TY - THES A1 - Tauscher, Eike T1 - Vom Bauwerksinformationsmodell zur Terminplanung - Ein Modell zur Generierung von Bauablaufplänen T1 - From Building Information Model to Construction Scheduling - A Model for the Generation of Construction Work Plans N2 - Die effiziente und zielgerichtete Ausführung von Bauvorhaben wird in hohem Maße von der zugrunde liegenden Bauablaufplanung beeinflusst. Dabei ist unter Verwendung herkömmlicher Methoden und Modelle die Planung des Bauablaufs ein zumeist aufwändiger und fehlerträchtiger Prozess. Am Ende der gegenwärtig üblichen Vorgehensweise für die Planung eines Bauablaufs erfolgt lediglich die Dokumentation des Endergebnisses. Mögliche Ablaufalternativen, die im Verlauf der Planung betrachtet wurden, sind im resultierenden Bauablaufplan nicht enthalten und gehen verloren. Eine formale Kontrolle des geplanten Bauablaufs hinsichtlich seiner Vollständigkeit ist nur begrenzt möglich, da beispielsweise existierende Methoden der 4D-Visualisierung derzeit nicht ausreichend in den Prozess der Planung von Bauabläufen integriert sind. Gegenstand der vorliegenden Arbeit ist die Entwicklung eines neuen Modells für die Unterstützung der Bauablaufplanung. Dafür wird der größtenteils manuelle Vorgang der Bauablaufplanung auf Basis verfügbarer Bauwerksinformationsmodelle (BIM) weitestgehend automatisiert und die Methodik der 4D-Animation in den Prozess der Bauablaufplanung integriert. Ausgehend von in einer Erfahrungsdatenbank gespeicherten Informationen werden auf Basis einer Ähnlichkeitsermittlung Bauteilen des betrachteten BIM geeignete Vorgänge zugeordnet und mittels Algorithmen der Graphentheorie ein Workflowgraph aller mög\-lichen Bauablaufvarianten generiert. Aufgrund der vorgenommenen Kopplung des Bauablaufplans mit Bauteilen eines BIM und der visuellen Darstellung des Bauablaufs kann vom Planer im Rahmen der Modellierungsgenauigkeit des BIM auf die Vollständigkeit des Bauablaufplans geschlossen werden. Dies ermöglicht dem Anwender ein hohes Maß an Kontrolle des geplanten Bauablaufs bereits innerhalb der Planungsphase. Weiterhin unterstützt das entwickelte Modell die Integration von Ablaufvarianten, was deren Gegenüberstellung ermöglicht und die Wiederverwendbarkeit bereits geplanter Bauabläufe durch eine entsprechend ausgerichtete Abbildung des Modells. Die Anwendbarkeit des erarbeiteten Modells wird anhand einer prototypischen Implementierung nachgewiesen und anhand eines Praxisbeispiels verifiziert. N2 - The efficient and targeted execution of construction works is greatly affected by the underlying construction schedule. By using common methods and models for construction scheduling, this process is usually error-prone and expensive. In common practice, the focus of construction scheduling is limited to the documentation of the final result. Possible construction alternatives that were considered during the planning phase are not included in the resulting construction schedule and are lost for further consideration. A formal control of the planned construction schedule in terms of completeness is very limited, since existing methods such as 4D~visualization are insufficiently integrated in the planning process. The presented work addresses the development of a new model that supports the construction planning process. Therefore, the mostly manual process of construction planning will be largely automated based on available building information models (BIM) and integrates the methodology of 4D~animation into this process. Based on information stored in a knowledge database, appropriate tasks will be assigned to building elements of the considered BIM on the basis of similarity calculations. Subsequently, a workflow graph is generated by using algorithms of graph theory. Due to the resulting logical interconnection of BIM objects and schedule processes and the visual representation of the construction building process, it becomes possible for the planner to suggest on the completeness of the construction schedule. This allows for a high degree of control over the planned construction schedule, already during the planning phase. Furthermore, the developed model supports the integration of construction alternatives into the schedule to allow their comparison as well as the reusability of already planned construction schedules by an appropriately targeted model mapping. The developed model's applicability is shown based on a prototype implementation and verified using a practical example. T3 - Informatik in Architektur und Bauwesen - 7 KW - Terminplanung KW - Scheduling KW - Informationsmodell KW - Modell KW - Bauwesen KW - Animation KW - 4D KW - BIM KW - IFC KW - Generierung KW - Bauablaufplan KW - scheduling KW - building Information model KW - generation KW - automation KW - construction schedule Y1 - 2011 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20110927-15572 SN - 978-3-86068-452-8 ER - TY - THES A1 - Richter, Torsten T1 - Konzepte für den Einsatz versionierter Objektmodelle im Bauwesen T1 - Concepts for the application of versioned object models in the building industry N2 - Bauwerke sind in der Regel Unikate, für die meist eine komplette und aufwändige Neuplanung durchzuführen ist. Der Umfang und die Verschiedenartigkeit der einzelnen Planungsaufgaben bedingen ein paralleles Arbeiten der beteiligten Fachplaner. Darüber hinaus ist die Bauplanung ein kreativer und iterativer Prozess, der durch häufige Änderungen des Planungsmaterials und Abstimmungen zwischen den Fachplanern gekennzeichnet ist. Mithilfe von speziellen Fachanwendungen erstellen die Planungsbeteiligten verschiedene Datenmodelle, zwischen denen fachliche Abhängigkeiten bestehen. Ziel der Arbeit ist es, die Konsistenz der einzelnen Fachmodelle eines Bauwerks sicherzustellen, indem Abhängigkeiten auf Basis von Objektversionen definiert werden. Voraussetzung dafür ist, dass die Fachanwendungen nach dem etablierten Paradigma der objektorientierten Programmierung entwickelt wurden. Das sequentielle und parallele Arbeiten mehrerer Fachplaner wird auf Basis eines optimistischen Zugriffsmodells unterstützt, das ohne Schreibsperren auskommt. Weiterhin wird die Historie des Planungsmaterials gespeichert und die Definition von rechtsverbindlichen Freigabeständen ermöglicht. Als Vorbild für die Systemarchitektur diente das Softwarekonfigurationsmanagement, dessen Versionierungsansatz meist auf einem Client-Server-Modell beruht. Die formale Beschreibung des verwendeten Ansatzes wird über die Mengenlehre und Relationenalgebra vorgenommen, so dass er allgemeingültig und technologieunabhängig ist. Auf Grundlage dieses Ansatzes werden Konzepte für den Einsatz versionierter Objektmodelle im Bauwesen erarbeitet und mit einer Pilotimplementierung basierend auf einer Open-Source-Ingenieurplattform an einem praxisnahen Szenario verifiziert. Beim Entwurf der Konzepte wird besonderer Wert auf die Handhabbarkeit der Umsetzung gelegt. Das betrifft im Besonderen die hierarchische Strukturierung des Projektmaterials, die ergonomische Gestaltung der Benutzerschnittstellen und der Erzielung von geringen Anwortzeiten. Diese Aspekte sind eine wichtige Voraussetzung für die Effizienz und Akzeptanz von Software im praktischen Einsatz. Bestehende Fachanwendungen können durch geringen Entwicklungsaufwand einfach in die verteilte Umgebung integriert werden, ohne sie von Grund auf programmieren zu müssen. N2 - Structures are normally unique which often require a new, complete and complex design. The extensiveness and diverseness of the several planning tasks cause a parallel work of the involved planners. Furthermore, the building planning is a creative and iterative process that is characterised by frequent changes of the planning material and coordinations between the professional designers. The planners create different data models with dependencies between each other. The aim of this thesis is to ensure the consistency of the particular expert models by defining dependencies on the basis of object versions. A prerequisite is the development of all specialised applications with the established object-oriented programming paradigm. The sequential and parallel work of many planners is supported by an optimistic access model that does not require write locks. The history of the planning material will be stored additionally and the definition of release states is provided. The software configuration management served as a model for the system architecture whose versioning approach often relies on the client-server concept. The formal description of the used approach is done by the usage of the set theory and relational algebra to ensure its generality and independency from technologies. On the basis of this approach concepts for the application of versioned object models in civil engineering are formulated and verified at a practical scenario with a pilot implementation based on an open source engineering platform. A great importance was attached on the usability of the implementation. This affects especially the structuring of the project material, the ergonomic design of the user interface as well as the achievement of short response times. These aspects are a precondition for the efficiency and acceptance of the software by the practical users. Existing expert applications can be easily integrated in the distributed environment without programming them from scratch. T3 - Informatik in Architektur und Bauwesen - 3 KW - Computer Supported Cooperative Work KW - Objektorientierung KW - Bauplanung KW - Kooperation KW - Verteiltes System KW - Versionsverwaltung KW - Planungsprozess KW - Benut KW - Distributed computing KW - Computer Supported Cooperative Work KW - Object-oriented programming KW - Version control KW - Planning process Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100115-14935 ER - TY - THES A1 - Tulke, Jan T1 - Kollaborative Terminplanung auf Basis von Bauwerksinformationsmodellen T1 - Collaborative construction scheduling based on building information models N2 - Im Rahmen des sich derzeit vollziehenden Wandels von der segmentierten, zeichnungsorientierten zur integrierten, modellbasierten Arbeitsweise bei der Planung von Bauwerken und ihrer Erstellung werden Computermodelle nicht mehr nur für die physikalische Simulation des Bauwerksverhaltens, sondern auch zur Koordination zwischen den einzelnen Planungsdisziplinen und Projektbeteiligten genutzt. Die gemeinsame Erstellung und Nutzung dieses Modells zur virtuellen Abbildung des Bauwerks und seiner Erstellungsprozesse, das sog. Building Information Modeling (BIM), ist dabei zentraler Bestandteil der Planung. Die Integration der Terminplanung in diese Arbeitsweise erfolgt bisher jedoch nur unzureichend, meist lediglich in der Form einer nachgelagerten 4D-Simulation zur Kommunikation der Planungsergebnisse. Sie weist damit im Verhältnis zum entstehenden Zusatzaufwand einen zu geringen Nutzen für den Terminplaner auf. Gegenstand der vorliegenden Arbeit ist die tiefere Einbettung der Terminplanung in die modellbasierte Arbeitsweise. Auf Basis einer umfassende Analyse der Rahmenbedingungen und des Informationsbedarfs der Terminplanung werden Konzepte zur effizienten Wiederverwendung von im Modell gespeicherten Daten mit Hilfe einer Verknüpfungssprache, zum umfassenden Datenaustausch auf Basis der Industry Foundation Classes (IFC) und für das Änderungsmanagement mittels einer Versionierung auf Objektebene entwickelt.Die für die modellbasierte Terminplanung relevanten Daten und ihre Beziehungen zueinander werden dabei formal beschrieben sowie die Kompatibilität ihrer Granularität durch eine Funktionalität zur Objektteilung sichergestellt. Zur zielgenauen Extraktion von Daten werden zudem Algorithmen für räumliche Anfragen entwickelt. Die vorgestellten Konzepte und ihre Anwendbarkeit werden mittels einer umfangreichen Pilotimplementierung anhand von mehreren Praxisbeispielen demonstriert und somit deren praktische Relevanz und Nutzen nachgewiesen. N2 - In context of the current change from a segmented, drawing based to an integrated, model based planning approach for buildings and their construction processes, computer models are no longer used for physical simulations of structural characteristics only, but also as basis for coordination between different design disciplines and stakeholders. Thereby the collaborative compilation and utilisation of such a model which serves as virtual representation, the so called Building Information Modeling (BIM), is within the core of the new planning approach. But currently, construction sequence planning is only insufficiently integration in this new approach and mostly limited to a subsequent 4D-Simulation for communication of scheduling results. Consequently accruing additional effort for the model use cannot be fully justified by the resulting benefits. Therefore subject of the present thesis is a deeper integration of construction sequence planning into the model based way of working. Starting from a comprehensive analysis of general conditions and information needs during scheduling, concepts of a linking language for efficient reuse of model data, complete data exchange based on Industry Foundation Classes (IFC) and change management based on object versioning are presented. Data used during scheduling and its inherent relationships are described formally and a functionality of object splitting is developed to ensure the compatibility of data granularity. For the sake of target precise data extraction, algorithms of spatial queries are presented. All concepts are implemented in an extensive software package and their practical application is demonstrated by several examples. T3 - Informatik in Architektur und Bauwesen - 4 KW - Terminplanung KW - Scheduling KW - Informationsmodell KW - Kollaboration KW - Modell KW - Versionsverwaltung KW - Bauwesen KW - Teilung KW - Animation KW - Dreidimensionale Comp KW - 4D-Simulation KW - Bauwerksinformationsmodell KW - BIM KW - IFC KW - räumliche Anfragesprache KW - spatial query KW - object splitting KW - Building Information Model KW - construction KW - object versioning Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100805-15135 SN - 978-3-86068-416-0 ER - TY - THES A1 - Nour, Mohamed T1 - A Flexible Model for Incorporating Construction Product Data into Building Information Models N2 - When considering the integration and interoperability between AEC-FM software applications and construction products' data, it is essential to investigate the state-of-the-art and conduct an extensive review in the literature of both Building Information Models and electronic product catalogues. It was found that there are many reasons and key-barriers that hinder the developed solutions from being implemented. Among the reasons that are attributed to the failure of many previous research projects to achieve this integration aim are the proprietary developments of CAD vendors, the fragmented nature of construction product data i.e. commercial and technical data, the prefabrication versus on-site production, marketing strategies and brand-naming, the referencing of a product to the data of its constituents, availability of life-cycle data in a single point in time where it is needed all over the whole life-cycle of the product itself, taxonomy problems, the inability to extract search parameters from the building information model to participate in the conduction of parametric searches. Finally and most important is keeping the product data in the building information model consistent and up-to-date. Hence, it was found that there is a great potential for construction product data to be integrated to building information models by electronic means in a dynamic and extensible manner that prevents the model from getting obsolete. The study has managed to establish a solution concept that links continually updated and extensible life-cycle product data to a software independent building information model (IFC) all over the life span of the product itself. As a result, the solution concept has managed to reach a reliable building information model that is capable of overcoming the majority of the above mentioned barriers. In the meantime, the solution is capable of referencing, retrieving, updating, and merging product data at any point in time. A distributed network application that represents all the involved parties in the construction product value chain is simulated by real software tools to demonstrate the proof of concept of this research work. N2 - Die vorliegende Dissertation stellt ein flexibles und dynamisches Gebäudeinformationsmodell vor, mit dem die Produktinformationen der Bauteile erfragt und aktualisiert werden können. Dazu werden Beziehungen zwischen den Bauteilen im Gebäudeinformationsmodell und den Produktinformationen der Hersteller und Lieferanten definiert. Die Produktinformationen können über eindeutige Produktnamen und über verallgemeinerte Produktparameter identifiziert werden. Der Stand der Technik bei den digitalen Bauteilkatalogen besteht überwiegend in einer Beschreibung der Produkte in Dokumenten im HTML- oder PDF-Format. Diese Dokumente können mit Hilfe von Schlüsselwörtern durchsucht werden. Hierbei besteht das Problem, dass die Produktinformationen nicht dauerhaft den Objekten im Gebäudeinformationsmodell zuzuordnen sind. Demzufolge kann verfügbare CAD-Software die verwendeten Produkte der Bauteile nicht vollständig beschreiben. Da viele Prozesse aktuelle Informationen der Bauteilprodukte benötigen, ist eine Erweiterung vorhandener Gebäudeinformationsmodelle um diesen Aspekt erforderlich. Obwohl dies Gegenstand zahlreicher proprietärer Entwicklungen ist, ist der Austausch von Daten infolge fehlender Standardisierung nicht ohne Informationsverluste möglich. Diesem Thema widmen sich derzeit unabhängige Forschungsprojekte, in denen neue Taxonomien und Ontologien für die Beschreibung der Semantik von Bauteildaten auf Basis von XML entwickelt werden. Diese Lösungsansätze haben den Nachteil, dass die Produktinformationen der Hersteller und Lieferanten notwendigerweise in einer gemeinsamen Datenbasis gespeichert werden müssen. Die Untersuchung des Lebenszyklus von Bauwerken im Hinblick auf die Wertschöpfungskette und die Beschaffungskette ergab, dass die Informationen sowohl der Bauteile als auch der Produkte über die gesamte Lebensdauer des Bauwerks verfügbar sein müssen. Aus kaufmännischer Sicht besteht das Problem, dass die Produkte eines Herstellers unter verschiedenen Markennamen angeboten und verkauft werden. Untersuchungen haben gezeigt, dass der Markenname ein wesentlicher Faktor einer Marktstrategie ist. Auch die Zwischenhändler spielen hierbei eine wichtige Rolle – selbst dann, wenn die Geschäfte über das Internet abgewickelt werden. Bauteile haben die Besonderheit, dass sie teilweise oder ganz auf der Baustelle hergestellt werden. Dies muss bei der Konzeption eines Informationssystems, das sich mit der Wertschöpfungskette von Bauwerken befasst, beachtet werden. Eine Erkenntnis der vorliegenden Arbeit ist, dass eine parametrisierte Produktsuche nur möglich ist, wenn die Produkte eindeutige Namen und standardisierte Parameter besitzen. Dieser Lösungsansatz könnte die derzeitige Arbeitsweise in der Praxis ändern. Für die prototypische Umsetzung im Rahmen der Dissertation hat sich eine Abstützung auf das verfügbare IFC-Modell als besonders geeignet erwiesen, da dieses Modell nicht-proprietär, fachübergreifend sowie durch Eigenschaften erweiterbar ist. Der Kerngedanke des vorgestellten Lösungskonzepts besteht in der Entwicklung des OIP-Konzepts (Object Information Pack), welches eine dauerhafte und dynamische Datenquelle für Gebäudeinformationsmodelle behandelt. Die OIP ist nicht nur ein eindeutiger Produktname, sondern eine ganze Datenstruktur für Produktinformationen im Bauwesen. Die OIP besteht aus einer dreischichtigen Hierarchie, welche sich sowohl in der Struktur der Datenbasis als auch in der Struktur der Klassen widerspiegelt. Diese Struktur wird über eine Gruppe von Relationen vom OIP-Kern verwaltet. Das Format der OIP-Namen sowie die Verteilung der Daten zwischen den Beteiligten (produktunabhängige technische Daten und produktabhängige Daten der Lieferanten) sind die wesentlichen Neuerungen gegenüber den bekannten Ansätzen mit einer zentralen Datenbasis. Das in dieser Arbeit vorgestellte Lösungskonzept basiert auf einer eingehenden Betrachtung und Analyse der Beschaffungskette von Bauwerken unter Beachtung der Besonderheiten des Bauwesens. Es hat sich herausgestellt, dass das OIP-Konzept allein nicht ausreicht, um eine Brücke zwischen den Daten der Hersteller und Händler auf der einen und dem Kunden auf der anderen Seite zu schlagen. Darüber hinaus wurde eine integrierte Softwarelösung für die Umsetzung des Konzepts benötigt, die zum Zeitpunkt des Entstehens dieser Dissertation nicht verfügbar war. Daher hat der Autor Werkzeuge mit folgender Funktionalität entwickelt: Parsen von STEP-ISO-10303-P21-Dateien Interpretation der geparsten Daten in IFC2x-Java-Klassen Abbildung und Integration von Produktdaten in das IFC-Modell Instanziierung, Löschen und Änderung von Objekten Definition von Suchparametern durch den Anwender Extraktion von Suchparametern aus dem CAD/IFC-Model Durchführen von parametrisierten Suchen Bereitstellung verschiedener Arten der Visualisierung des IFC Modells Export des modifizierten IFC-Modells in Form einer STEP-P21-Datei Mit diesen Werkzeugen konnte das Konzept der Arbeit verifiziert werden. Aufgrund ihres flexiblen Entwurfs können diese Werkzeuge darüber hinaus auch bei anderen Problemstellungen im Zusammenhang mit dem IFC-Modell verwendet werden. Es handelt sich nämlich um einfache Werkzeuge, die eine Integration des IFC-Modells in andere Applikationen ermöglichen. Die Einführung des Konzepts in die Praxis erfordert die Verwaltung durch eine eigene Organisation. Die Rolle dieser OIP-Organisation und das Internetportal der Hersteller wurden ebenfalls innerhalb einer verteilten Applikation simuliert. Zur übersichtlichen Darstellung der Ergebnisse und zum Nachweis der Anwendbarkeit des Konzeptes wurden alle Werkzeuge mit einer graphischen Nutzeroberflächen ausgestattet. Schließlich möchte der Autor betonen, dass eine Übernahme eines solchen „Business Process Re-engeneering“ (BPR) Konzeptes in die industrielle Praxis nicht frei von Barrieren und Problemen ist. Aus der Literatur über Firmenkultur und Psychologie ist bekannt, dass Nutzer oft ablehnend auf die Einführung neuer Systeme reagieren, wenn diese die gewohnte Arbeitsweise in Frage stellen. Hierbei spielt es keine Rolle, ob das resultierende Ergebnis auf lange Sicht zu einer Optimierung und Reduzierung des Aufwands führt. Ein Wechsel der derzeitigen Praxis könnte jedoch erreicht werden, wenn einige innovative Unternehmen ihren Anwendern die Gelegenheit gäben, sich von den Vorteilen der neuen Arbeitsweise zu überzeugen. KW - Produktinformation KW - Bauteil KW - Informationsmodell KW - Construction Product data KW - IFC KW - BIM KW - Building Information Model Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060317-7781 ER - TY - THES A1 - Beer, Daniel G. T1 - Systementwurf für verteilte Applikationen und Modelle im Bauplanungsprozess T1 - System design for distributed applications and models in the planning process N2 - Der Planungsprozess im Konstruktiven Ingenieurbau ist gekennzeichnet durch drei sich zyklisch wiederholende Phasen: die Phase der Aufgabenverteilung, die Phase der parallelen Bearbeitung mit entsprechenden Abstimmungen und die Phase der Zusammenführung der Ergebnisse. Die verfügbare Planungssoftware unterstützt überwiegend nur die Bearbeitung in der zweiten Phase und den Austausch der Datenbestände durch Dokumente. Gegenstand der Arbeit ist die Entwicklung einer Systemarchitektur, die in ihrem Grundsatz alle Phasen der verteilten Bearbeitung und unterschiedliche Arten der Kooperation (asynchron, parallel, wechselseitig) berücksichtigt und bestehende Anwendungen integriert. Das gemeinsame Arbeitsmaterial der Beteiligten wird nicht als Dokumentmenge, sondern als Menge von Objekt- und Elementversionen und deren Beziehungen abstrahiert. Elemente erweitern Objekte um applikationsunabhängige Eigenschaften (Features). Für die Bearbeitung einer Aufgabe werden Teilmengen auf Basis der Features gebildet, für deren Elemente neue Versionen abgeleitet und in einen privaten Arbeitsbereich geladen werden. Die Bearbeitung wird auf Operationen zurückgeführt, mit denen das gemeinsame Arbeitsmaterial konsistent zu halten ist. Die Systemarchitektur wird formal mit Mitteln der Mathematik beschrieben, verfügbare Technologie beschrieben und deren Einsatz in einem Umsetzungskonzept dargestellt. Das Umsetzungskonzept wird pilothaft implementiert. Dies erfolgt in der Umgebung des Internet in der Sprache Java unter Verwendung eines Versionsverwaltungswerkzeuges und relationalen Datenbanken. N2 - The planning process in structural engineering can be characterized by three iterative phases: the phase of distribution of tasks, the phase of parallel working with cooperation among the planners and the phase of merging the results. Available planning software does only support the second phase and the exchange of data via documents. The objective of this thesis is the development of a software architecture that supports the three phases and all types of cooperation (asynchronous, parallel and reciprocal) in principle and integrates existing engineering applications. The common planning material is abstracted as a set of object versions, element versions and their relationships. Elements extend objects with application independent properties, called features. Subsets on the base of features are calculated for the execution of tasks. Therefore new versions of elements and objects are derived and copied into the planners’s private workspace. Already stored versions remain unchanged and can be referred to. Modifications base on operations that ensure the consistency of the versioned model. The system architecture is formally described with mathematical methods. Available information technology is analyzed and used for an implementation concept. The implementation concept is proven by a pilot applicable in the Internet. The implementation is based on the programming language Java, a version control system and a relational database. KW - Planungsprozess KW - Kooperation KW - Versionsverwaltung KW - Objektorientierung KW - Verteilte Anwendungen KW - Verteilte Modelle KW - cooperation KW - distributed applications KW - distributed models KW - versioning Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20060418-7892 N1 - Shaker Verlag, ISBN 3-8322-5060-3 ER - TY - CHAP A1 - Hauschild, Thomas A1 - Borrmann, André A1 - Hübler, Reinhard T1 - Integration of Constraints into Digital Building Models for Cooperative Planning Processes N2 - The uniqueness and the long life cycle of buildings imply a dynamically modifiable building model. The technological foundation for the management of digital building models, a dynamic model management system (MMS), developed by our research group, allows to explicitly access and to modify the object model of the stored planning data. In this paper, the integration of constraints in digital building models will be shown. Constraints are conditions, which apply to the instances of domain model classes, and are defined by the user at runtime of the information system. For the expression of constraints, the Constraint Modelling Language (CML) has been developed and will be described in this paper. CML is a powerful, intuitively usable object-oriented language, which allows the expression of constraints at a high semantic level. A constrained-enabled MMS can verify, whether an instance fulfils the applying constraints. To ensure flexibility, the evaluation of constraints is not implicitly performed by the systems, but explicitly initiated by the user. A classification of constraint types and example usage scenarios are given. KW - Architektur KW - Verteiltes System KW - Constraint KW - Modellierung Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1775 ER - TY - CHAP A1 - Soibelman, Lucio A1 - O'Brien, William A1 - Elvin, George T1 - Collaborative Design Processes: A Class on Concurrent Collaboration in Multidisciplinary Design N2 - The rise of concurrent engineering in construction demands early team formation and constant communication throughout the project life cycle, but educational models in architecture, engineering and construction have been slow to adjust to this shift in project organization. Most students in these fields spend the majority of their college years working on individual projects that do not build teamwork or communication skills. Collaborative Design Processes (CDP) is a capstone design course where students from the University of Illinois at Urbana-Champaign and the University of Florida learn methods of collaborative design enhanced by the use of information technology. Students work in multidisciplinary teams to collaborate from remote locations via the Internet on the design of a facility. An innovation of this course compared to previous efforts is that students also develop process designs for the integration of technology into the work of multidisciplinary design teams. The course thus combines both active and reflective learning about collaborative design and methods. The course is designed to provide students the experience, tools, and methods needed to improve design processes and better integrate the use of technology into AEC industry work practices. This paper describes the goals, outcomes and significance of this new, interdisciplinary course for distributed AEC education. Differences from existing efforts and lessons learned to promote collaborative practices are discussed. Principal conclusions are that the course presents effective pedagogy to promote collaborative design methods, but faces challenges in both technology and in traditional intra-disciplinary training of students. KW - Hochschulbildung KW - Entscheidungsunterstützung KW - Computer Supported Cooperative Work Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1948 ER - TY - CHAP A1 - Keller, Martin A1 - Antoniadis, George A1 - Menzel, Karsten T1 - Resource Management for the Construction Industry N2 - The management of resources is an essential task in each construction company. Today, ERP systems and e-Business systems are available to assist construction companies to efficiently organise the allocation of their personnel and equipment within the company, but they cannot provide the company with the idle resources for every single task that has to be performed during a construction project. Therefore, companies should have an alternative solution to better exploit expensive resources and compensate their fixed costs, but also have them available at the right time for their own business activities. This paper outlines the approach taken by the EU funded project “e-Sharing” (IST-2001-33325) to support resource management between construction companies. It will describe requirements for the management of construction resources, its core features, and the integration approach. Therefore, we will outline the approach of an integrated resource type model supporting the management and classification of construction equipment, construction tasks and qualification profiles. The development is based on a cross-domain analysis and evaluation of existing models. ... KW - Baubetrieb KW - Computerunterstütztes Verfahren KW - Betriebsmittel Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-1679 ER - TY - JOUR A1 - Likhitruangsilp, Veerasak A1 - Ioannou, Photios T1 - Risk-sensitive Markov Decision Process for Underground Construction Planning and Estimating N2 - This paper presents an application of dynamic decision making under uncertainty in planning and estimating underground construction. The application of the proposed methodology is illustrated by its application to an actual tunneling project—The Hanging Lake Tunnel Project in Colorado, USA. To encompass the typical risks in underground construction, tunneling decisions are structured as a risk-sensitive Markov decision process that reflects the decision process faced by a contractor in each tunneling round. This decision process consists of five basic components: (1) decision stages (locations), (2) system states (ground classes and tunneling methods), (3) alternatives (tunneling methods), (4) ground class transition probabilities, and (5) tunneling cost structure. The paper also presents concepts related to risk preference that are necessary to model the contractor’s risk attitude, including the lottery concept, utility theory, and the delta property. The optimality equation is formulated, the model components are defined, and the model is solved by stochastic dynamic programming. The main results are the optimal construction plans and risk-adjusted project costs, both of which reflect the dynamics of subsurface construction, the uncertainty about geologic variability as a function of available information, and the contractor’s risk preference. KW - Mehragentensystem KW - Lernendes System KW - Tunnel KW - Markowschke KW - Kette Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2247 ER - TY - JOUR A1 - Yabuki, Nobuyoshi A1 - Kotani, Jun A1 - Shitani, Tomoaki T1 - A Steel Bridge Design System Architecture using VR-CAD and Web Service-based Multi-Agents N2 - This paper presents a new design environment based on Multi-Agents and Virtual Reality (VR). In this research, a design system with a virtual reality function was developed. The virtual world was realized by using GL4Java, liquid crystal shutter glasses, sensor systems, etc. And the Multi-Agent CAD system with product models, which had been developed before, was integrated with the VR design system. A prototype system was developed for highway steel plate girder bridges, and was applied to a design problem. The application verified the effectiveness of the developed system. KW - Mehragentensystem KW - Lernendes System KW - Stahlbrücke KW - Virtuelle Realität Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-2146 ER -