TY - JOUR A1 - Ouaer, Hocine A1 - Hosseini, Amir Hossein A1 - Amar, Menad Nait A1 - Ben Seghier, Mohamed El Amine A1 - Ghriga, Mohammed Abdelfetah A1 - Nabipour, Narjes A1 - Andersen, Pål Østebø A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin T1 - Rigorous Connectionist Models to Predict Carbon Dioxide Solubility in Various Ionic Liquids JF - Applied Sciences N2 - Estimating the solubility of carbon dioxide in ionic liquids, using reliable models, is of paramount importance from both environmental and economic points of view. In this regard, the current research aims at evaluating the performance of two data-driven techniques, namely multilayer perceptron (MLP) and gene expression programming (GEP), for predicting the solubility of carbon dioxide (CO2) in ionic liquids (ILs) as the function of pressure, temperature, and four thermodynamical parameters of the ionic liquid. To develop the above techniques, 744 experimental data points derived from the literature including 13 ILs were used (80% of the points for training and 20% for validation). Two backpropagation-based methods, namely Levenberg–Marquardt (LM) and Bayesian Regularization (BR), were applied to optimize the MLP algorithm. Various statistical and graphical assessments were applied to check the credibility of the developed techniques. The results were then compared with those calculated using Peng–Robinson (PR) or Soave–Redlich–Kwong (SRK) equations of state (EoS). The highest coefficient of determination (R2 = 0.9965) and the lowest root mean square error (RMSE = 0.0116) were recorded for the MLP-LMA model on the full dataset (with a negligible difference to the MLP-BR model). The comparison of results from this model with the vastly applied thermodynamic equation of state models revealed slightly better performance, but the EoS approaches also performed well with R2 from 0.984 up to 0.996. Lastly, the newly established correlation based on the GEP model exhibited very satisfactory results with overall values of R2 = 0.9896 and RMSE = 0.0201. KW - Maschinelles Lernen KW - Machine learning KW - OA-Publikationsfonds2020 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200107-40558 UR - https://www.mdpi.com/2076-3417/10/1/304 VL - 2020 IS - Volume 10, Issue 1, 304 PB - MDPI ER - TY - JOUR A1 - Abbaspour-Gilandeh, Yousef A1 - Molaee, Amir A1 - Sabzi, Sajad A1 - Nabipour, Narjes A1 - Shamshirband, Shahaboddin A1 - Mosavi, Amir T1 - A Combined Method of Image Processing and Artificial Neural Network for the Identification of 13 Iranian Rice Cultivars JF - agronomy N2 - Due to the importance of identifying crop cultivars, the advancement of accurate assessment of cultivars is considered essential. The existing methods for identifying rice cultivars are mainly time-consuming, costly, and destructive. Therefore, the development of novel methods is highly beneficial. The aim of the present research is to classify common rice cultivars in Iran based on color, morphologic, and texture properties using artificial intelligence (AI) methods. In doing so, digital images of 13 rice cultivars in Iran in three forms of paddy, brown, and white are analyzed through pre-processing and segmentation of using MATLAB. Ninety-two specificities, including 60 color, 14 morphologic, and 18 texture properties, were identified for each rice cultivar. In the next step, the normal distribution of data was evaluated, and the possibility of observing a significant difference between all specificities of cultivars was studied using variance analysis. In addition, the least significant difference (LSD) test was performed to obtain a more accurate comparison between cultivars. To reduce data dimensions and focus on the most effective components, principal component analysis (PCA) was employed. Accordingly, the accuracy of rice cultivar separations was calculated for paddy, brown rice, and white rice using discriminant analysis (DA), which was 89.2%, 87.7%, and 83.1%, respectively. To identify and classify the desired cultivars, a multilayered perceptron neural network was implemented based on the most effective components. The results showed 100% accuracy of the network in identifying and classifying all mentioned rice cultivars. Hence, it is concluded that the integrated method of image processing and pattern recognition methods, such as statistical classification and artificial neural networks, can be used for identifying and classification of rice cultivars. KW - Maschinelles Lernen KW - Machine learning KW - food informatics KW - big data KW - artificial neural networks KW - artificial intelligence KW - image processing KW - rice Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200123-40695 UR - https://www.mdpi.com/2073-4395/10/1/117 VL - 2020 IS - Volume 10, Issue 1, 117 PB - MDPI ER - TY - JOUR A1 - Band, Shahab S. A1 - Janizadeh, Saeid A1 - Chandra Pal, Subodh A1 - Saha, Asish A1 - Chakrabortty, Rabbin A1 - Shokri, Manouchehr A1 - Mosavi, Amir Hosein T1 - Novel Ensemble Approach of Deep Learning Neural Network (DLNN) Model and Particle Swarm Optimization (PSO) Algorithm for Prediction of Gully Erosion Susceptibility JF - Sensors N2 - This study aims to evaluate a new approach in modeling gully erosion susceptibility (GES) based on a deep learning neural network (DLNN) model and an ensemble particle swarm optimization (PSO) algorithm with DLNN (PSO-DLNN), comparing these approaches with common artificial neural network (ANN) and support vector machine (SVM) models in Shirahan watershed, Iran. For this purpose, 13 independent variables affecting GES in the study area, namely, altitude, slope, aspect, plan curvature, profile curvature, drainage density, distance from a river, land use, soil, lithology, rainfall, stream power index (SPI), and topographic wetness index (TWI), were prepared. A total of 132 gully erosion locations were identified during field visits. To implement the proposed model, the dataset was divided into the two categories of training (70%) and testing (30%). The results indicate that the area under the curve (AUC) value from receiver operating characteristic (ROC) considering the testing datasets of PSO-DLNN is 0.89, which indicates superb accuracy. The rest of the models are associated with optimal accuracy and have similar results to the PSO-DLNN model; the AUC values from ROC of DLNN, SVM, and ANN for the testing datasets are 0.87, 0.85, and 0.84, respectively. The efficiency of the proposed model in terms of prediction of GES was increased. Therefore, it can be concluded that the DLNN model and its ensemble with the PSO algorithm can be used as a novel and practical method to predict gully erosion susceptibility, which can help planners and managers to manage and reduce the risk of this phenomenon. KW - Geoinformatik KW - Maschinelles Lernen KW - gully erosion susceptibility KW - deep learning neural network KW - partical swarm optimization KW - OA-Publikationsfonds2020 Y1 - 2020 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210122-43341 UR - https://www.mdpi.com/1424-8220/20/19/5609 VL - 2020 IS - Volume 20, issue 19, article 5609 SP - 1 EP - 27 PB - MDPI CY - Basel ER - TY - JOUR A1 - Mosavi, Amir A1 - Hosseini Imani, Mahmood A1 - Zalzar, Shaghayegh A1 - Shamshirband, Shahaboddin T1 - Strategic Behavior of Retailers for Risk Reduction and Profit Increment via Distributed Generators and Demand Response Programs JF - Energies N2 - Following restructuring of power industry, electricity supply to end-use customers has undergone fundamental changes. In the restructured power system, some of the responsibilities of the vertically integrated distribution companies have been assigned to network managers and retailers. Under the new situation, retailers are in charge of providing electrical energy to electricity consumers who have already signed contract with them. Retailers usually provide the required energy at a variable price, from wholesale electricity markets, forward contracts with energy producers, or distributed energy generators, and sell it at a fixed retail price to its clients. Different strategies are implemented by retailers to reduce the potential financial losses and risks associated with the uncertain nature of wholesale spot electricity market prices and electrical load of the consumers. In this paper, the strategic behavior of retailers in implementing forward contracts, distributed energy sources, and demand-response programs with the aim of increasing their profit and reducing their risk, while keeping their retail prices as low as possible, is investigated. For this purpose, risk management problem of the retailer companies collaborating with wholesale electricity markets, is modeled through bi-level programming approach and a comprehensive framework for retail electricity pricing, considering customers’ constraints, is provided in this paper. In the first level of the proposed bi-level optimization problem, the retailer maximizes its expected profit for a given risk level of profit variability, while in the second level, the customers minimize their consumption costs. The proposed programming problem is modeled as Mixed Integer programming (MIP) problem and can be efficiently solved using available commercial solvers. The simulation results on a test case approve the effectiveness of the proposed demand-response program based on dynamic pricing approach on reducing the retailer’s risk and increasing its profit. In this paper, the decision-making problem of the retailers under dynamic pricing approach for demand response integration have been investigated. The retailer was supposed to rely on forward contracts, DGs, and spot electricity market to supply the required active and reactive power of its customers. To verify the effectiveness of the proposed model, four schemes for retailer’s scheduling problem are considered and the resulted profit under each scheme are analyzed and compared. The simulation results on a test case indicate that providing more options for the retailer to buy the required power of its customers and increase its flexibility in buying energy from spot electricity market reduces the retailers’ risk and increases its profit. From the customers’ perspective also the retailers’accesstodifferentpowersupplysourcesmayleadtoareductionintheretailelectricityprices. Since the retailer would be able to decrease its electricity selling price to the customers without losing its profitability, with the aim of attracting more customers. Inthiswork,theconditionalvalueatrisk(CVaR)measureisusedforconsideringandquantifying riskinthedecision-makingproblems. Amongallthepossibleoptioninfrontoftheretailertooptimize its profit and risk, demand response programs are the most beneficial option for both retailer and its customers. The simulation results on the case study prove that implementing dynamic pricing approach on retail electricity prices to integrate demand response programs can successfully provoke customers to shift their flexible demand from peak-load hours to mid-load and low-load hours. Comparing the simulation results of the third and fourth schemes evidences the impact of DRPs and customers’ load shifting on the reduction of retailer’s risk, as well as the reduction of retailer’s payment to contract holders, DG owners, and spot electricity market. Furthermore, the numerical results imply on the potential of reducing average retail prices up to 8%, under demand response activation. Consequently, it provides a win–win solution for both retailer and its customers. KW - Risikomanagement KW - demand response programs KW - stochastic programming KW - forward contracts KW - risk management KW - retailer KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180628-37546 UR - http://www.mdpi.com/1996-1073/11/6/1602 VL - 2018 IS - 11, 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Ghazvinei, Pezhman Taherei A1 - Darvishi, Hossein Hassanpour A1 - Mosavi, Amir A1 - Yusof, Khamaruzaman bin Wan A1 - Alizamir, Meysam A1 - Shamshirband, Shahaboddin A1 - Chau, Kwok-Wing T1 - Sugarcane growth prediction based on meteorological parameters using extreme learning machine and artificial neural network JF - Engineering Applications of Computational Fluid Mechanics N2 - Management strategies for sustainable sugarcane production need to deal with the increasing complexity and variability of the whole sugar system. Moreover, they need to accommodate the multiple goals of different industry sectors and the wider community. Traditional disciplinary approaches are unable to provide integrated management solutions, and an approach based on whole systems analysis is essential to bring about beneficial change to industry and the community. The application of this approach to water management, environmental management and cane supply management is outlined, where the literature indicates that the application of extreme learning machine (ELM) has never been explored in this realm. Consequently, the leading objective of the current research was set to filling this gap by applying ELM to launch swift and accurate model for crop production data-driven. The key learning has been the need for innovation both in the technical aspects of system function underpinned by modelling of sugarcane growth. Therefore, the current study is an attempt to establish an integrate model using ELM to predict the concluding growth amount of sugarcane. Prediction results were evaluated and further compared with artificial neural network (ANN) and genetic programming models. Accuracy of the ELM model is calculated using the statistics indicators of Root Means Square Error (RMSE), Pearson Coefficient (r), and Coefficient of Determination (R2) with promising results of 0.8, 0.47, and 0.89, respectively. The results also show better generalization ability in addition to faster learning curve. Thus, proficiency of the ELM for supplementary work on advancement of prediction model for sugarcane growth was approved with promising results. KW - Künstliche Intelligenz KW - Sustainable production KW - ELM KW - prediction KW - machine learning KW - sugarcane KW - estimation KW - growth mode KW - extreme learning machine KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181017-38129 UR - https://www.tandfonline.com/doi/full/10.1080/19942060.2018.1526119 VL - 2018 IS - 12,1 SP - 738 EP - 749 PB - Taylor & Francis ER - TY - JOUR A1 - Faizollahzadeh Ardabili, Sina A1 - Najafi, Bahman A1 - Alizamir, Meysam A1 - Mosavi, Amir A1 - Shamshirband, Shahaboddin A1 - Rabczuk, Timon T1 - Using SVM-RSM and ELM-RSM Approaches for Optimizing the Production Process of Methyl and Ethyl Esters JF - Energies N2 - The production of a desired product needs an effective use of the experimental model. The present study proposes an extreme learning machine (ELM) and a support vector machine (SVM) integrated with the response surface methodology (RSM) to solve the complexity in optimization and prediction of the ethyl ester and methyl ester production process. The novel hybrid models of ELM-RSM and ELM-SVM are further used as a case study to estimate the yield of methyl and ethyl esters through a trans-esterification process from waste cooking oil (WCO) based on American Society for Testing and Materials (ASTM) standards. The results of the prediction phase were also compared with artificial neural networks (ANNs) and adaptive neuro-fuzzy inference system (ANFIS), which were recently developed by the second author of this study. Based on the results, an ELM with a correlation coefficient of 0.9815 and 0.9863 for methyl and ethyl esters, respectively, had a high estimation capability compared with that for SVM, ANNs, and ANFIS. Accordingly, the maximum production yield was obtained in the case of using ELM-RSM of 96.86% for ethyl ester at a temperature of 68.48 °C, a catalyst value of 1.15 wt. %, mixing intensity of 650.07 rpm, and an alcohol to oil molar ratio (A/O) of 5.77; for methyl ester, the production yield was 98.46% at a temperature of 67.62 °C, a catalyst value of 1.1 wt. %, mixing intensity of 709.42 rpm, and an A/O of 6.09. Therefore, ELM-RSM increased the production yield by 3.6% for ethyl ester and 3.1% for methyl ester, compared with those for the experimental data. KW - Biodiesel KW - Optimierung KW - extreme learning machine KW - machine learning KW - response surface methodology KW - support vector machine KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20181025-38170 UR - https://www.mdpi.com/1996-1073/11/11/2889 IS - 11, 2889 SP - 1 EP - 20 PB - MDPI CY - Basel ER - TY - JOUR A1 - Mosavi, Amir A1 - Najafi, Bahman A1 - Faizollahzadeh Ardabili, Sina A1 - Shamshirband, Shahaboddin A1 - Rabczuk, Timon T1 - An Intelligent Artificial Neural Network-Response Surface Methodology Method for Accessing the Optimum Biodiesel and Diesel Fuel Blending Conditions in a Diesel Engine from the Viewpoint of Exergy and Energy Analysis JF - Energies N2 - Biodiesel, as the main alternative fuel to diesel fuel which is produced from renewable and available resources, improves the engine emissions during combustion in diesel engines. In this study, the biodiesel is produced initially from waste cooking oil (WCO). The fuel samples are applied in a diesel engine and the engine performance has been considered from the viewpoint of exergy and energy approaches. Engine tests are performed at a constant 1500 rpm speed with various loads and fuel samples. The obtained experimental data are also applied to develop an artificial neural network (ANN) model. Response surface methodology (RSM) is employed to optimize the exergy and energy efficiencies. Based on the results of the energy analysis, optimal engine performance is obtained at 80% of full load in presence of B10 and B20 fuels. However, based on the exergy analysis results, optimal engine performance is obtained at 80% of full load in presence of B90 and B100 fuels. The optimum values of exergy and energy efficiencies are in the range of 25–30% of full load, which is the same as the calculated range obtained from mathematical modeling. KW - Biodiesel KW - ANN modeling KW - biodiesel KW - Artificial Intelligence KW - diesel engines KW - energy, exergy KW - mathematical modeling KW - OA-Publikationsfonds2018 Y1 - 2018 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20180507-37467 UR - http://www.mdpi.com/1996-1073/11/4/860 VL - 2018 IS - 11, 4 PB - MDPI CY - Basel ER - TY - JOUR A1 - Shamshirband, Shahaboddin A1 - Joloudari, Javad Hassannataj A1 - GhasemiGol, Mohammad A1 - Saadatfar, Hamid A1 - Mosavi, Amir A1 - Nabipour, Narjes T1 - FCS-MBFLEACH: Designing an Energy-Aware Fault Detection System for Mobile Wireless Sensor Networks JF - Mathematics N2 - Wireless sensor networks (WSNs) include large-scale sensor nodes that are densely distributed over a geographical region that is completely randomized for monitoring, identifying, and analyzing physical events. The crucial challenge in wireless sensor networks is the very high dependence of the sensor nodes on limited battery power to exchange information wirelessly as well as the non-rechargeable battery of the wireless sensor nodes, which makes the management and monitoring of these nodes in terms of abnormal changes very difficult. These anomalies appear under faults, including hardware, software, anomalies, and attacks by raiders, all of which affect the comprehensiveness of the data collected by wireless sensor networks. Hence, a crucial contraption should be taken to detect the early faults in the network, despite the limitations of the sensor nodes. Machine learning methods include solutions that can be used to detect the sensor node faults in the network. The purpose of this study is to use several classification methods to compute the fault detection accuracy with different densities under two scenarios in regions of interest such as MB-FLEACH, one-class support vector machine (SVM), fuzzy one-class, or a combination of SVM and FCS-MBFLEACH methods. It should be noted that in the study so far, no super cluster head (SCH) selection has been performed to detect node faults in the network. The simulation outcomes demonstrate that the FCS-MBFLEACH method has the best performance in terms of the accuracy of fault detection, false-positive rate (FPR), average remaining energy, and network lifetime compared to other classification methods. KW - Vernetzung KW - wireless sensor networks KW - machine learning KW - Funktechnik KW - Sensor KW - Maschinelles Lernen KW - Internet of Things KW - OA-Publikationsfonds2019 Y1 - 2019 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20200107-40541 UR - https://www.mdpi.com/2227-7390/8/1/28 VL - 2020 IS - Volume 8, Issue 1, article 28 PB - MDPI ER - TY - JOUR A1 - Meiabadi, Mohammad Saleh A1 - Moradi, Mahmoud A1 - Karamimoghadam, Mojtaba A1 - Ardabili, Sina A1 - Bodaghi, Mahdi A1 - Shokri, Manouchehr A1 - Mosavi, Amir Hosein T1 - Modeling the Producibility of 3D Printing in Polylactic Acid Using Artificial Neural Networks and Fused Filament Fabrication JF - polymers N2 - Polylactic acid (PLA) is a highly applicable material that is used in 3D printers due to some significant features such as its deformation property and affordable cost. For improvement of the end-use quality, it is of significant importance to enhance the quality of fused filament fabrication (FFF)-printed objects in PLA. The purpose of this investigation was to boost toughness and to reduce the production cost of the FFF-printed tensile test samples with the desired part thickness. To remove the need for numerous and idle printing samples, the response surface method (RSM) was used. Statistical analysis was performed to deal with this concern by considering extruder temperature (ET), infill percentage (IP), and layer thickness (LT) as controlled factors. The artificial intelligence method of artificial neural network (ANN) and ANN-genetic algorithm (ANN-GA) were further developed to estimate the toughness, part thickness, and production-cost-dependent variables. Results were evaluated by correlation coefficient and RMSE values. According to the modeling results, ANN-GA as a hybrid machine learning (ML) technique could enhance the accuracy of modeling by about 7.5, 11.5, and 4.5% for toughness, part thickness, and production cost, respectively, in comparison with those for the single ANN method. On the other hand, the optimization results confirm that the optimized specimen is cost-effective and able to comparatively undergo deformation, which enables the usability of printed PLA objects. KW - 3D-Druck KW - Polymere KW - Maschinelles Lernen KW - 3D printing KW - machine learning KW - fused filament fabrication KW - OA-Publikationsfonds2021 Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20220110-45518 UR - https://www.mdpi.com/2073-4360/13/19/3219 VL - 2021 IS - Volume 13, issue 19, article 3219 SP - 1 EP - 21 PB - MDPI CY - Basel ER - TY - JOUR A1 - Lashkar-Ara, Babak A1 - Kalantari, Niloofar A1 - Sheikh Khozani, Zohreh A1 - Mosavi, Amir T1 - Assessing Machine Learning versus a Mathematical Model to Estimate the Transverse Shear Stress Distribution in a Rectangular Channel JF - Mathematics N2 - One of the most important subjects of hydraulic engineering is the reliable estimation of the transverse distribution in the rectangular channel of bed and wall shear stresses. This study makes use of the Tsallis entropy, genetic programming (GP) and adaptive neuro-fuzzy inference system (ANFIS) methods to assess the shear stress distribution (SSD) in the rectangular channel. To evaluate the results of the Tsallis entropy, GP and ANFIS models, laboratory observations were used in which shear stress was measured using an optimized Preston tube. This is then used to measure the SSD in various aspect ratios in the rectangular channel. To investigate the shear stress percentage, 10 data series with a total of 112 different data for were used. The results of the sensitivity analysis show that the most influential parameter for the SSD in smooth rectangular channel is the dimensionless parameter B/H, Where the transverse coordinate is B, and the flow depth is H. With the parameters (b/B), (B/H) for the bed and (z/H), (B/H) for the wall as inputs, the modeling of the GP was better than the other one. Based on the analysis, it can be concluded that the use of GP and ANFIS algorithms is more effective in estimating shear stress in smooth rectangular channels than the Tsallis entropy-based equations. KW - Maschinelles Lernen KW - smooth rectangular channel KW - Tsallis entropy KW - genetic programming KW - artificial intelligence KW - machine learning KW - big data KW - computational hydraulics Y1 - 2021 U6 - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:gbv:wim2-20210504-44197 UR - https://www.mdpi.com/2227-7390/9/6/596 VL - 2021 IS - Volume 9, Issue 6, Article 596 PB - MDPI CY - Basel ER -