TY - CHAP ED - Abrahamczyk, Lars ED - Schwarz, Jochen ED - Werner, Frank T1 - Model Validation and Simulation N2 - The Bauhaus Summer School series provides an international forum for an exchange of methods and skills related to the interaction between different disciplines of modern engineering science. The 2012 civil engineering course was held in August over two weeks at Bauhaus-Universität Weimar. The overall aim was the exchange of research and modern scientific approaches in the field of model validation and simulation between well-known experts acting as lecturers and active students. Besides these educational intentions the social and cultural component of the meeting has been in the focus. 48 graduate and doctoral students from 20 different countries and 22 lecturers from 12 countries attended this summer school. Among other aspects, this activity can be considered successful as it raised the sensitivity towards both the significance of research in civil engineering and the role of intercultural exchange. This volume summarizes and publishes some of the results: abstracts of key note papers presented by the experts and selected student research works. The overview reflects the quality of this summer school. Furthermore the individual contributions confirm that for active students this event has been a research forum and a special opportunity to learn from the experiences of the researchers in terms of methodology and strategies for research implementation in their current work. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 23 KW - Modeling KW - Validation KW - Simulation KW - Summer School Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130805-19969 SN - 978-3-86068-502-0 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - CHAP A1 - Raue, Erich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NONLINEAR ANALYSIS OF COMPOSITE CROSS-SECTIONS WITH PRE-DEFORMATIONS N2 - An energy method based on the LAGRANGE Principle of the minimum of total potential en-ergy is presented to calculate the stresses and strains of composite cross-sections. The stress-strain relation of each partition of the cross-section can be an arbitrary piecewise continuous function. The strain energy is transformed into a line integral by GAUSS’s integral theorem. The total strain of each partition of the cross-section is split into load-dependent strain and pre-strain. Pre-strains have to be taken into account when the cross-section is pre-stressed, retrofit-ted or influenced by shrinkage, temperature etc. The unconstrained minimum problem can be solved for each load combination using standard software. The application of the method presented in the paper is demonstrated by means of examples. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28804 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Raue, Erich ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NICHTLINEARE ANALYSE VON VERBUNDQUERSCHNITTEN - EIN NEUER ALTERNATIVER WEG N2 - A new approach to the non-linear analysis of cross-sections loaded by normal forces and bending moments is presented in the paper. The mechanical model is based on the LAGRANGE principle of minimum of total potential energy. Deformations, stresses and limit load parameters are obtained by solving a non-linear optimisation problem. The mathematical model is independent of the specifics of material. In addition to the stress strain relation and the specific strain energy W(ε) two further functions F(ε) and Φ(ε) are introduced to describe the material behaviour. Thus cracks in concrete, non-linearity of material etc. can be taken into account without basic modification of the numerical algorithm. For polygonal cross-sections the GAUSS' integral theorem is used. Numerical solutions of the non-linear optimisation problems can be found by application of standard software. Thus the analysis of reinforced concrete cross-sections or more general composite cross-sections with non-linear behaviour of material is as simple as in the case of linear elasticity. The application of the method is demonstrated for polygonal cross-sections. Pre-stresses or pre-strains can easily be included in the mathematical model. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30027 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg A1 - Schröter, Hendrik ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NON-LINEAR ANALYSIS OF SHELLS OF REVOLUTION USING MATHEMATICAL OPTIMISATION N2 - In the paper presented, reinforced concrete shells of revolution are analyzed in both meridional and circumferential directions. Taking into account the physical non-linearity of the material, the internal forces and the deflections of the shell as well as the strain distribution at the cross-sections are calculated. The behavior of concrete under compression is described by linear and non-linear stress-strain relations. The description of the behavior of concrete under tension must account for tension stiffening effects. A tri-linear function is used to formulate the material law of reinforcement. The problem cannot be solved analytically due to the physical non-linearity. Thus a numerical solution is formulated by means of the LAGRANGE Principle of the minimum of the total potential energy. The kinematically admissible field of deformation is defined by the displacements u in the meridional and w in the radial direction. These displacements must satisfy the equations of compatibility and the kinematical boundary conditions of the shell. The strains are linearly distributed across the wall thickness. The strain energy depends on the specific of the material behavior. Using integral formulations of the material law [1], the strain energy of each part of the cross-section is defined as a function of the strains at the boundaries of the cross-sections. The shell is discretised in the meridional direction. Various methods of numerical differentiation and numerical integration are applied in order to determine the deformations and the strain energy. The unknown displacements u and w are calculated by a non-restricted extremum problem based on the minimum of the total potential energy. From mathematical point of view, the objective function is a convex function, thus the minimum can be determined without difficulty. The advantage of this formulation is that unlike non-linear methods with path-following algorithms the calculation does not have to account for changing stiffness and load increments. All iterations necessary to find the solution are integrated into the “Solver”. The model presented provides many ways of investigating the influence of various material parameters on the stresses and deformations of the entire shell structure. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28818 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - NUMERISCHE ANALYSE VON VERBUNDQUERSCHNITTEN MIT NICHTLINEAREM MATERIALVERHALTEN UNTER BERüCKSICHTIGUNG VON VORVERFORMUNGEN N2 - The presented method for an physically non-linear analysis of stresses and deformations of composite cross-sections and members based on energy principles and their transformation to non-linear optimisation problems. From the LAGRANGE principle of minimum of total potential energy a kinematic formulation of the mechanical problem can be developed, which has the general advantage that pre-deformations excited by shrinkage, temperature, residual deformations after unloading et al., can be considered directly. Thus the non-linear analysis of composite cross-sections with layers of different mechanical properties and different preloading becomes possible and cracks in concrete, stiffness degradation and other specifics of the material behaviour can be taken into account without cardinal modification of the mathematical model. The impact of local defects on the bearing capacity of an entire element can also be analysed in this principle way. Standard computational systems for mathematical optimisation or general programs for spreadsheet analysis enable an uncomplicated implementation of the developed models and an effective non-linear analysis for composite cross-sections and elements. KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30039 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - THES A1 - Tartsch, Enrico T1 - Bewertung der Dauerstandfestigkeit von dampfgehärtetem Porenbeton auf der Grundlage von Kurzzeitversuchen T1 - Prediction of the Sustained Load Strength of Autoclaved Aerated Concrete on a Short-term Basis N2 - Im Rahmen der Arbeit wird das Tragverhalten von dampfgehärtetem Porenbeton unter einachsiger Druckbeanspruchung untersucht. Ziel ist es, einen Zusammenhang zwischen makroskopischen Spannungs-Dehnungs-Beziehungen, beanspruchungsbedingten Strukturänderungen und der Dauerstandfestigkeit herzustellen. Die Dauerstandfestigkeit stellt im Sinne der Arbeit eine elementare Gefügeschwelle dar, durch sie wird das stabile vom instabilen Tragverhalten abgegrenzt. Der Zusammenhang zwischen Strukturänderungen und Spannungs-Dehnungs-Verhalten wird anhand mechanischer Modelle analysiert. Diese Untersuchungen liefern die konzeptionelle Orientierung für die durchzuführenden Laborversuche. Die experimentelle Basis der Arbeit bilden Kurzzeit- und Langzeitversuche an Porenbetonzylindern unter einachsiger Druckbeanspruchung. Es werden Probekörper von drei Porenbetonwerken untersucht. Um den Einfluss der Lastgeschichte aufzuzeigen, wird die Versuchsdauer zwischen einer Sekunde und mehreren Wochen variiert. Die Versuche werden mit unterschiedlichen Lastregimen durchgeführt: sowohl mit monoton gesteigerter Beanspruchung bis zum Versagen bzw. bis zum vorgesehenen Beanspruchungsniveau als auch mit niederzyklischer Beanspruchung. Die Messdaten werden unter Einbeziehung der dreidimensionalen Ansätze der Spannungs- und Deformationstheorie hinsichtlich des sphärischen und des deviatorischen Anteils des Spannungs- und Verformungszustandes ausgewertet. Diese auf die separate Betrachtung der Volumen- und Gestaltänderung gestützte Auswertung liefert zusätzliche Erkenntnisse hinsichtlich der Zuordnung von reversiblen und irreversiblen Verformungen zu den Teiltensoräquivalenten. Entsprechend den Versuchsergebnissen ändert sich die Kompressibilität des Porenbetons belastungsabhängig. Bereits kurzzeitige Überlastungen oberhalb der experimentell ermittelten Dauerstandgrenze sind von signifikanten Änderungen der Kompressionssteifigkeit begleitet. Das qualitative Tragverhalten des Porenbetons, das bei Beanspruchungen oberhalb der Dauerstandfestigkeit grundsätzliche Änderungen erfährt, lässt sich so bereits im Kurzzeitversuch abgrenzen. Zusätzliche Auswertungen für Normalbeton und selbstverdichtenden hochfesten Beton weisen auf analoges Verhalten hin. Auf der Basis der durchgeführten Untersuchungen werden Konzepte vorgestellt, mit denen die Dauerstandfestigkeit im Kurzzeitversuch, das heißt mit einer Versuchsdauer von wenigen Stunden, prognostiziert werden kann. Damit können Untersuchungen zur Dauerstandfestigkeit, die eine grundlegende Größe zur Beurteilung der Tragfähigkeit darstellt, routinemäßig durchgeführt werden. N2 - This thesis is concerned with the behaviour of autoclaved aerated concrete (AAC) when it is subjected to uniaxial compressive loads. The objective is to ascertain the relationship between textural changes, macroscopic stress-strain relations and the sustained load strength of the material itself. Throughout the thesis, the sustained load strength is considered as a basic threshold level, i.e. as the boundary between stable and unstable load-bearing behaviour. First, the effect of textural changes on the stress-strain behaviour was analysed on a theoretical basis with the aid of mechanical models. Based on the results, experimental tests were then planned. Short-term as well as long-term tests were carried out using cylindrical specimens made of AAC. Three different types of AAC were tested. Different load histories were used: monotonically increased loads and low-cycle loads with the load level increased step by step. Within the context of the test data analysis, three-dimensional textural responses are taken into account. Uniaxial loading is regarded as a special case of multi-axial loading. The decomposition of the stress tensor and strain tensor respectively opens up the opportunity to obtain more detailed information about elastic and inelastic material properties. It can be shown that compressibility of AAC undergoes load-dependent changes. Even short-term overloads lead to significant textural changes; these can be detected by analysing the bulk modulus. On this basis, it is possible to give clear statements about the sustained load strength of AAC. Additional tests carried out on normal-strength concrete and self-compacting concrete display similar behaviour. This study outlines a way of predicting sustained load strength on a short-term basis. As a result, it will be possible to carry out routine investigations into the sustained load strength in the future. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 12 KW - Porenbeton KW - Beton KW - Tragverhalten KW - Dauerstandfestigkeit KW - Bruchverhalten KW - Experiment KW - Deformationsverhalten KW - zyklisch KW - Strukturänderung KW - elastische Eigenschaften KW - sphärisch KW - deviatorisch KW - Kompressibilität KW - textural changes KW - elastic properties KW - spherical KW - deviatoric KW - compressibility Y1 - 2008 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20080213-12926 ER - TY - CHAP A1 - Weitzmann, Rüdiger ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - SIMPLIFIED CYCLE-BASED DESIGN OF EXTREMELY LOADED STRUCTURES N2 - The design of safety-critical structures, exposed to cyclic excitations demands for non-degrading or limited-degrading behavior during extreme events. Among others, the structural behavior is mainly determined by the amount of plastic cycles, completed during the excitation. Existing simplified methods often ignore this dependency, or assume/request sufficient cyclic capacity. The paper introduces a new performance based design method that considers explicitly a predefined number of re-plastifications. Hereby approaches from the shakedown theory and signal processing methods are utilized. The paper introduces the theoretical background, explains the steps of the design procedure and demonstrates the applicability with help of an example. This project was supported by German Science Foundation (Deutsche Forschungsgemeinschaft, DFG) KW - Architektur KW - CAD KW - Computerunterstütztes Verfahren Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170327-30338 UR - http://euklid.bauing.uni-weimar.de/ikm2006/index.php_lang=de&what=papers.html ER - TY - CHAP A1 - Bargstädt, Hans-Joachim A1 - Tarigan, Rina Sari ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - RULE BASED EXPANSION OF STANDARD CONSTRUCTION PROCESSES T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - The paper introduces a systematic construction management approach, supporting expansion of a specified construction process, both automatically and semi-automatically. Throughout the whole design process, many requirements must be taken into account in order to fulfil demands defined by clients. In implementing those demands into a design concept up to the execution plan, constraints such as site conditions, building code, and legal framework are to be considered. However, complete information, which is needed to make a sound decision, is not yet acquired in the early phase. Decisions are traditionally taken based on experience and assumptions. Due to a vast number of appropriate available solutions, particularly in building projects, it is necessary to make those decisions traceable. This is important in order to be able to reconstruct considerations and assumptions taken, should there be any changes in the future project’s objectives. The research will be carried out by means of building information modelling, where rules deriving from standard logics of construction management knowledge will be applied. The knowledge comprises a comprehensive interaction amongst bidding process, cost-estimation, construction site preparation as well as specific project logistics – which are usually still separately considered. By means of these rules, favourable decision taking regarding prefabrication and in-situ implementation can be justified. Modifications depending on the available information within current design stage will consistently be traceable. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28229 SN - 1611-4086 ER - TY - CHAP A1 - Nasir, A.R. A1 - Bargstädt, Hans-Joachim ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - AMELIORATING EMPLOYABILITY IN CONSTRUCTION THROUGH BIM INNOVATION T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - Low-skilled labor makes a significant part of the construction sector, performing daily production tasks that do not require specific technical knowledge or confirmed skills. Today, construction market demands increasing skill levels. Many jobs that were once considered to be undertaken by low or un-skilled labor, now demand some kind of formal skills. The jobs that require low skilled labor are continually decreasing due to technological advancement and globalization. Jobs that previously required little or no training now require skilful people to perform the tasks appropriately. The study aims at ameliorating employability of less skilled manpower by finding ways to instruct them for performing constructions tasks. A review of exiting task instruction methodologies in construction and the underlying gaps within them warrants an appropriate way to train and instruct low skilled workers for the tasks in construction. The idea is to ensure the required quality of construction with technological and didactic aids seeming particularly purposeful to prepare potential workers for the tasks in construction without exposing them to existing communication barriers. A BIM based technology is considered promising along with the integration of visual directives/animations to elaborate the construction tasks scheduled to be carried on site. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28157 SN - 1611-4086 ER - TY - THES A1 - Krtschil, Anna T1 - Vergleich verschiedener Indikatoren in Bezug auf die Ökobilanz von Gebäuden N2 - Im Rahmen der Bachelorarbeit werden zwei Indikatoren zur Auswertung einer Ökobilanz gegenübergestellt. Die Umweltbelastungspunkte der Schweiz werden mit dem niederländischen ReCiPe verglichen. KW - Umweltbilanz KW - Ökobilanz KW - Umweltbelastungspunkte KW - ReCiPe KW - GaBi Software Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20150716-24340 ER -