TY - JOUR A1 - Artus, Mathias A1 - Koch, Christian T1 - State of the art in damage information modeling for RC bridges – A literature review JF - Advanced Engineering Informatics N2 - In Germany, bridges have an average age of 40 years. A bridge consumes between 0.4% and 2% of its construction cost per year over its entire life cycle. This means that up to 80% of the construction cost are additionally needed for operation, inspection, maintenance, and destruction. Current practices rely either on paperbased inspections or on abstract specialist software. Every application in the inspection and maintenance sector uses its own data model for structures, inspections, defects, and maintenance. Due to this, data and properties have to be transferred manually, otherwise a converter is necessary for every data exchange between two applications. To overcome this issue, an adequate model standard for inspections, damage, and maintenance is necessary. Modern 3D models may serve as a single source of truth, which has been suggested in the Building Information Modeling (BIM) concept. Further, these models offer a clear visualization of the built infrastructure, and improve not only the planning and construction phases, but also the operation phase of construction projects. BIM is established mostly in the Architecture, Engineering, and Construction (AEC) sector to plan and construct new buildings. Currently, BIM does not cover the whole life cycle of a building, especially not inspection and maintenance. Creating damage models needs the building model first, because a defect is dependent on the building component, its properties and material. Hence, a building information model is necessary to obtain meaningful conclusions from damage information. This paper analyzes the requirements, which arise from practice, and the research that has been done in modeling damage and related information for bridges. With a look at damage categories and use cases related to inspection and maintenance, scientific literature is discussed and synthesized. Finally, research gaps and needs are identified and discussed. KW - Building Information Modeling KW - Brücke KW - Inspektion KW - Literaturrecherche KW - Datenmodell Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220506-46390 UR - https://www.sciencedirect.com/science/article/abs/pii/S1474034620301427?via%3Dihub VL - 2020 IS - volume 46, article 101171 SP - 1 EP - 16 PB - Elsevier Science CY - Amsterdam ER - TY - THES A1 - Rahn, Andre T1 - "Monitoring an Brückenkappen mit Tellerankern" T1 - Monitoring at bridge caps with plate anchors N2 - Brückenkappen gewährleisten die Trennung der Verkehrsräume Fahrbahn und Gehweg und müssen aufgrund ihrer Anordnung im Querschnitt Schutz- und Leiteinrichtungen aufnehmen. Zur Verankerung der Brückenkappen am Überbau werden je nach Erfordernissen Anschlussbewehrung und / oder Telleranker angeordnet. Die vorliegende Arbeit analysiert grundlegende Möglichkeiten zur messtechnischen Untersuchung von Brückenkappen bei Anwendung von Tellerankern. Dabei werden die theoretische und konstruktiven Grundlagen der Kappenausbildung betrachtet. Außerdem werden die Zusammenhänge zwischen den auftretenden Einwirkungen und deren Auswirkungen auf Brückenkappen betrachtet. Darauf aufbauend werden Kennwerte zur Ermittlung der Beanspruchung in den Kappen und den Tellerankern abgeleitet und hinsichtlich der messtechnischen Erfassung und Auswertung der Messdaten analysiert. N2 - Bridge caps ensure the separation of the traffic areas to roadway and sidewalk and must take up protection and guidance establishments. For the anchorage of the bridge caps at the superstructure depending on the requirements connection armouring and/or plate anchors are arranged. The present work analyses fundamental possibilities for the instrumentation examination of bridge caps with use of plate anchors. The theoretical and constructive bases of the cap design are regarded. In addition the connections between the occurring effects and their consequences for bridge caps are regarded. Characteristic values are derived into the ascertainment of the strain in the caps and the plate anchors and are analysed regarding the instrumentation collection and evaluation of the measuring data. KW - Brücke KW - Monitoring KW - Ingenieurbau KW - Anker KW - Dehnung KW - Dehnungsmessung KW - Brückenbau KW - Telleranker Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080307-13431 ER - TY - THES A1 - Bayer, Veit T1 - Zur Zuverlässigkeitsbeurteilung von Baukonstruktionen unter dynamischen Einwirkungen T1 - On the reliability assessment of building structures subjected to dynamic excitation N2 - Die Arbeit befaßt sich mit varianzmindernden Verfahren zur Monte Carlo Simulation von stochastischen Prozessen, zum Zweck der Zuverlässigkeitsbeurteilung von Baukonstruktionen mit nichtlinearem Systemverhalten. Kap. 2 ist eine Literaturstudie zu varianzmindernden Monte Carlo Methoden. In Kap. 3 wird die Spektrale Darstellung eines stationären, skalaren Gauß - Prozesses hergeleitet. Auf dieser Grundlage werden verschiedene Simulationsmodelle diskutiert. Das in Kap. 4 entwickelte varianzmindernde Simulationsverfahren basiert auf der Spektralen Darstellung. Nach einer ersten Pilotsimulation werden die Frequenzen für die Einführung zufälliger Amplituden bestimmt und deren Parameter angepaßt. Der zweite Lauf erfolgt mit diesen Parametern nach dem Prinzip des Importance Sampling. Das Verfahren wird in Kap. 5 für eine Brücke unter Erdbebenbelastung angewendet. Die Brücke ist mit sog. Hysteretic Devices zur Energiedissipation ausgerüstet. Es werden einerseits die Genauigkeit und Effizienz des Simulationsverfahrens, andererseits die Leistungsfähigkeit der Hysteretic Devices zur Erdbebenertüchtigung von Bauwerken demonstriert. N2 - Main topic is the development of variance–reducing Monte Carlo methods, for the purpose of reliability analyses of engineering structures with nonlinear behaviour. Ch. 2 is a literature survey on variance-reducing Monte Carlo methods. The Spectral Representation of a scalar, stationary Gaussian process is derived in ch. 3. On this basis, two popular simulation methods are discussed. The variance-reducing simulation concept developed in ch. 4 is based on the Spectral Representation. After a first pilot simulation, the frequencies are selected for introduction of amplitudes as random variables. In addition, the parameters of the amplitudes are adapted. This is the basis for the second simulation following the Importance Sampling principle. This simulation concept is utilized for reliability analysis of a bridge subjected to earthquake excitation in ch. 5. The bridge is equipped with Hysteretic Devices for dissipation of energy. The example demonstrates, on one hand, the accuracy and efficiency of the developed simulation method. On the other hand, the effectiveness of Hysteretic Devices for earthquake protection of building structures becomes evident. KW - Baukonstruktion KW - Dynamische Belastung KW - Zuverlässigkeit KW - Sicherheitstheorie KW - Erdbeben KW - Probabilistik KW - Brücke KW - Monte-Carlo Simulation KW - reliability assessment KW - earthquake KW - probabilistics KW - bridge KW - Monte Carlo simulation Y1 - 1999 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20040205-215 ER - TY - CHAP A1 - Schroeder, P. T1 - Ein stochastisches Modell zur Berechnung von Böeneinwirkungen auf Brückenbauwerke N2 - Zur Berechnung der Böeneinwirkungen auf ein Brückenbauwerk wird ein stochastisches Modell vorgestellt. Die Windkraft aus der Böenbelastung wird dabei als systemunabhängige Luftkraft betrachtet welche in mathematischer Hinsicht dadurch gekennzeichnet ist, daß die aeroelastischen Bewegungsdifferentialgleichungen inhomogener Natur sind und der Bewegungsablauf den Charakter einer erzwungenen abklingenden Schwingung hat. Ausgehend von den nicht linearen partiellen Differentialgleichungen für Verschiebung und Torsion wird mittels der Galerkin Prozedur ein System von totalen Differentialgleichungen abgeleitet. Die äußeren Luftkräfte werden als gefilterter Poissonprozess von Dirac Impulsen dargestellt. Zur Berechnung der statistischen Momente des Differentialgleichungssystem wird die Itô'sche Differentialformel erweitert und in ein System von algebraischen nicht linearen Gleichungen transformiert. Diese dienen zur Berechnung des Momentenverlaufs für den stationären Anteil des stochastischen Prozesses. Der Abschluß des so erhaltenen nicht linearen Gleichungssystems erfolgt über die Methode der Kumulantenabschlußtechnik. KW - Brücke KW - Windlast KW - Stochastisches Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4409 ER -