TY - THES A1 - Zafar, Usman T1 - Probabilistic Reliability Analysis of Wind Turbines N2 - Renewable energy use is on the rise and these alternative resources of energy can help combat with the climate change. Around 80% of the world's electricity comes from coal and petroleum however, the renewables are the fastest growing source of energy in the world. Solar, wind, hydro, geothermal and biogas are the most common forms of renewable energy. Among them, wind energy is emerging as a reliable and large-scaled source of power production. The recent research and confidence in the performance has led to the construction of more and bigger wind turbines around the world. As wind turbines are getting bigger, a concern regarding their safety is also in discussion. Wind turbines are expensive machinery to construct and the enormous capital investment is one of the main reasons, why many countries are unable to adopt to the wind energy. Generally, a reliable wind turbine will result in better performance and assist in minimizing the cost of operation. If a wind turbine fails, it's a loss of investment and can be harmful for the surrounding habitat. This thesis aims towards estimating the reliability of an offshore wind turbine. A model of Jacket type offshore wind turbine is prepared by using finite element software package ABAQUS and is compared with the structural failure criteria of the wind turbine tower. UQLab, which is a general uncertainty quantification framework developed at ETH Zürich, is used for the reliability analysis. Several probabilistic methods are included in the framework of UQLab, which include Monte Carlo, First Order Reliability Analysis and Adaptive Kriging Monte Carlo simulation. This reliability study is performed only for the structural failure of the wind turbine but it can be extended to many other forms of failures e.g. reliability for power production, or reliability for different component failures etc. It's a useful tool that can be utilized to estimate the reliability of future wind turbines, that could result in more safer and better performance of wind turbines. KW - Windturbine KW - Windenergie KW - Wind Turbines KW - Wind Energy KW - Reliability Analysis KW - Zuverlässigkeitsanalyse Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20240507-39773 ER - TY - THES A1 - Wolff, Thomas T1 - Ein methodischer Bemessungsansatz zur Abschätzung des Tragverhaltens von Pfahlgründungen in weichem kalkigen Sedimentgestein T1 - A Methodical Design Approach to estimate the Laod Bearing Capacity of Pile Foundations in soft calcareous Sedimentary Rock N2 - In der vorliegenden Arbeit wird das Tragverhalten und das Sicherheitsniveau axial belasteter Großbohrpfähle in den pleistozänen Kalkarenit der Küstenregion von Dubai untersucht. Zunächst wird auf der Grundlage von Ergebnissen umfangreicher Baugrundanalysen und Probebelastungen das Tragverhalten detailliert beschrieben. Anschließend wird ein auf der Finiten-Elemente-Methode basierendes Strukturmodell zur Simulation des Last-Setzungsverhaltens von Großbohrpfählen im Sinne eines numerischen Versuchsstandes entwickelt. Um herstellungsbedingte Veränderungen der Baugrundeigenschaften in der Kontaktzone Pfahl-Baugrund zu berücksichtigen, die mit boden- und felsmechanischen Elementversuchen gewöhnlich nicht erfassbar sind, werden die Größen der relevanten konstitutiven Parameterwerte iterativ mittels inverser Optimierungsstrategien bestimmt. Abschließend wird eine methodische Vorgehensweise aufgezeigt, wie das Sicherheitsniveau axial belasteter Großbohrpfählen unter Berücksichtigung der räumlichen Variabilität der Baugrundeigenschaften zuverlässig abgeschätzt werden kann. N2 - The main focus of this dissertation is, how the Estimation of the Load-Settlement behaviour of axial loaded Pile foundation can be improved when the constitutive parametervalues are invers indentified by Optimisation strategies. Following it is shown how the reliability of pile foundations can be estimated on the basis of the identified parametervalues and the lod test results. T3 - Schriftenreihe Geotechnik - 22 KW - Pfahl KW - Pfahlgründung KW - Bemessung KW - Partikel-Schwarm-Optimierung KW - Optimierung KW - Zuverlässigkeit KW - Faseroptischer Sensor KW - Sediment KW - Parameteridentif KW - Autokorrelationslänge KW - Pfahlprobebelastung KW - Pile Foundation KW - Pile Load Test KW - Reliability KW - fiber optical Sensor KW - Paramter Identification Y1 - 2009 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20100125-14993 ER - TY - INPR A1 - Witt, Karl Josef A1 - Wudtke, Robert-Balthasar T1 - Implementation and Improvement of Design and Authorisation Procedures for proposed Tailings Facilities N2 - The report is part of the research project 'TAILSAFE'. The project is supported by the european union. Basics of design and investigation procedures are presented within the report. Furthermore possible applications of design and investigation procedures are evaluated concerning to a smooth work during all using phases of a tailings facility, that is the planning and execution. Finally recomendations are given to optimise the handling with significant standards. N2 - Der Bericht ist Teil des von der Europäischen Gemeinschaft geförderten Forschungsprojektes 'Tailsafe'. Im Bericht werden Grundlagen der von Bemessungs- und Erkundungsprozeduren übersichtlich dargestellt und im Hinblick auf einen möglichst reibunglosen Ablauf zu allen Nutzungsphasen einer Tailings-Anlage ausgewertet. Schließlich werden Empfehlungen zur Optimierung der durch öffizielle Stellen zu verwendenden Regelwerke gegeben. KW - Bergeteich KW - Feldversuch KW - Experiment KW - Geotechnik KW - Hydrologie KW - Management KW - Arbeitsablauf KW - Reststoff KW - Bergbau KW - tailings dam KW - tailings facility Y1 - 2005 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20111215-7964 ER - TY - THES A1 - Wieteska, Marcin T1 - Untersuchungen zur Optimierung des Feuerwiderstandsverhaltens von Gipsplatten N2 - Die Qualität von Beplankungselementen wirkt sich deutlich auf den Feuerwiderstand von Metallständer-Wandkonstruktionen aus. Daher wurde im Rahmen dieser Arbeit der Einfluss von Zusätzen in Gipsplatten bezüglich einer möglichen Verbesserung dieser Eigenschaft untersucht. Zu diesem Zweck wurden spezielle, den jeweiligen Untersuchungsbedingungen angepasste Probekörper unter Verwendung verschiedenster Zusätze gefertigt. Die Beurteilung deren Auswirkungen erfolgte insbesondere mittels nachfolgender fünf Kriterien: 1) dem Zeitpunkt der Temperaturerhöhung nach der Probekörperentwässerung, 2) dem Maximalwert der Plattenrückseitentemperatur, 3) der Größe und der Anzahl der Risse, 4) der Plattenstabilität nach der Wärmebeanspruchung, 5) der Verkürzung von prismatischen Probekörpern. Besonders wichtig war hierbei die Charakterisierung der Auswirkungen einer simulierten Brandbeanspruchung von 970 °C über 90 Minuten auf Labor-Gipsplatten. Dabei wurde die Temperaturänderung auf der Plattenrückseite über den gesamten Prüfzeitraum kontinuierlich erfasst. Die Bewertung des Zusammenhalts der Platten nach der thermischen Beanspruchung erfolgte erstmals quantitativ über Anzahl und Größe der an den Proben entstandenen Risse. Ursächlich für die Rissbildung ist die Verringerung des Probekörpervolumens infolge des ausgetriebenen Kristallwassers. Da dieser Parameter im Plattenversuch nicht bestimmt werden kann, wurde ergänzend das Längenänderungsverhalten von Prismen im Ergebnis einer 90minütigen Temperung bei 1000 °C im Muffelofen ermittelt. Besonders vorteilhaft hat sich die Zugabe von 80 g/m2 Glasfasern und 7,75 % Kalksteinmehl auf das Verhalten von Gipsplatten bei Brandbeanspruchung ausgewirkt. Diese Verbesserung ist insbesondere auf höhere Stabilität und geringere Schrumpfung der Gipsplatte zurückzuführen. Basierend auf den im Labormaßstab erhaltenen Ergebnissen wurden Rezepturvorschläge zur Verbesserung des Feuerwiderstandsverhaltens von Gipsplatten unter Praxisbedingungen entwickelt. Die Herstellung der erforderlichen großformatigen Platten erfolgte auf der Bandstraße der Knauf Gips KG. Diese Platten wurden als Wandkonstruktion mit zweilagiger Beplankung einer großtechnischen Prüfung erfolgreich unterzogen. Eine geringere Durchbiegung der Wandkonstruktion, eine verminderte Volumenreduzierung der Platten sowie eine erhöhte Plattenstabilität belegen die verbesserten Eigenschaften dieser modifizierten Feuerschutzplatte. Weitere durchgeführte Untersuchungen ergaben, dass es unerheblich ist, ob die Platten auf Basis von Natur- oder REA-Gips bzw. mit hohem oder niedrigem Flächengewicht gefertigt wurden. Das eindeutig beste Ergebnis mit einer Feuerwiderstandsdauer von 118 Minuten hat eine Wandkonstruktion aus Feuerschutzplatten auf Basis eines Stuckgipses aus 100 % REA-Gips mit einem Anteil von 83,9 g/m2 Glasfasern und 1 % Vermiculit und einem Flächengewicht von 10,77 kg/m2, bei einer Plattenstärke von 12,5 mm. Die als Ziel vorgebende Feuerwiderstandsdauer von 120 Minuten bei zweilagiger Beplankung ohne Dämmstoff könnte künftig erreicht werden, wenn es gelingt, die Volumenreduzierung noch besser zu kompensieren und die Plattenstabilität zu steigern. Eine Möglichkeit hierzu ist die Substitution der beidseitigen Kartonlagen durch eine Glasfaser-Vliesummantelung. Die Wandkonstruktion W112 ohne Dämmstoff erreicht dabei eine Feuerwiderstandsdauer von weit über 120 Minuten, wobei der Gipskern mit Glasfasern armiert ist. KW - 0947 KW - 0948 KW - 0949 KW - fire KW - gypsum KW - plasterboard KW - Feuer KW - Gips Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20121207-17829 SN - 978-83-936473-0-9 PB - Marcin Wieteska CY - Warszawa ER - TY - THES A1 - Wellnitz, Felix T1 - BAUKLIMATISCHE ERTÜCHTIGUNG UND NACHHALTIGE INSTANDSETZUNG DENKMALGESCHÜTZTER VERWALTUNGSBAUTEN DER 1950er JAHRE AM BEISPIEL DER EHEMALIGEN BAYERISCHEN LANDESVERTRETUNG VON SEP RUF IN BONN N2 - Viele Baudenkmale sind dem Konflikt aus baulichem Instandsetzungsbedarf für eine zeitgemäße Nutzung und einer sich möglicherweise daraus ergebenden Gefährdung der Denkmalsubstanz ausgesetzt. Gründe sind steigende Energiekosten für den Gebäudebetrieb, zeitgemäße Anforderungen an Behaglichkeit und Arbeitsschutz, sowie die Vermeidung von Schäden an der Substanz aufgrund baulicher Mängel des konstruktiven Wärme- und Feuchteschutzes. Gleichzeitig gilt für viele Bauten aber auch die Notwendigkeit regelmäßiger Nutzung und Bewirtschaftung, um den Erhalt überhaupt zu sichern. Die energetische Ertüchtigung von Baudenkmalen scheitert in diesem Spannungsfeld oft am unlösbaren Konflikt zwischen dem Erhalt der bauzeitlichen Substanz auf der einen und der notwendigen energetischen Optimierung der Gebäudehülle auf der anderen Seite. Zielsetzung dieser Fallstudie ist die beispielhafte Entwicklung einer bauklimatischen und denkmalgerechten Ertüchtigungsstrategie am Beispiel eines Verwaltungsgebäudes der Nachkriegsmoderne als Beitrag zur Lösung dieses Konfliktes. KW - Denkmalpflege KW - Bauklimatik KW - Bauphysik KW - Sanierung KW - Nachkriegsmoderne KW - Ertüchtigung Y1 - 2014 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20140919-23031 ER - TY - CHAP A1 - Völlmecke, Lars A1 - Schwendner, Sascha A1 - Ho, Ai Phien A1 - Fischer, Jens A1 - Seim, Werner T1 - Assessment of nailed connections in existing structures N2 - This paper presents the development of an assessment scheme for a visual qualitative evaluation of nailed connections in existing structures, such as board trusses. In terms of further use and preservation, a quick visual inspection will help to evaluate the quality of a structure regarding its load-bearing capacity and deformation behaviour. Tests of old and new nailed joints in combination with a rating scheme point out the correlation between the load-bearing capacity and condition of a joint. Old joints of comparatively good condition tend to exhibit better results than those of poor condition. Moreover, aged joints are generally more load-bearing than newly assembled ones. KW - Holzbau KW - Träger KW - nailed trusses KW - nailed constructions KW - Corrosion KW - Preservation KW - Re-use Y1 - 2023 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20230609-63615 ER - TY - JOUR A1 - Völker, Conrad A1 - Beckmann, Julia A1 - Koehlmann, Sandra A1 - Kornadt, Oliver T1 - Occupant requirements in residential buildings – an empirical study and a theoretical model JF - Advances in Building Energy Research N2 - Occupant needs with regard to residential buildings are not well known due to a lack of representative scientific studies. To improve the lack of data, a large scale study was carried out using a Post Occupancy Evaluation of 1,416 building occupants. Several criteria describing the needs of occupants were evaluated with regard to their subjective level of relevance. Additionally, we investigated the degree to which deficiencies subjectively exist, and the degree to which occupants were able to accept them. From the data obtained, a hierarchy of criteria was created. It was found that building occupants ranked the physiological needs of air quality and thermal comfort the highest. Health hazards such as mould and contaminated building materials were unacceptable for occupants, while other deficiencies were more likely to be tolerated. Occupant satisfaction was also investigated. We found that most occupants can be classified as satisfied, although some differences do exist between different populations. To explain the relationship between the constructs of what we call relevance, acceptance, deficiency and satisfaction, we then created an explanatory model. Using correlation and regression analysis, the validity of the model was then confirmed by applying the collected data. The results of the study are both relevant in shaping further research and in providing guidance on how to maximize tenant satisfaction in real estate management. KW - Post Occupancy Evaluation KW - Gebäude KW - Benutzung KW - occupant requirements KW - occupant satisfaction KW - residential buildings KW - housing KW - questionnaire Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181015-38137 UR - https://www.tandfonline.com/doi/abs/10.1080/17512549.2012.749808 N1 - This is an Accepted Manuscript of an article published by Taylor & Francis in Advances in Building Energy Research on 29/01/2013, available online: https://www.tandfonline.com/doi/abs/10.1080/17512549.2012.749808. IS - 7 (1) SP - 35 EP - 50 ER - TY - THES A1 - Vu, Bac Nam T1 - Stochastic uncertainty quantification for multiscale modeling of polymeric nanocomposites N2 - Nanostructured materials are extensively applied in many fields of material science for new industrial applications, particularly in the automotive, aerospace industry due to their exceptional physical and mechanical properties. Experimental testing of nanomaterials is expensive, timeconsuming,challenging and sometimes unfeasible. Therefore,computational simulations have been employed as alternative method to predict macroscopic material properties. The behavior of polymeric nanocomposites (PNCs) are highly complex. The origins of macroscopic material properties reside in the properties and interactions taking place on finer scales. It is therefore essential to use multiscale modeling strategy to properly account for all large length and time scales associated with these material systems, which across many orders of magnitude. Numerous multiscale models of PNCs have been established, however, most of them connect only two scales. There are a few multiscale models for PNCs bridging four length scales (nano-, micro-, meso- and macro-scales). In addition, nanomaterials are stochastic in nature and the prediction of macroscopic mechanical properties are influenced by many factors such as fine-scale features. The predicted mechanical properties obtained by traditional approaches significantly deviate from the measured values in experiments due to neglecting uncertainty of material features. This discrepancy is indicated that the effective macroscopic properties of materials are highly sensitive to various sources of uncertainty, such as loading and boundary conditions and material characteristics, etc., while very few stochastic multiscale models for PNCs have been developed. Therefore, it is essential to construct PNC models within the framework of stochastic modeling and quantify the stochastic effect of the input parameters on the macroscopic mechanical properties of those materials. This study aims to develop computational models at four length scales (nano-, micro-, meso- and macro-scales) and hierarchical upscaling approaches bridging length scales from nano- to macro-scales. A framework for uncertainty quantification (UQ) applied to predict the mechanical properties of the PNCs in dependence of material features at different scales is studied. Sensitivity and uncertainty analysis are of great helps in quantifying the effect of input parameters, considering both main and interaction effects, on the mechanical properties of the PNCs. To achieve this major goal, the following tasks are carried out: At nano-scale, molecular dynamics (MD) were used to investigate deformation mechanism of glassy amorphous polyethylene (PE) in dependence of temperature and strain rate. Steered molecular dynamics (SMD)were also employed to investigate interfacial characteristic of the PNCs. At mico-scale, we developed an atomistic-based continuum model represented by a representative volume element (RVE) in which the SWNT’s properties and the SWNT/polymer interphase are modeled at nano-scale, the surrounding polymer matrix is modeled by solid elements. Then, a two-parameter model was employed at meso-scale. A hierarchical multiscale approach has been developed to obtain the structure-property relations at one length scale and transfer the effect to the higher length scales. In particular, we homogenized the RVE into an equivalent fiber. The equivalent fiber was then employed in a micromechanical analysis (i.e. Mori-Tanaka model) to predict the effective macroscopic properties of the PNC. Furthermore, an averaging homogenization process was also used to obtain the effective stiffness of the PCN at meso-scale. Stochastic modeling and uncertainty quantification consist of the following ingredients: - Simple random sampling, Latin hypercube sampling, Sobol’ quasirandom sequences, Iman and Conover’s method (inducing correlation in Latin hypercube sampling) are employed to generate independent and dependent sample data, respectively. - Surrogate models, such as polynomial regression, moving least squares (MLS), hybrid method combining polynomial regression and MLS, Kriging regression, and penalized spline regression, are employed as an approximation of a mechanical model. The advantage of the surrogate models is the high computational efficiency and robust as they can be constructed from a limited amount of available data. - Global sensitivity analysis (SA) methods, such as variance-based methods for models with independent and dependent input parameters, Fourier-based techniques for performing variance-based methods and partial derivatives, elementary effects in the context of local SA, are used to quantify the effects of input parameters and their interactions on the mechanical properties of the PNCs. A bootstrap technique is used to assess the robustness of the global SA methods with respect to their performance. In addition, the probability distribution of mechanical properties are determined by using the probability plot method. The upper and lower bounds of the predicted Young’s modulus according to 95 % prediction intervals were provided. The above-mentioned methods study on the behaviour of intact materials. Novel numerical methods such as a node-based smoothed extended finite element method (NS-XFEM) and an edge-based smoothed phantom node method (ES-Phantom node) were developed for fracture problems. These methods can be used to account for crack at macro-scale for future works. The predicted mechanical properties were validated and verified. They show good agreement with previous experimental and simulations results. KW - Polymere KW - nanocomposite KW - Nanoverbundstruktur KW - stochastic KW - multiscale Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20160322-25551 ER - TY - THES A1 - Vogler, Verena T1 - A framework for artificial coral reef design: Integrating computational modelling and high precision monitoring strategies for artificial coral reefs – an Ecosystem-aware design approach in times of climate change N2 - Tropical coral reefs, one of the world’s oldest ecosystems which support some of the highest levels of biodiversity on the planet, are currently facing an unprecedented ecological crisis during this massive human-activity-induced period of extinction. Hence, tropical reefs symbolically stand for the destructive effects of human activities on nature [4], [5]. Artificial reefs are excellent examples of how architectural design can be combined with ecosystem regeneration [6], [7], [8]. However, to work at the interface between the artificial and the complex and temporal nature of natural systems presents a challenge, i.a. in respect to the B-rep modelling legacy of computational modelling. The presented doctorate investigates strategies on how to apply digital practice to realise what is an essential bulwark to retain reefs in impossibly challenging times. Beyond the main question of integrating computational modelling and high precision monitoring strategies in artificial coral reef design, this doctorate explores techniques, methods, and linking frameworks to support future research and practice in ecology led design contexts. Considering the many existing approaches for artificial coral reefs design, one finds they often fall short in precisely understanding the relationships between architectural and ecological aspects (e.g. how a surface design and material composition can foster coral larvae settlement, or structural three-dimensionality enhance biodiversity) and lack an integrated underwater (UW) monitoring process. Such a process is necessary in order to gather knowledge about the ecosystem and make it available for design, and to learn whether artificial structures contribute to reef regeneration or rather harm the coral reef ecosystem. For the research, empirical experimental methods were applied: Algorithmic coral reef design, high precision UW monitoring, computational modelling and simulation, and validated through parallel real-world physical experimentation – two Artificial Reef Prototypes (ARPs) in Gili Trawangan, Indonesia (2012–today). Multiple discrete methods and sub techniques were developed in seventeen computational experiments and applied in a way in which many are cross valid and integrated in an overall framework that is offered as a significant contribution to the field. Other main contributions include the Ecosystem-aware design approach, Key Performance Indicators (KPIs) for coral reef design, algorithmic design and fabrication of Biorock cathodes, new high precision UW monitoring strategies, long-term real-world constructed experiments, new digital analysis methods and two new front-end web-based tools for reef design and monitoring reefs. The methodological framework is a finding of the research that has many technical components that were tested and combined in this way for the very first time. In summary, the thesis responds to the urgency and relevance in preserving marine species in tropical reefs during this massive extinction period by offering a differentiated approach towards artificial coral reefs – demonstrating the feasibility of digitally designing such ‘living architecture’ according to multiple context and performance parameters. It also provides an in-depth critical discussion of computational design and architecture in the context of ecosystem regeneration and Planetary Thinking. In that respect, the thesis functions as both theoretical and practical background for computational design, ecology and marine conservation – not only to foster the design of artificial coral reefs technically but also to provide essential criteria and techniques for conceiving them. Keywords: Artificial coral reefs, computational modelling, high precision underwater monitoring, ecology in design. N2 - Charakteristisch für das Zeitalter des Klimawandels sind die durch den Menschen verursachte Meeresverschmutzung sowie ein massiver Rückgang der Artenvielfalt in den Weltmeeren. Tropische Korallenriffe sind als eines der ältesten und artenreichsten Ökosysteme der Erde besonders stark gefährdet und stehen somit symbolisch für die zerstörerischen Auswirkungen menschlicher Aktivitäten auf die Natur [4], [5]. Um dem massiven Rückgang der Korallenriffe entgegenzuwirken, wurden von Menschen künstliche Riffsysteme entwickelt [6], [7]. Sie sind Beispiele dafür, wie Architektur und die Regenerierung von Ökosystemen miteinander verbunden werden können [8]. Eine Verknüpfung von einerseits künstlichen und andererseits komplexen, sich verändernden natürlichen Systemen, stellt jedoch eine Herausforderung dar, u.a. in Bezug auf die Computermodellierung (B-Rep Modellierung). Zum Erhalt der Korallenriffe werden in der vorliegende Doktorarbeit Strategien aus der digitalen Praxis neuartig auf das Entwerfen von künstlichen Korallenriffen angewendet. Die Hauptfrage befasst sich damit, wie der Entwurfsprozess von künstlichen Korallenriffen unter Einbeziehung von Computermodellierung und hochpräzisen Überwachungsstrategien optimiert werden kann. In diesem Zusammenhang werden Techniken, Methoden sowie ein übergeordnetes Framework erforscht, welche zukünftige Forschung und Praxis in Bezug auf Ökologie-geleitete Entwurfsprozesse fördern soll. In Anbetracht der vielen vorhandenen künstlichen Riffsysteme, kann man feststellen, dass die Zusammenhänge zwischen Architektur- und Ökosystem-Anforderungen nicht genau untersucht und dadurch bei der Umsetzung nicht entsprechend berücksichtigt werden. Zum Beispiel wie Oberflächenbeschaffenheit und Materialität eine Ansiedlung von Korallenlarven begünstigt oder wie eine räumlich vielseitige Struktur die Artenvielfalt verbessern kann. Zudem fehlt ein integrierter Unterwasser-Überwachungsprozess, welcher Informationen über das Ökosystem liefert und diese dem Entwurf bereitstellt. Zusätzlich ist eine Unterwasser-Überwachung notwendig, um herauszufinden, ob die künstlichen Riffstrukturen zur Regenerierung beitragen oder dem Ökosystem gänzlich schaden. In dieser Forschungsarbeit werden empirische und experimentelle Methoden angewendet: Algorithmisches Entwerfen für Korallenriffe, hochpräzise Unterwasser-Überwachung, Computermodellierung und -simulation. Die Forschung wird seit 2012 bis heute durch zwei Riffprototypen (Artificial Reef Prototypes – ARPs) in Gili Trawangan, Indonesien validiert. Zusätzlich wurden weitere separate Methoden und Techniken in insgesamt siebzehn computergestützten Experimenten entwickelt und so angewendet, dass viele kreuzvalidiert und in ein Framework integriert sind, welches dann als bedeutender Beitrag dem Forschungsgebiet zur Verfügung steht. Weitere Hauptbeiträge sind der Ökosystem-bewusste Entwurfsansatz (Ecosystem-aware design approach), Key Performance Indicators (KPIs) für das Gestalten von Korallenriffen, algorithmisches Entwerfen und die Herstellung von Biorock-Kathoden, neue hochpräzise Unterwasser-Überwachungsstrategien, reale Langzeitexperimente, neue digitale Analysemethoden, sowie zwei webbasierte Softwareanwendungen für die Gestaltung und die Überwachung von künstlichen Korallenriffen. Das methodische Framework ist das Hauptergebnis der Forschung, da die vielen technischen Komponenten in dieser Weise zum ersten Mal getestet und kombiniert wurden. Zusammenfassend reagiert die vorliegende Doktorarbeit sowohl auf die Dringlichkeit als auch auf die Relevanz der Erhaltung von Artenvielfalt in tropischen Korallenriffen in Zeiten eines massiven Aussterbens, indem sie einen differenzierten Entwurfsansatz für künstliche Korallenriffe offeriert. Die Arbeit zeigt auf, dass ein digitales Entwerfen einer solchen „lebendigen Architektur“ unter Berücksichtigung vielfältiger Anforderungen und Leistungsparametern machbar ist. Zusätzlich bietet sie eine ausführliche kritische Diskussion über die Rolle von computergestützten Entwerfen und Architektur im Zusammenhang mit Regenerierung von Ökosystemen und “Planetary Thinking”. In dieser Hinsicht fungiert die Doktorarbeit als theoretischer und praktischer Hintergrund für computergestütztes Entwerfen, Ökologie und Meeresschutz. Eine Verbesserung des Entwerfens von künstlichen Korallenriffen wird nicht nur auf technischer Ebene aufgezeigt, sondern es werden auch die wesentlichen Kriterien und Techniken für deren Umsetzung benannt. Schlüsselwörter: Künstliche Korallenriffe, Computermodellierung, hochpräzise Unterwasser-Überwachung, Ökologie im Architekturentwurf. KW - Korallenriff KW - Algorithmus KW - Architektur KW - Meeresökologie KW - Software KW - Artificial coral reefs KW - Computational modelling KW - High precision underwater monitoring KW - Ecology in design KW - Künstliche Korallenriffe KW - Unterwasserarchitektur Y1 - 2022 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220322-46115 UR - https://artificialreefdesign.com/ SN - 978-3-00-074495-2 N1 - Die URL führt zu 3D Modelle von echten Korallenriffen. ER - TY - RPRT A1 - Vogel, Albert A1 - Völker, Conrad A1 - Arnold, Jörg A1 - Schmidt, Jens A1 - Thurow, Torsten A1 - Braunes, Jörg A1 - Tonn, Christian A1 - Bode, Kay-André A1 - Baldy, Franziska A1 - Erfurt, Wolfgang A1 - Tatarin, René T1 - Methoden und Baustoffe zur nutzerorientierten Bausanierung. Schlussbericht zum InnoProfile Forschungsvorhaben N2 - Nutzerorientierte Bausanierung bedeutet eine gegenüber dem konventionellen Vorgehen deutlich verstärkte Ausrichtung des Planungs- und Sanierungsprozesses auf die Anforderungen und Bedürfnisse des zukünftigen Nutzers eines Gebäudes. Dies hat einerseits ein hochwertigeres Produkt zum Ergebnis, erfordert andererseits aber auch den Einsatz neuer Methoden und Baustoffe sowie ein vernetztes Zusammenarbeiten aller am Bauprozess Beteiligten. Der Fokus der Publikation liegt dabei auf den Bereichen, die eine hohe Relevanz für die nutzerorientierte Bausanierung aufweisen. Dabei handelt es sich insbesondere um: Computergestütztes Bauaufmaß und digitale Bauwerksmodellierung (BIM), bauphysikalische Methoden zur Optimierung von Energieeffizienz und Behaglichkeit bei der Sanierung von Bestandsgebäuden, zerstörungsfreie Untersuchungsmethoden im Rahmen einer substanzschonenden Bauzustandsanalyse und Entwicklung von Ergänzungsbaustoffen. Das Projekt nuBau ist eine Kooperation zwischen den Fakultäten Bauingenieurwesen und Architektur der Bauhaus-Universität Weimar. Die beteiligten Professuren sind: Bauphysik, Informatik in der Architektur, Polymere Werkstoffe und Werkstoffe des Bauens. T3 - Schriftenreihe der Professur Bauphysik - 5 KW - Nutzerorientierte Bausanierung KW - BIM KW - zerstörungsfreie Prüfung KW - bauphysikalische Methoden KW - Ergänzungsbaustoffe Y1 - 2013 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20130830-20229 UR - http://www.uni-weimar.de/cms/bauing/projekte/nubau/home.html SN - 978-3-86068-501-3 (Printausg.) ER -