TY - CHAP A1 - Göbel, Luise A1 - Osburg, Andrea A1 - Lahmer, Tom ED - Gürlebeck, Klaus ED - Lahmer, Tom T1 - STUDY OF ANALYTICAL MODELS OF THE MECHANICAL BEHAVIOR OF POLYMER-MODIFIED CONCRETE T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 20 - 22 2015, Bauhaus-University Weimar N2 - Polymer modification of mortar and concrete is a widely used technique in order to improve their durability properties. Hitherto, the main application fields of such materials are repair and restoration of buildings. However, due to the constant increment of service life requirements and the cost efficiency, polymer modified concrete (PCC) is also used for construction purposes. Therefore, there is a demand for studying the mechanical properties of PCC and entitative differences compared to conventional concrete (CC). It is significant to investigate whether all the assumed hypotheses and existing analytical formulations about CC are also valid for PCC. In the present study, analytical models available in the literature are evaluated. These models are used for estimating mechanical properties of concrete. The investigated property in this study is the modulus of elasticity, which is estimated with respect to the value of compressive strength. One existing database was extended and adapted for polymer-modified concrete mixtures along with their experimentally measured mechanical properties. Based on the indexed data a comparison between model predictions and experiments was conducted by calculation of forecast errors. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Building Information Modeling KW - Computerunterstütztes Verfahren KW - Data, information and knowledge modeling in civil engineering; Function theoretic methods and PDE in engineering sciences; Mathematical methods for (robotics and) computer vision; Numerical modeling in engineering; Optimization in engineering applications Y1 - 2015 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27973 SN - 1611-4086 ER - TY - CHAP A1 - Motra, Hem Bahadur A1 - Dimmig-Osburg, Andrea A1 - Hildebrand, Jörg ED - Gürlebeck, Klaus ED - Lahmer, Tom ED - Werner, Frank T1 - UNCERTAINTY QUANTIFICATION IN CYCLIC CREEP PREDICTION OF CONCRETE T2 - Digital Proceedings, International Conference on the Applications of Computer Science and Mathematics in Architecture and Civil Engineering : July 04 - 06 2012, Bauhaus-University Weimar N2 - This paper presents a methodology for uncertainty quantification in cyclic creep analysis. Several models- , namely BP model, Whaley and Neville model, modified MC90 for cyclic loading and modified Hyperbolic function for cyclic loading are used for uncertainty quantification. Three types of uncertainty are included in Uncertainty Quantification (UQ): (i) natural variability in loading and materials properties; (ii) data uncertainty due to measurement errors; and (iii) modelling uncertainty and errors during cyclic creep analysis. Due to the consideration of all type of uncertainties, a measure for the total variation of the model response is achieved. The study finds that the BP, modified Hyperbolic and modified MC90 are best performing models for cyclic creep prediction in that order. Further, global Sensitivity Analysis (SA) considering the uncorrelated and correlated parameters is used to quantify the contribution of each source of uncertainty to the overall prediction uncertainty and to identifying the important parameters. The error in determining the input quantities and model itself can produce significant changes in creep prediction values. The variability influence of input random quantities on the cyclic creep was studied by means of the stochastic uncertainty and sensitivity analysis namely the Gartner et al. method and Saltelli et al. method. All input imperfections were considered to be random quantities. The Latin Hypercube Sampling (LHS) numerical simulation method (Monte Carlo type method) was used. It has been found by the stochastic sensitivity analysis that the cyclic creep deformation variability is most sensitive to the Elastic modulus of concrete, compressive strength, mean stress, cyclic stress amplitude, number of cycle, in that order. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Computerunterstütztes Verfahren Y1 - 2012 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-27803 UR - http://euklid.bauing.uni-weimar.de/ikm2012 SN - 1611-4086 ER - TY - CHAP A1 - Schirmer, Ulrike A1 - Kleiner, Florian A1 - Osburg, Andrea T1 - Objektive Oberflächenbewertung von (P)SCC-Sichtbeton mittels automatisierter Analyse von Bilddaten T2 - Tagung Bauchemie der GDCH-Fachgruppe Bauchemie, 30. September - 2. Oktober 2019 in Aachen N2 - Sichtbeton ist aufgrund seiner Vielfältigkeit in der Formgebung eines der am meisten verbreiteten Gestaltungsmittel der modernen Architektur und optimal für neue Bauweisen sowie steigende Anforderungen an das Erscheinungsbild öffentlicher Bauwerke geeignet. Die Herstellung qualitativ hochwertiger Sichtbetonoberflächen hängt im hohen Maße von den Wechselwirkungen zwischen Beton und Trennmittel, zwischen Trennmittel und Schalmaterial, sowie von der Applikationsart und -menge des Trennmittels ab. In Laborversuchen wurden diese Einflüsse auf die Sichtbetonoberflächen eines polymermodifizierten selbstverdichtenden Betons (PSCC) im Vergleich zu einem herkömmlichen selbstverdichtenden Beton (SCC) untersucht. Im Rahmen dieser Arbeiten wurde eine Methode zur Beurteilung der Sichtbetonqualität entwickelt, mit welcher Ausschlusskriterien, wie maximale Porosität und Gleichmäßigkeit, objektiv und automatisiert bestimmt werden können. Veränderungen dieser Werte durch Witterungseinflüsse ließen zudem erste Rückschlüsse auf die Dauerhaftigkeit der Sichtbetonoberflächen zu. KW - Sichtbeton KW - Bildanalyse KW - Qualitätskontrolle KW - Sichtbeton KW - Oberflächenanalyse KW - Oberflächenporosität Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-45104 SN - 978-3-947197-13-2 N1 - GDCh-Monographie ; Band 54 PB - Gesellschaft Deutscher Chemiker ER - TY - CHAP A1 - Keitel, Holger A1 - Dimmig-Osburg, Andrea A1 - Zabel, Volkmar ED - Gürlebeck, Klaus ED - Könke, Carsten T1 - CHARACTERIZATION OF TIME-DEPENDENT DEFORMATIONS OF POLYMER CEMENT CONCRETE (PCC) N2 - Tests on Polymer Modified Cement Concrete (PCC) have shown significant large creep deformation. The reasons for that as well as additional material phenomena are explained in the following paper. Existing creep models developed for standard concrete are studied to determine the time-dependent deformations of PCC. These models are: model B3 by Bažant and Bajewa, the models according to Model Code 90 and ACI 209 as well as model GL2000 by Gardner and Lockman. The calculated creep strains are compared to existing experimental data of PCC and the differences are pointed out. Furthermore, an optimization of the model parameters is performed to fit the models to the experimental data to achieve a better model prognosis. KW - Angewandte Informatik KW - Angewandte Mathematik KW - Architektur KW - Computerunterstütztes Verfahren KW - Computer Science Models in Engineering; Multiscale and Multiphysical Models; Scientific Computing Y1 - 2010 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20170314-28552 UR - http://euklid.bauing.uni-weimar.de/ikm2009/paper.html SN - 1611-4086 ER - TY - CHAP A1 - Kleiner, Florian A1 - Wiegand, Torben A1 - Osburg, Andrea T1 - Eigenschaftsentwicklung epoxidharzmodifizierter Mörtel auf Zementbasis bei unterschiedlichen klimatischen Bedingungen T2 - Tagung Bauchemie der GDCh-Fachgruppe Bauchemie, 18.-20. September 2017 in Weimar N2 - Zur Erstellung von dekorativen Plastiken sollten Mörtel entwickelt werden, die eine hohe Biegezugfestigkeit aufweisen und eine breite Palette von Konsistenzen für verschiedene Anwendungsarten, wie Gießen, Spachteln oder Stampfen abdecken. Als Basis für die Rezepturen wurde ein niedrigviskoses Epoxidharzsystem gewählt, dessen Aminhärter einen Wasseranteil von 44 % beinhaltet. Dies ermöglichte es, durch Wasserzugabe verschiedene Viskositäten einzustellen. Um dieses Wasser in massiveren Bauteilen zu binden, wurde neben Sand auch Zement als Füllstoff eingesetzt. Die erstellten Rezepturen zeigten nach 56 Tagen hohe Druckfestigkeiten von über 50 N/mm². Mit zunehmendem Epoxidharzgehalt ergaben sich zwar steigende Biegezugfestigkeiten, jedoch unter Laborlagerung auch größere Längenänderungen. Diese konnten durch den Einsatz eines PCE-Fließmittels, PVA-Kurzfasern und einer optimierten Sieblinie verringert werden. Das Fließmittel verlängerte die Erhärtungszeiten jedoch auf bis zu 1,5 Tage. Zur Ermittlung der Dauerhaftigkeit des Materials wurde es für drei Wochen Temperaturen von -20 bis +60 °C, einer künstlichen Sonnenbestrahlung sowie künstlicher Beregnung ausgesetzt. Im Vergleich zur Laborlagerung ergab sich bei steigendem Epoxidharzanteil ein geringerer Schwund, während die Biegezugfestigkeit der Probeköper nur geringfügig abnahm. Rasterelektronenmikroskopische Untersuchungen zeigten, dass auch bei geringeren Epoxidharzzusätzen Störungen der Zementhydratation auftraten. Weiterhin zeigen sich bei geringen Epoxidharzzusätzen in der Matrix kugelförmige Einschlüsse, die von dispergierten Epoxidharzpartikeln stammen. KW - Bauchemie KW - Mörtel KW - Epoxidharz KW - Dauerhaftigkeit Y1 - 2017 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20211004-45067 SN - 978-3-947197-02-6 PB - Gesellschaft Deutscher Chemiker ER -