TY - INPR A1 - Abbas, Tajammal A1 - Kavrakov, Igor A1 - Morgenthal, Guido A1 - Lahmer, Tom T1 - Prediction of aeroelastic response of bridge decks using artificial neural networks N2 - The assessment of wind-induced vibrations is considered vital for the design of long-span bridges. The aim of this research is to develop a methodological framework for robust and efficient prediction strategies for complex aerodynamic phenomena using hybrid models that employ numerical analyses as well as meta-models. Here, an approach to predict motion-induced aerodynamic forces is developed using artificial neural network (ANN). The ANN is implemented in the classical formulation and trained with a comprehensive dataset which is obtained from computational fluid dynamics forced vibration simulations. The input to the ANN is the response time histories of a bridge section, whereas the output is the motion-induced forces. The developed ANN has been tested for training and test data of different cross section geometries which provide promising predictions. The prediction is also performed for an ambient response input with multiple frequencies. Moreover, the trained ANN for aerodynamic forcing is coupled with the structural model to perform fully-coupled fluid--structure interaction analysis to determine the aeroelastic instability limit. The sensitivity of the ANN parameters to the model prediction quality and the efficiency has also been highlighted. The proposed methodology has wide application in the analysis and design of long-span bridges. KW - Aerodynamik KW - Artificial neural network KW - Ingenieurwissenschaften KW - Bridge KW - Bridge aerodynamics KW - Aerodynamic derivatives KW - Motion-induced forces KW - Bridges Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200225-40974 N1 - This is the pre-peer reviewed version of the following article: https://www.sciencedirect.com/science/article/abs/pii/S0045794920300018?via%3Dihub, https://doi.org/10.1016/j.compstruc.2020.106198 ER - TY - THES A1 - Abeltshauser, Rainer T1 - Identification and separation of physical effects of coupled systems by using defined model abstractions N2 - The thesis investigates at the computer aided simulation process for operational vibration analysis of complex coupled systems. As part of the internal methods project “Absolute Values” of the BMW Group, the thesis deals with the analysis of the structural dynamic interactions and excitation interactions. The overarching aim of the methods project is to predict the operational vibrations of engines. Simulations are usually used to analyze technical aspects (e. g. operational vibrations, strength, ...) of single components in the industrial development. The boundary conditions of submodels are mostly based on experiences. So the interactions with neighboring components and systems are neglected. To get physically more realistic results but still efficient simulations, this work wants to support the engineer during the preprocessing phase by useful criteria. At first suitable abstraction levels based on the existing literature are defined to identify structural dynamic interactions and excitation interactions of coupled systems. So it is possible to separate different effects of the coupled subsystems. On this basis, criteria are derived to assess the influence of interactions between the considered systems. These criteria can be used during the preprocessing phase and help the engineer to build up efficient models with respect to the interactions with neighboring systems. The method was developed by using several models with different complexity levels. Furthermore, the method is proved for the application in the industrial environment by using the example of a current combustion engine. T2 - Identifikation und Separation physikalischer Effekte von gekoppelten Systemen mittels definierter Modellabstraktionen T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2017,1 KW - Strukturdynamik KW - Wechselwirkung KW - Schwingung KW - Berechnung KW - Numerische Berechnung KW - Modellbildung KW - Schwingungsanalyse KW - Simulationsprozess Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28600 ER - TY - THES A1 - Achenbach, Marcus T1 - Weiterentwicklung der Zonenmethode für den Nachweis der Feuerwiderstandsdauer von rechteckigen Stahlbetondruckgliedern N2 - Die Zonenmethode nach Hertz ist ein vereinfachtes Verfahren zur Heißbemessung von Stahlbetonbauteilen. Um eine händische Bemessung zu ermöglichen, werden daher verschiedene Annahmen und Vereinfachungen getroffen. Insbesondere werden die thermischen Dehnungen vernachlässigt und das mechanische Verhalten durch einen verkleinerten Querschnitt mit konstanten Stoffeigenschaften beschrieben. Ziel der vorliegenden Arbeit ist, dieses vereinfachte Verfahren in ein nichtlineares Verfahren zur Heißbemessung von Stahlbetondruckgliedern bei Brandbeanspruchung durch die Einheits-Temperaturzeitkurve zu überführen. Dazu werden die wesentlichen Annahmen der Zonenmethode überprüft und ein Vorschlag zur Weiterentwicklung vorgestellt. Dieser beruht im Wesentlichen auf der Modellierung der druckbeanspruchten Bewehrung. Diese weiterentwickelte Zonenmethode wird durch die Nachrechnung von Laborversuchen validiert und das Sicherheitsniveau durch eine vollprobabilistische Analyse und den Vergleich mit dem allgemeinen Verfahren bestimmt. T3 - Schriftenreihe des Instituts für Konstruktiven Ingenieurbau - 33 KW - Bautechnik KW - Stahlbeton KW - Druckglied KW - Brandschutz KW - Probabilistik KW - Monte-Carlo-Simulation Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20190119-38484 SN - 978-3-95773-264-4 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Ailland, Karin T1 - Ereignisbasierte Abbildung von Bau-Ist-Zuständen N2 - Der Komplexität einer großen Baumaßnahme steht meist ein relativ unpräzises Termincontrolling gegenüber. Die Gründe dafür liegen in unzureichenden Baufortschrittsinformationen und der Schwierigkeit, eine geeignete Steuerungsmaßnahme auszuwählen. In der Folge kommt es häufig zu Terminverzügen und Mehrkosten. Ziel der Arbeit war es, die realen Bau-Ist-Zustände eines Bauprojektes so genau zu erfassen, dass es möglich wird, täglich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes zu schaffen und mit Hilfe eines Simulationswerkzeuges nachzubilden. Zu diesem Zweck sollte ein Erfassungskonzept ausgearbeitet werden, mit dessen Hilfe unter Verwendung von Erfassungstechniken aussagekräftige sowie belastbare Daten zu einer auf die Anforderungen der Simulation abgestimmten Datenbasis zusammengeführt werden. Um der Zielstellung gerecht zu werden, wurde anhand eines Beispiels ein Prozessmodell aufgebaut und definiert, welche Informationen zum Aufbau eines Simulationsmodells, das die reaktive Ablaufplanung unterstützt, erfasst werden müssen. Die einzelnen Prozessgrößen wurden detailliert beschrieben und die Erfassungsgrößen daraus abgeleitet. Weiterhin wurden Aussagen zur Prozessstrukturierung erarbeitet. Somit wurden Informationsstützstellen definiert. Es wurden Methoden zur Erfassung des Bau-Ist-Zustandes hinsichtlich ihrer Eignung sowie Anwendungsmöglichkeiten analysiert und ausgewählte Anwendungsbeispiele für RFID, Barcodes und Bautagebücher dargestellt. Außerdem wurde betrachtet, welche Daten der baustelleneigenen Bauablaufdokumentation zur Belegung der Informationsstützstellen genutzt werden können. Diese Betrachtung stellte Dokumente in den Fokus, welche aufgrund von Vorschriften oder Vertragsbedingungen ohnehin auf Baustellen erfasst werden müssen. Schließlich wurden die vorangegangenen Betrachtungen hinsichtlich der Erfassungsgrößen und der Erfassungsmethoden in einem Erfassungskonzept zusammengeführt und eine geeignete Kombination von Erfassungsmethoden entwickelt. Der Baufortschritt soll anhand der Beschreibung, welchen Status die einzelnen Vorgänge angenommen haben, mit Hilfe eines digitalen Bautagebuchs erfasst werden. Die Randbedingungen, wie die Verfügbarkeit von Personal-, Material- und Geräteressourcen, werden mit Hilfe von RFID-Tags identifiziert, auf denen alle weiteren benötigten Informationen hinterlegt sind. Informationen über Ressourcen, welche geplante Termine wiedergeben, müssen ebenfalls im digitalen Bautagebuch hinterlegt und aktuell gehalten werden. Traditionelle Lieferscheine in Papierform müssen durch digitale Lieferscheine ersetzt werden. Abgeschlossen wurde die Ausarbeitung des Erfassungskonzeptes durch Ansätze, mit deren Hilfe der Erfassungsaufwand reduziert werden kann. Zu diesem Zweck wurde eine hierarchische Ordnung des Erfassungskonzeptes eingeführt. Im Ergebnis ist somit ein Erfassungskonzept entstanden, mit dessen Hilfe die realen Bau-Ist-Zustände einer Baumaßnahme so genau erfasst werden können, dass täglich ein zutreffendes Abbild des Baufortschrittes und der Randbedingungen des Bauablaufes in einer Simulations¬umgebung generiert werden kann. Die Erfassungskonzeption liefert eine Datenbasis, die auf die Anforderungen der Simulation abgestimmt ist. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 29 KW - Simulation KW - Bauprozess KW - ereignisbasiert KW - Bau-Ist Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20131029-20651 SN - 978-3-86068-508-2 PB - Verlag der Bauhaus-Universität Weimar CY - Weimar ER - TY - JFULL A1 - Ainio, Anna A1 - Bartetzky, Arnold A1 - Győrffy, Rachel A1 - Islam, Naslima A1 - Khvadagiani, Irakli A1 - Kibel, Jochen A1 - Landau-Donnelly, Friederike A1 - Leko, Kristina A1 - Lenz, Patricia A1 - Onuoha, Nnenna A1 - Rathjen, Lukas A1 - Reinsch, Natalie A1 - Rykov, Anatol A1 - Tajeri, Niloufar A1 - Ullmanová, Klára ED - Dinççağ Kahveci, Ayşegül ED - Hajdu, Marcell ED - Höhne, Wolfram ED - Jesse, Darja ED - Karpf, Michael ED - Torres Ruiz, Marta T1 - Censored? Conflicted Concepts of Cultural Heritage N2 - Those who ask how social entities relate to the past, enter a field defined by competing interpretations and contested practices of a collectively shared heritage. Dissent and conflict among heritage communities represent productive moments in the negotiation of these varying constructs of the past, identities, and heritage. At the same time, they lead to omissions, the overwriting and amendment of existing constructs. A closer look at all that is suppressed, excluded or rejected opens up new perspectives: It reveals how social groups are formed through public disputes upon the material foundations of heritage constructs. Taking the concept of censorship, the volume engages with the exclusionary and inclusionary mechanisms that underlie the construction of heritage and thus social identities. Censorship is understood here as a discursive strategy in public debates. In current debates, allegations of censorship surface primarily in cases where the handling of a certain heritage constructs is subjected to critical evaluation, or on the contrary, needs to be protected from criticism or even destruction. The authors trace the connection between heritage and identity and show that identity constructs are not only manifested within heritage but are actively negotiated through it. T3 - Schriftenreihe des DFG-Graduiertenkollegs 2227 "Identität und Erbe" - 4 KW - Kulturerbe KW - Denkmalpflege KW - Architektur KW - Zensur KW - Heritage Studies KW - Cancel Culture KW - Censorship KW - Kulturgeschichte Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230213-49276 SN - 978-3-95773-304-7 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Alabassy, Mohamed Said Helmy T1 - Automated Approach for Building Information Modelling of Crack Damages via Image Segmentation and Image-based 3D Reconstruction N2 - As machine vision-based inspection methods in the field of Structural Health Monitoring (SHM) continue to advance, the need for integrating resulting inspection and maintenance data into a centralised building information model for structures notably grows. Consequently, the modelling of found damages based on those images in a streamlined automated manner becomes increasingly important, not just for saving time and money spent on updating the model to include the latest information gathered through each inspection, but also to easily visualise them, provide all stakeholders involved with a comprehensive digital representation containing all the necessary information to fully understand the structure’s current condition, keep track of any progressing deterioration, estimate the reduced load bearing capacity of the damaged element in the model or simulate the propagation of cracks to make well-informed decisions interactively and facilitate maintenance actions that optimally extend the service life of the structure. Though significant progress has been recently made in information modelling of damages, the current devised methods for the geometrical modelling approach are cumbersome and time consuming to implement in a full-scale model. For crack damages, an approach for a feasible automated image-based modelling is proposed utilising neural networks, classical computer vision and computational geometry techniques with the aim of creating valid shapes to be introduced into the information model, including related semantic properties and attributes from inspection data (e.g., width, depth, length, date, etc.). The creation of such models opens the door for further possible uses ranging from more accurate structural analysis possibilities to simulation of damage propagation in model elements, estimating deterioration rates and allows for better documentation, data sharing, and realistic visualisation of damages in a 3D model. KW - Building Information Modeling KW - BIM KW - IFC KW - Damage Information Modelling KW - Cracks Segmentation KW - Cracks 3D Modelling KW - Netscape Internet Foundation Classes Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230818-64162 ER - TY - JOUR A1 - Alalade, Muyiwa A1 - Reichert, Ina A1 - Köhn, Daniel A1 - Wuttke, Frank A1 - Lahmer, Tom ED - Qu, Chunxu ED - Gao, Chunxu ED - Zhang, Rui ED - Jia, Ziguang ED - Li, Jiaxiang T1 - A Cyclic Multi-Stage Implementation of the Full-Waveform Inversion for the Identification of Anomalies in Dams JF - Infrastructures N2 - For the safe and efficient operation of dams, frequent monitoring and maintenance are required. These are usually expensive, time consuming, and cumbersome. To alleviate these issues, we propose applying a wave-based scheme for the location and quantification of damages in dams. To obtain high-resolution “interpretable” images of the damaged regions, we drew inspiration from non-linear full-multigrid methods for inverse problems and applied a new cyclic multi-stage full-waveform inversion (FWI) scheme. Our approach is less susceptible to the stability issues faced by the standard FWI scheme when dealing with ill-posed problems. In this paper, we first selected an optimal acquisition setup and then applied synthetic data to demonstrate the capability of our approach in identifying a series of anomalies in dams by a mixture of reflection and transmission tomography. The results had sufficient robustness, showing the prospects of application in the field of non-destructive testing of dams. KW - Damm KW - Defekt KW - inverse analysis KW - damage identification KW - full-waveform inversion KW - dams KW - wave propagation KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221201-48396 UR - https://www.mdpi.com/2412-3811/7/12/161 VL - 2022 IS - Volume 7, issue 12, article 161 PB - MDPI CY - Basel ER - TY - THES A1 - Alexander, Anne T1 - Quantitative Erfassung von Risiken und Simulation ihrer Auswirkungen auf den Verlauf eines Bauprojektes N2 - Das Bauwesen hat sich in den letzten Jahren durch die Globalisierung des Marktes verbunden mit einer verstärkten Nutzung moderner Technologien stark gewandelt. Die Planung und die Durchführung von Bauvorhaben werden zunehmend komplexer und sind mit erhöhten Risiken verbunden. Geld- und Zeitressourcen werden bei einem immer härter werdenden Konkurrenzkampf knapper. Das Projektmanagement stellt Lösungsansätze bereit, um Bauvorhaben auch unter erschwerten Bedingungen und erhöhten Risiken erfolgreich zum Abschluss zu bringen. Dabei hat ein systematisches Risikomanagement beginnend bei der Projektentwicklung bis zum Projektabschluss eine für den Projekterfolg entscheidende Bedeutung. Ziel der Arbeit ist es, eine quantitative Risikoerfassung für Projektmanager als professionelle Bauherrenvertretung und die Simulation der Risikoauswirkungen auf den Verlauf eines Projektes während der Planungs- und Bauphase zu ermöglichen. Mit Hilfe eines abstrakten Modells soll eine differenzierte, praxisnahe Simulation durchführbar sein, die die verschiedenen Arten der Leistungs- und Kostenentstehung widerspiegelt. Parallel dazu soll die Beschreibung von Risiken so abstrahiert werden, dass beliebige Risiken quantitativ erfassbar und anschließend ihre Auswirkungen inklusive mögliche Gegenmaßnahmen in das Modell integrierbar sind. Anhand zweier Beispiele werden die unterschiedlichen Einsatzmöglichkeiten der quantitativen Erfassung von Projektrisiken und der anschließenden Simulation ihrer Auswirkungen aufgezeigt. Bei dem ersten Beispiel, einem realen, bereits abgeschlossenen Schieneninfrastrukturprojekt, wird die Wirksamkeit einer vorbeugenden Maßnahme gegen ein Projektrisiko untersucht. Im zweiten Beispiel wird ein Planspielansatz zur praxisnahen Aus- und Weiterbildung von Projektmanagern entwickelt. Inhalt des Planspiels ist die Planung und Errichtung eines privatfinanzierten, öffentlichen Repräsentationsbaus mit teilweiser Fremdnutzung. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 28 KW - Risiko KW - Projektmanagement KW - Planspiel KW - Simulationsmodell KW - Risikoerfassung KW - Projektmanagement KW - Simulationsmodell KW - Kosten- und Leistungsentwicklung KW - Planspiel Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130927-20514 ER - TY - CHAP A1 - Alfen, Hans Wilhelm A1 - Kiesewetter, Frank A1 - Schwanck, Anke A1 - Frank, Michael A1 - Fischer, Katrin A1 - Faust, Helmut A1 - Littwin, Frank A1 - Böde, Klaus ED - Alfen, Hans Wilhelm T1 - Workshop “PPP – Eignung und Vorgehensweise bei Hochschulprojekten“ N2 - Am 4. Oktober 2007 fand im Rahmen des Forschungsprojektes „Lebenszyklusorientiertes Management öffentlicher Liegenschaften am Beispiel von Hochschulen und Wissenschaftseinrichtungen“ in Weimar der Workshop „PPP-Eignung und Vorgehensweise bei Hochschulprojekten“ mit über 60 Vertretern von Hochschulen, Studentenwerken, Ministerien, PPP Task Forces und Liegenschaftsbetrieben der Länder statt. Im Beitrag erfolgt die Zusammenstellung der Präsentationen der Referenten. KW - Public Private Partnership KW - Hochschule KW - Wissenschaftliche Einrichtung KW - Forschungseinrichtung KW - Öffentlicher Sektor KW - Lebenszyklusorientiertes Management KW - Immobilienlebenszyklus KW - Öffentliche Liegenschaften Y1 - 2007 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130805-19996 UR - http://www.uni-weimar.de/cms/fileadmin/bauing/baubwl/Oeffentlich_zugaengliche__Dokumente/Forschung/LEMA_2006-08/Workshop_PPP_bei_Hochschulen.pdf SP - 1 EP - 90 ER - TY - THES A1 - Alkam, Feras T1 - Vibration-based Monitoring of Concrete Catenary Poles using Bayesian Inference N2 - This work presents a robust status monitoring approach for detecting damage in cantilever structures based on logistic functions. Also, a stochastic damage identification approach based on changes of eigenfrequencies is proposed. The proposed algorithms are verified using catenary poles of electrified railways track. The proposed damage features overcome the limitation of frequency-based damage identification methods available in the literature, which are valid to detect damage in structures to Level 1 only. Changes in eigenfrequencies of cantilever structures are enough to identify possible local damage at Level 3, i.e., to cover damage detection, localization, and quantification. The proposed algorithms identified the damage with relatively small errors, even at a high noise level. KW - Parameteridentifikation KW - Bayesian Inference, Uncertainty Quantification KW - Inverse Problems KW - Damage Identification KW - Concrete catenary pole KW - SHM KW - Inverse Probleme KW - Bayes’schen Inferenz KW - Unschärfequantifizierung KW - Schadenerkennung KW - Oberleitungsmasten Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210526-44338 UR - https://asw-verlage.de/katalog/vibration_based_monitoring_of_co-2363.html VL - 2021 PB - Bauhaus-Universitätsverlag CY - Weimar ER - TY - THES A1 - Amiri, Fatemeh T1 - Computational modelling of fracture with local maximum entropy approximations N2 - The key objective of this research is to study fracture with a meshfree method, local maximum entropy approximations, and model fracture in thin shell structures with complex geometry and topology. This topic is of high relevance for real-world applications, for example in the automotive industry and in aerospace engineering. The shell structure can be described efficiently by meshless methods which are capable of describing complex shapes as a collection of points instead of a structured mesh. In order to find the appropriate numerical method to achieve this goal, the first part of the work was development of a method based on local maximum entropy (LME) shape functions together with enrichment functions used in partition of unity methods to discretize problems in linear elastic fracture mechanics. We obtain improved accuracy relative to the standard extended finite element method (XFEM) at a comparable computational cost. In addition, we keep the advantages of the LME shape functions,such as smoothness and non-negativity. We show numerically that optimal convergence (same as in FEM) for energy norm and stress intensity factors can be obtained through the use of geometric (fixed area) enrichment with no special treatment of the nodes near the crack such as blending or shifting. As extension of this method to three dimensional problems and complex thin shell structures with arbitrary crack growth is cumbersome, we developed a phase field model for fracture using LME. Phase field models provide a powerful tool to tackle moving interface problems, and have been extensively used in physics and materials science. Phase methods are gaining popularity in a wide set of applications in applied science and engineering, recently a second order phase field approximation for brittle fracture has gathered significant interest in computational fracture such that sharp cracks discontinuities are modeled by a diffusive crack. By minimizing the system energy with respect to the mechanical displacements and the phase-field, subject to an irreversibility condition to avoid crack healing, this model can describe crack nucleation, propagation, branching and merging. One of the main advantages of the phase field modeling of fractures is the unified treatment of the interfacial tracking and mechanics, which potentially leads to simple, robust, scalable computer codes applicable to complex systems. In other words, this approximation reduces considerably the implementation complexity because the numerical tracking of the fracture is not needed, at the expense of a high computational cost. We present a fourth-order phase field model for fracture based on local maximum entropy (LME) approximations. The higher order continuity of the meshfree LME approximation allows to directly solve the fourth-order phase field equations without splitting the fourth-order differential equation into two second order differential equations. Notably, in contrast to previous discretizations that use at least a quadratic basis, only linear completeness is needed in the LME approximation. We show that the crack surface can be captured more accurately in the fourth-order model than the second-order model. Furthermore, less nodes are needed for the fourth-order model to resolve the crack path. Finally, we demonstrate the performance of the proposed meshfree fourth order phase-field formulation for 5 representative numerical examples. Computational results will be compared to analytical solutions within linear elastic fracture mechanics and experimental data for three-dimensional crack propagation. In the last part of this research, we present a phase-field model for fracture in Kirchoff-Love thin shells using the local maximum-entropy (LME) meshfree method. Since the crack is a natural outcome of the analysis it does not require an explicit representation and tracking, which is advantageous over techniques as the extended finite element method that requires tracking of the crack paths. The geometric description of the shell is based on statistical learning techniques that allow dealing with general point set surfaces avoiding a global parametrization, which can be applied to tackle surfaces of complex geometry and topology. We show the flexibility and robustness of the present methodology for two examples: plate in tension and a set of open connected pipes. KW - Fracture mechanics KW - Local maximum entropy approximants KW - PU Enrichment method KW - Phase-field model KW - Thin shell KW - Kirchoff--love theory Y1 - 2016 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160719-26310 ER - TY - JOUR A1 - Arnold, Robert A1 - Kraus, Matthias ED - Pham, Duc T1 - On the nonstationary identification of climate-influenced loads for the semi-probabilistic approach using measured and projected data JF - Cogent Engineering N2 - A safe and economic structural design based on the semi-probabilistic concept requires statistically representative safety elements, such as characteristic values, design values, and partial safety factors. Regarding climate loads, the safety levels of current design codes strongly reflect experiences based on former measurements and investigations assuming stationary conditions, i.e. involving constant frequencies and intensities. However, due to climate change, occurrence of corresponding extreme weather events is expected to alter in the future influencing the reliability and safety of structures and their components. Based on established approaches, a systematically refined data-driven methodology for the determination of design parameters considering nonstationarity as well as standardized targets of structural reliability or safety, respectively, is therefore proposed. The presented procedure picks up fundamentals of European standardization and extends them with respect to nonstationarity by applying a shifting time window method. Taking projected snow loads into account, the application of the method is exemplarily demonstrated and various influencing parameters are discussed. KW - Reliabilität KW - Extreme value distribution KW - climate loads KW - nonstationarity KW - semi-probabilistic concept KW - First Order Reliability Method KW - OA-Publikationsfonds2022 Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20221117-47363 UR - https://doi.org/10.1080/23311916.2022.2143061 VL - 2022 IS - Volume 9, issue 1, article 2143061 SP - 1 EP - 26 PB - Taylor & Francis CY - London ER - TY - RPRT A1 - Asslan, Milad T1 - Factors Influencing Small-Strain Stiffness of soils and its Determination N2 - This term paper presents a literature review and discusses concepts of the following point: 1- Factors affecting small-strain stiffness in soil; 2- Methods to determine small-strain shear stiffness in laboratory and in-situ; 3- Brief introduction into wave propagation and 4- Bender elements technique to determine shear wave velocity in soil. KW - Soil KW - Shear modulus KW - Bender elements Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120402-15870 ER - TY - THES A1 - Asslan, Milad T1 - An Experimental Study on the Initial Shear Stiffness in Granular Material under Controlled Multi-Phase Laboratory Conditions N2 - The initial shear modulus, Gmax, of soil is an important parameter for a variety of geotechnical design applications. This modulus is typically associated with shear strain levels about 5*10^-3% and below. The critical role of soil stiffness at small-strains in the design and analysis of geotechnical infrastructure is now widely accepted. Gmax is a key parameter in small-strain dynamic analyses such as those to predict soil behavior or soil-structure interaction during earthquake, explosions, machine or traffic vibration where it is necessary to know how the shear modulus degrades from its small-strain value as the level of shear strain increases. Gmax can be equally important for small-strain cyclic situations such as those caused by wind or wave loading and for small-strain static situations as well. Gmax may also be used as an indirect indication of various soil parameters, as it, in many cases, correlates well to other soil properties such as density and sample disturbance. In recent years, a technique using bender elements was developed to investigate the small-strain shear modulus Gmax. The objective of this thesis is to study the initial shear stiffness for various sands with different void ratios, densities, grain size distribution under dry and saturated conditions, then to compare empirical equations to predict Gmax and results from other testing devices with results of bender elements from this study. KW - Soil KW - Shear modulus KW - Shear wave KW - Soil dynamics KW - Bender elements Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20120402-15842 ER - TY - JFULL A1 - Bee, Julia A1 - Klemstein, Franziska A1 - Hallmann, Lilli A1 - Noeske, Jannik A1 - Bachrach Barzilai, Yael A1 - Bauche, Manuela A1 - Beck, Erik A1 - Logemann, Daniel A1 - Marshall, Danna A1 - Paulus, Jörg A1 - Schlüter, Dorothee A1 - Schubert-Lehnhardt, Viola A1 - Schwoch, Rebecca A1 - Strähle, Volker A1 - Stubenvoll, Kerstin A1 - Victor, Kristin A1 - Wagner, Jens-Christian A1 - Welch Guerra, Max ED - Bee, Julia ED - Hallmann, Lilli ED - Klemstein, Franziska ED - Noeske, Jannik T1 - Auf dem Weg zum Erinnerungsort - das Gebäude der NS-Medizinbürokratie in Weimar N2 - Die Bauhausstraße 11 war in der NS-Zeit Sitz von zahlreichen Institutionen der Gesundheitspolitik. Jetzt ist das Gebäude zum Gegenstand eines Forschungsprojektes geworden, in Zukunft wird auch vor Ort an seine Einbindung in nationalsozialistische Verbrechen erinnert. Dieses Buch dokumentiert und reflektiert die Erinnerungsarbeit auf dem Campus der Bauhaus-Universität Weimar und darüber hinaus. Anhand der interdisziplinären Beiträge wird das Gebäude in der heutigen Bauhausstraße 11 räumlich in Weimar und Thüringen, erinnerungspolitisch aber in einer seit Jahrzehnten erkämpften Landschaft des Gedenkens an nationalsozialistische Verbrechen verortet. KW - Kollektives Gedächtnis KW - Judenvernichtung KW - Nationalsozialismus KW - Gesundheitspolitik KW - Euthanasie KW - Erinnerungskultur KW - Thüringen im Nationalsozialismus KW - Gesundheitsverwaltung im Nationalsozialismus KW - NS-Architektur KW - Denkmalschutz Y1 - 2024 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20231012-64617 ER - TY - THES A1 - Bendalla, Abdulmagid Sedig Khalafallah T1 - Nonlinear Numerical Modelling of Cable Elements in Bridges for Dynamic Analysis N2 - Identifying cable force with vibration-based methods has become widely used in engineering practice due to simplicity of application. The string taut theory provides a simple definition of the relationship between natural frequencies and the tension force of a cable. However, this theory assumes a perfectly flexible non-sagging cable pinned at its ends. These assumptions do not reflect all cases, especially when the cable is short, under low tension forces or the supports are partially flexible. Extradosed bridges, which are distinguished from cable-stayed bridges by their low pylon height, have shorter cables. Therefore the application of the conventional string taut theory to identify cable forces on extradosed bridge cables might be inadequate to identify cable forces. In this work, numerical modelling of an extradosed bridge cable saddled on a circular deviator at pylon is conducted. The model is validated with the catenary analytical solution and its static and dynamic behaviours are studied. The effect of a saddle support is found to positively affect the cable stiffness by geometric means; longer saddle radius increases the cable stiffness by suppressing the deformations near the saddle. Further, accounting the effects of bending stiffness in the numerical model by using beam elements show considerable deviation from models with truss elements (i.e. zero bending stiffness). This deviation is manifested when comparing the static and dynamic properties. This motivates a more thorough study of bending stiffness effects on short cables. Bending stiffness effects are studied using two rods connected with several springs along their length. Under bending moments, the springs resist the rods' relative axial displacement by the springs' transverse component. This concept is used to identify bending stiffness values by utilizing the parallel axis theorem to quantify ratios of the second moment of area. These ratios are calculated based on the setup of the springs (e.g. number of springs per unit length, transverse stiffness, etc...). The numerical model based on this concept agrees well with the theoretical values computed using upper and lower bounds of the parallel axis theorem. The proposed concept of quantifying ratios of the second moment of area using springs as connection between cable rods is applied on an actual extradosed bridge geometry. The model is examined by comparison to the previously validated global numerical model. The two models showed good correlation under various changing parameters. This allowed further study of the effects of stick/slip behaviour between cable rods on an actual bridge geometry. KW - Kabel KW - Nonlinear Cable Analysis KW - Bending Stiffness of cable elements KW - Biegesteifigkeit Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20191007-39940 ER - TY - THES A1 - Berhe, Asgedom Haile T1 - Mitigating Risks of Corruption in Construction: A theoretical rationale for BIM adoption in Ethiopia N2 - This PhD thesis sets out to investigate the potentials of Building Information Modeling (BIM) to mitigate risks of corruption in the Ethiopian public construction sector. The wide-ranging capabilities and promises of BIM have led to the strong perception among researchers and practitioners that it is an indispensable technology. Consequently, it has become the frequent subject of science and research. Meanwhile, many countries, especially the developed ones, have committed themselves to applying the technology extensively. Increasing productivity is the most common and frequently cited reason for that. However, both technology developers and adopters are oblivious to the potentials of BIM in addressing critical challenges in the construction sector, such as corruption. This particularly would be significant in developing countries like Ethiopia, where its problems and effects are acute. Studies reveal that bribery and corruption have long pervaded the construction industry worldwide. The complex and fragmented nature of the sector provides an environment for corruption. The Ethiopian construction sector is not immune from this epidemic reality. In fact, it is regarded as one of the most vulnerable sectors owing to varying socio-economic and political factors. Since 2015, Ethiopia has started adopting BIM, yet without clear goals and strategies. As a result, the potential of BIM for combating concrete problems of the sector remains untapped. To this end, this dissertation does pioneering work by showing how collaboration and coordination features of the technology contribute to minimizing the opportunities for corruption. Tracing loopholes, otherwise, would remain complex and ineffective in the traditional documentation processes. Proceeding from this anticipation, this thesis brings up two primary questions: what are areas and risks of corruption in case of the Ethiopian public construction projects; and how could BIM be leveraged to mitigate these risks? To tackle these and other secondary questions, the research employs a mixed-method approach. The selected main research strategies are Survey, Grounded Theory (GT) and Archival Study. First, the author disseminates an online questionnaire among Ethiopian construction engineering professionals to pinpoint areas of vulnerability to corruption. 155 responses are compiled and scrutinized quantitatively. Then, a semi-structured in-depth interview is conducted with 20 senior professionals, primarily to comprehend opportunities for and risks of corruption in those identified highly vulnerable project stages and decision points. At the same time, open interviews (consultations) are held with 14 informants to be aware of state of the construction documentation, BIM and loopholes for corruption in the country. Consequently, these qualitative data are analyzed utilizing the principles of GT, heat/risk mapping and Social Network Analysis (SNA). The risk mapping assists the researcher in the course of prioritizing corruption risks; whilst through SNA, methodically, it is feasible to identify key actors/stakeholders in the corruption venture. Based on the generated research data, the author constructs a [substantive] grounded theory around the elements of corruption in the Ethiopian public construction sector. This theory, later, guides the subsequent strategic proposition of BIM. Finally, 85 public construction related cases are also analyzed systematically to substantiate and confirm previous findings. By ways of these multiple research endeavors that is based, first and foremost, on the triangulation of qualitative and quantitative data analysis, the author conveys a number of key findings. First, estimations, tender document preparation and evaluation, construction material as well as quality control and additional work orders are found to be the most vulnerable stages in the design, tendering and construction phases respectively. Second, middle management personnel of contractors and clients, aided by brokers, play most critical roles in corrupt transactions within the prevalent corruption network. Third, grand corruption persists in the sector, attributed to the fact that top management and higher officials entertain their overriding power, supported by the lack of project audits and accountability. Contrarily, individuals at operation level utilize intentional and unintentional 'errors’ as an opportunity for corruption. In light of these findings, two conceptual BIM-based risk mitigation strategies are prescribed: active and passive automation of project audits; and the monitoring of project information throughout projects’ value chain. These propositions are made in reliance on BIM’s present dimensional capabilities and the promises of Integrated Project Delivery (IPD). Moreover, BIM’s synchronous potentials with other technologies such as Information and Communication Technology (ICT), and Radio Frequency technologies are topics which received a treatment. All these arguments form the basis for the main thesis of this dissertation, that BIM is able to mitigate corruption risks in the Ethiopian public construction sector. The discourse on the skepticisms about BIM that would stem from the complex nature of corruption and strategic as well as technological limitations of BIM is also illuminated and complemented by this work. Thus, the thesis uncovers possible research gaps and lays the foundation for further studies. KW - Building Information Modeling KW - Korruption KW - Risikomanagement KW - Äthiopien KW - Corruption KW - BIM KW - Risk management KW - Construction KW - Ethiopia Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211007-45175 ER - TY - THES A1 - Berninger, Anna Maria T1 - Mikrostrukturelle Eigenschaften von Quarz als Bestandteil spät reagierender, alkaliempfindlicher Zuschläge T1 - Microstructure of quartz as a component of slow-late-aggregate N2 - Zwischen den Jahren 1920 und 1930 kam es an der kalifornischen Küste zu Bauschäden an Brücken und Fahrbahnen, die sich vor allem in einer deutlichen Rissbildung äußerten. Seither werden immer wieder Bauschäden beschrieben, deren Ursache in der Reaktion von Zuschlägen, die „reaktive“ Kieselsäure enthalten, mit der Porenlösung des Betons zu sehen ist. Diese Reaktion wird als Alkali-Kieselsäure Reaktion (AKR) bezeichnet. Seit der ersten Veröffentlichung von Stanton über die „alkali-aggregate reaction“ an opalhaltigen Zuschlägen sind hunderte von Forschungsarbeiten zu diesem Thema durchgeführt und deren Ergebnisse veröffentlicht worden. Trotz eingehender Forschung seit mehr als 8o Jahren ist weder der Mechanismus der AKR vollständig geklärt noch eine eindeutige Voraussage über die Gefährdung von Bauwerken oder Bauteilen mit potentiell AKR-empfindlichen Zuschlägen möglich. Das liegt vor allen Dingen daran, das es sich bei der AKR um eine Reaktion handelt, die aus einer komplexen Abfolge chemischer und physikalischer Prozesse besteht, die in ihrer Gesamtheit zu einer Schädigung von Beton bzw. Betonbauteilen und Bauwerken führen können. Eine geschlossene Beschreibung und Behandlung dieser Reaktion ist nicht möglich, solange keine befriedigende Kenntnis über den Ablauf der einzelnen Schritte vorliegt. Dazu bedarf es grundsätzlicher Untersuchungen der einzelnen chemischen und physikalischen Reaktionsschritte sowie einer möglichst quantitativen Bewertung der verschiedenen Einflussfaktoren. Grundsätzlich gibt es weltweit eine ganze Reihe von Richtlinien und Normen , die dazu verhelfen sollen, Schädigungen an Bauwerken durch AKR zu verhindern. In Deutschland ist das momentan gültige Regelwerk die sogenannte Alkali-Richtlinie des deutschen Ausschusses für Stahlbeton (DAfStb). Sie dient zur Beurteilung von Zuschlag nach DIN 4226 [6, 7, 8] mit alkaliempfindlichen Bestandteilen. Dabei bezieht sich der Teil 2 der Richtlinie auf Zuschläge mit Opalsandstein, Kieselkreide und Flint aus bestimmten Gewinnungsgebieten. Hier wird eine reine Zuschlagprüfung gefordert. Teil 3 der Richtlinie bezieht sich auf präkambrische Grauwacken und andere alkaliempfindliche Gesteine. Gefordert werden hier Prüfungen der Zuschläge selbst sowie Prüfung an Betonbalken und 30er Würfeln in der Nebelkammer. Für die meisten in der Richtlinie genannten Zuschläge bilden die Prüfungen und Vorschriften eine ausreichende Sicherheit, um eine AKR zu vermeiden. Dennoch treten immer wieder Schäden mit Zuschlägen auf, die nach der Alkali-Richtlinie als unempfindlich eingestuft werden müssten. Dabei handelt es sich in der Regel um Schadensfälle, die erst nach mehreren Jahren mit spät reagierenden AKR-empfindlichen Zuschlägen auftreten. Zu diesen Zuschlägen, die gegebenenfalls speziell im Nebelkammertest innerhalb von neun Monaten keine signifikante Dehnung (<0,6mm/m) aufweisen, gehören Stressquarze, Kieselkalk, Granit, Porphyr, Kieselschiefer und Grauwacke. Die vorliegende Arbeit dient speziell der Beurteilung und Einordnung von unterschiedlichen kristallinen Quarzmodifikationen sowie der Ermittlung geeigneter Untersuchungsmethoden für die Beurteilung der AKR-Empfindlichkeit von Quarz. N2 - A lot of concrete deterioration due to ASR during the last years show, that it was not possible to estimate truly the al-kali-reactivity of aggregate. Also a true forecast, if a special concrete mixture or a building is insensible to ASR is not possible. The reason is, that there are damages especially with slow-late aggregates (greywacke, quartzite, rhyolite, stressed quartz…), although they were estimated as innocuous using the valid test methods. For getting more and true information about the ASR sensitivity of slow-late aggregates, interrelations between micro-structural properties and solubility were investigated. In special cases where is a good correlation between microstructure and solubility. But there are a lot of other influences. So only for a part of the investigated aggregates it is possible to get a good correla-tion. Thin section investigations, using light microscopy show, that the microstructure allows a prognosis how and where cracking will occur. KW - Quarz KW - Mikrostruktur KW - Alkali-Kieselsäure-Reaktion KW - slow-late-aggregate KW - alkali-silica-reaktion KW - microstructure KW - strain KW - stress Y1 - 2004 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20050310-4494 ER - TY - THES A1 - Bianco, Marcelo José T1 - Coupling between Shell and Generalized Beam Theory (GBT) elements N2 - In the last decades, Finite Element Method has become the main method in statics and dynamics analysis in engineering practice. For current problems, this method provides a faster, more flexible solution than the analytic approach. Prognoses of complex engineer problems that used to be almost impossible to solve are now feasible. Although the finite element method is a robust tool, it leads to new questions about engineering solutions. Among these new problems, it is possible to divide into two major groups: the first group is regarding computer performance; the second one is related to understanding the digital solution. Simultaneously with the development of the finite element method for numerical solutions, a theory between beam theory and shell theory was developed: Generalized Beam Theory, GBT. This theory has not only a systematic and analytical clear presentation of complicated structural problems, but also a compact and elegant calculation approach that can improve computer performance. Regrettably, GBT was not internationally known since the most publications of this theory were written in German, especially in the first years. Only in recent years, GBT has gradually become a fertile research topic, with developments from linear to non-linear analysis. Another reason for the misuse of GBT is the isolated application of the theory. Although recently researches apply finite element method to solve the GBT's problems numerically, the coupling between finite elements of GBT and other theories (shell, solid, etc) is not the subject of previous research. Thus, the main goal of this dissertation is the coupling between GBT and shell/membrane elements. Consequently, one achieves the benefits of both sides: the versatility of shell elements with the high performance of GBT elements. Based on the assumptions of GBT, this dissertation presents how the separation of variables leads to two calculation's domains of a beam structure: a cross-section modal analysis and the longitudinal amplification axis. Therefore, there is the possibility of applying the finite element method not only in the cross-section analysis, but also the development for an exact GBT's finite element in the longitudinal direction. For the cross-section analysis, this dissertation presents the solution of the quadratic eigenvalue problem with an original separation between plate and membrane mechanism. Subsequently, one obtains a clearer representation of the deformation mode, as well as a reduced quadratic eigenvalue problem. Concerning the longitudinal direction, this dissertation develops the novel exact elements, based on hyperbolic and trigonometric shape functions. Although these functions do not have trivial expressions, they provide a recursive procedure that allows periodic derivatives to systematise the development of stiffness matrices. Also, these shape functions enable a single-element discretisation of the beam structure and ensure a smooth stress field. From these developments, this dissertation achieves the formulation of its primary objective: the connection of GBT and shell elements in a mixed model. Based on the displacement field, it is possible to define the coupling equations applied in the master-slave method. Therefore, one can model the structural connections and joints with finite shell elements and the structural beams and columns with GBT finite element. As a side effect, the coupling equations limit the displacement field of the shell elements under the assumptions of GBT, in particular in the neighbourhood of the coupling cross-section. Although these side effects are almost unnoticeable in linear analysis, they lead to cumulative errors in non-linear analysis. Therefore, this thesis finishes with the evaluation of the mixed GBT-shell models in non-linear analysis. T3 - ISM-Bericht // Institut für Strukturmechanik, Bauhaus-Universität Weimar - 2021,2 KW - Biegetheorie KW - Finite Elemente Methode KW - Generalized Bean Theory KW - Finite Element KW - Thin-walled Structures KW - Cross-Section Warping KW - Cross-Section Distortion KW - Verallgemeinerte Technische Biegetheorie Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210315-43914 ER - TY - THES A1 - Blickling, Arno T1 - Spezifikation des Bau-Solls durch interaktive Modellierung auf virtuellen Baustellen T1 - Job Description by Interactive Production Modeling on Virtual Construction Sites N2 - Heutige Methoden zur Soll-Spezifikation von Bauleistungen (Kostenermittlung und zeitliche Ablaufplanung) gehen von einer abstrahierten und vereinfachten Betrachtung der Zusammenhänge bei Bauprojekten aus. Leistungsverzeichnisse, Kostenermittlungen und Bauzeitpläne orientieren sich nur indirekt an der Geometrie des Bauwerks und der Baustelle. Die dabei verwendeten Medien wie Papier, 2D-Dateien, digitale Leistungsbeschreibungen oder 3D-Darstellungen lassen die Suche nach Informationen auf der Baustelle zu einem zeitaufwändigen und in Anbetracht existierender Medientechnologien ineffizienten Prozess werden. Interaktive virtuelle Umgebungen erlauben die Auflösung starrer Zusammenhänge durch interaktive Eingriffe des Anwenders und visualisieren komplexe bauproduktionstechnische Vorgänge. Das Konzept der visuellen interaktiven Simulation der Bauproduktion sieht vor, die Soll-Spezifikation anhand eines interaktiven 3D-Modells zu entwickeln, um räumliche Veränderungen und parallele Prozesse auf der virtuellen Baustelle im Rahmen der Entscheidungsfindung zum Bauablauf besser berücksichtigen zu können. Verlangt man einen hohen Grad an Interaktivität mit dem 3D-Modell, dann bieten sich Computerspieltechnologien sehr gut zu Verifikationszwecken an. Die visuelle interaktive Simulation der Bauproduktion ist damit als eine 3D-modellbasierte Methode der Prozessmodellierung zu verstehen, die Entscheidungen als Input benötigt und die Kostenermittlung sowie die zeitliche Ablaufplanung als Output liefert. N2 - Current methods for the description of construction works presume a high abstraction level to simplify the constraints between single processes of a process model. The determination of costs together with the specification of a time schedule form the primary components (to-be-built) of this description. Cost estimations, bills of quantities and bar charts are not directly connected to the geometry of the product nore of the construction site. The used media like paper, 2D-files or – in best case scenarios – 3D pictures lead us to a time-consuming information retrieval on the site. Considering modern media technologies these processes are inefficient and demand for alternative scenarios based on 3D-models. In this work a concept for interaction with a virtual construction site is presented. The user can interact with objects on the site in such a way that he initiates the execution of single process steps in the complex production model of the site. The approach to visual interactive simulation (VIS) leads to a to-be-built specification of construction works (determination of costs and 4D-model). Thus spatial changes and parallel processes can be considered when modeling the construction sequence on the virtuel site. If one requirement of the solution is a high level of interactivity between the user and the model then game development engines are a suitable tool for the verification of the approach. This work integrates tendering issues with cost estimation and 4D-modeling in order to develop an interactive method for the simulation of construction works. This simulation approach is based on the 3D-model of the site and requires human-based decisions as an input while delivering costs and a 4D-model on a high level of detail as an output. T3 - Schriften der Professur Baubetrieb und Bauverfahren - 13 KW - Virtuelle Realität KW - Bauablauf KW - interaktiv KW - Stuttgart / Sonderforschungsbereich Rechnergestützte Modellierung und Simulation zur Analyse KW - Bausoll KW - interactive KW - simulation KW - job description KW - sequence KW - cost estimation KW - Kalkulation Y1 - 2006 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20061105-8311 ER -