in the focus. 48 graduate and doctoral students from 20 different countries and 22 lecturers from 12 countries attended this summer school. Among other aspects, this activity can be considered successful as it raised the sensitivity towards both the significance of research in civil engineering and the role of intercultural exchange. This volume summarizes and publishes some of the results: abstracts of key note papers presented by the experts and selected student research works. The overview reflects the quality of this summer school. Furthermore the individual contributions confirm that for active students this event has been a research forum and a special opportunity to learn from the experiences of the researchers in terms of methodology and strategies for research implementation in their current work. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 23 KW - Modeling KW - Validation KW - Simulation KW - Summer School Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130805-19969 SN - 978-3-86068-502-0 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - CHAP ED - Hildebrand, Jörg T1 - SYSWELD Forum 2011 N2 - Am 25. und 26. Oktober 2011 trafen sich an der Bauhaus-Universität Weimar 70 nationale und internationale Fachleute aus Forschung und Praxis, um sich im Rahmen des vierten SYSWELD Forums über aktuelle Entwicklungen der numerischen Simulation auf dem Gebiet der Wärmebehandlung und des Schweißens auszutauschen. Die numerische Simulation im Bereich des Schweißens und der Wärmebehandlung hat sich in den letzten Jahren beachtlich weiterentwickelt und bietet ein zukunftsweisendes und innovatives Arbeitsfeld für Ingenieure. KW - Schweißen KW - Computersimulation KW - Wärmebehandlung KW - Gefügeumwandlung KW - Metall KW - Verzug KW - ZTU-Schaubild KW - Eigenspannung KW - Temperaturfeld KW - simulation KW - residual stress KW - temperature KW - transformation KW - welding KW - heat treatment Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111213-15694 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim A1 - Ailland, Karin T1 - CONVR 2011 : Proceedings of the 11th International Conference on Construction Applications of Virtual Reality N2 - Proceedings of the 11th International Conference on Construction Applications of Virtual Reality T3 - Schriften der Professur Baubetrieb und Bauverfahren - 21 KW - Plant Simulation KW - Simulation KW - Virtuelle Realität KW - Visualisierung KW - Informationssystem KW - Design visualization KW - Construction visualization KW - Building information modelling KW - Simulation in construction KW - Virtual reality Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111102-15603 SN - 978-3-86068-458-0 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Tag des Baubetriebs 2010 - Tagungsbeiträge "Modellierung von Prozessen zur Fertigung von Unikaten" : Forschungsworkshop zur Simulation von Bauprozessen N2 - Am 25. März 2010 veranstaltete die Professur Baubetrieb und Bauverfahren im Rahmen der jährlich stattfindenden baubetrieblichen Tagungsreihe gemeinsam mit der Arbeitsgruppe „Unikatprozesse“ in der Fachgruppe „Simulation in Produktion und Logistik“ (SPL) im Rahmen der Arbeitsgemeinschaft Simulation – ASIM einen ganztägigen Workshop mit dem Titel: „Modellierung von Prozessen zur Fertigung von Unikaten“. Viele Bauprozesse sind dadurch gekennzeichnet, dass sie Unikatcharakter besitzen. Unikate sind durch prototypische Einmaligkeit, Individualität, vielfältige Randbedingungen, einen geringen Grad an Standardisierung und Wiederholungen gekennzeichnet. Das erschwert die realitätsnahe Modellierung zur Simulation sogenannter Unikatprozesse. Dieser Besonderheit widmet sich die überwiegende Zahl der Tagungsbeiträge, die in diesem Band widergegeben sind. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 19 KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Bauplanung KW - Bauprozess KW - Computersimulation Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100628-15065 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Tag des Baubetriebs 2008 - Tagungsbeiträge "Auf dem Weg zum digitalen (Bau-)haus-Bau : Forschungsworkshop zur Simulation von Bauprozessen N2 - Am 31. März 2008 veranstalteten die Professur Baubetrieb und Bauverfahren und die Juniorprofessur Theoretische Methoden des Projektmanagements der Bauhaus-Universität Weimar einen ganztägigen Workshop mit dem Titel: „Auf dem Weg zum digitalen (Bau-)haus-Bau“. Damit sollte die im Herbst 2007 an der Universität Kassel unter dem Titel „Simulation in der Bauwirtschaft“ begonnene Reihe von Workshops eine Fortsetzung finden. Der Schwerpunkt wurde dieses Mal auf die Simulation von Bauprozessen gesetzt – Simulation mit dem Ziel, Arbeitsvorbereitung, Bauausführung und Baustellencontrolling digital zu unterstützen. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 17 KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Bauplanung KW - Bauprozess Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081117-14457 ER - TY - CHAP A1 - Geyer, Annett T1 - Können wir uns schlechte Arbeitsbedingungen leisten? KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8397 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Absolventen für die Arbeitswelt von morgen KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8374 ER - TY - CHAP A1 - Steinberg, Kerstin T1 - Neue Strukturen für die Anforderungen von morgen - der Thüringer Landesbetrieb im Spannungsfeld zwischen Deregulierung und Verantwortung KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8384 ER - TY - CHAP A1 - Seifert, Wolfgang T1 - Systematischer Arbeitsschutz im Baubetrieb - AMS Bau KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8409 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Impulse für eine neue Qualität des Bauens - Initiative INQA Bauen KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8415 ER - TY - CHAP A1 - Klingsporn, Karin T1 - Gesundheitsfürsorge im Unternehmen - Betriebliche Gesundheitsförderung KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8427 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Nachruf für Prof. Dr. Karl-Dieter Röbenack KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8447 ER - TY - CHAP A1 - Steinmetzger, Rolf T1 - Prävention durch menschengerechte Arbeitsgestaltung KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8438 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim A1 - Steinmetzger, Rolf A1 - Illert, Stephan A1 - Steinberg, Kerstin A1 - Geyer, Annett A1 - Seifert, Wolfgang A1 - Schul, Sebastian A1 - Klingsporn, Karin T1 - 5. Fachtagung "Sicherheit auf Baustellen": Aus Unfällen und Berufskrankheiten lernen – gesund arbeiten bis zur Rente N2 - Die aktuelle demografische Entwicklung bedingt offensichtlich auch Arbeiten in rauer Umgebung bis zur Rente mit 67, auch auf dem Bau. Das Thema liegt scheinbar nur am Rande des Baubetriebswesens. Doch obwohl es sozialpolitisch determiniert ist, hat es sehr konkret mit Gesundheitsschutz, Arbeitsschutz und Arbeitsgestaltung zu tun. Die fünfte Fachtagung 'Sicherheit auf Baustellen' stellt sich der Diskussion, wie das Rentenalter gesund erreichbar ist, was alle am Arbeitsschutz Beteiligten schon heute und auch in Zukunft dafür tun können, und hinterfragt kritisch, wie realistisch diese pauschale Forderung nach Arbeit bis 67 ist. Forderungen nach schlankeren Strukturen im Staat und das Streben nach Deregulierung haben auch zu Veränderungen in der Arbeitsschutzverwaltung des Freistaates Thüringen geführt, über die das Forum informiert. KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8055 ER - TY - CHAP A1 - Steinmetzger, Rolf T1 - 5. Fachtagung Sicherheit auf Baustellen - Inhaltsverzeichnis KW - Bevölkerungsentwicklung KW - Gesundheitsschutz KW - Arbeitsschutz KW - Arbeitsgestaltung KW - Arbeitswissenschaft KW - Humanisierung der Arbeit Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8362 ER - TY - CHAP A1 - Bauch, Ullrich T1 - Transparenz im Änderungsmanagement - ein Vorteil für alle Vertragspartner? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8460 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - Tag des Baubetriebs 2006 - Tagungsbeiträge "Nachtragsmanagement in Praxis und Forschung" N2 - Die Fachtagung richtete sich an Geschäftsführer, Projektleiter, Bauleiter und Projektsteuerer in Planung und Ausführung mit Beiträgen zum Nachtrags- und Änderungsmanagement am Bau, Workflow-Management in der Baupraxis, Integration von Informationsprozessen auf der Basis von Nemetschek Technologien sowie Kompetenzaufbau durch gezielte Weiterbildung. KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7498 ER - TY - CHAP A1 - Köppel, Bernd T1 - Nachtragsjägerei und Akquisition, eine unmögliche Symbiose? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8459 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - Der Bauvertrag sagt dazu leider nichts! - Was tun? KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8498 ER - TY - CHAP A1 - König, Markus T1 - Workflow-Management in der Baupraxis KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8500 ER - TY - CHAP A1 - Eschenbruch, Klaus T1 - Änderungsmanagementsysteme bei komplexen Projekten - Paradigmenwechsel beim Claimmanagement KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8470 ER - TY - CHAP A1 - Wolff, Ulrich T1 - Die richtige Weiterbildung für den systematischen Kompetenzaufbau KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Baubetriebslehre KW - Nachtragsvereinbarung KW - Prozessmanagement Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-8480 ER - TY - CHAP A1 - Otto, Wilfried T1 - Erfahrungen eines SiGeKo bei der Ausführung des Bauvorhabens „ICE-Knoten Erfurt“ N2 - Am Beispiel des ICE-Knotens Erfurt werden positive Erfahrungen bei der Umsetzung der Baustellenverordnung berichtet. Die Erfahrungen haben gezeigt, dass konkrete Vorgaben und das Festlegen und Fordern bestimmter Sicherheitsvorkehrungen die Sicherheit auf der Baustelle wesentlich mitbestimmen. Ein wichtiges Hilfsmittel dazu ist ein konkreter SiGe-Plan, dessen Realisierung durch permanente Sicherheitsbegehungen kontrolliert werden muss. Durch eine zielgerichtete Einflussnahme und sachgemäße Arbeitsweise der Fachfirmen wurden die Bauabläufe realisiert, ohne dass es zu schweren Unfällen und Störungen insbesondere im Bahnverkehr kam. Die Baustellenverordnung mit ihren Forderungen war dabei ein wichtiges Instrumentarium, welches durch die DB AG vollinhaltlich umgesetzt wurde. KW - Arbeitsschutz KW - Baustelle KW - Baubetriebslehre KW - Deutschland / Baustellenverordnung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6979 ER - TY - CHAP A1 - Bargstädt, Hans-Joachim T1 - In welchem Lebensjahr beginnt der aktive Arbeitsschutz? N2 - Dieser Beitrag versucht, einige Aspekte der individuellen Lebensentwicklung mit den Möglichkeiten wirksamen Arbeitsschutzes zu verknüpfen. Er wirt damit die Frage auf, ob und wie die Sensibilisierung für Sicherheit und Gesundheitsschutz, für vorbeugende Maßnahmen und für die Akzeptanz bei den Betroffenen verbessert werden kann. Was hat Arbeitsschutz mit dem Lebensalter zu tun? Verhalten sich Routiniers im Bauwesen anders als Berufanfänger? KW - Arbeitsschutz KW - Baubetriebslehre Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6477 ER - TY - CHAP A1 - Rauscher, Sigrun T1 - Gefahrstoffmanagement im Unternehmen – Hilfen für Bestandsaufnahme, Lagerung und Entsorgung N2 - Am Beispiel eines im Rahmen der Neugestaltung von Tätigkeiten mit Gefahrstoffen an der Bauhaus-Universität Weimar bearbeiteten Projektes werden Grundzüge und Schwerpunkte für ein mögliches Gefahrstoff-Management-System erläutert. KW - Arbeitsschutz KW - Gefahrstoff KW - Deutschland / Gefahrstoffverordnung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6954 ER - TY - CHAP A1 - Schappmann, Ulf-J. T1 - Lehren aus der Praxis für die Praxis – Probleme der Baustellensicherheit aus der Sicht des SiGeKo N2 - Ursachen für Probleme der Baustellensicherheit und Wege zu deren Verbesserung; Anforderungen an Sicherheit im Baubereich. Beispiele. Die Baupraxis braucht Hilfestellungen, sowohl im Planungsbereich als auch im Ausführungsbereich. Einige Möglichkeiten werden im Beitrag genannt. KW - Arbeitsschutz KW - Baustelle KW - Baubetriebslehre KW - Deutschland / Baustellenverordnung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6967 ER - TY - CHAP A1 - Steinmetzger, Rolf T1 - Alle Jahre wieder: Hitzearbeit im Freien N2 - Der Verfasser betrachtet die Einflüsse sommerlicher Belastungen auf Bauarbeiter durch direkte Sonneneinstrahlung, Hitze und Ozon, die bisher zu wenig Beachtung finden. KW - Arbeitsschutz KW - Baustelle KW - Hitzebelastung KW - Arbeitsstättenverordnung KW - Baustelleneinrichtung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6917 ER - TY - CHAP A1 - Kath, Thilo T1 - Sicher arbeiten mit Kränen durch Simulation und Visualisierung N2 - Bestimmungen und Anforderungen an den Entwurf von Baustelleneinrichtungen (BE), Kraneinsatzplan als Bestandteil der BE, planungstechnische Aspekte, Untersuchung von CAD-Anwendungen für die Planung von Baustelleneinrichtungen, Entwicklung eines Kraneinsatzplaners, Sicherheitsaspekte bei der Planung von Baukraneinsätzen. Es zeigte sich, dass gerade die Forderung der Betrachtung kausaler und räumlicher Abhängigkeiten mit den in der Praxis angewandten Planungswerkzeugen nicht oder nur eingeschränkt realisierbar ist. Mit dem Programm >EasyCrane TK< wird eine Möglichkeit aufgezeigt, die Erstellung von Kraneinsatzplänen effizienter und für die Umsetzung auf der Baustelle sicherer zu gestalten. KW - Arbeitsschutz KW - Baustelle KW - Baubetriebslehre KW - Simulation KW - Visualisierung KW - Kran KW - Arbeitsstättenverordnung KW - Baustelleneinrichtung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6901 ER - TY - CHAP A1 - Weinrich, Wolfgang T1 - Eine schlanke Arbeitsstättenverordnung N2 - Es wird die neue Arbeitsstättenverordnung erläutert: Anliegen der Novellierung, Bezug zum Arbeitsschutzgesetz, Aufbau der ArbStättV, wesentliche Inhalte, Interpretationshilfen, Bezug zur Thüringer Bauordnung, Konsequenzen für den Baubetrieb KW - Arbeitsschutz KW - Baustelle KW - Baubetriebslehre KW - Arbeitsstättenverordnung KW - Baustelleneinrichtung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6892 ER - TY - CHAP A1 - Kiewitt, Walter T1 - Die neue Gefahrstoffverordnung – neue Regelungen auch für Baustellen? N2 - Was bringt die >Gefahrstoffverordnung 2004< Neues? Grundmaßnahmen bei Tätigkeiten mit Gefahrstoffen (Schutzstufen) KW - Arbeitsschutz KW - Baustelle KW - Gefahrstoff Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6925 ER - TY - CHAP A1 - Riehm, Gerald T1 - Quo vadis Arbeitsschutz? N2 - In seinem Einführungsvortrag zur Fachtagung gibt Herr Riehm einen Überblick über den aktuellen Stand des Arbeitsschutzes auf thüringer Baustellen. Außerdem wird ein Ausblick auf die Entwicklung des Arbeitsschutzrechts in Deutschland und der staatlichen Arbeitsschutzbehörden gegeben. KW - Arbeitsschutz KW - Baustelle Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6873 ER - TY - CHAP A1 - Peter, Lutz T1 - Abbruch und Rückbau von Plattenbauten aus der Sicht des Gefahrstoffschutzes N2 - Speziell für die Sandwich-Platten der Außenfassade von DDR-Plattenbauten, die in ihrem Inneren in den meisten Fällen Mineralwolle (Handelsname: Kamilit) enthalten, wurden belastungsarme Abbruch- bzw. Rückbautechnologien untersucht und durch Gefahrstoffmessungen begleitet. Es werden Vorschläge für zukünftig zu bevorzugende Abbruchtechnologien unterbreitet. KW - Arbeitsschutz KW - Baustelle KW - Gefahrstoff KW - Stadtsanierung KW - Abbruch Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6948 ER - TY - CHAP ED - Professur Baubetrieb und Bauverfahren, T1 - 4. Fachtagung "Sicherheit auf Baustellen" : Erfahrung - Arbeitsscherheit - Leistung N2 - Beiträge zur 4. Fachtagung „Sicherheit auf Baustellen“ am Dienstag, dem 22. März 2005 in Weimar an der Fakultät Bauingenieurwesen, Professur Baubetrieb und Bauverfahren der Bauhaus-Universität Weimar. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 08 KW - Weimar / Bauhaus-Universität / Professur Baubetrieb und Bauverfahren KW - Arbeitssicherheit KW - Arbeitsschutz KW - Baustelle KW - Gefahrstoff Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20081126-14528 ER - TY - CHAP A1 - Henke, Torsten T1 - Schadstoffproblematik beim Umbau der Anna-Amalia-Bibliothek Weimar N2 - Sieben Bestandsbauten der Herzogin-Anna-Amalia-Bibliothek Weimar sollten umgenutzt und durch zwei oberirdische und drei unterirdische Neubauten ergänzt werden. Im Beitrag näher beschrieben: Schadstofferkundung und Beurteilung der Gefahren der Baumaßnahmen, Sicherheitsmaßnahmen, Durchführung von Reinigungsarbeiten KW - Arbeitsschutz KW - Baustelle KW - Gefahrstoff KW - Stadtsanierung Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-6935 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Borrmann, André A1 - Hübler, Reinhard T1 - Integration of Constraints into Digital Building Models for Cooperative Planning Processes N2 - The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given. KW - Architektur KW - Verteiltes System KW - Constraint KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1775 ER - TY - CHAP A1 - Soibelman, Lucio A1 - O'Brien, William A1 - Elvin, George T1 - Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design N2 - The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1948 ER - TY - CHAP A1 - Keller, Martin A1 - Antoniadis, George A1 - Menzel, Karsten T1 - Resource Management for the Construction Industry N2 - The management of resources is an essential task in each construction company. Today, ERP systems and e-Business systems are available to assist construction companies to efficiently organise the allocation of their personnel and equipment within the company, but they cannot provide the company with the idle resources for every single task that has to be performed during a construction project. Therefore, companies should have an alternative solution to better exploit expensive resources and compensate their fixed costs, but also have them available at the right time for their own business activities. This paper outlines the approach taken by the EU funded project “e-Sharing” (IST-2001-33325) to support resource management between construction companies. It will describe requirements for the management of construction resources, its core features, and the integration approach. Therefore, we will outline the approach of an integrated resource type model supporting the management and classification of construction equipment, construction tasks and qualification profiles. The development is based on a cross-domain analysis and evaluation of existing models. ... KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Betriebsmittel Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1679 ER - TY - CHAP A1 - Menzel, Karsten A1 - Dittrich, Jörg A1 - Domschke, Sven T1 - About the implantation process of mobile computing in AEC N2 - The AEC industry is conscious of the potentials arising from the usage of mobile computer systems to increase productivity by streamlining their business processes. Discussions are no longer on whether or not to use a mobile computer solution, but rather, on how it should be used. However, the implantation process of this new technology in Architecture, Engineering and Construction (AEC) and Facility Management (FM) practise is very slow and should be improved. One way to encourage and ease the usage of mobile computer systems in AEC is a more process-oriented usability and context appropriateness of mobile computer solutions. Context-sensitivity is defined as a crucial feature to be taken into account for further research in the area of Mobile Computing. Context-sensitive, mobile IT-solutions depend on two features: (1) flexible definitions of (construction) processes describing the context and (2) tools for flexible, multi-dimensional information management representing the context. It is on this premise that the authors propose the n-dimensional data management approach for the implementation of mobile computing solutions. In this paper, we analyse working scenarios in the AEC and FM sector, defining context aspects which are transformed and formalized as dimension hierarchies of the envisaged context model. KW - Mobile Computing KW - Funknetz KW - Bauwesen Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1106 ER - TY - CHAP A1 - Gordon, Chris A1 - Akinci, Burcu A1 - Garrett, James H. T1 - An Approach for Planning Sensor-Based Inspection of the Built Environment N2 - The promise of lower costs for sensors that can be used for construction inspection means that inspectors will continue to have new choices to consider in creating inspection plans. However, these emerging inspection methods can require different activities, resources, and decisions such that it can be difficult to compare the emerging methods with other methods that satisfy the same inspection needs. Furthermore, the context in which inspection is performed can significantly influence how well certain inspection methods are suited for a given set of goals for inspection. Context information, such as weather, security, and the regulatory environment, can be used to understand what information about a component should be collected and how an inspection should be performed. The research described in this paper is aimed at developing an approach for comparing and selecting inspection plans. This approach consists of (1) refinement of given goals for inspection, if necessary, in order to address any additional information needs due to a given context and in order to reach a level of detail that can be addressed by an inspection activity; (2) development of constraints to describe how an inspection should be achieved; (3) matching of goals to available inspection methods, and generation of activities and resource plans in order to address the goals; and (4) selection of an inspection plan from among the possible plans that have been identified. The authors illustrate this approach with observations made at a local construction site. KW - Monitorüberwachung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1500 ER - TY - CHAP A1 - van Rooyen, G.C. A1 - Olivier, A. H. T1 - Notes on structural analysis in a distributed collaboratory N2 - The worldwide growth of communication networks and associated technologies provide the basic infrastructure for new ways of executing the engineering process. Collaboration amongst team members seperated in time and location is of particular importance. Two broad themes can be recognized in research pertaining to distributed collaboration. One theme focusses on the technical and technological aspects of distributed work, while the other emphasises human aspects thereof. The case of finite element structural analysis in a distributed collaboratory is examined in this paper. An approach is taken which has its roots in human aspects of the structural analysis task. Based on experience of how structural engineers currently approach and execute this task while utilising standard software designed for use on local workstations only, criteria are stated for a software architechture that could support collaborative structural analysis. Aspects of a pilot application and the results of qualitative performance measurements are discussed. KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Finite-Elemente-Methode Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1451 ER - TY - CHAP A1 - Cheng, Jinxing A1 - Lau, Gloria A1 - Law, Kincho T1 - A simulation access language and framework for project management applications N2 - As computer programs become ever more complex, software development has shifted from focusing on programming towards focusing on integration. This paper describes a simulation access language (SimAL) that can be used to access and compose software applications over the Internet. Specifically, the framework is developed for the integration of tools for project management applications. The infrastructure allows users to specify and to use existing heterogeneous tools (e.g., Microsoft Project, Microsoft Excel, Primavera Project Planner, and AutoCAD) for simulation of project scenarios. This paper describes the components of the SimAL language and the implementation efforts required in the development of the SimAL framework. An illustration example bringing on-line weather forecasting service for project scheduling and management applications is provided to demonstrate the use of the simulation language and the infrastructure framework. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1567 ER - TY - CHAP A1 - Jianping, Zhang A1 - Tianyi, Ma A1 - Qiping, Shen T1 - Application of Data Warehouse and Data Mining in Construction Management N2 - All construction project are constrained by their schedules, budgets and specifications, and safety and environmental regulations. These constraints made construction management more complex and difficult. At the same time, many historical data that can support the decisions in the future are kept in construction enterprises,. To use the historical data effectively and efficiently, it is essential to apply the data warehouse and data mining technologies. This paper introduces a research which aims to develop a data warehouse system according to the requirements of construction enterprises and use data mining technology to learn useful information and knowledge from the data warehouse system. The design, the development and the application of this system are detailedly introduced in this paper. KW - Bauwerk KW - Datenmanagement KW - Data-Warehouse-Konzept Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1247 ER - TY - CHAP A1 - König, Markus A1 - Klinger, Axel A1 - Berkhahn, Volker T1 - Structural Correctness of Planning Processes in Building Engineering N2 - The planning of projects in building engineering is a complex process which is characterized by a dynamical composition and many modifications during the definition and execution time of processes. For a computer-aided and network-based cooperation a formal description of the planning process is necessary. In the research project “Relational Process Modelling in Cooperative Building Planning” a process model is described by three parts: an organizational structure with participants, a building structure with states and a process structure with activities. This research project is part of the priority program 1103 “Network-Based Cooperative Planning Processes in Structural Engineering” promoted by the German Research Foundation (DFG). Planning processes in civil engineering can be described by workflow graphs. The process structure describes the logical planning process and can be formally defined by a bipartite graph. This structure consists of activities, transitions and relationships between activities and transitions. In order to minimize errors at execution time of a planning process a consistent and structurally correct process model must be guaranteed. This contribution considers the concept and the algorithms for checking the consistency and the correctness of the process structure. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Planungsprozess KW - Konsistenz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1690 ER - TY - CHAP A1 - Suzuki, Aketo T1 - Numerical Analysis for Prediction as to Influence of Digging a Tunnel on Groundwater N2 - This paper describes monitoring of the in-valley discharge and underground water level at the place where the tunnel will be constructed and also, the numerical analysis for prediction applying the Tank Model and Linear Filter Method to calculate the prediction. The application of these analyses has actually allowed the change of underground water level to be grasped and more effective information system to be established by comparing the real-time monitoring data with the real-time calculation of prediction. KW - Mobile Computing KW - Funknetz KW - Tunnelbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1133 ER - TY - CHAP A1 - Xie, Haiyan A1 - Issa, Raja A1 - O'Brien, William T1 - Structure of a Formal User Model for Construction Information Retrieval N2 - Information science researchers and developers have spent many years addressing the problem of retrieving the exact information needed and using it for analysis purposes. In informationseeking dialogues, the user, i.e. construction project manager or supplier, often asks questions about specific aspects of the tasks they want to perform. But most of the time it is difficult for the software systems to unambiguously understand their overall intentions. The existence of information tunnels (Tannenbaum 2002) aggravates this phenomenon. This study includes a detailed case study of the material management process in the construction industry. Based on this case study, the structure of a formal user model for information retrieval in construction management is proposed. This prototype user model will be incorporated into the system design for construction information management and retrieval. This information retrieval system is a user-centered product based on the development of a user configurable visitor mechanism for managing and retrieving project information without worrying too much about the underlying data structure of the database system. An executable UML model combined with OODB is used to reduce the ambiguity in the user's intentions and to achieve user satisfaction. KW - Bauwerk KW - Datenmanagement KW - Benutzeroberfläche Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1296 ER - TY - CHAP A1 - Miles, John A1 - Cen, Mei A1 - Taylor, Mark T1 - Linking Sketching and Constraint Checking for Early Conceptual Design N2 - At the start of the conceptual design process, designers start to give tangible form to their thoughts by sketching. This helps with reasoning and communicates ideas to other members of the team. Sketches are gradually worked up into more formal drawings which are then passed to the other stages of the design process. There are however some problems with basing early ideas on sketching. For example, due to their ad-hoc nature, sketches tend only to be diagrammatic representations and so designers cannot be sure that their ideas are feasible and what is being proposed meets the constraints described in the client brief. This can result in designers wasting time working up ideas which prove to be unsuitable. Also the process of constraint checking is complex and time consuming and so designers tend limit their search of possible options and instead choose satisfying rather than good solutions. This paper describes the INTEGRA project which examines the role of sketching in early conceptual design and how this can be linked to other aspects of the process and particularly automated constraint checking using an IT based approach. The focus for the work is the design of framed buildings. A multi-disciplinary approach has been adopted and the work has been undertaken in close collaboration with practising designers and clients. KW - Konzipieren KW - Bauwerk KW - Management KW - Constraintnetz Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1547 ER - TY - CHAP A1 - Miles, John A1 - Joita, Liviu A1 - Burnap, Peter T1 - Collaborative Engineering: Virtual Teams in a Grid Environment Supporting Consortia in the Construction Industry N2 - In the AEC (Architecture / Engineering / Construction) industry a number of individuals and organisations collaborate and work jointly on a construction project. The resulting consortium has large pool of expertise and experience and can be defined as a Virtual Organisation (VO) formed for the duration of the project. VOs are electronically networked organisations where IT and web based communication technology play an important role in coordinating various activities of these organisations. This paper describes the design, development and implementation of a Grid enabled application called the Product Supplier Catalogue Database (PSCD) which supports collaborative working in consortia. As part of the Grid-enabling process, specialised metadata is being developed to enable PSCD to effectively utilise Grid middleware such as Globus and Java CoG toolkits. We also describe our experience whilst designing, developing and deploying the security service of the application using the Globus Security Interface (GSI). KW - Ingenieurbau KW - Verteiltes System KW - Planungsprozess KW - Modellierung KW - Projektmanagement Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1362 ER - TY - CHAP A1 - Palm, Johan T1 - Integrated Engineering Workflow focused on the Structural Engineering in the Industrial Environment N2 - The engineering and construction industry has been slow to exploit the full potential of information technology. The industry is highly fragmented, price sensitive, risk-adverse, and profit margins are small. Each project is unique with a small amount of technological innovation opportunities to capitalise on from one project to the next. Technological innovations that have been taking place are just simulating the old traditional paper workflow. Engineering information in digital form is being conveyed using traditional paper representations, which have to be interpreted by humans before the information can be used in other applications, thereby creating ‘islands of information’. It can be seen that poorly implemented IT strategies are duplicating paperwork, rather than reducing or eliminating it (Crowley et al., 2000). This paper will introduce the Integrated Engineering Workflow (IEW) concept to re-organise a structural discipline working on multi-disciplinary projects so as to maximise the advantages offered by new information technology. KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Prozessmanagement KW - Ingenieurbau Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1625 ER -