TY - CHAP A1 - Abramian, A. K. T1 - Superelliptic Shells as new constructive Forms N2 - In the superelliptic shell joined to a circular cylinder bending stresses are absent when it is subjected to uniform pressure.Some geometrical characteristics have been found. Expressions for determining stresses in the shell crest(in the singular point of plane type) are suggested. The problem of a theoretical critical buckling load of an elongated shell supported by frames is studied. A critical buckling load for two shells with different specifications was found experimentally. KW - Schale KW - Ellipsoid KW - Beulung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4347 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Volkova, Viktorija T1 - The exact Solution of the free pre-stressed Bar-Oscillations N2 - In this paper the results of the investigations of the free oscillations of the pre-stressed flexible structure elements are presented . Two cases of the central preliminary stress are investigated : without intermediate fastening of the tie to the flexible element and with the intermediate fastening in the middle of the element length. The given physical model can be applied to the flexible sloping shells and arches, membranes, large space antenna fields (besides flexible elements). The peculiarity of these systems is the possibility of the non-adjacent equilibrium form existence at the definite relations of the physical parameters . The transition from one stable equilibrium form to another, non-adjacent form, may be treated as jump. In this case they are called systems with buckling or the systems with two potential «gaps». These systems commenced the new section of the mathematical physics - the theory of chaos and strange attractors. The analysis of the solutions confirms the received for the first time by the author and given in effect of the oscillation period doubling of the system during the transition from the «small» oscillations relatively center to the >large< relatively all three equilibrium conditions. The character of the frequency (period) dependence on the free oscillation amplitudes of the non-linear system also confirms the received earlier result of the duality of the system behaviour : >small< oscillations possess the qualities of soft system; >large< oscillations possess the qualities of rigid system. The >small< oscillation natural frequency changing, depending on the oscillation amplitudes, is in the internal . Here the frequency takes zero value at the amplitude values Aa and Ad (or Aa and Ae ); the frequency takes maximum value at the amplitude value near point b .The >large< oscillation natural frequency changes in the interval . Here is also observed . The influence of the tie intermediate fastening doesn't introduce qualitative changes in the behaviour of the investigated system. It only increases ( four times ) the critical value of the preliminary tension force KW - Bauteil KW - Vorspannung KW - Freie Schwingung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5356 ER - TY - JOUR A1 - Misztal, S. A1 - Misztal, G. T1 - Anwendung von Delta-Dirac-Funktion und Heviside-Funktion zur Berechnung der inneren Kräfte und Verschiebungen in gebogenen Balken N2 - Die d - Dirac - Funktion d(x-xi) und Heviside - Funktion wurden vor allem zur Beschreibung diskontinuierlicher Belastungsfunktionen von gebogenen Balken angewendet. Im Referat werden die mathematischen Operationen auf den erwähnten Funktionen dargestellt. Darüber hinaus wird die Möglichkeit eindeutiger Aufschreibung von belibigen Belestungsfunktionen vorgeschlagen, die fast alle Fälle der in der Ingenieurpraxis auftretenden Belastungen umfassen. Die vorgeschlagenen Lösungen geben die Möglichkeit leichter Aufschreibung im Form eines Algorithmus, das die Ausnutzung von Komputertechnik in statischen Berechnungen ermöglicht. Am Ende des Referates werden die Zahlebeispiele dargestellt, die die Möglichkeiten praktischer Anwendungen der besprochenen Funktionen darstellen. KW - Balken KW - Belastung KW - Mathematisches Modell KW - Computerunterstütztes Verfahren Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5308 ER - TY - CHAP A1 - Zoller, J. A1 - Maltret, J.-L. A1 - Poutrain, K. T1 - Models generation : from urban simulation to virtual reality N2 - The aim of researches conducted within gamsau about urban simulation, in particular Remus project, is to allow rapid modeling of large and regular urban zones, for purpose of interactive navigation (like VRML) or for realistic rendering (ray-tracing methods). One of problems to be solved in this context is the multiplicity of data formats : inputs come from different sources, and outputs are for heterogeneous systems of visualization. Typically CSG and boundary representation must be generated, treated and converted during building of models. Furthermore, the generated models can be more or less refined, depending on requests and type of use. This paper describes the general context of data models conversion, problems concerning levels of detail and implementation done in Remus, based on object oriented approach. KW - Stadtplanung KW - Objektmodell KW - Virtuelle Realität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4498 ER - TY - CHAP A1 - Kirichuk, A. A1 - Köppler, H. T1 - Numerical Algorithms and Computer Modeling for nonlinear Analysis of Shell Structures N2 - The dynamic behaviour of shells, which are widely used in construction and mechanical engineering as critical components of machinery and 3-D structures, under static and dynamic loadings is described by system of deep nonlinear differential equations. Solution of these equations can be received with assistance of technique basing on a modern numerical algorithms and computer modeling.. The system of nonlinear differential equations of vibration of the shells is proposed taking into account the inertia forces in the tangential and normal directions. Its solution is based on combination of parameter prolongation method, finite-difference method and the Newton-Kantorovich iterative algorithm that allows plotting the loading trajectories and determination of bifurcation points on them. Package of Applied Programs >SEVSOR< is a computation means to be used in research of deformation, stability and vibration in thin axically-symmetric shells of complicated shape Input data include information on shell geometry, physical and mechanical properties, bearing conditions, types of loadings and load application. Frame output of motion forms in real time or either in decelerated or accelerated time scales for creating cartoons or video films is used for analysis of the compound dynamic processes in shell-type structures. KW - Schale KW - Nichtlineares Phänomen KW - Modellierung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4382 ER - TY - JOUR A1 - Strukelj, A. T1 - Some Problems in Obtaining the Green's Function of the Layered Soil N2 - The frame of this paper is the development of methods and procedures for the description of the motion of an arbitrary shaped foundation. Since the infinite half-space cannot be properly described by a model of finite dimensions without violating the radiation condition, the basic problems are infinite dimensions of the half-space as well as its non-homogeneous nature. Consequently, an approach has been investigated to solve this problem indirectly by developing Green's function in which the non-homogeneity and the infiniteness of the half-space has been included. When the Green's function is known, the next step will be the evaluation of contact stresses acting between the foundation and the surface of the half-space through an integral equation. The equation should be solved in the area of the foundation using Green's function as the kernel. The derivation of three-dimensional Green's function for the homogeneous half-space (Kobayashi and Sasaki 1991) has been made using the potential method. Partial differential equations occurring in the problem have been made ordinary ones through the Hankel integral transform. The general idea for obtaining the three-dimensional Green's function for the layered half-space is similar. But in that case some additional phenomena may occur. One of them is the possibility of the appearance of Stonely surface waves propagating along the contact surfaces of layers. Their contribution to the final result is in most cases important enough that they should not be neglected. The main advantage of results presented in comparing to other obtained with numerical methods is their accuracy especially in the case of thin layers because all essential steps of Green's function evaluation except of the contour integration along the branch cut have been made analytically. On the other hand the disadvantage of this method is that the mathematical effort for obtaining the Green's function is increasing drastically with the increase of the number of layers. Future work will therefore be directed in simplifying of the above described process KW - Bodenmechanik KW - Geschichtetes Medium KW - Green-Funktion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5388 ER - TY - JOUR A1 - Kaplinski, O. T1 - Phenomenon of inhertia in the Production Systems reliability Analysis N2 - The paper analyses the influence of the effect of inertia on the reliability of production systems. Systems inertia represents the phenomenon of continuing work for some time after the breakdown of one of the former phases. In our considerations, inertia is treated as the time elapsed from the onset of breakdown till the system's inability to work. A special method had to be devised to investigate the effect of inertia in order to evaluate the reliability of production systems and to attempt algorithmization to control the reliability of production system by means of inertia or reserving. The method of reliability analysis is presented only in an inform aspect. The possibilities of increasing reliability of production systems are listed. A comparison of the redundancy method and inertia method is presented. The results of this comparison and simulated investigations of influence of inertia on reliability of system are essential scope of the paper. Selected conclusions are as follows: when inertia approaches the last phase in the system, its influence on the shape of the distribution of the system's ability increases; an increase in inertia causes an increase in the availability of the system which approaches a certain border value; dependence of the average of a system's disability on inertia has a saddle-like character whereas dependence of the number of breakdowns (stoppages) in the system has the nature of an S-curve. KW - Zuverlässigkeitstheorie KW - Trägheit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5320 ER - TY - JOUR A1 - Ganev, T. A1 - Marinov, M. T1 - Towards Optimal Designing of thin elastic Plates with a specific free Oscillations Frequency N2 - Thin elastic plates are the basic constructional elements and are very often subjected to dynamic effects especially in the machine-building structures. Their saving design of resonance conditions of operation is an extremely complicated task which cannot be solved analytically. In the present report an efficient and sufficiently general method for optimal design of thin plates is worked out on the basis of energy resonance method of Wilder, the method of the finite elements for dynamic research and the methods of parameter optimization. By means of these methods various limitations and requirements put by the designer to the plates can be taken into account. A programme module for numerical investigation of the weight variation of the plate depending on the taken variable of the designed thickness at different supporting conditions is developed. The reasons for the considerable quantity and quality difference between the obtained optimal designs are also analysed. KW - Platte KW - Optimierung KW - Freie Schwingung KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5375 ER - TY - JOUR A1 - Skrinar, Matjaz T1 - Computation of Stresses and Settlements under an arbitrary Point in Homogenous, elastic, isotropic Half-Space, under the Load described by a uniform Load over a general quadrilateral N2 - The problem of the computation of stresses and settlements in the half-space under various types of loads is often presented in geotechnical engineering. In 1885 Boussinesq advanced theoretical expressions to determine stresses at a point within an ideal mass. His equation considers a point load on the surface of a semi-infinite, homogeneous, isotropic, weightless, elastic half-space. Newmark in 1942 performed the integration of Boussinesq's equations for the vertical stress under a corner of a rectangular area loaded with a uniform load. The problem of the determination of vertical stresses under a rectangular shaped footing has been satisfactorily solved with renewal integration of the Boussinesq's equation over the arbitrary rectangle on surface of the half-space, with a non-uniform load represented with piecewise linear interpolation functions. The problem of the determination of stresses in the case when the footing shape is an arbitrary quadrilateral however remains unsolved. The paper discusses an approach to the computation of vertical stresses and settlements in an arbitrary point of the half-space, loaded with a uniform load, which shape in the ground plan can be a general four noded form with straight edges. Since the form is transformed into a biunit square and all integrations are performed over this area, all solutions are valid also for an arbitrary triangle by the implementation of the degeneration rule. KW - Halbraum KW - Isotropie KW - Spannung KW - Setzung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5338 ER - TY - CHAP A1 - Voß, A. A1 - Coulon, Carl-Helmut A1 - Gebhardt, F. T1 - KI-Methoden beim Entwurf komplexer Gebäude N2 - Anhand von Ergebnissen aus dem FABEL-Projekt wird gezeigt, welche Beiträge Methoden der Künstlichen Intelligenz, insbesondere der Wissensverarbeitung beim Entwurf komplexer Gebäude leisten können. Exemplarisch werden spezialisierte wissensintensive Methoden, und allgemeine fallbasierte Methoden zum Retrieval und zur Wiederverwendung früherer Entwürfe vorgestellt. Es werden Fragen der Integration von Wissen, Fällen und Daten diskutiert. Der Prototyp des FABEL-Projekts verwendet die Metapher der virtuellen Baustelle, um die verschiedenen Methoden als Planungswerkzeuge in einem CAD-System integriert anzubieten. Ein Planungsmodell dient der zusätzlichen Orientierung des Planers. Die Ergebnisse sind interessant für den Entwurf komplexer Unikate, dürften aber auch als Zusatz zu elektronisch angebotenen Katalogen relevant sein. KW - Bauentwurf KW - CAD KW - Künstliche Intelligenz Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4207 ER - TY - CHAP A1 - Raue, Erich A1 - Diener, Jörg T1 - Numerische Analyse des Langzeitverhaltens hochbeanspruchter Druckglieder unter Berücksichtigung des nichtlinearen Kriechens mit Hilfe der quadratischen Optimierung N2 - Bei der Berechnung von Stahlbeton- bzw. Spannbetonkonstruktionen müssen die Zusatzverformungen infolge Kriechen und Schwinden des Betons unter anderem dann berücksichtigt werden, wenn durch sie der Schnittgrößenzustand des Gesamttragwerks bzw. einzelner Tragwerksteile ungünstig verändert wird. Das trifft vor allem auf schlanke Druckglieder zu. Die Ermittlung der Kriechausmitte erfolgt im allgemeinen unter Zugrundelegung einer Kriechzahl, die vom Beanspruchungsniveau des Betons unabhängig ist. Diese Annahme ist unzulässig, wenn die Betonspannungen oberhalb des Gebrauchslastniveaus (>30..50% der Druckfestigkeit) liegen, da in diesem Bereich die Kriechdehnungen überproportional zu den kriecherzeugenden Spannungen anwachsen (nichtlineares Kriechen). Theoretische Untersuchungen zum Tragverhalten hochbeanspruchter Stahlbetonstützen unter Berücksichtigung des nichtlinearen Kriechens sind aufgrund der Komplexität des Problems und dem damit verbundenen Berechnungsaufwand gegenwärtig in nur geringem Umfang vorhanden. Im vorliegenden Beitrag wird ein Algorithmus vorgestellt, bei dem die Ermittlung der Schnittgrößen und Deformationen auf die sukzessive Lösung quadratischer Optimierungsaufgaben für im voraus festgelegte Betrachtungszeitpunkte zurückgeführt wird, wobei die Ergebnisse der vorangegangenen Zeitpunkte Eingangswerte für die Berechnung darstellen. Die Berücksichtigung der Nichtlinearität des Kriechens unter hoher Spannung sowie geometrisch nichtlinearer Effekte erfolgt iterativ innerhalb jedes Betrachtungszeitpunkts. Mit der Einführung von Spannungsbegrenzungen als zusätzliche Nebenbedingungen können in jeder Iteration Materialplastizierungen, Rißbildungen des Betons bzw. >tension stiffening<-Effekte ohne prinzipielle Veränderung des mathematischen Modells berücksichtigt werden. Durch Nachrechnung von Langzeitversuchen an Stahlbetonstützen erfolgt die Verifikation des Berechnungsmodells KW - Bauteil KW - Stahlbeton KW - Druckbelastung KW - Langzeitverhalten KW - Kriechen KW - Nichtlineares Phänomen KW - Optimierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4415 ER - TY - CHAP A1 - Menzel, Karsten A1 - Garrett, James H. A1 - Mahdavi, A. A1 - Ries, R. T1 - Processing "fuzzy" materials sets for environmental impact analysis of buildings N2 - Processing technical and environmental data on building materials, components, and systems has become more important during the last few years. Increased sensitivity towards environmental and energy problems has lead to the demand for simulation and evaluation of the long term behavior of buildings. The results of such simulations are expected to enable architects and engineers to develop a broader, interdisciplinary understanding of the impact of their products (buildings) on the environment. However, conducting such evaluations is currently hampered by the lack of comprehensive, up-to-date, and ecologically relevant data on building materials, components, and systems. To address this problem, this paper proposes an approach to deal with the absent or uncertain attributes of building materials, components, and systems. In the past, various information systems have been developed to provide data on a limited set of building materials, including precise values pertaining to some of their characteristics, such as availability, manufacturers, costs, etc. These traditional information systems have difficulty in dealing with uncertain, incomplete and sparse data. However, uncertainty and incompleteness characterize the nature of most of the available and environmentally related characteristics of materials, components, and systems. In this paper, a fuzzy-logic-based augmentation of traditional information systems is proposed towards providing management, utilization and manipulation of incomplete and uncertain data. KW - Bauwerk KW - Umweltfaktor KW - CAD KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4500 ER - TY - JOUR A1 - Kaiser, Wolfgang T1 - Die unbegrenzten Einsatzmöglichkeiten von 3D-Modellierern N2 - Der Funktionsumfang von 3D-Modellierern und die Leistung allgemein zur Verfügung stehender Rechnersysteme gestatten die Modellierung beliebiger Objekte in jeder nur denkbaren Fachdisziplin. Das potentielle Leistungsvermögen von 3D-Modellierern sollte Anreiz sein, sie so alltäglich einzusetzen, wie die etablierten Standardapplikationen. Die im Vortrag gezeigten Modelle umfassen ein kleines Spektrum der möglichen Anwendungsgebiete. Weder vom (Daten)Umfang noch von ihrem Kompliziertheitsgrad stellen sie etwas Besonderes dar. Sie sollen nur das Interesse für einen alltäglichen Einsatz von 3D-Modellierern wecken und eventuell vorhandenen Einsatzschwellen abbauen helfen. Die im Vortrag gezeigten Bildfolgen sind unter http://www.uni-weimar.de/animationen zu finden. KW - Dreidimensionales Modell KW - Anwendung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5257 ER - TY - CHAP A1 - Raue, Erich A1 - Timmler, Hans-Georg A1 - Schüler, H. T1 - Anwendung der mathematischen Optimierung bei der physikalisch und geometrisch nichtlinearen Analyse und Bemessung seismisch beanspruchter Tragwerke N2 - Moderne Bemessungskonzepte für seismisch beanspruchte Hochbauten, wie die Methode der Kapazitäts-bemessung, planen inelastisches Verhalten einzelner Bereiche der Konstruktion beim Entwurf bewußt ein, um so einen Teil der durch das Beben eingetragenen Energie als inelastische Formänderungsarbeit zu absorbieren. Wird bei Akzeptanz inelastischen Verhaltens eine bestimmte Belastungsintensität, die als adaptive Grenzlast oder Einspiellast bezeichnet wird, überschritten, kann es infolge zyklischer Einwirkungen zu einer unbe-grenzten Akkumulation inelastischer Deformationen kommen. Die adaptive Grenzlast stellt damit für zyklische Einwirkungen eine geeignete Kenngröße zur Bewertung der Tragwerksqualität dar, bei der neben der Sicherung des Gleichgewichts ein bestimmtes Schädigungsniveau nicht überschritten wird. Im vorliegenden Beitrag werden die Grundzüge eines Bemessungs- und Nachweiskonzeptes für seismisch beanspruchte Stahlbetontragwerke, das unter Einbeziehung der Grundprinzipe der Kapazitätsbemessung von einem einheitlichen Kriterium zur Beschreibung des Grenzzustandes der Tragfähigkeit auf der Basis der adaptive Grenzlast ausgeht, vorgestellt. Dabei ist die Abschätzung der Verformungen notwendiger Bestandteil des Nachweis- bzw. Bemessungskonzeptes. Bei Druckgliedern ist die Berücksichtigung des Einflusses der Verformungen notwendiger Bestandteil des Bemessungskonzeptes. Entsprechende Erweiterungen der Berechnungsmodelle zur Berücksichtigung des Einflusses geometrisch nichtlinearer Effekte im Sinne einer Theorie II. Ordnung werden vorgestellt. KW - Bauwerk KW - Erdbebenbelastung KW - Nichtlineares Phänomen KW - Optimierung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4421 ER - TY - CHAP A1 - Raue, Erich A1 - Vaidogas, E. R. A1 - Müller, Karl-Heinz T1 - Bewertung der Grenzlast von elastisch-plastischen Tragwerken mit Hilfe stochastischer Methoden N2 - Für die Analyse von Tragwerken sowohl des Stahlbaus als auch des Massivbaus eröffnet die nationale und internationale Normengebung in zunehmendem Maße die Anwendung physikalisch nichtlinearer Berechnungsmodelle. Es ist zu erwarten, daß neben dem traditionellen elastischen Berechnungsmodell das linearelastisch-idealplastische Materialmodell in die Tragwerksanalyse Eingang finden wird. Während bei den traditionellen Berechnungsverfahren auf der Grundlage der Elastizitätstheorie hinreichende Erfahrungen durch die Planungspraxis bestehen und umfangreiche Untersuchungen zur dabei erreichten Sicherheit vorliegen, stellen die nichtlinearen Berechnungsmethoden sowohl in mechanischer als auch in sicherheitstheoretischer Hinsicht ein neues Erfahrungsfeld dar. Im vorliegenden Beitrag werden aus der Vielzahl der anstehenden Probleme folgende Teilprobleme behandelt: Bestimmung der Versagenswahrscheinlichkeit elasto-plastischer Tragsysteme nach dem Kriterium der plastischen Grenzlast Ermittlung stochastischer Eigenschaften des plastischen Grenzlastparameters elasto-plastischer Tragsysteme. Die Lösung des mechanischen Problems geschieht über eine lineare Optimierungsaufgabe, die nach dem statischen Theorem der plastischen Grenzlast formuliert ist. Als stochastische Methode wird die Simulation angewandt, die zum einen auf einer zufälligen Erzeugung der Realisierungen (stochastische Simulation) und zum anderen auf einer planmäßigen Erzeugung der Realisierungen (konstruktive Simulation) beruhen kann. Für jedes der Teilprobleme wird ein Beispiel vorgestellt. KW - Tragwerk KW - Elastoplastizität KW - Grenzlast KW - Stochastisches Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4296 ER - TY - CHAP A1 - Hartmann, Friedel A1 - Maucher, Roland T1 - Zum Momentengleichgewicht bei Tragwerksberechnungen nach Theorie zweiter Ordnung N2 - Es wird gezeigt, daß zur Aufstellung eines korrekten Momentengleichgewichts nach Theorie zweiter Ordnung für Querkräfte die Hebelarme des unverformten Systems und für Normalkräfte Hebelarme des verformten Systems zu benutzen sind. Im Allgemeinen ist es aber nicht möglich, die Knotenverformungen eines Rahmens in relevante und nicht relevante Anteile zu zerlegen, so daß ein Momentengleichgewicht bei Berechnungen nach Theorie zweiter Ordnung im Allgemeinen nicht sinnvoll ist. KW - Baustatik KW - Theorie zweiter Ordnung KW - Biegemoment KW - Gleichgewicht Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4336 ER - TY - JOUR A1 - Fischer, A. A1 - Steinhage, V. T1 - Ein modellbasiertes Konzept zur städteplanerischen Kartierung durch digitale Bildanalyse N2 - There is an increasing need for 3D building extraction from aerial images for various applications such astown planning, environmental- and property-related studies. Aerial images usually reveal on one hand a certain amount of information not relevant for the given task of building extraction like vegetation, cars etc. On the other hand there is a loss of relevant information due to occlusions, low contrasts or disadvantageous perspectives. Therefore a promising concept for automated building reconstruction must incorporate a suffciantly complete model of the objects of interest. We propose a model-based approach to 3D building extraction from aerial images which reveals a tight coupling between a generic 3D object model and an explicit 2D image model. The generic object model employes domain specific volumetric primitives (i. e. building part models) and combination schemes. To cover the gap between 3D object models and 2D image data the image model is employed to predict the projective building appearences in aerial images. We present a strategy for a model-based building extraction based on the recognition-by-components principle and show first experimental results derived from international test sets KW - Stadtplanung KW - Kartierung KW - Bildanalyse KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4870 ER - TY - CHAP A1 - Schelle, H. T1 - Operations Research and Projektmanagement: kritischer Rückblick und Zukunftsperspektiven N2 - Anwendungen der Methoden des Operations Research in der Praxis des Projektmanagements sind so gut wie kaum zu finden. Diese Anwendungslücke ist umso erstaunlicher, als es eine große Zahl von theoretischen Veröffentlichungen zum Themenkreis >Operations Research und Projektmanagement< gibt . Der Beitrag arbeitet die verschiedenen Ursachen für die bislang geringe praktische Relevanz der Disziplin >Operations Research< heraus und macht Vorschläge, wie in Zukunft anwendungsfreundlichere Modelle entwickelt werden können. KW - Projektmanagement KW - Operations Research Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4227 ER - TY - JOUR A1 - Voronin, V. P. T1 - Renovation's peculiarities of industrial enterprises in conditions of economic selfsufficiency N2 - Probleme of recrienfation of building complex, to the sharp increase of share of reconstruction works, capital repair and modernisation of in-dustrial plants are concidered in this work. The conception of develop-ment and creation of unitified system of expluatation and renovation of industrial plants are worded out. This system is based on date-computer technology and taking into conciderations of real economic relations. KW - Bauwerk KW - Rekonstruktion KW - Wirtschaftlichkeit Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5296 ER - TY - JOUR A1 - Huhnt, Wolfgang T1 - Informationstechnische Integration im Bauwesen durch Nutzung fachspezifischen Anwenderwissens N2 - Im vorliegenden Beitrag wird ein Integrationskonzept vorgestellt, bei dem das fachspezifische Wissen des Anwenders integraler Bestandteil des Konzeptes ist. Grundgedanke des Konzeptes ist es, die Informationen vorerst im Kontext der Anwendung, mit der sie erstellt wurden, zu belassen. Die Interpretation der Informationen erfolgt durch den Anwender, der diese Informationen zur Integration nutzen möchte. Er weiß, welche Daten er für seine Arbeiten benötigt, und er verfügt über das erforderliche fachspezifische Wissen, um die Informationen anderer Bearbeiter verstehen zu können. Damit ist es nicht erforderlich, die internen Datenstrukturen einer Software zu verstehen und in einem neutralen Format zu beschreiben. Die Integration erfolgt interaktiv am Bildschirm durch den Anwender. Das vorgestellt Konzept wird in den Kontext der in der Literatur beschriebenen Integrationskonzepte eingegliedert. Hierzu werden die Integrationskonzepte klassifiziert. Die Klassifikation erfolgt auf der Grundlage der Software-Architekturen. Das vorgestellte Integrationskonzept wird am Beispiel der Angebotsbearbeitung im Bauwesen konkretisiert. KW - CAD KW - Dialogsystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4901 ER - TY - JOUR A1 - Ngo, D. Q. A1 - Rüppel, Uwe T1 - BINAS - Ein Entscheidungshilfesystem für die Bestandsanalyse von Bauwerken N2 - Bauwerke sind in ihrer Betriebszeit vielen nutzungseinschränkenden Einflüssen ausgesetzt. Die dadurch erforderliche Instandhaltung dient zur Gewährleistung und zur Erhöhung der geplanten Nutzungsfähigkeit sowie Dauerhaftigkeit von Bauwerken. Sie spielt eine immer größere Rolle im Bauwesen. Die Kosten der Bauwerksinstandhaltung betragen je nach Art des Bauwerkes in Deutschland pro Jahr ca. 1-6% des Wiederbeschaffungswertes. Die Reduzierung des Instandhaltungsaufwandes durch Technik- und Management-Maßnahmen ist daher wirtschaftlich sinnvoll. Der Einsatz moderner Informations- und Kommunikationstechnologie auf dem Gebiet der Bestandsaufnahme und -analyse ist erforderlich, um einerseits die Bearbeitung von multimedialen Informationen über Ist- und Soll-Zustände von Bauwerken effektiver durchzuführen und um andererseits die Analyse von Schäden im Sinne einer Entscheidungshilfe zu unterstützen. Durch den Einsatz der WWW-Technologie kann die Bearbeitung auch verteilt im Datennetz über ferne Rechner hinweg erfolgen. Im Beitrag werden die Konzeptionierung und Implementierung des WWW-fähigen DV-Systems BINAS zur Unterstützung der Bestandsaufnahme und -analyse sowie die dafür erforderlichen Methoden und Werkzeuge vorgestellt. KW - Bauwerk KW - Bauschaden KW - Instandhaltung KW - Entscheidungsunterstützungssystem Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4994 ER - TY - JOUR A1 - Wiedemann, A. T1 - Digital Architectural Photogrammetry for Building Registration N2 - For many purposes geometric information about existing buildings is necessary, e.g. planing of conservation or reconstruction. Architectural photogrammetry is a technique to acquire 3D geometric data of buildings for a CAD model from images. In this paper the state of the art in architectural photogrammetry and some developments towards automation are described. The photogrammetric process consists of image acquisition, orientation and restitution. Special attention is put on digital methods, from digital image acquisition to restitution methods, supported by digital image processing. There are a few field of development towards automation, e.g. feature extraction, extraction of edges and lines and the detection of corresponding points. The acquired data may be used in a CAD environment or for visualization in Virtual Reality Models, using digital orthoimages for texture mapping. KW - Bauwerk KW - Projektdokumentation KW - Photogrammetrie Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4892 ER - TY - CHAP A1 - Laabs, Andreas A1 - Pahl, Peter Jan T1 - Das Beobachterkonzept zum Erhalt der Konsistenz in Datenmodellen N2 - Die Aufgaben des Bauingenieurwesens sind dadurch geprägt, daß sowohl die Planung als auch die Ausführung von Bauwerken häufigen Änderungen unterliegen. Beschreibt man das Verhalten der Bauwerke und den Bauprozeß im Computer mit Modellen, so ändern sich Umfang und Struktur der Modelle als Folge der Änderung in Planung und Ausführung. Diesen Vorgang nennt man Dynamisierung des Modells. Die Dynamisierung führt zu Veränderungen und Inkonsistenzen in den Modellen der Anwendungen. Die Aktualisierung und Abstimmung von Beziehungen innerhalb eines Modells sowie die Sicherung der Konsistenz der Modelle untereinander sind daher von zentraler Bedeutung für die Lösung von Bauingenieuraufgaben. Seit den letzten 10 Jahren wird die objektorientierte Methode in der Modellierung für Anwendungen im Bauingenieurwesen intensiv entwickelt und eingesetzt. Es hat sich gezeigt, daß die Anwendung dieser Methode in wichtigen Bereichen der Modellierung zu Verbesserungen führt. Gleichzeitig hat sich aber auch herausgestellt, daß die für das Bauingenieurwesen wichtigen Aspekte der Aktualisierung und der Konsistenz nicht zweckmäßig beschreibbar sind. In diesem Beitrag wird eine einfache Modelliermethode in ihrem Konzept und ihrer Realisierung gezeigt, mit der sich die Aktualisierung von Objekten und Modellen sowie die Sicherstellung der Konsistenz in Systemen des Bauingenieurwesens bearbeiten lassen. KW - Bauwerk KW - Objektmodell KW - Datenmodell KW - Bauausführung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4310 ER - TY - JOUR A1 - Steinmann, Frank A1 - Hübler, Reinhard T1 - Vorgehensmodelle als Basis der Gestaltung durchgaengiger CAD-Systeme N2 - Für die Gestaltung einer durchgängigen Unterstützung des Entwurfsprozesses stehen gegenwärtig deskriptive Modelle der Entwurfsobjekte im Mittelpunkt der Untersuchungen. Diese Modelle gestatten das Ableiten von Repräsentationen sowie eine Weitergabe von Entwurfsergebnissen. Pragmatische Gliederungen des Entwurfsprozesses unterteilen diesen nach organisatorischen und betriebswirtschaftlichen Aspekten (Planbarkeit und Abrechenbarkeit) in eine Sequenz von Entwurfsphasen (HOAI). Diese Gliederungen berücksichtigen nicht das WIE des eigentlichen modellkreierenden Schaffensprozesses. Für ein echtes CADesign bildet dessen Klärung jedoch die erforderliche Voraussetzung. Im Beitrag wird dazu von einem vereinheitlichten Set generischer Entwurfsaktionen ausgegangen. Auch dann, wenn die verschiedenen Entwurfsphasen und die Entwurfshandlungen der einzelnen Ingenieurgewerke mit spezifische Entwurfsmodellen verbunden werden, besteht damit eine Grundlage zur methodischen Fundierung entsprechender CAD-Tools. Die methodische Verfahrensweise ähnelt der, die in Form von Styleguides zur Gestaltung von 'Graphical User Interfaces' vorgeschlagen wird. Wesentliche praktische Benutzungen solche Basisaktivitäten ergeben sich für: die Systematisierung computergestützter Entwurfshandlungen, insbesondere durch Erweiterung des deskriptiven um ein operationales Modell sowie deren erweiterte Interpretierbarkeit die Erzeugung wissensbasierter Werkzeuge zur automatischen Modellgenerierung/-konfiguration die Implementation von leistungsfähigen UNDO- bzw. TMS-Mechanismen. KW - CAD KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4568 ER - TY - JOUR A1 - Venturino, Ezio A1 - Raciti, F. T1 - Quaternion methods for random matrices in quantum physics N2 - The theory of random matrices, or random matrix theory, RMT in what follows, has been developed at the beginning of the fties to describe the sta- tistical properties of energy levels of complex quantum systems, [1], [2], [3]. In the early eighties it has enjoyed renewed interest since it has been recognized as a very useful tool in the study of numerous physical systems. Specically, it is very useful in the analysis of chaotic quantum systems. In fact, in the last years many papers appeared about the problem of quantum chaos which implies the quantization of systems whose underlying classical dynamics is irregular (i.e. chaotic). The simplest models considered in this eld are billi- ards of various shapes. From the the classical point of view, a point particle in a 2-dimensional billiard displays regular or irregular motion depending on the shape of the billiard; for instance motion in a rectangular or circular billi- ard is regular thanks to the symmetries of the boundary. On the other hand, billiards of arbitrary shapes imply chaotic motion, i.e. exponential diver- gence of initially nearby trajectories. In order to study quantum billiards we have to consider the Schroedinger equation in various 2-dimensional domains. The eigenvalues of the Schroedinger equation represent the allowed energy levels of our quantum particle in the billiard under consideration, while the eigenfunction norms represent the probability density of nding the particle in a certain position. The question of quantum chaos is whether the charac- ter of the classical motion (regular or chaotic) can in uence some properties KW - Quantenphysik KW - Quaternion Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5029 ER - TY - CHAP A1 - Montag, U. T1 - A New Efficient Concept for Elasto-plastic Simulations of Shell Responses N2 - For the analysis of arbitrary, by Finite Elements discretized shell structures, an efficient numerical simulation strategy with quadratic convergence including geometrically and physically nonlinear effects will be presented. In the beginning, a Finite-Rotation shell theory allowing constant shear deformations across the shell thickness is given in an isoparametric formulation. The assumed-strain concept enables the derivation of a locking-free finite element. The Layered Approach will be applied to ensure a sufficiently precise prediction of the propagation of plastic zones even throughout the shell thickness. The Riks-Wempner-Wessels global iteration scheme will be enhanced by a Line-Search procedure to ensure the tracing of nonlinear deformation paths with rather great load steps even in the post-peak range. The elastic-plastic material model includes isotropic hardening. A new Operator-Split return algorithm ensures considerably exact solution of the initial-value problem even for greater load steps. The combination with consistently linearized constitutive equations ensures quadratic convergence in a close neighbourhood to the exact solution. Finally, several examples will demonstrate accuracy and numerical efficiency of the developed algorithm. KW - Schale KW - Elastoplastizität KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4364 ER - TY - JOUR A1 - Krzizek, H. T1 - Zur bauingenieurgerechten Speicherung von Entwurfsplänen des konstruktiven Ingenieurbaues in Datenbanken N2 - Es wird gezeigt, daß im allgemeinen die Zeichnungsinhalte von Entwurfsplänen im konstruktiven Ingenieurbau in Teilzeichnungen zerlegt werden können, denen fachspezifische Objekte des Bauwesen entsprechen. Solche Objekte sind beispiels- weise Querschnitte, Träger, Stützen und Fundamente. Diese Teilobjekte werden durch eine unterschiedliche Anzahl von Parametern festgelegt werden. Wählt man für diese Parameter die entsprechendnen Fachbegriffe, so hat man durch diese die Möglichkeit die Teilobjekte auch in Datenbanken zu speichern. Neben den Sachparametern müssen auch zeichnungs- technische Werte, wie Maßstab, gewählte Längeneinheiten (m,cm..) und Einsatzpunkt - für die Lage des Teilobjektes im Gesamtplan - gespeichert werden. Zeichenmodule für jedes Teilobjekt können dann bei Aufruf eines bestimmten Planes aus den Daten der Datenbank die Teilzeichnungen generieren, sodaß eine Planspeicherung in der übliche Speicherform (Speicherelemente Punkt, Linie usw.) nicht mehr erforderlich ist. Neben der reinen Darstellung können die Programmodule auch dahingehend erweitert werden, daß auch die zugehörigen Berechnungen durchgeführt werden. Die numerischen Ergebnisse wie auch die Eingabewerte werden in einem alfanumerischen Dokument abgelegt. Damit ergibt sich dann ein Konstruktionsystem für den Entwurf, das insbesondere die Berechnung von Varianten sehr erleichertert. In Sonderfällen können auch die Pläne in ein Standard CAD Programm eingelesen werden, um allfällige Besonderheiten interaktiv zu ergänzen. Das relationale Modell wird weiters vorgestellt, nach dem die Zeichnungsinhalte gespeichert werden. Neben reinen Teilobjektsätzen werden auch Tabellensätze verwendet, um unter einem Namen mehrere numersiche Daten verwalten zu können. Es werden auch sogenannte Fort- setzungssätze besprochen, die in Entsprechung der stark unterschiedlichen Anzahl der Objektattibute verwendet werden. KW - Ingenieurbau KW - Bauzeichnung KW - Datenbankverwaltung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4850 ER - TY - JOUR A1 - Girlich, E. A1 - Kovalev, M. A1 - Zaporozhets, A. T1 - Standardization problem: Ressource Allocation in a Network N2 - We consider the standardization problem (SP) which can be formulated as follows. It is known demand bi in each type i in {1, 2, ..., n} of items. Production of yi items of the ith type brings a profit fi (yi), where fi is a nondecreasing concave function for each i in {1, 2, ..., n}.It is necessary to satisfy the demand and to maximize the total profit provided that there exist >standardization possibilities< . These possibilities means that some types of items can be replaced by some another types. We introduce generalized standardization problem (GSP) in which titems demand is given as the set of admissible demand vectors. We show that GSP and SP are special cases of the resource allocation problem over a network polymatroid. Ibasing on this observation we propose a polynomial time solution algorithm for GSP and SP. KW - Ressourcenallokation KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5172 ER - TY - CHAP A1 - Gabbert, U. A1 - Grochla, J. A1 - Köppe, H. T1 - Dynamic-explicit finite element simulation of complex problems in civil engineering by parallel computing N2 - The paper deals with the simulation of the non-linear and time dependent behaviour of complex structures in engineering. Such simulations have to provide high accuracy in the prediction of deformations and stability, by taking into account the long term influences of the non-linear behaviour of the material as well as the large deformation and contact conditions. The limiting factors of the computer simulation are the computer run time and the memory requirement during solving large scale problems. To overcome these problems we use a dynamic-explicit time integration procedure for the solution of the semi-discrete equations of motion, which is very suited for parallel processing. In the paper at first we give a brief review of the theoretical background of the mechanical modelling and the dynamic-explicit technique for the solution of the semi-discrete equations of motion. Then the concept of parallel processing will be discussed . A test example concludes the paper. KW - Tragwerk KW - Nichtlineares Phänomen KW - Zeitabhängigkeit KW - Finite-Elemente-Methode Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4259 ER - TY - JOUR A1 - Sellerhoff, F. A1 - Milbradt, Peter A1 - Lippert, C. T1 - Ein dimensionsunabhängiges topologisches Modell auf der Basis von Simplexen N2 - Die geometrische Modellierung hat in den Ingenieurwissenschaften eine große Bedeutung erlangt. Die Visualisierung von zwei- oder dreidimensionalen Problemstellungen ist aus heutigen Anwendungen nicht mehr wegzudenken. Zunehmend rücken Aufgabenstellungen aus dem Bereich der geometrischen Modellierung in den Vordergrund, die über die etablierten Dimensionen 1-3 hinausgehen und die nicht mehr rein geometrischer Natur sind. Hierzu zählen Aufgabenstellungen aus den Bereichen numerische Simulation, Parameteridentifikation und Strukturanalyse. Auf diese nicht-geometrischen Aufgabenstellungen sollen geometrische Verfahren, wie z.B. Triangulation, konvexe Hülle, geometrischer Schnitt und Interpolation angewendet werden. Hierzu werden diese Algorithmen, die alle auf der klassischen Geometrie des euklidischen Raumes beruhen, auf ihre Übertragbarkeit hin analysiert und überarbeitet. Am Beispiel einer Parameteridentifikation wird eine systematische Vorgehensweise vorgestellt, die es ermöglicht, trotz weniger Versuchsrechnungen den Bereich der in Frage kommenden Parameter umfassend zu beschreiben. Dies ermöglicht ein besseres Verständnis der Zusammenhänge der Parameter untereinander. Häufig existieren mehr als eine Parameterkombination, so daß diese eine Isolinie formen, die ihrerseits unendlich viele Lösungen des gestellten Problemes im Untersuchungsgebiet beschreibt. KW - Parameteridentifikation KW - Strukturanalyse KW - Visualisierung KW - Mehrdimensionalität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4616 ER - TY - CHAP A1 - Wasserfuhr, R. A1 - Scherer, Raimar J. T1 - Information Management in the Concurrent Design Process N2 - Former achievements for integrated information management have concentrated on interoperability of applications like e.g. CAD, structural analysis or facility management, based on product models introducing additional application independent model layers (core models). In the last years it has become clear, that besides interoperability of autonomous applications, the concurrent processes of model instantiation and evolution have to be modeled, including the relationship to available project resources, persons, legal requirements and communication infrastructure. This paper discusses some basic concepts for an emerging methodology relating the fields of product modeling, project management and workflow systems by elaborating the concept of a process model, which gives a decomposition of the project goals into executable activities. Integrated information management systems should be related to process models to detect pending activities, deadlocks and alternatives of execution. According to the heterogeneous nature of project communication processes, a method for dynamic classification of ad-hoc activities is suggested, that complements predefined highlevel process definitions. In a brief outline of the system architecture, we show how sophisticated information management systems can be broadly made available by using conventional Internet technologies. KW - Informationsmanagement KW - Produktmodell KW - Prozessmodell KW - Prozessmanagement KW - Internet Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4456 ER - TY - JOUR A1 - Möller, B. A1 - Beer, M. A1 - Graf, W. A1 - Hoffmann, Alfred T1 - Sicherheitsbeurteilung von Tragwerken mit Fuzzy-Modellen N2 - Die Sicherheit von Tragwerken hängt von der zuverlässigen Modellierung sämtlicher Tragwerksparameter ab. Üblicherweise werden diese Parameter als deterministische oder stochastische Größen beschrieben. Stochastische Größen sind Zufallsgrößen, die unscharfe Informationen über Tragwerksparameter mit Hilfe von Dichtefunktionen erfassen. Nicht alle unscharfen Tragwerksparameter lassen sich als Zufallsgrößen darstellen. Sie können jedoch als Fuzzy-Größen modelliert werden. Fuzzy-Größen beschreiben unscharfe Tragwerksparameter als unscharfe Menge mit Bewertungsfunktion (Zugehörigkeitsfunktion). Die Fuzzy-Modellierung im Bauingenieurwesen umfaßt die Fuzzifizierung, die Fuzzy-Analyse, die Defuzzifizierung und die Sicherheitsbeurteilung. Sie erlaubt es, Tragwerke mit nicht-stochastischen unscharfen Eingangsinformationen zu untersuchen. Nicht-stochastische Eingangsinformationen treten sowohl bei bestehenden als auch bei neuen Tragwerken auf. Die unscharfen Ergebnisse der Fuzzy-Modellierung gestatten es, das Systemverhalten zutreffender zu beurteilen; sie sind die Ausgangspunkte für eine neue Sicherheitsbeurteilung auf der Grundlage der Möglichkeitstheorie. Bei der Fuzzy-Analyse ist die alpha-Diskretisierung vorteilhaft einsetzbar. Bei fehlender Monotonie der deterministischen Berechnungen und unter Berücksichtigung der Nichtlinearität wird die Fuzzy-Analyse mit Optimierungsalgorithmen durchgeführt. Zwei Beispiele werden diskutiert: die Lösung eines transzendenten Eigenwertproblems und eines linearen Gleichungssystems. Die Systemantworten der Fuzzy-Analyse werden der Sicherheitsbeurteilung zugrunde gelegt. Für ausgewählte physikalische Größen werden Versagensfunktionen definiert. Diese bewerten die Möglichkeit des Versagens. Mit Hilfe von Min-max-Operationen der Fuzzy-Set-Theorie erhält man aus Versagensfunktion und Fuzzy-Antwort die Versagensmöglichkeit bzw. die Überlebensmöglichkeit. Die ermittelte Versagensmöglichkeit repräsentiert die subjektive Beurteilung der Möglichkeit, daß das Ereignis &qout;Versagen&qout; eintritt. Beispiele zeigen die Unterschiede zwischen der Sicherheitsbeurteilung mittels Fuzzy-Modells und mittels deterministischen Modells. KW - Tragwerk KW - Sicherheit KW - Fuzzy-Logik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4625 ER - TY - JOUR A1 - Perepelitsa, V. A. A1 - Pinchuk, V. P. A1 - Sergeeva, L. N. A1 - Pozdnjakova, A. J. T1 - Fractal Graphs and their Properties N2 - The idea of representing urban structure and various communication systems (water and energy supply, telephone and cable TV networks) as fractal objects is not absolutely new. However, known works, devoted to this problem use models and approaches from fractal physics. For example, to simulate urban growth Diffusion Limited Aggregation (DLA) model and Dielectric Breakdown (DB) model are used. This study introduces a different approach. Net structure of communication system is described by a graph of special type called regular G(l,r,n)-graph. Authors provide description of such graph, develop iterative process for its generation and prove its self-similarity, i.e. that every regular graph is a pre-fractal. After the infinite number of steps this process generates a fractal. The devised algorithm for generation and grathical representation of regular G(l,r,n)-graphs with different values of l,r and n has been programmed to receive computer simulations. For optimal graphic presentation of pre-fractals the Optimal Space Ordering method was suggested. It is based on the minimization of the >graph energy< value about vertices' coordinates. The effective procedure for optimization was developed that takes into account specific properties of graph energy as objective function For the fractal graph introduced the Hausdorff-Besikovich and similarity dimensions were calculated. It has been shown that >graph energy< is directly related to the graph's fractal properties. For G(3,3,n) and G(4,4,n) graphs fractal dimensions calculated by different methods are the same (D=1,5 and D=2 respectively), while topological dimension of both graphs is 1. KW - Versorgungsnetz KW - Fraktal KW - Graphentheorie Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5166 ER - TY - JOUR A1 - Bakurova, A. V. A1 - Perepelitsa, V. A. A1 - Zin'kovskaya, J. S. T1 - Research of Stability of Vector Problem of spanning Tree with topological Criteria N2 - A multicriterial statement of the above mentioned problem is presented. It differes from the classical statement of Spanning Tree problem. The quality of solution is estimated by vector objective function which contains weight criteria as well as topological criteria (degree and diameter of tree). Many real processes are not determined yet. And that is why the investigation of the stability is very important. Many errors are connected with calculations. The stability analysis of vector combinatorial problems allows to discover the value of changes in the initial data for which the optimal solution is not changed. Furthermore, the investigation of the stability allows to construct the class of the problems on base of the one problem by means of the parameter variations. Analysis of the problems with belong to this class allows to obtaine axact and adecuate discription of model KW - Spannender Baum KW - Vektorfunktion KW - Stabilität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5159 ER - TY - JOUR A1 - Schneider, Ulrich A1 - Beucke, Karl T1 - Standardisierung der Kommunikation als Integrationsansatz für das Bauwesen N2 - Eine der wichtigsten Aufgaben und Herausforderungen der Bauinformatik ist gegenwärtig die Realisierung des durchgängigen, fachübergreifenden Datenflusses im Planungsprozeß eines Bauvorhabens. Im Hinblick auf die internationale Wettbewerbsfähigkeit der deutschen Bauwirtschaft ist es unumgänglich, vorhandene Effizienzpotentiale in der Bauplanung auszuschöpfen, welche durch eine qualitative Verbesserung der Planung sowie durch eine Verringerung der Bearbeitungszeit aller beteiligten Fachplanern erreicht werden können. Nach dem gegenwärtigen Stand der Technik werden die Informationsobjekte standardisiert, damit sie durchgängig nutzbar sind. Diese werden in einem allgemeingültigen Format den speziellen Programmen der Fachplaner zur Verfügung gestellt. In dieser Arbeit wird der Ansatz verfolgt, eine Integration durch die Standardisierung der Kommunikation zwischen den Informationsobjekten und ihren Anwendungsprogrammen zu erreichen. Dabei kann auf die Standardisierung der zu übertragenden Objekte verzichtet werden. Ziel der Ausarbeitung ist die Definition von implementationstechnischen Regeln, die alle auszutauschenden Objekte sowie die Anwendungen, die solche Objekte aufnehmen wollen, erfüllen müssen. Die Bearbeitung der Objekte soll in den gewohnten Anwendungen in unveränderter Weise erfolgen. KW - Bauwesen KW - Datenaustausch KW - Standardisierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5483 ER - TY - JOUR A1 - Strukelj, A. A1 - Skrinar, Matjaz T1 - The Evaluation of the Dynamical Soil-Bridge Interaction N2 - In the design of a structure, the implementation of reliable soil-foundation-structure interaction into the analysis process plays a very important role. The paper presents a determination of parameters of a suitably chosen soil-foundation model and their influence on the structure response. Since the mechanical data for the structure can be determined with satisfactory accuracy, the properties of the soil-foundation model were identified using measured dynamic response of the real structure. A simple model describing soil-foundation structure was incorporated into the classical 3-D finite element analysis of the structure with commercial software. Results obtained from the measured data on the pier were afterwards compared with those obtained with the finite model of the pier-foundation-soil structure. On the basis of this comparison the coefficients describing the properties in the soil-foundation model were adjusted until the calculated dynamic response coincided with the measured ones. In this way, the difference between both results was reduced to 1%. Full-scale tests measuring eigenmotion of the bridge were performed through all erection stages of the new bridge in Maribor. In this way an effective and experimentally verified 3-D model for a complex dynamic analysis of the bridge under the earthquake loading was obtained. The significant advantage of the obtained model is that it was updated on the basis of the dynamic measurements thus improving the model on the basis of in-situ geomechanical measurements. The model is very accurate in describing the upper structure and economical in describing the soil mass thus representing an optimal solution regarding computational efforts. KW - Boden-Bauwerk-Wechselwirkung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5397 ER - TY - JOUR A1 - Melnikov, B. E. A1 - Kadashevich, I. Y. A1 - Semenov, Artem T1 - Damage of Metalworkses under the Complex Varying Loading N2 - The phenomenological and computational aspects of the various damage models applications for the low and multi cyclic fatigue processes are investigated. Damage is considered as internal state variable, describing macroscopic effects of the progressive material degradation, within the framework of continuum damage mechanics. Present analysis is restricted to the case of isotropic damage, which can be modeled by a scalar variable. The strain, force and power types of kinetic equations for the damage evolution description are considered. The original mixed strain-power type damage model is developed for taking into account the different physical fracture mechanism in monotone and cyclic loading. The constitutive equations of plastic flow theory coupled and uncoupled to damage has been considered. The rational algorithm of implementation into finite element code is considered for developed damage models. Set of the computational experiments has been carried out for the various structures (huge aerials, pipelines, fastening units, vessel of nuclear reactor) and cases of loading. The comparison of the predictions of the developed model with experimental data is performed for 1X18H10T steel tubular specimens for complex paths of loading and for complex profiles beams under cyclic loading. Damage field distribution is the basic information for the prediction of crack initiation in structures. The developed method of structural parameter for stress concentration zones is discussed for correcting of crack location. It allows to describe the crack initiation near surface domain as observe in numerous experiments. KW - Stahlkonstruktion KW - Bruchmechanik KW - Dynamische Belastung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5409 ER - TY - JOUR A1 - Routmann, Y. L. T1 - Pseudorigidity method for solving the problem of limit equilibrium of rigid-plastic constructions N2 - 1.Design calculations , based upon the theory elasticity , cannot completely satisfy engineers and designers , because cannot answer to basic question about overload capability . Only design calculations of limit equilibrium of rigid-plastic constructions can answer to this question completely enough. As a rule , such design calculations are made issue from hypothesis, that material of construction has rigid-plastic diagram Prandtl .This scheme of calculation gives qualitatively more correct results, then usual calculation, based upon law Hooke’s , and allows more really estimate ultimate strength of construction due to different loads. Universal algorithms for solving the problem of limit equilibrium have been created since the middle of the 60’s.These algorithms are based upon two basic theorems about limit analysis - static and kinetics. It was found , that with the help of above-mentioned theorems the problem of limit equilibrium can be formulated as a problem of linear programming (for linear yield) or nonlinear programming (for yield Guber-Mizes). The method of linear programming conformably to calculation of rod systems got the most development in the reports Prager W. [1] and Chiras A. [ 2 ]. The method of linear programming conformably to plates and shells was widely used by Rganizin A.[3]. [3[ contains more full bibliography about this problem. Calculation of limit equilibrium with the help of linear and nonlinear programming has a few significant lacks: - complexity and laboriousness preliminary preparation of problem for PC; - necessity to use special program means , which are not in usual program packet for strength analysis. Author worked out a new method about design calculation of limit equilibrium without above-mentioned lacks . The method is based upon analogy of relations between internal generalized efforts and generalized deformations in elastic system and between generalized efforts and velocities of change generalized deformations in rigid-plastic system. Because later rigid-plastic deformation would be treated as an elastic deformation in the system with special constructed rigidities , this method could be called >pseudorigidity method<. KW - Plastizitätstheorie KW - Gleichgewicht KW - Grenzzustand Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5447 ER - TY - JOUR A1 - Piskunov, V. G. A1 - Marchuk, A. V. T1 - Model of stressed-strained State of Multilayer Masses with regard for Non-Ideal Contact of Layers N2 - Thus, mathematical model stressed- strained of a condition of layered masses is constructed. The model has high accuracy. It allows to simulate slippery contact of layers without friction. Thus not the order of permitting system of the equations is increased, and at its realization the method of fenite elements does not increase quantity of required degrees freedom. The differential operators included in system the equations are similar known in the classical theory of shells. It facilitates construction of a finite element. Presence in system of the differential equations of derivative of external forces allows to use her for the decision of contact problems with a stain of contact commensurable with thickness of a masses. KW - Geschichtetes Medium KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5427 ER - TY - JOUR A1 - Kochkarov, A. M. A1 - Popova, E. V. A1 - Zinchenko, O. A. T1 - Multicriteria problems of regulation when planning building processes N2 - In the rpocess of project construction organization under conditions of limited resources the problem of investor arises, which in onecriteria setting is as follows N invsted projects reindexed i=1,2,...,n are considered, initial parameters of the problem are:- duraion of iproject construction, - expected profit per unit of time from i project after putting it info operation ,-the time fixed , after the expiry of it a fine is paid for each overdued unit of time units in number. The investor resources are limited, i.e., at every moment of time investor can provid delivering of necessary resources only for one project .Any admissible problem decision of investor represents one of n! permutation of of numbers 1,2,..,n. X={x}-is the set of all admissible solutions (SAS) of this problem . In works of different authors the quality of decision is evaluated either by objective function (OF) of the type MINSUM where,by the objective function of the of the type MINMAX Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5454 ER - TY - JOUR A1 - Salpagarova, A. A. A1 - Temirbulatov, P. I. T1 - On one systemic Development of the Problem of Allocation N2 - Problem of discretic programming in conditions of manycriterial is considered. Set of work, being subject to fulfilment, is available. Are certain also: set of the executors; set, machines; set of resources (materials, semifinished items and etc.) and other set. As a functional complex name set, which will be formed, when on one representative of each of the specified sets is nominated to one working place. The allowable decision of a examined problem represents set of not crossed complexes provided that, for each working place one functional complex is certain in the accuracy. The elementary case of a formulated above problem is known under the name >a problem about purposes< [1], when the complex is defined as a pair >an executor - working place<. In case of three-element complexes we come to a problem about three-combinations. In a general case the complex consists from m of elements and the problem of formation of m-element complexes is formulated on the m-colour column. KW - Entscheidung bei mehrfacher Zielsetzung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5431 ER - TY - JOUR A1 - Schulz, Thomas A1 - Kirschke, Heiko A1 - Schatter, G. T1 - Das Internet als Basis für die Produktinformation im Bauwesen N2 - Die Gesamtheit der Produktinformationen im Bauwesen stellt sich als sehr inkonsistente und redundante Informationsmenge dar. Die Hersteller stehen vor der Aufgabe, diese Produktinformationen nicht nur in der üblichen Katalogform sondern auch in neuen Medien wie CD-ROM und WWW zu publizieren. Einmal betriebener Erfassungsaufwand muß sich dabei durch eine einfache Mehrfachverwendung der Daten rentieren. Wegen seiner technologischen Eigenschaften eignet sich das WWW sehr gut als primäre Quelle für Produktinformationen. Vor allem wegen der möglichen Aktualität sollte es Grundlage für Publikationen in den anderen Medien sein. Mit verhältnismäßig geringem Aufwand lassen sich die WWW-Präsentation von Produktdaten so strukturieren, daß eine automatisierte Erfassung und Verarbeitung dieser Daten vereinfacht wird. So kann die Datenkonsistenz von der visuellen Präsentation in herkömmlichen Katalogen bis zur automatisch erstellten Produktdatenbank durchgängig gesichert werden. Vor dem Hintergrund der von Schnittstellenproblemen, heterogener Softwarestruktur und unzureichender Ausnutzung der Möglichkeiten der Informatik gekennzeichneten Situation im Bauwesen wird in generalisierter Ansatz mittels SGML vorgestellt. Mit einem derartigen Datenangebot werden neue, verteilte und vernetzte Anwendungen auf Grundlage derselben Produktdaten ermöglicht. KW - Bauwesen KW - Produktinformation KW - Internet Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5468 ER - TY - JOUR A1 - Semenov, Artem A1 - Melnikov, B. E. T1 - Multimodel Numerical Analysis of the Elasto-Visco-Plastic Deformation of Materials and Constructions N2 - At the present time there is no a generally accepted theory of visco-plasticity which is applicable for a wide class of materials and arbitrary paths of loading. The multimodel approach, based on the creation of hierarchical sequence of the models, is the most rational. The developed library of elasto-visco-plastic models includes both simplest and sophistic models demanding numerous experimental data. A unified general form of constitutive equations for all used elasto-visco-plastic models are presented based upon the concept of tensorial internal state variables. It permits to use unified algorithm of boundary tasks solution for different variants of material models. The developed selection criteria system generates the necessary conditions and provides the choice of the simplest variant of theory sufficient for correct problem solution. Formulation of the selection criteria system is based on peculiarities of viscoplastic materials behavior for the wide range thermomechanical loading and numerous computational experiments with structures different complexity levels. A set of effective schemes of integration stress-strain relations and non-linear finite element system solution are discussed for the considered class of material models. Application possibility of different material models is studied both for material element and for complicated structures. Application of the multimodel approach in numerical computations has demonstrated possibility of reliable prediction of stress-strain response under wide variety of combined loading. KW - Stoffgesetz KW - Elastoplastizität KW - Viskoplastizität Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5282 ER - TY - JOUR A1 - Menzel, Karsten A1 - Mahdavi, A. A1 - Hartkopf, V. A1 - Lee, S. T1 - Information technology for construction management and building performance evaluation support - a North-American perspective N2 - We provide a critical overview of the current status of computational support for construction the management and building performance evaluation in North-America. This overview is based on the research conducted in relation to the design and construction of the Intelligent Workplace (IW), Carnegie Mellon University, Pittsburgh, Pennsylvania, USA. With regard to the commercial software products in the field of construction management the following limitations can be identified: Although project planning, cost estimating and construction simulation are supported, tasks like bidding as well as site and material management have not received the same level of attention. Few project management software packages are integrated in a total design support software system. Little analysis or evaluation options are provided to support managerial decision making. Various research groups address the construction planning and scheduling, construction contracting, site layout generation as well as the integration of these three topics. Currently problems such as efficient material management and calculation of environmental and energy responsive site management are insufficiently addressed within the ongoing research projects. In the domain of building performance simulation and decision support one can notice that, the development and application of computational tools is industry driven. As a result the concerns addressed by the tools are mainly issues pertaining to the selection and sizing of systems and components rather than an integrated performance evaluation. Consequently, these programs are rarely used by building designers, especially in the early design stages, where the predictive capabilities of simulation tools could be of significant value. Although many research institutions address the necessity for the integration of performance simulation within the overall design support environments most of the practically available performance simulation tools still remain mono-dimensional and isolated. KW - Bauausführung KW - Computerunterstütztes Verfahren KW - Bauzustand Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4917 ER - TY - JOUR A1 - Kazakevitch, M. I. A1 - Kulyabko, V. V. A1 - Dubichvost, A. A. T1 - The discrete dynamic Models of the Interaction of complex - composite Structures with the dynamic Loads N2 - In the given paper the generalized formulation of the problem of computer modelling of the complex-composite structure interaction with different types of dynamic loads and effects is discussed. Here the analysis is given as for the usage of some universal computing systems for the solution of such problems. Also if is shown that the quantification of the dynamic models of the complex-composite systems with the variable structure, depending on the character and intensivity of the effects, is necessary. The different variants of the joint and the space structure element modelling are gested. It allows to consider the complex modes of the joint bending-torsional oscillations of such structures as bridges, towers, high-rise buildings. The peculiarities of the modelling and testing of some problems of the objects aerodynamics and the interaction of the frameworks constructions with shock and movable loads are considered. In this paper the examples of the complex-composite structure dynamic analysis are shown. It is achieved by means of some special methods of the input of the real inducements and loads of the exploitated analog-object into the computing model. The suggested models found a wide use both at the design of new structures and the dynamic monitoring of the exploitated structures. KW - Verbundtragwerk KW - Dynamische Belastung KW - Wechselwirkung KW - Modellierung Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5219 ER - TY - JOUR A1 - Kämmerer, Lutz A1 - Hempel, Lorenz T1 - Eine Heuristik zur Lösung von Stapelproblemen N2 - Bei der Betrachtung von Stapelproblemen ergibt sich unter anderem folgendes Problem: Ein gegebener Stapel - bestehend aus den Elementen v i der Menge V - soll an anderer Stelle in einer vorgeschriebenen, veränderten Struktur wieder aufgebaut werden. Dazu stehen Hilfsstapelplätze zur Verfügung. Die Optimierung dieses Problems hinsichtlich der Anzahl der benötigten Hilfsstapelplätze ist NP-vollständig. Es werden Erfahrungen mit einem Branch-and-Bound Algorithmus zur Lösung des Problems vorgestellt sowie ein heuristischer Algorithmus diskutiert KW - Stapelproblem KW - Heuristik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5207 ER - TY - CHAP A1 - Hohmann, Georg T1 - Von der Netzplantechnik zur Simulation - Analyse von Bauprozessen mit Hilfe von Petri-Netzen N2 - Nichtstationäre Baustellenprozesse sind dadurch gekennzeichnet, daß ihr Ablauf nicht vollständig vorhersehbar ist, sondern einer Vielzahl von Störungen unterworfen sein kann. Zur Planung und Steuerung dieser Prozesse sind daher Methoden erforderlich, welche u.a. eine große Anpassungsfähigkeit, die Darstellung paralleler Vorgänge, die Erfassung plötzlicher Störungen sowie stochastische bzw. unscharfe Parameter zulassen. Hiervon ausgehend wurden spezielle Simulationssysteme entwickelt. In der Praxis dient jedoch in den meisten Fällen das Balkendiagramm bzw. die Netzplantechnik als Planungshilfsmittel. Dabei ist der Informationsgehalt der Netzplantechnik eindeutig geringer gegenüber der Simulation. Auch fallen deterministische Berechnungen in der Regel zu optimistisch aus. Ein Wechsel von der Netzplantechnik zur Simulation ist möglich, indem zunächst Netzpläne auf der Grundlage von Petri-Netzen dargestellt werden und somit ein schrittweiser Übergang zur Simulation erfolgt. Neben der Modellbildung kommt der Bereitstellung realitätsnaher Parameter, die den Berechnungen zugrunde gelegt werden, eine große Bedeutung zu. Bei der Terminplanung sind Kenntnisse zu bestimmten äußeren Einflüssen (z. B. Niederschlag) oft nur in unscharfer Weise vorhanden. Hier bietet sich der Einsatz von Fuzzy-Verfahren an. Mit ihrer Hilfe lassen sich unscharfe Faktoren erfassen und in die Planung einbeziehen. Sowohl zur Darstellung von Petri-Netzen als zur Berechnung (Simulation) auf deren Grundlage sowie zur Aufbereitung der Daten mittels Fuzzy-Verfahren liegen entsprechende Rechenprogramme vor. KW - Bauablauf KW - Prozessmodell KW - Netzplantechnik KW - Petri-Netz Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4511 ER - TY - CHAP A1 - Flemming, Ulrich A1 - Snyder, J. T1 - Building and Databases: the SEED Experience N2 - We describe the database requirements of SEED (Software Environment to Support the Early Phases in Building Design). The requirements are typical for a database that intends to support a heterogeneous design support environment consisting of independent software modules with diverse internal design models, requirements not met by any commercial database system. The design and implementation of this database is an integral part of the overall software engineering effort. We describe the SEED approach that integrates external and in-house software based on a shared information model specified in the modeling language SPROUT, which allows for the specification of domains, and classes, relationship types and their behavior, and multiple classifications. The SPROUT run-time system organizes and coordinates the communication between the software modules and the database KW - Bauentwurf KW - Datenbank Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4151 ER - TY - JOUR A1 - Krebs, F. A1 - Brück, E. T1 - 3D-Computergrafik und -animation als Instrument der Visualisierung im Bereich Entwurf und Denkmalpflege N2 - Seit mehreren Jahren wird im Fachbereich Gestaltung, Studiengang Innenarchitektur 3D-Computergrafik und -animation in Lehrveranstaltungen ausgebildet und in Projekt- und Diplomarbeiten als Darstellungsmedium angewandt. Eine besondere Herausforderung stellen dabei die 3D-Visualisierungen von historischen Gebäuden dar. Mit den beiden nachfolgenden Beispielen soll der Einsatz und die curricularen Verknüpfung der CA-Technologie mit Studienarbeiten und Projekten zum Thema >Denkmalpflege< aufgezeigt werden. Rekonstruktion und Visualisierung des ehemaligen >Jagdschlosses Platte< bei Wiesbaden. Mit Unterstützung einer Kunsthistorikerin wurde in einer Studienarbeit das im Krieg zerstörte ehemalige Jagdschloß im Computer nachgebildet. Neben der Darstellung des Gebäudeäußeren und des zentralen Innenbereiches wurde eine Animation über die Triangulierung der klassizistischen Geometrie erstellt. Umnutzung historischer Bausubstanz am Beispiel der ehemaligen Klostersanlage >Schiffenberg< bei Gießen. Im Rahmen einer Projektarbeit wurden mehrer Konzepte entwickelt, Entwürfe erstellt und mittels Computeranimationen öffentlich präsentiert. In Kooperation mit dem Studiengang Fernsehtechnik (FH-Wiesbaden) wurde von zwei Studenten eine Videodokumentation über den gesamten Projektverlauf erstellt. Neben dem Aufzeigen der Arbeitsprozesse und dem Vorstellen des Lehrkonzeptes für die curriculare Einbindung der CA-Technologie werden aktuelle Studienergebnisse anhand von Videoprojektionen vorgestellt. KW - Architektur KW - Visualisierung KW - Dreidimensionales Modell KW - Computergraphik Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-5235 ER - TY - JOUR A1 - Werner, F. A1 - Eshete, T. T1 - Grundlagen zur Methodik der Verschneidung stahlbautypischer Körper in einem CAD-System N2 - Der Effekt des praktischen Einsatzes von CAD-Systemen im Stahlbau erschöpft sich heute weitgehend in einer Verbesserung der Qualität der Planungsunterlagen und in der Verkürzung der Bearbeitungszeiten. Dabei ist bei schwierigen individuellen Konstruktionen die Einsparung an Arbeitszeit oft nicht sehr markant gegenüber einer traditionellen Arbeitsweise. Die dreidimensionale Erfassung, Speicherung und Verarbeitung von Konstruktionsdaten im Rechner verlangt neben größeren Rechenleistungen neue Verfahren für die Behandlung dieser Daten. Die Möglichkeiten der Automatisierung stahlbautypischer Produktionsvorgänge und einer variablen, computergestützten Planung erfordern wissenschaftlich-technische Betrachtungen des Gesamtproblems. Ausgehend von den Anforderungen des Stahlbaus wird ein neues dreidimensionales Volumenmodell für den rechnergestützten Entwurf und die Konstruktion erarbeitet. Es werden grundlegende Methoden zur Problembehandlung aufgezeigt. Die Methodik basiert im wesentlichen auf der Methode der Inzidenz-Matrizen, um die Beziehungen zwischen topologischen und geometrischen Informationen eines Körpers darzustellen. Die Ermittlung der lokalen Mannigfaltigkeiten wird mit dem Euler-Polyedersatz verglichen und an Beispielen demonstriert. Eine neue Methode zur Ermittlung der lokalen Mannigfaltigkeiten wird dargestellt. Stahlbauspezifische Konstruktionen werden erzeugt und ihre Gestalt nach Anforderungen verändert. Im besonderen werden stahlbauspezifische Ausklinkungen und Verschneidungen erarbeitet und an Beispielen präsentiert. KW - Stahlbau KW - CAD KW - Dreidimensionales Modell Y1 - 1997 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-4601 ER -